!== !== DHCP-Server-Configuration.txt for Samba release 2.0.0-alpha6 19 Sep 1998 !== Subject: DHCP Server Configuration for SMB Clients Date: March 1, 1998 Contributor: John H Terpstra Support: This is an unsupported document. Refer to documentation that is supplied with the ISC DHCP Server. Do NOT email the contributor for ANY assistance. =============================================================================== Background: =========== We wish to help those folks who wish to use the ISC DHCP Server and provide sample configuration settings. Red Hat Linux 5.0 is one operating system that comes supplied with the ISC DHCP Server. ISC DHCP is available from ftp://ftp.isc.org/isc/dhcp Incorrect configuration of MS Windows clients (Windows95, Windows NT Server and Workstation) will lead to problems with browsing and with general network operation. Windows 95 users often report problems where the TCP/IP and related network settings will inadvertantly become reset at machine start-up resulting in loss of configuration settings. This results in increased maintenance overheads as well as serious user frustration. In recent times users on one mailing list incorrectly attributed the cause of network operating problems to incorrect configuration of Samba. One user insisted that the only way to provent Windows95 from periodically performing a full system reset and hardware detection process on start-up was to install the NetBEUI protocol in addition to TCP/IP. In the first place, there is NO need for NetBEUI. All Microsoft Windows clients natively run NetBIOS over TCP/IP, and that is the only protocol that is recognised by Samba. Installation of NetBEUI and/or NetBIOS over IPX will cause problems with browse list operation on most networks. Even Windows NT networks experience these problems when incorrectly configured Windows95 systems share the same name space. It is important that only those protocols that are strictly needed for site specific reasons should EVER be installed. Secondly, and totally against common opinion, DHCP is NOT an evil design but is an extension of the BOOTP protocol that has been in use in Unix environments for many years without any of the melt-down problems that some sensationalists would have us believe can be experienced with DHCP. In fact, DHCP in covered by rfc1541 and is a very safe method of keeping an MS Windows desktop environment under control and for ensuring stable network operation. While it is true that the Microsoft DHCP server that comes with Windows NT Server provides only a sub-set of rfc1533 functionality this is hardly an issue in those sites that already have a large investment and commitment to Unix systems and technologies. The current state of the art of the DHCP Server specification in covered in rfc2132. This document aims to provide enough background information so that the majority of site can without too much hardship get the Internet Software Consortium's (ISC) DHCP Server into operation. The key benefits of using DHCP includes: 1) Automated IP Address space management and maximised re-use of available IP Addresses, 2) Automated control of MS Windows client TCP/IP network configuration, 3) Automatic recovery from start-up and run-time problems with Windows95. Client Configuration for SMB Networking: ======================================== SMB network clients need to be configured so that all standard TCP/IP name to address resolution works correctly. Once this has been achieved the SMB environment provides additional tools and services that act as helper agents in the translation of SMB (NetBIOS) names to their appropriate IP Addresses. One such helper agent is the NetBIOS Name Server (NBNS) or as Microsoft called it in their Windows NT Server implementation WINS (Windows Internet Name Server). A client needs to be configured so that it has a unique Machine (Computer) Name. This can NOT be done via DHCP and must be assigned when MS Windows networking is first installed. All remaining TCP/IP networking parameters can be assigned via DHCP. These include: a) IP Address, b) Netmask, c) Gateway (Router) Address, d) DNS Domain Name, e) DNS Server addresses, f) WINS (NBNS) Server addresses, g) IP Forwarding, h) Timezone offset, i) Node Type, Other assignments can be made from a DHCP server too, but the above cover the major needs. DHCP Server Installation: ========================= It is assumed that you will have obtained a copy of the GPL'd ISC DHCP server source files from ftp://ftp.isc.org/isc/dhcp, it is also assumed that you have compiled the sources and have installed the binary files. The following simply serves to provide sample configuration files to enable dhcpd to operate. The sample files assume that your site is configured to use private IP network address space using the Class B range of 172.16.1.0 - 172.16.1.255 and is using a netmask of 255.255.255.0 (ie:24 bits). It is assumed that your router to the outside world is at 172.16.1.254 and that your Internet Domain Name is bestnet.com.au. The IP Address range 172.16.1.100 to 172.16.1.240 has been set aside as your dynamically allocated range. In addition, bestnet.com.au have two print servers that need to obtain settings via BOOTP. The machine linux.bestnet.com.au has IP address 172.16.1.1 and is you primary Samba server with WINS support enabled by adding the parameter to the /etc/smb.conf file: [globals] wins support = yes. The dhcp lease time will be set to 20 hours. Configuration Files: ==================== Before dhcpd will run you need to install a file that speifies the configuration settings, and another that holds the database of issued IP addresses. On many systems these are stored in the /etc directory on the Unix system. Example /etc/dhcpd.conf: ======================== server-identifier linux.bestnet.com.au; subnet 172.16.1.0 netmask 255.255.255.0 { range 172.16.1.100 172.16.1.240; default-lease-time 72000; max-lease-time 144000; option subnet-mask 255.255.255.0; option broadcast-address 172.16.1.255; option routers 172.16.1.254; option domain-name-servers 172.16.1.1, 172.16.1.2; option domain-name "bestnet.com.au"; option time-offset 39600; option ip-forwarding off; option netbios-name-servers 172.16.0.1; option netbios-dd-server 172.16.0.1; option netbios-node-type 8; } group { next-server 172.16.1.10; option subnet-mask 255.255.255.0; option domain-name "bestnet.com.au"; option domain-name-servers 172.16.1.1, 172.16.0.2; option netbios-name-servers 172.16.0.1; option netbios-dd-server 172.16.0.1; option netbios-node-type 8; option routers 172.16.1.240; option time-offset 39600; host lexmark1 { hardware ethernet 06:07:08:09:0a:0b; fixed-address 172.16.1.245; } host epson4 { hardware ethernet 01:02:03:04:05:06; fixed-address 172.16.1.242; } } Creating the /etc/dhcpd.leases file: ==================================== At a Unix shell create an empty dhcpd.leases file in the /etc directory. You can do this by typing: cp /dev/null /etc/dhcpd.leases Setting up a route table for all-ones addresses: ================================================ Quoting from the README file that comes with th eISC DHCPD Server: BROADCAST In order for dhcpd to work correctly with picky DHCP clients (e.g., Windows 95), it must be able to send packets with an IP destination address of 255.255.255.255. Unfortunately, Linux insists on changing 255.255.255.255 into the local subnet broadcast address (here, that's 192.5.5.223). This results in a DHCP protocol violation, and while many DHCP clients don't notice the problem, some (e.g., all Microsoft DHCP clients) do. Clients that have this problem will appear not to see DHCPOFFER messages from the server. It is possible to work around this problem on some versions of Linux by creating a host route from your network interface address to 255.255.255.255. The command you need to use to do this on Linux varies from version to version. The easiest version is: route add -host 255.255.255.255 dev eth0 On some older Linux systems, you will get an error if you try to do this. On those systems, try adding the following entry to your /etc/hosts file: 255.255.255.255 all-ones Then, try: route add -host all-ones dev eth0 For more information please refer to the ISC DHCPD Server documentation.