winbindd — Name Service Switch daemon for resolving names from NT servers
winbindd [-F] [-S] [-i] [-Y] [-d <debug level>] [-s <smb config file>] [-n]
This program is part of the Samba(7) suite.
winbindd is a daemon that provides a service for the Name Service Switch capability that is present in most modern C libraries. The Name Service Switch allows user and system information to be obtained from different databases services such as NIS or DNS. The exact behaviour can be configured throught the /etc/nsswitch.conf file. Users and groups are allocated as they are resolved to a range of user and group ids specified by the administrator of the Samba system.
The service provided by winbindd is called `winbind' and can be used to resolve user and group information from a Windows NT server. The service can also provide authentication services via an associated PAM module.
The pam_winbind module in the 2.2.2 release only supports the auth and account module-types. The latter simply performs a getpwnam() to verify that the system can obtain a uid for the user. If the libnss_winbind library has been correctly installed, this should always succeed.
The following nsswitch databases are implemented by the winbindd service:
User information traditionally stored in the hosts(5) file and used by gethostbyname(3) functions. Names are resolved through the WINS server or by broadcast.
User information traditionally stored in the passwd(5) file and used by getpwent(3) functions.
Group information traditionally stored in the group(5) file and used by getgrent(3) functions.
For example, the following simple configuration in the /etc/nsswitch.conf file can be used to initially resolve user and group information from /etc/passwd and /etc/group and then from the Windows NT server.
passwd: files winbind group: files winbind
The following simple configuration in the /etc/nsswitch.conf file can be used to initially resolve hostnames from /etc/hosts and then from the WINS server.
If specified, this parameter causes the main winbindd process to not daemonize, i.e. double-fork and disassociate with the terminal. Child processes are still created as normal to service each connection request, but the main process does not exit. This operation mode is suitable for running winbindd under process supervisors such as supervise and svscan from Daniel J. Bernstein's daemontools package, or the AIX process monitor.
If specified, this parameter causes winbindd to log to standard output rather than a file.
Prints the version number for smbd.
The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See smb.conf for more information. The default configuration file name is determined at compile time.
debuglevel is an integer from 0 to 10. The default value if this parameter is not specified is zero.
The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day to day running - it generates a small amount of information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the log level parameter in the smb.conf file.
File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client.
Print a summary of command line options.
Tells winbindd to not become a daemon and detach from the current terminal. This option is used by developers when interactive debugging of winbindd is required. winbindd also logs to standard output, as if the -S parameter had been given.
Disable caching. This means winbindd will always have to wait for a response from the domain controller before it can respond to a client and this thus makes things slower. The results will however be more accurate, since results from the cache might not be up-to-date. This might also temporarily hang winbindd if the DC doesn't respond.
Single daemon mode. This means winbindd will run as a single process (the mode of operation in Samba 2.2). Winbindd's default behavior is to launch a child process that is responsible for updating expired cache entries.
Users and groups on a Windows NT server are assigned a relative id (rid) which is unique for the domain when the user or group is created. To convert the Windows NT user or group into a unix user or group, a mapping between rids and unix user and group ids is required. This is one of the jobs that winbindd performs.
As winbindd users and groups are resolved from a server, user and group ids are allocated from a specified range. This is done on a first come, first served basis, although all existing users and groups will be mapped as soon as a client performs a user or group enumeration command. The allocated unix ids are stored in a database file under the Samba lock directory and will be remembered.
WARNING: The rid to unix id database is the only location where the user and group mappings are stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd to determine which user and group ids correspond to Windows NT user and group rids.
Configuration of the winbindd daemon is done through configuration parameters in the smb.conf(5) file. All parameters should be specified in the [global] section of smb.conf.
To setup winbindd for user and group lookups plus authentication from a domain controller use something like the following setup. This was tested on a RedHat 6.2 Linux box.
In /etc/nsswitch.conf put the following:
passwd: files winbind group: files winbind
In /etc/pam.d/* replace the auth lines with something like this:
auth required /lib/security/pam_securetty.so auth required /lib/security/pam_nologin.so auth sufficient /lib/security/pam_winbind.so auth required /lib/security/pam_pwdb.so use_first_pass shadow nullok
Note in particular the use of the sufficient keyword and the use_first_pass keyword.
Now replace the account lines with this:
account required /lib/security/pam_winbind.so
The next step is to join the domain. To do that use the net program like this:
net join -S PDC -U Administrator
The username after the -U can be any Domain user that has administrator privileges on the machine. Substitute the name or IP of your PDC for "PDC".
Next copy libnss_winbind.so to /lib and pam_winbind.so to /lib/security. A symbolic link needs to be made from /lib/libnss_winbind.so to /lib/libnss_winbind.so.2. If you are using an older version of glibc then the target of the link should be /lib/libnss_winbind.so.1.
Finally, setup a smb.conf(5) containing directives like the following:
[global]
winbind separator = +
winbind cache time = 10
template shell = /bin/bash
template homedir = /home/%D/%U
idmap uid = 10000-20000
idmap gid = 10000-20000
workgroup = DOMAIN
security = domain
password server = *
Now start winbindd and you should find that your user and group database is expanded to include your NT users and groups, and that you can login to your unix box as a domain user, using the DOMAIN+user syntax for the username. You may wish to use the commands getent passwd and getent group to confirm the correct operation of winbindd.
The following notes are useful when configuring and running winbindd:
nmbd(8) must be running on the local machine for winbindd to work. winbindd queries the list of trusted domains for the Windows NT server on startup and when a SIGHUP is received. Thus, for a running winbindd to become aware of new trust relationships between servers, it must be sent a SIGHUP signal.
PAM is really easy to misconfigure. Make sure you know what you are doing when modifying PAM configuration files. It is possible to set up PAM such that you can no longer log into your system.
If more than one UNIX machine is running winbindd, then in general the user and groups ids allocated by winbindd will not be the same. The user and group ids will only be valid for the local machine.
If the the Windows NT RID to UNIX user and group id mapping file is damaged or destroyed then the mappings will be lost.
The following signals can be used to manipulate the winbindd daemon.
Reload the smb.conf(5) file and apply any parameter changes to the running version of winbindd. This signal also clears any cached user and group information. The list of other domains trusted by winbindd is also reloaded.
The SIGUSR2 signal will cause winbindd to write status information to the winbind log file including information about the number of user and group ids allocated by winbindd.
Log files are stored in the filename specified by the log file parameter.
Name service switch configuration file.
The UNIX pipe over which clients communicate with the winbindd program. For security reasons, the winbind client will only attempt to connect to the winbindd daemon if both the /tmp/.winbindd directory and /tmp/.winbindd/pipe file are owned by root.
The UNIX pipe over which 'privilaged' clients communicate with the winbindd program. For security reasons, access to some winbindd functions - like those needed by the ntlm_auth utility - is restricted. By default, only users in the 'root' group will get this access, however the administrator may change the group permissions on $LOCKDIR/winbindd_privilaged to allow programs like 'squid' to use ntlm_auth. Note that the winbind client will only attempt to connect to the winbindd daemon if both the $LOCKDIR/winbindd_privilaged directory and $LOCKDIR/winbindd_privilaged/pipe file are owned by root.
Implementation of name service switch library.
Storage for the Windows NT rid to UNIX user/group id mapping. The lock directory is specified when Samba is initially compiled using the --with-lockdir option. This directory is by default /usr/local/samba/var/locks .
Storage for cached user and group information.
This man page is correct for version 3.0 of the Samba suite.
nsswitch.conf(5), Samba(7), wbinfo(8), smb.conf(5)
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.
wbinfo and winbindd were written by Tim Potter.
The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.