/* 
   Unix SMB/Netbios implementation.
   Version 3.0
   client file read/write routines
   Copyright (C) Andrew Tridgell 1994-1998
   
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#define NO_SYSLOG

#include "includes.h"

/****************************************************************************
issue a single SMBread and don't wait for a reply
****************************************************************************/

static BOOL cli_issue_read(struct cli_state *cli, int fnum, off_t offset, 
			   size_t size, int i)
{
	memset(cli->outbuf,'\0',smb_size);
	memset(cli->inbuf,'\0',smb_size);

	set_message(cli->outbuf,10,0,True);
		
	CVAL(cli->outbuf,smb_com) = SMBreadX;
	SSVAL(cli->outbuf,smb_tid,cli->cnum);
	cli_setup_packet(cli);

	CVAL(cli->outbuf,smb_vwv0) = 0xFF;
	SSVAL(cli->outbuf,smb_vwv2,fnum);
	SIVAL(cli->outbuf,smb_vwv3,offset);
	SSVAL(cli->outbuf,smb_vwv5,size);
	SSVAL(cli->outbuf,smb_vwv6,size);
	SSVAL(cli->outbuf,smb_mid,cli->mid + i);

	return cli_send_smb(cli);
}

/****************************************************************************
  Read size bytes at offset offset using SMBreadX.
****************************************************************************/

ssize_t cli_read(struct cli_state *cli, int fnum, char *buf, off_t offset, size_t size)
{
	uint32 ecode;
	uint8 eclass;
	char *p;
	int size2;
	int readsize;
	ssize_t total = 0;

	if (size == 0) 
		return 0;

	/*
	 * Set readsize to the maximum size we can handle in one readX,
	 * rounded down to a multiple of 1024.
	 */

	readsize = (cli->max_xmit - (smb_size+32)) & ~1023;
	if (readsize > size )
		readsize = size;

	while (total < size) {

		/* Issue a read and receive a reply */

		if (!cli_issue_read(cli, fnum, offset, readsize, 0))
			return -1;

		if (!cli_receive_smb(cli))
			return -1;

		/*
		 * Check for error.  Because the client library doesn't support
		 * STATUS32, we need to check for and ignore the more data error
		 * for pipe support.
		 */

		if (cli_error(cli, &eclass, &ecode, NULL) &&
			(eclass != ERRDOS && ecode != ERRmoredata)) {
			return -1;
		}

		size2 = SVAL(cli->inbuf, smb_vwv5);

		if (size2 > readsize) {
			DEBUG(5,("server returned more than we wanted!\n"));
			return -1;
		} else if (size2 < 0) {
			DEBUG(5,("read return < 0!\n"));
			return -1;
		}

		/* Copy data into buffer */

		p = smb_base(cli->inbuf) + SVAL(cli->inbuf,smb_vwv6);
		memcpy(buf + total, p, size2);

		total += size2;
		offset += size2;

		/*
		 * If the server returned less than we asked for we're at EOF.
		 */

		if (size2 < readsize)
			break;
	}

	return total;
}

/****************************************************************************
issue a single SMBwrite and don't wait for a reply
****************************************************************************/

static BOOL cli_issue_write(struct cli_state *cli, int fnum, off_t offset, uint16 mode, char *buf,
			    size_t size, int i)
{
	char *p;

	memset(cli->outbuf,'\0',smb_size);
	memset(cli->inbuf,'\0',smb_size);

	if (size > 0xFFFF)
		set_message(cli->outbuf,14,0,True);
	else
		set_message(cli->outbuf,12,0,True);
	
	CVAL(cli->outbuf,smb_com) = SMBwriteX;
	SSVAL(cli->outbuf,smb_tid,cli->cnum);
	cli_setup_packet(cli);
	
	CVAL(cli->outbuf,smb_vwv0) = 0xFF;
	SSVAL(cli->outbuf,smb_vwv2,fnum);

	SIVAL(cli->outbuf,smb_vwv3,offset);
	SIVAL(cli->outbuf,smb_vwv5,(mode & 0x0008) ? 0xFFFFFFFF : 0);
	SSVAL(cli->outbuf,smb_vwv7,mode);

	SSVAL(cli->outbuf,smb_vwv8,(mode & 0x0008) ? size : 0);
	SSVAL(cli->outbuf,smb_vwv9,((size>>16)&1));
	SSVAL(cli->outbuf,smb_vwv10,size);
	SSVAL(cli->outbuf,smb_vwv11,
	      smb_buf(cli->outbuf) - smb_base(cli->outbuf));
	
	p = smb_base(cli->outbuf) + SVAL(cli->outbuf,smb_vwv11);
	memcpy(p, buf, size);
	cli_setup_bcc(cli, p+size);

	SSVAL(cli->outbuf,smb_mid,cli->mid + i);
	
	show_msg(cli->outbuf);
	return cli_send_smb(cli);
}

/****************************************************************************
  write to a file
  write_mode: 0x0001 disallow write cacheing
              0x0002 return bytes remaining
              0x0004 use raw named pipe protocol
              0x0008 start of message mode named pipe protocol
****************************************************************************/

ssize_t cli_write(struct cli_state *cli,
		  int fnum, uint16 write_mode,
		  char *buf, off_t offset, size_t size)
{
	int bwritten = 0;
	int issued = 0;
	int received = 0;
	int mpx = MAX(cli->max_mux-1, 1);
	int block = (cli->max_xmit - (smb_size+32)) & ~1023;
	int blocks = (size + (block-1)) / block;

	while (received < blocks) {

		while ((issued - received < mpx) && (issued < blocks)) {
			int bsent = issued * block;
			int size1 = MIN(block, size - bsent);

			if (!cli_issue_write(cli, fnum, offset + bsent,
			                write_mode,
			                buf + bsent,
					size1, issued))
				return -1;
			issued++;
		}

		if (!cli_receive_smb(cli))
			return bwritten;

		received++;

		if (CVAL(cli->inbuf,smb_rcls) != 0)
			break;

		bwritten += SVAL(cli->inbuf, smb_vwv2);
	}

	while (received < issued && cli_receive_smb(cli))
		received++;
	
	return bwritten;
}

/****************************************************************************
  write to a file using a SMBwrite and not bypassing 0 byte writes
****************************************************************************/

ssize_t cli_smbwrite(struct cli_state *cli,
		     int fnum, char *buf, off_t offset, size_t size1)
{
	char *p;
	ssize_t total = 0;

	do {
		size_t size = MIN(size1, cli->max_xmit - 48);
		
		memset(cli->outbuf,'\0',smb_size);
		memset(cli->inbuf,'\0',smb_size);

		set_message(cli->outbuf,5, 0,True);

		CVAL(cli->outbuf,smb_com) = SMBwrite;
		SSVAL(cli->outbuf,smb_tid,cli->cnum);
		cli_setup_packet(cli);
		
		SSVAL(cli->outbuf,smb_vwv0,fnum);
		SSVAL(cli->outbuf,smb_vwv1,size);
		SIVAL(cli->outbuf,smb_vwv2,offset);
		SSVAL(cli->outbuf,smb_vwv4,0);
		
		p = smb_buf(cli->outbuf);
		*p++ = 1;
		SSVAL(p, 0, size); p += 2;
		memcpy(p, buf, size); p += size;

		cli_setup_bcc(cli, p);
		
		if (!cli_send_smb(cli))
			return -1;

		if (!cli_receive_smb(cli))
			return -1;
		
		if (CVAL(cli->inbuf,smb_rcls) != 0)
			return -1;

		size = SVAL(cli->inbuf,smb_vwv0);
		if (size == 0)
			break;

		size1 -= size;
		total += size;
	} while (size1);

	return total;
}