summaryrefslogtreecommitdiff
path: root/docs/textdocs/DHCP-Server-Configuration.txt
blob: 74cf0a84c34d42abdbba242e265d3db727a707d4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
!==
!== DHCP-Server-Configuration.txt for Samba release 2.0.0-beta1 13 Nov 1998
!==
Subject:	DHCP Server Configuration for SMB Clients
Date:		March 1, 1998
Contributor:	John H Terpstra <jht@samba.org>
Support:	This is an unsupported document. Refer to documentation that is
		supplied with the ISC DHCP Server. Do NOT email the contributor
		for ANY assistance.
===============================================================================

Background:
===========

We wish to help those folks who wish to use the ISC DHCP Server and provide
sample configuration settings. Red Hat Linux 5.0 is one operating system that
comes supplied with the ISC DHCP Server. ISC DHCP is available from
		ftp://ftp.isc.org/isc/dhcp

Incorrect configuration of MS Windows clients (Windows95, Windows NT Server and
Workstation) will lead to problems with browsing and with general network
operation. Windows 95 users often report problems where the TCP/IP and related
network settings will inadvertantly become reset at machine start-up resulting
in loss of configuration settings. This results in increased maintenance
overheads as well as serious user frustration.

In recent times users on one mailing list incorrectly attributed the cause of
network operating problems to incorrect configuration of Samba.

One user insisted that the only way to provent Windows95 from periodically
performing a full system reset and hardware detection process on start-up was
to install the NetBEUI protocol in addition to TCP/IP.

In the first place, there is NO need for NetBEUI. All Microsoft Windows clients
natively run NetBIOS over TCP/IP, and that is the only protocol that is
recognised by Samba. Installation of NetBEUI and/or NetBIOS over IPX will
cause problems with browse list operation on most networks. Even Windows NT
networks experience these problems when incorrectly configured Windows95
systems share the same name space. It is important that only those protocols
that are strictly needed for site specific reasons should EVER be installed.

Secondly, and totally against common opinion, DHCP is NOT an evil design but is
an extension of the BOOTP protocol that has been in use in Unix environments
for many years without any of the melt-down problems that some sensationalists
would have us believe can be experienced with DHCP. In fact, DHCP in covered by
rfc1541 and is a very safe method of keeping an MS Windows desktop environment
under control and for ensuring stable network operation.

While it is true that the Microsoft DHCP server that comes with Windows NT
Server provides only a sub-set of rfc1533 functionality this is hardly an issue
in those sites that already have a large investment and commitment to Unix
systems and technologies. The current state of the art of the DHCP Server
specification in covered in rfc2132.

This document aims to provide enough background information so that the
majority of site can without too much hardship get the Internet Software
Consortium's (ISC) DHCP Server into operation. The key benefits of using DHCP
includes:

1) Automated IP Address space management and maximised re-use of available IP
Addresses,

2) Automated control of MS Windows client TCP/IP network configuration,

3) Automatic recovery from start-up and run-time problems with Windows95.



Client Configuration for SMB Networking:
========================================
SMB network clients need to be configured so that all standard TCP/IP name to
address resolution works correctly. Once this has been achieved the SMB
environment provides additional tools and services that act as helper agents in
the translation of SMB (NetBIOS) names to their appropriate IP Addresses. One
such helper agent is the NetBIOS Name Server (NBNS) or as Microsoft called it
in their Windows NT Server implementation WINS (Windows Internet Name Server).

A client needs to be configured so that it has a unique Machine (Computer)
Name. This can NOT be done via DHCP and must be assigned when MS Windows
networking is first installed. All remaining TCP/IP networking parameters can
be assigned via DHCP. These include:

a) IP Address,
b) Netmask,
c) Gateway (Router) Address,
d) DNS Domain Name,
e) DNS Server addresses,
f) WINS (NBNS) Server addresses,
g) IP Forwarding,
h) Timezone offset, 
i) Node Type,

Other assignments can be made from a DHCP server too, but the above cover the
major needs.


DHCP Server Installation:
=========================
It is assumed that you will have obtained a copy of the GPL'd ISC DHCP server
source files from ftp://ftp.isc.org/isc/dhcp, it is also assumed that you have
compiled the sources and have installed the binary files.

The following simply serves to provide sample configuration files to enable
dhcpd to operate. The sample files assume that your site is configured to use
private IP network address space using the Class B range of 172.16.1.0 -
172.16.1.255 and is using a netmask of 255.255.255.0 (ie:24 bits). It is
assumed that your router to the outside world is at 172.16.1.254 and that your
Internet Domain Name is bestnet.com.au. The IP Address range 172.16.1.100 to
172.16.1.240 has been set aside as your dynamically allocated range. In
addition, bestnet.com.au have two print servers that need to obtain settings
via BOOTP. The machine linux.bestnet.com.au has IP address 172.16.1.1 and is
you primary Samba server with WINS support enabled by adding the parameter to
the /etc/smb.conf file: [globals] wins support = yes. The dhcp lease time will
be set to 20 hours.

Configuration Files:
====================
Before dhcpd will run you need to install a file that speifies the
configuration settings, and another that holds the database of issued IP
addresses. On many systems these are stored in the /etc directory on the Unix
system.

Example /etc/dhcpd.conf:
========================
server-identifier linux.bestnet.com.au;

subnet 172.16.1.0 netmask 255.255.255.0 {
	range 172.16.1.100 172.16.1.240;
	default-lease-time 72000;
	max-lease-time 144000;
	option subnet-mask 255.255.255.0;
	option broadcast-address 172.16.1.255;
	option routers 172.16.1.254;
	option domain-name-servers 172.16.1.1, 172.16.1.2;
	option domain-name "bestnet.com.au";
	option time-offset 39600;
	option ip-forwarding off;
	option netbios-name-servers 172.16.0.1;
	option netbios-dd-server 172.16.0.1;
	option netbios-node-type 8;
}

group {
	next-server 172.16.1.10;
	option subnet-mask 255.255.255.0;
	option domain-name "bestnet.com.au";
	option domain-name-servers 172.16.1.1, 172.16.0.2;
	option netbios-name-servers 172.16.0.1;
	option netbios-dd-server 172.16.0.1;
	option netbios-node-type 8;
	option routers 172.16.1.240;
	option time-offset 39600;
	host lexmark1 {
		hardware ethernet 06:07:08:09:0a:0b;
		fixed-address 172.16.1.245;
	}
	host epson4 {
		hardware ethernet 01:02:03:04:05:06;
		fixed-address 172.16.1.242;
	}
}


Creating the /etc/dhcpd.leases file:
====================================
At a Unix shell create an empty dhcpd.leases file in the /etc directory.
You can do this by typing:	cp /dev/null /etc/dhcpd.leases


Setting up a route table for all-ones addresses:
================================================
Quoting from the README file that comes with th eISC DHCPD Server:

                              BROADCAST

In order for dhcpd to work correctly with picky DHCP clients (e.g.,
Windows 95), it must be able to send packets with an IP destination
address of 255.255.255.255.  Unfortunately, Linux insists on changing
255.255.255.255 into the local subnet broadcast address (here, that's
192.5.5.223).  This results in a DHCP protocol violation, and while
many DHCP clients don't notice the problem, some (e.g., all Microsoft
DHCP clients) do.  Clients that have this problem will appear not to
see DHCPOFFER messages from the server.

It is possible to work around this problem on some versions of Linux
by creating a host route from your network interface address to
255.255.255.255.   The command you need to use to do this on Linux
varies from version to version.   The easiest version is:

	route add -host 255.255.255.255 dev eth0

On some older Linux systems, you will get an error if you try to do
this.   On those systems, try adding the following entry to your
/etc/hosts file:

255.255.255.255	all-ones

Then, try:

	route add -host all-ones dev eth0


For more information please refer to the ISC DHCPD Server documentation.