#!/bin/sh
# Bootstrap Samba and run a number of tests against it.

if [ $# -lt 1 ]
then
	echo "$0 PREFIX TESTS"
	exit
fi

ARG0=$0
ARG1=$1
ARG2=$2
ARG3=$3

if [ -z "$TORTURE_MAXTIME" ]; then
    TORTURE_MAXTIME=1200
fi

# disable rpc validation when using valgrind - its way too slow
if [ -z "$VALGRIND" ]; then
    VALIDATE="validate";
else
    VALIDATE="";
fi

OLD_PWD=`pwd`
PREFIX=$ARG1
PREFIX=`echo $PREFIX | sed s+//+/+`
export PREFIX

# allow selection of the test lists
TESTS=$ARG2

if [ $TESTS = "all" ]; then
    TLS_ENABLED="yes"
else
    TLS_ENABLED="no"
fi
export TLS_ENABLED

LD_LDB_MODULE_PATH=$OLD_PWD/bin/modules/ldb
export LD_LDB_MODULE_PATH

LD_SAMBA_MODULE_PATH=$OLD_PWD/bin/modules
export LD_SAMBA_MODULE_PATH

LD_LIBRARY_PATH=$OLD_PWD/bin/shared:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH

PKG_CONFIG_PATH=$OLD_PWD/bin/pkgconfig:$PKG_CONFIG_PATH
export PKG_CONFIG_PATH

incdir=`dirname $ARG0`
echo -n "PROVISIONING..."
. $incdir/mktestsetup.sh $PREFIX >/dev/null || exit 1
echo "DONE"

PATH=bin:$PATH
export PATH

DO_SOCKET_WRAPPER=$ARG3
if [ x"$DO_SOCKET_WRAPPER" = x"SOCKET_WRAPPER" ];then
	SOCKET_WRAPPER_DIR="$PREFIX/w"
	export SOCKET_WRAPPER_DIR
	echo "SOCKET_WRAPPER_DIR=$SOCKET_WRAPPER_DIR"
else
	echo "NOT USING SOCKET_WRAPPER"
fi

incdir=`dirname $ARG0`
. $incdir/test_functions.sh

#Start slapd before smbd
if [ x"$TEST_LDAP" = x"yes" ]; then
    slapd_start || exit 1;
    echo -n "LDAP PROVISIONING..."
    $srcdir/bin/smbscript $srcdir/setup/provision $PROVISION_OPTIONS --ldap-backend=$LDAPI || {
	echo "LDAP PROVISIONING failed: $srcdir/bin/smbscript $srcdir/setup/provision $PROVISION_OPTIONS --ldap-backend=$LDAPI"
	exit 1;
    }
    #LDAP is slow
    TORTURE_MAXTIME=`expr $TORTURE_MAXTIME '*' 2`
fi

SMBD_TEST_FIFO="$PREFIX/smbd_test.fifo"
export SMBD_TEST_FIFO
SMBD_TEST_LOG="$PREFIX/smbd_test.log"
export SMBD_TEST_LOG

SOCKET_WRAPPER_DEFAULT_IFACE=1
export SOCKET_WRAPPER_DEFAULT_IFACE
smbd_check_or_start

SOCKET_WRAPPER_DEFAULT_IFACE=6
export SOCKET_WRAPPER_DEFAULT_IFACE
TORTURE_INTERFACES='127.0.0.6/8,127.0.0.7/8,127.0.0.8/8,127.0.0.9/8,127.0.0.10/8,127.0.0.11/8'
TORTURE_OPTIONS="--option=interfaces=$TORTURE_INTERFACES $CONFIGURATION"
# ensure any one smbtorture call doesn't run too long
TORTURE_OPTIONS="$TORTURE_OPTIONS --maximum-runtime=$TORTURE_MAXTIME"
TORTURE_OPTIONS="$TORTURE_OPTIONS --target=samba4"
export TORTURE_OPTIONS

if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then
	TORTURE_OPTIONS="$TORTURE_OPTIONS --option=torture:progress=no"
fi

 runtest() {
	if [ -z "$PREFIX" ]; then
	    PREFIX=test_prefix
	    mkdir -p $PREFIX
	fi
	name=$1
	shift 1
	cmdline="$*"

	SMBD_IS_UP="no"

	shname=`echo $name | \
	sed -e 's%[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789\-]%_%g'`

	UNIQUE_PID=`/bin/sh -c 'echo $$'`
	TEST_LOG="$PREFIX/test_log.${UNIQUE_PID}"
	TEST_PCAP="$PREFIX/test_${shname}_${UNIQUE_PID}.pcap"
	trap "rm -f $TEST_LOG $TEST_PCAP" EXIT

        if [ -n "$SMBD_TEST_LOG" -a -z "$smbd_log_size" ]; then
	    smbd_log_size=`wc -l < $SMBD_TEST_LOG`;
	fi

	if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then
		echo "--==--==--==--==--==--==--==--==--==--==--"
		echo "Running test $name (level 0 stdout)"
		echo "--==--==--==--==--==--==--==--==--==--==--"
		date
		echo "Testing $name"
	else
	        nf="`expr $failed + $totalfailed`";
		if [ "$nf" = "0" ]; then 
		    echo "Testing $name"
		else 
		    echo "Testing $name ($nf tests failed so far)"
		fi
	fi

	smbd_check_only && SMBD_IS_UP="yes"
	if [ x"$SMBD_IS_UP" != x"yes" ];then
		if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then
			echo "SMBD is down! Skipping: $cmdline"
			echo "=========================================="
			echo "TEST SKIPPED: $name (reason SMBD is down)"
			echo "=========================================="
   		else
			echo "TEST SKIPPED: $name (reason SMBD is down)"
		fi
		return 1
	fi

	if [ x"$MAKE_TEST_ENABLE_PCAP" = x"yes" ];then
		SOCKET_WRAPPER_PCAP_FILE=$TEST_PCAP
		export SOCKET_WRAPPER_PCAP_FILE
	fi

	( $cmdline > $TEST_LOG 2>&1 )
	status=$?
	# show any additional output from smbd that has happened in this test
	smbd_have_test_log && {		    
	    new_log_size=`wc -l < $SMBD_TEST_LOG`;
	    test "$new_log_size" = "$smbd_log_size" || {
		echo "SMBD OUTPUT:";
		incr_log_size=`expr $new_log_size - $smbd_log_size`;
		tail -$incr_log_size $SMBD_TEST_LOG;
		smbd_log_size=$new_log_size;
	    }
	}
	if [ x"$status" != x"0" ]; then
		echo "TEST OUTPUT:"
		cat $TEST_LOG;
		rm -f $TEST_LOG;
		if [ x"$MAKE_TEST_ENABLE_PCAP" = x"yes" ];then
			echo "TEST PCAP: $TEST_PCAP"
		fi
		if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then
			echo "=========================================="
			echo "TEST FAILED: $name (status $status)"
			echo "=========================================="
   		else
			echo "TEST FAILED: $cmdline (status $status)"
		fi
		trap "" EXIT
		return 1;
	fi
	rm -f $TEST_LOG;
	if [ x"$MAKE_TEST_KEEP_PCAP" = x"yes" ];then
		echo "TEST PCAP: $TEST_PCAP"
	else
		rm -f $TEST_PCAP;
	fi
	if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then
		echo "ALL OK: $cmdline"
		echo "=========================================="
		echo "TEST PASSED: $name"
		echo "=========================================="
	fi
	trap "" EXIT
	return 0;
}

START=`date`
(
 # give time for nbt server to register its names
 echo delaying for nbt name registration
 sleep 4
 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init 
 bin/nmblookup $CONFIGURATION $SERVER
 bin/nmblookup $CONFIGURATION -U $SERVER $SERVER
 bin/nmblookup $CONFIGURATION $SERVER
 bin/nmblookup $CONFIGURATION -U $SERVER $NETBIOSNAME
 bin/nmblookup $CONFIGURATION $NETBIOSNAME
 bin/nmblookup $CONFIGURATION -U $SERVER $NETBIOSNAME

# start off with 0 failures
failed=0
export failed
totalfailed=0
export totalfailed

. script/tests/tests_$TESTS.sh | (
 	while read LINE
	do
		if [ "$LINE" = "-- TEST --" ]; then
			read NAME
			read CMDLINE
			runtest "$NAME" "$CMDLINE" || totalfailed=`expr $totalfailed + $?`
		else
			echo "$LINE"
		fi
 done
	 )

 exit $totalfailed
) 9>$SMBD_TEST_FIFO
failed=$?

kill `cat $PIDDIR/smbd.pid`

if [ "$TEST_LDAP"x = "yesx" ]; then
    kill `cat $PIDDIR/slapd.pid`
fi

END=`date`
echo "START: $START ($ARG0)";
echo "END:   $END ($ARG0)";

# if there were any valgrind failures, show them
count=`find $PREFIX -name 'valgrind.log*' | wc -l`
if [ "$count" != 0 ]; then
    for f in $PREFIX/valgrind.log*; do
	if [ -s $f ] && grep -v DWARF2.CFI.reader $f > /dev/null; then
	    echo "VALGRIND FAILURE";
	    failed=`expr $failed + 1`
	    cat $f
	fi
    done
fi

teststatus $ARG0 $failed