path: root/docs/docbook/projdoc/Samba-PDC-HOWTO.xml

<chapter id="samba-pdc">

<chapterinfo>
	&author.jht;
	&author.jerry;
	<author>
		<firstname>David</firstname><surname>Bannon</surname>
		<affiliation>
			<orgname>Samba Team</orgname>
			<address><email>dbannon@samba.org</email></address>
		</affiliation>
	</author>
</chapterinfo>

<title>Domain Control</title>

<formalpara><title><emphasis>The Essence of Learning:</emphasis></title>
<para>
There are many who approach MS Windows networking with incredible misconceptions.
That's OK, because it give the rest of us plenty of opportunity to help someone.
Those who really want help would be well advised to be informed of information that
is in fact already available.
</para>
</formalpara>

<para>
The reader is well advised NOT to tackle this section without having first understood
and mastered some basics. MS Windows networking is not particularly forgiving of
misconfiguration. Users of MS Windows networking are likely to complain bitterly
of persistent niggles that may be caused by broken network or system configuration.
To a great many people however, MS Windows networking starts with a domain controller
that in some magical way is expected to solve all ills.
</para>

<para>
From the Samba mailing list one can readilly identify many common networking issues.
If you are not clear on the following subjects, then it will do much good to read the 
sections of this HOWTO that deal with it. These are the most common causes of MS Windows
networking problems:
</para>

<itemizedlist>
	<listitem><para>Basic TCP/IP configuration</para></listitem>
	<listitem><para>NetBIOS name resolution</para></listitem>
	<listitem><para>Authentication configuration</para></listitem>
	<listitem><para>User and Group configuration</para></listitem>
	<listitem><para>Basic File and Directory Permission Control in Unix/Linux</para></listitem>
	<listitem><para>Understanding of how MS Windows clients interoperate in a network
	environment</para></listitem>
</itemizedlist>

<para>
Do not be put off too much, on the surface of it MS Windows networking seems so simple
that any fool can do it. In fact, only a fool would set up an MS Windows network with
inadequate training and preparation. So let's get our first indelible principle out of the
way: <emphasis>It is perfectly OK to make mistakes!</emphasis> In the right place and at
the right time, mistakes are the essence of learning. It is <emphasis>very much</emphasis>
not Ok to make mistakes that cause loss of productivity and impose an avoidable financial
burden on an organisation.
</para>

<para>
Where is the right place to make mistakes? Only out of harms' way! If you are going to
make mistakes, then please do this on a test network, away from users and in such a way as
to not inflict pain on others. Do your learning on a test network.
</para>

<sect1>
<title>Features and Benefits</title>

<para>
The following functionalities are new to the Samba-3 release:
</para>

<itemizedlist>
	<listitem><para>
	Windows NT4 domain trusts
	</para></listitem>
	
	<listitem><para>
	Adding users via the User Manager for Domains or via the Windows 200x Microsoft
	Management Console.
	</para></listitem>

	<listitem><para>
	Samba-3 introduces replaceable and multiple user account (authentication)
	back ends. In the case where the back end is placed in an LDAP database
	Samba-3 confers the benefits of a back end that can be distributed, replicated,
	and highly scalable.
	</para></listitem>

	<listitem><para>
	Samba-3 implements full Unicode support. This simplifies cross locale internationalisation
	support. It also opens up the use of protocols that samba-2.2.x had but could not use due
	to the need to fully support Unicode.
	</para></listitem>
</itemizedlist>

<para>
The following functionalities are NOT provided by Samba-3:
</para>

<itemizedlist>
	<listitem><para>
	SAM replication with Windows NT4 Domain Controllers
	(i.e. a Samba PDC and a Windows NT BDC or vice versa) 
	</para></listitem>
	
	<listitem><para>
	Acting as a Windows 2000 Domain Controller (i.e. Kerberos and 
	Active Directory) - In point of fact, Samba-3 DOES have some
	Active Directory Domain Control ability that is at this time
	purely experimental <emphasis>AND</emphasis> that is certain
	to change as it becomes a fully supported feature some time
	during the samba-3 (or later) life cycle.
	</para></listitem>
</itemizedlist>

<para>
Please note that Windows 9x / Me / XP Home clients are not true members of a domain
for reasons outlined in this article.  Therefore the protocol for support of Windows
9x / Me style domain logons is completely different from NT4 / Win2k type domain logons 
nd has been officially supported for some time.
</para>

<para><emphasis>
MS Windows XP Home edition is NOT able to join a domain and does not permit
the use of domain logons.
</emphasis></para>

<para>
Samba-3 offers a complete implementation of group mapping between Windows NT groups
and Unix groups (this is really quite complicated to explain in a short space).
</para>

<para>
A Samba-3 PDC also has to store machine trust account information
in a suitable backend data store. With Samba-3 there can be multiple back-ends
for this including:
</para>

<itemizedlist>
	<listitem><para>
	<emphasis>smbpasswd</emphasis> - the plain ascii file stored used by
	earlier versions of Samba. This file configuration option requires
	a Unix/Linux system account for EVERY entry (ie: both for user and for
	machine accounts). This file will be located in the <emphasis>private</emphasis>
	directory (default is /usr/local/samba/lib/private or on linux /etc/samba).
	</para></listitem>

	<listitem><para>
	<emphasis>tdbsam</emphasis> - a binary database backend that will be
	stored in the <emphasis>private</emphasis> directory in a file called
	<emphasis>passwd.tdb</emphasis>. The key benefit of this binary format
	file is that it can store binary objects that can not be accomodated
	in the traditional plain text smbpasswd file.
	</para></listitem>

	<listitem><para>
	<emphasis>ldapsam</emphasis> - An LDAP based back-end. Permits the
	LDAP server to be specified. eg: ldap://localhost or ldap://frodo.murphy.com
	</para></listitem>
</itemizedlist>

<para>
Read the chapter about the <link linkend="passdb">User Database</link> for details.
</para>

<note><para>
The new tdbsam and ldapsam account backends store vastly more information than
smbpasswd is capable of. The new backend database includes capacity to specify
per user settings for many parameters, over-riding global settings given in the
<filename>smb.conf</filename> file. eg: logon drive, logon home, logon path, etc.
</para></note>

</sect1>

<sect1>
<title>Basics of Domain Control</title>

<para>
Over the years public perceptions of what Domain Control really is has taken on an
almost mystical nature. Before we branch into a brief overview of Domain Control
there are three basic types of domain controllers:
</para>

<sect2>
<title>Domain Controller Types</title>

<itemizedlist>
	<listitem><para>Primary Domain Controller</para></listitem>
	<listitem><para>Backup Domain Controller</para></listitem>
	<listitem><para>ADS Domain Controller</para></listitem>
</itemizedlist>

<para>
The <emphasis>Primary Domain Controller</emphasis> or PDC plays an important role in the MS 
Windows NT4 and Windows 200x Domain Control architecture, but not in the manner that so many
expect. There is a form of folk lore that dictates that because of it's role in the MS Windows
network that the PDC should be the most powerful and most capable machine in the network.
As corny as it may seem to say this here, where good over all network performance is desired
the entire infrastructure needs to be balanced. It may be more advisable to invest more in
the Backup Domain Controllers and Stand-Alone (or Domain Member) servers than in the PDC.
</para>

<para>
In the case of MS Windows NT4 style domaines it is the PDC seeds the Domain Control database,
a part of the Windows registry called the SAM (Security Accounts Management). It plays a key
part in NT4 type domain user authentication and in synchronisation of the domain authentication
database with Backup Domain Controllers. 
</para>

<para>
New to Samba-3 is the ability to use a back-end database that holds the same type of data as
the NT4 style SAM (Security Account Manager) database (one of the registry files).
The samba-3 SAM can be specified via the smb.conf file parameter
<emphasis>passwd backend</emphasis> and valid options include
<emphasis>smbpasswd, tdbsam, ldapsam, nisplussam, xmlsam, mysqlsam, plugin, guest</emphasis>.
</para>

<para>
The <emphasis>Backup Domain Controller</emphasis> or BDC plays a key role in servicing network
authentication requests. The BDC is biased to answer logon requests in preference to the PDC.
On a network segment that has a BDC and a PDC the BDC will be most likely to service network
logon requests. The PDC will answer network logon requests when the BDC is too busy (high load).
A BDC can be promoted to a PDC. If the PDC is on line at the time that the BDC is promoted to
PDC the previous PDC is automatically demoted to a BDC. With Samba-3 this is NOT an automatic
operation, the PDB and BDC must be manually configured and changes need to be made likewise.
</para>

<para>
With MS Windows NT4 it is an install time decision what type of machine the server will be.
It is possible to change the promote a BDC to a PDC and vica versa only, but the only way
to convert a domain controller to a domain member server or a stand-alone server is to
reinstall it. The install time choices offered are:
</para>

<itemizedlist>
	<listitem><para>Primary Domain Controller - The one that seeds the domain SAM</para></listitem>
	<listitem><para>Backup Domain Controller - One that obtains a copy of the domain SAM</para></listitem>
	<listitem><para>Stand-Alone Server - One that plays NO part is SAM synchronisation</para></listitem>
</itemizedlist>

<para>
With MS Windows 2000 the configuration of domain control is done after the server has been
installed. Samba-3 is capable of acting fully as a native member of a Windows 200x server
Active Directory domain.
</para>

<para>
New to Samba-3 is the ability to function fully as an MS Windows NT4 style Domain Controller,
excluding the SAM replication components. However, please be aware that Samba-3 support the
MS Windows 200x domain control protcols also.
</para>

<para>
At this time Samba-3 is capable of acting as an <emphasis>ADS Domain Controller</emphasis> but
in only a limited and experimental manner. This functionality should not be depended upon
until the samba-team offers formal support for it. At such a time, the documentation will
be revised to duely reflect all configuration and management requirements.
</para>

</sect2>

<sect2>
<title>Preparing for Domain Control</title>

<para>
The following outlines the steps necessary for configuring Samba-3 as an MS Windows NT4 style PDC.
It is necessary to have a working Samba server prior to implementing the PDC functionality.
</para>

<itemizedlist>
	<listitem><para>
	Domain logons for Windows NT 4.0 / 200x / XP Professional clients.
	</para></listitem>
	
	<listitem><para>
	Placing Windows 9x / Me clients in user level security
	</para></listitem>
	
	<listitem><para>
	Retrieving a list of users and groups from a Samba PDC to Windows 9x / Me / NT / 200x / XP
	Professional clients
	</para></listitem>
	
	<listitem><para>
	Roaming Profiles
	</para></listitem>
	
	<listitem><para>
	Network/System Policies
	</para></listitem>
</itemizedlist>

<note><para>
Roaming Profiles and System/Network policies are advanced network administration topics
that are covered separately in this document.
</para></note>

<para>
Implementing a Samba PDC can basically be divided into 4 broad steps.
</para>

<orderedlist numeration="arabic">
	<listitem><para>
	Configuration of basic MS Windows Networking
	</para></listitem>

	<listitem><para>
	Configuring the Samba PDC
	</para></listitem>
	
	<listitem><para>
	Creating machine trust accounts	and joining machines to the domain
	</para></listitem>

	<listitem><para>
	Adding and managing domain user accounts
	</para></listitem>
</orderedlist>

<para>
There are other details such as user profiles, system policies, etc. However, these are not
necessarily specific to a Samba PDC as much as they are related to Windows NT networking concepts.
</para>

</sect2>
</sect1>

<sect1>
<title>Domain Control - Example Configuration</title>

<para>
The first step in creating a working Samba PDC is to understand the parameters necessary
in &smb.conf;. Here we attempt to explain the parameters that are covered in
the &smb.conf; man page.
</para>

<para>
Here is an example &smb.conf; for acting as a PDC:
</para>

<para><programlisting>
	[global]
	    ; Basic server settings
	    <ulink url="smb.conf.5.html#NETBIOSNAME">netbios name</ulink> = <replaceable>POGO</replaceable>
	    <ulink url="smb.conf.5.html#WORKGROUP">workgroup</ulink> = <replaceable>NARNIA</replaceable>

	    ; User and Machine Account Backends
	    ; Choices are: tdbsam, smbpasswd, ldapsam, mysqlsam, xmlsam, guest
	    <ulink url="smb.conf.5.html#PASSDBBACKEND">passdb backend</ulink> = ldapsam, guest

	    ; we should act as the domain and local master browser
	    <ulink url="smb.conf.5.html#OSLEVEL">os level</ulink> = 64
	    <ulink url="smb.conf.5.html#PERFERREDMASTER">preferred master</ulink> = yes
	    <ulink url="smb.conf.5.html#DOMAINMASTER">domain master</ulink> = yes
	    <ulink url="smb.conf.5.html#LOCALMASTER">local master</ulink> = yes
	    
	    ; security settings (must user security = user)
	    <ulink url="smb.conf.5.html#SECURITYEQUALSUSER">security</ulink> = user
	    
	    ; encrypted passwords are a requirement for a PDC
	    <ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">encrypt passwords</ulink> = yes
	    
	    ; support domain logons
	    <ulink url="smb.conf.5.html#DOMAINLOGONS">domain logons</ulink> = yes
	    
	    ; where to store user profiles?
	    <ulink url="smb.conf.5.html#LOGONPATH">logon path</ulink> = \\%N\profiles\%u
	    
	    ; where is a user's home directory and where should it be mounted at?
	    <ulink url="smb.conf.5.html#LOGONDRIVE">logon drive</ulink> = H:
	    <ulink url="smb.conf.5.html#LOGONHOME">logon home</ulink> = \\homeserver\%u
	    
	    ; specify a generic logon script for all users
	    ; this is a relative **DOS** path to the [netlogon] share
	    <ulink url="smb.conf.5.html#LOGONSCRIPT">logon script</ulink> = logon.cmd

	; necessary share for domain controller
	[netlogon]
	    <ulink url="smb.conf.5.html#PATH">path</ulink> = /usr/local/samba/lib/netlogon
	    <ulink url="smb.conf.5.html#READONLY">read only</ulink> = yes
	    <ulink url="smb.conf.5.html#WRITELIST">write list</ulink> = <replaceable>ntadmin</replaceable>
	    
	; share for storing user profiles
	[profiles]
	    <ulink url="smb.conf.5.html#PATH">path</ulink> = /export/smb/ntprofile
	    <ulink url="smb.conf.5.html#READONLY">read only</ulink> = no
	    <ulink url="smb.conf.5.html#CREATEMASK">create mask</ulink> = 0600
	    <ulink url="smb.conf.5.html#DIRECTORYMASK">directory mask</ulink> = 0700
</programlisting></para>

<note><para>
The above parameters make for a full set of parameters that may define the server's mode
of operation. The following parameters are the essentials alone:

<programlisting>
	workgroup = NARNIA
	domain logons = Yes
	security = User
</programlisting>

The additional parameters shown in the longer listing above just makes for a
more complete environment.
</para></note>

<para>
There are a couple of points to emphasize in the above configuration.
</para>

<itemizedlist>
	<listitem><para>
	Encrypted passwords must be enabled.  For more details on how 
	to do this, refer to <link linkend="passdb">the User Database chapter</link>.
	</para></listitem>
	
	<listitem><para>
	The server must support domain logons and have a
	<filename>[netlogon]</filename> share
	</para></listitem>
	
	<listitem><para>
	The server must be the domain master browser in order for Windows 
	client to locate the server as a DC.  Please refer to the various 
	Network Browsing documentation included with this distribution for 
	details.
	</para></listitem>
</itemizedlist>    

<sect2>
<title>Machine Trust Accounts and Domain Membership</title>

<para>
A machine trust account is an account that is used to authenticate a client machine
(rather than a user) to the Domain Controller server.  In Windows terminology,
this is known as a "Computer Account."</para>

<para>
The password of a machine trust account acts as the shared secret for
secure communication with the Domain Controller.  This is a security
feature to prevent an unauthorized machine with the same NetBIOS name
from joining the domain and gaining access to domain user/group
accounts.  Windows NT, 200x, XP Professional clients use machine trust
accounts, but Windows 9x / Me / XP Home clients do not.  Hence, a
Windows 9x / Me / XP Home  client is never a true member of a domain
because it does not possess a machine trust account, and thus has no
shared secret with the domain controller.
</para>

<para>A Windows NT4 PDC stores each machine trust account in the Windows
Registry. The introduction of MS Windows 2000 saw the introduction of Active Directory,
the new repository for machine trust accounts.
</para>

<para>
A Samba PDC, however, stores each machine trust account in two parts,
as follows:

<itemizedlist>
    <listitem><para>A Samba account, stored in the same location as user
    LanMan and NT password hashes (currently <filename>smbpasswd</filename>).
    The Samba account possesses and uses only the NT password hash.</para></listitem>

    <listitem><para>A corresponding Unix account, typically stored in
    <filename>/etc/passwd</filename>. (Future releases will alleviate the need to
    create <filename>/etc/passwd</filename> entries.) </para></listitem>
</itemizedlist>
</para>

<para>
There are two ways to create machine trust accounts:
</para>

<itemizedlist>
	<listitem><para> Manual creation. Both the Samba and corresponding
	Unix account are created by hand.</para></listitem>
	
	<listitem><para> "On-the-fly" creation. The Samba machine trust
	account is automatically created by Samba at the time the client
	is joined to the domain. (For security, this is the
	recommended method.) The corresponding Unix account may be
	created automatically or manually. </para>
	</listitem>

</itemizedlist>

<sect3>
<title>Manual Creation of Machine Trust Accounts</title>

<para>
The first step in manually creating a machine trust account is to
manually create the corresponding Unix account in
<filename>/etc/passwd</filename>.  This can be done using
<command>vipw</command> or other 'add user' command that is normally
used to create new Unix accounts.  The following is an example for a
Linux based Samba server:
</para>

<para>
  <prompt>root# </prompt><command>/usr/sbin/useradd -g 100 -d /dev/null -c <replaceable>"machine 
nickname"</replaceable> -s /bin/false <replaceable>machine_name</replaceable>$ </command>
</para>
<para>
<prompt>root# </prompt><command>passwd -l <replaceable>machine_name</replaceable>$</command>
</para>

<para>On *BSD systems, this can be done using the 'chpass' utility:</para>

<para>
<prompt>root# </prompt><command>chpass -a "<replaceable>machine_name</replaceable>$:*:101:100::0:0:Workstation <replaceable>machine_name</replaceable>:/dev/null:/sbin/nologin"</command>
</para>

<para>
The <filename>/etc/passwd</filename> entry will list the machine name 
with a "$" appended, won't have a password, will have a null shell and no 
home directory. For example a machine named 'doppy' would have an 
<filename>/etc/passwd</filename> entry like this:
</para>

<para><programlisting>
doppy$:x:505:501:<replaceable>machine_nickname</replaceable>:/dev/null:/bin/false
</programlisting></para>

<para>
Above, <replaceable>machine_nickname</replaceable> can be any
descriptive name for the client, i.e., BasementComputer.
<replaceable>machine_name</replaceable> absolutely must be the NetBIOS
name of the client to be joined to the domain.  The "$" must be
appended to the NetBIOS name of the client or Samba will not recognize
this as a machine trust account.
</para>

<para>
Now that the corresponding Unix account has been created, the next step is to create 
the Samba account for the client containing the well-known initial 
machine trust account password.  This can be done using the <ulink 
url="smbpasswd.8.html"><command>smbpasswd(8)</command></ulink> command 
as shown here:
</para>

<para>
<prompt>root# </prompt><userinput>smbpasswd -a -m <replaceable>machine_name</replaceable></userinput>
</para>

<para>
where <replaceable>machine_name</replaceable> is the machine's NetBIOS
name.  The RID of the new machine account is generated from the UID of 
the corresponding Unix account.
</para>

<warning>
	<title>Join the client to the domain immediately</title>

	<para>
	Manually creating a machine trust account using this method is the 
	equivalent of creating a machine trust account on a Windows NT PDC using 
	the "Server Manager".  From the time at which the account is created
	to the time which the client joins the domain and changes the password,
	your domain is vulnerable to an intruder joining your domain using
	a machine with the same NetBIOS name.  A PDC inherently trusts
	members of the domain and will serve out a large degree of user 
	information to such clients.  You have been warned!
	</para>
</warning>
</sect3>


<sect3>
<title>"On-the-Fly" Creation of Machine Trust Accounts</title>

<para>
The second (and recommended) way of creating machine trust accounts is
simply to allow the Samba server to create them as needed when the client
is joined to the domain. </para>

<para>Since each Samba machine trust account requires a corresponding
Unix account, a method for automatically creating the
Unix account is usually supplied; this requires configuration of the
<ulink url="smb.conf.5.html#ADDMACHINESCRIPT">add machine script</ulink> 
option in <filename>smb.conf</filename>.  This
method is not required, however; corresponding Unix accounts may also
be created manually.
</para>


<para>
Below is an example for a RedHat Linux system.
</para>

<para><programlisting>
[global]
   # &lt;...remainder of parameters...&gt;
   add machine script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u 
</programlisting></para>

</sect3>


<sect3><title>Joining the Client to the Domain</title>

<para>
The procedure for joining a client to the domain varies with the version of Windows.
</para>

<itemizedlist>
<listitem><para><emphasis>Windows 2000</emphasis></para>

	<para>
	When the user elects to join the client to a domain, Windows prompts for
	an account and password that is privileged to join the domain. A Samba administrative
	account (i.e., a Samba account that has root privileges on the Samba server) must be
	entered here; the operation will fail if an ordinary user account is given. 
	The password for this account should be set to a different password than the associated
	<filename>/etc/passwd</filename> entry, for security reasons.
	</para>

	<para>
	The session key of the Samba administrative account acts as an
	encryption key for setting the password of the machine trust
	account. The machine trust account will be created on-the-fly, or
	updated if it already exists.
	</para>

</listitem>

<listitem><para><emphasis>Windows NT</emphasis></para>

    <para> If the machine trust account was created manually, on the
	Identification Changes menu enter the domain name, but do not
	check the box "Create a Computer Account in the Domain."  In this case,
	the existing machine trust account is used to join the machine to
	the domain.</para>

    <para> If the machine trust account is to be created
	on-the-fly, on the Identification Changes menu enter the domain
	name, and check the box "Create a Computer Account in the Domain."  In
	this case, joining the domain proceeds as above for Windows 2000
	(i.e., you must supply a Samba administrative account when
	prompted).</para>
</listitem>

<listitem><para><emphasis>Samba</emphasis></para>
	<para>Joining a samba client to a domain is documented in 
	the <link linkend="domain-member">Domain Member</link> chapter.
</para></listitem>
</itemizedlist>

</sect3>
</sect2>
</sect1>

<sect1>
<title>Samba ADS Domain Control</title>

<para>
Not yet Freddie!
</para>

</sect1>

<sect1>
<title>Domain Control for Windows 9x/ME</title>

<para>
A domain and a workgroup are exactly the same thing in terms of network
browsing.  The difference is that a distributable authentication
database is associated with a domain, for secure login access to a
network.  Also, different access rights can be granted to users if they
successfully authenticate against a domain logon server. Samba-3 does this
now in the same way that MS Windows NT/2K.
</para>

<para>
The SMB client logging on to a domain has an expectation that every other
server in the domain should accept the same authentication information.
Network browsing functionality of domains and workgroups is identical and
is explained in this documentation under the browsing discussions.
It should be noted, that browsing is totally orthogonal to logon support.
</para>

<para>
Issues related to the single-logon network model are discussed in this
section.  Samba supports domain logons, network logon scripts, and user
profiles for MS Windows for workgroups and MS Windows 9X/ME clients
which are the focus of this section.
</para>


<para>
When an SMB client in a domain wishes to logon it broadcast requests for a
logon server.  The first one to reply gets the job, and validates its
password using whatever mechanism the Samba administrator has installed.
It is possible (but very stupid) to create a domain where the user
database is not shared between servers, i.e. they are effectively workgroup
servers advertising themselves as participating in a domain.  This
demonstrates how authentication is quite different from but closely
involved with domains.
</para>


<para>
Using these features you can make your clients verify their logon via
the Samba server; make clients run a batch file when they logon to
the network and download their preferences, desktop and start menu.
</para>

<para>
Before launching into the configuration instructions, it is 
worthwhile to look at how a Windows 9x/ME client performs a logon:
</para>

<orderedlist>
<listitem>
	<para>
	The client broadcasts (to the IP broadcast address of the subnet it is in)
	a NetLogon request. This is sent to the NetBIOS name DOMAIN&lt;1c&gt; at the
	NetBIOS layer.  The client chooses the first response it receives, which
	contains the NetBIOS name of the logon server to use in the format of 
	\\SERVER.
	</para>
</listitem>

<listitem>
	<para>
	The client then connects to that server, logs on (does an SMBsessetupX) and
	then connects to the IPC$ share (using an SMBtconX).
	</para>
</listitem>

<listitem>
	<para>
	The client then does a NetWkstaUserLogon request, which retrieves the name
	of the user's logon script. 
	</para>
</listitem>

<listitem>
	<para>
	The client then connects to the NetLogon share and searches for this 	
	and if it is found and can be read, is retrieved and executed by the client.
	After this, the client disconnects from the NetLogon share.
	</para>
</listitem>

<listitem>
	<para>
	The client then sends a NetUserGetInfo request to the server, to retrieve
	the user's home share, which is used to search for profiles. Since the
	response to the NetUserGetInfo request does not contain much more then	
	the user's home share, profiles for Win9X clients MUST reside in the user
	home directory.
	</para>
</listitem>

<listitem>
	<para>
	The client then connects to the user's home share and searches for the 
	user's profile. As it turns out, you can specify the user's home share as
	a sharename and path. For example, \\server\fred\.profile.
	If the profiles are found, they are implemented.
	</para>
</listitem>

<listitem>
	<para>
	The client then disconnects from the user's home share, and reconnects to
	the NetLogon share and looks for CONFIG.POL, the policies file. If this is
	found, it is read and implemented.
	</para>
</listitem>
</orderedlist>


<sect2>
<title>Configuring Network Logon Capability</title>

<para>
The main difference between a PDC and a Windows 9x logon server configuration is that
</para>

<itemizedlist>

<listitem><para>
Password encryption is not required for a Windows 9x logon server.
</para></listitem>

<listitem><para>
Windows 9x/ME clients do not possess machine trust accounts.
</para></listitem>

</itemizedlist>

<para>
Therefore, a Samba PDC will also act as a Windows 9x logon server.
</para>

<warning>
<title>security mode and master browsers</title>

<para>
There are a few comments to make in order to tie up some 
loose ends.  There has been much debate over the issue of whether
or not it is ok to configure Samba as a Domain Controller in security
modes other than <constant>USER</constant>.  The only security mode 
which  will not work due to technical reasons is <constant>SHARE</constant>
mode security.  <constant>DOMAIN</constant> and <constant>SERVER</constant>
mode security is really just a variation on SMB user level security.
</para>

<para>
Actually, this issue is also closely tied to the debate on whether 
or not Samba must be the domain master browser for its workgroup
when operating as a DC.  While it may technically be possible
to configure a server as such (after all, browsing and domain logons
are two distinctly different functions), it is not a good idea to do
so.  You should remember that the DC must register the DOMAIN#1b NetBIOS 
name.  This is the name used by Windows clients to locate the DC.
Windows clients do not distinguish between the DC and the DMB.
For this reason, it is very wise to configure the Samba DC as the DMB.
</para>

<para>
Now back to the issue of configuring a Samba DC to use a mode other
than "security = user".  If a Samba host is configured to use 
another SMB server or DC in order to validate user connection 
requests, then it is a fact that some other machine on the network 
(the "password server") knows more about the user than the Samba host.
99% of the time, this other host is a domain controller.  Now 
in order to operate in domain mode security, the "workgroup" parameter
must be set to the name of the Windows NT domain (which already 
has a domain controller, right?)
</para>

<para>
Therefore configuring a Samba box as a DC for a domain that 
already by definition has a PDC is asking for trouble.
Therefore, you should always configure the Samba DC to be the DMB
for its domain.
</para>
</warning>

</sect2>

</sect1>

<sect1>
<title>Common Problems and Errors</title>

<sect2>
<title>I cannot include a '$' in a machine name</title>
<para>
A 'machine name' in (typically) <filename>/etc/passwd</filename> 	
of the machine name with a '$' appended. FreeBSD (and other BSD 
systems?) won't create a user with a '$' in their name.
</para>

<para>
The problem is only in the program used to make the entry. Once made, it works perfectly.
Create a user without the '$' using <command>vipw</command> to edit the entry, adding
the '$'. Or create the whole entry with vipw if you like, make sure you use a unique User ID!
</para>
</sect2>

<sect2>
<title>I get told "You already have a connection to the Domain...." 
or "Cannot join domain, the credentials supplied conflict with an 
existing set.." when creating a machine trust account.</title>

<para>
This happens if you try to create a machine trust account from the 
machine itself and already have a connection (e.g. mapped drive) 
to a share (or IPC$) on the Samba PDC.  The following command
will remove all network drive connections:
</para>

<para>
<prompt>C:\WINNT\></prompt> <command>net use * /d</command>
</para>

<para>
Further, if the machine is already a 'member of a workgroup' that 
is the same name as the domain you are joining (bad idea) you will 
get this message.  Change the workgroup name to something else, it 
does not matter what, reboot, and try again.
</para>
</sect2>

<sect2>
<title>The system can not log you on (C000019B)....</title>

<para>I joined the domain successfully but after upgrading 
to a newer version of the Samba code I get the message, "The system 
can not log you on (C000019B), Please try again or consult your 
system administrator" when attempting to logon.
</para>

<para>
This occurs when the domain SID stored in the secrets.tdb database
is changed. The most common cause of a change in domain SID is when
the domain name and/or the server name (netbios name) is changed.
The only way to correct the problem is to restore the original domain 
SID or remove the domain client from the domain and rejoin. The domain
SID may be reset using either the net or rpcclient utilities.
</para>

<para>
The reset or change the domain SID you can use the net command as follows:

<programlisting>
	net getlocalsid 'OLDNAME'
	net setlocalsid 'SID'
</programlisting>
</para>

</sect2>

<sect2>
<title>The machine trust account for this computer either does not 
exist or is not accessible.</title>

<para>
When I try to join the domain I get the message "The machine account 
for this computer either does not exist or is not accessible". What's 
wrong?
</para>

<para>
This problem is caused by the PDC not having a suitable machine trust account. 
If you are using the <parameter>add machine script</parameter> method to create 
accounts then this would indicate that it has not worked. Ensure the domain 
admin user system is working.
</para>

<para>
Alternatively if you are creating account entries manually then they 
have not been created correctly. Make sure that you have the entry 
correct for the machine trust account in smbpasswd file on the Samba PDC. 
If you added the account using an editor rather than using the smbpasswd 
utility, make sure that the account name is the machine NetBIOS name 
with a '$' appended to it ( i.e. computer_name$ ). There must be an entry 
in both /etc/passwd and the smbpasswd file. Some people have reported 
that inconsistent subnet masks between the Samba server and the NT 
client have caused this problem.   Make sure that these are consistent 
for both client and server.
</para>
</sect2>

<sect2>
<title>When I attempt to login to a Samba Domain from a NT4/W2K workstation,
I get a message about my account being disabled.</title>

<para>
At first be ensure to enable the useraccounts with <command>smbpasswd -e 
%user%</command>, this is normally done, when you create an account.
</para>

</sect2>
</sect1>
</chapter>