#########################################################################
# Makefile.in for Samba - rewritten for autoconf support
# Copyright Andrew Tridgell 1992-1998
# Copyright (C) 2001 by Martin Pool <mbp@samba.org>
# Copyright Andrew Bartlett 2002
# Copyright (C) 2003 Jim McDonough <jmcd@us.ibm.com>
# Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org>
# Copyright (C) 2006 Lars Mueller <lars@samba.org>
###########################################################################

prefix=@prefix@
exec_prefix=@exec_prefix@
sysconfdir=@sysconfdir@
localstatedir=@localstatedir@
datarootdir=@datarootdir@

selftest_prefix=@selftest_prefix@
smbtorture4_path=@smbtorture4_path@

LIBS=@LIBS@
CC=@CC@
SHLD=@SHLD@

## Dynamic shared libraries build settings
DSO_EXPORTS_CMD=-Wl,--version-script,$(srcdir)/exports/`basename $@ | sed 's/@SHLIBEXT@$$/syms/'`
DSO_EXPORTS=@DSO_EXPORTS@
SONAME_VER=`grep ^$@ $(builddir)/library-versions | cut -d: -f2`
SHLD_DSO = $(SHLD) $(LDSHFLAGS) $(DSO_EXPORTS) -o $@

# Add $(DEVELOPER_CFLAGS) to $(CFLAGS) to enable extra compiler
# (GCC) warnings. This is done automtically for --enable-developer
# and --enable-krb5developer.
DEVELOPER_CFLAGS=@DEVELOPER_CFLAGS@
CFLAGS=@CFLAGS@
CPPFLAGS=-DHAVE_CONFIG_H @CPPFLAGS@

EXEEXT=@EXEEXT@
LDFLAGS=@PIE_LDFLAGS@ @LDFLAGS@
AR=@AR@
LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@

# The MODULE_EXPORTS variable conatins the platform-specific linker flags
# needed to restrict the exports for VFS, IDMAP, RPC and PASSDB modules.
MODULE_EXPORTS=@MODULE_EXPORTS@

WINBIND_NSS_LDSHFLAGS=@WINBIND_NSS_LDSHFLAGS@ @LDFLAGS@
AWK=@AWK@
PICFLAG=@PICFLAG@
DYNEXP=@DYNEXP@
PYTHON=@PYTHON@
PERL=@PERL@

PIDL_ARGS=@PIDL_ARGS@

TERMLDFLAGS=@TERMLDFLAGS@
TERMLIBS=@TERMLIBS@
PRINT_LIBS=@PRINT_LIBS@
AUTH_LIBS=@AUTH_LIBS@
ACL_LIBS=@ACL_LIBS@
PASSDB_LIBS=@PASSDB_LIBS@
IDMAP_LIBS=@IDMAP_LIBS@
KRB5LIBS=@KRB5_LIBS@
LDAP_LIBS=@LDAP_LIBS@
NSCD_LIBS=@NSCD_LIBS@
UUID_LIBS=@UUID_LIBS@

INSTALLCMD=@INSTALL@
INSTALLLIBCMD_SH=@INSTALLLIBCMD_SH@
INSTALLLIBCMD_A=@INSTALLLIBCMD_A@
UNINSTALLLIBCMD_SH=@UNINSTALLLIBCMD_SH@
UNINSTALLLIBCMD_A=@UNINSTALLLIBCMD_A@

VPATH=@srcdir@
srcdir=@abs_srcdir@
builddir=@abs_builddir@
SHELL=/bin/sh
DESTDIR=/

# XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
# will search for a POSIX-compliant shell, and that might not be
# /bin/sh on some platforms.  I guess it's not a big problem -- mbp

# See the autoconf manual "Installation Directory Variables" for a
# discussion of the subtle use of these variables.

BASEDIR= @prefix@
BINDIR = @bindir@
# sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
SBINDIR = @sbindir@
ROOTSBINDIR = @rootsbindir@
LIBDIR = @libdir@
PAMMODULESDIR = @pammodulesdir@
VFSLIBDIR = $(LIBDIR)/vfs
PDBLIBDIR = $(LIBDIR)/pdb
RPCLIBDIR = $(LIBDIR)/rpc
IDMAPLIBDIR = $(LIBDIR)/idmap
NSSINFOLIBDIR = $(LIBDIR)/nss_info
CHARSETLIBDIR = $(LIBDIR)/charset
AUTHLIBDIR = $(LIBDIR)/auth
CONFIGLIBDIR = $(LIBDIR)/config
CONFIGDIR = @configdir@
VARDIR = @localstatedir@
MANDIR = @mandir@
DATADIR = @datadir@

# The permissions to give the executables and other data
INSTALLPERMS_BIN = 0755
INSTALLPERMS_DATA = 0644

# set these to where to find various files
# These can be overridden by command line switches (see smbd(8))
# or in smb.conf (see smb.conf(5))
LOGFILEBASE = @logfilebase@
CONFIGFILE = $(CONFIGDIR)/smb.conf
LMHOSTSFILE = $(CONFIGDIR)/lmhosts
CTDBDIR = @ctdbdir@

# This is where smbpasswd et al go
PRIVATEDIR = @privatedir@

SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
PRIVATE_DIR = $(PRIVATEDIR)

# This is where SWAT images and help files go
SWATDIR = @swatdir@

# the directory where lock files go
LOCKDIR = @lockdir@

# the directory where pid files go
PIDDIR = @piddir@

LIBSMBCLIENT=bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
LIBMSRPC=bin/libmsrpc.a @LIBMSRPC_SHARED@
LIBSMBSHAREMODES=bin/libsmbsharemodes.a @LIBSMBSHAREMODES_SHARED@
LIBADDNS=bin/libaddns.a @LIBADDNS_SHARED@

FLAGS1 = $(CFLAGS) @FLAGS1@ @SAMBA_CPPFLAGS@ $(CPPFLAGS)
FLAGS2 =
FLAGS3 =
FLAGS4 = -I$(CTDBDIR)/include
FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
FLAGS  = $(ISA) $(FLAGS5) -I$(srcdir)/lib -D_SAMBA_BUILD_=3

PATH_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" \
	-DPRIVATE_DIR=\"$(PRIVATE_DIR)\" \
	-DCONFIGFILE=\"$(CONFIGFILE)\" \
	-DSBINDIR=\"$(SBINDIR)\" \
	-DBINDIR=\"$(BINDIR)\" \
	-DLMHOSTSFILE=\"$(LMHOSTSFILE)\" \
	-DSWATDIR=\"$(SWATDIR)\" \
	-DLOCKDIR=\"$(LOCKDIR)\" \
	-DPIDDIR=\"$(PIDDIR)\" \
	-DLIBDIR=\"$(LIBDIR)\" \
	-DLOGFILEBASE=\"$(LOGFILEBASE)\" \
	-DSHLIBEXT=\"@SHLIBEXT@\" \
	-DCTDBDIR=\"$(CTDBDIR)\" \
	-DCONFIGDIR=\"$(CONFIGDIR)\"

# Note that all executable programs now provide for an optional executable suffix.

SBIN_PROGS = bin/smbd@EXEEXT@ bin/nmbd@EXEEXT@ @SWAT_SBIN_TARGETS@ @EXTRA_SBIN_PROGS@

ROOT_SBIN_PROGS = @CIFSMOUNT_PROGS@

BIN_PROGS1 = bin/smbclient@EXEEXT@ bin/net@EXEEXT@ bin/smbspool@EXEEXT@ \
	bin/testparm@EXEEXT@ bin/smbstatus@EXEEXT@ bin/smbget@EXEEXT@
BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/smbtree@EXEEXT@ bin/tdbbackup@EXEEXT@ \
	bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@ bin/tdbdump@EXEEXT@ \
	bin/tdbtool@EXEEXT@
BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \
	bin/profiles@EXEEXT@ bin/ntlm_auth@EXEEXT@ \
	bin/smbcquotas@EXEEXT@ bin/eventlogadm@EXEEXT@
BIN_PROGS4 = bin/ldbedit@EXEEXT@ bin/ldbsearch@EXEEXT@ bin/ldbadd@EXEEXT@ \
	bin/ldbdel@EXEEXT@ bin/ldbmodify@EXEEXT@

TORTURE_PROGS = bin/smbtorture@EXEEXT@ bin/msgtest@EXEEXT@ \
	bin/masktest@EXEEXT@ bin/locktest@EXEEXT@ \
	bin/locktest2@EXEEXT@ bin/nsstest@EXEEXT@ bin/vfstest@EXEEXT@ \
	bin/pdbtest@EXEEXT@ bin/talloctort@EXEEXT@ bin/replacetort@EXEEXT@ \
	bin/tdbtorture@EXEEXT@

BIN_PROGS = @EXTRA_BIN_PROGS@ @SMBMOUNT_PROGS@ \
	$(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) $(BIN_PROGS4) 

EVERYTHING_PROGS = bin/debug2html@EXEEXT@ bin/smbfilter@EXEEXT@ \
	bin/talloctort@EXEEXT@ bin/replacetort@EXEEXT@ \
	bin/log2pcap@EXEEXT@ bin/sharesec@EXEEXT@ bin/ndrdump@EXEEXT@

SHLIBS = @LIBSMBCLIENT@ @LIBSMBSHAREMODES@ @LIBMSRPC@ @LIBADDNS@

PAM_MODULES = @PAM_MODULES@

NSS_MODULES = @NSS_MODULES@

SCRIPTS = $(srcdir)/script/smbtar $(builddir)/script/findsmb

VFS_MODULES = @VFS_MODULES@
PDB_MODULES = @PDB_MODULES@
RPC_MODULES = @RPC_MODULES@
IDMAP_MODULES = @IDMAP_MODULES@
CHARSET_MODULES = @CHARSET_MODULES@
AUTH_MODULES = @AUTH_MODULES@
NSS_INFO_MODULES = @NSS_INFO_MODULES@
MODULES = $(VFS_MODULES) $(PDB_MODULES) $(RPC_MODULES) $(IDMAP_MODULES) \
          $(CHARSET_MODULES) $(AUTH_MODULES) $(NSS_INFO_MODULES)

######################################################################
# object file lists
######################################################################

TDBBASE_OBJ = lib/tdb/common/tdb.o lib/tdb/common/dump.o lib/tdb/common/error.o \
	lib/tdb/common/freelist.o lib/tdb/common/freelistcheck.o \
	lib/tdb/common/io.o lib/tdb/common/lock.o \
	lib/tdb/common/open.o lib/tdb/common/transaction.o \
	lib/tdb/common/traverse.o

TDB_OBJ = $(TDBBASE_OBJ) lib/util_tdb.o\
	lib/dbwrap.o lib/dbwrap_tdb.o lib/dbwrap_ctdb.o

SMBLDAP_OBJ = @SMBLDAP@ @SMBLDAPUTIL@

VERSION_OBJ = lib/version.o

DOSERR_OBJ = libsmb/doserr.o

WBCOMMON_OBJ = nsswitch/wb_common.o

AFS_OBJ = lib/afs.o

AFS_SETTOKEN_OBJ = lib/afs_settoken.o

SERVER_MUTEX_OBJ = lib/server_mutex.o

ERRORMAP_OBJ = libsmb/errormap.o

PASSCHANGE_OBJ = libsmb/passchange.o


LIBNDR_OBJ = librpc/ndr/ndr_basic.o librpc/ndr/ndr.o librpc/ndr/ndr_misc.o \
	     librpc/ndr/ndr_sec_helper.o librpc/ndr/ndr_string.o librpc/ndr/sid.o

RPCCLIENT_NDR_OBJ = rpc_client/ndr.o

LIBNDR_GEN_OBJ = librpc/gen_ndr/ndr_unixinfo.o librpc/gen_ndr/ndr_lsa.o \
		 librpc/gen_ndr/ndr_dfs.o librpc/gen_ndr/ndr_echo.o \
		 librpc/gen_ndr/ndr_winreg.o librpc/gen_ndr/ndr_initshutdown.o \
		 librpc/gen_ndr/ndr_srvsvc.o librpc/gen_ndr/ndr_svcctl.o \
		 librpc/gen_ndr/ndr_eventlog.o librpc/gen_ndr/ndr_wkssvc.o \
		 librpc/gen_ndr/ndr_notify.o \
		 librpc/gen_ndr/ndr_epmapper.o

RPC_PARSE_OBJ0 = rpc_parse/parse_prs.o rpc_parse/parse_misc.o

# this includes only the low level parse code, not stuff
# that requires knowledge of security contexts
RPC_PARSE_OBJ1 = $(RPC_PARSE_OBJ0) rpc_parse/parse_sec.o

RPC_PARSE_OBJ2 = rpc_parse/parse_rpc.o rpc_parse/parse_net.o

LIBREPLACE_OBJ = @LIBREPLACE_OBJS@

SOCKET_WRAPPER_OBJ = @SOCKET_WRAPPER_OBJS@

TALLOC_OBJ = lib/talloc/talloc.o


LIB_WITHOUT_PROTO_OBJ = $(LIBREPLACE_OBJ) $(SOCKET_WRAPPER_OBJ) $(TALLOC_OBJ) \
	lib/messages.o librpc/gen_ndr/ndr_messaging.o lib/messages_local.o \
	lib/messages_ctdbd.o lib/packet.o lib/ctdbd_conn.o

LIB_WITH_PROTO_OBJ = $(VERSION_OBJ) lib/charcnv.o lib/debug.o lib/fault.o \
	  lib/interface.o lib/md4.o \
	  lib/interfaces.o lib/pidfile.o \
	  lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
	  lib/ufc.o lib/genrand.o lib/username.o \
	  lib/util_pw.o lib/access.o lib/smbrun.o \
	  lib/bitmap.o lib/crc32.o lib/dprintf.o \
	  lib/xfile.o lib/wins_srv.o $(UTIL_REG_OBJ) \
	  lib/util_str.o lib/clobber.o lib/util_sid.o lib/util_uuid.o \
	  lib/util_unistr.o lib/util_file.o lib/data_blob.o \
	  lib/util.o lib/util_sock.o lib/sock_exec.o lib/util_sec.o \
	  lib/substitute.o lib/fsusage.o \
	  lib/ms_fnmatch.o lib/select.o lib/errmap_unix.o \
	  lib/tallocmsg.o lib/dmallocmsg.o libsmb/smb_signing.o \
	  lib/md5.o lib/hmacmd5.o lib/arc4.o lib/iconv.o \
	  nsswitch/wb_client.o $(WBCOMMON_OBJ) \
	  lib/pam_errors.o intl/lang_tdb.o lib/conn_tdb.o \
	  lib/adt_tree.o lib/gencache.o $(TDB_OBJ) \
	  lib/module.o lib/events.o lib/ldap_escape.o @CHARSET_STATIC@ \
	  lib/secdesc.o lib/util_seaccess.o lib/secace.o lib/secacl.o \
	  libads/krb5_errs.o lib/system_smbd.o lib/audit.o $(LIBNDR_OBJ) \
	  lib/file_id.o

LIB_OBJ = $(LIB_WITHOUT_PROTO_OBJ) $(LIB_WITH_PROTO_OBJ)

LIB_DUMMY_OBJ = lib/dummysmbd.o lib/dummyroot.o
LIB_NONSMBD_OBJ = $(LIB_OBJ) $(LIB_DUMMY_OBJ)

READLINE_OBJ = lib/readline.o

# Also depends on  $(SECRETS_OBJ) $(LIBSAMBA_OBJ)
# Be sure to include them into your application
POPT_LIB_OBJ = lib/popt_common.o

PARAM_WITHOUT_REG_OBJ = dynconfig.o param/loadparm.o param/params.o lib/sharesec.o
PARAM_REG_ADD_OBJ = $(UTIL_REG_API_OBJ)
PARAM_OBJ = $(PARAM_WITHOUT_REG_OBJ) $(PARAM_REG_ADD_OBJ)

KRBCLIENT_OBJ = libads/kerberos.o libads/ads_status.o

LIBADDNS_OBJ0 = libaddns/dnsrecord.o libaddns/dnsutils.o  libaddns/dnssock.o \
	       libaddns/dnsgss.o libaddns/dnsmarshall.o
LIBADDNS_OBJ = $(LIBADDNS_OBJ0) $(TALLOC_OBJ)

LIBGPO_OBJ0 = libgpo/gpo_ldap.o libgpo/gpo_ini.o libgpo/gpo_util.o \
	      libgpo/gpo_fetch.o libgpo/gpo_filesync.o libgpo/gpo_sec.o
LIBGPO_OBJ = $(LIBGPO_OBJ0)

LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o \
	     libads/sasl.o libads/sasl_wrapping.o \
	     libads/krb5_setpw.o libads/ldap_user.o \
	     libads/ads_struct.o libads/kerberos_keytab.o \
             libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
	     libads/cldap.o libads/ldap_schema.o

LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o libads/authdata.o

SECRETS_OBJ = passdb/secrets.o passdb/machine_sid.o

LIBNMB_OBJ = libsmb/unexpected.o libsmb/namecache.o libsmb/nmblib.o \
	     libsmb/namequery.o libsmb/conncache.o libads/dns.o

LIBSAMBA_OBJ = libsmb/nterr.o libsmb/dcerpc_err.o libsmb/smbdes.o \
	       libsmb/smbencrypt.o libsmb/ntlm_check.o \
	       libsmb/ntlmssp.o libsmb/ntlmssp_parse.o libsmb/ntlmssp_sign.o

LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
	     libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
	     libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
	     libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
	     libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
	     libsmb/clistr.o libsmb/cliquota.o libsmb/clifsinfo.o libsmb/clidfs.o \
             libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
	     libsmb/clioplock.o $(ERRORMAP_OBJ) libsmb/clirap2.o \
	     libsmb/smb_seal.o $(DOSERR_OBJ) \
	     $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(LIBNMB_OBJ)

RPC_CLIENT_OBJ1 = rpc_client/cli_netlogon.o

LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
	       $(RPC_CLIENT_OBJ1) rpc_client/cli_reg.o $(RPC_CLIENT_OBJ) \
	       rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
	       rpc_client/cli_ds.o rpc_client/cli_svcctl.o

LIBMSRPC_GEN_OBJ = librpc/gen_ndr/cli_unixinfo.o librpc/gen_ndr/cli_lsa.o \
		   librpc/gen_ndr/cli_dfs.o librpc/gen_ndr/cli_echo.o \
		   librpc/gen_ndr/cli_srvsvc.o librpc/gen_ndr/cli_svcctl.o \
		   librpc/gen_ndr/cli_winreg.o librpc/gen_ndr/cli_initshutdown.o \
		   librpc/gen_ndr/cli_eventlog.o librpc/gen_ndr/cli_epmapper.o \
		   $(LIBNDR_GEN_OBJ) $(RPCCLIENT_NDR_OBJ)

REGOBJS_OBJ = registry/reg_objects.o

REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
               registry/reg_db.o registry/reg_eventlog.o registry/reg_shares.o \
               registry/reg_util.o registry/reg_dynamic.o registry/reg_perfcount.o \
	       registry/reg_smbconf.o registry/reg_api.o \
	       registry/reg_frontend_hilvl.o \
	       $(UTIL_REG_API_OBJ) $(UTIL_REG_SMBCONF_OBJ)

RPC_LSA_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o librpc/gen_ndr/srv_lsa.o

RPC_NETLOG_OBJ = rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o

RPC_SAMR_OBJ = rpc_server/srv_samr.o rpc_server/srv_samr_nt.o \
               rpc_server/srv_samr_util.o

RPC_UNIXINFO_OBJ = librpc/gen_ndr/srv_unixinfo.o rpc_server/srv_unixinfo_nt.o
REGFIO_OBJ = registry/regfio.o

RPC_EPMAPPER_OBJ = librpc/gen_ndr/srv_epmapper.o rpc_server/srv_epmapper_nt.o

RPC_INITSHUTDOWN_OBJ =  librpc/gen_ndr/srv_initshutdown.o rpc_server/srv_initshutdown_nt.o

RPC_REG_OBJ =  rpc_server/srv_winreg_nt.o \
	       librpc/gen_ndr/srv_winreg.o \
	       $(REGFIO_OBJ)
RPC_LSA_DS_OBJ =  rpc_server/srv_lsa_ds.o rpc_server/srv_lsa_ds_nt.o

RPC_SVC_OBJ = librpc/gen_ndr/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o

RPC_WKS_OBJ =  librpc/gen_ndr/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o

RPC_SVCCTL_OBJ =  rpc_server/srv_svcctl.o rpc_server/srv_svcctl_nt.o \
		  librpc/gen_ndr/srv_svcctl.o \
                  services/svc_spoolss.o services/svc_rcinit.o services/services_db.o \
                  services/svc_netlogon.o services/svc_winreg.o \
                  services/svc_wins.o

RPC_NTSVCS_OBJ = rpc_server/srv_ntsvcs.o rpc_server/srv_ntsvcs_nt.o

RPC_DFS_OBJ =  librpc/gen_ndr/srv_dfs.o rpc_server/srv_dfs_nt.o

RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o

RPC_EVENTLOG_OBJ = rpc_server/srv_eventlog.o rpc_server/srv_eventlog_nt.o \
		   rpc_server/srv_eventlog_lib.o librpc/gen_ndr/srv_eventlog.o

RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o \
               rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o

RPC_ECHO_OBJ = rpc_server/srv_echo_nt.o librpc/gen_ndr/srv_echo.o

RPC_SERVER_OBJ = @RPC_STATIC@ $(RPC_PIPE_OBJ)

RPC_PARSE_OBJ = rpc_parse/parse_lsa.o $(RPC_PARSE_OBJ2) \
                rpc_parse/parse_samr.o \
                rpc_parse/parse_ds.o rpc_parse/parse_spoolss.o \
	        rpc_parse/parse_eventlog.o rpc_parse/parse_buffer.o \
                rpc_parse/parse_ntsvcs.o rpc_parse/parse_svcctl.o $(REGOBJS_OBJ)

RPC_CLIENT_OBJ = rpc_client/cli_pipe.o

LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o

PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o

PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
		passdb/util_wellknown.o passdb/util_builtin.o passdb/pdb_compat.o \
		passdb/util_unixsids.o passdb/lookup_sid.o \
		passdb/login_cache.o @PDB_STATIC@ \
		lib/account_pol.o lib/privileges.o lib/privileges_basic.o \
		lib/util_nscd.o

DEVEL_HELP_WEIRD_OBJ = modules/weird.o
CP850_OBJ = modules/CP850.o
CP437_OBJ = modules/CP437.o
CHARSET_MACOSXFS_OBJ = modules/charset_macosxfs.o

GROUPDB_OBJ = groupdb/mapping.o groupdb/mapping_tdb.o groupdb/mapping_ldb.o

PROFILE_OBJ = profile/profile.o
PROFILES_OBJ = utils/profiles.o \
               $(REGFIO_OBJ) $(REGOBJS_OBJ) $(ERRORMAP_OBJ) \
	       $(RPC_PARSE_OBJ1) $(PARAM_OBJ) $(LIBSAMBA_OBJ) \
               $(DOSERR_OBJ) $(LIB_OBJ) $(LIB_DUMMY_OBJ) \
               $(POPT_LIB_OBJ) $(SECRETS_OBJ)

OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o

NOTIFY_OBJ = smbd/notify.o smbd/notify_inotify.o smbd/notify_internal.o

VFS_DEFAULT_OBJ = modules/vfs_default.o
VFS_AUDIT_OBJ = modules/vfs_audit.o
VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
VFS_FULL_AUDIT_OBJ = modules/vfs_full_audit.o
VFS_FAKE_PERMS_OBJ = modules/vfs_fake_perms.o
VFS_RECYCLE_OBJ = modules/vfs_recycle.o
VFS_NETATALK_OBJ = modules/vfs_netatalk.o
VFS_DEFAULT_QUOTA_OBJ = modules/vfs_default_quota.o
VFS_READONLY_OBJ = modules/vfs_readonly.o modules/getdate.o
VFS_CAP_OBJ = modules/vfs_cap.o
VFS_EXPAND_MSDFS_OBJ = modules/vfs_expand_msdfs.o
VFS_SHADOW_COPY_OBJ = modules/vfs_shadow_copy.o
VFS_AFSACL_OBJ = modules/vfs_afsacl.o
VFS_POSIXACL_OBJ = modules/vfs_posixacl.o
VFS_AIXACL_OBJ = modules/vfs_aixacl.o modules/vfs_aixacl_util.o
VFS_AIXACL2_OBJ = modules/vfs_aixacl2.o modules/vfs_aixacl_util.o modules/nfs4_acls.o
VFS_SOLARISACL_OBJ = modules/vfs_solarisacl.o
VFS_ZFSACL_OBJ = modules/vfs_zfsacl.o modules/nfs4_acls.o
VFS_HPUXACL_OBJ = modules/vfs_hpuxacl.o
VFS_IRIXACL_OBJ = modules/vfs_irixacl.o
VFS_TRU64ACL_OBJ = modules/vfs_tru64acl.o
VFS_CATIA_OBJ = modules/vfs_catia.o
VFS_CACHEPRIME_OBJ = modules/vfs_cacheprime.o
VFS_PREALLOC_OBJ = modules/vfs_prealloc.o
VFS_COMMIT_OBJ = modules/vfs_commit.o
VFS_GPFS_OBJ = modules/vfs_gpfs.o modules/gpfs.o modules/nfs4_acls.o
VFS_NOTIFY_FAM_OBJ = modules/vfs_notify_fam.o
VFS_READAHEAD_OBJ = modules/vfs_readahead.o
VFS_FILEID_OBJ = modules/vfs_fileid.o

PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o

SLCACHE_OBJ = libsmb/samlogon_cache.o

DCUTIL_OBJ  = libsmb/namequery_dc.o libsmb/trustdom_cache.o libsmb/trusts_util.o

AUTH_BUILTIN_OBJ = auth/auth_builtin.o
AUTH_DOMAIN_OBJ = auth/auth_domain.o
AUTH_SAM_OBJ = auth/auth_sam.o
AUTH_SERVER_OBJ = auth/auth_server.o
AUTH_UNIX_OBJ = auth/auth_unix.o
AUTH_WINBIND_OBJ = auth/auth_winbind.o
AUTH_SCRIPT_OBJ = auth/auth_script.o

AUTH_OBJ = auth/auth.o @AUTH_STATIC@ auth/auth_util.o auth/token_util.o \
	   lib/util_nttoken.o \
	   auth/auth_compat.o auth/auth_ntlmssp.o \
	   $(PLAINTEXT_AUTH_OBJ) $(SLCACHE_OBJ) $(DCUTIL_OBJ)

MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o

SMBD_OBJ_MAIN = smbd/server.o

BUILDOPT_OBJ = smbd/build_options.o

SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
	       smbd/utmp.o smbd/session.o smbd/map_username.o \
               smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o \
	       smbd/share_access.o smbd/fileio.o \
               smbd/ipc.o smbd/lanman.o smbd/negprot.o \
               smbd/message.o smbd/nttrans.o smbd/pipes.o \
               smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
	       smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
	       smbd/blocking.o smbd/sec_ctx.o smbd/srvstr.o \
	       smbd/vfs.o smbd/statcache.o smbd/seal.o \
               smbd/posix_acls.o lib/sysacls.o $(SERVER_MUTEX_OBJ) \
	       smbd/process.o smbd/service.o smbd/error.o \
	       printing/printfsp.o lib/sysquotas.o lib/sysquotas_linux.o \
	       lib/sysquotas_xfs.o lib/sysquotas_4A.o \
	       smbd/change_trust_pw.o smbd/fake_file.o \
	       smbd/quotas.o smbd/ntquotas.o $(AFS_OBJ) smbd/msdfs.o \
	       $(AFS_SETTOKEN_OBJ) smbd/aio.o smbd/statvfs.o \
	       smbd/dmapi.o lib/launchd.o smbd/sockinit.o \
	       $(MANGLE_OBJ) @VFS_STATIC@

SMBD_OBJ_BASE = $(PARAM_WITHOUT_REG_OBJ) $(SMBD_OBJ_SRV) $(LIBSMB_OBJ) \
		$(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) \
		$(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
		$(LIB_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) \
		$(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
		$(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
		$(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(LIBADS_SERVER_OBJ) \
		$(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
		$(BUILDOPT_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)

PRINTING_OBJ = printing/pcap.o printing/print_svid.o printing/print_aix.o \
               printing/print_cups.o printing/print_generic.o \
               printing/lpq_parse.o printing/load.o \
               printing/print_iprint.o printing/print_test.o

PRINTBASE_OBJ = printing/notify.o printing/printing_db.o
PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o $(PRINTBASE_OBJ)

SMBD_OBJ = $(SMBD_OBJ_BASE) $(SMBD_OBJ_MAIN)
NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
            nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
            nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
            nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
            nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
            nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
            nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
            nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
            nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
            nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
            nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
            nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o

NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
           $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)

SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
           web/swat.o web/neg_lang.o

SWAT_OBJ = $(SWAT_OBJ1) $(PARAM_OBJ) $(PRINTING_OBJ) $(LIBSMB_OBJ) \
	   $(LOCKING_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(KRBCLIENT_OBJ) \
	   $(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
	   $(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) $(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) \
           $(PASSCHANGE_OBJ) $(LDB_OBJ)

STATUS_OBJ = utils/status.o utils/status_profile.o \
	     $(LOCKING_OBJ) $(PARAM_OBJ) \
             $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
	     $(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) \
             $(DOSERR_OBJ)

SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
	$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
	$(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) \
	$(PRINTBASE_OBJ) $(ERRORMAP_OBJ)

SMBTREE_OBJ = utils/smbtree.o $(PARAM_OBJ) \
             $(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(LIBSMB_OBJ) \
	     $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) \
             rpc_client/cli_pipe.o $(RPC_PARSE_OBJ2) \
             $(RPC_CLIENT_OBJ1) \
	     $(PASSDB_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ) $(GROUPDB_OBJ) \
	     $(LIBMSRPC_GEN_OBJ)

TESTPARM_OBJ = utils/testparm.o \
               $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
	       $(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ)

PASSWD_UTIL_OBJ = utils/passwd_util.o

SMBPASSWD_OBJ = utils/smbpasswd.o $(PASSWD_UTIL_OBJ) $(PASSCHANGE_OBJ) \
		$(PARAM_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
		$(GROUPDB_OBJ) $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
		$(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) $(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) $(LDB_OBJ)

PDBEDIT_OBJ = utils/pdbedit.o $(PASSWD_UTIL_OBJ) $(PARAM_OBJ) $(PASSDB_OBJ) \
		$(LIBSAMBA_OBJ) $(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) \
		$(SECRETS_OBJ) $(POPT_LIB_OBJ) $(SMBLDAP_OBJ) libsmb/asn1.o \
		$(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(LDB_OBJ) $(ERRORMAP_OBJ)

SMBGET_OBJ = utils/smbget.o $(POPT_LIB_OBJ) $(LIBSMBCLIENT_OBJ)

DISPLAY_SEC_OBJ= lib/display_sec.o

RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
	         rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
		 rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
		 rpcclient/cmd_dfs.o \
		 rpcclient/cmd_ds.o rpcclient/cmd_echo.o \
		 rpcclient/cmd_shutdown.o rpcclient/cmd_test.o \
		 rpcclient/cmd_unixinfo.o \
		 $(DISPLAY_SEC_OBJ)

RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
             $(PARAM_OBJ) $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) \
             $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_GEN_OBJ) $(LIBMSRPC_OBJ) \
             $(READLINE_OBJ) $(GROUPDB_OBJ) $(KRBCLIENT_OBJ) \
	     $(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ) \
	     $(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(LDB_OBJ)

PAM_WINBIND_OBJ = nsswitch/pam_winbind.o $(WBCOMMON_OBJ) \
		  $(LIBREPLACE_OBJ) $(SOCKET_WRAPPER_OBJ) @BUILD_INIPARSER@

LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
		   libsmb/libsmb_cache.o \
		   $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
	  	   $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
		   $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) \
		   $(SECRETS_OBJ) $(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ)

CAC_OBJ = $(LIBSMBCLIENT_OBJ) \
			 libmsrpc/libmsrpc.o libmsrpc/libmsrpc_internal.o \
			 libmsrpc/cac_lsarpc.o libmsrpc/cac_winreg.o libmsrpc/cac_samr.o \
			 libmsrpc/cac_svcctl.o

LIBSMBSHAREMODES_OBJ = libsmb/smb_share_modes.o $(TDB_BASE_OBJ)

# This shared library is intended for linking with unit test programs
# to test Samba internals.  It's called libbigballofmud.so to
# discourage casual usage.

LIBBIGBALLOFMUD_MAJOR = 0

LIBBIGBALLOFMUD_OBJ = $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ) \
	$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
	$(GROUPDB_OBJ) $(KRBCLIENT_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)

CLIENT_OBJ1 = client/client.o client/clitar.o rpc_client/cli_pipe.o \
	      $(RPC_CLIENT_OBJ1) \
	      $(RPC_PARSE_OBJ2)

CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) \
	     $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(LIBMSRPC_GEN_OBJ) \
             $(READLINE_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) \
             $(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ) \
	     $(DISPLAY_SEC_OBJ)

TOOL_OBJ = client/smbctool.o client/clitar.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
	     $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
             $(READLINE_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) \
	     $(DISPLAY_SEC_OBJ)

UTIL_REG_OBJ = lib/util_reg.o
UTIL_REG_API_OBJ = lib/util_reg_api.o
UTIL_REG_SMBCONF_OBJ = lib/util_reg_smbconf.o 

# objects to be used when not all of the registry code should be
# loaded but only the portion needed by reg_api, typically for
# using smbconf (registry) - full access
REG_API_OBJ = registry/reg_api.o \
	      registry/reg_frontend_hilvl.o \
	      registry/reg_smbconf.o \
	      registry/reg_db.o \
	      registry/reg_util.o \
	      \
	      registry/reg_cachehook.o \
	      registry/reg_eventlog.o \
	      registry/reg_perfcount.o \
	      registry/reg_dynamic.o \
	      \
	      lib/util_nttoken.o \
	      $(UTIL_REG_API_OBJ) \
	      $(UTIL_REG_SMBCONF_OBJ)

NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_domain.o utils/net_help.o \
	   utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
	   utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
	   utils/net_cache.o utils/net_groupmap.o utils/net_idmap.o \
	   utils/net_status.o utils/net_rpc_printer.o utils/net_rpc_rights.o \
	   utils/net_rpc_service.o utils/net_rpc_registry.o utils/net_usershare.o \
	   utils/netlookup.o utils/net_sam.o utils/net_rpc_shell.o \
	   utils/net_util.o utils/net_rpc_sh_acct.o utils/net_rpc_audit.o \
	   $(PASSWD_UTIL_OBJ) utils/net_dns.o utils/net_ads_gpo.o \
	   utils/net_conf.o auth/token_util.o

NET_OBJ = $(NET_OBJ1) $(PARAM_WITHOUT_REG_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
	  $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
	  $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(LIBADDNS_OBJ0) \
	  $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
	  $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ) \
	  $(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(SERVER_MUTEX_OBJ) \
	  $(AFS_OBJ) $(AFS_SETTOKEN_OBJ) $(REGFIO_OBJ) $(READLINE_OBJ) \
	  $(LDB_OBJ) $(LIBGPO_OBJ) @BUILD_INIPARSER@ $(DISPLAY_SEC_OBJ) \
	  $(REG_API_OBJ)

CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
	  $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(SECRETS_OBJ)

MOUNT_OBJ = client/smbmount.o \
             $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

MNT_OBJ = client/smbmnt.o $(VERSION_OBJ) $(LIBREPLACE_OBJ) $(SOCKET_WRAPPER_OBJ)

UMOUNT_OBJ = client/smbumount.o $(SOCKET_WRAPPER_OBJ)

CIFS_MOUNT_OBJ = client/mount.cifs.o

CIFS_UMOUNT_OBJ = client/umount.cifs.o

NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(LIBNMB_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) \
               $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) $(LIBSAMBA_OBJ)

SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
		torture/denytest.o torture/mangle_test.o

SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) $(PARAM_OBJ) \
	$(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

MASKTEST_OBJ = torture/masktest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
                 $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

MSGTEST_OBJ = torture/msgtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
                 $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

LOCKTEST_OBJ = torture/locktest.o $(PARAM_OBJ) $(LOCKING_OBJ) $(KRBCLIENT_OBJ) \
               $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

NSSTEST_OBJ = torture/nsstest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
                 $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

PDBTEST_OBJ = torture/pdbtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
		$(LIB_NONSMBD_OBJ) $(SECRETS_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
		$(SMBLDAP_OBJ) $(POPT_LIB_OBJ) $(LDB_OBJ)


VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)

SMBICONV_OBJ = $(PARAM_OBJ) torture/smbiconv.o $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) $(LIBSAMBA_OBJ)

LOG2PCAP_OBJ = utils/log2pcaphex.o

LOCKTEST2_OBJ = torture/locktest2.o $(PARAM_OBJ) $(LOCKING_OBJ) $(LIBSMB_OBJ) \
		$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)

SMBCACLS_OBJ = utils/smbcacls.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
			   $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
			   $(PASSDB_OBJ) $(GROUPDB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(SECRETS_OBJ) \
			   $(POPT_LIB_OBJ) $(DCUTIL_OBJ) $(LIBADS_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)

SMBCQUOTAS_OBJ = utils/smbcquotas.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
		$(PARAM_OBJ) \
		$(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
		$(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ) \
		$(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ) $(LDB_OBJ)

EVTLOGADM_OBJ0	= utils/eventlogadm.o

EVTLOGADM_OBJ	= $(EVTLOGADM_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(REGOBJS_OBJ) \
		$(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(DOSERR_OBJ) \
		$(SECRETS_OBJ) \
	        registry/reg_eventlog.o rpc_server/srv_eventlog_lib.o registry/reg_util.o \
		registry/reg_db.o

SHARESEC_OBJ0 = utils/sharesec.o
SHARESEC_OBJ  = $(SHARESEC_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(REGOBJS_OBJ) \
		$(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(DOSERR_OBJ) \
                $(POPT_LIB_OBJ) $(SECRETS_OBJ)

TALLOCTORT_OBJ = lib/talloc/testsuite.o $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
                 $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(LIBSAMBA_OBJ) $(SECRETS_OBJ)

REPLACETORT_OBJ = lib/replace/test/testsuite.o \
		lib/replace/test/os2_delete.o \
		lib/replace/test/strptime.o \
		$(LIBREPLACE_OBJ)

NDRDUMP_OBJ = librpc/tools/ndrdump.o \
			  $(PARAM_OBJ) $(LIBNDR_GEN_OBJ) \
			  $(LIBSAMBA_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
			  $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(SECRETS_OBJ)

RPCTORTURE_OBJ = torture/rpctorture.o \
             rpcclient/display.o \
             rpcclient/cmd_lsarpc.o \
             rpcclient/cmd_wkssvc.o \
             rpcclient/cmd_samr.o \
             rpcclient/cmd_srvsvc.o \
             rpcclient/cmd_netlogon.o \
             $(PARAM_OBJ) $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
             $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) $(SECRETS_OBJ)

DEBUG2HTML_OBJ = utils/debug2html.o utils/debugparse.o

SMBFILTER_OBJ = utils/smbfilter.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(SECRETS_OBJ) \
                 $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ)

PROTO_OBJ = $(SMBD_OBJ_MAIN) $(LIBNDR_OBJ) $(LIBNDR_GEN_OBJ) \
	    $(RPCCLIENT_NDR_OBJ) \
	    $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(LIBSMB_OBJ) \
	    $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
	    $(LIBMSRPC_OBJ) \
	    $(LIB_WITH_PROTO_OBJ) \
	    $(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) $(KRBCLIENT_OBJ) \
	    $(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
	    $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
	    $(PASSDB_OBJ) $(GROUPDB_OBJ) \
	    $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
	    $(AUTH_SAM_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
	    $(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) $(RPC_LSA_DS_OBJ) \
	    $(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ) \
	    $(RPC_ECHO_OBJ) $(RPC_SVCCTL_OBJ) $(RPC_EVENTLOG_OBJ) $(SMBLDAP_OBJ) \
            $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) $(RPC_UNIXINFO_OBJ) \
	    $(RPC_NTSVCS_OBJ) $(RPC_INITSHUTDOWN_OBJ) \
	    utils/passwd_util.o $(LIBGPO_OBJ) $(NSS_INFO_OBJ) \
	    $(RPC_EPMAPPER_OBJ) 

WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \
	$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) $(SECRETS_OBJ)

PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
		pam_smbpass/pam_smb_acct.o pam_smbpass/support.o
PAM_SMBPASS_OBJ = $(PAM_SMBPASS_OBJ_0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
		$(SECRETS_OBJ) $(SMBLDAP_OBJ) $(LIBSAMBA_OBJ) \
		$(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(LDB_OBJ) $(ERRORMAP_OBJ)

IDMAP_OBJ     = nsswitch/idmap.o nsswitch/idmap_cache.o nsswitch/idmap_util.o @IDMAP_STATIC@

NSS_INFO_OBJ = nsswitch/nss_info.o @NSS_INFO_STATIC@

IDMAP_NSS_OBJ = sam/idmap_nss.o @IDMAP_NSS_STATIC@

WINBINDD_OBJ1 = \
		nsswitch/winbindd.o       \
		nsswitch/winbindd_sockinit.o \
		nsswitch/winbindd_user.o  \
		nsswitch/winbindd_group.o \
		nsswitch/winbindd_util.o  \
		nsswitch/winbindd_cache.o \
		nsswitch/winbindd_pam.o   \
		nsswitch/winbindd_sid.o   \
		nsswitch/winbindd_misc.o  \
		nsswitch/winbindd_cm.o \
		nsswitch/winbindd_wins.o \
		nsswitch/winbindd_rpc.o \
		nsswitch/winbindd_reconnect.o \
		nsswitch/winbindd_ads.o \
		nsswitch/winbindd_passdb.o \
		nsswitch/winbindd_dual.o \
		nsswitch/winbindd_async.o \
		nsswitch/winbindd_creds.o \
		nsswitch/winbindd_cred_cache.o \
		nsswitch/winbindd_ccache_access.o \
		auth/token_util.o

WINBINDD_OBJ = \
		$(WINBINDD_OBJ1) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
		$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
		$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(RPC_PARSE_OBJ) \
		$(PROFILE_OBJ) $(SLCACHE_OBJ) $(SMBLDAP_OBJ) \
		$(SECRETS_OBJ) $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) \
		$(DCUTIL_OBJ) $(IDMAP_OBJ) $(NSS_INFO_OBJ) \
		$(AFS_OBJ) $(AFS_SETTOKEN_OBJ) lib/launchd.o \
		$(LIBADS_SERVER_OBJ) $(SERVER_MUTEX_OBJ) $(LDB_OBJ)

WBINFO_OBJ = nsswitch/wbinfo.o $(LIBSAMBA_OBJ) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
		$(SECRETS_OBJ) $(POPT_LIB_OBJ) $(AFS_SETTOKEN_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ)

WINBIND_NSS_OBJ = $(WBCOMMON_OBJ) $(LIBREPLACE_OBJ) $(SOCKET_WRAPPER_OBJ) @WINBIND_NSS_EXTRA_OBJS@

LDB_COMMON_OBJ=lib/ldb/common/ldb.o lib/ldb/common/ldb_ldif.o \
          lib/ldb/common/ldb_parse.o lib/ldb/common/ldb_msg.o lib/ldb/common/ldb_utf8.o \
          lib/ldb/common/ldb_debug.o lib/ldb/common/ldb_modules.o \
          lib/ldb/common/ldb_dn.o lib/ldb/common/ldb_match.o lib/ldb/common/ldb_attributes.o \
          lib/ldb/common/attrib_handlers.o lib/ldb/common/ldb_controls.o lib/ldb/common/qsort.o

LDB_TDB_OBJ=lib/ldb/ldb_tdb/ldb_tdb.o \
       lib/ldb/ldb_tdb/ldb_pack.o lib/ldb/ldb_tdb/ldb_search.o lib/ldb/ldb_tdb/ldb_index.o \
       lib/ldb/ldb_tdb/ldb_cache.o lib/ldb/ldb_tdb/ldb_tdb_wrap.o

LDB_MODULES_OBJ=lib/ldb/modules/operational.o lib/ldb/modules/rdn_name.o \
          lib/ldb/modules/objectclass.o \
          lib/ldb/modules/paged_results.o lib/ldb/modules/sort.o lib/ldb/modules/asq.o

# enabled in configure.in
LDB_LDAP_OBJ=@LDBLDAP@

LDB_OBJ = ${LDB_COMMON_OBJ} ${LDB_TDB_OBJ} ${LDB_LDAP_OBJ} ${LDB_MODULES_OBJ}

LDB_CMDLINE_OBJ = $(PARAM_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
	  $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
	  $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(LIBADDNS_OBJ0) \
	  $(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) \
	  $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ) \
	  $(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(SERVER_MUTEX_OBJ) \
	  $(AFS_OBJ) $(AFS_SETTOKEN_OBJ) $(REGFIO_OBJ) $(READLINE_OBJ) \
	  $(LDB_OBJ) lib/ldb/tools/cmdline.o


LDBEDIT_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbedit.o
LDBSEARCH_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbsearch.o
LDBADD_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbadd.o
LDBDEL_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbdel.o
LDBMODIFY_OBJ = $(LDB_CMDLINE_OBJ) lib/ldb/tools/ldbmodify.o

SMB_KRB5_LOCATOR_OBJ1 = libads/smb_krb5_locator.o
SMB_KRB5_LOCATOR_OBJ = $(SMB_KRB5_LOCATOR_OBJ1) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
		       $(LIBNMB_OBJ) $(RPC_PARSE_OBJ1) $(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(DOSERR_OBJ)

POPT_OBJ=popt/findme.o popt/popt.o popt/poptconfig.o \
          popt/popthelp.o popt/poptparse.o

INIPARSER_OBJ = iniparser_build/iniparser.o iniparser_build/dictionary.o \
		iniparser_build/strlib.o

TDBBACKUP_OBJ = lib/tdb/tools/tdbbackup.o $(LIBREPLACE_OBJ) \
	$(TDBBASE_OBJ) $(SOCKET_WRAPPER_OBJ)

TDBTOOL_OBJ = lib/tdb/tools/tdbtool.o $(TDBBASE_OBJ) $(LIBREPLACE_OBJ) \
	$(SOCKET_WRAPPER_OBJ)

TDBDUMP_OBJ = lib/tdb/tools/tdbdump.o $(TDBBASE_OBJ) $(LIBREPLACE_OBJ) \
	$(SOCKET_WRAPPER_OBJ)

TDBTORTURE_OBJ = lib/tdb/tools/tdbtorture.o $(TDBBASE_OBJ) $(LIBREPLACE_OBJ) \
	$(SOCKET_WRAPPER_OBJ)


NTLM_AUTH_OBJ1 = utils/ntlm_auth.o utils/ntlm_auth_diagnostics.o

NTLM_AUTH_OBJ = ${NTLM_AUTH_OBJ1} $(LIBSAMBA_OBJ) $(POPT_LIB_OBJ) \
		libsmb/asn1.o libsmb/spnego.o libsmb/clikrb5.o libads/kerberos.o \
		libads/kerberos_verify.o $(SECRETS_OBJ) $(SERVER_MUTEX_OBJ) \
		libads/authdata.o $(RPC_PARSE_OBJ1) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
		$(SMBLDAP_OBJ) $(DOSERR_OBJ) rpc_parse/parse_net.o $(LIBNMB_OBJ) \
		$(LDB_OBJ) $(ERRORMAP_OBJ)

######################################################################
# now the rules...
######################################################################
all : SHOWFLAGS $(SBIN_PROGS) $(BIN_PROGS) $(ROOT_SBIN_PROGS) \
	$(SHLIBS) $(MODULES) $(NSS_MODULES) $(PAM_MODULES) @EXTRA_ALL_TARGETS@

nss_modules : $(NSS_MODULES)

pam_modules : $(PAM_MODULES)

pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@

pam_winbind : SHOWFLAGS bin/pam_winbind.@SHLIBEXT@

torture : SHOWFLAGS $(TORTURE_PROGS)

smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@

masktest : SHOWFLAGS bin/masktest@EXEEXT@

msgtest : SHOWFLAGS bin/msgtest@EXEEXT@

locktest : SHOWFLAGS bin/locktest@EXEEXT@

smbcacls : SHOWFLAGS bin/smbcacls@EXEEXT@

smbcquotas : SHOWFLAGS bin/smbcquotas@EXEEXT@

smbctool: SHOWFLAGS bin/smbctool@EXEEXT@

locktest2 : SHOWFLAGS bin/locktest2@EXEEXT@

rpctorture : SHOWFLAGS bin/rpctorture@EXEEXT@

debug2html : SHOWFLAGS bin/debug2html@EXEEXT@

smbfilter : SHOWFLAGS bin/smbfilter@EXEEXT@

eventlogadm: SHOWFLAGS bin/eventlogadm@EXEEXT@

sharesec: SHOWFLAGS bin/sharesec@EXEEXT@

talloctort : SHOWFLAGS bin/talloctort@EXEEXT@

replacetort : SHOWFLAGS bin/replacetort@EXEEXT@

timelimit : SHOWFLAGS bin/timelimit@EXEEXT@

nsswitch : SHOWFLAGS bin/winbindd@EXEEXT@ bin/wbinfo@EXEEXT@ @WINBIND_NSS@ \
	@WINBIND_WINS_NSS@ bin/pam_winbind.@SHLIBEXT@

wins : SHOWFLAGS @WINBIND_WINS_NSS@

modules: SHOWFLAGS $(MODULES)

cac: SHOWFLAGS $(LIBMSRPC)


#####################################################################
## Perl IDL Compiler
IDL_FILES = unixinfo.idl lsa.idl dfs.idl echo.idl winreg.idl initshutdown.idl \
	srvsvc.idl svcctl.idl eventlog.idl wkssvc.idl netlogon.idl notify.idl \
	epmapper.idl messaging.idl

idl:
	@IDL_FILES="$(IDL_FILES)" CPP="$(CPP)" PERL="$(PERL)" \
	 srcdir="$(srcdir)" $(srcdir)/script/build_idl.sh $(PIDL_ARGS)


#####################################################################


everything: all libsmbclient debug2html smbfilter talloctort replacetort modules torture \
	$(EVERYTHING_PROGS)

.SUFFIXES:
.SUFFIXES: .c .o .lo

SHOWFLAGS:
	@echo "Using FLAGS      = $(FLAGS)"
	@echo "      PICFLAG    = $(PICFLAG)"
	@echo "      LIBS       = $(LIBS)"
	@echo "      LDFLAGS    = $(LDFLAGS)"
	@echo "      DYNEXP     = $(DYNEXP)"
	@echo "      LDSHFLAGS  = $(LDSHFLAGS)"
	@echo "      SHLIBEXT   = @SHLIBEXT@"
	@echo "      SONAMEFLAG = @SONAMEFLAG@"

MAKEDIR = || exec false; \
	  if test -d "$$dir"; then :; else \
	  echo mkdir "$$dir"; \
	  mkdir -p "$$dir" >/dev/null 2>&1 || \
	  test -d "$$dir" || \
	  mkdir "$$dir" || \
	  exec false; fi || exec false

# Run a static checker.
CHECK_CC = $(CC_CHECKER) -I. -I$(srcdir) $(FLAGS) $(PICFLAG) -c $< -o $@
# Compile a source file.
COMPILE_CC = $(CC) -I. -I$(srcdir) $(FLAGS) $(PICFLAG) -c $< -o $@
# Compile a source file with the installation paths defined.
COMPILE_CC_PATH = $(CC) -I. -I$(srcdir) $(PATH_FLAGS) $(FLAGS) $(PICFLAG) -c $< -o $@

COMPILE = $(COMPILE_CC)

# BEGIN GNU make specific
# Rewrite the COMPILE rule to generate dependencies as a side-effect.
# This is is actually toolchain-independent, but making use of the dependency
# files requires GNU make, so it's pointless to have them otherwise.
@ifGNUmake@DEPDIR=.
@ifGNUmake@COMPILE_DEPENDS = source=$< object=$@ libtool=no \
@ifGNUmake@	tmpdepfile=$(DEPDIR)/$*.TPo depfile=$(DEPDIR)/$*.d \
@ifGNUmake@	DEPDIR=$(DEPDIR) @CCDEPMODE@ \
@ifGNUmake@	$(srcdir)/depcomp $(COMPILE_CC)
@ifGNUmake@COMPILE = $(COMPILE_DEPENDS)
# END GNU make specific

.c.o:
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
	 dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
	@if test -n "$(CC_CHECKER)"; then \
	  echo "Checking  $*.c with '$(CC_CHECKER)'";\
	  $(CHECK_CC); \
	 fi
	@echo Compiling $*.c
	@$(COMPILE) && exit 0;\
		echo "The following command failed:" 1>&2;\
		echo "$(COMPILE_CC)" 1>&2;\
		$(COMPILE_CC) >/dev/null 2>&1
@BROKEN_CC@	-mv `echo $@ | sed 's%^.*/%%g'` $@

# BEGIN GNU make specific
# Include all the generated dependency files. The sort is done to
# remove duplicates.
@ifGNUmake@DEPENDS_OBJ = $(SMBD_SRV_OBJ) $(NET_OBJ) $(WINBINDD_OBJ)
@ifGNUmake@-include $(patsubst %.o, %.d, $(sort $(DEPENDS_OBJ)))
# END GNU make specific

PRECOMPILED_HEADER = $(builddir)/include/includes.h.gch

# this adds support for precompiled headers. To use it, install a snapshot
# of gcc-3.4 and run 'make pch' before you do the main build.
pch: proto_exists
	rm -f $(PRECOMPILED_HEADER)
	$(MAKE) $(PRECOMPILED_HEADER)

$(PRECOMPILED_HEADER): $(srcdir)/include/includes.h
	$(COMPILE)

BINARY_PREREQS = proto_exists bin/.dummy

# These dependencies are only approximately correct: we want to make
# sure Samba's paths are updated if ./configure is re-run.  Really it
# would be nice if "make prefix=/opt/samba all" also rebuilt things,
# but since we also require "make install prefix=/opt/samba" *not* to
# rebuild it's a bit hard.

dynconfig.o: dynconfig.c Makefile
	@echo Compiling $*.c
	@$(COMPILE_CC_PATH) && exit 0;\
		echo "The following command failed:" 1>&2;\
		echo "$(COMPILE_CC_PATH)" 1>&2;\
		$(COMPILE_CC_PATH) >/dev/null 2>&1

lib/pidfile.o: lib/pidfile.c
	@echo Compiling $*.c
	@$(COMPILE_CC_PATH) && exit 0;\
		echo "The following command failed:" 1>&2;\
		echo "$(COMPILE_CC_PATH)" 1>&2;\
		$(COMPILE_CC_PATH) >/dev/null 2>&1

lib/version.o: lib/version.c include/version.h
	@echo Compiling $*.c
	@$(COMPILE_CC_PATH) && exit 0;\
		echo "The following command failed:" 1>&2;\
		echo "$(COMPILE_CC_PATH)" 1>&2;\
		$(COMPILE_CC_PATH) >/dev/null 2>&1

smbd/build_options.o: smbd/build_options.c Makefile include/config.h include/build_env.h include/proto.h
	@echo Compiling $*.c
	@$(COMPILE_CC_PATH) && exit 0;\
		echo "The following command failed:" 1>&2;\
		echo "$(COMPILE_CC_PATH)" 1>&2;\
		$(COMPILE_CC_PATH) >/dev/null 2>&1

smbd/build_options.c: include/config.h.in script/mkbuildoptions.awk
	@echo Generating $@
	@dir=smbd $(MAKEDIR) && $(AWK) -f $(srcdir)/script/mkbuildoptions.awk > $(builddir)/smbd/build_options.c < $(srcdir)/include/config.h.in

bin/.dummy:
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
	  dir=bin $(MAKEDIR); fi
	@: >> $@ || : > $@ # what a fancy emoticon!

bin/smbd@EXEEXT@: $(BINARY_PREREQS) $(SMBD_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(LDAP_LIBS) \
		$(KRB5LIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) \
		$(ACL_LIBS) $(PASSDB_LIBS) $(LIBS) @POPTLIBS@ @SMBD_LIBS@

bin/nmbd@EXEEXT@: $(BINARY_PREREQS) $(NMBD_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS)

bin/swat@EXEEXT@: $(BINARY_PREREQS) $(SWAT_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINT_LIBS) \
	  $(AUTH_LIBS) $(LIBS) $(PASSDB_LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS)

bin/rpcclient@EXEEXT@: $(BINARY_PREREQS) $(RPCCLIENT_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(PASSDB_LIBS) $(RPCCLIENT_OBJ) \
		$(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @POPTLIBS@ \
		$(KRB5LIBS) $(LDAP_LIBS)

bin/smbclient@EXEEXT@: $(BINARY_PREREQS) $(CLIENT_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/smbctool@EXEEXT@: $(BINARY_PREREQS) $(TOOL_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(TOOL_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) -Lbin -lsmbclient

bin/net@EXEEXT@: $(BINARY_PREREQS) $(NET_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS) @INIPARSERLIBS@

bin/profiles@EXEEXT@: $(BINARY_PREREQS) $(PROFILES_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(PROFILES_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(LDAP_LIBS) @POPTLIBS@

bin/smbspool@EXEEXT@: $(BINARY_PREREQS) $(CUPS_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/smbmount@EXEEXT@: $(BINARY_PREREQS) $(MOUNT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/smbmnt@EXEEXT@: $(BINARY_PREREQS) $(MNT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(DYNEXP) $(LDFLAGS)

bin/smbumount@EXEEXT@: $(BINARY_PREREQS) $(UMOUNT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS)

bin/mount.cifs@EXEEXT@: $(BINARY_PREREQS) $(CIFS_MOUNT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(CIFS_MOUNT_OBJ) $(DYNEXP) $(LDFLAGS)

bin/umount.cifs@EXEEXT@: $(BINARY_PREREQS) $(CIFS_UMOUNT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(CIFS_UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS)

bin/testparm@EXEEXT@: $(BINARY_PREREQS) $(TESTPARM_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(LDAP_LIBS) @POPTLIBS@

bin/smbstatus@EXEEXT@: $(BINARY_PREREQS) $(STATUS_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(LDAP_LIBS) \
	@POPTLIBS@

bin/smbcontrol@EXEEXT@: $(BINARY_PREREQS) $(SMBCONTROL_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ \
	$(SMBCONTROL_OBJ) $(DYNEXP) $(LDFLAGS) \
	$(LIBS) $(LDAP_LIBS) @LIBUNWIND_PTRACE@ @POPTLIBS@

bin/smbtree@EXEEXT@: $(BINARY_PREREQS) $(SMBTREE_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/smbpasswd@EXEEXT@: $(BINARY_PREREQS) $(SMBPASSWD_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(PASSDB_LIBS) \
		$(DYNEXP) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS)

bin/pdbedit@EXEEXT@: $(BINARY_PREREQS) $(PDBEDIT_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(PASSDB_LIBS) $(LDAP_LIBS)

bin/smbget@EXEEXT@: $(BINARY_PREREQS) $(SMBGET_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBGET_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@  $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/samtest@EXEEXT@: $(SAMTEST_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SAMTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(PASSDB_LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/nmblookup@EXEEXT@: $(BINARY_PREREQS) $(NMBLOOKUP_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(LDAP_LIBS)

bin/smbtorture@EXEEXT@: $(BINARY_PREREQS) $(SMBTORTURE_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/talloctort@EXEEXT@: $(BINARY_PREREQS) $(TALLOCTORT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) \
		$(DYNEXP) $(LIBS) $(LDAP_LIBS)

bin/replacetort@EXEEXT@: $(REPLACETORT_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) @PIE_LDFLAGS@ -o $@ $(REPLACETORT_OBJ) $(LDFLAGS) \
		$(DYNEXP) $(LIBS)

bin/masktest@EXEEXT@: $(BINARY_PREREQS) $(MASKTEST_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/msgtest@EXEEXT@: $(BINARY_PREREQS) $(MSGTEST_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/smbcacls@EXEEXT@: $(BINARY_PREREQS) $(SMBCACLS_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ \
	$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/smbcquotas@EXEEXT@: $(BINARY_PREREQS) $(SMBCQUOTAS_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBCQUOTAS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ \
	$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/eventlogadm@EXEEXT@: $(BINARY_PREREQS) $(EVTLOGADM_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(EVTLOGADM_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(LDAP_LIBS) @POPTLIBS@

bin/sharesec@EXEEXT@: $(BINARY_PREREQS) $(SHARESEC_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SHARESEC_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(LDAP_LIBS) @POPTLIBS@

bin/locktest@EXEEXT@: $(BINARY_PREREQS) $(LOCKTEST_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/nsstest@EXEEXT@: $(BINARY_PREREQS) $(NSSTEST_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS)  $(LDAP_LIBS)

bin/pdbtest@EXEEXT@: $(BINARY_PREREQS) $(PDBTEST_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(PDBTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(LIBS) @POPTLIBS@

bin/vfstest@EXEEXT@: $(BINARY_PREREQS) $(VFSTEST_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) $(ACL_LIBS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) @SMBD_LIBS@ $(NSCD_LIBS)

bin/smbiconv@EXEEXT@: $(BINARY_PREREQS) $(SMBICONV_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBICONV_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) @POPTLIBS@

bin/log2pcap@EXEEXT@: $(BINARY_PREREQS) $(LOG2PCAP_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LOG2PCAP_OBJ) $(LDFLAGS) $(DYNEXP) @POPTLIBS@ $(LIBS)

bin/locktest2@EXEEXT@: $(BINARY_PREREQS) $(LOCKTEST2_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/rpctorture@EXEEXT@: $(BINARY_PREREQS) $(RPCTORTURE_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/ndrdump@EXEEXT@: $(BINARY_PREREQS) $(NDRDUMP_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NDRDUMP_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) \
		@POPTLIBS@ @LDAP_LIBS@

bin/debug2html@EXEEXT@: $(BINARY_PREREQS) $(DEBUG2HTML_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)

bin/smbfilter@EXEEXT@: $(BINARY_PREREQS) $(SMBFILTER_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)

bin/ldbedit: $(BINARY_PREREQS) $(LDBEDIT_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDBEDIT_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS)

bin/ldbsearch: $(BINARY_PREREQS) $(LDBSEARCH_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDBSEARCH_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS)

bin/ldbadd: $(BINARY_PREREQS) $(LDBADD_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDBADD_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS)

bin/ldbmodify: $(BINARY_PREREQS) $(LDBMODIFY_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDBMODIFY_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS)

bin/ldbdel: $(BINARY_PREREQS) $(LDBDEL_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDBDEL_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS) $(UUID_LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS) $(NSCD_LIBS)

bin/libaddns.@SHLIBEXT@: $(BINARY_PREREQS) $(LIBADDNS_OBJ)
	@echo Linking libaddns shared library $@
	@$(SHLD_DSO) $(LIBADDNS_OBJ) $(LDFLAGS) $(LIBS) \
		$(KRB5LIBS) $(UUID_LIBS)\
		@SONAMEFLAG@`basename $@`.$(SONAME_VER)

bin/libaddns.a: $(BINARY_PREREQS) $(LIBADDNS_OBJ)
	@echo Linking libaddns non-shared library $@
	@-$(AR) -rc $@ $(LIBADDNS_OBJ)

bin/libsmbclient.@SHLIBEXT@: $(BINARY_PREREQS) $(LIBSMBCLIENT_OBJ)
	@echo Linking libsmbclient shared library $@
	@$(SHLD_DSO) $(LIBSMBCLIENT_OBJ) $(LDFLAGS) $(LIBS) \
		$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS) \
		@SONAMEFLAG@`basename $@`.$(SONAME_VER)

bin/libsmbclient.a: $(BINARY_PREREQS) $(LIBSMBCLIENT_OBJ)
	@echo Linking libsmbclient non-shared library $@
	@-$(AR) -rc $@ $(LIBSMBCLIENT_OBJ)

bin/libsmbsharemodes.@SHLIBEXT@: $(BINARY_PREREQS) $(LIBSMBSHAREMODES_OBJ)
	@echo Linking libsmbsharemodes shared library $@
	@$(SHLD_DSO) $(LIBSMBSHAREMODES_OBJ) $(LDFLAGS) $(LIBS) \
		$(KRB5LIBS) $(LDAP_LIBS) \
		@SONAMEFLAG@`basename $@`.$(SONAME_VER)

bin/libsmbsharemodes.a: $(BINARY_PREREQS) $(LIBSMBSHAREMODES_OBJ)
	@echo Linking libsmbsharemodes non-shared library $@
	@-$(AR) -rc $@ $(LIBSMBSHAREMODES_OBJ)

bin/libmsrpc.@SHLIBEXT@: $(BINARY_PREREQS) $(CAC_OBJ)
	@echo Linking libmsrpc shared library $@
	@$(SHLD_DSO) $(CAC_OBJ) $(LDFLAGS) $(LIBS) \
		@SONAMEFLAG@`basename $@`.$(SONAME_VER)

bin/libmsrpc.a: $(BINARY_PREREQS) $(CAC_OBJ)
	@echo Linking libmsrpc non-shared library $@
	@-$(AR) -rc $@ $(CAC_OBJ)

# This is probably wrong for anything other than the GNU linker.
bin/libbigballofmud.@SHLIBEXT@: $(BINARY_PREREQS) $(LIBBIGBALLOFMUD_OBJ)
	@echo Linking bigballofmud shared library $@
	@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_OBJ) $(LIBS) \
		$(PASSDB_LIBS) $(IDMAP_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
		@SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
	ln -snf libbigballofmud.so bin/libbigballofmud.so.0

# It would be nice to build a static bigballofmud too, but when I try
# I get linker errors about dl_open and similar things.  I'm not sure if
# it can be fixed or if they just can't be called from a static
# library.

libsmbclient: $(LIBSMBCLIENT)
libsmbsharemodes: $(LIBSMBSHAREMODES)
libmsrpc: $(LIBMSRPC)
libaddns: $(LIBADDNS)

# Linker command to link a RPC, VFS, AUTH, CHARSET or PASSDB module.
SHLD_MODULE = $(SHLD) $(LDSHFLAGS) $(MODULE_EXPORTS) \
	      -o $@ @SONAMEFLAG@`basename $@`

bin/librpc_lsarpc.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_LSA_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_LSA_OBJ)

bin/librpc_samr.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SAMR_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_SAMR_OBJ)

bin/librpc_unixinfo.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_UNIXINFO_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_UNIXINFO_OBJ)

bin/librpc_epmapper.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_EPMAPPER_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_SVC_OBJ)

bin/librpc_srvsvc.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SVC_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_SVC_OBJ)

bin/librpc_svcctl.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SVCCTL_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_SVCCTL_OBJ)

bin/librpc_ntsvcs.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_NTSVCS_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_NTSVCS_OBJ)

bin/librpc_wkssvc.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_WKS_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_WKS_OBJ)

bin/librpc_NETLOGON.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_NETLOG_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_NETLOG_OBJ)

bin/librpc_winreg.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_REG_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_REG_OBJ)

bin/librpc_initshutdown.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_INITSHUTDOWN_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_INITSHUTDOWN_OBJ)

bin/librpc_lsa_ds.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_LSA_DS_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_LSA_DS_OBJ)

bin/librpc_spoolss.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_SPOOLSS_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_SPOOLSS_OBJ)

bin/librpc_eventlog.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_EVENTLOG_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_EVENTLOG_OBJ)

bin/librpc_netdfs.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_DFS_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_DFS_OBJ)

bin/librpc_echo.@SHLIBEXT@: $(BINARY_PREREQS) $(RPC_ECHO_OBJ)
	@echo "Linking $@"
	@$(SHLD_MODULE) $(RPC_ECHO_OBJ)

bin/winbindd@EXEEXT@: $(BINARY_PREREQS) $(WINBINDD_OBJ) @BUILD_POPT@
	@echo "Linking $@"
	@$(CC) $(FLAGS) -o $@ $(WINBINDD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
		@POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) $(PASSDB_LIBS)

@WINBIND_NSS@: $(BINARY_PREREQS) $(WINBIND_NSS_OBJ)
	@echo "Linking $@"
	@$(SHLD) $(WINBIND_NSS_LDSHFLAGS) -o $@ $(WINBIND_NSS_OBJ) \
		@WINBIND_NSS_EXTRA_LIBS@ @SONAMEFLAG@`basename $@`@NSSSONAMEVERSIONSUFFIX@

@WINBIND_WINS_NSS@: $(BINARY_PREREQS) $(WINBIND_WINS_NSS_OBJ)
	@echo "Linking $@"
	@$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_WINS_NSS_OBJ) \
		$(LDAP_LIBS) $(KRB5LIBS) $(LIBS) \
		@SONAMEFLAG@`basename $@`@NSSSONAMEVERSIONSUFFIX@

@SMB_KRB5_LOCATOR@: $(BINARY_PREREQS) $(SMB_KRB5_LOCATOR_OBJ)
	@echo "Linking $@"
	@$(SHLD) $(LDSHFLAGS) -o $@ $(SMB_KRB5_LOCATOR_OBJ) \
		$(LDAP_LIBS) $(LIBS) -lcom_err \
		@SONAMEFLAG@`basename $@`

bin/pam_winbind.@SHLIBEXT@: $(BINARY_PREREQS) $(PAM_WINBIND_OBJ)
	@echo "Linking shared library $@"
	@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) -lpam @INIPARSERLIBS@ \
		@SONAMEFLAG@`basename $@`

bin/builtin.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_BUILTIN_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_BUILTIN_OBJ)

bin/domain.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_DOMAIN_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_DOMAIN_OBJ)

bin/script.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SCRIPT_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_SCRIPT_OBJ)

bin/smbserver.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SERVER_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_SERVER_OBJ)

bin/winbind.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_WINBIND_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_WINBIND_OBJ)

bin/unix.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_UNIX_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_UNIX_OBJ)

bin/sam.@SHLIBEXT@: $(BINARY_PREREQS) $(AUTH_SAM_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(AUTH_SAM_OBJ)

bin/ldapsam.@SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_ldap.o passdb/pdb_nds.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) passdb/pdb_ldap.o passdb/pdb_nds.o $(LDAP_LIBS)

bin/tdbsam.@SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_tdb.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) passdb/pdb_tdb.o

bin/smbpasswd.@SHLIBEXT@: $(BINARY_PREREQS) passdb/pdb_smbpasswd.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) passdb/pdb_smbpasswd.o

bin/rid.@SHLIBEXT@: $(BINARY_PREREQS) nsswitch/idmap_rid.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) nsswitch/idmap_rid.o

bin/ad.@SHLIBEXT@: $(BINARY_PREREQS) nsswitch/idmap_ad.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) nsswitch/idmap_ad.o

bin/ldap.@SHLIBEXT@: $(BINARY_PREREQS) nsswitch/idmap_ldap.o
	@echo "Building plugin $@"
	@$(SHLD_MODULE) nsswitch/idmap_ldap.o

bin/weird.@SHLIBEXT@: $(BINARY_PREREQS) $(DEVEL_HELP_WEIRD_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(DEVEL_HELP_WEIRD_OBJ)

bin/CP850.@SHLIBEXT@: $(BINARY_PREREQS) $(CP850_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(CP850_OBJ)

bin/CP437.@SHLIBEXT@: $(BINARY_PREREQS) $(CP437_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(CP437_OBJ)

bin/macosxfs.@SHLIBEXT@: $(BINARY_PREREQS) $(CHARSET_MACOSXFS_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(CHARSET_MACOSXFS_OBJ) -framework CoreFoundation

# NOTE, there is no build rule for a dynamic default VFS module because
# this one MUST MUST MUST be built statically.

bin/audit.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AUDIT_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_AUDIT_OBJ)

bin/extd_audit.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_EXTD_AUDIT_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_EXTD_AUDIT_OBJ)

bin/full_audit.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FULL_AUDIT_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_FULL_AUDIT_OBJ)

bin/recycle.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_RECYCLE_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_RECYCLE_OBJ)

bin/netatalk.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_NETATALK_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_NETATALK_OBJ)

bin/fake_perms.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FAKE_PERMS_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_FAKE_PERMS_OBJ)

bin/default_quota.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_DEFAULT_QUOTA_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_DEFAULT_QUOTA_OBJ)

bin/readonly.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_READONLY_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_READONLY_OBJ)

bin/shadow_copy.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SHADOW_COPY_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_SHADOW_COPY_OBJ)

bin/cap.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CAP_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_CAP_OBJ)

bin/expand_msdfs.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_EXPAND_MSDFS_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_EXPAND_MSDFS_OBJ)

bin/afsacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AFSACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_AFSACL_OBJ)

bin/posixacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_POSIXACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_POSIXACL_OBJ)

bin/aixacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AIXACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_AIXACL_OBJ)

bin/aixacl2.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_AIXACL2_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_AIXACL2_OBJ)

bin/solarisacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_SOLARISACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_SOLARISACL_OBJ)

bin/zfsacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_ZFSACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_ZFSACL_OBJ)

bin/irixacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_IRIXACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_IRIXACL_OBJ)

bin/hpuxacl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_HPUXACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_HPUXACL_OBJ)

bin/tru64acl.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_TRU64ACL_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_TRU64ACL_OBJ)

bin/catia.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CATIA_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_CATIA_OBJ)

bin/cacheprime.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_CACHEPRIME_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_CACHEPRIME_OBJ)

bin/prealloc.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_PREALLOC_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_PREALLOC_OBJ)

bin/commit.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_COMMIT_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_COMMIT_OBJ)

bin/gpfs.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_GPFS_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_GPFS_OBJ)

bin/notify_fam.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_NOTIFY_FAM_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_NOTIFY_FAM_OBJ) @SMB_FAM_LIBS@

bin/readahead.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_READAHEAD_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_READAHEAD_OBJ)

bin/fileid.@SHLIBEXT@: $(BINARY_PREREQS) $(VFS_FILEID_OBJ)
	@echo "Building plugin $@"
	@$(SHLD_MODULE) $(VFS_FILEID_OBJ)

#########################################################
## IdMap NSS plugins

## None here right now
#########################################################

bin/wbinfo@EXEEXT@: $(BINARY_PREREQS) $(WBINFO_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(WBINFO_OBJ) $(DYNEXP) $(LIBS) $(LDAP_LIBS) @POPTLIBS@

bin/ntlm_auth@EXEEXT@: $(BINARY_PREREQS) $(NTLM_AUTH_OBJ) $(PARAM_OBJ) \
	$(LIB_NONSMBD_OBJ) @BUILD_POPT@
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(NTLM_AUTH_OBJ) \
		$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(LIBS) \
		@POPTLIBS@ $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)

bin/pam_smbpass.@SHLIBEXT@: $(BINARY_PREREQS) $(PAM_SMBPASS_OBJ)
	@echo "Linking shared library $@"
	@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_OBJ) -lpam $(DYNEXP) $(LIBS) $(LDAP_LIBS) $(KRB5LIBS) $(NSCD_LIBS)

bin/tdbbackup@EXEEXT@: $(BINARY_PREREQS) $(TDBBACKUP_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBBACKUP_OBJ)

bin/tdbtool@EXEEXT@: $(BINARY_PREREQS) $(TDBTOOL_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBTOOL_OBJ)

bin/tdbdump@EXEEXT@: $(BINARY_PREREQS) $(TDBDUMP_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBDUMP_OBJ)

bin/tdbtorture@EXEEXT@: $(BINARY_PREREQS) $(TDBTORTURE_OBJ)
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBTORTURE_OBJ)

bin/t_strcmp@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_strcmp.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strcmp.o -L ./bin -lbigballofmud

bin/t_strstr@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_strstr.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strstr.o -L ./bin -lbigballofmud

bin/t_strappend@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_strappend.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strappend.o -L ./bin -lbigballofmud

bin/t_stringoverflow@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_stringoverflow.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) torture/t_stringoverflow.o -L./bin -lbigballofmud

bin/t_doschar@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_doschar.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_doschar.o -L ./bin -lbigballofmud
bin/t_push_ucs2@EXEEXT@: $(BINARY_PREREQS) bin/libbigballofmud.@SHLIBEXT@ torture/t_push_ucs2.o
	$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_push_ucs2.o -L ./bin -lbigballofmud

bin/timelimit@EXEEXT@: script/tests/timelimit.o
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(DYNEXP) script/tests/timelimit.o

install: installservers installbin @INSTALL_CIFSMOUNT@ installman installscripts installdat installmodules @SWAT_INSTALL_TARGETS@ @INSTALL_LIBSMBCLIENT@ @INSTALL_LIBMSRPC@ @INSTALL_PAM_MODULES@ @INSTALL_LIBSMBSHAREMODES@


install-everything: install installmodules

# DESTDIR is used here to prevent packagers wasting their time
# duplicating the Makefile. Remove it and you will have the privelege
# of package each samba release for muliple versions of multiple
# distributions and operating systems, or at least supplying patches
# to all the packaging files required for this, prior to committing
# the removal of DESTDIR. Do not remove it even though you think it
# is not used

installdirs:
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(PRIVATEDIR) $(PIDDIR) $(LOCKDIR) $(MANDIR)

installservers: all installdirs
	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)

installbin: all installdirs
	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)

installcifsmount: @CIFSMOUNT_PROGS@
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(ROOTSBINDIR)
	@$(SHELL) script/installbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSMOUNT_PROGS@

# Some symlinks are required for the 'probing' of modules.
# This mechanism should go at some point..
installmodules: modules installdirs
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(NSSINFOLIBDIR) $(NSS_INFO_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam.@SHLIBEXT@ NDS_ldapsam.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam.@SHLIBEXT@ NDS_ldapsam_compat.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam.@SHLIBEXT@ ldapsam_compat.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) rhosts.@SHLIBEXT@ hostsequiv.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) sam.@SHLIBEXT@ sam_ignoredomain.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) domain.@SHLIBEXT@ trustdomain.@SHLIBEXT@ ntdomain.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) builtin.@SHLIBEXT@ guest.@SHLIBEXT@ fixed_challenge.@SHLIBEXT@ name_to_ntstatus.@SHLIBEXT@
	@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(NSSINFOLIBDIR) ../idmap/ad.@SHLIBEXT@ rfc2307.@SHLIBEXT@ sfu.@SHLIBEXT@ sfu20.@SHLIBEXT@

installscripts: installdirs
	@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS_BIN) $(DESTDIR)$(BINDIR) $(SCRIPTS)

installdat: installdirs
	@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(LIBDIR) $(srcdir)

installmsg: installdirs
	@$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)

installswat: installdirs installmsg
	@$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)

installclientlib: installdirs libsmbclient
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
	-$(INSTALLLIBCMD_SH) bin/libsmbclient.@SHLIBEXT@ $(DESTDIR)$(LIBDIR)
	-$(INSTALLLIBCMD_A) bin/libsmbclient.a $(DESTDIR)$(LIBDIR)
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/include/libsmbclient.h $(DESTDIR)${prefix}/include

installlibmsrpc: installdirs libmsrpc
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
	-$(INSTALLLIBCMD_SH) bin/libmsrpc.@SHLIBEXT@ $(DESTDIR)$(LIBDIR)
	-$(INSTALLLIBCMD_A) bin/libmsrpc.a $(DESTDIR)$(LIBDIR)
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) ${prefix}/include
	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/include/libmsrpc.h $(DESTDIR)${prefix}/include

installlibsmbsharemodes: installdirs libsmbsharemodes
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
	-$(INSTALLLIBCMD_SH) bin/libsmbsharemodes.@SHLIBEXT@ $(DESTDIR)$(LIBDIR)
	-$(INSTALLLIBCMD_A) bin/libsmbsharemodes.a $(DESTDIR)$(LIBDIR)
	-$(INSTALLCMD) -m $(INSTALLPERMS_DATA) $(srcdir)/include/smb_share_modes.h $(DESTDIR)${prefix}/include

installlibaddns: installdirs libaddns
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(LIBDIR)
	-$(INSTALLLIBCMD_SH) bin/libaddns.@SHLIBEXT@ $(DESTDIR)$(LIBDIR)
	-$(INSTALLLIBCMD_A) bin/libaddns.a $(DESTDIR)$(LIBDIR)

installpammodules: $(PAM_MODULES)
	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(PAMMODULESDIR)
	@for module in $(PAM_MODULES); do \
		echo "Installing module $${module} as $(DESTDIR)/$(PAMMODULESDIR)/$${module}.@SHLIBEXT@ "; \
		$(INSTALLCMD) -m $(INSTALLPERMS_BIN) bin/$${module}.@SHLIBEXT@ \
			"$(DESTDIR)/$(PAMMODULESDIR)"; \
	done

# Python extensions

PYTHON_OBJ = $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) \
	$(LIBMSRPC_OBJ) $(LIBMSRPC_GEN_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
	$(SECRETS_OBJ) $(KRBCLIENT_OBJ) $(SMBLDAP_OBJ) $(LDB_OBJ)

python_ext: $(PYTHON_OBJ)
	@if test -z "$(PYTHON)"; then \
		echo Use the option --with-python to configure python; \
		exit 1; \
	fi
	PYTHON_OBJS="$(PYTHON_OBJ)" \
	PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
	LIBS="$(LDFLAGS) $(LIBS) $(PASSDB_LIBS) $(IDMAP_LIBS) $(KRB5LIBS) $(LDAP_LIBS)" \
		$(PYTHON) python/setup.py build

python_install: $(PYTHON_OBJ)
	@if test -z "$(PYTHON)"; then \
		echo Use the option --with-python to configure python; \
		exit 1; \
	fi
	PYTHON_OBJS="$(PYTHON_OBJ)" \
	PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
	LIBS="$(LDFLAGS) $(LIBS)" \
		$(PYTHON) python/setup.py install --root=$(DESTDIR)

python_clean:
	@-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
	@-rm -rf build/

# revert to the previously installed version
revert:
	@$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
	@$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)

installman: installdirs
	@SMBMOUNT_PROGS="@SMBMOUNT_PROGS@" $(SHELL) \
		$(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) C "@ROFF@"

.PHONY: showlayout

showlayout:
	@echo "Samba will be installed into:"
	@echo "  prefix:      $(prefix)"
	@echo "  bindir:      $(BINDIR)"
	@echo "  sbindir:     $(SBINDIR)"
	@echo "  libdir:      $(LIBDIR)"
	@echo "  vardir:      $(VARDIR)"
	@echo "  mandir:      $(MANDIR)"
	@echo "  privatedir:  $(PRIVATE_DIR)"
	@echo "  configdir:   $(CONFIGDIR)"
	@echo "  lockdir:     $(LOCKDIR)"
	@echo "  piddir:      $(PIDDIR)"
	@echo "  swatdir:     $(SWATDIR)"


uninstall: uninstallman uninstallservers uninstallbin @UNINSTALL_CIFSMOUNT@ uninstallscripts uninstalldat uninstallswat uninstallmodules @UNINSTALL_LIBSMBCLIENT@ @UNINSTALL_LIBMSRPC@ @UNINSTALL_PAM_MODULES@ @UNINSTALL_LIBSMBSHAREMODES@

uninstallman:
	@$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) C

uninstallservers:
	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)

uninstallbin:
	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)

uninstallcifsmount:
	@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(ROOTSBINDIR) @CIFSMOUNT_PROGS@

uninstallmodules:
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS_BIN) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)

uninstallscripts:
	@$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS_BIN) $(DESTDIR)$(BINDIR) $(SCRIPTS)

uninstalldat:
	@$(SHELL) $(srcdir)/script/uninstalldat.sh $(DESTDIR) $(LIBDIR) $(srcdir)

uninstallmsg:
	@$(SHELL) $(srcdir)/script/uninstallmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)

uninstallswat: uninstallmsg
	@$(SHELL) $(srcdir)/script/uninstallswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)

uninstallclientlib:
	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libsmbclient.@SHLIBEXT@
	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libsmbclient.a
	-rm -f $(DESTDIR)${prefix}/include/libsmbclient.h

uninstalllibmsrpc:
	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libmsrpc.@SHLIBEXT@
	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libmsrpc.a
	-rm -f $(DESTDIR)${prefix}/include/libmsrpc.h

uninstalllibsmbsharemodes:
	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libsmbsharemodes.@SHLIBEXT@
	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libsmbsharemodes.a

uninstalllibaddns:
	-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libaddns.@SHLIBEXT@
	-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libaddns.a

uninstallpammodules:
	@for module in $(PAM_MODULES); do \
		echo "Removing $(DESTDIR)/$(PAMMODULESDIR)/$${module}.@SHLIBEXT@ "; \
		rm -f "$(DESTDIR)/$(PAMMODULESDIR)/$${module}.@SHLIBEXT@"; \
	done

# Toplevel clean files
TOPFILES=dynconfig.o

clean: delheaders python_clean
	-rm -f $(PRECOMPILED_HEADER)
	-rm -f core */*~ *~ \
		*/*.o */*/*.o */*/*/*.o \
	        */*.d */*/*.d */*/*/*.d \
		*/*.@SHLIBEXT@ */*/*.@SHLIBEXT@ */*/*/*.@SHLIBEXT@ \
		$(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(ROOT_SBIN_PROGS) \
		$(MODULES) $(TORTURE_PROGS) $(LIBSMBCLIENT) $(LIBADDNS) \
		$(LIBSMBSHAREMODES) $(EVERYTHING_PROGS) $(LIBMSRPC) \
		.headers.stamp */src/*.o proto_exists
	-rm -rf t_dir

# Making this target will just make sure that the prototype files
# exist, not necessarily that they are up to date.  Since they're
# removed by "make clean" this will always be run when you do anything
# afterwards.
proto_exists: include/proto.h include/build_env.h \
	nsswitch/winbindd_proto.h web/swat_proto.h \
	client/client_proto.h utils/net_proto.h utils/ntlm_auth_proto.h smbd/build_options.c
	@touch proto_exists

delheaders:
	@echo Removing prototype headers
	@rm -f include/proto.h include/build_env.h \
		nsswitch/winbindd_proto.h web/swat_proto.h \
		client/client_proto.h utils/net_proto.h \
		smbd/build_options.c utils/ntlm_auth_proto.h \
		utils/passwd_proto.h

MKPROTO_SH = $(srcdir)/script/mkproto.sh

include/proto.h: smbd/build_options.c
	@echo Building include/proto.h
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _PROTO_H_ $(builddir)/include/proto.h \
	  $(PROTO_OBJ)

include/build_env.h: script/build_env.sh
	@echo Building include/build_env.h
	@$(SHELL) $(srcdir)/script/build_env.sh $(srcdir) $(builddir) $(CC) \
	  > $(builddir)/include/build_env.h

nsswitch/winbindd_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _WINBINDD_PROTO_H_ $(builddir)/nsswitch/winbindd_proto.h \
	  $(WINBINDD_OBJ1)

web/swat_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _SWAT_PROTO_H_ $(builddir)/web/swat_proto.h \
	  $(SWAT_OBJ1)

client/client_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _CLIENT_PROTO_H_ $(builddir)/client/client_proto.h \
	  $(CLIENT_OBJ1)

utils/net_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _NET_PROTO_H_ $(builddir)/utils/net_proto.h \
	  $(NET_OBJ1)

utils/passwd_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _PASSWD_PROTO_H_ $(builddir)/utils/passwd_proto.h \
	  $(PASSWD_UTIL_OBJ)

utils/ntlm_auth_proto.h:
	@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
	  -h _NTLM_AUTH_PROTO_H_ $(builddir)/utils/ntlm_auth_proto.h \
	  $(NTLM_AUTH_OBJ1)

# "make headers" or "make proto" calls a subshell because we need to
# make sure these commands are executed in sequence even for a
# parallel make.
headers:
	$(MAKE) delheaders; \
	$(MAKE) smbd/build_options.c; \
	$(MAKE) include/proto.h; \
	$(MAKE) include/build_env.h; \
	$(MAKE) nsswitch/winbindd_proto.h; \
	$(MAKE) web/swat_proto.h; \
	$(MAKE) client/client_proto.h; \
	$(MAKE) utils/ntlm_auth_proto.h; \
	$(MAKE) utils/net_proto.h; \
	$(MAKE) utils/passwd_proto.h;

proto: headers

.PHONY: headers proto

etags:
	etags `find $(srcdir) -name "*.[ch]" | grep -v /.svn/`

ctags:
	ctags `find $(srcdir) -name "*.[ch]" | grep -v /.svn/`

realclean: clean delheaders
	-rm -f config.log bin/.dummy script/findsmb script/gen-8bit-gap.sh
	-rm -f script/installbin.sh script/uninstallbin.sh

distclean: realclean
	-rm -f smbadduser
	-rm -f include/config.h Makefile
	-rm -f config.status config.cache so_locations
	-rm -rf .deps TAGS

realdistclean: distclean
	-rm -f include/config.h.in
	-rm -f include/version.h
	-rm -f configure

# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
# dead (ie. unused) functions in the code. (tridge)
finddead:
	nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
	nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
	comm -13 nmused.txt nmfns.txt


# when configure.in is updated, reconfigure
$(srcdir)/configure: $(srcdir)/configure.in
	@echo "WARNING: you need to rerun ./autogen.sh"

config.status: $(srcdir)/configure
	@echo "WARNING: you need to run ./configure"

Makefile: $(srcdir)/Makefile.in config.status
	@echo "WARNING: you need to run ./config.status"

######################################################################
# Samba Testing Framework

# Check for NSS module problems.
test_nss_modules: nss_modules
	@echo "Testing $(NSS_MODULES) "
	@for module in $(NSS_MODULES); do \
		./script/tests/dlopen.sh $${module} \
			|| exit 1; \
	done

# Check for PAM module problems.  Specifically, check that every module we
# built can actually be loaded by a minimal PAM-aware application.
test_pam_modules: pam_modules
	@echo "Testing $(PAM_MODULES) "
	@for module in $(PAM_MODULES); do \
		./script/tests/dlopen.sh -lpam -ldl bin/$${module}.@SHLIBEXT@ \
			|| exit 1; \
	done

##
## Targets for 'make test'
##
test: all torture timelimit
	@echo Running Test suite
	@sh $(srcdir)/script/tests/selftest.sh ${selftest_prefix}/st all "${smbtorture4_path}"

valgrindtest: all torture timelimit
	@echo Running Test suite with valgrind
	@NMBD_VALGRIND="xterm -n smbd -e valgrind -q --db-attach=yes --num-callers=30" \
	 SMBD_VALGRIND="xterm -n smbd -e valgrind -q --db-attach=yes --num-callers=30" \
	 VALGRIND="valgrind -q --num-callers=30 --log-file=${selftest_prefix}/st/valgrind.log" \
	 $(srcdir)/script/tests/selftest.sh ${selftest_prefix}/st all "${smbtorture4_path}"