/* Unix SMB/Netbios implementation. Version 1.9. SMB parameters and setup Copyright (C) Andrew Tridgell 1992-1998 Copyright (C) John H Terpstra 1996-1998 Copyright (C) Luke Kenneth Casson Leighton 1996-1998 Copyright (C) Paul Ashton 1998 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _SMB_H #define _SMB_H #define BUFFER_SIZE (0xFFFF) #define SAFETY_MARGIN 1024 #define NMB_PORT 137 #define DGRAM_PORT 138 #define SMB_PORT 139 #define False (0) #define True (1) #define BOOLSTR(b) ((b) ? "Yes" : "No") #define BITSETB(ptr,bit) ((((char *)ptr)[0] & (1<<(bit)))!=0) #define BITSETW(ptr,bit) ((SVAL(ptr,0) & (1<<(bit)))!=0) #define IS_BITS_SET_ALL(var,bit) (((var)&(bit))==(bit)) #define IS_BITS_SET_SOME(var,bit) (((var)&(bit))!=0) #define IS_BITS_CLR_ALL(var,bit) (((var)&(~(bit)))==0) #define PTR_DIFF(p1,p2) ((ptrdiff_t)(((char *)(p1)) - (char *)(p2))) typedef int BOOL; /* limiting size of ipc replies */ #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024)) /* Samba needs type definitions for int16, int32, uint16 and uint32. Normally these are signed and unsigned 16 and 32 bit integers, but they actually only need to be at least 16 and 32 bits respectively. Thus if your word size is 8 bytes just defining them as signed and unsigned int will work. */ /* afs/stds.h defines int16 and int32 */ #ifndef AFS_AUTH typedef short int16; typedef int int32; #endif #ifndef uint8 typedef unsigned char uint8; #endif #ifndef uint16 typedef unsigned short uint16; #endif #ifndef uint32 typedef unsigned int uint32; #endif #ifndef uchar #define uchar unsigned char #endif #ifndef int16 #define int16 short #endif #ifndef uint16 #define uint16 unsigned short #endif #ifndef uint32 #define uint32 unsigned int #endif #define SIZEOFWORD 2 #ifndef DEF_CREATE_MASK #define DEF_CREATE_MASK (0755) #endif /* how long to wait for secondary SMB packets (milli-seconds) */ #define SMB_SECONDARY_WAIT (60*1000) /* debugging code */ #ifndef SYSLOG #define DEBUG(level,body) ((DEBUGLEVEL>=(level))?(Debug1 body):0) #else extern int syslog_level; #define DEBUG(level,body) ((DEBUGLEVEL>=(level))? (syslog_level = (level), Debug1 body):0) #endif /* this defines the error codes that receive_smb can put in smb_read_error */ #define READ_TIMEOUT 1 #define READ_EOF 2 #define READ_ERROR 3 #define DIR_STRUCT_SIZE 43 /* these define all the command types recognised by the server - there are lots of gaps so probably there are some rare commands that are not implemented */ #define pSETDIR '\377' /* these define the attribute byte as seen by DOS */ #define aRONLY (1L<<0) #define aHIDDEN (1L<<1) #define aSYSTEM (1L<<2) #define aVOLID (1L<<3) #define aDIR (1L<<4) #define aARCH (1L<<5) /* deny modes */ #define DENY_DOS 0 #define DENY_ALL 1 #define DENY_WRITE 2 #define DENY_READ 3 #define DENY_NONE 4 #define DENY_FCB 7 /* share types */ #define STYPE_DISKTREE 0 /* Disk drive */ #define STYPE_PRINTQ 1 /* Spooler queue */ #define STYPE_DEVICE 2 /* Serial device */ #define STYPE_IPC 3 /* Interprocess communication (IPC) */ #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */ /* SMB X/Open error codes for the ERRdos error class */ #define ERRbadfunc 1 /* Invalid function (or system call) */ #define ERRbadfile 2 /* File not found (pathname error) */ #define ERRbadpath 3 /* Directory not found */ #define ERRnofids 4 /* Too many open files */ #define ERRnoaccess 5 /* Access denied */ #define ERRbadfid 6 /* Invalid fid */ #define ERRnomem 8 /* Out of memory */ #define ERRbadmem 9 /* Invalid memory block address */ #define ERRbadenv 10 /* Invalid environment */ #define ERRbadaccess 12 /* Invalid open mode */ #define ERRbaddata 13 /* Invalid data (only from ioctl call) */ #define ERRres 14 /* reserved */ #define ERRbaddrive 15 /* Invalid drive */ #define ERRremcd 16 /* Attempt to delete current directory */ #define ERRdiffdevice 17 /* rename/move across different filesystems */ #define ERRnofiles 18 /* no more files found in file search */ #define ERRbadshare 32 /* Share mode on file conflict with open mode */ #define ERRlock 33 /* Lock request conflicts with existing lock */ #define ERRfilexists 80 /* File in operation already exists */ #define ERRcannotopen 110 /* Cannot open the file specified */ #define ERRunknownlevel 124 #define ERRbadpipe 230 /* Named pipe invalid */ #define ERRpipebusy 231 /* All instances of pipe are busy */ #define ERRpipeclosing 232 /* named pipe close in progress */ #define ERRnotconnected 233 /* No process on other end of named pipe */ #define ERRmoredata 234 /* More data to be returned */ #define ERRbaddirectory 267 /* Invalid directory name in a path. */ #define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */ #define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not supported */ #define ERRunknownipc 2142 /* here's a special one from observing NT */ #define ERRnoipc 66 /* don't support ipc */ /* Error codes for the ERRSRV class */ #define ERRerror 1 /* Non specific error code */ #define ERRbadpw 2 /* Bad password */ #define ERRbadtype 3 /* reserved */ #define ERRaccess 4 /* No permissions to do the requested operation */ #define ERRinvnid 5 /* tid invalid */ #define ERRinvnetname 6 /* Invalid servername */ #define ERRinvdevice 7 /* Invalid device */ #define ERRqfull 49 /* Print queue full */ #define ERRqtoobig 50 /* Queued item too big */ #define ERRinvpfid 52 /* Invalid print file in smb_fid */ #define ERRsmbcmd 64 /* Unrecognised command */ #define ERRsrverror 65 /* smb server internal error */ #define ERRfilespecs 67 /* fid and pathname invalid combination */ #define ERRbadlink 68 /* reserved */ #define ERRbadpermits 69 /* Access specified for a file is not valid */ #define ERRbadpid 70 /* reserved */ #define ERRsetattrmode 71 /* attribute mode invalid */ #define ERRpaused 81 /* Message server paused */ #define ERRmsgoff 82 /* Not receiving messages */ #define ERRnoroom 83 /* No room for message */ #define ERRrmuns 87 /* too many remote usernames */ #define ERRtimeout 88 /* operation timed out */ #define ERRnoresource 89 /* No resources currently available for request. */ #define ERRtoomanyuids 90 /* too many userids */ #define ERRbaduid 91 /* bad userid */ #define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */ #define ERRuseSTD 251 /* temporarily unable to use raw mode, use standard mode */ #define ERRcontMPX 252 /* resume MPX mode */ #define ERRbadPW /* reserved */ #define ERRnosupport 0xFFFF #define ERRunknownsmb 22 /* from NT 3.5 response */ /* Error codes for the ERRHRD class */ #define ERRnowrite 19 /* read only media */ #define ERRbadunit 20 /* Unknown device */ #define ERRnotready 21 /* Drive not ready */ #define ERRbadcmd 22 /* Unknown command */ #define ERRdata 23 /* Data (CRC) error */ #define ERRbadreq 24 /* Bad request structure length */ #define ERRseek 25 #define ERRbadmedia 26 #define ERRbadsector 27 #define ERRnopaper 28 #define ERRwrite 29 /* write fault */ #define ERRread 30 /* read fault */ #define ERRgeneral 31 /* General hardware failure */ #define ERRwrongdisk 34 #define ERRFCBunavail 35 #define ERRsharebufexc 36 /* share buffer exceeded */ #define ERRdiskfull 39 typedef char pstring[1024]; typedef char fstring[128]; /* pipe strings */ #define PIPE_LANMAN "\\PIPE\\LANMAN" #define PIPE_SRVSVC "\\PIPE\\srvsvc" #define PIPE_SAMR "\\PIPE\\samr" #define PIPE_WKSSVC "\\PIPE\\wkssvc" #define PIPE_NETLOGON "\\PIPE\\NETLOGON" #define PIPE_NTLSA "\\PIPE\\ntlsa" #define PIPE_NTSVCS "\\PIPE\\ntsvcs" #define PIPE_LSASS "\\PIPE\\lsass" #define PIPE_LSARPC "\\PIPE\\lsarpc" /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */ typedef struct nttime_info { uint32 low; uint32 high; } NTTIME; /* Allowable account control bits */ #define ACB_DISABLED 0x0001 /* 1 = User account disabled */ #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */ #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */ #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */ #define ACB_NORMAL 0x0010 /* 1 = Normal user account */ #define ACB_MNS 0x0020 /* 1 = MNS logon user account */ #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */ #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */ #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */ #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */ #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */ #define MAX_HOURS_LEN 32 struct sam_passwd { time_t logon_time; /* logon time */ time_t logoff_time; /* logoff time */ time_t kickoff_time; /* kickoff time */ time_t pass_last_set_time; /* password last set time */ time_t pass_can_change_time; /* password can change time */ time_t pass_must_change_time; /* password must change time */ char *smb_name; /* username string */ char *full_name; /* user's full name string */ char *home_dir; /* home directory string */ char *dir_drive; /* home directory drive string */ char *logon_script; /* logon script string */ char *profile_path; /* profile path string */ char *acct_desc ; /* user description string */ char *workstations; /* login from workstations string */ char *unknown_str ; /* don't know what this is, yet. */ char *munged_dial ; /* munged path name and dial-back tel number */ int smb_userid; /* this is actually the unix uid_t */ int smb_grpid; /* this is actually the unix gid_t */ uint32 user_rid; /* Primary User ID */ uint32 group_rid; /* Primary Group ID */ unsigned char *smb_passwd; /* Null if no password */ unsigned char *smb_nt_passwd; /* Null if no password */ uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */ uint32 unknown_3; /* 0x00ff ffff */ uint16 logon_divs; /* 168 - number of hours in a week */ uint32 hours_len; /* normally 21 bytes */ uint8 hours[MAX_HOURS_LEN]; uint32 unknown_5; /* 0x0002 0000 */ uint32 unknown_6; /* 0x0000 04ec */ }; struct smb_passwd { int smb_userid; /* this is actually the unix uid_t */ char *smb_name; /* username string */ unsigned char *smb_passwd; /* Null if no password */ unsigned char *smb_nt_passwd; /* Null if no password */ uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */ time_t pass_last_set_time; /* password last set time */ }; struct sam_disp_info { uint32 user_rid; /* Primary User ID */ char *smb_name; /* username string */ char *full_name; /* user's full name string */ }; /* DOM_CHAL - challenge info */ typedef struct chal_info { uchar data[8]; /* credentials */ } DOM_CHAL; /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */ typedef struct time_info { uint32 time; } UTIME; /* DOM_CREDs - timestamped client or server credentials */ typedef struct cred_info { DOM_CHAL challenge; /* credentials */ UTIME timestamp; /* credential time-stamp */ } DOM_CRED; struct cli_state { int fd; int cnum; int pid; int mid; int uid; int protocol; int sec_mode; int rap_error; int privilages; fstring eff_name; fstring desthost; char cryptkey[8]; uint32 sesskey; int serverzone; uint32 servertime; int readbraw_supported; int writebraw_supported; int timeout; int max_xmit; char *outbuf; char *inbuf; int bufsize; int initialised; /* * Only used in NT domain calls. */ uint32 nt_error; /* NT RPC error code. */ uint16 nt_pipe_fnum; /* Pipe handle. */ unsigned char sess_key[16]; /* Current session key. */ DOM_CRED clnt_cred; /* Client credential. */ fstring mach_acct; /* MYNAME$. */ fstring srv_name_slash; /* \\remote server. */ fstring clnt_name_slash; /* \\local client. */ }; struct current_user { int cnum, vuid; int uid, gid; int ngroups; gid_t *groups; int *igroups; int *attrs; }; typedef struct { int size; int mode; int uid; int gid; /* these times are normally kept in GMT */ time_t mtime; time_t atime; time_t ctime; pstring name; } file_info; /* Structure used when SMBwritebmpx is active */ typedef struct { int wr_total_written; /* So we know when to discard this */ int32 wr_timeout; int32 wr_errclass; int32 wr_error; /* Cached errors */ BOOL wr_mode; /* write through mode) */ BOOL wr_discard; /* discard all further data */ } write_bmpx_struct; /* * Structure used to indirect fd's from the files_struct. * Needed as POSIX locking is based on file and process, not * file descriptor and process. */ typedef struct { uint16 ref_count; uint16 uid_cache_count; uid_t uid_users_cache[10]; uint32 dev; uint32 inode; int fd; int fd_readonly; int fd_writeonly; int real_open_flags; } file_fd_struct; typedef struct { int cnum; file_fd_struct *fd_ptr; int pos; uint32 size; int mode; int vuid; char *mmap_ptr; uint32 mmap_size; write_bmpx_struct *wbmpx_ptr; struct timeval open_time; BOOL open; BOOL can_lock; BOOL can_read; BOOL can_write; BOOL share_mode; BOOL print_file; BOOL modified; BOOL granted_oplock; BOOL sent_oplock_break; BOOL reserved; char *name; } files_struct; struct uid_cache { int entries; int list[UID_CACHE_SIZE]; }; typedef struct { char *name; BOOL is_wild; } name_compare_entry; typedef struct { int service; BOOL force_user; struct uid_cache uid_cache; void *dirptr; BOOL open; BOOL printer; BOOL ipc; BOOL read_only; BOOL admin_user; char *dirpath; char *connectpath; char *origpath; char *user; /* name of user who *opened* this connection */ int uid; /* uid of user who *opened* this connection */ int gid; /* gid of user who *opened* this connection */ uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */ /* following groups stuff added by ih */ /* This groups info is valid for the user that *opened* the connection */ int ngroups; gid_t *groups; int *igroups; /* an integer version - some OSes are broken :-( */ int *attrs; time_t lastused; BOOL used; int num_files_open; name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */ name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */ name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */ } connection_struct; /* Domain controller authentication protocol info */ struct dcinfo { DOM_CHAL clnt_chal; /* Initial challenge received from client */ DOM_CHAL srv_chal; /* Initial server challenge */ DOM_CRED clnt_cred; /* Last client credential */ DOM_CRED srv_cred; /* Last server credential */ uchar sess_key[8]; /* Session key */ uchar md4pw[16]; /* md4(machine password) */ }; typedef struct { int uid; /* uid of a validated user */ int gid; /* gid of a validated user */ fstring requested_name; /* user name from the client */ fstring name; /* unix user name of a validated user */ fstring real_name; /* to store real name from password file - simeon */ BOOL guest; /* following groups stuff added by ih */ /* This groups info is needed for when we become_user() for this uid */ int n_groups; gid_t *groups; int *igroups; /* an integer version - some OSes are broken :-( */ int *attrs; /* attributes associated with each gid */ int n_sids; int *sids; /* per-user authentication information on NT RPCs */ struct dcinfo dc; } user_struct; enum {LPQ_QUEUED,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING}; typedef struct { int job; int size; int status; int priority; time_t time; char user[30]; char file[100]; } print_queue_struct; enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR}; typedef struct { fstring message; int status; } print_status_struct; /* used for server information: client, nameserv and ipc */ struct server_info_struct { fstring name; uint32 type; fstring comment; fstring domain; /* used ONLY in ipc.c NOT namework.c */ BOOL server_added; /* used ONLY in ipc.c NOT namework.c */ }; /* used for network interfaces */ struct interface { struct interface *next; struct in_addr ip; struct in_addr bcast; struct in_addr nmask; }; /* struct returned by get_share_modes */ typedef struct { int pid; uint16 op_port; uint16 op_type; int share_mode; struct timeval time; } share_mode_entry; /* each implementation of the share mode code needs to support the following operations */ struct share_ops { BOOL (*stop_mgmt)(void); BOOL (*lock_entry)(int , uint32 , uint32 , int *); BOOL (*unlock_entry)(int , uint32 , uint32 , int ); int (*get_entries)(int , int , uint32 , uint32 , share_mode_entry **); void (*del_entry)(int , int ); BOOL (*set_entry)(int , int , uint16 , uint16 ); BOOL (*remove_oplock)(int , int); int (*forall)(void (*)(share_mode_entry *, char *)); void (*status)(FILE *); }; /* each implementation of the shared memory code needs to support the following operations */ struct shmem_ops { BOOL (*shm_close)( void ); int (*shm_alloc)(int ); BOOL (*shm_free)(int ); int (*get_userdef_off)(void); void *(*offset2addr)(int ); int (*addr2offset)(void *addr); BOOL (*lock_hash_entry)(unsigned int); BOOL (*unlock_hash_entry)( unsigned int ); BOOL (*get_usage)(int *,int *,int *); unsigned (*hash_size)(void); }; /* * Each implementation of the password database code needs * to support the following operations. */ struct passdb_ops { /* * Password database ops. */ void *(*startsmbpwent)(BOOL); void (*endsmbpwent)(void *); unsigned long (*getsmbpwpos)(void *); BOOL (*setsmbpwpos)(void *, unsigned long); /* * smb password database query functions. */ struct smb_passwd *(*getsmbpwnam)(char *); struct smb_passwd *(*getsmbpwuid)(uid_t); struct smb_passwd *(*getsmbpwent)(void *); /* * smb password database modification functions. */ BOOL (*add_smbpwd_entry)(struct smb_passwd *); BOOL (*mod_smbpwd_entry)(struct smb_passwd *, BOOL); /* * Functions that manupulate a struct sam_passwd. */ struct sam_passwd *(*getsam21pwent)(void *); /* * sam password database query functions. */ struct sam_passwd *(*getsam21pwnam)(char *); struct sam_passwd *(*getsam21pwuid)(uid_t); struct sam_passwd *(*getsam21pwrid)(uint32); /* * sam password database modification functions. */ BOOL (*add_sam21pwd_entry)(struct sam_passwd *); BOOL (*mod_sam21pwd_entry)(struct sam_passwd *, BOOL); /* * sam query display info functions. */ struct sam_disp_info *(*getsamdispnam)(char *); struct sam_disp_info *(*getsamdisprid)(uint32); struct sam_disp_info *(*getsamdispent)(void *); #if 0 /* * password checking functions */ struct smb_passwd *(*smb_password_chal )(char *username, char lm_pass[24], char nt_pass[24], char chal[8]); struct smb_passwd *(*smb_password_check )(char *username, char lm_hash[16], char nt_hash[16], struct passwd *(*unix_password_check)(char *username, char *pass, int pass_len); #endif }; /* this is used for smbstatus */ struct connect_record { int magic; int pid; int cnum; int uid; int gid; char name[24]; char addr[24]; char machine[128]; time_t start; }; /* This is used by smbclient to send it to a smbfs mount point */ struct connection_options { int protocol; /* Connection-Options */ uint32 max_xmit; uint16 server_uid; uint16 tid; /* The following are LANMAN 1.0 options */ uint16 sec_mode; uint16 max_mux; uint16 max_vcs; uint16 rawmode; uint32 sesskey; /* The following are NT LM 0.12 options */ uint32 maxraw; uint32 capabilities; uint16 serverzone; }; /* the following are used by loadparm for option lists */ typedef enum { P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL, P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP } parm_type; typedef enum { P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE } parm_class; struct enum_list { int value; char *name; }; struct parm_struct { char *label; parm_type type; parm_class class; void *ptr; BOOL (*special)(char *, char **); struct enum_list *enum_list; unsigned flags; union { BOOL bvalue; int ivalue; char *svalue; char cvalue; } def; }; #define FLAG_BASIC 1 /* fundamental options */ #define FLAG_HIDE 2 /* options that should be hidden in SWAT */ #define FLAG_PRINT 4 /* printing options */ #define FLAG_GLOBAL 8 /* local options that should be globally settable in SWAT */ #ifndef LOCKING_VERSION #define LOCKING_VERSION 4 #endif /* LOCKING_VERSION */ /* these are useful macros for checking validity of handles */ #define VALID_FNUM(fnum) (((fnum) >= 0) && ((fnum) < MAX_OPEN_FILES)) #define OPEN_FNUM(fnum) (VALID_FNUM(fnum) && Files[fnum].open) #define VALID_CNUM(cnum) (((cnum) >= 0) && ((cnum) < MAX_CONNECTIONS)) #define OPEN_CNUM(cnum) (VALID_CNUM(cnum) && Connections[cnum].open) #define IS_IPC(cnum) (VALID_CNUM(cnum) && Connections[cnum].ipc) #define IS_PRINT(cnum) (VALID_CNUM(cnum) && Connections[cnum].printer) #define FNUM_OK(fnum,c) (OPEN_FNUM(fnum) && (c)==Files[fnum].cnum) #define CHECK_FNUM(fnum,c) if (!FNUM_OK(fnum,c)) \ return(ERROR(ERRDOS,ERRbadfid)) #define CHECK_READ(fnum) if (!Files[fnum].can_read) \ return(ERROR(ERRDOS,ERRbadaccess)) #define CHECK_WRITE(fnum) if (!Files[fnum].can_write) \ return(ERROR(ERRDOS,ERRbadaccess)) #define CHECK_ERROR(fnum) if (HAS_CACHED_ERROR(fnum)) \ return(CACHED_ERROR(fnum)) /* translates a connection number into a service number */ #define SNUM(cnum) (Connections[cnum].service) /* access various service details */ #define SERVICE(snum) (lp_servicename(snum)) #define PRINTCAP (lp_printcapname()) #define PRINTCOMMAND(snum) (lp_printcommand(snum)) #define PRINTERNAME(snum) (lp_printername(snum)) #define CAN_WRITE(cnum) (OPEN_CNUM(cnum) && !Connections[cnum].read_only) #define VALID_SNUM(snum) (lp_snum_ok(snum)) #define GUEST_OK(snum) (VALID_SNUM(snum) && lp_guest_ok(snum)) #define GUEST_ONLY(snum) (VALID_SNUM(snum) && lp_guest_only(snum)) #define CAN_SETDIR(snum) (!lp_no_set_dir(snum)) #define CAN_PRINT(cnum) (OPEN_CNUM(cnum) && lp_print_ok(SNUM(cnum))) #define POSTSCRIPT(cnum) (OPEN_CNUM(cnum) && lp_postscript(SNUM(cnum))) #define MAP_HIDDEN(cnum) (OPEN_CNUM(cnum) && lp_map_hidden(SNUM(cnum))) #define MAP_SYSTEM(cnum) (OPEN_CNUM(cnum) && lp_map_system(SNUM(cnum))) #define MAP_ARCHIVE(cnum) (OPEN_CNUM(cnum) && lp_map_archive(SNUM(cnum))) #define IS_HIDDEN_PATH(cnum,path) (is_in_path((path),Connections[(cnum)].hide_list)) #define IS_VETO_PATH(cnum,path) (is_in_path((path),Connections[(cnum)].veto_list)) #define IS_VETO_OPLOCK_PATH(cnum,path) (is_in_path((path),Connections[(cnum)].veto_oplock_list)) #define SMBENCRYPT() (lp_encrypted_passwords()) /* the basic packet size, assuming no words or bytes */ #define smb_size 39 /* offsets into message for common items */ #define smb_com 8 #define smb_rcls 9 #define smb_reh 10 #define smb_err 11 #define smb_flg 13 #define smb_flg2 14 #define smb_reb 13 #define smb_tid 28 #define smb_pid 30 #define smb_uid 32 #define smb_mid 34 #define smb_wct 36 #define smb_vwv 37 #define smb_vwv0 37 #define smb_vwv1 39 #define smb_vwv2 41 #define smb_vwv3 43 #define smb_vwv4 45 #define smb_vwv5 47 #define smb_vwv6 49 #define smb_vwv7 51 #define smb_vwv8 53 #define smb_vwv9 55 #define smb_vwv10 57 #define smb_vwv11 59 #define smb_vwv12 61 #define smb_vwv13 63 #define smb_vwv14 65 #define smb_vwv15 67 #define smb_vwv16 69 #define smb_vwv17 71 /* the complete */ #define SMBmkdir 0x00 /* create directory */ #define SMBrmdir 0x01 /* delete directory */ #define SMBopen 0x02 /* open file */ #define SMBcreate 0x03 /* create file */ #define SMBclose 0x04 /* close file */ #define SMBflush 0x05 /* flush file */ #define SMBunlink 0x06 /* delete file */ #define SMBmv 0x07 /* rename file */ #define SMBgetatr 0x08 /* get file attributes */ #define SMBsetatr 0x09 /* set file attributes */ #define SMBread 0x0A /* read from file */ #define SMBwrite 0x0B /* write to file */ #define SMBlock 0x0C /* lock byte range */ #define SMBunlock 0x0D /* unlock byte range */ #define SMBctemp 0x0E /* create temporary file */ #define SMBmknew 0x0F /* make new file */ #define SMBchkpth 0x10 /* check directory path */ #define SMBexit 0x11 /* process exit */ #define SMBlseek 0x12 /* seek */ #define SMBtcon 0x70 /* tree connect */ #define SMBtconX 0x75 /* tree connect and X*/ #define SMBtdis 0x71 /* tree disconnect */ #define SMBnegprot 0x72 /* negotiate protocol */ #define SMBdskattr 0x80 /* get disk attributes */ #define SMBsearch 0x81 /* search directory */ #define SMBsplopen 0xC0 /* open print spool file */ #define SMBsplwr 0xC1 /* write to print spool file */ #define SMBsplclose 0xC2 /* close print spool file */ #define SMBsplretq 0xC3 /* return print queue */ #define SMBsends 0xD0 /* send single block message */ #define SMBsendb 0xD1 /* send broadcast message */ #define SMBfwdname 0xD2 /* forward user name */ #define SMBcancelf 0xD3 /* cancel forward */ #define SMBgetmac 0xD4 /* get machine name */ #define SMBsendstrt 0xD5 /* send start of multi-block message */ #define SMBsendend 0xD6 /* send end of multi-block message */ #define SMBsendtxt 0xD7 /* send text of multi-block message */ /* Core+ protocol */ #define SMBlockread 0x13 /* Lock a range and read */ #define SMBwriteunlock 0x14 /* Unlock a range then write */ #define SMBreadbraw 0x1a /* read a block of data with no smb header */ #define SMBwritebraw 0x1d /* write a block of data with no smb header */ #define SMBwritec 0x20 /* secondary write request */ #define SMBwriteclose 0x2c /* write a file then close it */ /* dos extended protocol */ #define SMBreadBraw 0x1A /* read block raw */ #define SMBreadBmpx 0x1B /* read block multiplexed */ #define SMBreadBs 0x1C /* read block (secondary response) */ #define SMBwriteBraw 0x1D /* write block raw */ #define SMBwriteBmpx 0x1E /* write block multiplexed */ #define SMBwriteBs 0x1F /* write block (secondary request) */ #define SMBwriteC 0x20 /* write complete response */ #define SMBsetattrE 0x22 /* set file attributes expanded */ #define SMBgetattrE 0x23 /* get file attributes expanded */ #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */ #define SMBtrans 0x25 /* transaction - name, bytes in/out */ #define SMBtranss 0x26 /* transaction (secondary request/response) */ #define SMBioctl 0x27 /* IOCTL */ #define SMBioctls 0x28 /* IOCTL (secondary request/response) */ #define SMBcopy 0x29 /* copy */ #define SMBmove 0x2A /* move */ #define SMBecho 0x2B /* echo */ #define SMBopenX 0x2D /* open and X */ #define SMBreadX 0x2E /* read and X */ #define SMBwriteX 0x2F /* write and X */ #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */ #define SMBffirst 0x82 /* find first */ #define SMBfunique 0x83 /* find unique */ #define SMBfclose 0x84 /* find close */ #define SMBinvalid 0xFE /* invalid command */ /* Extended 2.0 protocol */ #define SMBtrans2 0x32 /* TRANS2 protocol set */ #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */ #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */ #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */ #define SMBulogoffX 0x74 /* user logoff */ /* NT SMB extensions. */ #define SMBnttrans 0xA0 /* NT transact */ #define SMBnttranss 0xA1 /* NT transact secondary */ #define SMBntcreateX 0xA2 /* NT create and X */ #define SMBntcancel 0xA4 /* NT cancel */ /* These are the TRANS2 sub commands */ #define TRANSACT2_OPEN 0 #define TRANSACT2_FINDFIRST 1 #define TRANSACT2_FINDNEXT 2 #define TRANSACT2_QFSINFO 3 #define TRANSACT2_SETFSINFO 4 #define TRANSACT2_QPATHINFO 5 #define TRANSACT2_SETPATHINFO 6 #define TRANSACT2_QFILEINFO 7 #define TRANSACT2_SETFILEINFO 8 #define TRANSACT2_FSCTL 9 #define TRANSACT2_IOCTL 0xA #define TRANSACT2_FINDNOTIFYFIRST 0xB #define TRANSACT2_FINDNOTIFYNEXT 0xC #define TRANSACT2_MKDIR 0xD #define TRANSACT2_SESSION_SETUP 0xE #define TRANSACT2_GET_DFS_REFERRAL 0x10 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11 /* These are the NT transact sub commands. */ #define NT_TRANSACT_CREATE 1 #define NT_TRANSACT_IOCTL 2 #define NT_TRANSACT_SET_SECURITY_DESC 3 #define NT_TRANSACT_NOTIFY_CHANGE 4 #define NT_TRANSACT_RENAME 5 #define NT_TRANSACT_QUERY_SECURITY_DESC 6 /* these are the trans2 sub fields for primary requests */ #define smb_tpscnt smb_vwv0 #define smb_tdscnt smb_vwv1 #define smb_mprcnt smb_vwv2 #define smb_mdrcnt smb_vwv3 #define smb_msrcnt smb_vwv4 #define smb_flags smb_vwv5 #define smb_timeout smb_vwv6 #define smb_pscnt smb_vwv9 #define smb_psoff smb_vwv10 #define smb_dscnt smb_vwv11 #define smb_dsoff smb_vwv12 #define smb_suwcnt smb_vwv13 #define smb_setup smb_vwv14 #define smb_setup0 smb_setup #define smb_setup1 (smb_setup+2) #define smb_setup2 (smb_setup+4) /* these are for the secondary requests */ #define smb_spscnt smb_vwv2 #define smb_spsoff smb_vwv3 #define smb_spsdisp smb_vwv4 #define smb_sdscnt smb_vwv5 #define smb_sdsoff smb_vwv6 #define smb_sdsdisp smb_vwv7 #define smb_sfid smb_vwv8 /* and these for responses */ #define smb_tprcnt smb_vwv0 #define smb_tdrcnt smb_vwv1 #define smb_prcnt smb_vwv3 #define smb_proff smb_vwv4 #define smb_prdisp smb_vwv5 #define smb_drcnt smb_vwv6 #define smb_droff smb_vwv7 #define smb_drdisp smb_vwv8 /* these are for the NT trans primary request. */ #define smb_nt_MaxSetupCount smb_vwv0 #define smb_nt_Flags (smb_vwv0 + 1) #define smb_nt_TotalParameterCount (smb_vwv0 + 3) #define smb_nt_TotalDataCount (smb_vwv0 + 7) #define smb_nt_MaxParameterCount (smb_vwv0 + 11) #define smb_nt_MaxDataCount (smb_vwv0 + 15) #define smb_nt_ParameterCount (smb_vwv0 + 19) #define smb_nt_ParameterOffset (smb_vwv0 + 23) #define smb_nt_DataCount (smb_vwv0 + 27) #define smb_nt_DataOffset (smb_vwv0 + 31) #define smb_nt_SetupCount (smb_vwv0 + 35) #define smb_nt_Function (smb_vwv0 + 36) #define smb_nt_SetupStart (smb_vwv0 + 39) /* these are for the NT trans secondary request. */ #define smb_nts_TotalParameterCount (smb_vwv0 + 3) #define smb_nts_TotalDataCount (smb_vwv0 + 7) #define smb_nts_ParameterCount (smb_vwv0 + 11) #define smb_nts_ParameterOffset (smb_vwv0 + 15) #define smb_nts_ParameterDisplacement (smb_vwv0 + 19) #define smb_nts_DataCount (smb_vwv0 + 23) #define smb_nts_DataOffset (smb_vwv0 + 27) #define smb_nts_DataDisplacement (smb_vwv0 + 31) /* these are for the NT create_and_X */ #define smb_ntcreate_NameLength (smb_vwv0 + 5) #define smb_ntcreate_Flags (smb_vwv0 + 7) #define smb_ntcreate_RootDirectoryFid (smb_wvw0 + 11) #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15) #define smb_ntcreate_AllocationSize (smb_vwv0 + 19) #define smb_ntcreate_FileAttributes (smb_vwv0 + 27) #define smb_ntcreate_ShareAccess (smb_vwv0 + 31) #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35) #define smb_ntcreate_CreateOptions (smb_vwv0 + 39) #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43) #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47) /* these are the constants used in the above call. */ /* DesiredAccess */ #if 0 /* TODO.... JRA */ #define SPECIFIC_RIGHTS_MASK 0x00FFFFL #define STANDARD_RIGHTS_MASK 0xFF0000L #define DELETE_ACCESS (1L<<16) #define READ_CONTROL_ACCESS (1L<<17) #define WRITE_DAC_ACCESS (1L<<18) #define WRITE_OWNER_ACCESS (1L<<19) #define SYNCHRONIZE_ACCESS (1L<<20) #define SYSTEM_SECURITY_ACCESS (1L<<24) #define GENERIC_READ xxx? #define GENERIC_WRITE xxx? #endif /* Flags field. */ #define REQUEST_OPLOCK 2 #define REQUEST_BATCH_OPLOCK 4 #define OPEN_DIRECTORY 8 /* ShareAccess field. */ #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */ #define FILE_SHARE_READ 1 #define FILE_SHARE_WRITE 2 #define FILE_SHARE_DELETE 4 /* FileAttributesField */ #define FILE_ATTRIBUTE_READONLY aRONLY #define FILE_ATTRIBUTE_HIDDEN aHIDDEN #define FILE_ATTRIBUTE_SYSTEM aSYSTEM #define FILE_ATTRIBUTE_DIRECTORY aDIR #define FILE_ATTRIBUTE_ARCHIVE aARCH #define FILE_ATTRIBUTE_NORMAL 0x80L #define FILE_ATTRIBUTE_TEMPORARY 0x100L #define FILE_ATTRIBUTE_COMPRESSED 0x800L /* Flags - combined with attributes. */ #define FILE_FLAG_WRITE_THROUGH 0x80000000L #define FILE_FLAG_NO_BUFFERING 0x20000000L #define FILE_FLAG_RANDOM_ACCESS 0x10000000L #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L /* CreateDisposition field. */ #define CREATE_NEW 1 #define CREATE_ALWAYS 2 #define OPEN_EXISTING 3 #define OPEN_ALWAYS 4 #define TRUNCATE_EXISTING 5 /* where to find the base of the SMB packet proper */ #define smb_base(buf) (((char *)(buf))+4) #define SMB_SUCCESS 0 /* The request was successful. */ #define ERRDOS 0x01 /* Error is from the core DOS operating system set. */ #define ERRSRV 0x02 /* Error is generated by the server network file manager.*/ #define ERRHRD 0x03 /* Error is an hardware error. */ #define ERRCMD 0xFF /* Command was not in the "SMB" format. */ #ifdef __STDC__ int Debug1(char *, ...); int slprintf(char *str, int n, char *format, ...); #else int Debug1(); int slprintf(); #endif #ifdef DFS_AUTH void dfs_unlogin(void); extern int dcelogin_atmost_once; #endif #if AJT void ajt_panic(void); #endif #ifdef NOSTRDUP char *strdup(char *s); #endif #ifdef REPLACE_STRLEN int Strlen(char *); #endif #ifdef REPLACE_STRSTR char *Strstr(char *s, char *p); #endif #ifndef MIN #define MIN(a,b) ((a)<(b)?(a):(b)) #endif #ifndef MAX #define MAX(a,b) ((a)>(b)?(a):(b)) #endif #ifndef ABS #define ABS(a) ((a)>0?(a):(-(a))) #endif #ifndef SIGNAL_CAST #define SIGNAL_CAST #endif #ifndef SELECT_CAST #define SELECT_CAST #endif /* Some POSIX definitions for those without */ #ifndef S_IFDIR #define S_IFDIR 0x4000 #endif #ifndef S_ISDIR #define S_ISDIR(mode) ((mode & 0xF000) == S_IFDIR) #endif #ifndef S_IRWXU #define S_IRWXU 00700 /* read, write, execute: owner */ #endif #ifndef S_IRUSR #define S_IRUSR 00400 /* read permission: owner */ #endif #ifndef S_IWUSR #define S_IWUSR 00200 /* write permission: owner */ #endif #ifndef S_IXUSR #define S_IXUSR 00100 /* execute permission: owner */ #endif #ifndef S_IRWXG #define S_IRWXG 00070 /* read, write, execute: group */ #endif #ifndef S_IRGRP #define S_IRGRP 00040 /* read permission: group */ #endif #ifndef S_IWGRP #define S_IWGRP 00020 /* write permission: group */ #endif #ifndef S_IXGRP #define S_IXGRP 00010 /* execute permission: group */ #endif #ifndef S_IRWXO #define S_IRWXO 00007 /* read, write, execute: other */ #endif #ifndef S_IROTH #define S_IROTH 00004 /* read permission: other */ #endif #ifndef S_IWOTH #define S_IWOTH 00002 /* write permission: other */ #endif #ifndef S_IXOTH #define S_IXOTH 00001 /* execute permission: other */ #endif /* these are used in NetServerEnum to choose what to receive */ #define SV_TYPE_WORKSTATION 0x00000001 #define SV_TYPE_SERVER 0x00000002 #define SV_TYPE_SQLSERVER 0x00000004 #define SV_TYPE_DOMAIN_CTRL 0x00000008 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010 #define SV_TYPE_TIME_SOURCE 0x00000020 #define SV_TYPE_AFP 0x00000040 #define SV_TYPE_NOVELL 0x00000080 #define SV_TYPE_DOMAIN_MEMBER 0x00000100 #define SV_TYPE_PRINTQ_SERVER 0x00000200 #define SV_TYPE_DIALIN_SERVER 0x00000400 #define SV_TYPE_SERVER_UNIX 0x00000800 #define SV_TYPE_NT 0x00001000 #define SV_TYPE_WFW 0x00002000 #define SV_TYPE_SERVER_MFPN 0x00004000 #define SV_TYPE_SERVER_NT 0x00008000 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000 #define SV_TYPE_BACKUP_BROWSER 0x00020000 #define SV_TYPE_MASTER_BROWSER 0x00040000 #define SV_TYPE_DOMAIN_MASTER 0x00080000 #define SV_TYPE_SERVER_OSF 0x00100000 #define SV_TYPE_SERVER_VMS 0x00200000 #define SV_TYPE_WIN95_PLUS 0x00400000 #define SV_TYPE_ALTERNATE_XPORT 0x20000000 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000 #define SV_TYPE_DOMAIN_ENUM 0x80000000 #define SV_TYPE_ALL 0xFFFFFFFF /* what server type are we currently - JHT Says we ARE 4.20 */ /* this was set by JHT in liaison with Jeremy Allison early 1997 */ /* setting to 4.20 at same time as announcing ourselves as NT Server */ /* History: */ /* Version 4.0 - never made public */ /* Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9 */ /* - Reappeared in 1.9.16p11 with fixed smbd services */ /* Version 4.20 - To indicate that nmbd and browsing now works better */ #define DEFAULT_MAJOR_VERSION 0x04 #define DEFAULT_MINOR_VERSION 0x02 /* Browser Election Values */ #define BROWSER_ELECTION_VERSION 0x010f #define BROWSER_CONSTANT 0xaa55 /* NT Flags2 bits - cifs6.txt section 3.1.2 */ #define FLAGS2_LONG_PATH_COMPONENTS 0x0001 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002 #define FLAGS2_DFS_PATHNAMES 0x1000 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000 #define FLAGS2_32_BIT_ERROR_CODES 0x4000 #define FLAGS2_UNICODE_STRINGS 0x8000 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */ #define CAP_RAW_MODE 0x0001 #define CAP_MPX_MODE 0x0002 #define CAP_UNICODE 0x0004 #define CAP_LARGE_FILES 0x0008 #define CAP_NT_SMBS 0x0010 #define CAP_RPC_REMOTE_APIS 0x0020 #define CAP_STATUS32 0x0040 #define CAP_LEVEL_II_OPLOCKS 0x0080 #define CAP_LOCK_AND_READ 0x0100 #define CAP_NT_FIND 0x0200 #define CAP_DFS 0x1000 #define CAP_LARGE_READX 0x4000 /* protocol types. It assumes that higher protocols include lower protocols as subsets */ enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1}; /* security levels */ enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN}; /* printing types */ enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX, PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ}; /* Remote architectures we know about. */ enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT, RA_SAMBA}; /* case handling */ enum case_handling {CASE_LOWER,CASE_UPPER}; /* Macros to get at offsets within smb_lkrng and smb_unlkrng structures. We cannot define these as actual structures due to possible differences in structure packing on different machines/compilers. */ #define SMB_LPID_OFFSET(indx) (10 * (indx)) #define SMB_LKOFF_OFFSET(indx) ( 2 + (10 * (indx))) #define SMB_LKLEN_OFFSET(indx) ( 6 + (10 * (indx))) /* Macro to cache an error in a write_bmpx_struct */ #define CACHE_ERROR(w,c,e) ((w)->wr_errclass = (c), (w)->wr_error = (e), \ w->wr_discard = True, -1) /* Macro to test if an error has been cached for this fnum */ #define HAS_CACHED_ERROR(fnum) (Files[(fnum)].open && \ Files[(fnum)].wbmpx_ptr && \ Files[(fnum)].wbmpx_ptr->wr_discard) /* Macro to turn the cached error into an error packet */ #define CACHED_ERROR(fnum) cached_error_packet(inbuf,outbuf,fnum,__LINE__) /* these are the datagram types */ #define DGRAM_DIRECT_UNIQUE 0x10 #define ERROR(class,x) error_packet(inbuf,outbuf,class,x,__LINE__) /* this is how errors are generated */ #define UNIXERROR(defclass,deferror) unix_error_packet(inbuf,outbuf,defclass,deferror,__LINE__) #define ROUNDUP(x,g) (((x)+((g)-1))&~((g)-1)) /* * Global value meaing that the smb_uid field should be * ingored (in share level security and protocol level == CORE) */ #define UID_FIELD_INVALID 0 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */ /* Defines needed for multi-codepage support. */ #define MSDOS_LATIN_1_CODEPAGE 850 #define KANJI_CODEPAGE 932 #define HANGUL_CODEPAGE 949 #define BIG5_CODEPAGE 950 #define SIMPLIFIED_CHINESE_CODEPAGE 936 #ifdef KANJI /* * Default client code page - Japanese */ #define DEFAULT_CLIENT_CODE_PAGE KANJI_CODEPAGE #else /* KANJI */ /* * Default client code page - 850 - Western European */ #define DEFAULT_CLIENT_CODE_PAGE MSDOS_LATIN_1_CODEPAGE #endif /* KANJI */ /* * Size of buffer to use when moving files across filesystems. */ #define COPYBUF_SIZE (8*1024) /* * Integers used to override error codes. */ extern int unix_ERR_class; extern int unix_ERR_code; /* * Map the Core and Extended Oplock requesst bits down * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK). */ /* * Core protocol. */ #define CORE_OPLOCK_REQUEST(inbuf) ((CVAL(inbuf,smb_flg)&((1<<5)|(1<<6)))>>5) /* * Extended protocol. */ #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1) /* Lock types. */ #define LOCKING_ANDX_SHARED_LOCK 0x1 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4 #define LOCKING_ANDX_CANCEL_LOCK 0x8 #define LOCKING_ANDX_LARGE_FILES 0x10 /* Oplock levels */ #define OPLOCKLEVEL_NONE 0 #define OPLOCKLEVEL_II 1 /* * Bits we test with. */ #define EXCLUSIVE_OPLOCK 1 #define BATCH_OPLOCK 2 #define CORE_OPLOCK_GRANTED (1<<5) #define EXTENDED_OPLOCK_GRANTED (1<<15) /* * Loopback command offsets. */ #define UDP_CMD_LEN_OFFSET 0 #define UDP_CMD_PORT_OFFSET 4 #define UDP_CMD_HEADER_LEN 6 #define UDP_MESSAGE_CMD_OFFSET 0 /* * Oplock break command code to send over the udp socket. * * Form of this is : * * 0 2 6 10 14 18 22 * +----+--------+--------+--------+-------+--------+ * | cmd| pid | dev | inode | sec | usec | * +----+--------+--------+--------+-------+--------+ */ #define OPLOCK_BREAK_CMD 0x1 #define OPLOCK_BREAK_PID_OFFSET 2 #define OPLOCK_BREAK_DEV_OFFSET 6 #define OPLOCK_BREAK_INODE_OFFSET 10 #define OPLOCK_BREAK_SEC_OFFSET 14 #define OPLOCK_BREAK_USEC_OFFSET 18 #define OPLOCK_BREAK_MSG_LEN 22 #define CMD_REPLY 0x8000 #endif /* _SMB_H */ #include "ntdomain.h" /* _SMB_H */