/(yes|true)/ This option affects how clients respond to Samba and is one of the most important settings in the smb.conf file. The option sets the "security mode bit" in replies to protocol negotiations with smbd 8 to turn share level security on or off. Clients decide based on this bit whether (and how) to transfer user and password information to the server. The default is security = user, as this is the most common setting needed when talking to Windows 98 and Windows NT. The alternatives are security = ads or security = domain , which support joining Samba to a Windows domain, along with security = share and security = server, both of which are deprecated. In versions of Samba prior to 2.0.0, the default was security = share mainly because that was the only option at one stage. You should use security = user and if you want to mainly setup shares without a password (guest shares). This is commonly used for a shared printer server. It is possible to use smbd in a hybrid mode where it is offers both user and share level security under different . The different settings will now be explained. SECURITY = AUTO This is the default security setting in Samba, and causes Samba to consult the parameter (if set) to determine the security mode. SECURITY = USER If is not specified, this is the default security setting in Samba. With user-level security a client must first "log-on" with a valid username and password (which can be mapped using the parameter). Encrypted passwords (see the parameter) can also be used in this security mode. Parameters such as and if set are then applied and may change the UNIX user to use on this connection, but only after the user has been successfully authenticated. Note that the name of the resource being requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing the server to automatically map unknown users into the . See the parameter for details on doing this. See also the section NOTE ABOUT USERNAME/PASSWORD VALIDATION. SECURITY = DOMAIN This mode will only work correctly if net 8 has been used to add this machine into a Windows NT Domain. It expects the parameter to be set to yes. In this mode Samba will try to validate the username/password by passing it to a Windows NT Primary or Backup Domain Controller, in exactly the same way that a Windows NT Server would do. Note that a valid UNIX user must still exist as well as the account on the Domain Controller to allow Samba to have a valid UNIX account to map file access to. Note that from the client's point of view security = domain is the same as security = user. It only affects how the server deals with the authentication, it does not in any way affect what the client sees. Note that the name of the resource being requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing the server to automatically map unknown users into the . See the parameter for details on doing this. See also the section NOTE ABOUT USERNAME/PASSWORD VALIDATION. See also the parameter and the parameter. SECURITY = SHARE This option is deprecated as it is incompatible with SMB2 When clients connect to a share level security server, they need not log onto the server with a valid username and password before attempting to connect to a shared resource (although modern clients such as Windows 95/98 and Windows NT will send a logon request with a username but no password when talking to a security = share server). Instead, the clients send authentication information (passwords) on a per-share basis, at the time they attempt to connect to that share. Note that smbd ALWAYS uses a valid UNIX user to act on behalf of the client, even in security = share level security. As clients are not required to send a username to the server in share level security, smbd uses several techniques to determine the correct UNIX user to use on behalf of the client. A list of possible UNIX usernames to match with the given client password is constructed using the following methods : If the parameter is set, then all the other stages are missed and only the username is checked. Is a username is sent with the share connection request, then this username (after mapping - see ), is added as a potential username. If the client did a previous logon request (the SessionSetup SMB call) then the username sent in this SMB will be added as a potential username. The name of the service the client requested is added as a potential username. The NetBIOS name of the client is added to the list as a potential username. Any users on the list are added as potential usernames. If the guest only parameter is not set, then this list is then tried with the supplied password. The first user for whom the password matches will be used as the UNIX user. If the guest only parameter is set, or no username can be determined then if the share is marked as available to the guest account, then this guest user will be used, otherwise access is denied. Note that it can be very confusing in share-level security as to which UNIX username will eventually be used in granting access. See also the section NOTE ABOUT USERNAME/PASSWORD VALIDATION. SECURITY = SERVER In this depicted mode Samba will try to validate the username/password by passing it to another SMB server, such as an NT box. If this fails it will revert to security = user. It expects the parameter to be set to yes, unless the remote server does not support them. However note that if encrypted passwords have been negotiated then Samba cannot revert back to checking the UNIX password file, it must have a valid smbpasswd file to check users against. See the chapter about the User Database in the Samba HOWTO Collection for details on how to set this up. This mode of operation has significant pitfalls since it is more vulnerable to man-in-the-middle attacks and server impersonation. In particular, this mode of operation can cause significant resource consumption on the PDC, as it must maintain an active connection for the duration of the user's session. Furthermore, if this connection is lost, there is no way to reestablish it, and further authentications to the Samba server may fail (from a single client, till it disconnects). If the client selects NTLMv2 authentication, then this mode of operation will fail From the client's point of view, security = server is the same as security = user. It only affects how the server deals with the authentication, it does not in any way affect what the client sees. This option is deprecated, and may be removed in future Note that the name of the resource being requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing the server to automatically map unknown users into the . See the parameter for details on doing this. See also the section NOTE ABOUT USERNAME/PASSWORD VALIDATION. See also the parameter and the parameter. SECURITY = ADS In this mode, Samba will act as a domain member in an ADS realm. To operate in this mode, the machine running Samba will need to have Kerberos installed and configured and Samba will need to be joined to the ADS realm using the net utility. Note that this mode does NOT make Samba operate as a Active Directory Domain Controller. Read the chapter about Domain Membership in the HOWTO for details. realm encrypt passwords USER DOMAIN