&author.jeremy; &author.jerry; &author.jht; This mode of server operation involves the samba machine being made a member of a domain security context. This means by definition that all user authentication will be done from a centrally defined authentication regime. The authentication regime may come from an NT3/4 style (old domain technology) server, or it may be provided from an Active Directory server (ADS) running on MS Windows 2000 or later. Of course it should be clear that the authentication back end itself could be from any distributed directory architecture server that is supported by Samba. This can be LDAP (from OpenLDAP), or Sun's iPlanet, of NetWare Directory Server, etc. Please refer to the section on Howto configure Samba as a Primary Domain Controller and for more information regarding how to create a domain machine account for a domain member server as well as for information regarding how to enable the samba domain member machine to join the domain and to be fully trusted by it. Assumptions: NetBIOS name: SERV1 Win2K/NT domain name: DOM Domain's PDC NetBIOS name: DOMPDC Domain's BDC NetBIOS names: DOMBDC1 and DOMBDC2 First, you must edit your &smb.conf; file to tell Samba it should now use domain security. Change (or add) your security = line in the [global] section of your &smb.conf; to read: security = domain Next change the workgroup = line in the [global] section to read: workgroup = DOM as this is the name of the domain we are joining. You must also have the parameter encrypt passwords set to yes in order for your users to authenticate to the NT PDC. Finally, add (or modify) a password server = line in the [global] section to read: password server = DOMPDC DOMBDC1 DOMBDC2 These are the primary and backup domain controllers Samba will attempt to contact in order to authenticate users. Samba will try to contact each of these servers in order, so you may want to rearrange this list in order to spread out the authentication load among domain controllers. Alternatively, if you want smbd to automatically determine the list of Domain controllers to use for authentication, you may set this line to be : password server = * This method, allows Samba to use exactly the same mechanism that NT does. This method either broadcasts or uses a WINS database in order to find domain controllers to authenticate against. In order to actually join the domain, you must run this command: root# net join -S DOMPDC -UAdministrator%password If the -S DOMPDC argument is not given then the domain name will be obtained from smb.conf. as we are joining the domain DOM and the PDC for that domain (the only machine that has write access to the domain SAM database) is DOMPDC. The Administrator%password is the login name and password for an account which has the necessary privilege to add machines to the domain. If this is successful you will see the message: Joined domain DOM. or Joined 'SERV1' to realm 'MYREALM' in your terminal window. See the net(8) man page for more details. This process joins the server to the domain without having to create the machine trust account on the PDC beforehand. This command goes through the machine account password change protocol, then writes the new (random) machine account password for this Samba server into a file in the same directory in which an smbpasswd file would be stored - normally : /usr/local/samba/private/secrets.tdb This file is created and owned by root and is not readable by any other user. It is the key to the domain-level security for your system, and should be treated as carefully as a shadow password file. Finally, restart your Samba daemons and get ready for clients to begin using domain security! Currently, domain security in Samba doesn't free you from having to create local Unix users to represent the users attaching to your server. This means that if domain user DOM\fred attaches to your domain security Samba server, there needs to be a local Unix user fred to represent that user in the Unix filesystem. This is very similar to the older Samba security mode security = server, where Samba would pass through the authentication request to a Windows NT server in the same way as a Windows 95 or Windows 98 server would. Please refer to the Winbind paper for information on a system to automatically assign UNIX uids and gids to Windows NT Domain users and groups. The advantage to domain-level security is that the authentication in domain-level security is passed down the authenticated RPC channel in exactly the same way that an NT server would do it. This means Samba servers now participate in domain trust relationships in exactly the same way NT servers do (i.e., you can add Samba servers into a resource domain and have the authentication passed on from a resource domain PDC to an account domain PDC). In addition, with security = server every Samba daemon on a server has to keep a connection open to the authenticating server for as long as that daemon lasts. This can drain the connection resources on a Microsoft NT server and cause it to run out of available connections. With security = domain, however, the Samba daemons connect to the PDC/BDC only for as long as is necessary to authenticate the user, and then drop the connection, thus conserving PDC connection resources. And finally, acting in the same manner as an NT server authenticating to a PDC means that as part of the authentication reply, the Samba server gets the user identification information such as the user SID, the list of NT groups the user belongs to, etc. Much of the text of this document was first published in the Web magazine LinuxWorld as the article Doing the NIS/NT Samba. This is a rough guide to setting up Samba 3.0 with kerberos authentication against a Windows2000 KDC. You must use at least the following 3 options in smb.conf: realm = YOUR.KERBEROS.REALM security = ADS encrypt passwords = yes In case samba can't figure out your ads server using your realm name, use the ads server option in smb.conf: ads server = your.kerberos.server You do *not* need a smbpasswd file, and older clients will be authenticated as if security = domain, although it won't do any harm and allows you to have local users not in the domain. I expect that the above required options will change soon when we get better active directory integration. Note: you will need the krb5 workstation, devel, and libs installed The minimal configuration for krb5.conf is: [realms] YOUR.KERBEROS.REALM = { kdc = your.kerberos.server } Test your config by doing a kinit USERNAME@REALM and making sure that your password is accepted by the Win2000 KDC. The realm must be uppercase or you will get "Cannot find KDC for requested realm while getting initial credentials" error Time between the two servers must be synchronized. You will get a "kinit(v5): Clock skew too great while getting initial credentials" if the time difference is more than five minutes. You also must ensure that you can do a reverse DNS lookup on the IP address of your KDC. Also, the name that this reverse lookup maps to must either be the netbios name of the KDC (ie. the hostname with no domain attached) or it can alternatively be the netbios name followed by the realm. The easiest way to ensure you get this right is to add a /etc/hosts entry mapping the IP address of your KDC to its netbios name. If you don't get this right then you will get a "local error" when you try to join the realm. If all you want is kerberos support in &smbclient; then you can skip straight to Test with &smbclient; now. Creating a computer account and testing your servers is only needed if you want kerberos support for &smbd; and &winbindd;. As a user that has write permission on the Samba private directory (usually root) run: net join -U Administrator%password "ADS support not compiled in" Samba must be reconfigured (remove config.cache) and recompiled (make clean all install) after the kerberos libs and headers are installed. net join prompts for user name You need to login to the domain using kinit USERNAME@REALM. USERNAME must be a user who has rights to add a machine to the domain. If the join was successful, you will see a new computer account with the NetBIOS name of your Samba server in Active Directory (in the "Computers" folder under Users and Computers. On a Windows 2000 client try net use * \\server\share. You should be logged in with kerberos without needing to know a password. If this fails then run klist tickets. Did you get a ticket for the server? Does it have an encoding type of DES-CBC-MD5 ? On your Samba server try to login to a Win2000 server or your Samba server using &smbclient; and kerberos. Use &smbclient; as usual, but specify the -k option to choose kerberos authentication. You must change administrator password at least once after DC install, to create the right encoding types w2k doesn't seem to create the _kerberos._udp and _ldap._tcp in their defaults DNS setup. Maybe fixed in service packs?