&author.jht; June 30, 2005 Since the release of the first edition of this book there have been repeated requests to better document configuration techniques that may help a network administrator to get more out of Samba. Some users have asked for documentation regarding the use of the file-name parameter. Commencing around mid-2004 there has been increasing interest in the ability to host multiple Samba servers on one machine. There has also been an interest in the hosting of multiple Samba server personalities on one server. Feedback from technical reviewers made the inclusion of this chapter a necessity. So finally, here is an attempt to answer the questions that have to date not been adequately addressed. Additional user input is welcome as it will help this chapter to mature. What is presented here is just a small beginning. There are a number of ways in which multiple servers can be hosted on a single Samba server. Multiple server hosting makes it possible to host multiple domain controllers on one machine. Each such machine is independent, and each can be stopped or started without affecting another. Sometimes it is desirable to host multiple servers, each with its own security mode. For example, a single UNIX/Linux host may be a domain member server (DMS) as well as a generic anonymous print server. In this case, only domain member machines and domain users can access the DMS, but even guest users can access the generic print server. Another example of a situation where it may be beneficial to host a generic (anonymous) server is to host a CDROM server. Some environments dictate the need to have separate servers, each with their own resources, each of which are accessible only by certain users or groups. This is one of the simple, but highly effective, capabilities The use of multiple server hosting involves running multiple separate instances of Samba, each with it's own configuration file. This method is complicated by the fact that each instance of &nmbd;, &smbd; and &winbindd; must have write access to entirely separate TDB files. The ability to keep separate the TDB files used by &nmbd;, &smbd; and &winbindd; can be enabled either by recompiling Samba for each server hosted so each has its own default TDB directories, or by configuring these in the &smb.conf; file, in which case each instance of &nmbd;, &smbd; and &winbindd; must be told to start up with its own &smb.conf; configuration file. Each instance should operate on its own IP address (that independent IP address can be an IP Alias). Each instance of &nmbd;, &smbd; and &winbindd; should listen only on its own IP socket. This can be secured using the parameter. Each instance of the Samba server will have its own SID also, this means that the servers are discrete and independent of each other. The user of multiple server hosting is non-trivial, and requires careful configuration of each aspect of process management and start up. The &smb.conf; parameters that must be carefully configured includes: , ,, , , , , . Those who elect to use this method of creating multiple Samba servers must have the ability to read and follow the Samba source code, and to modify it as needed. This mode of deployment is considered beyond the scope of this book. However, if someone will contribute more comprehensive documentation we will gladly review it, and if it is suitable extend this section of this chapter. Until such documentation becomes available the hosting of multiple samba servers on a single host is considered not supported for Samba-3 by the Samba Team. Samba has the ability to host multiple virtual servers, each of which have their own personality. This is achieved by configuring an &smb.conf; file that is common to all personalities hosted. Each server personality is hosted using its own name, and each has its own distinct section. Each server may have its own stanzas for services and meta-services. When hosting multiple virtual servers, each with their own personality, each can be in a different workgroup. Only the primary server can be a domain member or a domain controller. The personality is defined by the combination of the mode it is operating in, the it has, and the that is defined for it. This configuration style can be used either with NetBIOS names, or using NetBIOS-less SMB over TCP services. If run using NetBIOS mode (the most common method) it is important that the parameter 139 should be specified in the primary &smb.conf; file. Failure to do this will result in Samba operating over TCP port 445 and problematic operation at best, and at worst only being able to obtain the functionality that is specified in the primary &smb.conf; file. The use of NetBIOS over TCP/IP using only TCP port 139 means that the use of the %L macro is fully enabled. If the 139 is not specified (the default is 445 139, or if the value of this parameter is set at 139 445 then the %L parameter is not serviceable. It is possible to host multiple servers, each with their own personality, using port 445 (the NetBIOS-less SMB port), in which case the %i parameter can be used to provide separate server identities (by IP Address). Each can have its own mode. It will be necessary to use the , and IP aliases in addition to the parameters to create the virtual servers. This method is considerably more complex than that using NetBIOS names only using TCP port 139. Consider an example environment that consists of a standalone, user-mode security Samba server and a read-only Windows 95 file server that has to be replaced. Instead of replacing the Windows 95 machine with a new PC, it is possible to add this server as a read-only anonymous file server that is hosted on the Samba server. Here are some parameters: The Samba server is called ELASTIC, its workgroup name is ROBINSNEST. The CDROM server is called CDSERVER and its workgroup is ARTSDEPT. A possible implementation is shown here: The &smb.conf; file for the master server is shown in Elastic smb.conf File. This file is placed in the /etc/samba directory. Only the &nmbd; and the &smbd; daemons are needed. When started the server will appear in Windows Network Neighborhood as the machine ELASTIC under the workgroup ROBINSNEST. It is helpful if the Windows clients that must access this server are also in the workgroup ROBINSNEST as this will make browsing much more reliable. Global parameters ROBINSNEST ELASTIC CDSERVER 139 cups Yes No cups /etc/samba/smb-%L.conf Home Directories %S No No Data /data No All Printers /var/spool/samba 0600 Yes Yes Yes No The configuration file for the CDROM server is listed in CDROM Server smb-cdserver.conf file. This file is called smb-cdserver.conf and it should be located in the /etc/samba directory. Machines that are in the workgroup ARTSDEPT will be able to browse this server freely. Global parameters ARTSDEPT CDSERVER Bad User Yes CDROM Share /export/cddata Yes Yes The two servers have different resources and are in separate workgroups. The server ELASTIC can only be accessed by uses who have an appropriate account on the host server. All users will be able to access the CDROM data that is stored in the /export/cddata directory. File system permissions should set so that the others user has read-only access to the directory and its contents. The files can be owned by root (any user other than the nobody account). In this example, the requirement is for a primary domain controller for the domain called MIDEARTH. The PDC will be called MERLIN. An extra machine called SAURON is required. Each machine will have only its own shares. Both machines belong to the same domain/workgroup. The master &smb.conf; file is shown in the Master smb.conf File Global Section. The two files that specify the share information for each server are shown in the smb-merlin.conf File Share Section, and the smb-sauron.conf File Share Section. All three files are locate in the /etc/samba directory. Global parameters MIDEARTH MERLIN SAURON tdbsam 139 0 CUPS No /usr/sbin/useradd -m '%u' /usr/sbin/userdel -r '%u' /usr/sbin/groupadd '%g' /usr/sbin/groupdel '%g' /usr/sbin/usermod -G '%g' '%u' /usr/sbin/useradd -s /bin/false -d /var/lib/nobody '%u' scripts\login.bat X: Yes Yes Yes CUPS /etc/samba/smb-%L.conf Global parameters MIDEARTH MERLIN Home Directories %S No No Data /data No NETLOGON /var/lib/samba/netlogon Yes No All Printers /var/spool/samba Yes Yes No Global parameters MIDEARTH SAURON Web Pages /srv/www/htdocs No