# Note that this file exists in Mandrake packaging cvs (as samba3.spec) # and samba cvs (as packaging/Mandrake/samba2.spec.tmpl). # Keep in mind that any changes should take both locations into account # Considerable effort has gone into making this possible, so that only # one spec file is maintained, please don't break it. # It should be possible, without any changes to this file, to build # binary packages on most recent Mandrake releases: # 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh' # 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh ' # 3)using official source releases and updated Mandrake packaging, by # 'rpm -ba samba.spec' # As such, any sources or patches used in a build from a samba release or # cvs should be submitted for inclusion in samba cvs. %define pkg_name samba %define ver 3.0.0beta3 %define rel 3mdk %define vscanver 0.3.3beta1 %define libsmbmajor 0 # Version and release replaced by samba-team at release from samba cvs %define pversion PVERSION %define prelease PRELEASE #Check to see if p(version|release) has been replaced (1 if replaced) %define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) %define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) %if %have_pversion %define source_ver %{pversion} %global _unpackaged_files_terminate_build 0 %global _missing_doc_files_terminate_build 0 %else %define source_ver %{ver} %endif # We might have a prerelease: %define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}') %if %have_pre %define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);') %define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g') %endif # Check to see if we are running a build from a tarball release from samba.org # (%have_pversion) If so, disable vscan, unless explicitly requested # (--with vscan). %define build_vscan 1 %if %have_pversion %define build_vscan 0 %{?_with_vscan: %define build_vscan 1} %endif # We now do detection of the Mandrake release we are building on: #%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi) #%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi) %define build_mdk92 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.2 ];then echo 1; else echo 0; fi) %define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi) %define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi) %define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi) %define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi) %define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi) %define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi) %define build_non_default 0 # Default options %define build_system 0 %define build_acl 1 %define build_winbind 1 %define build_wins 1 %define build_ldap 0 %define build_ads 1 %define build_scanners 0 # CUPS supports functionality for 'printcap name = cups' (9.0 and later): %define build_cupspc 0 # releases that have chrpath available in main %define build_chrpath 0 # Set defaults for each version %if %build_mdk92 %define build_cupspc 1 %define build_chrpath 1 %endif %if %build_mdk91 %define build_cupspc 1 %define build_chrpath 1 %endif %if %build_mdk90 %define build_chrpath 1 %endif %if %build_mdk82 %endif %if %build_mdk81 %define build_winbind 0 %define build_wins 0 %endif %if %build_mdk80 %define build_acl 0 %define build_winbind 0 %define build_wins 0 %define build_ads 0 %endif %if %build_mdk72 %define build_acl 0 %define build_winbind 0 %define build_wins 0 %define build_ads 0 %endif # Allow commandline option overrides (borrowed from Vince's qmail srpm): # To use it, do rpm [-ba|--rebuild] --with 'xxx' # Check if the rpm was built with the defaults, otherwise we inform the user %define build_non_default 0 %{?_with_system: %{expand: %%global build_system 1}} %{?_without_system: %{expand: %%global build_system 0}} %{?_with_acl: %{expand: %%global build_acl 1}} %{?_with_acl: %{expand: %%global build_non_default 1}} %{?_without_acl: %{expand: %%global build_acl 0}} %{?_without_acl: %{expand: %%global build_non_default 1}} %{?_with_winbind: %{expand: %%global build_winbind 1}} %{?_with_winbind: %{expand: %%global build_non_default 1}} %{?_without_winbind: %{expand: %%global build_winbind 0}} %{?_without_winbind: %{expand: %%global build_non_default 1}} %{?_with_wins: %{expand: %%global build_wins 1}} %{?_with_wins: %{expand: %%global build_non_default 1}} %{?_without_wins: %{expand: %%global build_wins 0}} %{?_without_wins: %{expand: %%global build_non_default 1}} %{?_with_ldap: %{expand: %%global build_ldap 1}} %{?_with_ldap: %{expand: %%global build_non_default 1}} %{?_without_ldap: %{expand: %%global build_ldap 0}} %{?_without_ldap: %{expand: %%global build_non_default 1}} %{?_with_ads: %{expand: %%global build_ads 1}} %{?_with_ads: %{expand: %%global build_non_default 1}} %{?_without_ads: %{expand: %%global build_ads 0}} %{?_without_ads: %{expand: %%global build_non_default 1}} %{?_with_scanners: %{expand: %%global build_scanners 1}} %{?_with_scanners: %{expand: %%global build_non_default 1}} # As if that weren't enough, we're going to try building with antivirus # support as an option also %define build_fprot 0 %define build_kaspersky 0 %define build_mks 0 %define build_openav 0 %define build_sophos 0 %define build_symantec 0 %define build_trend 0 %if %build_vscan && %build_scanners #These can be enabled here by default # (kaspersky requires their library present) %define build_fprot 1 %define build_mks 1 %define build_openav 1 %define build_sophos 1 %define build_trend 1 %endif %if %build_vscan %{?_with_fprot: %{expand: %%global build_fprot 1}} %{?_with_kaspersky: %{expand: %%global build_kaspersky 1}} %{?_with_mks: %{expand: %%global build_mks 1}} %{?_with_openav: %{expand: %%global build_openav 1}} %{?_with_sophos: %{expand: %%global build_sophos 1}} #%{?_with_symantec: %{expand: %%global build_symantec 1}} %{?_with_trend: %{expand: %%global build_trend 1}} %global vscandir samba-vscan-%{vscanver} %endif %global vfsdir examples.bin/VFS #Standard texts for descriptions: %define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}") %define message_system %(echo -e -n "NOTE: This is a prerelease of samba-%{samba_major}, not intended for production\\n use. Rather these packages are provided, parallel installable\\nwith samba-2.2.x, for testing purposes") #check gcc version to disable some optimisations on gcc-3.3.1 %define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}') %ifarch alpha %define build_expsam xml %else %define build_expsam mysql,xml %endif #Workaround missing macros in 8.x: %{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}} # Determine whether this is the system samba or not. %if %build_system %define samba_major %{nil} %else %define samba_major 3 %endif Summary: Samba SMB server. Name: %{pkg_name}%{samba_major} %if %have_pre Version: %{pre_ver} %else Version: %{source_ver} %endif %if %have_prelease && !%have_pre Release: 1.%{prelease}mdk %endif %if %have_prelease && %have_pre Release: 0.%{pre_pre}.%{prelease}mdk %endif %if !%have_prelease && !%have_pre Release: %{rel} %endif %if !%have_prelease && %have_pre Release: 0.%{pre_pre}.%{rel} %endif License: GPL Group: System/Servers Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2 URL: http://www.samba.org Source1: samba.log Source3: samba.xinetd Source4: swat_48.png.bz2 Source5: swat_32.png.bz2 Source6: swat_16.png.bz2 Source7: README.%{name}-mandrake-rpm %if %build_vscan Source8: samba-vscan-%{vscanver}.tar.bz2 %endif Source10: samba-print-pdf.sh.bz2 Source11: mount.cifs.8.bz2 Patch1: smbw.patch.bz2 Patch3: samba-2.2.0-buildroot.patch.bz2 Patch4: samba-3.0-smbmount-sbin.patch.bz2 %if !%have_pversion # Version specific patches: current version %else # Version specific patches: upcoming version %endif # Limbo patches (applied to prereleases, but not preleases, ie destined for # samba CVS) %if %have_pversion && %have_pre %endif Requires: pam >= 0.64, samba-common = %{version} BuildRequires: pam-devel readline-devel libncurses-devel popt-devel BuildRequires: libxml2-devel %ifnarch alpha BuildRequires: mysql-devel %endif %if %build_acl BuildRequires: libacl-devel %endif %if %build_mdk72 BuildRequires: cups-devel %else BuildRequires: libcups-devel %endif BuildRequires: libldap-devel %if %build_ads BuildRequires: libldap-devel krb5-devel %endif %if %build_chrpath BuildRequires: chrpath %endif BuildRoot: %{_tmppath}/%{name}-root Prefix: /usr Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall Prereq: fileutils sed /bin/grep %description Samba provides an SMB server which can be used to provide network services to SMB (sometimes called "Lan Manager") clients, including various versions of MS Windows, OS/2, and other Linux machines. Samba also provides some SMB clients, which complement the built-in SMB filesystem in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) protocol. Samba-3.0 features working NT Domain Control capability and includes the SWAT (Samba Web Administration Tool) that allows samba's smb.conf file to be remotely managed using your favourite web browser. For the time being this is being enabled on TCP port 901 via xinetd. SWAT is now included in it's own subpackage, samba-swat. Please refer to the WHATSNEW.txt document for fixup information. This binary release includes encrypted password support. Please read the smb.conf file and ENCRYPTION.txt in the docs directory for implementation details. %if %have_pversion %message_bugzilla samba3 %endif %if !%build_system %message_system %endif %if %build_non_default WARNING: This RPM was built with command-line options. Please see README.%{name}-mandrake-rpm in the documentation for more information. %endif %package server URL: http://www.samba.org Summary: Samba (SMB) server programs. Requires: %{name}-common = %{version} PreReq: rpm-helper Group: Networking/Other %if %build_system Provides: samba Obsoletes: samba Provides: samba-server-ldap Obsoletes: samba-server-ldap Provides: samba3-server Obsoletes: samba3-server %else #Provides: samba-server %endif %description server Samba-server provides a SMB server which can be used to provide network services to SMB (sometimes called "Lan Manager") clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) protocol. Samba-3.0 features working NT Domain Control capability and includes the SWAT (Samba Web Administration Tool) that allows samba's smb.conf file to be remotely managed using your favourite web browser. For the time being this is being enabled on TCP port 901 via xinetd. SWAT is now included in it's own subpackage, samba-swat. Please refer to the WHATSNEW.txt document for fixup information. This binary release includes encrypted password support. Please read the smb.conf file and ENCRYPTION.txt in the docs directory for implementation details. %if %have_pversion %message_bugzilla samba3-server %endif %if !%build_system %message_system %endif %package client URL: http://www.samba.org Summary: Samba (SMB) client programs. Group: Networking/Other Requires: %{name}-common = %{version} %if %build_system Provides: samba3-client Obsoletes: samba3-client Obsoletes: smbfs %else #Provides: samba-client %endif %description client Samba-client provides some SMB clients, which complement the built-in SMB filesystem in Linux. These allow the accessing of SMB shares, and printing to SMB printers. %if %have_pversion %message_bugzilla samba3-client %endif %if !%build_system %message_system %endif %package common URL: http://www.samba.org Summary: Files used by both Samba servers and clients. Group: System/Servers %if %build_system Provides: samba-common-ldap Obsoletes: samba-common-ldap Provides: samba3-common Obsoletes: samba3-common %else #Provides: samba-common %endif %description common Samba-common provides files necessary for both the server and client packages of Samba. %if %have_pversion %message_bugzilla samba3-common %endif %if !%build_system %message_system %endif %package doc URL: http://www.samba.org Summary: Documentation for Samba servers and clients. Group: System/Servers Requires: %{name}-common = %{version} %if %build_system Obsoletes: samba3-doc Provides: samba3-doc %else #Provides: samba-doc %endif %description doc Samba-doc provides documentation files for both the server and client packages of Samba. %if %have_pversion %message_bugzilla samba3-doc %endif %if !%build_system %message_system %endif %package swat URL: http://www.samba.org Summary: The Samba Web Administration Tool. Requires: %{name}-server = %{version} Requires: xinetd Group: System/Servers %if %build_system Provides: samba-swat-ldap Obsoletes: samba-swat-ldap Provides: samba3-swat Obsoletes: samba3-swat %else #Provides: samba-swat %endif %description swat SWAT (the Samba Web Administration Tool) allows samba's smb.conf file to be remotely managed using your favourite web browser. For the time being this is being enabled on TCP port 901 via xinetd. Note that SWAT does not use SSL encryption, nor does it preserve comments in your smb.conf file. Webmin uses SSL encryption by default, and preserves comments in configuration files, even if it does not display them, and is therefore the preferred method for remotely managing Samba. %if %have_pversion %message_bugzilla samba3-swat %endif %if !%build_system %message_system %endif %if %build_winbind %package winbind URL: http://www.samba.org Summary: Samba-winbind daemon, utilities and documentation Group: System/Servers Requires: %{name}-common = %{version} %description winbind Provides the winbind daemon and testing tools to allow authentication and group/user enumeration from a Windows or Samba domain controller. %endif %if %have_pversion %message_bugzilla samba3-winbind %endif %if !%build_system %message_system %endif %if %build_wins %package -n nss_wins%{samba_major} URL: http://www.samba.org Summary: Name Service Switch service for WINS Group: System/Servers Requires: %{name}-common = %{version} PreReq: glibc %description -n nss_wins%{samba_major} Provides the libnss_wins shared library which resolves NetBIOS names to IP addresses. %endif %if %have_pversion %message_bugzilla nss_wins3 %endif %if !%build_system %message_system %endif %if %{?_without_test:0}%{!?_without_test:1} %package test URL: http://www.samba.org Summary: Debugging and benchmarking tools for samba Group: System/Servers Requires: %{name}-common = %{version} %endif %if %build_system && %{?_without_test:0}%{!?_without_test:1} Provides: samba3-test samba3-debug Obsoletes: samba3-test samba3-debug %else Provides: samba-test samba3-debug Obsoletes: samba3-debug %endif %if %{?_without_test:0}%{!?_without_test:1} %description test This package provides tools for benchmarking samba, and debugging the correct operation of tools against smb servers. %endif %if %build_system %package -n libsmbclient%{libsmbmajor} URL: http://www.samba.org Summary: SMB Client Library Group: System/Libraries Provides: libsmbclient %description -n libsmbclient%{libsmbmajor} This package contains the SMB client library, part of the samba suite of networking software, allowing other software to access SMB shares. %endif %if %have_pversion && %build_system %message_bugzilla libsmbclient%{libsmbmajor} %endif %if %build_system %package -n libsmbclient%{libsmbmajor}-devel URL: http://www.samba.org Summary: SMB Client Library Development files Group: System/Libraries Provides: libsmbclient-devel %description -n libsmbclient%{libsmbmajor}-devel This package contains the development files for the SMB client library, part of the samba suite of networking software, allowing the development of other software to access SMB shares. %endif %if %have_pversion && %build_system %message_bugzilla libsmbclient%{libsmbmajor}-devel %endif %if %build_system %package -n libsmbclient%{libsmbmajor}-static-devel URL: http://www.samba.org Summary: SMB Client Static Library Development files Group: System/Libraries Provides: libsmbclient-static-devel = %{version}-%{release} Requires: libsmbclient%{libsmbmajor}-devel = %{version}-%{release} %description -n libsmbclient%{libsmbmajor}-static-devel This package contains the static development files for the SMB client library, part of the samba suite of networking software, allowing the development of other software to access SMB shares. %endif %if %have_pversion && %build_system %message_bugzilla libsmbclient%{libsmbmajor}-devel %endif #%package passdb-ldap #URL: http://www.samba.org #Summary: Samba password database plugin for MySQL #Group: System/Libraries # #%description passdb-ldap #The passdb-ldap package for samba provides a password database #backend allowing samba to store account details in an LDAP #database #_if %have_pversion #_message_bugzilla samba3-passdb-ldap #_endif #_if !%build_system #_message_system #_endif %ifnarch alpha %package passdb-mysql URL: http://www.samba.org Summary: Samba password database plugin for MySQL Group: System/Libraries %description passdb-mysql The passdb-mysql package for samba provides a password database backend allowing samba to store account details in a MySQL database %endif %ifnarch alpha && %have_pversion %message_bugzilla samba3-passdb-mysql %endif %ifnarch alpha && !%build_system %message_system %endif %package passdb-xml URL: http://www.samba.org Summary: Samba password database plugin for XML files Group: System/Libraries %description passdb-xml The passdb-xml package for samba provides a password database backend allowing samba to store account details in XML files. %if %have_pversion %message_bugzilla samba3-passdb-xml %endif %if !%build_system %message_system %endif #Antivirus packages: %if %build_fprot %package vscan-fprot Summary: On-access virus scanning for samba using FPROT Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-fprot A vfs-module for samba to implement on-access scanning using the FPROT antivirus software (which must be installed to use this). %endif %if %build_kaspersky %package vscan-kaspersky Summary: On-access virus scanning for samba using Kaspersky Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-kaspersky A vfs-module for samba to implement on-access scanning using the Kaspersky antivirus software (which must be installed to use this). %endif %if %build_mks %package vscan-mks Summary: On-access virus scanning for samba using MKS Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-mks A vfs-module for samba to implement on-access scanning using the MKS antivirus software (which must be installed to use this). %endif %if %build_openav %package vscan-openav Summary: On-access virus scanning for samba using OpenAntivirus Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-openav A vfs-module for samba to implement on-access scanning using the OpenAntivirus antivirus software (which must be installed to use this). %endif %if %build_sophos %package vscan-sophos Summary: On-access virus scanning for samba using Sophos Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-sophos A vfs-module for samba to implement on-access scanning using the Sophos antivirus software (which must be installed to use this). %endif %if %build_symantec %package vscan-symantec Summary: On-access virus scanning for samba using Symantec Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-symantec A vfs-module for samba to implement on-access scanning using the Symantec antivirus software (which must be installed to use this). %endif %if %build_trend %package vscan-trend Summary: On-access virus scanning for samba using Trend Group: System/Servers Requires: %{name}-server = %{version} Provides: %{name}-vscan Autoreq: 0 %description vscan-trend A vfs-module for samba to implement on-access scanning using the Trend antivirus software (which must be installed to use this). %endif %prep # Allow users to query build options with --with options: #%define opt_status(%1) %(echo %{1}) %if %{?_with_options:1}%{!?_with_options:0} %define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi) #exit 1 %{error: } %{error:Build options available are:} %{error:--with[out] system Build as the system samba package [or as samba3]} %{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl} %{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind} %{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins} %{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap} %{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads} %{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners} %{error: } %else %{error: } %{error: This rpm has build options available, use --with options to see them} %{error: } %endif %if %{?_with_options:1}%{!?_with_options:0} && %build_scanners %{error:--with scanners enables fprot,mks,openav,sophos and trend by default} %{error: } %{error:To enable others (requires development libraries for the scanner):} %{error:--with kaspersky Enable on-access scanning with Kaspersky - %opt_status %build_kaspersky} %{error: } %endif %if %{?_with_options:1}%{!?_with_options:0} clear exit 1 %endif %if %build_non_default RPM_EXTRA_OPTIONS="\ %{?_with_system: --with system}\ %{?_without_system: --without system}\ %{?_with_acl: --with acl}\ %{?_without_acl: --without acl}\ %{?_with_winbind: --with winbind}\ %{?_without_winbind: --without winbind}\ %{?_with_wins: --with wins}\ %{?_without_wins: --without wins}\ %{?_with_ldap: --with ldap}\ %{?_without_ldap: --without ldap}\ %{?_with_ads: --with ads}\ %{?_without_ads: --without ads}\ %{?_with_scanners: --with scanners}\ %{?_without_scanners: --without scanners}\ " echo "Building a non-default rpm with the following command-line arguments:" echo "$RPM_EXTRA_OPTIONS" echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7} echo "an identical rpm, you need to supply the following options">>%{SOURCE7} echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7} echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} %else echo "This rpm was built with default options">%{SOURCE7} echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} %endif %if %build_vscan %setup -q -a 8 -n %{pkg_name}-%{source_ver} %else %setup -q -n %{pkg_name}-%{source_ver} %endif #%patch111 -p1 %patch1 -p1 -b .smbw %patch3 -p1 -b .buildroot %patch4 -p1 -b .sbin # Version specific patches: current version %if !%have_pversion echo "Applying patches for current version: %{ver}" %else # Version specific patches: upcoming version echo "Applying patches for new versions: %{pversion}" %endif # Limbo patches %if %have_pversion && %have_pre echo "Appling patches which should only be applied to prereleases" %endif # Fix quota compilation in glibc>2.3 %if %build_mdk91 || %build_mdk92 #grep "" source/smbd/quotas.c >/dev/null && \ perl -pi -e 's@@@' source/smbd/quotas.c %endif cp %{SOURCE7} . # Make a copy of examples so that we have a clean one for doc: cp -a examples examples.bin %if %build_vscan cp -a %{vscandir} %{vfsdir} #fix stupid directory names: mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav %endif # Inline replacement of config dir for av in fprot kaspersky mks oav sophos trend; do [ -e %{vfsdir}/%{vscandir}/$av/vscan-$av.h ] && perl -pi -e \ 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \ %{vfsdir}/%{vscandir}/$av/vscan-$av.h done #Inline edit vscan header: perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g' %{vfsdir}/%{vscandir}/include/vscan-global.h # Edit some files when not building system samba: %if !%build_system perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c %endif #remove cvs internal files from docs: find docs examples -name '.cvsignore' -exec rm -f {} \; %build #%serverbuild (cd source CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'` %if %gcc331 #CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-Os/g'` %endif # Don't use --with-fhs now, since it overrides libdir, it sets configdir, # lockdir,piddir logfilebase,privatedir and swatdir %configure --prefix=%{_prefix} \ --sysconfdir=%{_sysconfdir}/%{name} \ --localstatedir=/var \ --libdir=%{_libdir}/%{name} \ --with-privatedir=%{_sysconfdir}/%{name} \ --with-lockdir=/var/cache/%{name} \ --with-piddir=/var/run/%{name} \ --with-swatdir=%{_datadir}/swat%{samba_major} \ --with-configdir=%{_sysconfdir}/%{name} \ --with-logfilebase=/var/log/%{name} \ %if !%build_ads --with-ads=no \ %endif --with-automount \ --with-smbmount \ --with-pam \ --with-pam_smbpass \ %if %build_ldap --with-ldapsam \ %endif --with-tdbsam \ --with-syslog \ --with-quotas \ --with-utmp \ --with-manpages-langs=en \ %if %build_acl --with-acl-support \ %endif --disable-mysqltest \ --with-expsam=%build_expsam \ --program-suffix=%{samba_major} # --with-shared-modules=pdb_ldap,idmap_ldap \ # --with-manpages-langs=en,ja,pl \ #_if !%build_system # --with-smbwrapper \ #_endif # --with-nisplussam \ # --with-fhs \ #Fix the make file so we don't create debug information on 9.2 %if %build_mdk92 perl -pi -e 's/-g //g' Makefile %endif make proto_exists %make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg client/mount.cifs # Build VFS modules (experimental) #cd ../%vfsdir #_configure --prefix=%{prefix} \ # --mandir=%{prefix}/share/man #make #make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \ # -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" ) # Build mkntpasswd in examples/LDAP/ for smbldaptools #( #cd examples.bin/LDAP/smbldap-tools/mkntpwd #make #) # Build antivirus vfs objects: %if %build_fprot echo -e "\n\nBuild antivirus VFS modules\n\n" echo "Building fprot" (cd %{vfsdir}/%{vscandir}/fprot;make) %endif %if %build_kaspersky echo "Building Kaspersky" (cd %{vfsdir}/%{vscandir}/kavp perl -p -i -e "s|/usr/local/|/usr/|g" Makefile.KAV4 make -f Makefile.KAV4 ) %endif %if %build_mks echo "Building mks" (cd %{vfsdir}/%{vscandir}/mks;make) %endif %if %build_openav echo "Building OpenAntivirus" (cd %{vfsdir}/%{vscandir}/oav;make) %endif %if %build_sophos echo "building sophos" (cd %{vfsdir}/%{vscandir}/sophos;make) %endif %if %build_symantec echo "Building symantec" (cd %{vfsdir}/%{vscandir}/symantec;make) %endif %if %build_trend echo "Building Trend" (cd %{vfsdir}/%{vscandir}/trend;make) %endif %install rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT #Ensure all docs are readable chmod a+r docs -R # Any entries here mean samba makefile is *really* broken: mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name} mkdir -p $RPM_BUILD_ROOT/%{_datadir} mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs (cd source make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} install installclientlib installmodules) install -m755 source/bin/editreg %{buildroot}/%{_bindir} #need to stay mkdir -p $RPM_BUILD_ROOT/sbin mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d} mkdir -p $RPM_BUILD_ROOT/%{_initrddir} mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} mkdir -p $RPM_BUILD_ROOT/var/log/%{name} mkdir -p $RPM_BUILD_ROOT/var/run/%{name} mkdir -p $RPM_BUILD_ROOT/var/spool/%{name} mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers} mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC} mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src mkdir -p $RPM_BUILD_ROOT/%{_lib}/security mkdir -p $RPM_BUILD_ROOT%{_libdir} mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts #smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build #install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind%{samba_major}.so install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a # smbsh forgotten #install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/ # Install VFS modules #install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs #for i in block recycle #do # install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs #done # Antivirus support: # mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan for av in fprot kavp mks oav sophos symantec trend; do if [ -d %{vfsdir}/%{vscandir}/$av -a -e %{vfsdir}/%{vscandir}/$av/vscan-$av*.so ];then cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.so \ $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs/ cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.conf \ $RPM_BUILD_ROOT%{_sysconfdir}/%{name} fi done #libnss_* not handled by make: # Install the nsswitch library extension file for i in wins winbind; do install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}%{samba_major}.so done # Make link for wins and winbind resolvers ( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2) %if %{?_without_test:0}%{!?_without_test:1} for i in smbtorture msgtest masktest locktest locktest2 nsstest vfstest debug2html;do install -m755 source/bin/$i $RPM_BUILD_ROOT/%{_bindir} done %endif # Install other stuff # install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/ install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major} install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind%{samba_major} # install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major} install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major} install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name} install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major} # install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name} # install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include # Install smbldap-tools scripts: #for i in examples/LDAP/smbldap-tools/*.pl; do # install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ #done #install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ # The conf file #install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name} # Link both smbldap*.pm into vendor-perl (any better ideas?) #mkdir -p %{buildroot}/%{perl_vendorlib} #ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib} #ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib} #mkntpwd #install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir} # Samba smbpasswd migration script: install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ # make a conf file for winbind from the default one: cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf # Some inline fixes for smb.conf for non-winbind use install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf cat packaging/Mandrake/smb.conf | \ sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf %if %build_cupspc perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf %endif # Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs #I don't think it's possible for make to do this ... (cd $RPM_BUILD_ROOT/sbin ln -s ..%{_bindir}/smbmount%{samba_major} mount.smb%{samba_major} ln -s ..%{_bindir}/smbmount%{samba_major} mount.smbfs%{samba_major} ) #install mount.cifs install -m755 source/client/mount.cifs %{buildroot}/sbin bzcat %{SOURCE11} > %{buildroot}/%{_mandir}/man8/mount.cifs.8 echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts # Link smbspool to CUPS (does not require installed CUPS) mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major} # xinetd support mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} # menu support mkdir -p $RPM_BUILD_ROOT%{_menudir} cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF ?package(%{name}-swat):\ command="gnome-moz-remote http://localhost:901/" \ needs="gnome" \ icon="swat%{samba_major}.png" \ section="Configuration/Networking" \ title="Samba Configuration (SWAT)" \ longtitle="The Swat Samba Administration Tool" ?package(%{name}-swat):\ command="sh -c '\$BROWSER http://localhost:901/'" \ needs="x11" \ icon="swat%{samba_major}.png" \ section="Configuration/Networking" \ title="Samba Configuration (SWAT)" \ longtitle="The Swat Samba Administration Tool" EOF mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir} bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf %if %build_chrpath find %{buildroot}/%{_lib} %{buildroot}/%{_bindir} %{buildroot}/%{_sbindir} %{buildroot}/%{_libdir} -type f -exec chrpath -d {} \; %endif # Fix configs when not building system samba: %if !%build_system # Work around non-existent but claimed --program-suffix support :-( for dir in %{_sbindir} %{_bindir};do FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$` for OLD in $FILES; do NEW=`echo ${OLD}%{samba_major}` mv $OLD $NEW done done # And the man pages too: FILES=`find %{buildroot}%{_mandir} -type f ` for OLD in $FILES; do BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'` EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` NEW=`echo ${BASE}%{samba_major}${EXT}` mv $OLD $NEW done # Replace paths in config files and init scripts: for i in smb winbind;do perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major} done for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i; done # Fix pam files perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major} # Fix xinetd file for swat: perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} %endif #Clean up unpackaged files: for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do rm -f %{buildroot}/$i done %clean rm -rf $RPM_BUILD_ROOT %post server %_post_service smb%{samba_major} #%_post_service wrepld%{samba_major} # Add a unix group for samba machine accounts groupadd -frg 421 machines # Migrate tdb's from /var/lock/samba (taken from official samba spec file): for i in /var/lock/samba/*.tdb do if [ -f $i ]; then newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'` echo "Moving $i to $newname" mv $i $newname fi done # Remove the transient tdb files (modified from version in off. samba spec: for TDB in brlock unexpected locking messages; do if [ -e /var/cache/%{name}/$TDB.tdb ]; then rm -f /var/cache/%{name}/$TDB.tdb; fi; done if [ -d /var/lock/samba ]; then rm -rf /var/lock/samba fi %post common # Basic migration script for pre-2.2.1 users, # since smb config moved from /etc to %{_sysconfdir}/samba # Let's create a proper %{_sysconfdir}/samba/smbpasswd file [ -f %{_sysconfdir}/%{name}/smbpasswd ] || { echo "Creating password file for samba..." touch %{_sysconfdir}/%{name}/smbpasswd } # And this too, in case we don't have smbd to create it for us [ -f /var/cache/%{name}/unexpected.tdb ] || { touch /var/cache/%{name}/unexpected.tdb } # Let's define the proper paths for config files perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf # Let's replace lpstat with cups in older smb.conf: %if %build_cupspc echo "Updating samba printing configuration if necessary..." perl -pi -e 's/= lpstat/= cups/' %{_sysconfdir}/%{name}/smb.conf %endif # Fix the logrotate.d file from smb and nmb to smbd and nmbd if [ -f %{_sysconfdir}/logrotate.d/samba ]; then perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba fi # And not loose our machine account SID [ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||: %if %build_winbind %post winbind if [ $1 = 1 ]; then /sbin/chkconfig winbind%{samba_major} on cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp for i in passwd group;do grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null if [ $? = 0 ];then echo "Adding a winbind%{samba_major} entry to the $i section of %{_sysconfdir}/nsswitch.conf" awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf; cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp else echo "$i entry found in %{_sysconfdir}/nsswitch.conf" fi done if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi fi %preun winbind if [ $1 = 0 ]; then echo "Removing winbind%{samba_major} entries from %{_sysconfdir}/nsswitch.conf" perl -pi -e 's/ winbind%{samba_major}//' %{_sysconfdir}/nsswitch.conf /sbin/chkconfig winbind%{samba_major} reset fi %endif %build_winbind %if %build_wins %post -n nss_wins%{samba_major} if [ $1 = 1 ]; then cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null if [ $? = 0 ];then echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf" awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf; else echo "wins entry found in %{_sysconfdir}/nsswitch.conf" fi # else # echo "Upgrade, leaving nsswitch.conf intact" fi %preun -n nss_wins%{samba_major} if [ $1 = 0 ]; then echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf" perl -pi -e 's/ wins%{samba_major}//' %{_sysconfdir}/nsswitch.conf #else # echo "Leaving %{_sysconfdir}/nsswitch.conf intact" fi %endif %build_wins %preun server %_preun_service smb%{samba_major} #%_preun_service wrepld%{samba_major} if [ $1 = 0 ] ; then # /sbin/chkconfig --level 35 smb reset # Let's not loose /var/cache/samba # for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \ #locking.tdb messages.tdb;do # if [ -e /var/cache/samba/$i ]; then # mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK # fi; # done if [ -d /var/log/%{name} ]; then rm -rf /var/log/%{name}/* fi if [ -d /var/cache/%{name} ]; then mv -f /var/cache/%{name} /var/cache/%{name}.BAK fi fi %post swat if [ -f /var/lock/subsys/xinetd ]; then service xinetd reload >/dev/null 2>&1 || : fi %update_menus %postun swat # Remove swat entry from xinetd if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major} service xinetd reload &>/dev/null || : fi if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi %clean_menus %triggerpostun -- samba < 1.9.18p7 if [ $1 != 0 ]; then /sbin/chkconfig --level 35 smb on fi %triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0 if [ $1 != 0 ]; then [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||: [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||: [ -f %{_sysconfdir}/inetd.conf ] && chmod 644 %{_sysconfdir}/services %{_sysconfdir}/inetd.conf ||: fi %files server %defattr(-,root,root) #%attr(-,root,root) /sbin/* %{_sbindir}/%{name} %{_sbindir}/smbd%{samba_major} %{_sbindir}/nmbd%{samba_major} #%{_sbindir}/wrepld%{samba_major} %{_bindir}/smbcontrol%{samba_major} #%{_sbindir}/mkntpwd %{_bindir}/smbstatus%{samba_major} %{_bindir}/pdbedit%{samba_major} %{_bindir}/tdbbackup%{samba_major} %{_bindir}/profiles%{samba_major} %{_bindir}/editreg%{samba_major} %attr(755,root,root) /%{_lib}/security/pam_smbpass* %dir %{_libdir}/%{name}/vfs %{_libdir}/%{name}/vfs/*.so %dir %{_libdir}/%{name}/pdb %attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers %attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major} #%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major} %attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name} %attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name} #%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include %{_mandir}/man1/smbstatus*.1* %{_mandir}/man5/smbpasswd*.5* %{_mandir}/man7/samba*.7* %{_mandir}/man8/smbd*.8* %{_mandir}/man8/nmbd*.8* %{_mandir}/man8/pdbedit*.8* %{_mandir}/man1/smbcontrol*.1* %{_mandir}/man8/tdbbackup*.8* %{_mandir}/man1/profiles*.1* %{_mandir}/man1/editreg*.1* %attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon %attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles %attr(755,root,root) %dir %{_localstatedir}/%{name}/printers %attr(775,root,adm) %dir %{_localstatedir}/%{name}/printers/* %attr(1777,root,root) %dir /var/spool/%{name} %dir %{_datadir}/%{name} %dir %{_datadir}/%{name}/scripts %attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf #%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl #%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm #%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm #%{perl_vendorlib}/*.pm %attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl %attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount %files doc %defattr(-,root,root) %doc README COPYING Manifest Read-Manifest-Now %doc WHATSNEW.txt Roadmap %doc README.%{name}-mandrake-rpm %doc docs %doc examples %attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/ %files swat %defattr(-,root,root) %config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major} #%attr(-,root,root) /sbin/* %{_sbindir}/swat%{samba_major} %{_menudir}/%{name}-swat %{_miconsdir}/*.png %{_liconsdir}/*.png %{_iconsdir}/*.png %attr(-,root,root) %{_datadir}/swat%{samba_major}/help/ %attr(-,root,root) %{_datadir}/swat%{samba_major}/images/ %attr(-,root,root) %{_datadir}/swat%{samba_major}/include/ %lang(ja) %{_datadir}/swat%{samba_major}/lang/ja %lang(tr) %{_datadir}/swat%{samba_major}/lang/tr %{_mandir}/man8/swat*.8* %doc swat/README %files client %defattr(-,root,root) %ifnarch alpha /sbin/mount.smb%{samba_major} /sbin/mount.smbfs%{samba_major} /sbin/mount.cifs %attr(755,root,root) %{_bindir}/smbmount%{samba_major} %attr(4755,root,root) %{_bindir}/smbumount%{samba_major} %attr(4755,root,root) %{_bindir}/smbmnt%{samba_major} %{_mandir}/man8/smbmnt*.8* %{_mandir}/man8/smbmount*.8* %{_mandir}/man8/smbumount*.8* %{_mandir}/man8/mount.cifs*.8* %else %exclude %{_bindir}/smb*m*nt%{samba_major} %exclude %{_mandir}/man8/smb*m*nt*.8* %endif %{_bindir}/nmblookup%{samba_major} %{_bindir}/findsmb%{samba_major} %{_bindir}/smbclient%{samba_major} %{_bindir}/smbprint%{samba_major} %{_bindir}/smbtar%{samba_major} %{_bindir}/smbspool%{samba_major} # Link of smbspool to CUPS /%{_libdir}/cups/backend/smb%{samba_major} /%{_mandir}/man1/nmblookup*.1* /%{_mandir}/man1/findsmb*.1* /%{_mandir}/man1/smbclient*.1* /%{_mandir}/man1/smbtar*.1* /%{_mandir}/man8/smbspool*.8* %files common %defattr(-,root,root) %dir /var/cache/%{name} %dir /var/log/%{name} %dir /var/run/%{name} #%{_bindir}/make_smbcodepage #%{_bindir}/make_unicodemap %{_bindir}/testparm%{samba_major} %{_bindir}/testprns%{samba_major} #%{_bindir}/make_printerdef %{_bindir}/rpcclient%{samba_major} #%{_bindir}/smbsh%{samba_major} %{_bindir}/smbpasswd%{samba_major} %{_bindir}/smbcacls%{samba_major} %{_bindir}/smbcquotas%{samba_major} %{_bindir}/net%{samba_major} %{_bindir}/smbtree%{samba_major} %{_bindir}/ntlm_auth%{samba_major} #%{_libdir}/smbwrapper%{samba_major}.so %dir %{_libdir}/%{name} %{_libdir}/%{name}/*.dat #%{_libdir}/%{name}/lowcase.dat #%{_libdir}/%{name}/valid.dat %dir %{_sysconfdir}/%{name} %attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf %attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf %attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts %dir %{_localstatedir}/%{name} %attr(-,root,root) %{_localstatedir}/%{name}/codepages #%{_mandir}/man1/make_smbcodepage*.1* #%{_mandir}/man1/make_unicodemap*.1* %{_mandir}/man1/testparm*.1* %{_mandir}/man1/rpcclient*.1* %{_mandir}/man1/testprns*.1* %{_mandir}/man5/smb.conf*.5* %{_mandir}/man5/lmhosts*.5* %{_mandir}/man8/smbpasswd*.8* %{_mandir}/man1/smbcacls*.1* %{_mandir}/man1/smbcquotas*.1* %{_mandir}/man8/net*.8* %{_mandir}/man1/smbtree*.1* %{_mandir}/man1/ntlm_auth*.1* %{_mandir}/man7/Samba*.7* %dir %{_datadir}/swat%{samba_major} %if %build_winbind %files winbind %defattr(-,root,root) %{_sbindir}/winbindd%{samba_major} %{_sbindir}/winbind%{samba_major} %{_bindir}/wbinfo%{samba_major} %attr(755,root,root) /%{_lib}/security/pam_winbind* %attr(755,root,root) /%{_lib}/libnss_winbind%{samba_major}* %attr(-,root,root) %config(noreplace) %{_initrddir}/winbind%{samba_major} %attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind* %{_mandir}/man8/winbindd*.8* %{_mandir}/man1/wbinfo*.1* %endif %if %build_wins %files -n nss_wins%{samba_major} %defattr(-,root,root) %attr(755,root,root) /%{_lib}/libnss_wins%{samba_major}.so* %endif %if %{?_without_test:0}%{!?_without_test:1} %files test %defattr(-,root,root) %{_bindir}/debug2html%{samba_major} %{_bindir}/smbtorture%{samba_major} %{_bindir}/msgtest%{samba_major} %{_bindir}/masktest%{samba_major} %{_bindir}/locktest%{samba_major} %{_bindir}/locktest2%{samba_major} %{_bindir}/nsstest%{samba_major} %{_bindir}/vfstest%{samba_major} %{_mandir}/man1/vfstest%{samba_major}*.1* %else %exclude %{_mandir}/man1/vfstest%{samba_major}*.1* %endif %if %build_system %files -n libsmbclient%{libsmbmajor} %defattr(-,root,root) %{_libdir}/libsmbclient.so* %else %exclude %{_libdir}/libsmbclient.so* %endif %if %build_system %files -n libsmbclient%{libsmbmajor}-devel %defattr(-,root,root) %{_includedir}/* %else %exclude %{_includedir}/* %endif %if %build_system %files -n libsmbclient%{libsmbmajor}-static-devel %defattr(-,root,root) %{_libdir}/libsmbclient.a %else %exclude %{_libdir}/libsmbclient.a %endif #%files passdb-ldap #%defattr(-,root,root) #%{_libdir}/%{name}/*/*ldap.so %ifnarch alpha %files passdb-mysql %defattr(-,root,root) %{_libdir}/%{name}/pdb/*mysql.so %endif %files passdb-xml %defattr(-,root,root) %{_libdir}/%{name}/pdb/*xml.so #Files for antivirus support: %if %build_fprot %files vscan-fprot %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-fprotd.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_kaspersky %files vscan-kaspersky %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-kavp.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_mks %files vscan-mks %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-mksd.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_openav %files vscan-openav %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-oav.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_sophos %files vscan-sophos %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-sophos.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_symantec %files vscan-symantec %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-symantec.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %if %build_trend %files vscan-trend %defattr(-,root,root) %{_libdir}/%{name}/vfs/vscan-trend.so %config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf %doc %{vfsdir}/%{vscandir}/INSTALL %endif %exclude %{_mandir}/man1/smbsh*.1* %changelog * Mon Jul 28 2003 Buchan Milne 3.0.0-0.beta3.3mdk - Rebuild for kerberos-1.3 on cooker - Put printer directories back - Add mount.cifs - Go back to standard optimisations * Thu Jul 17 2003 Buchan Milne 3.0.0-0.beta3.2mdk - beta3 - remove -g from cflags to avoid large static libraries - drop optimisation from O2 to O1 for gcc 3.3.1 - own some directories for distriblint's benefit - use chrpath on distro's that have it to drastically reduce rpmlint score * Mon Jul 14 2003 Buchan Milne 3.0.0-0.beta2.3mdk - place non-conditional excludes at the end of files list, to prevent causing rpm in Mandrake <=8.2 from segfaulting when processing files. - Update default config * Wed Jul 02 2003 Buchan Milne 3.0.0-0.beta2.2mdk - 3.0.0beta2 - manually build editreg - Add some new man pages * Tue Jun 10 2003 Buchan Milne 3.0.0-0.beta1.3mdk - add provision for passdb-ldap subpackage (it doesn't build like that yet) - avoid debugging info on cooker/9.2 for the moment - We probably don't need to autoconf (and can thus build on 8.1) - We can probably build without kerberos support (and thus on 8.0) - Don't require mysql-devel on alpha's (maybe we want to be able to disable mysql support for other arches?) - We shouldn't need to specifically add openssl to include path, since ssl support is deprecated. - png icons, change menu title to not conflict with ksambaplugin - update to samba-vscan-0.3.3beta1, but it still does not build the vscan modules. - add -static-devel package - Add buildrequires for lib packages that are picked up if installed (ncurses, popt) in an attempt to get slbd to build samba3 - Fix default config (P100) * Sun Jun 08 2003 Buchan Milne 3.0.0-0.beta1.2mdk - Get packages into cooker (klama doesn't want to build this package ..) - samba-vscan-0.3.2b * Fri Jun 06 2003 Buchan Milne 3.0-0.alpha24.2mdk - Rename debug package to test and other fixes for rpm-4.2 - prepare for beta1 * Wed Apr 30 2003 Buchan Milne 3.0-0.alpha24.1mdk - Remove some files removed upstream - In builds from source, don't terminate on missing docs or unpackaged files (if only we could do it for other missing files ...) * Mon Apr 28 2003 Buchan Milne 3.0-0.alpha24.0mdk - Reenable debug package by (--without debug to not build it), fixed post-a23 - Add bugzilla note for builds from source (also intended for packages made available on samba FTP site) at samba team request - Fix build from CVS (run autogen.sh, pass options to all rpm commands) - Appease distriblint, but not much to be done about /usr/share/swat3/ since samba-doc owns some subdirs, and samba-swat others, and they can be installed independantly. - Apply kaspersky vscan build fix from samba2 - Final for alpha24 * Wed Apr 23 2003 Buchan Milne 3.0-0.alpha23.3mdk - Small fixes in preparation for testing as system samba - Make debug package optional (--with debug) since it's often broken - Add support for 9.2 (including in-line smbd quota patch for glibc2.3) - Add --with options option, which will just show you the available options and exit * Sun Apr 06 2003 Buchan Milne 3.0-0.alpha23.2mdk - Alpha23 - buildrequire autconf2.5 - samba-vscan 0.3.2a - Remove patch 102 (upstreamed) * Thu Mar 06 2003 Buchan Milne 3.0-0.alpha22.2mdk - Alpha22 - Add profiles binary to server and ntlm_auth to common - smbwrapper and torture target broken (only in 9.0?) - remove unused source 2 * Tue Mar 04 2003 Buchan Milne 3.0-0.alpha21.4mdk - Don't provide samba-{server,client,common} when not system samba (bug #2617) - Don't build libsmbclient packages when not system samba - Fix conflict between samba-server and samba3-server (pam_smbpass) - Fix smbwrapper (from 2.2.7a-5mdk for bug #2356) - Fix codepage/charset example (bug #1574) * Thu Jan 23 2003 Buchan Milne 3.0-0.alpha21.3mdk - samba-vscan 0.3.1 (and make it build again), including required inline edits - Make all vscan packages provide samba(3)-vscan - Build all vscan except kav (requires kaspersky lib) with --with-scanners - Add vscan-(scanner).conf files - Explicitly add ldapsam for 2.2 compatability when building --with ldap, default build now uses new ldap passdb backend (ie you always get ldap) - Enable (experimental) tdb passdb backend - Fix file ownership conflicts between server and common - Cleanup configure, to match order of --help - Fix libdir location, was being overridden by --with-fhs - Split off a libsmbclient and -devel package - Add wins replication init script (patch 102) - Workaround passdb/pdb_xml.c not compiling - Workaround missing install targets for smbsh/smbwrapper.so in cvs - Inline patch smbd/quotas.c for Mandrake >9.0 * Wed Nov 27 2002 Buchan Milne 3.0-0.alpha21.2mdk - Remove patch 20,21,22,23,25,26 (upstream) - New destdir patch from cvs (18) - package installed but non-packaged files - new debug subpackage for vfstest and related files (it was that or nuke the manpage ;-)) - use _libdir for libdir instead of _sysconfdir - Update samba-vscan (untested) * Mon Oct 28 2002 Buchan Milne 3.0-0.alpha20.3mdk - Fix mount.smbfs3 pointing to smbmount not in package - Remove unnecessary lines from install (now done by make) - Build with ldap and ads on all releases by default - Put av-stuff back * Mon Oct 21 2002 Buchan Milne 3.0-0.alpha20.2mdk - When not building as system samba, avoid conflicting with system samba - Macro-ize as much as possible for above (aka finish cleanups) - Fix paths in init scripts and logrotate and xinetd - Fix provides and obsoletes so as to provide samba, but not obsolete current stable until we have a stable release (when it's the system samba). - Add warnings to descriptions when not system samba. - This is now parallel installable with the normal samba release, for easy testing. It shouldn't touch existing installations. Of course, only one samba at a time on the same interface! * Sat Sep 28 2002 Buchan Milne 3.0-0.alpha20.1mdk - Merge with 2.2.6pre2.2mdk - Detect alpha- and beta-, along with pre-releases * Tue Feb 05 2002 Buchan Milne 3.0-alpha14-0.1mdk - Sync with 2.2.3-2mdk (new --without options, detect when building for a different distribution. * Mon Feb 04 2002 Buchan Milne 3.0-alpha14-0.0mdk - Sync with 2.2.2-10mdk, which added build-time options --with ldap, winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added warning in description if built with these options. * Wed Jan 23 2002 Buchan Milne 3.0-alpha13-0.2mdk - Added if's for build_ads, which hopefully will add Active Directory Support (by request). * Thu Jan 17 2002 Buchan Milne 3.0-alpha13-0.1mdk - More syncing with 2.2 rpm (post and postun scripts) - Testing without ldap * Thu Jan 17 2002 Buchan Milne 3.0-alpha13-0.0mdk - 3.0-alpha13 - Fixed installman.sh patch. * Wed Jan 09 2002 Buchan Milne 3.0-alpha12-0.1mdk - Fixed %post and %preun for nss_wins, added %post and %preun for samba-winbind (chkconfig and winbind entries in nsswitch.conf) * Sun Dec 23 2001 Buchan Milne 3.0-alpha12-0.0mdk - 3.0-alpha12 - Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2 - Added new subpackage for swat - More if's for ldap. * Thu Dec 20 2001 Buchan Milne 3.0-alpha11-0.0mdk - 3.0-alpha11 * Wed Dec 19 2001 Buchan Milne 3.0alpha10-0.0mdk - 3.0-alpha10 * Tue Dec 18 2001 Buchan Milne 3.0alpha9-0.0mdk - 3.0-alpha9 * Mon Dec 17 2001 Buchan Milne 3.0alpha8-0.1mdk - Added net command to %files common, pdbedit and smbgroupedit to %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup). Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches) * Sun Dec 16 2001 Buchan Milne 3.0alpha8-0.0mdk - Patch for installman.sh to handle lang=en correctly (p24) - added --with-manpages-langs=en,ja,pl (translated manpages), but there aren't any manpages for these languages yet ... so we still need %dir and %doc entries for them ... - patch (p25) to configure.in to support more than 2 languages. - addtosmbpass seems to have returned for now, but make_* have disappeared! * Fri Dec 14 2001 Buchan Milne 3.0alpha6-0.0mdk - DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts this forces move of smbcontrol and smbmnt to %{prefix}/bin removed --with-pam_smbpass as it doesn't compile. * Thu Dec 06 2001 Buchan Milne 3.0-0.0alpha1mdk - Samba 3.0alpha1 released (we missed Samba 3.0alpha0!) - Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch (applied upstream), removed ook-patch (codepage directory totally different). - Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 should be applied upstream before 3.0 ships ... * Wed Dec 05 2001 Sylvestre Taburet 2.2.2-6mdk - fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck). - fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy). * Fri Nov 23 2001 Sylvestre Taburet 2.2.2-5mdk - Had to remove the network recycle bin patch: it seems to mess up file deletion from windows (files appear to be "already in use") * Tue Nov 13 2001 Sylvestre Taburet 2.2.2-4mdk - added network recycle bin patch: - added "recycle bin = .recycled" parameter in smb.conf [homes]. - fixed winbind/nss_wins perms (oh no I don't own that stuff ;o) * Mon Nov 12 2001 Sylvestre Taburet 2.2.2-3mdk - added %build 8.0 and 7.2, for tweakers to play around. - changed configure options: . removed --with-mmap, --with-netatalk (obsolete). . added --with-msdfs, --with-vfs (seems stable, but still need testing). * Mon Nov 12 2001 Sylvestre Taburet 2.2.2-2mdk - rebuilt with winbind and nss_wins enabled. * Wed Oct 31 2001 Sylvestre Taburet 2.2.2-1mdk - Rebuilt on cooker. * Wed Oct 31 2001 Buchan Milne 2.2.2-0.992mdk - Patch for smb.conf to fix incorrect lpq command, typo in winbind, and add sample linpopup command. Added print driver directories. - New XFS quota patch (untested!, samba runs, but do quotas work? We can't check yet since the kernel doesn't seem to support XFS quotas!) * Fri Oct 19 2001 Sylvestre Taburet 2.2.2-0.99mdk - New samba.spec, almost ready for winbind operations. OLA for Buchan Milne Who did a tremendous integration work on 2.2.2. Rebuild on cooker, please test XFS (ACLs and quotas) again... * Mon Oct 15 2001 Buchan Milne 2.2.2-0.9mdk - Samba-2.2.2. released! Use %defines to determine which subpackages are built and which Mandrake release we are buiding on/for (hint: define build_mdk81 1 for Mandrake 8.1 updates) * Sun Oct 14 2001 Buchan Milne 2.2.2-0.20011014mdk - %post and %postun for nss_wins * Wed Oct 10 2001 Buchan Milne 2.2.2-0.20011010mdk - New CVS snapshot, /etc/pam.d/system-auth-winbind added with configuration to allow easy winbind setup. * Sun Oct 7 2001 Buchan Milne 2.2.2-0.20011007mdk - Added new package nss_wins and moved smbpasswd to common (required by winbind). * Sat Oct 6 2001 Buchan Milne 2.2.2-0.20011006mdk - Added new package winbind. * Mon Oct 1 2001 Buchan Milne 2.2.2-0.20011001mdk - Removed patch to smb init.d file (applied in cvs) * Sun Sep 30 2001 Buchan Milne 2.2.2-0.20010930mdk - Added winbind init script, which still needs to check for running nmbd. * Thu Sep 27 2001 Buchan Milne 2.2.2-0.20010927mdk - Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and pam_winbind, moved pam_smbpass from samba-common to samba. We still need a start-up script for winbind, or need to modify existing one. * Mon Sep 10 2001 Sylvestre Taburet 2.2.1a-15mdk - Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou) Added smbd patch to support XFS quota (Nathan Scott) * Mon Sep 10 2001 Sylvestre Taburet 2.2.1a-14mdk - Oops! smbpasswd created in wrong directory... * Tue Sep 06 2001 Sylvestre Taburet 2.2.1a-13mdk - Removed a wrong comment in smb.conf. Added creation of smbpasswd during install. * Mon Aug 27 2001 Pixel 2.2.1a-12mdk - really less verbose %%post * Sat Aug 25 2001 Geoffrey Lee 2.2.1a-11mdk - Fix shared libs in /usr/bin silliness. * Thu Aug 23 2001 Pixel 2.2.1a-10mdk - less verbose %%post * Wed Aug 22 2001 Buchan Milne 2.2.1a-9mdk - Added smbcacls (missing in %files), modification to smb.conf: ([printers] is still needed, even with point-and-print!, user add script should use name and not gid, since we may not get the gid . New script for putting manpages in place (still need to be added in %files!). Moved smbcontrol to sbin and added it and its man page to %files. * Wed Aug 22 2001 Pixel 2.2.1a-8mdk - cleanup /var/lib/samba/codepage/src * Tue Aug 21 2001 Sylvestre Taburet 2.2.1a-7mdk - moved codepage generation to %%install and codepage dir to /var/lib/samba * Tue Aug 21 2001 Sylvestre Taburet 2.2.1a-6mdk - /lib/* was in both samba and samba-common Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember when Samba was under the Megabyte..." * Fri Aug 03 2001 Sylvestre Taburet 2.2.1a-5mdk - Added "the gc touch" to smbinit through the use of killall -0 instead of grep cupsd | grep -v grep (too many greps :o) * Wed Jul 18 2001 Stefan van der Eijk 2.2.1a-4mdk - BuildRequires: libcups-devel - Removed BuildRequires: openssl-devel * Fri Jul 13 2001 Sylvestre Taburet 2.2.1a-3mdk - replace chkconfig --add/del with --level 35 on/reset. * Fri Jul 13 2001 Geoffrey Lee 2.2.1a-2mdk - Replace discription s/inetd/xinetd/, we all love xinetd, blah. * Thu Jul 12 2001 Buchan Milne 2.2.1a-1mdk - Bugfix release. Fixed add user script, added print$ share and printer admin We need to test interaction of new print support with CUPS, but printer driver uploads should work. * Wed Jul 11 2001 Sylvestre Taburet 2.2.1-17mdk - fixed smb.conf a bit, rebuilt on cooker. * Tue Jul 10 2001 Buchan Milne 2.2.1-16mdk - Finally, samba 2.2.1 has actually been release. At least we were ready! Cleaned up smb.conf, and added some useful entries for domain controlling. Migrated changes made in samba's samba2.spec for 2.2.1 to this file. Added groupadd command in post to create a group for samba machine accounts. (We should still check the postun, samba removes pam, logs and cache) * Tue Jun 26 2001 Sylvestre Taburet 2.2.1-15mdk - fixed smbwrapper compile options. * Tue Jun 26 2001 Sylvestre Taburet 2.2.1-14mdk - added LFS support. added smbwrapper support (smbsh) * Wed Jun 20 2001 Sylvestre Taburet 2.2.1-13mdk - /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location of smbmount (/usr/bin/smbmount) * Tue Jun 19 2001 Sylvestre Taburet 2.2.1-12mdk - smbmount and smbumount are now in /usr/bin and SUID. added ||: to triggerpostun son you don't get error 1 anymore when rpm -e Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)! * Tue Jun 19 2001 Geoffrey Lee 2.2.1-11mdk - s/Copyright/License/; - Stop Sylvester from pretending .gz source to be .bz2 source via filename aka really bzip2 the source. * Mon Jun 18 2001 Sylvestre Taburet 2.2.1-10mdk - changed Till's startup script modifications: now samba is being reloaded automatically 1 minute after it has started (same reasons as below in 9mdk) added _post_ and _preun_ for service smb fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing) * Thu Jun 14 2001 Till Kamppeter 2.2.1-9mdk - Modified the Samba startup script so that in case of CUPS being used as printing system Samba only starts when the CUPS daemon is ready to accept requests. Otherwise the CUPS queues would not appear as Samba shares. * Mon Jun 11 2001 Sylvestre Taburet 2.2.1-8mdk - patched smbmount.c to have it call smbmnt in sbin (thanks Seb). * Wed May 30 2001 Sylvestre Taburet 2.2.1-7mdk - put SWAT menu icons back in place. * Mon May 28 2001 Sylvestre Taburet 2.2.1-6mdk - OOPS! fixed smbmount symlinks * Mon May 28 2001 Sylvestre Taburet 2.2.1-5mdk - removed inetd postun script, replaced with xinetd. updated binary list (smbcacls...) cleaned samba.spec * Mon May 28 2001 Buchan Milne 2.2.1-4mdk - Changed configure options to point to correct log and codepage directories, added crude script to fix logrotate file for new log file names, updated patches to work with current CVS. * Thu May 24 2001 Sylvestre Taburet 2.2.1-3mdk - Cleaned and updated the %files section. * Sat May 19 2001 Sylvestre Taburet 2.2.1-2mdk - Moved all samba files from /etc to /etc/samba (Thanks DomS!). Fixed fixinit patch (/etc/samba/smb.conf) * Fri May 18 2001 Buchan Milne 2.2.1-1mdk - Now use packaging/Mandrake/smb.conf, removed unused and obsolete patches, moved netlogon and profile shares to /var/lib/samba in the smb.conf to match the spec file. Added configuration for ntlogon to smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed symlink I introduced in 2.2.0-1mdk * Thu May 3 2001 Sylvestre Taburet 2.2.0-5mdk - Added more configure options. Changed Description field (thx John T). * Wed Apr 25 2001 Sylvestre Taburet 2.2.0-4mdk - moved netlogon and profiles to /var/lib/samba by popular demand ;o) * Tue Apr 24 2001 Sylvestre Taburet 2.2.0-3mdk - moved netlogon and profiles back to /home. * Fri Apr 20 2001 Sylvestre Taburet 2.2.0-2mdk - fixed post inetd/xinetd script& * Thu Apr 19 2001 Buchan Milne 2.2.0-1mdk - Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches to take. smbadduser and addtosmbpass seem to have disappeared. Moved all Mandrake-specific files to packaging/Mandrake and made patches from those shipped with samba. Moved netlogon to /home/samba and added /home/samba/profiles. Added winbind,smbfilter and debug2html to make command. * Thu Apr 12 2001 Frederic Crozat 2.0.7-25mdk - Fix menu entry and provide separate menu entry for GNOME (nautilus doesn't support HTTP authentication yet) - Add icons in package * Fri Mar 30 2001 Frederic Lepied 2.0.7-24mdk - use new server macros * Wed Mar 21 2001 Sylvestre Taburet 2.0.7-23mdk - check whether /etc/inetd.conf exists (upgrade) or not (fresh install). * Thu Mar 15 2001 Sylvestre Taburet 2.0.7-22mdk - spec cosmetics, added '-r' option to lpr-cups command line so files are removed from /var/spool/samba after printing. * Tue Mar 06 2001 Sylvestre Taburet 2.0.7-21mdk - merged last rh patches. * Thu Nov 23 2000 Sylvestre Taburet 2.0.7-20mdk - removed dependencies on cups and cups-devel so one can install samba without using cups - added /home/netlogon * Mon Nov 20 2000 Till Kamppeter 2.0.7-19mdk - Changed default print command in /etc/smb.conf, so that the Windows driver of the printer has to be used on the client. - Fixed bug in smbspool which prevented from printing from a Linux-Samba-CUPS client to a Windows server through the guest account. * Mon Oct 16 2000 Till Kamppeter 2.0.7-18mdk - Moved "smbspool" (Samba client of CUPS) to the samba-client package * Sat Oct 7 2000 Stefan van der Eijk 2.0.7-17mdk - Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes quota related compile problems on the alpha. * Wed Oct 4 2000 Sylvestre Taburet 2.0.7-16mdk - Fixed 'guest ok = ok' flag in smb.conf * Tue Oct 3 2000 Sylvestre Taburet 2.0.7-15mdk - Allowed guest account to print in smb.conf - added swat icon in menu * Tue Oct 3 2000 Sylvestre Taburet 2.0.7-14mdk - Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2 * Tue Oct 3 2000 Sylvestre Taburet 2.0.7-13mdk - Changed fixinit patch. - Changed smb.conf for better CUPS configuration. - Thanks Fred for doing this ---vvv. * Tue Oct 3 2000 Frederic Lepied 2.0.7-12mdk - menu entry for web configuration tool. - merge with rh: xinetd + ssl + pam_stack. - Added smbadduser rh-bugfix w/o relocation of config-files. * Mon Oct 2 2000 Frederic Lepied 2.0.7-11mdk - added build requires on cups-devel and pam-devel. * Mon Oct 2 2000 Till Kamppeter 2.0.7-10mdk - Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was wrong. * Mon Sep 25 2000 Sylvestre Taburet 2.0.7-9mdk - Cosmetic changes to make rpmlint more happy * Wed Sep 11 2000 Sylvestre Taburet 2.0.7-8mdk - added linkage to the using_samba book in swat * Fri Sep 01 2000 Sylvestre Taburet 2.0.7-7mdk - Added CUPS support to smb.conf - Added internationalization options to smb.conf [Global] * Wed Aug 30 2000 Till Kamppeter 2.0.7-6mdk - Put "smbspool" to the files to install * Wed Aug 30 2000 Sylvestre Taburet 2.0.7-5mdk - Did some cleaning in the patches * Fri Jul 28 2000 Sylvestre Taburet 2.0.7-4mdk - relocated man pages from /usr/man to /usr/share/man for compatibility reasons * Fri Jul 28 2000 Sylvestre Taburet 2.0.7-3mdk - added make_unicodemap and build of unicode_map.$i in the spec file * Fri Jul 28 2000 Sylvestre Taburet 2.0.7-2mdk - renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug. * Fri Jul 07 2000 Sylvestre Taburet 2.0.7-1mdk - 2.0.7 * Wed Apr 05 2000 Francis Galiegue 2.0.6-4mdk - Titi sucks, does not put versions in changelog - Fixed groups for -common and -client - /usr/sbin/samba is no config file * Thu Mar 23 2000 Thierry Vignaud - fix buggy post install script (pixel) * Fri Mar 17 2000 Francis Galiegue 2.0.6-2mdk - Changed group according to 7.1 specs - Some spec file changes - Let spec-helper do its job * Thu Nov 25 1999 Chmouel Boudjnah - 2.0.6. * Tue Nov 2 1999 Chmouel Boudjnah - Merge with rh changes. - Split in 3 packages. * Fri Aug 13 1999 Pablo Saratxaga - corrected a bug with %post (the $1 parameter is "1" in case of a first install, not "0". That parameter is the number of packages of the same name that will exist after running all the steps if nothing is removed; so it is "1" after first isntall, "2" for a second install or an upgrade, and "0" for a removal) * Wed Jul 28 1999 Pablo Saratxaga - made smbmnt and smbumount suid root, and only executable by group 'smb' add to 'smb' group any user that should be allowed to mount/unmount SMB shared directories * Fri Jul 23 1999 Chmouel Boudjnah - 2.0.5a (bug security fix). * Wed Jul 21 1999 Axalon Bloodstone - 2.0.5 - cs/da/de/fi/fr/it/tr descriptions/summaries * Sun Jun 13 1999 Bernhard Rosenkränzer - 2.0.4b - recompile on a system that works ;) * Wed Apr 21 1999 Chmouel Boudjnah - Mandrake adaptations. - Bzip2 man-pages. * Fri Mar 26 1999 Bill Nottingham - add a mount.smb to make smb mounting a little easier. - smb filesystems apparently do not work on alpha. Oops. * Thu Mar 25 1999 Bill Nottingham - always create codepages * Tue Mar 23 1999 Bill Nottingham - logrotate changes * Sun Mar 21 1999 Cristian Gafton - auto rebuild in the new build environment (release 3) * Fri Mar 19 1999 Preston Brown - updated init script to use graceful restart (not stop/start) * Tue Mar 9 1999 Bill Nottingham - update to 2.0.3 * Thu Feb 18 1999 Bill Nottingham - update to 2.0.2 * Mon Feb 15 1999 Bill Nottingham - swat swat * Tue Feb 9 1999 Bill Nottingham - fix bash2 breakage in post script * Fri Feb 5 1999 Bill Nottingham - update to 2.0.0 * Mon Oct 12 1998 Cristian Gafton - make sure all binaries are stripped * Thu Sep 17 1998 Jeff Johnson - update to 1.9.18p10. - fix %triggerpostun. * Tue Jul 07 1998 Erik Troan - updated postun triggerscript to check $0 - clear /etc/codepages from %preun instead of %postun * Mon Jun 08 1998 Erik Troan - made the %postun script a tad less agressive; no reason to remove the logs or lock file (after all, if the lock file is still there, samba is still running) - the %postun and %preun should only exectute if this is the final removal - migrated %triggerpostun from Red Hat's samba package to work around packaging problems in some Red Hat samba releases * Sun Apr 26 1998 John H Terpstra - minor tidy up in preparation for release of 1.9.18p5 - added findsmb utility from SGI package * Wed Mar 18 1998 John H Terpstra - Updated version and codepage info. - Release to test name resolve order * Sat Jan 24 1998 John H Terpstra - Many optimisations (some suggested by Manoj Kasichainula - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb - Compounded make line - Updated smb.init restart mechanism - Use compound mkdir -p line instead of individual calls to mkdir - Fixed smb.conf file path for log files - Fixed smb.conf file path for incoming smb print spool directory - Added a number of options to smb.conf file - Added smbadduser command (missed from all previous RPMs) - Doooh! - Added smbuser file and smb.conf file updates for username map