&author.jht; &author.mimir; April 3, 2003 Samba-3 supports NT4 style domain trust relationships. This is feature that many sites will want to use if they migrate to Samba-3 from and NT4 style domain and do NOT want to adopt Active Directory or an LDAP based authentication back end. This section explains some background information regarding trust relationships and how to create them. It is now possible for Samba3 to NT4 trust (and vica versa), as well as Samba3 to Samba3 trusts. MS Windows NT3.x/4.0 type security domains employ a non-hierarchical security structure. The limitations of this architecture as it affects the scalability of MS Windows networking in large organisations is well known. Additionally, the flat-name space that results from this design significantly impacts the delegation of administrative responsibilities in large and diverse organisations. Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means of circumventing the limitations of the older technologies. Not every organisation is ready or willing to embrace ADS. For small companies the older NT4 style domain security paradigm is quite adequate, there thus remains an entrenched user base for whom there is no direct desire to go through a disruptive change to adopt ADS. Microsoft introduced with MS Windows NT the ability to allow differing security domains to affect a mechanism so that users from one domain may be given access rights and privileges in another domain. The language that describes this capability is couched in terms of Trusts. Specifically, one domain will trust the users from another domain. The domain from which users are available to another security domain is said to be a trusted domain. The domain in which those users have assigned rights and privileges is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only, thus if users in both domains are to have privileges and rights in each others' domain, then it is necessary to establish two (2) relationships, one in each direction. In an NT4 style MS security domain, all trusts are non-transitive. This means that if there are three (3) domains (let's call them RED, WHITE, and BLUE) where RED and WHITE have a trust relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no implied trust between the RED and BLUE domains. ie: Relationships are explicit and not transitive. New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE domains above, with Windows 2000 and ADS the RED and BLUE domains CAN trust each other. This is an inherent feature of ADS domains. There are two steps to creating an interdomain trust relationship. For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager. To affect a two way trust relationship it is necessary for each domain administrator to make available (for use by an external domain) it's security resources. This is done from the Domain User Manager Policies entry on the menu bar. From the Policy menu, select Trust Relationships, then next to the lower box that is labelled "Permitted to Trust this Domain" are two buttons, "Add" and "Remove". The "Add" button will open a panel in which needs to be entered the remote domain that will be able to assign user rights to your domain. In addition it is necessary to enter a password that is specific to this trust relationship. The password needs to be typed twice (for standard confirmation). A trust relationship will work only when the other (trusting) domain makes the appropriate connections with the trusted domain. To consumate the trust relationship the administrator will launch the Domain User Manager, from the menu select Policies, then select Trust Relationships, then click on the "Add" button that is next to the box that is labelled "Trusted Domains". A panel will open in which must be entered the name of the remote domain as well as the password assigned to that trust. This descitpion is meant to be a fairly short introduction about how to set up a Samba server so that it could participate in interdomain trust relationships. Trust relationship support in Samba is in its early stage, so lot of things doesn't work yet. Each of the procedures described below is treated as they were performed with Windows NT4 Server on one end. The remote end could just as well be another Samba-3 domain. It can be clearly seen, after reading this document, that combining Samba-specific parts of what's written below leads to trust between domains in purely Samba environment. In order to set Samba PDC to be trusted party of the relationship first you need to create special account for domain that will be the trusting party. To do that, you can use 'smbpasswd' utility. Creating the trusted domain account is very similiar to creating trusted machine account. Suppose, your domain is called SAMBA, and the remote domain is called RUMBA. The first step will be to issue this command from your favourite shell: deity# smbpasswd -a -i rumba New SMB password: XXXXXXXX Retype SMB password: XXXXXXXX Added user rumba$ where -a means to add a new account into the passdb database and -i means: ''create this account with the InterDomain trust flag'' The account name will be 'rumba$' (the name of the remote domain) After issuing this command you'll be asked for typing account's password. You can use any password you want, but be aware that Windows NT will not change this password until 7 days have passed since account creating. After command returns successfully, you can look at your new account's entry (in the way depending on your configuration) and see that account's name is really RUMBA$ and it has 'I' flag in the flags field. Now you're ready to confirm the trust by establishing it from Windows NT Server. Open 'User Manager for Domains' and from menu 'Policies' select 'Trust Relationships...'. Right beside 'Trusted domains' list box press 'Add...' button. You'll be prompted for trusted domain name and the relationship's password. Type in SAMBA, as this is your domain name, and the password you've just used for account creation. Press OK and, if everything went fine, you will see 'Trusted domain relationship successfully established' message. Well done. This time activities are somewhat reversed. Again, we'll assume that your domain controlled by Samba PDC is called SAMBA and NT-controlled domain is called RUMBA. The very first thing is to add account for SAMBA domain on RUMBA's PDC. Launch the Domain User Manager, then from the menu select 'Policies', 'Trust Relationships'. Now, next to 'Trusted Domains' box press the 'Add' button, and type in the name of the trusted domain (SAMBA) and password securing the relationship. Password can be arbitrarily chosen, the more because it's easy to change it from Samba server whenever you want. After confirming password your account is ready and waiting. Now it's Samba's turn. Using your favourite shell while being logged on as root, issue this command: deity# net rpc trustdom establish rumba You'll be prompted for password you've just typed on your Windows NT4 Server box. Don't worry if you will see the error message with returned code of NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT. It means the password you gave is correct and the NT4 Server says the account is ready for trusting your domain and not for ordinary connection. After that, be patient it can take a while (especially in large networks), you should see 'Success' message. Contgratulations! Your trust relationship has just been established. Note that you have to run this command as root, since you need write access to your secrets.tdb file.