Table of Contents
Binary packages of Samba are included in almost any Linux or
UNIX distribution. There are also some packages available at
If you need to compile Samba from source, check .
Samba's configuration is stored in the smb.conf file, which usually resides in /etc/samba/smb.conf or /usr/local/samba/lib/smb.conf. You can either edit this file yourself or do it using one of the many graphical tools that are available, such as the Web-based interface SWAT, that is included with Samba.
The smb.conf file uses the same syntax as the various old .ini files in Windows 3.1: Each file consists of various sections, which are started by putting the section name between brackets ([]) on a new line. Each contains zero or more key/value-pairs seperated by an equality sign (=). The file is just a plain-text file, so you can open and edit it with your favorite editing tool.
Each section in the smb.conf file represents a share on the Samba server. The section “global” is special, since it contains settings that apply to the whole Samba server and not to one share in particular.
There are sample configuration files in the examples subdirectory in the distribution. It is suggested you read them carefully so you can see how the options go together in practice. See the man page for all the options. It might be worthwhile to start out with the smb.conf.default configuration file and adapt it to your needs. It contains plenty of comments.
The simplest useful configuration file would contain something like shown in .
Example 2.2. Another simple smb.conf File
| [global] |
| workgroup = MIDEARTH |
| [homes] |
| guest ok = no |
| read only = no |
This will allow connections by anyone with an account on the server, using either their login name or homes as the service name. (Note: The workgroup that Samba should appear in must also be set. The default workgroup name is WORKGROUP.)
Make sure you put the smb.conf file in the correct place.
For more information about security settings for the [homes] share please refer to .
It's important to validate the contents of the smb.conf file using the testparm program. If testparm runs correctly, it will list the loaded services. If not, it will give an error message. Make sure it runs correctly and that the services look reasonable before proceeding. Enter the command:
root# testparm /etc/samba/smb.conf
Testparm will parse your configuration file and report any unknown parameters or incorrect syntax.
Always run testparm again whenever the smb.conf file is changed!
SWAT is a Web-based interface that can be used to facilitate the configuration of Samba. SWAT might not be available in the Samba package that shipped with your platform, but in a separate package. Please read the SWAT manpage on compiling, installing and configuring SWAT from source.
To launch SWAT, just run your favorite Web browser and point it to
SWAT can be used from a browser on any IP-connected machine, but be aware that connecting from a remote machine leaves your connection open to password sniffing as passwords will be sent over the wire in the clear.
More information about SWAT can be found in .
To list shares that are available from the configured Samba server execute the following command:
$ smbclient -L yourhostname
You should see a list of shares available on your server. If you do not, then something is incorrectly configured. This method can also be used to see what shares are available on other SMB servers, such as Windows 2000.
If you choose user-level security you may find that Samba requests a password before it will list the shares. See the smbclient man page for details. You can force it to list the shares without a password by adding the option -N to the command line.
Enter the following command:
$ smbclient //yourhostname/aservice
Typically yourhostname is the name of the host on which smbd has been installed. The aservice is any service that has been defined in the smb.conf file. Try your user name if you just have a [homes] section in the smb.conf file.
Example: If the UNIX host is called bambi and a valid login name is fred, you would type:
$ smbclient //bambi/fred
Now that Samba is working correctly locally, you can try to access it from other clients. Within a few minutes, the Samba host should be listed in the Network Neighborhood on all Windows clients of its subnet. Try browsing the server from another client or 'mounting' it.
Mounting disks from a DOS, Windows or OS/2 client can be done by running a command such as:
C:\> net use d: \\servername\service
Try printing, e.g.
C:\> net use lpt1: \\servername\spoolservice
C:\> print filename
You might want to read . If you are still stuck, refer to . Samba has been successfully installed at thousands of sites worldwide. It is unlikely that your particular problem is unique, so it might be productive to perform an Internet search to see if someone else has encountered your problem and has found a way to overcome it.
The following questions and issues are raised repeatedly on the Samba mailing list.
Samba consists of three core programs: nmbd, smbd, and winbindd. nmbd is the name server message daemon, smbd is the server message daemon, and winbindd is the daemon that handles communication with Domain Controllers.
If Samba is not running as a WINS server, then there will be one single instance of nmbd running on your system. If it is running as a WINS server then there will be two instances one to handle the WINS requests.
smbd handles all connection requests. It spawns a new process for each client connection made. That is why you may see so many of them, one per client connection.
winbindd will run as one or two daemons, depending on whether or not it is being run in split mode (in which case there will be two instances).
An error message is observed in the log files when smbd is started: “open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested.”
Your loopback device isn't working correctly. Make sure it is configured correctly. The loopback device is an internal (virtual) network device with the IP address 127.0.0.1. Read your OS documentation for details on how to configure the loopback on your system.
This error can be caused by one of these misconfigurations:
You specified an nonexisting path for the share in smb.conf.
The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible.
The share you are trying to access does not exist.