SAMBA Project Documentation

Edited by

Jelmer R. Vernooij

John H. Terpstra

Gerald (Jerry) Carter

Monday April 21, 2003

Abstract

This book is a collection of HOWTOs added to Samba documentation over the years. Samba is always under development, and so is its' documentation. This release of the documentation represents a major revision or layout as well as contents. The most recent version of this document can be found at http://www.samba.org/ on the "Documentation" page. Please send updates to Jelmer Vernooij, John H. Terpstra or Gerald (Jerry) Carter.

The Samba-Team would like to express sincere thanks to the many people who have with or without their knowledge contributed to this update. The size and scope of this project would not have been possible without significant community contribution. A not insignificant number of ideas for inclusion (if not content itself) has been obtained from a number of Unofficial HOWTOs - to each such author a big "Thank-you" is also offered. Please keep publishing your Unofficial HOWTOs - they are a source of inspiration and application knowledge that is most to be desired by many Samba users and administrators.


Table of Contents

Legal Notice
Attributions
I. General Installation
1. Introduction to Samba
Background
Terminology
Related Projects
SMB Methodology
Epilogue
Miscellaneous
2. How to Install and Test SAMBA
Obtaining and Installing Samba
Configuring Samba (smb.conf)
Configuration file syntax
Example Configuration
SWAT
List Shares Available on the Server
Connect with a UNIX Client
Connect from a Remote SMB Client
What If Things Don't Work?
Common Errors
Large Number of smbd Processes
Error Message: open_oplock_ipc
The network name cannot be found
3. Fast Start for the Impatient
Note
II. Server Configuration Basics
4. Server Types and Security Modes
Features and Benefits
Server Types
Samba Security Modes
User Level Security
Share Level Security
Domain Security Mode (User Level Security)
ADS Security Mode (User Level Security)
Server Security (User Level Security)
Password Checking
Common Errors
What Makes Samba a Server?
What Makes Samba a Domain Controller?
What Makes Samba a Domain Member?
Constantly Losing Connections to Password Server
5. Domain Control
Features and Benefits
Basics of Domain Control
Domain Controller Types
Preparing for Domain Control
Domain Control Example Configuration
Samba ADS Domain Control
Domain and Network Logon Configuration
Domain Network Logon Service
Security Mode and Master Browsers
Common Errors
$ Cannot Be Included in Machine Name
Joining Domain Fails Because of Existing Machine Account
The System Cannot Log You On (C000019B)
The Machine Trust Account Is Not Accessible
Account Disabled
Domain Controller Unavailable
Cannot Log onto Domain Member Workstation After Joining Domain
6. Backup Domain Control
Features and Benefits
Essential Background Information
MS Windows NT4-style Domain Control
LDAP Configuration Notes
Active Directory Domain Control
What Qualifies a Domain Controller on the Network?
How does a Workstation find its Domain Controller?
Backup Domain Controller Configuration
Example Configuration
Common Errors
Machine Accounts Keep Expiring
Can Samba Be a Backup Domain Controller to an NT4 PDC?
How Do I Replicate the smbpasswd File?
Can I Do This All with LDAP?
7. Domain Membership
Features and Benefits
MS Windows Workstation/Server Machine Trust Accounts
Manual Creation of Machine Trust Accounts
Managing Domain Machine Accounts using NT4 Server Manager
On-the-Fly Creation of Machine Trust Accounts
Making an MS Windows Workstation or Server a Domain Member
Domain Member Server
Joining an NT4-type Domain with Samba-3
Why Is This Better Than security = server?
Samba ADS Domain Membership
Configure smb.conf
Configure /etc/krb5.conf
Create the Computer Account
Testing Server Setup
Testing with smbclient
Notes
Sharing User ID Mappings between Samba Domain Members
Common Errors
Cannot Add Machine Back to Domain
Adding Machine to Domain Fails
I Can't Join a Windows 2003 PDC
8. Stand-alone Servers
Features and Benefits
Background
Example Configuration
Reference Documentation Server
Central Print Serving
Common Errors
9. MS Windows Network Configuration Guide
Note
III. Advanced Configuration
10. Network Browsing
Features and Benefits
What Is Browsing?
Discussion
NetBIOS over TCP/IP
TCP/IP without NetBIOS
DNS and Active Directory
How Browsing Functions
Configuring WORKGROUP Browsing
DOMAIN Browsing Configuration
Forcing Samba to Be the Master
Making Samba the Domain Master
Note about Broadcast Addresses
Multiple Interfaces
Use of the Remote Announce Parameter
Use of the Remote Browse Sync Parameter
WINS The Windows Internetworking Name Server
WINS Server Configuration
WINS Replication
Static WINS Entries
Helpful Hints
Windows Networking Protocols
Name Resolution Order
Technical Overview of Browsing
Browsing Support in Samba
Problem Resolution
Cross-Subnet Browsing
Common Errors
How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
Server Resources Can Not Be Listed
I get an `Unable to browse the network' error
Browsing of Shares and Directories is Very Slow
11. Account Information Databases
Features and Benefits
Backward Compatibility Backends
New Backends
Technical Information
Important Notes About Security
Mapping User Identifiers between MS Windows and UNIX
Mapping Common UIDs/GIDs on Distributed Machines
Account Management Tools
The smbpasswd Command
The pdbedit Command
Password Backends
Plaintext
smbpasswd Encrypted Password Database
tdbsam
ldapsam
MySQL
XML
Common Errors
Users Cannot Logon
Users Being Added to the Wrong Backend Database
Configuration of auth methods
12. Group Mapping MS Windows and UNIX
Features and Benefits
Discussion
Default Users, Groups and Relative Identifiers
Example Configuration
Configuration Scripts
Sample smb.conf Add Group Script
Script to Configure Group Mapping
Common Errors
Adding Groups Fails
Adding MS Windows Groups to MS Windows Groups Fails
Adding Domain Users to the Power Users Group
13. File, Directory and Share Access Controls
Features and Benefits
File System Access Controls
MS Windows NTFS Comparison with UNIX File Systems
Managing Directories
File and Directory Access Control
Share Definition Access Controls
User and Group-Based Controls
File and Directory Permissions-Based Controls
Miscellaneous Controls
Access Controls on Shares
Share Permissions Management
MS Windows Access Control Lists and UNIX Interoperability
Managing UNIX Permissions Using NT Security Dialogs
Viewing File Security on a Samba Share
Viewing File Ownership
Viewing File or Directory Permissions
Modifying File or Directory Permissions
Interaction with the Standard Samba create mask Parameters
Interaction with the Standard Samba File Attribute Mapping
Common Errors
Users Cannot Write to a Public Share
File Operations Done as root with force user Set
MS Word with Samba Changes Owner of File
14. File and Record Locking
Features and Benefits
Discussion
Opportunistic Locking Overview
Samba Opportunistic Locking Control
Example Configuration
MS Windows Opportunistic Locking and Caching Controls
Workstation Service Entries
Server Service Entries
Persistent Data Corruption
Common Errors
locking.tdb Error Messages
Problems Saving Files in MS Office on Windows XP
Long Delays Deleting Files Over Network with XP SP1
Additional Reading
15. Securing Samba
Introduction
Features and Benefits
Technical Discussion of Protective Measures and Issues
Using Host-Based Protection
User-Based Protection
Using Interface Protection
Using a Firewall
Using IPC$ Share-Based Denials
NTLMv2 Security
Upgrading Samba
Common Errors
Smbclient Works on Localhost, but the Network Is Dead
Why Can Users Access Home Directories of Other Users?
16. Interdomain Trust Relationships
Features and Benefits
Trust Relationship Background
Native MS Windows NT4 Trusts Configuration
Creating an NT4 Domain Trust
Completing an NT4 Domain Trust
Inter-Domain Trust Facilities
Configuring Samba NT-Style Domain Trusts
Samba as the Trusted Domain
Samba as the Trusting Domain
NT4-Style Domain Trusts with Windows 2000
Common Errors
17. Hosting a Microsoft Distributed File System tree on Samba
Features and Benefits
Common Errors
MSDFS UNIX Path Is Case-Critical
18. Classical Printing Support
Features and Benefits
Technical Introduction
Client to Samba Print Job Processing
Printing Related Configuration Parameters
Simple Print Configuration
Verifing Configuration with testparm
Rapid Configuration Validation
Extended Printing Configuration
Detailed Explanation Settings
Printing Developments Since Samba-2.2
Point'n'Print Client Drivers on Samba Servers
The Obsoleted [printer$] Section
Creating the [print$] Share
[print$] Section Parameters
The [print$] Share Directory
Installing Drivers into [print$]
Add Printer Wizard Driver Installation
Installing Print Drivers Using rpcclient
Client Driver Installation Procedure
First Client Driver Installation
Setting Device Modes on New Printers
Additional Client Driver Installation
Always Make First Client Connection as root or printer admin
Other Gotchas
Setting Default Print Options for Client Drivers
Supporting Large Numbers of Printers
Adding New Printers with the Windows NT APW
Error Message: Cannot connect under a different Name
Take Care When Assembling Driver Files
Samba and Printer Ports
Avoiding Common Client Driver Misconfiguration
The Imprints Toolset
What is Imprints?
Creating Printer Driver Packages
The Imprints Server
The Installation Client
Adding Network Printers without User Interaction
The addprinter Command
Migration of Classical Printing to Samba
Publishing Printer Information in Active Directory or LDAP
Common Errors
I Give My Root Password but I Do Not Get Access
My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost
19. CUPS Printing Support
Introduction
Features and Benefits
Overview
Basic CUPS Support Configuration
Linking smbd with libcups.so
Simple smb.conf Settings for CUPS
More Complex CUPS smb.conf Settings
Advanced Configuration
Central Spooling vs. Peer-to-Peer Printing
Raw Print Serving Vendor Drivers on Windows Clients
Installation of Windows Client Drivers
Explicitly Enable raw Printing for application/octet-stream
Driver Upload Methods
Advanced Intelligent Printing with PostScript Driver Download
GDI on Windows -- PostScript on UNIX
Windows Drivers, GDI and EMF
UNIX Printfile Conversion and GUI Basics
PostScript and Ghostscript
Ghostscript the Software RIP for Non-PostScript Printers
PostScript Printer Description (PPD) Specification
Using Windows-Formatted Vendor PPDs
CUPS Also Uses PPDs for Non-PostScript Printers
The CUPS Filtering Architecture
MIME Types and CUPS Filters
MIME Type Conversion Rules
Filtering Overview
Prefilters
pstops
pstoraster
imagetops and imagetoraster
rasterto [printers specific]
CUPS Backends
The Role of cupsomatic/foomatic
The Complete Picture
mime.convs
Raw Printing
application/octet-stream Printing
PostScript Printer Descriptions (PPDs) for Non-PS Printers
cupsomatic/foomatic-rip Versus native CUPS Printing
Examples for Filtering Chains
Sources of CUPS Drivers/PPDs
Printing with Interface Scripts
Network Printing (Purely Windows)
From Windows Clients to an NT Print Server
Driver Execution on the Client
Driver Execution on the Server
Network Printing (Windows Clients UNIX/Samba Print Servers)
From Windows Clients to a CUPS/Samba Print Server
Samba Receiving Jobfiles and Passing Them to CUPS
Network PostScript RIP
PPDs for Non-PS Printers on UNIX
PPDs for Non-PS Printers on Windows
Windows Terminal Servers (WTS) as CUPS Clients
Printer Drivers Running in Kernel Mode Cause Many Problems
Workarounds Impose Heavy Limitations
CUPS: A Magical Stone?
PostScript Drivers with No Major Problems Even in Kernel Mode
Configuring CUPS for Driver Download
cupsaddsmb: The Unknown Utility
Prepare Your smb.conf for cupsaddsmb
CUPS PostScript Driver for Windows NT/200x/XP
Recognizing Different Driver Files
Acquiring the Adobe Driver Files
ESP Print Pro PostScript Driver for Windows NT/200x/XP
Caveats to be Considered
Windows CUPS PostScript Driver Versus Adobe Driver
Run cupsaddsmb (Quiet Mode)
Run cupsaddsmb with Verbose Output
Understanding cupsaddsmb
How to Recognize If cupsaddsmb Completed Successfully
cupsaddsmb with a Samba PDC
cupsaddsmb Flowchart
Installing the PostScript Driver on a Client
Avoiding Critical PostScript Driver Settings on the Client
Installing PostScript Driver Files Manually Using rpcclient
A Check of the rpcclient man Page
Understanding the rpcclient man Page
Producing an Example by Querying a Windows Box
Requirements for adddriver and setdriver to Succeed
Manual Driver Installation in 15 Steps
Troubleshooting Revisited
The Printing *.tdb Files
Trivial Database Files
Binary Format
Losing *.tdb Files
Using tdbbackup
CUPS Print Drivers from Linuxprinting.org
foomatic-rip and Foomatic Explained
foomatic-rip and Foomatic-PPD Download and Installation
Page Accounting with CUPS
Setting Up Quotas
Correct and Incorrect Accounting
Adobe and CUPS PostScript Drivers for Windows Clients
The page_log File Syntax
Possible Shortcomings
Future Developments
Additional Material
Auto-Deletion or Preservation of CUPS Spool Files
CUPS Configuration Settings Explained
Pre-Conditions
Manual Configuration
Printing from CUPS to Windows Attached Printers
More CUPS-Filtering Chains
Common Errors
Windows 9x/ME Client Can't Install Driver
cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
cupsaddsmb Errors
Client Can't Connect to Samba Printer
New Account Reconnection from Windows 200x/XP Troubles
Avoid Being Connected to the Samba Server as the Wrong User
Upgrading to CUPS Drivers from Adobe Drivers
Can't Use cupsaddsmb on Samba Server Which Is a PDC
Deleted Windows 200x Printer Driver Is Still Shown
Windows 200x/XP "Local Security Policies"
Administrator Cannot Install Printers for All Local Users
Print Change Notify Functions on NT-clients
WinXP-SP1
Print Options for All Users Can't Be Set on Windows 200x/XP
Most Common Blunders in Driver Settings on Windows Clients
cupsaddsmb Does Not Work with Newly Installed Printer
Permissions on /var/spool/samba/ Get Reset After Each Reboot
Print Queue Called lp Mis-handles Print Jobs
Location of Adobe PostScript Driver Files for cupsaddsmb
Overview of the CUPS Printing Processes
20. Stackable VFS modules
Features and Benefits
Discussion
Included Modules
audit
extd_audit
fake_perms
recycle
netatalk
VFS Modules Available Elsewhere
DatabaseFS
vscan
21. Winbind: Use of Domain Accounts
Features and Benefits
Introduction
What Winbind Provides
Target Uses
How Winbind Works
Microsoft Remote Procedure Calls
Microsoft Active Directory Services
Name Service Switch
Pluggable Authentication Modules
User and Group ID Allocation
Result Caching
Installation and Configuration
Introduction
Requirements
Testing Things Out
Conclusion
Common Errors
NSCD Problem Warning
Winbind Is Not Resolving Users and Groups
22. Advanced Network Management
Features and Benefits
Remote Server Administration
Remote Desktop Management
Remote Management from NoMachine.Com
Network Logon Script Magic
Adding Printers without User Intervention
23. System and Account Policies
Features and Benefits
Creating and Managing System Policies
Windows 9x/ME Policies
Windows NT4-Style Policy Files
MS Windows 200x/XP Professional Policies
Managing Account/User Policies
Management Tools
Samba Editreg Toolset
Windows NT4/200x
Samba PDC
System Startup and Logon Processing Overview
Common Errors
Policy Does Not Work
24. Desktop Profile Management
Features and Benefits
Roaming Profiles
Samba Configuration for Profile Handling
Windows Client Profile Configuration Information
Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
Profile Migration from Windows NT4/200x Server to Samba
Mandatory Profiles
Creating and Managing Group Profiles
Default Profile for Windows Users
MS Windows 9x/Me
MS Windows NT4 Workstation
MS Windows 200x/XP
Common Errors
Configuring Roaming Profiles for a Few Users or Groups
Cannot Use Roaming Profiles
Changing the Default Profile
25. PAM-Based Distributed Authentication
Features and Benefits
Technical Discussion
PAM Configuration Syntax
Example System Configurations
smb.conf PAM Configuration
Remote CIFS Authentication Using winbindd.so
Password Synchronization Using pam_smbpass.so
Common Errors
pam_winbind Problem
Winbind Is Not Resolving Users and Groups
26. Integrating MS Windows Networks with Samba
Features and Benefits
Background Information
Name Resolution in a Pure UNIX/Linux World
/etc/hosts
/etc/resolv.conf
/etc/host.conf
/etc/nsswitch.conf
Name Resolution as Used within MS Windows Networking
The NetBIOS Name Cache
The LMHOSTS File
HOSTS File
DNS Lookup
WINS Lookup
Common Errors
Pinging Works Only in One Way
Very Slow Network Connections
Samba Server Name Change Problem
27. Unicode/Charsets
Features and Benefits
What Are Charsets and Unicode?
Samba and Charsets
Conversion from Old Names
Japanese Charsets
Common Errors
CP850.so Can't Be Found
28. Samba Backup Techniques
Note
Features and Benefits
29. High Availability Options
Note
IV. Migration and Updating
30. Upgrading from Samba-2.x to Samba-3.0.0
Quick Migration Guide
New Features in Samba-3
Configuration Parameter Changes
Removed Parameters
New Parameters
Modified Parameters (Changes in Behavior):
New Functionality
Databases
Changes in Behavior
Charsets
Passdb Backends and Authentication
LDAP
31. Migration from NT4 PDC to Samba-3 PDC
Planning and Getting Started
Objectives
Steps in Migration Process
Migration Options
Planning for Success
Samba-3 Implementation Choices
32. SWAT The Samba Web Administration Tool
Features and Benefits
Guidelines and Technical Tips
Validate SWAT Installation
Enabling SWAT for Use
Securing SWAT through SSL
Enabling SWAT Internationalization Support
Overview and Quick Tour
The SWAT Home Page
Global Settings
Share Settings
Printers Settings
The SWAT Wizard
The Status Page
The View Page
The Password Change Page
V. Troubleshooting
33. The Samba Checklist
Introduction
Assumptions
The Tests
34. Analyzing and Solving Samba Problems
Diagnostics Tools
Debugging with Samba Itself
Tcpdump
Ethereal
The Windows Network Monitor
Useful URLs
Getting Mailing List Help
How to Get Off the Mailing Lists
35. Reporting Bugs
Introduction
General Information
Debug Levels
Internal Errors
Attaching to a Running Process
Patches
VI. Appendixes
36. How to Compile Samba
Access Samba Source Code via CVS
Introduction
CVS Access to samba.org
Accessing the Samba Sources via rsync and ftp
Verifying Samba's PGP Signature
Building the Binaries
Compiling Samba with Active Directory Support
Starting the smbd and nmbd
Starting from inetd.conf
Alternative: Starting smbd as a Daemon
37. Portability
HPUX
SCO UNIX
DNIX
Red Hat Linux
AIX
Sequential Read Ahead
Solaris
Locking Improvements
Winbind on Solaris 9
38. Samba and Other CIFS Clients
Macintosh Clients
OS2 Client
Configuring OS/2 Warp Connect or OS/2 Warp 4
Configuring Other Versions of OS/2
Printer Driver Download for OS/2 Clients
Windows for Workgroups
Latest TCP/IP Stack from Microsoft
Delete .pwl Files After Password Change
Configuring Windows for Workgroups Password Handling
Password Case Sensitivity
Use TCP/IP as Default Protocol
Speed Improvement
Windows 95/98
Speed Improvement
Windows 2000 Service Pack 2
Windows NT 3.1
39. Samba Performance Tuning
Comparisons
Socket Options
Read Size
Max Xmit
Log Level
Read Raw
Write Raw
Slow Logins
Client Tuning
Samba Performance Problem Due to Changing Linux Kernel
Corrupt tdb Files
40. DNS and DHCP Configuration Guide
Note
41. Further Resources
Websites
Related updates from Microsoft
Index

List of Figures

5.1. An Example Domain.
10.1. Cross-Subnet Browsing Example.
11.1. IDMAP: Resolution of SIDs to UIDs.
11.2. IDMAP: Resolution of UIDs to SIDs.
12.1. IDMAP: group SID to GID resolution.
12.2. IDMAP: GID resolution to matching SID.
12.3. IDMAP storing group mappings.
13.1. Overview of UNIX permissions field.
16.1. Trusts overview.
19.1. Windows printing to a local printer.
19.2. Printing to a PostScript printer.
19.3. Ghostscript as a RIP for non-postscript printers.
19.4. Pre-filtering in CUPS to form PostScript.
19.5. Adding device-specific print options.
19.6. PostScript to intermediate raster format.
19.7. CUPS-raster production using Ghostscript.
19.8. Image format to CUPS-raster format conversion.
19.9. Raster to printer-specific formats.
19.10. cupsomatic/foomatic Processing versus Native CUPS.
19.11. PDF to socket chain.
19.12. PDF to USB chain.
19.13. Print driver execution on the client.
19.14. Print driver execution on the server.
19.15. Printing via CUPS/Samba server.
19.16. cupsaddsmb flowchart.
19.17. Filtering chain 1.
19.18. Filtering chain with cupsomatic
19.19. CUPS printing overview.
34.1. Starting a capture.
34.2. Main ethereal data window.

List of Tables

6.1. Domain Backend Account Distribution Options
7.1. Assumptions
10.1. Browse Subnet Example 1
10.2. Browse Subnet Example 2
10.3. Browse Subnet Example 3
10.4. Browse Subnet Example 4
11.1. Attributes in the sambaSamAccount objectclass (LDAP) Part A
11.2. Attributes in the sambaSamAccount objectclass (LDAP) Part B
11.3. Possible ldap passwd sync values
11.4. Basic smb.conf options for MySQL passdb backend
11.5. MySQL field names for MySQL passdb backend
12.1. Well-Known User Default RIDs
13.1. Managing Directories with UNIX and Windows
13.2. User and Group Based Controls
13.3. File and Directory Permission Based Controls
13.4. Other Controls
18.1. Default Printing Settings
19.1. PPDs shipped with CUPS
20.1. Extended Auditing Log Information
24.1. User Shell Folder Registry Keys Default Values
24.2. Defaults of Profile Settings Registry Keys
24.3. Defaults of Default User Profile Paths Registry Keys
25.1. Options recognized by pam_smbpass
26.1. Unique NetBIOS Names
26.2. Group Names
30.1. TDB File Descriptions
31.1. The Three Major Site Types
31.2. Nature of the Conversion Choices

List of Examples

2.1. A minimal smb.conf
2.2. Another simple smb.conf File
5.1. smb.conf for being a PDC
5.2. smb.conf for being a PDC
6.1. Minimal smb.conf for a PDC in Use With a BDC LDAP Server on PDC.
6.2. Multiple LDAP Servers in smb.conf
6.3. Minimal setup for being a BDC
8.1. smb.conf for Reference Documentation Server
8.2. smb.conf for Anonymous Printing
10.1. Domain Master Browser smb.conf
10.2. Local master browser smb.conf
10.3. smb.conf for not being a Master Browser
10.4. Local Master Browser smb.conf
10.5. smb.conf for not being a master browser
11.1. Example configuration with the LDAP idmap backend
11.2. Configuration with LDAP
11.3. Example configuration for the MySQL passdb backend
12.1. smbgrpadd.sh
12.2. Configuration of smb.conf for the add group script.
12.3. Script to Set Group Mapping
13.1. Example File
14.1. Share with some files oplocked
14.2. Configuration with oplock break contention limit
17.1. smb.conf with DFS configured
18.1. Simple configuration with BSD printing
18.2. Extended BSD Printing Configuration
18.3. [print\$] example
19.1. Simplest printing-related smb.conf
19.2. Overriding global CUPS settings for one printer
19.3. smb.conf for cupsaddsmb usage
20.1. smb.conf with VFS modules
20.2. smb.conf with multiple VFS modules
21.1. smb.conf for Winbind set-up
33.1. smb.conf with [tmp] share
33.2. Configuration for only allowing connections from a certain subnet
33.3. Configuration for allowing connections from a certain subnet and localhost
38.1. Minimal profile share

Legal Notice

This documentation is distributed under the GNU General Public License (GPL) version 2. A copy of the license is included with the Samba source distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt

Attributions

  • David Lechnyr <david@lechnyr.com>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Karl Auer <kauer@biplane.com.au>

  • Dan Shearer <dan@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • David Bannon <dbannon@samba.org>

  • Guenther Deschner <gd@suse.de> (LDAP updates)

  • John H. Terpstra <jht@samba.org>

  • Volker Lendecke <Volker.Lendecke@SerNet.DE>

  • Guenther Deschner <gd@suse.de> (LDAP updates)

  • John H. Terpstra <jht@samba.org>

  • Jeremy Allison <jra@samba.org>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • Guenther Deschner <gd@suse.de> (LDAP updates)

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • Jeremy Allison <jra@samba.org>

  • Guenther Deschner <gd@suse.de> (LDAP updates)

  • Olivier (lem) Lemaire <olem@IDEALX.org>

  • John H. Terpstra <jht@samba.org>

  • Jean François Micouleau

  • Gerald (Jerry) Carter <jerry@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jeremy Allison <jra@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

  • Jeremy Allison <jra@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Eric Roseme <eric.roseme@hp.com>

  • Andrew Tridgell <tridge@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Rafal Szczesniak <mimir@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

  • Stephen Langasek <vorlon@netexpress.net>

  • Shirish Kalele <samba@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Kurt Pfeifle <kpfeifle@danka.de>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Kurt Pfeifle <kpfeifle@danka.de>

  • Ciprian Vizitiu <CVizitiu@gbif.org> (drawings)

  • Jelmer R. Vernooij <jelmer@samba.org> (drawings)

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Tim Potter <tpot@samba.org>

  • Simo Sorce (original vfs_skel README)

  • Alexander Bokovoy (original vfs_netatalk docs)

  • Stefan Metzmacher (Update for multiple modules)

  • Tim Potter <tpot@linuxcare.com.au>

  • Andrew Tridgell <tridge@samba.org>

  • Naag Mummaneni <getnag@rediffmail.com> (Notes for Solaris)

  • John Trostel <jtrostel@snapserver.com>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Stephen Langasek <vorlon@netexpress.net>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • TAKAHASHI Motonobu <monyo@home.monyo.com>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • Dan Shearer <dan@samba.org>

  • Gerald (Jerry) Carter <jerry@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • David Bannon <dbannon@samba.org>

  • Dan Shearer <dan@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Andrew Tridgell <tridge@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Dan Shearer <dan@samba.org>

  • Jim McDonough <jmcd@us.ibm.com> (OS/2)

  • Paul Cochrane <paulc@dth.scot.nhs.uk>

  • Jelmer R. Vernooij <jelmer@samba.org>

  • John H. Terpstra <jht@samba.org>

  • John H. Terpstra <jht@samba.org>

  • Jelmer R. Vernooij <jelmer@samba.org>

General Installation

Chapter 1. Introduction to Samba

David Lechnyr

Unofficial HOWTO

April 14, 2003

"If you understand what you're doing, you're not learning anything." -- Anonymous

Samba is a file and print server for Windows-based clients using TCP/IP as the underlying transport protocol. In fact, it can support any SMB/CIFS-enabled client. One of Samba's big strengths is that you can use it to blend your mix of Windows and Linux machines together without requiring a separate Windows NT/2000/2003 Server. Samba is actively being developed by a global team of about 30 active programmers and was originally developed by Andrew Tridgell.

Background

Once long ago, there was a buzzword referred to as DCE/RPC. This stood for Distributed Computing Environment/Remote Procedure Calls and conceptually was a good idea. It was originally developed by Apollo/HP as NCA 1.0 (Network Computing Architecture) and only ran over UDP. When there was a need to run it over TCP so that it would be compatible with DECnet 3.0, it was redesigned, submitted to The Open Group, and officially became known as DCE/RPC. Microsoft came along and decided, rather than pay $20 per seat to license this technology, to reimplement DCE/RPC themselves as MSRPC. From this, the concept continued in the form of SMB (Server Message Block, or the "what") using the NetBIOS (Network Basic Input/Output System, or the "how") compatibility layer. You can run SMB (i.e., transport) over several different protocols; many different implementations arose as a result, including NBIPX (NetBIOS over IPX, NwLnkNb, or NWNBLink) and NBT (NetBIOS over TCP/IP, or NetBT). As the years passed, NBT became the most common form of implementation until the advance of "Direct-Hosted TCP" -- the Microsoft marketing term for eliminating NetBIOS entirely and running SMB by itself across TCP port 445 only. As of yet, direct-hosted TCP has yet to catch on.

Perhaps the best summary of the origins of SMB are voiced in the 1997 article titled, CIFS: Common Insecurities Fail Scrutiny:

Several megabytes of NT-security archives, random whitepapers, RFCs, the CIFS spec, the Samba stuff, a few MS knowledge-base articles, strings extracted from binaries, and packet dumps have been dutifully waded through during the information-gathering stages of this project, and there are *still* many missing pieces... While often tedious, at least the way has been generously littered with occurrences of clapping hand to forehead and muttering 'crikey, what are they thinking?

Terminology

  • SMB: Acronym for "Server Message Block". This is Microsoft's file and printer sharing protocol.

  • CIFS: Acronym for "Common Internet File System". Around 1996, Microsoft apparently decided that SMB needed the word "Internet" in it, so they changed it to CIFS.

  • Direct-Hosted: A method of providing file/printer sharing services over port 445/tcp only using DNS for name resolution instead of WINS.

  • IPC: Acronym for "Inter-Process Communication". A method to communicate specific information between programs.

  • Marshalling: - A method of serializing (i.e., sequential ordering of) variable data suitable for transmission via a network connection or storing in a file. The source data can be re-created using a similar process called unmarshalling.

  • NetBIOS: Acronym for "Network Basic Input/Output System". This is not a protocol; it is a method of communication across an existing protocol. This is a standard which was originally developed for IBM by Sytek in 1983. To exaggerate the analogy a bit, it can help to think of this in comparison your computer's BIOS -- it controls the essential functions of your input/output hardware -- whereas NetBIOS controls the essential functions of your input/output traffic via the network. Again, this is a bit of an exaggeration but it should help that paradigm shift. What is important to realize is that NetBIOS is a transport standard, not a protocol. Unfortunately, even technically brilliant people tend to interchange NetBIOS with terms like NetBEUI without a second thought; this will cause no end (and no doubt) of confusion.

  • NetBEUI: Acronym for the "NetBIOS Extended User Interface". Unlike NetBIOS, NetBEUI is a protocol, not a standard. It is also not routable, so traffic on one side of a router will be unable to communicate with the other side. Understanding NetBEUI is not essential to deciphering SMB; however it helps to point out that it is not the same as NetBIOS and to improve your score in trivia at parties. NetBEUI was originally referred to by Microsoft as "NBF", or "The Windows NT NetBEUI Frame protocol driver". It is not often heard from these days.

  • NBT: Acronym for "NetBIOS over TCP"; also known as "NetBT". Allows the continued use of NetBIOS traffic proxied over TCP/IP. As a result, NetBIOS names are made to IP addresses and NetBIOS name types are conceptually equivalent to TCP/IP ports. This is how file and printer sharing are accomplished in Windows 95/98/ME. They traditionally rely on three ports: NetBIOS Name Service (nbname) via UDP port 137, NetBIOS Datagram Service (nbdatagram) via UDP port 138, and NetBIOS Session Service (nbsession) via TCP port 139. All name resolution is done via WINS, NetBIOS broadcasts, and DNS. NetBIOS over TCP is documented in RFC 1001 (Concepts and methods) and RFC 1002 (Detailed specifications).

  • W2K: Acronym for Windows 2000 Professional or Server

  • W3K: Acronym for Windows 2003 Server

If you plan on getting help, make sure to subscribe to the Samba Mailing List (available at http://www.samba.org).

Related Projects

There are currently two network filesystem client projects for Linux that are directly related to Samba: SMBFS and CIFS VFS. These are both available in the Linux kernel itself.

  • SMBFS (Server Message Block File System) allows you to mount SMB shares (the protocol that Microsoft Windows and OS/2 Lan Manager use to share files and printers over local networks) and access them just like any other Unix directory. This is useful if you just want to mount such filesystems without being a SMBFS server.

  • CIFS VFS (Common Internet File System Virtual File System) is the successor to SMBFS, and is being actively developed for the upcoming version of the Linux kernel. The intent of this module is to provide advanced network file system functionality including support for dfs (hierarchical name space), secure per-user session establishment, safe distributed caching (oplock), optional packet signing, Unicode and other internationalization improvements, and optional Winbind (nsswitch) integration.

Again, it's important to note that these are implementations for client filesystems, and have nothing to do with acting as a file and print server for SMB/CIFS clients.

There are other Open Source CIFS client implementations, such as the jCIFS project which provides an SMB client toolkit written in Java.

SMB Methodology

Traditionally, SMB uses UDP port 137 (NetBIOS name service, or netbios-ns), UDP port 138 (NetBIOS datagram service, or netbios-dgm), and TCP port 139 (NetBIOS session service, or netbios-ssn). Anyone looking at their network with a good packet sniffer will be amazed at the amount of traffic generated by just opening up a single file. In general, SMB sessions are established in the following order:

  • "TCP Connection" - establish 3-way handshake (connection) to port 139/tcp or 445/tcp.

  • "NetBIOS Session Request" - using the following "Calling Names": The local machine's NetBIOS name plus the 16th character 0x00; The server's NetBIOS name plus the 16th character 0x20

  • "SMB Negotiate Protocol" - determine the protocol dialect to use, which will be one of the following: PC Network Program 1.0 (Core) - share level security mode only; Microsoft Networks 1.03 (Core Plus) - share level security mode only; Lanman1.0 (LAN Manager 1.0) - uses Challenge/Response Authentication; Lanman2.1 (LAN Manager 2.1) - uses Challenge/Response Authentication; NT LM 0.12 (NT LM 0.12) - uses Challenge/Response Authentication

  • SMB Session Startup. Passwords are encrypted (or not) according to one of the following methods: Null (no encryption); Cleartext (no encryption); LM and NTLM; NTLM; NTLMv2

  • SMB Tree Connect: Connect to a share name (e.g., \\servername\share); Connect to a service type (e.g., IPC$ named pipe)

A good way to examine this process in depth is to try out SecurityFriday's SWB program. It allows you to walk through the establishment of a SMB/CIFS session step by step.

Epilogue

What's fundamentally wrong is that nobody ever had any taste when they did it. Microsoft has been very much into making the user interface look good, but internally it's just a complete mess. And even people who program for Microsoft and who have had years of experience, just don't know how it works internally. Worse, nobody dares change it. Nobody dares to fix bugs because it's such a mess that fixing one bug might just break a hundred programs that depend on that bug. And Microsoft isn't interested in anyone fixing bugs -- they're interested in making money. They don't have anybody who takes pride in Windows 95 as an operating system.

People inside Microsoft know it's a bad operating system and they still continue obviously working on it because they want to get the next version out because they want to have all these new features to sell more copies of the system.

The problem with that is that over time, when you have this kind of approach, and because nobody understands it, because nobody REALLY fixes bugs (other than when they're really obvious), the end result is really messy. You can't trust it because under certain circumstances it just spontaneously reboots or just halts in the middle of something that shouldn't be strange. Normally it works fine and then once in a blue moon for some completely unknown reason, it's dead, and nobody knows why. Not Microsoft, not the experienced user and certainly not the completely clueless user who probably sits there shivering thinking "What did I do wrong?" when they didn't do anything wrong at all.

That's what's really irritating to me."

-- Linus Torvalds, from an interview with BOOT Magazine, Sept 1998

Miscellaneous

This chapter is Copyright 2003 David Lechnyr (david at lechnyr dot com). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation. A copy of the license is available at http://www.gnu.org/licenses/fdl.txt.

Chapter 2. How to Install and Test SAMBA

Andrew Tridgell

Samba Team

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Karl Auer

Dan Shearer

Samba Team

Obtaining and Installing Samba

Binary packages of Samba are included in almost any Linux or UNIX distribution. There are also some packages available at the Samba homepage. Refer to the manual of your operating system for details on installing packages for your specific operating system.

If you need to compile Samba from source, check .

Configuring Samba (smb.conf)

Samba's configuration is stored in the smb.conf file, which usually resides in /etc/samba/smb.conf or /usr/local/samba/lib/smb.conf. You can either edit this file yourself or do it using one of the many graphical tools that are available, such as the Web-based interface SWAT, that is included with Samba.

Configuration file syntax

The smb.conf file uses the same syntax as the various old .ini files in Windows 3.1: Each file consists of various sections, which are started by putting the section name between brackets ([]) on a new line. Each contains zero or more key/value-pairs seperated by an equality sign (=). The file is just a plain-text file, so you can open and edit it with your favorite editing tool.

Each section in the smb.conf file represents a share on the Samba server. The section “global” is special, since it contains settings that apply to the whole Samba server and not to one share in particular.

contains a very minimal smb.conf.

Example 2.1. A minimal smb.conf

[global]
workgroup = WKG
netbios name = MYNAME
[share1]
path = /tmp
[share2]
path = /my_shared_folder
comment = Some random files

Example Configuration

There are sample configuration files in the examples subdirectory in the distribution. It is suggested you read them carefully so you can see how the options go together in practice. See the man page for all the options. It might be worthwhile to start out with the smb.conf.default configuration file and adapt it to your needs. It contains plenty of comments.

The simplest useful configuration file would contain something like shown in .

Example 2.2. Another simple smb.conf File

[global]
workgroup = MIDEARTH
[homes]
guest ok = no
read only = no

This will allow connections by anyone with an account on the server, using either their login name or homes as the service name. (Note: The workgroup that Samba should appear in must also be set. The default workgroup name is WORKGROUP.)

Make sure you put the smb.conf file in the correct place.

For more information about security settings for the [homes] share please refer to .

Test Your Config File with testparm

It's important to validate the contents of the smb.conf file using the testparm program. If testparm runs correctly, it will list the loaded services. If not, it will give an error message. Make sure it runs correctly and that the services look reasonable before proceeding. Enter the command:

	root#  testparm /etc/samba/smb.conf
	

Testparm will parse your configuration file and report any unknown parameters or incorrect syntax.

Always run testparm again whenever the smb.conf file is changed!

SWAT

SWAT is a Web-based interface that can be used to facilitate the configuration of Samba. SWAT might not be available in the Samba package that shipped with your platform, but in a separate package. Please read the SWAT manpage on compiling, installing and configuring SWAT from source.

To launch SWAT, just run your favorite Web browser and point it to http://localhost:901/. Replace localhost with the name of the computer on which Samba is running if that is a different computer than your browser.

SWAT can be used from a browser on any IP-connected machine, but be aware that connecting from a remote machine leaves your connection open to password sniffing as passwords will be sent over the wire in the clear.

More information about SWAT can be found in .

List Shares Available on the Server

To list shares that are available from the configured Samba server execute the following command:

$ smbclient -L yourhostname

You should see a list of shares available on your server. If you do not, then something is incorrectly configured. This method can also be used to see what shares are available on other SMB servers, such as Windows 2000.

If you choose user-level security you may find that Samba requests a password before it will list the shares. See the smbclient man page for details. You can force it to list the shares without a password by adding the option -N to the command line.

Connect with a UNIX Client

Enter the following command:

$ smbclient  //yourhostname/aservice

Typically yourhostname is the name of the host on which smbd has been installed. The aservice is any service that has been defined in the smb.conf file. Try your user name if you just have a [homes] section in the smb.conf file.

Example: If the UNIX host is called bambi and a valid login name is fred, you would type:

$ smbclient //bambi/fred

Connect from a Remote SMB Client

Now that Samba is working correctly locally, you can try to access it from other clients. Within a few minutes, the Samba host should be listed in the Network Neighborhood on all Windows clients of its subnet. Try browsing the server from another client or 'mounting' it.

Mounting disks from a DOS, Windows or OS/2 client can be done by running a command such as:

C:\> net use d: \\servername\service

Try printing, e.g.

C:\> net use lpt1:	\\servername\spoolservice

C:\> print filename

What If Things Don't Work?

You might want to read . If you are still stuck, refer to . Samba has been successfully installed at thousands of sites worldwide. It is unlikely that your particular problem is unique, so it might be productive to perform an Internet search to see if someone else has encountered your problem and has found a way to overcome it.

Common Errors

The following questions and issues are raised repeatedly on the Samba mailing list.

Large Number of smbd Processes

Samba consists of three core programs: nmbd, smbd, and winbindd. nmbd is the name server message daemon, smbd is the server message daemon, and winbindd is the daemon that handles communication with Domain Controllers.

If Samba is not running as a WINS server, then there will be one single instance of nmbd running on your system. If it is running as a WINS server then there will be two instances one to handle the WINS requests.

smbd handles all connection requests. It spawns a new process for each client connection made. That is why you may see so many of them, one per client connection.

winbindd will run as one or two daemons, depending on whether or not it is being run in split mode (in which case there will be two instances).

Error Message: open_oplock_ipc

An error message is observed in the log files when smbd is started: “open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested.

Your loopback device isn't working correctly. Make sure it is configured correctly. The loopback device is an internal (virtual) network device with the IP address 127.0.0.1. Read your OS documentation for details on how to configure the loopback on your system.

The network name cannot be found

This error can be caused by one of these misconfigurations:

  • You specified an nonexisting path for the share in smb.conf.

  • The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible.

  • The share you are trying to access does not exist.

Chapter 3. Fast Start for the Impatient

John H. Terpstra

Samba Team

Table of Contents

Note

Note

This chapter did not make it into this release. It is planned for the published release of this document.

Server Configuration Basics

First Steps in Server Configuration

Samba can operate in various modes within SMB networks. This HOWTO section contains information on configuring samba to function as the type of server your network requires. Please read this section carefully.

Table of Contents

4. Server Types and Security Modes
Features and Benefits
Server Types
Samba Security Modes
User Level Security
Share Level Security
Domain Security Mode (User Level Security)
ADS Security Mode (User Level Security)
Server Security (User Level Security)
Password Checking
Common Errors
What Makes Samba a Server?
What Makes Samba a Domain Controller?
What Makes Samba a Domain Member?
Constantly Losing Connections to Password Server
5. Domain Control
Features and Benefits
Basics of Domain Control
Domain Controller Types
Preparing for Domain Control
Domain Control Example Configuration
Samba ADS Domain Control
Domain and Network Logon Configuration
Domain Network Logon Service
Security Mode and Master Browsers
Common Errors
$ Cannot Be Included in Machine Name
Joining Domain Fails Because of Existing Machine Account
The System Cannot Log You On (C000019B)
The Machine Trust Account Is Not Accessible
Account Disabled
Domain Controller Unavailable
Cannot Log onto Domain Member Workstation After Joining Domain
6. Backup Domain Control
Features and Benefits
Essential Background Information
MS Windows NT4-style Domain Control
LDAP Configuration Notes
Active Directory Domain Control
What Qualifies a Domain Controller on the Network?
How does a Workstation find its Domain Controller?
Backup Domain Controller Configuration
Example Configuration
Common Errors
Machine Accounts Keep Expiring
Can Samba Be a Backup Domain Controller to an NT4 PDC?
How Do I Replicate the smbpasswd File?
Can I Do This All with LDAP?
7. Domain Membership
Features and Benefits
MS Windows Workstation/Server Machine Trust Accounts
Manual Creation of Machine Trust Accounts
Managing Domain Machine Accounts using NT4 Server Manager
On-the-Fly Creation of Machine Trust Accounts
Making an MS Windows Workstation or Server a Domain Member
Domain Member Server
Joining an NT4-type Domain with Samba-3
Why Is This Better Than security = server?
Samba ADS Domain Membership
Configure smb.conf
Configure /etc/krb5.conf
Create the Computer Account
Testing Server Setup
Testing with smbclient
Notes
Sharing User ID Mappings between Samba Domain Members
Common Errors
Cannot Add Machine Back to Domain
Adding Machine to Domain Fails
I Can't Join a Windows 2003 PDC
8. Stand-alone Servers
Features and Benefits
Background
Example Configuration
Reference Documentation Server
Central Print Serving
Common Errors
9. MS Windows Network Configuration Guide
Note

Chapter 4. Server Types and Security Modes

Andrew Tridgell

Samba Team

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

This chapter provides information regarding the types of server that Samba may be configured to be. A Microsoft network administrator who wishes to migrate to or use Samba will want to know the meaning, within a Samba context, of terms familiar to MS Windows administrator. This means that it is essential also to define how critical security modes function before we get into the details of how to configure the server itself.

The chapter provides an overview of the security modes of which Samba is capable and how they relate to MS Windows servers and clients.

A question often asked is, “Why would I want to use Samba?” Most chapters contain a section that highlights features and benefits. We hope that the information provided will help to answer this question. Be warned though, we want to be fair and reasonable, so not all features are positive towards Samba. The benefit may be on the side of our competition.

Features and Benefits

Two men were walking down a dusty road, when one suddenly kicked up a small red stone. It hurt his toe and lodged in his sandal. He took the stone out and cursed it with a passion and fury befitting his anguish. The other looked at the stone and said, “This is a garnet. I can turn that into a precious gem and some day it will make a princess very happy!

The moral of this tale: Two men, two very different perspectives regarding the same stone. Like it or not, Samba is like that stone. Treat it the right way and it can bring great pleasure, but if you are forced to use it and have no time for its secrets, then it can be a source of discomfort.

Samba started out as a project that sought to provide interoperability for MS Windows 3.x clients with a UNIX server. It has grown up a lot since its humble beginnings and now provides features and functionality fit for large scale deployment. It also has some warts. In sections like this one we tell of both.

So, what are the benefits of features mentioned in this chapter?

  • Samba-3 can replace an MS Windows NT4 Domain Controller.

  • Samba-3 offers excellent interoperability with MS Windows NT4-style domains as well as natively with Microsoft Active Directory domains.

  • Samba-3 permits full NT4-style Interdomain Trusts.

  • Samba has security modes that permit more flexible authentication than is possible with MS Windows NT4 Domain Controllers.

  • Samba-3 permits use of multiple account database backends.

  • The account (password) database backends can be distributed and replicated using multiple methods. This gives Samba-3 greater flexibility than MS Windows NT4 and in many cases a significantly higher utility than Active Directory domains with MS Windows 200x.

Server Types

Administrators of Microsoft networks often refer to three different type of servers:

  • Domain Controller

    • Primary Domain Controller
    • Backup Domain Controller
    • ADS Domain Controller
  • Domain Member Server

    • Active Directory Domain Server
    • NT4 Style Domain Domain Server
  • Stand-alone Server

The chapters covering Domain Control, Backup Domain Control and Domain Membership provide pertinent information regarding Samba configuration for each of these server roles. The reader is strongly encouraged to become intimately familiar with the information presented.

Samba Security Modes

In this section the function and purpose of Samba's security modes are described. An accurate understanding of how Samba implements each security mode as well as how to configure MS Windows clients for each mode will significantly reduce user complaints and administrator heartache.

In the SMB/CIFS networking world, there are only two types of security: User Level and Share Level. We refer to these collectively as security levels. In implementing these two security levels, Samba provides flexibilities that are not available with Microsoft Windows NT4/200x servers. In actual fact, Samba implements Share Level security only one way, but has four ways of implementing User Level security. Collectively, we call the Samba implementations Security Modes. They are known as: SHARE, USER, DOMAIN, ADS, and SERVER modes. They are documented in this chapter.

An SMB server tells the client at startup what security level it is running. There are two options: Share Level and User Level. Which of these two the client receives affects the way the client then tries to authenticate itself. It does not directly affect (to any great extent) the way the Samba server does security. This may sound strange, but it fits in with the client/server approach of SMB. In SMB everything is initiated and controlled by the client, and the server can only tell the client what is available and whether an action is allowed.

User Level Security

We will describe User Level Security first, as its simpler. In User Level Security, the client will send a session setup request directly following protocol negotiation. This request provides a username and password. The server can either accept or reject that username/password combination. At this stage the server has no idea what share the client will eventually try to connect to, so it can't base the accept/reject on anything other than:

  1. the username/password.

  2. the name of the client machine.

If the server accepts the username/password then the client expects to be able to mount shares (using a tree connection) without specifying a password. It expects that all access rights will be as the username/password specified in the session setup.

It is also possible for a client to send multiple session setup requests. When the server responds, it gives the client a uid to use as an authentication tag for that username/password. The client can maintain multiple authentication contexts in this way (WinDD is an example of an application that does this).

Example Configuration

The smb.conf parameter that sets user level security is:

security = user

This is the default setting since Samba-2.2.x.

Share Level Security

In Share Level security, the client authenticates itself separately for each share. It sends a password along with each tree connection (share mount). It does not explicitly send a username with this operation. The client expects a password to be associated with each share, independent of the user. This means that Samba has to work out what username the client probably wants to use. It is never explicitly sent the username. Some commercial SMB servers such as NT actually associate passwords directly with shares in Share Level security, but Samba always uses the UNIX authentication scheme where it is a username/password pair that is authenticated, not a share/password pair.

To understand the MS Windows networking parallels, one should think in terms of MS Windows 9x/Me where one can create a shared folder that provides read-only or full access, with or without a password.

Many clients send a session setup even if the server is in Share Level security. They normally send a valid username but no password. Samba records this username in a list of possible usernames. When the client then does a tree connection it also adds to this list the name of the share they try to connect to (useful for home directories) and any users listed in the user parameter in the smb.conf file. The password is then checked in turn against these possible usernames. If a match is found then the client is authenticated as that user.

Example Configuration

The smb.conf parameter that sets Share Level security is:

security = share

There are reports that recent MS Windows clients do not like to work with share mode security servers. You are strongly discouraged from using Share Level security.

Domain Security Mode (User Level Security)

When Samba is operating in security = domain mode, the Samba server has a domain security trust account (a machine account) and causes all authentication requests to be passed through to the Domain Controllers. In other words, this configuration makes the Samba server a Domain Member server.

Example Configuration

Samba as a Domain Member Server

This method involves addition of the following parameters in the smb.conf file:

security = domain
workgroup = MIDEARTH

In order for this method to work, the Samba server needs to join the MS Windows NT security domain. This is done as follows:

  1. On the MS Windows NT Domain Controller, using the Server Manager, add a machine account for the Samba server.

  2. On the UNIX/Linux system execute:

    root# net rpc join -U administrator%password

Note

Samba-2.2.4 and later can auto-join a Windows NT4-style Domain just by executing:

root# smbpasswd -j DOMAIN_NAME -r PDC_NAME \
	 -U Administrator%password

Samba-3 can do the same by executing:

root# net rpc join -U Administrator%password

It is not necessary with Samba-3 to specify the DOMAIN_NAME or the PDC_NAME as it figures this out from the smb.conf file settings.

Use of this mode of authentication does require there to be a standard UNIX account for each user in order to assign a UID once the account has been authenticated by the remote Windows DC. This account can be blocked to prevent logons by clients other than MS Windows through means such as setting an invalid shell in the /etc/passwd entry.

An alternative to assigning UIDs to Windows users on a Samba member server is presented in .

For more information regarding Domain Membership, see .

ADS Security Mode (User Level Security)

Both Samba-2.2, and Samba-3 can join an Active Directory domain. This is possible if the domain is run in native mode. Active Directory in native mode perfectly allows NT4-style Domain Members. This is contrary to popular belief. Active Directory in native mode prohibits only the use of Backup Domain Controllers running MS Windows NT4.

If you are using Active Directory, starting with Samba-3 you can join as a native AD member. Why would you want to do that? Your security policy might prohibit the use of NT-compatible authentication protocols. All your machines are running Windows 2000 and above and all use Kerberos. In this case Samba as an NT4-style domain would still require NT-compatible authentication data. Samba in AD-member mode can accept Kerberos tickets.

Example Configuration

realm = your.kerberos.REALM
security = ADS

The following parameter may be required:

password server = your.kerberos.server

Please refer to and for more information regarding this configuration option.

Server Security (User Level Security)

Server Security Mode is left over from the time when Samba was not capable of acting as a Domain Member server. It is highly recommended not to use this feature. Server security mode has many drawbacks that include:

  • Potential Account Lockout on MS Windows NT4/200x password servers.

  • Lack of assurance that the password server is the one specified.

  • Does not work with Winbind, which is particularly needed when storing profiles remotely.

  • This mode may open connections to the password server, and keep them open for extended periods.

  • Security on the Samba server breaks badly when the remote password server suddenly shuts down.

  • With this mode there is NO security account in the domain that the password server belongs to for the Samba server.

In Server Security Mode the Samba server reports to the client that it is in User Level security. The client then does a session setup as described earlier. The Samba server takes the username/password that the client sends and attempts to login to the password server by sending exactly the same username/password that it got from the client. If that server is in User Level Security and accepts the password, then Samba accepts the client's connection. This allows the Samba server to use another SMB server as the password server.

You should also note that at the start of all this where the server tells the client what security level it is in, it also tells the client if it supports encryption. If it does, it supplies the client with a random cryptkey. The client will then send all passwords in encrypted form. Samba supports this type of encryption by default.

The parameter security = server means that Samba reports to clients that it is running in user mode but actually passes off all authentication requests to another user mode server. This requires an additional parameter password server that points to the real authentication server. The real authentication server can be another Samba server, or it can be a Windows NT server, the latter being natively capable of encrypted password support.

Note

When Samba is running in Server Security Mode it is essential that the parameter password server is set to the precise NetBIOS machine name of the target authentication server. Samba cannot determine this from NetBIOS name lookups because the choice of the target authentication server is arbitrary and cannot be determined from a domain name. In essence, a Samba server that is in Server Security Mode is operating in what used to be known as workgroup mode.

Example Configuration

Using MS Windows NT as an Authentication Server

This method involves the additions of the following parameters in the smb.conf file:

encrypt passwords = Yes
security = server
password server = "NetBIOS_name_of_a_DC"

There are two ways of identifying whether or not a username and password pair is valid. One uses the reply information provided as part of the authentication messaging process, the other uses just an error code.

The downside of this mode of configuration is the fact that for security reasons Samba will send the password server a bogus username and a bogus password and if the remote server fails to reject the username and password pair then an alternative mode of identification of validation is used. Where a site uses password lock out after a certain number of failed authentication attempts this will result in user lockouts.

Use of this mode of authentication requires a standard UNIX account for the user. This account can be blocked to prevent logons by non-SMB/CIFS clients.

Password Checking

MS Windows clients may use encrypted passwords as part of a challenge/response authentication model (a.k.a. NTLMv1 and NTLMv2) or alone, or cleartext strings for simple password-based authentication. It should be realized that with the SMB protocol, the password is passed over the network either in plain-text or encrypted, but not both in the same authentication request.

When encrypted passwords are used, a password that has been entered by the user is encrypted in two ways:

  • An MD4 hash of the unicode of the password string. This is known as the NT hash.

  • The password is converted to upper case, and then padded or truncated to 14 bytes. This string is then appended with 5 bytes of NULL characters and split to form two 56-bit DES keys to encrypt a “magic” 8-byte value. The resulting 16 bytes form the LanMan hash.

MS Windows 95 pre-service pack 1, MS Windows NT versions 3.x and version 4.0 pre-service pack 3 will use either mode of password authentication. All versions of MS Windows that follow these versions no longer support plain text passwords by default.

MS Windows clients have a habit of dropping network mappings that have been idle for 10 minutes or longer. When the user attempts to use the mapped drive connection that has been dropped, the client re-establishes the connection using a cached copy of the password.

When Microsoft changed the default password mode, support was dropped for caching of the plain-text password. This means that when the registry parameter is changed to re-enable use of plain-text passwords it appears to work, but when a dropped service connection mapping attempts to revalidate, this will fail if the remote authentication server does not support encrypted passwords. It is definitely not a good idea to re-enable plain-text password support in such clients.

The following parameters can be used to work around the issue of Windows 9x/Me clients upper-casing usernames and passwords before transmitting them to the SMB server when using cleartext authentication:

password level = integer
username level = integer

By default Samba will convert to lower case the username before attempting to lookup the user in the database of local system accounts. Because UNIX usernames conventionally only contain lower-case characters, the username level parameter is rarely needed.

However, passwords on UNIX systems often make use of mixed-case characters. This means that in order for a user on a Windows 9x/Me client to connect to a Samba server using cleartext authentication, the password level must be set to the maximum number of upper case letters that could appear in a password. Note that if the server OS uses the traditional DES version of crypt(), a password level of 8 will result in case insensitive passwords as seen from Windows users. This will also result in longer login times as Samba has to compute the permutations of the password string and try them one by one until a match is located (or all combinations fail).

The best option to adopt is to enable support for encrypted passwords wherever Samba is used. Most attempts to apply the registry change to re-enable plain-text passwords will eventually lead to user complaints and unhappiness.

Common Errors

We all make mistakes. It is okay to make mistakes, as long as they are made in the right places and at the right time. A mistake that causes lost productivity is seldom tolerated, however a mistake made in a developmental test lab is expected.

Here we look at common mistakes and misapprehensions that have been the subject of discussions on the Samba mailing lists. Many of these are avoidable by doing your homework before attempting a Samba implementation. Some are the result of a misunderstanding of the English language. The English language, which has many phrases that are potentially vague and may be highly confusing to those for whom English is not their native tongue.

What Makes Samba a Server?

To some the nature of the Samba security mode is obvious, but entirely wrong all the same. It is assumed that security = server means that Samba will act as a server. Not so! This setting means that Samba will try to use another SMB server as its source for user authentication alone.

What Makes Samba a Domain Controller?

The smb.conf parameter security = domain does not really make Samba behave as a Domain Controller. This setting means we want Samba to be a Domain Member.

What Makes Samba a Domain Member?

Guess! So many others do. But whatever you do, do not think that security = user makes Samba act as a Domain Member. Read the manufacturer's manual before the warranty expires. See for more information.

Constantly Losing Connections to Password Server

Why does server_validate() simply give up rather than re-establish its connection to the password server? Though I am not fluent in the SMB protocol, perhaps the cluster server process passes along to its client workstation the session key it receives from the password server, which means the password hashes submitted by the client would not work on a subsequent connection whose session key would be different. So server_validate() must give up.

Indeed. That's why security = server is at best a nasty hack. Please use security = domain; security = server mode is also known as pass-through authentication.

Chapter 5. Domain Control

John H. Terpstra

Samba Team

Gerald (Jerry) Carter

Samba Team

David Bannon

Samba Team

Guenther Deschner

LDAP updates

There are many who approach MS Windows networking with incredible misconceptions. That's okay, because it gives the rest of us plenty of opportunity to be of assistance. Those who really want help would be well advised to become familiar with information that is already available.

The reader is advised not to tackle this section without having first understood and mastered some basics. MS Windows networking is not particularly forgiving of misconfiguration. Users of MS Windows networking are likely to complain of persistent niggles that may be caused by a broken network configuration. To a great many people, however, MS Windows networking starts with a Domain Controller that in some magical way is expected to solve all network operational ills.

The diagram in shows a typical MS Windows Domain Security network environment. Workstations A, B and C are representative of many physical MS Windows network clients.

Figure 5.1. An Example Domain.

An Example Domain.

From the Samba mailing list one can readily identify many common networking issues. If you are not clear on the following subjects, then it will do much good to read the sections of this HOWTO that deal with it. These are the most common causes of MS Windows networking problems:

  • Basic TCP/IP configuration.

  • NetBIOS name resolution.

  • Authentication configuration.

  • User and group configuration.

  • Basic file and directory permission control in UNIX/Linux.

  • Understanding how MS Windows clients interoperate in a network environment.

Do not be put off; on the surface of it MS Windows networking seems so simple that anyone can do it. In fact, it is not a good idea to set up an MS Windows network with inadequate training and preparation. But let's get our first indelible principle out of the way: It is perfectly okay to make mistakes! In the right place and at the right time, mistakes are the essence of learning. It is very much not okay to make mistakes that cause loss of productivity and impose an avoidable financial burden on an organization.

Where is the right place to make mistakes? Only out of harm's way. If you are going to make mistakes, then please do it on a test network, away from users and in such a way as to not inflict pain on others. Do your learning on a test network.

Features and Benefits

What is the key benefit of Microsoft Domain Security?

In a word, Single Sign On, or SSO for short. To many, this is the Holy Grail of MS Windows NT and beyond networking. SSO allows users in a well-designed network to log onto any workstation that is a member of the domain that their user account is in (or in a domain that has an appropriate trust relationship with the domain they are visiting) and they will be able to log onto the network and access resources (shares, files and printers) as if they are sitting at their home (personal) workstation. This is a feature of the Domain Security protocols.

The benefits of Domain Security are available to those sites that deploy a Samba PDC. A Domain provides a unique network security identifier (SID). Domain user and group security identifiers are comprised of the network SID plus a relative identifier (RID) that is unique to the account. User and Group SIDs (the network SID plus the RID) can be used to create Access Control Lists (ACLs) attached to network resources to provide organizational access control. UNIX systems recognize only local security identifiers.

Note

Network clients of an MS Windows Domain Security Environment must be Domain Members to be able to gain access to the advanced features provided. Domain Membership involves more than just setting the workgroup name to the Domain name. It requires the creation of a Domain trust account for the workstation (called a machine account). Refer to for more information.

The following functionalities are new to the Samba-3 release:

  • Windows NT4 domain trusts.

  • Adding users via the User Manager for Domains. This can be done on any MS Windows client using the Nexus.exe toolkit that is available from Microsoft's Web site. Samba-3 supports the use of the Microsoft Management Console for user management.

  • Introduces replaceable and multiple user account (authentication) backends. In the case where the backend is placed in an LDAP database, Samba-3 confers the benefits of a backend that can be distributed, replicated and is highly scalable.

  • Implements full Unicode support. This simplifies cross locale internationalization support. It also opens up the use of protocols that Samba-2.2.x had but could not use due to the need to fully support Unicode.

The following functionalities are not provided by Samba-3:

  • SAM replication with Windows NT4 Domain Controllers (i.e., a Samba PDC and a Windows NT BDC or vice versa). This means Samba cannot operate as a BDC when the PDC is Microsoft-based or replicate account data to Windows BDCs.

  • Acting as a Windows 2000 Domain Controller (i.e., Kerberos and Active Directory). In point of fact, Samba-3 does have some Active Directory Domain Control ability that is at this time purely experimental that is certain to change as it becomes a fully supported feature some time during the Samba-3 (or later) life cycle. However, Active Directory is more then just SMB it's also LDAP, Kerberos, DHCP, and other protocols (with proprietary extensions, of course).

  • The Windows 200x/XP MMC (Computer Management) Console can not be used to manage a Samba-3 server. For this you can use only the MS Windows NT4 Domain Server manager and the MS Windows NT4 Domain User Manager. Both are part of the SVRTOOLS.EXE package mentioned later.

Windows 9x/Me/XP Home clients are not true members of a domain for reasons outlined in this chapter. The protocol for support of Windows 9x/Me style network (domain) logons is completely different from NT4/Windows 200x type domain logons and has been officially supported for some time. These clients use the old LanMan Network Logon facilities that are supported in Samba since approximately the Samba-1.9.15 series.

Samba-3 implements group mapping between Windows NT groups and UNIX groups (this is really quite complicated to explain in a short space). This is discussed more fully in .

Samba-3, like an MS Windows NT4 PDC or a Windows 200x Active Directory, needs to store user and Machine Trust Account information in a suitable backend datastore. Refer to . With Samba-3 there can be multiple backends for this. A complete discussion of account database backends can be found in .

Basics of Domain Control

Over the years, public perceptions of what Domain Control really is has taken on an almost mystical nature. Before we branch into a brief overview of Domain Control, there are three basic types of Domain Controllers.

Domain Controller Types

  • Primary Domain Controller

  • Backup Domain Controller

  • ADS Domain Controller

The Primary Domain Controller or PDC plays an important role in MS Windows NT4. In Windows 200x Domain Control architecture, this role is held by Domain Controllers. Folklore dictates that because of its role in the MS Windows network, the Domain Controller should be the most powerful and most capable machine in the network. As strange as it may seem to say this here, good overall network performance dictates that the entire infrastructure needs to be balanced. It is advisable to invest more in Stand-alone (Domain Member) servers than in the Domain Controllers.

In the case of MS Windows NT4-style domains, it is the PDC that initiates a new Domain Control database. This forms a part of the Windows registry called the Security Account Manager (SAM). It plays a key part in NT4-type domain user authentication and in synchronization of the domain authentication database with Backup Domain Controllers.

With MS Windows 200x Server-based Active Directory domains, one Domain Controller initiates a potential hierarchy of Domain Controllers, each with their own area of delegated control. The master domain controller has the ability to override any downstream controller, but a downline controller has control only over its downline. With Samba-3, this functionality can be implemented using an LDAP-based user and machine account backend.

New to Samba-3 is the ability to use a backend database that holds the same type of data as the NT4-style SAM database (one of the registry files)[1].

The Backup Domain Controller or BDC plays a key role in servicing network authentication requests. The BDC is biased to answer logon requests in preference to the PDC. On a network segment that has a BDC and a PDC, the BDC will most likely service network logon requests. The PDC will answer network logon requests when the BDC is too busy (high load). A BDC can be promoted to a PDC. If the PDC is online at the time that a BDC is promoted to PDC, the previous PDC is automatically demoted to a BDC. With Samba-3, this is not an automatic operation; the PDC and BDC must be manually configured and changes also need to be made.

With MS Windows NT4, a decision is made at installation to determine what type of machine the server will be. It is possible to promote a BDC to a PDC and vice versa. The only way to convert a Domain Controller to a Domain Member server or a Stand-alone Server is to reinstall it. The install time choices offered are:

  • Primary Domain Controller the one that seeds the domain SAM.

  • Backup Domain Controller one that obtains a copy of the domain SAM.

  • Domain Member Server one that has no copy of the domain SAM, rather it obtains authentication from a Domain Controller for all access controls.

  • Stand-alone Server one that plays no part is SAM synchronization, has its own authentication database and plays no role in Domain Security.

With MS Windows 2000, the configuration of Domain Control is done after the server has been installed. Samba-3 is capable of acting fully as a native member of a Windows 200x server Active Directory domain.

New to Samba-3 is the ability to function fully as an MS Windows NT4-style Domain Controller, excluding the SAM replication components. However, please be aware that Samba-3 also supports the MS Windows 200x Domain Control protocols.

At this time any appearance that Samba-3 is capable of acting as an Domain Controller in native ADS mode is limited and experimental in nature. This functionality should not be used until the Samba Team offers formal support for it. At such a time, the documentation will be revised to duly reflect all configuration and management requirements. Samba can act as a NT4-style DC in a Windows 2000/XP environment. However, there are certain compromises:

  • No machine policy files.
  • No Group Policy Objects.
  • No synchronously executed AD logon scripts.
  • Can't use Active Directory management tools to manage users and machines.
  • Registry changes tattoo the main registry, while with AD they do not leave permanent changes in effect.
  • Without AD you cannot perform the function of exporting specific applications to specific users or groups.

Preparing for Domain Control

There are two ways that MS Windows machines may interact with each other, with other servers and with Domain Controllers: either as Stand-alone systems, more commonly called Workgroup members, or as full participants in a security system, more commonly called Domain members.

It should be noted that Workgroup membership involves no special configuration other than the machine being configured so the network configuration has a commonly used name for its workgroup entry. It is not uncommon for the name WORKGROUP to be used for this. With this mode of configurationi, there are no Machine Trust Accounts and any concept of membership as such is limited to the fact that all machines appear in the network neighborhood to be logically grouped together. Again, just to be clear: workgroup mode does not involve security machine accounts.

Domain Member machines have a machine account in the Domain accounts database. A special procedure must be followed on each machine to effect Domain Membership. This procedure, which can be done only by the local machine Administrator account, will create the Domain machine account (if it does not exist), and then initializes that account. When the client first logs onto the Domain it triggers a machine password change.

Note

When Samba is configured as a Domain Controller, secure network operation demands that all MS Windows NT4/200x/XP Professional clients should be configured as Domain Members. If a machine is not made a member of the Domain, then it will operate like a workgroup (Stand-alone) machine. Please refer to for information regarding Domain Membership.

The following are necessary for configuring Samba-3 as an MS Windows NT4-style PDC for MS Windows NT4/200x/XP clients:

  • Configuration of basic TCP/IP and MS Windows networking.

  • Correct designation of the Server Role (security = user).

  • Consistent configuration of Name Resolution[2].

  • Domain logons for Windows NT4/200x/XP Professional clients.

  • Configuration of Roaming Profiles or explicit configuration to force local profile usage.

  • Configuration of network/system policies.

  • Adding and managing domain user accounts.

  • Configuring MS Windows client machines to become Domain Members.

The following provisions are required to serve MS Windows 9x/Me clients:

  • Configuration of basic TCP/IP and MS Windows networking.

  • Correct designation of the server role (security = user).

  • Network Logon Configuration (since Windows 9x/Me/XP Home are not technically domain members, they do not really participate in the security aspects of Domain logons as such).

  • Roaming Profile Configuration.

  • Configuration of System Policy handling.

  • Installation of the network driver “Client for MS Windows Networks” and configuration to log onto the domain.

  • Placing Windows 9x/Me clients in User Level Security if it is desired to allow all client share access to be controlled according to domain user/group identities.

  • Adding and managing domain user accounts.

Note

Roaming Profiles and System/Network policies are advanced network administration topics that are covered in the and chapters of this document. However, these are not necessarily specific to a Samba PDC as much as they are related to Windows NT networking concepts.

A Domain Controller is an SMB/CIFS server that:

  • Registers and advertises itself as a Domain Controller (through NetBIOS broadcasts as well as by way of name registrations either by Mailslot Broadcasts over UDP broadcast, to a WINS server over UDP unicast, or via DNS and Active Directory).

  • Provides the NETLOGON service. (This is actually a collection of services that runs over mulitple protocols. These include the LanMan Logon service, the Netlogon service, the Local Security Account service, and variations of them.)

  • Provides a share called NETLOGON.

It is rather easy to configure Samba to provide these. Each Samba Domain Controller must provide the NETLOGON service that Samba calls the domain logons functionality (after the name of the parameter in the smb.conf file). Additionally, one server in a Samba-3 Domain must advertise itself as the Domain Master Browser[3]. This causes the Primary Domain Controller to claim a domain-specific NetBIOS name that identifies it as a Domain Master Browser for its given domain or workgroup. Local master browsers in the same domain or workgroup on broadcast-isolated subnets then ask for a complete copy of the browse list for the whole wide area network. Browser clients will then contact their Local Master Browser, and will receive the domain-wide browse list, instead of just the list for their broadcast-isolated subnet.

Domain Control Example Configuration

The first step in creating a working Samba PDC is to understand the parameters necessary in smb.conf. An example smb.conf for acting as a PDC can be found in .

Example 5.1. smb.conf for being a PDC

[global]
netbios name = BELERIAND
workgroup = MIDEARTH
passdb backend = tdbsam
os level = 33
preferred master = yes
domain master = yes
local master = yes
security = user
domain logons = yes
logon path = \\%N\profiles\%u
logon drive = H:
logon home = \\homeserver\%u\winprofile
logon script = logon.cmd
[netlogon]
path = /var/lib/samba/netlogon
read only = yes
write list = ntadmin
[profiles]
path = /var/lib/samba/profiles
read only = no
create mask = 0600
directory mask = 0700

The basic options shown in are explained as follows:

passdb backend

This contains all the user and group account information. Acceptable values for a PDC are: smbpasswd, tdbsam, and ldapsam. The “guest” entry provides default accounts and is included by default, there is no need to add it explicitly.

Where use of backup Domain Controllers (BDCs) is intended, the only logical choice is to use LDAP so the passdb backend can be distributed. The tdbsam and smbpasswd files cannot effectively be distributed and therefore should not be used.

Domain Control Parameters

The parameters os level, preferred master, domain master, security, encrypt passwords, and domain logons play a central role in assuring domain control and network logon support.

The os level must be set at or above a value of 32. A Domain Controller must be the Domain Master Browser, must be set in user mode security, must support Microsoft-compatible encrypted passwords, and must provide the network logon service (domain logons). Encrypted passwords must be enabled. For more details on how to do this, refer to .

Environment Parameters

The parameters logon path, logon home, logon drive, and logon script are environment support settings that help to facilitate client logon operations and that help to provide automated control facilities to ease network management overheads. Please refer to the man page information for these parameters.

NETLOGON Share

The NETLOGON share plays a central role in domain logon and Domain Membership support. This share is provided on all Microsoft Domain Controllers. It is used to provide logon scripts, to store Group Policy files (NTConfig.POL), as well as to locate other common tools that may be needed for logon processing. This is an essential share on a Domain Controller.

PROFILE Share

This share is used to store user desktop profiles. Each user must have a directory at the root of this share. This directory must be write-enabled for the user and must be globally read-enabled. Samba-3 has a VFS module called “fake_permissions” that may be installed on this share. This will allow a Samba administrator to make the directory read-only to everyone. Of course this is useful only after the profile has been properly created.

Note

The above parameters make for a full set of parameters that may define the server's mode of operation. The following smb.conf parameters are the essentials alone:

netbios name = BELERIAND
workgroup = MIDEARTH
domain logons = Yes
domain master = Yes
security = User

The additional parameters shown in the longer listing above just makes for a more complete explanation.

Samba ADS Domain Control

Samba-3 is not, and cannot act as, an Active Directory Server. It cannot truly function as an Active Directory Primary Domain Controller. The protocols for some of the functionality of Active Directory Domain Controllers has been partially implemented on an experimental only basis. Please do not expect Samba-3 to support these protocols. Do not depend on any such functionality either now or in the future. The Samba Team may remove these experimental features or may change their behavior. This is mentioned for the benefit of those who have discovered secret capabilities in Samba-3 and who have asked when this functionality will be completed. The answer is maybe or maybe never!

To be sure, Samba-3 is designed to provide most of the functionality that Microsoft Windows NT4-style Domain Controllers have. Samba-3 does not have all the capabilities of Windows NT4, but it does have a number of features that Windows NT4 domain contollers do not have. In short, Samba-3 is not NT4 and it is not Windows Server 200x, it is not an Active Directory server. We hope this is plain and simple enough for all to understand.

Domain and Network Logon Configuration

The subject of Network or Domain Logons is discussed here because it forms an integral part of the essential functionality that is provided by a Domain Controller.

Domain Network Logon Service

All Domain Controllers must run the netlogon service (domain logons in Samba). One Domain Controller must be configured with domain master = Yes (the Primary Domain Controller); on all Backup Domain Controllers domain master = No must be set.

Example Configuration

Example 5.2. smb.conf for being a PDC

[global]
domain logons = Yes
domain master = (Yes on PDC, No on BDCs)
[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
guest ok = Yes
browseable = No

The Special Case of MS Windows XP Home Edition

To be completely clear: If you want MS Windows XP Home Edition to integrate with your MS Windows NT4 or Active Directory Domain Security, understand it cannot be done. The only option is to purchase the upgrade from MS Windows XP Home Edition to MS Windows XP Professional.

Note

MS Windows XP Home Edition does not have the ability to join any type of Domain Security facility. Unlike MS Windows 9x/Me, MS Windows XP Home Edition also completely lacks the ability to log onto a network.

Now that this has been said, please do not ask the mailing list or email any of the Samba Team members with your questions asking how to make this work. It can't be done. If it can be done, then to do so would violate your software license agreement with Microsoft, and we recommend that you do not do that.

The Special Case of Windows 9x/Me

A domain and a workgroup are exactly the same in terms of network browsing. The difference is that a distributable authentication database is associated with a domain, for secure login access to a network. Also, different access rights can be granted to users if they successfully authenticate against a domain logon server. Samba-3 does this now in the same way as MS Windows NT/200x.

The SMB client logging on to a domain has an expectation that every other server in the domain should accept the same authentication information. Network browsing functionality of domains and workgroups is identical and is explained in this documentation under the browsing discussions. It should be noted that browsing is totally orthogonal to logon support.

Issues related to the single-logon network model are discussed in this section. Samba supports domain logons, network logon scripts and user profiles for MS Windows for workgroups and MS Windows 9X/ME clients, which are the focus of this section.

When an SMB client in a domain wishes to logon, it broadcasts requests for a logon server. The first one to reply gets the job, and validates its password using whatever mechanism the Samba administrator has installed. It is possible (but ill advised ) to create a domain where the user database is not shared between servers, i.e., they are effectively workgroup servers advertising themselves as participating in a domain. This demonstrates how authentication is quite different from but closely involved with domains.

Using these features you can make your clients verify their logon via the Samba server; make clients run a batch file when they logon to the network and download their preferences, desktop and start menu.

MS Windows XP Home edition is not able to join a domain and does not permit the use of domain logons.

Before launching into the configuration instructions, it is worthwhile to look at how a Windows 9x/Me client performs a logon:

  1. The client broadcasts (to the IP broadcast address of the subnet it is in) a NetLogon request. This is sent to the NetBIOS name DOMAIN<#1c> at the NetBIOS layer. The client chooses the first response it receives, which contains the NetBIOS name of the logon server to use in the format of \\SERVER.

  2. The client connects to that server, logs on (does an SMBsessetupX) and then connects to the IPC$ share (using an SMBtconX).

  3. The client does a NetWkstaUserLogon request, which retrieves the name of the user's logon script.

  4. The client then connects to the NetLogon share and searches for said script. If it is found and can be read, it is retrieved and executed by the client. After this, the client disconnects from the NetLogon share.

  5. The client sends a NetUserGetInfo request to the server to retrieve the user's home share, which is used to search for profiles. Since the response to the NetUserGetInfo request does not contain much more than the user's home share, profiles for Windows 9x clients must reside in the user home directory.

  6. The client connects to the user's home share and searches for the user's profile. As it turns out, you can specify the user's home share as a sharename and path. For example, \\server\fred\.winprofile. If the profiles are found, they are implemented.

  7. The client then disconnects from the user's home share and reconnects to the NetLogon share and looks for CONFIG.POL, the policies file. If this is found, it is read and implemented.

The main difference between a PDC and a Windows 9x/Me logon server configuration is:

  • Password encryption is not required for a Windows 9x/Me logon server. But note that beginning with MS Windows 98 the default setting is that plain-text password support is disabled. It can be re-enabled with the registry changes that are documented in .

  • Windows 9x/Me clients do not require and do not use Machine Trust Accounts.

A Samba PDC will act as a Windows 9x/Me logon server; after all, it does provide the network logon services that MS Windows 9x/Me expect to find.

Note

Use of plain-text passwords is strongly discouraged. Where used they are easily detected using a sniffer tool to examine network traffic.

Security Mode and Master Browsers

There are a few comments to make in order to tie up some loose ends. There has been much debate over the issue of whether it is okay to configure Samba as a Domain Controller in security modes other than user. The only security mode that will not work due to technical reasons is share-mode security. Domain and server mode security are really just a variation on SMB User Level Security.

Actually, this issue is also closely tied to the debate on whether Samba must be the Domain Master Browser for its workgroup when operating as a DC. While it may technically be possible to configure a server as such (after all, browsing and domain logons are two distinctly different functions), it is not a good idea to do so. You should remember that the DC must register the DOMAIN<#1b> NetBIOS name. This is the name used by Windows clients to locate the DC. Windows clients do not distinguish between the DC and the DMB. A DMB is a Domain Master Browser see . For this reason, it is wise to configure the Samba DC as the DMB.

Now back to the issue of configuring a Samba DC to use a mode other than security = user. If a Samba host is configured to use another SMB server or DC in order to validate user connection requests, it is a fact that some other machine on the network (the password server) knows more about the user than the Samba host. About 99% of the time, this other host is a Domain Controller. Now to operate in domain mode security, the workgroup parameter must be set to the name of the Windows NT domain (which already has a Domain Controller). If the domain does not already have a Domain Controller, you do not yet have a Domain.

Configuring a Samba box as a DC for a domain that already by definition has a PDC is asking for trouble. Therefore, you should always configure the Samba DC to be the DMB for its domain and set security = user. This is the only officially supported mode of operation.

Common Errors

$” Cannot Be Included in Machine Name

A machine account, typically stored in /etc/passwd, takes the form of the machine name with a “$” appended. FreeBSD (and other BSD systems) will not create a user with a “$” in the name.

The problem is only in the program used to make the entry. Once made, it works perfectly. Create a user without the “$”. Then use vipw to edit the entry, adding the “$”. Or create the whole entry with vipw if you like; make sure you use a unique user login ID.

Note

The machine account must have the exact name that the workstation has.

Note

The UNIX tool vipw is a common tool for directly editing the /etc/passwd file.

Joining Domain Fails Because of Existing Machine Account

I get told, `You already have a connection to the Domain....' or `Cannot join domain, the credentials supplied conflict with an existing set...' when creating a Machine Trust Account.

This happens if you try to create a Machine Trust Account from the machine itself and already have a connection (e.g., mapped drive) to a share (or IPC$) on the Samba PDC. The following command will remove all network drive connections:

C:\> net use * /d

Further, if the machine is already a “member of a workgroup” that is the same name as the domain you are joining (bad idea) you will get this message. Change the workgroup name to something else, it does not matter what, reboot, and try again.

The System Cannot Log You On (C000019B)

I joined the domain successfully but after upgrading to a newer version of the Samba code I get the message, `The system cannot log you on (C000019B), Please try again or consult your system administrator when attempting to logon.'

This occurs when the domain SID stored in the secrets.tdb database is changed. The most common cause of a change in domain SID is when the domain name and/or the server name (NetBIOS name) is changed. The only way to correct the problem is to restore the original domain SID or remove the domain client from the domain and rejoin. The domain SID may be reset using either the net or rpcclient utilities.

To reset or change the domain SID you can use the net command as follows:

root# net getlocalsid 'OLDNAME'
root# net setlocalsid 'SID'

Workstation Machine Trust Accounts work only with the Domain (or network) SID. If this SID changes Domain Members (workstations) will not be able to log onto the domain. The original Domain SID can be recovered from the secrets.tdb file. The alternative is to visit each workstation to re-join it to the domain.

The Machine Trust Account Is Not Accessible

When I try to join the domain I get the message, `The machine account for this computer either does not exist or is not accessible'. What's wrong?

This problem is caused by the PDC not having a suitable Machine Trust Account. If you are using the add machine script method to create accounts then this would indicate that it has not worked. Ensure the domain admin user system is working.

Alternately, if you are creating account entries manually then they have not been created correctly. Make sure that you have the entry correct for the Machine Trust Account in smbpasswd file on the Samba PDC. If you added the account using an editor rather than using the smbpasswd utility, make sure that the account name is the machine NetBIOS name with a “$” appended to it (i.e., computer_name$). There must be an entry in both /etc/passwd and the smbpasswd file.

Some people have also reported that inconsistent subnet masks between the Samba server and the NT client can cause this problem. Make sure that these are consistent for both client and server.

Account Disabled

When I attempt to login to a Samba Domain from a NT4/W200x workstation, I get a message about my account being disabled.

Enable the user accounts with smbpasswd -e username . This is normally done as an account is created.

Domain Controller Unavailable

Until a few minutes after Samba has started, clients get the error `Domain Controller Unavailable'

A Domain Controller has to announce its role on the network. This usually takes a while. Be patient for up to fifteen minutes, then try again.

Cannot Log onto Domain Member Workstation After Joining Domain

After successfully joining the domain, user logons fail with one of two messages: one to the effect that the Domain Controller cannot be found; the other claims that the account does not exist in the domain or that the password is incorrect. This may be due to incompatible settings between the Windows client and the Samba-3 server for schannel (secure channel) settings or smb signing settings. Check your Samba settings for client schannel, server schannel, client signing, server signing by executing:

testparm -v | more and looking for the value of these parameters.

Also use the Microsoft Management Console Local Security Settings. This tool is available from the Control Panel. The Policy settings are found in the Local Policies/Securty Options area and are prefixed by Secure Channel: ..., and Digitally sign .....

It is important that these be set consistently with the Samba-3 server settings.



[2] See , and .

Chapter 6. Backup Domain Control

John H. Terpstra

Samba Team

Volker Lendecke

Guenther Deschner

LDAP updates

Before you continue reading this section, please make sure that you are comfortable with configuring a Samba Domain Controller as described in .

Features and Benefits

This is one of the most difficult chapters to summarize. It does not matter what we say here for someone will still draw conclusions and/or approach the Samba Team with expectations that are either not yet capable of being delivered, or that can be achieved far more effectively using a totally different approach. In the event that you should have a persistent concern that is not addressed in this book, please email John H. Terpstra clearly setting out your requirements and/or question and we will do our best to provide a solution.

Samba-3 is capable of acting as a Backup Domain Controller (BDC) to another Samba Primary Domain Controller (PDC). A Samba-3 PDC can operate with an LDAP Account backend. The LDAP backend can be either a common master LDAP server, or a slave server. The use of a slave LDAP server has the benefit that when the master is down, clients may still be able to log onto the network. This effectively gives Samba a high degree of scalability and is an effective solution for large organizations. Do not use an LDAP slave server for a PDC, this may cause serious stability and operational problems.

While it is possible to run a Samba-3 BDC with non-LDAP backend, the administrator will need to figure out precisely what is the best way to replicate (copy/distribute) the user and machine accounts' backend.

The use of a non-LDAP backend SAM database is particularly problematic because Domain Member servers and workstations periodically change the Machine Trust Account password. The new password is then stored only locally. This means that in the absence of a centrally stored accounts database (such as that provided with an LDAP-based solution) if Samba-3 is running as a BDC, the BDC instance of the Domain Member trust account password will not reach the PDC (master) copy of the SAM. If the PDC SAM is then replicated to BDCs, this results in overwriting the SAM that contains the updated (changed) trust account password with resulting breakage of the domain trust.

Considering the number of comments and questions raised concerning how to configure a BDC, let's consider each possible option and look at the pros and cons for each possible solution. lists possible design configurations for a PDC/BDC infrastructure.

Table 6.1. Domain Backend Account Distribution Options

PDC BackendBDC BackendNotes/Discussion

Master LDAP Server

Slave LDAP Server

The optimal solution that provides high integrity. The SAM will be replicated to a common master LDAP server.

Single Central LDAP Server

Single Central LDAP Server

A workable solution without fail-over ability. This is a useable solution, but not optimal.

tdbsam

tdbsam + net rpc vampire

Does not work with Samba-3.0.0; may be implemented in a later release. The downside of this solution is that an external process will control account database integrity. This solution may appeal to sites that wish to avoid the complexity of LDAP. The net rpc vampire is used to synchronize domain accounts from the PDC to the BDC.

tdbsam

tdbsam + rsync

Do not use this configuration. Does not work because the TDB files are live and data may not have been flushed to disk. Use rsync to synchronize the TDB database files from the PDC to the BDC.

smbpasswd file

smbpasswd file

Do not use this configuration. Not an elegant solution due to the delays in synchronization. Use rsync to synchronize the TDB database files from the PDC to the BDC. Can be made to work using a cron job to synchronize data from the PDC to the BDC.

Essential Background Information

A Domain Controller is a machine that is able to answer logon requests from network workstations. Microsoft LanManager and IBM LanServer were two early products that provided this capability. The technology has become known as the LanMan Netlogon service.

When MS Windows NT3.10 was first released, it supported a new style of Domain Control and with it a new form of the network logon service that has extended functionality. This service became known as the NT NetLogon Service. The nature of this service has changed with the evolution of MS Windows NT and today provides a complex array of services that are implemented over an intricate spectrum of technologies.

MS Windows NT4-style Domain Control

Whenever a user logs into a Windows NT4/200x/XP Professional Workstation, the workstation connects to a Domain Controller (authentication server) to validate that the username and password the user entered are valid. If the information entered does not match account information that has been stored in the Domain Control database (the SAM, or Security Account Manager database), a set of error codes is returned to the workstation that has made the authentication request.

When the username/password pair has been validated, the Domain Controller (authentication server) will respond with full enumeration of the account information that has been stored regarding that user in the User and Machine Accounts database for that Domain. This information contains a complete network access profile for the user but excludes any information that is particular to the user's desktop profile, or for that matter it excludes all desktop profiles for groups that the user may belong to. It does include password time limits, password uniqueness controls, network access time limits, account validity information, machine names from which the user may access the network, and much more. All this information was stored in the SAM in all versions of MS Windows NT (3.10, 3.50, 3.51, 4.0).

The account information (user and machine) on Domain Controllers is stored in two files, one containing the Security information and the other the SAM. These are stored in files by the same name in the C:\Windows NT\System32\config directory. These are the files that are involved in replication of the SAM database where Backup Domain Controllers are present on the network.

There are two situations in which it is desirable to install Backup Domain Controllers:

  • On the local network that the Primary Domain Controller is on, if there are many workstations and/or where the PDC is generally very busy. In this case the BDCs will pick up network logon requests and help to add robustness to network services.

  • At each remote site, to reduce wide area network traffic and to add stability to remote network operations. The design of the network, the strategic placement of Backup Domain Controllers, together with an implementation that localizes as much of network to client interchange as possible will help to minimize wide area network bandwidth needs (and thus costs).

The inter-operation of a PDC and its BDCs in a true Windows NT4 environemt is worth mentioning here. The PDC contains the master copy of the SAM. In the event that an administrator makes a change to the user account database while physically present on the local network that has the PDC, the change will likely be made directly to the PDC instance of the master copy of the SAM. In the event that this update may be performed in a branch office, the change will likely be stored in a delta file on the local BDC. The BDC will then send a trigger to the PDC to commence the process of SAM synchronization. The PDC will then request the delta from the BDC and apply it to the master SAM. The PDC will then contact all the BDCs in the Domain and trigger them to obtain the update and then apply that to their own copy of the SAM.

Samba-3 can not participate in true SAM replication and is therefore not able to employ precisely the same protocols used by MS Windows NT4. A Samba-3 BDC will not create SAM update delta files. It will not inter-operate with a PDC (NT4 or Samba) to synchronize the SAM from delta files that are held by BDCs.

Samba-3 cannot function as a BDC to an MS Windows NT4 PDC, and Samba-3 can not function correctly as a PDC to an MS Windows NT4 BDC. Both Samba-3 and MS Windows NT4 can function as a BDC to its own type of PDC.

The BDC is said to hold a read-only of the SAM from which it is able to process network logon requests and authenticate users. The BDC can continue to provide this service, particularly while, for example, the wide area network link to the PDC is down. A BDC plays a very important role in both the maintenance of Domain Security as well as in network integrity.

In the event that the NT4 PDC should need to be taken out of service, or if it dies, one of the NT4 BDCs can be promoted to a PDC. If this happens while the original NT4 PDC is on line, it is automatically demoted to an NT4 BDC. This is an important aspect of Domain Controller management. The tool that is used to effect a promotion or a demotion is the Server Manager for Domains. It should be noted that Samba-3 BDCs can not be promoted in this manner because reconfiguration of Samba requires changes to the smb.conf file.

Example PDC Configuration

Beginning with Version 2.2, Samba officially supports domain logons for all current Windows clients, including Windows NT4, 2003 and XP Professional. For Samba to be enabled as a PDC, some parameters in the [global]-section of the smb.conf have to be set. Refer to for an example of the minimum required settings.

Example 6.1. Minimal smb.conf for a PDC in Use With a BDC LDAP Server on PDC.

workgroup = MIDEARTH
passdb backend = ldapsam://localhost:389
domain master = yes
domain logons = yes

Several other things like a [homes] and a [netlogon] share also need to be set along with settings for the profile path, the user's home drive, and so on. This is not covered in this chapter; for more information please refer to .

LDAP Configuration Notes

When configuring a master and a slave LDAP server, it is advisable to use the master LDAP server for the PDC and slave LDAP servers for the BDCs. It is not essential to use slave LDAP servers, however, many administrators will want to do so in order to provide redundant services. Of course, one or more BDCs may use any slave LDAP server. Then again, it is entirely possible to use a single LDAP server for the entire network.

When configuring a master LDAP server that will have slave LDAP servers, do not forget to configure this in the /etc/openldap/slapd.conf file. It must be noted that the DN of a server certificate must use the CN attribute to name the server, and the CN must carry the servers' fully qualified domain name. Additional alias names and wildcards may be present in the subjectAltName certificate extension. More details on server certificate names are in RFC2830.

It does not really fit within the scope of this document, but a working LDAP installation is basic to LDAP enabled Samba operation. When using an OpenLdap server with Transport Layer Security (TLS), the machine name in /etc/ssl/certs/slapd.pem must be the same as in /etc/openldap/sldap.conf. The Red Hat Linux startup script creates the slapd.pem file with hostname “localhost.localdomain.” It is impossible to access this LDAP server from a slave LDAP server (i.e., a Samba BDC) unless the certificate is recreated with a correct hostname.

Do not install a Samba PDC on a OpenLDAP slave server. Joining client machines to the domain will fail in this configuration because the change to the machine account in the LDAP tree must take place on the master LDAP server. This is not replicated rapidly enough to the slave server that the PDC queries. It therfore gives an error message on the client machine about not being able to set up account credentials. The machine account is created on the LDAP server but the password fields will be empty.

Possible PDC/BDC plus LDAP configurations include:

  • PDC+BDC -> One Central LDAP Server.

  • PDC -> LDAP master server, BDC -> LDAP slave server.

  • PDC -> LDAP master, with secondary slave LDAP server.

    BDC -> LDAP master, with secondary slave LDAP server.

  • PDC -> LDAP master, with secondary slave LDAP server.

    BDC -> LDAP slave server, with secondary master LDAP server.

In order to have a fall-back configuration (secondary) LDAP server one would specify the secondary LDAP server in the smb.conf file as shown in .

Example 6.2. Multiple LDAP Servers in smb.conf

...
passdb backend = ldapsam:ldap://master.quenya.org
ldapsam:ldap://slave.quenya.org
...

Active Directory Domain Control

As of the release of MS Windows 2000 and Active Directory, this information is now stored in a directory that can be replicated and for which partial or full administrative control can be delegated. Samba-3 is not able to be a Domain Controller within an Active Directory tree, and it cannot be an Active Directory server. This means that Samba-3 also cannot act as a Backup Domain Controller to an Active Directory Domain Controller.

What Qualifies a Domain Controller on the Network?

Every machine that is a Domain Controller for the domain MIDEARTH has to register the NetBIOS group name MIDEARTH<#1c> with the WINS server and/or by broadcast on the local network. The PDC also registers the unique NetBIOS name MIDEARTH<#1b> with the WINS server. The name type <#1b> name is normally reserved for the Domain Master Browser, a role that has nothing to do with anything related to authentication, but the Microsoft Domain implementation requires the Domain Master Browser to be on the same machine as the PDC.

Where a WINS server is not used, broadcast name registrations alone must suffice. Refer to for more information regarding TCP/IP network protocols and how SMB/CIFS names are handled.

How does a Workstation find its Domain Controller?

There are two different mechanisms to locate a domain controller, one method is used when NetBIOS over TCP/IP is enabled and the other when it has been disabled in the TCP/IP network configuration.

Where NetBIOS over TCP/IP is disabled, all name resolution involves the use of DNS, broadcast messaging over UDP, as well as Active Directory communication technologies. In this type of environment all machines require appropriate DNS entries. More information may be found in .

NetBIOS Over TCP/IP Enabled

An MS Windows NT4/200x/XP Professional workstation in the domain MIDEARTH that wants a local user to be authenticated has to find the Domain Controller for MIDEARTH. It does this by doing a NetBIOS name query for the group name MIDEARTH<#1c>. It assumes that each of the machines it gets back from the queries is a Domain Controller and can answer logon requests. To not open security holes, both the workstation and the selected Domain Controller authenticate each other. After that the workstation sends the user's credentials (name and password) to the local Domain Controller for validation.

NetBIOS Over TCP/IP Disabled

An MS Windows NT4/200x/XP Professional workstation in the realm quenya.org that has a need to affect user logon authentication will locate the Domain Controller by requerying DNS servers for the _ldap._tcp.pdc.ms-dcs.quenya.org record. More information regarding this subject may be found in .

Backup Domain Controller Configuration

The creation of a BDC requires some steps to prepare the Samba server before smbd is executed for the first time. These steps are outlines as follows:

  • The domain SID has to be the same on the PDC and the BDC. In Samba versions pre-2.2.5, the domain SID was stored in the file private/MACHINE.SID. The domain SID is now stored in the file private/secrets.tdb. This file is unique to each server and can not be copied from a PDC to a BDC, the BDC will generate a new SID at start-up. It will over-write the PDC domain SID with the newly created BDC SID. There is a procedure that will allow the BDC to aquire the Domain SID. This is described here.

    To retrieve the domain SID from the PDC or an existing BDC and store it in the secrets.tdb, execute:

    root# net rpc getsid
    
  • Specification of the ldap admin dn is obligatory. This also requires the LDAP administration password to be set in the secrets.tdb using the smbpasswd -w mysecret.

  • Either ldap suffix or ldap idmap suffix must be specified in the smb.conf file.

  • The UNIX user database has to be synchronized from the PDC to the BDC. This means that both the /etc/passwd and /etc/group have to be replicated from the PDC to the BDC. This can be done manually whenever changes are made. Alternately, the PDC is set up as an NIS master server and the BDC as an NIS slave server. To set up the BDC as a mere NIS client would not be enough, as the BDC would not be able to access its user database in case of a PDC failure. NIS is by no means the only method to synchronize passwords. An LDAP solution would also work.

  • The Samba password database must be replicated from the PDC to the BDC. Although it is possible to synchronize the smbpasswd file with rsync and ssh, this method is broken and flawed, and is therefore not recommended. A better solution is to set up slave LDAP servers for each BDC and a master LDAP server for the PDC.

  • The netlogon share has to be replicated from the PDC to the BDC. This can be done manually whenever login scripts are changed, or it can be done automatically using a cron job that will replicate the directory structure in this share using a tool like rsync.

Example Configuration

Finally, the BDC has to be found by the workstations. This can be done by setting Samba as shown in .

Example 6.3. Minimal setup for being a BDC

workgroup = MIDEARTH
passdb backend = ldapsam:ldap://slave-ldap.quenya.org
domain master = no
domain logons = yes
idmap backend = ldapsam:ldap://slave-ldap.quenya.org

In the [global]-section of the smb.conf of the BDC. This makes the BDC only register the name SAMBA<#1c> with the WINS server. This is no problem as the name SAMBA<#1c> is a NetBIOS group name that is meant to be registered by more than one machine. The parameter domain master = no forces the BDC not to register SAMBA<#1b> which as a unique NetBIOS name is reserved for the Primary Domain Controller.

The idmap backend will redirect the winbindd utility to use the LDAP database to resolve all UIDs and GIDs for UNIX accounts.

Note

Samba-3 has introduced a new ID mapping facility. One of the features of this facility is that it allows greater flexibility in how user and group IDs are handled in respect to NT Domain User and Group SIDs. One of the new facilities provides for explicitly ensuring that UNIX/Linux UID and GID values will be consistent on the PDC, all BDCs and all Domain Member servers. The parameter that controls this is called idmap backend. Please refer to the man page for smb.conf for more information regarding its behavior.

The use of the idmap backend = ldap://master.quenya/org option on a BDC only make sense where ldapsam is used on a PDC. The purpose for an LDAP based idmap backend is also to allow a domain-member (without its own passdb backend) to use winbindd to resolve Windows network users and groups to common UID/GIDs. In other words, this option is generally intended for use on BDCs and on Domain Member servers.

Common Errors

As this is a rather new area for Samba, there are not many examples that we may refer to. Updates will be published as they become available and may be found in later Samba releases or from the Samba web site.

Machine Accounts Keep Expiring

This problem will occur when the passdb (SAM) files are copied from a central server but the local Backup Domain Controller is acting as a PDC. This results in the application of Local Machine Trust Account password updates to the local SAM. Such updates are not copied back to the central server. The newer machine account password is then over written when the SAM is re-copied from the PDC. The result is that the Domain Member machine on start up will find that its passwords do not match the one now in the database and since the startup security check will now fail, this machine will not allow logon attempts to proceed and the account expiry error will be reported.

The solution is to use a more robust passdb backend, such as the ldapsam backend, setting up a slave LDAP server for each BDC, and a master LDAP server for the PDC.

Can Samba Be a Backup Domain Controller to an NT4 PDC?

No. The native NT4 SAM replication protocols have not yet been fully implemented.

Can I get the benefits of a BDC with Samba? Yes, but only to a Samba PDC.The main reason for implementing a BDC is availability. If the PDC is a Samba machine, a second Samba machine can be set up to service logon requests whenever the PDC is down.

How Do I Replicate the smbpasswd File?

Replication of the smbpasswd file is sensitive. It has to be done whenever changes to the SAM are made. Every user's password change is done in the smbpasswd file and has to be replicated to the BDC. So replicating the smbpasswd file very often is necessary.

As the smbpasswd file contains plain text password equivalents, it must not be sent unencrypted over the wire. The best way to set up smbpasswd replication from the PDC to the BDC is to use the utility rsync. rsync can use ssh as a transport. ssh itself can be set up to accept only rsync transfer without requiring the user to type a password.

As said a few times before, use of this method is broken and flawed. Machine trust accounts will go out of sync, resulting in a broken domain. This method is not recommended. Try using LDAP instead.

Can I Do This All with LDAP?

The simple answer is yes. Samba's pdb_ldap code supports binding to a replica LDAP server, and will also follow referrals and rebind to the master if it ever needs to make a modification to the database. (Normally BDCs are read only, so this will not occur often).

Chapter 7. Domain Membership

John H. Terpstra

Samba Team

Jeremy Allison

Samba Team

Gerald (Jerry) Carter

Samba Team

Andrew Tridgell

Samba Team

Jelmer R. Vernooij

The Samba Team

Guenther Deschner

LDAP updates

Domain Membership is a subject of vital concern. Samba must be able to participate as a member server in a Microsoft Domain Security context, and Samba must be capable of providing Domain machine member trust accounts, otherwise it would not be able to offer a viable option for many users.

This chapter covers background information pertaining to Domain Membership, the Samba configuration for it, and MS Windows client procedures for joining a domain. Why is this necessary? Because both are areas in which there exists within the current MS Windows networking world and particularly in the UNIX/Linux networking and administration world, a considerable level of misinformation, incorrect understanding and a lack of knowledge. Hopefully this chapter will fill the voids.

Features and Benefits

MS Windows workstations and servers that want to participate in Domain Security need to be made Domain Members. Participating in Domain Security is often called Single Sign On or SSO for short. This chapter describes the process that must be followed to make a workstation (or another server be it an MS Windows NT4 / 200x server) or a Samba server a member of an MS Windows Domain Security context.

Samba-3 can join an MS Windows NT4-style domain as a native member server, an MS Windows Active Directory Domain as a native member server, or a Samba Domain Control network. Domain Membership has many advantages:

  • MS Windows workstation users get the benefit of SSO.

  • Domain user access rights and file ownership/access controls can be set from the single Domain Security Account Manager (SAM) database (works with Domain Member servers as well as with MS Windows workstations that are Domain Members).

  • Only MS Windows NT4/200x/XP Professional workstations that are Domain Members can use network logon facilities.

  • Domain Member workstations can be better controlled through the use of Policy files (NTConfig.POL) and Desktop Profiles.

  • Through the use of logon scripts, users can be given transparent access to network applications that run off application servers.

  • Network administrators gain better application and user access management abilities because there is no need to maintain user accounts on any network client or server, other than the central Domain database (either NT4/Samba SAM style Domain, NT4 Domain that is backended with an LDAP directory, or via an Active Directory infrastructure).

MS Windows Workstation/Server Machine Trust Accounts

A Machine Trust Account is an account that is used to authenticate a client machine (rather than a user) to the Domain Controller server. In Windows terminology, this is known as a “Computer Account.” The purpose of the machine account is to prevent a rogue user and Domain Controller from colluding to gain access to a domain member workstation.

The password of a Machine Trust Account acts as the shared secret for secure communication with the Domain Controller. This is a security feature to prevent an unauthorized machine with the same NetBIOS name from joining the domain and gaining access to domain user/group accounts. Windows NT/200x/XP Professional clients use machine trust accounts, but Windows 9x/Me/XP Home clients do not. Hence, a Windows 9x/Me/XP Home client is never a true member of a Domain because it does not possess a Machine Trust Account, and, thus, has no shared secret with the Domain Controller.

A Windows NT4 PDC stores each Machine Trust Account in the Windows Registry. The introduction of MS Windows 2000 saw the introduction of Active Directory, the new repository for Machine Trust Accounts. A Samba PDC, however, stores each Machine Trust Account in two parts, as follows:

  • A Domain Security Account (stored in the passdb backend that has been configured in the smb.conf file. The precise nature of the account information that is stored depends on the type of backend database that has been chosen.

    The older format of this data is the smbpasswd database that contains the UNIX login ID, the UNIX user identifier (UID), and the LanMan and NT encrypted passwords. There is also some other information in this file that we do not need to concern ourselves with here.

    The two newer database types are called ldapsam, and tdbsam. Both store considerably more data than the older smbpasswd file did. The extra information enables new user account controls to be implemented.

  • A corresponding UNIX account, typically stored in /etc/passwd. Work is in progress to allow a simplified mode of operation that does not require UNIX user accounts, but this may not be a feature of the early releases of Samba-3.

There are three ways to create Machine Trust Accounts:

  • Manual creation from the UNIX/Linux command line. Here, both the Samba and corresponding UNIX account are created by hand.

  • Using the MS Windows NT4 Server Manager, either from an NT4 Domain Member server, or using the Nexus toolkit available from the Microsoft Web site. This tool can be run from any MS Windows machine as long as the user is logged on as the administrator account.

  • On-the-fly” creation. The Samba Machine Trust Account is automatically created by Samba at the time the client is joined to the domain. (For security, this is the recommended method.) The corresponding UNIX account may be created automatically or manually.

Manual Creation of Machine Trust Accounts

The first step in manually creating a Machine Trust Account is to manually create the corresponding UNIX account in /etc/passwd. This can be done using vipw or another “add user” command that is normally used to create new UNIX accounts. The following is an example for a Linux-based Samba server:

root# /usr/sbin/useradd -g machines -d /dev/null -c "machine nickname" \
   -s /bin/false machine_name$ 

root# passwd -l machine_name$

In the above example above there is an existing system group “machines” which is used as the primary group for all machine accounts. In the following examples the “machines” group has numeric GID equal 100.

On *BSD systems, this can be done using the chpass utility:

root# chpass -a \
'machine_name$:*:101:100::0:0:Windows machine_name:/dev/null:/sbin/nologin'

The /etc/passwd entry will list the machine name with a “$” appended, will not have a password, will have a null shell and no home directory. For example, a machine named “doppy” would have an /etc/passwd entry like this:

doppy$:x:505:100:machine_nickname:/dev/null:/bin/false

Above, machine_nickname can be any descriptive name for the client, i.e., BasementComputer. machine_name absolutely must be the NetBIOS name of the client to be joined to the domain. The “$” must be appended to the NetBIOS name of the client or Samba will not recognize this as a Machine Trust Account.

Now that the corresponding UNIX account has been created, the next step is to create the Samba account for the client containing the well-known initial Machine Trust Account password. This can be done using the smbpasswd command as shown here:

root# smbpasswd -a -m machine_name

where machine_name is the machine's NetBIOS name. The RID of the new machine account is generated from the UID of the corresponding UNIX account.

Join the client to the domain immediately

Manually creating a Machine Trust Account using this method is the equivalent of creating a Machine Trust Account on a Windows NT PDC using the Server Manager. From the time at which the account is created to the time the client joins the domain and changes the password, your domain is vulnerable to an intruder joining your domain using a machine with the same NetBIOS name. A PDC inherently trusts members of the domain and will serve out a large degree of user information to such clients. You have been warned!

Managing Domain Machine Accounts using NT4 Server Manager

A working add machine script script is essential for machine trust accounts to be automatically created. This applies no matter whether one uses automatic account creation, or if one wishes to use the NT4 Domain Server Manager.

If the machine from which you are trying to manage the domain is an MS Windows NT4 workstation or MS Windows 200x/XP Professional, the tool of choice is the package called SRVTOOLS.EXE. When executed in the target directory it will unpack SrvMgr.exe and UsrMgr.exe (both are domain management tools for MS Windows NT4 workstation).

If your workstation is a Microsoft Windows 9x/Me family product you should download the Nexus.exe package from the Microsoft web site. When executed from the target directory this will unpack the same tools but for use on this platform.

Further information about these tools may be obtained from the following locations:

http://support.microsoft.com/default.aspx?scid=kb;en-us;173673
http://support.microsoft.com/default.aspx?scid=kb;en-us;172540

Launch the srvmgr.exe (Server Manager for Domains) and follow these steps:

Procedure 7.1. Server Manager Account Machine Account Management

  1. From the menu select Computer.

  2. Click Select Domain.

  3. Click the name of the domain you wish to administer in the Select Domain panel and then click OK.

  4. Again from the menu select Computer.

  5. Select Add to Domain.

  6. In the dialog box, click the radio button to Add NT Workstation of Server, then enter the machine name in the field provided, and click the Add button.

On-the-Fly Creation of Machine Trust Accounts

The second (and recommended) way of creating Machine Trust Accounts is simply to allow the Samba server to create them as needed when the client is joined to the domain.

Since each Samba Machine Trust Account requires a corresponding UNIX account, a method for automatically creating the UNIX account is usually supplied; this requires configuration of the add machine script option in smb.conf. This method is not required, however, corresponding UNIX accounts may also be created manually.

Here is an example for a Red Hat Linux system.

[global]
# <...remainder of parameters...>
add machine script = /usr/sbin/useradd -d /dev/null -g 100 \
-s /bin/false -M %u

Making an MS Windows Workstation or Server a Domain Member

The procedure for making an MS Windows workstation or server a member of the domain varies with the version of Windows.

Windows 200x/XP Professional Client

When the user elects to make the client a Domain Member, Windows 200x prompts for an account and password that has privileges to create machine accounts in the domain. A Samba Administrator Account (i.e., a Samba account that has root privileges on the Samba server) must be entered here; the operation will fail if an ordinary user account is given.

For security reasons, the password for this Administrator Account should be set to a password that is other than that used for the root user in /etc/passwd.

The name of the account that is used to create Domain Member machine accounts can be anything the network administrator may choose. If it is other than root then this is easily mapped to root in the file named in the smb.conf parameter username map = /etc/samba/smbusers.

The session key of the Samba Administrator Account acts as an encryption key for setting the password of the machine trust account. The Machine Trust Account will be created on-the-fly, or updated if it already exists.

Windows NT4 Client

If the Machine Trust Account was created manually, on the Identification Changes menu enter the domain name, but do not check the box Create a Computer Account in the Domain. In this case, the existing Machine Trust Account is used to join the machine to the domain.

If the Machine Trust Account is to be created on-the-fly, on the Identification Changes menu enter the domain name and check the box Create a Computer Account in the Domain. In this case, joining the domain proceeds as above for Windows 2000 (i.e., you must supply a Samba Administrator Account when prompted).

Samba Client

Joining a Samba client to a domain is documented in .

Domain Member Server

This mode of server operation involves the Samba machine being made a member of a domain security context. This means by definition that all user authentication will be done from a centrally defined authentication regime. The authentication regime may come from an NT3/4-style (old domain technology) server, or it may be provided from an Active Directory server (ADS) running on MS Windows 2000 or later.

Of course it should be clear that the authentication backend itself could be from any distributed directory architecture server that is supported by Samba. This can be LDAP (from OpenLDAP), or Sun's iPlanet, or NetWare Directory Server, and so on.

Note

When Samba is configured to use an LDAP, or other identity management and/or directory service, it is Samba that continues to perform user and machine authentication. It should be noted that the LDAP server does not perform authentication handling in place of what Samba is designed to do.

Please refer to , for more information regarding how to create a domain machine account for a Domain Member server as well as for information on how to enable the Samba Domain Member machine to join the domain and be fully trusted by it.

Joining an NT4-type Domain with Samba-3

lists names that have been used in the remainder of this chapter.

Table 7.1. Assumptions

NetBIOS name:SERV1
Windows 200x/NT domain name:MIDEARTH
Domain's PDC NetBIOS name:DOMPDC
Domain's BDC NetBIOS names:DOMBDC1 and DOMBDC2

First, you must edit your smb.conf file to tell Samba it should now use domain security.

Change (or add) your security line in the [global] section of your smb.conf to read:

security = domain

Next change the workgroup line in the [global] section to read:

workgroup = MIDEARTH

This is the name of the domain we are joining.

You must also have the parameter encrypt passwords set to yes in order for your users to authenticate to the NT PDC. This is the defaulty setting if this parameter is not specified. There is no need to specify this parameter, but if it is specified in the smb.conf file, it must be set to Yes.

Finally, add (or modify) a password server line in the [global] section to read:

password server = DOMPDC DOMBDC1 DOMBDC2

These are the primary and backup Domain Controllers Samba will attempt to contact in order to authenticate users. Samba will try to contact each of these servers in order, so you may want to rearrange this list in order to spread out the authentication load among Domain Controllers.

Alternately, if you want smbd to automatically determine the list of Domain Controllers to use for authentication, you may set this line to be:

password server = *

This method allows Samba to use exactly the same mechanism that NT does. The method either uses broadcast-based name resolution, performs a WINS database lookup in order to find a Domain Controller against which to authenticate, or locates the Domain Controller using DNS name resolution.

To join the domain, run this command:

root# net join -S DOMPDC -UAdministrator%password

If the -S DOMPDC argument is not given, the domain name will be obtained from smb.conf.

The machine is joining the domain DOM, and the PDC for that domain (the only machine that has write access to the domain SAM database) is DOMPDC, therefore use the -S option. The Administrator%password is the login name and password for an account that has the necessary privilege to add machines to the domain. If this is successful, you will see the message in your terminal window the text shown below. Where the older NT4 style domain architecture is used:

Joined domain DOM.

Where Active Directory is used:

Joined SERV1 to realm MYREALM.

Refer to the net man page for further information.

This process joins the server to the domain without having to create the machine trust account on the PDC beforehand.

This command goes through the machine account password change protocol, then writes the new (random) machine account password for this Samba server into a file in the same directory in which a smbpasswd file would be normally stored:

/usr/local/samba/private/secrets.tdb
or 
/etc/samba/secrets.tdb.

This file is created and owned by root and is not readable by any other user. It is the key to the Domain-level security for your system, and should be treated as carefully as a shadow password file.

Finally, restart your Samba daemons and get ready for clients to begin using domain security. The way you can restart your Samba daemons depends on your distribution, but in most cases the following will suffice:

root# /etc/init.d/samba restart

Why Is This Better Than security = server?

Currently, domain security in Samba does not free you from having to create local UNIX users to represent the users attaching to your server. This means that if Domain user DOM\fred attaches to your Domain Security Samba server, there needs to be a local UNIX user fred to represent that user in the UNIX file system. This is similar to the older Samba security mode security = server, where Samba would pass through the authentication request to a Windows NT server in the same way as a Windows 95 or Windows 98 server would.

Please refer to , for information on a system to automatically assign UNIX UIDs and GIDs to Windows NT Domain users and groups.

The advantage to Domain-level security is that the authentication in Domain-level security is passed down the authenticated RPC channel in exactly the same way that an NT server would do it. This means Samba servers now participate in domain trust relationships in exactly the same way NT servers do (i.e., you can add Samba servers into a resource domain and have the authentication passed on from a resource domain PDC to an account domain PDC).

In addition, with security = server, every Samba daemon on a server has to keep a connection open to the authenticating server for as long as that daemon lasts. This can drain the connection resources on a Microsoft NT server and cause it to run out of available connections. With security = domain, however, the Samba daemons connect to the PDC/BDC only for as long as is necessary to authenticate the user and then drop the connection, thus conserving PDC connection resources.

And finally, acting in the same manner as an NT server authenticating to a PDC means that as part of the authentication reply, the Samba server gets the user identification information such as the user SID, the list of NT groups the user belongs to, and so on.

Note

Much of the text of this document was first published in the Web magazine LinuxWorld as the article http://www.linuxworld.com/linuxworld/lw-1998-10/lw-10-samba.html Doing the NIS/NT Samba.

Samba ADS Domain Membership

This is a rough guide to setting up Samba-3 with Kerberos authentication against a Windows 200x KDC. A familiarity with Kerberos is assumed.

Configure smb.conf

You must use at least the following three options in smb.conf:

realm = your.kerberos.REALM
security = ADS
# The following parameter need only be specified if present.
# The default setting is not present is Yes.
encrypt passwords = yes

In case samba cannot correctly identify the appropriate ADS server using the realm name, use the password server option in smb.conf:

password server = your.kerberos.server

Note

You do not need a smbpasswd file, and older clients will be authenticated as if security = domain, although it will not do any harm and allows you to have local users not in the domain.

Configure /etc/krb5.conf

With both MIT and Heimdal Kerberos, this is unnecessary, and may be detrimental. All ADS domains will automatically create SRV records in the DNS zone _kerberos.REALM.NAME for each KDC in the realm. MIT's, as well as Heimdal's, KRB5 libraries default to checking for these records, so they will automatically find the KDCs. In addition, krb5.conf only allows specifying a single KDC, even there if there is more than one. Using the DNS lookup allows the KRB5 libraries to use whichever KDCs are available.

When manually configuring krb5.conf, the minimal configuration is:

[libdefaults]
   default_realm = YOUR.KERBEROS.REALM

	[realms]
	YOUR.KERBEROS.REALM = {
	kdc = your.kerberos.server
	    }

When using Heimdal versions before 0.6 use the following configuration settings:

[libdefaults]
   default_realm      = YOUR.KERBEROS.REALM
   default_etypes     = des-cbc-crc des-cbc-md5
   default_etypes_des = des-cbc-crc des-cbc-md5

        [realms]
        YOUR.KERBEROS.REALM = {
        kdc = your.kerberos.server
            }

Test your config by doing a kinit USERNAME@REALM and making sure that your password is accepted by the Win2000 KDC.

With Heimdal versions earlier than 0.6.x you only can use newly created accounts in ADS or accounts that have had the password changed once after migration, or in case of Administrator after installation. At the moment, a Windows 2003 KDC can only be used with a Heimdal releases later than 0.6 (and no default etypes in krb5.conf). Unfortunatly this whole area is still in a state of flux.

Note

The realm must be in uppercase or you will get “Cannot find KDC for requested realm while getting initial credentials” error (Kerberos is case-sensitive!).

Note

Time between the two servers must be synchronized. You will get a “kinit(v5): Clock skew too great while getting initial credentials” if the time difference is more than five minutes.

Clock skew limits are configurable in the Kerberos protocols. The default setting is five minutes.

You also must ensure that you can do a reverse DNS lookup on the IP address of your KDC. Also, the name that this reverse lookup maps to must either be the NetBIOS name of the KDC (i.e., the hostname with no domain attached) or it can alternately be the NetBIOS name followed by the realm.

The easiest way to ensure you get this right is to add a /etc/hosts entry mapping the IP address of your KDC to its NetBIOS name. If you do not get this correct then you will get a local error when you try to join the realm.

If all you want is Kerberos support in smbclient then you can skip directly to now. and are needed only if you want Kerberos support for smbd and winbindd.

Create the Computer Account

As a user who has write permission on the Samba private directory (usually root), run:

root#  net ads join -U Administrator%password

When making a Windows client a member of an ADS domain within a complex organization, you may want to create the machine account within a particular organizational unit. Samba-3 permits this to be done using the following syntax:

root#   kinit Administrator@your.kerberos.REALM
root#  net ads join “organizational_unit

For example, you may want to create the machine account in a container called “Servers” under the organizational directory “Computers\BusinessUnit\Department” like this:

root#  net ads join "Computers\BusinessUnit\Department\Servers"

Possible Errors

ADS support not compiled in

Samba must be reconfigured (remove config.cache) and recompiled (make clean all install) after the Kerberos libiraries and headers files are installed.

net ads join prompts for user name

You need to login to the domain using kinit USERNAME@REALM. USERNAME must be a user who has rights to add a machine to the domain.

Unsupported encryption/or checksum types

Make sure that the /etc/krb5.conf is correctly configured for the type and version of Kerberos installed on the system.

Testing Server Setup

If the join was successful, you will see a new computer account with the NetBIOS name of your Samba server in Active Directory (in the “Computers” folder under Users and Computers.

On a Windows 2000 client, try net use * \\server\share. You should be logged in with Kerberos without needing to know a password. If this fails then run klist tickets. Did you get a ticket for the server? Does it have an encryption type of DES-CBC-MD5?

Note

Samba can use both DES-CBC-MD5 encryption as well as ARCFOUR-HMAC-MD5 encoding.

Testing with smbclient

On your Samba server try to login to a Win2000 server or your Samba server using smbclient and Kerberos. Use smbclient as usual, but specify the -k option to choose Kerberos authentication.

Notes

You must change administrator password at least once after DC install, to create the right encryption types.

Windows 200x does not seem to create the _kerberos._udp and _ldap._tcp in the default DNS setup. Perhaps this will be fixed later in service packs.

Sharing User ID Mappings between Samba Domain Members

Samba maps UNIX users and groups (identified by UIDs and GIDs) to Windows users and groups (identified by SIDs). These mappings are done by the idmap subsystem of Samba.

In some cases it is useful to share these mappings between Samba Domain Members, so name->id mapping is identical on all machines. This may be needed in particular when sharing files over both CIFS and NFS.

To use the LDAP ldap idmap suffix, set:

ldap idmap suffix = ou=Idmap,dc=quenya,dc=org

See the smb.conf man page entry for the ldap idmap suffix parameter for further information.

Do not forget to specify also the ldap admin dn and to make certain to set the LDAP administrative password into the secrets.tdb using:

root#  smbpasswd -w ldap-admin-password

Common Errors

In the process of adding/deleting/re-adding Domain Member machine accounts, there are many traps for the unwary player and many “little” things that can go wrong. It is particularly interesting how often subscribers on the Samba mailing list have concluded after repeated failed attempts to add a machine account that it is necessary to “re-install” MS Windows on the machine. In truth, it is seldom necessary to reinstall because of this type of problem. The real solution is often quite simple and with an understanding of how MS Windows networking functions, it is easy to overcome.

Cannot Add Machine Back to Domain

A Windows workstation was re-installed. The original domain machine account was deleted and added immediately. The workstation will not join the domain if I use the same machine name. Attempts to add the machine fail with a message that the machine already exists on the network I know it does not. Why is this failing?

The original name is still in the NetBIOS name cache and must expire after machine account deletion before adding that same name as a Domain Member again. The best advice is to delete the old account and then add the machine with a new name.

Adding Machine to Domain Fails

Adding a Windows 200x or XP Professional machine to the Samba PDC Domain fails with a message that, `The machine could not be added at this time, there is a network problem. Please try again later.' Why?

You should check that there is an add machine script in your smb.conf file. If there is not, please add one that is appropriate for your OS platform. If a script has been defined, you will need to debug its operation. Increase the log level in the smb.conf file to level 10, then try to rejoin the domain. Check the logs to see which operation is failing.

Possible causes include:

  • The script does not actually exist, or could not be located in the path specified.

    Corrective action: Fix it. Make sure when run manually that the script will add both the UNIX system account and the Samba SAM account.

  • The machine could not be added to the UNIX system accounts file /etc/passwd.

    Corrective action: Check that the machine name is a legal UNIX system account name. If the UNIX utility useradd is called, then make sure that the machine name you are trying to add can be added using this tool. Useradd on some systems will not allow any upper case characters nor will it allow spaces in the name.

The add machine script does not create the machine account in the Samba backend database, it is there only to create a UNIX system account to which the Samba backend database account can be mapped.

I Can't Join a Windows 2003 PDC

Windows 2003 requires SMB signing. Client side SMB signing has been implemented in Samba-3.0. Set client use spnego = yes when communicating with a Windows 2003 server.

Chapter 8. Stand-alone Servers

John H. Terpstra

Samba Team

Stand-alone Servers are independent of Domain Controllers on the network. They are not Domain Members and function more like workgroup servers. In many cases a Stand-alone Server is configured with a minimum of security control with the intent that all data served will be readily accessible to all users.

Features and Benefits

Stand-alone Servers can be as secure or as insecure as needs dictate. They can have simple or complex configurations. Above all, despite the hoopla about Domain Security they remain a common installation.

If all that is needed is a server for read-only files, or for printers alone, it may not make sense to effect a complex installation. For example: A drafting office needs to store old drawings and reference standards. Noone can write files to the server as it is legislatively important that all documents remain unaltered. A share mode read-only Stand-alone Server is an ideal solution.

Another situation that warrants simplicity is an office that has many printers that are queued off a single central server. Everyone needs to be able to print to the printers, there is no need to effect any access controls and no files will be served from the print server. Again, a share mode Stand-alone Server makes a great solution.

Background

The term Stand-alone Server means that it will provide local authentication and access control for all resources that are available from it. In general this means that there will be a local user database. In more technical terms, it means resources on the machine will be made available in either SHARE mode or in USER mode.

No special action is needed other than to create user accounts. Stand-alone servers do not provide network logon services. This means that machines that use this server do not perform a domain logon to it. Whatever logon facility the workstations are subject to is independent of this machine. It is, however, necessary to accommodate any network user so the logon name they use will be translated (mapped) locally on the Stand-alone Server to a locally known user name. There are several ways this can be done.

Samba tends to blur the distinction a little in respect of what is a Stand-alone Server. This is because the authentication database may be local or on a remote server, even if from the SMB protocol perspective the Samba server is not a member of a domain security context.

Through the use of Pluggable Authentication Modules (PAM) and the name service switcher (NSSWITCH), which maintains the UNIX-user database) the source of authentication may reside on another server. We would be inclined to call this the authentication server. This means that the Samba server may use the local UNIX/Linux system password database (/etc/passwd or /etc/shadow), may use a local smbpasswd file, or may use an LDAP backend, or even via PAM and Winbind another CIFS/SMB server for authentication.

Example Configuration

The examples, , and link linkend="SimplePrintServer"/>, are designed to inspire simplicity. It is too easy to attempt a high level of creativity and to introduce too much complexity in server and network design.

Reference Documentation Server

Configuration of a read-only data server that everyone can access is very simple. is the smb.conf file that will do this. Assume that all the reference documents are stored in the directory /export, and the documents are owned by a user other than nobody. No home directories are shared, and there are no users in the /etc/passwd UNIX system database. This is a simple system to administer.

Example 8.1. smb.conf for Reference Documentation Server

# Global parameters
[global]
workgroup = MIDEARTH
netbios name = GANDALF
security = SHARE
passdb backend = guest
wins server = 192.168.1.1
[data]
comment = Data
path = /export
guest only = Yes

In above, the machine name is set to GANDALF, the workgroup is set to the name of the local workgroup (MIDEARTH) so the machine will appear together with systems with which users are familiar. The only password backend required is the “guest” backend to allow default unprivileged account names to be used. As there is a WINS server on this networki, we of obviously make use of it.

Central Print Serving

Configuration of a simple print server is easy if you have all the right tools on your system.

Assumptions:

  1. The print server must require no administration.

  2. The print spooling and processing system on our print server will be CUPS. (Please refer to for more information).

  3. The print server will service only network printers. The network administrator will correctly configure the CUPS environment to support the printers.

  4. All workstations will use only postscript drivers. The printer driver of choice is the one shipped with the Windows OS for the Apple Color LaserWriter.

In this example our print server will spool all incoming print jobs to /var/spool/samba until the job is ready to be submitted by Samba to the CUPS print processor. Since all incoming connections will be as the anonymous (guest) user, two things will be required:

Enabling Anonymous Printing

  • The UNIX/Linux system must have a guest account. The default for this is usually the account nobody. To find the correct name to use for your version of Samba, do the following:

    $ testparm -s -v | grep "guest account"
    

    Make sure that this account exists in your system password database (/etc/passwd).

  • The directory into which Samba will spool the file must have write access for the guest account. The following commands will ensure that this directory is available for use:

    root# mkdir /var/spool/samba
    root# chown nobody.nobody /var/spool/samba
    root# chmod a+rwt /var/spool/samba
    

The contents of the smb.conf file is shown in .

Example 8.2. smb.conf for Anonymous Printing

# Global parameters
[global]
workgroup = MIDEARTH
netbios name = GANDALF
security = SHARE
passdb backend = guest
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
printer admin = root
guest ok = Yes
printable = Yes
use client driver = Yes
browseable = No

Note

On CUPS-enabled systems there is a facility to pass raw data directly to the printer without intermediate processing via CUPS print filters. Where use of this mode of operation is desired, it is necessary to configure a raw printing device. It is also necessary to enable the raw mime handler in the /etc/mime.conv and /etc/mime.types files. Refer to .

Common Errors

The greatest mistake so often made is to make a network configuration too complex. It pays to use the simplest solution that will meet the needs of the moment.

Chapter 9. MS Windows Network Configuration Guide

John H. Terpstra

Samba Team

Table of Contents

Note

Note

This chapter did not make it into this release. It is planned for the published release of this document.

Advanced Configuration

Valuable Nuts and Bolts Information

Samba has several features that you might want or might not want to use. The chapters in this part each cover specific Samba features.

Table of Contents

10. Network Browsing
Features and Benefits
What Is Browsing?
Discussion
NetBIOS over TCP/IP
TCP/IP without NetBIOS
DNS and Active Directory
How Browsing Functions
Configuring WORKGROUP Browsing
DOMAIN Browsing Configuration
Forcing Samba to Be the Master
Making Samba the Domain Master
Note about Broadcast Addresses
Multiple Interfaces
Use of the Remote Announce Parameter
Use of the Remote Browse Sync Parameter
WINS The Windows Internetworking Name Server
WINS Server Configuration
WINS Replication
Static WINS Entries
Helpful Hints
Windows Networking Protocols
Name Resolution Order
Technical Overview of Browsing
Browsing Support in Samba
Problem Resolution
Cross-Subnet Browsing
Common Errors
How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
Server Resources Can Not Be Listed
I get an `Unable to browse the network' error
Browsing of Shares and Directories is Very Slow
11. Account Information Databases
Features and Benefits
Backward Compatibility Backends
New Backends
Technical Information
Important Notes About Security
Mapping User Identifiers between MS Windows and UNIX
Mapping Common UIDs/GIDs on Distributed Machines
Account Management Tools
The smbpasswd Command
The pdbedit Command
Password Backends
Plaintext
smbpasswd Encrypted Password Database
tdbsam
ldapsam
MySQL
XML
Common Errors
Users Cannot Logon
Users Being Added to the Wrong Backend Database
Configuration of auth methods
12. Group Mapping MS Windows and UNIX
Features and Benefits
Discussion
Default Users, Groups and Relative Identifiers
Example Configuration
Configuration Scripts
Sample smb.conf Add Group Script
Script to Configure Group Mapping
Common Errors
Adding Groups Fails
Adding MS Windows Groups to MS Windows Groups Fails
Adding Domain Users to the Power Users Group
13. File, Directory and Share Access Controls
Features and Benefits
File System Access Controls
MS Windows NTFS Comparison with UNIX File Systems
Managing Directories
File and Directory Access Control
Share Definition Access Controls
User and Group-Based Controls
File and Directory Permissions-Based Controls
Miscellaneous Controls
Access Controls on Shares
Share Permissions Management
MS Windows Access Control Lists and UNIX Interoperability
Managing UNIX Permissions Using NT Security Dialogs
Viewing File Security on a Samba Share
Viewing File Ownership
Viewing File or Directory Permissions
Modifying File or Directory Permissions
Interaction with the Standard Samba create mask Parameters
Interaction with the Standard Samba File Attribute Mapping
Common Errors
Users Cannot Write to a Public Share
File Operations Done as root with force user Set
MS Word with Samba Changes Owner of File
14. File and Record Locking
Features and Benefits
Discussion
Opportunistic Locking Overview
Samba Opportunistic Locking Control
Example Configuration
MS Windows Opportunistic Locking and Caching Controls
Workstation Service Entries
Server Service Entries
Persistent Data Corruption
Common Errors
locking.tdb Error Messages
Problems Saving Files in MS Office on Windows XP
Long Delays Deleting Files Over Network with XP SP1
Additional Reading
15. Securing Samba
Introduction
Features and Benefits
Technical Discussion of Protective Measures and Issues
Using Host-Based Protection
User-Based Protection
Using Interface Protection
Using a Firewall
Using IPC$ Share-Based Denials
NTLMv2 Security
Upgrading Samba
Common Errors
Smbclient Works on Localhost, but the Network Is Dead
Why Can Users Access Home Directories of Other Users?
16. Interdomain Trust Relationships
Features and Benefits
Trust Relationship Background
Native MS Windows NT4 Trusts Configuration
Creating an NT4 Domain Trust
Completing an NT4 Domain Trust
Inter-Domain Trust Facilities
Configuring Samba NT-Style Domain Trusts
Samba as the Trusted Domain
Samba as the Trusting Domain
NT4-Style Domain Trusts with Windows 2000
Common Errors
17. Hosting a Microsoft Distributed File System tree on Samba
Features and Benefits
Common Errors
MSDFS UNIX Path Is Case-Critical
18. Classical Printing Support
Features and Benefits
Technical Introduction
Client to Samba Print Job Processing
Printing Related Configuration Parameters
Simple Print Configuration
Verifing Configuration with testparm
Rapid Configuration Validation
Extended Printing Configuration
Detailed Explanation Settings
Printing Developments Since Samba-2.2
Point'n'Print Client Drivers on Samba Servers
The Obsoleted [printer$] Section
Creating the [print$] Share
[print$] Section Parameters
The [print$] Share Directory
Installing Drivers into [print$]
Add Printer Wizard Driver Installation
Installing Print Drivers Using rpcclient
Client Driver Installation Procedure
First Client Driver Installation
Setting Device Modes on New Printers
Additional Client Driver Installation
Always Make First Client Connection as root or printer admin
Other Gotchas
Setting Default Print Options for Client Drivers
Supporting Large Numbers of Printers
Adding New Printers with the Windows NT APW
Error Message: Cannot connect under a different Name
Take Care When Assembling Driver Files
Samba and Printer Ports
Avoiding Common Client Driver Misconfiguration
The Imprints Toolset
What is Imprints?
Creating Printer Driver Packages
The Imprints Server
The Installation Client
Adding Network Printers without User Interaction
The addprinter Command
Migration of Classical Printing to Samba
Publishing Printer Information in Active Directory or LDAP
Common Errors
I Give My Root Password but I Do Not Get Access
My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost
19. CUPS Printing Support
Introduction
Features and Benefits
Overview
Basic CUPS Support Configuration
Linking smbd with libcups.so
Simple smb.conf Settings for CUPS
More Complex CUPS smb.conf Settings
Advanced Configuration
Central Spooling vs. Peer-to-Peer Printing
Raw Print Serving Vendor Drivers on Windows Clients
Installation of Windows Client Drivers
Explicitly Enable raw Printing for application/octet-stream
Driver Upload Methods
Advanced Intelligent Printing with PostScript Driver Download
GDI on Windows -- PostScript on UNIX
Windows Drivers, GDI and EMF
UNIX Printfile Conversion and GUI Basics
PostScript and Ghostscript
Ghostscript the Software RIP for Non-PostScript Printers
PostScript Printer Description (PPD) Specification
Using Windows-Formatted Vendor PPDs
CUPS Also Uses PPDs for Non-PostScript Printers
The CUPS Filtering Architecture
MIME Types and CUPS Filters
MIME Type Conversion Rules
Filtering Overview
Prefilters
pstops
pstoraster
imagetops and imagetoraster
rasterto [printers specific]
CUPS Backends
The Role of cupsomatic/foomatic
The Complete Picture
mime.convs
Raw Printing
application/octet-stream Printing
PostScript Printer Descriptions (PPDs) for Non-PS Printers
cupsomatic/foomatic-rip Versus native CUPS Printing
Examples for Filtering Chains
Sources of CUPS Drivers/PPDs
Printing with Interface Scripts
Network Printing (Purely Windows)
From Windows Clients to an NT Print Server
Driver Execution on the Client
Driver Execution on the Server
Network Printing (Windows Clients UNIX/Samba Print Servers)
From Windows Clients to a CUPS/Samba Print Server
Samba Receiving Jobfiles and Passing Them to CUPS
Network PostScript RIP
PPDs for Non-PS Printers on UNIX
PPDs for Non-PS Printers on Windows
Windows Terminal Servers (WTS) as CUPS Clients
Printer Drivers Running in Kernel Mode Cause Many Problems
Workarounds Impose Heavy Limitations
CUPS: A Magical Stone?
PostScript Drivers with No Major Problems Even in Kernel Mode
Configuring CUPS for Driver Download
cupsaddsmb: The Unknown Utility
Prepare Your smb.conf for cupsaddsmb
CUPS PostScript Driver for Windows NT/200x/XP
Recognizing Different Driver Files
Acquiring the Adobe Driver Files
ESP Print Pro PostScript Driver for Windows NT/200x/XP
Caveats to be Considered
Windows CUPS PostScript Driver Versus Adobe Driver
Run cupsaddsmb (Quiet Mode)
Run cupsaddsmb with Verbose Output
Understanding cupsaddsmb
How to Recognize If cupsaddsmb Completed Successfully
cupsaddsmb with a Samba PDC
cupsaddsmb Flowchart
Installing the PostScript Driver on a Client
Avoiding Critical PostScript Driver Settings on the Client
Installing PostScript Driver Files Manually Using rpcclient
A Check of the rpcclient man Page
Understanding the rpcclient man Page
Producing an Example by Querying a Windows Box
Requirements for adddriver and setdriver to Succeed
Manual Driver Installation in 15 Steps
Troubleshooting Revisited
The Printing *.tdb Files
Trivial Database Files
Binary Format
Losing *.tdb Files
Using tdbbackup
CUPS Print Drivers from Linuxprinting.org
foomatic-rip and Foomatic Explained
foomatic-rip and Foomatic-PPD Download and Installation
Page Accounting with CUPS
Setting Up Quotas
Correct and Incorrect Accounting
Adobe and CUPS PostScript Drivers for Windows Clients
The page_log File Syntax
Possible Shortcomings
Future Developments
Additional Material
Auto-Deletion or Preservation of CUPS Spool Files
CUPS Configuration Settings Explained
Pre-Conditions
Manual Configuration
Printing from CUPS to Windows Attached Printers
More CUPS-Filtering Chains
Common Errors
Windows 9x/ME Client Can't Install Driver
cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
cupsaddsmb Errors
Client Can't Connect to Samba Printer
New Account Reconnection from Windows 200x/XP Troubles
Avoid Being Connected to the Samba Server as the Wrong User
Upgrading to CUPS Drivers from Adobe Drivers
Can't Use cupsaddsmb on Samba Server Which Is a PDC
Deleted Windows 200x Printer Driver Is Still Shown
Windows 200x/XP "Local Security Policies"
Administrator Cannot Install Printers for All Local Users
Print Change Notify Functions on NT-clients
WinXP-SP1
Print Options for All Users Can't Be Set on Windows 200x/XP
Most Common Blunders in Driver Settings on Windows Clients
cupsaddsmb Does Not Work with Newly Installed Printer
Permissions on /var/spool/samba/ Get Reset After Each Reboot
Print Queue Called lp Mis-handles Print Jobs
Location of Adobe PostScript Driver Files for cupsaddsmb
Overview of the CUPS Printing Processes
20. Stackable VFS modules
Features and Benefits
Discussion
Included Modules
audit
extd_audit
fake_perms
recycle
netatalk
VFS Modules Available Elsewhere
DatabaseFS
vscan
21. Winbind: Use of Domain Accounts
Features and Benefits
Introduction
What Winbind Provides
Target Uses
How Winbind Works
Microsoft Remote Procedure Calls
Microsoft Active Directory Services
Name Service Switch
Pluggable Authentication Modules
User and Group ID Allocation
Result Caching
Installation and Configuration
Introduction
Requirements
Testing Things Out
Conclusion
Common Errors
NSCD Problem Warning
Winbind Is Not Resolving Users and Groups
22. Advanced Network Management
Features and Benefits
Remote Server Administration
Remote Desktop Management
Remote Management from NoMachine.Com
Network Logon Script Magic
Adding Printers without User Intervention
23. System and Account Policies
Features and Benefits
Creating and Managing System Policies
Windows 9x/ME Policies
Windows NT4-Style Policy Files
MS Windows 200x/XP Professional Policies
Managing Account/User Policies
Management Tools
Samba Editreg Toolset
Windows NT4/200x
Samba PDC
System Startup and Logon Processing Overview
Common Errors
Policy Does Not Work
24. Desktop Profile Management
Features and Benefits
Roaming Profiles
Samba Configuration for Profile Handling
Windows Client Profile Configuration Information
Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
Profile Migration from Windows NT4/200x Server to Samba
Mandatory Profiles
Creating and Managing Group Profiles
Default Profile for Windows Users
MS Windows 9x/Me
MS Windows NT4 Workstation
MS Windows 200x/XP
Common Errors
Configuring Roaming Profiles for a Few Users or Groups
Cannot Use Roaming Profiles
Changing the Default Profile
25. PAM-Based Distributed Authentication
Features and Benefits
Technical Discussion
PAM Configuration Syntax
Example System Configurations
smb.conf PAM Configuration
Remote CIFS Authentication Using winbindd.so
Password Synchronization Using pam_smbpass.so
Common Errors
pam_winbind Problem
Winbind Is Not Resolving Users and Groups
26. Integrating MS Windows Networks with Samba
Features and Benefits
Background Information
Name Resolution in a Pure UNIX/Linux World
/etc/hosts
/etc/resolv.conf
/etc/host.conf
/etc/nsswitch.conf
Name Resolution as Used within MS Windows Networking
The NetBIOS Name Cache
The LMHOSTS File
HOSTS File
DNS Lookup
WINS Lookup
Common Errors
Pinging Works Only in One Way
Very Slow Network Connections
Samba Server Name Change Problem
27. Unicode/Charsets
Features and Benefits
What Are Charsets and Unicode?
Samba and Charsets
Conversion from Old Names
Japanese Charsets
Common Errors
CP850.so Can't Be Found
28. Samba Backup Techniques
Note
Features and Benefits
29. High Availability Options
Note

Chapter 10. Network Browsing

John H. Terpstra

Samba Team

Jelmer R. Vernooij

The Samba Team

July 5, 1998

Updated: April 21, 2003

This document contains detailed information as well as a fast track guide to implementing browsing across subnets and/or across workgroups (or domains). WINS is the best tool for resolution of NetBIOS names to IP addresses. WINS is not involved in browse list handling except by way of name to address resolution.

Note

MS Windows 2000 and later versions can be configured to operate with no NetBIOS over TCP/IP. Samba-3 and later versions also support this mode of operation. When the use of NetBIOS over TCP/IP has been disabled, the primary means for resolution of MS Windows machine names is via DNS and Active Directory. The following information assumes that your site is running NetBIOS over TCP/IP.

Features and Benefits

Someone once referred to the past in these words “It was the best of times, it was the worst of times.” The more we look back, the more we long for what was and hope it never returns.

For many MS Windows network administrators, that statement sums up their feelings about NetBIOS networking precisely. For those who mastered NetBIOS networking, its fickle nature was just par for the course. For those who never quite managed to tame its lusty features, NetBIOS is like Paterson's Curse.

For those not familiar with botanical problems in Australia, Paterson's Curse, Echium plantagineum, was introduced to Australia from Europe during the mid-nineteenth century. Since then it has spread rapidly. The high seed production, with densities of thousands of seeds per square meter, a seed longevity of more than seven years, and an ability to germinate at any time of year, given the right conditions, are some of the features which make it such a persistent weed.

In this chapter we explore vital aspects of Server Message Block (SMB) networking with a particular focus on SMB as implemented through running NetBIOS (Network Basic Input/Output System) over TCP/IP. Since Samba does not implement SMB or NetBIOS over any other protocols, we need to know how to configure our network environment and simply remember to use nothing but TCP/IP on all our MS Windows network clients.

Samba provides the ability to implement a WINS (Windows Internetworking Name Server) and implements extensions to Microsoft's implementation of WINS. These extensions help Samba to effect stable WINS operations beyond the normal scope of MS WINS.

WINS is exclusively a service that applies only to those systems that run NetBIOS over TCP/IP. MS Windows 200x/XP have the capacity to operate with support for NetBIOS disabled, in which case WINS is of no relevance. Samba supports this also.

For those networks on which NetBIOS has been disabled (i.e., WINS is not required) the use of DNS is necessary for host name resolution.

What Is Browsing?

To most people browsing means they can see the MS Windows and Samba servers in the Network Neighborhood, and when the computer icon for a particular server is clicked, it opens up and shows the shares and printers available on the target server.

What seems so simple is in fact a complex interaction of different technologies. The technologies (or methods) employed in making all of this work include:

  • MS Windows machines register their presence to the network.
  • Machines announce themselves to other machines on the network.
  • One or more machine on the network collates the local announcements.
  • The client machine finds the machine that has the collated list of machines.
  • The client machine is able to resolve the machine names to IP addresses.
  • The client machine is able to connect to a target machine.

The Samba application that controls browse list management and name resolution is called nmbd. The configuration parameters involved in nmbd's operation are:

Browsing options: os level(*), lm announce, lm interval, preferred master(*), local master(*), domain master(*), browse list, enhanced browsing.

Name Resolution Method: name resolve order(*).

WINS options: dns proxy, wins proxy, wins server(*), wins support(*), wins hook.

For Samba, the WINS Server and WINS Support are mutually exclusive options. Those marked with an (*) are the only options that commonly may need to be modified. Even if none of these parameters is set, nmbd will still do its job.

Discussion

All MS Windows networking uses SMB-based messaging. SMB messaging may be implemented with or without NetBIOS. MS Windows 200x supports NetBIOS over TCP/IP for backwards compatibility. Microsoft appears intent on phasing out NetBIOS support.

NetBIOS over TCP/IP

Samba implements NetBIOS, as does MS Windows NT/200x/XP, by encapsulating it over TCP/IP. MS Windows products can do likewise. NetBIOS-based networking uses broadcast messaging to effect browse list management. When running NetBIOS over TCP/IP, this uses UDP-based messaging. UDP messages can be broadcast or unicast.

Normally, only unicast UDP messaging can be forwarded by routers. The remote announce parameter to smb.conf helps to project browse announcements to remote network segments via unicast UDP. Similarly, the remote browse sync parameter of smb.conf implements browse list collation using unicast UDP.

Secondly, in those networks where Samba is the only SMB server technology, wherever possible nmbd should be configured on one machine as the WINS server. This makes it easy to manage the browsing environment. If each network segment is configured with its own Samba WINS server, then the only way to get cross-segment browsing to work is by using the remote announce and the remote browse sync parameters to your smb.conf file.

If only one WINS server is used for an entire multi-segment network, then the use of the remote announce and the remote browse sync parameters should not be necessary.

As of Samba-3 WINS replication is being worked on. The bulk of the code has been committed, but it still needs maturation. This is not a supported feature of the Samba-3.0.0 release. Hopefully, this will become a supported feature of one of the Samba-3 release series.

Right now Samba WINS does not support MS-WINS replication. This means that when setting up Samba as a WINS server, there must only be one nmbd configured as a WINS server on the network. Some sites have used multiple Samba WINS servers for redundancy (one server per subnet) and then used remote browse sync and remote announce to effect browse list collation across all segments. Note that this means clients will only resolve local names, and must be configured to use DNS to resolve names on other subnets in order to resolve the IP addresses of the servers they can see on other subnets. This setup is not recommended, but is mentioned as a practical consideration (i.e., an “if all else fails” scenario).

Lastly, take note that browse lists are a collection of unreliable broadcast messages that are repeated at intervals of not more than 15 minutes. This means that it will take time to establish a browse list and it can take up to 45 minutes to stabilize, particularly across network segments.

TCP/IP without NetBIOS

All TCP/IP-enabled systems use various forms of host name resolution. The primary methods for TCP/IP hostname resolution involve either a static file (/etc/hosts) or the Domain Name System (DNS). DNS is the technology that makes the Internet usable. DNS-based host name resolution is supported by nearly all TCP/IP-enabled systems. Only a few embedded TCP/IP systems do not support DNS.

When an MS Windows 200x/XP system attempts to resolve a host name to an IP address it follows a defined path:

  1. Checks the hosts file. It is located in C:\Windows NT\System32\Drivers\etc.

  2. Does a DNS lookup.

  3. Checks the NetBIOS name cache.

  4. Queries the WINS server.

  5. Does a broadcast name lookup over UDP.

  6. Looks up entries in LMHOSTS. It is located in C:\Windows NT\System32\Drivers\etc.

Windows 200x/XP can register its host name with a Dynamic DNS server. You can force register with a Dynamic DNS server in Windows 200x/XP using: ipconfig /registerdns.

With Active Directory (ADS), a correctly functioning DNS server is absolutely essential. In the absence of a working DNS server that has been correctly configured, MS Windows clients and servers will be unable to locate each other, so consequently network services will be severely impaired.

The use of Dynamic DNS is highly recommended with Active Directory, in which case the use of BIND9 is preferred for its ability to adequately support the SRV (service) records that are needed for Active Directory.

DNS and Active Directory

Occasionally we hear from UNIX network administrators who want to use a UNIX-based Dynamic DNS server in place of the Microsoft DNS server. While this might be desirable to some, the MS Windows 200x DNS server is auto-configured to work with Active Directory. It is possible to use BIND version 8 or 9, but it will almost certainly be necessary to create service records so MS Active Directory clients can resolve host names to locate essential network services. The following are some of the default service records that Active Directory requires:

_ldap._tcp.pdc.ms-dcs.Domain

This provides the address of the Windows NT PDC for the Domain.

_ldap._tcp.pdc.ms-dcs.DomainTree

Resolves the addresses of Global Catalog servers in the domain.

_ldap._tcp.site.sites.writable.ms-dcs.Domain

Provides list of Domain Controllers based on sites.

_ldap._tcp.writable.ms-dcs.Domain

Enumerates list of Domain Controllers that have the writable copies of the Active Directory datastore.

_ldap._tcp.GUID.domains.ms-dcs.DomainTree

Entry used by MS Windows clients to locate machines using the Global Unique Identifier.

_ldap._tcp.Site.gc.ms-dcs.DomainTree

Used by MS Windows clients to locate site configuration dependent Global Catalog server.

How Browsing Functions

MS Windows machines register their NetBIOS names (i.e., the machine name for each service type in operation) on start-up. The exact method by which this name registration takes place is determined by whether or not the MS Windows client/server has been given a WINS server address, whether or not LMHOSTS lookup is enabled, or if DNS for NetBIOS name resolution is enabled, etc.

In the case where there is no WINS server, all name registrations as well as name lookups are done by UDP broadcast. This isolates name resolution to the local subnet, unless LMHOSTS is used to list all names and IP addresses. In such situations, Samba provides a means by which the Samba server name may be forcibly injected into the browse list of a remote MS Windows network (using the remote announce parameter).

Where a WINS server is used, the MS Windows client will use UDP unicast to register with the WINS server. Such packets can be routed and thus WINS allows name resolution to function across routed networks.

During the startup process an election will take place to create a Local Master Browser if one does not already exist. On each NetBIOS network one machine will be elected to function as the Domain Master Browser. This domain browsing has nothing to do with MS security Domain Control. Instead, the Domain Master Browser serves the role of contacting each local master browser (found by asking WINS or from LMHOSTS) and exchanging browse list contents. This way every master browser will eventually obtain a complete list of all machines that are on the network. Every 11 to 15 minutes an election is held to determine which machine will be the master browser. By the nature of the election criteria used, the machine with the highest uptime, or the most senior protocol version or other criteria, will win the election as Domain Master Browser.

Clients wishing to browse the network make use of this list, but also depend on the availability of correct name resolution to the respective IP address/addresses.

Any configuration that breaks name resolution and/or browsing intrinsics will annoy users because they will have to put up with protracted inability to use the network services.

Samba supports a feature that allows forced synchronization of browse lists across routed networks using the remote browse sync parameter in the smb.conf file. This causes Samba to contact the local master browser on a remote network and to request browse list synchronization. This effectively bridges two networks that are separated by routers. The two remote networks may use either broadcast-based name resolution or WINS-based name resolution, but it should be noted that the remote browse sync parameter provides browse list synchronization and that is distinct from name to address resolution. In other words, for cross-subnet browsing to function correctly it is essential that a name-to-address resolution mechanism be provided. This mechanism could be via DNS, /etc/hosts, and so on.

Configuring WORKGROUP Browsing

To configure cross-subnet browsing on a network containing machines in a WORKGROUP, not an NT Domain, you need to set up one Samba server to be the Domain Master Browser (note that this is not the same as a Primary Domain Controller, although in an NT Domain the same machine plays both roles). The role of a Domain Master Browser is to collate the browse lists from Local Master Browsers on all the subnets that have a machine participating in the workgroup. Without one machine configured as a Domain Master Browser, each subnet would be an isolated workgroup unable to see any machines on another subnet. It is the presence of a Domain Master Browser that makes cross-subnet browsing possible for a workgroup.

In a WORKGROUP environment the Domain Master Browser must be a Samba server, and there must only be one Domain Master Browser per workgroup name. To set up a Samba server as a Domain Master Browser, set the following option in the [global] section of the smb.conf file:

domain master = yes

The Domain Master Browser should preferably be the local master browser for its own subnet. In order to achieve this, set the following options in the [global] section of the smb.conf file as shown in .

Example 10.1. Domain Master Browser smb.conf

[global]
domain master = yes
local master = yes
preferred master = yes
os level = 65

The Domain Master Browser may be the same machine as the WINS server, if necessary.

Next, you should ensure that each of the subnets contains a machine that can act as a Local Master Browser for the workgroup. Any MS Windows NT/200x/XP machine should be able to do this, as will Windows 9x/Me machines (although these tend to get rebooted more often, so it is not such a good idea to use these). To make a Samba server a Local Master Browser set the following options in the [global] section of the smb.conf file as shown in :

Example 10.2. Local master browser smb.conf

[global]
domain master = no
local master = yes
preferred master = yes
os level = 65

Do not do this for more than one Samba server on each subnet, or they will war with each other over which is to be the Local Master Browser.

The local master parameter allows Samba to act as a Local Master Browser. The preferred master causes nmbd to force a browser election on startup and the os level parameter sets Samba high enough so it should win any browser elections.

If you have an NT machine on the subnet that you wish to be the Local Master Browser, you can disable Samba from becoming a Local Master Browser by setting the following options in the [global] section of the smb.conf file as shown in :

Example 10.3. smb.conf for not being a Master Browser

[global]
domain master = no
local master = no
preferred master = no
os level = 0

DOMAIN Browsing Configuration

If you are adding Samba servers to a Windows NT Domain, then you must not set up a Samba server as a Domain Master Browser. By default, a Windows NT Primary Domain Controller for a domain is also the Domain Master Browser for that domain. Network browsing may break if a Samba server registers the domain master browser NetBIOS name (DOMAIN<1B>) with WINS instead of the PDC.

For subnets other than the one containing the Windows NT PDC, you may set up Samba servers as Local Master Browsers as described. To make a Samba server a Local Master Browser, set the following options in the [global] section of the smb.conf file as shown in :

Example 10.4. Local Master Browser smb.conf

[global]
domain master = no
local master = yes
preferred master = yes
os level = 65

If you wish to have a Samba server fight the election with machines on the same subnet you may set the os level parameter to lower levels. By doing this you can tune the order of machines that will become Local Master Browsers if they are running. For more details on this refer to .

If you have Windows NT machines that are members of the domain on all subnets and you are sure they will always be running, you can disable Samba from taking part in browser elections and ever becoming a Local Master Browser by setting the following options in the [global] section of the smb.conf file as shown in :

Example 10.5. smb.conf for not being a master browser

[global]
domain master = no
local master = no
preferred master = no
os level = 0

Forcing Samba to Be the Master

Who becomes the master browser is determined by an election process using broadcasts. Each election packet contains a number of parameters that determine what precedence (bias) a host should have in the election. By default Samba uses a low precedence and thus loses elections to just about every Windows network server or client.

If you want Samba to win elections, set the os level global option in smb.conf to a higher number. It defaults to zero. Using 34 would make it win all elections every other system (except other samba systems).

An os level of two would make it beat Windows for Workgroups and Windows 9x/Me, but not MS Windows NT/200x Server. An MS Windows NT/200x Server Domain Controller uses level 32. The maximum os level is 255.

If you want Samba to force an election on startup, set the preferred master global option in smb.conf to yes. Samba will then have a slight advantage over other potential master browsers that are not Perferred Master Browsers. Use this parameter with care, as if you have two hosts (whether they are Windows 9x/Me or NT/200x/XP or Samba) on the same local subnet both set with preferred master to yes, then periodically and continually they will force an election in order to become the Local Master Browser.

If you want Samba to be a Domain Master Browser, then it is recommended that you also set preferred master to yes, because Samba will not become a Domain Master Browser for the whole of your LAN or WAN if it is not also a Local Master Browser on its own broadcast isolated subnet.

It is possible to configure two Samba servers to attempt to become the Domain Master Browser for a domain. The first server that comes up will be the Domain Master Browser. All other Samba servers will attempt to become the Domain Master Browser every five minutes. They will find that another Samba server is already the domain master browser and will fail. This provides automatic redundancy, should the current Domain Master Browser fail.

Making Samba the Domain Master

The domain master is responsible for collating the browse lists of multiple subnets so browsing can occur between subnets. You can make Samba act as the Domain Master by setting domain master = yes in smb.conf. By default it will not be a Domain Master.

Do not set Samba to be the Domain Master for a workgroup that has the same name as an NT/200x Domain. If Samba is configured to be the Domain Master for a workgroup that is present on the same network as a Windows NT/200x domain that has the same name, network browsing problems will certainly be experienced.

When Samba is the Domain Master and the Master Browser, it will listen for master announcements (made roughly every twelve minutes) from Local Master Browsers on other subnets and then contact them to synchronize browse lists.

If you want Samba to be the domain master, you should also set the os level high enough to make sure it wins elections, and set preferred master to yes, to get Samba to force an election on startup.

All servers (including Samba) and clients should be using a WINS server to resolve NetBIOS names. If your clients are only using broadcasting to resolve NetBIOS names, then two things will occur:

  1. Local Master Browsers will be unable to find a Domain Master Browser, as they will be looking only on the local subnet.

  2. If a client happens to get hold of a domain-wide browse list and a user attempts to access a host in that list, it will be unable to resolve the NetBIOS name of that host.

If, however, both Samba and your clients are using a WINS server, then:

  1. Local master browsers will contact the WINS server and, as long as Samba has registered that it is a Domain Master Browser with the WINS server, the Local Master Browser will receive Samba's IP address as its Domain Master Browser.

  2. When a client receives a domain-wide browse list and a user attempts to access a host in that list, it will contact the WINS server to resolve the NetBIOS name of that host. As long as that host has registered its NetBIOS name with the same WINS server, the user will be able to see that host.

Note about Broadcast Addresses

If your network uses a 0 based broadcast address (for example, if it ends in a 0) then you will strike problems. Windows for Workgroups does not seem to support a zeros broadcast and you will probably find that browsing and name lookups will not work.

Multiple Interfaces

Samba supports machines with multiple network interfaces. If you have multiple interfaces, you will need to use the interfaces option in smb.conf to configure them.

Use of the Remote Announce Parameter

The remote announce parameter of smb.conf can be used to forcibly ensure that all the NetBIOS names on a network get announced to a remote network. The syntax of the remote announce parameter is:

remote announce = a.b.c.d [e.f.g.h] ...

or

remote announce = a.b.c.d/WORKGROUP [e.f.g.h/WORKGROUP] ...

where:

a.b.c.d and e.f.g.h

is either the LMB (Local Master Browser) IP address or the broadcast address of the remote network. i.e., the LMB is at 192.168.1.10, or the address could be given as 192.168.1.255 where the netmask is assumed to be 24 bits (255.255.255.0). When the remote announcement is made to the broadcast address of the remote network, every host will receive our announcements. This is noisy and therefore undesirable but may be necessary if we do not know the IP address of the remote LMB.

WORKGROUP

is optional and can be either our own workgroup or that of the remote network. If you use the workgroup name of the remote network, our NetBIOS machine names will end up looking like they belong to that workgroup. This may cause name resolution problems and should be avoided.

Use of the Remote Browse Sync Parameter

The remote browse sync parameter of smb.conf is used to announce to another LMB that it must synchronize its NetBIOS name list with our Samba LMB. This works only if the Samba server that has this option is simultaneously the LMB on its network segment.

The syntax of the remote browse sync parameter is:

remote browse sync = a.b.c.d

where a.b.c.d is either the IP address of the remote LMB or else is the network broadcast address of the remote segment.

WINS The Windows Internetworking Name Server

Use of WINS (either Samba WINS or MS Windows NT Server WINS) is highly recommended. Every NetBIOS machine registers its name together with a name_type value for each of several types of service it has available. It registers its name directly as a unique (the type 0x03) name. It also registers its name if it is running the LanManager compatible server service (used to make shares and printers available to other users) by registering the server (the type 0x20) name.

All NetBIOS names are up to 15 characters in length. The name_type variable is added to the end of the name, thus creating a 16 character name. Any name that is shorter than 15 characters is padded with spaces to the 15th character. Thus, all NetBIOS names are 16 characters long (including the name_type information).

WINS can store these 16-character names as they get registered. A client that wants to log onto the network can ask the WINS server for a list of all names that have registered the NetLogon service name_type. This saves broadcast traffic and greatly expedites logon processing. Since broadcast name resolution cannot be used across network segments this type of information can only be provided via WINS or via a statically configured lmhosts file that must reside on all clients in the absence of WINS.

WINS also serves the purpose of forcing browse list synchronization by all LMBs. LMBs must synchronize their browse list with the DMB (Domain Master Browser) and WINS helps the LMB to identify its DMB. By definition this will work only within a single workgroup. Note that the Domain Master Browser has nothing to do with what is referred to as an MS Windows NT Domain. The later is a reference to a security environment while the DMB refers to the master controller for browse list information only.

WINS will work correctly only if every client TCP/IP protocol stack has been configured to use the WINS servers. Any client that has not been configured to use the WINS server will continue to use only broadcast-based name registration so WINS may never get to know about it. In any case, machines that have not registered with a WINS server will fail name to address lookup attempts by other clients and will therefore cause workstation access errors.

To configure Samba as a WINS server just add wins support = yes to the smb.conf file [global] section.

To configure Samba to register with a WINS server just add wins server = a.b.c.d to your smb.conf file [global] section.

Important

Never use both wins support = yes together with wins server = a.b.c.d particularly not using its own IP address. Specifying both will cause nmbd to refuse to start!

WINS Server Configuration

Either a Samba Server or a Windows NT Server machine may be set up as a WINS server. To configure a Samba Server to be a WINS server you must add to the smb.conf file on the selected Server the following line to the [global] section:

wins support = yes

Versions of Samba prior to 1.9.17 had this parameter default to yes. If you have any older versions of Samba on your network it is strongly suggested you upgrade to a recent version, or at the very least set the parameter to “no” on all these machines.

Machines configured with wins support = yes will keep a list of all NetBIOS names registered with them, acting as a DNS for NetBIOS names.

It is strongly recommended to set up only one WINS server. Do not set the wins support = yes option on more than one Samba server.

To configure Windows NT/200x Server as a WINS server, install and configure the WINS service. See the Windows NT/200x documentation for details. Windows NT/200x WINS servers can replicate to each other, allowing more than one to be set up in a complex subnet environment. As Microsoft refuses to document the replication protocols, Samba cannot currently participate in these replications. It is possible in the future that a Samba-to-Samba WINS replication protocol may be defined, in which case more than one Samba machine could be set up as a WINS server. Currently only one Samba server should have the wins support = yes parameter set.

After the WINS server has been configured, you must ensure that all machines participating on the network are configured with the address of this WINS server. If your WINS server is a Samba machine, fill in the Samba machine IP address in the Primary WINS Server field of the Control Panel->Network->Protocols->TCP->WINS Server dialogs in Windows 9x/Me or Windows NT/200x. To tell a Samba server the IP address of the WINS server, add the following line to the [global] section of all smb.conf files:

wins server = <name or IP address>

where <name or IP address> is either the DNS name of the WINS server machine or its IP address.

This line must not be set in the smb.conf file of the Samba server acting as the WINS server itself. If you set both the wins support = yes option and the wins server = <name> option then nmbd will fail to start.

There are two possible scenarios for setting up cross-subnet browsing. The first details setting up cross-subnet browsing on a network containing Windows 9x/Me, Samba and Windows NT/200x machines that are not configured as part of a Windows NT Domain. The second details setting up cross-subnet browsing on networks that contain NT Domains.

WINS Replication

Samba-3 permits WINS replication through the use of the wrepld utility. This tool is not currently capable of being used as it is still in active development. As soon as this tool becomes moderately functional, we will prepare man pages and enhance this section of the documentation to provide usage and technical details.

Static WINS Entries

Adding static entries to your Samba WINS server is actually fairly easy. All you have to do is add a line to wins.dat, typically located in /usr/local/samba/var/locks.

Entries in wins.dat take the form of:

"NAME#TYPE" TTL ADDRESS+ FLAGS

where NAME is the NetBIOS name, TYPE is the NetBIOS type, TTL is the time-to-live as an absolute time in seconds, ADDRESS+ is one or more addresses corresponding to the registration and FLAGS are the NetBIOS flags for the registration.

A typical dynamic entry looks like this:

"MADMAN#03" 1055298378 192.168.1.2 66R

To make it static, all that has to be done is set the TTL to 0, like this:

"MADMAN#03" 0 192.168.1.2 66R

Though this method works with early Samba-3 versions, there is a possibility that it may change in future versions if WINS replication is added.

Helpful Hints

The following hints should be carefully considered as they are stumbling points for many new network administrators.

Windows Networking Protocols

Warning

Do not use more than one protocol on MS Windows machines.

A common cause of browsing problems results from installing more than one protocol on an MS Windows machine.

Every NetBIOS machine takes part in a process of electing the LMB (and DMB) every 15 minutes. A set of election criteria is used to determine the order of precedence for winning this election process. A machine running Samba or Windows NT will be biased so the most suitable machine will predictably win and thus retain its role.

The election process is “fought out” so to speak over every NetBIOS network interface. In the case of a Windows 9x/Me machine that has both TCP/IP and IPX installed and has NetBIOS enabled over both protocols, the election will be decided over both protocols. As often happens, if the Windows 9x/Me machine is the only one with both protocols then the LMB may be won on the NetBIOS interface over the IPX protocol. Samba will then lose the LMB role as Windows 9x/Me will insist it knows who the LMB is. Samba will then cease to function as an LMB and thus browse list operation on all TCP/IP-only machines will fail.

Windows 95, 98, 98se, and Me are referred to generically as Windows 9x/Me. The Windows NT4, 200x, and XP use common protocols. These are roughly referred to as the Windows NT family, but it should be recognized that 2000 and XP/2003 introduce new protocol extensions that cause them to behave differently from MS Windows NT4. Generally, where a server does not support the newer or extended protocol, these will fall back to the NT4 protocols.

The safest rule of all to follow is: use only one protocol!

Name Resolution Order

Resolution of NetBIOS names to IP addresses can take place using a number of methods. The only ones that can provide NetBIOS name_type information are:

  • WINS the best tool.
  • LMHOSTS static and hard to maintain.
  • Broadcast uses UDP and cannot resolve names across remote segments.

Alternative means of name resolution include:

  • Static /etc/hosts hard to maintain, and lacks name_type info.
  • DNS is a good choice but lacks essential name_type info.

Many sites want to restrict DNS lookups and avoid broadcast name resolution traffic. The name resolve order parameter is of great help here. The syntax of the name resolve order parameter is:

name resolve order = wins lmhosts bcast host

or

name resolve order = wins lmhosts (eliminates bcast and host)

The default is:

name resolve order = host lmhost wins bcast

where “host” refers to the native methods used by the UNIX system to implement the gethostbyname() function call. This is normally controlled by /etc/host.conf, /etc/nsswitch.conf and /etc/resolv.conf.

Technical Overview of Browsing

SMB networking provides a mechanism by which clients can access a list of machines in a network, a so-called browse list. This list contains machines that are ready to offer file and/or print services to other machines within the network. Thus it does not include machines that aren't currently able to do server tasks. The browse list is heavily used by all SMB clients. Configuration of SMB browsing has been problematic for some Samba users, hence this document.

MS Windows 2000 and later versions, as with Samba-3 and later versions, can be configured to not use NetBIOS over TCP/IP. When configured this way, it is imperative that name resolution (using DNS/LDAP/ADS) be correctly configured and operative. Browsing will not work if name resolution from SMB machine names to IP addresses does not function correctly.

Where NetBIOS over TCP/IP is enabled, use of a WINS server is highly recommended to aid the resolution of NetBIOS (SMB) names to IP addresses. WINS allows remote segment clients to obtain NetBIOS name_type information that cannot be provided by any other means of name resolution.

Browsing Support in Samba

Samba facilitates browsing. The browsing is supported by nmbd and is also controlled by options in the smb.conf file. Samba can act as a local browse master for a workgroup and the ability to support domain logons and scripts is now available.

Samba can also act as a Domain Master Browser for a workgroup. This means that it will collate lists from Local Master Browsers into a wide area network server list. In order for browse clients to resolve the names they may find in this list, it is recommended that both Samba and your clients use a WINS server.

Do not set Samba to be the Domain Master for a workgroup that has the same name as an NT Domain. On each wide area network, you must only ever have one Domain Master Browser per workgroup, regardless of whether it is NT, Samba or any other type of domain master that is providing this service.

Note

nmbd can be configured as a WINS server, but it is not necessary to specifically use Samba as your WINS server. MS Windows NT4, Server or Advanced Server 200x can be configured as your WINS server. In a mixed NT/200x server and Samba environment on a Wide Area Network, it is recommended that you use the Microsoft WINS server capabilities. In a Samba-only environment, it is recommended that you use one and only one Samba server as the WINS server.

To get browsing to work you need to run nmbd as usual, but will need to use the workgroup option in smb.conf to control what workgroup Samba becomes a part of.

Samba also has a useful option for a Samba server to offer itself for browsing on another subnet. It is recommended that this option is only used for “unusual” purposes: announcements over the Internet, for example. See remote announce in the smb.conf man page.

Problem Resolution

If something does not work, the log.nmbd file will help to track down the problem. Try a log level of 2 or 3 for finding problems. Also note that the current browse list usually gets stored in text form in a file called browse.dat.

If it does not work, you should still be able to type the server name as \\SERVER in filemanager, then press enter and filemanager should display the list of available shares.

Some people find browsing fails because they do not have the global guest account set to a valid account. Remember that the IPC$ connection that lists the shares is done as guest and, thus, you must have a valid guest account.

MS Windows 2000 and later (as with Samba) can be configured to disallow anonymous (i.e., guest account) access to the IPC$ share. In that case, the MS Windows 2000/XP/2003 machine acting as an SMB/CIFS client will use the name of the currently logged-in user to query the IPC$ share. MS Windows 9x/Me clients are not able to do this and thus will not be able to browse server resources.

The other big problem people have is that their broadcast address, netmask or IP address is wrong (specified with the interfaces option in smb.conf)

Cross-Subnet Browsing

Since the release of Samba 1.9.17 (alpha1), Samba has supported the replication of browse lists across subnet boundaries. This section describes how to set this feature up in different settings.

To see browse lists that span TCP/IP subnets (i.e., networks separated by routers that do not pass broadcast traffic), you must set up at least one WINS server. The WINS server acts as a DNS for NetBIOS names. This will allow NetBIOS name-to-IP address translation to be completed by a direct query of the WINS server. This is done via a directed UDP packet on port 137 to the WINS server machine. The WINS server avoids the necessity of default NetBIOS name-to-IP address translation, which is done using UDP broadcasts from the querying machine. This means that machines on one subnet will not be able to resolve the names of machines on another subnet without using a WINS server.

Remember, for browsing across subnets to work correctly, all machines, be they Windows 95, Windows NT or Samba servers, must have the IP address of a WINS server given to them by a DHCP server, or by manual configuration (for Windows 9x/Me and Windows NT/200x/XP, this is in the TCP/IP Properties, under Network settings); for Samba, this is in the smb.conf file.

Behavior of Cross-Subnet Browsing

Cross-subnet Browsing is a complicated dance, containing multiple moving parts. It has taken Microsoft several years to get the code that achieves this correct, and Samba lags behind in some areas. Samba is capable of cross-subnet browsing when configured correctly.

Consider a network set up as .

Figure 10.1. Cross-Subnet Browsing Example.

Cross-Subnet Browsing Example.

This consists of 3 subnets (1, 2, 3) connected by two routers (R1, R2) which do not pass broadcasts. Subnet 1 has five machines on it, subnet 2 has four machines, subnet 3 has four machines. Assume for the moment that all machines are configured to be in the same workgroup (for simplicity's sake). Machine N1_C on subnet 1 is configured as Domain Master Browser (i.e., it will collate the browse lists for the workgroup). Machine N2_D is configured as WINS server and all the other machines are configured to register their NetBIOS names with it.

As these machines are booted up, elections for master browsers will take place on each of the three subnets. Assume that machine N1_C wins on subnet 1, N2_B wins on subnet 2, and N3_D wins on subnet 3. These machines are known as Local Master Browsers for their particular subnet. N1_C has an advantage in winning as the Local Master Browser on subnet 1 as it is set up as Domain Master Browser.

On each of the three networks, machines that are configured to offer sharing services will broadcast that they are offering these services. The Local Master Browser on each subnet will receive these broadcasts and keep a record of the fact that the machine is offering a service. This list of records is the basis of the browse list. For this case, assume that all the machines are configured to offer services, so all machines will be on the browse list.

For each network, the Local Master Browser on that network is considered “authoritative” for all the names it receives via local broadcast. This is because a machine seen by the Local Master Browser via a local broadcast must be on the same network as the Local Master Browser and thus is a “trusted” and “verifiable” resource. Machines on other networks that the Local Master Browsers learn about when collating their browse lists have not been directly seen. These records are called “non-authoritative.

At this point the browse lists appear as shown in (these are the machines you would see in your network neighborhood if you looked in it on a particular network right now).

Table 10.1. Browse Subnet Example 1

SubnetBrowse MasterList
Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E
Subnet2N2_BN2_A, N2_B, N2_C, N2_D
Subnet3N3_DN3_A, N3_B, N3_C, N3_D

At this point all the subnets are separate, and no machine is seen across any of the subnets.

Now examine subnet 2. As soon as N2_B has become the Local Master Browser it looks for a Domain Master Browser with which to synchronize its browse list. It does this by querying the WINS server (N2_D) for the IP address associated with the NetBIOS name WORKGROUP<1B>. This name was registered by the Domain Master Browser (N1_C) with the WINS server as soon as it was started.

Once N2_B knows the address of the Domain Master Browser, it tells it that is the Local Master Browser for subnet 2 by sending a MasterAnnouncement packet as a UDP port 138 packet. It then synchronizes with it by doing a NetServerEnum2 call. This tells the Domain Master Browser to send it all the server names it knows about. Once the Domain Master Browser receives the MasterAnnouncement packet, it schedules a synchronization request to the sender of that packet. After both synchronizations are complete the browse lists look as shown in :

Table 10.2. Browse Subnet Example 2

SubnetBrowse MasterList
Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*)
Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
Subnet3N3_DN3_A, N3_B, N3_C, N3_D

Servers with an (*) after them are non-authoritative names.

At this point users looking in their network neighborhood on subnets 1 or 2 will see all the servers on both, users on subnet 3 will still only see the servers on their own subnet.

The same sequence of events that occurred for N2_B now occurs for the Local Master Browser on subnet 3 (N3_D). When it synchronizes browse lists with the Domain Master Browser (N1_A) it gets both the server entries on subnet 1, and those on subnet 2. After N3_D has synchronized with N1_C and vica versa, the browse lists will appear as shown in .

Table 10.3. Browse Subnet Example 3

SubnetBrowse MasterList
Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

Servers with an (*) after them are non-authoritative names.

At this point, users looking in their network neighborhood on subnets 1 or 3 will see all the servers on all subnets, while users on subnet 2 will still only see the servers on subnets 1 and 2, but not 3.

Finally, the Local Master Browser for subnet 2 (N2_B) will sync again with the Domain Master Browser (N1_C) and will receive the missing server entries. Finally, as when a steady state (if no machines are removed or shut off) has been achieved, the browse lists will appear as shown in .

Table 10.4. Browse Subnet Example 4

SubnetBrowse MasterList
Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

Servers with an (*) after them are non-authoritative names.

Synchronizations between the Domain Master Browser and Local Master Browsers will continue to occur, but this should remain a steady state operation.

If either router R1 or R2 fails, the following will occur:

  1. Names of computers on each side of the inaccessible network fragments will be maintained for as long as 36 minutes in the network neighborhood lists.

  2. Attempts to connect to these inaccessible computers will fail, but the names will not be removed from the network neighborhood lists.

  3. If one of the fragments is cut off from the WINS server, it will only be able to access servers on its local subnet using subnet-isolated broadcast NetBIOS name resolution. The effects are similar to that of losing access to a DNS server.

Common Errors

Many questions are asked on the mailing lists regarding browsing. The majority of browsing problems originate from incorrect configuration of NetBIOS name resolution. Some are of particular note.

How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?

Samba's nmbd process controls all browse list handling. Under normal circumstances it is safe to restart nmbd. This will effectively flush the Samba NetBIOS name cache and cause it to be rebuilt. This does not make certain that a rogue machine name will not re-appear in the browse list. When nmbd is taken out of service, another machine on the network will become the Browse Master. This new list may still have the rogue entry in it. If you really want to clear a rogue machine from the list, every machine on the network will need to be shut down and restarted after all machines are down. Failing a complete restart, the only other thing you can do is wait until the entry times out and is then flushed from the list. This may take a long time on some networks (perhaps months).

Server Resources Can Not Be Listed

My Client Reports ‘This server is not configured to list shared resources

Your guest account is probably invalid for some reason. Samba uses the guest account for browsing in smbd. Check that your guest account is valid.

Also see guest account in the smb.conf man page.

I get an `Unable to browse the network' error

This error can have multiple causes:

  • There is no Local Master Browser. Configure nmbd or any other machine to serve as Local Master Browser.

  • You cannot log onto the machine that is the local master browser. Can you logon to it as a guest user?

  • There is no IP connectivity to the Local Master Browser. Can you reach it by broadcast?

Browsing of Shares and Directories is Very Slow

There are only two machines on a test network. One a Samba server, the other a Windows XP machine. Authentication and logons work perfectly, but when I try to explore shares on the Samba server, the Windows XP client becomes unrespsonsive. Sometimes it does not respond for some minutes. Eventually, Windows Explorer will respond and displays files and directories without problem. display file and directory.

But, the share is immediately available from a command shell (cmd, followed by exploration with dos command. Is this a Samba problem or is it a Windows problem? How can I solve this?

Here are a few possibilities:

Bad Networking Hardware

Most common defective hardware problems center around low cost or defective HUBs, routers, Network Interface Controllers (NICs) and bad wiring. If one piece of hardware is defective the whole network may suffer. Bad networking hardware can cause data corruption. Most bad networking hardware problems are accompanied by an increase in apparent network traffic, but not all.

The Windows XP WebClient

A number of sites have reported similar slow network browsing problems and found that when the WebClient service is turned off, the problem dissapears. This is certainly something that should be explored as it is a simple solution if it works.

Inconsistent WINS Configuration

This type of problem is common when one client is configured to use a WINS server (that is a TCP/IP configuration setting) and there is no WINS server on the network. Alternately, this will happen is there is a WINS server and Samba is not configured to use it. The use of WINS is highly recommended if the network is using NetBIOS over TCP/IP protocols. If use of NetBIOS over TCP/IP is disabled on all clients, Samba should not be configured as a WINS server neither should it be configured to use one.

Incorrect DNS Configuration

If use of NetBIOS over TCP/IP is disabled, Active Directory is in use and the DNS server has been incorrectly configured. Refer for more information.

Chapter 11. Account Information Databases

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Gerald (Jerry) Carter

Samba Team

Jeremy Allison

Samba Team

Guenther Deschner

LDAP updates

Olivier (lem) Lemaire

May 24, 2003

Samba-3 implements a new capability to work concurrently with multiple account backends. The possible new combinations of password backends allows Samba-3 a degree of flexibility and scalability that previously could be achieved only with MS Windows Active Directory. This chapter describes the new functionality and how to get the most out of it.

In the development of Samba-3, a number of requests were received to provide the ability to migrate MS Windows NT4 SAM accounts to Samba-3 without the need to provide matching UNIX/Linux accounts. We called this the Non-UNIX Accounts (NUA) capability. The intent was that an administrator could decide to use the tdbsam backend and by simply specifying passdb backend = tdbsam_nua, this would allow Samba-3 to implement a solution that did not use UNIX accounts per se. Late in the development cycle, the team doing this work hit upon some obstacles that prevents this solution from being used. Given the delays with the Samba-3 release, a decision was made to not deliver this functionality until a better method of recognizing NT Group SIDs from NT User SIDs could be found. This feature may return during the life cycle for the Samba-3 series.

Note

Samba-3 does not support Non-UNIX Account (NUA) operation for user accounts. Samba-3 does support NUA operation for machine accounts.

Features and Benefits

Samba-3 provides for complete backward compatibility with Samba-2.2.x functionality as follows:

Backward Compatibility Backends

Plain Text

This option uses nothing but the UNIX/Linux /etc/passwd style backend. On systems that have Pluggable Authentication Modules (PAM) support, all PAM modules are supported. The behavior is just as it was with Samba-2.2.x, and the protocol limitations imposed by MS Windows clients apply likewise. Please refer to for more information regarding the limitations of Plain Text password usage.

smbpasswd

This option allows continued use of the smbpasswd file that maintains a plain ASCII (text) layout that includes the MS Windows LanMan and NT encrypted passwords as well as a field that stores some account information. This form of password backend does not store any of the MS Windows NT/200x SAM (Security Account Manager) information required to provide the extended controls that are needed for more comprehensive interoperation with MS Windows NT4/200x servers.

This backend should be used only for backward compatibility with older versions of Samba. It may be deprecated in future releases.

ldapsam_compat (Samba-2.2 LDAP Compatibility)

There is a password backend option that allows continued operation with an existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. This option is provided primarily as a migration tool, although there is no reason to force migration at this time. This tool will eventually be deprecated.

Samba-3 introduces a number of new password backend capabilities.

New Backends

tdbsam

This backend provides a rich database backend for local servers. This backend is not suitable for multiple Domain Controllers (i.e., PDC + one or more BDC) installations.

The tdbsam password backend stores the old smbpasswd information plus the extended MS Windows NT / 200x SAM information into a binary format TDB (trivial database) file. The inclusion of the extended information makes it possible for Samba-3 to implement the same account and system access controls that are possible with MS Windows NT4/200x-based systems.

The inclusion of the tdbsam capability is a direct response to user requests to allow simple site operation without the overhead of the complexities of running OpenLDAP. It is recommended to use this only for sites that have fewer than 250 users. For larger sites or implementations, the use of OpenLDAP or of Active Directory integration is strongly recommended.

ldapsam

This provides a rich directory backend for distributed account installation.

Samba-3 has a new and extended LDAP implementation that requires configuration of OpenLDAP with a new format Samba schema. The new format schema file is included in the examples/LDAP directory of the Samba distribution.

The new LDAP implementation significantly expands the control abilities that were possible with prior versions of Samba. It is now possible to specify “per user” profile settings, home directories, account access controls, and much more. Corporate sites will see that the Samba Team has listened to their requests both for capability and to allow greater scalability.

mysqlsam (MySQL based backend)

It is expected that the MySQL-based SAM will be very popular in some corners. This database backend will be of considerable interest to sites that want to leverage existing MySQL technology.

xmlsam (XML based datafile)

Allows the account and password data to be stored in an XML format data file. This backend cannot be used for normal operation, it can only be used in conjunction with pdbedit's pdb2pdb functionality. The DTD that is used might be subject to changes in the future.

The xmlsam option can be useful for account migration between database backends or backups. Use of this tool will allow the data to be edited before migration into another backend format.

Technical Information

Old Windows clients send plain text passwords over the wire. Samba can check these passwords by encrypting them and comparing them to the hash stored in the UNIX user database.

Newer Windows clients send encrypted passwords (so-called Lanman and NT hashes) over the wire, instead of plain text passwords. The newest clients will send only encrypted passwords and refuse to send plain text passwords, unless their registry is tweaked.

These passwords can't be converted to UNIX-style encrypted passwords. Because of that, you can't use the standard UNIX user database, and you have to store the Lanman and NT hashes somewhere else.

In addition to differently encrypted passwords, Windows also stores certain data for each user that is not stored in a UNIX user database. For example, workstations the user may logon from, the location where the user's profile is stored, and so on. Samba retrieves and stores this information using a passdb backend. Commonly available backends are LDAP, plain text file, and MySQL. For more information, see the man page for smb.conf regarding the passdb backend parameter.

Figure 11.1. IDMAP: Resolution of SIDs to UIDs.

IDMAP: Resolution of SIDs to UIDs.

The resolution of SIDs to UIDs is fundamental to correct operation of Samba. In both cases shown, if winbindd is not running, or cannot be contacted, then only local SID/UID resolution is possible. See and .

Figure 11.2. IDMAP: Resolution of UIDs to SIDs.

IDMAP: Resolution of UIDs to SIDs.

Important Notes About Security

The UNIX and SMB password encryption techniques seem similar on the surface. This similarity is, however, only skin deep. The UNIX scheme typically sends cleartext passwords over the network when logging in. This is bad. The SMB encryption scheme never sends the cleartext password over the network but it does store the 16 byte hashed values on disk. This is also bad. Why? Because the 16 byte hashed values are a “password equivalent.” You cannot derive the user's password from them, but they could potentially be used in a modified client to gain access to a server. This would require considerable technical knowledge on behalf of the attacker but is perfectly possible. You should thus treat the datastored in whatever passdb backend you use (smbpasswd file, LDAP, MYSQL) as though it contained the cleartext passwords of all your users. Its contents must be kept secret and the file should be protected accordingly.

Ideally, we would like a password scheme that involves neither plain text passwords on the network nor on disk. Unfortunately, this is not available as Samba is stuck with having to be compatible with other SMB systems (Windows NT, Windows for Workgroups, Windows 9x/Me).

Windows NT 4.0 Service Pack 3 changed the default setting so plaintext passwords are disabled from being sent over the wire. This mandates either the use of encrypted password support or editing the Windows NT registry to re-enable plaintext passwords.

The following versions of Microsoft Windows do not support full domain security protocols, although they may log onto a domain environment:

  • MS DOS Network client 3.0 with the basic network redirector installed.
  • Windows 95 with the network redirector update installed.
  • Windows 98 [Second Edition].
  • Windows Me.

Note

MS Windows XP Home does not have facilities to become a Domain Member and it cannot participate in domain logons.

The following versions of MS Windows fully support domain security protocols.

  • Windows NT 3.5x.
  • Windows NT 4.0.
  • Windows 2000 Professional.
  • Windows 200x Server/Advanced Server.
  • Windows XP Professional.

All current releases of Microsoft SMB/CIFS clients support authentication via the SMB Challenge/Response mechanism described here. Enabling cleartext authentication does not disable the ability of the client to participate in encrypted authentication. Instead, it allows the client to negotiate either plain text or encrypted password handling.

MS Windows clients will cache the encrypted password alone. Where plain text passwords are re-enabled through the appropriate registry change, the plain text password is never cached. This means that in the event that a network connections should become disconnected (broken), only the cached (encrypted) password will be sent to the resource server to effect an auto-reconnect. If the resource server does not support encrypted passwords the auto-reconnect will fail. Use of encrypted passwords is strongly advised.

Advantages of Encrypted Passwords

  • Plaintext passwords are not passed across the network. Someone using a network sniffer cannot just record passwords going to the SMB server.

  • Plaintext passwords are not stored anywhere in memory or on disk.

  • Windows NT does not like talking to a server that does not support encrypted passwords. It will refuse to browse the server if the server is also in User Level security mode. It will insist on prompting the user for the password on each connection, which is very annoying. The only things you can do to stop this is to use SMB encryption.

  • Encrypted password support allows automatic share (resource) reconnects.

  • Encrypted passwords are essential for PDC/BDC operation.

Advantages of Non-Encrypted Passwords

  • Plaintext passwords are not kept on disk, and are not cached in memory.

  • Uses same password file as other UNIX services such as Login and FTP.

  • Use of other services (such as Telnet and FTP) that send plain text passwords over the network, so sending them for SMB is not such a big deal.

Mapping User Identifiers between MS Windows and UNIX

Every operation in UNIX/Linux requires a user identifier (UID), just as in MS Windows NT4/200x this requires a Security Identifier (SID). Samba provides two means for mapping an MS Windows user to a UNIX/Linux UID.

First, all Samba SAM (Security Account Manager database) accounts require a UNIX/Linux UID that the account will map to. As users are added to the account information database, Samba will call the add user script interface to add the account to the Samba host OS. In essence all accounts in the local SAM require a local user account.

The second way to effect Windows SID to UNIX UID mapping is via the idmap uid and idmap gid parameters in smb.conf. Please refer to the man page for information about these parameters. These parameters are essential when mapping users from a remote SAM server.

Mapping Common UIDs/GIDs on Distributed Machines

Samba-3 has a special facility that makes it possible to maintain identical UIDs and GIDs on all servers in a distributed network. A distributed network is one where there exists a PDC, one or more BDCs and/or one or more Domain Member servers. Why is this important? This is important if files are being shared over more than one protocol (e.g., NFS) and where users are copying files across UNIX/Linux systems using tools such as rsync.

The special facility is enabled using a parameter called idmap backend. The default setting for this parameter is an empty string. Technically it is possible to use an LDAP based idmap backend for UIDs and GIDs, but it makes most sense when this is done for network configurations that also use LDAP for the SAM backend. A sample use is shown in .

Example 11.1. Example configuration with the LDAP idmap backend

[global]
idmap backend = ldapsam:ldap://ldap-server.quenya.org:636
idmap backend = ldapsam:ldaps://ldap-server.quenya.org

A network administrator who wants to make significant use of LDAP backends will sooner or later be exposed to the excellent work done by PADL Software. PADL http://www.padl.com have produced and released to open source an array of tools that might be of interest. These tools include:

  • nss_ldap: An LDAP Name Service Switch module to provide native name service support for AIX, Linux, Solaris, and other operating systems. This tool can be used for centralized storage and retrieval of UIDs/GIDs.

  • pam_ldap: A PAM module that provides LDAP integration for UNIX/Linux system access authentication.

  • idmap_ad: An IDMAP backend that supports the Microsoft Services for UNIX RFC 2307 schema available from their web site.

Account Management Tools

Samba provides two tools for management of user and machine accounts. These tools are called smbpasswd and pdbedit. A third tool is under development but is not expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK GUI tool that looks much like the MS Windows NT4 Domain User Manager. Hopefully this will be announced in time for the Samba-3.0.1 release.

The smbpasswd Command

The smbpasswd utility is similar to the passwd or yppasswd programs. It maintains the two 32 byte password fields in the passdb backend.

smbpasswd works in a client-server mode where it contacts the local smbd to change the user's password on its behalf. This has enormous benefits.

smbpasswd has the capability to change passwords on Windows NT servers (this only works when the request is sent to the NT Primary Domain Controller if changing an NT Domain user's password).

smbpasswd can be used to:

  • add user or machine accounts.
  • delete user or machine accounts.
  • enable user or machine accounts.
  • disable user or machine accounts.
  • set to NULL user passwords.
  • manage interdomain trust accounts.

To run smbpasswd as a normal user just type:

$ smbpasswd
Old SMB password: secret

For secret, type old value here or press return if there is no old password.

New SMB Password: new secret
Repeat New SMB Password: new secret

If the old value does not match the current value stored for that user, or the two new values do not match each other, then the password will not be changed.

When invoked by an ordinary user, the command will only allow the user to change his or her own SMB password.

When run by root, smbpasswd may take an optional argument specifying the user name whose SMB password you wish to change. When run as root, smbpasswd does not prompt for or check the old password value, thus allowing root to set passwords for users who have forgotten their passwords.

smbpasswd is designed to work in the way familiar to UNIX users who use the passwd or yppasswd commands. While designed for administrative use, this tool provides essential User Level password change capabilities.

For more details on using smbpasswd, refer to the man page (the definitive reference).

The pdbedit Command

pdbedit is a tool that can be used only by root. It is used to manage the passdb backend. pdbedit can be used to:

  • add, remove or modify user accounts.
  • list user accounts.
  • migrate user accounts.

The pdbedit tool is the only one that can manage the account security and policy settings. It is capable of all operations that smbpasswd can do as well as a super set of them.

One particularly important purpose of the pdbedit is to allow the migration of account information from one passdb backend to another. See the password backend section of this chapter.

The following is an example of the user account information that is stored in a tdbsam password backend. This listing was produced by running:

$ pdbedit -Lv met
UNIX username:        met
NT username:
Account Flags:        [UX         ]
User SID:             S-1-5-21-1449123459-1407424037-3116680435-2004
Primary Group SID:    S-1-5-21-1449123459-1407424037-3116680435-1201
Full Name:            Melissa E Terpstra
Home Directory:       \\frodo\met\Win9Profile
HomeDir Drive:        H:
Logon Script:         scripts\logon.bat
Profile Path:         \\frodo\Profiles\met
Domain:               MIDEARTH
Account desc:
Workstations:         melbelle
Munged dial:
Logon time:           0
Logoff time:          Mon, 18 Jan 2038 20:14:07 GMT
Kickoff time:         Mon, 18 Jan 2038 20:14:07 GMT
Password last set:    Sat, 14 Dec 2002 14:37:03 GMT
Password can change:  Sat, 14 Dec 2002 14:37:03 GMT
Password must change: Mon, 18 Jan 2038 20:14:07 GMT

The pdbedit tool allows migration of authentication (account) databases from one backend to another. For example: To migrate accounts from an old smbpasswd database to a tdbsam backend:

  1. Set the passdb backend = tdbsam, smbpasswd.

  2. Execute:

    root# pdbedit -i smbpassed -e tdbsam
    

  3. Now remove the smbpasswd from the passdb backend configuration in smb.conf.

Password Backends

Samba offers the greatest flexibility in backend account database design of any SMB/CIFS server technology available today. The flexibility is immediately obvious as one begins to explore this capability.

It is possible to specify not only multiple different password backends, but even multiple backends of the same type. For example, to use two different tdbsam databases:

passdb backend = tdbsam:/etc/samba/passdb.tdb \
tdbsam:/etc/samba/old-passdb.tdb

Plaintext

Older versions of Samba retrieved user information from the UNIX user database and eventually some other fields from the file /etc/samba/smbpasswd or /etc/smbpasswd. When password encryption is disabled, no SMB specific data is stored at all. Instead all operations are conducted via the way that the Samba host OS will access its /etc/passwd database. Linux systems For example, all operations are done via PAM.

smbpasswd Encrypted Password Database

Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account information such as username, LM/NT password hashes, password change times, and account flags have been stored in the smbpasswd(5) file. There are several disadvantages to this approach for sites with large numbers of users (counted in the thousands).

  • The first problem is that all lookups must be performed sequentially. Given that there are approximately two lookups per domain logon (one for a normal session connection such as when mapping a network drive or printer), this is a performance bottleneck for large sites. What is needed is an indexed approach such as used in databases.

  • The second problem is that administrators who desire to replicate a smbpasswd file to more than one Samba server were left to use external tools such as rsync(1) and ssh(1) and wrote custom, in-house scripts.

  • Finally, the amount of information that is stored in an smbpasswd entry leaves no room for additional attributes such as a home directory, password expiration time, or even a Relative Identifier (RID).

As a result of these deficiencies, a more robust means of storing user attributes used by smbd was developed. The API which defines access to user accounts is commonly referred to as the samdb interface (previously this was called the passdb API, and is still so named in the Samba CVS trees).

Samba provides an enhanced set of passdb backends that overcome the deficiencies of the smbpasswd plain text database. These are tdbsam, ldapsam and xmlsam. Of these, ldapsam will be of most interest to large corporate or enterprise sites.

tdbsam

Samba can store user and machine account data in a “TDB” (Trivial Database). Using this backend does not require any additional configuration. This backend is recommended for new installations that do not require LDAP.

As a general guide, the Samba Team does not recommend using the tdbsam backend for sites that have 250 or more users. Additionally, tdbsam is not capable of scaling for use in sites that require PDB/BDC implementations that require replication of the account database. Clearly, for reason of scalability, the use of ldapsam should be encouraged.

The recommendation of a 250 user limit is purely based on the notion that this would generally involve a site that has routed networks, possibly spread across more than one physical location. The Samba Team has not at this time established the performance based scalability limits of the tdbsam architecture.

ldapsam

There are a few points to stress that the ldapsam does not provide. The LDAP support referred to in this documentation does not include:

  • A means of retrieving user account information from an Windows 200x Active Directory server.

  • A means of replacing /etc/passwd.

The second item can be accomplished by using LDAP NSS and PAM modules. LGPL versions of these libraries can be obtained from PADL Software. More information about the configuration of these packages may be found at LDAP, System Administration; Gerald Carter by O'Reilly; Chapter 6: Replacing NIS."

This document describes how to use an LDAP directory for storing Samba user account information traditionally stored in the smbpasswd(5) file. It is assumed that the reader already has a basic understanding of LDAP concepts and has a working directory server already installed. For more information on LDAP architectures and directories, please refer to the following sites:

  • OpenLDAP

  • Sun iPlanet Directory Server

Two additional Samba resources which may prove to be helpful are:

  • The Samba-PDC-LDAP-HOWTO maintained by Ignacio Coupeau.

  • The NT migration scripts from IDEALX that are geared to manage users and group in such a Samba-LDAP Domain Controller configuration.

Supported LDAP Servers

The LDAP ldapsam code has been developed and tested using the OpenLDAP 2.0 and 2.1 server and client libraries. The same code should work with Netscape's Directory Server and client SDK. However, there are bound to be compile errors and bugs. These should not be hard to fix. Please submit fixes via the process outlined in .

Schema and Relationship to the RFC 2307 posixAccount

Samba-3.0 includes the necessary schema file for OpenLDAP 2.0 in examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here:

objectclass (1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
    DESC 'Samba-3.0 Auxiliary SAM Account'
    MUST ( uid $ sambaSID )
    MAY  ( cn $ sambaLMPassword $ sambaNTPassword $ sambaPwdLastSet $
          sambaLogonTime $ sambaLogoffTime $ sambaKickoffTime $
          sambaPwdCanChange $ sambaPwdMustChange $ sambaAcctFlags $
          displayName $ sambaHomePath $ sambaHomeDrive $ sambaLogonScript $
          sambaProfilePath $ description $ sambaUserWorkstations $
          sambaPrimaryGroupSID $ sambaDomainName ))

The samba.schema file has been formatted for OpenLDAP 2.0/2.1. The Samba Team owns the OID space used by the above schema and recommends its use. If you translate the schema to be used with Netscape DS, please submit the modified schema file as a patch to jerry@samba.org.

Just as the smbpasswd file is meant to store information that provides information additional to a user's /etc/passwd entry, so is the sambaSamAccount object meant to supplement the UNIX user account information. A sambaSamAccount is a AUXILIARY objectclass so it can be used to augment existing user account information in the LDAP directory, thus providing information needed for Samba account handling. However, there are several fields (e.g., uid) that overlap with the posixAccount objectclass outlined in RFC2307. This is by design.

In order to store all user account information (UNIX and Samba) in the directory, it is necessary to use the sambaSamAccount and posixAccount objectclasses in combination. However, smbd will still obtain the user's UNIX account information via the standard C library calls (e.g., getpwnam(), et al). This means that the Samba server must also have the LDAP NSS library installed and functioning correctly. This division of information makes it possible to store all Samba account information in LDAP, but still maintain UNIX account information in NIS while the network is transitioning to a full LDAP infrastructure.

OpenLDAP Configuration

To include support for the sambaSamAccount object in an OpenLDAP directory server, first copy the samba.schema file to slapd's configuration directory. The samba.schema file can be found in the directory examples/LDAP in the Samba source distribution.

root# cp samba.schema /etc/openldap/schema/

Next, include the samba.schema file in slapd.conf. The sambaSamAccount object contains two attributes that depend on other schema files. The uid attribute is defined in cosine.schema and the displayName attribute is defined in the inetorgperson.schema file. Both of these must be included before the samba.schema file.

## /etc/openldap/slapd.conf

## schema files (core.schema is required by default)
include	           /etc/openldap/schema/core.schema

## needed for sambaSamAccount
include            /etc/openldap/schema/cosine.schema
include            /etc/openldap/schema/inetorgperson.schema
include            /etc/openldap/schema/samba.schema
include            /etc/openldap/schema/nis.schema
....

It is recommended that you maintain some indices on some of the most useful attributes, as in the following example, to speed up searches made on sambaSamAccount objectclasses (and possibly posixAccount and posixGroup as well):

# Indices to maintain
## required by OpenLDAP
index objectclass             eq

index cn                      pres,sub,eq
index sn                      pres,sub,eq
## required to support pdb_getsampwnam
index uid                     pres,sub,eq
## required to support pdb_getsambapwrid()
index displayName             pres,sub,eq

## uncomment these if you are storing posixAccount and
## posixGroup entries in the directory as well
##index uidNumber               eq
##index gidNumber               eq
##index memberUid               eq

index   sambaSID              eq
index   sambaPrimaryGroupSID  eq
index   sambaDomainName       eq
index   default               sub

Create the new index by executing:

root# ./sbin/slapindex -f slapd.conf

Remember to restart slapd after making these changes:

root# /etc/init.d/slapd restart

Initialize the LDAP Database

Before you can add accounts to the LDAP database you must create the account containers that they will be stored in. The following LDIF file should be modified to match your needs (DNS entries, and so on):

# Organization for Samba Base
dn: dc=quenya,dc=org
objectclass: dcObject
objectclass: organization
dc: quenya
o: Quenya Org Network
description: The Samba-3 Network LDAP Example

# Organizational Role for Directory Management
dn: cn=Manager,dc=quenya,dc=org
objectclass: organizationalRole
cn: Manager
description: Directory Manager

# Setting up container for users
dn: ou=People,dc=quenya,dc=org
objectclass: top
objectclass: organizationalUnit
ou: People

# Setting up admin handle for People OU
dn: cn=admin,ou=People,dc=quenya,dc=org
cn: admin
objectclass: top
objectclass: organizationalRole
objectclass: simpleSecurityObject
userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz

# Setting up container for groups
dn: ou=Groups,dc=quenya,dc=org
objectclass: top
objectclass: organizationalUnit
ou: People

# Setting up admin handle for Groups OU
dn: cn=admin,ou=Groups,dc=quenya,dc=org
cn: admin
objectclass: top
objectclass: organizationalRole
objectclass: simpleSecurityObject
userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz

# Setting up container for computers
dn: ou=Computers,dc=quenya,dc=org
objectclass: top
objectclass: organizationalUnit
ou: People

# Setting up admin handle for Computers OU
dn: cn=admin,ou=Computers,dc=quenya,dc=org
cn: admin
objectclass: top
objectclass: organizationalRole
objectclass: simpleSecurityObject
userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz

The userPassword shown above should be generated using slappasswd.

The following command will then load the contents of the LDIF file into the LDAP database.

$ slapadd -v -l initldap.dif

Do not forget to secure your LDAP server with an adequate access control list as well as an admin password.

Note

Before Samba can access the LDAP server you need to store the LDAP admin password into the Samba-3 secrets.tdb database by:

root# smbpasswd -w secret

Configuring Samba

The following parameters are available in smb.conf only if your version of Samba was built with LDAP support. Samba automatically builds with LDAP support if the LDAP libraries are found.

LDAP related smb.conf options: passdb backend = ldapsam:url, ldap admin dn, ldap delete dn, ldap filter, ldap group suffix, ldap idmap suffix, ldap machine suffix, ldap passwd sync, ldap ssl, ldap suffix, ldap user suffix,

These are described in the smb.conf man page and so will not be repeated here. However, a sample smb.conf file for use with an LDAP directory could appear as shown in .

Example 11.2. Configuration with LDAP

[global]
security = user
encrypt passwords = yes
netbios name = MORIA
workgroup = NOLDOR
# ldap related parameters
# define the DN to use when binding to the directory servers
# The password for this DN is not stored in smb.conf. Rather it
# must be set by using 'smbpasswd -w secretpw' to store the
# passphrase in the secrets.tdb file. If the "ldap admin dn" values
# change, this password will need to be reset.
ldap admin dn = "cn=Manager,ou=People,dc=quenya,dc=org"
# Define the SSL option when connecting to the directory
# ('off', 'start tls', or 'on' (default))
ldap ssl = start tls
# syntax: passdb backend = ldapsam:ldap://server-name[:port]
passdb backend = ldapsam:ldap://frodo.quenya.org
# smbpasswd -x delete the entire dn-entry
ldap delete dn = no
# the machine and user suffix added to the base suffix
# wrote WITHOUT quotes. NULL suffixes by default
ldap user suffix = ou=People
ldap group suffix = ou=Groups
ldap machine suffix = ou=Computers
# Trust UNIX account information in LDAP
# (see the smb.conf manpage for details)
# specify the base DN to use when searching the directory
ldap suffix = ou=People,dc=quenya,dc=org
# generally the default ldap search filter is ok
ldap filter = (&(uid=%u)(objectclass=sambaSamAccount))

Accounts and Groups Management

As user accounts are managed through the sambaSamAccount objectclass, you should modify your existing administration tools to deal with sambaSamAccount attributes.

Machine accounts are managed with the sambaSamAccount objectclass, just like users accounts. However, it is up to you to store those accounts in a different tree of your LDAP namespace. You should use “ou=Groups,dc=quenya,dc=org” to store groups and “ou=People,dc=quenya,dc=org” to store users. Just configure your NSS and PAM accordingly (usually, in the /etc/openldap/sldap.conf configuration file).

In Samba-3, the group management system is based on POSIX groups. This means that Samba makes use of the posixGroup objectclass. For now, there is no NT-like group system management (global and local groups). Samba-3 knows only about Domain Groups and, unlike MS Windows 2000 and Active Directory, Samba-3 does not support nested groups.

Security and sambaSamAccount

There are two important points to remember when discussing the security of sambaSamAccount entries in the directory.

  • Never retrieve the lmPassword or ntPassword attribute values over an unencrypted LDAP session.

  • Never allow non-admin users to view the lmPassword or ntPassword attribute values.

These password hashes are cleartext equivalents and can be used to impersonate the user without deriving the original cleartext strings. For more information on the details of LM/NT password hashes, refer to the section of this chapter.

To remedy the first security issue, the ldap ssl smb.conf parameter defaults to require an encrypted session (ldap ssl = on) using the default port of 636 when contacting the directory server. When using an OpenLDAP server, it is possible to use the use the StartTLS LDAP extended operation in the place of LDAPS. In either case, you are strongly discouraged to disable this security (ldap ssl = off).

Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS extended operation. However, the OpenLDAP library still provides support for the older method of securing communication between clients and servers.

The second security precaution is to prevent non-administrative users from harvesting password hashes from the directory. This can be done using the following ACL in slapd.conf:

## allow the "ldap admin dn" access, but deny everyone else
access to attrs=lmPassword,ntPassword
     by dn="cn=Samba Admin,ou=People,dc=quenya,dc=org" write
     by * none

LDAP Special Attributes for sambaSamAccounts

The sambaSamAccount objectclass is composed of the attributes shown in , and .

Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP) Part A

sambaLMPasswordThe LANMAN password 16-byte hash stored as a character representation of a hexadecimal string.
sambaNTPasswordThe NT password hash 16-byte stored as a character representation of a hexadecimal string.
sambaPwdLastSetThe integer time in seconds since 1970 when the sambaLMPassword and sambaNTPassword attributes were last set.
sambaAcctFlagsString of 11 characters surrounded by square brackets [] representing account flags such as U (user), W (workstation), X (no password expiration), I (Domain trust account), H (Home dir required), S (Server trust account), and D (disabled).
sambaLogonTimeInteger value currently unused
sambaLogoffTimeInteger value currently unused
sambaKickoffTimeSpecifies the time (UNIX time format) when the user will be locked down and cannot login any longer. If this attribute is ommited, then the account will never expire. If you use this attribute together with `shadowExpire' of the `shadowAccount' objectClass, will enable accounts to expire completly on an exact date.
sambaPwdCanChangeSpecifies the time (UNIX time format) from which on the user is allowed to change his password. If attribute is not set, the user will be free to change his password whenever he wants.
sambaPwdMustChangeSpecifies the time (UNIX time format) since when the user is forced to change his password. If this value is set to `0', the user will have to change his password at first login. If this attribute is not set, then the password will never expire.
sambaHomeDriveSpecifies the drive letter to which to map the UNC path specified by sambaHomePath. The drive letter must be specified in the form “X:” where X is the letter of the drive to map. Refer to the “logon drive” parameter in the smb.conf(5) man page for more information.
sambaLogonScriptThe sambaLogonScript property specifies the path of the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path is relative to the netlogon share. Refer to the logon script parameter in the smb.conf man page for more information.
sambaProfilePathSpecifies a path to the user's profile. This value can be a null string, a local absolute path, or a UNC path. Refer to the logon path parameter in the smb.conf man page for more information.
sambaHomePathThe sambaHomePath property specifies the path of the home directory for the user. The string can be null. If sambaHomeDrive is set and specifies a drive letter, sambaHomePath should be a UNC path. The path must be a network UNC path of the form \\server\share\directory. This value can be a null string. Refer to the logon home parameter in the smb.conf man page for more information.

Table 11.2. Attributes in the sambaSamAccount objectclass (LDAP) Part B

sambaUserWorkstationsHere you can give a comma-seperated list of machines on which the user is allowed to login. You may observe problems when you try to connect to an Samba Domain Member. Bacause Domain Members are not in this list, the Domain Controllers will reject them. Where this attribute is ommited, the default implies no restrictions.
sambaSIDThe security identifier(SID) of the user. The Windows equivalent of UNIX UIDs.
sambaPrimaryGroupSIDThe Security IDentifier (SID) of the primary group of the user.
sambaDomainNameDomain the user is part of.

The majority of these parameters are only used when Samba is acting as a PDC of a domain (refer to , for details on how to configure Samba as a Primary Domain Controller). The following four attributes are only stored with the sambaSamAccount entry if the values are non-default values:

  • sambaHomePath
  • sambaLogonScript
  • sambaProfilePath
  • sambaHomeDrive

These attributes are only stored with the sambaSamAccount entry if the values are non-default values. For example, assume MORIA has now been configured as a PDC and that logon home = \\%L\%u was defined in its smb.conf file. When a user named “becky” logons to the domain, the logon home string is expanded to \\MORIA\becky. If the smbHome attribute exists in the entry “uid=becky,ou=People,dc=samba,dc=org”, this value is used. However, if this attribute does not exist, then the value of the logon home parameter is used in its place. Samba will only write the attribute value to the directory entry if the value is something other than the default (e.g., \\MOBY\becky).

Example LDIF Entries for a sambaSamAccount

The following is a working LDIF that demonstrates the use of the SambaSamAccount objectclass:

	dn: uid=guest2, ou=People,dc=quenya,dc=org
	sambaLMPassword: 878D8014606CDA29677A44EFA1353FC7
	sambaPwdMustChange: 2147483647
	sambaPrimaryGroupSID: S-1-5-21-2447931902-1787058256-3961074038-513
	sambaNTPassword: 552902031BEDE9EFAAD3B435B51404EE
	sambaPwdLastSet: 1010179124
	sambaLogonTime: 0
	objectClass: sambaSamAccount
	uid: guest2
	sambaKickoffTime: 2147483647
	sambaAcctFlags: [UX         ]
	sambaLogoffTime: 2147483647
	sambaSID: S-1-5-21-2447931902-1787058256-3961074038-5006
	sambaPwdCanChange: 0
	

The following is an LDIF entry for using both the sambaSamAccount and posixAccount objectclasses:

	dn: uid=gcarter, ou=People,dc=quenya,dc=org
	sambaLogonTime: 0
	displayName: Gerald Carter
	sambaLMPassword: 552902031BEDE9EFAAD3B435B51404EE
	sambaPrimaryGroupSID: S-1-5-21-2447931902-1787058256-3961074038-1201
	objectClass: posixAccount
	objectClass: sambaSamAccount
	sambaAcctFlags: [UX         ]
	userPassword: {crypt}BpM2ej8Rkzogo
	uid: gcarter
	uidNumber: 9000
	cn: Gerald Carter
	loginShell: /bin/bash
	logoffTime: 2147483647
	gidNumber: 100
	sambaKickoffTime: 2147483647
	sambaPwdLastSet: 1010179230
	sambaSID: S-1-5-21-2447931902-1787058256-3961074038-5004
	homeDirectory: /home/moria/gcarter
	sambaPwdCanChange: 0
	sambaPwdMustChange: 2147483647
	sambaNTPassword: 878D8014606CDA29677A44EFA1353FC7

Password Synchronization

Samba-3 and later can update the non-samba (LDAP) password stored with an account. When using pam_ldap, this allows changing both UNIX and Windows passwords at once.

The ldap passwd sync options can have the values shown in .

Table 11.3. Possible ldap passwd sync values

ValueDescription
yes

When the user changes his password, update ntPassword, lmPassword and the password fields.

no

Only update ntPassword and lmPassword.

only

Only update the LDAP password and let the LDAP server worry about the other fields. This option is only available on some LDAP servers. Only when the LDAP server supports LDAP_EXOP_X_MODIFY_PASSWD.

More information can be found in the smb.conf manpage.

MySQL

Every so often someone will come along with a great new idea. Storing user accounts in a SQL backend is one of them. Those who want to do this are in the best position to know what the specific benefits are to them. This may sound like a cop-out, but in truth we cannot attempt to document every little detail why certain things of marginal utility to the bulk of Samba users might make sense to the rest. In any case, the following instructions should help the determined SQL user to implement a working system.

Creating the Database

You can set up your own table and specify the field names to pdb_mysql (see below for the column names) or use the default table. The file examples/pdb/mysql/mysql.dump contains the correct queries to create the required tables. Use the command:

$ mysql -uusername -hhostname -ppassword \
	databasename < /path/to/samba/examples/pdb/mysql/mysql.dump

Configuring

This plugin lacks some good documentation, but here is some brief infoormation. Add the following to the passdb backend variable in your smb.conf:

passdb backend = [other-plugins] mysql:identifier [other-plugins]

The identifier can be any string you like, as long as it does not collide with the identifiers of other plugins or other instances of pdb_mysql. If you specify multiple pdb_mysql.so entries in passdb backend, you also need to use different identifiers.

Additional options can be given through the smb.conf file in the [global] section. Refer to .

Table 11.4. Basic smb.conf options for MySQL passdb backend

FieldContents
mysql hostHost name, defaults to `localhost'
mysql password 
mysql userDefaults to `samba'
mysql databaseDefaults to `samba'
mysql portDefaults to 3306
tableName of the table containing the users

Warning

Since the password for the MySQL user is stored in the smb.conf file, you should make the smb.conf file readable only to the user who runs Samba. This is considered a security bug and will soon be fixed.

Names of the columns are given in . The default column names can be found in the example table dump.

Table 11.5. MySQL field names for MySQL passdb backend

FieldTypeContents
logon time columnint(9)UNIX time stamp of last logon of user
logoff time columnint(9)UNIX time stamp of last logoff of user
kickoff time columnint(9)UNIX time stamp of moment user should be kicked off workstation (not enforced)
pass last set time columnint(9)UNIX time stamp of moment password was last set
pass can change time columnint(9)UNIX time stamp of moment from which password can be changed
pass must change time columnint(9)UNIX time stamp of moment on which password must be changed
username columnvarchar(255)UNIX username
domain columnvarchar(255)NT domain user belongs to
nt username columnvarchar(255)NT username
fullname columnvarchar(255)Full name of user
home dir columnvarchar(255)UNIX homedir path
dir drive columnvarchar(2)Directory drive path (e.g., “H:”)
logon script columnvarchar(255)Batch file to run on client side when logging on
profile path columnvarchar(255)Path of profile
acct desc columnvarchar(255)Some ASCII NT user data
workstations columnvarchar(255)Workstations user can logon to (or NULL for all)
unknown string columnvarchar(255)Unknown string
munged dial columnvarchar(255)Unknown
user sid columnvarchar(255)NT user SID
group sid columnvarchar(255)NT group SID
lanman pass columnvarchar(255)Encrypted lanman password
nt pass columnvarchar(255)Encrypted nt passwd
plain pass columnvarchar(255)Plaintext password
acct ctrl columnint(9)NT user data
unknown 3 columnint(9)Unknown
logon divs columnint(9)Unknown
hours len columnint(9)Unknown
bad password count columnint(5)Number of failed password tries before disabling an account
logon count columnint(5)Number of logon attempts
unknown 6 columnint(9)Unknown

You can put a colon (:) after the name of each column, which should specify the column to update when updating the table. You can also specify nothing behind the colon. Then the field data will not be updated. Setting a column name to NULL means the field should not be used.

An example configuration can be found in .

Example 11.3. Example configuration for the MySQL passdb backend

[global]
passdb backend = mysql:foo
foo:mysql user = samba
foo:mysql password = abmas
foo:mysql database = samba
# domain name is static and can't be changed
foo:domain column = 'MYWORKGROUP':
# The fullname column comes from several other columns
foo:fullname column = CONCAT(firstname,' ',surname):
# Samba should never write to the password columns
foo:lanman pass column = lm_pass:
foo:nt pass column = nt_pass:
# The unknown 3 column is not stored
foo:unknown 3 column = NULL

Using Plaintext Passwords or Encrypted Password

I strongly discourage the use of plaintext passwords, however, you can use them.

If you would like to use plaintext passwords, set `identifier:lanman pass column' and `identifier:nt pass column' to `NULL' (without the quotes) and `identifier:plain pass column' to the name of the column containing the plaintext passwords.

If you use encrypted passwords, set the 'identifier:plain pass column' to 'NULL' (without the quotes). This is the default.

Getting Non-Column Data from the Table

It is possible to have not all data in the database by making some `constant'.

For example, you can set `identifier:fullname column' to something like CONCAT(Firstname,' ',Surname)

Or, set `identifier:workstations column' to: NULL

See the MySQL documentation for more language constructs.

XML

This module requires libxml2 to be installed.

The usage of pdb_xml is fairly straightforward. To export data, use:

$ pdbedit -e xml:filename

(where filename is the name of the file to put the data in)

To import data, use: $ pdbedit -i xml:filename

Common Errors

Users Cannot Logon

I've installed Samba, but now I can't log on with my UNIX account!

Make sure your user has been added to the current Samba passdb backend. Read the section for details.

Users Being Added to the Wrong Backend Database

A few complaints have been received from users that just moved to Samba-3. The following smb.conf file entries were causing problems, new accounts were being added to the old smbpasswd file, not to the tdbsam passdb.tdb file:

[global]
...
passdb backend = smbpasswd, tdbsam
...

Samba will add new accounts to the first entry in the passdb backend parameter entry. If you want to update to the tdbsam, then change the entry to:

passdb backend = tdbsam, smbpasswd

Configuration of auth methods

When explicitly setting an auth methods parameter, guest must be specified as the first entry on the line, for example, auth methods = guest sam.

This is the exact opposite of the requirement for the passdb backend option, where it must be the LAST parameter on the line.

Chapter 12. Group Mapping MS Windows and UNIX

John H. Terpstra

Samba Team

Jean François Micouleau

Gerald (Jerry) Carter

Samba Team

Starting with Samba-3, new group mapping functionality is available to create associations between Windows group SIDs and UNIX groups. The groupmap subcommand included with the net tool can be used to manage these associations.

The new facility for mapping NT Groups to UNIX system groups allows the administrator to decide which NT Domain Groups are to be exposed to MS Windows clients. Only those NT Groups that map to a UNIX group that has a value other than the default (-1) will be exposed in group selection lists in tools that access domain users and groups.

Warning

The domain admin group parameter has been removed in Samba-3 and should no longer be specified in smb.conf. This parameter was used to give the listed users membership in the Domain Admins Windows group which gave local admin rights on their workstations (in default configurations).

Features and Benefits

Samba allows the administrator to create MS Windows NT4/200x group accounts and to arbitrarily associate them with UNIX/Linux group accounts.

Group accounts can be managed using the MS Windows NT4 or MS Windows 200x/XP Professional MMC tools. Appropriate interface scripts should be provided in smb.conf if it is desired that UNIX/Linux system accounts should be automatically created when these tools are used. In the absence of these scripts, and so long as winbindd is running, Samba group accounts that are created using these tools will be allocated UNIX UIDs/GIDs from the ID range specified by the idmap uid/idmap gid parameters in the smb.conf file.

Figure 12.1. IDMAP: group SID to GID resolution.

IDMAP: group SID to GID resolution.

Figure 12.2. IDMAP: GID resolution to matching SID.

IDMAP: GID resolution to matching SID.

In both cases, when winbindd is not running, only locally resolvable groups can be recognized. Please refer to and . The net groupmap is used to establish UNIX group to NT SID mappings as shown in .

Figure 12.3. IDMAP storing group mappings.

IDMAP storing group mappings.

Administrators should be aware that where smb.conf group interface scripts make direct calls to the UNIX/Linux system tools (the shadow utilities, groupadd, groupdel, and groupmod), the resulting UNIX/Linux group names will be subject to any limits imposed by these tools. If the tool does not allow upper case characters or space characters, then the creation of an MS Windows NT4/200x style group of Engineering Managers will attempt to create an identically named UNIX/Linux group, an attempt that will of course fail.

There are several possible work-arounds for the operating system tools limitation. One method is to use a script that generates a name for the UNIX/Linux system group that fits the operating system limits, and that then just passes the UNIX/Linux group ID (GID) back to the calling Samba interface. This will provide a dynamic work-around solution.

Another work-around is to manually create a UNIX/Linux group, then manually create the MS Windows NT4/200x group on the Samba server and then use the net groupmap tool to connect the two to each other.

Discussion

When installing MS Windows NT4/200x on a computer, the installation program creates default users and groups, notably the Administrators group, and gives that group privileges necessary privileges to perform essential system tasks, such as the ability to change the date and time or to kill (or close) any process running on the local machine.

The Administrator user is a member of the Administrators group, and thus inherits Administrators group privileges. If a joe user is created to be a member of the Administrators group, joe has exactly the same rights as the user, Administrator.

When an MS Windows NT4/200x/XP machine is made a Domain Member, the “Domain Admins” group of the PDC is added to the local Administrators group of the workstation. Every member of the Domain Administrators group inherits the rights of the local Administrators group when logging on the workstation.

The following steps describe how to make Samba PDC users members of the Domain Admins group?

  1. Create a UNIX group (usually in /etc/group), let's call it domadm.

  2. Add to this group the users that must be “Administrators”. For example, if you want joe, john and mary to be administrators, your entry in /etc/group will look like this:

    		domadm:x:502:joe,john,mary
    		

  3. Map this domadm group to the “Domain Admins” group by running the command:

    	root# net groupmap add ntgroup=“Domain Admins” UNIXgroup=domadm
    	

    The quotes around “Domain Admins” are necessary due to the space in the group name. Also make sure to leave no white-space surrounding the equal character (=).

Now joe, john and mary are domain administrators.

It is possible to map any arbitrary UNIX group to any Windows NT4/200x group as well as making any UNIX group a Windows domain group. For example, if you wanted to include a UNIX group (e.g., acct) in an ACL on a local file or printer on a Domain Member machine, you would flag that group as a domain group by running the following on the Samba PDC:

root# net groupmap add rid=1000 ntgroup="Accounting" UNIXgroup=acct

Be aware that the RID parameter is a unsigned 32-bit integer that should normally start at 1000. However, this RID must not overlap with any RID assigned to a user. Verification for this is done differently depending on the passdb backend you are using. Future versions of the tools may perform the verification automatically, but for now the burden is on you.

Default Users, Groups and Relative Identifiers

When first installed, Microsoft Windows NT4/200x/XP are preconfigured with certain User, Group, and Alias entities. Each has a well-known Relative Identifier (RID). These must be preserved for continued integrity of operation. Samba must be provisioned with certain essential Domain Groups that require the appropriate RID value. When Samba-3 is configured to use tdbsam the essential Domain Groups are automatically created. It is the LDAP administrators' responsibility to create (provision) the default NT Groups.

Each essential Domain Group must be assigned its respective well-kown RID. The default Users, Groups, Aliases, and RIDs are shown in .

Note

When the passdb backend uses LDAP (ldapsam) it is the admininstrators' responsibility to create the essential Domain Groups, and to assign each its default RID.

It is permissible to create any Domain Group that may be necessary, just make certain that the essential Domain Groups (well known) have been created and assigned its default RID. Other groups you create may be assigned any arbitrary RID you care to use.

Be sure to map each Domain Group to a UNIX system group. That is the only way to ensure that the group will be available for use as an NT Domain Group.

Table 12.1. Well-Known User Default RIDs

Well-Known EntityRIDTypeEssential
Domain Administrator500UserNo
Domain Guest501UserNo
Domain KRBTGT502UserNo
Domain Admins512GroupYes
Domain Users513GroupYes
Domain Guests514GroupYes
Domain Computers515GroupNo
Domain Controllers516GroupNo
Domain Certificate Admins517GroupNo
Domain Schema Admins518GroupNo
Domain Enterprise Admins519GroupNo
Domain Policy Admins520GroupNo
Builtin Admins544AliasNo
Builtin users545AliasNo
Builtin Guests546AliasNo
Builtin Power Users547AliasNo
Builtin Account Operators548AliasNo
Builtin System Operators549AliasNo
Builtin Print Operators550AliasNo
Builtin Backup Operators551AliasNo
Builtin Replicator552AliasNo
Builtin RAS Servers553AliasNo

Example Configuration

You can list the various groups in the mapping database by executing net groupmap list. Here is an example:

root#  net groupmap list
Domain Admins (S-1-5-21-2547222302-1596225915-2414751004-512) -> domadmin
Domain Users (S-1-5-21-2547222302-1596225915-2414751004-513) -> domuser
Domain Guests (S-1-5-21-2547222302-1596225915-2414751004-514) -> domguest

For complete details on net groupmap, refer to the net(8) man page.

Configuration Scripts

Everyone needs tools. Some of us like to create our own, others prefer to use canned tools (i.e., prepared by someone else for general use).

Sample smb.conf Add Group Script

A script to create complying group names for use by the Samba group interfaces is provided in .

Example 12.1. smbgrpadd.sh


#!/bin/bash

# Add the group using normal system groupadd tool.
groupadd smbtmpgrp00

thegid=`cat /etc/group | grep smbtmpgrp00 | cut -d ":" -f3`

# Now change the name to what we want for the MS Windows networking end
cp /etc/group /etc/group.bak
cat /etc/group.bak | sed s/smbtmpgrp00/$1/g > /etc/group

# Now return the GID as would normally happen.
echo $thegid
exit 0

The smb.conf entry for the above script would be something like that in .

Example 12.2. Configuration of smb.conf for the add group script.

[global]
...
add group script = /path_to_tool/smbgrpadd.sh %g
...

Script to Configure Group Mapping

In our example we have created a UNIX/Linux group called ntadmin. Our script will create the additional groups Orks, Elves, and Gnomes. It is a good idea to save this shell script for later re-use just in case you ever need to rebuild your mapping database. For the sake of concenience we elect to save this script as a file called initGroups.sh. This script is given in .

Example 12.3. Script to Set Group Mapping

#!/bin/bash

net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmin
net groupmap modify ntgroup="Domain Users" unixgroup=users
net groupmap modify ntgroup="Domain Guests" unixgroup=nobody

groupadd Orks
groupadd Elves
groupadd Gnomes

net groupmap add ntgroup="Orks"   unixgroup=Orks   type=d
net groupmap add ntgroup="Elves"  unixgroup=Elves  type=d
net groupmap add ntgroup="Gnomes" unixgroup=Gnomes type=d

Of course it is expected that the administrator will modify this to suit local needs. For information regarding the use of the net groupmap tool please refer to the man page.

Common Errors

At this time there are many little surprises for the unwary administrator. In a real sense it is imperative that every step of automated control scripts must be carefully tested manually before putting them into active service.

Adding Groups Fails

This is a common problem when the groupadd is called directly by the Samba interface script for the add group script in the smb.conf file.

The most common cause of failure is an attempt to add an MS Windows group account that has either an upper case character and/or a space character in it.

There are three possible work-arounds. First, use only group names that comply with the limitations of the UNIX/Linux groupadd system tool. Second, it involves the use of the script mentioned earlier in this chapter, and third is the option is to manually create a UNIX/Linux group account that can substitute for the MS Windows group name, then use the procedure listed above to map that group to the MS Windows group.

Adding MS Windows Groups to MS Windows Groups Fails

Samba-3 does not support nested groups from the MS Windows control environment.

Adding Domain Users to the Power Users Group

What must I do to add Domain Users to the Power Users group?

The Power Users group is a group that is local to each Windows 200x/XP Professional workstation. You cannot add the Domain Users group to the Power Users group automatically, it must be done on each workstation by logging in as the local workstation administrator and then using the following procedure:

  1. Click Start -> Control Panel -> Users and Passwords.

  2. Click the Advanced tab.

  3. Click the Advanced button.

  4. Click Groups.

  5. Double click Power Users. This will launch the panel to add users or groups to the local machine Power Uses group.

  6. Click the Add button.

  7. Select the domain from which the Domain Users group is to be added.

  8. Double click the Domain Users group.

  9. Click the Ok button. If a logon box is presented during this process please remember to enter the connect as DOMAIN\UserName. i.e., For the domain MIDEARTH and the user root enter MIDEARTH\root.

Chapter 13. File, Directory and Share Access Controls

John H. Terpstra

Samba Team

Jeremy Allison

Samba Team

Jelmer R. Vernooij

drawing
The Samba Team

May 10, 2003

Advanced MS Windows users are frequently perplexed when file, directory and share manipulation of resources shared via Samba do not behave in the manner they might expect. MS Windows network administrators are often confused regarding network access controls and how to provide users with the access they need while protecting resources from unauthorized access.

Many UNIX administrators are unfamiliar with the MS Windows environment and in particular have difficulty in visualizing what the MS Windows user wishes to achieve in attempts to set file and directory access permissions.

The problem lies in the differences in how file and directory permissions and controls work between the two environments. This difference is one that Samba cannot completely hide, even though it does try to bridge the chasm to a degree.

POSIX Access Control List technology has been available (along with Extended Attributes) for UNIX for many years, yet there is little evidence today of any significant use. This explains to some extent the slow adoption of ACLs into commercial Linux products. MS Windows administrators are astounded at this, given that ACLs were a foundational capability of the now decade-old MS Windows NT operating system.

The purpose of this chapter is to present each of the points of control that are possible with Samba-3 in the hope that this will help the network administrator to find the optimum method for delivering the best environment for MS Windows desktop users.

This is an opportune point to mention that Samba was created to provide a means of interoperability and interchange of data between differing operating environments. Samba has no intent to change UNIX/Linux into a platform like MS Windows. Instead the purpose was and is to provide a sufficient level of exchange of data between the two environments. What is available today extends well beyond early plans and expectations, yet the gap continues to shrink.

Features and Benefits

Samba offers a lot of flexibility in file system access management. These are the key access control facilities present in Samba today:

Samba Access Control Facilities

  • UNIX File and Directory Permissions

    Samba honors and implements UNIX file system access controls. Users who access a Samba server will do so as a particular MS Windows user. This information is passed to the Samba server as part of the logon or connection setup process. Samba uses this user identity to validate whether or not the user should be given access to file system resources (files and directories). This chapter provides an overview for those to whom the UNIX permissions and controls are a little strange or unknown.

  • Samba Share Definitions

    In configuring share settings and controls in the smb.conf file, the network administrator can exercise overrides to native file system permissions and behaviors. This can be handy and convenient to effect behavior that is more like what MS Windows NT users expect but it is seldom the best way to achieve this. The basic options and techniques are described herein.

  • Samba Share ACLs

    Just like it is possible in MS Windows NT to set ACLs on shares themselves, so it is possible to do this in Samba. Few people make use of this facility, yet it remains on of the easiest ways to affect access controls (restrictions) and can often do so with minimum invasiveness compared with other methods.

  • MS Windows ACLs through UNIX POSIX ACLs

    The use of POSIX ACLs on UNIX/Linux is possible only if the underlying operating system supports them. If not, then this option will not be available to you. Current UNIX technology platforms have native support for POSIX ACLs. There are patches for the Linux kernel that also provide this. Sadly, few Linux platforms ship today with native ACLs and Extended Attributes enabled. This chapter has pertinent information for users of platforms that support them.

File System Access Controls

Perhaps the most important recognition to be made is the simple fact that MS Windows NT4/200x/XP implement a totally divergent file system technology from what is provided in the UNIX operating system environment. First we consider what the most significant differences are, then we look at how Samba helps to bridge the differences.

MS Windows NTFS Comparison with UNIX File Systems

Samba operates on top of the UNIX file system. This means it is subject to UNIX file system conventions and permissions. It also means that if the MS Windows networking environment requires file system behavior that differs from UNIX file system behavior then somehow Samba is responsible for emulating that in a transparent and consistent manner.

It is good news that Samba does this to a large extent and on top of that provides a high degree of optional configuration to override the default behavior. We look at some of these over-rides, but for the greater part we will stay within the bounds of default behavior. Those wishing to explore the depths of control ability should review the smb.conf man page.

The following compares file system features for UNIX with those of Microsoft Windows NT/200x:

Name Space

MS Windows NT4/200x/XP files names may be up to 254 characters long, and UNIX file names may be 1023 characters long. In MS Windows, file extensions indicate particular file types, in UNIX this is not so rigorously observed as all names are considered arbitrary.

What MS Windows calls a folder, UNIX calls a directory.

Case Sensitivity

MS Windows file names are generally upper case if made up of 8.3 (8 character file name and 3 character extension. File names that are longer than 8.3 are case preserving and case insensitive.

UNIX file and directory names are case sensitive and case preserving. Samba implements the MS Windows file name behavior, but it does so as a user application. The UNIX file system provides no mechanism to perform case insensitive file name lookups. MS Windows does this by default. This means that Samba has to carry the processing overhead to provide features that are not native to the UNIX operating system environment.

Consider the following. All are unique UNIX names but one single MS Windows file name:

				MYFILE.TXT
				MyFile.txt
				myfile.txt
		

So clearly, in an MS Windows file name space these three files cannot co-exist, but in UNIX they can.

So what should Samba do if all three are present? That which is lexically first will be accessible to MS Windows users, the others are invisible and unaccessible any other solution would be suicidal.

Directory Separators

MS Windows and DOS uses the backslash \ as a directory delimiter, and UNIX uses the forward-slash / as its directory delimiter. This is handled transparently by Samba.

Drive Identification

MS Windows products support a notion of drive letters, like C: to represent disk partitions. UNIX has no concept of separate identifiers for file partitions, each such file system is mounted to become part of the overall directory tree. The UNIX directory tree begins at / just like the root of a DOS drive is specified as C:\.

File Naming Conventions

MS Windows generally never experiences file names that begin with a dot (.) while in UNIX these are commonly found in a user's home directory. Files that begin with a dot (.) are typically either start-up files for various UNIX applications, or they may be files that contain start-up configuration data.

Links and Short-Cuts

MS Windows make use of “links and short-cuts” that are actually special types of files that will redirect an attempt to execute the file to the real location of the file. UNIX knows of file and directory links, but they are entirely different from what MS Windows users are used to.

Symbolic links are files in UNIX that contain the actual location of the data (file or directory). An operation (like read or write) will operate directly on the file referenced. Symbolic links are also referred to as “soft links.” A hard link is something that MS Windows is not familiar with. It allows one physical file to be known simultaneously by more than one file name.

There are many other subtle differences that may cause the MS Windows administrator some temporary discomfort in the process of becoming familiar with UNIX/Linux. These are best left for a text that is dedicated to the purpose of UNIX/Linux training and education.

Managing Directories

There are three basic operations for managing directories: create, delete, rename.

Table 13.1. Managing Directories with UNIX and Windows

ActionMS Windows CommandUNIX Command
createmd foldermkdir folder
deleterd folderrmdir folder
renamerename oldname newnamemv oldname newname

File and Directory Access Control

The network administrator is strongly advised to read foundational training manuals and reference materials regarding file and directory permissions maintenance. Much can be achieved with the basic UNIX permissions without having to resort to more complex facilities like POSIX Access Control Lists (ACLs) or Extended Attributes (EAs).

UNIX/Linux file and directory access permissions involves setting three primary sets of data and one control set. A UNIX file listing looks as follows:

$ ls -la
total 632
drwxr-xr-x   13 maryo   gnomes      816 2003-05-12 22:56 .
drwxrwxr-x   37 maryo   gnomes     3800 2003-05-12 22:29 ..
dr-xr-xr-x    2 maryo   gnomes       48 2003-05-12 22:29 muchado02
drwxrwxrwx    2 maryo   gnomes       48 2003-05-12 22:29 muchado03
drw-rw-rw-    2 maryo   gnomes       48 2003-05-12 22:29 muchado04
d-w--w--w-    2 maryo   gnomes       48 2003-05-12 22:29 muchado05
dr--r--r--    2 maryo   gnomes       48 2003-05-12 22:29 muchado06
drwsrwsrwx    2 maryo   gnomes       48 2003-05-12 22:29 muchado08
----------    1 maryo   gnomes     1242 2003-05-12 22:31 mydata00.lst
--w--w--w-    1 maryo   gnomes     7754 2003-05-12 22:33 mydata02.lst
-r--r--r--    1 maryo   gnomes    21017 2003-05-12 22:32 mydata04.lst
-rw-rw-rw-    1 maryo   gnomes    41105 2003-05-12 22:32 mydata06.lst
$ 

The columns above represent (from left to right): permissions, number of hard links to file, owner, group, size (bytes), access date, access time, file name.

An overview of the permissions field can be found in .

Figure 13.1. Overview of UNIX permissions field.

Overview of UNIX permissions field.

Any bit flag may be unset. An unset bit flag is the equivalent of “cannot” and is represented as a “-” character.

Example 13.1. Example File

		-rwxr-x---   Means: The owner (user) can read, write, execute
		                    the group can read and execute
		                    everyone else cannot do anything with it.
		

Additional possibilities in the [type] field are: c = character device, b = block device, p = pipe device, s = UNIX Domain Socket.

The letters rwxXst set permissions for the user, group and others as: read (r), write (w), execute (or access for directories) (x), execute only if the file is a directory or already has execute permission for some user (X), set user or group ID on execution (s), sticky (t).

When the sticky bit is set on a directory, files in that directory may be unlinked (deleted) or renamed only by root or their owner. Without the sticky bit, anyone able to write to the directory can delete or rename files. The sticky bit is commonly found on directories, such as /tmp, that are world-writable.

When the set user or group ID bit (s) is set on a directory, then all files created within it will be owned by the user and/or group whose `set user or group' bit is set. This can be helpful in setting up directories for which it is desired that all users who are in a group should be able to write to and read from a file, particularly when it is undesirable for that file to be exclusively owned by a user whose primary group is not the group that all such users belong to.

When a directory is set drw-r----- this means that the owner can read and create (write) files in it, but because the (x) execute flags are not set, files cannot be listed (seen) in the directory by anyone. The group can read files in the directory but cannot create new files. If files in the directory are set to be readable and writable for the group, then group members will be able to write to (or delete) them.

Share Definition Access Controls

The following parameters in the smb.conf file sections define a share control or effect access controls. Before using any of the following options, please refer to the man page for smb.conf.

User and Group-Based Controls

User and group-based controls can prove quite useful. In some situations it is distinctly desirable to affect all file system operations as if a single user were doing so. The use of the force user and force group behavior will achieve this. In other situations it may be necessary to effect a paranoia level of control to ensure that only particular authorized persons will be able to access a share or its contents. Here the use of the valid users or the invalid users may be most useful.

As always, it is highly advisable to use the least difficult to maintain and the least ambiguous method for controlling access. Remember, when you leave the scene someone else will need to provide assistance and if he finds too great a mess or does not understand what you have done, there is risk of Samba being removed and an alternative solution being adopted.

enumerates these controls.

Table 13.2. User and Group Based Controls

Control ParameterDescription - Action - Notes
admin users

List of users who will be granted administrative privileges on the share. They will do all file operations as the super-user (root). Any user in this list will be able to do anything they like on the share, irrespective of file permissions.

force group

Specifies a UNIX group name that will be assigned as the default primary group for all users connecting to this service.

force user

Specifies a UNIX user name that will be assigned as the default user for all users connecting to this service. This is useful for sharing files. Incorrect use can cause security problems.

guest ok

If this parameter is set for a service, then no password is required to connect to the service. Privileges will be those of the guest account.

invalid users

List of users that should not be allowed to login to this service.

only user

Controls whether connections with usernames not in the user list will be allowed.

read list

List of users that are given read-only access to a service. Users in this list will not be given write access, no matter what the read only option is set to.

username

Refer to the smb.conf man page for more information -- this is a complex and potentially misused parameter.

valid users

List of users that should be allowed to login to this service.

write list

List of users that are given read-write access to a service.

File and Directory Permissions-Based Controls

The following file and directory permission-based controls, if misused, can result in considerable difficulty to diagnose causes of misconfiguration. Use them sparingly and carefully. By gradually introducing each one by one, undesirable side effects may be detected. In the event of a problem, always comment all of them out and then gradually reintroduce them in a controlled way.

Refer to for information regarding the parameters that may be used to affect file and directory permission-based access controls.

Table 13.3. File and Directory Permission Based Controls

Control ParameterDescription - Action - Notes
create mask

Refer to the smb.conf man page.

directory mask

The octal modes used when converting DOS modes to UNIX modes when creating UNIX directories. See also: directory security mask.

dos filemode

Enabling this parameter allows a user who has write access to the file to modify the permissions on it.

force create mode

This parameter specifies a set of UNIX mode bit permissions that will always be set on a file created by Samba.

force directory mode

This parameter specifies a set of UNIX mode bit permissions that will always be set on a directory created by Samba.

force directory security mode

Controls UNIX permission bits modified when a Windows NT client is manipulating UNIX permissions on a directory.

force security mode

Controls UNIX permission bits modified when a Windows NT client manipulates UNIX permissions.

hide unreadable

Prevents clients from seeing the existence of files that cannot be read.

hide unwriteable files

Prevents clients from seeing the existence of files that cannot be written to. Unwriteable directories are shown as usual.

nt acl support

This parameter controls whether smbd will attempt to map UNIX permissions into Windows NT access control lists.

security mask

Controls UNIX permission bits modified when a Windows NT client is manipulating the UNIX permissions on a file.

Miscellaneous Controls

The following are documented because of the prevalence of administrators creating inadvertent barriers to file access by not understanding the full implications of smb.conf file settings. See .

Table 13.4. Other Controls

Control ParameterDescription - Action - Notes
case sensitive, default case, short preserve case

This means that all file name lookup will be done in a case sensitive manner. Files will be created with the precise file name Samba received from the MS Windows client.

csc policy

Client Side Caching Policy - parallels MS Windows client side file caching capabilities.

dont descend

Allows specifying a comma-delimited list of directories that the server should always show as empty.

dos filetime resolution

This option is mainly used as a compatibility option for Visual C++ when used against Samba shares.

dos filetimes

DOS and Windows allow users to change file time stamps if they can write to the file. POSIX semantics prevent this. This option allows DOS and Windows behavior.

fake oplocks

Oplocks are the way that SMB clients get permission from a server to locally cache file operations. If a server grants an oplock, the client is free to assume that it is the only one accessing the file and it will aggressively cache file data.

hide dot files, hide files, veto files

Note: MS Windows Explorer allows over-ride of files marked as hidden so they will still be visible.

read only

If this parameter is yes, then users of a service may not create or modify files in the service's directory.

veto files

List of files and directories that are neither visible nor accessible.

Access Controls on Shares

This section deals with how to configure Samba per share access control restrictions. By default, Samba sets no restrictions on the share itself. Restrictions on the share itself can be set on MS Windows NT4/200x/XP shares. This can be an effective way to limit who can connect to a share. In the absence of specific restrictions the default setting is to allow the global user Everyone - Full Control (full control, change and read).

At this time Samba does not provide a tool for configuring access control setting on the share itself. Samba does have the capacity to store and act on access control settings, but the only way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for Computer Management.

Samba stores the per share access control settings in a file called share_info.tdb. The location of this file on your system will depend on how Samba was compiled. The default location for Samba's tdb files is under /usr/local/samba/var. If the tdbdump utility has been compiled and installed on your system, then you can examine the contents of this file by executing: tdbdump share_info.tdb in the directory containing the tdb files.

Share Permissions Management

The best tool for the task is platform dependant. Choose the best tool for your environment.

Windows NT4 Workstation/Server

The tool you need to use to manage share permissions on a Samba server is the NT Server Manager. Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation. You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft see details below.

Procedure 13.1. Instructions

  1. Launch the NT4 Server Manager, click on the Samba server you want to administer. From the menu select Computer, then click on Shared Directories.

  2. Click on the share that you wish to manage, then click the Properties tab. then click the Permissions tab. Now you can add or change access control settings as you wish.

Windows 200x/XP

On MS Windows NT4/200x/XP system access control lists on the share itself are set using native tools, usually from File Manager. For example, in Windows 200x, right click on the shared folder, then select Sharing, then click on Permissions. The default Windows NT4/200x permission allows “Everyone” full control on the share.

MS Windows 200x and later versions come with a tool called the Computer Management snap-in for the Microsoft Management Console (MMC). This tool is located by clicking on Control Panel -> Administrative Tools -> Computer Management.

Procedure 13.2. Instructions

  1. After launching the MMC with the Computer Management snap-in, click the menu item Action, and select Connect to another computer. If you are not logged onto a domain you will be prompted to enter a domain login user identifier and a password. This will authenticate you to the domain. If you are already logged in with administrative privilege, this step is not offered.

  2. If the Samba server is not shown in the Select Computer box, type in the name of the target Samba server in the field Name:. Now click the on [+] next to System Tools, then on the [+] next to Shared Folders in the left panel.

  3. In the right panel, double-click on the share on which you wish to set access control permissions. Then click the tab Share Permissions. It is now possible to add access control entities to the shared folder. Remember to set what type of access (full control, change, read) you wish to assign for each entry.

Warning

Be careful. If you take away all permissions from the Everyone user without removing this user, effectively no user will be able to access the share. This is a result of what is known as ACL precedence. Everyone with no access means that MaryK who is part of the group Everyone will have no access even if she is given explicit full control access.

MS Windows Access Control Lists and UNIX Interoperability

Managing UNIX Permissions Using NT Security Dialogs

Windows NT clients can use their native security settings dialog box to view and modify the underlying UNIX permissions.

This ability is careful not to compromise the security of the UNIX host on which Samba is running, and still obeys all the file permission rules that a Samba administrator can set.

Samba does not attempt to go beyond POSIX ACLs, so the various finer-grained access control options provided in Windows are actually ignored.

Note

All access to UNIX/Linux system files via Samba is controlled by the operating system file access controls. When trying to figure out file access problems, it is vitally important to find the identity of the Windows user as it is presented by Samba at the point of file access. This can best be determined from the Samba log files.

Viewing File Security on a Samba Share

From an NT4/2000/XP client, right click on any file or directory in a Samba-mounted drive letter or UNC path. When the menu pops up, click on the Properties entry at the bottom of the menu. This brings up the file Properties dialog box. Click on the Security tab and you will see three buttons: Permissions, Auditing, and Ownership. The Auditing button will cause either an error message `A requested privilege is not held by the client' to appear if the user is not the NT Administrator, or a dialog which is intended to allow an Administrator to add auditing requirements to a file if the user is logged on as the NT Administrator. This dialog is non-functional with a Samba share at this time, as the only useful button, the Add button, will not currently allow a list of users to be seen.

Viewing File Ownership

Clicking on the Ownership button brings up a dialog box telling you who owns the given file. The owner name will be displayed like this:

SERVER\user (Long name)

SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database). Click on the Close button to remove this dialog.

If the parameter nt acl support is set to false, the file owner will be shown as the NT user Everyone.

The Take Ownership button will not allow you to change the ownership of this file to yourself (clicking it will display a dialog box complaining that the user you are currently logged onto the NT client cannot be found). The reason for this is that changing the ownership of a file is a privileged operation in UNIX, available only to the root user. As clicking on this button causes NT to attempt to change the ownership of a file to the current user logged into the NT clienti, this will not work with Samba at this time.

There is an NT chown command that will work with Samba and allow a user with Administrator privilege connected to a Samba server as root to change the ownership of files on both a local NTFS filesystem or remote mounted NTFS or Samba drive. This is available as part of the Seclib NT security library written by Jeremy Allison of the Samba Team, and is available from the main Samba FTP site.

Viewing File or Directory Permissions

The third button is the Permissions button. Clicking on this brings up a dialog box that shows both the permissions and the UNIX owner of the file or directory. The owner is displayed like this:

SERVER\ user (Long name)

Where SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database).

If the parameter nt acl support is set to false, the file owner will be shown as the NT user Everyone and the permissions will be shown as NT “Full Control”.

The permissions field is displayed differently for files and directories, so I'll describe the way file permissions are displayed first.

File Permissions

The standard UNIX user/group/world triplet and the corresponding read, write, execute permissions triplets are mapped by Samba into a three element NT ACL with the “r”, “w” and “x” bits mapped into the corresponding NT permissions. The UNIX world permissions are mapped into the global NT group Everyone, followed by the list of permissions allowed for UNIX world. The UNIX owner and group permissions are displayed as an NT user icon and an NT local group icon, respectively, followed by the list of permissions allowed for the UNIX user and group.

Because many UNIX permission sets do not map into common NT names such as read, change or full control, usually the permissions will be prefixed by the words Special Access in the NT display list.

But what happens if the file has no permissions allowed for a particular UNIX user group or world component? In order to allow “no permissions” to be seen and modified Samba then overloads the NT Take Ownership ACL attribute (which has no meaning in UNIX) and reports a component with no permissions as having the NT O bit set. This was chosen, of course, to make it look like a zero, meaning zero permissions. More details on the decision behind this is given below.

Directory Permissions

Directories on an NT NTFS file system have two different sets of permissions. The first set is the ACL set on the directory itself, which is usually displayed in the first set of parentheses in the normal RW NT style. This first set of permissions is created by Samba in exactly the same way as normal file permissions are, described above, and is displayed in the same way.

The second set of directory permissions has no real meaning in the UNIX permissions world and represents the inherited permissions that any file created within this directory would inherit.

Samba synthesises these inherited permissions for NT by returning as an NT ACL the UNIX permission mode that a new file created by Samba on this share would receive.

Modifying File or Directory Permissions

Modifying file and directory permissions is as simple as changing the displayed permissions in the dialog box, and clicking on OK. However, there are limitations that a user needs to be aware of, and also interactions with the standard Samba permission masks and mapping of DOS attributes that need to also be taken into account.

If the parameter nt acl support is set to false, any attempt to set security permissions will fail with an `Access Denied' message.

The first thing to note is that the Add button will not return a list of users in Samba (it will give an error message saying `The remote procedure call failed and did not execute'). This means that you can only manipulate the current user/group/world permissions listed in the dialog box. This actually works quite well as these are the only permissions that UNIX actually has.

If a permission triplet (either user, group, or world) is removed from the list of permissions in the NT dialog box, then when the OK button is pressed it will be applied as “no permissions” on the UNIX side. If you then view the permissions again, the “no permissions” entry will appear as the NT O flag, as described above. This allows you to add permissions back to a file or directory once you have removed them from a triplet component.

As UNIX supports only the “r”, “w” and “x” bits of an NT ACL, if other NT security attributes such as Delete Access are selected they will be ignored when applied on the Samba server.

When setting permissions on a directory, the second set of permissions (in the second set of parentheses) is by default applied to all files within that directory. If this is not what you want, you must uncheck the Replace permissions on existing files checkbox in the NT dialog before clicking on OK.

If you wish to remove all permissions from a user/group/world component, you may either highlight the component and click on the Remove button, or set the component to only have the special Take Ownership permission (displayed as O ) highlighted.

Interaction with the Standard Samba “create mask” Parameters

There are four parameters that control interaction with the standard Samba create mask parameters. These are:

  • security mask
  • force security mode
  • directory security mask
  • force directory security mode

Once a user clicks on OK to apply the permissions, Samba maps the given permissions into a user/group/world r/w/x triplet set, and then checks the changed permissions for a file against the bits set in the security mask parameter. Any bits that were changed that are not set to “1” in this parameter are left alone in the file permissions.

Essentially, zero bits in the security mask may be treated as a set of bits the user is not allowed to change, and one bits are those the user is allowed to change.

If not explicitly set, this parameter defaults to the same value as the create mask parameter. To allow a user to modify all the user/group/world permissions on a file, set this parameter to 0777.

Next Samba checks the changed permissions for a file against the bits set in the force security mode parameter. Any bits that were changed that correspond to bits set to “1” in this parameter are forced to be set.

Essentially, bits set in the force security mode parameter may be treated as a set of bits that, when modifying security on a file, the user has always set to be “on”.

If not explicitly set, this parameter defaults to the same value as the force create mode parameter. To allow a user to modify all the user/group/world permissions on a file with no restrictions set this parameter to 000. The security mask and force security mode parameters are applied to the change request in that order.

For a directory, Samba will perform the same operations as described above for a file except it uses the parameter directory security mask instead of security mask, and force directory security mode parameter instead of force security mode .

The directory security mask parameter by default is set to the same value as the directory mask parameter and the force directory security mode parameter by default is set to the same value as the force directory mode parameter. In this way Samba enforces the permission restrictions that an administrator can set on a Samba share, while still allowing users to modify the permission bits within that restriction.

If you want to set up a share that allows users full control in modifying the permission bits on their files and directories and does not force any particular bits to be set “on”, then set the following parameters in the smb.conf file in that share-specific section:

security mask = 0777
force security mode = 0
directory security mask = 0777
force directory security mode = 0

Interaction with the Standard Samba File Attribute Mapping

Note

Samba maps some of the DOS attribute bits (such as “read only”) into the UNIX permissions of a file. This means there can be a conflict between the permission bits set via the security dialog and the permission bits set by the file attribute mapping.

If a file has no UNIX read access for the owner, it will show up as “read only” in the standard file attributes tabbed dialog. Unfortunately, this dialog is the same one that contains the security information in another tab.

What this can mean is that if the owner changes the permissions to allow himself read access using the security dialog, clicks on OK to get back to the standard attributes tab dialog, and clicks on OK on that dialog, then NT will set the file permissions back to read-only (as that is what the attributes still say in the dialog). This means that after setting permissions and clicking on OK to get back to the attributes dialog, you should always press Cancel rather than OK to ensure that your changes are not overridden.

Common Errors

File, directory and share access problems are common on the mailing list. The following are examples taken from the mailing list in recent times.

Users Cannot Write to a Public Share

We are facing some troubles with file/directory permissions. I can log on the domain as admin user(root), and there's a public share on which everyone needs to have permission to create/modify files, but only root can change the file, no one else can. We need to constantly go to the server to chgrp -R users * and chown -R nobody * to allow others users to change the file.

There are many ways to solve this problem and here are a few hints:

  1. Go to the top of the directory that is shared.

  2. Set the ownership to what ever public owner and group you want

    $ find 'directory_name' -type d -exec chown user.group {}\;
    $ find 'directory_name' -type d -exec chmod 6775 'directory_name'
    $ find 'directory_name' -type f -exec chmod 0775 {} \;
    $ find 'directory_name' -type f -exec chown user.group {}\;
    

    Note

    The above will set the sticky bit on all directories. Read your UNIX/Linux man page on what that does. It causes the OS to assign to all files created in the directories the ownership of the directory.

  3. Directory is: /foodbar

    $ chown jack.engr /foodbar
    

    Note

    This is the same as doing:

    $ chown jack /foodbar
    $ chgrp engr /foodbar
    

  4. Now type:

    $ chmod 6775 /foodbar
    $ ls -al /foodbar/..
    

    You should see:

    drwsrwsr-x  2 jack  engr    48 2003-02-04 09:55 foodbar
    

  5. Now type:

    $ su - jill
    $ cd /foodbar
    $ touch Afile
    $ ls -al
    

    You should see that the file Afile created by Jill will have ownership and permissions of Jack, as follows:

    -rw-r--r--  1 jack  engr     0 2003-02-04 09:57 Afile
    

  6. Now in your smb.conf for the share add:

    force create mode = 0775
    force direcrtory mode = 6775

    Note

    These procedures are needed only if your users are not members of the group you have used. That is if within the OS do not have write permission on the directory.

    An alternative is to set in the smb.conf entry for the share:

    force user = jack
    force group = engr

File Operations Done as root with force user Set

When you have a user in admin users, Samba will always do file operations for this user as root, even if force user has been set.

MS Word with Samba Changes Owner of File

Question:When user B saves a word document that is owned by user A the updated file is now owned by user B. Why is Samba doing this? How do I fix this?

Answer: Word does the following when you modify/change a Word document: MS Word creates a NEW document with a temporary name, Word then closes the old document and deletes it, Word then renames the new document to the original document name. There is no mechanism by which Samba can in any way know that the new document really should be owned by the owners of the original file. Samba has no way of knowing that the file will be renamed by MS Word. As far as Samba is able to tell, the file that gets created is a NEW file, not one that the application (Word) is updating.

There is a work-around to solve the permissions problem. That work-around involves understanding how you can manage file system behavior from within the smb.conf file, as well as understanding how UNIX file systems work. Set on the directory in which you are changing Word documents: chmod g+s `directory_name' This ensures that all files will be created with the group that owns the directory. In smb.conf share declaration section set:

force create mode = 0660
force directory mode = 0770

These two settings will ensure that all directories and files that get created in the share will be read/writable by the owner and group set on the directory itself.

Chapter 14. File and Record Locking

Jeremy Allison

Samba Team

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Eric Roseme

HP Oplocks Usage Recommendations Whitepaper

One area that causes trouble for many network administrators is locking. The extent of the problem is readily evident from searches over the Internet.

Features and Benefits

Samba provides all the same locking semantics that MS Windows clients expect and that MS Windows NT4/200x servers also provide.

The term locking has exceptionally broad meaning and covers a range of functions that are all categorized under this one term.

Opportunistic locking is a desirable feature when it can enhance the perceived performance of applications on a networked client. However, the opportunistic locking protocol is not robust and, therefore, can encounter problems when invoked beyond a simplistic configuration or on extended slow or faulty networks. In these cases, operating system management of opportunistic locking and/or recovering from repetitive errors can offset the perceived performance advantage that it is intended to provide.

The MS Windows network administrator needs to be aware that file and record locking semantics (behavior) can be controlled either in Samba or by way of registry settings on the MS Windows client.

Note

Sometimes it is necessary to disable locking control settings on both the Samba server as well as on each MS Windows client!

Discussion

There are two types of locking that need to be performed by an SMB server. The first is record locking that allows a client to lock a range of bytes in a open file. The second is the deny modes that are specified when a file is open.

Record locking semantics under UNIX are very different from record locking under Windows. Versions of Samba before 2.2 have tried to use the native fcntl() UNIX system call to implement proper record locking between different Samba clients. This cannot be fully correct for several reasons. The simplest is the fact that a Windows client is allowed to lock a byte range up to 2^32 or 2^64, depending on the client OS. The UNIX locking only supports byte ranges up to 2^31. So it is not possible to correctly satisfy a lock request above 2^31. There are many more differences, too many to be listed here.

Samba 2.2 and above implements record locking completely independent of the underlying UNIX system. If a byte range lock that the client requests happens to fall into the range of 0-2^31, Samba hands this request down to the UNIX system. All other locks cannot be seen by UNIX, anyway.

Strictly speaking, an SMB server should check for locks before every read and write call on a file. Unfortunately with the way fcntl() works, this can be slow and may overstress the rpc.lockd. This is almost always unnecessary as clients are supposed to independently make locking calls before reads and writes if locking is important to them. By default, Samba only makes locking calls when explicitly asked to by a client, but if you set strict locking = yes, it will make lock checking calls on every read and write call.

You can also disable byte range locking completely by using locking = no. This is useful for those shares that do not support locking or do not need it (such as CDROMs). In this case, Samba fakes the return codes of locking calls to tell clients that everything is okay.

The second class of locking is the deny modes. These are set by an application when it opens a file to determine what types of access should be allowed simultaneously with its open. A client may ask for DENY_NONE, DENY_READ, DENY_WRITE, or DENY_ALL. There are also special compatibility modes called DENY_FCB and DENY_DOS.

Opportunistic Locking Overview

Opportunistic locking (Oplocks) is invoked by the Windows file system (as opposed to an API) via registry entries (on the server and the client) for the purpose of enhancing network performance when accessing a file residing on a server. Performance is enhanced by caching the file locally on the client that allows:

Read-ahead:

The client reads the local copy of the file, eliminating network latency.

Write caching:

The client writes to the local copy of the file, eliminating network latency.

Lock caching:

The client caches application locks locally, eliminating network latency.

The performance enhancement of oplocks is due to the opportunity of exclusive access to the file even if it is opened with deny-none because Windows monitors the file's status for concurrent access from other processes.

Windows defines 4 kinds of Oplocks:

Level1 Oplock

The redirector sees that the file was opened with deny none (allowing concurrent access), verifies that no other process is accessing the file, checks that oplocks are enabled, then grants deny-all/read-write/exclusive access to the file. The client now performs operations on the cached local file.

If a second process attempts to open the file, the open is deferred while the redirector “breaks” the original oplock. The oplock break signals the caching client to write the local file back to the server, flush the local locks and discard read-ahead data. The break is then complete, the deferred open is granted, and the multiple processes can enjoy concurrent file access as dictated by mandatory or byte-range locking options. However, if the original opening process opened the file with a share mode other than deny-none, then the second process is granted limited or no access, despite the oplock break.

Level2 Oplock

Performs like a Level1 oplock, except caching is only operative for reads. All other operations are performed on the server disk copy of the file.

Filter Oplock

Does not allow write or delete file access.

Batch Oplock

Manipulates file openings and closings and allows caching of file attributes.

An important detail is that oplocks are invoked by the file system, not an application API. Therefore, an application can close an oplocked file, but the file system does not relinquish the oplock. When the oplock break is issued, the file system then simply closes the file in preparation for the subsequent open by the second process.

Opportunistic locking is actually an improper name for this feature. The true benefit of this feature is client-side data caching, and oplocks is merely a notification mechanism for writing data back to the networked storage disk. The limitation of opportunistic locking is the reliability of the mechanism to process an oplock break (notification) between the server and the caching client. If this exchange is faulty (usually due to timing out for any number of reasons), then the client-side caching benefit is negated.

The actual decision that a user or administrator should consider is whether it is sensible to share among multiple users data that will be cached locally on a client. In many cases the answer is no. Deciding when to cache or not cache data is the real question, and thus “opportunistic locking” should be treated as a toggle for client-side caching. Turn it “on” when client-side caching is desirable and reliable. Turn it “off” when client-side caching is redundant, unreliable or counter-productive.

Opportunistic locking is by default set to “on” by Samba on all configured shares, so careful attention should be given to each case to determine if the potential benefit is worth the potential for delays. The following recommendations will help to characterize the environment where opportunistic locking may be effectively configured.

Windows opportunistic locking is a lightweight performance-enhancing feature. It is not a robust and reliable protocol. Every implementation of opportunistic locking should be evaluated as a tradeoff between perceived performance and reliability. Reliability decreases as each successive rule above is not enforced. Consider a share with oplocks enabled, over a wide area network, to a client on a South Pacific atoll, on a high-availability server, serving a mission-critical multi-user corporate database during a tropical storm. This configuration will likely encounter problems with oplocks.

Oplocks can be beneficial to perceived client performance when treated as a configuration toggle for client-side data caching. If the data caching is likely to be interrupted, then oplock usage should be reviewed. Samba enables opportunistic locking by default on all shares. Careful attention should be given to the client usage of shared data on the server, the server network reliability and the opportunistic locking configuration of each share. In mission critical high availability environments, data integrity is often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

Windows client failover behavior is more at risk of application interruption than other platforms because it is dependent upon an established TCP transport connection. If the connection is interrupted as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover correctly from a transport connection loss, therefore, most applications will experience some sort of interruption at worst, abort and require restarting.

If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the application restarts or recovers from the TCP interrupt. When the TCP connection drops, the client state is lost. When the file server recovers, an oplock break is not sent to the client. In this case, the work from the prior session is lost. Observing this scenario with oplocks disabled and with the client writing data to the file server real-time, the failover will provide the data on disk as it existed at the time of the disconnect.

In mission-critical high-availability environments, careful attention should be given to opportunistic locking. Ideally, comprehensive testing should be done with all affected applications with oplocks enabled and disabled.

Exclusively Accessed Shares

Opportunistic locking is most effective when it is confined to shares that are exclusively accessed by a single user, or by only one user at a time. Because the true value of opportunistic locking is the local client caching of data, any operation that interrupts the caching mechanism will cause a delay.

Home directories are the most obvious examples of where the performance benefit of opportunistic locking can be safely realized.

Multiple-Accessed Shares or Files

As each additional user accesses a file in a share with opportunistic locking enabled, the potential for delays and resulting perceived poor performance increases. When multiple users are accessing a file on a share that has oplocks enabled, the management impact of sending and receiving oplock breaks and the resulting latency while other clients wait for the caching client to flush data offset the performance gains of the caching user.

As each additional client attempts to access a file with oplocks set, the potential performance improvement is negated and eventually results in a performance bottleneck.

UNIX or NFS Client-Accessed Files

Local UNIX and NFS clients access files without a mandatory file-locking mechanism. Thus, these client platforms are incapable of initiating an oplock break request from the server to a Windows client that has a file cached. Local UNIX or NFS file access can therefore write to a file that has been cached by a Windows client, which exposes the file to likely data corruption.

If files are shared between Windows clients, and either local UNIX or NFS users, turn opportunistic locking off.

Slow and/or Unreliable Networks

The biggest potential performance improvement for opportunistic locking occurs when the client-side caching of reads and writes delivers the most differential over sending those reads and writes over the wire. This is most likely to occur when the network is extremely slow, congested, or distributed (as in a WAN). However, network latency also has a high impact on the reliability of the oplock break mechanism, and thus increases the likelihood of encountering oplock problems that more than offset the potential perceived performance gain. Of course, if an oplock break never has to be sent, then this is the most advantageous scenario to utilize opportunistic locking.

If the network is slow, unreliable, or a WAN, then do not configure opportunistic locking if there is any chance of multiple users regularly opening the same file.

Multi-User Databases

Multi-user databases clearly pose a risk due to their very nature they are typically heavily accessed by numerous users at random intervals. Placing a multi-user database on a share with opportunistic locking enabled will likely result in a locking management bottleneck on the Samba server. Whether the database application is developed in-house or a commercially available product, ensure that the share has opportunistic locking disabled.

PDM Data Shares

Process Data Management (PDM) applications such as IMAN, Enovia and Clearcase are increasing in usage with Windows client platforms, and therefore SMB datastores. PDM applications manage multi-user environments for critical data security and access. The typical PDM environment is usually associated with sophisticated client design applications that will load data locally as demanded. In addition, the PDM application will usually monitor the data-state of each client. In this case, client-side data caching is best left to the local application and PDM server to negotiate and maintain. It is appropriate to eliminate the client OS from any caching tasks, and the server from any oplock management, by disabling opportunistic locking on the share.

Beware of Force User

Samba includes an smb.conf parameter called force user that changes the user accessing a share from the incoming user to whatever user is defined by the smb.conf variable. If opportunistic locking is enabled on a share, the change in user access causes an oplock break to be sent to the client, even if the user has not explicitly loaded a file. In cases where the network is slow or unreliable, an oplock break can become lost without the user even accessing a file. This can cause apparent performance degradation as the client continually reconnects to overcome the lost oplock break.

Avoid the combination of the following:

  • force user in the smb.conf share configuration.

  • Slow or unreliable networks

  • Opportunistic locking enabled

Advanced Samba Opportunistic Locking Parameters

Samba provides opportunistic locking parameters that allow the administrator to adjust various properties of the oplock mechanism to account for timing and usage levels. These parameters provide good versatility for implementing oplocks in environments where they would likely cause problems. The parameters are: oplock break wait time, oplock contention limit.

For most users, administrators and environments, if these parameters are required, then the better option is to simply turn oplocks off. The Samba SWAT help text for both parameters reads: “Do not change this parameter unless you have read and understood the Samba oplock code.” This is good advice.

Mission-Critical High-Availability

In mission-critical high-availability environments, data integrity is often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

Windows client failover behavior is more at risk of application interruption than other platforms because it is dependant upon an established TCP transport connection. If the connection is interrupted as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover correctly from a transport connection loss, therefore, most applications will experience some sort of interruption at worst, abort and require restarting.

If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the application restarts, or recovers from the TCP interrupt. When the TCP connection drops, the client state is lost. When the file server recovers, an oplock break is not sent to the client. In this case, the work from the prior session is lost. Observing this scenario with oplocks disabled, and the client was writing data to the file server real-time, then the failover will provide the data on disk as it existed at the time of the disconnect.

In mission-critical high-availability environments, careful attention should be given to opportunistic locking. Ideally, comprehensive testing should be done with all effected applications with oplocks enabled and disabled.

Samba Opportunistic Locking Control

Opportunistic locking is a unique Windows file locking feature. It is not really file locking, but is included in most discussions of Windows file locking, so is considered a de facto locking feature. Opportunistic locking is actually part of the Windows client file caching mechanism. It is not a particularly robust or reliable feature when implemented on the variety of customized networks that exist in enterprise computing.

Like Windows, Samba implements opportunistic locking as a server-side component of the client caching mechanism. Because of the lightweight nature of the Windows feature design, effective configuration of opportunistic locking requires a good understanding of its limitations, and then applying that understanding when configuring data access for each particular customized network and client usage state.

Opportunistic locking essentially means that the client is allowed to download and cache a file on their hard drive while making changes; if a second client wants to access the file, the first client receives a break and must synchronize the file back to the server. This can give significant performance gains in some cases; some programs insist on synchronizing the contents of the entire file back to the server for a single change.

Level1 Oplocks (also known as just plain “oplocks”) is another term for opportunistic locking.

Level2 Oplocks provides opportunistic locking for a file that will be treated as read only. Typically this is used on files that are read-only or on files that the client has no initial intention to write to at time of opening the file.

Kernel Oplocks are essentially a method that allows the Linux kernel to co-exist with Samba's oplocked files, although this has provided better integration of MS Windows network file locking with the underlying OS, SGI IRIX and Linux are the only two OSs that are oplock-aware at this time.

Unless your system supports kernel oplocks, you should disable oplocks if you are accessing the same files from both UNIX/Linux and SMB clients. Regardless, oplocks should always be disabled if you are sharing a database file (e.g., Microsoft Access) between multiple clients, as any break the first client receives will affect synchronization of the entire file (not just the single record), which will result in a noticeable performance impairment and, more likely, problems accessing the database in the first place. Notably, Microsoft Outlook's personal folders (*.pst) react quite badly to oplocks. If in doubt, disable oplocks and tune your system from that point.

If client-side caching is desirable and reliable on your network, you will benefit from turning on oplocks. If your network is slow and/or unreliable, or you are sharing your files among other file sharing mechanisms (e.g., NFS) or across a WAN, or multiple people will be accessing the same files frequently, you probably will not benefit from the overhead of your client sending oplock breaks and will instead want to disable oplocks for the share.

Another factor to consider is the perceived performance of file access. If oplocks provide no measurable speed benefit on your network, it might not be worth the hassle of dealing with them.

Example Configuration

In the following section we examine two distinct aspects of Samba locking controls.

Disabling Oplocks

You can disable oplocks on a per-share basis with the following:

[acctdata]
oplocks = False
level2 oplocks = False

The default oplock type is Level1. Level2 oplocks are enabled on a per-share basis in the smb.conf file.

Alternately, you could disable oplocks on a per-file basis within the share:

veto oplock files = /*.mdb/*.MDB/*.dbf/*.DBF/

If you are experiencing problems with oplocks as apparent from Samba's log entries, you may want to play it safe and disable oplocks and Level2 oplocks.

Disabling Kernel Oplocks

Kernel oplocks is an smb.conf parameter that notifies Samba (if the UNIX kernel has the capability to send a Windows client an oplock break) when a UNIX process is attempting to open the file that is cached. This parameter addresses sharing files between UNIX and Windows with oplocks enabled on the Samba server: the UNIX process can open the file that is Oplocked (cached) by the Windows client and the smbd process will not send an oplock break, which exposes the file to the risk of data corruption. If the UNIX kernel has the ability to send an oplock break, then the kernel oplocks parameter enables Samba to send the oplock break. Kernel oplocks are enabled on a per-server basis in the smb.conf file.

kernel oplocks = yes

The default is no.

Veto opLocks is an smb.conf parameter that identifies specific files for which oplocks are disabled. When a Windows client opens a file that has been configured for veto oplocks, the client will not be granted the oplock, and all operations will be executed on the original file on disk instead of a client-cached file copy. By explicitly identifying files that are shared with UNIX processes and disabling oplocks for those files, the server-wide Oplock configuration can be enabled to allow Windows clients to utilize the performance benefit of file caching without the risk of data corruption. Veto Oplocks can be enabled on a per-share basis, or globally for the entire server, in the smb.conf file as shown in .

Example 14.1. Share with some files oplocked

[global]
veto oplock files = /filename.htm/*.txt/
[share_name]
veto oplock files = /*.exe/filename.ext/

oplock break wait time is an smb.conf parameter that adjusts the time interval for Samba to reply to an oplock break request. Samba recommends: “Do not change this parameter unless you have read and understood the Samba oplock code.” Oplock break Wait Time can only be configured globally in the smb.conf file as shown below.

oplock break wait time = 0 (default)

Oplock break contention limit is an smb.conf parameter that limits the response of the Samba server to grant an oplock if the configured number of contending clients reaches the limit specified by the parameter. Samba recommends “Do not change this parameter unless you have read and understood the Samba oplock code.” Oplock break Contention Limit can be enable on a per-share basis, or globally for the entire server, in the smb.conf file as shown in .

Example 14.2. Configuration with oplock break contention limit

[global]
oplock break contention limit = 2 (default)
[share_name]
oplock break contention limit = 2 (default)

MS Windows Opportunistic Locking and Caching Controls

There is a known issue when running applications (like Norton Anti-Virus) on a Windows 2000/ XP workstation computer that can affect any application attempting to access shared database files across a network. This is a result of a default setting configured in the Windows 2000/XP operating system known as opportunistic locking. When a workstation attempts to access shared data files located on another Windows 2000/XP computer, the Windows 2000/XP operating system will attempt to increase performance by locking the files and caching information locally. When this occurs, the application is unable to properly function, which results in an “Access Denied” error message being displayed during network operations.

All Windows operating systems in the NT family that act as database servers for data files (meaning that data files are stored there and accessed by other Windows PCs) may need to have opportunistic locking disabled in order to minimize the risk of data file corruption. This includes Windows 9x/Me, Windows NT, Windows 200x, and Windows XP.

If you are using a Windows NT family workstation in place of a server, you must also disable opportunistic locking (oplocks) on that workstation. For example, if you use a PC with the Windows NT Workstation operating system instead of Windows NT Server, and you have data files located on it that are accessed from other Windows PCs, you may need to disable oplocks on that system.

The major difference is the location in the Windows registry where the values for disabling oplocks are entered. Instead of the LanManServer location, the LanManWorkstation location may be used.

You can verify (change or add, if necessary) this registry value using the Windows Registry Editor. When you change this registry value, you will have to reboot the PC to ensure that the new setting goes into effect.

The location of the client registry entry for opportunistic locking has changed in Windows 2000 from the earlier location in Microsoft Windows NT.

Note

Windows 2000 will still respect the EnableOplocks registry value used to disable oplocks in earlier versions of Windows.

You can also deny the granting of opportunistic locks by changing the following registry entries:

	HKEY_LOCAL_MACHINE\System\
		CurrentControlSet\Services\MRXSmb\Parameters\

		OplocksDisabled REG_DWORD 0 or 1
		Default: 0 (not disabled)

Note

The OplocksDisabled registry value configures Windows clients to either request or not request opportunistic locks on a remote file. To disable oplocks, the value of OplocksDisabled must be set to 1.

	HKEY_LOCAL_MACHINE\System\
		CurrentControlSet\Services\LanmanServer\Parameters

		EnableOplocks REG_DWORD 0 or 1
		Default: 1 (Enabled by Default)

		EnableOpLockForceClose REG_DWORD 0 or 1
		Default: 0 (Disabled by Default)

Note

The EnableOplocks value configures Windows-based servers (including Workstations sharing files) to allow or deny opportunistic locks on local files.

To force closure of open oplocks on close or program exit, EnableOpLockForceClose must be set to 1.

An illustration of how Level2 oplocks work:

  • Station 1 opens the file requesting oplock.

  • Since no other station has the file open, the server grants station 1 exclusive oplock.

  • Station 2 opens the file requesting oplock.

  • Since station 1 has not yet written to the file, the server asks station 1 to break to Level2 oplock.

  • Station 1 complies by flushing locally buffered lock information to the server.

  • Station 1 informs the server that it has Broken to Level2 Oplock (alternately, station 1 could have closed the file).

  • The server responds to station 2's open request, granting it Level2 oplock. Other stations can likewise open the file and obtain Level2 oplock.

  • Station 2 (or any station that has the file open) sends a write request SMB. The server returns the write response.

  • The server asks all stations that have the file open to break to none, meaning no station holds any oplock on the file. Because the workstations can have no cached writes or locks at this point, they need not respond to the break-to-none advisory; all they need do is invalidate locally cashed read-ahead data.

Workstation Service Entries

	\HKEY_LOCAL_MACHINE\System\
		CurrentControlSet\Services\LanmanWorkstation\Parameters

	UseOpportunisticLocking   REG_DWORD   0 or 1
	Default: 1 (true)

This indicates whether the redirector should use opportunistic-locking (oplock) performance enhancement. This parameter should be disabled only to isolate problems.

Server Service Entries

	\HKEY_LOCAL_MACHINE\System\
		CurrentControlSet\Services\LanmanServer\Parameters

	EnableOplocks   REG_DWORD   0 or 1
	Default: 1 (true)

This specifies whether the server allows clients to use oplocks on files. Oplocks are a significant performance enhancement, but have the potential to cause lost cached data on some networks, particularly wide area networks.

	MinLinkThroughput   REG_DWORD   0 to infinite bytes per second
	Default: 0

This specifies the minimum link throughput allowed by the server before it disables raw and opportunistic locks for this connection.

	MaxLinkDelay   REG_DWORD   0 to 100,000 seconds
	Default: 60

This specifies the maximum time allowed for a link delay. If delays exceed this number, the server disables raw I/O and opportunistic locking for this connection.

	OplockBreakWait   REG_DWORD   10 to 180 seconds
	Default: 35

This specifies the time that the server waits for a client to respond to an oplock break request. Smaller values can allow detection of crashed clients more quickly but can potentially cause loss of cached data.

Persistent Data Corruption

If you have applied all of the settings discussed in this chapter but data corruption problems and other symptoms persist, here are some additional things to check out.

We have credible reports from developers that faulty network hardware, such as a single faulty network card, can cause symptoms similar to read caching and data corruption. If you see persistent data corruption even after repeated reindexing, you may have to rebuild the data files in question. This involves creating a new data file with the same definition as the file to be rebuilt and transferring the data from the old file to the new one. There are several known methods for doing this that can be found in our Knowledge Base.

Common Errors

In some sites, locking problems surface as soon as a server is installed; in other sites locking problems may not surface for a long time. Almost without exception, when a locking problem does surface it will cause embarrassment and potential data corruption.

Over the past few years there have been a number of complaints on the Samba mailing lists that have claimed that Samba caused data corruption. Three causes have been identified so far:

  • Incorrect configuration of opportunistic locking (incompatible with the application being used. This is a common problem even where MS Windows NT4 or MS Windows 200x-based servers were in use. It is imperative that the software application vendors' instructions for configuration of file locking should be followed. If in doubt, disable oplocks on both the server and the client. Disabling of all forms of file caching on the MS Windows client may be necessary also.

  • Defective network cards, cables, or HUBs/Switched. This is generally a more prevalent factor with low cost networking hardware, although occasionally there have also been problems with incompatibilities in more up-market hardware.

  • There have been some random reports of Samba log files being written over data files. This has been reported by very few sites (about five in the past three years) and all attempts to reproduce the problem have failed. The Samba Team has been unable to catch this happening and thus has not been able to isolate any particular cause. Considering the millions of systems that use Samba, for the sites that have been affected by this as well as for the Samba Team this is a frustrating and a vexing challenge. If you see this type of thing happening, please create a bug report on Samba Bugzilla without delay. Make sure that you give as much information as you possibly can help isolate the cause and to allow replication of the problem (an essential step in problem isolation and correction).

locking.tdb Error Messages

We are seeing lots of errors in the Samba logs, like:

tdb(/usr/local/samba_2.2.7/var/locks/locking.tdb): rec_read bad magic
 0x4d6f4b61 at offset=36116
What do these mean? ”

This error indicated a corrupted tdb. Stop all instances of smbd, delete locking.tdb, and restart smbd.

Problems Saving Files in MS Office on Windows XP

This is a bug in Windows XP. More information can be found in Microsoft Knowledge Base article 812937.

Long Delays Deleting Files Over Network with XP SP1

It sometimes takes approximately 35 seconds to delete files over the network after XP SP1 has been applied.

This is a bug in Windows XP. More information can be found in Microsoft Knowledge Base article 811492.

Additional Reading

You may want to check for an updated version of this white paper on our Web site from time to time. Many of our white papers are updated as information changes. For those papers, the last edited date is always at the top of the paper.

Section of the Microsoft MSDN Library on opportunistic locking:

Opportunistic Locks, Microsoft Developer Network (MSDN), Windows Development > Windows Base Services > Files and I/O > SDK Documentation > File Storage > File Systems > About File Systems > Opportunistic Locks, Microsoft Corporation. http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp

Microsoft Knowledge Base Article Q224992 “Maintaining Transactional Integrity with OPLOCKS”, Microsoft Corporation, April 1999, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992.

Microsoft Knowledge Base Article Q296264 “Configuring Opportunistic Locking in Windows 2000”, Microsoft Corporation, April 2001, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264.

Microsoft Knowledge Base Article Q129202 “PC Ext: Explanation of Opportunistic Locking on Windows NT”, Microsoft Corporation, April 1995, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202.

Chapter 15. Securing Samba

Andrew Tridgell

Samba Team

John H. Terpstra

Samba Team

May 26, 2003

Introduction

This note was attached to the Samba 2.2.8 release notes as it contained an important security fix. The information contained here applies to Samba installations in general.

A new apprentice reported for duty to the chief engineer of a boiler house. He said, “Here I am, if you will show me the boiler I'll start working on it.” Then engineer replied, “You're leaning on it!

Security concerns are just like that. You need to know a little about the subject to appreciate how obvious most of it really is. The challenge for most of us is to discover that first morsel of knowledge with which we may unlock the secrets of the masters.

Features and Benefits

There are three levels at which security principals must be observed in order to render a site at least moderately secure. They are the perimeter firewall, the configuration of the host server that is running Samba and Samba itself.

Samba permits a most flexible approach to network security. As far as possible Samba implements the latest protocols to permit more secure MS Windows file and print operations.

Samba may be secured from connections that originate from outside the local network. This may be done using host-based protection (using samba's implementation of a technology known as “tcpwrappers,” or it may be done be using interface-based exclusion so smbd will bind only to specifically permitted interfaces. It is also possible to set specific share or resource-based exclusions, for example on the [IPC$] auto-share. The [IPC$] share is used for browsing purposes as well as to establish TCP/IP connections.

Another method by which Samba may be secured is by setting Access Control Entries (ACEs) in an Access Control List (ACL) on the shares themselves. This is discussed in .

Technical Discussion of Protective Measures and Issues

The key challenge of security is the fact that protective measures suffice at best only to close the door on known exploits and breach techniques. Never assume that because you have followed these few measures that the Samba server is now an impenetrable fortress! Given the history of information systems so far, it is only a matter of time before someone will find yet another vulnerability.

Using Host-Based Protection

In many installations of Samba, the greatest threat comes from outside your immediate network. By default, Samba will accept connections from any host, which means that if you run an insecure version of Samba on a host that is directly connected to the Internet you can be especially vulnerable.

One of the simplest fixes in this case is to use the hosts allow and hosts deny options in the Samba smb.conf configuration file to only allow access to your server from a specific range of hosts. An example might be:

hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
hosts deny = 0.0.0.0/0

The above will only allow SMB connections from localhost (your own computer) and from the two private networks 192.168.2 and 192.168.3. All other connections will be refused as soon as the client sends its first packet. The refusal will be marked as not listening on called name error.

User-Based Protection

If you want to restrict access to your server to valid users only, then the following method may be of use. In the smb.conf [global] section put:

valid users = @smbusers, jacko

This restricts all server access to either the user jacko or to members of the system group smbusers.

Using Interface Protection

By default, Samba will accept connections on any network interface that it finds on your system. That means if you have a ISDN line or a PPP connection to the Internet then Samba will accept connections on those links. This may not be what you want.

You can change this behavior using options like this:

interfaces = eth* lo
bind interfaces only = yes

This tells Samba to only listen for connections on interfaces with a name starting with eth such as eth0, eth1 plus on the loopback interface called lo. The name you will need to use depends on what OS you are using. In the above, I used the common name for Ethernet adapters on Linux.

If you use the above and someone tries to make an SMB connection to your host over a PPP interface called ppp0, then they will get a TCP connection refused reply. In that case, no Samba code is run at all as the operating system has been told not to pass connections from that interface to any Samba process.

Using a Firewall

Many people use a firewall to deny access to services they do not want exposed outside their network. This can be a good idea, although I recommend using it in conjunction with the above methods so you are protected even if your firewall is not active for some reason.

If you are setting up a firewall, you need to know what TCP and UDP ports to allow and block. Samba uses the following:

UDP/137 - used by nmbd
UDP/138 - used by nmbd
TCP/139 - used by smbd
TCP/445 - used by smbd

The last one is important as many older firewall setups may not be aware of it, given that this port was only added to the protocol in recent years.

Using IPC$ Share-Based Denials

If the above methods are not suitable, then you could also place a more specific deny on the IPC$ share that is used in the recently discovered security hole. This allows you to offer access to other shares while denying access to IPC$ from potentially untrustworthy hosts.

To do this you could use:

[IPC$]
hosts allow = 192.168.115.0/24 127.0.0.1
hosts deny = 0.0.0.0/0

This instructs Samba that IPC$ connections are not allowed from anywhere except from the two listed network addresses (localhost and the 192.168.115 subnet). Connections to other shares are still allowed. As the IPC$ share is the only share that is always accessible anonymously, this provides some level of protection against attackers that do not know a valid username/password for your host.

If you use this method, then clients will be given an `access denied' reply when they try to access the IPC$ share. Those clients will not be able to browse shares, and may also be unable to access some other resources. This is not recommended unless you cannot use one of the other methods listed above for some reason.

NTLMv2 Security

To configure NTLMv2 authentication, the following registry keys are worth knowing about:

		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
		"lmcompatibilitylevel"=dword:00000003
		

The value 0x00000003 means send NTLMv2 response only. Clients will use NTLMv2 authentication, use NTLMv2 session security if the server supports it. Domain Controllers accept LM, NTLM and NTLMv2 authentication.

		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
		"NtlmMinClientSec"=dword:00080000
		

The value 0x00080000 means permit only NTLMv2 session security. If either NtlmMinClientSec or NtlmMinServerSec is set to 0x00080000, the connection will fail if NTLMv2 session security is not negotiated.

Upgrading Samba

Please check regularly on http://www.samba.org/ for updates and important announcements. Occasionally security releases are made and it is highly recommended to upgrade Samba when a security vulnerability is discovered. Check with your OS vendor for OS specific upgrades.

Common Errors

If all of Samba and host platform configuration were really as intuitive as one might like them to be, this section would not be necessary. Security issues are often vexing for a support person to resolve, not because of the complexity of the problem, but for the reason that most administrators who post what turns out to be a security problem request are totally convinced that the problem is with Samba.

Smbclient Works on Localhost, but the Network Is Dead

This is a common problem. Red Hat Linux (and others) installs a default firewall. With the default firewall in place, only traffic on the loopback adapter (IP address 127.0.0.1) is allowed through the firewall.

The solution is either to remove the firewall (stop it) or modify the firewall script to allow SMB networking traffic through. See section above in this chapter.

Why Can Users Access Home Directories of Other Users?

We are unable to keep individual users from mapping to any other user's home directory once they have supplied a valid password! They only need to enter their own password. I have not found any method to configure Samba so that users may map only their own home directory.

User xyzzy can map his home directory. Once mapped user xyzzy can also map anyone else's home directory.

This is not a security flaw, it is by design. Samba allows users to have exactly the same access to the UNIX file system as when they were logged onto the UNIX box, except that it only allows such views onto the file system as are allowed by the defined shares.

If your UNIX home directories are set up so that one user can happily cd into another users directory and execute ls, the UNIX security solution is to change file permissions on the user's home directories such that the cd and ls are denied.

Samba tries very hard not to second guess the UNIX administrators security policies, and trusts the UNIX admin to set the policies and permissions he or she desires.

Samba allows the behavior you require. Simply put the only user = %S option in the [homes] share definition.

The only user works in conjunction with the users = list, so to get the behavior you require, add the line :

users = %S

this is equivalent to adding

valid users = %S

to the definition of the [homes] share, as recommended in the smb.conf man page.

Chapter 16. Interdomain Trust Relationships

John H. Terpstra

Samba Team

Rafal Szczesniak

Samba Team

Jelmer R. Vernooij

drawing
The Samba Team

Stephen Langasek

April 3, 2003

Samba-3 supports NT4-style domain trust relationships. This is a feature that many sites will want to use if they migrate to Samba-3 from an NT4-style domain and do not want to adopt Active Directory or an LDAP-based authentication backend. This section explains some background information regarding trust relationships and how to create them. It is now possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba-to-Samba trusts.

Features and Benefits

Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4-style trust relationships. This imparts to Samba similar scalability as with MS Windows NT4.

Given that Samba-3 has the capability to function with a scalable backend authentication database such as LDAP, and given its ability to run in Primary as well as Backup Domain Control modes, the administrator would be well advised to consider alternatives to the use of Interdomain trusts simply because by the very nature of how this works it is fragile. That was, after all, a key reason for the development and adoption of Microsoft Active Directory.

Trust Relationship Background

MS Windows NT3/4 type security domains employ a non-hierarchical security structure. The limitations of this architecture as it effects the scalability of MS Windows networking in large organizations is well known. Additionally, the flat namespace that results from this design significantly impacts the delegation of administrative responsibilities in large and diverse organizations.

Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means of circumventing the limitations of the older technologies. Not every organization is ready or willing to embrace ADS. For small companies the older NT4-style domain security paradigm is quite adequate, there remains an entrenched user base for whom there is no direct desire to go through a disruptive change to adopt ADS.

With MS Windows NT, Microsoft introduced the ability to allow differing security domains to effect a mechanism so users from one domain may be given access rights and privileges in another domain. The language that describes this capability is couched in terms of Trusts. Specifically, one domain will trust the users from another domain. The domain from which users are available to another security domain is said to be a trusted domain. The domain in which those users have assigned rights and privileges is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only, thus if users in both domains are to have privileges and rights in each others' domain, then it is necessary to establish two relationships, one in each direction.

In an NT4-style MS security domain, all trusts are non-transitive. This means that if there are three domains (let's call them RED, WHITE and BLUE) where RED and WHITE have a trust relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no implied trust between the RED and BLUE domains. Relationships are explicit and not transitive.

New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE domains above, with Windows 2000 and ADS the RED and BLUE domains can trust each other. This is an inherent feature of ADS domains. Samba-3 implements MS Windows NT4-style Interdomain trusts and interoperates with MS Windows 200x ADS security domains in similar manner to MS Windows NT4-style domains.

Native MS Windows NT4 Trusts Configuration

There are two steps to creating an interdomain trust relationship. To effect a two-way trust relationship, it is necessary for each domain administrator to create a trust account for the other domain to use in verifying security credentials.

Creating an NT4 Domain Trust

For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager. This is done from the Domain User Manager Policies entry on the menu bar. From the Policy menu, select Trust Relationships. Next to the lower box labeled Permitted to Trust this Domain are two buttons, Add and Remove. The Add button will open a panel in which to enter the name of the remote domain that will be able to assign access rights to users in your domain. You will also need to enter a password for this trust relationship, which the trusting domain will use when authenticating users from the trusted domain. The password needs to be typed twice (for standard confirmation).

Completing an NT4 Domain Trust

A trust relationship will work only when the other (trusting) domain makes the appropriate connections with the trusted domain. To consummate the trust relationship, the administrator will launch the Domain User Manager from the menu select Policies, then select Trust Relationships, click on the Add button next to the box that is labeled Trusted Domains. A panel will open in which must be entered the name of the remote domain as well as the password assigned to that trust.

Inter-Domain Trust Facilities

A two-way trust relationship is created when two one-way trusts are created, one in each direction. Where a one-way trust has been established between two MS Windows NT4 domains (let's call them DomA and DomB), the following facilities are created:

Figure 16.1. Trusts overview.

Trusts overview.
  • DomA (completes the trust connection) Trusts DomB.

  • DomA is the Trusting domain.

  • DomB is the Trusted domain (originates the trust account).

  • Users in DomB can access resources in DomA.

  • Users in DomA cannot access resources in DomB.

  • Global groups from DomB can be used in DomA.

  • Global groups from DomA cannot be used in DomB.

  • DomB does appear in the logon dialog box on client workstations in DomA.

  • DomA does not appear in the logon dialog box on client workstations in DomB.

  • Users/Groups in a trusting domain cannot be granted rights, permissions or access to a trusted domain.

  • The trusting domain can access and use accounts (Users/Global Groups) in the trusted domain.

  • Administrators of the trusted domain can be granted admininstrative rights in the trusting domain.

  • Users in a trusted domain can be given rights and privileges in the trusting domain.

  • Trusted domain Global Groups can be given rights and permissions in the trusting domain.

  • Global Groups from the trusted domain can be made members in Local Groups on MS Windows Domain Member machines.

Configuring Samba NT-Style Domain Trusts

This description is meant to be a fairly short introduction about how to set up a Samba server so that it can participate in interdomain trust relationships. Trust relationship support in Samba is at an early stage, so do not be surprised if something does not function as it should.

Each of the procedures described below assumes the peer domain in the trust relationship is controlled by a Windows NT4 server. However, the remote end could just as well be another Samba-3 domain. It can be clearly seen, after reading this document, that combining Samba-specific parts of what's written below leads to trust between domains in a purely Samba environment.

Samba as the Trusted Domain

In order to set the Samba PDC to be the trusted party of the relationship, you first need to create a special account for the domain that will be the trusting party. To do that, you can use the smbpasswd utility. Creating the trusted domain account is similar to creating a trusted machine account. Suppose, your domain is called SAMBA, and the remote domain is called RUMBA. The first step will be to issue this command from your favorite shell:

root#  smbpasswd -a -i rumba
New SMB password: XXXXXXXX
Retype SMB password: XXXXXXXX
Added user rumba$

where -a means to add a new account into the passdb database and -i means: “create this account with the InterDomain trust flag”.

The account name will be “rumba$” (the name of the remote domain).

After issuing this command, you will be asked to enter the password for the account. You can use any password you want, but be aware that Windows NT will not change this password until seven days following account creation. After the command returns successfully, you can look at the entry for the new account (in the standard way as appropriate for your configuration) and see that account's name is really RUMBA$ and it has the “I” flag set in the flags field. Now you are ready to confirm the trust by establishing it from Windows NT Server.

Open User Manager for Domains and from the Policies menu, select Trust Relationships.... Beside the Trusted domains list box click the Add... button. You will be prompted for the trusted domain name and the relationship password. Type in SAMBA, as this is the name of the remote domain and the password used at the time of account creation. Click on OK and, if everything went without incident, you will see the Trusted domain relationship successfully established message.

Samba as the Trusting Domain

This time activities are somewhat reversed. Again, we'll assume that your domain controlled by the Samba PDC is called SAMBA and the NT-controlled domain is called RUMBA.

The very first step is to add an account for the SAMBA domain on RUMBA's PDC.

Launch the Domain User Manager, then from the menu select Policies, Trust Relationships. Now, next to the Trusted Domains box press the Add button and type in the name of the trusted domain (SAMBA) and the password to use in securing the relationship.

The password can be arbitrarily chosen. It is easy to change the password from the Samba server whenever you want. After confirming the password your account is ready for use. Now its Samba's turn.

Using your favorite shell while being logged in as root, issue this command:

root# net rpc trustdom establish rumba

You will be prompted for the password you just typed on your Windows NT4 Server box. An error message `NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT' that may be reported periodically is of no concern and may safely be ignored. It means the password you gave is correct and the NT4 Server says the account is ready for interdomain connection and not for ordinary connection. After that, be patient; it can take a while (especially in large networks), but eventually you should see the Success message. Congratulations! Your trust relationship has just been established.

Note

You have to run this command as root because you must have write access to the secrets.tdb file.

NT4-Style Domain Trusts with Windows 2000

Although Domain User Manager is not present in Windows 2000, it is also possible to establish an NT4-style trust relationship with a Windows 2000 domain controller running in mixed mode as the trusting server. It should also be possible for Samba to trust a Windows 2000 server, however, more testing is still needed in this area.

After as described above, open Active Directory Domains and Trusts on the AD controller of the domain whose resources you wish Samba users to have access to. Remember that since NT4-style trusts are not transitive, if you want your users to have access to multiple mixed-mode domains in your AD forest, you will need to repeat this process for each of those domains. With Active Directory Domains and Trusts open, right-click on the name of the Active Directory domain that will trust our Samba domain and choose Properties, then click on the Trusts tab. In the upper part of the panel, you will see a list box labeled Domains trusted by this domain:, and an Add... button next to it. Press this button and just as with NT4, you will be prompted for the trusted domain name and the relationship password. Press OK and after a moment, Active Directory will respond with The trusted domain has been added and the trust has been verified. Your Samba users can now be granted acess to resources in the AD domain.

Common Errors

Interdomain trust relationships should not be attempted on networks that are unstable or that suffer regular outages. Network stability and integrity are key concerns with distributed trusted domains.

Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

Shirish Kalele

Samba Team & Veritas Software

John H. Terpstra

Samba Team

12 Jul 2000

Features and Benefits

The Distributed File System (DFS) provides a means of separating the logical view of files and directories that users see from the actual physical locations of these resources on the network. It allows for higher availability, smoother storage expansion, load balancing, and so on.

For information about DFS, refer to the Microsoft documentation. This document explains how to host a DFS tree on a UNIX machine (for DFS-aware clients to browse) using Samba.

To enable SMB-based DFS for Samba, configure it with the --with-msdfs option. Once built, a Samba server can be made a DFS server by setting the global Boolean host msdfs parameter in the smb.conf file. You designate a share as a DFS root using the Share Level Boolean msdfs root parameter. A DFS root directory on Samba hosts DFS links in the form of symbolic links that point to other servers. For example, a symbolic link junction->msdfs:storage1\share1 in the share directory acts as the DFS junction. When DFS-aware clients attempt to access the junction link, they are redirected to the storage location (in this case, \\storage1\share1).

DFS trees on Samba work with all DFS-aware clients ranging from Windows 95 to 200x. shows how to setup a DFS tree on a Samba server. In the /export/dfsroot directory, you set up your DFS links to other servers on the network.

root# cd /export/dfsroot
root# chown root /export/dfsroot
root# chmod 755 /export/dfsroot
root# ln -s msdfs:storageA\\shareA linka
root# ln -s msdfs:serverB\\share,serverC\\share linkb

Example 17.1. smb.conf with DFS configured

[global]
netbios name = GANDALF
host msdfs = yes
[dfs]
path = /export/dfsroot
msdfs root = yes

You should set up the permissions and ownership of the directory acting as the DFS root so that only designated users can create, delete or modify the msdfs links. Also note that symlink names should be all lowercase. This limitation exists to have Samba avoid trying all the case combinations to get at the link name. Finally, set up the symbolic links to point to the network shares you want and start Samba.

Users on DFS-aware clients can now browse the DFS tree on the Samba server at \\samba\dfs. Accessing links linka or linkb (which appear as directories to the client) takes users directly to the appropriate shares on the network.

Common Errors

  • Windows clients need to be rebooted if a previously mounted non-DFS share is made a DFS root or vice versa. A better way is to introduce a new share and make it the DFS root.

  • Currently, there's a restriction that msdfs symlink names should all be lowercase.

  • For security purposes, the directory acting as the root of the DFS tree should have ownership and permissions set so only designated users can modify the symbolic links in the directory.

MSDFS UNIX Path Is Case-Critical

A network administrator sent advice to the Samba mailing list after a long sessions trying to determine why DFS was not working. His advice is worth noting.

I spent some time trying to figure out why my particular dfs root wasn't working. I noted in the documenation that the symlink should be in all lowercase. It should be amended that the entire path to the symlink should all be in lowercase as well.

For example, I had a share defined as such:

		[pub]
			path = /export/home/Shares/public_share
			msdfs root = yes
		

and I could not make my Windows 9x/Me (with the dfs client installed) follow this symlink:

			damage1 -> msdfs:damage\test-share
		

Running a debug level of 10 reveals:

		[2003/08/20 11:40:33, 5] msdfs/msdfs.c:is_msdfs_link(176)
		  is_msdfs_link: /export/home/shares/public_share/* does not exist.
		

Curious. So I changed the directory name from .../Shares/... to .../shares/... (along with my service definition) and it worked!

Chapter 18. Classical Printing Support

Kurt Pfeifle

Danka Deutschland GmbH

Gerald (Jerry) Carter

Samba Team

John H. Terpstra

Samba Team

May 31, 2003

Table of Contents

Features and Benefits
Technical Introduction
Client to Samba Print Job Processing
Printing Related Configuration Parameters
Simple Print Configuration
Verifing Configuration with testparm
Rapid Configuration Validation
Extended Printing Configuration
Detailed Explanation Settings
Printing Developments Since Samba-2.2
Point'n'Print Client Drivers on Samba Servers
The Obsoleted [printer$] Section
Creating the [print$] Share
[print$] Section Parameters
The [print$] Share Directory
Installing Drivers into [print$]
Add Printer Wizard Driver Installation
Installing Print Drivers Using rpcclient
Client Driver Installation Procedure
First Client Driver Installation
Setting Device Modes on New Printers
Additional Client Driver Installation
Always Make First Client Connection as root or printer admin
Other Gotchas
Setting Default Print Options for Client Drivers
Supporting Large Numbers of Printers
Adding New Printers with the Windows NT APW
Error Message: Cannot connect under a different Name
Take Care When Assembling Driver Files
Samba and Printer Ports
Avoiding Common Client Driver Misconfiguration
The Imprints Toolset
What is Imprints?
Creating Printer Driver Packages
The Imprints Server
The Installation Client
Adding Network Printers without User Interaction
The addprinter Command
Migration of Classical Printing to Samba
Publishing Printer Information in Active Directory or LDAP
Common Errors
I Give My Root Password but I Do Not Get Access
My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

Features and Benefits

Printing is often a mission-critical service for the users. Samba can provide this service reliably and seamlessly for a client network consisting of Windows workstations.

A Samba print service may be run on a Stand-alone or Domain Member server, side by side with file serving functions, or on a dedicated print server. It can be made as tight or as loosely secured as needs dictate. Configurations may be simple or complex. Available authentication schemes are essentially the same as described for file services in previous chapters. Overall, Samba's printing support is now able to replace an NT or Windows 2000 print server full-square, with additional benefits in many cases. Clients may download and install drivers and printers through their familiar “Point'n'Print” mechanism. Printer installations executed by “Logon Scripts” are no problem. Administrators can upload and manage drivers to be used by clients through the familiar “Add Printer Wizard”. As an additional benefit, driver and printer management may be run from the command line or through scripts, making it more efficient in case of large numbers of printers. If a central accounting of print jobs (tracking every single page and supplying the raw data for all sorts of statistical reports) is required, this function is best supported by the newer Common UNIX Printing System (CUPS) as the print subsystem underneath the Samba hood.

This chapter deals with the foundations of Samba printing as they are implemented by the more traditional UNIX (BSD- and System V-style) printing systems. Many things covered in this chapter apply also to CUPS. If you use CUPS, you may be tempted to jump to the next chapter but you will certainly miss a few things if you do. It is recommended that you read this chapter as well as .

Note

Most of the following examples have been verified on Windows XP Professional clients. Where this document describes the responses to commands given, bear in mind that Windows 200x/XP clients are quite similar, but may differ in minor details. Windows NT is somewhat different again.

Technical Introduction

Samba's printing support always relies on the installed print subsystem of the UNIX OS it runs on. Samba is a “middleman.” It takes print files from Windows (or other SMB) clients and passes them to the real printing system for further processing, therefore, it needs to communicate with both sides: the Windows print clients and the UNIX printing system. Hence, we must differentiate between the various client OS types, each of which behave differently, as well as the various UNIX print subsystems, which themselves have different features and are accessed differently.

This deals with the traditional way of UNIX printing. The next chapter covers in great detail the more modern Common UNIX Printing System (CUPS).

Important

CUPS users, be warned: do not just jump on to the next chapter. You might miss important information only found here!

It is apparent from postings on the Samba mailing list that print configuration is one of the most problematic aspects of Samba administration today. Many new Samba administrators have the impression that Samba performs some sort of print processing. Rest assured, Samba does not peform any type of print processing. It does not do any form of print filtering.

Samba obtains from its clients a data stream (print job) that it spools to a local spool area. When the entire print job has been received, Samba invokes a local UNIX/Linux print command and passes the spooled file to it. It is up to the local system printing subsystems to correctly process the print job and to submit it to the printer.

Client to Samba Print Job Processing

Successful printing from a Windows client via a Samba print server to a UNIX printer involves six (potentially seven) stages:

  1. Windows opens a connection to the printer share.

  2. Samba must authenticate the user.

  3. Windows sends a copy of the print file over the network into Samba's spooling area.

  4. Windows closes the connection.

  5. Samba invokes the print command to hand the file over to the UNIX print subsystem's spooling area.

  6. The UNIX print subsystem processes the print job.

  7. The print file may need to be explicitly deleted from the Samba spooling area. This item depends on your print spooler configuration settings.

Printing Related Configuration Parameters

There are a number of configuration parameters to control Samba's printing behavior. Please refer to the man page for smb.conf for an overview of these. As with other parameters, there are Global Level (tagged with a G in the listings) and Service Level (S) parameters.

Global Parameters

These may not go into individual share definitions. If they go in by error, the testparm utility can discover this (if you run it) and tell you so.

Service Level Parameters

These may be specified in the [global] section of smb.conf. In this case they define the default behavior of all individual or service level shares (provided they do not have a different setting defined for the same parameter, thus overriding the global default).

Simple Print Configuration

shows a simple printing configuration. If you compare this with your own, you may find additional parameters that have been pre-configured by your OS vendor. Below is a discussion and explanation of the parameters. This example does not use many parameters. However, in many environments these are enough to provide a valid smb.conf file that enables all clients to print.

Example 18.1. Simple configuration with BSD printing

[global]
printing = bsd
load printers = yes
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no

This is only an example configuration. Samba assigns default values to all configuration parameters. The defaults are conservative and sensible. When a parameter is specified in the smb.conf file, this overwrites the default value. The testparm utility when run as root is capable of reporting all setting, both default as well as smb.conf file settings. Testparm gives warnings for all misconfigured settings. The complete output is easily 340 lines and more, so you may want to pipe it through a pager program.

The syntax for the configuration file is easy to grasp. You should know that is not very picky about its syntax. As has been explained elsewhere in this document, Samba tolerates some spelling errors (such as browsable instead of browseable), and spelling is case-insensitive. It is permissible to use Yes/No or True/False for Boolean settings. Lists of names may be separated by commas, spaces or tabs.

Verifing Configuration with testparm

To see all (or at least most) printing-related settings in Samba, including the implicitly used ones, try the command outlined below. This command greps for all occurrences of lp, print, spool, driver, ports and [ in testparms output. This provides a convenient overview of the running smbd print configuration. This command does not show individually created printer shares or the spooling paths they may use. Here is the output of my Samba setup, with settings shown in :

root# testparm -s -v | egrep "(lp|print|spool|driver|ports|\[)"
 Load smb config files from /etc/samba/smb.conf
 Processing section "[homes]"
 Processing section "[printers]"
 
 [global]
        smb ports = 445 139
        lpq cache time = 10
        total print jobs = 0
        load printers = Yes
        printcap name = /etc/printcap
        disable spoolss = No
        enumports command =
        addprinter command = 
        deleteprinter command = 
        show add printer wizard = Yes
        os2 driver map =
        printer admin =
        min print space = 0
        max print jobs = 1000
        printable = No
        printing = bsd
        print command = lpr -r -P'%p' %s
        lpq command = lpq -P'%p'
        lprm command = lprm -P'%p' %j
        lppause command =
        lpresume command =
        printer name =
        use client driver = No

 [homes]

 [printers]
        path = /var/spool/samba
        printable = Yes

You can easily verify which settings were implicitly added by Samba's default behavior. Remember: it may be important in your future dealings with Samba.

Note

testparm in Samba-3 behaves differently from that in 2.2.x: used without the “-v” switch it only shows you the settings actually written into! To see the complete configuration used, add the “-v” parameter to testparm.

Rapid Configuration Validation

Should you need to troubleshoot at any stage, please always come back to this point first and verify if testparm shows the parameters you expect. To give you a warning from personal experience, try to just comment out the load printers parameter. If your 2.2.x system behaves like mine, you'll see this:

root# grep "load printers" /etc/samba/smb.conf
        #  load printers = Yes
        # This setting is commented out!!
 
root# testparm -v /etc/samba/smb.conf | egrep "(load printers)"
        load printers = Yes

I assumed that commenting out of this setting should prevent Samba from publishing my printers, but it still did. It took some time to figure out the reason. But I am no longer fooled ... at least not by this.

root# grep -A1 "load printers" /etc/samba/smb.conf
        load printers = No
        # The above setting is what I want!
        #  load printers = Yes
        # This setting is commented out!

root# testparm -s -v smb.conf.simpleprinting | egrep "(load printers)"
        load printers = No

Only when the parameter is explicitly set to load printers = No would Samba conform with my intentions. So, my strong advice is:

  • Never rely on commented out parameters.

  • Always set parameters explicitly as you intend them to behave.

  • Use testparm to uncover hidden settings that might not reflect your intentions.

The following is the most minimal configuration file:

root# cat /etc/samba/smb.conf-minimal
        [printers]

This example should show that you can use testparm to test any Samba configuration file. Actually, we encourage you not to change your working system (unless you know exactly what you are doing). Don't rely on the assumption that changes will only take effect after you re-start smbd! This is not the case. Samba re-reads it every 60 seconds and on each new client connection. You might have to face changes for your production clients that you didn't intend to apply. You will now note a few more interesting things; testparm is useful to identify what the Samba print configuration would be if you used this minimalistic configuration. Here is what you can expect to find:

root# testparm -v smb.conf-minimal | egrep "(print|lpq|spool|driver|ports|[)"
 Processing section "[printers]"
 WARNING: [printers] service MUST be printable!
 No path in service printers - using /tmp

        lpq cache time = 10
        total print jobs = 0
        load printers = Yes
        printcap name = /etc/printcap
        disable spoolss = No
        enumports command =
        addprinter command =
        deleteprinter command =
        show add printer wizard = Yes
        os2 driver map =
        printer admin =
        min print space = 0
        max print jobs = 1000
        printable = No
        printing = bsd
        print command = lpr -r -P%p %s
        lpq command = lpq -P%p
        printer name =
        use client driver = No

 [printers]
        printable = Yes

testparm issued two warnings:

  • We did not specify the [printers] section as printable.

  • We did not tell Samba which spool directory to use.

However, this was not fatal and Samba will default to values that will work. Please, do not rely on this and do not use this example. This was included to encourage you to be careful to design and specify your setup to do precisely what you require. The outcome on your system may vary for some parameters given, since Samba may have been built with different compile-time options. Warning: do not put a comment sign at the end of a valid line. It will cause the parameter to be ignored (just as if you had put the comment sign at the front). At first I regarded this as a bug in my Samba versions. But the man page clearly says: “Internal whitespace in a parameter value is retained verbatim.” This means that a line consisting of, for example:

# This defines LPRng as the printing system
printing = lprng

will regard the whole of the string after the “=” sign as the value you want to define. This is an invalid value that will be ignored and a default value will be used in its place.

Extended Printing Configuration

In we show a more verbose example configuration for print-related settings in a BSD-style printing environment. What follows is a discussion and explanation of the various parameters. We chose to use BSD-style printing here because it is still the most commonly used system on legacy UNIX/Linux installations. New installations predominantly use CUPS, which is discussed in a separate chapter. explicitly names many parameters that do not need to be specified because they are set by default. You could use a much leaner smb.conf file. Alternately, you can use testparm or SWAT to optimize the smb.conf file to remove all parameters that are set at default.

Example 18.2. Extended BSD Printing Configuration

[global]
printing = bsd
load printers = yes
show add printer wizard = yes
printcap name = /etc/printcap
printer admin = @ntadmin, root
total print jobs = 100
lpq cache time = 20
use client driver = no
[printers]
comment = All Printers
printable = yes
path = /var/spool/samba
browseable = no
guest ok = yes
public = yes
read only = yes
writable = no
[my_printer_name]
comment = Printer with Restricted Access
path = /var/spool/samba_my_printer
printer admin = kurt
browseable = yes
printable = yes
writeable = no
hosts allow = 0.0.0.0
hosts deny = turbo_xp, 10.160.50.23, 10.160.51.60
guest ok = no

This is an example configuration. You may not find all the settings that are in the confioguration file that was provided by the OS vendor. Samba configuration parameters, if not explicitly set default to a sensible value. To see all settings, as root use the testparm utility. testparm gives warnings for misconfigured settings.

Detailed Explanation Settings

The following is a discussion of the settings from above shown example.

The [global] Section

The [global] section is one of four special sections (along with [[homes], [printers] and [print$]...). The [global] contains all parameters which apply to the server as a whole. It is the place for parameters that have only a global meaning. It may also contain service level parameters that then define default settings for all other sections and shares. This way you can simplify the configuration and avoid setting the same value repeatedly. (Within each individual section or share you may, however, override these globally set share settings and specify other values).

printing = bsd

Causes Samba to use default print commands applicable for the BSD (also known as RFC 1179 style or LPR/LPD) printing system. In general, the printing parameter informs Samba about the print subsystem it should expect. Samba supports CUPS, LPD, LPRNG, SYSV, HPUX, AIX, QNX, and PLP. Each of these systems defaults to a different print command (and other queue control commands).

Caution

The printing parameter is normally a service level parameter. Since it is included here in the [global] section, it will take effect for all printer shares that are not defined differently. Samba-3 no longer supports the SOFTQ printing system.

load printers = yes

Tells Samba to create automatically all available printer shares. Available printer shares are discovered by scanning the printcap file. All created printer shares are also loaded for browsing. If you use this parameter, you do not need to specify separate shares for each printer. Each automatically created printer share will clone the configuration options found in the [printers] section. (The load printers = no setting will allow you to specify each UNIX printer you want to share separately, leaving out some you do not want to be publicly visible and available).

show add printer wizard = yes

Setting is normally enabled by default (even if the parameter is not specified in smb.conf). It causes the Add Printer Wizard icon to appear in the Printers folder of the Samba host's share listing (as shown in Network Neighborhood or by the net view command). To disable it, you need to explicitly set it to no (commenting it out will not suffice). The Add Printer Wizard lets you upload printer drivers to the [print$] share and associate it with a printer (if the respective queue exists before the action), or exchange a printer's driver against any other previously uploaded driver.

total print jobs = 100

Sets the upper limit to 100 print jobs being active on the Samba server at any one time. Should a client submit a job that exceeds this number, a “no more space available on server” type of error message will be returned by Samba to the client. A setting of zero (the default) means there is no limit at all.

printcap name = /etc/printcap

Tells Samba where to look for a list of available printer names. Where CUPS is used, make sure that a printcap file is written. This is controlled by the Printcap directive in the cupsd.conf file.

printer admin = @ntadmin

Members of the ntadmin group should be able to add drivers and set printer properties (ntadmin is only an example name, it needs to be a valid UNIX group name); root is implicitly always a printer admin. The @ sign precedes group names in the /etc/group. A printer admin can do anything to printers via the remote administration interfaces offered by MS-RPC (see below). In larger installations, the printer admin parameter is normally a per-share parameter. This permits different groups to administer each printer share.

lpq cache time = 20

Controls the cache time for the results of the lpq command. It prevents the lpq command being called too often and reduces the load on a heavily used print server.

use client driver = no

If set to yes, only takes effect for Windows NT/200x/XP clients (and not for Win 95/98/ME). Its default value is No (or False). It must not be enabled on print shares (with a yes or true setting) that have valid drivers installed on the Samba server. For more detailed explanations see the smb.conf man page.

The [printers] Section

This is the second special section. If a section with this name appears in the smb.conf, users are able to connect to any printer specified in the Samba host's printcap file, because Samba on startup then creates a printer share for every printername it finds in the printcap file. You could regard this section as a general convenience shortcut to share all printers with minimal configuration. It is also a container for settings that should apply as default to all printers. (For more details see the smb.conf man page.) Settings inside this container must be Share Level parameters.

comment = All printers

The comment is shown next to the share if a client queries the server, either via Network Neighborhood or with the net view command to list available shares.

printable = yes

The [printers] service must be declared as printable. If you specify otherwise, smbd will refuse to load at startup. This parameter allows connected clients to open, write to and submit spool files into the directory specified with the path parameter for this service. It is used by Samba to differentiate printer shares from file shares.

path = /var/spool/samba

Must point to a directory used by Samba to spool incoming print files. It must not be the same as the spool directory specified in the configuration of your UNIX print subsystem! The path typically points to a directory that is world writeable, with the “sticky” bit set to it.

browseable = no

Is always set to no if printable = yes. It makes the [printer] share itself invisible in the list of available shares in a net view command or in the Explorer browse list. (You will of course see the individual printers).

guest ok = yes

If this parameter is set to yes, no password is required to connect to the printer's service. Access will be granted with the privileges of the guest account. On many systems the guest account will map to a user named “nobody”. This user will usually be found in the UNIX passwd file with an empty password, but with no valid UNIX login. (On some systems the guest account might not have the privilege to be able to print. Test this by logging in as your guest user using su - guest and run a system print command like:

lpr -P printername /etc/motd

public = yes

Is a synonym for guest ok = yes. Since we have guest ok = yes, it really does not need to be here. (This leads to the interesting question: “What if I by accident have two contradictory settings for the same share?” The answer is the last one encountered by Samba wins. Testparm does not complain about different settings of the same parameter for the same share. You can test this by setting up multiple lines for the guest account parameter with different usernames, and then run testparm to see which one is actually used by Samba.)

read only = yes

Normally (for other types of shares) prevents users from creating or modifying files in the service's directory. However, in a “printable” service, it is always allowed to write to the directory (if user privileges allow the connection), but only via print spooling operations. Normal write operations are not permitted.

writeable = no

Is a synonym for read only = yes.

Any [my_printer_name] Section

If a section appears in the smb.conf file, which when given the parameter printable = yes causes Samba to configure it as a printer share. Windows 9x/Me clients may have problems with connecting or loading printer drivers if the share name has more than eight characters. Do not name a printer share with a name that may conflict with an existing user or file share name. On Client connection requests, Samba always tries to find file shares with that name first. If it finds one, it will connect to this and will not connect to a printer with the same name!

comment = Printer with Restricted Access

The comment says it all.

path = /var/spool/samba_my_printer

Sets the spooling area for this printer to a directory other than the default. It is not necessary to set it differently, but the option is available.

printer admin = kurt

The printer admin definition is different for this explicitly defined printer share from the general [printers] share. It is not a requirement; we did it to show that it is possible.

browseable = yes

This makes the printer browseable so the clients may conveniently find it when browsing the Network Neighborhood.

printable = yes

See .

writeable = no

See .

hosts allow = 10.160.50.,10.160.51.

Here we exercise a certain degree of access control by using the hosts allow and hosts deny parameters. This is not by any means a safe bet. It is not a way to secure your printers. This line accepts all clients from a certain subnet in a first evaluation of access control.

hosts deny = turbo_xp,10.160.50.23,10.160.51.60

All listed hosts are not allowed here (even if they belong to the allowed subnets). As you can see, you could name IP addresses as well as NetBIOS hostnames here.

guest ok = no

This printer is not open for the guest account.

Print Commands

In each section defining a printer (or in the [printers] section), a print command parameter may be defined. It sets a command to process the files that have been placed into the Samba print spool directory for that printer. (That spool directory was, if you remember, set up with the path parameter). Typically, this command will submit the spool file to the Samba host's print subsystem, using the suitable system print command. But there is no requirement that this needs to be the case. For debugging or some other reason, you may want to do something completely different than print the file. An example is a command that just copies the print file to a temporary location for further investigation when you need to debug printing. If you craft your own print commands (or even develop print command shell scripts), make sure you pay attention to the need to remove the files from the Samba spool directory. Otherwise, your hard disk may soon suffer from shortage of free space.

Default UNIX System Printing Commands

You learned earlier on that Samba, in most cases, uses its built-in settings for many parameters if it cannot find an explicitly stated one in its configuration file. The same is true for the print command. The default print command varies depending on the printing parameter setting. In the commands listed below, you will notice some parameters of the form %X where X is p, s, J, and so on. These letters stand for printer name, spoolfile and job ID, respectively. They are explained in more detail further below. presents an overview of key printing options but excludes the special case of CUPS that is discussed in .

Table 18.1. Default Printing Settings

SettingDefault Printing Commands
printing = bsd|aix|lprng|plpprint command is lpr -r -P%p %s
printing = sysv|hpuxprint command is lp -c -P%p %s; rm %s
printing = qnxprint command is lp -r -P%p -s %s
printing = bsd|aix|lprng|plplpq command is lpq -P%p
printing = sysv|hpuxlpq command is lpstat -o%p
printing = qnxlpq command is lpq -P%p
printing = bsd|aix|lprng|plplprm command is lprm -P%p %j
printing = sysv|hpuxlprm command is cancel %p-%j
printing = qnxlprm command is cancel %p-%j
printing = bsd|aix|lprng|plplppause command is lp -i %p-%j -H hold
printing = sysv|hpuxlppause command (...is empty)
printing = qnxlppause command (...is empty)
printing = bsd|aix|lprng|plplpresume command is lp -i %p-%j -H resume
printing = sysv|hpuxlpresume command (...is empty)
printing = qnxlpresume command (...is empty)

We excluded the special case of CUPS here, because it is discussed in the next chapter. For printing = CUPS, if Samba is compiled against libcups, it uses the CUPS API to submit jobs. (It is a good idea also to set printcap = cups in case your cupsd.conf is set to write its autogenerated printcap file to an unusual place). Otherwise, Samba maps to the System V printing commands with the -oraw option for printing, i.e., it uses lp -c -d%p -oraw; rm %s. With printing = cups, and if Samba is compiled against libcups, any manually set print command will be ignored!

Custom Print Commands

After a print job has finished spooling to a service, the print command will be used by Samba via a system() call to process the spool file. Usually the command specified will submit the spool file to the host's printing subsystem. But there is no requirement at all that this must be the case. The print subsystem may not remove the spool file on its own. So whatever command you specify, you should ensure that the spool file is deleted after it has been processed.

There is no difficulty with using your own customized print commands with the traditional printing systems. However, if you do not wish to roll your own, you should be well informed about the default built-in commands that Samba uses for each printing subsystem (see Table 17.1). In all the commands listed in the last paragraphs, you see parameters of the form %X. These are macros, or shortcuts, used as placeholders for the names of real objects. At the time of running a command with such a placeholder, Samba will insert the appropriate value automatically. Print commands can handle all Samba macro substitutions. In regard to printing, the following ones do have special relevance:

  • %s, %f the path to the spool file name.

  • %p the appropriate printer name.

  • %J the job name as transmitted by the client.

  • %c the number of printed pages of the spooled job (if known).

  • %z the size of the spooled print job (in bytes).

The print command must contain at least one occurrence of %s or the %f. The %p is optional. If no printer name is supplied, the %p will be silently removed from the print command. In this case, the job is sent to the default printer.

If specified in the [global] section, the print command given will be used for any printable service that does not have its own print command specified. If there is neither a specified print command for a printable service nor a global print command, spool files will be created but not processed! Most importantly, print files will not be removed, so they will consume disk space.

Printing may fail on some UNIX systems when using the “nobody” account. If this happens, create an alternative guest account and give it the privilege to print. Set up this guest account in the [global] section with the guest account parameter.

You can form quite complex print commands. You need to realize that print commands are just passed to a UNIX shell. The shell is able to expand the included environment variables as usual. (The syntax to include a UNIX environment variable $variable in the Samba print command is %$variable.) To give you a working print command example, the following will log a print job to /tmp/print.log, print the file, then remove it. The semicolon (“;” is the usual separator for commands in shell scripts:

print command = echo Printing %s >> /tmp/print.log; lpr -P %p %s; rm %s

You may have to vary your own command considerably from this example depending on how you normally print files on your system. The default for the print command parameter varies depending on the setting of the printing parameter. Another example is:

print command = /usr/local/samba/bin/myprintscript %p %s

Printing Developments Since Samba-2.2

Prior to Samba-2.2.x, print server support for Windows clients was limited to LanMan printing calls. This is the same protocol level as Windows 9x/Me PCs offer when they share printers. Beginning with the 2.2.0 release, Samba started to support the native Windows NT printing mechanisms. These are implemented via MS-RPC (RPC = Remote Procedure Calls ). MS-RPCs use the SPOOLSS named pipe for all printing.

The additional functionality provided by the new SPOOLSS support includes:

  • Support for downloading printer driver files to Windows 95/98/NT/2000 clients upon demand (Point'n'Print).

  • Uploading of printer drivers via the Windows NT Add Printer Wizard (APW) or the Imprints tool set.

  • Support for the native MS-RPC printing calls such as StartDocPrinter, EnumJobs(), and so on. (See the MSDN documentation for more information on the Win32 printing API).

  • Support for NT Access Control Lists (ACL) on printer objects.

  • Improved support for printer queue manipulation through the use of internal databases for spooled job information (implemented by various *.tdb files).

A benefit of updating is that Samba-3 is able to publish its printers to Active Directory (or LDAP).

A fundamental difference exists between MS Windows NT print servers and Samba operation. Windows NT permits the installation of local printers that are not shared. This is an artifact of the fact that any Windows NT machine (server or client) may be used by a user as a workstation. Samba will publish all printers that are made available, either by default or by specific declaration via printer-specific shares.

Windows NT/200x/XP Professional clients do not have to use the standard SMB printer share; they can print directly to any printer on another Windows NT host using MS-RPC. This, of course, assumes that the client has the necessary privileges on the remote host that serves the printer resource. The default permissions assigned by Windows NT to a printer gives the Print permissions to the well-known Everyone group. (The older clients of type Windows 9x/Me can only print to shared printers).

Point'n'Print Client Drivers on Samba Servers

There is much confusion about what all this means. The question is often asked, “Is it or is it not necessary for printer drivers to be installed on a Samba host in order to support printing from Windows clients?” The answer to this is no, it is not necessary.

Windows NT/2000 clients can, of course, also run their APW to install drivers locally (which then connect to a Samba-served print queue). This is the same method used by Windows 9x/Me clients. (However, a bug existed in Samba 2.2.0 that made Windows NT/2000 clients require that the Samba server possess a valid driver for the printer. This was fixed in Samba 2.2.1).

But it is a new capability to install the printer drivers into the [print$] share of the Samba server, and a big convenience, too. Then all clients (including 95/98/ME) get the driver installed when they first connect to this printer share. The uploading or depositing of the driver into this [print$] share and the following binding of this driver to an existing Samba printer share can be achieved by different means:

  • Running the APW on an NT/200x/XP Professional client (this does not work from 95/98/ME clients).

  • Using the Imprints toolset.

  • Using the smbclient and rpcclient commandline tools.

  • Using cupsaddsmb (only works for the CUPS printing system, not for LPR/LPD, LPRng, and so on).

Samba does not use these uploaded drivers in any way to process spooled files. These drivers are utilized entirely by the clients who download and install them via the “Point'n'Print” mechanism supported by Samba. The clients use these drivers to generate print files in the format the printer (or the UNIX print system) requires. Print files received by Samba are handed over to the UNIX printing system, which is responsible for all further processing, as needed.

The Obsoleted [printer$] Section

Versions of Samba prior to 2.2 made it possible to use a share named [printer$]. This name was taken from the same named service created by Windows 9x/Me clients when a printer was shared by them. Windows 9x/Me printer servers always have a [printer$] service that provides read-only access (with no password required) to support printer driver downloads. However, Samba's initial implementation allowed for a parameter named printer driver location to be used on a per share basis. This specified the location of the driver files associated with that printer. Another parameter named printer driver provided a means of defining the printer driver name to be sent to the client.

These parameters, including the printer driver file parameter, are now removed and cannot be used in installations of Samba-3. The share name [print$] is now used for the location of downloadable printer drivers. It is taken from the [print$] service created by Windows NT PCs when a printer is shared by them. Windows NT print servers always have a [print$] service that provides read-write access (in the context of its ACLs) to support printer driver downloads and uploads. This does not mean Windows 9x/Me clients are now thrown aside. They can use Samba's [print$] share support just fine.

Creating the [print$] Share

In order to support the uploading and downloading of printer driver files, you must first configure a file share named [print$]. The public name of this share is hard coded in the MS Windows clients. It cannot be renamed since Windows clients are programmed to search for a service of exactly this name if they want to retrieve printer driver files.

You should modify the server's file to add the global parameters and create the [print$] file share (of course, some of the parameter values, such as path are arbitrary and should be replaced with appropriate values for your site). See .

Example 18.3. [print\$] example

[global]
# members of the ntadmin group should be able to add drivers and set
# printer properties. root is implicitly always a 'printer admin'.
printer admin = @ntadmin
...
[printers]
...
[print$]
comment = Printer Driver Download Area
path = /etc/samba/drivers
browseable = yes
guest ok = yes
read only = yes
write list = @ntadmin, root

Of course, you also need to ensure that the directory named by the path parameter exists on the UNIX file system.

[print$] Section Parameters

The [print$] is a special section in smb.conf. It contains settings relevant to potential printer driver download and is used by windows clients for local print driver installation. The following parameters are frequently needed in this share section:

comment = Printer Driver Download Area

The comment appears next to the share name if it is listed in a share list (usually Windows clients will not see it, but it will also appear up in a smbclient -L sambaserver output).

path = /etc/samba/printers

Is the path to the location of the Windows driver file deposit from the UNIX point of view.

browseable = no

Makes the [print$] share invisible to clients from the Network Neighborhood. However, you can still mount it from any client using the net use g:\\sambaserver\print$ command in a DOS-box or the Connect network drive menu> from Windows Explorer.

guest ok = yes

Gives read-only access to this share for all guest users. Access may be granted to download and install printer drivers on clients. The requirement for guest ok = yes depends on how your site is configured. If users will be guaranteed to have an account on the Samba host, then this is a non-issue.

Note

If all your Windows NT users are guaranteed to be authenticated by the Samba server (for example, if Samba authenticates via an NT domain server and the user has already been validated by the Domain Controller in order to logon to the Windows NT session), then guest access is not necessary. Of course, in a workgroup environment where you just want to print without worrying about silly accounts and security, then configure the share for guest access. You should consider adding map to guest = Bad User in the [global] section as well. Make sure you understand what this parameter does before using it.

read only = yes

Because we do not want everybody to upload driver files (or even change driver settings), we tagged this share as not writeable.

write list = @ntadmin, root

The [print$] was made read-only by the previous setting so we should create a write list entry also. UNIX groups (denoted with a leading “@” character). Users listed here are allowed write-access (as an exception to the general public's read-only access), which they need to update files on the share. Normally, you will want to only name administrative-level user account in this setting. Check the file system permissions to make sure these accounts can copy files to the share. If this is a non-root account, then the account should also be mentioned in the global printer admin parameter. See the smb.conf man page for more information on configuring file shares.

The [print$] Share Directory

In order for a Windows NT print server to support the downloading of driver files by multiple client architectures, you must create several subdirectories within the [print$] service (i.e., the UNIX directory named by the path parameter). These correspond to each of the supported client architectures. Samba follows this model as well. Just like the name of the [print$] share itself, the subdirectories must be exactly the names listed below (you may leave out the subdirectories of architectures you do not need to support).

Therefore, create a directory tree below the [print$] share for each architecture you wish to support like this:

[print$]--+
          |--W32X86           # serves drivers to Windows NT x86
          |--WIN40            # serves drivers to Windows 95/98
          |--W32ALPHA         # serves drivers to Windows NT Alpha_AXP
          |--W32MIPS          # serves drivers to Windows NT R4000
          |--W32PPC           # serves drivers to Windows NT PowerPC

Required permissions

In order to add a new driver to your Samba host, one of two conditions must hold true:

  • The account used to connect to the Samba host must have a UID of 0 (i.e., a root account).

  • The account used to connect to the Samba host must be named in the printer adminlist.

Of course, the connected account must still have write access to add files to the subdirectories beneath [print$]. Remember that all file shares are set to “read-only” by default.

Once you have created the required [print$] service and associated subdirectories, go to a Windows NT 4.0/200x/XP client workstation. Open Network Neighborhood or My Network Places and browse for the Samba host. Once you have located the server, navigate to its Printers and Faxes folder. You should see an initial listing of printers that matches the printer shares defined on your Samba host.

Installing Drivers into [print$]

Have you successfully created the [print$] share in smb.conf, and have your forced Samba to re-read its smb.conf file? Good. But you are not yet ready to use the new facility. The client driver files need to be installed into this share. So far it is still an empty share. Unfortunately, it is not enough to just copy the driver files over. They need to be correctly installed so that appropriate records for each driver will exist in the Samba internal databases so it can provide the correct drivers as they are requested from MS Windows clients. And that is a bit tricky, to say the least. We now discuss two alternative ways to install the drivers into [print$]:

  • Using the Samba commandline utility rpcclient with its various subcommands (here: adddriver and setdriver) from any UNIX workstation.

  • Running a GUI (Printer Properties and Add Printer Wizard) from any Windows NT/200x/XP client workstation.

The latter option is probably the easier one (even if the process may seem a little bit weird at first).

Add Printer Wizard Driver Installation

The initial listing of printers in the Samba host's Printers folder accessed from a client's Explorer will have no real printer driver assigned to them. By default this driver name is set to a null string. This must be changed now. The local Add Printer Wizard (APW), run from NT/2000/XP clients, will help us in this task.

Installation of a valid printer driver is not straightforward. You must attempt to view the printer properties for the printer to which you want the driver assigned. Open the Windows Explorer, open Network Neighborhood, browse to the Samba host, open Samba's Printers folder, right-click on the printer icon and select Properties.... You are now trying to view printer and driver properties for a queue that has this default NULL driver assigned. This will result in the following error message:

Device settings cannot be displayed. The driver for the specified printer is not installed, only spooler properties will be displayed. Do you want to install the driver now?

Do not click on Yes! Instead, click on No in the error dialog. Only now you will be presented with the printer properties window. From here, the way to assign a driver to a printer is open to us. You now have the choice of:

  • Select a driver from the pop-up list of installed drivers. Initially this list will be empty.

  • Click on New Driver to install a new printer driver (which will start up the APW).

Once the APW is started, the procedure is exactly the same as the one you are familiar with in Windows (we assume here that you are familiar with the printer driver installations procedure on Windows NT). Make sure your connection is, in fact, setup as a user with printer admin privileges (if in doubt, use smbstatus to check for this). If you wish to install printer drivers for client operating systems other than Windows NT x86, you will need to use the Sharing tab of the printer properties dialog.

Assuming you have connected with an administrative (or root) account (as named by the printer admin parameter), you will also be able to modify other printer properties such as ACLs and default device settings using this dialog. For the default device settings, please consider the advice given further in .

Installing Print Drivers Using rpcclient

The second way to install printer drivers into [print$] and set them up in a valid way is to do it from the UNIX command line. This involves four distinct steps:

  1. Gather info about required driver files and collect the files.

  2. Deposit the driver files into the [print$] share's correct subdirectories (possibly by using smbclient).

  3. Run the rpcclient command line utility once with the adddriver subcommand.

  4. Run rpcclient a second time with the setdriver subcommand.

We provide detailed hints for each of these steps in the paragraphs that follow.

Identifying Driver Files

To find out about the driver files, you have two options. You could check the contents of the driver CDROM that came with your printer. Study the *.inf files lcoated on the CDROM. This may not be possible, since the *.inf file might be missing. Unfortunately, vendors have now started to use their own installation programs. These installations packages are often in some Windows platform archive format. Additionally, the files may be re-named during the installation process. This makes it extremely difficult to identify the driver files required.

Then you only have the second option. Install the driver locally on a Windows client and investigate which file names and paths it uses after they are installed. (You need to repeat this procedure for every client platform you want to support. We show it here for the W32X86 platform only, a name used by Microsoft for all Windows NT/200x/XP clients.)

A good method to recognize the driver files is to print the test page from the driver's Properties dialog (General tab). Then look at the list of driver files named on the printout. You'll need to recognize what Windows (and Samba) are calling the Driver File, Data File, Config File, Help File and (optionally) the Dependent Driver Files (this may vary slightly for Windows NT). You need to take a note of all file names for the next steps.

Another method to quickly test the driver filenames and related paths is provided by the rpcclient utility. Run it with enumdrivers or with the getdriver subcommand, each at the 3 info level. In the following example, TURBO_XP is the name of the Windows PC (in this case it was a Windows XP Professional laptop). I installed the driver locally to TURBO_XP, from a Samba server called KDE-BITSHOP. We could run an interactive rpcclient session; then we would get an rpcclient /> prompt and would type the subcommands at this prompt. This is left as a good exercise to the reader. For now, we use rpcclient with the -c parameter to execute a single subcommand line and exit again. This is the method you would use if you want to create scripts to automate the procedure for a large number of printers and drivers. Note the different quotes used to overcome the different spaces in between words:

root# rpcclient -U'Danka%xxxx' -c \
	'getdriver "Heidelberg Digimaster 9110 (PS)" 3' TURBO_XP
cmd = getdriver "Heidelberg Digimaster 9110 (PS)" 3

[Windows NT x86]
Printer Driver Info 3:
  Version: [2]
  Driver Name: [Heidelberg Digimaster 9110 (PS)]
  Architecture: [Windows NT x86]
  Driver Path: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01_de.DLL]
  Datafile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.ppd]
  Configfile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01U_de.DLL]
  Helpfile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01U_de.HLP]
  
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.DLL]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.INI]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.dat]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.cat]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.def]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hre]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.vnd]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hlp]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01Aux.dll]
  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01_de.NTF]
  
  Monitorname: []
  Defaultdatatype: []

You may notice that this driver has quite a large number of Dependent files (there are worse cases, however). Also, strangely, the Driver File is tagged here Driver Path. We do not yet have support for the so-called WIN40 architecture installed. This name is used by Microsoft for the Windows 9x/Me platforms. If we want to support these, we need to install the Windows 9x/Me driver files in addition to those for W32X86 (i.e., the Windows NT72000/XP clients) onto a Windows PC. This PC can also host the Windows 9x/Me drivers, even if it runs on Windows NT, 2000 or XP.

Since the [print$] share is usually accessible through the Network Neighborhood, you can also use the UNC notation from Windows Explorer to poke at it. The Windows 9x/Me driver files will end up in subdirectory 0 of the WIN40 directory. The full path to access them will be \\WINDOWSHOST\print$\WIN40\0\.

Note

More recent drivers on Windows 2000 and Windows XP are installed into the “3” subdirectory instead of the “2”. The version 2 of drivers, as used in Windows NT, were running in Kernel Mode. Windows 2000 changed this. While it still can use the Kernel Mode drivers (if this is enabled by the Admin), its native mode for printer drivers is User Mode execution. This requires drivers designed for this. These types of drivers install into the “3” subdirectory.

Obtaining Driver Files from Windows Client [print$] Shares

Now we need to collect all the driver files we identified in our previous step. Where do we get them from? Well, why not retrieve them from the very PC and the same [print$] share that we investigated in our last step to identify the files? We can use smbclient to do this. We will use the paths and names that were leaked to us by getdriver. The listing is edited to include linebreaks for readability:

root# smbclient //TURBO_XP/print\$ -U'Danka%xxxx' \ 
   -c 'cd W32X86/2;mget HD*_de.* hd*ppd Hd*_de.* Hddm*dll HDN*Aux.DLL'

added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
Got a positive name query response from 10.160.50.8 ( 10.160.50.8 )
Domain=[DEVELOPMENT] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Get file Hddm91c1_de.ABD? n
Get file Hddm91c1_de.def? y
getting file \W32X86\2\Hddm91c1_de.def of size 428 as Hddm91c1_de.def
Get file Hddm91c1_de.DLL? y
getting file \W32X86\2\Hddm91c1_de.DLL of size 876544 as Hddm91c1_de.DLL
[...]

After this command is complete, the files are in our current local directory. You probably have noticed that this time we passed several commands to the -c parameter, separated by semi-colons. This effects that all commands are executed in sequence on the remote Windows server before smbclient exits again.

Remember to repeat the procedure for the WIN40 architecture should you need to support Windows 9x/Me/XP clients. Remember too, the files for these architectures are in the WIN40/0/ subdirectory. Once this is complete, we can run smbclient ... put to store the collected files on the Samba server's [print$] share.

Installing Driver Files into [print$]

We are now going to locate the driver files into the [print$] share. Remember, the UNIX path to this share has been defined previously in your words missing here. You also have created subdirectories for the different Windows client types you want to support. Supposing your [print$] share maps to the UNIX path /etc/samba/drivers/, your driver files should now go here:

  • For all Windows NT, 2000 and XP clients into /etc/samba/drivers/W32X86/ but not (yet) into the 2 subdirectory.

  • For all Windows 95, 98 and ME clients into /etc/samba/drivers/WIN40/ but not (yet) into the 0 subdirectory.

We again use smbclient to transfer the driver files across the network. We specify the same files and paths as were leaked to us by running getdriver against the original Windows install. However, now we are going to store the files into a Samba/UNIX print server's [print$] share.

root# smbclient //SAMBA-CUPS/print\$ -U'root%xxxx' -c \
  'cd W32X86; put HDNIS01_de.DLL; \
  put Hddm91c1_de.ppd; put HDNIS01U_de.DLL;        \
  put HDNIS01U_de.HLP; put Hddm91c1_de.DLL;        \
  put Hddm91c1_de.INI; put Hddm91c1KMMin.DLL;      \
  put Hddm91c1_de.dat; put Hddm91c1_de.dat;        \
  put Hddm91c1_de.def; put Hddm91c1_de.hre;        \
  put Hddm91c1_de.vnd; put Hddm91c1_de.hlp;        \
  put Hddm91c1_de_reg.HLP; put HDNIS01Aux.dll;     \
  put HDNIS01_de.NTF'

added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
putting file HDNIS01_de.DLL as \W32X86\HDNIS01_de.DLL
putting file Hddm91c1_de.ppd as \W32X86\Hddm91c1_de.ppd
putting file HDNIS01U_de.DLL as \W32X86\HDNIS01U_de.DLL
putting file HDNIS01U_de.HLP as \W32X86\HDNIS01U_de.HLP
putting file Hddm91c1_de.DLL as \W32X86\Hddm91c1_de.DLL
putting file Hddm91c1_de.INI as \W32X86\Hddm91c1_de.INI
putting file Hddm91c1KMMin.DLL as \W32X86\Hddm91c1KMMin.DLL
putting file Hddm91c1_de.dat as \W32X86\Hddm91c1_de.dat
putting file Hddm91c1_de.dat as \W32X86\Hddm91c1_de.dat
putting file Hddm91c1_de.def as \W32X86\Hddm91c1_de.def
putting file Hddm91c1_de.hre as \W32X86\Hddm91c1_de.hre
putting file Hddm91c1_de.vnd as \W32X86\Hddm91c1_de.vnd
putting file Hddm91c1_de.hlp as \W32X86\Hddm91c1_de.hlp
putting file Hddm91c1_de_reg.HLP as \W32X86\Hddm91c1_de_reg.HLP
putting file HDNIS01Aux.dll as \W32X86\HDNIS01Aux.dll
putting file HDNIS01_de.NTF as \W32X86\HDNIS01_de.NTF

Whew that was a lot of typing! Most drivers are a lot smaller many only having three generic PostScript driver files plus one PPD. While we did retrieve the files from the 2 subdirectory of the W32X86 directory from the Windows box, we do not put them (for now) in this same subdirectory of the Samba box. This relocation will automatically be done by the adddriver command, which we will run shortly (and do not forget to also put the files for the Windows 9x/Me architecture into the WIN40/ subdirectory should you need them).

smbclient to Confirm Driver Installation

For now we verify that our files are there. This can be done with smbclient, too (but, of course, you can log in via SSH also and do this through a standard UNIX shell access):

root# smbclient //SAMBA-CUPS/print\$ -U 'root%xxxx' \
	-c 'cd W32X86; pwd; dir; cd 2; pwd; dir'
 added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.8a]

Current directory is \\SAMBA-CUPS\print$\W32X86\
.                                  D        0  Sun May  4 03:56:35 2003
..                                 D        0  Thu Apr 10 23:47:40 2003
2                                   D        0  Sun May  4 03:56:18 2003
HDNIS01Aux.dll                      A    15356  Sun May  4 03:58:59 2003
Hddm91c1KMMin.DLL                   A    46966  Sun May  4 03:58:59 2003
HDNIS01_de.DLL                      A   434400  Sun May  4 03:58:59 2003
HDNIS01_de.NTF                      A   790404  Sun May  4 03:56:35 2003
Hddm91c1_de.DLL                     A   876544  Sun May  4 03:58:59 2003
Hddm91c1_de.INI                     A      101  Sun May  4 03:58:59 2003
Hddm91c1_de.dat                     A     5044  Sun May  4 03:58:59 2003
Hddm91c1_de.def                     A      428  Sun May  4 03:58:59 2003
Hddm91c1_de.hlp                     A    37699  Sun May  4 03:58:59 2003
Hddm91c1_de.hre                     A   323584  Sun May  4 03:58:59 2003
Hddm91c1_de.ppd                     A    26373  Sun May  4 03:58:59 2003
Hddm91c1_de.vnd                     A    45056  Sun May  4 03:58:59 2003
HDNIS01U_de.DLL                     A   165888  Sun May  4 03:58:59 2003
HDNIS01U_de.HLP                     A    19770  Sun May  4 03:58:59 2003
Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 03:58:59 2003
              40976 blocks of size 262144. 709 blocks available

Current directory is \\SAMBA-CUPS\print$\W32X86\2\
.                                  D        0  Sun May  4 03:56:18 2003
..                                 D        0  Sun May  4 03:56:35 2003
ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
ADOBEPSU.DLL                        A   109568  Sat May  3 23:18:45 2003
ADOBEPSU.HLP                        A    18082  Sat May  3 23:18:45 2003
PDFcreator2.PPD                     A    15746  Sun Apr 20 22:24:07 2003
              40976 blocks of size 262144. 709 blocks available

Notice that there are already driver files present in the 2 subdirectory (probably from a previous installation). Once the files for the new driver are there too, you are still a few steps away from being able to use them on the clients. The only thing you could do now is to retrieve them from a client just like you retrieve ordinary files from a file share, by opening print$ in Windows Explorer. But that wouldn't install them per Point'n'Print. The reason is: Samba does not yet know that these files are something special, namely printer driver files and it does not know to which print queue(s) these driver files belong.

Running rpcclient with adddriver

Next, you must tell Samba about the special category of the files you just uploaded into the [print$] share. This is done by the adddriver command. It will prompt Samba to register the driver files into its internal TDB database files. The following command and its output has been edited, again, for readability:

root# rpcclient -Uroot%xxxx -c 'adddriver "Windows NT x86" \
  "dm9110:HDNIS01_de.DLL: \
  Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
  NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
  HDNIS01Aux.dll,HDNIS01_de.NTF,                     \
  Hddm91c1_de_reg.HLP' SAMBA-CUPS

cmd = adddriver "Windows NT x86" \
  "dm9110:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:   \
  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \
  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,          \
  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,        \
  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"

Printer Driver dm9110 successfully installed.

After this step, the driver should be recognized by Samba on the print server. You need to be very careful when typing the command. Don't exchange the order of the fields. Some changes would lead to an NT_STATUS_UNSUCCESSFUL error message. These become obvious. Other changes might install the driver files successfully, but render the driver unworkable. So take care! Hints about the syntax of the adddriver command are in the man page. The CUPS printing chapter provides a more detailed description, should you need it.

Checking adddriver Completion

One indication for Samba's recognition of the files as driver files is the successfully installed message. Another one is the fact that our files have been moved by the adddriver command into the 2 subdirectory. You can check this again with smbclient:

root# smbclient //SAMBA-CUPS/print\$ -Uroot%xx \
	-c 'cd W32X86;dir;pwd;cd 2;dir;pwd'
 added interface ip=10.160.51.162 bcast=10.160.51.255 nmask=255.255.252.0
 Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]

  Current directory is \\SAMBA-CUPS\print$\W32X86\
  .                                  D        0  Sun May  4 04:32:48 2003
  ..                                 D        0  Thu Apr 10 23:47:40 2003
  2                                   D        0  Sun May  4 04:32:48 2003
                40976 blocks of size 262144. 731 blocks available 

  Current directory is \\SAMBA-CUPS\print$\W32X86\2\
  .                                  D        0  Sun May  4 04:32:48 2003
  ..                                 D        0  Sun May  4 04:32:48 2003
  DigiMaster.PPD                      A   148336  Thu Apr 24 01:07:00 2003
  ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
  laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
  ADOBEPSU.DLL                        A   109568  Sat May  3 23:18:45 2003
  ADOBEPSU.HLP                        A    18082  Sat May  3 23:18:45 2003
  PDFcreator2.PPD                     A    15746  Sun Apr 20 22:24:07 2003
  HDNIS01Aux.dll                      A    15356  Sun May  4 04:32:18 2003
  Hddm91c1KMMin.DLL                   A    46966  Sun May  4 04:32:18 2003
  HDNIS01_de.DLL                      A   434400  Sun May  4 04:32:18 2003
  HDNIS01_de.NTF                      A   790404  Sun May  4 04:32:18 2003
  Hddm91c1_de.DLL                     A   876544  Sun May  4 04:32:18 2003
  Hddm91c1_de.INI                     A      101  Sun May  4 04:32:18 2003
  Hddm91c1_de.dat                     A     5044  Sun May  4 04:32:18 2003
  Hddm91c1_de.def                     A      428  Sun May  4 04:32:18 2003
  Hddm91c1_de.hlp                     A    37699  Sun May  4 04:32:18 2003
  Hddm91c1_de.hre                     A   323584  Sun May  4 04:32:18 2003
  Hddm91c1_de.ppd                     A    26373  Sun May  4 04:32:18 2003
  Hddm91c1_de.vnd                     A    45056  Sun May  4 04:32:18 2003
  HDNIS01U_de.DLL                     A   165888  Sun May  4 04:32:18 2003
  HDNIS01U_de.HLP                     A    19770  Sun May  4 04:32:18 2003
  Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 04:32:18 2003
                40976 blocks of size 262144. 731 blocks available

Another verification is that the timestamp of the printing TDB files is now updated (and possibly their file size has increased).

Check Samba for Driver Recognition

Now the driver should be registered with Samba. We can easily verify this, and will do so in a moment. However, this driver is not yet associated with a particular printer. We may check the driver status of the files by at least three methods:

  • From any Windows client browse Network Neighborhood, find the Samba host and open the Samba Printers and Faxes folder. Select any printer icon, right-click and select the printer Properties. Click the Advanced tab. Here is a field indicating the driver for that printer. A drop-down menu allows you to change that driver (be careful not to do this unwittingly). You can use this list to view all drivers known to Samba. Your new one should be among them. (Each type of client will only see his own architecture's list. If you do not have every driver installed for each platform, the list will differ if you look at it from Windows95/98/ME or WindowsNT/2000/XP.)

  • From a Windows 200x/XP client (not Windows NT) browse Network Neighborhood, search for the Samba server and open the server's Printers folder, right-click on the white background (with no printer highlighted). Select Server Properties. On the Drivers tab you will see the new driver listed. This view enables you to also inspect the list of files belonging to that driver (this does not work on Windows NT, but only on Windows 2000 and Windows XP; Windows NT does not provide the Drivers tab). An alternative and much quicker method for Windows 2000/XP to start this dialog is by typing into a DOS box (you must of course adapt the name to your Samba server instead of SAMBA-CUPS):

    rundll32 printui.dll,PrintUIEntry /s /t2 /n\\SAMBA-CUPS

  • From a UNIX prompt, run this command (or a variant thereof) where SAMBA-CUPS is the name of the Samba host and xxxx represents the actual Samba password assigned to root:

    rpcclient -U'root%xxxx' -c 'enumdrivers' SAMBA-CUPS

    You will see a listing of all drivers Samba knows about. Your new one should be among them. But it is only listed under the [Windows NT x86] heading, not under [Windows 4.0], since you didn't install that part. Or did you? You will see a listing of all drivers Samba knows about. Your new one should be among them. In our example it is named dm9110. Note that the third column shows the other installed drivers twice, one time for each supported architecture. Our new driver only shows up for Windows NT 4.0 or 2000. To have it present for Windows 95, 98 and ME, you'll have to repeat the whole procedure with the WIN40 architecture and subdirectory.

Specific Driver Name Flexibility

You can name the driver as you like. If you repeat the adddriver step with the same files as before but with a different driver name, it will work the same:

root# rpcclient -Uroot%xxxx         \
  -c 'adddriver "Windows NT x86"                     \
  "mydrivername:HDNIS01_de.DLL:              \
  Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
  NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP' SAMBA-CUPS
  

cmd = adddriver "Windows NT x86" \
 "mydrivername:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:\
  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,           \
  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,                    \
  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,                  \
  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"

Printer Driver mydrivername successfully installed.

You will be able to bind that driver to any print queue (however, you are responsible that you associate drivers to queues that make sense with respect to target printers). You cannot run the rpcclient adddriver command repeatedly. Each run consumes the files you had put into the [print$] share by moving them into the respective subdirectories. So you must execute an smbclient ... put command before each rpcclient ... adddriver command.

Running rpcclient with the setdriver

Samba needs to know which printer owns which driver. Create a mapping of the driver to a printer, and store this info in Samba's memory, the TDB files. The rpcclient setdriver command achieves exactly this:

root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 mydrivername' SAMBA-CUPS
 cmd = setdriver dm9110 mydrivername

Successfully set dm9110 to driver mydrivername.

Ah, no, I did not want to do that. Repeat, this time with the name I intended:

root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 dm9110' SAMBA-CUPS
 cmd = setdriver dm9110 dm9110
Successfully set dm9110 to driver dm9110.

The syntax of the command is:

rpcclient -U'root%sambapassword' -c 'setdriver printername \
 drivername' SAMBA-Hostname. 

Now we have done most of the work, but not all of it.

Note

The setdriver command will only succeed if the printer is already known to Samba. A bug in 2.2.x prevented Samba from recognizing freshly installed printers. You had to restart Samba, or at least send an HUP signal to all running smbd processes to work around this: kill -HUP `pidof smbd`.

Client Driver Installation Procedure

As Don Quixote said: “The proof of the pudding is in the eating.” The proof for our setup lies in the printing. So let's install the printer driver onto the client PCs. This is not as straightforward as it may seem. Read on.

First Client Driver Installation

Especially important is the installation onto the first client PC (for each architectural platform separately). Once this is done correctly, all further clients are easy to setup and shouldn't need further attention. What follows is a description for the recommended first procedure. You work now from a client workstation. You should guarantee that your connection is not unwittingly mapped to bad user nobody. In a DOS box type:

net use \\SAMBA-SERVER\print$ /user:root

Replace root, if needed, by another valid printer admin user as given in the definition. Should you already be connected as a different user, you will get an error message. There is no easy way to get rid of that connection, because Windows does not seem to know a concept of logging off from a share connection (do not confuse this with logging off from the local workstation; that is a different matter). You can try to close all Windows file explorer and Internet Explorer for Windows. As a last resort, you may have to reboot. Make sure there is no automatic reconnection set up. It may be easier to go to a different workstation and try from there. After you have made sure you are connected as a printer admin user (you can check this with the smbstatus command on Samba), do this from the Windows workstation:

  1. Open Network Neighborhood.

  2. Browse to Samba server.

  3. Open its Printers and Faxes folder.

  4. Highlight and right-click on the printer.

  5. Select Connect (for Windows NT4/200x it is possibly Install).

A new printer (named printername on Samba-server) should now have appeared in your local Printer folder (check Start -- Settings -- Control Panel -- Printers and Faxes).

Most likely you are now tempted to try to print a test page. After all, you now can open the printer properties, and on the General tab there is a button offering to do just that. But chances are that you get an error message saying Unable to print Test Page. The reason might be that there is not yet a valid Device Mode set for the driver, or that the “Printer Driver Data” set is still incomplete.

You must make sure that a valid Device Mode is set for the driver. We now explain what that means.

Setting Device Modes on New Printers

For a printer to be truly usable by a Windows NT/200x/XP client, it must possess:

  • A valid Device Mode generated by the driver for the printer (defining things like paper size, orientation and duplex settings).

  • A complete set of Printer Driver Data generated by the driver.

If either of these is incomplete, the clients can produce less than optimal output at best. In the worst cases, unreadable garbage or nothing at all comes from the printer or it produces a harvest of error messages when attempting to print. Samba stores the named values and all printing related information in its internal TDB database files (ntprinters.tdb, ntdrivers.tdb, printing.tdb and ntforms.tdb).

What do these two words stand for? Basically, the Device Mode and the set of Printer Driver Data is a collection of settings for all print queue properties, initialized in a sensible way. Device Modes and Printer Driver Data should initially be set on the print server (the Samba host) to healthy values so the clients can start to use them immediately. How do we set these initial healthy values? This can be achieved by accessing the drivers remotely from an NT (or 200x/XP) client, as is discussed in the following paragraphs.

Be aware that a valid Device Mode can only be initiated by a printer admin, or root (the reason should be obvious). Device Modes can only be correctly set by executing the printer driver program itself. Since Samba cannot execute this Win32 platform driver code, it sets this field initially to NULL (which is not a valid setting for clients to use). Fortunately, most drivers automatically generate the Printer Driver Data that is needed when they are uploaded to the [print$] share with the help of the APW or rpcclient.

The generation and setting of a first valid Device Mode, however, requires some tickling from a client, to set it on the Samba server. The easiest means of doing so is to simply change the page orientation on the server's printer. This executes enough of the printer driver program on the client for the desired effect to happen, and feeds back the new Device Mode to our Samba server. You can use the native Windows NT/200x/XP printer properties page from a Window client for this:

  1. Browse the Network Neighborhood.

  2. Find the Samba server.

  3. Open the Samba server's Printers and Faxes folder.

  4. Highlight the shared printer in question.

  5. Right-click on the printer (you may already be here, if you followed the last section's description).

  6. At the bottom of the context menu select Properties (if the menu still offers the Connect entry further above, you need to click on that one first to achieve the driver installation as shown in the last section).

  7. Go to the Advanced tab; click on Printing Defaults.

  8. Change the Portrait page setting to Landscape (and back).

  9. Make sure to apply changes between swapping the page orientation to cause the change to actually take effect.

  10. While you are at it, you may also want to set the desired printing defaults here, which then apply to all future client driver installations on the remaining from now on.

This procedure has executed the printer driver program on the client platform and fed back the correct Device Mode to Samba, which now stored it in its TDB files. Once the driver is installed on the client, you can follow the analogous steps by accessing the local Printers folder, too, if you are a Samba printer admin user. From now on, printing should work as expected.

Samba includes a service level parameter name default devmode for generating a default Device Mode for a printer. Some drivers will function well with Samba's default set of properties. Others may crash the client's spooler service. So use this parameter with caution. It is always better to have the client generate a valid device mode for the printer and store it on the server for you.

Additional Client Driver Installation

Every additional driver may be installed, along the lines described above. Browse network, open the Printers folder on Samba server, right-click on Printer and choose Connect.... Once this completes (should be not more than a few seconds, but could also take a minute, depending on network conditions), you should find the new printer in your client workstation local Printers and Faxes folder.

You can also open your local Printers and Faxes folder by using this command on Windows 200x/XP Professional workstations:

rundll32 shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder

or this command on Windows NT 4.0 workstations:

rundll32 shell32.dll,Control_RunDLL MAIN.CPL @2

You can enter the commands either inside a DOS box window or in the Run command... field from the Start menu.

Always Make First Client Connection as root or “printer admin

After you installed the driver on the Samba server (in its [print$] share, you should always make sure that your first client installation completes correctly. Make it a habit for yourself to build the very first connection from a client as printer admin. This is to make sure that:

  • A first valid Device Mode is really initialized (see above for more explanation details).

  • The default print settings of your printer for all further client installations are as you want them.

Do this by changing the orientation to landscape, click on Apply, and then change it back again. Next, modify the other settings (for example, you do not want the default media size set to Letter when you are all using A4, right? You may want to set the printer for duplex as the default, and so on).

To connect as root to a Samba printer, try this command from a Windows 200x/XP DOS box command prompt:

C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /p /t3 /n 
	\\SAMBA-SERVER\printername"

You will be prompted for root's Samba-password; type it, wait a few seconds, click on Printing Defaults, and proceed to set the job options that should be used as defaults by all clients. Alternately, instead of root you can name one other member of the printer admin from the setting.

Now all the other users downloading and installing the driver the same way (called “Point'n'Print”) will have the same defaults set for them. If you miss this step you'll get a lot of Help Desk calls from your users, but maybe you like to talk to people.

Other Gotchas

Your driver is installed. It is now ready for Point'n'Print installation by the clients. You may have tried to download and use it onto your first client machine, but wait. Let's make sure you are acquainted first with a few tips and tricks you may find useful. For example, suppose you did not set the defaults on the printer, as advised in the preceding paragraphs. Your users complain about various issues (such as, “We need to set the paper size for each job from Letter to A4 and it will not store it.”)

Setting Default Print Options for Client Drivers

The last sentence might be viewed with mixed feelings by some users and admins. They have struggled for hours and could not arrive at a point where their settings seemed to be saved. It is not their fault. The confusing thing is that in the multi-tabbed dialog that pops up when you right-click on the printer name and select Properties, you can arrive at two dialogs that appear identical, each claiming that they help you to set printer options in three different ways. Here is the definite answer to the Samba default driver setting FAQ:

I can not set and save default print options for all users on Windows 200x/XP. Why not?”  How are you doing it? I bet the wrong way. (It is not easy to find out, though). There are three different ways to bring you to a dialog that seems to set everything. All three dialogs look the same, but only one of them does what you intend. You need to be Administrator or Print Administrator to do this for all users. Here is how I reproduce it in an XP Professional: The following list needs periods after the letters and numbers:::::::::

  1. The first “wrong” way:

    1. Open the Printers folder.

    2. Right-click on the printer (remoteprinter on cupshost) and select in context menu Printing Preferences...

    3. Look at this dialog closely and remember what it looks like.

  2. The second “wrong” way:

    1. Open the Printers folder.

    2. Right-click on the printer (remoteprinter on cupshost) and select in the context menu Properties

    3. Click on the General tab

    4. Click on the Printing Preferences...

    5. A new dialog opens. Keep this dialog open and go back to the parent dialog.

  3. The third and correct way: (should you do this from the beginning, just carry out steps 1 and 2 from the second method above).

    1. Click on the Advanced tab. (If everything is “grayed out,” then you are not logged in as a user with enough privileges).

    2. Click on the Printing Defaults button.

    3. On any of the two new tabs, click on the Advanced button.

    4. A new dialog opens. Compare this one to the other. Are they identical looking comparing one from “B.5” and one from A.3".

Do you see any difference in the two settings dialogs? I do not either. However, only the last one, which you arrived at with steps C.1 through 6 will permanently save any settings which will then become the defaults for new users. If you want all clients to have the same defaults, you need to conduct these steps as administrator (printer admin in ) before a client downloads the driver (the clients can later set their own per-user defaults by following procedures A or B above). Windows 200x/XP allow per-user default settings and the ones the administrator gives them, before they set up their own. The parents of the identically-looking dialogs have a slight difference in their window names; one is called Default Print Values for Printer Foo on Server Bar" (which is the one you need) and the other is called “Print Settings for Printer Foo on Server Bar”. The last one is the one you arrive at when you right-click on the printer and select Print Settings.... This is the one that you were taught to use back in the days of Windows NT, so it is only natural to try the same way with Windows 200x/XP. You would not dream that there is now a different path to arrive at an identically looking, but functionally different, dialog to set defaults for all users.

Tip

Try (on Windows 200x/XP) to run this command (as a user with the right privileges):

rundll32 printui.dll,PrintUIEntry /p /t3 /n\\SAMBA-SERVER\printersharename

To see the tab with the Printing Defaults button (the one you need),also run this command:

rundll32 printui.dll,PrintUIEntry /p /t0 /n\\SAMBA-SERVER\printersharename

To see the tab with the Printing Preferences button (the one which does not set system-wide defaults), you can start the commands from inside a DOS box" or from Start -> Run.

Supporting Large Numbers of Printers

One issue that has arisen during the recent development phase of Samba is the need to support driver downloads for hunderds of printers. Using Windows NT APW here is somewhat awkward (to say the least). If you do not want to acquire RSS pains from the printer installation clicking orgy alone, you need to think about a non-interactive script.

If more than one printer is using the same driver, the rpcclient setdriver command can be used to set the driver associated with an installed queue. If the driver is uploaded to [print$] once and registered with the printing TDBs, it can be used by multiple print queues. In this case, you just need to repeat the setprinter subcommand of rpcclient for every queue (without the need to conduct the adddriver repeatedly). The following is an example of how this could be accomplished:

root# rpcclient SAMBA-CUPS -U root%secret -c 'enumdrivers'
 cmd = enumdrivers
 
 [Windows NT x86]
 Printer Driver Info 1:
   Driver Name: [infotec  IS 2075 PCL 6]
 
 Printer Driver Info 1:
   Driver Name: [DANKA InfoStream]
 
 Printer Driver Info 1:
   Driver Name: [Heidelberg Digimaster 9110 (PS)]
 
 Printer Driver Info 1:
   Driver Name: [dm9110]

 Printer Driver Info 1:
   Driver Name: [mydrivername]

 [....]

root# rpcclient SAMBA-CUPS -U root%secret -c 'enumprinters'
 cmd = enumprinters
   flags:[0x800000]
   name:[\\SAMBA-CUPS\dm9110]
   description:[\\SAMBA-CUPS\dm9110,,110ppm HiVolume DANKA Stuttgart]
   comment:[110 ppm HiVolume DANKA Stuttgart]
 [....]

root# rpcclient SAMBA-CUPS -U root%secret -c \
  'setdriver dm9110 "Heidelberg Digimaster 9110 (PS)"'
 cmd = setdriver dm9110 Heidelberg Digimaster 9110 (PPD)
 Successfully set dm9110 to driver Heidelberg Digimaster 9110 (PS).

root# rpcclient SAMBA-CUPS -U root%secret -c 'enumprinters'
 cmd = enumprinters
   flags:[0x800000]
   name:[\\SAMBA-CUPS\dm9110]
   description:[\\SAMBA-CUPS\dm9110,Heidelberg Digimaster 9110 (PS),\
     110ppm HiVolume DANKA Stuttgart]
   comment:[110ppm HiVolume DANKA Stuttgart]
 [....]

root# rpcclient SAMBA-CUPS -U root%secret -c 'setdriver dm9110 mydrivername'
 cmd = setdriver dm9110 mydrivername
 Successfully set dm9110 to mydrivername.

root# rpcclient SAMBA-CUPS -U root%secret -c 'enumprinters'
 cmd = enumprinters
   flags:[0x800000]
   name:[\\SAMBA-CUPS\dm9110]
   description:[\\SAMBA-CUPS\dm9110,mydrivername,\
     110ppm HiVolume DANKA Stuttgart]
   comment:[110ppm HiVolume DANKA Stuttgart]
 [....]

It may not be easy to recognize that the first call to enumprinters showed the “dm9110” printer with an empty string where the driver should have been listed (between the 2 commas in the description field). After the setdriver command succeeded, all is well.

Adding New Printers with the Windows NT APW

By default, Samba exhibits all printer shares defined in smb.conf in the Printers folder. Also located in this folder is the Windows NT Add Printer Wizard icon. The APW will be shown only if:

  • The connected user is able to successfully execute an OpenPrinterEx(\\server) with administrative privileges (i.e., root or printer admin).

    Tip

    Try this from a Windows 200x/XP DOS box command prompt:

    runas /netonly /user:root rundll32 printui.dll,PrintUIEntry /p /t0 /n \\SAMBA-SERVER\printersharename

    Click on Printing Preferences.

  • ... contains the setting show add printer wizard = yes (the default).

The APW can do various things:

  • Upload a new driver to the Samba [print$] share.

  • Associate an uploaded driver with an existing (but still driverless) print queue.

  • Exchange the currently used driver for an existing print queue with one that has been uploaded before.

  • Add an entirely new printer to the Samba host (only in conjunction with a working add printer command. A corresponding delete printer command for removing entries from the Printers folder may also be provided).

The last one (add a new printer) requires more effort than the previous ones. To use the APW to successfully add a printer to a Samba server, the add printer command must have a defined value. The program hook must successfully add the printer to the UNIX print system (i.e., to /etc/printcap, /etc/cups/printers.conf or other appropriate files) and to smb.conf if necessary.

When using the APW from a client, if the named printer share does not exist, smbd will execute the add printer command and reparse to the to attempt to locate the new printer share. If the share is still not defined, an error of Access Denied is returned to the client. The add printer command is executed under the context of the connected user, not necessarily a root account. A map to guest = bad user may have connected you unwittingly under the wrong privilege. You should check it by using the smbstatus command.

Error Message: “Cannot connect under a different Name

Once you are connected with the wrong credentials, there is no means to reverse the situation other than to close all Explorer Windows, and perhaps reboot.

  • The net use \\SAMBA-SERVER\sharename /user:root gives you an error message: “Multiple connections to a server or a shared resource by the same user utilizing the several user names are not allowed. Disconnect all previous connections to the server, resp. the shared resource, and try again.

  • Every attempt to “connect a network drive” to \\SAMBASERVER\\print$ to z: is countered by the pertinacious message: “This network folder is currently connected under different credentials (username and password). Disconnect first any existing connection to this network share in order to connect again under a different username and password”.

So you close all connections. You try again. You get the same message. You check from the Samba side, using smbstatus. Yes, there are more connections. You kill them all. The client still gives you the same error message. You watch the smbd.log file on a high debug level and try reconnect. Same error message, but not a single line in the log. You start to wonder if there was a connection attempt at all. You run ethereal and tcpdump while you try to connect. Result: not a single byte goes on the wire. Windows still gives the error message. You close all Explorer windows and start it again. You try to connect and this times it works! Windows seems to cache connection informtion somewhere and does not keep it up-to-date (if you are unlucky you might need to reboot to get rid of the error message).

Take Care When Assembling Driver Files

You need to be extremely careful when you take notes about the files and belonging to a particular driver. Don't confuse the files for driver version “0” (for Windows 9x/Me, going into [print$]/WIN/0/), driver version 2 (Kernel Mode driver for Windows NT, going into [print$]/W32X86/2/ may be used on Windows 200x/XP also), and driver version “3” (non-Kernel Mode driver going into [print$]/W32X86/3/ cannot be used on Windows NT). Quite often these different driver versions contain files that have the same name but actually are very different. If you look at them from the Windows Explorer (they reside in %WINDOWS%\system32\spool\drivers\W32X86\), you will probably see names in capital letters, while an enumdrivers command from Samba would show mixed or lower case letters. So it is easy to confuse them. If you install them manually using rpcclient and subcommands, you may even succeed without an error message. Only later, when you try install on a client, you will encounter error messages like This server has no appropriate driver for the printer.

Here is an example. You are invited to look closely at the various files, compare their names and their spelling, and discover the differences in the composition of the version 2 and 3 sets. Note: the version 0 set contained 40 Dependentfiles, so I left it out for space reasons:

root# rpcclient -U 'Administrator%secret' -c 'enumdrivers 3' 10.160.50.8 

 Printer Driver Info 3:
         Version: [3]
         Driver Name: [Canon iR8500 PS3]
         Architecture: [Windows NT x86]
         Driver Path: [\\10.160.50.8\print$\W32X86\3\cns3g.dll]
         Datafile: [\\10.160.50.8\print$\W32X86\3\iR8500sg.xpd]
         Configfile: [\\10.160.50.8\print$\W32X86\3\cns3gui.dll]
         Helpfile: [\\10.160.50.8\print$\W32X86\3\cns3g.hlp]
 
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\aucplmNT.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\ucs32p.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\tnl32.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\aussdrv.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cnspdc.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\aussapi.dat]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cns3407.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\CnS3G.cnt]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\NBAPI.DLL]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\NBIPC.DLL]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcview.exe]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcdspl.exe]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcedit.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcqm.exe]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcspl.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cfine32.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcr407.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\Cpcqm407.hlp]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cpcqm407.cnt]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\3\cns3ggr.dll]
 
         Monitorname: []
         Defaultdatatype: []

 Printer Driver Info 3:
         Version: [2]
         Driver Name: [Canon iR5000-6000 PS3]
         Architecture: [Windows NT x86]
         Driver Path: [\\10.160.50.8\print$\W32X86\2\cns3g.dll]
         Datafile: [\\10.160.50.8\print$\W32X86\2\IR5000sg.xpd]
         Configfile: [\\10.160.50.8\print$\W32X86\2\cns3gui.dll]
         Helpfile: [\\10.160.50.8\print$\W32X86\2\cns3g.hlp]
 
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\AUCPLMNT.DLL]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\aussdrv.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\cnspdc.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\aussapi.dat]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\cns3407.dll]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\CnS3G.cnt]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\NBAPI.DLL]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\NBIPC.DLL]
         Dependentfiles: [\\10.160.50.8\print$\W32X86\2\cns3gum.dll]
 
         Monitorname: [CPCA Language Monitor2]
         Defaultdatatype: []

If we write the “version 2” files and the “version 3” files into different text files and compare the result, we see this picture:

root# sdiff 2-files 3-files


 cns3g.dll                     cns3g.dll
 iR8500sg.xpd                  iR8500sg.xpd
 cns3gui.dll                   cns3gui.dll
 cns3g.hlp                     cns3g.hlp
 AUCPLMNT.DLL                | aucplmNT.dll
                             > ucs32p.dll
                             > tnl32.dll
 aussdrv.dll                   aussdrv.dll
 cnspdc.dll                    cnspdc.dll
 aussapi.dat                   aussapi.dat
 cns3407.dll                   cns3407.dll
 CnS3G.cnt                     CnS3G.cnt
 NBAPI.DLL                     NBAPI.DLL
 NBIPC.DLL                     NBIPC.DLL
 cns3gum.dll                 | cpcview.exe
                             > cpcdspl.exe 
                             > cpcqm.exe
                             > cpcspl.dll
                             > cfine32.dll
                             > cpcr407.dll
                             > Cpcqm407.hlp
                             > cpcqm407.cnt
                             > cns3ggr.dll

Do not be fooled! Driver files for each version with identical names may be different in their content, as you can see from this size comparison:

root# for i in cns3g.hlp cns3gui.dll cns3g.dll; do                  \
           smbclient //10.160.50.8/print\$ -U 'Administrator%xxxx' \
           -c "cd W32X86/3; dir $i; cd .. ; cd 2; dir $i";      \
		   done

  CNS3G.HLP               A   122981  Thu May 30 02:31:00 2002
  CNS3G.HLP               A    99948  Thu May 30 02:31:00 2002

  CNS3GUI.DLL             A  1805824  Thu May 30 02:31:00 2002
  CNS3GUI.DLL             A  1785344  Thu May 30 02:31:00 2002

  CNS3G.DLL               A  1145088  Thu May 30 02:31:00 2002
  CNS3G.DLL               A    15872  Thu May 30 02:31:00 2002

In my example were even more differences than shown here. Conclusion: you must be careful to select the correct driver files for each driver version. Don't rely on the names alone and don't interchange files belonging to different driver versions.

Samba and Printer Ports

Windows NT/2000 print servers associate a port with each printer. These normally take the form of LPT1:, COM1:, FILE:, and so on. Samba must also support the concept of ports associated with a printer. By default, only one printer port, named “Samba Printer Port”, exists on a system. Samba does not really need such a “port” in order to print; rather it is a requirement of Windows clients. They insist on being told about an available port when they request this information, otherwise they throw an error message at you. So Samba fakes the port information to keep the Windows clients happy.

Samba does not support the concept of Printer Pooling internally either. Printer Pooling assigns a logical printer to multiple ports as a form of load balancing or fail over.

If you require multiple ports be defined for some reason or another (my users and my boss should not know that they are working with Samba), configure enumports command which can be used to define an external program that generates a listing of ports on a system.

Avoiding Common Client Driver Misconfiguration

So now the printing works, but there are still problems. Most jobs print well, some do not print at all. Some jobs have problems with fonts, which do not look good. Some jobs print fast and some are dead-slow. We cannot cover it all, but we want to encourage you to read the brief paragraph about “Avoiding the Wrong PostScript Driver Settings” in the CUPS Printing part of this document.

The Imprints Toolset

The Imprints tool set provides a UNIX equivalent of the Windows NT Add Printer Wizard. For complete information, please refer to the Imprints Web site at http://imprints.sourceforge.net/ as well as the documentation included with the imprints source distribution. This section only provides a brief introduction to the features of Imprints.

Unfortunately, the Imprints toolset is no longer maintained. As of December 2000, the project is in need of a new maintainer. The most important skill to have is Perl coding and an interest in MS-RPC-based printing used in Samba. If you wish to volunteer, please coordinate your efforts on the Samba technical mailing list. The toolset is still in usable form, but only for a series of older printer models where there are prepared packages to use. Packages for more up-to-date print devices are needed if Imprints should have a future.

What is Imprints?

Imprints is a collection of tools for supporting these goals:

  • Providing a central repository of information regarding Windows NT and 95/98 printer driver packages.

  • Providing the tools necessary for creating the Imprints printer driver packages.

  • Providing an installation client that will obtain printer drivers from a central Internet (or intranet) Imprints Server repository and install them on remote Samba and Windows NT4 print servers.

Creating Printer Driver Packages

The process of creating printer driver packages is beyond the scope of this document (refer to Imprints.txt also included with the Samba distribution for more information). In short, an Imprints driver package is a gzipped tarball containing the driver files, related INF files, and a control file needed by the installation client.

The Imprints Server

The Imprints server is really a database server that may be queried via standard HTTP mechanisms. Each printer entry in the database has an associated URL for the actual downloading of the package. Each package is digitally signed via GnuPG which can be used to verify that the package downloaded is actually the one referred in the Imprints database. It is strongly recommended that this security check not be disabled.

The Installation Client

More information regarding the Imprints installation client is available from the the documentation file Imprints-Client-HOWTO.ps that is included with the Imprints source package. The Imprints installation client comes in two forms:

  • A set of command line Perl scripts.

  • A GTK+ based graphical interface to the command line Perl scripts.

The installation client (in both forms) provides a means of querying the Imprints database server for a matching list of known printer model names as well as a means to download and install the drivers on remote Samba and Windows NT print servers.

The basic installation process is in four steps and Perl code is wrapped around smbclient and rpcclient.

  • For each supported architecture for a given driver:

    1. rpcclient: Get the appropriate upload directory on the remote server.

    2. smbclient: Upload the driver files.

    3. rpcclient: Issues an AddPrinterDriver() MS-RPC.

  • rpcclient: Issue an AddPrinterEx() MS-RPC to actually create the printer.

One of the problems encountered when implementing the Imprints tool set was the name space issues between various supported client architectures. For example, Windows NT includes a driver named “Apple LaserWriter II NTX v51.8” and Windows 95 calls its version of this driver “Apple LaserWriter II NTX”.

The problem is how to know what client drivers have been uploaded for a printer. An astute reader will remember that the Windows NT Printer Properties dialog only includes space for one printer driver name. A quick look in the Windows NT 4.0 system registry at:

HKLM\System\CurrentControlSet\Control\Print\Environment

will reveal that Windows NT always uses the NT driver name. This is okay as Windows NT always requires that at least the Windows NT version of the printer driver is present. Samba does not have the requirement internally, therefore, “How can you use the NT driver name if it has not already been installed?

The way of sidestepping this limitation is to require that all Imprints printer driver packages include both the Intel Windows NT and 95/98 printer drivers and that the NT driver is installed first.

Adding Network Printers without User Interaction

The following MS Knowledge Base article may be of some help if you need to handle Windows 2000 clients: How to Add Printers with No User Interaction in Windows 2000, (http://support.microsoft.com/default.aspx?scid=kb;en-us;189105). It also applies to Windows XP Professional clients. The ideas sketched out in this section are inspired by this article, which describes a commandline method that can be applied to install network and local printers and their drivers. This is most useful if integrated in Logon Scripts. You can see what options are available by typing in the command prompt (DOS box):

rundll32 printui.dll,PrintUIEntry /?

A window pops up that shows you all of the commandline switches available. An extensive list of examples is also provided. This is only for Win 200x/XP, it does not work on Windows NT. Windows NT probably has some other tools in the respective Resource Kit. Here is a suggestion about what a client logon script might contain, with a short explanation of what the lines actually do (it works if 200x/XP Windows clients access printers via Samba, and works for Windows-based print servers too):

rundll32 printui.dll,PrintUIEntry /dn /n "\\cupsserver\infotec2105-IPDS" /q
rundll32 printui.dll,PrintUIEntry /in /n "\\cupsserver\infotec2105-PS"
rundll32 printui.dll,PrintUIEntry /y /n "\\cupsserver\infotec2105-PS"

Here is a list of the used commandline parameters:

/dn

deletes a network printer

/q

quiet modus

/n

names a printer

/in

adds a network printer connection

/y

sets printer as default printer

  • Line 1 deletes a possibly existing previous network printer infotec2105-IPDS (which had used native Windows drivers with LPRng that were removed from the server that was converted to CUPS). The /q at the end eliminates Confirm or error dialog boxes from popping up. They should not be presented to the user logging on.

  • Line 2 adds the new printer infotec2105-PS (which actually is the same physical device but is now run by the new CUPS printing system and associated with the CUPS/Adobe PS drivers). The printer and its driver must have been added to Samba prior to the user logging in (e.g., by a procedure as discussed earlier in this chapter, or by running cupsaddsmb). The driver is now auto-downloaded to the client PC where the user is about to log in.

  • Line 3 sets the default printer to this new network printer (there might be several other printers installed with this same method and some may be local as well, so we decide for a default printer). The default printer selection may, of course, be different for different users.

The second line only works if the printer infotec2105-PS has an already working print queue on the cupsserver, and if the printer drivers have been successfully uploaded (via the APW, smbclient/rpcclient, or cupsaddsmb) into the [print$] driver repository of Samba. Some Samba versions prior to version 3.0 required a re-start of smbd after the printer install and the driver upload, otherwise the script (or any other client driver download) would fail.

Since there no easy way to test for the existence of an installed network printer from the logon script, do not bother checking, just allow the deinstallation/reinstallation to occur every time a user logs in; it's really quick anyway (1 to 2 seconds).

The additional benefits for this are:

  • It puts in place any printer default setup changes automatically at every user logon.

  • It allows for “roaming” users' login into the domain from different workstations.

Since network printers are installed per user, this much simplifies the process of keeping the installation up-to-date. The few extra seconds at logon time will not really be noticeable. Printers can be centrally added, changed and deleted at will on the server with no user intervention required from the clients (you just need to keep the logon scripts up-to-date).

The addprinter Command

The addprinter command can be configured to be a shell script or program executed by Samba. It is triggered by running the APW from a client against the Samba print server. The APW asks the user to fill in several fields (such as printer name, driver to be used, comment, port monitor, and so on). These parameters are passed on to Samba by the APW. If the addprinter command is designed in a way that it can create a new printer (through writing correct printcap entries on legacy systems, or execute the lpadmin command on more modern systems) and create the associated share in, then the APW will in effect really create a new printer on Samba and the UNIX print subsystem!

Migration of Classical Printing to Samba

The basic NT-style printer driver management has not changed considerably in 3.0 over the 2.2.x releases (apart from many small improvements). Here migration should be quite easy, especially if you followed previous advice to stop using deprecated parameters in your setup. For migrations from an existing 2.0.x setup, or if you continued Windows 9x/Me-style printing in your Samba 2.2 installations, it is more of an effort. Please read the appropriate release notes and the HOWTO Collection for Samba-2.2.x. You can follow several paths. Here are possible scenarios for migration:

  • You need to study and apply the new Windows NT printer and driver support. Previously used parameters printer driver file, printer driver and printer driver location are no longer supported.

  • If you want to take advantage of Windows NT printer driver support, you also need to migrate the Windows 9x/Me drivers to the new setup.

  • An existing printers.def file (the one specified in the now removed parameter printer driver file) will no longer work with Samba-3. In 3.0, smbd attempts to locate a Windows 9x/Me driver files for the printer in [print$] and additional settings in the TDB and only there; if it fails, it will not (as 2.2.x used to do) drop down to using a printers.def (and all associated parameters). The make_printerdef tool is removed and there is no backward compatibility for this.

  • You need to install a Windows 9x/Me driver into the [print$] share for a printer on your Samba host. The driver files will be stored in the “WIN40/0” subdirectory of [print$], and some other settings and information go into the printing-related TDBs.

  • If you want to migrate an existing printers.def file into the new setup, the only current solution is to use the Windows NT APW to install the NT drivers and the 9x/Me drivers. This can be scripted using smbclient and rpcclient. See the Imprints installation client at:

    http://imprints.sourceforge.net/

    for an example. See also the discussion of rpcclient usage in the “CUPS Printing” section.

Publishing Printer Information in Active Directory or LDAP

This will be addressed in a later update of this document. If you wish to volunteer your services to help document this, please contact John H Terpstra.

Common Errors

I Give My Root Password but I Do Not Get Access

Do not confuse the root password which is valid for the UNIX system (and in most cases stored in the form of a one-way hash in a file named /etc/shadow), with the password used to authenticate against Samba. Samba does not know the UNIX password. Root access to Samba resources requires that a Samba account for root must first be created. This is done with the smbpasswd command as follows:

root#  smbpasswd -a root
New SMB password: secret
Retype new SMB password: secret

My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

Do not use the existing UNIX print system spool directory for the Samba spool directory. It may seem convenient and a savings of space, but it only leads to problems. The two must be separate.

Chapter 19. CUPS Printing Support

Kurt Pfeifle

Danka Deutschland GmbH

Ciprian Vizitiu

drawings

Jelmer R. Vernooij

drawings
The Samba Team

(3 June 2003)

Table of Contents

Introduction
Features and Benefits
Overview
Basic CUPS Support Configuration
Linking smbd with libcups.so
Simple smb.conf Settings for CUPS
More Complex CUPS smb.conf Settings
Advanced Configuration
Central Spooling vs. Peer-to-Peer Printing
Raw Print Serving Vendor Drivers on Windows Clients
Installation of Windows Client Drivers
Explicitly Enable raw Printing for application/octet-stream
Driver Upload Methods
Advanced Intelligent Printing with PostScript Driver Download
GDI on Windows -- PostScript on UNIX
Windows Drivers, GDI and EMF
UNIX Printfile Conversion and GUI Basics
PostScript and Ghostscript
Ghostscript the Software RIP for Non-PostScript Printers
PostScript Printer Description (PPD) Specification
Using Windows-Formatted Vendor PPDs
CUPS Also Uses PPDs for Non-PostScript Printers
The CUPS Filtering Architecture
MIME Types and CUPS Filters
MIME Type Conversion Rules
Filtering Overview
Prefilters
pstops
pstoraster
imagetops and imagetoraster
rasterto [printers specific]
CUPS Backends
The Role of cupsomatic/foomatic
The Complete Picture
mime.convs
Raw Printing
application/octet-stream Printing
PostScript Printer Descriptions (PPDs) for Non-PS Printers
cupsomatic/foomatic-rip Versus native CUPS Printing
Examples for Filtering Chains
Sources of CUPS Drivers/PPDs
Printing with Interface Scripts
Network Printing (Purely Windows)
From Windows Clients to an NT Print Server
Driver Execution on the Client
Driver Execution on the Server
Network Printing (Windows Clients UNIX/Samba Print Servers)
From Windows Clients to a CUPS/Samba Print Server
Samba Receiving Jobfiles and Passing Them to CUPS
Network PostScript RIP
PPDs for Non-PS Printers on UNIX
PPDs for Non-PS Printers on Windows
Windows Terminal Servers (WTS) as CUPS Clients
Printer Drivers Running in Kernel Mode Cause Many Problems
Workarounds Impose Heavy Limitations
CUPS: A Magical Stone?
PostScript Drivers with No Major Problems Even in Kernel Mode
Configuring CUPS for Driver Download
cupsaddsmb: The Unknown Utility
Prepare Your smb.conf for cupsaddsmb
CUPS PostScript Driver for Windows NT/200x/XP
Recognizing Different Driver Files
Acquiring the Adobe Driver Files
ESP Print Pro PostScript Driver for Windows NT/200x/XP
Caveats to be Considered
Windows CUPS PostScript Driver Versus Adobe Driver
Run cupsaddsmb (Quiet Mode)
Run cupsaddsmb with Verbose Output
Understanding cupsaddsmb
How to Recognize If cupsaddsmb Completed Successfully
cupsaddsmb with a Samba PDC
cupsaddsmb Flowchart
Installing the PostScript Driver on a Client
Avoiding Critical PostScript Driver Settings on the Client
Installing PostScript Driver Files Manually Using rpcclient
A Check of the rpcclient man Page
Understanding the rpcclient man Page
Producing an Example by Querying a Windows Box
Requirements for adddriver and setdriver to Succeed
Manual Driver Installation in 15 Steps
Troubleshooting Revisited
The Printing *.tdb Files
Trivial Database Files
Binary Format
Losing *.tdb Files
Using tdbbackup
CUPS Print Drivers from Linuxprinting.org
foomatic-rip and Foomatic Explained
foomatic-rip and Foomatic-PPD Download and Installation
Page Accounting with CUPS
Setting Up Quotas
Correct and Incorrect Accounting
Adobe and CUPS PostScript Drivers for Windows Clients
The page_log File Syntax
Possible Shortcomings
Future Developments
Additional Material
Auto-Deletion or Preservation of CUPS Spool Files
CUPS Configuration Settings Explained
Pre-Conditions
Manual Configuration
Printing from CUPS to Windows Attached Printers
More CUPS-Filtering Chains
Common Errors
Windows 9x/ME Client Can't Install Driver
cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
cupsaddsmb Errors
Client Can't Connect to Samba Printer
New Account Reconnection from Windows 200x/XP Troubles
Avoid Being Connected to the Samba Server as the Wrong User
Upgrading to CUPS Drivers from Adobe Drivers
Can't Use cupsaddsmb on Samba Server Which Is a PDC
Deleted Windows 200x Printer Driver Is Still Shown
Windows 200x/XP "Local Security Policies"
Administrator Cannot Install Printers for All Local Users
Print Change Notify Functions on NT-clients
WinXP-SP1
Print Options for All Users Can't Be Set on Windows 200x/XP
Most Common Blunders in Driver Settings on Windows Clients
cupsaddsmb Does Not Work with Newly Installed Printer
Permissions on /var/spool/samba/ Get Reset After Each Reboot
Print Queue Called lp Mis-handles Print Jobs
Location of Adobe PostScript Driver Files for cupsaddsmb
Overview of the CUPS Printing Processes

Introduction

Features and Benefits

The Common UNIX Print System (CUPS) has become quite popular. All major Linux distributions now ship it as their default printing system. To many, it is still a mystical tool. Mostly, it just works. People tend to regard it as a “black box” that they do not want to look into as long as it works. But once there is a little problem, they are in trouble to find out where to start debugging it. Refer to the chapter “Classical Printing” that contains a lot of information that is relevant for CUPS.

CUPS sports quite a few unique and powerful features. While their basic functions may be grasped quite easily, they are also new. Because they are different from other, more traditional printing systems, it is best not to try and apply any prior knowledge about printing to this new system. Rather, try to understand CUPS from the beginning. This documentation will lead you to a complete understanding of CUPS. Let's start with the most basic things first.

Overview

CUPS is more than just a print spooling system. It is a complete printer management system that complies with the new Internet Printing Protocol (IPP). IPP is an industry and Internet Engineering Task Force (IETF) standard for network printing. Many of its functions can be managed remotely (or locally) via a Web browser (giving you a platform-independent access to the CUPS print server). Additionally, it has the traditional command line and several more modern GUI interfaces (GUI interfaces developed by third parties, like KDE's overwhelming KDEPrint).

CUPS allows creation of “raw” printers (i.e., no print file format translation) as well as “smart” printers (i.e., CUPS does file format conversion as required for the printer). In many ways this gives CUPS similar capabilities to the MS Windows print monitoring system. Of course, if you are a CUPS advocate, you would argue that CUPS is better! In any case, let us now move on to explore how one may configure CUPS for interfacing with MS Windows print clients via Samba.

Basic CUPS Support Configuration

Printing with CUPS in the most basic smb.conf setup in Samba-3.0 (as was true for 2.2.x) only needs two settings: printing = cups and printcap = cups. CUPS does not need a printcap file. However, the cupsd.conf configuration file knows of two related directives that control how such a file will be automatically created and maintained by CUPS for the convenience of third-party applications (example: Printcap /etc/printcap and PrintcapFormat BSD). Legacy programs often require the existence of a printcap file containing printer names or they will refuse to print. Make sure CUPS is set to generate and maintain a printcap file. For details, see man cupsd.conf and other CUPS-related documentation, like the wealth of documents on your CUPS server itself: http://localhost:631/documentation.html.

Linking smbd with libcups.so

Samba has a special relationship to CUPS. Samba can be compiled with CUPS library support. Most recent installations have this support enabled. Per default, CUPS linking is compiled into smbd and other Samba binaries. Of course, you can use CUPS even if Samba is not linked against libcups.so but there are some differences in required or supported configuration.

When Samba is compiled against libcups, printcap = cups uses the CUPS API to list printers, submit jobs, query queues, and so on. Otherwise it maps to the System V commands with an additional -oraw option for printing. On a Linux system, you can use the ldd utility to find out details (ldd may not be present on other OS platforms, or its function may be embodied by a different command):

root# ldd `which smbd`
libssl.so.0.9.6 => /usr/lib/libssl.so.0.9.6 (0x4002d000)
libcrypto.so.0.9.6 => /usr/lib/libcrypto.so.0.9.6 (0x4005a000)
libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000)
[....]

The line libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000) shows there is CUPS support compiled into this version of Samba. If this is the case, and printing = cups is set, then any otherwise manually set print command in smb.conf is ignored. This is an important point to remember!

Tip

Should it be necessary, for any reason, to set your own print commands, you can do this by setting printing = sysv. However, you will loose all the benefits of tight CUPS/Samba integration. When you do this you must manually configure the printing system commands (most important: print command; other commands are lppause command, lpresume command, lpq command, lprm command, queuepause command and queue resume command).

Simple smb.conf Settings for CUPS

To summarize, shows simplest printing-related setup for smb.conf to enable basic CUPS support:

Example 19.1. Simplest printing-related smb.conf

[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = root, @ntadmins

This is all you need for basic printing setup for CUPS. It will print all graphic, text, PDF, and PostScript files submitted from Windows clients. However, most of your Windows users would not know how to send these kinds of files to print without opening a GUI application. Windows clients tend to have local printer drivers installed, and the GUI application's print buttons start a printer driver. Your users also rarely send files from the command line. Unlike UNIX clients, they hardly submit graphic, text or PDF formatted files directly to the spooler. They nearly exclusively print from GUI applications with a “printer driver” hooked in between the application's native format and the print-data-stream. If the backend printer is not a PostScript device, the print data stream is “binary,” sensible only for the target printer. Read on to learn which problem this may cause and how to avoid it.

More Complex CUPS smb.conf Settings

is a slightly more complex printing-related setup for smb.conf. It enables general CUPS printing support for all printers, but defines one printer share, which is set up differently.

Example 19.2. Overriding global CUPS settings for one printer

[global]
printing = cups
printcap name = cups
load printers = yes
[printers]
comment = All Printers
path = /var/spool/samba
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = root, @ntadmins
[special_printer]
comment = A special printer with his own settings
path = /var/spool/samba-special
printing = sysv
printcap = lpstat
print command = echo "NEW: `date`: printfile %f" >> /tmp/smbprn.log ; \
echo " `date`: p-%p s-%s f-%f" >> /tmp/smbprn.log ; \
echo " `date`: j-%j J-%J z-%z c-%c" >> /tmp/smbprn.log : rm %f
public = no
guest ok = no
writeable = no
printable = yes
printer admin = kurt
hosts deny = 0.0.0.0
hosts allow = turbo_xp, 10.160.50.23, 10.160.51.60

This special share is only there for testing purposes. It does not write the print job to a file. It just logs the job parameters known to Samba into the /tmp/smbprn.log file and deletes the jobfile. Moreover, the printer admin of this share is “kurt” (not the “@ntadmins” group), guest access is not allowed, the share isn't published to the Network Neighborhood (so you need to know it is there), and it only allows access from only three hosts. To prevent CUPS kicking in and taking over the print jobs for that share, we need to set printing = sysv and printcap = lpstat.

Advanced Configuration

Before we delve into all the configuration options, let us clarify a few points. Network printing needs to be organized and setup correctly. This frequently doesn't happen. Legacy systems or small business LAN environments often lack design and good housekeeping.

Central Spooling vs. “Peer-to-Peer” Printing

Many small office or home networks, as well as badly organized larger environments, allow each client a direct access to available network printers. This is generally a bad idea. It often blocks one client's access to the printer when another client's job is printing. It might freeze the first client's application while it is waiting to get rid of the job. Also, there are frequent complaints about various jobs being printed with their pages mixed with each other. A better concept is the usage of a print server: it routes all jobs through one central system, which responds immediately, takes jobs from multiple concurrent clients at the same time, and in turn transfers them to the printer(s) in the correct order.

Raw Print Serving Vendor Drivers on Windows Clients

Most traditionally configured UNIX print servers acting on behalf of Samba's Windows clients represented a really simple setup. Their only task was to manage the “raw” spooling of all jobs handed to them by Samba. This approach meant that the Windows clients were expected to prepare the print job file that its ready to be sent to the printing device. Here is a native (vendor-supplied) Windows printer driver for the target device needed to be installed on each and every client.

It is possible to configure CUPS, Samba and your Windows clients in the same traditional and simple way. When CUPS printers are configured for RAW print-through mode operation, it is the responsibility of the Samba client to fully render the print job (file). The file must be sent in a format that is suitable for direct delivery to the printer. Clients need to run the vendor-provided drivers to do this. In this case, CUPS will not do any print file format conversion work.

Installation of Windows Client Drivers

The printer drivers on the Windows clients may be installed in two functionally different ways:

  • Manually install the drivers locally on each client, one by one; this yields the old LanMan style printing and uses a \\sambaserver\printershare type of connection.

  • Deposit and prepare the drivers (for later download) on the print server (Samba); this enables the clients to use “Point'n'Print” to get drivers semi-automatically installed the first time they access the printer; with this method NT/200x/XP clients use the SPOOLSS/MS-RPC type printing calls.

The second method is recommended for use over the first.

Explicitly Enable “raw” Printing for application/octet-stream

If you use the first option (drivers are installed on the client side), there is one setting to take care of: CUPS needs to be told that it should allow “raw” printing of deliberate (binary) file formats. The CUPS files that need to be correctly set for RAW mode printers to work are:

  • /etc/cups/mime.types

  • /etc/cups/mime.convs

Both contain entries (at the end of the respective files) which must be uncommented to allow RAW mode operation. In /etc/cups/mime.types, make sure this line is present:

	 application/octet-stream
	

In /etc/cups/mime.convs, have this line:

		application/octet-stream   application/vnd.cups-raw   0   - 
	

If these two files are not set up correctly for raw Windows client printing, you may encounter the dreaded Unable to convert file 0 in your CUPS error_log file.

Note

Editing the mime.convs and the mime.types file does not enforceraw” printing, it only allows it.

Background.  CUPS being a more security-aware printing system than traditional ones does not by default allow a user to send deliberate (possibly binary) data to printing devices. This could be easily abused to launch a “Denial of Service” attack on your printer(s), causing at least the loss of a lot of paper and ink. “Unknown” data are tagged by CUPS as MIME type: application/octet-stream and not allowed to go to the printer. By default, you can only send other (known) MIME types “raw”. Sending data “raw” means that CUPS does not try to convert them and passes them to the printer untouched (see the next chapter for even more background explanations).

This is all you need to know to get the CUPS/Samba combo printing “raw” files prepared by Windows clients, which have vendor drivers locally installed. If you are not interested in background information about more advanced CUPS/Samba printing, simply skip the remaining sections of this chapter.

Driver Upload Methods

This section describes three familiar methods, plus one new one, by which printer drivers may be uploaded.

If you want to use the MS-RPC type printing, you must upload the drivers onto the Samba server first ([print$] share). For a discussion on how to deposit printer drivers on the Samba host (so the Windows clients can download and use them via “Point'n'Print”), please refer to the previous chapter of this HOWTO Collection. There you will find a description or reference to three methods of preparing the client drivers on the Samba server:

  • The GUI, “Add Printer Wizardupload-from-a-Windows-client method.

  • The command line, “smbclient/rpcclient” upload-from-a-UNIX-workstation method.

  • The Imprints Toolset method.

These three methods apply to CUPS all the same. A new and more convenient way to load the Windows drivers into Samba is provided if you use CUPS:

  • the cupsaddsmb utility.

cupsaddsmb is discussed in much detail further below. But we first explore the CUPS filtering system and compare the Windows and UNIX printing architectures.

Advanced Intelligent Printing with PostScript Driver Download

We now know how to set up a “dump” printserver, that is, a server which is spooling printjobs “raw”, leaving the print data untouched.

Possibly you need to setup CUPS in a smarter way. The reasons could be manifold:

  • Maybe your boss wants to get monthly statistics: Which printer did how many pages? What was the average data size of a job? What was the average print run per day? What are the typical hourly peaks in printing? Which department prints how much?

  • Maybe you are asked to setup a print quota system: Users should not be able to print more jobs, once they have surpassed a given limit per period.

  • Maybe your previous network printing setup is a mess and must be re-organized from a clean beginning.

  • Maybe you have experiencing too many “blue screens” originating from poorly debugged printer drivers running in NT “kernel mode”?

These goals cannot be achieved by a raw print server. To build a server meeting these requirements, you'll first need to learn about how CUPS works and how you can enable its features.

What follows is the comparison of some fundamental concepts for Windows and UNIX printing; then follows a description of the CUPS filtering system, how it works and how you can tweak it.

GDI on Windows -- PostScript on UNIX

Network printing is one of the most complicated and error-prone day-to-day tasks any user or administrator may encounter. This is true for all OS platforms. And there are reasons for this.

You can't expect most file formats to just throw them toward printers and they get printed. There needs to be a file format conversion in between. The problem is that there is no common standard for print file formats across all manufacturers and printer types. While PostScript (trademark held by Adobe) and, to an extent, PCL (trademark held by HP) have developed into semi-official “standards” by being the most widely used PDLs Page Description Languages (PDLs), there are still many manufacturers who “roll their own” (their reasons may be unacceptable license fees for using printer-embedded PostScript interpreters, and so on).

Windows Drivers, GDI and EMF

In Windows OS, the format conversion job is done by the printer drivers. On MS Windows OS platforms all application programmers have at their disposal a built-in API, the Graphical Device Interface (GDI), as part and parcel of the OS itself to base themselves on. This GDI core is used as one common unified ground for all Windows programs to draw pictures, fonts and documents on screen as well as on paper (print). Therefore, printer driver developers can standardize on a well-defined GDI output for their own driver input. Achieving WYSIWYG (“What You See Is What You Get”) is relatively easy, because the on-screen graphic primitives, as well as the on-paper drawn objects, come from one common source. This source, the GDI, often produces a file format called Enhanced MetaFile (EMF). The EMF is processed by the printer driver and converted to the printer-specific file format.

Note

To the GDI foundation in MS Windows, Apple has chosen to put paper and screen output on a common foundation for their (BSD-UNIX-based, did you know?) Mac OS X and Darwin Operating Systems. Their Core Graphic Engine uses a PDF derivative for all display work.

Figure 19.1. Windows printing to a local printer.

Windows printing to a local printer.

UNIX Printfile Conversion and GUI Basics

In UNIX and Linux, there is no comparable layer built into the OS kernel(s) or the X (screen display) server. Every application is responsible for itself to create its print output. Fortunately, most use PostScript and that at least gives some common ground. Unfortunately, there are many different levels of quality for this PostScript. And worse, there is a huge difference (and no common root) in the way the same document is displayed on screen and how it is presented on paper. WYSIWYG is more difficult to achieve. This goes back to the time, decades ago, when the predecessors of X.org, designing the UNIX foundations and protocols for Graphical User Interfaces, refused to take responsibility for “paper output” also, as some had demanded at the time, and restricted itself to “on-screen only.” (For some years now, the “Xprint” project has been under development, attempting to build printing support into the X framework, including a PostScript and a PCL driver, but it is not yet ready for prime time.) You can see this unfavorable inheritance up to the present day by looking into the various “font” directories on your system; there are separate ones for fonts used for X display and fonts to be used on paper.

Background.  The PostScript programming language is an “invention” by Adobe Inc., but its specifications have been published to the full. Its strength lies in its powerful abilities to describe graphical objects (fonts, shapes, patterns, lines, curves, and dots), their attributes (color, linewidth) and the way to manipulate (scale, distort, rotate, shift) them. Because of its open specification, anybody with the skill can start writing his own implementation of a PostScript interpreter and use it to display PostScript files on screen or on paper. Most graphical output devices are based on the concept of “raster images” or “pixels” (one notable exception is pen plotters). Of course, you can look at a PostScript file in its textual form and you will be reading its PostScript code, the language instructions which need to be interpreted by a rasterizer. Rasterizers produce pixel images, which may be displayed on screen by a viewer program or on paper by a printer.

PostScript and Ghostscript

So, UNIX is lacking a common ground for printing on paper and displaying on screen. Despite this unfavorable legacy for UNIX, basic printing is fairly easy if you have PostScript printers at your disposal. The reason is these devices have a built-in PostScript language “interpreter,” also called a Raster Image Processor (RIP) (which makes them more expensive than other types of printers); throw PostScript toward them, and they will spit out your printed pages. Their RIP is doing all the hard work of converting the PostScript drawing commands into a bitmap picture as you see it on paper, in a resolution as done by your printer. This is no different to PostScript printing a file from a Windows origin.

Note

Traditional UNIX programs and printing systems while using PostScript are largely not PPD-aware. PPDs are “PostScript Printer Description” files. They enable you to specify and control all options a printer supports: duplexing, stapling and punching. Therefore, UNIX users for a long time couldn't choose many of the supported device and job options, unlike Windows or Apple users. But now there is CUPS.

Figure 19.2. Printing to a PostScript printer.

Printing to a PostScript printer.

However, there are other types of printers out there. These do not know how to print PostScript. They use their own Page Description Language (PDL, often proprietary). To print to them is much more demanding. Since your UNIX applications mostly produce PostScript, and since these devices do not understand PostScript, you need to convert the printfiles to a format suitable for your printer on the host before you can send it away.

Ghostscript the Software RIP for Non-PostScript Printers

Here is where Ghostscript kicks in. Ghostscript is the traditional (and quite powerful) PostScript interpreter used on UNIX platforms. It is a RIP in software, capable of doing a lot of file format conversions for a very broad spectrum of hardware devices as well as software file formats. Ghostscript technology and drivers are what enable PostScript printing to non-PostScript hardware.

Figure 19.3. Ghostscript as a RIP for non-postscript printers.

Ghostscript as a RIP for non-postscript printers.

Tip

Use the “gs -h” command to check for all built-in “devices” of your Ghostscript version. If you specify a parameter of -sDEVICE=png256 on your Ghostscript command line, you are asking Ghostscript to convert the input into a PNG file. Naming a “device” on the command line is the most important single parameter to tell Ghostscript exactly how it should render the input. New Ghostscript versions are released at fairly regular intervals, now by artofcode LLC. They are initially put under the “AFPL” license, but re-released under the GNU GPL as soon as the next AFPL version appears. GNU Ghostscript is probably the version installed on most Samba systems. But it has some deficiencies. Therefore, ESP Ghostscript was developed as an enhancement over GNU Ghostscript, with lots of bug-fixes, additional devices and improvements. It is jointly maintained by developers from CUPS, Gimp-Print, MandrakeSoft, SuSE, RedHat, and Debian. It includes the “cups” device (essential to print to non-PS printers from CUPS).

PostScript Printer Description (PPD) Specification

While PostScript in essence is a Page Description Language (PDL) to represent the page layout in a device-independent way, real-world print jobs are always ending up being output on hardware with device-specific features. To take care of all the differences in hardware and to allow for innovations, Adobe has specified a syntax and file format for PostScript Printer Description (PPD) files. Every PostScript printer ships with one of these files.

PPDs contain all the information about general and special features of the given printer model: Which different resolutions can it handle? Does it have a Duplexing Unit? How many paper trays are there? What media types and sizes does it take? For each item, it also names the special command string to be sent to the printer (mostly inside the PostScript file) in order to enable it.

Information from these PPDs is meant to be taken into account by the printer drivers. Therefore, installed as part of the Windows PostScript driver for a given printer is the printer's PPD. Where it makes sense, the PPD features are presented in the drivers' UI dialogs to display to the user a choice of print options. In the end, the user selections are somehow written (in the form of special PostScript, PJL, JCL or vendor-dependent commands) into the PostScript file created by the driver.

Warning

A PostScript file that was created to contain device-specific commands for achieving a certain print job output (e.g., duplexed, stapled and punched) on a specific target machine, may not print as expected, or may not be printable at all on other models; it also may not be fit for further processing by software (e.g., by a PDF distilling program).

Using Windows-Formatted Vendor PPDs

CUPS can handle all spec-compliant PPDs as supplied by the manufacturers for their PostScript models. Even if a vendor might not have mentioned our favorite OS in his manuals and brochures, you can safely trust this: If you get the Windows NT version of the PPD, you can use it unchanged in CUPS and thus access the full power of your printer just like a Windows NT user could!

Tip

To check the spec compliance of any PPD online, go to http://www.cups.org/testppd.php and upload your PPD. You will see the results displayed immediately. CUPS in all versions after 1.1.19 has a much more strict internal PPD parsing and checking code enabled; in case of printing trouble, this online resource should be one of your first pitstops.

Warning

For real PostScript printers, do not use the Foomatic or cupsomatic PPDs from Linuxprinting.org. With these devices, the original vendor-provided PPDs are always the first choice!

Tip

If you are looking for an original vendor-provided PPD of a specific device, and you know that an NT4 box (or any other Windows box) on your LAN has the PostScript driver installed, just use smbclient //NT4-box/print\$ -U username to access the Windows directory where all printer driver files are stored. First look in the W32X86/2 subdir for the PPD you are seeking.

CUPS Also Uses PPDs for Non-PostScript Printers

CUPS also uses specially crafted PPDs to handle non-PostScript printers. These PPDs are usually not available from the vendors (and no, you can't just take the PPD of a PostScript printer with the same model name and hope it works for the non-PostScript version too). To understand how these PPDs work for non-PS printers, we first need to dive deeply into the CUPS filtering and file format conversion architecture. Stay tuned.

The CUPS Filtering Architecture

The core of the CUPS filtering system is based on Ghostscript. In addition to Ghostscript, CUPS uses some other filters of its own. You (or your OS vendor) may have plugged in even more filters. CUPS handles all data file formats under the label of various MIME types. Every incoming printfile is subjected to an initial auto-typing. The auto-typing determines its given MIME type. A given MIME type implies zero or more possible filtering chains relevant to the selected target printer. This section discusses how MIME types recognition and conversion rules interact. They are used by CUPS to automatically setup a working filtering chain for any given input data format.

If CUPS rasterizes a PostScript file natively to a bitmap, this is done in two stages:

  • The first stage uses a Ghostscript device named “cups” (this is since version 1.1.15) and produces a generic raster format called “CUPS raster”.

  • The second stage uses a “raster driver” that converts the generic CUPS raster to a device-specific raster.

Make sure your Ghostscript version has the “cups” device compiled in (check with gs -h | grep cups). Otherwise you may encounter the dreaded Unable to convert file 0 in your CUPS error_log file. To have “cups” as a device in your Ghostscript, you either need to patch GNU Ghostscript and re-compile, or use ESP Ghostscript. The superior alternative is ESP Ghostscript. It supports not just CUPS, but 300 other devices too (while GNU Ghostscript supports only about 180). Because of this broad output device support, ESP Ghostscript is the first choice for non-CUPS spoolers, too. It is now recommended by Linuxprinting.org for all spoolers.

CUPS printers may be setup to use external rendering paths. One of the most common is provided by the Foomatic/cupsomatic concept from Linuxprinting.org. This uses the classical Ghostscript approach, doing everything in one step. It does not use the “cups” device, but one of the many others. However, even for Foomatic/cupsomatic usage, best results and broadest printer model support is provided by ESP Ghostscript (more about cupsomatic/Foomatic, particularly the new version called now foomatic-rip, follows below).

MIME Types and CUPS Filters

CUPS reads the file /etc/cups/mime.types (and all other files carrying a *.types suffix in the same directory) upon startup. These files contain the MIME type recognition rules that are applied when CUPS runs its auto-typing routines. The rule syntax is explained in the man page for mime.types and in the comments section of the mime.types file itself. A simple rule reads like this:

 application/pdf         pdf string(0,%PDF)

This means if a filename has either a .pdf suffix or if the magic string %PDF is right at the beginning of the file itself (offset 0 from the start), then it is a PDF file (application/pdf). Another rule is this:

 application/postscript  ai eps ps string(0,%!) string(0,<04>%!)

If the filename has one of the suffixes .ai, .eps, .ps or if the file itself starts with one of the strings %! or <04>%!, it is a generic PostScript file (application/postscript).

Warning

Don't confuse the other mime.types files your system might be using with the one in the /etc/cups/ directory.

Note

There is an important difference between two similar MIME types in CUPS: one is application/postscript, the other is application/vnd.cups-postscript. While application/postscript is meant to be device independent (job options for the file are still outside the PS file content, embedded in command line or environment variables by CUPS), application/vnd.cups-postscript may have the job options inserted into the PostScript data itself (where applicable). The transformation of the generic PostScript (application/postscript) to the device-specific version (application/vnd.cups-postscript) is the responsibility of the CUPS pstops filter. pstops uses information contained in the PPD to do the transformation.

CUPS can handle ASCII text, HP-GL, PDF, PostScript, DVI, and many image formats (GIF. PNG, TIFF, JPEG, Photo-CD, SUN-Raster, PNM, PBM, SGI-RGB, and more) and their associated MIME types with its filters.

MIME Type Conversion Rules

CUPS reads the file /etc/cups/mime.convs (and all other files named with a *.convs suffix in the same directory) upon startup. These files contain lines naming an input MIME type, an output MIME type, a format conversion filter that can produce the output from the input type and virtual costs associated with this conversion. One example line reads like this:

 application/pdf         application/postscript   33   pdftops

This means that the pdftops filter will take application/pdf as input and produce application/postscript as output; the virtual cost of this operation is 33 CUPS-$. The next filter is more expensive, costing 66 CUPS-$:

 application/vnd.hp-HPGL application/postscript   66   hpgltops

This is the hpgltops, which processes HP-GL plotter files to PostScript.

 application/octet-stream

Here are two more examples:

 application/x-shell     application/postscript   33    texttops
 text/plain              application/postscript   33    texttops

The last two examples name the texttops filter to work on text/plain as well as on application/x-shell. (Hint: This differentiation is needed for the syntax highlighting feature of texttops).

Filtering Overview

There are many more combinations named in mime.convs. However, you are not limited to use the ones pre-defined there. You can plug in any filter you like into the CUPS framework. It must meet, or must be made to meet, some minimal requirements. If you find (or write) a cool conversion filter of some kind, make sure it complies to what CUPS needs and put in the right lines in mime.types and mime.convs, then it will work seamlessly inside CUPS.

Filter requirements

The mentioned “CUPS requirements” for filters are simple. Take filenames or stdin as input and write to stdout. They should take these 5 or 6 arguments: printer job user title copies options [filename]

Printer

The name of the printer queue (normally this is the name of the filter being run).

job

The numeric job ID for the job being printed.

user

The string from the originating-user-name attribute.

title

The string from the job-name attribute.

copies

The numeric value from the number-copies attribute.

options

The job options.

filename

(Optionally) The print request file (if missing, filters expected data fed through stdin). In most cases, it is easy to write a simple wrapper script around existing filters to make them work with CUPS.

Prefilters

As previously stated, PostScript is the central file format to any UNIX-based printing system. From PostScript, CUPS generates raster data to feed non-PostScript printers.

But what happens if you send one of the supported non-PS formats to print? Then CUPS runs “pre-filters” on these input formats to generate PostScript first. There are pre-filters to create PS from ASCII text, PDF, DVI, or HP-GL. The outcome of these filters is always of MIME type application/postscript (meaning that any device-specific print options are not yet embedded into the PostScript by CUPS, and that the next filter to be called is pstops). Another pre-filter is running on all supported image formats, the imagetops filter. Its outcome is always of MIME type application/vnd.cups-postscript (not application/postscript), meaning it has the print options already embedded into the file.

Figure 19.4. Pre-filtering in CUPS to form PostScript.

Pre-filtering in CUPS to form PostScript.

pstops

pstops is the filter to convert application/postscript to application/vnd.cups-postscript. It was said above that this filter inserts all device-specific print options (commands to the printer to ask for the duplexing of output, or stapling and punching it, and so on) into the PostScript file.

Figure 19.5. Adding device-specific print options.

Adding device-specific print options.

This is not all. Other tasks performed by it are:

  • Selecting the range of pages to be printed (if you choose to print only pages “3, 6, 8-11, 16, 19-21”, or only the odd numbered ones).

  • Putting 2 or more logical pages on one sheet of paper (the so-called “number-up” function).

  • Counting the pages of the job to insert the accounting information into the /var/log/cups/page_log.

pstoraster

pstoraster is at the core of the CUPS filtering system. It is responsible for the first stage of the rasterization process. Its input is of MIME type application/vnd.cups-postscript; its output is application/vnd.cups-raster. This output format is not yet meant to be printable. Its aim is to serve as a general purpose input format for more specialized raster drivers that are able to generate device-specific printer data.

Figure 19.6. PostScript to intermediate raster format.

PostScript to intermediate raster format.

CUPS raster is a generic raster format with powerful features. It is able to include per-page information, color profiles, and more, to be used by the following downstream raster drivers. Its MIME type is registered with IANA and its specification is, of course, completely open. It is designed to make it quite easy and inexpensive for manufacturers to develop Linux and UNIX raster drivers for their printer models, should they choose to do so. CUPS always takes care for the first stage of rasterization so these vendors do not need to care about Ghostscript complications (in fact, there is currently more than one vendor financing the development of CUPS raster drivers).

Figure 19.7. CUPS-raster production using Ghostscript.

CUPS-raster production using Ghostscript.

CUPS versions before version 1.1.15 were shipping a binary (or source code) standalone filter, named pstoraster. pstoraster was derived from GNU Ghostscript 5.50, and could be installed besides and in addition to any GNU or AFPL Ghostscript package without conflicting.

>From version 1.1.15, this has changed. The functions for this have been integrated back into Ghostscript (now based on GNU Ghostscript version 7.05). The pstoraster filter is now a simple shell script calling gs with the -sDEVICE=cups parameter. If your Ghostscript does not show a success on asking for gs -h |grep cups, you might not be able to print. Update your Ghostscript.

imagetops and imagetoraster

In the section about pre-filters, we mentioned the pre-filter that generates PostScript from image formats. The imagetoraster filter is used to convert directly from image to raster, without the intermediate PostScript stage. It is used more often than the above mentioned pre-filters. A summarizing flowchart of image file filtering is shown in .

Figure 19.8. Image format to CUPS-raster format conversion.

Image format to CUPS-raster format conversion.

rasterto [printers specific]

CUPS ships with quite different raster drivers processing CUPS raster. On my system I find in /usr/lib/cups/filter/ these: rastertoalps, rastertobj, rastertoepson, rastertoescp, rastertopcl, rastertoturboprint, rastertoapdk, rastertodymo, rastertoescp, rastertohp, and rastertoprinter. Don't worry if you have less than this; some of these are installed by commercial add-ons to CUPS (like rastertoturboprint), others (like rastertoprinter) by third-party driver development projects (such as Gimp-Print) wanting to cooperate as closely as possible with CUPS.

Figure 19.9. Raster to printer-specific formats.

Raster to printer-specific formats.

CUPS Backends

The last part of any CUPS filtering chain is a backend. Backends are special programs that send the print-ready file to the final device. There is a separate backend program for any transfer protocol of sending printjobs over the network, or for every local interface. Every CUPS print queue needs to have a CUPS “device-URI” associated with it. The device URI is the way to encode the backend used to send the job to its destination. Network device-URIs are using two slashes in their syntax, local device URIs only one, as you can see from the following list. Keep in mind that local interface names may vary much from my examples, if your OS is not Linux:

usb

This backend sends printfiles to USB-connected printers. An example for the CUPS device-URI to use is: usb:/dev/usb/lp0.

serial

This backend sends printfiles to serially connected printers. An example for the CUPS device-URI to use is: serial:/dev/ttyS0?baud=11500.

parallel

This backend sends printfiles to printers connected to the parallel port. An example for the CUPS device-URI to use is: parallel:/dev/lp0.

scsi

This backend sends printfiles to printers attached to the SCSI interface. An example for the CUPS device-URI to use is: scsi:/dev/sr1.

lpd

This backend sends printfiles to LPR/LPD connected network printers. An example for the CUPS device-URI to use is: lpd://remote_host_name/remote_queue_name.

AppSocket/HP JetDirect

This backend sends printfiles to AppSocket (a.k.a. "HP JetDirect") connected network printers. An example for the CUPS device-URI to use is: socket://10.11.12.13:9100.

ipp

This backend sends printfiles to IPP connected network printers (or to other CUPS servers). Examples for CUPS device-URIs to use are: ipp:://192.193.194.195/ipp (for many HP printers) or ipp://remote_cups_server/printers/remote_printer_name.

http

This backend sends printfiles to HTTP connected printers. (The http:// CUPS backend is only a symlink to the ipp:// backend.) Examples for the CUPS device-URIs to use are: http:://192.193.194.195:631/ipp (for many HP printers) or http://remote_cups_server:631/printers/remote_printer_name.

smb

This backend sends printfiles to printers shared by a Windows host. An example for CUPS device-URIs that may be used includes:

smb://workgroup/server/printersharename
smb://server/printersharename
smb://username:password@workgroup/server/printersharename
smb://username:password@server/printersharename

The smb:// backend is a symlink to the Samba utility smbspool (does not ship with CUPS). If the symlink is not present in your CUPS backend directory, have your root user create it: ln -s `which smbspool' /usr/lib/cups/backend/smb.

It is easy to write your own backends as shell or Perl scripts, if you need any modification or extension to the CUPS print system. One reason could be that you want to create “special” printers that send the printjobs as email (through a “mailto:/” backend), convert them to PDF (through a “pdfgen:/” backend) or dump them to “/dev/null”. (In fact I have the system-wide default printer set up to be connected to a devnull:/ backend: there are just too many people sending jobs without specifying a printer, or scripts and programs which do not name a printer. The system-wide default deletes the job and sends a polite email back to the $USER asking him to always specify the correct printer name.)

Not all of the mentioned backends may be present on your system or usable (depending on your hardware configuration). One test for all available CUPS backends is provided by the lpinfo utility. Used with the -v parameter, it lists all available backends:

$ lpinfo -v

The Role of cupsomatic/foomatic

cupsomatic filters may be the most widely used on CUPS installations. You must be clear about the fact that these were not developed by the CUPS people. They are a third party add-on to CUPS. They utilize the traditional Ghostscript devices to render jobs for CUPS. When troubleshooting, you should know about the difference. Here the whole rendering process is done in one stage, inside Ghostscript, using an appropriate device for the target printer. cupsomatic uses PPDs that are generated from the Foomatic Printer & Driver Database at Linuxprinting.org.

You can recognize these PPDs from the line calling the cupsomatic filter:

 *cupsFilter: "application/vnd.cups-postscript  0  cupsomatic"

You may find this line among the first 40 or so lines of the PPD file. If you have such a PPD installed, the printer shows up in the CUPS Web interface with a foomatic namepart for the driver description. cupsomatic is a Perl script that runs Ghostscript with all the complicated command line options auto-constructed from the selected PPD and command line options give to the printjob.

However, cupsomatic is now deprecated. Its PPDs (especially the first generation of them, still in heavy use out there) are not meeting the Adobe specifications. You might also suffer difficulties when you try to download them with “Point'n'Print” to Windows clients. A better and more powerful successor is now in a stable beta-version: it is called foomatic-rip. To use foomatic-rip as a filter with CUPS, you need the new-type PPDs. These have a similar but different line:

 *cupsFilter: "application/vnd.cups-postscript  0  foomatic-rip"

The PPD generating engine at Linuxprinting.org has been revamped. The new PPDs comply to the Adobe spec. On top, they also provide a new way to specify different quality levels (hi-res photo, normal color, grayscale, and draft) with a single click, whereas before you could have required five or more different selections (media type, resolution, inktype and dithering algorithm). There is support for custom-size media built in. There is support to switch print-options from page to page in the middle of a job. And the best thing is the new foomatic-rip now works seamlessly with all legacy spoolers too (like LPRng, BSD-LPD, PDQ, PPR and so on), providing for them access to use PPDs for their printing.

The Complete Picture

If you want to see an overview of all the filters and how they relate to each other, the complete picture of the puzzle is at the end of this document.

mime.convs

CUPS auto-constructs all possible filtering chain paths for any given MIME type, and every printer installed. But how does it decide in favor or against a specific alternative? (There may often be cases where there is a choice of two or more possible filtering chains for the same target printer.) Simple. You may have noticed the figures in the third column of the mime.convs file. They represent virtual costs assigned to this filter. Every possible filtering chain will sum up to a total “filter cost.” CUPS decides for the most “inexpensive” route.

Tip

The setting of FilterLimit 1000 in cupsd.conf will not allow more filters to run concurrently than will consume a total of 1000 virtual filter cost. This is an efficient way to limit the load of any CUPS server by setting an appropriate “FilterLimit” value. A FilterLimit of 200 allows roughly one job at a time, while a FilterLimit of 1000 allows approximately five jobs maximum at a time.

Raw” Printing

You can tell CUPS to print (nearly) any file “raw”. “Raw” means it will not be filtered. CUPS will send the file to the printer “as is” without bothering if the printer is able to digest it. Users need to take care themselves that they send sensible data formats only. Raw printing can happen on any queue if the “-o raw” option is specified on the command line. You can also set up raw-only queues by simply not associating any PPD with it. This command:

$ lpadmin -P rawprinter -v socket://11.12.13.14:9100 -E

sets up a queue named “rawprinter”, connected via the “socket” protocol (a.k.a. “HP JetDirect”) to the device at IP address 11.12.1.3.14, using port 9100. (If you had added a PPD with -P /path/to/PPD to this command line, you would have installed a “normal” print queue.

CUPS will automatically treat each job sent to a queue as a “raw” one, if it can't find a PPD associated with the queue. However, CUPS will only send known MIME types (as defined in its own mime.types file) and refuse others.

application/octet-stream Printing

Any MIME type with no rule in the /etc/cups/mime.types file is regarded as unknown or application/octet-stream and will not be sent. Because CUPS refuses to print unknown MIME types per default, you will probably have experienced the fact that print jobs originating from Windows clients were not printed. You may have found an error message in your CUPS logs like:

Unable to convert file 0 to printable format for job

To enable the printing of application/octet-stream files, edit these two files:

  • /etc/cups/mime.convs

  • /etc/cups/mime.types

Both contain entries (at the end of the respective files) which must be uncommented to allow RAW mode operation for application/octet-stream. In /etc/cups/mime.types make sure this line is present:

application/octet-stream

This line (with no specific auto-typing rule set) makes all files not otherwise auto-typed a member of application/octet-stream. In /etc/cups/mime.convs, have this line:

application/octet-stream   application/vnd.cups-raw   0   -

This line tells CUPS to use the Null Filter (denoted as “-”, doing nothing at all) on application/octet-stream, and tag the result as application/vnd.cups-raw. This last one is always a green light to the CUPS scheduler to now hand the file over to the backend connecting to the printer and sending it over.

Note

Editing the mime.convs and the mime.types file does not enforceraw” printing, it only allows it.

Background.  CUPS being a more security-aware printing system than traditional ones does not by default allow one to send deliberate (possibly binary) data to printing devices. (This could be easily abused to launch a Denial of Service attack on your printer(s), causing at least the loss of a lot of paper and ink...) “Unknown” data are regarded by CUPS as MIME type application/octet-stream. While you can send data “raw”, the MIME type for these must be one that is known to CUPS and an allowed one. The file /etc/cups/mime.types defines the “rules” of how CUPS recognizes MIME types. The file /etc/cups/mime.convs decides which file conversion filter(s) may be applied to which MIME types.

PostScript Printer Descriptions (PPDs) for Non-PS Printers

Originally PPDs were meant to be used for PostScript printers only. Here, they help to send device-specific commands and settings to the RIP which processes the jobfile. CUPS has extended this scope for PPDs to cover non-PostScript printers too. This was not difficult, because it is a standardized file format. In a way it was logical too: CUPS handles PostScript and uses a PostScript RIP (Ghostscript) to process the jobfiles. The only difference is: a PostScript printer has the RIP built-in, for other types of printers the Ghostscript RIP runs on the host computer.

PPDs for a non-PS printer have a few lines that are unique to CUPS. The most important one looks similar to this:

 *cupsFilter: application/vnd.cups-raster  66   rastertoprinter

It is the last piece in the CUPS filtering puzzle. This line tells the CUPS daemon to use as a last filter rastertoprinter. This filter should be served as input an application/vnd.cups-raster MIME type file. Therefore, CUPS should auto-construct a filtering chain, which delivers as its last output the specified MIME type. This is then taken as input to the specified rastertoprinter filter. After this the last filter has done its work (rastertoprinter is a Gimp-Print filter), the file should go to the backend, which sends it to the output device.

CUPS by default ships only a few generic PPDs, but they are good for several hundred printer models. You may not be able to control different paper trays, or you may get larger margins than your specific model supports. See for summary information.

Table 19.1. PPDs shipped with CUPS

PPD filePrinter type
deskjet.ppdolder HP inkjet printers and compatible
deskjet2.ppdnewer HP inkjet printers and compatible
dymo.ppdlabel printers
epson9.ppdEpson 24pin impact printers and compatible
epson24.ppdEpson 24pin impact printers and compatible
okidata9.ppdOkidata 9pin impact printers and compatible
okidat24.ppdOkidata 24pin impact printers and compatible
stcolor.ppdolder Epson Stylus Color printers
stcolor2.ppdnewer Epson Stylus Color printers
stphoto.ppdolder Epson Stylus Photo printers
stphoto2.ppdnewer Epson Stylus Photo printers
laserjet.ppdall PCL printers. Further below is a discussion of several other driver/PPD-packages suitable for use with CUPS.

cupsomatic/foomatic-rip Versus native CUPS Printing

Native CUPS rasterization works in two steps:

  • First is the pstoraster step. It uses the special CUPS device from ESP Ghostscript 7.05.x as its tool.

  • Second comes the rasterdriver step. It uses various device-specific filters; there are several vendors who provide good quality filters for this step. Some are free software, some are shareware/non-free and some are proprietary.

Often this produces better quality (and has several more advantages) than other methods.

Figure 19.10. cupsomatic/foomatic Processing versus Native CUPS.

cupsomatic/foomatic Processing versus Native CUPS.

One other method is the cupsomatic/foomatic-rip way. Note that cupsomatic is not made by the CUPS developers. It is an independent contribution to printing development, made by people from Linuxprinting.org [4]. cupsomatic is no longer developed and maintained and is no longer supported. It has now been replaced by foomatic-rip. foomatic-rip is a complete re-write of the old cupsomatic idea, but very much improved and generalized to other (non-CUPS) spoolers. An upgrade to foomatic-rip is strongly advised, especially if you are upgrading to a recent version of CUPS, too.

Both the cupsomatic (old) and the foomatic-rip (new) methods from Linuxprinting.org use the traditional Ghostscript print file processing, doing everything in a single step. It therefore relies on all the other devices built into Ghostscript. The quality is as good (or bad) as Ghostscript rendering is in other spoolers. The advantage is that this method supports many printer models not supported (yet) by the more modern CUPS method.

Of course, you can use both methods side by side on one system (and even for one printer, if you set up different queues) and find out which works best for you.

cupsomatic kidnaps the printfile after the application/vnd.cups-postscript stage and deviates it through the CUPS-external, system-wide Ghostscript installation. Therefore the printfile bypasses the pstoraster filter (and also bypasses the CUPS-raster-drivers rastertosomething). After Ghostscript finished its rasterization, cupsomatic hands the rendered file directly to the CUPS backend. The flowchart in illustrates the difference between native CUPS rendering and the Foomatic/cupsomatic method.

Examples for Filtering Chains

Here are a few examples of commonly occurring filtering chains to illustrate the workings of CUPS.

Assume you want to print a PDF file to an HP JetDirect-connected PostScript printer, but you want to print the pages 3-5, 7, 11-13 only, and you want to print them “two-up” and “duplex”:

  • Your print options (page selection as required, two-up, duplex) are passed to CUPS on the command line.

  • The (complete) PDF file is sent to CUPS and autotyped as application/pdf.

  • The file therefore must first pass the pdftops pre-filter, which produces PostScript MIME type application/postscript (a preview here would still show all pages of the original PDF).

  • The file then passes the pstops filter that applies the command line options: it selects the pages 2-5, 7 and 11-13, creates an imposed layout “2 pages on 1 sheet” and inserts the correct “duplex” command (as defined in the printer's PPD) into the new PostScript file; the file is now of PostScript MIME type application/vnd.cups-postscript.

  • The file goes to the socket backend, which transfers the job to the printers.

The resulting filter chain, therefore, is as drawn in .

Figure 19.11. PDF to socket chain.

PDF to socket chain.

Assume your want to print the same filter to an USB-connected Epson Stylus Photo printer installed with the CUPS stphoto2.ppd. The first few filtering stages are nearly the same:

  • Your print options (page selection as required, two-up, duplex) are passed to CUPS on the commandline.

  • The (complete) PDF file is sent to CUPS and autotyped as application/pdf.

  • The file must first pass the pdftops pre-filter, which produces PostScript MIME type application/postscript (a preview here would still show all pages of the original PDF).

  • The file then passes the “pstops” filter that applies the commandline options: it selects the pages 2-5, 7 and 11-13, creates an imposed layout “two pages on one sheet” and inserts the correct “duplex” command... (Oops this printer and PPD do not support duplex printing at all so this option will be ignored) into the new PostScript file; the file is now of PostScript MIME type application/vnd.cups-postscript.

  • The file then passes the pstoraster stage and becomes MIME type application/ cups-raster.

  • Finally, the rastertoepson filter does its work (as indicated in the printer's PPD), creating the rinter-specific raster data and embedding any user-selected print-options into the print data stream.

  • The file goes to the usb backend, which transfers the job to the printers.

The resulting filter chain therefore is as drawn in .

Figure 19.12. PDF to USB chain.

PDF to USB chain.

Sources of CUPS Drivers/PPDs

On the Internet you can now find many thousands of CUPS-PPD files (with their companion filters), in many national languages supporting more than thousand non-PostScript models.

  • ESP PrintPro (commercial, non-free) is packaged with more than three thousand PPDs, ready for successful use “out of the box” on Linux, Mac OS X, IBM-AIX, HP-UX, Sun-Solaris, SGI-IRIX, Compaq Tru64, Digital UNIX, and some more commercial Unices (it is written by the CUPS developers themselves and its sales help finance the further development of CUPS, as they feed their creators).

  • The Gimp-Print-Project (GPL, free software) provides around 140 PPDs (supporting nearly 400 printers, many driven to photo quality output), to be used alongside the Gimp-Print CUPS filters.

  • TurboPrint (shareware, non-free) supports roughly the same amount of printers in excellent quality.

  • OMNI (LPGL, free) is a package made by IBM, now containing support for more than 400 printers, stemming from the inheritance of IBM OS/2 Know-How ported over to Linux (CUPS support is in a beta-stage at present).

  • HPIJS (BSD-style licenses, free) supports around 150 of HP's own printers and is also providing excellent print quality now (currently available only via the Foomatic path).

  • Foomatic/cupsomatic (LPGL, free) from Linuxprinting.org are providing PPDs for practically every Ghostscript filter known to the world (including Omni, Gimp-Print and HPIJS).

Printing with Interface Scripts

CUPS also supports the usage of “interface scripts” as known from System V AT&T printing systems. These are often used for PCL printers, from applications that generate PCL print jobs. Interface scripts are specific to printer models. They have a similar role as PPDs for PostScript printers. Interface scripts may inject the Escape sequences as required into the print data stream, if the user has chosen to select a certain paper tray, or print landscape, or use A3 paper, etc. Interfaces scripts are practically unknown in the Linux realm. On HP-UX platforms they are more often used. You can use any working interface script on CUPS too. Just install the printer with the -i option:

root# lpadmin -p pclprinter -v socket://11.12.13.14:9100 \
  -i /path/to/interface-script

Interface scripts might be the “unknown animal” to many. However, with CUPS they provide the easiest way to plug in your own custom-written filtering script or program into one specific print queue (some information about the traditional usage of interface scripts is to be found at http://playground.sun.com/printing/documentation/interface.html).

Network Printing (Purely Windows)

Network printing covers a lot of ground. To understand what exactly goes on with Samba when it is printing on behalf of its Windows clients, let's first look at a “purely Windows” setup: Windows clients with a Windows NT print server.

From Windows Clients to an NT Print Server

Windows clients printing to an NT-based print server have two options. They may:

  • Execute the driver locally and render the GDI output (EMF) into the printer-specific format on their own.

  • Send the GDI output (EMF) to the server, where the driver is executed to render the printer specific output.

Both print paths are shown in the flowcharts in the figures below.

Driver Execution on the Client

In the first case the print server must spool the file as raw, meaning it shouldn't touch the jobfile and try to convert it in any way. This is what a traditional UNIX-based print server can do too, and at a better performance and more reliably than an NT print server. This is what most Samba administrators probably are familiar with. One advantage of this setup is that this “spooling-only” print server may be used even if no driver(s) for UNIX are available it is sufficient to have the Windows client drivers available; and installed on the clients.

Figure 19.13. Print driver execution on the client.

Print driver execution on the client.

Driver Execution on the Server

The other path executes the printer driver on the server. The client transfers print files in EMF format to the server. The server uses the PostScript, PCL, ESC/P or other driver to convert the EMF file into the printer-specific language. It is not possible for UNIX to do the same. Currently, there is no program or method to convert a Windows client's GDI output on a UNIX server into something a printer could understand.

Figure 19.14. Print driver execution on the server.

Print driver execution on the server.

However, there is something similar possible with CUPS. Read on.

Network Printing (Windows Clients UNIX/Samba Print Servers)

Since UNIX print servers cannot execute the Win32 program code on their platform, the picture is somewhat different. However, this does not limit your options all that much. On the contrary, you may have a way here to implement printing features that are not possible otherwise.

From Windows Clients to a CUPS/Samba Print Server

Here is a simple recipe showing how you can take advantage of CUPS' powerful features for the benefit of your Windows network printing clients:

  • Let the Windows clients send PostScript to the CUPS server.

  • Let the CUPS server render the PostScript into device-specific raster format.

This requires the clients to use a PostScript driver (even if the printer is a non-PostScript model. It also requires that you have a driver on the CUPS server.

First, to enable CUPS-based rinting through Samba the following options should be set in your smb.conf file [global] section:

printing = cups
printcap = cups

When these parameters are specified, all manually set print directives (like print command, or lppause command) in smb.conf (as well as in Samba itself) will be ignored. Instead, Samba will directly interface with CUPS through its application program interface (API), as long as Samba has been compiled with CUPS library (libcups) support. If Samba has not been compiled with CUPS support, and if no other print commands are set up, then printing will use the System V AT&T command set, with the -oraw option automatically passing through (if you want your own defined print commands to work with a Samba that has CUPS support compiled in, simply use printing = sysv).

Figure 19.15. Printing via CUPS/Samba server.

Printing via CUPS/Samba server.

Samba Receiving Jobfiles and Passing Them to CUPS

Samba must use its own spool directory (it is set by a line similar to path = /var/spool/samba, in the [printers] or [printername] section of smb.conf). Samba receives the job in its own spool space and passes it into the spool directory of CUPS (the CUPS spooling directory is set by the RequestRoot directive, in a line that defaults to RequestRoot /var/spool/cups). CUPS checks the access rights of its spool dir and resets it to healthy values with every restart. We have seen quite a few people who had used a common spooling space for Samba and CUPS, and were struggling for weeks with this “problem.

A Windows user authenticates only to Samba (by whatever means is configured). If Samba runs on the same host as CUPS, you only need to allow “localhost” to print. If they run on different machines, you need to make sure the Samba host gets access to printing on CUPS.

Network PostScript RIP

This section discusses the use of CUPS filters on the server configuration where clients make use of a PostScript driver with CUPS-PPDs.

PPDs can control all print device options. They are usually provided by the manufacturer, if you own a PostScript printer, that is. PPD files (PostScript Printer Descriptions) are always a component of PostScript printer drivers on MS Windows or Apple Mac OS systems. They are ASCII files containing user-selectable print options, mapped to appropriate PostScript, PCL or PJL commands for the target printer. Printer driver GUI dialogs translate these options “on-the-fly” into buttons and drop-down lists for the user to select.

CUPS can load, without any conversions, the PPD file from any Windows (NT is recommended) PostScript driver and handle the options. There is a Web browser interface to the print options (select http://localhost:631/printers/ and click on one Configure Printer button to see it), or a command line interface (see man lpoptions or see if you have lphelp on your system). There are also some different GUI frontends on Linux/UNIX, which can present PPD options to users. PPD options are normally meant to be evaluated by the PostScript RIP on the real PostScript printer.

PPDs for Non-PS Printers on UNIX

CUPS does not limit itself to “real” PostScript printers in its usage of PPDs. The CUPS developers have extended the scope of the PPD concept to also describe available device and driver options for non-PostScript printers through CUPS-PPDs.

This is logical, as CUPS includes a fully featured PostScript interpreter (RIP). This RIP is based on Ghostscript. It can process all received PostScript (and additionally many other file formats) from clients. All CUPS-PPDs geared to non-PostScript printers contain an additional line, starting with the keyword *cupsFilter. This line tells the CUPS print system which printer-specific filter to use for the interpretation of the supplied PostScript. Thus CUPS lets all its printers appear as PostScript devices to its clients, because it can act as a PostScript RIP for those printers, processing the received PostScript code into a proper raster print format.

PPDs for Non-PS Printers on Windows

CUPS-PPDs can also be used on Windows-Clients, on top of a “core” PostScript driver (now recommended is the "CUPS PostScript Driver for WindowsNT/200x/XP"; you can also use the Adobe one, with limitations). This feature enables CUPS to do a few tricks no other spooler can do:

  • Act as a networked PostScript RIP (Raster Image Processor), handling printfiles from all client platforms in a uniform way.

  • Act as a central accounting and billing server, since all files are passed through the pstops filter and are, therefore, logged in the CUPS page_log file. Note: this cannot happen with “raw” print jobs, which always remain unfiltered per definition.

  • Enable clients to consolidate on a single PostScript driver, even for many different target printers.

Using CUPS PPDs on Windows clients enables these to control all print job settings just as a UNIX client can do.

Windows Terminal Servers (WTS) as CUPS Clients

This setup may be of special interest to people experiencing major problems in WTS environments. WTS often need a multitude of non-PostScript drivers installed to run their clients' variety of different printer models. This often imposes the price of much increased instability.

Printer Drivers Running in “Kernel Mode” Cause Many Problems

In Windows NT printer drivers which run in “Kernel Mode”, introduces a high risk for the stability of the system if the driver is not really stable and well-tested. And there are a lot of bad drivers out there! Especially notorious is the example of the PCL printer driver that had an additional sound module running, to notify users via soundcard of their finished jobs. Do I need to say that this one was also reliably causing “blue screens of death” on a regular basis?

PostScript drivers are generally well tested. They are not known to cause any problems, even though they also run in kernel mode. This might be because there have been so far only two different PostScript drivers: the ones from Adobe and the one from Microsoft. Both are well tested and are as stable as you can imagine on Windows. The CUPS driver is derived from the Microsoft one.

Workarounds Impose Heavy Limitations

In many cases, in an attempt to work around this problem, site administrators have resorted to restricting the allowed drivers installed on their WTS to one generic PCL and one PostScript driver. This, however, restricts the clients in the number of printer options available for them. Often they can't get out more than simplex prints from one standard paper tray, while their devices could do much better, if driven by a different driver!

CUPS: A “Magical Stone”?

Using a PostScript driver, enabled with a CUPS-PPD, seems to be a very elegant way to overcome all these shortcomings. There are, depending on the version of Windows OS you use, up to three different PostScript drivers available: Adobe, Microsoft and CUPS PostScript drivers. None of them is known to cause major stability problems on WTS (even if used with many different PPDs). The clients will be able to (again) chose paper trays, duplex printing and other settings. However, there is a certain price for this too: a CUPS server acting as a PostScript RIP for its clients requires more CPU and RAM than when just acting as a “raw spooling” device. Plus, this setup is not yet widely tested, although the first feedbacks look very promising.

PostScript Drivers with No Major Problems Even in Kernel Mode

More recent printer drivers on W200x and XP no longer run in kernel mode (unlike Windows NT). However, both operating systems can still use the NT drivers, running in kernel mode (you can roughly tell which is which as the drivers in subdirectory “2” of “W32X86” are “old” ones). As was said before, the Adobe as well as the Microsoft PostScript drivers are not known to cause any stability problems. The CUPS driver is derived from the Microsoft one. There is a simple reason for this: The MS DDK (Device Development Kit) for Windows NT (which used to be available at no cost to licensees of Visual Studio) includes the source code of the Microsoft driver, and licensees of Visual Studio are allowed to use and modify it for their own driver development efforts. This is what the CUPS people have done. The license does not allow them to publish the whole of the source code. However, they have released the “diff” under the GPL, and if you are the owner of an “MS DDK for Windows NT,” you can check the driver yourself.

Configuring CUPS for Driver Download

As we have said before, all previously known methods to prepare client printer drivers on the Samba server for download and Point'n'Print convenience of Windows workstations are working with CUPS, too. These methods were described in the previous chapter. In reality, this is a pure Samba business and only relates to the Samba/Windows client relationship.

cupsaddsmb: The Unknown Utility

The cupsaddsmb utility (shipped with all current CUPS versions) is an alternate method to transfer printer drivers into the Samba [print$] share. Remember, this share is where clients expect drivers deposited and setup for download and installation. It makes the sharing of any (or all) installed CUPS printers quite easy. cupsaddsmb can use the Adobe PostScript driver as well as the newly developed CUPS PostScript Driver for Windows NT/200x/XP. cupsaddsmb does not work with arbitrary vendor printer drivers, but only with the exact driver files that are named in its man page.

The CUPS printer driver is available from the CUPS download site. Its package name is cups-samba-[version].tar.gz . It is preferred over the Adobe drivers since it has a number of advantages:

  • It supports a much more accurate page accounting.

  • It supports banner pages, and page labels on all printers.

  • It supports the setting of a number of job IPP attributes (such as job-priority, page-label and job-billing).

However, currently only Windows NT, 2000 and XP are supported by the CUPS drivers. You will also need to get the respective part of Adobe driver if you need to support Windows 95, 98 and ME clients.

Prepare Your smb.conf for cupsaddsmb

Prior to running cupsaddsmb, you need the settings in smb.conf as shown in :

Example 19.3. smb.conf for cupsaddsmb usage

[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
# setting depends on your requirements
guest ok = yes
writable = no
printable = yes
printer admin = root
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root

CUPS “PostScript Driver for Windows NT/200x/XP

CUPS users may get the exact same packages from http://www.cups.org/software.html. It is a separate package from the CUPS base software files, tagged as CUPS 1.1.x Windows NT/200x/XP Printer Driver for Samba (tar.gz, 192k). The filename to download is cups-samba-1.1.x.tar.gz. Upon untar and unzipping, it will reveal these files:

root# tar xvzf cups-samba-1.1.19.tar.gz
cups-samba.install
cups-samba.license
cups-samba.readme
cups-samba.remove
cups-samba.ss

These have been packaged with the ESP meta packager software EPM. The *.install and *.remove files are simple shell scripts, which untars the *.ss (the *.ss is nothing else but a tar-archive, which can be untarred by “tar” too). Then it puts the content into /usr/share/cups/drivers/. This content includes three files:

root# tar tv cups-samba.ss
cupsdrvr.dll
cupsui.dll
cups.hlp  

The cups-samba.install shell scripts are easy to handle:

root# ./cups-samba.install
[....]
Installing software...
Updating file permissions...
Running post-install commands...
Installation is complete.       

The script should automatically put the driver files into the /usr/share/cups/drivers/ directory.

Warning

Due to a bug, one recent CUPS release puts the cups.hlp driver file into/usr/share/drivers/ instead of /usr/share/cups/drivers/. To work around this, copy/move the file (after running the ./cups-samba.install script) manually to the correct place.

root# cp /usr/share/drivers/cups.hlp /usr/share/cups/drivers/

This new CUPS PostScript driver is currently binary-only, but free of charge. No complete source code is provided (yet). The reason is that it has been developed with the help of the Microsoft Driver Developer Kit (DDK) and compiled with Microsoft Visual Studio 6. Driver developers are not allowed to distribute the whole of the source code as free software. However, CUPS developers released the “diff” in source code under the GPL, so anybody with a license of Visual Studio and a DDK will be able to compile for him/herself.

Recognizing Different Driver Files

The CUPS drivers do not support the older Windows 95/98/Me, but only the Windows NT/2000/XP client.

Windows NT, 2000 and XP are supported by:

  • cups.hlp
  • cupsdrvr.dll
  • cupsui.dll

Adobe drivers are available for the older Windows 95/98/Me as well as the Windows NT/2000/XP clients. The set of files is different from the different platforms.

Windows 95, 98 and ME are supported by:

  • ADFONTS.MFM
  • ADOBEPS4.DRV
  • ADOBEPS4.HLP
  • DEFPRTR2.PPD
  • ICONLIB.DLL
  • PSMON.DLL

Windows NT, 2000 and XP are supported by:

  • ADOBEPS5.DLL
  • ADOBEPSU.DLL
  • ADOBEPSU.HLP

Note

If both the Adobe driver files and the CUPS driver files for the support of Windows NT/200x/XP are present in FIXME, the Adobe ones will be ignored and the CUPS ones will be used. If you prefer for whatever reason to use Adobe-only drivers, move away the three CUPS driver files. The Windows 9x/Me clients use the Adobe drivers in any case.

Acquiring the Adobe Driver Files

Acquiring the Adobe driver files seems to be unexpectedly difficult for many users. They are not available on the Adobe Web site as single files and the self-extracting and/or self-installing Windows-.exe is not easy to locate either. Probably you need to use the included native installer and run the installation process on one client once. This will install the drivers (and one Generic PostScript printer) locally on the client. When they are installed, share the Generic PostScript printer. After this, the client's [print$] share holds the Adobe files, from where you can get them with smbclient from the CUPS host.

ESP Print Pro PostScript Driver for Windows NT/200x/XP

Users of the ESP Print Pro software are able to install their Samba drivers package for this purpose with no problem. Retrieve the driver files from the normal download area of the ESP Print Pro software at http://www.easysw.com/software.html. You need to locate the link labelled “SAMBA” among the Download Printer Drivers for ESP Print Pro 4.x area and download the package. Once installed, you can prepare any driver by simply highlighting the printer in the Printer Manager GUI and select Export Driver... from the menu. Of course you need to have prepared Samba beforehand to handle the driver files; i.e., setup the [print$] share, and so on. The ESP Print Pro package includes the CUPS driver files as well as a (licensed) set of Adobe drivers for the Windows 95/98/Me client family.

Caveats to be Considered

Once you have run the install script (and possibly manually moved the cups.hlp file to /usr/share/cups/drivers/), the driver is ready to be put into Samba's [print$] share (which often maps to /etc/samba/drivers/ and contains a subdirectory tree with WIN40 and W32X86 branches). You do this by running cupsaddsmb (see also man cupsaddsmb for CUPS since release 1.1.16).

Tip

You may need to put root into the smbpasswd file by running smbpasswd; this is especially important if you should run this whole procedure for the first time, and are not working in an environment where everything is configured for single sign on to a Windows Domain Controller.

Once the driver files are in the [print$] share and are initialized, they are ready to be downloaded and installed by the Windows NT/200x/XP clients.

Note

Win 9x/Me clients will not work with the CUPS PostScript driver. For these you still need to use the ADOBE*.* drivers as previously stated.

Note

It is not harmful if you still have the ADOBE*.* driver files from previous installations in the /usr/share/cups/drivers/ directory. The new cupsaddsmb (from 1.1.16) will automatically prefer its own drivers if it finds both.

Note

Should your Windows clients have had the old ADOBE*.* files for the Adobe PostScript driver installed, the download and installation of the new CUPS PostScript driver for Windows NT/200x/XP will fail at first. You need to wipe the old driver from the clients first. It is not enough to “delete” the printer, as the driver files will still be kept by the clients and re-used if you try to re-install the printer. To really get rid of the Adobe driver files on the clients, open the Printers folder (possibly via Start > Settings > Control Panel > Printers), right-click on the folder background and select Server Properties. When the new dialog opens, select the Drivers tab. On the list select the driver you want to delete and click the Delete button. This will only work if there is not one single printer left that uses that particular driver. You need to “delete” all printers using this driver in the Printers folder first. You will need Administrator privileges to do this.

Note

Once you have successfully downloaded the CUPS PostScript driver to a client, you can easily switch all printers to this one by proceeding as described in . Either change a driver for an existing printer by running the Printer Properties dialog, or use rpcclient with the setdriver subcommand.

Windows CUPS PostScript Driver Versus Adobe Driver

Are you interested in a comparison between the CUPS and the Adobe PostScript drivers? For our purposes these are the most important items that weigh in favor of the CUPS ones:

  • No hassle with the Adobe EULA.

  • No hassle with the question “Where do I get the ADOBE*.* driver files from?

  • The Adobe drivers (on request of the printer PPD associated with them) often put a PJL header in front of the main PostScript part of the print file. Thus, the printfile starts with <1B >%-12345X or <escape>%-12345X instead of %!PS). This leads to the CUPS daemon auto-typing the incoming file as a print-ready file, not initiating a pass through the pstops filter (to speak more technically, it is not regarded as the generic MIME-type application/postscript, but as the more special MIME type application/cups.vnd-postscript), which therefore also leads to the page accounting in /var/log/cups/page_log not receiving the exact number of pages; instead the dummy page number of “1” is logged in a standard setup).

  • The Adobe driver has more options to misconfigure the PostScript generated by it (like setting it inadvertently to Optimize for Speed, instead of Optimize for Portability, which could lead to CUPS being unable to process it).

  • The CUPS PostScript driver output sent by Windows clients to the CUPS server is guaranteed to auto-type as the generic MIME type application/postscript, thus passing through the CUPS pstops filter and logging the correct number of pages in the page_log for accounting and quota purposes.

  • The CUPS PostScript driver supports the sending of additional standard (IPP) print options by Windows NT/200x/XP clients. Such additional print options are: naming the CUPS standard banner pages (or the custom ones, should they be installed at the time of driver download), using the CUPS page-label option, setting a job-priority, and setting the scheduled time of printing (with the option to support additional useful IPP job attributes in the future).

  • The CUPS PostScript driver supports the inclusion of the new *cupsJobTicket comments at the beginning of the PostScript file (which could be used in the future for all sort of beneficial extensions on the CUPS side, but which will not disturb any other applications as they will regard it as a comment and simply ignore it).

  • The CUPS PostScript driver will be the heart of the fully fledged CUPS IPP client for Windows NT/200x/XP to be released soon (probably alongside the first beta release for CUPS 1.2).

Run cupsaddsmb (Quiet Mode)

The cupsaddsmb command copies the needed files into your [print$] share. Additionally, the PPD associated with this printer is copied from /etc/cups/ppd/ to [print$]. There the files wait for convenient Windows client installations via Point'n'Print. Before we can run the command successfully, we need to be sure that we can authenticate toward Samba. If you have a small network, you are probably using user-level security (security = user).

Here is an example of a successfully run cupsaddsmb command:

root# cupsaddsmb -U root infotec_IS2027
Password for root required to access localhost via Samba: ['secret']

To share all printers and drivers, use the -a parameter instead of a printer name. Since cupsaddsmbexports” the printer drivers to Samba, it should be obvious that it only works for queues with a CUPS driver associated.

Run cupsaddsmb with Verbose Output

Probably you want to see what's going on. Use the -v parameter to get a more verbose output. The output below was edited for better readability: all “\” at the end of a line indicate that I inserted an artificial line break plus some indentation here:

Warning

You will see the root password for the Samba account printed on screen.

root# cupsaddsmb -U root -v infotec_2105
Password for root required to access localhost via GANDALF:
Running command: smbclient //localhost/print\$ -N -U'root%secret' \
    -c 'mkdir W32X86; \
    put /var/spool/cups/tmp/3e98bf2d333b5 W32X86/infotec_2105.ppd; \
	put /usr/share/cups/drivers/cupsdrvr.dll W32X86/cupsdrvr.dll; \
    put /usr/share/cups/drivers/cupsui.dll W32X86/cupsui.dll; \
    put /usr/share/cups/drivers/cups.hlp W32X86/cups.hlp'
added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
NT_STATUS_OBJECT_NAME_COLLISION making remote directory \W32X86
putting file /var/spool/cups/tmp/3e98bf2d333b5 as \W32X86/infotec_2105.ppd
putting file /usr/share/cups/drivers/cupsdrvr.dll as \W32X86/cupsdrvr.dll
putting file /usr/share/cups/drivers/cupsui.dll as \W32X86/cupsui.dll
putting file /usr/share/cups/drivers/cups.hlp as \W32X86/cups.hlp
  
Running command: rpcclient localhost -N -U'root%secret' 
   -c 'adddriver "Windows NT x86"   \
   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
    RAW:NULL"'
cmd = adddriver "Windows NT x86" \
   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
	RAW:NULL"
Printer Driver infotec_2105 successfully installed.
  
Running command: smbclient //localhost/print\$ -N -U'root%secret' \
-c 'mkdir WIN40; \
    put /var/spool/cups/tmp/3e98bf2d333b5 WIN40/infotec_2105.PPD; \
	put /usr/share/cups/drivers/ADFONTS.MFM WIN40/ADFONTS.MFM;   \
    put /usr/share/cups/drivers/ADOBEPS4.DRV WIN40/ADOBEPS4.DRV; \
    put /usr/share/cups/drivers/ADOBEPS4.HLP WIN40/ADOBEPS4.HLP; \
    put /usr/share/cups/drivers/DEFPRTR2.PPD WIN40/DEFPRTR2.PPD; \
	put /usr/share/cups/drivers/ICONLIB.DLL WIN40/ICONLIB.DLL; \
	put /usr/share/cups/drivers/PSMON.DLL WIN40/PSMON.DLL;'
  added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
  Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
  NT_STATUS_OBJECT_NAME_COLLISION making remote directory \WIN40
  putting file /var/spool/cups/tmp/3e98bf2d333b5 as \WIN40/infotec_2105.PPD
  putting file /usr/share/cups/drivers/ADFONTS.MFM as \WIN40/ADFONTS.MFM
  putting file /usr/share/cups/drivers/ADOBEPS4.DRV as \WIN40/ADOBEPS4.DRV
  putting file /usr/share/cups/drivers/ADOBEPS4.HLP as \WIN40/ADOBEPS4.HLP
  putting file /usr/share/cups/drivers/DEFPRTR2.PPD as \WIN40/DEFPRTR2.PPD
  putting file /usr/share/cups/drivers/ICONLIB.DLL as \WIN40/ICONLIB.DLL
  putting file /usr/share/cups/drivers/PSMON.DLL as \WIN40/PSMON.DLL
  
  Running command: rpcclient localhost -N -U'root%secret' \
   -c 'adddriver "Windows 4.0"      \
   "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:ADOBEPS4.HLP: \
   PSMON.DLL:RAW:ADOBEPS4.DRV,infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL, \
    ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'
	cmd = adddriver "Windows 4.0" "infotec_2105:ADOBEPS4.DRV:\
	infotec_2105.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV,\
	infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,\
	ICONLIB.DLL"
  Printer Driver infotec_2105 successfully installed.
  
  Running command: rpcclient localhost -N -U'root%secret'  \
   -c 'setdriver infotec_2105 infotec_2105'
  cmd = setdriver infotec_2105 infotec_2105
  Successfully set infotec_2105 to driver infotec_2105.

If you look closely, you'll discover your root password was transferred unencrypted over the wire, so beware! Also, if you look further, you'll discover error messages like NT_STATUS_OBJECT_NAME_COLLISION in between. They occur, because the directories WIN40 and W32X86 already existed in the [print$] driver download share (from a previous driver installation). They are harmless here.

Understanding cupsaddsmb

What has happened? What did cupsaddsmb do? There are five stages of the procedure:

  1. Call the CUPS server via IPP and request the driver files and the PPD file for the named printer.

  2. Store the files temporarily in the local TEMPDIR (as defined in cupsd.conf).

  3. Connect via smbclient to the Samba server's [print$] share and put the files into the share's WIN40 (for Windows 9x/Me) and W32X86/ (for Windows NT/200x/XP) subdirectories.

  4. Connect via rpcclient to the Samba server and execute the adddriver command with the correct parameters.

  5. Connect via rpcclient to the Samba server a second time and execute the setdriver command.

Note

You can run the cupsaddsmb utility with parameters to specify one remote host as Samba host and a second remote host as CUPS host. Especially if you want to get a deeper understanding, it is a good idea to try it and see more clearly what is going on (though in real life most people will have their CUPS and Samba servers run on the same host):

root# cupsaddsmb -H sambaserver -h cupsserver -v printer

How to Recognize If cupsaddsmb Completed Successfully

You must always check if the utility completed successfully in all fields. You need as a minimum these three messages among the output:

  1. Printer Driver infotec_2105 successfully installed. # (for the W32X86 == Windows NT/200x/XP architecture).

  2. Printer Driver infotec_2105 successfully installed. # (for the WIN40 == Windows 9x/Me architecture).

  3. Successfully set [printerXPZ] to driver [printerXYZ].

These messages are probably not easily recognized in the general output. If you run cupsaddsmb with the -a parameter (which tries to prepare all active CUPS printer drivers for download), you might miss if individual printers drivers had problems installing properly. Here a redirection of the output will help you analyze the results in retrospective.

Note

It is impossible to see any diagnostic output if you do not run cupsaddsmb in verbose mode. Therefore, we strongly recommend to not use the default quiet mode. It will hide any problems from you that might occur.

cupsaddsmb with a Samba PDC

Can't get the standard cupsaddsmb command to run on a Samba PDC? Are you asked for the password credential all over again and again and the command just will not take off at all? Try one of these variations:

root# cupsaddsmb -U MIDEARTH\\root -v printername
root# cupsaddsmb -H SAURON -U MIDEARTH\\root -v printername
root# cupsaddsmb -H SAURON -U MIDEARTH\\root -h cups-server -v printername

(Note the two backslashes: the first one is required to “escape” the second one).

cupsaddsmb Flowchart

shows a chart about the procedures, commandflows and dataflows of the cupaddsmb command. Note again: cupsaddsmb is not intended to, and does not work with, raw queues!

Figure 19.16. cupsaddsmb flowchart.

cupsaddsmb flowchart.

Installing the PostScript Driver on a Client

After cupsaddsmb is completed, your driver is prepared for the clients to use. Here are the steps you must perform to download and install it via Point'n'Print. From a Windows client, browse to the CUPS/Samba server:

  • Open the Printers share of Samba in Network Neighborhood.

  • Right-click on the printer in question.

  • From the opening context-menu select Install... or Connect... (depending on the Windows version you use).

After a few seconds, there should be a new printer in your client's local Printers folder. On Windows XP it will follow a naming convention of PrinterName on SambaServer. (In my current case it is "infotec_2105 on kde-bitshop"). If you want to test it and send your first job from an application like Winword, the new printer appears in a \\SambaServer\PrinterName entry in the drop-down list of available printers.

cupsaddsmb will only reliably work with CUPS version 1.1.15 or higher and Samba from 2.2.4. If it does not work, or if the automatic printer driver download to the clients does not succeed, you can still manually install the CUPS printer PPD on top of the Adobe PostScript driver on clients. Then point the client's printer queue to the Samba printer share for a UNC type of connection:

C:\> net use lpt1: \\sambaserver\printershare /user:ntadmin

should you desire to use the CUPS networked PostScript RIP functions. (Note that user “ntadmin” needs to be a valid Samba user with the required privileges to access the printershare.) This sets up the printer connection in the traditional LanMan way (not using MS-RPC).

Avoiding Critical PostScript Driver Settings on the Client

Printing works, but there are still problems. Most jobs print well, some do not print at all. Some jobs have problems with fonts, which do not look very good. Some jobs print fast and some are dead-slow. Many of these problems can be greatly reduced or even completely eliminated if you follow a few guidelines. Remember, if your print device is not PostScript-enabled, you are treating your Ghostscript installation on your CUPS host with the output your client driver settings produce. Treat it well:

  • Avoid the PostScript Output Option: Optimize for Speed setting. Use the Optimize for Portability instead (Adobe PostScript driver).

  • Don't use the Page Independence: NO setting. Instead, use Page Independence YES (CUPS PostScript Driver).

  • Recommended is the True Type Font Downloading Option: Native True Type over Automatic and Outline; you should by all means avoid Bitmap (Adobe PostScript Driver).

  • Choose True Type Font: Download as Softfont into Printer over the default Replace by Device Font (for exotic fonts, you may need to change it back to get a printout at all) (Adobe).

  • Sometimes you can choose PostScript Language Level: In case of problems try 2 instead of 3 (the latest ESP Ghostscript package handles Level 3 PostScript very well) (Adobe).

  • Say Yes to PostScript Error Handler (Adobe).

Installing PostScript Driver Files Manually Using rpcclient

Of course, you can run all the commands that are embedded into the cupsaddsmb convenience utility yourself, one by one, and hereby upload and prepare the driver files for future client downloads.

  1. Prepare Samba (A CUPS print queue with the name of the printer should be there. We are providing the driver now).

  2. Copy all files to [print$].

  3. Run rpcclient adddriver (for each client architecture you want to support).

  4. Run rpcclient setdriver.

We are going to do this now. First, read the man page on rpcclient to get a first idea. Look at all the printing related subcommands. enumprinters, enumdrivers, enumports, adddriver, setdriver are among the most interesting ones. rpcclient implements an important part of the MS-RPC protocol. You can use it to query (and command) a Windows NT (or 200x/XP) PC, too. MS-RPC is used by Windows clients, among other things, to benefit from the Point'n'Print features. Samba can now mimic this as well.

A Check of the rpcclient man Page

First let's check the rpcclient man page. Here are two relevant passages:

adddriver <arch> <config> Execute an AddPrinterDriver() RPC to install the printer driver information on the server. The driver files should already exist in the directory returned by getdriverdir. Possible values for arch are the same as those for the getdriverdir command. The config parameter is defined as follows:

Long Printer Name:\
Driver File Name:\
Data File Name:\
Config File Name:\
Help File Name:\
Language Monitor Name:\
Default Data Type:\
Comma Separated list of Files

Any empty fields should be enter as the string “NULL”.

Samba does not need to support the concept of Print Monitors since these only apply to local printers whose driver can make use of a bi-directional link for communication. This field should be “NULL”. On a remote NT print server, the Print Monitor for a driver must already be installed prior to adding the driver or else the RPC will fail.

setdriver <printername> <drivername> Execute a SetPrinter() command to update the printer driver associated with an installed printer. The printer driver must already be correctly installed on the print server.

See also the enumprinters and enumdrivers commands for obtaining a list of installed printers and drivers.

Understanding the rpcclient man Page

The exact format isn't made too clear by the man page, since you have to deal with some parameters containing spaces. Here is a better description for it. We have line-broken the command and indicated the breaks with “\”. Usually you would type the command in one line without the linebreaks:

 adddriver "Architecture" \
           "LongPrinterName:DriverFile:DataFile:ConfigFile:HelpFile:\
           LanguageMonitorFile:DataType:ListOfFiles,Comma-separated"

What the man pages denote as a simple <config> keyword, in reality consists of eight colon-separated fields. The last field may take multiple (in some very insane cases, even 20 different additional) files. This might sound confusing at first. What the man pages names the “LongPrinterName” in reality should be called the “Driver Name”. You can name it anything you want, as long as you use this name later in the rpcclient ... setdriver command. For practical reasons, many name the driver the same as the printer.

It isn't simple at all. I hear you asking: “How do I know which files are "Driver File”, “Data File”, “Config File”, “Help File” and “Language Monitor File" in each case?” For an answer, you may want to have a look at how a Windows NT box with a shared printer presents the files to us. Remember, that this whole procedure has to be developed by the Samba team by overhearing the traffic caused by Windows computers on the wire. We may as well turn to a Windows box now and access it from a UNIX workstation. We will query it with rpcclient to see what it tells us and try to understand the man page more clearly that we've read just now.

Producing an Example by Querying a Windows Box

We could run rpcclient with a getdriver or a getprinter subcommand (in level 3 verbosity) against it. Just sit down at a UNIX or Linux workstation with the Samba utilities installed, then type the following command:

root# rpcclient -U'user%secret' NT-SERVER -c 'getdriver printername 3'

From the result it should become clear which is which. Here is an example from my installation:

root# rpcclient -U'Danka%xxxx' W200xSERVER \
	-c'getdriver "DANKA InfoStream Virtual Printer" 3'
 cmd = getdriver "DANKA InfoStream Virtual Printer" 3

 [Windows NT x86]
 Printer Driver Info 3:
         Version: [2]
         Driver Name: [DANKA InfoStream]
         Architecture: [Windows NT x86]
         Driver Path: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\PSCRIPT.DLL]
         Datafile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\INFOSTRM.PPD]
         Configfile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\PSCRPTUI.DLL]
         Helpfile: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\PSCRIPT.HLP]
 
         Dependentfiles: []
         Dependentfiles: []
         Dependentfiles: []
         Dependentfiles: []
         Dependentfiles: []
         Dependentfiles: []
         Dependentfiles: []
 
         Monitorname: []
         Defaultdatatype: []

Some printer drivers list additional files under the label Dependentfiles and these would go into the last field ListOfFiles,Comma-separated. For the CUPS PostScript drivers, we do not need any (nor would we for the Adobe PostScript driver), therefore, the field will get a “NULL” entry.

Requirements for adddriver and setdriver to Succeed

>From the man page (and from the quoted output of cupsaddsmb above) it becomes clear that you need to have certain conditions in order to make the manual uploading and initializing of the driver files succeed. The two rpcclient subcommands (adddriver and setdriver) need to encounter the following preconditions to complete successfully:

  • You are connected as printer admin or root (this is not the “Printer Operators” group in NT, but the printer admin group as defined in the [global] section of smb.conf).

  • Copy all required driver files to \\SAMBA\print$\w32x86 and \\SAMBA\print$\win40 as appropriate. They will end up in the “0” respective “2” subdirectories later. For now, do not put them there, they'll be automatically used by the adddriver subcommand. (If you use smbclient to put the driver files into the share, note that you need to escape the “$”: smbclient //sambaserver/print\$ -U root.)

  • The user you're connecting as must be able to write to the [print$] share and create subdirectories.

  • The printer you are going to setup for the Windows clients needs to be installed in CUPS already.

  • The CUPS printer must be known to Samba, otherwise the setdriver subcommand fails with an NT_STATUS_UNSUCCESSFUL error. To check if the printer is known by Samba, you may use the enumprinters subcommand to rpcclient. A long-standing bug prevented a proper update of the printer list until every smbd process had received a SIGHUP or was restarted. Remember this in case you've created the CUPS printer just recently and encounter problems: try restarting Samba.

Manual Driver Installation in 15 Steps

We are going to install a printer driver now by manually executing all required commands. As this may seem a rather complicated process at first, we go through the procedure step by step, explaining every single action item as it comes up.

Procedure 19.1. Manual Driver Installation

  1. Install the printer on CUPS.

    root# lpadmin -p mysmbtstprn -v socket://10.160.51.131:9100 -E \
    			-P canonIR85.ppd
    

    This installs a printer with the name mysmbtstprn to the CUPS system. The printer is accessed via a socket (a.k.a. JetDirect or Direct TCP/IP) connection. You need to be root for this step.

  2. (Optional) Check if the printer is recognized by Samba.

    	root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
      | grep -C2 mysmbtstprn
    flags:[0x800000]
    name:[\\kde-bitshop\mysmbtstprn]
    description:[\\kde-bitshop\mysmbtstprn,,mysmbtstprn]
    comment:[mysmbtstprn]
    

    This should show the printer in the list. If not, stop and restart the Samba daemon (smbd), or send a HUP signal:

    root# kill -HUP `pidof smbd`
    

    Check again. Troubleshoot and repeat until successful. Note the “empty” field between the two commas in the “description” line. The driver name would appear here if there was one already. You need to know root's Samba password (as set by the smbpasswd command) for this step and most of the following steps. Alternately, you can authenticate as one of the users from the “write list” as defined in smb.conf for [print$].

  3. (Optional) Check if Samba knows a driver for the printer.

    root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
    			| grep driver 
    drivername:[]
    
    root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
    	| grep -C4 driv
    servername:[\\kde-bitshop]
    printername:[\\kde-bitshop\mysmbtstprn]
    sharename:[mysmbtstprn]
    portname:[Samba Printer Port]
    drivername:[]
    comment:[mysmbtstprn]
    location:[]
    sepfile:[]
    printprocessor:[winprint]
     
    root# rpcclient -U root%xxxx -c 'getdriver mysmbtstprn' localhost
     result was WERR_UNKNOWN_PRINTER_DRIVER
    
    

    None of the three commands shown above should show a driver. This step was done for the purpose of demonstrating this condition. An attempt to connect to the printer at this stage will prompt the message along the lines of: “The server does not have the required printer driver installed.

  4. Put all required driver files into Samba's [print$].

    root# smbclient //localhost/print\$ -U 'root%xxxx' \
    	-c 'cd W32X86; \
    	put /etc/cups/ppd/mysmbtstprn.ppd mysmbtstprn.PPD; \ 
    	put /usr/share/cups/drivers/cupsui.dll cupsui.dll; \
    	put /usr/share/cups/drivers/cupsdrvr.dll cupsdrvr.dll; \
    	put /usr/share/cups/drivers/cups.hlp cups.hlp'
    

    (This command should be entered in one long single line. Line-breaks and the line-end indicated by “\” have been inserted for readability reasons.) This step is required for the next one to succeed. It makes the driver files physically present in the [print$] share. However, clients would still not be able to install them, because Samba does not yet treat them as driver files. A client asking for the driver would still be presented with a “not installed here” message.

  5. Verify where the driver files are now.

    root# ls -l /etc/samba/drivers/W32X86/
    total 669
    drwxr-sr-x    2 root     ntadmin       532 May 25 23:08 2
    drwxr-sr-x    2 root     ntadmin       670 May 16 03:15 3
    -rwxr--r--    1 root     ntadmin     14234 May 25 23:21 cups.hlp
    -rwxr--r--    1 root     ntadmin    278380 May 25 23:21 cupsdrvr.dll
    -rwxr--r--    1 root     ntadmin    215848 May 25 23:21 cupsui.dll
    -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
    

    The driver files now are in the W32X86 architecture “root” of [print$].

  6. Tell Samba that these are driver files (adddriver).

    root# rpcclient -Uroot%xxxx -c `adddriver "Windows NT x86" \
    	"mydrivername:cupsdrvr.dll:mysmbtstprn.PPD: \
      cupsui.dll:cups.hlp:NULL:RAW:NULL" \
      localhost
    Printer Driver mydrivername successfully installed.
    

    You cannot repeat this step if it fails. It could fail even as a result of a simple typo. It will most likely have moved a part of the driver files into the “2” subdirectory. If this step fails, you need to go back to the fourth step and repeat it before you can try this one again. In this step, you need to choose a name for your driver. It is normally a good idea to use the same name as is used for the printer name; however, in big installations you may use this driver for a number of printers that obviously have different names, so the name of the driver is not fixed.

  7. Verify where the driver files are now.

    root# ls -l /etc/samba/drivers/W32X86/
    total 1
    drwxr-sr-x    2 root     ntadmin       532 May 25 23:22 2
    drwxr-sr-x    2 root     ntadmin       670 May 16 03:15 3
    
    root# ls -l /etc/samba/drivers/W32X86/2
    total 5039
    [....]
    -rwxr--r--    1 root     ntadmin     14234 May 25 23:21 cups.hlp
    -rwxr--r--    1 root     ntadmin    278380 May 13 13:53 cupsdrvr.dll
    -rwxr--r--    1 root     ntadmin    215848 May 13 13:53 cupsui.dll
    -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
    

    Notice how step 6 also moved the driver files to the appropriate subdirectory. Compare this with the situation after step 5.

  8. (Optional) Verify if Samba now recognizes the driver.

    root# rpcclient -Uroot%xxxx -c 'enumdrivers 3' \
    	localhost | grep -B2 -A5 mydrivername
    Printer Driver Info 3:
    Version: [2]
    Driver Name: [mydrivername]
    Architecture: [Windows NT x86]
    Driver Path: [\\kde-bitshop\print$\W32X86\2\cupsdrvr.dll]
    Datafile: [\\kde-bitshop\print$\W32X86\2\mysmbtstprn.PPD]
    Configfile: [\\kde-bitshop\print$\W32X86\2\cupsui.dll]
    Helpfile: [\\kde-bitshop\print$\W32X86\2\cups.hlp]
    

    Remember, this command greps for the name you chose for the driver in step 6. This command must succeed before you can proceed.

  9. Tell Samba which printer should use these driver files (setdriver).

    root# rpcclient -Uroot%xxxx -c 'setdriver mysmbtstprn mydrivername' \
    	localhost
    Successfully set mysmbtstprn to driver mydrivername
    

    Since you can bind any printername (print queue) to any driver, this is a convenient way to setup many queues that use the same driver. You do not need to repeat all the previous steps for the setdriver command to succeed. The only preconditions are: enumdrivers must find the driver and enumprinters must find the printer.

  10. (Optional) Verify if Samba has recognized this association.

    root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
      | grep driver
    drivername:[mydrivername]
     
    root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
      | grep -C4 driv
    servername:[\\kde-bitshop]
    printername:[\\kde-bitshop\mysmbtstprn]
    sharename:[mysmbtstprn]
    portname:[Done]
    drivername:[mydrivername]
    comment:[mysmbtstprn]
    location:[]
    sepfile:[]
    printprocessor:[winprint]
     
    root# rpcclient -U root%xxxx -c 'getdriver mysmbtstprn' localhost
    [Windows NT x86]
    Printer Driver Info 3:
         Version: [2]
         Driver Name: [mydrivername]
         Architecture: [Windows NT x86]
         Driver Path: [\\kde-bitshop\print$\W32X86\2\cupsdrvr.dll]
         Datafile: [\\kde-bitshop\print$\W32X86\2\mysmbtstprn.PPD]
         Configfile: [\\kde-bitshop\print$\W32X86\2\cupsui.dll]
         Helpfile: [\\kde-bitshop\print$\W32X86\2\cups.hlp]
         Monitorname: []
         Defaultdatatype: [RAW]
         Monitorname: []
         Defaultdatatype: [RAW]
     
    root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
    	| grep mysmbtstprn
         name:[\\kde-bitshop\mysmbtstprn]
         description:[\\kde-bitshop\mysmbtstprn,mydrivername,mysmbtstprn]
         comment:[mysmbtstprn]
    
    

    Compare these results with the ones from steps 2 and 3. Every one of these commands show the driver is installed. Even the enumprinters command now lists the driver on the “description” line.

  11. (Optional) Tickle the driver into a correct device mode.

    You certainly know how to install the driver on the client. In case you are not particularly familiar with Windows, here is a short recipe: Browse the Network Neighborhood, go to the Samba server, and look for the shares. You should see all shared Samba printers. Double-click on the one in question. The driver should get installed and the network connection set up. An alternate way is to open the Printers (and Faxes) folder, right-click on the printer in question and select Connect or Install. As a result, a new printer should have appeared in your client's local Printers (and Faxes) folder, named something like printersharename on Sambahostname.

    It is important that you execute this step as a Samba printer admin (as defined in smb.conf). Here is another method to do this on Windows XP. It uses a command line, which you may type into the “DOS box” (type root's smbpassword when prompted):

    C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry \
    	/in /n \\sambaserver\mysmbtstprn"
    

    Change any printer setting once (like changing portrait to landscape), click on Apply; change the setting back.

  12. Install the printer on a client (Point'n'Print).

    C:\> rundll32 printui.dll,PrintUIEntry /in /n “\\sambaserver\mysmbtstprn
    

    If it does not work it could be a permission problem with the [print$] share.

  13. (Optional) Print a test page.

    C:\> rundll32 printui.dll,PrintUIEntry /p /n "\\sambaserver\mysmbtstprn"
    

    Then hit [TAB] five times, [ENTER] twice, [TAB] once and [ENTER] again and march to the printer.

  14. (Recommended) Study the test page.

    Hmmm.... just kidding! By now you know everything about printer installations and you do not need to read a word. Just put it in a frame and bolt it to the wall with the heading "MY FIRST RPCCLIENT-INSTALLED PRINTER" why not just throw it away!

  15. (Obligatory) Enjoy. Jump. Celebrate your success.

    root# echo "Cheeeeerioooooo! Success..." >> /var/log/samba/log.smbd
    

Troubleshooting Revisited

The setdriver command will fail, if in Samba's mind the queue is not already there. You had promising messages about the:

 Printer Driver ABC successfully installed.

after the adddriver parts of the procedure? But you are also seeing a disappointing message like this one?

result was NT_STATUS_UNSUCCESSFUL

It is not good enough that you can see the queue in CUPS, using the lpstat -p ir85wm command. A bug in most recent versions of Samba prevents the proper update of the queuelist. The recognition of newly installed CUPS printers fails unless you restart Samba or send a HUP to all smbd processes. To verify if this is the reason why Samba does not execute the setdriver command successfully, check if Samba “sees” the printer:

root# rpcclient transmeta -N -U'root%xxxx' -c 'enumprinters 0'|grep ir85wm
        printername:[ir85wm]

An alternate command could be this:

root# rpcclient transmeta -N -U'root%secret' -c 'getprinter ir85wm' 
        cmd = getprinter ir85wm
        flags:[0x800000]
        name:[\\transmeta\ir85wm]
        description:[\\transmeta\ir85wm,ir85wm,DPD]
        comment:[CUPS PostScript-Treiber for Windows NT/200x/XP]

By the way, you can use these commands, plus a few more, of course, to install drivers on remote Windows NT print servers too!

The Printing *.tdb Files

Some mystery is associated with the series of files with a tdb suffix appearing in every Samba installation. They are connections.tdb, printing.tdb, share_info.tdb, ntdrivers.tdb, unexpected.tdb, brlock.tdb, locking.tdb, ntforms.tdb, messages.tdb , ntprinters.tdb, sessionid.tdb and secrets.tdb. What is their purpose?

Trivial Database Files

A Windows NT (print) server keeps track of all information needed to serve its duty toward its clients by storing entries in the Windows registry. Client queries are answered by reading from the registry, Administrator or user configuration settings that are saved by writing into the registry. Samba and UNIX obviously do not have such a Registry. Samba instead keeps track of all client related information in a series of *.tdb files. (TDB = Trivial Data Base). These are often located in /var/lib/samba/ or /var/lock/samba/. The printing related files are ntprinters.tdb, printing.tdb,ntforms.tdb and ntdrivers.tdb.

Binary Format

*.tdb files are not human readable. They are written in a binary format. “Why not ASCII?”, you may ask. “After all, ASCII configuration files are a good and proven tradition on UNIX.” The reason for this design decision by the Samba team is mainly performance. Samba needs to be fast; it runs a separate smbd process for each client connection, in some environments many thousands of them. Some of these smbds might need to write-access the same *.tdb file at the same time. The file format of Samba's *.tdb files allows for this provision. Many smbd processes may write to the same *.tdb file at the same time. This wouldn't be possible with pure ASCII files.

Losing *.tdb Files

It is very important that all *.tdb files remain consistent over all write and read accesses. However, it may happen that these files do get corrupted. (A kill -9 `pidof smbd' while a write access is in progress could do the damage as well as a power interruption, etc.). In cases of trouble, a deletion of the old printing-related *.tdb files may be the only option. After that you need to re-create all print-related setup or you have made a backup of the *.tdb files in time.

Using tdbbackup

Samba ships with a little utility that helps the root user of your system to backup your *.tdb files. If you run it with no argument, it prints a usage message:

root# tdbbackup
 Usage: tdbbackup [options] <fname...>
 
 Version:3.0a
   -h            this help message
   -s suffix     set the backup suffix
   -v            verify mode (restore if corrupt)

Here is how I backed up my printing.tdb file:

root# ls
.              browse.dat     locking.tdb     ntdrivers.tdb printing.tdb
..             share_info.tdb connections.tdb messages.tdb  ntforms.tdb
printing.tdbkp unexpected.tdb brlock.tdb      gmon.out      namelist.debug  
ntprinters.tdb sessionid.tdb
 
root# tdbbackup -s .bak printing.tdb
 printing.tdb : 135 records
 
root# ls -l printing.tdb*
 -rw-------    1 root     root        40960 May  2 03:44 printing.tdb
 -rw-------    1 root     root        40960 May  2 03:44 printing.tdb.bak

CUPS Print Drivers from Linuxprinting.org

CUPS ships with good support for HP LaserJet-type printers. You can install the generic driver as follows:

root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -m laserjet.ppd

The -m switch will retrieve the laserjet.ppd from the standard repository for not-yet-installed-PPDs, which CUPS typically stores in /usr/share/cups/model. Alternately, you may use -P /path/to/your.ppd.

The generic laserjet.ppd, however, does not support every special option for every LaserJet-compatible model. It constitutes a sort of “least common denominator” of all the models. If for some reason you must pay for the commercially available ESP Print Pro drivers, your first move should be to consult the database on http://www.linuxprinting.org/printer_list.cgi. Linuxprinting.org has excellent recommendations about which driver is best used for each printer. Its database is kept current by the tireless work of Till Kamppeter from MandrakeSoft, who is also the principal author of the foomatic-rip utility.

Note

The former cupsomatic concept is now being replaced by the new successor, a much more powerful foomatic-rip. cupsomatic is no longer maintained. Here is the new URL to the Foomatic-3.0 database: http://www.linuxprinting.org/driver_list.cgi. If you upgrade to foomatic-rip, remember to also upgrade to the new-style PPDs for your Foomatic-driven printers. foomatic-rip will not work with PPDs generated for the old cupsomatic. The new-style PPDs are 100% compliant to the Adobe PPD specification. They are also intended to be used by Samba and the cupsaddsmb utility, to provide the driver files for the Windows clients!

foomatic-rip and Foomatic Explained

Nowadays, most Linux distributions rely on the utilities of Linuxprinting.org to create their printing-related software (which, by the way, works on all UNIXes and on Mac OS X or Darwin, too). It is not known as well as it should be, that it also has a very end-user-friendly interface that allows for an easy update of drivers and PPDs for all supported models, all spoolers, all operating systems, and all package formats (because there is none). Its history goes back a few years.

Recently, Foomatic has achieved the astonishing milestone of 1000 listed printer models. Linuxprinting.org keeps all the important facts about printer drivers, supported models and which options are available for the various driver/printer combinations in its Foomatic database. Currently there are 245 drivers in the database. Many drivers support various models, and many models may be driven by different drivers its your choice!

690 “Perfect” Printers

At present, there are 690 devices dubbed as working perfectly, 181 mostly, 96 partially, and 46 are paperweights. Keeping in mind that most of these are non-PostScript models (PostScript printers are automatically supported by CUPS to perfection, by using their own manufacturer-provided Windows-PPD), and that a multifunctional device never qualifies as working perfectly if it does not also scan and copy and fax under GNU/Linux then this is a truly astonishing achievement! Three years ago the number was not more than 500, and Linux or UNIX printing at the time wasn't anywhere near the quality it is today.

How the Printing HOWTO Started It All

A few years ago Grant Taylor started it all. The roots of today's Linuxprinting.org are in the first Linux Printing HOWTO that he authored. As a side-project to this document, which served many Linux users and admins to guide their first steps in this complicated and delicate setup (to a scientist, printing is “applying a structured deposition of distinct patterns of ink or toner particles on paper substrates”, he started to build in a little Postgres database with information about the hardware and driver zoo that made up Linux printing of the time. This database became the core component of today's Foomatic collection of tools and data. In the meantime, it has moved to an XML representation of the data.

Foomatic's Strange Name

Why the funny name?” you ask. When it really took off, around spring 2000, CUPS was far less popular than today, and most systems used LPD, LPRng or even PDQ to print. CUPS shipped with a few generic drivers (good for a few hundred different printer models). These didn't support many device-specific options. CUPS also shipped with its own built-in rasterization filter (pstoraster, derived from Ghostscript). On the other hand, CUPS provided brilliant support for controlling all printer options through standardized and well-defined PPD files (PostScript Printers Description files). Plus, CUPS was designed to be easily extensible.

Taylor already had in his database a respectable compilation of facts about many more printers and the Ghostscript “drivers” they run with. His idea, to generate PPDs from the database information and use them to make standard Ghostscript filters work within CUPS, proved to work very well. It also killed several birds with one stone:

  • It made all current and future Ghostscript filter developments available for CUPS.

  • It made available a lot of additional printer models to CUPS users (because often the traditional Ghostscript way of printing was the only one available).

  • It gave all the advanced CUPS options (Web interface, GUI driver configurations) to users wanting (or needing) to use Ghostscript filters.

cupsomatic, pdqomatic, lpdomatic, directomatic

CUPS worked through a quickly-hacked up filter script named cupsomatic. cupsomatic ran the printfile through Ghostscript, constructing automatically the rather complicated command line needed. It just needed to be copied into the CUPS system to make it work. To configure the way cupsomatic controls the Ghostscript rendering process, it needs a CUPS-PPD. This PPD is generated directly from the contents of the database. For CUPS and the respective printer/filter combo, another Perl script named CUPS-O-Matic did the PPD generation. After that was working, Taylor implemented within a few days a similar thing for two other spoolers. Names chosen for the config-generator scripts were PDQ-O-Matic (for PDQ) and LPD-O-Matic (for you guessed it LPD); the configuration here didn't use PPDs but other spooler-specific files.

From late summer of that year, Till Kamppeter started to put work into the database. Kamppeter had been newly employed by MandrakeSoft to convert its printing system over to CUPS, after they had seen his FLTK-based XPP (a GUI frontend to the CUPS lp-command). He added a huge amount of new information and new printers. He also developed the support for other spoolers, like PPR (via ppromatic), GNUlpr and LPRng (both via an extended lpdomatic) and spoolerless printing (directomatic).

So, to answer your question: “Foomatic” is the general name for all the overlapping code and data behind the “*omatic” scripts. Foomatic, up to versions 2.0.x, required (ugly) Perl data structures attached to Linuxprinting.org PPDs for CUPS. It had a different “*omatic” script for every spooler, as well as different printer configuration files.

The Grand Unification Achieved

This has all changed in Foomatic versions 2.9 (beta) and released as “stable” 3.0. It has now achieved the convergence of all *omatic scripts and is called the foomatic-rip. This single script is the unification of the previously different spooler-specific *omatic scripts. foomatic-rip is used by all the different spoolers alike and because it can read PPDs (both the original PostScript printer PPDs and the Linuxprinting.org-generated ones), all of a sudden all supported spoolers can have the power of PPDs at their disposal. Users only need to plug foomatic-rip into their system. For users there is improved media type and source support paper sizes and trays are easier to configure.

Also, the New Generation of Linuxprinting.org PPDs no longer contains Perl data structures. If you are a distro maintainer and have used the previous version of Foomatic, you may want to give the new one a spin, but remember to generate a new-version set of PPDs via the new foomatic-db-engine! Individual users just need to generate a single new PPD specific to their model by following the steps outlined in the Foomatic tutorial or in this chapter. This new development is truly amazing.

foomatic-rip is a very clever wrapper around the need to run Ghostscript with a different syntax, options, device selections, and/or filters for each different printer or spooler. At the same time it can read the PPD associated with a print queue and modify the print job according to the user selections. Together with this comes the 100% compliance of the new Foomatic PPDs with the Adobe spec. Some innovative features of the Foomatic concept may surprise users. It will support custom paper sizes for many printers and will support printing on media drawn from different paper trays within the same job (in both cases, even where there is no support for this from Windows-based vendor printer drivers).

Driver Development Outside

Most driver development itself does not happen within Linuxprinting.org. Drivers are written by independent maintainers. Linuxprinting.org just pools all the information and stores it in its database. In addition, it also provides the Foomatic glue to integrate the many drivers into any modern (or legacy) printing system known to the world.

Speaking of the different driver development groups, most of the work is currently done in three projects. These are:

  • Omni a free software project by IBM that tries to convert their printer driver knowledge from good-ol' OS/2 times into a modern, modular, universal driver architecture for Linux/UNIX (still beta). This currently supports 437 models.

  • HPIJS a free software project by HP to provide the support for their own range of models (very mature, printing in most cases is perfect and provides true photo quality). This currently supports 369 models.

  • Gimp-Print a free software effort, started by Michael Sweet (also lead developer for CUPS), now directed by Robert Krawitz, which has achieved an amazing level of photo print quality (many Epson users swear that its quality is better than the vendor drivers provided by Epson for the Microsoft platforms). This currently supports 522 models.

Forums, Downloads, Tutorials, Howtos also for Mac OS X and Commercial UNIX

Linuxprinting.org today is the one-stop shop to download printer drivers. Look for printer information and tutorials or solve printing problems in its popular forums. This forum it's not just for GNU/Linux users, but admins of commercial UNIX systems are also going there, and the relatively new Mac OS X forum has turned out to be one of the most frequented forums after only a few weeks.

Linuxprinting.org and the Foomatic driver wrappers around Ghostscript are now a standard toolchain for printing on all the important distros. Most of them also have CUPS underneath. While in recent years most printer data had been added by Kamppeter (who works at Mandrake), many additional contributions came from engineers with SuSE, RedHat, Connectiva, Debian, and others. Vendor-neutrality is an important goal of the Foomatic project.

Note

Till Kamppeter from MandrakeSoft is doing an excellent job in his spare time to maintain Linuxprinting.org and Foomatic. So if you use it often, please send him a note showing your appreciation.

Foomatic Database-Generated PPDs

The Foomatic database is an amazing piece of ingenuity in itself. Not only does it keep the printer and driver information, but it is organized in a way that it can generate PPD files on the fly from its internal XML-based datasets. While these PPDs are modelled to the Adobe specification of PostScript Printer Descriptions (PPDs), the Linuxprinting.org/Foomatic-PPDs do not normally drive PostScript printers. They are used to describe all the bells and whistles you could ring or blow on an Epson Stylus inkjet, or a HP Photosmart, or what-have-you. The main trick is one little additional line, not envisaged by the PPD specification, starting with the *cupsFilter keyword. It tells the CUPS daemon how to proceed with the PostScript print file (old-style Foomatic-PPDs named the cupsomatic filter script, while the new-style PPDs are now call foomatic-rip). This filter script calls Ghostscript on the host system (the recommended variant is ESP Ghostscript) to do the rendering work. foomatic-rip knows which filter or internal device setting it should ask from Ghostscript to convert the PostScript printjob into a raster format ready for the target device. This usage of PPDs to describe the options of non-PS printers was the invention of the CUPS developers. The rest is easy. GUI tools (like KDE's marvelous kprinter, or the GNOME gtklp, xpp and the CUPS Web interface) read the PPD as well and use this information to present the available settings to the user as an intuitive menu selection.

foomatic-rip and Foomatic-PPD Download and Installation

Here are the steps to install a foomatic-rip driven LaserJet 4 Plus-compatible printer in CUPS (note that recent distributions of SuSE, UnitedLinux and Mandrake may ship with a complete package of Foomatic-PPDs plus the foomatic-rip utility. Going directly to Linuxprinting.org ensures that you get the latest driver/PPD files):

  • Open your browser at the Linuxprinting.org printer listpage.

  • Check the complete list of printers in the database..

  • Select your model and click on the link.

  • You'll arrive at a page listing all drivers working with this model (for all printers, there will always be one recommended driver. Try this one first).

  • In our case (HP LaserJet 4 Plus), we'll arrive at the default driver for the HP-LaserJet 4 Plus.

  • The recommended driver is ljet4.

  • Several links are provided here. You should visit them all if you are not familiar with the Linuxprinting.org database.

  • There is a link to the database page for the ljet4. On the driver's page, you'll find important and detailed information about how to use that driver within the various available spoolers.

  • Another link may lead you to the homepage of the driver author or the driver.

  • Important links are the ones that provide hints with setup instructions for CUPS, PDQ, LPD, LPRng and GNUlpr) as well as PPR or “spooler-lessprinting.

  • You can view the PPD in your browser through this link: http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=1

  • Most importantly, you can also generate and download the PPD.

  • The PPD contains all the information needed to use our model and the driver; once installed, this works transparently for the user. Later you'll only need to choose resolution, paper size, and so on from the Web-based menu, or from the print dialog GUI, or from the command line.

  • If you ended up on the drivers page you can choose to use the “PPD-O-Matic” online PPD generator program.

  • Select the exact model and check either Download or Display PPD file and click Generate PPD file.

  • If you save the PPD file from the browser view, please do not use cut and paste (since it could possibly damage line endings and tabs, which makes the PPD likely to fail its duty), but use Save as... in your browser's menu. (It is best to use the Download option directly from the Web page).

  • Another interesting part on each driver page is the Show execution details button. If you select your printer model and click on that button, a complete Ghostscript command line will be displayed, enumerating all options available for that combination of driver and printer model. This is a great way to “learn Ghostscript by doing”. It is also an excellent cheat sheet for all experienced users who need to re-construct a good command line for that damn printing script, but can't remember the exact syntax.

  • Some time during your visit to Linuxprinting.org, save the PPD to a suitable place on your harddisk, say /path/to/my-printer.ppd (if you prefer to install your printers with the help of the CUPS Web interface, save the PPD to the /usr/share/cups/model/ path and restart cupsd).

  • Then install the printer with a suitable command line, like this:

    root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E \
    	-P path/to/my-printer.ppd
    
  • For all the new-style “Foomatic-PPDs” from Linuxprinting.org, you also need a special CUPS filter named foomatic-rip.

  • The foomatic-rip Perlscript itself also makes some interesting reading because it is well documented by Kamppeter's inline comments (even non-Perl hackers will learn quite a bit about printing by reading it).

  • Save foomatic-rip either directly in /usr/lib/cups/filter/foomatic-rip or somewhere in your $PATH (and remember to make it world-executable). Again, do not save by copy and paste but use the appropriate link or the Save as... menu item in your browser.

  • If you save foomatic-rip in your $PATH, create a symlink:

    root# cd /usr/lib/cups/filter/ ; ln -s `which foomatic-rip'
    

    CUPS will discover this new available filter at startup after restarting cupsd.

Once you print to a print queue set up with the Foomatic-PPD, CUPS will insert the appropriate commands and comments into the resulting PostScript jobfile. foomatic-rip is able to read and act upon these and uses some specially encoded Foomatic comments embedded in the jobfile. These in turn are used to construct (transparently for you, the user) the complicated Ghostscript command line telling the printer driver exactly how the resulting raster data should look and which printer commands to embed into the data stream. You need:

  • A “foomatic+something” PPD but this is not enough to print with CUPS (it is only one important component).

  • The foomatic-rip filter script (Perl) in /usr/lib/cups/filters/.

  • Perl to make foomatic-rip run.

  • Ghostscript (because it is doing the main work, controlled by the PPD/foomatic-rip combo) to produce the raster data fit for your printer model's consumption.

  • Ghostscript must (depending on the driver/model) contain support for a certain device representing the selected driver for your model (as shown by gs -h).

  • foomatic-rip needs a new version of PPDs (PPD versions produced for cupsomatic do not work with foomatic-rip).

Page Accounting with CUPS

Often there are questions regarding print quotas where Samba users (that is, Windows clients) should not be able to print beyond a certain number of pages or data volume per day, week or month. This feature is dependent on the real print subsystem you're using. Samba's part is always to receive the job files from the clients (filtered or unfiltered) and hand it over to this printing subsystem.

Of course one could hack things with one's own scripts. But then there is CUPS. CUPS supports quotas that can be based on the size of jobs or on the number of pages or both, and span any time period you want.

Setting Up Quotas

This is an example command of how root would set a print quota in CUPS, assuming an existing printer named “quotaprinter”:

root# lpadmin -p quotaprinter -o job-quota-period=604800 \
	-o job-k-limit=1024 -o job-page-limit=100

This would limit every single user to print 100 pages or 1024 KB of data (whichever comes first) within the last 604,800 seconds ( = 1 week).

Correct and Incorrect Accounting

For CUPS to count correctly, the printfile needs to pass the CUPS pstops filter, otherwise it uses a dummy count of “one”. Some print files do not pass it (e.g., image files) but then those are mostly one- page jobs anyway. This also means that proprietary drivers for the target printer running on the client computers and CUPS/Samba, which then spool these files as “raw” (i.e., leaving them untouched, not filtering them), will be counted as one-pagers too!

You need to send PostScript from the clients (i.e., run a PostScript driver there) to have the chance to get accounting done. If the printer is a non-PostScript model, you need to let CUPS do the job to convert the file to a print-ready format for the target printer. This is currently working for about a thousand different printer models. Linuxprinting has a driver list.

Adobe and CUPS PostScript Drivers for Windows Clients

Before CUPS 1.1.16, your only option was to use the Adobe PostScript Driver on the Windows clients. The output of this driver was not always passed through the pstops filter on the CUPS/Samba side, and therefore was not counted correctly (the reason is that it often, depending on the PPD being used, wrote a PJL-header in front of the real PostScript which caused CUPS to skip pstops and go directly to the pstoraster stage).

From CUPS 1.1.16 onward, you can use the CUPS PostScript Driver for Windows NT/200x/XP clients (which is tagged in the download area of http://www.cups.org/ as the cups-samba-1.1.16.tar.gz package). It does not work for Windows 9x/ME clients, but it guarantees:

  • To not write a PJL-header.

  • To still read and support all PJL-options named in the driver PPD with its own means.

  • That the file will pass through the pstops filter on the CUPS/Samba server.

  • To page-count correctly the print file.

You can read more about the setup of this combination in the man page for cupsaddsmb (which is only present with CUPS installed, and only current from CUPS 1.1.16).

The page_log File Syntax

These are the items CUPS logs in the page_log for every page of a job:

  • Printer name

  • User name

  • Job ID

  • Time of printing

  • The page number

  • The number of copies

  • A billing information string (optional)

  • The host that sent the job (included since version 1.1.19)

Here is an extract of my CUPS server's page_log file to illustrate the format and included items:

tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 1 3 #marketing 10.160.50.13
tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 2 3 #marketing 10.160.50.13
tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 3 3 #marketing 10.160.50.13
tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 4 3 #marketing 10.160.50.13
Dig9110 boss 402 [22/Apr/2003:10:33:22 +0100] 1 440 finance-dep 10.160.51.33

This was job ID 401, printed on tec_IS2027 by user kurt, a 64-page job printed in three copies and billed to #marketing, sent from IP address 10.160.50.13. The next job had ID 402, was sent by user boss from IP address 10.160.51.33, printed from one page 440 copies and is set to be billed to finance-dep.

Possible Shortcomings

What flaws or shortcomings are there with this quota system?

  • The ones named above (wrongly logged job in case of printer hardware failure, and so on).

  • In reality, CUPS counts the job pages that are being processed in software (that is, going through the RIP) rather than the physical sheets successfully leaving the printing device. Thus if there is a jam while printing the fifth sheet out of a thousand and the job is aborted by the printer, the page count will still show the figure of a thousand for that job.

  • All quotas are the same for all users (no flexibility to give the boss a higher quota than the clerk) and no support for groups.

  • No means to read out the current balance or the “used-up” number of current quota.

  • A user having used up 99 sheets of a 100 quota will still be able to send and print a thousand sheet job.

  • A user being denied a job because of a filled-up quota does not get a meaningful error message from CUPS other than “client-error-not-possible”.

Future Developments

This is the best system currently available, and there are huge improvements under development for CUPS 1.2:

  • Page counting will go into the backends (these talk directly to the printer and will increase the count in sync with the actual printing process; thus, a jam at the fifth sheet will lead to a stop in the counting).

  • Quotas will be handled more flexibly.

  • Probably there will be support for users to inquire about their accounts in advance.

  • Probably there will be support for some other tools around this topic.

Additional Material

A printer queue with no PPD associated to it is a “raw” printer and all files will go directly there as received by the spooler. The exceptions are file types application/octet-stream that need passthrough feature enabled. “Raw” queues do not do any filtering at all, they hand the file directly to the CUPS backend. This backend is responsible for sending the data to the device (as in the “device URI” notation: lpd://, socket://, smb://, ipp://, http://, parallel:/, serial:/, usb:/, and so on).

cupsomatic/Foomatic are not native CUPS drivers and they do not ship with CUPS. They are a third party add-on developed at Linuxprinting.org. As such, they are a brilliant hack to make all models (driven by Ghostscript drivers/filters in traditional spoolers) also work via CUPS, with the same (good or bad!) quality as in these other spoolers. cupsomatic is only a vehicle to execute a Ghostscript commandline at that stage in the CUPS filtering chain, where normally the native CUPS pstoraster filter would kick in. cupsomatic bypasses pstoraster, kidnaps the printfile from CUPS away and redirects it to go through Ghostscript. CUPS accepts this, because the associated cupsomatic/foomatic-PPD specifies:

  *cupsFilter:  "application/vnd.cups-postscript 0 cupsomatic"

This line persuades CUPS to hand the file to cupsomatic, once it has successfully converted it to the MIME type application/vnd.cups-postscript. This conversion will not happen for Jobs arriving from Windows that are auto-typed application/octet-stream, with the according changes in /etc/cups/mime.types in place.

CUPS is widely configurable and flexible, even regarding its filtering mechanism. Another workaround in some situations would be to have in /etc/cups/mime.types entries as follows:

 application/postscript           application/vnd.cups-raw  0  -
 application/vnd.cups-postscript  application/vnd.cups-raw  0  -

This would prevent all PostScript files from being filtered (rather, they will through the virtual nullfilter denoted with “-”). This could only be useful for PS printers. If you want to print PS code on non-PS printers (provided they support ASCII text printing), an entry as follows could be useful:

 */*           application/vnd.cups-raw  0  -

and would effectively send all files to the backend without further processing.

You could have the following entry:

application/vnd.cups-postscript application/vnd.cups-raw 0 \
	my_PJL_stripping_filter

You will need to write a my_PJL_stripping_filter (which could be a shell script) that parses the PostScript and removes the unwanted PJL. This needs to conform to CUPS filter design (mainly, receive and pass the parameters printername, job-id, username, jobtitle, copies, print options and possibly the filename). It is installed as world executable into /usr/lib/cups/filters/ and is called by CUPS if it encounters a MIME type application/vnd.cups-postscript.

CUPS can handle -o job-hold-until=indefinite. This keeps the job in the queue on hold. It will only be printed upon manual release by the printer operator. This is a requirement in many central reproduction departments, where a few operators manage the jobs of hundreds of users on some big machine, where no user is allowed to have direct access (such as when the operators often need to load the proper paper type before running the 10,000 page job requested by marketing for the mailing, and so on).

Auto-Deletion or Preservation of CUPS Spool Files

Samba print files pass through two spool directories. One is the incoming directory managed by Samba, (set in the path = /var/spool/samba directive in the [printers] section of smb.conf). The other is the spool directory of your UNIX print subsystem. For CUPS it is normally /var/spool/cups/, as set by the cupsd.conf directive RequestRoot /var/spool/cups.

CUPS Configuration Settings Explained

Some important parameter settings in the CUPS configuration file cupsd.conf are:

PreserveJobHistory Yes

This keeps some details of jobs in cupsd's mind (well it keeps the c12345, c12346, and so on, files in the CUPS spool directory, which do a similar job as the old-fashioned BSD-LPD control files). This is set to “Yes” as a default.

PreserveJobFiles Yes

This keeps the job files themselves in cupsd's mind (it keeps the d12345, d12346 etc. files in the CUPS spool directory). This is set to “No” as the CUPS default.

MaxJobs 500

This directive controls the maximum number of jobs that are kept in memory. Once the number of jobs reaches the limit, the oldest completed job is automatically purged from the system to make room for the new one. If all of the known jobs are still pending or active, then the new job will be rejected. Setting the maximum to 0 disables this functionality. The default setting is 0.

(There are also additional settings for MaxJobsPerUser and MaxJobsPerPrinter...)

Pre-Conditions

For everything to work as announced, you need to have three things:

  • A Samba-smbd that is compiled against libcups (check on Linux by running ldd `which smbd').

  • A Samba-smb.conf setting of printing = cups.

  • Another Samba-smb.conf setting of printcap = cups.

Note

In this case, all other manually set printing-related commands (like print command, lpq command, lprm command, lppause command or lpresume command) are ignored and they should normally have no influence whatsoever on your printing.

Manual Configuration

If you want to do things manually, replace the printing = cups by printing = bsd. Then your manually set commands may work (I haven't tested this), and a print command = lp -d %P %s; rm %s" may do what you need.

Printing from CUPS to Windows Attached Printers

>From time to time the question arises, how can you print to a Windows attached printer from Samba? Normally the local connection from Windows host to printer would be done by USB or parallel cable, but this does not matter to Samba. From here only an SMB connection needs to be opened to the Windows host. Of course, this printer must be shared first. As you have learned by now, CUPS uses backends to talk to printers and other servers. To talk to Windows shared printers, you need to use the smb (surprise, surprise!) backend. Check if this is in the CUPS backend directory. This usually resides in /usr/lib/cups/backend/. You need to find an smb file there. It should be a symlink to smbspool and the file must exist and be executable:

root# ls -l /usr/lib/cups/backend/
total 253
drwxr-xr-x    3 root   root     720 Apr 30 19:04 .
drwxr-xr-x    6 root   root     125 Dec 19 17:13 ..
-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 canon
-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 epson
lrwxrwxrwx    1 root   root       3 Apr 17 22:50 http -> ipp
-rwxr-xr-x    1 root   root   17316 Apr 17 22:50 ipp
-rwxr-xr-x    1 root   root   15420 Apr 20 17:01 lpd
-rwxr-xr-x    1 root   root    8656 Apr 20 17:01 parallel
-rwxr-xr-x    1 root   root    2162 Mar 31 23:15 pdfdistiller
lrwxrwxrwx    1 root   root      25 Apr 30 19:04 ptal -> /usr/sbin/ptal-cups
-rwxr-xr-x    1 root   root    6284 Apr 20 17:01 scsi
lrwxrwxrwx    1 root   root      17 Apr  2 03:11 smb -> /usr/bin/smbspool
-rwxr-xr-x    1 root   root    7912 Apr 20 17:01 socket
-rwxr-xr-x    1 root   root    9012 Apr 20 17:01 usb

root# ls -l `which smbspool`
-rwxr-xr-x    1 root   root  563245 Dec 28 14:49 /usr/bin/smbspool

If this symlink does not exist, create it:

root# ln -s `which smbspool` /usr/lib/cups/backend/smb

smbspool has been written by Mike Sweet from the CUPS folks. It is included and ships with Samba. It may also be used with print subsystems other than CUPS, to spool jobs to Windows printer shares. To set up printer winprinter on CUPS, you need to have a driver for it. Essentially this means to convert the print data on the CUPS/Samba host to a format that the printer can digest (the Windows host is unable to convert any files you may send). This also means you should be able to print to the printer if it were hooked directly at your Samba/CUPS host. For troubleshooting purposes, this is what you should do to determine if that part of the process chain is in order. Then proceed to fix the network connection/authentication to the Windows host, and so on.

To install a printer with the smb backend on CUPS, use this command:

root# lpadmin -p winprinter -v smb://WINDOWSNETBIOSNAME/printersharename \
  -P /path/to/PPD

The PPD must be able to direct CUPS to generate the print data for the target model. For PostScript printers, just use the PPD that would be used with the Windows NT PostScript driver. But what can you do if the printer is only accessible with a password? Or if the printer's host is part of another workgroup? This is provided for: You can include the required parameters as part of the smb:// device-URI like this:

  • smb://WORKGROUP/WINDOWSNETBIOSNAME/printersharename
  • smb://username:password@WORKGROUP/WINDOWSNETBIOSNAME/printersharename
  • smb://username:password@WINDOWSNETBIOSNAME/printersharename

Note that the device-URI will be visible in the process list of the Samba server (e.g., when someone uses the ps -aux command on Linux), even if the username and passwords are sanitized before they get written into the log files. So this is an inherently insecure option, however, it is the only one. Don't use it if you want to protect your passwords. Better share the printer in a way that does not require a password! Printing will only work if you have a working netbios name resolution up and running. Note that this is a feature of CUPS and you do not necessarily need to have smbd running.

More CUPS-Filtering Chains

The following diagrams reveal how CUPS handles print jobs.

Figure 19.17. Filtering chain 1.

Filtering chain 1.

Figure 19.18. Filtering chain with cupsomatic

Filtering chain with cupsomatic

Common Errors

Windows 9x/ME Client Can't Install Driver

For Windows 9x/ME, clients require the printer names to be eight characters (or “8 plus 3 chars suffix”) max; otherwise, the driver files will not get transferred when you want to download them from Samba.

cupsaddsmb” Keeps Asking for Root Password in Never-ending Loop

Have you security = user? Have you used smbpasswd to give root a Samba account? You can do two things: open another terminal and execute smbpasswd -a root to create the account and continue entering the password into the first terminal. Or break out of the loop by pressing ENTER twice (without trying to type a password).

cupsaddsmb” Errors

The use of “cupsaddsmb” gives “No PPD file for printer...” Message While PPD File Is Present. What might the problem be?

Have you enabled printer sharing on CUPS? This means: Do you have a <Location /printers>....</Location> section in CUPS server's cupsd.conf that does not deny access to the host you run “cupsaddsmb” from? It could be an issue if you use cupsaddsmb remotely, or if you use it with a -h parameter: cupsaddsmb -H sambaserver -h cupsserver -v printername.

Is your TempDir directive in cupsd.conf set to a valid value and is it writeable?

Client Can't Connect to Samba Printer

Use smbstatus to check which user you are from Samba's point of view. Do you have the privileges to write into the [print$] share?

New Account Reconnection from Windows 200x/XP Troubles

Once you are connected as the wrong user (for example, as nobody, which often occurs if you have map to guest = bad user), Windows Explorer will not accept an attempt to connect again as a different user. There will not be any byte transfered on the wire to Samba, but still you'll see a stupid error message that makes you think Samba has denied access. Use smbstatus to check for active connections. Kill the PIDs. You still can't re-connect and you get the dreaded You can't connect with a second account from the same machine message, as soon as you are trying. And you do not see any single byte arriving at Samba (see logs; use “ethereal”) indicating a renewed connection attempt. Shut all Explorer Windows. This makes Windows forget what it has cached in its memory as established connections. Then reconnect as the right user. The best method is to use a DOS terminal window and first do net use z: \\GANDALF\print$ /user:root. Check with smbstatus that you are connected under a different account. Now open the Printers folder (on the Samba server in the Network Neighborhood), right-click on the printer in question and select Connect...

Avoid Being Connected to the Samba Server as the Wrong User

You see per smbstatus that you are connected as user nobody; while you want to be root or printeradmin. This is probably due to map to guest = bad user, which silently connects you under the guest account when you gave (maybe by accident) an incorrect username. Remove map to guest, if you want to prevent this.

Upgrading to CUPS Drivers from Adobe Drivers

This information came from a mailinglist posting regarding problems experienced when upgrading from Adobe drivers to CUPS drivers on Microsoft Windows NT/200x/XP Clients.

First delete all old Adobe-using printers. Then delete all old Adobe drivers. (On Windows 200x/XP, right-click in the background of Printers folder, select Server Properties..., select tab Drivers and delete here).

Can't Use “cupsaddsmb” on Samba Server Which Is a PDC

Do you use the “naked” root user name? Try to do it this way: cupsaddsmb -U DOMAINNAME\\root -v printername> (note the two backslashes: the first one is required to “escape” the second one).

Deleted Windows 200x Printer Driver Is Still Shown

Deleting a printer on the client will not delete the driver too (to verify, right-click on the white background of the Printers folder, select Server Properties and click on the Drivers tab). These same old drivers will be re-used when you try to install a printer with the same name. If you want to update to a new driver, delete the old ones first. Deletion is only possible if no other printer uses the same driver.

Windows 200x/XP "Local Security Policies"

Local Security Policies may not allow the installation of unsigned drivers. “Local Security Policies” may not allow the installation of printer drivers at all.

Administrator Cannot Install Printers for All Local Users

Windows XP handles SMB printers on a “per-user” basis. This means every user needs to install the printer himself. To have a printer available for everybody, you might want to use the built-in IPP client capabilities of WinXP. Add a printer with the print path of http://cupsserver:631/printers/printername. We're still looking into this one. Maybe a logon script could automatically install printers for all users.

Print Change Notify Functions on NT-clients

For print change, notify functions on NT++ clients. These need to run the Server service first (renamed to File & Print Sharing for MS Networks in XP).

WinXP-SP1

WinXP-SP1 introduced a Point and Print Restriction Policy (this restriction does not apply to “Administrator” or “Power User” groups of users). In Group Policy Object Editor, go to User Configuration -> Administrative Templates -> Control Panel -> Printers. The policy is automatically set to Enabled and the Users can only Point and Print to machines in their Forest . You probably need to change it to Disabled or Users can only Point and Print to these servers to make driver downloads from Samba possible.

Print Options for All Users Can't Be Set on Windows 200x/XP

How are you doing it? I bet the wrong way (it is not easy to find out, though). There are three different ways to bring you to a dialog that seems to set everything. All three dialogs look the same, yet only one of them does what you intend. You need to be Administrator or Print Administrator to do this for all users. Here is how I do in on XP:

  1. The first wrong way:

    1. Open the Printers folder.

    2. Right-click on the printer (remoteprinter on cupshost) and select in context menu Printing Preferences...

    3. Look at this dialog closely and remember what it looks like.

  2. The second wrong way:

    1. Open the Printers folder.

    2. Right-click on the printer (remoteprinter on cupshost) and select the context menu Properties.

    3. Click on the General tab.

    4. Click on the button Printing Preferences...

    5. A new dialog opens. Keep this dialog open and go back to the parent dialog.

  3. The third, and the correct way:

    1. Open the Printers folder.

    2. Click on the Advanced tab. (If everything is “grayed out,” then you are not logged in as a user with enough privileges).

    3. Click on the Printing Defaults... button.

    4. On any of the two new tabs, click on the Advanced... button.

    5. A new dialog opens. Compare this one to the other identical looking one from “B.5” or A.3".

Do you see any difference? I don't either. However, only the last one, which you arrived at with steps “C.1.-6.”, will save any settings permanently and be the defaults for new users. If you want all clients to get the same defaults, you need to conduct these steps as Administrator (printer admin in smb.conf) before a client downloads the driver (the clients can later set their own per-user defaults by following the procedures A or B above).

Most Common Blunders in Driver Settings on Windows Clients

Don't use Optimize for Speed, but use Optimize for Portability instead (Adobe PS Driver). Don't use Page Independence: No: always settle with Page Independence: Yes (Microsoft PS Driver and CUPS PS Driver for Windows NT/200x/XP). If there are problems with fonts, use Download as Softfont into printer (Adobe PS Driver). For TrueType Download Options choose Outline. Use PostScript Level 2, if you are having trouble with a non-PS printer and if there is a choice.

cupsaddsmb Does Not Work with Newly Installed Printer

Symptom: The last command of cupsaddsmb does not complete successfully: cmd = setdriver printername printername result was NT_STATUS_UNSUCCESSFUL then possibly the printer was not yet recognized by Samba. Did it show up in Network Neighborhood? Did it show up i n rpcclient hostname -c `enumprinters'? Restart smbd (or send a kill -HUP to all processes listed by smbstatus and try again.

Permissions on /var/spool/samba/ Get Reset After Each Reboot

Have you ever by accident set the CUPS spool directory to the same location? (RequestRoot /var/spool/samba/ in cupsd.conf or the other way round: /var/spool/cups/ is set as path> in the [printers] section). These must be different. Set RequestRoot /var/spool/cups/ in cupsd.conf and path = /var/spool/samba in the [printers] section of smb.conf. Otherwise cupsd will sanitize permissions to its spool directory with each restart and printing will not work reliably.

Print Queue Called “lp” Mis-handles Print Jobs

In this case a print queue called “lp” intermittently swallows jobs and spits out completely different ones from what was sent.

It is a bad idea to name any printer “lp”. This is the traditional UNIX name for the default printer. CUPS may be set up to do an automatic creation of Implicit Classes. This means, to group all printers with the same name to a pool of devices, and load-balancing the jobs across them in a round-robin fashion. Chances are high that someone else has a printer named “lp” too. You may receive his jobs and send your own to his device unwittingly. To have tight control over the printer names, set BrowseShortNames No. It will present any printer as printername@cupshost and then gives you better control over what may happen in a large networked environment.

Location of Adobe PostScript Driver Files for “cupsaddsmb

Use smbclient to connect to any Windows box with a shared PostScript printer: smbclient //windowsbox/print\$ -U guest. You can navigate to the W32X86/2 subdir to mget ADOBE* and other files or to WIN40/0 to do the same. Another option is to download the *.exe packaged files from the Adobe Web site.

Overview of the CUPS Printing Processes

A complete overview of the CUPS printing processes can be found in .

Figure 19.19. CUPS printing overview.

CUPS printing overview.


[4] http://www.cups.org/cups-help.html

Chapter 20. Stackable VFS modules

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Tim Potter

Samba Team

Simo Sorce

original vfs_skel README

Alexander Bokovoy

original vfs_netatalk docs

Stefan Metzmacher

Update for multiple modules

Features and Benefits

Since Samba-3, there is support for stackable VFS (Virtual File System) modules. Samba passes each request to access the UNIX file system through the loaded VFS modules. This chapter covers all the modules that come with the Samba source and references to some external modules.

Discussion

If not supplied with your platform distribution binary Samba package you may have problems compiling these modules, as shared libraries are compiled and linked in different ways on different systems. They currently have been tested against GNU/Linux and IRIX.

To use the VFS modules, create a share similar to the one below. The important parameter is the vfs objects parameter where you can list one or more VFS modules by name. For example, to log all access to files and put deleted files in a recycle bin, see .

Example 20.1. smb.conf with VFS modules

[audit]
comment = Audited /data directory
path = /data
vfs objects = audit recycle
writeable = yes
browseable = yes

The modules are used in the order in which they are specified.

Samba will attempt to load modules from the /lib directory in the root directory of the Samba installation (usually /usr/lib/samba/vfs or /usr/local/samba/lib/vfs ).

Some modules can be used twice for the same share. This can be done using a configuration similar to the one shown in .

Example 20.2. smb.conf with multiple VFS modules

[test]
comment = VFS TEST
path = /data
writeable = yes
browseable = yes
vfs objects = example:example1 example example:test
example1: parameter = 1
example: parameter = 5
test: parameter = 7

Included Modules

audit

A simple module to audit file access to the syslog facility. The following operations are logged:

  • share
  • connect/disconnect
  • directory opens/create/remove
  • file open/close/rename/unlink/chmod

extd_audit

This module is identical with the audit module above except that it sends audit logs to both syslog as well as the smbd log files. The log level for this module is set in the smb.conf file.

Valid settings and the information that will be recorded are shown in .

Table 20.1. Extended Auditing Log Information

Log LevelLog Details - File and Directory Operations
0Creation / Deletion
1Create / Delete / Rename / Permission Changes
2Create / Delete / Rename / Perm Change / Open / Close

fake_perms

This module was created to allow Roaming Profile files and directories to be set (on the Samba server under UNIX) as read only. This module will, if installed on the Profiles share, report to the client that the Profile files and directories are writable. This satisfies the client even though the files will never be overwritten as the client logs out or shuts down.

recycle

A Recycle Bin-like module. Where used, unlink calls will be intercepted and files moved to the recycle directory instead of being deleted. This gives the same effect as the Recycle Bin on Windows computers.

The Recycle Bin will not appear in Windows Explorer views of the network file system (share) nor on any mapped drive. Instead, a directory called .recycle will be automatically created when the first file is deleted. Users can recover files from the .recycle directory. If the recycle:keeptree has been specified, deleted files will be found in a path identical with that from which the file was deleted.

Supported options for the recycle module are as follow:

recycle:repository

Relative path of the directory where deleted files should be moved.

recycle:keeptree

Specifies whether the directory structure should be kept or if the files in the directory that is being deleted should be kept seperately in the recycle bin.

recycle:versions

If this option is set, two files with the same name that are deleted will both be kept in the recycle bin. Newer deleted versions of a file will be called “Copy #x of filename”.

recycle:touch

Specifies whether a file's access date should be touched when the file is moved to the recycle bin.

recycle:maxsize

Files that are larger than the number of bytes specified by this parameter will not be put into the recycle bin.

recycle:exclude

List of files that should not be put into the recycle bin when deleted, but deleted in the regular way.

recycle:exclude_dir

Contains a list of directories. When files from these directories are deleted, they are not put into the recycle bin but are deleted in the regular way.

recycle:noversions

Opposite of recycle:versions. If both options are specified, this one takes precedence.

netatalk

A netatalk module will ease co-existence of Samba and netatalk file sharing services.

Advantages compared to the old netatalk module:

  • Does not care about creating .AppleDouble forks, just keeps them in sync.

  • If a share in smb.conf does not contain .AppleDouble item in hide or veto list, it will be added automatically.

VFS Modules Available Elsewhere

This section contains a listing of various other VFS modules that have been posted but do not currently reside in the Samba CVS tree for one reason or another (e.g., it is easy for the maintainer to have his or her own CVS tree).

No statements about the stability or functionality of any module should be implied due to its presence here.

DatabaseFS

URL: http://www.css.tayloru.edu/~elorimer/databasefs/index.php

By Eric Lorimer.

I have created a VFS module that implements a fairly complete read-only filesystem. It presents information from a database as a filesystem in a modular and generic way to allow different databases to be used (originally designed for organizing MP3s under directories such as “Artists,” “Song Keywords,” and so on. I have since easily applied it to a student roster database.) The directory structure is stored in the database itself and the module makes no assumptions about the database structure beyond the table it requires to run.

Any feedback would be appreciated: comments, suggestions, patches, and so on. If nothing else, hopefully it might prove useful for someone else who wishes to create a virtual filesystem.

vscan

URL: http://www.openantivirus.org/

samba-vscan is a proof-of-concept module for Samba, which uses the VFS (virtual file system) features of Samba 2.2.x/3.0 alphaX. Of course, Samba has to be compiled with VFS support. samba-vscan supports various virus scanners and is maintained by Rainer Link.

Chapter 21. Winbind: Use of Domain Accounts

Tim Potter

Andrew Tridgell

Samba Team

Naag Mummaneni

Notes for Solaris

John Trostel

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

27 June 2002

Features and Benefits

Integration of UNIX and Microsoft Windows NT through a unified logon has been considered a “holy grail” in heterogeneous computing environments for a long time.

There is one other facility without which UNIX and Microsoft Windows network interoperability would suffer greatly. It is imperative that there be a mechanism for sharing files across UNIX systems and to be able to assign domain user and group ownerships with integrity.

winbind is a component of the Samba suite of programs that solves the unified logon problem. Winbind uses a UNIX implementation of Microsoft RPC calls, Pluggable Authentication Modules, and the Name Service Switch to allow Windows NT domain users to appear and operate as UNIX users on a UNIX machine. This chapter describes the Winbind system, explaining the functionality it provides, how it is configured, and how it works internally.

Winbind provides three separate functions:

  • Authentication of user credentials (via PAM).

  • Identity resolution (via NSS).

  • Winbind maintains a database called winbind_idmap.tdb in which it stores mappings between UNIX UIDs / GIDs and NT SIDs. This mapping is used only for users and groups that do not have a local UID/GID. It stored the UID/GID allocated from the idmap uid/gid range that it has mapped to the NT SID. If idmap backend has been specified as ldapsam:url then instead of using a local mapping Winbind will obtain this information from the LDAP database.

Note

If winbindd is not running, smbd (which calls winbindd) will fall back to using purely local information from /etc/passwd and /etc/group and no dynamic mapping will be used.

Introduction

It is well known that UNIX and Microsoft Windows NT have different models for representing user and group information and use different technologies for implementing them. This fact has made it difficult to integrate the two systems in a satisfactory manner.

One common solution in use today has been to create identically named user accounts on both the UNIX and Windows systems and use the Samba suite of programs to provide file and print services between the two. This solution is far from perfect, however, as adding and deleting users on both sets of machines becomes a chore and two sets of passwords are required both of which can lead to synchronization problems between the UNIX and Windows systems and confusion for users.

We divide the unified logon problem for UNIX machines into three smaller problems:

  • Obtaining Windows NT user and group information.

  • Authenticating Windows NT users.

  • Password changing for Windows NT users.

Ideally, a prospective solution to the unified logon problem would satisfy all the above components without duplication of information on the UNIX machines and without creating additional tasks for the system administrator when maintaining users and groups on either system. The Winbind system provides a simple and elegant solution to all three components of the unified logon problem.

What Winbind Provides

Winbind unifies UNIX and Windows NT account management by allowing a UNIX box to become a full member of an NT domain. Once this is done the UNIX box will see NT users and groups as if they were “native” UNIX users and groups, allowing the NT domain to be used in much the same manner that NIS+ is used within UNIX-only environments.

The end result is that whenever any program on the UNIX machine asks the operating system to lookup a user or group name, the query will be resolved by asking the NT Domain Controller for the specified domain to do the lookup. Because Winbind hooks into the operating system at a low level (via the NSS name resolution modules in the C library), this redirection to the NT Domain Controller is completely transparent.

Users on the UNIX machine can then use NT user and group names as they would “native” UNIX names. They can chown files so they are owned by NT domain users or even login to the UNIX machine and run a UNIX X-Window session as a domain user.

The only obvious indication that Winbind is being used is that user and group names take the form DOMAIN\user and DOMAIN\group. This is necessary as it allows Winbind to determine that redirection to a Domain Controller is wanted for a particular lookup and which trusted domain is being referenced.

Additionally, Winbind provides an authentication service that hooks into the Pluggable Authentication Modules (PAM) system to provide authentication via an NT domain to any PAM-enabled applications. This capability solves the problem of synchronizing passwords between systems since all passwords are stored in a single location (on the Domain Controller).

Target Uses

Winbind is targeted at organizations that have an existing NT-based domain infrastructure into which they wish to put UNIX workstations or servers. Winbind will allow these organizations to deploy UNIX workstations without having to maintain a separate account infrastructure. This greatly simplifies the administrative overhead of deploying UNIX workstations into an NT-based organization.

Another interesting way in which we expect Winbind to be used is as a central part of UNIX-based appliances. Appliances that provide file and print services to Microsoft-based networks will be able to use Winbind to provide seamless integration of the appliance into the domain.

How Winbind Works

The Winbind system is designed around a client/server architecture. A long running winbindd daemon listens on a UNIX domain socket waiting for requests to arrive. These requests are generated by the NSS and PAM clients and is processed sequentially.

The technologies used to implement Winbind are described in detail below.

Microsoft Remote Procedure Calls

Over the last few years, efforts have been underway by various Samba Team members to decode various aspects of the Microsoft Remote Procedure Call (MSRPC) system. This system is used for most network-related operations between Windows NT machines including remote management, user authentication and print spooling. Although initially this work was done to aid the implementation of Primary Domain Controller (PDC) functionality in Samba, it has also yielded a body of code that can be used for other purposes.

Winbind uses various MSRPC calls to enumerate domain users and groups and to obtain detailed information about individual users or groups. Other MSRPC calls can be used to authenticate NT domain users and to change user passwords. By directly querying a Windows PDC for user and group information, Winbind maps the NT account information onto UNIX user and group names.

Microsoft Active Directory Services

Since late 2001, Samba has gained the ability to interact with Microsoft Windows 2000 using its “Native Mode” protocols, rather than the NT4 RPC services. Using LDAP and Kerberos, a Domain Member running Winbind can enumerate users and groups in exactly the same way as a Windows 200x client would, and in so doing provide a much more efficient and effective Winbind implementation.

Name Service Switch

The Name Service Switch, or NSS, is a feature that is present in many UNIX operating systems. It allows system information such as hostnames, mail aliases and user information to be resolved from different sources. For example, a standalone UNIX workstation may resolve system information from a series of flat files stored on the local filesystem. A networked workstation may first attempt to resolve system information from local files, and then consult an NIS database for user information or a DNS server for hostname information.

The NSS application programming interface allows Winbind to present itself as a source of system information when resolving UNIX usernames and groups. Winbind uses this interface, and information obtained from a Windows NT server using MSRPC calls to provide a new source of account enumeration. Using standard UNIX library calls, one can enumerate the users and groups on a UNIX machine running Winbind and see all users and groups in a NT domain plus any trusted domain as though they were local users and groups.

The primary control file for NSS is /etc/nsswitch.conf. When a UNIX application makes a request to do a lookup, the C library looks in /etc/nsswitch.conf for a line that matches the service type being requested, for example the “passwd” service type is used when user or group names are looked up. This config line specifies which implementations of that service should be tried and in what order. If the passwd config line is:

		passwd: files example
		

then the C library will first load a module called /lib/libnss_files.so followed by the module /lib/libnss_example.so. The C library will dynamically load each of these modules in turn and call resolver functions within the modules to try to resolve the request. Once the request is resolved, the C library returns the result to the application.

This NSS interface provides an easy way for Winbind to hook into the operating system. All that needs to be done is to put libnss_winbind.so in /lib/ then add “winbind” into /etc/nsswitch.conf at the appropriate place. The C library will then call Winbind to resolve user and group names.

Pluggable Authentication Modules

Pluggable Authentication Modules, also known as PAM, is a system for abstracting authentication and authorization technologies. With a PAM module it is possible to specify different authentication methods for different system applications without having to recompile these applications. PAM is also useful for implementing a particular policy for authorization. For example, a system administrator may only allow console logins from users stored in the local password file but only allow users resolved from a NIS database to log in over the network.

Winbind uses the authentication management and password management PAM interface to integrate Windows NT users into a UNIX system. This allows Windows NT users to log in to a UNIX machine and be authenticated against a suitable Primary Domain Controller. These users can also change their passwords and have this change take effect directly on the Primary Domain Controller.

PAM is configured by providing control files in the directory /etc/pam.d/ for each of the services that require authentication. When an authentication request is made by an application, the PAM code in the C library looks up this control file to determine what modules to load to do the authentication check and in what order. This interface makes adding a new authentication service for Winbind very easy. All that needs to be done is that the pam_winbind.so module is copied to /lib/security/ and the PAM control files for relevant services are updated to allow authentication via Winbind. See the PAM documentation in for more information.

User and Group ID Allocation

When a user or group is created under Windows NT/200x it is allocated a numerical relative identifier (RID). This is slightly different from UNIX which has a range of numbers that are used to identify users, and the same range in which to identify groups. It is Winbind's job to convert RIDs to UNIX ID numbers and vice versa. When Winbind is configured, it is given part of the UNIX user ID space and a part of the UNIX group ID space in which to store Windows NT users and groups. If a Windows NT user is resolved for the first time, it is allocated the next UNIX ID from the range. The same process applies for Windows NT groups. Over time, Winbind will have mapped all Windows NT users and groups to UNIX user IDs and group IDs.

The results of this mapping are stored persistently in an ID mapping database held in a tdb database). This ensures that RIDs are mapped to UNIX IDs in a consistent way.

Result Caching

An active system can generate a lot of user and group name lookups. To reduce the network cost of these lookups, Winbind uses a caching scheme based on the SAM sequence number supplied by NT Domain Controllers. User or group information returned by a PDC is cached by Winbind along with a sequence number also returned by the PDC. This sequence number is incremented by Windows NT whenever any user or group information is modified. If a cached entry has expired, the sequence number is requested from the PDC and compared against the sequence number of the cached entry. If the sequence numbers do not match, then the cached information is discarded and up-to-date information is requested directly from the PDC.

Installation and Configuration

Introduction

This section describes the procedures used to get Winbind up and running. Winbind is capable of providing access and authentication control for Windows Domain users through an NT or Windows 200x PDC for regular services, such as telnet and ftp, as well for Samba services.

  • Why should I do this?

    This allows the Samba administrator to rely on the authentication mechanisms on the Windows NT/200x PDC for the authentication of Domain Members. Windows NT/200x users no longer need to have separate accounts on the Samba server.

  • Who should be reading this document?

    This document is designed for system administrators. If you are implementing Samba on a file server and wish to (fairly easily) integrate existing Windows NT/200x users from your PDC onto the Samba server, this document is for you.

Requirements

If you have a Samba configuration file that you are currently using, BACK IT UP! If your system already uses PAM, back up the /etc/pam.d directory contents! If you haven't already made a boot disk, MAKE ONE NOW!

Messing with the PAM configuration files can make it nearly impossible to log in to your machine. That's why you want to be able to boot back into your machine in single user mode and restore your /etc/pam.d back to the original state they were in if you get frustrated with the way things are going.

The latest version of Samba-3 includes a functioning winbindd daemon. Please refer to the main Samba Web page or, better yet, your closest Samba mirror site for instructions on downloading the source code.

To allow domain users the ability to access Samba shares and files, as well as potentially other services provided by your Samba machine, PAM must be set up properly on your machine. In order to compile the Winbind modules, you should have at least the PAM development libraries installed on your system. Please refer the PAM web site http://www.kernel.org/pub/linux/libs/pam/.

Testing Things Out

Before starting, it is probably best to kill off all the Samba-related daemons running on your server. Kill off all smbd, nmbd, and winbindd processes that may be running. To use PAM, make sure that you have the standard PAM package that supplies the /etc/pam.d directory structure, including the PAM modules that are used by PAM-aware services, several pam libraries, and the /usr/doc and /usr/man entries for pam. Winbind built better in Samba if the pam-devel package is also installed. This package includes the header files needed to compile PAM-aware applications.

Configure nsswitch.conf and the Winbind Libraries on Linux and Solaris

PAM is a standard component of most current generation UNIX/Linux systems. Unfortunately, few systems install the pam-devel libraries that are needed to build PAM-enabled Samba. Additionally, Samba-3 may auto-install the Winbind files into their correct locations on your system, so before you get too far down the track be sure to check if the following configuration is really necessary. You may only need to configure /etc/nsswitch.conf.

The libraries needed to run the winbindd daemon through nsswitch need to be copied to their proper locations:

root# cp ../samba/source/nsswitch/libnss_winbind.so /lib

I also found it necessary to make the following symbolic link:

root# ln -s /lib/libnss_winbind.so /lib/libnss_winbind.so.2

And, in the case of Sun Solaris:

root# ln -s /usr/lib/libnss_winbind.so /usr/lib/libnss_winbind.so.1
root# ln -s /usr/lib/libnss_winbind.so /usr/lib/nss_winbind.so.1
root# ln -s /usr/lib/libnss_winbind.so /usr/lib/nss_winbind.so.2

Now, as root you need to edit /etc/nsswitch.conf to allow user and group entries to be visible from the winbindd daemon. My /etc/nsswitch.conf file look like this after editing:

	passwd:     files winbind
	shadow:     files 
	group:      files winbind

The libraries needed by the winbindd daemon will be automatically entered into the ldconfig cache the next time your system reboots, but it is faster (and you do not need to reboot) if you do it manually:

root# /sbin/ldconfig -v | grep winbind

This makes libnss_winbind available to winbindd and echos back a check to you.

NSS Winbind on AIX

(This section is only for those running AIX.)

The Winbind AIX identification module gets built as libnss_winbind.so in the nsswitch directory of the Samba source. This file can be copied to /usr/lib/security, and the AIX naming convention would indicate that it should be named WINBIND. A stanza like the following:

WINBIND:
        program = /usr/lib/security/WINBIND
        options = authonly

can then be added to /usr/lib/security/methods.cfg. This module only supports identification, but there have been success reports using the standard Winbind PAM module for authentication. Use caution configuring loadable authentication modules since you can make it impossible to logon to the system. More information about the AIX authentication module API can be found at “Kernel Extensions and Device Support Programming Concepts for AIX in Chapter 18(John, there is no section like this in 18). Loadable Authentication Module Programming Interface and more information on administering the modules can be found at System Management Guide: Operating System and Devices.

Configure smb.conf

Several parameters are needed in the smb.conf file to control the behavior of winbindd. These are described in more detail in the winbindd(8) man page. My smb.conf file, as shown in , was modified to include the necessary entries in the [global] section.

Example 21.1. smb.conf for Winbind set-up

[global]
# separate domain and username with '+', like DOMAIN+username
winbind separator = +
# use uids from 10000 to 20000 for domain users
idmap uid = 10000-20000
# use gids from 10000 to 20000 for domain groups
winbind gid = 10000-20000
# allow enumeration of winbind users and groups
winbind enum users = yes
winbind enum groups = yes
# give winbind users a real shell (only needed if they have telnet access)
template homedir = /home/winnt/%D/%U
template shell = /bin/bash

Join the Samba Server to the PDC Domain

Enter the following command to make the Samba server join the PDC domain, where DOMAIN is the name of your Windows domain and Administrator is a domain user who has administrative privileges in the domain.

root# /usr/local/samba/bin/net rpc join -S PDC -U Administrator

The proper response to the command should be: “Joined the domain DOMAIN” where DOMAIN is your DOMAIN name.

Starting and Testing the winbindd Daemon

Eventually, you will want to modify your Samba startup script to automatically invoke the winbindd daemon when the other parts of Samba start, but it is possible to test out just the Winbind portion first. To start up Winbind services, enter the following command as root:

root# /usr/local/samba/bin/winbindd

Note

The above assumes that Samba has been installed in the /usr/local/samba directory tree. You may need to search for the location of Samba files if this is not the location of winbindd on your system.

Winbindd can now also run in “dual daemon modei”. This will make it run as two processes. The first will answer all requests from the cache, thus making responses to clients faster. The other will update the cache for the query that the first has just responded. The advantage of this is that responses stay accurate and are faster. You can enable dual daemon mode by adding -B to the commandline:

root# /usr/local/samba/bin/winbindd -B

I'm always paranoid and like to make sure the daemon is really running.

root# ps -ae | grep winbindd

This command should produce output like this, if the daemon is running you would expect to see a report something like this:

3025 ?        00:00:00 winbindd

Now, for the real test, try to get some information about the users on your PDC:

root# /usr/local/samba/bin/wbinfo -u

This should echo back a list of users on your Windows users on your PDC. For example, I get the following response:

	CEO+Administrator
	CEO+burdell
	CEO+Guest
	CEO+jt-ad
	CEO+krbtgt
	CEO+TsInternetUser

Obviously, I have named my domain “CEO” and my winbind separator is “+”.

You can do the same sort of thing to get group information from the PDC:

root# /usr/local/samba/bin/wbinfo -g
	CEO+Domain Admins
	CEO+Domain Users
	CEO+Domain Guests
	CEO+Domain Computers
	CEO+Domain Controllers
	CEO+Cert Publishers
	CEO+Schema Admins
	CEO+Enterprise Admins
	CEO+Group Policy Creator Owners

The function getent can now be used to get unified lists of both local and PDC users and groups. Try the following command:

root# getent passwd

You should get a list that looks like your /etc/passwd list followed by the domain users with their new UIDs, GIDs, home directories and default shells.

The same thing can be done for groups with the command:

root# getent group

Fix the init.d Startup Scripts

Linux

The winbindd daemon needs to start up after the smbd and nmbd daemons are running. To accomplish this task, you need to modify the startup scripts of your system. They are located at /etc/init.d/smb in Red Hat Linux and they are located in /etc/init.d/samba in Debian Linux. Edit your script to add commands to invoke this daemon in the proper sequence. My startup script starts up smbd, nmbd, and winbindd from the /usr/local/samba/bin directory directly. The start function in the script looks like this:

start() {
        KIND="SMB"
        echo -n $"Starting $KIND services: "
        daemon /usr/local/samba/bin/smbd $SMBDOPTIONS
        RETVAL=$?
        echo
        KIND="NMB"
        echo -n $"Starting $KIND services: "
        daemon /usr/local/samba/bin/nmbd $NMBDOPTIONS
        RETVAL2=$?
        echo
        KIND="Winbind"
        echo -n $"Starting $KIND services: "
        daemon /usr/local/samba/bin/winbindd
        RETVAL3=$?
        echo
        [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 -a $RETVAL3 -eq 0 ] && \
		touch /var/lock/subsys/smb || RETVAL=1
        return $RETVAL
}

If you would like to run winbindd in dual daemon mode, replace the line :

        daemon /usr/local/samba/bin/winbindd

in the example above with:

        daemon /usr/local/samba/bin/winbindd -B

.

The stop function has a corresponding entry to shut down the services and looks like this:

stop() {
        KIND="SMB"
        echo -n $"Shutting down $KIND services: "
        killproc smbd
        RETVAL=$?
        echo
        KIND="NMB"
        echo -n $"Shutting down $KIND services: "
        killproc nmbd
        RETVAL2=$?
        echo
        KIND="Winbind"
        echo -n $"Shutting down $KIND services: "
        killproc winbindd
        RETVAL3=$?
        [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 -a $RETVAL3 -eq 0 ] && \
		 rm -f /var/lock/subsys/smb
        echo ""
        return $RETVAL
}
Solaris

Winbind does not work on Solaris 9, see for details.

On Solaris, you need to modify the /etc/init.d/samba.server startup script. It usually only starts smbd and nmbd but should now start winbindd, too. If you have Samba installed in /usr/local/samba/bin, the file could contains something like this:

	##
	## samba.server
	##

	if [ ! -d /usr/bin ]
	then                    # /usr not mounted
		exit
	fi

	killproc() {            # kill the named process(es)
		pid=`/usr/bin/ps -e |
		     /usr/bin/grep -w $1 |
		     /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`
		[ "$pid" != "" ] && kill $pid
	}
	 
	# Start/stop processes required for Samba server

	case "$1" in

	'start')
	#
	# Edit these lines to suit your installation (paths, workgroup, host)
	#
	echo Starting SMBD
	   /usr/local/samba/bin/smbd -D -s \
		/usr/local/samba/smb.conf

	echo Starting NMBD
	   /usr/local/samba/bin/nmbd -D -l \
		/usr/local/samba/var/log -s /usr/local/samba/smb.conf

	echo Starting Winbind Daemon
	   /usr/local/samba/bin/winbindd
	   ;;

	'stop')
	   killproc nmbd
	   killproc smbd
	   killproc winbindd
	   ;;

	*)
	   echo "Usage: /etc/init.d/samba.server { start | stop }"
	   ;;
	esac

Again, if you would like to run Samba in dual daemon mode, replace:

	/usr/local/samba/bin/winbindd

in the script above with:

	/usr/local/samba/bin/winbindd -B

Restarting

If you restart the smbd, nmbd, and winbindd daemons at this point, you should be able to connect to the Samba server as a Domain Member just as if you were a local user.

Configure Winbind and PAM

If you have made it this far, you know that winbindd and Samba are working together. If you want to use Winbind to provide authentication for other services, keep reading. The PAM configuration files need to be altered in this step. (Did you remember to make backups of your original /etc/pam.d files? If not, do it now.)

You will need a PAM module to use winbindd with these other services. This module will be compiled in the ../source/nsswitch directory by invoking the command:

root# make nsswitch/pam_winbind.so

from the ../source directory. The pam_winbind.so file should be copied to the location of your other PAM security modules. On my RedHat system, this was the /lib/security directory. On Solaris, the PAM security modules reside in /usr/lib/security.

root# cp ../samba/source/nsswitch/pam_winbind.so /lib/security

Linux/FreeBSD-specific PAM configuration

The /etc/pam.d/samba file does not need to be changed. I just left this file as it was:

	auth    required        /lib/security/pam_stack.so service=system-auth
	account required        /lib/security/pam_stack.so service=system-auth

The other services that I modified to allow the use of Winbind as an authentication service were the normal login on the console (or a terminal session), telnet logins, and ftp service. In order to enable these services, you may first need to change the entries in /etc/xinetd.d (or /etc/inetd.conf). Red Hat Linux 7.1 and later uses the new xinetd.d structure, in this case you need to change the lines in /etc/xinetd.d/telnet and /etc/xinetd.d/wu-ftp from

	enable = no

to:

	enable = yes

For ftp services to work properly, you will also need to either have individual directories for the domain users already present on the server, or change the home directory template to a general directory for all domain users. These can be easily set using the smb.conf global entry template homedir.

The /etc/pam.d/ftp file can be changed to allow Winbind ftp access in a manner similar to the samba file. My /etc/pam.d/ftp file was changed to look like this:

auth       required     /lib/security/pam_listfile.so item=user sense=deny \
	 file=/etc/ftpusers onerr=succeed
auth       sufficient   /lib/security/pam_winbind.so
auth       required     /lib/security/pam_stack.so service=system-auth
auth       required     /lib/security/pam_shells.so
account    sufficient   /lib/security/pam_winbind.so
account    required     /lib/security/pam_stack.so service=system-auth
session    required     /lib/security/pam_stack.so service=system-auth

The /etc/pam.d/login file can be changed nearly the same way. It now looks like this:

auth       required     /lib/security/pam_securetty.so
auth       sufficient   /lib/security/pam_winbind.so
auth       sufficient   /lib/security/pam_UNIX.so use_first_pass
auth       required     /lib/security/pam_stack.so service=system-auth
auth       required     /lib/security/pam_nologin.so
account    sufficient   /lib/security/pam_winbind.so
account    required     /lib/security/pam_stack.so service=system-auth
password   required     /lib/security/pam_stack.so service=system-auth
session    required     /lib/security/pam_stack.so service=system-auth
session    optional     /lib/security/pam_console.so

In this case, I added the

auth sufficient /lib/security/pam_winbind.so

lines as before, but also added the

required pam_securetty.so

above it, to disallow root logins over the network. I also added a

sufficient /lib/security/pam_unix.so use_first_pass

line after the winbind.so line to get rid of annoying double prompts for passwords.

Solaris-specific configuration

The /etc/pam.conf needs to be changed. I changed this file so my Domain users can logon both locally as well as telnet. The following are the changes that I made. You can customize the pam.conf file as per your requirements, but be sure of those changes because in the worst case it will leave your system nearly impossible to boot.

#
#ident "@(#)pam.conf 1.14 99/09/16 SMI"
#
# Copyright (c) 1996-1999, Sun Microsystems, Inc.
# All Rights Reserved.
#
# PAM configuration
#
# Authentication management
#
login   auth required   /usr/lib/security/pam_winbind.so
login auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass 
login auth required  /usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass 
#
rlogin  auth sufficient /usr/lib/security/pam_winbind.so
rlogin  auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1
rlogin auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
#
dtlogin auth sufficient /usr/lib/security/pam_winbind.so
dtlogin auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
#
rsh auth required /usr/lib/security/$ISA/pam_rhosts_auth.so.1
other   auth sufficient /usr/lib/security/pam_winbind.so
other auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
#
# Account management
#
login   account sufficient      /usr/lib/security/pam_winbind.so
login account requisite /usr/lib/security/$ISA/pam_roles.so.1 
login account required /usr/lib/security/$ISA/pam_UNIX.so.1 
#
dtlogin account sufficient      /usr/lib/security/pam_winbind.so
dtlogin account requisite /usr/lib/security/$ISA/pam_roles.so.1 
dtlogin account required /usr/lib/security/$ISA/pam_UNIX.so.1 
#
other   account sufficient      /usr/lib/security/pam_winbind.so
other account requisite /usr/lib/security/$ISA/pam_roles.so.1 
other account required /usr/lib/security/$ISA/pam_UNIX.so.1 
#
# Session management
#
other session required /usr/lib/security/$ISA/pam_UNIX.so.1 
#
# Password management
#
#other   password sufficient     /usr/lib/security/pam_winbind.so
other password required /usr/lib/security/$ISA/pam_UNIX.so.1 
dtsession auth required /usr/lib/security/$ISA/pam_UNIX.so.1
#
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#
#rlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
#login auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
#dtlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
#other auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
#dtlogin account optional /usr/lib/security/$ISA/pam_krb5.so.1
#other account optional /usr/lib/security/$ISA/pam_krb5.so.1
#other session optional /usr/lib/security/$ISA/pam_krb5.so.1
#other password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass

I also added a try_first_pass line after the winbind.so line to get rid of annoying double prompts for passwords.

Now restart your Samba and try connecting through your application that you configured in the pam.conf.

Conclusion

The Winbind system, through the use of the Name Service Switch, Pluggable Authentication Modules, and appropriate Microsoft RPC calls have allowed us to provide seamless integration of Microsoft Windows NT domain users on a UNIX system. The result is a great reduction in the administrative cost of running a mixed UNIX and NT network.

Common Errors

Winbind has a number of limitations in its current released version that we hope to overcome in future releases:

  • Winbind is currently only available for the Linux, Solaris, AIX, and IRIX operating systems, although ports to other operating systems are certainly possible. For such ports to be feasible, we require the C library of the target operating system to support the Name Service Switch and Pluggable Authentication Modules systems. This is becoming more common as NSS and PAM gain support among UNIX vendors.

  • The mappings of Windows NT RIDs to UNIX IDs is not made algorithmically and depends on the order in which unmapped users or groups are seen by Winbind. It may be difficult to recover the mappings of RID to UNIX ID mapping if the file containing this information is corrupted or destroyed.

  • Currently the Winbind PAM module does not take into account possible workstation and logon time restrictions that may be set for Windows NT users, this is instead up to the PDC to enforce.

NSCD Problem Warning

Warning

Do not under any circumstances run nscd on any system on which winbindd is running.

If nscd is running on the UNIX/Linux system, then even though NSSWITCH is correctly configured it will not be possible to resolve domain users and groups for file and directory controls.

Winbind Is Not Resolving Users and Groups

My smb.conf file is correctly configured. I have specified idmap uid = 12000, and idmap gid = 3000-3500 and winbind is running. When I do the following it all works fine.

root# wbinfo -u
MIDEARTH+maryo
MIDEARTH+jackb
MIDEARTH+ameds
...
MIDEARTH+root

root# wbinfo -g
MIDEARTH+Domain Users
MIDEARTH+Domain Admins
MIDEARTH+Domain Guests
...
MIDEARTH+Accounts

root# getent passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/bash
...
maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false

But the following command just fails:

root# chown maryo a_file
chown: `maryo': invalid user
This is driving me nuts! What can be wrong? ”

Same problem as the one above. Your system is likely running nscd, the name service caching daemon. Shut it down, do not restart it! You will find your problem resolved.

Chapter 22. Advanced Network Management

John H. Terpstra

Samba Team

April 3 2003

This section documents peripheral issues that are of great importance to network administrators who want to improve network resource access control, to automate the user environment and to make their lives a little easier.

Features and Benefits

Often the difference between a working network environment and a well appreciated one can best be measured by the little things that make everything work more harmoniously. A key part of every network environment solution is the ability to remotely manage MS Windows workstations, remotely access the Samba server, provide customized logon scripts, as well as other housekeeping activities that help to sustain more reliable network operations.

This chapter presents information on each of these areas. They are placed here, and not in other chapters, for ease of reference.

Remote Server Administration

How do I get `User Manager' and `Server Manager'?

Since I do not need to buy an NT4 Server, how do I get the `User Manager for Domains' and the `Server Manager'?

Microsoft distributes a version of these tools called Nexus.exe for installation on Windows 9x/Me systems. The tools set includes:

  • Server Manager
  • User Manager for Domains
  • Event Viewer

Download the archived file at ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE.

The Windows NT 4.0 version of the `User Manager for Domains' and `Server Manager' are available from Microsoft via ftp.

Remote Desktop Management

There are a number of possible remote desktop management solutions that range from free through costly. Do not let that put you off. Sometimes the most costly solution is the most cost effective. In any case, you will need to draw your own conclusions as to which is the best tool in your network environment.

Remote Management from NoMachine.Com

The following information was posted to the Samba mailing list at Apr 3 23:33:50 GMT 2003. It is presented in slightly edited form (with author details omitted for privacy reasons). The entire answer is reproduced below with some comments removed.

I have a wonderful Linux/Samba server running as pdc for a network. Now I would like to add remote desktop capabilities so users outside could login to the system and get their desktop up from home or another country.

Is there a way to accomplish this? Do I need a Windows Terminal Server? Do I need to configure it so it is a member of the domain or a BDC,PDC? Are there any hacks for MS Windows XP to enable remote login even if the computer is in a domain?

Answer provided: Check out the new offer from NoMachine, “NX” software: http://www.nomachine.com/.

It implements an easy-to-use interface to the Remote X protocol as well as incorporating VNC/RFB and rdesktop/RDP into it, but at a speed performance much better than anything you may have ever seen.

Remote X is not new at all, but what they did achieve successfully is a new way of compression and caching technologies that makes the thing fast enough to run even over slow modem/ISDN connections.

I could test drive their (public) Red Hat machine in Italy, over a loaded Internet connection, with enabled thumbnail previews in KDE konqueror which popped up immediately on “mouse-over”. From inside that (remote X) session I started a rdesktop session on another, a Windows XP machine. To test the performance, I played Pinball. I am proud to announce that my score was 631750 points at first try.

NX performs better on my local LAN than any of the other “pure” connection methods I am using from time to time: TightVNC, rdesktop or Remote X. It is even faster than a direct crosslink connection between two nodes.

I even got sound playing from the Remote X app to my local boxes, and had a working “copy'n'paste” from an NX window (running a KDE session in Italy) to my Mozilla mailing agent. These guys are certainly doing something right!

I recommend to test drive NX to anybody with a only a passing interest in remote computing http://www.nomachine.com/testdrive.php.

Just download the free of charge client software (available for Red Hat, SuSE, Debian and Windows) and be up and running within five minutes (they need to send you your account data, though, because you are assigned a real UNIX account on their testdrive.nomachine.com box.

They plan to get to the point were you can have NX application servers running as a cluster of nodes, and users simply start an NX session locally, and can select applications to run transparently (apps may even run on another NX node, but pretend to be on the same as used for initial login, because it displays in the same window. You also can run it fullscreen, and after a short time you forget that it is a remote session at all).

Now the best thing for last: All the core compression and caching technologies are released under the GPL and available as source code to anybody who wants to build on it! These technologies are working, albeit started from the command line only (and very inconvenient to use in order to get a fully running remote X session up and running.)

To answer your questions:

  • You do not need to install a terminal server; XP has RDP support built in.

  • NX is much cheaper than Citrix and comparable in performance, probably faster.

  • You do not need to hack XP it just works.

  • You log into the XP box from remote transparently (and I think there is no need to change anything to get a connection, even if authentication is against a domain).

  • The NX core technologies are all Open Source and released under the GPL you can now use a (very inconvenient) commandline at no cost, but you can buy a comfortable (proprietary) NX GUI frontend for money.

  • NoMachine are encouraging and offering help to OSS/Free Software implementations for such a frontend too, even if it means competition to them (they have written to this effect even to the LTSP, KDE and GNOME developer mailing lists).

Network Logon Script Magic

There are several opportunities for creating a custom network startup configuration environment.

  • No Logon Script.
  • Simple universal Logon Script that applies to all users.
  • Use of a conditional Logon Script that applies per user or per group attributes.
  • Use of Samba's preexec and postexec functions on access to the NETLOGON share to create a custom logon script and then execute it.
  • User of a tool such as KixStart.

The Samba source code tree includes two logon script generation/execution tools. See examples directory genlogon and ntlogon subdirectories.

The following listings are from the genlogon directory.

This is the genlogon.pl file:

	#!/usr/bin/perl
	#
	# genlogon.pl
	#
	# Perl script to generate user logon scripts on the fly, when users
	# connect from a Windows client. This script should be called from 
	# smb.conf with the %U, %G and %L parameters. I.e:
	#
	#       root preexec = genlogon.pl %U %G %L
	#
	# The script generated will perform
	# the following:
	#
	# 1. Log the user connection to /var/log/samba/netlogon.log
	# 2. Set the PC's time to the Linux server time (which is maintained
	#    daily to the National Institute of Standard's Atomic clock on the
	#    internet.
	# 3. Connect the user's home drive to H: (H for Home).
	# 4. Connect common drives that everyone uses.
	# 5. Connect group-specific drives for certain user groups.
	# 6. Connect user-specific drives for certain users.
	# 7. Connect network printers.

	# Log client connection
	#($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
	($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
	open LOG, ">>/var/log/samba/netlogon.log";
	print LOG "$mon/$mday/$year $hour:$min:$sec";
	print LOG " - User $ARGV[0] logged into $ARGV[1]\n";
	close LOG;

	# Start generating logon script
	open LOGON, ">/shared/netlogon/$ARGV[0].bat";
	print LOGON "\@ECHO OFF\r\n";

	# Connect shares just use by Software Development group
	if ($ARGV[1] eq "SOFTDEV" || $ARGV[0] eq "softdev")
	{
		print LOGON "NET USE M: \\\\$ARGV[2]\\SOURCE\r\n";
	}

	# Connect shares just use by Technical Support staff
	if ($ARGV[1] eq "SUPPORT" || $ARGV[0] eq "support")
	{
		print LOGON "NET USE S: \\\\$ARGV[2]\\SUPPORT\r\n";
	}

	# Connect shares just used by Administration staff
	If ($ARGV[1] eq "ADMIN" || $ARGV[0] eq "admin")
	{
		print LOGON "NET USE L: \\\\$ARGV[2]\\ADMIN\r\n";
		print LOGON "NET USE K: \\\\$ARGV[2]\\MKTING\r\n";
	}

	# Now connect Printers. We handle just two or three users a little
	# differently, because they are the exceptions that have desktop
	# printers on LPT1: - all other user's go to the LaserJet on the
	# server.
	if ($ARGV[0] eq 'jim'
	    || $ARGV[0] eq 'yvonne')
	{
		print LOGON "NET USE LPT2: \\\\$ARGV[2]\\LJET3\r\n";
		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
	}
	else
	{
		print LOGON "NET USE LPT1: \\\\$ARGV[2]\\LJET3\r\n";
		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
	}

	# All done! Close the output file.
	close LOGON;

Those wishing to use more elaborate or capable logon processing system should check out these sites:

  • http://www.craigelachi.e.org/rhacer/ntlogon
  • http://www.kixtart.org

Adding Printers without User Intervention

Printers may be added automatically during logon script processing through the use of:

C:\> rundll32 printui.dll,PrintUIEntry /?

See the documentation in the Microsoft knowledgebase article 189105.

Chapter 23. System and Account Policies

John H. Terpstra

Samba Team

April 3 2003

This chapter summarizes the current state of knowledge derived from personal practice and knowledge from Samba mailing list subscribers. Before reproduction of posted information, every effort has been made to validate the information given. Where additional information was uncovered through this validation it is provided also.

Features and Benefits

When MS Windows NT 3.5 was introduced, the hot new topic was the ability to implement Group Policies for users and groups. Then along came MS Windows NT4 and a few sites started to adopt this capability. How do we know that? By the number of “booboos” (or mistakes) administrators made and then requested help to resolve.

By the time that MS Windows 2000 and Active Directory was released, administrators got the message: Group Policies are a good thing! They can help reduce administrative costs and actually make happier users. But adoption of the true potential of MS Windows 200x Active Directory and Group Policy Objects (GPOs) for users and machines were picked up on rather slowly. This was obvious from the Samba mailing list as in 2000 and 2001 when there were few postings regarding GPOs and how to replicate them in a Samba environment.

Judging by the traffic volume since mid 2002, GPOs have become a standard part of the deployment in many sites. This chapter reviews techniques and methods that can be used to exploit opportunities for automation of control over user desktops and network client workstations.

A tool new to Samba the editreg tool may become an important part of the future Samba administrators' arsenal is described in this document.

Creating and Managing System Policies

Under MS Windows platforms, particularly those following the release of MS Windows NT4 and MS Windows 95, it is possible to create a type of file that would be placed in the NETLOGON share of a Domain Controller. As the client logs onto the network, this file is read and the contents initiate changes to the registry of the client machine. This file allows changes to be made to those parts of the registry that affect users, groups of users, or machines.

For MS Windows 9x/ME, this file must be called Config.POL and may be generated using a tool called poledit.exe, better known as the Policy Editor. The policy editor was provided on the Windows 98 installation CD, but disappeared again with the introduction of MS Windows Me (Millennium Edition). From comments of MS Windows network administrators, it would appear that this tool became a part of the MS Windows Me Resource Kit.

MS Windows NT4 Server products include the System Policy Editor under Start -> Programs -> Administrative Tools. For MS Windows NT4 and later clients, this file must be called NTConfig.POL.

New with the introduction of MS Windows 2000 was the Microsoft Management Console or MMC. This tool is the new wave in the ever-changing landscape of Microsoft methods for management of network access and security. Every new Microsoft product or technology seems to make the old rules obsolete and introduces newer and more complex tools and methods. To Microsoft's credit, the MMC does appear to be a step forward, but improved functionality comes at a great price.

Before embarking on the configuration of network and system policies, it is highly advisable to read the documentation available from Microsoft's Web site regarding Implementing Profiles and Policies in Windows NT 4.0 available from Microsoft. There are a large number of documents in addition to this old one that should also be read and understood. Try searching on the Microsoft Web site for “Group Policies”.

What follows is a brief discussion with some helpful notes. The information provided here is incomplete you are warned.

Windows 9x/ME Policies

You need the Windows 98 Group Policy Editor to set up Group Profiles under Windows 9x/ME. It can be found on the original full product Windows 98 installation CD under tools/reskit/netadmin/poledit. Install this using the Add/Remove Programs facility and then click on Have Disk.

Use the Group Policy Editor to create a policy file that specifies the location of user profiles and/or My Documents, and so on. Then save these settings in a file called Config.POL that needs to be placed in the root of the [NETLOGON] share. If Windows 98 is configured to log onto the Samba Domain, it will automatically read this file and update the Windows 9x/Me registry of the machine as it logs on.

Further details are covered in the Windows 98 Resource Kit documentation.

If you do not take the correct steps, then every so often Windows 9x/ME will check the integrity of the registry and restore its settings from the back-up copy of the registry it stores on each Windows 9x/ME machine. So, you will occasionally notice things changing back to the original settings.

Install the group policy handler for Windows 9x/Me to pick up Group Policies. Look on the Windows 98 CDROM in \tools\reskit\netadmin\poledit. Install group policies on a Windows 9x/Me client by double-clicking on grouppol.inf. Log off and on again a couple of times and see if Windows 98 picks up Group Policies. Unfortunately, this needs to be done on every Windows 9x/Me machine that uses Group Policies.

Windows NT4-Style Policy Files

To create or edit ntconfig.pol you must use the NT Server Policy Editor, poledit.exe, which is included with NT4 Server but not with NT Workstation. There is a Policy Editor on an NT4 Workstation but it is not suitable for creating domain policies. Furthermore, although the Windows 95 Policy Editor can be installed on an NT4 Workstation/Server, it will not work with NT clients. However, the files from the NT Server will run happily enough on an NT4 Workstation.

You need poledit.exe, common.adm and winnt.adm. It is convenient to put the two *.adm files in the c:\winnt\inf directory, which is where the binary will look for them unless told otherwise. This directory is normally “hidden.

The Windows NT policy editor is also included with the Service Pack 3 (and later) for Windows NT 4.0. Extract the files using servicepackname /x, that's Nt4sp6ai.exe /x for service pack 6a. The Policy Editor, poledit.exe, and the associated template files (*.adm) should be extracted as well. It is also possible to downloaded the policy template files for Office97 and get a copy of the Policy Editor. Another possible location is with the Zero Administration Kit available for download from Microsoft.

Registry Spoiling

With NT4-style registry-based policy changes, a large number of settings are not automatically reversed as the user logs off. The settings that were in the NTConfig.POL file were applied to the client machine registry and apply to the hive key HKEY_LOCAL_MACHINE are permanent until explicitly reversed. This is known as tattooing. It can have serious consequences downstream and the administrator must be extremely careful not to lock out the ability to manage the machine at a later date.

MS Windows 200x/XP Professional Policies

Windows NT4 system policies allow the setting of registry parameters specific to users, groups and computers (client workstations) that are members of the NT4-style domain. Such policy files will work with MS Windows 200x/XP clients also.

New to MS Windows 2000, Microsoft recently introduced a style of group policy that confers a superset of capabilities compared with NT4-style policies. Obviously, the tool used to create them is different, and the mechanism for implementing them is much improved.

The older NT4-style registry-based policies are known as Administrative Templates in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes the ability to set various security configurations, enforce Internet Explorer browser settings, change and redirect aspects of the users desktop (including the location of My Documents files (directory), as well as intrinsics of where menu items will appear in the Start menu). An additional new feature is the ability to make available particular software Windows applications to particular users and/or groups.

Remember, NT4 policy files are named NTConfig.POL and are stored in the root of the NETLOGON share on the Domain Controllers. A Windows NT4 user enters a username, password and selects the domain name to which the logon will attempt to take place. During the logon process, the client machine reads the NTConfig.POL file from the NETLOGON share on the authenticating server and modifies the local registry values according to the settings in this file.

Windows 200x GPOs are feature-rich. They are not stored in the NETLOGON share, but rather part of a Windows 200x policy file is stored in the Active Directory itself and the other part is stored in a shared (and replicated) volume called the SYSVOL folder. This folder is present on all Active Directory Domain Controllers. The part that is stored in the Active Directory itself is called the Group Policy Container (GPC), and the part that is stored in the replicated share called SYSVOL is known as the Group Policy Template (GPT).

With NT4 clients, the policy file is read and executed only as each user logs onto the network. MS Windows 200x policies are much more complex GPOs are processed and applied at client machine startup (machine specific part) and when the user logs onto the network, the user-specific part is applied. In MS Windows 200x-style policy management, each machine and/or user may be subject to any number of concurrently applicable (and applied) policy sets (GPOs). Active Directory allows the administrator to also set filters over the policy settings. No such equivalent capability exists with NT4-style policy files.

Administration of Windows 200x/XP Policies

Instead of using the tool called The System Policy Editor, commonly called Poledit (from the executable name poledit.exe), GPOs are created and managed using a Microsoft Management Console (MMC) snap-in as follows:

  1. Go to the Windows 200x/XP menu Start->Programs->Administrative Tools and select the MMC snap-in called Active Directory Users and Computers

  2. Select the domain or organizational unit (OU) that you wish to manage, then right-click to open the context menu for that object, and select the Properties.

  3. Left-click on the Group Policy tab, then left-click on the New tab. Type a name for the new policy you will create.

  4. Left-click on the Edit tab to commence the steps needed to create the GPO.

All policy configuration options are controlled through the use of policy administrative templates. These files have an .adm extension, both in NT4 as well as in Windows 200x/XP. Beware, however, the .adm files are not interchangeable across NT4 and Windows 200x. The latter introduces many new features as well as extended definition capabilities. It is well beyond the scope of this documentation to explain how to program .adm files; for that the administrator is referred to the Microsoft Windows Resource Kit for your particular version of MS Windows.

Note

The MS Windows 2000 Resource Kit contains a tool called gpolmig.exe. This tool can be used to migrate an NT4 NTConfig.POL file into a Windows 200x style GPO. Be VERY careful how you use this powerful tool. Please refer to the resource kit manuals for specific usage information.

Managing Account/User Policies

Policies can define a specific user's settings or the settings for a group of users. The resulting policy file contains the registry settings for all users, groups, and computers that will be using the policy file. Separate policy files for each user, group, or computer are not necessary.

If you create a policy that will be automatically downloaded from validating Domain Controllers, you should name the file NTConfig.POL. As system administrator, you have the option of renaming the policy file and, by modifying the Windows NT-based workstation, directing the computer to update the policy from a manual path. You can do this by either manually changing the registry or by using the System Policy Editor. This can even be a local path such that each machine has its own policy file, but if a change is necessary to all machines, it must be made individually to each workstation.

When a Windows NT4/200x/XP machine logs onto the network, the client looks in the NETLOGON share on the authenticating domain controller for the presence of the NTConfig.POL file. If one exists it is downloaded, parsed and then applied to the user's part of the registry.

MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally acquire policy settings through Group Policy Objects (GPOs) that are defined and stored in Active Directory itself. The key benefit of using AS GPOs is that they impose no registry spoiling effect. This has considerable advantage compared with the use of NTConfig.POL (NT4) style policy updates.

In addition to user access controls that may be imposed or applied via system and/or group policies in a manner that works in conjunction with user profiles, the user management environment under MS Windows NT4/200x/XP allows per domain as well as per user account restrictions to be applied. Common restrictions that are frequently used include:

  • Logon hours
  • Password aging
  • Permitted logon from certain machines only
  • Account type (local or global)
  • User rights

Samba-3.0.0 doe not yet implement all account controls that are common to MS Windows NT4/200x/XP. While it is possible to set many controls using the Domain User Manager for MS Windows NT4, only password expirey is functional today. Most of the remaining controls at this time have only stub routines that may eventually be completed to provide actual control. Do not be misled by the fact that a parameter can be set using the NT4 Domain User Manager or in the NTConfig.POL.

Management Tools

Anyone who wishes to create or manage Group Policies will need to be familiar with a number of tools. The following sections describe a few key tools that will help you to create a low maintenance user environment.

Samba Editreg Toolset

A new tool called editreg is under development. This tool can be used to edit registry files (called NTUser.DAT) that are stored in user and group profiles. NTConfig.POL files have the same structure as the NTUser.DAT file and can be edited using this tool. editreg is being built with the intent to enable NTConfig.POL files to be saved in text format and to permit the building of new NTConfig.POL files with extended capabilities. It is proving difficult to realize this capability, so do not be surprised if this feature does not materialize. Formal capabilities will be announced at the time that this tool is released for production use.

Windows NT4/200x

The tools that may be used to configure these types of controls from the MS Windows environment are: the NT4 User Manager for Domains, the NT4 System and Group Policy Editor, and the Registry Editor (regedt32.exe). Under MS Windows 200x/XP, this is done using the Microsoft Management Console (MMC) with appropriate “snap-ins,” the registry editor, and potentially also the NT4 System and Group Policy Editor.

Samba PDC

With a Samba Domain Controller, the new tools for managing user account and policy information include: smbpasswd, pdbedit, net, rpcclient. The administrator should read the man pages for these tools and become familiar with their use.

System Startup and Logon Processing Overview

The following attempts to document the order of processing the system and user policies following a system reboot and as part of the user logon:

  1. Network starts, then Remote Procedure Call System Service (RPCSS) and Multiple Universal Naming Convention Provider (MUP) start.

  2. Where Active Directory is involved, an ordered list of Group Policy Objects (GPOs) is downloaded and applied. The list may include GPOs that:

    • Apply to the location of machines in a Directory.

    • Apply only when settings have changed.

    • Depend on configuration of the scope of applicability: local, site, domain, organizational unit, and so on.

    No desktop user interface is presented until the above have been processed.

  3. Execution of start-up scripts (hidden and synchronous by default).

  4. A keyboard action to effect start of logon (Ctrl-Alt-Del).

  5. User credentials are validated, user profile is loaded (depends on policy settings).

  6. An ordered list of user GPOs is obtained. The list contents depends on what is configured in respect of:

    • Is the user a Domain Member, thus subject to particular policies?
    • Loopback enablement, and the state of the loopback policy (Merge or Replace).
    • Location of the Active Directory itself.
    • Has the list of GPOs changed? No processing is needed if not changed.

  7. User Policies are applied from Active Directory. Note: There are several types.

  8. Logon scripts are run. New to Windows 200x and Active Directory, logon scripts may be obtained based on Group Policy objects (hidden and executed synchronously). NT4-style logon scripts are then run in a normal window.

  9. The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like an NT4 Domain), machine (system) policies are applied at start-up; user policies are applied at logon.

Common Errors

Policy-related problems can be quite difficult to diagnose and even more difficult to rectify. The following collection demonstrates only basic issues.

Policy Does Not Work

We have created the Config.POL file and put it in the NETLOGON share. It has made no difference to our Win XP Pro machines, they just do not see it. It worked fine with Win 98 but does not work any longer since we upgraded to Win XP Pro. Any hints?

Policy files are not portable between Windows 9x/Me and MS Windows NT4/200x/XP-based platforms. You need to use the NT4 Group Policy Editor to create a file called NTConfig.POL so it is in the correct format for your MS Windows XP Pro clients.

Chapter 24. Desktop Profile Management

John H. Terpstra

Samba Team

April 3 2003

Features and Benefits

Roaming profiles are feared by some, hated by a few, loved by many, and a Godsend for some administrators.

Roaming profiles allow an administrator to make available a consistent user desktop as the user moves from one machine to another. This chapter provides much information regarding how to configure and manage roaming profiles.

While roaming profiles might sound like nirvana to some, they are a real and tangible problem to others. In particular, users of mobile computing tools, where often there may not be a sustained network connection, are often better served by purely local profiles. This chapter provides information to help the Samba administrator deal with those situations.

Roaming Profiles

Warning

Roaming profiles support is different for Windows 9x/Me and Windows NT4/200x.

Before discussing how to configure roaming profiles, it is useful to see how Windows 9x/Me and Windows NT4/200x clients implement these features.

Windows 9x/Me clients send a NetUserGetInfo request to the server to get the user's profiles location. However, the response does not have room for a separate profiles location field, only the user's home share. This means that Windows 9x/Me profiles are restricted to being stored in the user's home directory.

Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields including a separate field for the location of the user's profiles.

Samba Configuration for Profile Handling

This section documents how to configure Samba for MS Windows client profile support.

NT4/200x User Profiles

For example, to support Windows NT4/200x clients, set the followoing in the [global] section of the smb.conf file:

logon path = \\profileserver\profileshare\profilepath\%U\moreprofilepath

This is typically implemented like:

logon path = \\%L\Profiles\%u

where “%L” translates to the name of the Samba server and “%u” translates to the user name.

The default for this option is \\%N\%U\profile, namely \\sambaserver\username\profile. The \\N%\%U service is created automatically by the [homes] service. If you are using a Samba server for the profiles, you must make the share that is specified in the logon path browseable. Please refer to the man page for smb.conf in respect of the different semantics of “%L” and “%N”, as well as “%U” and “%u”.

Note

MS Windows NT/200x clients at times do not disconnect a connection to a server between logons. It is recommended to not use the homes meta-service name as part of the profile share path.

Windows 9x/Me User Profiles

To support Windows 9x/Me clients, you must use the logon home parameter. Samba has been fixed so net use /home now works as well and it, too, relies on the logon home parameter.

By using the logon home parameter, you are restricted to putting Windows 9x/Me profiles in the user's home directory. But wait! There is a trick you can use. If you set the following in the [global] section of your smb.conf file:

logon home = \\%L\%U\.profiles

then your Windows 9x/Me clients will dutifully put their clients in a subdirectory of your home directory called .profiles (making them hidden).

Not only that, but net use /home will also work because of a feature in Windows 9x/Me. It removes any directory stuff off the end of the home directory area and only uses the server and share portion. That is, it looks like you specified \\%L\%U for logon home.

Mixed Windows 9x/Me and Windows NT4/200x User Profiles

You can support profiles for Windows 9x and Windows NT clients by setting both the logon home and logon path parameters. For example:

logon home = \\%L\%u\.profiles
logon path = \\%L\profiles\%u

Disabling Roaming Profile Support

A question often asked is: “How may I enforce use of local profiles?” or “How do I disable roaming profiles?

There are three ways of doing this:

In smb.conf

Affect the following settings and ALL clients will be forced to use a local profile: logon home and logon path

MS Windows Registry

By using the Microsoft Management Console gpedit.msc to instruct your MS Windows XP machine to use only a local profile. This, of course, modifies registry settings. The full path to the option is:

Local Computer Policy\
	Computer Configuration\
		Administrative Templates\
			System\
				User Profiles\

Disable: Only Allow Local User Profiles 
Disable: Prevent Roaming Profile Change from Propagating to the Server

Change of Profile Type:

From the start menu right-click on My Computer icon, select Properties, click on the User Profiles tab, select the profile you wish to change from Roaming type to Local, and click on Change Type.

Consult the MS Windows registry guide for your particular MS Windows version for more information about which registry keys to change to enforce use of only local user profiles.

Note

The specifics of how to convert a local profile to a roaming profile, or a roaming profile to a local one vary according to the version of MS Windows you are running. Consult the Microsoft MS Windows Resource Kit for your version of Windows for specific information.

Windows Client Profile Configuration Information

Windows 9x/Me Profile Setup

When a user first logs in on Windows 9X, the file user.DAT is created, as are folders Start Menu, Desktop, Programs, and Nethood. These directories and their contents will be merged with the local versions stored in c:\windows\profiles\username on subsequent logins, taking the most recent from each. You will need to use the [global] options preserve case = yes, short preserve case = yes and case sensitive = no in order to maintain capital letters in shortcuts in any of the profile folders.

The user.DAT file contains all the user's preferences. If you wish to enforce a set of preferences, rename their user.DAT file to user.MAN, and deny them write access to this file.

  1. On the Windows 9x/Me machine, go to Control Panel -> Passwords and select the User Profiles tab. Select the required level of roaming preferences. Press OK, but do not allow the computer to reboot.

  2. On the Windows 9x/Me machine, go to Control Panel -> Network -> Client for Microsoft Networks -> Preferences. Select Log on to NT Domain. Then, ensure that the Primary Logon is Client for Microsoft Networks. Press OK, and this time allow the computer to reboot.

Under Windows 9x/ME, profiles are downloaded from the Primary Logon. If you have the Primary Logon as “Client for Novell Networks”, then the profiles and logon script will be downloaded from your Novell Server. If you have the Primary Logon as “Windows Logon”, then the profiles will be loaded from the local machine a bit against the concept of roaming profiles, it would seem!

You will now find that the Microsoft Networks Login box contains [user, password, domain] instead of just [user, password]. Type in the Samba server's domain name (or any other domain known to exist, but bear in mind that the user will be authenticated against this domain and profiles downloaded from it, if that domain logon server supports it), user name and user's password.

Once the user has been successfully validated, the Windows 9x/Me machine will inform you that The user has not logged on before and asks you Do you wish to save the user's preferences? Select Yes.

Once the Windows 9x/Me client comes up with the desktop, you should be able to examine the contents of the directory specified in the logon path on the Samba server and verify that the Desktop, Start Menu, Programs and Nethood folders have been created.

These folders will be cached locally on the client, and updated when the user logs off (if you haven't made them read-only by then). You will find that if the user creates further folders or shortcut, that the client will merge the profile contents downloaded with the contents of the profile directory already on the local client, taking the newest folders and shortcut from each set.

If you have made the folders/files read-only on the Samba server, then you will get errors from the Windows 9x/Me machine on logon and logout as it attempts to merge the local and remote profile. Basically, if you have any errors reported by the Windows 9x/Me machine, check the UNIX file permissions and ownership rights on the profile directory contents, on the Samba server.

If you have problems creating user profiles, you can reset the user's local desktop cache, as shown below. When this user next logs in, the user will be told that he/she is logging in “for the first time”.

  1. Instead of logging in under the [user, password, domain] dialog, press escape.

  2. Run the regedit.exe program, and look in:

    HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList

    You will find an entry for each user of ProfilePath. Note the contents of this key (likely to be c:\windows\profiles\username), then delete the key ProfilePath for the required user.

  3. Exit the registry editor.

  4. Search for the user's .PWL password-caching file in the c:\windows directory, and delete it.

  5. Log off the Windows 9x/Me client.

  6. Check the contents of the profile path (see logon path described above) and delete the user.DAT or user.MAN file for the user, making a backup if required.

Warning

Before deleting the contents of the directory listed in the ProfilePath (this is likely to be c:\windows\profiles\username), ask the owner if they have any important files stored on their desktop or in their start menu. Delete the contents of the directory ProfilePath (making a backup if any of the files are needed).

This will have the effect of removing the local (read-only hidden system file) user.DAT in their profile directory, as well as the local “desktop,” “nethood,” “start menu,” and “programs” folders.

If all else fails, increase Samba's debug log levels to between 3 and 10, and/or run a packet sniffer program such as ethereal or netmon.exe, and look for error messages.

If you have access to an Windows NT4/200x server, then first set up roaming profiles and/or netlogons on the Windows NT4/200x server. Make a packet trace, or examine the example packet traces provided with Windows NT4/200x server, and see what the differences are with the equivalent Samba trace.

Windows NT4 Workstation

When a user first logs in to a Windows NT Workstation, the profile NTuser.DAT is created. The profile location can be now specified through the logon path parameter.

There is a parameter that is now available for use with NT Profiles: logon drive. This should be set to H: or any other drive, and should be used in conjunction with the new logon home parameter.

The entry for the NT4 profile is a directory not a file. The NT help on Profiles mentions that a directory is also created with a .PDS extension. The user, while logging in, must have write permission to create the full profile path (and the folder with the .PDS extension for those situations where it might be created.)

In the profile directory, Windows NT4 creates more folders than Windows 9x/Me. It creates Application Data and others, as well as Desktop, Nethood, Start Menu, and Programs. The profile itself is stored in a file NTuser.DAT. Nothing appears to be stored in the .PDS directory, and its purpose is currently unknown.

You can use the System Control Panel to copy a local profile onto a Samba server (see NT Help on Profiles; it is also capable of firing up the correct location in the System Control Panel for you). The NT Help file also mentions that renaming NTuser.DAT to NTuser.MAN turns a profile into a mandatory one.

The case of the profile is significant. The file must be called NTuser.DAT or, for a mandatory profile, NTuser.MAN.

Windows 2000/XP Professional

You must first convert the profile from a local profile to a domain profile on the MS Windows workstation as follows:

  1. Log on as the local workstation administrator.

  2. Right-click on the My Computer Icon, select Properties.

  3. Click on the User Profiles tab.

  4. Select the profile you wish to convert (click it once).

  5. Click on the Copy To button.

  6. In the Permitted to use box, click on the Change button.

  7. Click on the Look in area that lists the machine name. When you click here, it will open up a selection box. Click on the domain to which the profile must be accessible.

    Note

    You will need to log on if a logon box opens up. For example, connect as DOMAIN\root, password: mypassword.

  8. To make the profile capable of being used by anyone, select “Everyone”.

  9. Click on OK and the Selection box will close.

  10. Now click on OK to create the profile in the path you nominated.

Done. You now have a profile that can be edited using the Samba profiles tool.

Note

Under Windows NT/200x, the use of mandatory profiles forces the use of MS Exchange storage of mail data and keeps it out of the desktop profile. That keeps desktop profiles from becoming unusable.

Windows XP Service Pack 1

There is a security check new to Windows XP (or maybe only Windows XP service pack 1). It can be disabled via a group policy in the Active Directory. The policy is called:

Computer Configuration\Administrative Templates\System\User Profiles\Do not check for user ownership of Roaming Profile Foldersi

This should be set to Enabled.

Does the new version of Samba have an Active Directory analogue? If so, then you may be able to set the policy through this.

If you cannot set group policies in Samba, then you may be able to set the policy locally on each machine. If you want to try this, then do the following (N.B. I do not know for sure that this will work in the same way as a domain group policy):

  1. On the XP workstation, log in with an Administrative account.

  2. Click on Start -> Run.

  3. Type mmc.

  4. Click on OK.

  5. A Microsoft Management Console should appear.

  6. Click on File -> Add/Remove Snap-in -> Add.

  7. Double-click on Group Policy.

  8. Click on Finish -> Close.

  9. Click on OK.

  10. In the “Console Root” window expand Local Computer Policy -> Computer Configuration -> Administrative Templates -> System -> User Profiles.

  11. Double-click on Do not check for user ownership of Roaming Profile Folders.

  12. Select Enabled.

  13. Click on OK.

  14. Close the whole console. You do not need to save the settings (this refers to the console settings rather than the policies you have changed).

  15. Reboot.

Sharing Profiles between W9x/Me and NT4/200x/XP Workstations

Sharing of desktop profiles between Windows versions is not recommended. Desktop profiles are an evolving phenomenon and profiles for later versions of MS Windows clients add features that may interfere with earlier versions of MS Windows clients. Probably the more salient reason to not mix profiles is that when logging off an earlier version of MS Windows, the older format of profile contents may overwrite information that belongs to the newer version resulting in loss of profile information content when that user logs on again with the newer version of MS Windows.

If you then want to share the same Start Menu/Desktop with W9x/Me, you will need to specify a common location for the profiles. The smb.conf parameters that need to be common are logon path and logon home.

If you have this set up correctly, you will find separate user.DAT and NTuser.DAT files in the same profile directory.

Profile Migration from Windows NT4/200x Server to Samba

There is nothing to stop you from specifying any path that you like for the location of users' profiles. Therefore, you could specify that the profile be stored on a Samba server, or any other SMB server, as long as that SMB server supports encrypted passwords.

Windows NT4 Profile Management Tools

Unfortunately, the Resource Kit information is specific to the version of MS Windows NT4/200x. The correct resource kit is required for each platform.

Here is a quick guide:

  1. On your NT4 Domain Controller, right click on My Computer, then select the tab labeled User Profiles.

  2. Select a user profile you want to migrate and click on it.

    Note

    I am using the term “migrate” loosely. You can copy a profile to create a group profile. You can give the user Everyone rights to the profile you copy this to. That is what you need to do, since your Samba domain is not a member of a trust relationship with your NT4 PDC.

  3. Click on the Copy To button.

  4. In the box labeled Copy Profile to add your new path, e.g., c:\temp\foobar

  5. Click on Change in the Permitted to use box.

  6. Click on the group “Everyone”, click on OK. This closes the “choose user” box.

  7. Now click on OK.

Follow the above for every profile you need to migrate.

Side Bar Notes

You should obtain the SID of your NT4 domain. You can use smbpasswd to do this. Read the man page.

moveuser.exe

The Windows 200x professional resource kit has moveuser.exe. moveuser.exe changes the security of a profile from one user to another. This allows the account domain to change, and/or the user name to change.

This command is like the Samba profiles tool.

Get SID

You can identify the SID by using GetSID.exe from the Windows NT Server 4.0 Resource Kit.

Windows NT 4.0 stores the local profile information in the registry under the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

Under the ProfileList key, there will be subkeys named with the SIDs of the users who have logged on to this computer. (To find the profile information for the user whose locally cached profile you want to move, find the SID for the user with the GetSID.exe utility.) Inside the appropriate user's subkey, you will see a string value named ProfileImagePath.

Mandatory Profiles

A Mandatory Profile is a profile that the user does not have the ability to overwrite. During the user's session, it may be possible to change the desktop environment, however, as the user logs out all changes made will be lost. If it is desired to not allow the user any ability to change the desktop environment, then this must be done through policy settings. See the previous chapter.

Note

Under NO circumstances should the profile directory (or its contents) be made read-only as this may render the profile un-usable. Where it is essential to make a profile read-only within the UNIX file system, this can be done but then you absolutely must use the fake-permissions VFS module to instruct MS Windows NT/200x/XP clients that the Profile has write permission for the user. See .

For MS Windows NT4/200x/XP, the above method can also be used to create mandatory profiles. To convert a group profile into a mandatory profile, simply locate the NTUser.DAT file in the copied profile and rename it to NTUser.MAN.

For MS Windows 9x/ME, it is the User.DAT file that must be renamed to User.MAN to effect a mandatory profile.

Creating and Managing Group Profiles

Most organizations are arranged into departments. There is a nice benefit in this fact since usually most users in a department require the same desktop applications and the same desktop layout. MS Windows NT4/200x/XP will allow the use of Group Profiles. A Group Profile is a profile that is created first using a template (example) user. Then using the profile migration tool (see above), the profile is assigned access rights for the user group that needs to be given access to the group profile.

The next step is rather important. Instead of assigning a group profile to users (Using User Manager) on a “per user” basis, the group itself is assigned the now modified profile.

Note

Be careful with Group Profiles. If the user who is a member of a group also has a personal profile, then the result will be a fusion (merge) of the two.

Default Profile for Windows Users

MS Windows 9x/Me and NT4/200x/XP will use a default profile for any user for whom a profile does not already exist. Armed with a knowledge of where the default profile is located on the Windows workstation, and knowing which registry keys effect the path from which the default profile is created, it is possible to modify the default profile to one that has been optimized for the site. This has significant administrative advantages.

MS Windows 9x/Me

To enable default per use profiles in Windows 9x/ME, you can either use the Windows 98 System Policy Editor or change the registry directly.

To enable default per user profiles in Windows 9x/ME, launch the System Policy Editor, then select File -> Open Registry, next click on the Local Computer icon, click on Windows 98 System, select User Profiles, and click on the enable box. Remember to save the registry changes.

To modify the registry directly, launch the Registry Editor (regedit.exe) and select the hive HKEY_LOCAL_MACHINE\Network\Logon. Now add a DWORD type key with the name “User Profiles,” to enable user profiles to set the value to 1; to disable user profiles set it to 0.

User Profile Handling with Windows 9x/Me

When a user logs on to a Windows 9x/Me machine, the local profile path, HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ProfileList, is checked for an existing entry for that user.

If the user has an entry in this registry location, Windows 9x/Me checks for a locally cached version of the user profile. Windows 9x/Me also checks the user's home directory (or other specified directory if the location has been modified) on the server for the User Profile. If a profile exists in both locations, the newer of the two is used. If the User Profile exists on the server, but does not exist on the local machine, the profile on the server is downloaded and used. If the User Profile only exists on the local machine, that copy is used.

If a User Profile is not found in either location, the Default User Profile from the Windows 9x/Me machine is used and copied to a newly created folder for the logged on user. At log off, any changes that the user made are written to the user's local profile. If the user has a roaming profile, the changes are written to the user's profile on the server.

MS Windows NT4 Workstation

On MS Windows NT4, the default user profile is obtained from the location %SystemRoot%\Profiles which in a default installation will translate to C:\Windows NT\Profiles. Under this directory on a clean install there will be three (3) directories: Administrator, All Users, and Default User.

The All Users directory contains menu settings that are common across all system users. The Default User directory contains menu entries that are customizable per user depending on the profile settings chosen/created.

When a new user first logs onto an MS Windows NT4 machine, a new profile is created from:

  • All Users settings.

  • Default User settings (contains the default NTUser.DAT file).

When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain, the following steps are followed in respect of profile handling:

  1. The users' account information that is obtained during the logon process contains the location of the users' desktop profile. The profile path may be local to the machine or it may be located on a network share. If there exists a profile at the location of the path from the user account, then this profile is copied to the location %SystemRoot%\Profiles\%USERNAME%. This profile then inherits the settings in the All Users profile in the %SystemRoot%\Profiles location.

  2. If the user account has a profile path, but at its location a profile does not exist, then a new profile is created in the %SystemRoot%\Profiles\%USERNAME% directory from reading the Default User profile.

  3. If the NETLOGON share on the authenticating server (logon server) contains a policy file (NTConfig.POL), then its contents are applied to the NTUser.DAT which is applied to the HKEY_CURRENT_USER part of the registry.

  4. When the user logs out, if the profile is set to be a roaming profile it will be written out to the location of the profile. The NTuser.DAT file is then recreated from the contents of the HKEY_CURRENT_USER contents. Thus, should there not exist in the NETLOGON share an NTConfig.POL at the next logon, the effect of the previous NTConfig.POL will still be held in the profile. The effect of this is known as tattooing.

MS Windows NT4 profiles may be local or roaming. A local profile will stored in the %SystemRoot%\Profiles\%USERNAME% location. A roaming profile will also remain stored in the same way, unless the following registry key is created as shown:

 HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
winlogon\"DeleteRoamingCache"=dword:0000000
 

In this case, the local copy (in %SystemRoot%\Profiles\%USERNAME%) will be deleted on logout.

Under MS Windows NT4, default locations for common resources like My Documents may be redirected to a network share by modifying the following registry keys. These changes may be affected via use of the System Policy Editor. To do so may require that you create your own template extension for the policy editor to allow this to be done through the GUI. Another way to do this is by way of first creating a default user profile, then while logged in as that user, run regedt32 to edit the key settings.

The Registry Hive key that affects the behavior of folders that are part of the default user profile are controlled by entries on Windows NT4 is:

HKEY_CURRENT_USER
	\Software
		\Microsoft
			\Windows
				\CurrentVersion
					\Explorer
						\User Shell Folders

The above hive key contains a list of automatically managed folders. The default entries are shown in .

Table 24.1. User Shell Folder Registry Keys Default Values

NameDefault Value
AppData%USERPROFILE%\Application Data
Desktop%USERPROFILE%\Desktop
Favorites%USERPROFILE%\Favorites
NetHood%USERPROFILE%\NetHood
PrintHood%USERPROFILE%\PrintHood
Programs%USERPROFILE%\Start Menu\Programs
Recent%USERPROFILE%\Recent
SendTo%USERPROFILE%\SendTo
Start Menu %USERPROFILE%\Start Menu
Startup%USERPROFILE%\Start Menu\Programs\Startup

The registry key that contains the location of the default profile settings is:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ User Shell Folders

The default entries are shown in .

Table 24.2. Defaults of Profile Settings Registry Keys

Common Desktop%SystemRoot%\Profiles\All Users\Desktop
Common Programs%SystemRoot%\Profiles\All Users\Programs
Common Start Menu%SystemRoot%\Profiles\All Users\Start Menu
Common Startup%SystemRoot%\Profiles\All Users\Start Menu\Programs\Startup

MS Windows 200x/XP

Note

MS Windows XP Home Edition does use default per user profiles, but cannot participate in domain security, cannot log onto an NT/ADS-style domain, and thus can obtain the profile only from itself. While there are benefits in doing this, the beauty of those MS Windows clients that can participate in domain logon processes allows the administrator to create a global default profile and enforce it through the use of Group Policy Objects (GPOs).

When a new user first logs onto an MS Windows 200x/XP machine, the default profile is obtained from C:\Documents and Settings\Default User. The administrator can modify or change the contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum arrangement since it will involve copying a new default profile to every MS Windows 200x/XP client workstation.

When MS Windows 200x/XP participates in a domain security context, and if the default user profile is not found, then the client will search for a default profile in the NETLOGON share of the authenticating server. In MS Windows parlance,%LOGONSERVER%\NETLOGON\Default User, and if one exists there it will copy this to the workstation to the C:\Documents and Settings\ under the Windows login name of the user.

Note

This path translates, in Samba parlance, to the smb.conf [NETLOGON] share. The directory should be created at the root of this share and must be called Default Profile.

If a default profile does not exist in this location, then MS Windows 200x/XP will use the local default profile.

On logging out, the users' desktop profile will be stored to the location specified in the registry settings that pertain to the user. If no specific policies have been created or passed to the client during the login process (as Samba does automatically), then the user's profile will be written to the local machine only under the path C:\Documents and Settings\%USERNAME%.

Those wishing to modify the default behavior can do so through these three methods:

  • Modify the registry keys on the local machine manually and place the new default profile in the NETLOGON share root. This is not recommended as it is maintenance intensive.

  • Create an NT4-style NTConfig.POL file that specified this behavior and locate this file in the root of the NETLOGON share along with the new default profile.

  • Create a GPO that enforces this through Active Directory, and place the new default profile in the NETLOGON share.

The registry hive key that effects the behavior of folders that are part of the default user profile are controlled by entries on Windows 200x/XP is:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\

The above hive key contains a list of automatically managed folders. The default entries are shown in

Table 24.3. Defaults of Default User Profile Paths Registry Keys

NameDefault Value
AppData%USERPROFILE%\Application Data
Cache%USERPROFILE%\Local Settings\Temporary Internet Files
Cookies%USERPROFILE%\Cookies
Desktop%USERPROFILE%\Desktop
Favorites%USERPROFILE%\Favorites
History%USERPROFILE%\Local Settings\History
Local AppData%USERPROFILE%\Local Settings\Application Data
Local Settings%USERPROFILE%\Local Settings
My Pictures%USERPROFILE%\My Documents\My Pictures
NetHood%USERPROFILE%\NetHood
Personal%USERPROFILE%\My Documents
PrintHood%USERPROFILE%\PrintHood
Programs%USERPROFILE%\Start Menu\Programs
Recent%USERPROFILE%\Recent
SendTo%USERPROFILE%\SendTo
Start Menu%USERPROFILE%\Start Menu
Startup%USERPROFILE%\Start Menu\Programs\Startup
Templates%USERPROFILE%\Templates

There is also an entry called “Default” that has no value set. The default entry is of type REG_SZ, all the others are of type REG_EXPAND_SZ.

It makes a huge difference to the speed of handling roaming user profiles if all the folders are stored on a dedicated location on a network server. This means that it will not be necessary to write the Outlook PST file over the network for every login and logout.

To set this to a network location, you could use the following examples:

%LOGONSERVER%\%USERNAME%\Default Folders

This would store the folders in the user's home directory under a directory called Default Folders. You could also use:

\\SambaServer\FolderShare\%USERNAME%

in which case the default folders will be stored in the server named SambaServer in the share called FolderShare under a directory that has the name of the MS Windows user as seen by the Linux/UNIX file system.

Please note that once you have created a default profile share, you MUST migrate a user's profile (default or custom) to it.

MS Windows 200x/XP profiles may be Local or Roaming. A roaming profile will be cached locally unless the following registry key is created:

 HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
	winlogon\"DeleteRoamingCache"=dword:00000001

In this case, the local cache copy will be deleted on logout.

Common Errors

The following are some typical errors, problems and questions that have been asked on the Samba mailing lists.

Configuring Roaming Profiles for a Few Users or Groups

With Samba-2.2.x, the choice you have is to enable or disable roaming profiles support. It is a global only setting. The default is to have roaming profiles and the default path will locate them in the user's home directory.

If disabled globally, then no one will have roaming profile ability. If enabled and you want it to apply only to certain machines, then on those machines on which roaming profile support is not wanted it is then necessary to disable roaming profile handling in the registry of each such machine.

With Samba-3, you can have a global profile setting in smb.conf and you can override this by per-user settings using the Domain User Manager (as with MS Windows NT4/ Win 200xx).

In any case, you can configure only one profile per user. That profile can be either:

  • A profile unique to that user.
  • A mandatory profile (one the user cannot change).
  • A group profile (really should be mandatory, that is unchangable).

Cannot Use Roaming Profiles

A user requested the following: “ I do not want Roaming profiles to be implemented. I want to give users a local profile alone. Please help me, I am totally lost with this error. For the past two days I tried everything, I googled around but found no useful pointers. Please help me.

The choices are:

Local profiles

I know of no registry keys that will allow auto-deletion of LOCAL profiles on log out.

Roaming profiles

As a user logs onto the network, a centrally stored profile is copied to the workstation to form a local profile. This local profile will persist (remain on the workstation disk) unless a registry key is changed that will cause this profile to be automatically deleted on logout.

The roaming profile choices are:

Personal roaming profiles

These are typically stored in a profile share on a central (or conveniently located local) server.

Workstations cache (store) a local copy of the profile. This cached copy is used when the profile cannot be downloaded at next logon.

Group profiles

These are loaded from a central profile server.

Mandatory profiles

Mandatory profiles can be created for a user as well as for any group that a user is a member of. Mandatory profiles cannot be changed by ordinary users. Only the administrator can change or reconfigure a mandatory profile.

A Windows NT4/200x/XP profile can vary in size from 130KB to very large. Outlook PST files are most often part of the profile and can be many GB in size. On average (in a well controlled environment), roaming profile size of 2MB is a good rule of thumb to use for planning purposes. In an undisciplined environment, I have seen up to 2GB profiles. Users tend to complain when it takes an hour to log onto a workstation but they harvest the fruits of folly (and ignorance).

The point of all the above is to show that roaming profiles and good controls of how they can be changed as well as good discipline make up for a problem-free site.

Microsoft's answer to the PST problem is to store all email in an MS Exchange Server backend. This removes the need for a PST file.

Local profiles mean:

  • If each machine is used by many users, then much local disk storage is needed for local profiles.

  • Every workstation the user logs into has its own profile; these can be very different from machine to machine.

On the other hand, use of roaming profiles means:

  • The network administrator can control the desktop environment of all users.

  • Use of mandatory profiles drastically reduces network management overheads.

  • In the long run, users will experience fewer problems.

Changing the Default Profile

When the client logs onto the Domain Controller, it searches for a profile to download. Where do I put this default profile?

First, the Samba server needs to be configured as a Domain Controller. This can be done by setting in smb.conf:

security = user
os level = 32 (or more)
domain logons = Yes

There must be a [netlogon] share that is world readable. It is a good idea to add a logon script to pre-set printer and drive connections. There is also a facility for automatically synchronizing the workstation time clock with that of the logon server (another good thing to do).

Note

To invoke auto-deletion of roaming profile from the local workstation cache (disk storage), use the Group Policy Editor to create a file called NTConfig.POL with the appropriate entries. This file needs to be located in the netlogon share root directory.

Windows clients need to be members of the domain. Workgroup machines do not use network logons so they do not interoperate with domain profiles.

For roaming profiles, add to smb.conf:

logon path = \\%N\profiles\%U
# Default logon drive is Z:
logon drive = H:
# This requires a PROFILES share that is world writable.

Chapter 25. PAM-Based Distributed Authentication

John H. Terpstra

Samba Team

Stephen Langasek

May 31, 2003

This chapter should help you to deploy Winbind-based authentication on any PAM-enabled UNIX/Linux system. Winbind can be used to enable User-Level application access authentication from any MS Windows NT Domain, MS Windows 200x Active Directory-based domain, or any Samba-based domain environment. It will also help you to configure PAM-based local host access controls that are appropriate to your Samba configuration.

In addition to knowing how to configure Winbind into PAM, you will learn generic PAM management possibilities and in particular how to deploy tools like pam_smbpass.so to your advantage.

Note

The use of Winbind requires more than PAM configuration alone. Please refer to , for further information regarding Winbind.

Features and Benefits

A number of UNIX systems (e.g., Sun Solaris), as well as the xxxxBSD family and Linux, now utilize the Pluggable Authentication Modules (PAM) facility to provide all authentication, authorization and resource control services. Prior to the introduction of PAM, a decision to use an alternative to the system password database (/etc/passwd) would require the provision of alternatives for all programs that provide security services. Such a choice would involve provision of alternatives to programs such as: login, passwd, chown, and so on.

PAM provides a mechanism that disconnects these security programs from the underlying authentication/authorization infrastructure. PAM is configured by making appropriate modifications to one file /etc/pam.conf (Solaris), or by editing individual control files that are located in /etc/pam.d.

On PAM-enabled UNIX/Linux systems, it is an easy matter to configure the system to use any authentication backend so long as the appropriate dynamically loadable library modules are available for it. The backend may be local to the system, or may be centralized on a remote server.

PAM support modules are available for:

/etc/passwd

There are several PAM modules that interact with this standard UNIX user database. The most common are called: pam_unix.so, pam_unix2.so, pam_pwdb.so and pam_userdb.so.

Kerberos

The pam_krb5.so module allows the use of any Kerberos compliant server. This tool is used to access MIT Kerberos, Heimdal Kerberos, and potentially Microsoft Active Directory (if enabled).

LDAP

The pam_ldap.so module allows the use of any LDAP v2 or v3 compatible backend server. Commonly used LDAP backend servers include: OpenLDAP v2.0 and v2.1, Sun ONE iDentity server, Novell eDirectory server, Microsoft Active Directory.

NetWare Bindery

The pam_ncp_auth.so module allows authentication off any bindery-enabled NetWare Core Protocol-based server.

SMB Password

This module, called pam_smbpass.so, will allow user authentication off the passdb backend that is configured in the Samba smb.conf file.

SMB Server

The pam_smb_auth.so module is the original MS Windows networking authentication tool. This module has been somewhat outdated by the Winbind module.

Winbind

The pam_winbind.so module allows Samba to obtain authentication from any MS Windows Domain Controller. It can just as easily be used to authenticate users for access to any PAM-enabled application.

RADIUS

There is a PAM RADIUS (Remote Access Dial-In User Service) authentication module. In most cases, administrators will need to locate the source code for this tool and compile and install it themselves. RADIUS protocols are used by many routers and terminal servers.

Of the above, Samba provides the pam_smbpasswd.so and the pam_winbind.so modules alone.

Once configured, these permit a remarkable level of flexibility in the location and use of distributed Samba Domain Controllers that can provide wide area network bandwidth efficient authentication services for PAM-capable systems. In effect, this allows the deployment of centrally managed and maintained distributed authentication from a single-user account database.

Technical Discussion

PAM is designed to provide the system administrator with a great deal of flexibility in configuration of the privilege granting applications of their system. The local configuration of system security controlled by PAM is contained in one of two places: either the single system file, /etc/pam.conf, or the /etc/pam.d/ directory.

PAM Configuration Syntax

In this section we discuss the correct syntax of and generic options respected by entries to these files. PAM-specific tokens in the configuration file are case insensitive. The module paths, however, are case sensitive since they indicate a file's name and reflect the case dependence of typical file systems. The case-sensitivity of the arguments to any given module is defined for each module in turn.

In addition to the lines described below, there are two special characters provided for the convenience of the system administrator: comments are preceded by a “#” and extend to the next end-of-line; also, module specification lines may be extended with a “\” escaped newline.

If the PAM authentication module (loadable link library file) is located in the default location, then it is not necessary to specify the path. In the case of Linux, the default location is /lib/security. If the module is located outside the default, then the path must be specified as:

auth  required  /other_path/pam_strange_module.so

Anatomy of /etc/pam.d Entries

The remaining information in this subsection was taken from the documentation of the Linux-PAM project. For more information on PAM, see The Official Linux-PAM home page.

A general configuration line of the /etc/pam.conf file has the following form:

service-name   module-type   control-flag   module-path   args

Below, we explain the meaning of each of these tokens. The second (and more recently adopted) way of configuring Linux-PAM is via the contents of the /etc/pam.d/ directory. Once we have explained the meaning of the above tokens, we will describe this method.

service-name

The name of the service associated with this entry. Frequently, the service name is the conventional name of the given application. For example, ftpd, rlogind and su, and so on.

There is a special service-name reserved for defining a default authentication mechanism. It has the name OTHER and may be specified in either lower- or upper-case characters. Note, when there is a module specified for a named service, the OTHER entries are ignored.

module-type

One of (currently) four types of module. The four types are as follows:

  • auth: This module type provides two aspects of authenticating the user. It establishes that the user is who he claims to be by instructing the application to prompt the user for a password or other means of identification. Secondly, the module can grant group membership (independently of the /etc/groups file discussed above) or other privileges through its credential granting properties.

  • account: This module performs non-authentication-based account management. It is typically used to restrict/permit access to a service based on the time of day, currently available system resources (maximum number of users) or perhaps the location of the applicant user “root” login only on the console.

  • session: Primarily, this module is associated with doing things that need to be done for the user before and after they can be given service. Such things include the logging of information concerning the opening and closing of some data exchange with a user, mounting directories, and so on.

  • password: This last module type is required for updating the authentication token associated with the user. Typically, there is one module for each “challenge/response” -based authentication (auth) module type.

control-flag

The control-flag is used to indicate how the PAM library will react to the success or failure of the module it is associated with. Since modules can be stacked (modules of the same type execute in series, one after another), the control-flags determine the relative importance of each module. The application is not made aware of the individual success or failure of modules listed in the /etc/pam.conf file. Instead, it receives a summary success or fail response from the Linux-PAM library. The order of execution of these modules is that of the entries in the /etc/pam.conf file; earlier entries are executed before later ones. As of Linux-PAM v0.60, this control-flag can be defined with one of two syntaxes.

The simpler (and historical) syntax for the control-flag is a single keyword defined to indicate the severity of concern associated with the success or failure of a specific module. There are four such keywords: required, requisite, sufficient and optional.

The Linux-PAM library interprets these keywords in the following manner:

  • required: This indicates that the success of the module is required for the module-type facility to succeed. Failure of this module will not be apparent to the user until all of the remaining modules (of the same module-type) have been executed.

  • requisite: Like required, however, in the case that such a module returns a failure, control is directly returned to the application. The return value is that associated with the first required or requisite module to fail. This flag can be used to protect against the possibility of a user getting the opportunity to enter a password over an unsafe medium. It is conceivable that such behavior might inform an attacker of valid accounts on a system. This possibility should be weighed against the not insignificant concerns of exposing a sensitive password in a hostile environment.

  • sufficient: The success of this module is deemed sufficient to satisfy the Linux-PAM library that this module-type has succeeded in its purpose. In the event that no previous required module has failed, no more “stacked” modules of this type are invoked. (In this case, subsequent required modules are not invoked). A failure of this module is not deemed as fatal to satisfying the application that this module-type has succeeded.

  • optional: As its name suggests, this control-flag marks the module as not being critical to the success or failure of the user's application for service. In general, Linux-PAM ignores such a module when determining if the module stack will succeed or fail. However, in the absence of any definite successes or failures of previous or subsequent stacked modules, this module will determine the nature of the response to the application. One example of this latter case, is when the other modules return something like PAM_IGNORE.

The more elaborate (newer) syntax is much more specific and gives the administrator a great deal of control over how the user is authenticated. This form of the control flag is delimited with square brackets and consists of a series of value=action tokens:

[value1=action1 value2=action2 ...]

Here, value1 is one of the following return values:

success; open_err; symbol_err; service_err; system_err; buf_err;
perm_denied; auth_err; cred_insufficient; authinfo_unavail;
user_unknown; maxtries; new_authtok_reqd; acct_expired; session_err;
cred_unavail; cred_expired; cred_err; no_module_data; conv_err;
authtok_err; authtok_recover_err; authtok_lock_busy;
authtok_disable_aging; try_again; ignore; abort; authtok_expired;
module_unknown; bad_item; and default.

The last of these (default) can be used to set the action for those return values that are not explicitly defined.

The action1 can be a positive integer or one of the following tokens: ignore; ok; done; bad; die; and reset. A positive integer, J, when specified as the action, can be used to indicate that the next J modules of the current module-type will be skipped. In this way, the administrator can develop a moderately sophisticated stack of modules with a number of different paths of execution. Which path is taken can be determined by the reactions of individual modules.

  • ignore: When used with a stack of modules, the module's return status will not contribute to the return code the application obtains.

  • bad: This action indicates that the return code should be thought of as indicative of the module failing. If this module is the first in the stack to fail, its status value will be used for that of the whole stack.

  • die: Equivalent to bad with the side effect of terminating the module stack and PAM immediately returning to the application.

  • ok: This tells PAM that the administrator thinks this return code should contribute directly to the return code of the full stack of modules. In other words, if the former state of the stack would lead to a return of PAM_SUCCESS, the module's return code will override this value. Note, if the former state of the stack holds some value that is indicative of a modules failure, this ok value will not be used to override that value.

  • done: Equivalent to ok with the side effect of terminating the module stack and PAM immediately returning to the application.

  • reset: Clears all memory of the state of the module stack and starts again with the next stacked module.

Each of the four keywords: required; requisite; sufficient; and optional, have an equivalent expression in terms of the [...] syntax. They are as follows:

  • required is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=bad].

  • requisite is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=die].

  • sufficient is equivalent to [success=done new_authtok_reqd=done default=ignore].

  • optional is equivalent to [success=ok new_authtok_reqd=ok default=ignore].

Just to get a feel for the power of this new syntax, here is a taste of what you can do with it. With Linux-PAM-0.63, the notion of client plug-in agents was introduced. This is something that makes it possible for PAM to support machine-machine authentication using the transport protocol inherent to the client/server application. With the [ ... value=action ... ] control syntax, it is possible for an application to be configured to support binary prompts with compliant clients, but to gracefully fall over into an alternative authentication mode for older, legacy applications.

module-path

The path-name of the dynamically loadable object file; the pluggable module itself. If the first character of the module path is “/”, it is assumed to be a complete path. If this is not the case, the given module path is appended to the default module path: /lib/security (but see the notes above).

The arguments are a list of tokens that are passed to the module when it is invoked, much like arguments to a typical Linux shell command. Generally, valid arguments are optional and are specific to any given module. Invalid arguments are ignored by a module, however, when encountering an invalid argument, the module is required to write an error to syslog(3). For a list of generic options, see the next section.

If you wish to include spaces in an argument, you should surround that argument with square brackets. For example:

squid auth required pam_mysql.so user=passwd_query passwd=mada \
db=eminence [query=select user_name from internet_service where \
user_name=“%u” and password=PASSWORD(“%p”) and service=“web_proxy”]

When using this convention, you can include “[” characters inside the string, and if you wish to have a “]” character inside the string that will survive the argument parsing, you should use “\[”. In other words:

[..[..\]..]    -->   ..[..]..

Any line in one of the configuration files that is not formatted correctly will generally tend (erring on the side of caution) to make the authentication process fail. A corresponding error is written to the system log files with a call to syslog(3).

Example System Configurations

The following is an example /etc/pam.d/login configuration file. This example had all options uncommented and is probably not usable because it stacks many conditions before allowing successful completion of the login process. Essentially all conditions can be disabled by commenting them out, except the calls to pam_pwdb.so.

PAM: Original Login Config

#%PAM-1.0
# The PAM configuration file for the “login” service
#
auth         required    pam_securetty.so
auth         required    pam_nologin.so
# auth       required    pam_dialup.so
# auth       optional    pam_mail.so
auth         required    pam_pwdb.so shadow md5
# account    requisite   pam_time.so
account      required    pam_pwdb.so
session      required    pam_pwdb.so
# session    optional    pam_lastlog.so
# password   required    pam_cracklib.so retry=3
password     required    pam_pwdb.so shadow md5

PAM: Login Using pam_smbpass

PAM allows use of replaceable modules. Those available on a sample system include:

$/bin/ls /lib/security

pam_access.so    pam_ftp.so          pam_limits.so     
pam_ncp_auth.so  pam_rhosts_auth.so  pam_stress.so     
pam_cracklib.so  pam_group.so        pam_listfile.so   
pam_nologin.so   pam_rootok.so       pam_tally.so      
pam_deny.so      pam_issue.so        pam_mail.so       
pam_permit.so    pam_securetty.so    pam_time.so       
pam_dialup.so    pam_lastlog.so      pam_mkhomedir.so  
pam_pwdb.so      pam_shells.so       pam_UNIX.so       
pam_env.so       pam_ldap.so         pam_motd.so       
pam_radius.so    pam_smbpass.so      pam_UNIX_acct.so  
pam_wheel.so     pam_UNIX_auth.so    pam_UNIX_passwd.so
pam_userdb.so    pam_warn.so         pam_UNIX_session.so

The following example for the login program replaces the use of the pam_pwdb.so module that uses the system password database (/etc/passwd, /etc/shadow, /etc/group) with the module pam_smbpass.so, which uses the Samba database which contains the Microsoft MD4 encrypted password hashes. This database is stored in either /usr/local/samba/private/smbpasswd, /etc/samba/smbpasswd, or in /etc/samba.d/smbpasswd, depending on the Samba implementation for your UNIX/Linux system. The pam_smbpass.so module is provided by Samba version 2.2.1 or later. It can be compiled by specifying the --with-pam_smbpass options when running Samba's configure script. For more information on the pam_smbpass module, see the documentation in the source/pam_smbpass directory of the Samba source distribution.

#%PAM-1.0
# The PAM configuration file for the “login” service
#
auth        required    pam_smbpass.so nodelay
account     required    pam_smbpass.so nodelay
session     required    pam_smbpass.so nodelay
password    required    pam_smbpass.so nodelay

The following is the PAM configuration file for a particular Linux system. The default condition uses pam_pwdb.so.

#%PAM-1.0
# The PAM configuration file for the “samba” service
#
auth       required     pam_pwdb.so nullok nodelay shadow audit
account    required     pam_pwdb.so audit nodelay
session    required     pam_pwdb.so nodelay
password   required     pam_pwdb.so shadow md5

In the following example, the decision has been made to use the smbpasswd database even for basic Samba authentication. Such a decision could also be made for the passwd program and would thus allow the smbpasswd passwords to be changed using the passwd program:

#%PAM-1.0
# The PAM configuration file for the “samba” service
#
auth       required     pam_smbpass.so nodelay
account    required     pam_pwdb.so audit nodelay
session    required     pam_pwdb.so nodelay
password   required     pam_smbpass.so nodelay smbconf=/etc/samba.d/smb.conf

Note

PAM allows stacking of authentication mechanisms. It is also possible to pass information obtained within one PAM module through to the next module in the PAM stack. Please refer to the documentation for your particular system implementation for details regarding the specific capabilities of PAM in this environment. Some Linux implementations also provide the pam_stack.so module that allows all authentication to be configured in a single central file. The pam_stack.so method has some devoted followers on the basis that it allows for easier administration. As with all issues in life though, every decision makes trade-offs, so you may want to examine the PAM documentation for further helpful information.

smb.conf PAM Configuration

There is an option in smb.conf called obey pam restrictions. The following is from the online help for this option in SWAT;

When Samba is configured to enable PAM support (i.e., --with-pam), this parameter will control whether or not Samba should obey PAM's account and session management directives. The default behavior is to use PAM for cleartext authentication only and to ignore any account or session management. Samba always ignores PAM for authentication in the case of encrypt passwords = yes. The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption.

Default: obey pam restrictions = no

Remote CIFS Authentication Using winbindd.so

All operating systems depend on the provision of users credentials acceptable to the platform. UNIX requires the provision of a user identifier (UID) as well as a group identifier (GID). These are both simple integer type numbers that are obtained from a password backend such as /etc/passwd.

Users and groups on a Windows NT server are assigned a relative ID (RID) which is unique for the domain when the user or group is created. To convert the Windows NT user or group into a UNIX user or group, a mapping between RIDs and UNIX user and group IDs is required. This is one of the jobs that winbind performs.

As Winbind users and groups are resolved from a server, user and group IDs are allocated from a specified range. This is done on a first come, first served basis, although all existing users and groups will be mapped as soon as a client performs a user or group enumeration command. The allocated UNIX IDs are stored in a database file under the Samba lock directory and will be remembered.

The astute administrator will realize from this that the combination of pam_smbpass.so, winbindd and a distributed passdb backend, such as ldap, will allow the establishment of a centrally managed, distributed user/password database that can also be used by all PAM-aware (e.g., Linux) programs and applications. This arrangement can have particularly potent advantages compared with the use of Microsoft Active Directory Service (ADS) in so far as the reduction of wide area network authentication traffic.

Warning

The RID to UNIX ID database is the only location where the user and group mappings are stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd to determine which user and group IDs correspond to Windows NT user and group RIDs.

Password Synchronization Using pam_smbpass.so

pam_smbpass is a PAM module that can be used on conforming systems to keep the smbpasswd (Samba password) database in sync with the UNIX password file. PAM (Pluggable Authentication Modules) is an API supported under some UNIX operating systems, such as Solaris, HPUX and Linux, that provides a generic interface to authentication mechanisms.

This module authenticates a local smbpasswd user database. If you require support for authenticating against a remote SMB server, or if you are concerned about the presence of SUID root binaries on your system, it is recommended that you use pam_winbind instead.

Options recognized by this module are shown in .

Table 25.1. Options recognized by pam_smbpass

debuglog more debugging info.
auditlike debug, but also logs unknown usernames.
use_first_passdo not prompt the user for passwords; take them from PAM_ items instead.
try_first_passtry to get the password from a previous PAM module fall back to prompting the user.
use_authtoklike try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set (intended for stacking password modules only).
not_set_passdo not make passwords used by this module available to other modules.
nodelaydo not insert ~1 second delays on authentication failure.
nulloknull passwords are allowed.
nonullnull passwords are not allowed. Used to override the Samba configuration.
migrateonly meaningful in an “auth” context; used to update smbpasswd file with a password used for successful authentication.
smbconf=filespecify an alternate path to the smb.conf file.

The following are examples of the use of pam_smbpass.so in the format of Linux /etc/pam.d/ files structure. Those wishing to implement this tool on other platforms will need to adapt this appropriately.

Password Synchronization Configuration

A sample PAM configuration that shows the use of pam_smbpass to make sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow) is changed. Useful when an expired password might be changed by an application (such as ssh).

#%PAM-1.0
# password-sync
#
auth       requisite    pam_nologin.so
auth       required     pam_UNIX.so
account    required     pam_UNIX.so
password   requisite    pam_cracklib.so retry=3
password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
password   required     pam_smbpass.so nullok use_authtok try_first_pass
session    required     pam_UNIX.so

Password Migration Configuration

A sample PAM configuration that shows the use of pam_smbpass to migrate from plaintext to encrypted passwords for Samba. Unlike other methods, this can be used for users who have never connected to Samba shares: password migration takes place when users ftp in, login using ssh, pop their mail, and so on.

#%PAM-1.0
# password-migration
#
auth       requisite   pam_nologin.so
# pam_smbpass is called IF pam_UNIX succeeds.
auth       requisite   pam_UNIX.so
auth       optional    pam_smbpass.so migrate
account    required    pam_UNIX.so
password   requisite   pam_cracklib.so retry=3
password   requisite   pam_UNIX.so shadow md5 use_authtok try_first_pass
password   optional    pam_smbpass.so nullok use_authtok try_first_pass
session    required    pam_UNIX.so

Mature Password Configuration

A sample PAM configuration for a mature smbpasswd installation. private/smbpasswd is fully populated, and we consider it an error if the SMB password does not exist or does not match the UNIX password.

#%PAM-1.0
# password-mature
#
auth       requisite    pam_nologin.so
auth       required     pam_UNIX.so
account    required     pam_UNIX.so
password   requisite    pam_cracklib.so retry=3
password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
password   required     pam_smbpass.so use_authtok use_first_pass
session    required     pam_UNIX.so

Kerberos Password Integration Configuration

A sample PAM configuration that shows pam_smbpass used together with pam_krb5. This could be useful on a Samba PDC that is also a member of a Kerberos realm.

#%PAM-1.0
# kdc-pdc
#
auth       requisite   pam_nologin.so
auth       requisite   pam_krb5.so
auth       optional    pam_smbpass.so migrate
account    required    pam_krb5.so
password   requisite   pam_cracklib.so retry=3
password   optional    pam_smbpass.so nullok use_authtok try_first_pass
password   required    pam_krb5.so use_authtok try_first_pass
session    required    pam_krb5.so

Common Errors

PAM can be fickle and sensitive to configuration glitches. Here we look at a few cases from the Samba mailing list.

pam_winbind Problem

A user reported: I have the following PAM configuration:

auth required /lib/security/pam_securetty.so
auth sufficient /lib/security/pam_winbind.so
auth sufficient /lib/security/pam_UNIX.so use_first_pass nullok
auth required /lib/security/pam_stack.so service=system-auth
auth required /lib/security/pam_nologin.so
account required /lib/security/pam_stack.so service=system-auth
account required /lib/security/pam_winbind.so
password required /lib/security/pam_stack.so service=system-auth

When I open a new console with [ctrl][alt][F1], I can't log in with my user “pitie”. I have tried with user “scienceu+pitie” also.

Answer: The problem may lie with your inclusion of pam_stack.so service=system-auth. That file often contains a lot of stuff that may duplicate what you are already doing. Try commenting out the pam_stack lines for auth and account and see if things work. If they do, look at /etc/pam.d/system-auth and copy only what you need from it into your /etc/pam.d/login file. Alternately, if you want all services to use Winbind, you can put the Winbind-specific stuff in /etc/pam.d/system-auth.

Winbind Is Not Resolving Users and Groups

My smb.conf file is correctly configured. I have specified idmap uid = 12000, and idmap gid = 3000-3500 and winbind is running. When I do the following it all works fine.

root# wbinfo -u
MIDEARTH+maryo
MIDEARTH+jackb
MIDEARTH+ameds
...
MIDEARTH+root

root# wbinfo -g
MIDEARTH+Domain Users
MIDEARTH+Domain Admins
MIDEARTH+Domain Guests
...
MIDEARTH+Accounts

root# getent passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/bash
...
maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false

But this command fails:

root# chown maryo a_file
chown: 'maryo': invalid user

This is driving me nuts! What can be wrong?

Answer: Your system is likely running nscd, the name service caching daemon. Shut it down, do not restart it! You will find your problem resolved.

Chapter 26. Integrating MS Windows Networks with Samba

John H. Terpstra

Samba Team

(Jan 01 2001)

This section deals with NetBIOS over TCP/IP name to IP address resolution. If your MS Windows clients are not configured to use NetBIOS over TCP/IP, then this section does not apply to your installation. If your installation involves the use of NetBIOS over TCP/IP then this section may help you to resolve networking problems.

Note

NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS over Logical Link Control (LLC). On modern networks it is highly advised to not run NetBEUI at all. Note also there is no such thing as NetBEUI over TCP/IP the existence of such a protocol is a complete and utter misapprehension.

Features and Benefits

Many MS Windows network administrators have never been exposed to basic TCP/IP networking as it is implemented in a UNIX/Linux operating system. Likewise, many UNIX and Linux administrators have not been exposed to the intricacies of MS Windows TCP/IP-based networking (and may have no desire to be either).

This chapter gives a short introduction to the basics of how a name can be resolved to its IP address for each operating system environment.

Background Information

Since the introduction of MS Windows 2000, it is possible to run MS Windows networking without the use of NetBIOS over TCP/IP. NetBIOS over TCP/IP uses UDP port 137 for NetBIOS name resolution and uses TCP port 139 for NetBIOS session services. When NetBIOS over TCP/IP is disabled on MS Windows 2000 and later clients, then only the TCP port 445 will be used and the UDP port 137 and TCP port 139 will not.

Note

When using Windows 2000 or later clients, if NetBIOS over TCP/IP is not disabled, then the client will use UDP port 137 (NetBIOS Name Service, also known as the Windows Internet Name Service or WINS), TCP port 139 and TCP port 445 (for actual file and print traffic).

When NetBIOS over TCP/IP is disabled, the use of DNS is essential. Most installations that disable NetBIOS over TCP/IP today use MS Active Directory Service (ADS). ADS requires Dynamic DNS with Service Resource Records (SRV RR) and with Incremental Zone Transfers (IXFR). Use of DHCP with ADS is recommended as a further means of maintaining central control over the client workstation network configuration.

Name Resolution in a Pure UNIX/Linux World

The key configuration files covered in this section are:

  • /etc/hosts

  • /etc/resolv.conf

  • /etc/host.conf

  • /etc/nsswitch.conf

/etc/hosts

This file contains a static list of IP addresses and names.

127.0.0.1	localhost localhost.localdomain
192.168.1.1	bigbox.quenya.org	bigbox	alias4box

The purpose of /etc/hosts is to provide a name resolution mechanism so uses do not need to remember IP addresses.

Network packets that are sent over the physical network transport layer communicate not via IP addresses but rather using the Media Access Control address, or MAC address. IP addresses are currently 32 bits in length and are typically presented as four (4) decimal numbers that are separated by a dot (or period). For example, 168.192.1.1.

MAC Addresses use 48 bits (or 6 bytes) and are typically represented as two-digit hexadecimal numbers separated by colons: 40:8e:0a:12:34:56.

Every network interface must have a MAC address. Associated with a MAC address may be one or more IP addresses. There is no relationship between an IP address and a MAC address; all such assignments are arbitrary or discretionary in nature. At the most basic level, all network communications take place using MAC addressing. Since MAC addresses must be globally unique and generally remain fixed for any particular interface, the assignment of an IP address makes sense from a network management perspective. More than one IP address can be assigned per MAC address. One address must be the primary IP address this is the address that will be returned in the ARP reply.

When a user or a process wants to communicate with another machine, the protocol implementation ensures that the “machine name” or “host name” is resolved to an IP address in a manner that is controlled by the TCP/IP configuration control files. The file /etc/hosts is one such file.

When the IP address of the destination interface has been determined, a protocol called ARP/RARP is used to identify the MAC address of the target interface. ARP stands for Address Resolution Protocol and is a broadcast-oriented method that uses User Datagram Protocol (UDP) to send a request to all interfaces on the local network segment using the all 1s MAC address. Network interfaces are programmed to respond to two MAC addresses only; their own unique address and the address ff:ff:ff:ff:ff:ff. The reply packet from an ARP request will contain the MAC address and the primary IP address for each interface.

The /etc/hosts file is foundational to all UNIX/Linux TCP/IP installations and as a minimum will contain the localhost and local network interface IP addresses and the primary names by which they are known within the local machine. This file helps to prime the pump so a basic level of name resolution can exist before any other method of name resolution becomes available.

/etc/resolv.conf

This file tells the name resolution libraries:

  • The name of the domain to which the machine belongs.

  • The name(s) of any domains that should be automatically searched when trying to resolve unqualified host names to their IP address.

  • The name or IP address of available Domain Name Servers that may be asked to perform name-to-address translation lookups.

/etc/host.conf

/etc/host.conf is the primary means by which the setting in /etc/resolv.conf may be effected. It is a critical configuration file. This file controls the order by which name resolution may proceed. The typical structure is:

order hosts,bind
multi on

then both addresses should be returned. Please refer to the man page for host.conf for further details.

/etc/nsswitch.conf

This file controls the actual name resolution targets. The file typically has resolver object specifications as follows:

# /etc/nsswitch.conf
#
# Name Service Switch configuration file.
#

passwd:		compat
# Alternative entries for password authentication are:
# passwd:	compat files nis ldap winbind
shadow:		compat
group:		compat

hosts:		files nis dns
# Alternative entries for host name resolution are:
# hosts:	files dns nis nis+ hesiod db compat ldap wins
networks:	nis files dns

ethers:		nis files
protocols:	nis files
rpc:		nis files
services:	nis files

Of course, each of these mechanisms requires that the appropriate facilities and/or services are correctly configured.

It should be noted that unless a network request/message must be sent, TCP/IP networks are silent. All TCP/IP communications assume a principal of speaking only when necessary.

Starting with version 2.2.0, Samba has Linux support for extensions to the name service switch infrastructure so Linux clients will be able to obtain resolution of MS Windows NetBIOS names to IP Addresses. To gain this functionality, Samba needs to be compiled with appropriate arguments to the make command (i.e., make nsswitch/libnss_wins.so). The resulting library should then be installed in the /lib directory and the wins parameter needs to be added to the “hosts:” line in the /etc/nsswitch.conf file. At this point, it will be possible to ping any MS Windows machine by its NetBIOS machine name, as long as that machine is within the workgroup to which both the Samba machine and the MS Windows machine belong.

Name Resolution as Used within MS Windows Networking

MS Windows networking is predicated about the name each machine is given. This name is known variously (and inconsistently) as the “computer name,” “machine name,” “networking name,” “netbios name,” or “SMB name.” All terms mean the same thing with the exception of “netbios name” that can also apply to the name of the workgroup or the domain name. The terms “workgroup” and “domain” are really just a simple name with which the machine is associated. All NetBIOS names are exactly 16 characters in length. The 16th character is reserved. It is used to store a one-byte value that indicates service level information for the NetBIOS name that is registered. A NetBIOS machine name is, therefore, registered for each service type that is provided by the client/server.

and list typical NetBIOS name/service type registrations.

Table 26.1. Unique NetBIOS Names

MACHINENAME<00>Server Service is running on MACHINENAME
MACHINENAME<03>Generic Machine Name (NetBIOS name)
MACHINENAME<20>LanMan Server service is running on MACHINENAME
WORKGROUP<1b>Domain Master Browser

Table 26.2. Group Names

WORKGROUP<03>Generic Name registered by all members of WORKGROUP
WORKGROUP<1c>Domain Controllers / Netlogon Servers
WORKGROUP<1d>Local Master Browsers
WORKGROUP<1e>Internet Name Resolvers

It should be noted that all NetBIOS machines register their own names as per the above. This is in vast contrast to TCP/IP installations where traditionally the system administrator will determine in the /etc/hosts or in the DNS database what names are associated with each IP address.

One further point of clarification should be noted. The /etc/hosts file and the DNS records do not provide the NetBIOS name type information that MS Windows clients depend on to locate the type of service that may be needed. An example of this is what happens when an MS Windows client wants to locate a domain logon server. It finds this service and the IP address of a server that provides it by performing a lookup (via a NetBIOS broadcast) for enumeration of all machines that have registered the name type *<1c>. A logon request is then sent to each IP address that is returned in the enumerated list of IP addresses. Whichever machine first replies, it then ends up providing the logon services.

The name “workgroup” or “domain” really can be confusing since these have the added significance of indicating what is the security architecture of the MS Windows network. The term “workgroup” indicates that the primary nature of the network environment is that of a peer-to-peer design. In a WORKGROUP, all machines are responsible for their own security, and generally such security is limited to the use of just a password (known as Share Level security). In most situations with peer-to-peer networking, the users who control their own machines will simply opt to have no security at all. It is possible to have User Level Security in a WORKGROUP environment, thus requiring the use of a user name and a matching password.

MS Windows networking is thus predetermined to use machine names for all local and remote machine message passing. The protocol used is called Server Message Block (SMB) and this is implemented using the NetBIOS protocol (Network Basic Input Output System). NetBIOS can be encapsulated using LLC (Logical Link Control) protocol in which case the resulting protocol is called NetBEUI (Network Basic Extended User Interface). NetBIOS can also be run over IPX (Internetworking Packet Exchange) protocol as used by Novell NetWare, and it can be run over TCP/IP protocols in which case the resulting protocol is called NBT or NetBT, the NetBIOS over TCP/IP.

MS Windows machines use a complex array of name resolution mechanisms. Since we are primarily concerned with TCP/IP, this demonstration is limited to this area.

The NetBIOS Name Cache

All MS Windows machines employ an in-memory buffer in which is stored the NetBIOS names and IP addresses for all external machines that machine has communicated with over the past 10-15 minutes. It is more efficient to obtain an IP address for a machine from the local cache than it is to go through all the configured name resolution mechanisms.

If a machine whose name is in the local name cache has been shut down before the name had been expired and flushed from the cache, then an attempt to exchange a message with that machine will be subject to time-out delays. Its name is in the cache, so a name resolution lookup will succeed, but the machine cannot respond. This can be frustrating for users but is a characteristic of the protocol.

The MS Windows utility that allows examination of the NetBIOS name cache is called “nbtstat”. The Samba equivalent of this is called nmblookup.

The LMHOSTS File

This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in the directory C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address and the machine name in matched pairs. The LMHOSTS file performs NetBIOS name to IP address mapping.

It typically looks like this:

# Copyright (c) 1998 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft Wins Client (NetBIOS
# over TCP/IP) stack for Windows98
#
# This file contains the mappings of IP addresses to NT computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
#      #PRE
#      #DOM:<domain>
#      #INCLUDE <filename>
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This effects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addition the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\
# parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97     rhino     #PRE #DOM:networking  #net group's DC
# 102.54.94.102    "appname  \0x14"       #special app server
# 102.54.94.123    popular   #PRE         #source server
# 102.54.94.117    localsrv  #PRE         #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.

HOSTS File

This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in the directory C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address and the IP hostname in matched pairs. It can be used by the name resolution infrastructure in MS Windows, depending on how the TCP/IP environment is configured. This file is in every way the equivalent of the UNIX/Linux /etc/hosts file.

DNS Lookup

This capability is configured in the TCP/IP setup area in the network configuration facility. If enabled, an elaborate name resolution sequence is followed, the precise nature of which is dependant on how the NetBIOS Node Type parameter is configured. A Node Type of 0 means that NetBIOS broadcast (over UDP broadcast) is used if the name that is the subject of a name lookup is not found in the NetBIOS name cache. If that fails then DNS, HOSTS and LMHOSTS are checked. If set to Node Type 8, then a NetBIOS Unicast (over UDP Unicast) is sent to the WINS Server to obtain a lookup before DNS, HOSTS, LMHOSTS, or broadcast lookup is used.

WINS Lookup

A WINS (Windows Internet Name Server) service is the equivalent of the rfc1001/1002 specified NBNS (NetBIOS Name Server). A WINS server stores the names and IP addresses that are registered by a Windows client if the TCP/IP setup has been given at least one WINS Server IP Address.

To configure Samba to be a WINS server, the following parameter needs to be added to the smb.conf file:

wins support = Yes

To configure Samba to use a WINS server, the following parameters are needed in the smb.conf file:

wins support = No
wins server = xxx.xxx.xxx.xxx

where xxx.xxx.xxx.xxx is the IP address of the WINS server.

For information about setting up Samba as a WINS server, read .

Common Errors

TCP/IP network configuration problems find every network administrator sooner or later. The cause can be anything from keyboard mishaps, forgetfulness, simple mistakes, and carelessness. Of course, no one is ever deliberately careless!

Pinging Works Only in One Way

I can ping my Samba server from Windows, but I cannot ping my Windows machine from the Samba server.

Answer: The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the Samba server (Linux) was at IP Address 192.168.1.130 with netmask 255.255.255.128. The machines were on a local network with no external connections.

Due to inconsistent netmasks, the Windows machine was on network 192.168.1.0/24, while the Samba server was on network 192.168.1.128/25 logically a different network.

Very Slow Network Connections

A common cause of slow network response includes:

  • Client is configured to use DNS and the DNS server is down.

  • Client is configured to use remote DNS server, but the remote connection is down.

  • Client is configured to use a WINS server, but there is no WINS server.

  • Client is not configured to use a WINS server, but there is a WINS server.

  • Firewall is filtering our DNS or WINS traffic.

Samba Server Name Change Problem

The name of the Samba server was changed, Samba was restarted, Samba server cannot be pinged by new name from MS Windows NT4 Workstation, but it does still respond to ping using the old name. Why?

From this description, three things are obvious:

  • WINS is not in use, only broadcast-based name resolution is used.

  • The Samba server was renamed and restarted within the last 10-15 minutes.

  • The old Samba server name is still in the NetBIOS name cache on the MS Windows NT4 Workstation.

To find what names are present in the NetBIOS name cache on the MS Windows NT4 machine, open a cmd shell and then:

C:\> nbtstat -n

              NetBIOS Local Name Table

   Name                 Type          Status
------------------------------------------------
FRODO            <03>  UNIQUE      Registered
ADMINSTRATOR     <03>  UNIQUE      Registered
FRODO            <00>  UNIQUE      Registered
SARDON           <00>  GROUP       Registered
FRODO            <20>  UNIQUE      Registered
FRODO            <1F>  UNIQUE      Registered


C:\> nbtstat -c

             NetBIOS Remote Cache Name Table

   Name                 Type       Host Address     Life [sec]
--------------------------------------------------------------
GANDALF	<20>  UNIQUE      192.168.1.1          240

C:\> 

In the above example, GANDALF is the Samba server and FRODO is the MS Windows NT4 Workstation. The first listing shows the contents of the Local Name Table (i.e., Identity information on the MS Windows workstation) and the second shows the NetBIOS name in the NetBIOS name cache. The name cache contains the remote machines known to this workstation.

Chapter 27. Unicode/Charsets

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

TAKAHASHI Motonobu

25 March 2003

Features and Benefits

Every industry eventually matures. One of the great areas of maturation is in the focus that has been given over the past decade to make it possible for anyone anywhere to use a computer. It has not always been that way, in fact, not so long ago it was common for software to be written for exclusive use in the country of origin.

Of all the effort that has been brought to bear on providing native language support for all computer users, the efforts of the Openi18n organization is deserving of special mention.

Samba-2.x supported a single locale through a mechanism called codepages. Samba-3 is destined to become a truly trans-global file and printer-sharing platform.

What Are Charsets and Unicode?

Computers communicate in numbers. In texts, each number will be translated to a corresponding letter. The meaning that will be assigned to a certain number depends on the character set (charset) that is used.

A charset can be seen as a table that is used to translate numbers to letters. Not all computers use the same charset (there are charsets with German umlauts, Japanese characters, and so on). Usually a charset contains 256 characters, which means that storing a character with it takes exactly one byte.

There are also charsets that support even more characters, but those need twice as much storage space (or more). These charsets can contain 256 * 256 = 65536 characters, which is more than all possible characters one could think of. They are called multibyte charsets because they use more then one byte to store one character.

A standardized multibyte charset is unicode. A big advantage of using a multibyte charset is that you only need one; there is no need to make sure two computers use the same charset when they are communicating.

Old Windows clients use single-byte charsets, named codepages, by Microsoft. However, there is no support for negotiating the charset to be used in the SMB/CIFS protocol. Thus, you have to make sure you are using the same charset when talking to an older client. Newer clients (Windows NT, 200x, XP) talk unicode over the wire.

Samba and Charsets

As of Samba-3.0, Samba can (and will) talk unicode over the wire. Internally, Samba knows of three kinds of character sets:

unix charset

This is the charset used internally by your operating system. The default is UTF-8, which is fine for most systems, which covers all characters in all languages. The default in previous Samba releases was ASCII.

display charset

This is the charset Samba will use to print messages on your screen. It should generally be the same as the unix charset.

dos charset

This is the charset Samba uses when communicating with DOS and Windows 9x/Me clients. It will talk unicode to all newer clients. The default depends on the charsets you have installed on your system. Run testparm -v | grep "dos charset" to see what the default is on your system.

Conversion from Old Names

Because previous Samba versions did not do any charset conversion, characters in filenames are usually not correct in the UNIX charset but only for the local charset used by the DOS/Windows clients.

Japanese Charsets

Samba does not work correctly with Japanese charsets yet. Here are points of attention when setting it up:

  • You should set mangling method = hash

  • There are various iconv() implementations around and not all of them work equally well. glibc2's iconv() has a critical problem in CP932. libiconv-1.8 works with CP932 but still has some problems and does not work with EUC-JP.

  • You should set dos charset = CP932, not Shift_JIS, SJIS.

  • Currently only UNIX charset = CP932 will work (but still has some problems...) because of iconv() issues. UNIX charset = EUC-JP does not work well because of iconv() issues.

  • Currently Samba-3.0 does not support UNIX charset = UTF8-MAC/CAP/HEX/JIS*.

More information (in Japanese) is available at: http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html.

Common Errors

CP850.so Can't Be Found

Samba is complaining about a missing CP850.so file.

Answer: CP850 is the default dos charset. The dos charset is used to convert data to the codepage used by your dos clients. If you do not have any dos clients, you can safely ignore this message.

CP850 should be supported by your local iconv implementation. Make sure you have all the required packages installed. If you compiled Samba from source, make sure to configure found iconv.

Chapter 28. Samba Backup Techniques

John H. Terpstra

Samba Team

Table of Contents

Note
Features and Benefits

Note

This chapter did not make it into this release. It is planned for the published release of this document.

Features and Benefits

We need feedback from people who are backing up samba servers. We would like to know what software tools you are using to backup your samba server/s.

In particular, if you have any success and / or failure stories you could share with other users this would be appreciated.

Chapter 29. High Availability Options

John H. Terpstra

Samba Team

Table of Contents

Note

Note

This chapter did not make it into this release. It is planned for the published release of this document.

Migration and Updating

Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Gerald (Jerry) Carter

Samba Team

June 30, 2003

This chapter deals exclusively with the differences between Samba-3.0.0 and Samba-2.2.8a. It points out where configuration parameters have changed, and provides a simple guide for the move from 2.2.x to 3.0.0.

Quick Migration Guide

Samba-3.0.0 default behavior should be approximately the same as Samba-2.2.x. The default behavior when the new parameter passdb backend is not defined in the smb.conf file provides the same default behviour as Samba-2.2.x with encrypt passwords = Yes, and will use the smbpasswd database.

So why say that behavior should be approximately the same as Samba-2.2.x? Because Samba-3.0.0 can negotiate new protocols, such as support for native Unicode, that may result in differing protocol code paths being taken. The new behavior under such circumstances is not exactly the same as the old one. The good news is that the domain and machine SIDs will be preserved across the upgrade.

If the Samba-2.2.x system was using an LDAP backend, and there is no time to update the LDAP database, then make sure that passdb backend = ldapsam_compat is specified in the smb.conf file. For the rest, behavior should remain more or less the same. At a later date, when there is time to implement a new Samba-3 compatible LDAP backend, it is possible to migrate the old LDAP database to the new one through use of the pdbedit. See .

New Features in Samba-3

The major new features are:

  1. Active Directory support. This release is able to join an ADS realm as a member server and authenticate users using LDAP/kerberos.

  2. Unicode support. Samba will now negotiate unicode on the wire and internally there is a much better infrastructure for multi-byte and unicode character sets.

  3. New authentication system. The internal authentication system has been almost completely rewritten. Most of the changes are internal, but the new authoring system is also very configurable.

  4. New filename mangling system. The filename mangling system has been completely rewritten. An internal database now stores mangling maps persistently.

  5. New “net” command. A new “net” command has been added. It is somewhat similar to the “net” command in Windows. Eventually, we plan to replace a bunch of other utilities (such as smbpasswd) with subcommands in “net”.

  6. Samba now negotiates NT-style status32 codes on the wire. This considerably improves error handling.

  7. Better Windows 200x/XP printing support including publishing printer attributes in Active Directory.

  8. New loadable RPC modules for passdb backends and character sets.

  9. New default dual-daemon winbindd support for better performance.

  10. Support for migrating from a Windows NT 4.0 domain to a Samba domain and maintaining user, group and domain SIDs.

  11. Support for establishing trust relationships with Windows NT 4.0 Domain Controllers.

  12. Initial support for a distributed Winbind architecture using an LDAP directory for storing SID to UID/GID mappings.

  13. Major updates to the Samba documentation tree.

  14. Full support for client and server SMB signing to ensure compatibility with default Windows 2003 security settings.

Plus lots of other improvements!

Configuration Parameter Changes

This section contains a brief listing of changes to smb.conf options in the 3.0.0 release. Please refer to the smb.conf(5) man page for complete descriptions of new or modified parameters.

Removed Parameters

(Ordered Alphabetically):

  • admin log

  • alternate permissions

  • character set

  • client codepage

  • code page directory

  • coding system

  • domain admin group

  • domain guest group

  • force unknown acl user

  • nt smb support

  • post script

  • printer driver

  • printer driver file

  • printer driver location

  • status

  • stip dot

  • total print jobs

  • use rhosts

  • valid chars

  • vfs options

New Parameters

(New parameters have been grouped by function):

Remote Management

  • abort shutdown script

  • shutdown script

User and Group Account Management:

  • add group script

  • add machine script

  • add user to group script

  • algorithmic rid base

  • delete group script

  • delete user from group script

  • passdb backend

  • set primary group script

Authentication:

  • auth methods

  • realm

Protocol Options:

  • client lanman auth

  • client NTLMv2 auth

  • client schannel

  • client signing

  • client use spnego

  • disable netbios

  • ntlm auth

  • paranoid server security

  • server schannel

  • server signing

  • smb ports

  • use spnego

File Service:

  • get quota command

  • hide special files

  • hide unwriteable files

  • hostname lookups

  • kernel change notify

  • mangle prefix

  • map acl inherit

  • msdfs proxy

  • set quota command

  • use sendfile

  • vfs objects

Printing:

  • max reported print jobs

Unicode and Character Sets:

  • display charset

  • dos charset

  • unicode

  • UNIX charset

SID to UID/GID Mappings:

  • idmap backend

  • idmap gid

  • idmap uid

  • winbind enable local accounts

  • winbind trusted domains only

  • template primary group

  • enable rid algorithm

LDAP:

  • ldap delete dn

  • ldap group suffix

  • ldap idmap suffix

  • ldap machine suffix

  • ldap passwd sync

  • ldap trust ids

  • ldap user suffix

General Configuration:

  • preload modules

  • privatedir

Modified Parameters (Changes in Behavior):

  • encrypt passwords (enabled by default)

  • mangling method (set to hash2 by default)

  • passwd chat

  • passwd program

  • password server

  • restrict anonymous (integer value)

  • security (new ads value)

  • strict locking (enabled by default)

  • winbind cache time (increased to 5 minutes)

  • winbind uid (deprecated in favor of idmap uid)

  • winbind gid (deprecated in favor of idmap gid)

New Functionality

Databases

This section contains brief descriptions of any new databases introduced in Samba-3. Please remember to backup your existing ${lock directory}/*tdb before upgrading to Samba-3. Samba will upgrade databases as they are opened (if necessary), but downgrading from 3.0 to 2.2 is an unsupported path.

The new tdb files are described in .

Table 30.1. TDB File Descriptions

NameDescriptionBackup?
account_policyUser policy settingsyes
gencacheGeneric caching dbno
group_mapping

Mapping table from Windows groups/SID to UNIX groups

yes
idmap

new ID map table from SIDS to UNIX UIDs/GIDs

yes
namecacheName resolution cache entriesno
netlogon_unigrp

Cache of universal group membership obtained when operating as a member of a Windows domain

no
printing/*.tdb

Cached output from `lpq command' created on a per print service basis

no
registry

Read-only Samba registry skeleton that provides support for exporting various db tables via the winreg RPCs

no

Changes in Behavior

The following issues are known changes in behavior between Samba-2.2 and Samba-3 that may affect certain installations of Samba.

  1. When operating as a member of a Windows domain, Samba-2.2 would map any users authenticated by the remote DC to the “guest account” if a uid could not be obtained via the getpwnam() call. Samba-3 rejects the connection as NT_STATUS_LOGON_FAILURE. There is no current work around to re-establish the Samba-2.2 behavior.

  2. When adding machines to a Samba-2.2 controlled domain, the “add user script” was used to create the UNIX identity of the Machine Trust Account. Samba-3 introduces a new “add machine script” that must be specified for this purpose. Samba-3 will not fall back to using the “add user script” in the absence of an “add machine script”.

Charsets

You might experience problems with special characters when communicating with old DOS clients. Codepage support has changed in Samba-3. Read , for details.

Passdb Backends and Authentication

There have been a few new changes that Samba administrators should be aware of when moving to Samba-3.

  1. Encrypted passwords have been enabled by default in order to interoperate better with out-of-the-box Windows client installations. This does mean that either (a) a Samba account must be created for each user, or (b) “encrypt passwords = no” must be explicitly defined in smb.conf.

  2. Inclusion of new security = ads option for integration with an Active Directory domain using the native Windows Kerberos 5 and LDAP protocols.

Samba-3 also includes the possibility of setting up chains of authentication methods (auth methods) and account storage backends (passdb backend). Please refer to the smb.conf man page and , for details. While both parameters assume sane default values, it is likely that you will need to understand what the values actually mean in order to ensure Samba operates correctly.

Certain functions of the smbpasswd tool have been split between the new smbpasswd utility, the net tool and the new pdbedit utility. See the respective man pages for details.

LDAP

This section outlines the new features effecting Samba/LDAP integration.

New Schema

A new object class (sambaSamAccount) has been introduced to replace the old sambaAccount. This change aids us in the renaming of attributes to prevent clashes with attributes from other vendors. There is a conversion script (examples/LDAP/convertSambaAccount) to modify an LDIF file to the new schema.

Example:

		$ ldapsearch .... -b "ou=people,dc=..." > old.ldif
		$ convertSambaAccount <DOM SID> old.ldif new.ldif
		

The <DOM SID> can be obtained by running

$ net getlocalsid <DOMAINNAME>

on the Samba PDC as root.

The old sambaAccount schema may still be used by specifying the ldapsam_compat passdb backend. However, the sambaAccount and associated attributes have been moved to the historical section of the schema file and must be uncommented before use if needed. The Samba-2.2 object class declaration for a sambaAccount has not changed in the Samba-3 samba.schema file.

Other new object classes and their uses include:

  • sambaDomain domain information used to allocate RIDs for users and groups as necessary. The attributes are added in “ldap suffix” directory entry automatically if an idmap UID/GID range has been set and the “ldapsam” passdb backend has been selected.

  • sambaGroupMapping an object representing the relationship between a posixGroup and a Windows group/SID. These entries are stored in the “ldap group suffix” and managed by the “net groupmap” command.

  • sambaUNIXIdPool created in the “ldap idmap suffix” entry automatically and contains the next available “idmap UID” and “idmap GID”.

  • sambaIdmapEntry object storing a mapping between a SID and a UNIX UID/GID. These objects are created by the idmap_ldap module as needed.

New Suffix for Searching

The following new smb.conf parameters have been added to aid in directing certain LDAP queries when passdb backend = ldapsam://... has been specified.

  • ldap suffix used to search for user and computer accounts.

  • ldap user suffix used to store user accounts.

  • ldap machine suffix used to store Machine Trust Accounts.

  • ldap group suffix location of posixGroup/sambaGroupMapping entries.

  • ldap idmap suffix location of sambaIdmapEntry objects.

If an ldap suffix is defined, it will be appended to all of the remaining sub-suffix parameters. In this case, the order of the suffix listings in smb.conf is important. Always place the ldap suffix first in the list.

Due to a limitation in Samba's smb.conf parsing, you should not surround the DNs with quotation marks.

IdMap LDAP Support

Samba-3 supports an ldap backend for the idmap subsystem. The following options inform Samba that the idmap table should be stored on the directory server onterose in the "ou=idmap,dc=quenya,dc=org" partition.

[global]
...
idmap backend = ldap:ldap://onterose/
ldap idmap suffix = ou=idmap,dc=quenya,dc=org
idmap uid = 40000-50000
idmap gid = 40000-50000

This configuration allows Winbind installations on multiple servers to share a UID/GID number space, thus avoiding the interoperability problems with NFS that were present in Samba-2.2.

Chapter 31. Migration from NT4 PDC to Samba-3 PDC

John H. Terpstra

Samba Team

April 3, 2003

This is a rough guide to assist those wishing to migrate from NT4 Domain Control to Samba-3-based Domain Control.

Planning and Getting Started

In the IT world there is often a saying that all problems are encountered because of poor planning. The corollary to this saying is that not all problems can be anticipated and planned for. Then again, good planning will anticipate most show-stopper-type situations.

Those wishing to migrate from MS Windows NT4 Domain Control to a Samba-3 Domain Control environment would do well to develop a detailed migration plan. So here are a few pointers to help migration get under way.

Objectives

The key objective for most organizations will be to make the migration from MS Windows NT4 to Samba-3 Domain Control as painless as possible. One of the challenges you may experience in your migration process may well be one of convincing management that the new environment should remain in place. Many who have introduced open source technologies have experienced pressure to return to a Microsoft-based platform solution at the first sign of trouble.

Before attempting a migration to a Samba-3 controlled network, make every possible effort to gain all-round commitment to the change. Know precisely why the change is important for the organization. Possible motivations to make a change include:

  • Improve network manageability.

  • Obtain better user level functionality.

  • Reduce network operating costs.

  • Reduce exposure caused by Microsoft withdrawal of NT4 support.

  • Avoid MS License 6 implications.

  • Reduce organization's dependency on Microsoft.

Make sure everyone knows that Samba-3 is not MS Windows NT4. Samba-3 offers an alternative solution that is both different from MS Windows NT4 and offers advantages compared with it. Gain recognition that Samba-3 lacks many of the features that Microsoft has promoted as core values in migration from MS Windows NT4 to MS Windows 2000 and beyond (with or without Active Directory services).

What are the features that Samba-3 cannot provide?

  • Active Directory Server.

  • Group Policy Objects (in Active Directory).

  • Machine Policy Objects.

  • Logon Scripts in Active Directory.

  • Software Application and Access Controls in Active Directory.

The features that Samba-3 does provide and that may be of compelling interest to your site include:

  • Lower cost of ownership.

  • Global availability of support with no strings attached.

  • Dynamic SMB Servers (can run more than one SMB/CIFS server per UNIX/Linux system).

  • Creation of on-the-fly logon scripts.

  • Creation of on-the-fly Policy Files.

  • Greater stability, reliability, performance and availability.

  • Manageability via an ssh connection.

  • Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam).

  • Ability to implement a full single-sign-on architecture.

  • Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand.

Before migrating a network from MS Windows NT4 to Samba-3, consider all necessary factors. Users should be educated about changes they may experience so the change will be a welcome one and not become an obstacle to the work they need to do. The following are factors that will help ensure a successful migration:

Domain Layout

Samba-3 can be configured as a Domain Controller, a back-up Domain Controller (probably best called a secondary controller), a Domain Member, or as a stand-alone Server. The Windows network security domain context should be sized and scoped before implementation. Particular attention needs to be paid to the location of the primary Domain Controller (PDC) as well as backup controllers (BDCs). One way in which Samba-3 differs from Microsoft technology is that if one chooses to use an LDAP authentication backend, then the same database can be used by several different domains. In a complex organization, there can be a single LDAP database, which itself can be distributed (have a master server and multiple slave servers) that can simultaneously serve multiple domains.

>From a design perspective, the number of users per server as well as the number of servers per domain should be scaled taking into consideration server capacity and network bandwidth.

A physical network segment may house several domains. Each may span multiple network segments. Where domains span routed network segments, consider and test the performance implications of the design and layout of a network. A centrally located Domain Controller that is designed to serve multiple routed network segments may result in severe performance problems. Check the response time (ping timing) between the remote segment and the PDC. If it's long (more than 100 ms), locate a backup controller (BDC) on the remote segment to serve as the local authentication and access control server.

Server Share and Directory Layout

There are cardinal rules to effective network design that cannot be broken with impunity. The most important rule: Simplicity is king in every well-controlled network. Every part of the infrastructure must be managed; the more complex it is, the greater will be the demand of keeping systems secure and functional.

Keep in mind the nature of how data must be shared. Physical disk space layout should be considered carefully. Some data must be backed up. The simpler the disk layout the easier it will be to keep track of backup needs. Identify what backup media will meet your needs; consider backup to tape, CD-ROM or (DVD-ROM), or other offline storage medium. Plan and implement for minimum maintenance. Leave nothing to chance in your design; above all, do not leave backups to chance: Backup, test, and validate every backup, create a disaster recovery plan and prove that it works.

Users should be grouped according to data access control needs. File and directory access is best controlled via group permissions and the use of the “sticky bit” on group controlled directories may substantially avoid file access complaints from Samba share users.

Inexperienced network administrators often attempt elaborate techniques to set access controls on files, directories, shares, as well as in share definitions. Keep your design and implementation simple and document your design extensively. Have others audit your documentation. Do not create a complex mess that your successor will not understand. Remember, job security through complex design and implementation may cause loss of operations and downtime to users as the new administrator learns to untangle your knots. Keep access controls simple and effective and make sure that users will never be interrupted by obtuse complexity.

Logon Scripts

Logon scripts can help to ensure that all users gain the share and printer connections they need.

Logon scripts can be created on-the-fly so all commands executed are specific to the rights and privileges granted to the user. The preferred controls should be affected through group membership so group information can be used to create a custom logon script using the root preexec parameters to the NETLOGON share.

Some sites prefer to use a tool such as kixstart to establish a controlled user environment. In any case, you may wish to do a Google search for logon script process controls. In particular, you may wish to explore the use of the Microsoft KnowledgeBase article KB189105 that deals with how to add printers without user intervention via the logon script process.

Profile Migration/Creation

User and Group Profiles may be migrated using the tools described in the section titled Desktop Profile Management.

Profiles may also be managed using the Samba-3 tool profiles. This tool allows the MS Windows NT-style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file to be changed to the SID of the Samba-3 domain.

User and Group Accounts

It is possible to migrate all account settings from an MS Windows NT4 domain to Samba-3. Before attempting to migrate user and group accounts, it is STRONGLY advised to create in Samba-3 the groups that are present on the MS Windows NT4 domain AND to map them to suitable UNIX/Linux groups. By following this simple advice, all user and group attributes should migrate painlessly.

Steps in Migration Process

The approximate migration process is described below.

  • You have an NT4 PDC that has the users, groups, policies and profiles to be migrated.

  • Samba-3 set up as a DC with netlogon share, profile share, and so on. Configure the smb.conf file to fucntion as a BDC, i.e., domain master = No.

Procedure 31.1. The Account Migration Process

  1. Create a BDC account in the old NT4 domain for the Samba server using NT Server Manager.

    1. Samba must not be running.

  2. net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd

  3. net rpc vampire -S NT4PDC -U administrator%passwd

  4. pdbedit -L

    1. Note did the users migrate?

  5. Now assign each of the UNIX groups to NT groups: (It may be useful to copy this text to a script called initGroups.sh)

    #!/bin/bash
    #### Keep this as a shell script for future re-use
    			
    # First assign well known domain global groups
    net groupmap modify ntgroup="Domain Admins" unixgroup=root   rid=512
    net groupmap modify ntgroup="Domain Users"  unixgroup=users  rid=513
    net groupmap modify ntgroup="Domain Guests" unixgroup=nobody rid=514
    
    # Now for our added domain global groups
    net groupmap add ntgroup="Designers" unixgroup=designers type=d rid=3200
    net groupmap add ntgroup="Engineers" unixgroup=engineers type=d rid=3210
    net groupmap add ntgroup="QA Team"   unixgroup=qateam    type=d rid=3220
    

  6. net groupmap list

    1. Check that all groups are recognized.

Migrate all the profiles, then migrate all policy files.

Migration Options

Sites that wish to migrate from MS Windows NT4 Domain Control to a Samba-based solution generally fit into three basic categories. shows the possibilities.

Table 31.1. The Three Major Site Types

Number of UsersDescription
< 50

Want simple conversion with no pain.

50 - 250

Want new features, can manage some in-house complexity.

> 250

Solution/Implementation must scale well, complex needs. Cross-departmental decision process. Local expertise in most areas.

Planning for Success

There are three basic choices for sites that intend to migrate from MS Windows NT4 to Samba-3:

  • Simple conversion (total replacement).

  • Upgraded conversion (could be one of integration).

  • Complete redesign (completely new solution).

Minimize down-stream problems by:

  • Taking sufficient time.

  • Avoiding Panic.

  • Testing all assumptions.

  • Testing the full roll-out program, including workstation deployment.

lists the conversion choices given the type of migration being contemplated.

Table 31.2. Nature of the Conversion Choices

SimpleUpgradedRedesign

Make use of minimal OS specific features.

Translate NT4 features to new host OS features.

Decide:

Move all accounts from NT4 into Samba-3

Copy and improve

Authentication regime (database location and access)

Make least number of operational changes

Make progressive improvements

Desktop management methods

Take least amount of time to migrate

Minimize user impact

Better control of Desktops/Users

Live versus isolated conversion

Maximize functionality

Identify Needs for: Manageability, Scalability, Security, Availability

Integrate Samba-3 then migrate while users are active, then change of control (swap out)

Take advantage of lower maintenance opportunity

Samba-3 Implementation Choices

Authentication Database/Backend

Samba-3 can use an external authentication backend:

  • Winbind (external Samba or NT4/200x server).

  • External server could use Active Directory or NT4 Domain.

  • Can use pam_mkhomedir.so to auto-create home dirs.

  • Samba-3 can use a local authentication backend: smbpasswd, tdbsam, ldapsam, mysqlsam

Access Control Points

Samba permits Access Control Points to be set:

  • On the share itself using Share ACLs.

  • On the file system using UNIX permissions on files and directories.

    Note: Can enable Posix ACLs in file system also.

  • Through Samba share parameters not recommended except as last resort.

Policies (migrate or create new ones)

Exercise great caution when affecting registry changes, use the right tool and be aware that changes made through NT4-style NTConfig.POL files can leave permanent changes.

  • Using Group Policy Editor (NT4).

  • Watch out for Tattoo effect.

User and Group Profiles

Platform-specific so use platform tool to change from a Local to a Roaming profile. Can use new profiles tool to change SIDs (NTUser.DAT).

Logon Scripts

Know how they work.

User and Group Mapping to UNIX/Linux

User and Group mapping code is new. Many problems have been experienced as network administrators who are familiar with Samba-2.2.x migrate to Samba-3. Carefully study the chapters that document the new password backend behavior and the new group mapping functionality.

  • The username map facility may be needed.

  • Use net groupmap to connect NT4 groups to UNIX groups.

  • Use pdbedit to set/change user configuration.

    When migrating to LDAP backend, it may be easier to dump the initial LDAP database to LDIF, edit, then reload into LDAP.

OS Specific Scripts/Programs may be Needed

Every operating system has its peculiarities. These are the result of engineering decisions that were based on the experience of the designer, and may have side-effects that were not anticipated. Limitations that may bite the Windows network administrator include:

  • Add/Delete Users: Note OS limits on size of name (Linux 8 chars) NT4 up to 254 chars.

  • Add/Delete Machines: Applied only to Domain Members (Note: machine names may be limited to 16 characters).

  • Use net groupmap to connect NT4 groups to UNIX groups.

  • Add/Delete Groups: Note OS limits on size and nature. Linux limit is 16 char, no spaces and no upper case chars (groupadd).

Migration Tools

Domain Control (NT4 Style) Profiles, Policies, Access Controls, Security

  • Samba: net, rpcclient, smbpasswd, pdbedit, profiles.

  • Windows: NT4 Domain User Manager, Server Manager (NEXUS)

Chapter 32. SWAT The Samba Web Administration Tool

John H. Terpstra

Samba Team

April 21, 2003

There are many and varied opinions regarding the usefulness of SWAT. No matter how hard one tries to produce the perfect configuration tool, it remains an object of personal taste. SWAT is a tool that will allow Web-based configuration of Samba. It has a wizard that may help to get Samba configured quickly, it has context-sensitive help on each smb.conf parameter, it provides for monitoring of current state of connection information, and it allows network-wide MS Windows network password management.

Features and Benefits

SWAT is a facility that is part of the Samba suite. The main executable is called swat and is invoked by the inter-networking super daemon. See for details.

SWAT uses integral samba components to locate parameters supported by the particular version of Samba. Unlike tools and utilities that are external to Samba, SWAT is always up to date as known Samba parameters change. SWAT provides context-sensitive help for each configuration parameter, directly from man page entries.

There are network administrators who believe that it is a good idea to write systems documentation inside configuration files, and for them SWAT will aways be a nasty tool. SWAT does not store the configuration file in any intermediate form, rather, it stores only the parameter settings, so when SWAT writes the smb.conf file to disk, it will write only those parameters that are at other than the default settings. The result is that all comments, as well as parameters that are no longer supported, will be lost from the smb.conf file. Additionally, the parameters will be written back in internal ordering.

Note

Before using SWAT, please be warned SWAT will completely replace your smb.conf with a fully-optimized file that has been stripped of all comments you might have placed there and only non-default settings will be written to the file.

Guidelines and Technical Tips

This section aims to unlock the dark secrets behind how SWAT may be made to work, may be made more secure, and how to solve Internationalization support problems.

Validate SWAT Installation

The very first step that should be taken before attempting to configure a host system for SWAT operation is to check that it is installed. This may seem a trivial point to some, however several Linux distributions do not install SWAT by default, even though they do ship an installable binary support package containing SWAT on the distribution media.

When you have configrmed that SWAT is installed it is necessary to validate that the installation includes the binary swat file as well as all the supporting text and Web files. A number of operating system distributions in the past have failed to include the necessary support files, evne though the swat binary executable file was installed.

Finally, when you are sure that SWAT has been fully installed, please check the SWAT has been enebled in the control file for the internetworking super-daemon (inetd or xinetd) that is used on your operating system platform.

Locating the swat File

To validate that SWAT is installed, first locate the swat binary file on the system. It may be found under the following directories:

/usr/local/samba/bin the default Samba location.
/usr/sbin the default location on most Linux systems.
/opt/samba/bin

The actual location is much dependant on the choice of the operating system vendor, or as determined by the administrator who compiled and installed Samba.

There are a number methods that may be used to locate the swat binary file. The following methods may be helpful:

If swat is in your current operating system search path it will be easy to find it. You can ask what are the command-line options for swat as shown here:

frodo:~ # swat -?
Usage: swat [OPTION...]
  -a, --disable-authentication         Disable authentication (demo mode)

Help options:
  -?, --help                           Show this help message
  --usage                              Display brief usage message

Common samba options:
  -d, --debuglevel=DEBUGLEVEL          Set debug level
  -s, --configfile=CONFIGFILE          Use alternative configuration file
  -l, --log-basename=LOGFILEBASE       Basename for log/debug files
  -V, --version                        Print version

Locating the SWAT Support Files

Now that you have found that swat is in the search path, it is easy to identify where the file is located. Here is another simple way this may be done:

frodo:~ # whereis swat
swat: /usr/sbin/swat /usr/share/man/man8/swat.8.gz

If the above measures fail to locate the swat binary, another approach is needed. The following may be used:

frodo:/ # find / -name swat -print
/etc/xinetd.d/swat
/usr/sbin/swat
/usr/share/samba/swat
frodo:/ #

This list shows that there is a control file for xinetd, the internetwork super-daemon that is installed on this server. The location of the SWAT binary file is /usr/sbin/swat, and the support files for it are located under the directory /usr/share/samba/swat.

We must now check where swat expects to find its support files. This can be done as follows:

frodo:/ # strings /usr/sbin/swat | grep "/swat"
/swat/
...
/usr/share/samba/swat
frodo:/ #

The /usr/share/samba/swat/ entry shown in this listing is the location of the support files. You should verify that the support files exist under this directory. A sample list is as shown:

jht@frodo:/> find /usr/share/samba/swat -print
/usr/share/samba/swat
/usr/share/samba/swat/help
/usr/share/samba/swat/lang
/usr/share/samba/swat/lang/ja
/usr/share/samba/swat/lang/ja/help
/usr/share/samba/swat/lang/ja/help/welcome.html
/usr/share/samba/swat/lang/ja/images
/usr/share/samba/swat/lang/ja/images/home.gif
...
/usr/share/samba/swat/lang/ja/include
/usr/share/samba/swat/lang/ja/include/header.nocss.html
...
/usr/share/samba/swat/lang/tr
/usr/share/samba/swat/lang/tr/help
/usr/share/samba/swat/lang/tr/help/welcome.html
/usr/share/samba/swat/lang/tr/images
/usr/share/samba/swat/lang/tr/images/home.gif
...
/usr/share/samba/swat/lang/tr/include
/usr/share/samba/swat/lang/tr/include/header.html
/usr/share/samba/swat/using_samba
...
/usr/share/samba/swat/images
/usr/share/samba/swat/images/home.gif
...
/usr/share/samba/swat/include
/usr/share/samba/swat/include/footer.html
/usr/share/samba/swat/include/header.html
jht@frodo:/>

If the files needed are not available it will be necessary to obtain and install them before SWAT can be used.

Enabling SWAT for Use

SWAT should be installed to run via the network super-daemon. Depending on which system your UNIX/Linux system has, you will have either an inetd- or xinetd-based system.

The nature and location of the network super-daemon varies with the operating system implementation. The control file (or files) can be located in the file /etc/inetd.conf or in the directory /etc/[x]inet[d].d or similar.

The control entry for the older style file might be:

	# swat is the Samba Web Administration Tool
	swat stream tcp nowait.400 root /usr/sbin/swat swat

A control file for the newer style xinetd could be:

# default: off
# description: SWAT is the Samba Web Admin Tool. Use swat \
#              to configure your Samba server. To use SWAT, \
#              connect to port 901 with your favorite web browser.
service swat
{
	port    = 901
	socket_type     = stream
	wait    = no
	only_from = localhost
	user    = root
	server  = /usr/sbin/swat
	log_on_failure  += USERID
	disable = yes
}

Both of the above examples assume that the swat binary has been located in the /usr/sbin directory. In addition to the above, SWAT will use a directory access point from which it will load its Help files as well as other control information. The default location for this on most Linux systems is in the directory /usr/share/samba/swat. The default location using Samba defaults will be /usr/local/samba/swat.

Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user, the only permission allowed is to view certain aspects of configuration as well as access to the password change facility. The buttons that will be exposed to the non-root user are: HOME, STATUS, VIEW, PASSWORD. The only page that allows change capability in this case is PASSWORD.

As long as you log onto SWAT as the user root, you should obtain full change and commit ability. The buttons that will be exposed include: HOME, GLOBALS, SHARES, PRINTERS, WIZARD, STATUS, VIEW, PASSWORD.

Securing SWAT through SSL

Many people have asked about how to setup SWAT with SSL to allow for secure remote administration of Samba. Here is a method that works, courtesy of Markus Krieger.

Modifications to the SWAT setup are as follows:

  1. Install OpenSSL.

  2. Generate certificate and private key.

    root# /usr/bin/openssl req -new -x509 -days 365 -nodes -config \
    	/usr/share/doc/packages/stunnel/stunnel.cnf \
    	-out /etc/stunnel/stunnel.pem -keyout /etc/stunnel/stunnel.pem
    
  3. Remove swat-entry from [x]inetd.

  4. Start stunnel.

    root# stunnel -p /etc/stunnel/stunnel.pem -d 901 \
    	 -l /usr/local/samba/bin/swat swat 
    

Afterward, simply connect to swat by using the URL https://myhost:901, accept the certificate and the SSL connection is up.

Enabling SWAT Internationalization Support

SWAT can be configured to display its messages to match the settings of the language configurations of your Web browser. It will be passed to SWAT in the Accept-Language header of the HTTP request.

To enable this feature:

  • Install the proper msg files from the Samba source/po directory into $LIBDIR.

  • Set the correct locale value for display charset.

  • Set your browser's language setting.

The name of msg file is same as the language ID sent by the browser. For example en means "English", ja means "Japanese", fr means "French.

If you do not like some of messages, or there are no msg files for your locale, you can create them simply by copying the en.msg files to the dirertory for “your language ID.msg” and filling in proper strings to each “msgstr”. For example, in it.msg, the msg file for the Italian locale, just set:

msgid "Set Default"
msgstr "Imposta Default"

and so on. If you find a mistake or create a new msg file, please email it to us so we will include this in the next release of Samba.

Note that if you enable this feature and the display charset is not matched to your browser's setting, the SWAT display may be corrupted. In a future version of Samba, SWAT will always display messages with UTF-8 encoding. You will then not need to set this smb.conf file parameter.

Overview and Quick Tour

SWAT is a tools that many be used to configure Samba, or just to obtain useful links to important reference materials such as the contents of this book, as well as other documents that have been found useful for solving Windows networking problems.

The SWAT Home Page

The SWAT title page provides access to the latest Samba documentation. The manual page for each Samba component is accessible from this page, as are the Samba HOWTO-Collection (this document) as well as the O'Reilly book “Using Samba.

Administrators who wish to validate their Samba configuration may obtain useful information from the man pages for the diagnostic utilities. These are available from the SWAT home page also. One diagnostic tool that is not mentioned on this page, but that is particularly useful is ethereal.

Warning

SWAT can be configured to run in demo mode. This is not recommended as it runs SWAT without authentication and with full administrative ability. Allows changes to smb.conf as well as general operation with root privileges. The option that creates this ability is the -a flag to swat. Do not use this in a production environment.

Global Settings

The GLOBALS button will expose a page that allows configuration of the global parameters in smb.conf. There are two levels of exposure of the parameters:

  • Basic exposes common configuration options.

  • Advanced exposes configuration options needed in more complex environments.

To switch to other than Basic editing ability, click on Advanced. You may also do this by clicking on the radio button, then click on the Commit Changes button.

After making any changes to configuration parameters, make sure that you click on the Commit Changes button before moving to another area, otherwise your changes will be lost.

Note

SWAT has context-sensitive help. To find out what each parameter is for, simply click on the Help link to the left of the configuration parameter.

Share Settings

To effect a currently configured share, simply click on the pull down button between the Choose Share and the Delete Share buttons, select the share you wish to operate on, then to edit the settings click on the Choose Share button. To delete the share, simply press the Delete Share button.

To create a new share, next to the button labeled Create Share enter into the text field the name of the share to be created, then click on the Create Share button.

Printers Settings

To affect a currently configured printer, simply click on the pull down button between the Choose Printer and the Delete Printer buttons, select the printer you wish to operate on, then to edit the settings click on the Choose Printer button. To delete the share, simply press the Delete Printer button.

To create a new printer, next to the button labeled Create Printer enter into the text field the name of the share to be created, then click on the Create Printer button.

The SWAT Wizard

The purpose if the SWAT Wizard is to help the Microsoft-knowledgeable network administrator to configure Samba with a minimum of effort.

The Wizard page provides a tool for rewriting the smb.conf file in fully optimized format. This will also happen if you press the Commit button. The two differ since the Rewrite button ignores any changes that may have been made, while the Commit button causes all changes to be affected.

The Edit button permits the editing (setting) of the minimal set of options that may be necessary to create a working Samba server.

Finally, there are a limited set of options that will determine what type of server Samba will be configured for, whether it will be a WINS server, participate as a WINS client, or operate with no WINS support. By clicking one button, you can elect to expose (or not) user home directories.

The Status Page

The status page serves a limited purpose. First, it allows control of the Samba daemons. The key daemons that create the Samba server environment are: smbd, nmbd, winbindd.

The daemons may be controlled individually or as a total group. Additionally, you may set an automatic screen refresh timing. As MS Windows clients interact with Samba, new smbd processes will be continually spawned. The auto-refresh facility will allow you to track the changing conditions with minimal effort.

Lastly, the Status page may be used to terminate specific smbd client connections in order to free files that may be locked.

The View Page

This page allows the administrator to view the optimized smb.conf file and, if you are particularly masochistic, will permit you also to see all possible global configuration parameters and their settings.

The Password Change Page

The Password Change page is a popular tool that allows the creation, deletion, deactivation, and reactivation of MS Windows networking users on the local machine. Alternately, you can use this tool to change a local password for a user account.

When logged in as a non-root account, the user will have to provide the old password as well as the new password (twice). When logged in as root, only the new password is required.

One popular use for this tool is to change user passwords across a range of remote MS Windows servers.

Troubleshooting

Chapter 33. The Samba Checklist

Andrew Tridgell

Samba Team

Jelmer R. Vernooij

The Samba Team

Dan Shearer

Samba Team

Wed Jan 15

Introduction

This file contains a list of tests you can perform to validate your Samba server. It also tells you what the likely cause of the problem is if it fails any one of these steps. If it passes all these tests, then it is probably working fine.

You should do all the tests, in the order shown. We have tried to carefully choose them so later tests only use capabilities verified in the earlier tests. However, do not stop at the first error as there have been some instances when continuing with the tests has helped to solve a problem.

If you send one of the Samba mailing lists an email saying, “it does not work” and you have not followed this test procedure, you should not be surprised if your email is ignored.

Assumptions

In all of the tests, it is assumed you have a Samba server called BIGSERVER and a PC called ACLIENT both in workgroup TESTGROUP.

The procedure is similar for other types of clients.

It is also assumed you know the name of an available share in your smb.conf. I will assume this share is called tmp. You can add a tmp share like this by adding the lines shown in .

Example 33.1. smb.conf with [tmp] share

[tmp]
comment = temporary files
path = /tmp
read only = yes

Note

These tests assume version 3.0.0 or later of the Samba suite. Some commands shown did not exist in earlier versions.

Please pay attention to the error messages you receive. If any error message reports that your server is being unfriendly, you should first check that your IP name resolution is correctly set up. Make sure your /etc/resolv.conf file points to name servers that really do exist.

Also, if you do not have DNS server access for name resolution, please check that the settings for your smb.conf file results in dns proxy = no. The best way to check this is with testparm smb.conf.

It is helpful to monitor the log files during testing by using the tail -F log_file_name in a separate terminal console (use ctrl-alt-F1 through F6 or multiple terminals in X). Relevant log files can be found (for default installations) in /usr/local/samba/var. Also, connection logs from machines can be found here or possibly in /var/log/samba, depending on how or if you specified logging in your smb.conf file.

If you make changes to your smb.conf file while going through these test, remember to restart smbd and nmbd.

The Tests

Procedure 33.1. Diagnosing your Samba server

  1. In the directory in which you store your smb.conf file, run the command testparm smb.conf. If it reports any errors, then your smb.conf configuration file is faulty.

    Note

    Your smb.conf file may be located in: /etc/samba or in /usr/local/samba/lib.

  2. Run the command ping BIGSERVER from the PC and ping ACLIENT from the UNIX box. If you do not get a valid response, then your TCP/IP software is not correctly installed.

    You will need to start a “dos prompt” window on the PC to run ping.

    If you get a message saying “host not found” or similar, then your DNS software or /etc/hosts file is not correctly setup. It is possible to run Samba without DNS entries for the server and client, but it is assumed you do have correct entries for the remainder of these tests.

    Another reason why ping might fail is if your host is running firewall software. You will need to relax the rules to let in the workstation in question, perhaps by allowing access from another subnet (on Linux this is done via the appropriate firewall maintenance commands ipchains or iptables).

    Note

    Modern Linux distributions install ipchains/iptables by default. This is a common problem that is often overlooked.

    If you wish to check what firewall rules may be present in a system under test, simply run iptables -L -v or if ipchains-based firewall rules are in use, ipchains -L -v.

    Here is a sample listing from a system that has an external ethernet interface (eth1) on which Samba is not active, and an internal (private network) interface (eth0) on which Samba is active:

    frodo:~ # iptables -L -v
    Chain INPUT (policy DROP 98496 packets, 12M bytes)
     pkts bytes target     prot opt in     out     source     destination
     187K  109M ACCEPT     all  --  lo     any     anywhere   anywhere
     892K  125M ACCEPT     all  --  eth0   any     anywhere   anywhere
    1399K 1380M ACCEPT     all  --  eth1   any     anywhere   anywhere  \
    					state RELATED,ESTABLISHED
    
    Chain FORWARD (policy DROP 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source     destination
     978K 1177M ACCEPT     all  --  eth1   eth0    anywhere   anywhere \
    					state RELATED,ESTABLISHED
     658K   40M ACCEPT     all  --  eth0   eth1    anywhere   anywhere
        0     0 LOG        all  --  any    any     anywhere   anywhere \
    					LOG level warning
    
    Chain OUTPUT (policy ACCEPT 2875K packets, 1508M bytes)
     pkts bytes target     prot opt in     out     source     destination
    
    Chain reject_func (0 references)
     pkts bytes target     prot opt in     out     source     destinat
    

  3. Run the command: smbclient -L BIGSERVER on the UNIX box. You should get back a list of available shares.

    If you get an error message containing the string “Bad password”, then you probably have either an incorrect hosts allow, hosts deny or valid users line in your smb.conf, or your guest account is not valid. Check what your guest account is using testparm and temporarily remove any hosts allow, hosts deny, valid users or invalid users lines.

    If you get a message “connection refused” response, then the smbd server may not be running. If you installed it in inetd.conf, then you probably edited that file incorrectly. If you installed it as a daemon, then check that it is running, and check that the netbios-ssn port is in a LISTEN state using netstat -a.

    Note

    Some UNIX/Linux systems use xinetd in place of inetd. Check your system documentation for the location of the control files for your particular system implementation of the network super daemon.

    If you get a message saying “session request failed”, the server refused the connection. If it says “Your server software is being unfriendly”, then it's probably because you have invalid command line parameters to smbd, or a similar fatal problem with the initial startup of smbd. Also check your config file (smb.conf) for syntax errors with testparm and that the various directories where Samba keeps its log and lock files exist.

    There are a number of reasons for which smbd may refuse or decline a session request. The most common of these involve one or more of the smb.conf file entries as shown in .

    Example 33.2. Configuration for only allowing connections from a certain subnet

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy
    interfaces = eth0
    bind interfaces only = Yes
    ...

    In the above, no allowance has been made for any session requests that will automatically translate to the loopback adapter address 127.0.0.1. To solve this problem, change these lines as shown in .

    Example 33.3. Configuration for allowing connections from a certain subnet and localhost

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy 127.
    interfaces = eth0 lo
    ...

    Another common cause of these two errors is having something already running on port 139, such as Samba (smbd is running from inetd already) or something like Digital's Pathworks. Check your inetd.conf file before trying to start smbd as a daemon it can avoid a lot of frustration!

    And yet another possible cause for failure of this test is when the subnet mask and/or broadcast address settings are incorrect. Please check that the network interface IP Address/Broadcast Address/Subnet Mask settings are correct and that Samba has correctly noted these in the log.nmbd file.

  4. Run the command: nmblookup -B BIGSERVER __SAMBA__. You should get back the IP address of your Samba server.

    If you do not, then nmbd is incorrectly installed. Check your inetd.conf if you run it from there, or that the daemon is running and listening to udp port 137.

    One common problem is that many inetd implementations can't take many parameters on the command line. If this is the case, then create a one-line script that contains the right parameters and run that from inetd.

  5. Run the command: nmblookup -B ACLIENT `*'

    You should get the PC's IP address back. If you do not then the client software on the PC isn't installed correctly, or isn't started, or you got the name of the PC wrong.

    If ACLIENT does not resolve via DNS then use the IP address of the client in the above test.

  6. Run the command: nmblookup -d 2 '*'

    This time we are trying the same as the previous test but are trying it via a broadcast to the default broadcast address. A number of NetBIOS/TCP/IP hosts on the network should respond, although Samba may not catch all of the responses in the short time it listens. You should see the “got a positive name query response” messages from several hosts.

    If this does not give a similar result to the previous test, then nmblookup isn't correctly getting your broadcast address through its automatic mechanism. In this case you should experiment with the interfaces option in smb.conf to manually configure your IP address, broadcast and netmask.

    If your PC and server aren't on the same subnet, then you will need to use the -B option to set the broadcast address to that of the PCs subnet.

    This test will probably fail if your subnet mask and broadcast address are not correct. (Refer to TEST 3 notes above).

  7. Run the command: smbclient //BIGSERVER/TMP. You should then be prompted for a password. You should use the password of the account with which you are logged into the UNIX box. If you want to test with another account, then add the -U accountname option to the end of the command line. For example, smbclient //bigserver/tmp -Ujohndoe.

    Note

    It is possible to specify the password along with the username as follows: smbclient //bigserver/tmp -Ujohndoe%secret.

    Once you enter the password, you should get the smb> prompt. If you do not, then look at the error message. If it says “invalid network name”, then the service tmp is not correctly setup in your smb.conf.

    If it says “bad password”, then the likely causes are:

    1. You have shadow passwords (or some other password system) but didn't compile in support for them in smbd.

    2. Your valid users configuration is incorrect.

    3. You have a mixed case password and you haven't enabled the password level option at a high enough level.

    4. The path line in smb.conf is incorrect. Check it with testparm.

    5. You enabled password encryption but didn't map UNIX to Samba users. Run: smbpasswd -a username

    Once connected, you should be able to use the commands dir, get, put and so on. Type help command for instructions. You should especially check that the amount of free disk space shown is correct when you type dir.

  8. On the PC, type the command net view \\BIGSERVER. You will need to do this from within a dos prompt window. You should get back a list of shares available on the server.

    If you get a message “network name not found” or similar error, then netbios name resolution is not working. This is usually caused by a problem in nmbd. To overcome it, you could do one of the following (you only need to choose one of them):

    1. Fixup the nmbd installation.

    2. Add the IP address of BIGSERVER to the wins server box in the advanced TCP/IP setup on the PC.

    3. Enable Windows name resolution via DNS in the advanced section of the TCP/IP setup.

    4. Add BIGSERVER to your lmhosts file on the PC.

    If you get a message “invalid network name” or “bad password error”, then apply the same fixes as for the smbclient -L test above. In particular, make sure your hosts allow line is correct (see the man pages).

    Also, do not overlook that fact that when the workstation requests the connection to the Samba server, it will attempt to connect using the name with which you logged onto your Windows machine. You need to make sure that an account exists on your Samba server with that exact same name and password.

    If you get a message “specified computer is not receiving requests” or similar, it probably means that the host is not contactable via TCP services. Check to see if the host is running TCP wrappers, and if so add an entry in the hosts.allow file for your client (or subnet, and so on.)

  9. Run the command net use x: \\BIGSERVER\TMP. You should be prompted for a password, then you should get a command completed successfully message. If not, then your PC software is incorrectly installed or your smb.conf is incorrect. Make sure your hosts allow and other config lines in smb.conf are correct.

    It's also possible that the server can't work out what user name to connect you as. To see if this is the problem, add the line user = username to the [tmp] section of smb.conf where username is the username corresponding to the password you typed. If you find this fixes things, you may need the username mapping option.

    It might also be the case that your client only sends encrypted passwords and you have encrypt passwords = no in smb.conf. Change this to "yes" to fix this.

  10. Run the command nmblookup -M testgroup where testgroup is the name of the workgroup that your Samba server and Windows PCs belong to. You should get back the IP address of the master browser for that workgroup.

    If you do not, then the election process has failed. Wait a minute to see if it is just being slow, then try again. If it still fails after that, then look at the browsing options you have set in smb.conf. Make sure you have preferred master = yes to ensure that an election is held at startup.

  11. >From file manager, try to browse the server. Your Samba server should appear in the browse list of your local workgroup (or the one you specified in smb.conf). You should be able to double click on the name of the server and get a list of shares. If you get the error message “invalid password”, you are probably running Windows NT and it is refusing to browse a server that has no encrypted password capability and is in User Level Security mode. In this case, either set security = server and password server = Windows_NT_Machine in your smb.conf file, or make sure encrypt passwords is set to “yes”.

Chapter 34. Analyzing and Solving Samba Problems

Gerald (Jerry) Carter

Samba Team

Jelmer R. Vernooij

The Samba Team

David Bannon

Samba Team

Dan Shearer

Samba Team

8 Apr 2003

There are many sources of information available in the form of mailing lists, RFCs and documentation. The documentation that comes with the Samba distribution contains good explanations of general SMB topics such as browsing.

Diagnostics Tools

With SMB networking, it is often not immediately clear what the cause is of a certain problem. Samba itself provides rather useful information, but in some cases you might have to fall back to using a sniffer. A sniffer is a program that listens on your LAN, analyzes the data sent on it and displays it on the screen.

Debugging with Samba Itself

One of the best diagnostic tools for debugging problems is Samba itself. You can use the -d option for both smbd and nmbd to specify the debug level at which to run. See the man pages for smbd, nmbd and smb.conf for more information regarding debugging options. The debug level can range from 1 (the default) to 10 (100 for debugging passwords).

Another helpful method of debugging is to compile Samba using the gcc -g flag. This will include debug information in the binaries and allow you to attach gdb to the running smbd/nmbd process. To attach gdb to an smbd process for an NT workstation, first get the workstation to make the connection. Pressing ctrl-alt-delete and going down to the domain box is sufficient (at least, the first time you join the domain) to generate a LsaEnumTrustedDomains. Thereafter, the workstation maintains an open connection and there will be an smbd process running (assuming that you haven't set a really short smbd idle timeout). So, in between pressing ctrl-alt-delete and actually typing in your password, you can attach gdb and continue.

Some useful Samba commands worth investigating are:

$ testparm | more
$ smbclient -L //{netbios name of server}

Tcpdump

Tcpdump was the first UNIX sniffer with SMB support. It is a command-line utility and now, its SMB support is somewhat lagging that of ethereal and tethereal.

Ethereal

Ethereal is a graphical sniffer, available for both UNIX (Gtk) and Windows. Ethereal's SMB support is quite good.

For details on the use of ethereal, read the well-written Ethereal User Guide.

Figure 34.1. Starting a capture.

Starting a capture.

Listen for data on ports 137, 138, 139, and 445. For example, use the filter port 137, port 138, port 139, or port 445 as seen in .

A console version of ethereal is available as well and is called tethereal.

Figure 34.2. Main ethereal data window.

Main ethereal data window.

The Windows Network Monitor

For tracing things on Microsoft Windows NT, Network Monitor (aka Netmon) is available on Microsoft Developer Network CDs, the Windows NT Server install CD and the SMS CDs. The version of Netmon that ships with SMS allows for dumping packets between any two computers (i.e., placing the network interface in promiscuous mode). The version on the NT Server install CD will only allow monitoring of network traffic directed to the local NT box and broadcasts on the local subnet. Be aware that Ethereal can read and write Netmon formatted files.

Installing Network Monitor on an NT Workstation

Installing Netmon on an NT workstation requires a couple of steps. The following are instructions for installing Netmon V4.00.349, which comes with Microsoft Windows NT Server 4.0, on Microsoft Windows NT Workstation 4.0. The process should be similar for other versions of Windows NT version of Netmon. You will need both the Microsoft Windows NT Server 4.0 Install CD and the Workstation 4.0 Install CD.

Initially you will need to install Network Monitor Tools and Agent on the NT Server to do this:

  • Go to Start -> Settings -> Control Panel -> Network -> Services -> Add.

  • Select the Network Monitor Tools and Agent and click on OK.

  • Click on OK on the Network Control Panel.

  • Insert the Windows NT Server 4.0 install CD when prompted.

At this point, the Netmon files should exist in %SYSTEMROOT%\System32\netmon\*.*. Two subdirectories exist as well, parsers\ which contains the necessary DLLs for parsing the Netmon packet dump, and captures\.

To install the Netmon tools on an NT Workstation, you will first need to install the Network Monitor Agent from the Workstation install CD.

  • Go to Start -> Settings -> Control Panel -> Network -> Services -> Add.

  • Select the Network Monitor Agent, click on OK.

  • Click on OK in the Network Control Panel.

  • Insert the Windows NT Workstation 4.0 install CD when prompted.

Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon to %SYSTEMROOT%\System32\netmon on the Workstation and set permissions as you deem appropriate for your site. You will need administrative rights on the NT box to run Netmon.

Installing Network Monitor on Windows 9x/Me

To install Netmon on Windows 9x/Me, install the Network Monitor Agent from the Windows 9x/Me CD (\admin\nettools\netmon). There is a readme file located with the Netmon driver files on the CD if you need information on how to do this. Copy the files from a working Netmon installation.

Useful URLs

  • See how Scott Merrill simulates a BDC behavior at http://www.skippy.net/linux/smb-howto.html.

  • FTP site for older SMB specs: ftp://ftp.microsoft.com/developr/drg/CIFS/

Getting Mailing List Help

There are a number of Samba-related mailing lists. Go to http://samba.org, click on your nearest mirror and then click on Support and next click on Samba-related mailing lists.

For questions relating to Samba TNG, go to http://www.samba-tng.org/. It has been requested that you do not post questions about Samba-TNG to the main-stream Samba lists.

If you do post a message to one of the lists, please observe the following guidelines :

  • Always remember that the developers are volunteers, they are not paid and they never guarantee to produce a particular feature at a particular time. Any timelines are “best guess” and nothing more.

  • Always mention what version of Samba you are using and what operating system it's running under. You should list the relevant sections of your smb.conf file, at least the options in [global] that affect PDC support.

  • In addition to the version, if you obtained Samba via CVS, mention the date when you last checked it out.

  • Try and make your questions clear and brief. Lots of long, convoluted questions get deleted before they are completely read! Do not post HTML encoded messages. Most people on mailing lists simply delete them.

  • If you run one of those nifty “I'm on holidays” things when you are away, make sure its configured to not answer mailing list traffic. Auto-responses to mailing lists really irritate the thousands of people who end up having to deal with such bad netiquet bahavior.

  • Don't cross post. Work out which is the best list to post to and see what happens. Do not post to both samba-ntdom and samba-technical. Many people active on the lists subscribe to more than one list and get annoyed to see the same message two or more times. Often someone will see a message and thinking it would be better dealt with on another list, will forward it on for you.

  • You might include partial log files written at a debug level set to as much as 20. Please do not send the entire log but just enough to give the context of the error messages.

  • If you have a complete Netmon trace (from the opening of the pipe to the error), you can send the *.CAP file as well.

  • Please think carefully before attaching a document to an email. Consider pasting the relevant parts into the body of the message. The Samba mailing lists go to a huge number of people. Do they all need a copy of your smb.conf in their attach directory?

How to Get Off the Mailing Lists

To have your name removed from a Samba mailing list, go to the same place where you went to subscribe to it. Go to http://lists.samba.org, click on your nearest mirror, click on Support and then click on Samba related mailing lists.

Please do not post messages to the list asking to be removed. You will only be referred to the above address (unless that process failed in some way).

Chapter 35. Reporting Bugs

John H. Terpstra

Samba Team

Jelmer R. Vernooij

The Samba Team

Andrew Tridgell

Samba Team

27 June 1997

Introduction

Please report bugs using Samba's Bugzilla facilities and take the time to read this file before you submit a bug report. Also, check to see if it has changed between releases, as we may be changing the bug reporting mechanism at some point.

Please do as much as you can yourself to help track down the bug. Samba is maintained by a dedicated group of people who volunteer their time, skills and efforts. We receive far more mail than we can possibly answer, so you have a much higher chance of a response and a fix if you send us a “developer friendly” bug report that lets us fix it fast.

Do not assume that if you post the bug to the comp.protocols.smb newsgroup or the mailing list that we will read it. If you suspect that your problem is not a bug but a configuration problem, it is better to send it to the Samba mailing list, as there are thousands of other users on that list who may be able to help you.

You may also like to look though the recent mailing list archives, which are conveniently accessible on the Samba Web pages at http://samba.org/samba/.

General Information

Before submitting a bug report, check your config for silly errors. Look in your log files for obvious messages that tell you've misconfigured something. Run testparm to check your config file for correct syntax.

Have you looked through ? This is extremely important.

If you include part of a log file with your bug report, then be sure to annotate it with exactly what you were doing on the client at the time and exactly what the results were.

Debug Levels

If the bug has anything to do with Samba behaving incorrectly as a server (like refusing to open a file), then the log files will probably be quite useful. Depending on the problem, a log level of between 3 and 10 showing the problem may be appropriate. A higher level gives more detail, but may use too much disk space.

To set the debug level, use the log level in your smb.conf. You may also find it useful to set the log level higher for just one machine and keep separate logs for each machine. To do this, add the following lines to your main smb.conf file:

log level = 10
log file = /usr/local/samba/lib/log.%m
include = /usr/local/samba/lib/smb.conf.%m

and create a file /usr/local/samba/lib/smb.conf.machine where machine is the name of the client you wish to debug. In that file put any smb.conf commands you want, for example log level may be useful. This also allows you to experiment with different security systems, protocol levels and so on, on just one machine.

The smb.conf entry log level is synonymous with the parameter debuglevel that has been used in older versions of Samba and is being retained for backward compatibility of smb.conf files.

As the log level value is increased, you will record a significantly greater level of debugging information. For most debugging operations, you may not need a setting higher than 3. Nearly all bugs can be tracked at a setting of 10, but be prepared for a large volume of log data.

Internal Errors

If you get the message “INTERNAL ERROR” in your log files, it means that Samba got an unexpected signal while running. It is probably a segmentation fault and almost certainly means a bug in Samba (unless you have faulty hardware or system software).

If the message came from smbd, it will probably be accompanied by a message that details the last SMB message received by smbd. This information is often useful in tracking down the problem so please include it in your bug report.

You should also detail how to reproduce the problem, if possible. Please make this reasonably detailed.

You may also find that a core file appeared in a corefiles subdirectory of the directory where you keep your Samba log files. This file is the most useful tool for tracking down the bug. To use it, you do this:

$ gdb smbd core

adding appropriate paths to smbd and core so gdb can find them. If you do not have gdb, try dbx. Then within the debugger, use the command where to give a stack trace of where the problem occurred. Include this in your report.

If you know any assembly language, do a disass of the routine where the problem occurred (if its in a library routine, then disassemble the routine that called it) and try to work out exactly where the problem is by looking at the surrounding code. Even if you do not know assembly, including this information in the bug report can be useful.

Attaching to a Running Process

Unfortunately, some UNIXes (in particular some recent Linux kernels) refuse to dump a core file if the task has changed uid (which smbd does often). To debug with this sort of system, you could try to attach to the running process using gdb smbd PID where you get PID from smbstatus. Then use c to continue and try to cause the core dump using the client. The debugger should catch the fault and tell you where it occurred.

Patches

The best sort of bug report is one that includes a fix! If you send us patches, please use diff -u format if your version of diff supports it, otherwise use diff -c4. Make sure you do the diff against a clean version of the source and let me know exactly what version you used.

Appendixes

Chapter 36. How to Compile Samba

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Andrew Tridgell

Samba Team

22 May 2001

18 March 2003

You can obtain the Samba source from the Samba Website. To obtain a development version, you can download Samba from CVS or using rsync.

Access Samba Source Code via CVS

Introduction

Samba is developed in an open environment. Developers use Concurrent Versioning System (CVS) to “checkin” (also known as “commit”) new source code. Samba's various CVS branches can be accessed via anonymous CVS using the instructions detailed in this chapter.

This chapter is a modified version of the instructions found at http://samba.org/samba/cvs.html

CVS Access to samba.org

The machine samba.org runs a publicly accessible CVS repository for access to the source code of several packages, including Samba, rsync, distcc, ccache, and jitterbug. There are two main ways of accessing the CVS server on this host:

Access via CVSweb

You can access the source code via your favorite WWW browser. This allows you to access the contents of individual files in the repository and also to look at the revision history and commit logs of individual files. You can also ask for a diff listing between any two versions on the repository.

Use the URL: http://samba.org/cgi-bin/CVSweb

Access via CVS

You can also access the source code via a normal CVS client. This gives you much more control over what you can do with the repository and allows you to checkout whole source trees and keep them up-to-date via normal CVS commands. This is the preferred method of access if you are a developer and not just a casual browser.

To download the latest CVS source code, point your browser at the URL : http://www.cyclic.com/. and click on the “How to get CVS” link. CVS is free software under the GNU GPL (as is Samba). Note that there are several graphical CVS clients that provide a graphical interface to the sometimes mundane CVS commands. Links to theses clients are also available from the Cyclic Web site.

To gain access via anonymous CVS, use the following steps. For this example it is assumed that you want a copy of the Samba source code. For the other source code repositories on this system just substitute the correct package name.

Procedure 36.1. Retrieving Samba using CVS

  1. Install a recent copy of CVS. All you really need is a copy of the CVS client binary.

  2. Run the command:

    cvs -d :pserver:cvs@samba.org:/cvsroot login

  3. When it asks you for a password, type cvs.

  4. Run the command

    cvs -d :pserver:CVS@samba.org:/cvsroot co samba.

    This will create a directory called samba containing the latest Samba source code (i.e., the HEAD tagged CVS branch). This currently corresponds to the 3.0 development tree.

    CVS branches other then HEAD can be obtained by using the -r and defining a tag name. A list of branch tag names can be found on the “Development” page of the Samba Web site. A common request is to obtain the latest 3.0 release code. This could be done by using the following command:

    cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_3_0 samba.

  5. Whenever you want to merge in the latest code changes, use the following command from within the Samba directory:

    cvs update -d -P

Accessing the Samba Sources via rsync and ftp

pserver.samba.org also exports unpacked copies of most parts of the CVS tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. See the rsync homepage for more info on rsync.

The disadvantage of the unpacked trees is that they do not support automatic merging of local changes like CVS does. rsync access is most convenient for an initial install.

Verifying Samba's PGP Signature

It is strongly recommended that you verify the PGP signature for any source file before installing it. Even if you're not downloading from a mirror site, verifying PGP signatures should be a standard reflex. Many people today use the GNU GPG toolset in place of PGP. GPG can substitute for PGP.

With that said, go ahead and download the following files:

$ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
$ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc

The first file is the PGP signature for the Samba source file; the other is the Samba public PGP key itself. Import the public PGP key with:

$ gpg --import samba-pubkey.asc

and verify the Samba source code integrity with:

$ gzip -d samba-2.2.8a.tar.gz
$ gpg --verify samba-2.2.8a.tar.asc

If you receive a message like, “Good signature from Samba Distribution Verification Key...” then all is well. The warnings about trust relationships can be ignored. An example of what you would not want to see would be:

     gpg: BAD signature from “Samba Distribution Verification Key

Building the Binaries

To build the binaries, first run the program ./configure in the source directory. This should automatically configure Samba for your operating system. If you have unusual needs, then you may wish to run

root# ./configure --help

first to see what special options you can enable. Now execute ./configure with any arguments it might need:

root# ./configure [... arguments ...]

Executing

root# make

will create the binaries. Once it is successfully compiled you can use

root# make install

to install the binaries and manual pages. You can separately install the binaries and/or man pages using

root# make installbin

and

root# make installman
	

Note that if you are upgrading from a previous version of Samba you might like to know that the old versions of the binaries will be renamed with an “.old” extension. You can go back to the previous version with

root# make revert

if you find this version a disaster!

Compiling Samba with Active Directory Support

In order to compile Samba with ADS support, you need to have installed on your system:

  • The MIT or Heimdal kerberos development libraries (either install from the sources or use a package).

  • The OpenLDAP development libraries.

If your kerberos libraries are in a non-standard location, then remember to add the configure option --with-krb5=DIR.

After you run configure, make sure that include/config.h it generates contain lines like this:

#define HAVE_KRB5 1
#define HAVE_LDAP 1

If it does not, configure did not find your KRB5 libraries or your LDAP libraries. Look in config.log to figure out why and fix it.

Installing the Required Packages for Debian

On Debian, you need to install the following packages:

  • libkrb5-dev
  • krb5-user

Installing the Required Packages for Red Hat Linux

On Red Hat Linux, this means you should have at least:

  • krb5-workstation (for kinit)
  • krb5-libs (for linking with)
  • krb5-devel (because you are compiling from source)

in addition to the standard development environment.

If these files are not installed on your system, you should check the installation CDs to find which has them and install the files using your tool of choice. If in doubt about what tool to use, refer to the Red Hat Linux documentation.

SuSE Linux Package Requirements

SuSE Linux installs Heimdal packages that may be required to allow you to build binary packages. You should verify that the development libraries have been installed on your system.

SuSE Linux Samba RPMs support Kerberos. Please refer to the documentation for your SuSE Linux system for information regading SuSE Linux specific configuration. Additionally, SuSE are very active in the maintenance of Samba packages that provide the maximum capabilities that are available. You should consider using SuSE provided packages where they are available.

Starting the smbd and nmbd

You must choose to start smbd and nmbd either as daemons or from inetd. Don't try to do both! Either you can put them in inetd.conf and have them started on demand by inetd or xinetd, or you can start them as daemons either from the command line or in /etc/rc.local. See the man pages for details on the command line options. Take particular care to read the bit about what user you need to have to start Samba. In many cases, you must be root.

The main advantage of starting smbd and nmbd using the recommended daemon method is that they will respond slightly more quickly to an initial connection request.

Starting from inetd.conf

Note

The following will be different if you use NIS, NIS+ or LDAP to distribute services maps.

Look at your /etc/services. What is defined at port 139/tcp? If nothing is defined, then add a line like this:

netbios-ssn     139/tcp

Similarly for 137/udp, you should have an entry like:

netbios-ns	137/udp

Next, edit your /etc/inetd.conf and add two lines like this:

		netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
		netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd 
		

The exact syntax of /etc/inetd.conf varies between UNIXes. Look at the other entries in inetd.conf for a guide.

Some distributions use xinetd instead of inetd. Consult the xinetd manual for configuration information.

Note

Some UNIXes already have entries like netbios_ns (note the underscore) in /etc/services. You must edit /etc/services or /etc/inetd.conf to make them consistent.

Note

On many systems you may need to use the interfaces option in smb.conf to specify the IP address and netmask of your interfaces. Run ifconfig as root if you do not know what the broadcast is for your net. nmbd tries to determine it at run time, but fails on some UNIXes.

Warning

Many UNIXes only accept around five parameters on the command line in inetd.conf. This means you shouldn't use spaces between the options and arguments, or you should use a script and start the script from inetd.

Restart inetd, perhaps just send it a HUP.

			root# killall -HUP inetd
		

Alternative: Starting smbd as a Daemon

To start the server as a daemon, you should create a script something like this one, perhaps calling it startsmb.

		#!/bin/sh
		/usr/local/samba/bin/smbd -D 
		/usr/local/samba/bin/nmbd -D 
		

Make it executable with chmod +x startsmb

You can then run startsmb by hand or execute it from /etc/rc.local.

To kill it, send a kill signal to the processes nmbd and smbd.

Note

If you use the SVR4 style init system, you may like to look at the examples/svr4-startup script to make Samba fit into that system.

Chapter 37. Portability

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Samba works on a wide range of platforms but the interface all the platforms provide is not always compatible. This chapter contains platform-specific information about compiling and using Samba.

HPUX

HP's implementation of supplementary groups is non-standard (for historical reasons). There are two group files, /etc/group and /etc/logingroup; the system maps UIDs to numbers using the former, but initgroups() reads the latter. Most system admins who know the ropes symlink /etc/group to /etc/logingroup (hard link does not work for reasons too obtuse to go into here). initgroups() will complain if one of the groups you're in in /etc/logingroup has what it considers to be an invalid ID, which means outside the range [0..UID_MAX], where UID_MAX is (I think) 60000 currently on HP-UX. This precludes -2 and 65534, the usual nobody GIDs.

If you encounter this problem, make sure the programs that are failing to initgroups() are run as users, not in any groups with GIDs outside the allowed range.

This is documented in the HP manual pages under setgroups(2) and passwd(4).

On HP-UX you must use gcc or the HP ANSI compiler. The free compiler that comes with HP-UX is not ANSI compliant and cannot compile Samba.

SCO UNIX

If you run an old version of SCO UNIX, you may need to get important TCP/IP patches for Samba to work correctly. Without the patch, you may encounter corrupt data transfers using Samba.

The patch you need is UOD385 Connection Drivers SLS. It is available from SCO (ftp.sco.com, directory SLS, files uod385a.Z and uod385a.ltr.Z).

The information provided here refers to an old version of SCO UNIX. If you require binaries for more recent SCO UNIX products, please contact SCO to obtain packages that are ready to install. You should also verify with SCO that your platform is up-to-date for the binary packages you will install. This is important if you wish to avoid data corruption problems with your installation. To build Samba for SCO UNIX products may require significant patching of Samba source code. It is much easier to obtain binary packages directly from SCO.

DNIX

DNIX has a problem with seteuid() and setegid(). These routines are needed for Samba to work correctly, but they were left out of the DNIX C library for some reason.

For this reason Samba by default defines the macro NO_EID in the DNIX section of includes.h. This works around the problem in a limited way, but it is far from ideal, and some things still will not work right.

To fix the problem properly, you need to assemble the following two functions and then either add them to your C library or link them into Samba. Put the following in the file setegid.s:

        .globl  _setegid
_setegid:
        moveq   #47,d0
        movl    #100,a0
        moveq   #1,d1
        movl    4(sp),a1
        trap    #9
        bccs    1$
        jmp     cerror
1$:
        clrl    d0
        rts

Put this in the file seteuid.s:

        .globl  _seteuid
_seteuid:
        moveq   #47,d0
        movl    #100,a0
        moveq   #0,d1
        movl    4(sp),a1
        trap    #9
        bccs    1$
        jmp     cerror
1$:
        clrl    d0
        rts

After creating the above files, you then assemble them using

$ as seteuid.s
$ as setegid.s

that should produce the files seteuid.o and setegid.o

Then you need to add these to the LIBSM line in the DNIX section of the Samba Makefile. Your LIBSM line will then look something like this:

LIBSM = setegid.o seteuid.o -ln

You should then remove the line:

#define NO_EID

from the DNIX section of includes.h.

Red Hat Linux

By default during installation, some versions of Red Hat Linux add an entry to /etc/hosts as follows:

	127.0.0.1 loopback "hostname"."domainname"

This causes Samba to loop back onto the loopback interface. The result is that Samba fails to communicate correctly with the world and therefore may fail to correctly negotiate who is the master browse list holder and who is the master browser.

Corrective Action: Delete the entry after the word "loopback" in the line starting 127.0.0.1.

AIX

Sequential Read Ahead

Disabling Sequential Read Ahead using vmtune -r 0 improves Samba performance significantly.

Solaris

Locking Improvements

Some people have been experiencing problems with F_SETLKW64/fcntl when running Samba on Solaris. The built-in file locking mechanism was not scalable. Performance would degrade to the point where processes would get into loops of trying to lock a file. It would try a lock, then fail, then try again. The lock attempt was failing before the grant was occurring. So the visible manifestation of this would be a handful of processes stealing all of the CPU, and when they were trussed they would be stuck if F_SETLKW64 loops.

Sun released patches for Solaris 2.6, 8, and 9. The patch for Solaris 7 has not been released yet.

The patch revision for 2.6 is 105181-34, for 8 is 108528-19 and for 9 is 112233-04.

After the install of these patches, it is recommended to reconfigure and rebuild Samba.

Thanks to Joe Meslovich for reporting this.

Winbind on Solaris 9

Nsswitch on Solaris 9 refuses to use the Winbind NSS module. This behavior is fixed by Sun in patch 113476-05, which as of March 2003, is not in any roll-up packages.

Chapter 38. Samba and Other CIFS Clients

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Dan Shearer

Samba Team

Jim McDonough

OS/2

5 Mar 2001

This chapter contains client-specific information.

Macintosh Clients

Yes. Thursby has a CIFS Client/Server called DAVE. They test it against Windows 95, Windows NT /200x/XP and Samba for compatibility issues. At the time of this writing, DAVE was at version 4.1. Please refer to Thursby's Web site for more information regarding this product.

Alternatives There are two free implementations of AppleTalk for several kinds of UNIX machines and several more commercial ones. These products allow you to run file services and print services natively to Macintosh users, with no additional support required on the Macintosh. The two free implementations are Netatalk, and CAP. What Samba offers MS Windows users, these packages offer to Macs. For more info on these packages, Samba, and Linux (and other UNIX-based systems), see http://www.eats.com/linux_mac_win.html.

Newer versions of the Macintosh (Mac OS X) include Samba.

OS2 Client

Configuring OS/2 Warp Connect or OS/2 Warp 4

Basically, you need three components:

  • The File and Print Client (IBM Peer)
  • TCP/IP (Internet support)
  • The “NetBIOS over TCP/IP” driver (TCPBEUI)

Installing the first two together with the base operating system on a blank system is explained in the Warp manual. If Warp has already been installed, but you now want to install the networking support, use the “Selective Install for Networking” object in the “System Setup” folder.

Adding the “NetBIOS over TCP/IP” driver is not described in the manual and just barely in the online documentation. Start MPTS.EXE, click on OK, click on Configure LAPS and click on IBM OS/2 NETBIOS OVER TCP/IP in Protocols. This line is then moved to Current Configuration. Select that line, click on Change number and increase it from 0 to 1. Save this configuration.

If the Samba server is not on your local subnet, you can optionally add IP names and addresses of these servers to the Names List, or specify a WINS server (NetBIOS Nameserver in IBM and RFC terminology). For Warp Connect, you may need to download an update for IBM Peer to bring it on the same level as Warp 4. See the Web page mentioned above.

Configuring Other Versions of OS/2

This sections deals with configuring OS/2 Warp 3 (not Connect), OS/2 1.2, 1.3 or 2.x.

You can use the free Microsoft LAN Manager 2.2c Client for OS/2 that is available from ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/. In a nutshell, edit the file \OS2VER in the root directory of the OS/2 boot partition and add the lines:

		20=setup.exe
		20=netwksta.sys
		20=netvdd.sys
		

before you install the client. Also, do not use the included NE2000 driver because it is buggy. Try the NE2000 or NS2000 driver from ftp://ftp.cdrom.com/pub/os2/network/ndis/ instead.

Printer Driver Download for OS/2 Clients

Create a share called [PRINTDRV] that is world-readable. Copy your OS/2 driver files there. The .EA_ files must still be separate, so you will need to use the original install files and not copy an installed driver from an OS/2 system.

Install the NT driver first for that printer. Then, add to your smb.conf a parameter, os2 driver map = filename. Next, in the file specified by filename, map the name of the NT driver name to the OS/2 driver name as follows:

nt driver name = os2 driver name.device name, e.g.

HP LaserJet 5L = LASERJET.HP LaserJet 5L

You can have multiple drivers mapped in this file.

If you only specify the OS/2 driver name, and not the device name, the first attempt to download the driver will actually download the files, but the OS/2 client will tell you the driver is not available. On the second attempt, it will work. This is fixed simply by adding the device name to the mapping, after which it will work on the first attempt.

Windows for Workgroups

Latest TCP/IP Stack from Microsoft

Use the latest TCP/IP stack from Microsoft if you use Windows for Workgroups. The early TCP/IP stacks had lots of bugs.

Microsoft has released an incremental upgrade to their TCP/IP 32-bit VxD drivers. The latest release can be found on their ftp site at ftp.microsoft.com, located in /peropsys/windows/public/tcpip/wfwt32.exe. There is an update.txt file there that describes the problems that were fixed. New files include WINSOCK.DLL, TELNET.EXE, WSOCK.386, VNBT.386, WSTCP.386, TRACERT.EXE, NETSTAT.EXE, and NBTSTAT.EXE.

Delete .pwl Files After Password Change

Windows for Workgroups does a lousy job with passwords. When you change passwords on either the UNIX box or the PC, the safest thing to do is to delete the .pwl files in the Windows directory. The PC will complain about not finding the files, but will soon get over it, allowing you to enter the new password.

If you do not do this, you may find that Windows for Workgroups remembers and uses the old password, even if you told it a new one.

Often Windows for Workgroups will totally ignore a password you give it in a dialog box.

Configuring Windows for Workgroups Password Handling

There is a program call admincfg.exe on the last disk (disk 8) of the WFW 3.11 disk set. To install it, type EXPAND A:\ADMINCFG.EX_ C:\WINDOWS\ADMINCFG.EXE. Then add an icon for it via the Program Manager New Menu. This program allows you to control how WFW handles passwords, i.e., Disable Password Caching and so on. for use with security = user.

Password Case Sensitivity

Windows for Workgroups uppercases the password before sending it to the server. UNIX passwords can be case-sensitive though. Check the smb.conf information on password level to specify what characters Samba should try to uppercase when checking.

Use TCP/IP as Default Protocol

To support print queue reporting, you may find that you have to use TCP/IP as the default protocol under Windows for Workgroups. For some reason, if you leave NetBEUI as the default, it may break the print queue reporting on some systems. It is presumably a Windows for Workgroups bug.

Speed Improvement

Note that some people have found that setting DefaultRcvWindow in the [MSTCP] section of the SYSTEM.INI file under Windows for Workgroups to 3072 gives a big improvement.

My own experience with DefaultRcvWindow is that I get a much better performance with a large value (16384 or larger). Other people have reported that anything over 3072 slows things down enormously. One person even reported a speed drop of a factor of 30 when he went from 3072 to 8192.

Windows 95/98

When using Windows 95 OEM SR2, the following updates are recommended where Samba is being used. Please note that the above change will effect you once these updates have been installed.

There are more updates than the ones mentioned here. You are referred to the Microsoft Web site for all currently available updates to your specific version of Windows 95.

Kernel Update: KRNLUPD.EXE
Ping Fix: PINGUPD.EXE
RPC Update: RPCRTUPD.EXE
TCP/IP Update: VIPUPD.EXE
Redirector Update: VRDRUPD.EXE

Also, if using MS Outlook, it is desirable to install the OLEUPD.EXE fix. This fix may stop your machine from hanging for an extended period when exiting Outlook and you may notice a significant speedup when accessing network neighborhood services.

Speed Improvement

Configure the Windows 95 TCP/IP registry settings to give better performance. I use a program called MTUSPEED.exe that I got off the Internet. There are various other utilities of this type freely available.

Windows 2000 Service Pack 2

There are several annoyances with Windows 2000 SP2. One of which only appears when using a Samba server to host user profiles to Windows 2000 SP2 clients in a Windows domain. This assumes that Samba is a member of the domain, but the problem will most likely occur if it is not.

In order to serve profiles successfully to Windows 2000 SP2 clients (when not operating as a PDC), Samba must have nt acl support = no added to the file share which houses the roaming profiles. If this is not done, then the Windows 2000 SP2 client will complain about not being able to access the profile (Access Denied) and create multiple copies of it on disk (DOMAIN.user.001, DOMAIN.user.002, and so on). See the smb.conf man page for more details on this option. Also note that the nt acl support parameter was formally a global parameter in releases prior to Samba 2.2.2.

provides a minimal profile share.

Example 38.1. Minimal profile share

[profile]
path = /export/profile
create mask = 0600
directory mask = 0700
nt acl support = no
read only = no

The reason for this bug is that the Windows 200x SP2 client copies the security descriptor for the profile that contains the Samba server's SID, and not the domain SID. The client compares the SID for SAMBA\user and realizes it is different from the one assigned to DOMAIN\user. Hence, the reason for the access denied message.

By disabling the nt acl support parameter, Samba will send the Windows 200x client a response to the QuerySecurityDescriptor trans2 call, which causes the client to set a default ACL for the profile. This default ACL includes:

DOMAIN\user “Full Control>

Note

This bug does not occur when using Winbind to create accounts on the Samba host for Domain users.

Windows NT 3.1

If you have problems communicating across routers with Windows NT 3.1 workstations, read this Microsoft Knowledge Base article.

Chapter 39. Samba Performance Tuning

Paul Cochrane

Dundee Limb Fitting Centre

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Comparisons

The Samba server uses TCP to talk to the client. Thus if you are trying to see if it performs well, you should really compare it to programs that use the same protocol. The most readily available programs for file transfer that use TCP are ftp or another TCP-based SMB server.

If you want to test against something like an NT or Windows for Workgroups server, then you will have to disable all but TCP on either the client or server. Otherwise, you may well be using a totally different protocol (such as NetBEUI) and comparisons may not be valid.

Generally, you should find that Samba performs similarly to ftp at raw transfer speed. It should perform quite a bit faster than NFS, although this depends on your system.

Several people have done comparisons between Samba and Novell, NFS or Windows NT. In some cases Samba performed the best, in others the worst. I suspect the biggest factor is not Samba versus some other system, but the hardware and drivers used on the various systems. Given similar hardware, Samba should certainly be competitive in speed with other systems.

Socket Options

There are a number of socket options that can greatly affect the performance of a TCP-based server like Samba.

The socket options that Samba uses are settable both on the command line with the -O option, or in the smb.conf file.

The socket options section of the smb.conf manual page describes how to set these and gives recommendations.

Getting the socket options correct can make a big difference to your performance, but getting them wrong can degrade it by just as much. The correct settings are very dependent on your local network.

The socket option TCP_NODELAY is the one that seems to make the biggest single difference for most networks. Many people report that adding socket options = TCP_NODELAY doubles the read performance of a Samba drive. The best explanation I have seen for this is that the Microsoft TCP/IP stack is slow in sending TCP ACKs.

Read Size

The option read size affects the overlap of disk reads/writes with network reads/writes. If the amount of data being transferred in several of the SMB commands (currently SMBwrite, SMBwriteX and SMBreadbraw) is larger than this value, then the server begins writing the data before it has received the whole packet from the network, or in the case of SMBreadbraw, it begins writing to the network before all the data has been read from disk.

This overlapping works best when the speeds of disk and network access are similar, having little effect when the speed of one is much greater than the other.

The default value is 16384, but little experimentation has been done as yet to determine the optimal value, and it is likely that the best value will vary greatly between systems anyway. A value over 65536 is pointless and will cause you to allocate memory unnecessarily.

Max Xmit

At startup the client and server negotiate a maximum transmit size, which limits the size of nearly all SMB commands. You can set the maximum size that Samba will negotiate using the max xmit option in smb.conf. Note that this is the maximum size of SMB requests that Samba will accept, but not the maximum size that the client will accept. The client maximum receive size is sent to Samba by the client and Samba honors this limit.

It defaults to 65536 bytes (the maximum), but it is possible that some clients may perform better with a smaller transmit unit. Trying values of less than 2048 is likely to cause severe problems. In most cases the default is the best option.

Log Level

If you set the log level (also known as debug level) higher than 2 then you may suffer a large drop in performance. This is because the server flushes the log file after each operation, which can be quite expensive.

Read Raw

The read raw operation is designed to be an optimized, low-latency file read operation. A server may choose to not support it, however, and Samba makes support for read raw optional, with it being enabled by default.

In some cases clients do not handle read raw very well and actually get lower performance using it than they get using the conventional read operations.

So you might like to try read raw = no and see what happens on your network. It might lower, raise or not effect your performance. Only testing can really tell.

Write Raw

The write raw operation is designed to be an optimized, low-latency file write operation. A server may choose to not support it, however, and Samba makes support for write raw optional, with it being enabled by default.

Some machines may find write raw slower than normal write, in which case you may wish to change this option.

Slow Logins

Slow logins are almost always due to the password checking time. Using the lowest practical password level will improve things.

Client Tuning

Often a speed problem can be traced to the client. The client (for example Windows for Workgroups) can often be tuned for better TCP performance. Check the sections on the various clients in .

Samba Performance Problem Due to Changing Linux Kernel

A user wrote the following to the mailing list:

I am running Gentoo on my server and Samba 2.2.8a. Recently I changed kernel version from linux-2.4.19-gentoo-r10 to linux-2.4.20-wolk4.0s. And now I have a performance issue with Samba. Many of you will probably say, “Move to vanilla sources!” Well, I tried that and it didn't work. I have a 100mb LAN and two computers (Linux and Windows 2000). The Linux server shares directories with DivX files, the client (Windows 2000) plays them via LAN. Before when I was running the 2.4.19 kernel everything was fine, but now movies freeze and stop. I tried moving files between the server and Windows and it is terribly slow.

The answer he was given is:

Grab the mii-tool and check the duplex settings on the NIC. My guess is that it is a link layer issue, not an application layer problem. Also run ifconfig and verify that the framing error, collisions, and so on, look normal for ethernet.

Corrupt tdb Files

Our Samba PDC server has been hosting three TB of data to our 500+ users [Windows NT/XP] for the last three years using Samba without a problem. Today all shares went very slow. Also the main smbd kept spawning new processes so we had 1600+ running smbd's (normally we avg. 250). It crashed the SUN E3500 cluster twice. After a lot of searching, I decided to rm /var/locks/*.tdb. Happy again.

Question: Is there any method of keeping the *.tdb files in top condition or how can I detect early corruption?

Answer: Yes, run tdbbackup each time after stopping nmbd and before starting nmbd.

Question: What I also would like to mention is that the service latency seems a lot lower than before the locks cleanup. Any ideas on keeping it top notch?

Answer: Yes. Same answer as for previous question!

Chapter 40. DNS and DHCP Configuration Guide

John H. Terpstra

Samba Team

Table of Contents

Note

Note

This chapter did not make it into this release. It is planned for the published release of this document.

Chapter 41. Further Resources

Jelmer R. Vernooij

The Samba Team

May 1, 2003

Websites

  • CIFS: Common Insecurities Fail Scrutiny by Hobbit

  • Doing the Samba on Windows by Financial Review

  • Implementing CIFS by Christopher R. Hertel

  • Just What Is SMB? by Richard Sharpe

  • Opening Windows Everywhere by Mike Warfield

  • SMB HOWTO by David Wood

  • SMB/CIFS by The Root by ledin

  • The Story of Samba by Christopher R. Hertel

  • The Unofficial Samba HOWTO by David Lechnyr

  • Understanding the Network Neighborhood by Christopher R. Hertel

  • Using Samba as a PDC by Andrew Bartlett

  • PDF version of the Troubleshooting Techniques chapter from the second edition of Sam's Teach Yourself Samba in 24 Hours (publishing date of Dec. 12, 2001)

  • Slide presentations by Samba Team members

  • Introduction to Samba-3.0 by Motonobu Takahashi (written in Japanese).

  • Understanding the Network Neighborhood, by team member Chris Hertel. This article appeared in the May 2001 issue of Linux Magazine.

  • Samba 2.0.x Troubleshooting guide from Paul Green

  • Ten Years of Samba

  • Samba Authenticated Gateway HOWTO

  • An Introduction to Samba

  • What is CIFS?

  • WFWG: Password Caching and How It Affects LAN Manager Security at Microsoft Knowledge Base

Related updates from Microsoft

  • Enhanced Encryption for Windows 95 Password Cache

  • Windows '95 File Sharing Updates

  • Windows for Workgroups Sharing Updates

Index

D

daemon, Alternative: Starting smbd as a Daemon
DDK, PostScript Drivers with No Major Problems Even in Kernel Mode, CUPS PostScript Driver for Windows NT/200x/XP
debug, Internal Errors
debug level, Debugging with Samba Itself, Log Level
debuglevel, Debug Levels
default case, Miscellaneous Controls
default profile, Default Profile for Windows Users, Changing the Default Profile
delete printer command, Adding New Printers with the Windows NT APW
delete roaming profiles, MS Windows 200x/XP
DHCP, Background Information
diff, Patches
directory mask, File and Directory Permissions-Based Controls
directory security mask, Interaction with the Standard Samba create mask Parameters
Directory Separators, MS Windows NTFS Comparison with UNIX File Systems
display charset, Samba and Charsets, Enabling SWAT Internationalization Support
DNS, TCP/IP without NetBIOS, DNS Lookup
Active Directory, DNS and Active Directory
Dynamic, Background Information
dns proxy, What Is Browsing?
domain admin group, Group Mapping MS Windows and UNIX
Domain Admins group, Discussion
domain logons, Preparing for Domain Control
domain master, Domain Network Logon Service, Example Configuration, What Is Browsing?, Making Samba the Domain Master
Domain Member, Domain Security Mode (User Level Security)
joining, Example Configuration
domain security, Features and Benefits
Domain Users group, Adding Domain Users to the Power Users Group
dont descend, Miscellaneous Controls
dos charset, Samba and Charsets, Japanese Charsets, CP850.so Can't Be Found
dos filemode, File and Directory Permissions-Based Controls
dos filetime resolution, Miscellaneous Controls
dos filetimes, Miscellaneous Controls
Drive Identification, MS Windows NTFS Comparison with UNIX File Systems

F

fake oplocks, Miscellaneous Controls
File Naming Conventions, MS Windows NTFS Comparison with UNIX File Systems
File System, MS Windows NTFS Comparison with UNIX File Systems
case sensitivity, MS Windows NTFS Comparison with UNIX File Systems
feature comparison, MS Windows NTFS Comparison with UNIX File Systems
UNIX, MS Windows NTFS Comparison with UNIX File Systems
Windows, MS Windows NTFS Comparison with UNIX File Systems
flush name cache, How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
foomatic, Using Windows-Formatted Vendor PPDs, The CUPS Filtering Architecture, The Role of cupsomatic/foomatic, cupsomatic/foomatic-rip Versus native CUPS Printing, foomatic-rip and Foomatic Explained, Foomatic's Strange Name
foomatic-rip, cupsomatic/foomatic-rip Versus native CUPS Printing, CUPS Print Drivers from Linuxprinting.org, foomatic-rip and Foomatic Explained, The Grand Unification Achieved
force create mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
force directory mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
force directory security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
force group, User and Group-Based Controls
force security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
force user, User and Group-Based Controls, File Operations Done as root with force user Set, Beware of Force User
ftp, Accessing the Samba Sources via rsync and ftp

L

ldap admin dn, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
ldap delete dn, Configuring Samba
ldap filter, Configuring Samba
ldap group suffix, Configuring Samba
ldap idmap suffix, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
ldap machine suffix, Configuring Samba
ldap passwd sync, Configuring Samba, Password Synchronization
ldap ssl, Configuring Samba, Security and sambaSamAccount
ldap suffix, Backup Domain Controller Configuration, Configuring Samba
ldap user suffix, Configuring Samba
libnss_wins.so, /etc/nsswitch.conf
Links
hard, MS Windows NTFS Comparison with UNIX File Systems
soft, MS Windows NTFS Comparison with UNIX File Systems
Linuxprinting.org, CUPS Print Drivers from Linuxprinting.org
lm announce, What Is Browsing?
lm interval, What Is Browsing?
LMB (see Local Master Browser)
LMHOSTS, The LMHOSTS File
load printers, Rapid Configuration Validation, The [global] Section
local master, What Is Browsing?, Configuring WORKGROUP Browsing
Local Master Browser, NetBIOS over TCP/IP, Use of the Remote Announce Parameter
locking, Discussion
locking.tdb, The Printing *.tdb Files
(see also TDB)
log files
monitoring, Assumptions
log level, Adding Machine to Domain Fails, Problem Resolution, extd_audit, Debug Levels
logon drive, Windows NT4 Workstation
logon home, LDAP Special Attributes for sambaSamAccounts, Windows 9x/Me User Profiles, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
logon path, LDAP Special Attributes for sambaSamAccounts, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows 9x/Me Profile Setup, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
logon script, LDAP Special Attributes for sambaSamAccounts
lpadmin, CUPS Print Drivers from Linuxprinting.org, Setting Up Quotas
lppause command, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions
lpq cache time, The [global] Section
lpq command, Linking smbd with libcups.so, Pre-Conditions
lpresume command, Linking smbd with libcups.so, Pre-Conditions
lprm command, Linking smbd with libcups.so, Pre-Conditions
lpstat, Troubleshooting Revisited

P

page_log, The page_log File Syntax
passdb backend, MS Windows Workstation/Server Machine Trust Accounts, Account Information Databases, Technical Information, The pdbedit Command, Configuring Samba, Configuring, Users Cannot Logon, Configuration of auth methods, Remote CIFS Authentication Using winbindd.so, Quick Migration Guide, Passdb Backends and Authentication
password level, Password Checking, The Tests, Password Case Sensitivity, Slow Logins
password server, Server Security (User Level Security), Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Configure smb.conf, The Tests
patch, Patches
path, The [printers] Section, Any [my_printer_name] Section, Print Commands, Creating the [print$] Share, [print$] Section Parameters, The [print$] Share Directory, Samba Receiving Jobfiles and Passing Them to CUPS, Auto-Deletion or Preservation of CUPS Spool Files, Permissions on /var/spool/samba/ Get Reset After Each Reboot, The Tests
PCL, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, Driver Execution on the Server, Network PostScript RIP
pdbedit, New Backends, Account Management Tools, The pdbedit Command, XML, Passdb Backends and Authentication, Steps in Migration Process, Samba-3 Implementation Choices
PDF, Windows Drivers, GDI and EMF, PostScript Printer Description (PPD) Specification
pdf, MIME Type Conversion Rules
PDL, GDI on Windows -- PostScript on UNIX, PostScript and Ghostscript
permissions
file/directory ACLs, Managing UNIX Permissions Using NT Security Dialogs
share, Share Definition Access Controls
share ACLs, Access Controls on Shares
UNIX file and directory, Features and Benefits
PGP, Verifying Samba's PGP Signature
PJL, Network PostScript RIP, Windows CUPS PostScript Driver Versus Adobe Driver, Adobe and CUPS PostScript Drivers for Windows Clients
point 'n' print, Installation of Windows Client Drivers, Driver Upload Methods, The Role of cupsomatic/foomatic, Run cupsaddsmb (Quiet Mode), Installing the PostScript Driver on a Client, Manual Driver Installation in 15 Steps
PostScript, Advanced Intelligent Printing with PostScript Driver Download, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, PostScript and Ghostscript, Prefilters, Driver Execution on the Server, Network PostScript RIP, CUPS: A Magical Stone?, CUPS PostScript Driver for Windows NT/200x/XP
(see also Ghostscript)
RIP, PostScript and Ghostscript
PPD, PostScript and Ghostscript, PostScript Printer Description (PPD) Specification, PostScript Printer Descriptions (PPDs) for Non-PS Printers, PPDs for Non-PS Printers on UNIX, PPDs for Non-PS Printers on Windows, CUPS: A Magical Stone?, Installing the PostScript Driver on a Client
CUPS (see CUPS-PPD)
preferred master, What Is Browsing?, Configuring WORKGROUP Browsing, Forcing Samba to Be the Master, Making Samba the Domain Master, The Tests
preserve case, Windows 9x/Me Profile Setup
print command, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
printable, The [printers] Section, Any [my_printer_name] Section
printcap, Default UNIX System Printing Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, Pre-Conditions
printcap name, The [global] Section
printer admin, The [global] Section, Any [my_printer_name] Section, [print$] Section Parameters, Add Printer Wizard Driver Installation, First Client Driver Installation, Setting Device Modes on New Printers, Always Make First Client Connection as root or printer admin, Setting Default Print Options for Client Drivers, Adding New Printers with the Windows NT APW, More Complex CUPS smb.conf Settings, Requirements for adddriver and setdriver to Succeed, Print Options for All Users Can't Be Set on Windows 200x/XP
printing, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
printing.tdb, The Printing *.tdb Files
(see also TDB)
PrintPro (see ESP Print Pro)
public, The [printers] Section

Q

queue resume command, Linking smbd with libcups.so
queuepause command, Linking smbd with libcups.so

R

raw printing, Central Print Serving, Explicitly Enable raw Printing for application/octet-stream
read list, User and Group-Based Controls
read only, Miscellaneous Controls, The [printers] Section, [print$] Section Parameters
read raw, Read Raw
read size, Read Size
Relative Identifier (see RID)
remote announce, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Announce Parameter, Browsing Support in Samba
remote browse sync, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Browse Sync Parameter
replication, Features and Benefits
browse lists, Cross-Subnet Browsing
SAM, Domain Controller Types, Features and Benefits, MS Windows NT4-style Domain Control, Backup Domain Controller Configuration, Can Samba Be a Backup Domain Controller to an NT4 PDC?, How Do I Replicate the smbpasswd File?
WINS, NetBIOS over TCP/IP, WINS Server Configuration, WINS Replication
RID, Default Users, Groups and Relative Identifiers
roaming profiles, Disabling Roaming Profile Support
root preexec, Logon Scripts
rpcclient
adddriver, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Understanding the rpcclient man Page, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
enumdrivers, Installing PostScript Driver Files Manually Using rpcclient, Manual Driver Installation in 15 Steps
enumports, Installing PostScript Driver Files Manually Using rpcclient
enumprinters, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
getdriver, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps
getprinter, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
setdriver, Caveats to be Considered, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
rsync, Accessing the Samba Sources via rsync and ftp
rundll32, Adding Printers without User Intervention

S

SAM, Features and Benefits, Domain Controller Types, Features and Benefits, Result Caching
SAM backend
LDAP, Features and Benefits
ldapsam, Features and Benefits, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, ldapsam
ldapsam_compat, Features and Benefits
mysqlsam, Features and Benefits, MySQL
non-LDAP, Features and Benefits
smbpasswd, Features and Benefits, smbpasswd Encrypted Password Database
tdbsam, Features and Benefits, Features and Benefits, tdbsam
xmlsam, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, XML
schannel, Cannot Log onto Domain Member Workstation After Joining Domain
secrets.tdb, The Printing *.tdb Files
(see also TDB)
security, Samba Security Modes, Domain Security Mode (User Level Security), Server Security (User Level Security), What Makes Samba a Server?, What Makes Samba a Domain Controller?, What Makes Samba a Domain Member?, Constantly Losing Connections to Password Server, Preparing for Domain Control, Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Why Is This Better Than security = server?, Configure smb.conf, Run cupsaddsmb (Quiet Mode), cupsaddsmb Keeps Asking for Root Password in Never-ending Loop, Passdb Backends and Authentication, The Tests, Configuring Windows for Workgroups Password Handling
security mask, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
Security Mode, Samba Security Modes
Server Manager, MS Windows Workstation/Server Machine Trust Accounts, Manual Creation of Machine Trust Accounts, Remote Server Administration
Server Type, Server Types
Domain Member, Example Configuration, Example Configuration, Features and Benefits
sessionid.tdb, The Printing *.tdb Files
(see also TDB)
share_info.tdb, The Printing *.tdb Files
(see also TDB)
short preserve case, Miscellaneous Controls, Windows 9x/Me Profile Setup
Short-Cuts, MS Windows NTFS Comparison with UNIX File Systems
show add printer wizard, The [global] Section, Adding New Printers with the Windows NT APW
SID, Features and Benefits, The System Cannot Log You On (C000019B), Backup Domain Controller Configuration, Technical Information, Features and Benefits, Side Bar Notes, Get SID, Profile Migration/Creation
signing, Cannot Log onto Domain Member Workstation After Joining Domain
simple configuration, Example Configuration
Single Sign On, Caveats to be Considered
slow browsing, Browsing of Shares and Directories is Very Slow
smbclient, Testing with smbclient, The Tests
smbgrpadd.sh, Sample smb.conf Add Group Script
socket options, Socket Options
spooling
central, Central Spooling vs. Peer-to-Peer Printing
peer-to-peer, Central Spooling vs. Peer-to-Peer Printing
spooling-only, Raw Print Serving Vendor Drivers on Windows Clients
SRVTOOLS.EXE, Managing Domain Machine Accounts using NT4 Server Manager, Remote Server Administration
strict locking, Discussion
swat, SWAT
enable, Enabling SWAT for Use
security, Securing SWAT through SSL
System Policy Editor, Creating and Managing System Policies, Administration of Windows 200x/XP Policies