&author.jelmer; &author.jht; &author.jerry; June 30, 2003 This chapter deals exclusively with the differences between Samba-3.0.0 and Samba-2.2.8a. It points out where configuration parameters have changed, and provides a simple guide for the move from 2.2.x to 3.0.0. Samba-3.0.0 default behavior should be approximately the same as Samba-2.2.x. The default behavior when the new parameter is not defined in the &smb.conf; file provides the same default behavior as Samba-2.2.x with Yes, and will use the smbpasswd database. So why say that behavior should be approximately the same as Samba-2.2.x? Because Samba-3.0.0 can negotiate new protocols, such as support for native Unicode, that may result in differing protocol code paths being taken. The new behavior under such circumstances is not exactly the same as the old one. The good news is that the domain and machine SIDs will be preserved across the upgrade. If the Samba-2.2.x system was using an LDAP backend, and there is no time to update the LDAP database, then make sure that ldapsam_compat is specified in the &smb.conf; file. For the rest, behavior should remain more or less the same. At a later date, when there is time to implement a new Samba-3 compatible LDAP backend, it is possible to migrate the old LDAP database to the new one through use of the pdbedit. See The pdbedit Command. The major new features are: Active Directory support. This release is able to join an ADS realm as a member server and authenticate users using LDAP/Kerberos. Unicode support. Samba will now negotiate Unicode on the wire and internally there is a much better infrastructure for multi-byte and Unicode character sets. New authentication system. The internal authentication system has been almost completely rewritten. Most of the changes are internal, but the new authoring system is also very configurable. New filename mangling system. The filename mangling system has been completely rewritten. An internal database now stores mangling maps persistently. New net command. A new net command has been added. It is somewhat similar to the net command in Windows. Eventually, we plan to replace a bunch of other utilities (such as smbpasswd) with subcommands in net. Samba now negotiates NT-style status32 codes on the wire. This considerably improves error handling. Better Windows 200x/XP printing support including publishing printer attributes in Active Directory. New loadable RPC modules for passdb backends and character sets. New default dual-daemon winbindd support for better performance. Support for migrating from a Windows NT 4.0 domain to a Samba domain and maintaining user, group and domain SIDs. Support for establishing trust relationships with Windows NT 4.0 Domain Controllers. Initial support for a distributed Winbind architecture using an LDAP directory for storing SID to UID/GID mappings. Major updates to the Samba documentation tree. Full support for client and server SMB signing to ensure compatibility with default Windows 2003 security settings. Plus lots of other improvements! This section contains a brief listing of changes to &smb.conf; options in the 3.0.0 release. Please refer to the smb.conf(5) man page for complete descriptions of new or modified parameters. (Ordered Alphabetically): admin log alternate permissions character set client codepage code page directory coding system domain admin group domain guest group force unknown acl user nt smb support post script printer driver printer driver file printer driver location status strip dot total print jobs use rhosts valid chars vfs options (New parameters have been grouped by function): Remote Management abort shutdown script shutdown script User and Group Account Management: add group script add machine script add user to group script algorithmic rid base delete group script delete user from group script passdb backend set primary group script Authentication: auth methods realm Protocol Options: client lanman auth client NTLMv2 auth client schannel client signing client use spnego disable netbios ntlm auth paranoid server security server schannel server signing smb ports use spnego File Service: get quota command hide special files hide unwriteable files hostname lookups kernel change notify mangle prefix map acl inherit msdfs proxy set quota command use sendfile vfs objects Printing: max reported print jobs Unicode and Character Sets: display charset dos charset unicode UNIX charset SID to UID/GID Mappings: idmap backend idmap gid idmap uid winbind enable local accounts winbind trusted domains only template primary group enable rid algorithm LDAP: ldap delete dn ldap group suffix ldap idmap suffix ldap machine suffix ldap passwd sync ldap user suffix General Configuration: preload modules privatedir encrypt passwords (enabled by default) mangling method (set to hash2 by default) passwd chat passwd program password server restrict anonymous (integer value) security (new ads value) strict locking (enabled by default) winbind cache time (increased to 5 minutes) winbind uid (deprecated in favor of idmap uid) winbind gid (deprecated in favor of idmap gid) This section contains brief descriptions of any new databases introduced in Samba-3. Please remember to backup your existing ${lock directory}/*tdb before upgrading to Samba-3. Samba will upgrade databases as they are opened (if necessary), but downgrading from 3.0 to 2.2 is an unsupported path. The new tdb files are described in the next table. Name Description Backup? account_policy User policy settings yes gencache Generic caching db no group_mapping Mapping table from Windows groups/SID to UNIX groups yes idmap new ID map table from SIDS to UNIX UIDs/GIDs yes namecache Name resolution cache entries no netlogon_unigrp Cache of universal group membership obtained when operating as a member of a Windows domain no printing/*.tdb Cached output from `lpq command' created on a per print service basis no registry Read-only Samba registry skeleton that provides support for exporting various db tables via the winreg RPCs no The following issues are known changes in behavior between Samba-2.2 and Samba-3 that may affect certain installations of Samba. When operating as a member of a Windows domain, Samba-2.2 would map any users authenticated by the remote DC to the guest account if a uid could not be obtained via the getpwnam() call. Samba-3 rejects the connection as NT_STATUS_LOGON_FAILURE. There is no current work around to re-establish the Samba-2.2 behavior. When adding machines to a Samba-2.2 controlled domain, the add user script was used to create the UNIX identity of the Machine Trust Account. Samba-3 introduces a new add machine script that must be specified for this purpose. Samba-3 will not fall back to using the add user script in the absence of an add machine script. There have been a few new changes that Samba administrators should be aware of when moving to Samba-3. Encrypted passwords have been enabled by default in order to interoperate better with out-of-the-box Windows client installations. This does mean that either (a) a Samba account must be created for each user, or (b) encrypt passwords = no must be explicitly defined in &smb.conf;. Inclusion of new ads option for integration with an Active Directory domain using the native Windows Kerberos 5 and LDAP protocols. Samba-3 also includes the possibility of setting up chains of authentication methods () and account storage backends (). Please refer to the &smb.conf; man page and Account Information Databases, for details. While both parameters assume sane default values, it is likely that you will need to understand what the values actually mean in order to ensure Samba operates correctly. pdbedit Certain functions of the smbpasswd tool have been split between the new smbpasswd utility, the net tool and the new pdbedit utility. See the respective man pages for details. This section outlines the new features effecting Samba/LDAP integration. A new object class (sambaSamAccount) has been introduced to replace the old sambaAccount. This change aids us in the renaming of attributes to prevent clashes with attributes from other vendors. There is a conversion script (examples/LDAP/convertSambaAccount) to modify an LDIF file to the new schema. Example: &prompt;ldapsearch .... -LLL -b "ou=people,dc=..." > old.ldif &prompt;convertSambaAccount --sid <DOM SID> --input old.ldif --output new.ldif The <DOM SID> can be obtained by running &prompt;net getlocalsid <DOMAINNAME> on the Samba PDC as root. Under Samba-2.x the Domain SID can be obtained by executing: &prompt;smbpasswd -S <DOMAINNAME> The old sambaAccount schema may still be used by specifying the ldapsam_compat passdb backend. However, the sambaAccount and associated attributes have been moved to the historical section of the schema file and must be uncommented before use if needed. The Samba-2.2 object class declaration for a sambaAccount has not changed in the Samba-3 samba.schema file. Other new object classes and their uses include: sambaDomain &smbmdash; domain information used to allocate RIDs for users and groups as necessary. The attributes are added in ldap suffix directory entry automatically if an idmap UID/GID range has been set and the ldapsam passdb backend has been selected. sambaGroupMapping &smbmdash; an object representing the relationship between a posixGroup and a Windows group/SID. These entries are stored in the ldap group suffix and managed by the net groupmap command. sambaUNIXIdPool &smbmdash; created in the ldap idmap suffix entry automatically and contains the next available idmap UID and idmap GID. sambaIdmapEntry &smbmdash; object storing a mapping between a SID and a UNIX UID/GID. These objects are created by the idmap_ldap module as needed. The following new smb.conf parameters have been added to aid in directing certain LDAP queries when passdb backend = ldapsam://... has been specified. ldap suffix &smbmdash; used to search for user and computer accounts. ldap user suffix &smbmdash; used to store user accounts. ldap machine suffix &smbmdash; used to store Machine Trust Accounts. ldap group suffix &smbmdash; location of posixGroup/sambaGroupMapping entries. ldap idmap suffix &smbmdash; location of sambaIdmapEntry objects. If an ldap suffix is defined, it will be appended to all of the remaining sub-suffix parameters. In this case, the order of the suffix listings in smb.conf is important. Always place the ldap suffix first in the list. Due to a limitation in Samba's &smb.conf; parsing, you should not surround the DNs with quotation marks. Samba-3 supports an ldap backend for the idmap subsystem. The following options inform Samba that the idmap table should be stored on the directory server onterose in the "ou=idmap,dc=quenya,dc=org" partition. [global] ... ldap:ldap://onterose/ ou=idmap,dc=quenya,dc=org 40000-50000 40000-50000 This configuration allows Winbind installations on multiple servers to share a UID/GID number space, thus avoiding the interoperability problems with NFS that were present in Samba-2.2.