Table of Contents
Samba-3 implements a new capability to work concurrently with multiple account backends. The possible new combinations of password backends allows Samba-3 a degree of flexibility and scalability that previously could be achieved only with MS Windows Active Directory. This chapter describes the new functionality and how to get the most out of it.
In the course of development of Samba-3, a number of requests were received to provide the ability to migrate MS Windows NT4 SAM accounts to Samba-3 without the need to provide matching Unix/Linux accounts. We called this the Non Unix Accounts (NUA) capability. The intent was that an administrator could decide to use the tdbsam backend and by simply specifying "passdb backend = tdbsam_nua, guest" this would allow Samba-3 to implement a solution that did not use Unix accounts per se. Late in the development cycle, the team doing this work hit upon some obstacles that prevents this solution from being used. Given the delays with Samba-3 release a decision was made to NOT deliver this functionality until a better method of recognising NT Group SIDs from NT User SIDs could be found. This feature may thus return during the life cycle for the Samba-3 series.
Samba-3.0.0 does NOT support Non-Unix Account (NUA) operation.
Samba-3 provides for complete backwards compatibility with Samba-2.2.x functionality as follows:
Backwards Compatibility Backends
This option uses nothing but the Unix/Linux /etc/passwd style back end. On systems that have PAM (Pluggable Authentication Modules) support all PAM modules are supported. The behaviour is just as it was with Samba-2.2.x, and the protocol limitations imposed by MS Windows clients apply likewise.
This option allows continues use of the smbpasswd file that maintains a plain ASCII (text) layout that includes the MS Windows LanMan and NT encrypted passwords as well as a field that stores some account information. This form of password backend does NOT store any of the MS Windows NT/200x SAM (Security Account Manager) information needed to provide the extended controls that are needed for more comprehensive interoperation with MS Windows NT4 / 200x servers.
This backend should be used only for backwards compatibility with older versions of Samba. It may be deprecated in future releases.
There is a password backend option that allows continued operation with a existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. This option is provided primarily as a migration tool, although there is no reason to force migration at this time. Note that this tool will eventually be deprecated.
Samba-3 introduces the following new password backend capabilities:
New Backends
This is always required as the last backend specified. It provides the ability to handle guest account requirements for access to resources like IPC$ which is used for browsing.
This backend provides a rich database backend for local servers. This backend is NOT suitable for multiple domain controller (ie: PDC + one or more BDC) installations.
The tdbsam password backend stores the old smbpasswd information PLUS the extended MS Windows NT / 200x SAM information into a binary format TDB (trivial database) file. The inclusion of the extended information makes it possible for Samba-3 to implement the same account and system access controls that are possible with MS Windows NT4 and MS Windows 200x based systems.
The inclusion of the tdbsam capability is a direct response to user requests to allow simple site operation without the overhead of the complexities of running OpenLDAP. It is recommended to use this only for sites that have fewer than 250 users. For larger sites or implementations the use of OpenLDAP or of Active Directory integration is strongly recommended.
This provides a rich directory backend for distributed account installation.
Samba-3 has a new and extended LDAP implementation that requires configuration of OpenLDAP with a new format samba schema. The new format schema file is included in the examples/LDAP directory of the Samba distribution.
The new LDAP implementation significantly expands the control abilities that were possible with prior versions of Samba. It is now possible to specify "per user" profile settings, home directories, account access controls, and much more. Corporate sites will see that the Samba-Team has listened to their requests both for capability and to allow greater scalability.
It is expected that the MySQL based SAM will be very popular in some corners. This database backend will be on considerable interest to sites that want to leverage existing MySQL technology.
Allows the account and password data to be stored in an XML format data file. This backend can not be used for normal operation, it can only be used in conjunction with pdbedit's pdb2pdb functionality. The DTD that is used might be subject to changes in the future.
The xmlsam option can be useful for account migration between database backends or backups. Use of this tool will allow the data to be edited before migration into another backend format.
The NIS+ based passdb backend. Takes name NIS domain as an optional argument. Only works with Sun NIS+ servers.
Old windows clients send plain text passwords over the wire. Samba can check these passwords by crypting them and comparing them to the hash stored in the unix user database.
Newer windows clients send encrypted passwords (so-called Lanman and NT hashes) over the wire, instead of plain text passwords. The newest clients will send only encrypted passwords and refuse to send plain text passwords, unless their registry is tweaked.
These passwords can't be converted to unix style encrypted passwords. Because of that, you can't use the standard unix user database, and you have to store the Lanman and NT hashes somewhere else.
In addition to differently encrypted passwords, windows also stores certain data for each user that is not stored in a unix user database. e.g: workstations the user may logon from, the location where the users' profile is stored, and so on. Samba retrieves and stores this information using a passdb backend. Commonly available backends are LDAP, plain text file, MySQL and nisplus. For more information, see the man page for smb.conf regarding the passdb backend parameter.
The unix and SMB password encryption techniques seem similar on the surface. This similarity is, however, only skin deep. The unix scheme typically sends clear text passwords over the network when logging in. This is bad. The SMB encryption scheme never sends the cleartext password over the network but it does store the 16 byte hashed values on disk. This is also bad. Why? Because the 16 byte hashed values are a "password equivalent". You cannot derive the user's password from them, but they could potentially be used in a modified client to gain access to a server. This would require considerable technical knowledge on behalf of the attacker but is perfectly possible. You should thus treat the data stored in whatever passdb backend you use (smbpasswd file, ldap, mysql) as though it contained the cleartext passwords of all your users. Its contents must be kept secret, and the file should be protected accordingly.
Ideally we would like a password scheme that involves neither plain text passwords on the net nor on disk. Unfortunately this is not available as Samba is stuck with having to be compatible with other SMB systems (WinNT, WfWg, Win95 etc).
Windows NT 4.0 Service pack 3 changed the default setting so that plaintext passwords are disabled from being sent over the wire. This mandates either the use of encrypted password support or edit the Windows NT registry to re-enable plaintext passwords.
The following versions of MS Windows do not support full domain security protocols, although they may log onto a domain environment:
| MS DOS Network client 3.0 with the basic network redirector installed |
| Windows 95 with the network redirector update installed |
| Windows 98 [se] |
| Windows Me |
MS Windows XP Home does not have facilities to become a domain member and it can not participate in domain logons.
The following versions of MS Windows fully support domain security protocols.
| Windows NT 3.5x |
| Windows NT 4.0 |
| Windows 2000 Professional |
| Windows 200x Server/Advanced Server |
| Windows XP Professional |
All current release of Microsoft SMB/CIFS clients support authentication via the SMB Challenge/Response mechanism described here. Enabling clear text authentication does not disable the ability of the client to participate in encrypted authentication. Instead, it allows the client to negotiate either plain text _or_ encrypted password handling.
MS Windows clients will cache the encrypted password alone. Where plain text passwords are re-enabled, through the appropriate registry change, the plain text password is NEVER cached. This means that in the event that a network connections should become disconnected (broken) only the cached (encrypted) password will be sent to the resource server to affect a auto-reconnect. If the resource server does not support encrypted passwords the auto-reconnect will fail. USE OF ENCRYPTED PASSWORDS IS STRONGLY ADVISED.
Plain text passwords are not passed across the network. Someone using a network sniffer cannot just record passwords going to the SMB server.
Plain text passwords are not stored anywhere in memory or on disk.
WinNT doesn't like talking to a server that does not support encrypted passwords. It will refuse to browse the server if the server is also in user level security mode. It will insist on prompting the user for the password on each connection, which is very annoying. The only things you can do to stop this is to use SMB encryption.
Encrypted password support allows automatic share (resource) reconnects.
Encrypted passwords are essential for PDC/BDC operation.
Plain text passwords are not kept on disk, and are NOT cached in memory.
Uses same password file as other unix services such as login and ftp
Use of other services (such as telnet and ftp) which send plain text passwords over the net, so sending them for SMB isn't such a big deal.
Every operation in Unix/Linux requires a user identifier (UID), just as in MS Windows NT4 / 200x this requires a Security Identifier (SID). Samba provides two means for mapping an MS Windows user to a Unix/Linux UID.
Firstly, all Samba SAM (Security Account Manager database) accounts require a Unix/Linux UID that the account will map to. As users are added to the account information database, Samba-3 will call the add user script interface to add the account to the Samba host OS. In essence, all accounts in the local SAM require a local user account.
The second way to affect Windows SID to Unix UID mapping is via the idmap uid, idmap gid parameters in smb.conf. Please refer to the man page for information about these parameters. These parameters are essential when mapping users from a remote SAM server.
Samba-3 provides two (2) tools for management of User and machine accounts. These tools are called smbpasswd and pdbedit. A third tool is under development but is NOT expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK GUI tool that looks much like the MS Windows NT4 Domain User Manager - hopefully this will be announced in time for the Samba-3.0.1 release.
The smbpasswd utility is a utility similar to the passwd or yppasswd programs. It maintains the two 32 byte password fields in the passdb backend.
smbpasswd works in a client-server mode where it contacts the local smbd to change the user's password on its behalf. This has enormous benefits as follows:
smbpasswd has the capability to change passwords on Windows NT servers (this only works when the request is sent to the NT Primary Domain Controller if changing an NT Domain user's password).
smbpasswd can be used to:
| add user or machine accounts |
| delete user or machine accounts |
| enable user or machine accounts |
| disable user or machine accounts |
| set to NULL user passwords |
| manage interdomain trust accounts |
To run smbpasswd as a normal user just type:
$ smbpasswd Old SMB password: secret
For secret type old value here - or hit return if there was no old password
New SMB Password: new secret Repeat New SMB Password: new secret
If the old value does not match the current value stored for that user, or the two new values do not match each other, then the password will not be changed.
When invoked by an ordinary user it will only allow change of their own SMB password.
When run by root smbpasswd may take an optional argument, specifying the user name whose SMB password you wish to change. When run as root, smbpasswd does not prompt for or check the old password value, thus allowing root to set passwords for users who have forgotten their passwords.
smbpasswd is designed to work in the way familiar to UNIX users who use the passwd or yppasswd commands. While designed for administrative use, this tool provides essential user level password change capabilities.
For more details on using smbpasswd refer to the man page (the definitive reference).
pdbedit is a tool that can be used only by root. It is used to manage the passdb backend. pdbedit can be used to:
| add, remove or modify user accounts |
| listing user accounts |
| migrate user accounts |
The pdbedit tool is the only one that can manage the account security and policy settings. It is capable of all operations that smbpasswd can do as well as a super set of them.
One particularly important purpose of the pdbedit is to allow the migration of account information from one passdb backend to another. See the XML password backend section of this chapter.
The following is an example of the user account information that is stored in a tdbsam password backend. This listing was produced by running:
$ pdbedit -Lv met Unix username: met NT username: Account Flags: [UX ] User SID: S-1-5-21-1449123459-1407424037-3116680435-2004 Primary Group SID: S-1-5-21-1449123459-1407424037-3116680435-1201 Full Name: Melissa E Terpstra Home Directory: \\frodo\met\Win9Profile HomeDir Drive: H: Logon Script: scripts\logon.bat Profile Path: \\frodo\Profiles\met Domain: MIDEARTH Account desc: Workstations: melbelle Munged dial: Logon time: 0 Logoff time: Mon, 18 Jan 2038 20:14:07 GMT Kickoff time: Mon, 18 Jan 2038 20:14:07 GMT Password last set: Sat, 14 Dec 2002 14:37:03 GMT Password can change: Sat, 14 Dec 2002 14:37:03 GMT Password must change: Mon, 18 Jan 2038 20:14:07 GMT
Samba-3 offers the greatest flexibility in backend account database design of any SMB/CIFS server technology available today. The flexibility is immediately obvious as one begins to explore this capability.
It is possible to specify not only multiple different password backends, but even multiple backends of the same type. For example, to use two different tdbsam databases:
[globals] passdb backend = tdbsam:/etc/samba/passdb.tdb, \ tdbsam:/etc/samba/old-passdb.tdb, guest
Older versions of Samba retrieved user information from the unix user database and eventually some other fields from the file /etc/samba/smbpasswd or /etc/smbpasswd. When password encryption is disabled, no SMB specific data is stored at all. Instead all operations are conducted via the way that the Samba host OS will access its /etc/passwd database. eg: On Linux systems that is done via PAM.
Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account information such as username, LM/NT password hashes, password change times, and account flags have been stored in the smbpasswd(5) file. There are several disadvantages to this approach for sites with very large numbers of users (counted in the thousands).
The first is that all lookups must be performed sequentially. Given that there are approximately two lookups per domain logon (one for a normal session connection such as when mapping a network drive or printer), this is a performance bottleneck for large sites. What is needed is an indexed approach such as is used in databases.
The second problem is that administrators who desire to replicate a smbpasswd file to more than one Samba server were left to use external tools such as rsync(1) and ssh(1) and wrote custom, in-house scripts.
And finally, the amount of information which is stored in an smbpasswd entry leaves no room for additional attributes such as a home directory, password expiration time, or even a Relative Identifier (RID).
As a result of these deficiencies, a more robust means of storing user attributes used by smbd was developed. The API which defines access to user accounts is commonly referred to as the samdb interface (previously this was called the passdb API, and is still so named in the Samba CVS trees).
Samba-3 provides an enhanced set of passdb backends that overcome the deficiencies of the smbpasswd plain text database. These are tdbsam, ldapsam, and xmlsam. Of these ldapsam will be of most interest to large corporate or enterprise sites.
Samba can store user and machine account data in a "TDB" (Trivial Database). Using this backend doesn't require any additional configuration. This backend is recommended for new installations that do not require LDAP.
As a general guide the Samba-Team does NOT recommend using the tdbsam backend for sites that have 250 or more users. Additionally, tdbsam is not capable of scaling for use in sites that require PDB/BDC implementations that requires replication of the account database. Clearly, for reason of scalability, the use of ldapsam should be encouraged.
There are a few points to stress that the ldapsam does not provide. The LDAP support referred to in the this documentation does not include:
A means of retrieving user account information from an Windows 200x Active Directory server.
A means of replacing /etc/passwd.
The second item can be accomplished by using LDAP NSS and PAM modules. LGPL versions of these libraries can be obtained from PADL Software (http://www.padl.com/). More information about the configuration of these packages may be found at "LDAP, System Administration; Gerald Carter, O'Reilly; Chapter 6: Replacing NIS". Refer to http://safari.oreilly.com/?XmlId=1-56592-491-6 for those who might wish to know more about configuration and administration of an OpenLDAP server.
This section is outdated for Samba-3 schema. Samba-3 introduces a new schema that has not been documented at the time of this publication.
This document describes how to use an LDAP directory for storing Samba user account information traditionally stored in the smbpasswd(5) file. It is assumed that the reader already has a basic understanding of LDAP concepts and has a working directory server already installed. For more information on LDAP architectures and Directories, please refer to the following sites.
OpenLDAP - http://www.openldap.org/
iPlanet Directory Server - http://iplanet.netscape.com/directory
Two additional Samba resources which may prove to be helpful are
The Samba-PDC-LDAP-HOWTO maintained by Ignacio Coupeau.
The NT migration scripts from IDEALX that are geared to manage users and group in such a Samba-LDAP Domain Controller configuration.
The LDAP ldapsam code has been developed and tested using the OpenLDAP 2.0 and 2.1 server and client libraries. The same code should work with Netscape's Directory Server and client SDK. However, there are bound to be compile errors and bugs. These should not be hard to fix. Please submit fixes via Bug reporting facility.
Samba 3.0 includes the necessary schema file for OpenLDAP 2.0 in examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here:
objectclass ( 1.3.6.1.4.1.7165.2.2.3 NAME 'sambaSamAccount' SUP top AUXILIARY
DESC 'Samba Auxiliary Account'
MUST ( uid $ rid )
MAY ( cn $ lmPassword $ ntPassword $ pwdLastSet $ logonTime $
logoffTime $ kickoffTime $ pwdCanChange $ pwdMustChange $ acctFlags $
displayName $ smbHome $ homeDrive $ scriptPath $ profilePath $
description $ userWorkstations $ primaryGroupID $ domain ))
The samba.schema file has been formatted for OpenLDAP 2.0/2.1. The OID's are owned by the Samba Team and as such is legal to be openly published. If you translate the schema to be used with Netscape DS, please submit the modified schema file as a patch to jerry@samba.org.
Just as the smbpasswd file is meant to store information which supplements a user's /etc/passwd entry, so is the sambaSamAccount object meant to supplement the UNIX user account information. A sambaSamAccount is a STRUCTURAL objectclass so it can be stored individually in the directory. However, there are several fields (e.g. uid) which overlap with the posixAccount objectclass outlined in RFC2307. This is by design.
In order to store all user account information (UNIX and Samba) in the directory, it is necessary to use the sambaSamAccount and posixAccount objectclasses in combination. However, smbd will still obtain the user's UNIX account information via the standard C library calls (e.g. getpwnam(), et. al.). This means that the Samba server must also have the LDAP NSS library installed and functioning correctly. This division of information makes it possible to store all Samba account information in LDAP, but still maintain UNIX account information in NIS while the network is transitioning to a full LDAP infrastructure.
To include support for the sambaSamAccount object in an OpenLDAP directory server, first copy the samba.schema file to slapd's configuration directory. The samba.schema file can be found in the directory examples/LDAP in the samba source distribution.
root# cp samba.schema /etc/openldap/schema/
Next, include the samba.schema file in slapd.conf. The sambaSamAccount object contains two attributes which depend upon other schema files. The 'uid' attribute is defined in cosine.schema and the 'displayName' attribute is defined in the inetorgperson.schema file. Both of these must be included before the samba.schema file.
## /etc/openldap/slapd.conf ## schema files (core.schema is required by default) include /etc/openldap/schema/core.schema ## needed for sambaSamAccount include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/samba.schema include /etc/openldap/schema/nis.schema ....
It is recommended that you maintain some indices on some of the most useful attributes, like in the following example, to speed up searches made on sambaSamAccount objectclasses (and possibly posixAccount and posixGroup as well).
# Indices to maintain ## required by OpenLDAP index objectclass eq index cn pres,sub,eq index sn pres,sub,eq ## required to support pdb_getsampwnam index uid pres,sub,eq ## required to support pdb_getsambapwrid() index displayName pres,sub,eq ## uncomment these if you are storing posixAccount and ## posixGroup entries in the directory as well ##index uidNumber eq ##index gidNumber eq ##index memberUid eq index sambaSID eq index sambaPrimaryGroupSID eq index sambaDomainName eq index default sub
Create the new index by executing:
./sbin/slapindex -f slapd.conf
Remember to restart slapd after making these changes:
root# /etc/init.d/slapd restart
Before you can add accounts to the LDAP database you must create the account containers that they will be stored in. The following LDIF file should be modified to match your needs (ie: Your DNS entries, etc.).
# Organization for Samba Base
dn: dc=plainjoe,dc=org
objectclass: dcObject
objectclass: organization
dc: plainjoe
o: Terpstra Org Network
description: The Samba-3 Network LDAP Example
# Organizational Role for Directory Management
dn: cn=Manager,dc=plainjoe,dc=org
objectclass: organizationalRole
cn: Manager
description: Directory Manager
# Setting up container for users
dn: ou=People,dc=plainjoe,dc=org
objectclass: top
objectclass: organizationalUnit
ou: People
# Setting up admin handle for People OU
dn: cn=admin,ou=People,dc=plainjoe,dc=org
cn: admin
objectclass: top
objectclass: organizationalRole
objectclass: simpleSecurityObject
userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
The userPassword shown above should be generated using slappasswd.
The following command will then load the contents of the LDIF file into the LDAP database.
$ slapadd -v -l initldap.dif
Do not forget to secure your LDAP server with an adequate access control list, as well as an admin password.
Before Samba can access the LDAP server you need to store the LDAP admin password into the Samba-3 secrets.tdb database by:
root# smbpasswd -w secret
The following parameters are available in smb.conf only if your version of samba was built with LDAP support. Samba automatically builds with LDAP support if the LDAP libraries are found.
These are described in the smb.conf man page and so will not be repeated here. However, a sample smb.conf file for use with an LDAP directory could appear as
## /usr/local/samba/lib/smb.conf
[global]
security = user
encrypt passwords = yes
netbios name = TASHTEGO
workgroup = NARNIA
# ldap related parameters
# define the DN to use when binding to the directory servers
# The password for this DN is not stored in smb.conf. Rather it
# must be set by using 'smbpasswd -w secretpw' to store the
# passphrase in the secrets.tdb file. If the "ldap admin dn" values
# change, this password will need to be reset.
ldap admin dn = "cn=Samba Manager,ou=people,dc=samba,dc=org"
# Define the SSL option when connecting to the directory
# ('off', 'start tls', or 'on' (default))
ldap ssl = start tls
# syntax: passdb backend = ldapsam:ldap://server-name[:port]
passdb backend = ldapsam:ldap://funball.samba.org, guest
# smbpasswd -x delete the entire dn-entry
ldap delete dn = no
# the machine and user suffix added to the base suffix
# wrote WITHOUT quotes. NULL suffixes by default
ldap user suffix = ou=People
ldap machine suffix = ou=Systems
# Trust unix account information in LDAP
# (see the smb.conf manpage for details)
ldap trust ids = Yes
# specify the base DN to use when searching the directory
ldap suffix = "ou=people,dc=samba,dc=org"
# generally the default ldap search filter is ok
# ldap filter = "(&(uid=%u)(objectclass=sambaSamAccount))"
As users accounts are managed through the sambaSamAccount objectclass, you should modify your existing administration tools to deal with sambaSamAccount attributes.
Machines accounts are managed with the sambaSamAccount objectclass, just like users accounts. However, it's up to you to store those accounts in a different tree of your LDAP namespace: you should use "ou=Groups,dc=plainjoe,dc=org" to store groups and "ou=People,dc=plainjoe,dc=org" to store users. Just configure your NSS and PAM accordingly (usually, in the /etc/ldap.conf configuration file).
In Samba release 3.0, the group management system is based on POSIX groups. This means that Samba makes use of the posixGroup objectclass. For now, there is no NT-like group system management (global and local groups).
There are two important points to remember when discussing the security of sambaSamAccount entries in the directory.
Never retrieve the lmPassword or ntPassword attribute values over an unencrypted LDAP session.
Never allow non-admin users to view the lmPassword or ntPassword attribute values.
These password hashes are clear text equivalents and can be used to impersonate the user without deriving the original clear text strings. For more information on the details of LM/NT password hashes, refer to the Account Information Database section of this chapter.
To remedy the first security issue, the ldap ssl smb.conf parameter defaults to require an encrypted session (ldap ssl = on) using the default port of 636 when contacting the directory server. When using an OpenLDAP server, it is possible to use the use the StartTLS LDAP extended operation in the place of LDAPS. In either case, you are strongly discouraged to disable this security (ldap ssl = off).
Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS extended operation. However, the OpenLDAP library still provides support for the older method of securing communication between clients and servers.
The second security precaution is to prevent non-administrative users from harvesting password hashes from the directory. This can be done using the following ACL in slapd.conf:
## allow the "ldap admin dn" access, but deny everyone else
access to attrs=lmPassword,ntPassword
by dn="cn=Samba Admin,ou=people,dc=plainjoe,dc=org" write
by * none
The sambaSamAccount objectclass is composed of the following attributes:
Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP)
| lmPassword | the LANMAN password 16-byte hash stored as a character representation of a hexadecimal string. |
| ntPassword | the NT password hash 16-byte stored as a character representation of a hexadecimal string. |
| pwdLastSet | The integer time in seconds since 1970 when the lmPassword and ntPassword attributes were last set. |
| acctFlags | string of 11 characters surrounded by square brackets [] representing account flags such as U (user), W(workstation), X(no password expiration), I(Domain trust account), H(Home dir required), S(Server trust account), and D(disabled). |
| logonTime | Integer value currently unused |
| logoffTime | Integer value currently unused |
| kickoffTime | Integer value currently unused |
| pwdCanChange | Integer value currently unused |
| pwdMustChange | Integer value currently unused |
| homeDrive | specifies the drive letter to which to map the UNC path specified by homeDirectory. The drive letter must be specified in the form "X:" where X is the letter of the drive to map. Refer to the "logon drive" parameter in the smb.conf(5) man page for more information. |
| scriptPath | The scriptPath property specifies the path of the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path is relative to the netlogon share. Refer to the "logon script" parameter in the smb.conf(5) man page for more information. |
| profilePath | specifies a path to the user's profile. This value can be a null string, a local absolute path, or a UNC path. Refer to the "logon path" parameter in the smb.conf(5) man page for more information. |
| smbHome | The homeDirectory property specifies the path of the home directory for the user. The string can be null. If homeDrive is set and specifies a drive letter, homeDirectory should be a UNC path. The path must be a network UNC path of the form \\server\share\directory. This value can be a null string. Refer to the logon home parameter in the smb.conf man page for more information. |
| userWorkstation | character string value currently unused. |
| rid | the integer representation of the user's relative identifier (RID). |
| primaryGroupID | the relative identifier (RID) of the primary group of the user. |
| domain | domain the user is part of. |
The majority of these parameters are only used when Samba is acting as a PDC of a domain (refer to the Samba as a primary domain controller chapter for details on how to configure Samba as a Primary Domain Controller). The following four attributes are only stored with the sambaSamAccount entry if the values are non-default values:
| smbHome |
| scriptPath |
| logonPath |
| homeDrive |
These attributes are only stored with the sambaSamAccount entry if the values are non-default values. For example, assume TASHTEGO has now been configured as a PDC and that logon home = \\%L\%u was defined in its smb.conf file. When a user named "becky" logons to the domain, the logon home string is expanded to \\TASHTEGO\becky. If the smbHome attribute exists in the entry "uid=becky,ou=people,dc=samba,dc=org", this value is used. However, if this attribute does not exist, then the value of the logon home parameter is used in its place. Samba will only write the attribute value to the directory entry if the value is something other than the default (e.g. \\MOBY\becky).
The following is a working LDIF with the inclusion of the posixAccount objectclass:
dn: uid=guest2, ou=people,dc=plainjoe,dc=org ntPassword: 878D8014606CDA29677A44EFA1353FC7 pwdMustChange: 2147483647 primaryGroupID: 1201 lmPassword: 552902031BEDE9EFAAD3B435B51404EE pwdLastSet: 1010179124 logonTime: 0 objectClass: sambaSamAccount uid: guest2 kickoffTime: 2147483647 acctFlags: [UX ] logoffTime: 2147483647 rid: 19006 pwdCanChange: 0
The following is an LDIF entry for using both the sambaSamAccount and posixAccount objectclasses:
dn: uid=gcarter, ou=people,dc=plainjoe,dc=org
logonTime: 0
displayName: Gerald Carter
lmPassword: 552902031BEDE9EFAAD3B435B51404EE
primaryGroupID: 1201
objectClass: posixAccount
objectClass: sambaSamAccount
acctFlags: [UX ]
userPassword: {crypt}BpM2ej8Rkzogo
uid: gcarter
uidNumber: 9000
cn: Gerald Carter
loginShell: /bin/bash
logoffTime: 2147483647
gidNumber: 100
kickoffTime: 2147483647
pwdLastSet: 1010179230
rid: 19000
homeDirectory: /home/tashtego/gcarter
pwdCanChange: 0
pwdMustChange: 2147483647
ntPassword: 878D8014606CDA29677A44EFA1353FC7
Since version 3.0 samba can update the non-samba (LDAP) password stored with an account. When using pam_ldap, this allows changing both unix and windows passwords at once.
The ldap passwd sync options can have the following values:
When the user changes his password, update ntPassword, lmPassword and the password fields.
Only update ntPassword and lmPassword.
Only update the LDAP password and let the LDAP server worry about the other fields. This option is only available when the LDAP server supports LDAP_EXOP_X_MODIFY_PASSWD.
More information can be found in the smb.conf manpage.
Every so often someone will come along with a great new idea. Storing of user accounts in an SQL backend is one of them. Those who want to do this are in the best position to know what the specific benefits are to them. This may sound like a cop-out, but in truth we can not attempt to document every nitty little detail why certain things of marginal utility to the bulk of Samba users might make sense to the rest. In any case, the following instructions should help the determined SQL user to implement a working system.
You either can set up your own table and specify the field names to pdb_mysql (see below for the column names) or use the default table. The file examples/pdb/mysql/mysql.dump contains the correct queries to create the required tables. Use the command :
$ mysql -uusername -hhostname -ppassword \ databasename < /path/to/samba/examples/pdb/mysql/mysql.dump
This plugin lacks some good documentation, but here is some short info:
Add a the following to the passdb backend variable in your smb.conf:
passdb backend = [other-plugins] mysql:identifier [other-plugins]
The identifier can be any string you like, as long as it doesn't collide with the identifiers of other plugins or other instances of pdb_mysql. If you specify multiple pdb_mysql.so entries in passdb backend, you also need to use different identifiers!
Additional options can be given through the smb.conf file in the [global] section.
Table 11.2. Basic smb.conf options for MySQL passdb backend
| Field | Contents |
|---|---|
| identifier:mysql host | host name, defaults to 'localhost' |
| identifier:mysql password | |
| identifier:mysql user | defaults to 'samba' |
| identifier:mysql database | defaults to 'samba' |
| identifier:mysql port | defaults to 3306 |
| identifier:table | Name of the table containing users |
Since the password for the MySQL user is stored in the smb.conf file, you should make the the smb.conf file readable only to the user that runs Samba This is considered a security bug and will be fixed soon.
Names of the columns in this table (I've added column types those columns should have first):
Table 11.3. MySQL field names for MySQL passdb backend
| Field | Type | Contents |
|---|---|---|
| identifier:logon time column | int(9) | |
| identifier:logoff time column | int(9) | |
| identifier:kickoff time column | int(9) | |
| identifier:pass last set time column | int(9) | |
| identifier:pass can change time column | int(9) | |
| identifier:pass must change time column | int(9) | |
| identifier:username column | varchar(255) | unix username |
| identifier:domain column | varchar(255) | NT domain user is part of |
| identifier:nt username column | varchar(255) | NT username |
| identifier:fullname column | varchar(255) | Full name of user |
| identifier:home dir column | varchar(255) | Unix homedir path |
| identifier:dir drive column | varchar(2) | Directory drive path (eg: 'H:') |
| identifier:logon script column | varchar(255) | Batch file to run on client side when logging on |
| identifier:profile path column | varchar(255) | Path of profile |
| identifier:acct desc column | varchar(255) | Some ASCII NT user data |
| identifier:workstations column | varchar(255) | Workstations user can logon to (or NULL for all) |
| identifier:unknown string column | varchar(255) | unknown string |
| identifier:munged dial column | varchar(255) | ? |
| identifier:user sid column | varchar(255) | NT user SID |
| identifier:group sid column | varchar(255) | NT group ID |
| identifier:lanman pass column | varchar(255) | encrypted lanman password |
| identifier:nt pass column | varchar(255) | encrypted nt passwd |
| identifier:plain pass column | varchar(255) | plaintext password |
| identifier:acct control column | int(9) | nt user data |
| identifier:unknown 3 column | int(9) | unknown |
| identifier:logon divs column | int(9) | ? |
| identifier:hours len column | int(9) | ? |
| identifier:unknown 5 column | int(9) | unknown |
| identifier:unknown 6 column | int(9) | unknown |
Eventually, you can put a colon (:) after the name of each column, which should specify the column to update when updating the table. You can also specify nothing behind the colon - then the data from the field will not be updated.
I strongly discourage the use of plaintext passwords, however, you can use them:
If you would like to use plaintext passwords, set 'identifier:lanman pass column' and 'identifier:nt pass column' to 'NULL' (without the quotes) and 'identifier:plain pass column' to the name of the column containing the plaintext passwords.
If you use encrypted passwords, set the 'identifier:plain pass column' to 'NULL' (without the quotes). This is the default.
It is possible to have not all data in the database and making some 'constant'.
For example, you can set 'identifier:fullname column' to : CONCAT(First_name,' ',Sur_name)
Or, set 'identifier:workstations column' to : NULL
See the MySQL documentation for more language constructs.
People forget to put their users in their backend and then complain Samba won't authorize them.
A few complaints have been received from users that just moved to Samba-3. The following smb.conf file entries were causing problems, new accounts were being added to the old smbpasswd file, not to the tdbsam passdb.tdb file:
[globals] ... passdb backend = smbpasswd, tdbsam, guest ...
Samba will add new accounts to the first entry in the passdb backend parameter entry. If you want to update to the tdbsam, then change the entry to:
[globals] ... passdb backend = tdbsam, smbpasswd, guest ...