/* Unix SMB/CIFS implementation. SMB parameters and setup, plus a whole lot more. Copyright (C) Andrew Tridgell 1992-2000 Copyright (C) John H Terpstra 1996-2002 Copyright (C) Luke Kenneth Casson Leighton 1996-2000 Copyright (C) Paul Ashton 1998-2000 Copyright (C) Simo Sorce 2001-2002 Copyright (C) Martin Pool 2002 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _SMB_H #define _SMB_H #if defined(LARGE_SMB_OFF_T) #define BUFFER_SIZE (128*1024) #else /* no large readwrite possible */ #define BUFFER_SIZE (0xFFFF) #endif #define SAFETY_MARGIN 1024 #define LARGE_WRITEX_HDR_SIZE 65 #define NMB_PORT 137 #define DGRAM_PORT 138 #define SMB_PORT1 445 #define SMB_PORT2 139 #define SMB_PORTS "445 139" #define False (0) #define True (1) #define Auto (2) #ifndef _BOOL typedef int BOOL; #define _BOOL /* So we don't typedef BOOL again in vfs.h */ #endif /* limiting size of ipc replies */ #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024)) #define SIZEOFWORD 2 #ifndef DEF_CREATE_MASK #define DEF_CREATE_MASK (0755) #endif /* string manipulation flags - see clistr.c and srvstr.c */ #define STR_TERMINATE 1 #define STR_UPPER 2 #define STR_ASCII 4 #define STR_UNICODE 8 #define STR_NOALIGN 16 /* how long to wait for secondary SMB packets (milli-seconds) */ #define SMB_SECONDARY_WAIT (60*1000) /* Debugging stuff */ #include "debug.h" /* this defines the error codes that receive_smb can put in smb_read_error */ #define READ_TIMEOUT 1 #define READ_EOF 2 #define READ_ERROR 3 #define DIR_STRUCT_SIZE 43 /* these define the attribute byte as seen by DOS */ #define aRONLY (1L<<0) /* 0x01 */ #define aHIDDEN (1L<<1) /* 0x02 */ #define aSYSTEM (1L<<2) /* 0x04 */ #define aVOLID (1L<<3) /* 0x08 */ #define aDIR (1L<<4) /* 0x10 */ #define aARCH (1L<<5) /* 0x20 */ /* deny modes */ #define DENY_DOS 0 #define DENY_ALL 1 #define DENY_WRITE 2 #define DENY_READ 3 #define DENY_NONE 4 #define DENY_FCB 7 /* open modes */ #define DOS_OPEN_RDONLY 0 #define DOS_OPEN_WRONLY 1 #define DOS_OPEN_RDWR 2 #define DOS_OPEN_FCB 0xF /* define shifts and masks for share and open modes. */ #define OPEN_MODE_MASK 0xF #define SHARE_MODE_SHIFT 4 #define SHARE_MODE_MASK 0x7 #define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK) #define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK) #define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK) #define SET_DENY_MODE(x) (((x) & SHARE_MODE_MASK) <<SHARE_MODE_SHIFT) /* Sync on open file (not sure if used anymore... ?) */ #define FILE_SYNC_OPENMODE (1<<14) #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False) /* allow delete on open file mode (used by NT SMB's). */ #define ALLOW_SHARE_DELETE (1<<15) #define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False) #define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0) /* delete on close flag (used by NT SMB's). */ #define DELETE_ON_CLOSE_FLAG (1<<16) #define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False) #define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0) /* open disposition values */ #define FILE_EXISTS_FAIL 0 #define FILE_EXISTS_OPEN 1 #define FILE_EXISTS_TRUNCATE 2 /* mask for open disposition. */ #define FILE_OPEN_MASK 0x3 #define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK) #define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK) /* The above can be OR'ed with... */ #define FILE_CREATE_IF_NOT_EXIST 0x10 #define FILE_FAIL_IF_NOT_EXIST 0 #define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST)) /* share types */ #define STYPE_DISKTREE 0 /* Disk drive */ #define STYPE_PRINTQ 1 /* Spooler queue */ #define STYPE_DEVICE 2 /* Serial device */ #define STYPE_IPC 3 /* Interprocess communication (IPC) */ #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */ #include "doserr.h" /* * SMB UCS2 (16-bit unicode) internal type. */ typedef uint16 smb_ucs2_t; /* ucs2 string types. */ typedef smb_ucs2_t wpstring[PSTRING_LEN]; typedef smb_ucs2_t wfstring[FSTRING_LEN]; /* This error code can go into the client smb_rw_error. */ #define WRITE_ERROR 4 #ifdef WORDS_BIGENDIAN #define UCS2_SHIFT 8 #else #define UCS2_SHIFT 0 #endif /* turn a 7 bit character into a ucs2 character */ #define UCS2_CHAR(c) ((c) << UCS2_SHIFT) /* pipe string names */ #define PIPE_LANMAN "\\PIPE\\LANMAN" #define PIPE_SRVSVC "\\PIPE\\srvsvc" #define PIPE_SAMR "\\PIPE\\samr" #define PIPE_WINREG "\\PIPE\\winreg" #define PIPE_WKSSVC "\\PIPE\\wkssvc" #define PIPE_NETLOGON "\\PIPE\\NETLOGON" #define PIPE_NTLSA "\\PIPE\\ntlsa" #define PIPE_NTSVCS "\\PIPE\\ntsvcs" #define PIPE_LSASS "\\PIPE\\lsass" #define PIPE_LSARPC "\\PIPE\\lsarpc" #define PIPE_SPOOLSS "\\PIPE\\spoolss" #define PIPE_NETDFS "\\PIPE\\netdfs" #define PIPE_ECHO "\\PIPE\\rpcecho" #define PIPE_NETLOGON_PLAIN "\\NETLOGON" #define PI_LSARPC 0 #define PI_LSARPC_DS 1 #define PI_SAMR 2 #define PI_NETLOGON 3 #define PI_SRVSVC 4 #define PI_WKSSVC 5 #define PI_WINREG 6 #define PI_SPOOLSS 7 #define PI_NETDFS 8 #define PI_ECHO 9 #define PI_MAX_PIPES 10 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */ typedef struct nttime_info { uint32 low; uint32 high; } NTTIME; /* Allowable account control bits */ #define ACB_DISABLED 0x0001 /* 1 = User account disabled */ #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */ #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */ #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */ #define ACB_NORMAL 0x0010 /* 1 = Normal user account */ #define ACB_MNS 0x0020 /* 1 = MNS logon user account */ #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */ #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */ #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */ #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */ #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */ #define MAX_HOURS_LEN 32 /* * window during which we must talk to the PDC to avoid * sam sync delays; expressed in seconds (15 minutes is the * default period for SAM replication under Windows NT 4.0 */ #define SAM_SYNC_WINDOW 900 #ifndef MAXSUBAUTHS #define MAXSUBAUTHS 15 /* max sub authorities in a SID */ #endif /* SID Types */ enum SID_NAME_USE { SID_NAME_USER = 1, /* user */ SID_NAME_DOM_GRP, /* domain group */ SID_NAME_DOMAIN, /* domain sid */ SID_NAME_ALIAS, /* local group */ SID_NAME_WKN_GRP, /* well-known group */ SID_NAME_DELETED, /* deleted account: needed for c2 rating */ SID_NAME_INVALID, /* invalid account */ SID_NAME_UNKNOWN, /* unknown sid type */ SID_NAME_COMPUTER, /* sid for a computer */ }; /** * @brief Security Identifier * * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp **/ typedef struct sid_info { uint8 sid_rev_num; /**< SID revision number */ uint8 num_auths; /**< Number of sub-authorities */ uint8 id_auth[6]; /**< Identifier Authority */ /* * Pointer to sub-authorities. * * @note The values in these uint32's are in *native* byteorder, not * neccessarily little-endian...... JRA. */ uint32 sub_auths[MAXSUBAUTHS]; } DOM_SID; /* * The complete list of SIDS belonging to this user. * Created when a vuid is registered. * The definition of the user_sids array is as follows : * * token->user_sids[0] = primary user SID. * token->user_sids[1] = primary group SID. * token->user_sids[2..num_sids] = supplementary group SIDS. */ #define PRIMARY_USER_SID_INDEX 0 #define PRIMARY_GROUP_SID_INDEX 1 typedef struct _nt_user_token { size_t num_sids; DOM_SID *user_sids; } NT_USER_TOKEN; /*** query a local group, get a list of these: shows who is in that group ***/ /* local group member info */ typedef struct local_grp_member_info { DOM_SID sid ; /* matches with name */ uint8 sid_use; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */ fstring name ; /* matches with sid: must be of the form "DOMAIN\account" */ } LOCAL_GRP_MEMBER; /* enumerate these to get list of local groups */ /* local group info */ typedef struct local_grp_info { fstring name; fstring comment; } LOCAL_GRP; /*** enumerate these to get list of domain groups ***/ /* domain group member info */ typedef struct domain_grp_info { fstring name; fstring comment; uint32 rid; /* group rid */ uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */ } DOMAIN_GRP; /*** query a domain group, get a list of these: shows who is in that group ***/ /* domain group info */ typedef struct domain_grp_member_info { fstring name; uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */ } DOMAIN_GRP_MEMBER; /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */ typedef struct time_info { uint32 time; } UTIME; /* Structure used when SMBwritebmpx is active */ typedef struct { size_t wr_total_written; /* So we know when to discard this */ int32 wr_timeout; int32 wr_errclass; int32 wr_error; /* Cached errors */ BOOL wr_mode; /* write through mode) */ BOOL wr_discard; /* discard all further data */ } write_bmpx_struct; typedef struct write_cache { SMB_OFF_T file_size; SMB_OFF_T offset; size_t alloc_size; size_t data_size; char *data; } write_cache; typedef struct { smb_ucs2_t *origname; smb_ucs2_t *filename; SMB_STRUCT_STAT *statinfo; } smb_filename; typedef struct files_struct { struct files_struct *next, *prev; int fnum; struct connection_struct *conn; int fd; uint16 rap_print_jobid; SMB_DEV_T dev; SMB_INO_T inode; BOOL delete_on_close; SMB_OFF_T pos; SMB_BIG_UINT size; SMB_BIG_UINT initial_allocation_size; /* Faked up initial allocation on disk. */ mode_t mode; uint16 vuid; write_bmpx_struct *wbmpx_ptr; write_cache *wcp; struct timeval open_time; int share_mode; uint32 desired_access; time_t pending_modtime; int oplock_type; int sent_oplock_break; unsigned long file_id; BOOL can_lock; BOOL can_read; BOOL can_write; BOOL print_file; BOOL modified; BOOL is_directory; BOOL is_stat; BOOL directory_delete_on_close; char *fsp_name; } files_struct; /* used to hold an arbitrary blob of data */ typedef struct data_blob { uint8 *data; size_t length; void (*free)(struct data_blob *data_blob); } DATA_BLOB; /* * Structure used to keep directory state information around. * Used in NT change-notify code. */ typedef struct { time_t modify_time; time_t status_time; } dir_status_struct; struct vuid_cache { unsigned int entries; uint16 list[VUID_CACHE_SIZE]; }; typedef struct { char *name; BOOL is_wild; } name_compare_entry; /* Include VFS stuff */ #include "smb_acls.h" #include "vfs.h" typedef struct smb_vfs_handle_struct { void *data; /* Handle on dlopen() call */ void *handle; struct smb_vfs_handle_struct *next, *prev; } smb_vfs_handle_struct; typedef struct connection_struct { struct connection_struct *next, *prev; unsigned cnum; /* an index passed over the wire */ int service; BOOL force_user; BOOL force_group; struct vuid_cache vuid_cache; void *dirptr; BOOL printer; BOOL ipc; BOOL read_only; BOOL admin_user; char *dirpath; char *connectpath; char *origpath; struct vfs_ops vfs_ops; /* Filesystem operations */ struct smb_vfs_handle_struct *vfs_private; char *user; /* name of user who *opened* this connection */ uid_t uid; /* uid of user who *opened* this connection */ gid_t gid; /* gid of user who *opened* this connection */ char client_address[18]; /* String version of client IP address. */ uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */ /* following groups stuff added by ih */ /* This groups info is valid for the user that *opened* the connection */ int ngroups; gid_t *groups; NT_USER_TOKEN *nt_user_token; time_t lastused; BOOL used; int num_files_open; name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */ name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */ name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */ } connection_struct; struct current_user { connection_struct *conn; uint16 vuid; uid_t uid; gid_t gid; int ngroups; gid_t *groups; NT_USER_TOKEN *nt_user_token; }; /* Defines for the sent_oplock_break field above. */ #define NO_BREAK_SENT 0 #define EXCLUSIVE_BREAK_SENT 1 #define LEVEL_II_BREAK_SENT 2 typedef struct { fstring smb_name; /* user name from the client */ fstring unix_name; /* unix user name of a validated user */ fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */ fstring domain; /* domain that the client specified */ } userdom_struct; /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */ enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING, LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION}; typedef struct _print_queue_struct { int job; int size; int page_count; int status; int priority; time_t time; fstring fs_user; fstring fs_file; } print_queue_struct; enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR}; typedef struct { fstring message; int qcount; int status; } print_status_struct; /* used for server information: client, nameserv and ipc */ struct server_info_struct { fstring name; uint32 type; fstring comment; fstring domain; /* used ONLY in ipc.c NOT namework.c */ BOOL server_added; /* used ONLY in ipc.c NOT namework.c */ }; /* used for network interfaces */ struct interface { struct interface *next, *prev; struct in_addr ip; struct in_addr bcast; struct in_addr nmask; }; /* struct returned by get_share_modes */ typedef struct { pid_t pid; uint16 op_port; uint16 op_type; int share_mode; uint32 desired_access; struct timeval time; SMB_DEV_T dev; SMB_INO_T inode; unsigned long share_file_id; } share_mode_entry; #define SHAREMODE_FN_CAST() \ void (*)(share_mode_entry *, char*) #define SHAREMODE_FN(fn) \ void (*fn)(share_mode_entry *, char*) #define NT_HASH_LEN 16 #define LM_HASH_LEN 16 /* * bit flags representing initialized fields in SAM_ACCOUNT */ enum pdb_elements { PDB_UNINIT, PDB_UID, PDB_GID, PDB_SMBHOME, PDB_PROFILE, PDB_DRIVE, PDB_LOGONSCRIPT, PDB_LOGONTIME, PDB_LOGOFFTIME, PDB_KICKOFFTIME, PDB_CANCHANGETIME, PDB_MUSTCHANGETIME, PDB_PLAINTEXT_PW, PDB_USERNAME, PDB_FULLNAME, PDB_DOMAIN, PDB_NTUSERNAME, PDB_HOURSLEN, PDB_LOGONDIVS, PDB_USERSID, PDB_GROUPSID, PDB_ACCTCTRL, PDB_PASSLASTSET, PDB_UNIXHOMEDIR, PDB_ACCTDESC, PDB_WORKSTATIONS, PDB_UNKNOWNSTR, PDB_MUNGEDDIAL, PDB_HOURS, PDB_UNKNOWN3, PDB_UNKNOWN5, PDB_UNKNOWN6, PDB_LMPASSWD, PDB_NTPASSWD, /* this must be the last element */ PDB_COUNT, }; enum pdb_value_state { PDB_DEFAULT=0, PDB_SET, PDB_CHANGED }; #define IS_SAM_UNIX_USER(x) \ (( pdb_get_init_flags(x, PDB_UID) != PDB_DEFAULT ) \ && ( pdb_get_init_flags(x,PDB_GID) != PDB_DEFAULT )) #define IS_SAM_SET(x, flag) (pdb_get_init_flags(x, flag) == PDB_SET) #define IS_SAM_CHANGED(x, flag) (pdb_get_init_flags(x, flag) == PDB_CHANGED) #define IS_SAM_DEFAULT(x, flag) (pdb_get_init_flags(x, flag) == PDB_DEFAULT) typedef struct sam_passwd { TALLOC_CTX *mem_ctx; void (*free_fn)(struct sam_passwd **); struct pdb_methods *methods; struct user_data { /* initiailization flags */ struct bitmap *change_flags; struct bitmap *set_flags; time_t logon_time; /* logon time */ time_t logoff_time; /* logoff time */ time_t kickoff_time; /* kickoff time */ time_t pass_last_set_time; /* password last set time */ time_t pass_can_change_time; /* password can change time */ time_t pass_must_change_time; /* password must change time */ const char * username; /* UNIX username string */ const char * domain; /* Windows Domain name */ const char * nt_username; /* Windows username string */ const char * full_name; /* user's full name string */ const char * unix_home_dir; /* UNIX home directory string */ const char * home_dir; /* home directory string */ const char * dir_drive; /* home directory drive string */ const char * logon_script; /* logon script string */ const char * profile_path; /* profile path string */ const char * acct_desc ; /* user description string */ const char * workstations; /* login from workstations string */ const char * unknown_str ; /* don't know what this is, yet. */ const char * munged_dial ; /* munged path name and dial-back tel number */ uid_t uid; /* this is a unix uid_t */ gid_t gid; /* this is a unix gid_t */ DOM_SID user_sid; /* Primary User SID */ DOM_SID group_sid; /* Primary Group SID */ DATA_BLOB lm_pw; /* .data is Null if no password */ DATA_BLOB nt_pw; /* .data is Null if no password */ char* plaintext_pw; /* is Null if not available */ uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */ uint32 unknown_3; /* 0x00ff ffff */ uint16 logon_divs; /* 168 - number of hours in a week */ uint32 hours_len; /* normally 21 bytes */ uint8 hours[MAX_HOURS_LEN]; uint32 unknown_5; /* 0x0002 0000 */ uint32 unknown_6; /* 0x0000 04ec */ } private; /* Lets see if the remaining code can get the hint that you are meant to use the pdb_...() functions. */ } SAM_ACCOUNT; /* * Flags for account policy. */ #define AP_MIN_PASSWORD_LEN 1 #define AP_PASSWORD_HISTORY 2 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3 #define AP_MAX_PASSWORD_AGE 4 #define AP_MIN_PASSWORD_AGE 5 #define AP_LOCK_ACCOUNT_DURATION 6 #define AP_RESET_COUNT_TIME 7 #define AP_BAD_ATTEMPT_LOCKOUT 8 #define AP_TIME_TO_LOGOUT 9 /* * Flags for local user manipulation. */ #define LOCAL_ADD_USER 0x1 #define LOCAL_DELETE_USER 0x2 #define LOCAL_DISABLE_USER 0x4 #define LOCAL_ENABLE_USER 0x8 #define LOCAL_TRUST_ACCOUNT 0x10 #define LOCAL_SET_NO_PASSWORD 0x20 #define LOCAL_SET_PASSWORD 0x40 #define LOCAL_SET_LDAP_ADMIN_PW 0x80 #define LOCAL_INTERDOM_ACCOUNT 0x100 #define LOCAL_AM_ROOT 0x200 /* Act as root */ /* key and data in the connections database - used in smbstatus and smbd */ struct connections_key { pid_t pid; int cnum; fstring name; }; struct connections_data { int magic; pid_t pid; int cnum; uid_t uid; gid_t gid; char name[24]; char addr[24]; char machine[FSTRING_LEN]; time_t start; uint32 bcast_msg_flags; }; /* key and data records in the tdb locking database */ struct locking_key { SMB_DEV_T dev; SMB_INO_T inode; }; struct locking_data { union { int num_share_mode_entries; share_mode_entry dummy; /* Needed for alignment. */ } u; /* the following two entries are implicit share_mode_entry modes[num_share_mode_entries]; char file_name[]; */ }; /* the following are used by loadparm for option lists */ typedef enum { P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST, P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP } parm_type; typedef enum { P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE } parm_class; /* passed to br lock code */ enum brl_type {READ_LOCK, WRITE_LOCK, PENDING_LOCK}; struct enum_list { int value; const char *name; }; #define BRLOCK_FN_CAST() \ void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \ enum brl_type lock_type, \ br_off start, br_off size) #define BRLOCK_FN(fn) \ void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \ enum brl_type lock_type, \ br_off start, br_off size) struct parm_struct { const char *label; parm_type type; parm_class class; void *ptr; BOOL (*special)(const char *, char **); const struct enum_list *enum_list; unsigned flags; union { BOOL bvalue; int ivalue; char *svalue; char cvalue; char **lvalue; } def; }; struct bitmap { uint32 *b; unsigned int n; }; #define FLAG_BASIC 0x0001 /* fundamental options */ #define FLAG_SHARE 0x0002 /* file sharing options */ #define FLAG_PRINT 0x0004 /* printing options */ #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */ #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */ #define FLAG_ADVANCED 0x0020 /* Parameters that the wizard will operate on */ #define FLAG_DEVELOPER 0x0040 /* Parameters that the wizard will operate on */ #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */ #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */ #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */ #ifndef LOCKING_VERSION #define LOCKING_VERSION 4 #endif /* LOCKING_VERSION */ /* the basic packet size, assuming no words or bytes */ #define smb_size 39 /* offsets into message for common items */ #define smb_com 8 #define smb_rcls 9 #define smb_reh 10 #define smb_err 11 #define smb_flg 13 #define smb_flg2 14 #define smb_pidhigh 16 #define smb_ss_field 18 #define smb_tid 28 #define smb_pid 30 #define smb_uid 32 #define smb_mid 34 #define smb_wct 36 #define smb_vwv 37 #define smb_vwv0 37 #define smb_vwv1 39 #define smb_vwv2 41 #define smb_vwv3 43 #define smb_vwv4 45 #define smb_vwv5 47 #define smb_vwv6 49 #define smb_vwv7 51 #define smb_vwv8 53 #define smb_vwv9 55 #define smb_vwv10 57 #define smb_vwv11 59 #define smb_vwv12 61 #define smb_vwv13 63 #define smb_vwv14 65 #define smb_vwv15 67 #define smb_vwv16 69 #define smb_vwv17 71 /* flag defines. CIFS spec 3.1.1 */ #define FLAG_SUPPORT_LOCKREAD 0x01 #define FLAG_CLIENT_BUF_AVAIL 0x02 #define FLAG_RESERVED 0x04 #define FLAG_CASELESS_PATHNAMES 0x08 #define FLAG_CANONICAL_PATHNAMES 0x10 #define FLAG_REQUEST_OPLOCK 0x20 #define FLAG_REQUEST_BATCH_OPLOCK 0x40 #define FLAG_REPLY 0x80 /* the complete */ #define SMBmkdir 0x00 /* create directory */ #define SMBrmdir 0x01 /* delete directory */ #define SMBopen 0x02 /* open file */ #define SMBcreate 0x03 /* create file */ #define SMBclose 0x04 /* close file */ #define SMBflush 0x05 /* flush file */ #define SMBunlink 0x06 /* delete file */ #define SMBmv 0x07 /* rename file */ #define SMBgetatr 0x08 /* get file attributes */ #define SMBsetatr 0x09 /* set file attributes */ #define SMBread 0x0A /* read from file */ #define SMBwrite 0x0B /* write to file */ #define SMBlock 0x0C /* lock byte range */ #define SMBunlock 0x0D /* unlock byte range */ #define SMBctemp 0x0E /* create temporary file */ #define SMBmknew 0x0F /* make new file */ #define SMBchkpth 0x10 /* check directory path */ #define SMBexit 0x11 /* process exit */ #define SMBlseek 0x12 /* seek */ #define SMBtcon 0x70 /* tree connect */ #define SMBtconX 0x75 /* tree connect and X*/ #define SMBtdis 0x71 /* tree disconnect */ #define SMBnegprot 0x72 /* negotiate protocol */ #define SMBdskattr 0x80 /* get disk attributes */ #define SMBsearch 0x81 /* search directory */ #define SMBsplopen 0xC0 /* open print spool file */ #define SMBsplwr 0xC1 /* write to print spool file */ #define SMBsplclose 0xC2 /* close print spool file */ #define SMBsplretq 0xC3 /* return print queue */ #define SMBsends 0xD0 /* send single block message */ #define SMBsendb 0xD1 /* send broadcast message */ #define SMBfwdname 0xD2 /* forward user name */ #define SMBcancelf 0xD3 /* cancel forward */ #define SMBgetmac 0xD4 /* get machine name */ #define SMBsendstrt 0xD5 /* send start of multi-block message */ #define SMBsendend 0xD6 /* send end of multi-block message */ #define SMBsendtxt 0xD7 /* send text of multi-block message */ /* Core+ protocol */ #define SMBlockread 0x13 /* Lock a range and read */ #define SMBwriteunlock 0x14 /* Unlock a range then write */ #define SMBreadbraw 0x1a /* read a block of data with no smb header */ #define SMBwritebraw 0x1d /* write a block of data with no smb header */ #define SMBwritec 0x20 /* secondary write request */ #define SMBwriteclose 0x2c /* write a file then close it */ /* dos extended protocol */ #define SMBreadBraw 0x1A /* read block raw */ #define SMBreadBmpx 0x1B /* read block multiplexed */ #define SMBreadBs 0x1C /* read block (secondary response) */ #define SMBwriteBraw 0x1D /* write block raw */ #define SMBwriteBmpx 0x1E /* write block multiplexed */ #define SMBwriteBs 0x1F /* write block (secondary request) */ #define SMBwriteC 0x20 /* write complete response */ #define SMBsetattrE 0x22 /* set file attributes expanded */ #define SMBgetattrE 0x23 /* get file attributes expanded */ #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */ #define SMBtrans 0x25 /* transaction - name, bytes in/out */ #define SMBtranss 0x26 /* transaction (secondary request/response) */ #define SMBioctl 0x27 /* IOCTL */ #define SMBioctls 0x28 /* IOCTL (secondary request/response) */ #define SMBcopy 0x29 /* copy */ #define SMBmove 0x2A /* move */ #define SMBecho 0x2B /* echo */ #define SMBopenX 0x2D /* open and X */ #define SMBreadX 0x2E /* read and X */ #define SMBwriteX 0x2F /* write and X */ #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */ #define SMBffirst 0x82 /* find first */ #define SMBfunique 0x83 /* find unique */ #define SMBfclose 0x84 /* find close */ #define SMBkeepalive 0x85 /* keepalive */ #define SMBinvalid 0xFE /* invalid command */ /* Extended 2.0 protocol */ #define SMBtrans2 0x32 /* TRANS2 protocol set */ #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */ #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */ #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */ #define SMBulogoffX 0x74 /* user logoff */ /* NT SMB extensions. */ #define SMBnttrans 0xA0 /* NT transact */ #define SMBnttranss 0xA1 /* NT transact secondary */ #define SMBntcreateX 0xA2 /* NT create and X */ #define SMBntcancel 0xA4 /* NT cancel */ /* These are the trans subcommands */ #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01 #define TRANSACT_DCERPCCMD 0x26 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53 /* These are the TRANS2 sub commands */ #define TRANSACT2_OPEN 0 #define TRANSACT2_FINDFIRST 1 #define TRANSACT2_FINDNEXT 2 #define TRANSACT2_QFSINFO 3 #define TRANSACT2_SETFSINFO 4 #define TRANSACT2_QPATHINFO 5 #define TRANSACT2_SETPATHINFO 6 #define TRANSACT2_QFILEINFO 7 #define TRANSACT2_SETFILEINFO 8 #define TRANSACT2_FSCTL 9 #define TRANSACT2_IOCTL 0xA #define TRANSACT2_FINDNOTIFYFIRST 0xB #define TRANSACT2_FINDNOTIFYNEXT 0xC #define TRANSACT2_MKDIR 0xD #define TRANSACT2_SESSION_SETUP 0xE #define TRANSACT2_GET_DFS_REFERRAL 0x10 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11 /* These are the NT transact sub commands. */ #define NT_TRANSACT_CREATE 1 #define NT_TRANSACT_IOCTL 2 #define NT_TRANSACT_SET_SECURITY_DESC 3 #define NT_TRANSACT_NOTIFY_CHANGE 4 #define NT_TRANSACT_RENAME 5 #define NT_TRANSACT_QUERY_SECURITY_DESC 6 /* Relevant IOCTL codes */ #define IOCTL_QUERY_JOB_INFO 0x530060 /* these are the trans2 sub fields for primary requests */ #define smb_tpscnt smb_vwv0 #define smb_tdscnt smb_vwv1 #define smb_mprcnt smb_vwv2 #define smb_mdrcnt smb_vwv3 #define smb_msrcnt smb_vwv4 #define smb_flags smb_vwv5 #define smb_timeout smb_vwv6 #define smb_pscnt smb_vwv9 #define smb_psoff smb_vwv10 #define smb_dscnt smb_vwv11 #define smb_dsoff smb_vwv12 #define smb_suwcnt smb_vwv13 #define smb_setup smb_vwv14 #define smb_setup0 smb_setup #define smb_setup1 (smb_setup+2) #define smb_setup2 (smb_setup+4) /* these are for the secondary requests */ #define smb_spscnt smb_vwv2 #define smb_spsoff smb_vwv3 #define smb_spsdisp smb_vwv4 #define smb_sdscnt smb_vwv5 #define smb_sdsoff smb_vwv6 #define smb_sdsdisp smb_vwv7 #define smb_sfid smb_vwv8 /* and these for responses */ #define smb_tprcnt smb_vwv0 #define smb_tdrcnt smb_vwv1 #define smb_prcnt smb_vwv3 #define smb_proff smb_vwv4 #define smb_prdisp smb_vwv5 #define smb_drcnt smb_vwv6 #define smb_droff smb_vwv7 #define smb_drdisp smb_vwv8 /* these are for the NT trans primary request. */ #define smb_nt_MaxSetupCount smb_vwv0 #define smb_nt_Flags (smb_vwv0 + 1) #define smb_nt_TotalParameterCount (smb_vwv0 + 3) #define smb_nt_TotalDataCount (smb_vwv0 + 7) #define smb_nt_MaxParameterCount (smb_vwv0 + 11) #define smb_nt_MaxDataCount (smb_vwv0 + 15) #define smb_nt_ParameterCount (smb_vwv0 + 19) #define smb_nt_ParameterOffset (smb_vwv0 + 23) #define smb_nt_DataCount (smb_vwv0 + 27) #define smb_nt_DataOffset (smb_vwv0 + 31) #define smb_nt_SetupCount (smb_vwv0 + 35) #define smb_nt_Function (smb_vwv0 + 36) #define smb_nt_SetupStart (smb_vwv0 + 38) /* these are for the NT trans secondary request. */ #define smb_nts_TotalParameterCount (smb_vwv0 + 3) #define smb_nts_TotalDataCount (smb_vwv0 + 7) #define smb_nts_ParameterCount (smb_vwv0 + 11) #define smb_nts_ParameterOffset (smb_vwv0 + 15) #define smb_nts_ParameterDisplacement (smb_vwv0 + 19) #define smb_nts_DataCount (smb_vwv0 + 23) #define smb_nts_DataOffset (smb_vwv0 + 27) #define smb_nts_DataDisplacement (smb_vwv0 + 31) /* these are for the NT trans reply. */ #define smb_ntr_TotalParameterCount (smb_vwv0 + 3) #define smb_ntr_TotalDataCount (smb_vwv0 + 7) #define smb_ntr_ParameterCount (smb_vwv0 + 11) #define smb_ntr_ParameterOffset (smb_vwv0 + 15) #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19) #define smb_ntr_DataCount (smb_vwv0 + 23) #define smb_ntr_DataOffset (smb_vwv0 + 27) #define smb_ntr_DataDisplacement (smb_vwv0 + 31) /* these are for the NT create_and_X */ #define smb_ntcreate_NameLength (smb_vwv0 + 5) #define smb_ntcreate_Flags (smb_vwv0 + 7) #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11) #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15) #define smb_ntcreate_AllocationSize (smb_vwv0 + 19) #define smb_ntcreate_FileAttributes (smb_vwv0 + 27) #define smb_ntcreate_ShareAccess (smb_vwv0 + 31) #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35) #define smb_ntcreate_CreateOptions (smb_vwv0 + 39) #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43) #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47) /* this is used on a TConX. I'm not sure the name is very helpful though */ #define SMB_SUPPORT_SEARCH_BITS 0x0001 #define SMB_SHARE_IN_DFS 0x0002 /* Named pipe write mode flags. Used in writeX calls. */ #define PIPE_RAW_MODE 0x4 #define PIPE_START_MESSAGE 0x8 /* File Specific access rights */ #define FILE_READ_DATA 0x00000001 #define FILE_WRITE_DATA 0x00000002 #define FILE_APPEND_DATA 0x00000004 #define FILE_READ_EA 0x00000008 /* File and directory */ #define FILE_WRITE_EA 0x00000010 /* File and directory */ #define FILE_EXECUTE 0x00000020 #define FILE_DELETE_CHILD 0x00000040 #define FILE_READ_ATTRIBUTES 0x00000080 #define FILE_WRITE_ATTRIBUTES 0x00000100 #define FILE_ALL_ACCESS 0x000001FF /* Directory specific access rights */ #define FILE_LIST_DIRECTORY 0x00000001 #define FILE_ADD_FILE 0x00000002 #define FILE_ADD_SUBDIRECTORY 0x00000004 #define FILE_TRAVERSE 0x00000020 #define FILE_DELETE_CHILD 0x00000040 /* the desired access to use when opening a pipe */ #define DESIRED_ACCESS_PIPE 0x2019f /* Generic access masks & rights. */ #define DELETE_ACCESS (1L<<16) /* 0x00010000 */ #define READ_CONTROL_ACCESS (1L<<17) /* 0x00020000 */ #define WRITE_DAC_ACCESS (1L<<18) /* 0x00040000 */ #define WRITE_OWNER_ACCESS (1L<<19) /* 0x00080000 */ #define SYNCHRONIZE_ACCESS (1L<<20) /* 0x00100000 */ #define SYSTEM_SECURITY_ACCESS (1L<<24) /* 0x01000000 */ #define MAXIMUM_ALLOWED_ACCESS (1L<<25) /* 0x02000000 */ #define GENERIC_ALL_ACCESS (1<<28) /* 0x10000000 */ #define GENERIC_EXECUTE_ACCESS (1<<29) /* 0x20000000 */ #define GENERIC_WRITE_ACCESS (1<<30) /* 0x40000000 */ #define GENERIC_READ_ACCESS (((unsigned)1)<<31) /* 0x80000000 */ /* Mapping of generic access rights for files to specific rights. */ #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS) #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\ FILE_READ_EA|SYNCHRONIZE_ACCESS) #define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\ FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS) #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\ FILE_EXECUTE|SYNCHRONIZE_ACCESS) /* Mapping of access rights to UNIX perms. */ #define UNIX_ACCESS_RWX FILE_GENERIC_ALL #define UNIX_ACCESS_R FILE_GENERIC_READ #define UNIX_ACCESS_W FILE_GENERIC_WRITE #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE #if 0 /* * This is the old mapping we used to use. To get W2KSP2 profiles * working we need to map to the canonical file perms. */ #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X) #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\ FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA) #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\ FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\ FILE_APPEND_DATA|FILE_WRITE_DATA) #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\ FILE_EXECUTE|FILE_READ_ATTRIBUTES) #endif #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS) /* Flags field. */ #define REQUEST_OPLOCK 2 #define REQUEST_BATCH_OPLOCK 4 #define OPEN_DIRECTORY 8 /* ShareAccess field. */ #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */ #define FILE_SHARE_READ 1 #define FILE_SHARE_WRITE 2 #define FILE_SHARE_DELETE 4 /* FileAttributesField */ #define FILE_ATTRIBUTE_READONLY 0x001L #define FILE_ATTRIBUTE_HIDDEN 0x002L #define FILE_ATTRIBUTE_SYSTEM 0x004L #define FILE_ATTRIBUTE_DIRECTORY 0x010L #define FILE_ATTRIBUTE_ARCHIVE 0x020L #define FILE_ATTRIBUTE_NORMAL 0x080L #define FILE_ATTRIBUTE_TEMPORARY 0x100L #define FILE_ATTRIBUTE_SPARSE 0x200L #define FILE_ATTRIBUTE_COMPRESSED 0x800L #define FILE_ATTRIBUTE_NONINDEXED 0x2000L #define SAMBA_ATTRIBUTES_MASK 0x7F /* Flags - combined with attributes. */ #define FILE_FLAG_WRITE_THROUGH 0x80000000L #define FILE_FLAG_NO_BUFFERING 0x20000000L #define FILE_FLAG_RANDOM_ACCESS 0x10000000L #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L /* CreateDisposition field. */ #define FILE_SUPERSEDE 0 #define FILE_OPEN 1 #define FILE_CREATE 2 #define FILE_OPEN_IF 3 #define FILE_OVERWRITE 4 #define FILE_OVERWRITE_IF 5 /* CreateOptions field. */ #define FILE_DIRECTORY_FILE 0x0001 #define FILE_WRITE_THROUGH 0x0002 #define FILE_SEQUENTIAL_ONLY 0x0004 #define FILE_NON_DIRECTORY_FILE 0x0040 #define FILE_NO_EA_KNOWLEDGE 0x0200 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400 #define FILE_RANDOM_ACCESS 0x0800 #define FILE_DELETE_ON_CLOSE 0x1000 #define FILE_OPEN_BY_FILE_ID 0x2000 /* Responses when opening a file. */ #define FILE_WAS_SUPERSEDED 0 #define FILE_WAS_OPENED 1 #define FILE_WAS_CREATED 2 #define FILE_WAS_OVERWRITTEN 3 /* File type flags */ #define FILE_TYPE_DISK 0 #define FILE_TYPE_BYTE_MODE_PIPE 1 #define FILE_TYPE_MESSAGE_MODE_PIPE 2 #define FILE_TYPE_PRINTER 3 #define FILE_TYPE_COMM_DEVICE 4 #define FILE_TYPE_UNKNOWN 0xFFFF /* Flag for NT transact rename call. */ #define RENAME_REPLACE_IF_EXISTS 1 /* Filesystem Attributes. */ #define FILE_CASE_SENSITIVE_SEARCH 0x01 #define FILE_CASE_PRESERVED_NAMES 0x02 #define FILE_UNICODE_ON_DISK 0x04 /* According to cifs9f, this is 4, not 8 */ /* Acconding to testing, this actually sets the security attribute! */ #define FILE_PERSISTENT_ACLS 0x08 /* These entries added from cifs9f --tsb */ #define FILE_FILE_COMPRESSION 0x10 #define FILE_VOLUME_QUOTAS 0x20 /* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */ #define FILE_VOLUME_SPARSE_FILE 0x40 #define FILE_VOLUME_IS_COMPRESSED 0x8000 /* ChangeNotify flags. */ #define FILE_NOTIFY_CHANGE_FILE 0x001 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004 #define FILE_NOTIFY_CHANGE_SIZE 0x008 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020 #define FILE_NOTIFY_CHANGE_CREATION 0x040 #define FILE_NOTIFY_CHANGE_EA 0x080 #define FILE_NOTIFY_CHANGE_SECURITY 0x100 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200 /* where to find the base of the SMB packet proper */ #define smb_base(buf) (((char *)(buf))+4) /* we don't allow server strings to be longer than 48 characters as otherwise NT will not honour the announce packets */ #define MAX_SERVER_STRING_LENGTH 48 #define SMB_SUCCESS 0 /* The request was successful. */ #ifdef WITH_DFS void dfs_unlogin(void); extern int dcelogin_atmost_once; #endif #ifdef NOSTRDUP char *strdup(char *s); #endif #ifndef SIGNAL_CAST #define SIGNAL_CAST (RETSIGTYPE (*)(int)) #endif #ifndef SELECT_CAST #define SELECT_CAST #endif /* these are used in NetServerEnum to choose what to receive */ #define SV_TYPE_WORKSTATION 0x00000001 #define SV_TYPE_SERVER 0x00000002 #define SV_TYPE_SQLSERVER 0x00000004 #define SV_TYPE_DOMAIN_CTRL 0x00000008 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010 #define SV_TYPE_TIME_SOURCE 0x00000020 #define SV_TYPE_AFP 0x00000040 #define SV_TYPE_NOVELL 0x00000080 #define SV_TYPE_DOMAIN_MEMBER 0x00000100 #define SV_TYPE_PRINTQ_SERVER 0x00000200 #define SV_TYPE_DIALIN_SERVER 0x00000400 #define SV_TYPE_SERVER_UNIX 0x00000800 #define SV_TYPE_NT 0x00001000 #define SV_TYPE_WFW 0x00002000 #define SV_TYPE_SERVER_MFPN 0x00004000 #define SV_TYPE_SERVER_NT 0x00008000 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000 #define SV_TYPE_BACKUP_BROWSER 0x00020000 #define SV_TYPE_MASTER_BROWSER 0x00040000 #define SV_TYPE_DOMAIN_MASTER 0x00080000 #define SV_TYPE_SERVER_OSF 0x00100000 #define SV_TYPE_SERVER_VMS 0x00200000 #define SV_TYPE_WIN95_PLUS 0x00400000 #define SV_TYPE_DFS_SERVER 0x00800000 #define SV_TYPE_ALTERNATE_XPORT 0x20000000 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000 #define SV_TYPE_DOMAIN_ENUM 0x80000000 #define SV_TYPE_ALL 0xFFFFFFFF /* This was set by JHT in liaison with Jeremy Allison early 1997 * History: * Version 4.0 - never made public * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9 * - Reappeared in 1.9.16p11 with fixed smbd services * Version 4.20 - To indicate that nmbd and browsing now works better * Version 4.50 - Set at release of samba-2.2.0 by JHT * * Note: In the presence of NT4.X do not set above 4.9 * Setting this above 4.9 can have undesired side-effects. * This may change again in Samba-3.0 after further testing. JHT */ #define DEFAULT_MAJOR_VERSION 0x04 #define DEFAULT_MINOR_VERSION 0x09 /* Browser Election Values */ #define BROWSER_ELECTION_VERSION 0x010f #define BROWSER_CONSTANT 0xaa55 /* Sercurity mode bits. */ #define NEGOTIATE_SECURITY_USER_LEVEL 0x01 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 /* NT Flags2 bits - cifs6.txt section 3.1.2 */ #define FLAGS2_LONG_PATH_COMPONENTS 0x0001 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004 #define FLAGS2_IS_LONG_NAME 0x0040 #define FLAGS2_EXTENDED_SECURITY 0x0800 #define FLAGS2_DFS_PATHNAMES 0x1000 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000 #define FLAGS2_32_BIT_ERROR_CODES 0x4000 #define FLAGS2_UNICODE_STRINGS 0x8000 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */ /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */ #define CAP_RAW_MODE 0x0001 #define CAP_MPX_MODE 0x0002 #define CAP_UNICODE 0x0004 #define CAP_LARGE_FILES 0x0008 #define CAP_NT_SMBS 0x0010 #define CAP_RPC_REMOTE_APIS 0x0020 #define CAP_STATUS32 0x0040 #define CAP_LEVEL_II_OPLOCKS 0x0080 #define CAP_LOCK_AND_READ 0x0100 #define CAP_NT_FIND 0x0200 #define CAP_DFS 0x1000 #define CAP_W2K_SMBS 0x2000 #define CAP_LARGE_READX 0x4000 #define CAP_LARGE_WRITEX 0x8000 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */ #define CAP_EXTENDED_SECURITY 0x80000000 /* protocol types. It assumes that higher protocols include lower protocols as subsets */ enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1}; /* security levels */ enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS}; /* server roles */ enum server_types { ROLE_STANDALONE, ROLE_DOMAIN_MEMBER, ROLE_DOMAIN_BDC, ROLE_DOMAIN_PDC }; /* printing types */ enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX, PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ, PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2 #ifdef DEVELOPER ,PRINT_TEST,PRINT_VLP #endif /* DEVELOPER */ }; /* LDAP schema types */ enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA}; /* LDAP SSL options */ enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS}; /* LDAP PASSWD SYNC methods */ enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY}; /* Remote architectures we know about. */ enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT, RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_SAMBA}; /* case handling */ enum case_handling {CASE_LOWER,CASE_UPPER}; /* * Global value meaing that the smb_uid field should be * ingored (in share level security and protocol level == CORE) */ #define UID_FIELD_INVALID 0 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */ /* * Size of buffer to use when moving files across filesystems. */ #define COPYBUF_SIZE (8*1024) /* * Values used to override error codes. */ extern int unix_ERR_class; extern int unix_ERR_code; extern NTSTATUS unix_ERR_ntstatus; /* * Used in chaining code. */ extern int chain_size; /* * Map the Core and Extended Oplock requesst bits down * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK). */ /* * Core protocol. */ #define CORE_OPLOCK_REQUEST(inbuf) \ ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5) /* * Extended protocol. */ #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1) /* Lock types. */ #define LOCKING_ANDX_SHARED_LOCK 0x1 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4 #define LOCKING_ANDX_CANCEL_LOCK 0x8 #define LOCKING_ANDX_LARGE_FILES 0x10 /* Oplock levels */ #define OPLOCKLEVEL_NONE 0 #define OPLOCKLEVEL_II 1 /* * Bits we test with. */ #define NO_OPLOCK 0 #define EXCLUSIVE_OPLOCK 1 #define BATCH_OPLOCK 2 #define LEVEL_II_OPLOCK 4 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK)) #define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK) #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK) #define CORE_OPLOCK_GRANTED (1<<5) #define EXTENDED_OPLOCK_GRANTED (1<<15) /* * Return values for oplock types. */ #define NO_OPLOCK_RETURN 0 #define EXCLUSIVE_OPLOCK_RETURN 1 #define BATCH_OPLOCK_RETURN 2 #define LEVEL_II_OPLOCK_RETURN 3 /* * Loopback command offsets. */ #define OPBRK_CMD_LEN_OFFSET 0 #define OPBRK_CMD_PORT_OFFSET 4 #define OPBRK_CMD_HEADER_LEN 6 #define OPBRK_MESSAGE_CMD_OFFSET 0 /* * Oplock break command code to send over the udp socket. * The same message is sent for both exlusive and level II breaks. * * The form of this is : * * 0 2 2+pid 2+pid+dev 2+pid+dev+ino * +----+--------+-------+--------+---------+ * | cmd| pid | dev | inode | fileid | * +----+--------+-------+--------+---------+ */ #define OPLOCK_BREAK_PID_OFFSET 2 #define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t)) #define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T)) #define OPLOCK_BREAK_FILEID_OFFSET (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T)) #define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long)) /* Message types */ #define OPLOCK_BREAK_CMD 0x1 #define KERNEL_OPLOCK_BREAK_CMD 0x2 #define LEVEL_II_OPLOCK_BREAK_CMD 0x3 #define ASYNC_LEVEL_II_OPLOCK_BREAK_CMD 0x4 /* * Capabilities abstracted for different systems. */ #define KERNEL_OPLOCK_CAPABILITY 0x1 /* * Oplock break command code sent via the kernel interface (if it exists). * * Form of this is : * * 0 2 2+devsize 2+devsize+inodesize * +----+--------+--------+----------+ * | cmd| dev | inode | fileid | * +----+--------+--------+----------+ */ #define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2 #define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T)) #define KERNEL_OPLOCK_BREAK_FILEID_OFFSET (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T)) #define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long)) /* if a kernel does support oplocks then a structure of the following typee is used to describe how to interact with the kernel */ struct kernel_oplocks { BOOL (*receive_message)(fd_set *fds, char *buffer, int buffer_len); BOOL (*set_oplock)(files_struct *fsp, int oplock_type); void (*release_oplock)(files_struct *fsp); BOOL (*parse_message)(char *msg_start, int msg_len, SMB_INO_T *inode, SMB_DEV_T *dev, unsigned long *file_id); BOOL (*msg_waiting)(fd_set *fds); int notification_fd; }; #define CMD_REPLY 0x8000 /* this structure defines the functions for doing change notify in various implementations */ struct cnotify_fns { void * (*register_notify)(connection_struct *conn, char *path, uint32 flags); BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t); void (*remove_notify)(void *data); int select_time; }; #include "smb_macros.h" /* A netbios name structure. */ struct nmb_name { char name[17]; char scope[64]; unsigned int name_type; }; /* A netbios node status array element. */ struct node_status { char name[16]; unsigned char type; unsigned char flags; }; struct pwd_info { BOOL null_pwd; BOOL cleartext; BOOL crypted; fstring password; uchar smb_lm_pwd[16]; uchar smb_nt_pwd[16]; uchar smb_lm_owf[24]; uchar smb_nt_owf[128]; size_t nt_owf_len; uchar lm_cli_chal[8]; uchar nt_cli_chal[128]; size_t nt_cli_chal_len; uchar sess_key[16]; }; #include "rpc_creds.h" #include "rpc_misc.h" #include "rpc_secdes.h" #include "nt_printing.h" typedef struct user_struct { struct user_struct *next, *prev; uint16 vuid; /* Tag for this entry. */ uid_t uid; /* uid of a validated user */ gid_t gid; /* gid of a validated user */ userdom_struct user; char *homedir; char *unix_homedir; char *logon_script; BOOL guest; /* following groups stuff added by ih */ /* This groups info is needed for when we become_user() for this uid */ int n_groups; gid_t *groups; NT_USER_TOKEN *nt_user_token; uint8 session_key[16]; char *session_keystr; /* used by utmp and pam session code. TDB key string */ int homes_snum; struct auth_serversupplied_info *server_info; } user_struct; struct unix_error_map { int unix_error; int dos_class; int dos_code; NTSTATUS nt_error; }; #include "ntdomain.h" #include "client.h" /* * Size of new password account encoding string. This is enough space to * hold 11 ACB characters, plus the surrounding [] and a terminating null. * Do not change unless you are adding new ACB bits! */ #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14 /* Do you want session setups at user level security with a invalid password to be rejected or allowed in as guest? WinNT rejects them but it can be a pain as it means "net view" needs to use a password You have 3 choices in the setting of map_to_guest: "NEVER_MAP_TO_GUEST" means session setups with an invalid password are rejected. This is the default. "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password are rejected, unless the username does not exist, in which case it is treated as a guest login "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password are treated as a guest login Note that map_to_guest only has an effect in user or server level security. */ #define NEVER_MAP_TO_GUEST 0 #define MAP_TO_GUEST_ON_BAD_USER 1 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2 #define SAFE_NETBIOS_CHARS ". -_" /* generic iconv conversion structure */ typedef struct { size_t (*direct)(void *cd, char **inbuf, size_t *inbytesleft, char **outbuf, size_t *outbytesleft); size_t (*pull)(void *cd, char **inbuf, size_t *inbytesleft, char **outbuf, size_t *outbytesleft); size_t (*push)(void *cd, char **inbuf, size_t *inbytesleft, char **outbuf, size_t *outbytesleft); void *cd_direct, *cd_pull, *cd_push; char *from_name, *to_name; } *smb_iconv_t; /* The maximum length of a trust account password. Used when we randomly create it, 15 char passwords exceed NT4's max password length */ #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14 #include "popt_common.h" /* Module support */ typedef NTSTATUS (init_module_function) (void); #endif /* _SMB_H */