path: root/source3/include/smb.h

/* 
   Unix SMB/CIFS implementation.
   SMB parameters and setup, plus a whole lot more.
   
   Copyright (C) Andrew Tridgell              1992-2000
   Copyright (C) John H Terpstra              1996-2000
   Copyright (C) Luke Kenneth Casson Leighton 1996-2000
   Copyright (C) Paul Ashton                  1998-2000
   Copyright (C) Simo Sorce                   2001-2002
   Copyright (C) Martin Pool		      2002
   
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#ifndef _SMB_H
#define _SMB_H

#if defined(LARGE_SMB_OFF_T)
#define BUFFER_SIZE (128*1024)
#else /* no large readwrite possible */
#define BUFFER_SIZE (0xFFFF)
#endif

#define SAFETY_MARGIN 1024
#define LARGE_WRITEX_HDR_SIZE 65

#define NMB_PORT 137
#define DGRAM_PORT 138
#define SMB_PORT 139

#define False (0)
#define True (1)
#define Auto (2)

#ifndef _BOOL
typedef int BOOL;
#define _BOOL       /* So we don't typedef BOOL again in vfs.h */
#endif

/* limiting size of ipc replies */
#define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024))

#define SIZEOFWORD 2

#ifndef DEF_CREATE_MASK
#define DEF_CREATE_MASK (0755)
#endif

/* string manipulation flags - see clistr.c and srvstr.c */
#define STR_TERMINATE 1
#define STR_UPPER 2
#define STR_ASCII 4
#define STR_UNICODE 8
#define STR_NOALIGN 16

/* how long to wait for secondary SMB packets (milli-seconds) */
#define SMB_SECONDARY_WAIT (60*1000)

/* Debugging stuff */
#include "debug.h"

/* this defines the error codes that receive_smb can put in smb_read_error */
#define READ_TIMEOUT 1
#define READ_EOF 2
#define READ_ERROR 3

#define DIR_STRUCT_SIZE 43

/* these define the attribute byte as seen by DOS */
#define aRONLY (1L<<0)		/* 0x01 */
#define aHIDDEN (1L<<1)		/* 0x02 */
#define aSYSTEM (1L<<2)		/* 0x04 */
#define aVOLID (1L<<3)		/* 0x08 */
#define aDIR (1L<<4)		/* 0x10 */
#define aARCH (1L<<5)		/* 0x20 */

/* deny modes */
#define DENY_DOS 0
#define DENY_ALL 1
#define DENY_WRITE 2
#define DENY_READ 3
#define DENY_NONE 4
#define DENY_FCB 7

/* open modes */
#define DOS_OPEN_RDONLY 0
#define DOS_OPEN_WRONLY 1
#define DOS_OPEN_RDWR 2
#define DOS_OPEN_FCB 0xF

/* define shifts and masks for share and open modes. */
#define OPEN_MODE_MASK 0xF
#define SHARE_MODE_SHIFT 4
#define SHARE_MODE_MASK 0x7
#define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
#define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
#define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK)
#define SET_DENY_MODE(x) (((x) & SHARE_MODE_MASK) <<SHARE_MODE_SHIFT)

/* Sync on open file (not sure if used anymore... ?) */
#define FILE_SYNC_OPENMODE (1<<14)
#define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)

/* allow delete on open file mode (used by NT SMB's). */
#define ALLOW_SHARE_DELETE (1<<15)
#define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False)
#define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0)

/* delete on close flag (used by NT SMB's). */
#define DELETE_ON_CLOSE_FLAG (1<<16)
#define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False)
#define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0)

/* open disposition values */
#define FILE_EXISTS_FAIL 0
#define FILE_EXISTS_OPEN 1
#define FILE_EXISTS_TRUNCATE 2

/* mask for open disposition. */
#define FILE_OPEN_MASK 0x3

#define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
#define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)

/* The above can be OR'ed with... */
#define FILE_CREATE_IF_NOT_EXIST 0x10
#define FILE_FAIL_IF_NOT_EXIST 0

#define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST))

/* share types */
#define STYPE_DISKTREE  0	/* Disk drive */
#define STYPE_PRINTQ    1	/* Spooler queue */
#define STYPE_DEVICE    2	/* Serial device */
#define STYPE_IPC       3	/* Interprocess communication (IPC) */
#define STYPE_HIDDEN    0x80000000 /* share is a hidden one (ends with $) */

#include "doserr.h"

/*
 * SMB UCS2 (16-bit unicode) internal type.
 */

typedef uint16 smb_ucs2_t;

/* ucs2 string types. */
typedef smb_ucs2_t wpstring[PSTRING_LEN];
typedef smb_ucs2_t wfstring[FSTRING_LEN];


#ifdef WORDS_BIGENDIAN
#define UCS2_SHIFT 8
#else
#define UCS2_SHIFT 0
#endif

/* turn a 7 bit character into a ucs2 character */
#define UCS2_CHAR(c) ((c) << UCS2_SHIFT)

/* pipe string names */
#define PIPE_LANMAN   "\\PIPE\\LANMAN"
#define PIPE_SRVSVC   "\\PIPE\\srvsvc"
#define PIPE_SAMR     "\\PIPE\\samr"
#define PIPE_WINREG   "\\PIPE\\winreg"
#define PIPE_WKSSVC   "\\PIPE\\wkssvc"
#define PIPE_NETLOGON "\\PIPE\\NETLOGON"
#define PIPE_NTLSA    "\\PIPE\\ntlsa"
#define PIPE_NTSVCS   "\\PIPE\\ntsvcs"
#define PIPE_LSASS    "\\PIPE\\lsass"
#define PIPE_LSARPC   "\\PIPE\\lsarpc"
#define PIPE_SPOOLSS  "\\PIPE\\spoolss"
#define PIPE_NETDFS   "\\PIPE\\netdfs"

/* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
typedef struct nttime_info
{
  uint32 low;
  uint32 high;
} NTTIME;


/* The Splint code analysis tool doesn't like immediate structures. */

#ifdef _SPLINT_                      /* http://www.splint.org */
#undef HAVE_IMMEDIATE_STRUCTURES
#endif

/* the following rather strange looking definitions of NTSTATUS and WERROR
   and there in order to catch common coding errors where different error types
   are mixed up. This is especially important as we slowly convert Samba
   from using BOOL for internal functions 
*/

#if defined(HAVE_IMMEDIATE_STRUCTURES)
typedef struct {uint32 v;} NTSTATUS;
#define NT_STATUS(x) ((NTSTATUS) { x })
#define NT_STATUS_V(x) ((x).v)
#else
typedef uint32 NTSTATUS;
#define NT_STATUS(x) (x)
#define NT_STATUS_V(x) (x)
#endif

#if defined(HAVE_IMMEDIATE_STRUCTURES)
typedef struct {uint32 v;} WERROR;
#define W_ERROR(x) ((WERROR) { x })
#define W_ERROR_V(x) ((x).v)
#else
typedef uint32 WERROR;
#define W_ERROR(x) (x)
#define W_ERROR_V(x) (x)
#endif

#define NT_STATUS_IS_OK(x) (NT_STATUS_V(x) == 0)
#define NT_STATUS_IS_ERR(x) ((NT_STATUS_V(x) & 0xc0000000) == 0xc0000000)
#define NT_STATUS_EQUAL(x,y) (NT_STATUS_V(x) == NT_STATUS_V(y))
#define W_ERROR_IS_OK(x) (W_ERROR_V(x) == 0)


/* Allowable account control bits */
#define ACB_DISABLED   0x0001  /* 1 = User account disabled */
#define ACB_HOMDIRREQ  0x0002  /* 1 = Home directory required */
#define ACB_PWNOTREQ   0x0004  /* 1 = User password not required */
#define ACB_TEMPDUP    0x0008  /* 1 = Temporary duplicate account */
#define ACB_NORMAL     0x0010  /* 1 = Normal user account */
#define ACB_MNS        0x0020  /* 1 = MNS logon user account */
#define ACB_DOMTRUST   0x0040  /* 1 = Interdomain trust account */
#define ACB_WSTRUST    0x0080  /* 1 = Workstation trust account */
#define ACB_SVRTRUST   0x0100  /* 1 = Server trust account */
#define ACB_PWNOEXP    0x0200  /* 1 = User password does not expire */
#define ACB_AUTOLOCK   0x0400  /* 1 = Account auto locked */
 
#define MAX_HOURS_LEN 32

#ifndef MAXSUBAUTHS
#define MAXSUBAUTHS 15 /* max sub authorities in a SID */
#endif

/**
 * @brief Security Identifier
 *
 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
 **/
typedef struct sid_info
{
  uint8  sid_rev_num;             /**< SID revision number */
  uint8  num_auths;               /**< Number of sub-authorities */
  uint8  id_auth[6];              /**< Identifier Authority */
  /*
   *  Pointer to sub-authorities.
   *
   * @note The values in these uint32's are in *native* byteorder, not
   * neccessarily little-endian...... JRA.
   */
  uint32 sub_auths[MAXSUBAUTHS];  

} DOM_SID;

/*
 * The complete list of SIDS belonging to this user.
 * Created when a vuid is registered.
 * The definition of the user_sids array is as follows :
 *
 * token->user_sids[0] = primary user SID.
 * token->user_sids[1] = primary group SID.
 * token->user_sids[2..num_sids] = supplementary group SIDS.
 */

#define PRIMARY_USER_SID_INDEX 0
#define PRIMARY_GROUP_SID_INDEX 1

typedef struct _nt_user_token {
	size_t num_sids;
	DOM_SID *user_sids;
} NT_USER_TOKEN;

/*** query a local group, get a list of these: shows who is in that group ***/

/* local group member info */
typedef struct local_grp_member_info
{
	DOM_SID sid    ; /* matches with name */
	uint8   sid_use; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */
	fstring name   ; /* matches with sid: must be of the form "DOMAIN\account" */

} LOCAL_GRP_MEMBER;

/* enumerate these to get list of local groups */

/* local group info */
typedef struct local_grp_info
{
	fstring name;
	fstring comment;

} LOCAL_GRP;

/*** enumerate these to get list of domain groups ***/

/* domain group member info */
typedef struct domain_grp_info
{
	fstring name;
	fstring comment;
	uint32  rid; /* group rid */
	uint8   attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */

} DOMAIN_GRP;

/*** query a domain group, get a list of these: shows who is in that group ***/

/* domain group info */
typedef struct domain_grp_member_info
{
	fstring name;
	uint8   attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */

} DOMAIN_GRP_MEMBER;

/* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
typedef struct time_info
{
  uint32 time;
} UTIME;

/* Structure used when SMBwritebmpx is active */
typedef struct
{
  size_t wr_total_written; /* So we know when to discard this */
  int32 wr_timeout;
  int32 wr_errclass;
  int32 wr_error; /* Cached errors */
  BOOL  wr_mode; /* write through mode) */
  BOOL  wr_discard; /* discard all further data */
} write_bmpx_struct;

typedef struct write_cache
{
    SMB_OFF_T file_size;
    SMB_OFF_T offset;
    size_t alloc_size;
    size_t data_size;
    char *data;
} write_cache;

typedef struct
{
	smb_ucs2_t *origname;
	smb_ucs2_t *filename;
	SMB_STRUCT_STAT *statinfo;
} smb_filename;


typedef struct files_struct
{
	struct files_struct *next, *prev;
	int fnum;
	struct connection_struct *conn;
	int fd;
	int print_jobid;
	SMB_DEV_T dev;
	SMB_INO_T inode;
	BOOL delete_on_close;
	SMB_OFF_T pos;
	SMB_OFF_T size;
	mode_t mode;
	uint16 vuid;
	write_bmpx_struct *wbmpx_ptr;
	write_cache *wcp;
	struct timeval open_time;
	int share_mode;
	uint32 desired_access;
	time_t pending_modtime;
	int oplock_type;
	int sent_oplock_break;
	unsigned long file_id;
	BOOL can_lock;
	BOOL can_read;
	BOOL can_write;
	BOOL print_file;
	BOOL modified;
	BOOL is_directory;
	BOOL directory_delete_on_close;
	char *fsp_name;
} files_struct;

/* used to hold an arbitrary blob of data */
typedef struct data_blob {
	uint8 *data;
	size_t length;
	void (*free)(struct data_blob *data_blob);
} DATA_BLOB;

/*
 * Structure used to keep directory state information around.
 * Used in NT change-notify code.
 */

typedef struct
{
  time_t modify_time;
  time_t status_time;
} dir_status_struct;

struct uid_cache {
  int entries;
  uid_t list[UID_CACHE_SIZE];
};

typedef struct
{
  char *name;
  BOOL is_wild;
} name_compare_entry;

/* Include VFS stuff */

#include "smb_acls.h"
#include "vfs.h"

typedef struct connection_struct
{
	struct connection_struct *next, *prev;
	unsigned cnum; /* an index passed over the wire */
	int service;
	BOOL force_user;
	struct uid_cache uid_cache;
	void *dirptr;
	BOOL printer;
	BOOL ipc;
	BOOL read_only;
	BOOL admin_user;
	char *dirpath;
	char *connectpath;
	char *origpath;

	struct vfs_ops vfs_ops;                   /* Filesystem operations */
	/* Handle on dlopen() call */
	void *dl_handle;
	void *vfs_private;

	char *user; /* name of user who *opened* this connection */
	uid_t uid; /* uid of user who *opened* this connection */
	gid_t gid; /* gid of user who *opened* this connection */
	char client_address[18]; /* String version of client IP address. */

	uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */

	/* following groups stuff added by ih */

	/* This groups info is valid for the user that *opened* the connection */
	int ngroups;
	gid_t *groups;
	NT_USER_TOKEN *nt_user_token;
	
	time_t lastused;
	BOOL used;
	int num_files_open;
	name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
	name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
	name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */       

} connection_struct;

struct current_user
{
	connection_struct *conn;
	uint16 vuid;
	uid_t uid;
	gid_t gid;
	int ngroups;
	gid_t *groups;
	NT_USER_TOKEN *nt_user_token;
};

/* Defines for the sent_oplock_break field above. */
#define NO_BREAK_SENT 0
#define EXCLUSIVE_BREAK_SENT 1
#define LEVEL_II_BREAK_SENT 2

typedef struct {
	fstring smb_name; /* user name from the client */
	fstring unix_name; /* unix user name of a validated user */
	fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
	fstring domain; /* domain that the client specified */
} userdom_struct;

/* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */

enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
      LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};

typedef struct _print_queue_struct
{
  int job;
  int size;
  int page_count;
  int status;
  int priority;
  time_t time;
  fstring fs_user;
  fstring fs_file;
} print_queue_struct;

enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};

typedef struct
{
  fstring message;
  int qcount;
  int status;
}  print_status_struct;

/* used for server information: client, nameserv and ipc */
struct server_info_struct
{
  fstring name;
  uint32 type;
  fstring comment;
  fstring domain; /* used ONLY in ipc.c NOT namework.c */
  BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
};


/* used for network interfaces */
struct interface
{
	struct interface *next, *prev;
	struct in_addr ip;
	struct in_addr bcast;
	struct in_addr nmask;
};

/* struct returned by get_share_modes */
typedef struct {
	pid_t pid;
	uint16 op_port;
	uint16 op_type;
	int share_mode;
	uint32 desired_access;
	struct timeval time;
	SMB_DEV_T dev;
	SMB_INO_T inode;
	unsigned long share_file_id;
} share_mode_entry;


#define SHAREMODE_FN_CAST() \
	void (*)(share_mode_entry *, char*)

#define SHAREMODE_FN(fn) \
	void (*fn)(share_mode_entry *, char*)

#define NT_HASH_LEN 16
#define LM_HASH_LEN 16

/*
 * bit flags representing initialized fields in SAM_ACCOUNT
 */
#define FLAG_SAM_UNINIT		0x00000000
#define FLAG_SAM_UID		0x00000001
#define FLAG_SAM_GID		0x00000002
#define FLAG_SAM_SMBHOME	0x00000004
#define FLAG_SAM_PROFILE	0x00000008
#define FLAG_SAM_DRIVE          0x00000010
#define FLAG_SAM_LOGONSCRIPT	0x00000020
#define FLAG_SAM_LOGONTIME	0x00000040
#define FLAG_SAM_LOGOFFTIME	0x00000080
#define FLAG_SAM_KICKOFFTIME	0x00000100
#define FLAG_SAM_CANCHANGETIME	0x00000200
#define FLAG_SAM_MUSTCHANGETIME	0x00000400
#define FLAG_SAM_PLAINTEXT_PW   0x00000800

#define IS_SAM_UNIX_USER(x) \
	((pdb_get_init_flag(x) & FLAG_SAM_UID) \
	 && (pdb_get_init_flag(x) & FLAG_SAM_GID))

#define IS_SAM_SET(x, flag)	((x)->private.init_flag & (flag))
		
typedef struct sam_passwd
{
	TALLOC_CTX *mem_ctx;
	
	void (*free_fn)(struct sam_passwd **);

	struct pdb_methods *methods;

	struct user_data {
		/* initiailization flags */
		uint32 init_flag;
		
		time_t logon_time;            /* logon time */
		time_t logoff_time;           /* logoff time */
		time_t kickoff_time;          /* kickoff time */
		time_t pass_last_set_time;    /* password last set time */
		time_t pass_can_change_time;  /* password can change time */
		time_t pass_must_change_time; /* password must change time */
		
		char * username;     /* UNIX username string */
		char * domain;       /* Windows Domain name */
		char * nt_username;  /* Windows username string */
		char * full_name;    /* user's full name string */
		char * unix_home_dir;     /* UNIX home directory string */
		char * home_dir;     /* home directory string */
		char * dir_drive;    /* home directory drive string */
		char * logon_script; /* logon script string */
		char * profile_path; /* profile path string */
		char * acct_desc  ;  /* user description string */
		char * workstations; /* login from workstations string */
		char * unknown_str ; /* don't know what this is, yet. */
		char * munged_dial ; /* munged path name and dial-back tel number */
		
		uid_t uid;          /* this is a unix uid_t */
		gid_t gid;          /* this is a unix gid_t */
		DOM_SID user_sid;    /* Primary User SID */
		DOM_SID group_sid;   /* Primary Group SID */
		
		DATA_BLOB lm_pw; /* .data is Null if no password */
		DATA_BLOB nt_pw; /* .data is Null if no password */
		DATA_BLOB plaintext_pw; /* .data is Null if not available */
		
		uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */
		uint32 unknown_3; /* 0x00ff ffff */
		
		uint16 logon_divs; /* 168 - number of hours in a week */
		uint32 hours_len; /* normally 21 bytes */
		uint8 hours[MAX_HOURS_LEN];
		
		uint32 unknown_5; /* 0x0002 0000 */
		uint32 unknown_6; /* 0x0000 04ec */
	} private;

	/* Lets see if the remaining code can get the hint that you
	   are meant to use the pdb_...() functions. */
	
} SAM_ACCOUNT;

/*
 * Flags for account policy.
 */
#define AP_MIN_PASSWORD_LEN 		1
#define AP_PASSWORD_HISTORY		2
#define AP_USER_MUST_LOGON_TO_CHG_PASS	3
#define AP_MAX_PASSWORD_AGE		4
#define AP_MIN_PASSWORD_AGE		5
#define AP_LOCK_ACCOUNT_DURATION	6
#define AP_RESET_COUNT_TIME		7
#define AP_BAD_ATTEMPT_LOCKOUT		8
#define AP_TIME_TO_LOGOUT		9


/*
 * Flags for local user manipulation.
 */

#define LOCAL_ADD_USER 0x1
#define LOCAL_DELETE_USER 0x2
#define LOCAL_DISABLE_USER 0x4
#define LOCAL_ENABLE_USER 0x8
#define LOCAL_TRUST_ACCOUNT 0x10
#define LOCAL_SET_NO_PASSWORD 0x20
#define LOCAL_SET_PASSWORD 0x40
#define LOCAL_SET_LDAP_ADMIN_PW 0x80
#define LOCAL_INTERDOM_ACCOUNT 0x100
#define LOCAL_AM_ROOT 0x200  /* Act as root */

/* key and data in the connections database - used in smbstatus and smbd */
struct connections_key {
	pid_t pid;
	int cnum;
	fstring name;
};

struct connections_data {
	int magic;
	pid_t pid;
	int cnum;
	uid_t uid;
	gid_t gid;
	char name[24];
	char addr[24];
	char machine[FSTRING_LEN];
	time_t start;
};


/* key and data records in the tdb locking database */
struct locking_key {
	SMB_DEV_T dev;
	SMB_INO_T inode;
};

struct locking_data {
	union {
		int num_share_mode_entries;
		share_mode_entry dummy; /* Needed for alignment. */
	} u;
	/* the following two entries are implicit 
	   share_mode_entry modes[num_share_mode_entries];
           char file_name[];
	*/
};


/* the following are used by loadparm for option lists */
typedef enum
{
  P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
  P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
} parm_type;

typedef enum
{
  P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
} parm_class;

/* passed to br lock code */
enum brl_type {READ_LOCK, WRITE_LOCK};

struct enum_list {
	int value;
	char *name;
};

#define BRLOCK_FN_CAST() \
	void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
				 enum brl_type lock_type, \
				 br_off start, br_off size)
#define BRLOCK_FN(fn) \
	void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
				 enum brl_type lock_type, \
				 br_off start, br_off size)
struct parm_struct
{
	char *label;
	parm_type type;
	parm_class class;
	void *ptr;
	BOOL (*special)(char *, char **);
	struct enum_list *enum_list;
	unsigned flags;
	union {
		BOOL bvalue;
		int ivalue;
		char *svalue;
		char cvalue;
		char **lvalue;
	} def;
};

struct bitmap {
	uint32 *b;
	int n;
};

#define FLAG_BASIC 	0x01 /* fundamental options */
#define FLAG_SHARE 	0x02 /* file sharing options */
#define FLAG_PRINT 	0x04 /* printing options */
#define FLAG_GLOBAL 	0x08 /* local options that should be globally settable in SWAT */
#define FLAG_DEPRECATED 0x10 /* options that should no longer be used */
#define FLAG_HIDE  	0x20 /* options that should be hidden in SWAT */

#ifndef LOCKING_VERSION
#define LOCKING_VERSION 4
#endif /* LOCKING_VERSION */


/* the basic packet size, assuming no words or bytes */
#define smb_size 39

/* offsets into message for common items */
#define smb_com 8
#define smb_rcls 9
#define smb_reh 10
#define smb_err 11
#define smb_flg 13
#define smb_flg2 14
#define smb_pidhigh 16
#define smb_ss_field 18
#define smb_tid 28
#define smb_pid 30
#define smb_uid 32
#define smb_mid 34
#define smb_wct 36
#define smb_vwv 37
#define smb_vwv0 37
#define smb_vwv1 39
#define smb_vwv2 41
#define smb_vwv3 43
#define smb_vwv4 45
#define smb_vwv5 47
#define smb_vwv6 49
#define smb_vwv7 51
#define smb_vwv8 53
#define smb_vwv9 55
#define smb_vwv10 57
#define smb_vwv11 59
#define smb_vwv12 61
#define smb_vwv13 63
#define smb_vwv14 65
#define smb_vwv15 67
#define smb_vwv16 69
#define smb_vwv17 71

/* flag defines. CIFS spec 3.1.1 */
#define FLAG_SUPPORT_LOCKREAD       0x01
#define FLAG_CLIENT_BUF_AVAIL       0x02
#define FLAG_RESERVED               0x04
#define FLAG_CASELESS_PATHNAMES     0x08
#define FLAG_CANONICAL_PATHNAMES    0x10
#define FLAG_REQUEST_OPLOCK         0x20
#define FLAG_REQUEST_BATCH_OPLOCK   0x40
#define FLAG_REPLY                  0x80

/* the complete */
#define SMBmkdir      0x00   /* create directory */
#define SMBrmdir      0x01   /* delete directory */
#define SMBopen       0x02   /* open file */
#define SMBcreate     0x03   /* create file */
#define SMBclose      0x04   /* close file */
#define SMBflush      0x05   /* flush file */
#define SMBunlink     0x06   /* delete file */
#define SMBmv         0x07   /* rename file */
#define SMBgetatr     0x08   /* get file attributes */
#define SMBsetatr     0x09   /* set file attributes */
#define SMBread       0x0A   /* read from file */
#define SMBwrite      0x0B   /* write to file */
#define SMBlock       0x0C   /* lock byte range */
#define SMBunlock     0x0D   /* unlock byte range */
#define SMBctemp      0x0E   /* create temporary file */
#define SMBmknew      0x0F   /* make new file */
#define SMBchkpth     0x10   /* check directory path */
#define SMBexit       0x11   /* process exit */
#define SMBlseek      0x12   /* seek */
#define SMBtcon       0x70   /* tree connect */
#define SMBtconX      0x75   /* tree connect and X*/
#define SMBtdis       0x71   /* tree disconnect */
#define SMBnegprot    0x72   /* negotiate protocol */
#define SMBdskattr    0x80   /* get disk attributes */
#define SMBsearch     0x81   /* search directory */
#define SMBsplopen    0xC0   /* open print spool file */
#define SMBsplwr      0xC1   /* write to print spool file */
#define SMBsplclose   0xC2   /* close print spool file */
#define SMBsplretq    0xC3   /* return print queue */
#define SMBsends      0xD0   /* send single block message */
#define SMBsendb      0xD1   /* send broadcast message */
#define SMBfwdname    0xD2   /* forward user name */
#define SMBcancelf    0xD3   /* cancel forward */
#define SMBgetmac     0xD4   /* get machine name */
#define SMBsendstrt   0xD5   /* send start of multi-block message */
#define SMBsendend    0xD6   /* send end of multi-block message */
#define SMBsendtxt    0xD7   /* send text of multi-block message */

/* Core+ protocol */
#define SMBlockread	  0x13   /* Lock a range and read */
#define SMBwriteunlock 0x14 /* Unlock a range then write */
#define SMBreadbraw   0x1a  /* read a block of data with no smb header */
#define SMBwritebraw  0x1d  /* write a block of data with no smb header */
#define SMBwritec     0x20  /* secondary write request */
#define SMBwriteclose 0x2c  /* write a file then close it */

/* dos extended protocol */
#define SMBreadBraw      0x1A   /* read block raw */
#define SMBreadBmpx      0x1B   /* read block multiplexed */
#define SMBreadBs        0x1C   /* read block (secondary response) */
#define SMBwriteBraw     0x1D   /* write block raw */
#define SMBwriteBmpx     0x1E   /* write block multiplexed */
#define SMBwriteBs       0x1F   /* write block (secondary request) */
#define SMBwriteC        0x20   /* write complete response */
#define SMBsetattrE      0x22   /* set file attributes expanded */
#define SMBgetattrE      0x23   /* get file attributes expanded */
#define SMBlockingX      0x24   /* lock/unlock byte ranges and X */
#define SMBtrans         0x25   /* transaction - name, bytes in/out */
#define SMBtranss        0x26   /* transaction (secondary request/response) */
#define SMBioctl         0x27   /* IOCTL */
#define SMBioctls        0x28   /* IOCTL  (secondary request/response) */
#define SMBcopy          0x29   /* copy */
#define SMBmove          0x2A   /* move */
#define SMBecho          0x2B   /* echo */
#define SMBopenX         0x2D   /* open and X */
#define SMBreadX         0x2E   /* read and X */
#define SMBwriteX        0x2F   /* write and X */
#define SMBsesssetupX    0x73   /* Session Set Up & X (including User Logon) */
#define SMBffirst        0x82   /* find first */
#define SMBfunique       0x83   /* find unique */
#define SMBfclose        0x84   /* find close */
#define SMBkeepalive     0x85   /* keepalive */
#define SMBinvalid       0xFE   /* invalid command */

/* Extended 2.0 protocol */
#define SMBtrans2        0x32   /* TRANS2 protocol set */
#define SMBtranss2       0x33   /* TRANS2 protocol set, secondary command */
#define SMBfindclose     0x34   /* Terminate a TRANSACT2_FINDFIRST */
#define SMBfindnclose    0x35   /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
#define SMBulogoffX      0x74   /* user logoff */

/* NT SMB extensions. */
#define SMBnttrans       0xA0   /* NT transact */
#define SMBnttranss      0xA1   /* NT transact secondary */
#define SMBntcreateX     0xA2   /* NT create and X */
#define SMBntcancel      0xA4   /* NT cancel */

/* These are the TRANS2 sub commands */
#define TRANSACT2_OPEN                        0
#define TRANSACT2_FINDFIRST                   1
#define TRANSACT2_FINDNEXT                    2
#define TRANSACT2_QFSINFO                     3
#define TRANSACT2_SETFSINFO                   4
#define TRANSACT2_QPATHINFO                   5
#define TRANSACT2_SETPATHINFO                 6
#define TRANSACT2_QFILEINFO                   7
#define TRANSACT2_SETFILEINFO                 8
#define TRANSACT2_FSCTL                       9
#define TRANSACT2_IOCTL                     0xA
#define TRANSACT2_FINDNOTIFYFIRST           0xB
#define TRANSACT2_FINDNOTIFYNEXT            0xC
#define TRANSACT2_MKDIR                     0xD
#define TRANSACT2_SESSION_SETUP             0xE
#define TRANSACT2_GET_DFS_REFERRAL         0x10
#define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11

/* These are the NT transact sub commands. */
#define NT_TRANSACT_CREATE                1
#define NT_TRANSACT_IOCTL                 2
#define NT_TRANSACT_SET_SECURITY_DESC     3
#define NT_TRANSACT_NOTIFY_CHANGE         4
#define NT_TRANSACT_RENAME                5
#define NT_TRANSACT_QUERY_SECURITY_DESC   6

/* Relevant IOCTL codes */
#define IOCTL_QUERY_JOB_INFO      0x530060

/* these are the trans2 sub fields for primary requests */
#define smb_tpscnt smb_vwv0
#define smb_tdscnt smb_vwv1
#define smb_mprcnt smb_vwv2
#define smb_mdrcnt smb_vwv3
#define smb_msrcnt smb_vwv4
#define smb_flags smb_vwv5
#define smb_timeout smb_vwv6
#define smb_pscnt smb_vwv9
#define smb_psoff smb_vwv10
#define smb_dscnt smb_vwv11
#define smb_dsoff smb_vwv12
#define smb_suwcnt smb_vwv13
#define smb_setup smb_vwv14
#define smb_setup0 smb_setup
#define smb_setup1 (smb_setup+2)
#define smb_setup2 (smb_setup+4)

/* these are for the secondary requests */
#define smb_spscnt smb_vwv2
#define smb_spsoff smb_vwv3
#define smb_spsdisp smb_vwv4
#define smb_sdscnt smb_vwv5
#define smb_sdsoff smb_vwv6
#define smb_sdsdisp smb_vwv7
#define smb_sfid smb_vwv8

/* and these for responses */
#define smb_tprcnt smb_vwv0
#define smb_tdrcnt smb_vwv1
#define smb_prcnt smb_vwv3
#define smb_proff smb_vwv4
#define smb_prdisp smb_vwv5
#define smb_drcnt smb_vwv6
#define smb_droff smb_vwv7
#define smb_drdisp smb_vwv8

/* these are for the NT trans primary request. */
#define smb_nt_MaxSetupCount smb_vwv0
#define smb_nt_Flags (smb_vwv0 + 1)
#define smb_nt_TotalParameterCount (smb_vwv0 + 3)
#define smb_nt_TotalDataCount (smb_vwv0 + 7)
#define smb_nt_MaxParameterCount (smb_vwv0 + 11)
#define smb_nt_MaxDataCount (smb_vwv0 + 15)
#define smb_nt_ParameterCount (smb_vwv0 + 19)
#define smb_nt_ParameterOffset (smb_vwv0 + 23)
#define smb_nt_DataCount (smb_vwv0 + 27)
#define smb_nt_DataOffset (smb_vwv0 + 31)
#define smb_nt_SetupCount (smb_vwv0 + 35)
#define smb_nt_Function (smb_vwv0 + 36)
#define smb_nt_SetupStart (smb_vwv0 + 38)

/* these are for the NT trans secondary request. */
#define smb_nts_TotalParameterCount (smb_vwv0 + 3)
#define smb_nts_TotalDataCount (smb_vwv0 + 7)
#define smb_nts_ParameterCount (smb_vwv0 + 11)
#define smb_nts_ParameterOffset (smb_vwv0 + 15)
#define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
#define smb_nts_DataCount (smb_vwv0 + 23)
#define smb_nts_DataOffset (smb_vwv0 + 27)
#define smb_nts_DataDisplacement (smb_vwv0 + 31)

/* these are for the NT trans reply. */
#define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
#define smb_ntr_TotalDataCount (smb_vwv0 + 7)
#define smb_ntr_ParameterCount (smb_vwv0 + 11)
#define smb_ntr_ParameterOffset (smb_vwv0 + 15)
#define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
#define smb_ntr_DataCount (smb_vwv0 + 23)
#define smb_ntr_DataOffset (smb_vwv0 + 27)
#define smb_ntr_DataDisplacement (smb_vwv0 + 31)

/* these are for the NT create_and_X */
#define smb_ntcreate_NameLength (smb_vwv0 + 5)
#define smb_ntcreate_Flags (smb_vwv0 + 7)
#define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
#define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
#define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
#define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
#define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
#define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
#define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
#define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
#define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)

/* this is used on a TConX. I'm not sure the name is very helpful though */
#define SMB_SUPPORT_SEARCH_BITS        0x0001
#define SMB_SHARE_IN_DFS               0x0002

/* Named pipe write mode flags. Used in writeX calls. */
#define PIPE_RAW_MODE 0x4
#define PIPE_START_MESSAGE 0x8

/* these are the constants used in the above call. */
/* DesiredAccess */
/* File Specific access rights. */
#define FILE_READ_DATA        0x001
#define FILE_WRITE_DATA       0x002
#define FILE_APPEND_DATA      0x004
#define FILE_READ_EA          0x008
#define FILE_WRITE_EA         0x010
#define FILE_EXECUTE          0x020
#define FILE_DELETE_CHILD     0x040
#define FILE_READ_ATTRIBUTES  0x080
#define FILE_WRITE_ATTRIBUTES 0x100

#define FILE_ALL_ACCESS       0x1FF

/* the desired access to use when opening a pipe */
#define DESIRED_ACCESS_PIPE 0x2019f
 
/* Generic access masks & rights. */
#define SPECIFIC_RIGHTS_MASK 0x00FFFFL
#define STANDARD_RIGHTS_MASK 0xFF0000L
#define DELETE_ACCESS        (1L<<16) /* 0x00010000 */
#define READ_CONTROL_ACCESS  (1L<<17) /* 0x00020000 */
#define WRITE_DAC_ACCESS     (1L<<18) /* 0x00040000 */
#define WRITE_OWNER_ACCESS   (1L<<19) /* 0x00080000 */
#define SYNCHRONIZE_ACCESS   (1L<<20) /* 0x00100000 */

/* Combinations of standard masks. */
#define STANDARD_RIGHTS_ALL_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS|SYNCHRONIZE_ACCESS) /* 0x001f0000 */
#define STANDARD_RIGHTS_EXECUTE_ACCESS (READ_CONTROL_ACCESS) /* 0x00020000 */
#define STANDARD_RIGHTS_READ_ACCESS (READ_CONTROL_ACCESS) /* 0x00200000 */
#define STANDARD_RIGHTS_REQUIRED_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS) /* 0x000f0000 */
#define STANDARD_RIGHTS_WRITE_ACCESS (READ_CONTROL_ACCESS) /* 0x00020000 */

#define SYSTEM_SECURITY_ACCESS (1L<<24)	          /* 0x01000000 */
#define MAXIMUM_ALLOWED_ACCESS (1L<<25)	          /* 0x02000000 */
#define GENERIC_ALL_ACCESS     (1<<28)            /* 0x10000000 */
#define GENERIC_EXECUTE_ACCESS (1<<29)            /* 0x20000000 */
#define GENERIC_WRITE_ACCESS   (1<<30)            /* 0x40000000 */
#define GENERIC_READ_ACCESS   (((unsigned)1)<<31) /* 0x80000000 */

/* Mapping of generic access rights for files to specific rights. */

#define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)

#define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
							FILE_READ_EA|SYNCHRONIZE_ACCESS)

#define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
							FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)

#define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
								FILE_EXECUTE|SYNCHRONIZE_ACCESS)

/* Mapping of access rights to UNIX perms. */
#define UNIX_ACCESS_RWX		FILE_GENERIC_ALL
#define UNIX_ACCESS_R 		FILE_GENERIC_READ
#define UNIX_ACCESS_W		FILE_GENERIC_WRITE
#define UNIX_ACCESS_X		FILE_GENERIC_EXECUTE

#if 0
/*
 * This is the old mapping we used to use. To get W2KSP2 profiles
 * working we need to map to the canonical file perms.
 */
#define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
#define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
			FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
#define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
			FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
			FILE_APPEND_DATA|FILE_WRITE_DATA)
#define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
			FILE_EXECUTE|FILE_READ_ATTRIBUTES)
#endif

#define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)

/* Flags field. */
#define REQUEST_OPLOCK 2
#define REQUEST_BATCH_OPLOCK 4
#define OPEN_DIRECTORY 8

/* ShareAccess field. */
#define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
#define FILE_SHARE_READ 1
#define FILE_SHARE_WRITE 2
#define FILE_SHARE_DELETE 4

/* FileAttributesField */
#define FILE_ATTRIBUTE_READONLY aRONLY
#define FILE_ATTRIBUTE_HIDDEN aHIDDEN
#define FILE_ATTRIBUTE_SYSTEM aSYSTEM
#define FILE_ATTRIBUTE_DIRECTORY aDIR
#define FILE_ATTRIBUTE_ARCHIVE aARCH
#define FILE_ATTRIBUTE_NORMAL 0x80L
#define FILE_ATTRIBUTE_TEMPORARY 0x100L
#define FILE_ATTRIBUTE_SPARSE 0x200L
#define FILE_ATTRIBUTE_COMPRESSED 0x800L
#define FILE_ATTRIBUTE_NONINDEXED 0x2000L
#define SAMBA_ATTRIBUTES_MASK 0x7F

/* Flags - combined with attributes. */
#define FILE_FLAG_WRITE_THROUGH    0x80000000L
#define FILE_FLAG_NO_BUFFERING     0x20000000L
#define FILE_FLAG_RANDOM_ACCESS    0x10000000L
#define FILE_FLAG_SEQUENTIAL_SCAN  0x08000000L
#define FILE_FLAG_DELETE_ON_CLOSE  0x04000000L
#define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
#define FILE_FLAG_POSIX_SEMANTICS  0x01000000L

/* CreateDisposition field. */
#define FILE_SUPERSEDE 0
#define FILE_OPEN 1
#define FILE_CREATE 2
#define FILE_OPEN_IF 3
#define FILE_OVERWRITE 4
#define FILE_OVERWRITE_IF 5

/* CreateOptions field. */
#define FILE_DIRECTORY_FILE       0x0001
#define FILE_WRITE_THROUGH        0x0002
#define FILE_SEQUENTIAL_ONLY      0x0004
#define FILE_NON_DIRECTORY_FILE   0x0040
#define FILE_NO_EA_KNOWLEDGE      0x0200
#define FILE_EIGHT_DOT_THREE_ONLY 0x0400
#define FILE_RANDOM_ACCESS        0x0800
#define FILE_DELETE_ON_CLOSE      0x1000

/* Responses when opening a file. */
#define FILE_WAS_OPENED 1
#define FILE_WAS_CREATED 2
#define FILE_WAS_OVERWRITTEN 3

/* File type flags */
#define FILE_TYPE_DISK  0
#define FILE_TYPE_BYTE_MODE_PIPE 1
#define FILE_TYPE_MESSAGE_MODE_PIPE 2
#define FILE_TYPE_PRINTER 3
#define FILE_TYPE_COMM_DEVICE 4
#define FILE_TYPE_UNKNOWN 0xFFFF

/* Flag for NT transact rename call. */
#define RENAME_REPLACE_IF_EXISTS 1

/* Filesystem Attributes. */
#define FILE_CASE_SENSITIVE_SEARCH 0x01
#define FILE_CASE_PRESERVED_NAMES 0x02
#define FILE_UNICODE_ON_DISK 0x04
/* According to cifs9f, this is 4, not 8 */
/* Acconding to testing, this actually sets the security attribute! */
#define FILE_PERSISTENT_ACLS 0x08
/* These entries added from cifs9f --tsb */
#define FILE_FILE_COMPRESSION 0x10
#define FILE_VOLUME_QUOTAS 0x20
/* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */
#define FILE_VOLUME_SPARSE_FILE 0x40
#define FILE_VOLUME_IS_COMPRESSED 0x8000

/* ChangeNotify flags. */
#define FILE_NOTIFY_CHANGE_FILE        0x001
#define FILE_NOTIFY_CHANGE_DIR_NAME    0x002
#define FILE_NOTIFY_CHANGE_ATTRIBUTES  0x004
#define FILE_NOTIFY_CHANGE_SIZE        0x008
#define FILE_NOTIFY_CHANGE_LAST_WRITE  0x010
#define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
#define FILE_NOTIFY_CHANGE_CREATION    0x040
#define FILE_NOTIFY_CHANGE_EA          0x080
#define FILE_NOTIFY_CHANGE_SECURITY    0x100
#define FILE_NOTIFY_CHANGE_FILE_NAME   0x200

/* where to find the base of the SMB packet proper */
#define smb_base(buf) (((char *)(buf))+4)

/* we don't allow server strings to be longer than 48 characters as
   otherwise NT will not honour the announce packets */
#define MAX_SERVER_STRING_LENGTH 48


#define SMB_SUCCESS 0  /* The request was successful. */

#ifdef WITH_DFS
void dfs_unlogin(void);
extern int dcelogin_atmost_once;
#endif

#ifdef NOSTRDUP
char *strdup(char *s);
#endif

#ifndef SIGNAL_CAST
#define SIGNAL_CAST (RETSIGTYPE (*)(int))
#endif

#ifndef SELECT_CAST
#define SELECT_CAST
#endif

/* these are used in NetServerEnum to choose what to receive */
#define SV_TYPE_WORKSTATION         0x00000001
#define SV_TYPE_SERVER              0x00000002
#define SV_TYPE_SQLSERVER           0x00000004
#define SV_TYPE_DOMAIN_CTRL         0x00000008
#define SV_TYPE_DOMAIN_BAKCTRL      0x00000010
#define SV_TYPE_TIME_SOURCE         0x00000020
#define SV_TYPE_AFP                 0x00000040
#define SV_TYPE_NOVELL              0x00000080
#define SV_TYPE_DOMAIN_MEMBER       0x00000100
#define SV_TYPE_PRINTQ_SERVER       0x00000200
#define SV_TYPE_DIALIN_SERVER       0x00000400
#define SV_TYPE_SERVER_UNIX         0x00000800
#define SV_TYPE_NT                  0x00001000
#define SV_TYPE_WFW                 0x00002000
#define SV_TYPE_SERVER_MFPN         0x00004000
#define SV_TYPE_SERVER_NT           0x00008000
#define SV_TYPE_POTENTIAL_BROWSER   0x00010000
#define SV_TYPE_BACKUP_BROWSER      0x00020000
#define SV_TYPE_MASTER_BROWSER      0x00040000
#define SV_TYPE_DOMAIN_MASTER       0x00080000
#define SV_TYPE_SERVER_OSF          0x00100000
#define SV_TYPE_SERVER_VMS          0x00200000
#define SV_TYPE_WIN95_PLUS          0x00400000
#define SV_TYPE_DFS_SERVER	    0x00800000
#define SV_TYPE_ALTERNATE_XPORT     0x20000000  
#define SV_TYPE_LOCAL_LIST_ONLY     0x40000000  
#define SV_TYPE_DOMAIN_ENUM         0x80000000
#define SV_TYPE_ALL                 0xFFFFFFFF  

/* This was set by JHT in liaison with Jeremy Allison early 1997
 * History:
 * Version 4.0 - never made public
 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
 *              - Reappeared in 1.9.16p11 with fixed smbd services
 * Version 4.20 - To indicate that nmbd and browsing now works better
 * Version 4.50 - Set at release of samba-2.2.0 by JHT
 *
 *  Note: In the presence of NT4.X do not set above 4.9
 *        Setting this above 4.9 can have undesired side-effects.
 *        This may change again in Samba-3.0 after further testing. JHT
 */
 
#define DEFAULT_MAJOR_VERSION 0x04
#define DEFAULT_MINOR_VERSION 0x05

/* Browser Election Values */
#define BROWSER_ELECTION_VERSION	0x010f
#define BROWSER_CONSTANT	0xaa55

/* Sercurity mode bits. */
#define NEGOTIATE_SECURITY_USER_LEVEL		0x01
#define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE	0x02
#define NEGOTIATE_SECURITY_SIGNATURES_ENABLED	0x04
#define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED	0x08

/* NT Flags2 bits - cifs6.txt section 3.1.2 */
   
#define FLAGS2_LONG_PATH_COMPONENTS    0x0001
#define FLAGS2_EXTENDED_ATTRIBUTES     0x0002
#define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
#define FLAGS2_IS_LONG_NAME            0x0040
#define FLAGS2_EXTENDED_SECURITY       0x0800 
#define FLAGS2_DFS_PATHNAMES           0x1000
#define FLAGS2_READ_PERMIT_NO_EXECUTE  0x2000
#define FLAGS2_32_BIT_ERROR_CODES      0x4000 
#define FLAGS2_UNICODE_STRINGS         0x8000

#define FLAGS2_WIN2K_SIGNATURE         0xC852 /* Hack alert ! For now... JRA. */

/* Capabilities.  see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */

#define CAP_RAW_MODE         0x0001
#define CAP_MPX_MODE         0x0002
#define CAP_UNICODE          0x0004
#define CAP_LARGE_FILES      0x0008
#define CAP_NT_SMBS          0x0010
#define CAP_RPC_REMOTE_APIS  0x0020
#define CAP_STATUS32         0x0040
#define CAP_LEVEL_II_OPLOCKS 0x0080
#define CAP_LOCK_AND_READ    0x0100
#define CAP_NT_FIND          0x0200
#define CAP_DFS              0x1000
#define CAP_W2K_SMBS         0x2000
#define CAP_LARGE_READX      0x4000
#define CAP_LARGE_WRITEX     0x8000
#define CAP_UNIX             0x800000 /* Capabilities for UNIX extensions. Created by HP. */
#define CAP_EXTENDED_SECURITY 0x80000000

/* protocol types. It assumes that higher protocols include lower protocols
   as subsets */
enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};

/* security levels */
enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};

/* server roles */
enum server_types
{
	ROLE_STANDALONE,
	ROLE_DOMAIN_MEMBER,
	ROLE_DOMAIN_BDC,
	ROLE_DOMAIN_PDC
};

/* printing types */
enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
		     PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
		     PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2
#ifdef DEVELOPER
,PRINT_TEST,PRINT_VLP
#endif /* DEVELOPER */
};

/* LDAP schema types */
enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};

/* LDAP SSL options */
enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};

/* Remote architectures we know about. */
enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT, RA_WIN2K, RA_SAMBA};

/* case handling */
enum case_handling {CASE_LOWER,CASE_UPPER};

/*
 * Global value meaing that the smb_uid field should be
 * ingored (in share level security and protocol level == CORE)
 */

#define UID_FIELD_INVALID 0
#define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */

/* 
 * Size of buffer to use when moving files across filesystems. 
 */
#define COPYBUF_SIZE (8*1024)

/* 
 * Values used to override error codes. 
 */
extern int unix_ERR_class;
extern int unix_ERR_code;

/*
 * Used in chaining code.
 */
extern int chain_size;

/*
 * Map the Core and Extended Oplock requesst bits down
 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
 */

/*
 * Core protocol.
 */
#define CORE_OPLOCK_REQUEST(inbuf) \
    ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)

/*
 * Extended protocol.
 */
#define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)

/* Lock types. */
#define LOCKING_ANDX_SHARED_LOCK 0x1
#define LOCKING_ANDX_OPLOCK_RELEASE 0x2
#define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
#define LOCKING_ANDX_CANCEL_LOCK 0x8
#define LOCKING_ANDX_LARGE_FILES 0x10

/* Oplock levels */
#define OPLOCKLEVEL_NONE 0
#define OPLOCKLEVEL_II 1

/*
 * Bits we test with.
 */

#define NO_OPLOCK 0
#define EXCLUSIVE_OPLOCK 1
#define BATCH_OPLOCK 2
#define LEVEL_II_OPLOCK 4

#define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK))
#define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK)
#define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK)

#define CORE_OPLOCK_GRANTED (1<<5)
#define EXTENDED_OPLOCK_GRANTED (1<<15)

/*
 * Return values for oplock types.
 */

#define NO_OPLOCK_RETURN 0
#define EXCLUSIVE_OPLOCK_RETURN 1
#define BATCH_OPLOCK_RETURN 2
#define LEVEL_II_OPLOCK_RETURN 3

/*
 * Loopback command offsets.
 */

#define OPBRK_CMD_LEN_OFFSET 0
#define OPBRK_CMD_PORT_OFFSET 4
#define OPBRK_CMD_HEADER_LEN 6

#define OPBRK_MESSAGE_CMD_OFFSET 0

/*
 * Oplock break command code to send over the udp socket.
 * The same message is sent for both exlusive and level II breaks. 
 * 
 * The form of this is :
 *
 *  0     2       2+pid   2+pid+dev 2+pid+dev+ino
 *  +----+--------+-------+--------+---------+
 *  | cmd| pid    | dev   |  inode | fileid  |
 *  +----+--------+-------+--------+---------+
 */

#define OPLOCK_BREAK_CMD 0x1
#define OPLOCK_BREAK_PID_OFFSET 2
#define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t))
#define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
#define OPLOCK_BREAK_FILEID_OFFSET (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
#define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))

#define KERNEL_OPLOCK_BREAK_CMD 0x2
#define LEVEL_II_OPLOCK_BREAK_CMD 0x3

/*
 * Capabilities abstracted for different systems.
 */

#define KERNEL_OPLOCK_CAPABILITY 0x1

/*
 * Oplock break command code sent via the kernel interface (if it exists).
 *
 * Form of this is :
 *
 *  0     2       2+devsize 2+devsize+inodesize
 *  +----+--------+--------+----------+
 *  | cmd| dev    |  inode |  fileid  |
 *  +----+--------+--------+----------+
 */
#define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2
#define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
#define KERNEL_OPLOCK_BREAK_FILEID_OFFSET (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
#define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))


/* if a kernel does support oplocks then a structure of the following
   typee is used to describe how to interact with the kernel */
struct kernel_oplocks {
	BOOL (*receive_message)(fd_set *fds, char *buffer, int buffer_len);
	BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
	void (*release_oplock)(files_struct *fsp);
	BOOL (*parse_message)(char *msg_start, int msg_len, SMB_INO_T *inode, SMB_DEV_T *dev, unsigned long *file_id);
	BOOL (*msg_waiting)(fd_set *fds);
	int notification_fd;
};


#define CMD_REPLY 0x8000

/* this structure defines the functions for doing change notify in
   various implementations */
struct cnotify_fns {
	void * (*register_notify)(connection_struct *conn, char *path, uint32 flags);
	BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t);
	void (*remove_notify)(void *data);
	int select_time;
};



#include "smb_macros.h"

/* A netbios name structure. */
struct nmb_name {
  char         name[17];
  char         scope[64];
  unsigned int name_type;
};


/* A netbios node status array element. */
struct node_status {
	char name[16];
	unsigned char type;
	unsigned char flags;
};

struct pwd_info
{
	BOOL null_pwd;
	BOOL cleartext;
	BOOL crypted;

	fstring password;

	uchar smb_lm_pwd[16];
	uchar smb_nt_pwd[16];

	uchar smb_lm_owf[24];
	uchar smb_nt_owf[128];
	size_t nt_owf_len;

	uchar lm_cli_chal[8];
	uchar nt_cli_chal[128];
	size_t nt_cli_chal_len;

	uchar sess_key[16];
};

#include "rpc_creds.h"
#include "rpc_misc.h"
#include "rpc_secdes.h"
#include "nt_printing.h"

typedef struct user_struct
{
	struct user_struct *next, *prev;
	uint16 vuid; /* Tag for this entry. */
	uid_t uid; /* uid of a validated user */
	gid_t gid; /* gid of a validated user */

	userdom_struct user;
	char *homedir;
	char *unix_homedir;
	char *logon_script;
	
	BOOL guest;

	/* following groups stuff added by ih */
	/* This groups info is needed for when we become_user() for this uid */
	int n_groups;
	gid_t *groups;

	NT_USER_TOKEN *nt_user_token;

	uint8 session_key[16];

	int session_id; /* used by utmp and pam session code */
	
	int homes_snum;

} user_struct;


struct unix_error_map {
	int unix_error;
	int dos_class;
	int dos_code;
	NTSTATUS nt_error;
};

#include "ntdomain.h"

#include "client.h"

/*
 * Size of new password account encoding string.  This is enough space to
 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
 * Do not change unless you are adding new ACB bits!
 */

#define NEW_PW_FORMAT_SPACE_PADDED_LEN 14

/*
   Do you want session setups at user level security with a invalid
   password to be rejected or allowed in as guest? WinNT rejects them
   but it can be a pain as it means "net view" needs to use a password

   You have 3 choices in the setting of map_to_guest:

   "NEVER_MAP_TO_GUEST" means session setups with an invalid password
   are rejected. This is the default.

   "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
   are rejected, unless the username does not exist, in which case it
   is treated as a guest login

   "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
   are treated as a guest login

   Note that map_to_guest only has an effect in user or server
   level security.
*/

#define NEVER_MAP_TO_GUEST 0
#define MAP_TO_GUEST_ON_BAD_USER 1
#define MAP_TO_GUEST_ON_BAD_PASSWORD 2

#define SAFE_NETBIOS_CHARS ". -_"

#include "nsswitch/winbindd_nss.h"

/* generic iconv conversion structure */
typedef struct {
	size_t (*direct)(void *cd, char **inbuf, size_t *inbytesleft,
			 char **outbuf, size_t *outbytesleft);
	size_t (*pull)(void *cd, char **inbuf, size_t *inbytesleft,
		       char **outbuf, size_t *outbytesleft);
	size_t (*push)(void *cd, char **inbuf, size_t *inbytesleft,
		       char **outbuf, size_t *outbytesleft);
	void *cd_direct, *cd_pull, *cd_push;
	char *from_name, *to_name;
} *smb_iconv_t;

/* The maximum length of a trust account password.
   Used when we randomly create it, 15 char passwords
   exceed NT4's max password length */

#define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14

#endif /* _SMB_H */