path: root/source3/smbd/oplock.c

/* 
   Unix SMB/CIFS implementation.
   oplock processing
   Copyright (C) Andrew Tridgell 1992-1998
   Copyright (C) Jeremy Allison 1998 - 2001
   
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include "includes.h"

/* Oplock ipc UDP socket. */
static int oplock_sock = -1;
uint16 global_oplock_port = 0;

/* Current number of oplocks we have outstanding. */
static int32 exclusive_oplocks_open = 0;
static int32 level_II_oplocks_open = 0;
BOOL global_client_failed_oplock_break = False;
BOOL global_oplock_break = False;

extern struct timeval smb_last_time;
extern uint32 global_client_caps;
extern struct current_user current_user;
extern int smb_read_error;

static struct kernel_oplocks *koplocks;

static BOOL oplock_break(SMB_DEV_T dev, SMB_INO_T inode, unsigned long file_id, BOOL local);

/****************************************************************************
 Get the number of current exclusive oplocks.
****************************************************************************/

int32 get_number_of_exclusive_open_oplocks(void)
{
  return exclusive_oplocks_open;
}

/****************************************************************************
 Return True if an oplock message is pending.
****************************************************************************/

BOOL oplock_message_waiting(fd_set *fds)
{
	if (koplocks && koplocks->msg_waiting(fds))
		return True;

	if (FD_ISSET(oplock_sock, fds))
		return True;

	return False;
}

/****************************************************************************
 Read an oplock break message from either the oplock UDP fd or the
 kernel (if kernel oplocks are supported).

 If timeout is zero then *fds contains the file descriptors that
 are ready to be read and acted upon. If timeout is non-zero then
 *fds contains the file descriptors to be selected on for read.
 The timeout is in milliseconds

****************************************************************************/

BOOL receive_local_message( char *buffer, int buffer_len, int timeout)
{
	struct sockaddr_in from;
	socklen_t fromlen = sizeof(from);
	int32 msg_len = 0;
	fd_set fds;
	int selrtn = -1;

	FD_ZERO(&fds);
	smb_read_error = 0;

	/*
	 * We need to check for kernel oplocks before going into the select
	 * here, as the EINTR generated by the linux kernel oplock may have
	 * already been eaten. JRA.
	 */

	if (koplocks && koplocks->msg_waiting(&fds)) {
		return koplocks->receive_message(&fds, buffer, buffer_len);
	}

	while (timeout > 0 && selrtn == -1) {
		struct timeval to;
		int maxfd = oplock_sock;
		time_t starttime = time(NULL);

		FD_ZERO(&fds);
		maxfd = setup_oplock_select_set(&fds);

		to.tv_sec = timeout / 1000;
		to.tv_usec = (timeout % 1000) * 1000;

		DEBUG(5,("receive_local_message: doing select with timeout of %d ms\n", timeout));

		selrtn = sys_select(maxfd+1,&fds,NULL,NULL,&to);

		if (selrtn == -1 && errno == EINTR) {

			/* could be a kernel oplock interrupt */
			if (koplocks && koplocks->msg_waiting(&fds)) {
				return koplocks->receive_message(&fds, buffer, buffer_len);
			}

			/*
			 * Linux 2.0.x seems to have a bug in that
			 * it can return -1, EINTR with a timeout of zero.
			 * Make sure we bail out here with a read timeout
			 * if we got EINTR on a timeout of 1 or less.
			 */

			if (timeout <= 1) {
				smb_read_error = READ_TIMEOUT;
				return False;
			}

			/* Not a kernel interrupt - could be a SIGUSR1 message. We must restart. */
			/* We need to decrement the timeout here. */
			timeout -= ((time(NULL) - starttime)*1000);
			if (timeout < 0)
				timeout = 1;

			DEBUG(5,("receive_local_message: EINTR : new timeout %d ms\n", timeout));
			continue;
		}

		/* Check if error */
		if(selrtn == -1) {
			/* something is wrong. Maybe the socket is dead? */
			smb_read_error = READ_ERROR;
			return False;
		}

		/* Did we timeout ? */
		if (selrtn == 0) {
			smb_read_error = READ_TIMEOUT;
			return False;
		}
	}

	if (koplocks && koplocks->msg_waiting(&fds)) {
		return koplocks->receive_message(&fds, buffer, buffer_len);
	}

	if (!FD_ISSET(oplock_sock, &fds))
		return False;

	/*
	 * From here down we deal with the smbd <--> smbd
	 * oplock break protocol only.
	 */

	/*
	 * Read a loopback udp message.
	 */
	msg_len = sys_recvfrom(oplock_sock, &buffer[OPBRK_CMD_HEADER_LEN],
						buffer_len - OPBRK_CMD_HEADER_LEN, 0, (struct sockaddr *)&from, &fromlen);

	if(msg_len < 0) {
		DEBUG(0,("receive_local_message. Error in recvfrom. (%s).\n",strerror(errno)));
		return False;
	}

	/* Validate message length. */
	if(msg_len > (buffer_len - OPBRK_CMD_HEADER_LEN)) {
		DEBUG(0,("receive_local_message: invalid msg_len (%d) max can be %d\n", msg_len,
			buffer_len  - OPBRK_CMD_HEADER_LEN));
		return False;
	}

	/* Validate message from address (must be localhost). */
	if(from.sin_addr.s_addr != htonl(INADDR_LOOPBACK)) {
		DEBUG(0,("receive_local_message: invalid 'from' address \
(was %lx should be 127.0.0.1)\n", (long)from.sin_addr.s_addr));
		return False;
	}

	/* Setup the message header */
	SIVAL(buffer,OPBRK_CMD_LEN_OFFSET,msg_len);
	SSVAL(buffer,OPBRK_CMD_PORT_OFFSET,ntohs(from.sin_port));

	return True;
}

/****************************************************************************
 Attempt to set an oplock on a file. Always succeeds if kernel oplocks are
 disabled (just sets flags). Returns True if oplock set.
****************************************************************************/

BOOL set_file_oplock(files_struct *fsp, int oplock_type)
{
	if (koplocks && !koplocks->set_oplock(fsp, oplock_type))
		return False;

	fsp->oplock_type = oplock_type;
	fsp->sent_oplock_break = NO_BREAK_SENT;
	if (oplock_type == LEVEL_II_OPLOCK)
		level_II_oplocks_open++;
	else
		exclusive_oplocks_open++;

	DEBUG(5,("set_file_oplock: granted oplock on file %s, dev = %x, inode = %.0f, file_id = %lu, \
tv_sec = %x, tv_usec = %x\n",
		 fsp->fsp_name, (unsigned int)fsp->dev, (double)fsp->inode, fsp->file_id,
		 (int)fsp->open_time.tv_sec, (int)fsp->open_time.tv_usec ));

	return True;
}

/****************************************************************************
 Attempt to release an oplock on a file. Decrements oplock count.
****************************************************************************/

void release_file_oplock(files_struct *fsp)
{
	if ((fsp->oplock_type != NO_OPLOCK) && koplocks)
		koplocks->release_oplock(fsp);

	if (fsp->oplock_type == LEVEL_II_OPLOCK)
		level_II_oplocks_open--;
	else if (fsp->oplock_type)
		exclusive_oplocks_open--;
	
	fsp->oplock_type = NO_OPLOCK;
	fsp->sent_oplock_break = NO_BREAK_SENT;
	
	flush_write_cache(fsp, OPLOCK_RELEASE_FLUSH);
}

/****************************************************************************
 Attempt to downgrade an oplock on a file. Doesn't decrement oplock count.
****************************************************************************/

static void downgrade_file_oplock(files_struct *fsp)
{
	if (koplocks)
		koplocks->release_oplock(fsp);
	fsp->oplock_type = LEVEL_II_OPLOCK;
	exclusive_oplocks_open--;
	level_II_oplocks_open++;
	fsp->sent_oplock_break = NO_BREAK_SENT;
}

/****************************************************************************
 Remove a file oplock. Copes with level II and exclusive.
 Locks then unlocks the share mode lock. Client can decide to go directly
 to none even if a "break-to-level II" was sent.
****************************************************************************/

BOOL remove_oplock(files_struct *fsp, BOOL break_to_none)
{
	SMB_DEV_T dev = fsp->dev;
	SMB_INO_T inode = fsp->inode;
	BOOL ret = True;

	/* Remove the oplock flag from the sharemode. */
	if (lock_share_entry_fsp(fsp) == False) {
		DEBUG(0,("remove_oplock: failed to lock share entry for file %s\n",
			 fsp->fsp_name ));
		return False;
	}

	if (fsp->sent_oplock_break == EXCLUSIVE_BREAK_SENT || break_to_none) {
		/*
		 * Deal with a reply when a break-to-none was sent.
		 */

		if(remove_share_oplock(fsp)==False) {
			DEBUG(0,("remove_oplock: failed to remove share oplock for file %s fnum %d, \
dev = %x, inode = %.0f\n", fsp->fsp_name, fsp->fnum, (unsigned int)dev, (double)inode));
			ret = False;
		}

		release_file_oplock(fsp);
	} else {
		/*
		 * Deal with a reply when a break-to-level II was sent.
		 */
		if(downgrade_share_oplock(fsp)==False) {
			DEBUG(0,("remove_oplock: failed to downgrade share oplock for file %s fnum %d, \
dev = %x, inode = %.0f\n", fsp->fsp_name, fsp->fnum, (unsigned int)dev, (double)inode));
			ret = False;
		}
		
		downgrade_file_oplock(fsp);
	}

	unlock_share_entry_fsp(fsp);
	return ret;
}

/****************************************************************************
 Setup the listening set of file descriptors for an oplock break
 message either from the UDP socket or from the kernel. Returns the maximum
 fd used.
****************************************************************************/

int setup_oplock_select_set( fd_set *fds)
{
	int maxfd = oplock_sock;

	if(oplock_sock == -1)
		return 0;

	FD_SET(oplock_sock,fds);

	if (koplocks && koplocks->notification_fd != -1) {
		FD_SET(koplocks->notification_fd, fds);
		maxfd = MAX(maxfd, koplocks->notification_fd);
	}

	return maxfd;
}

/****************************************************************************
 Process an oplock break message - whether it came from the UDP socket
 or from the kernel.
****************************************************************************/

BOOL process_local_message(char *buffer, int buf_size)
{
	int32 msg_len;
	uint16 from_port;
	char *msg_start;
	pid_t remotepid;
	SMB_DEV_T dev;
	SMB_INO_T inode;
	unsigned long file_id;
	uint16 break_cmd_type;
	struct sockaddr_in toaddr;

	msg_len = IVAL(buffer,OPBRK_CMD_LEN_OFFSET);
	from_port = SVAL(buffer,OPBRK_CMD_PORT_OFFSET);

	msg_start = &buffer[OPBRK_CMD_HEADER_LEN];

	DEBUG(5,("process_local_message: Got a message of length %d from port (%d)\n", 
		msg_len, from_port));

	/* 
	 * Pull the info out of the requesting packet.
	 */

	break_cmd_type = SVAL(msg_start,OPBRK_MESSAGE_CMD_OFFSET);

	switch(break_cmd_type) {
		case KERNEL_OPLOCK_BREAK_CMD:
			if (!koplocks) {
				DEBUG(0,("unexpected kernel oplock break!\n"));
				break;
			} 
			if (!koplocks->parse_message(msg_start, msg_len, &inode, &dev, &file_id)) {
				DEBUG(0,("kernel oplock break parse failure!\n"));
				return False;
			}
			break;

		case OPLOCK_BREAK_CMD:
		case LEVEL_II_OPLOCK_BREAK_CMD:
		case ASYNC_LEVEL_II_OPLOCK_BREAK_CMD:

			/* Ensure that the msg length is correct. */
			if(msg_len != OPLOCK_BREAK_MSG_LEN) {
				DEBUG(0,("process_local_message: incorrect length for OPLOCK_BREAK_CMD (was %d, should be %d).\n",
					(int)msg_len, (int)OPLOCK_BREAK_MSG_LEN));
				return False;
			}

			memcpy((char *)&remotepid, msg_start+OPLOCK_BREAK_PID_OFFSET,sizeof(remotepid));
			memcpy((char *)&inode, msg_start+OPLOCK_BREAK_INODE_OFFSET,sizeof(inode));
			memcpy((char *)&dev, msg_start+OPLOCK_BREAK_DEV_OFFSET,sizeof(dev));
			memcpy((char *)&file_id, msg_start+OPLOCK_BREAK_FILEID_OFFSET,sizeof(file_id));

			DEBUG(5,("process_local_message: (%s) oplock break request from \
pid %d, port %d, dev = %x, inode = %.0f, file_id = %lu\n",
				(break_cmd_type == OPLOCK_BREAK_CMD) ? "exclusive" : "level II",
				(int)remotepid, from_port, (unsigned int)dev, (double)inode, file_id));
			break;

		case RETRY_DEFERRED_OPEN_CMD:

			/* Request to retry and open that would return SHARING_VIOLATION. */
			if (msg_len != DEFERRED_OPEN_MSG_LEN) {
				DEBUG(0,("process_local_message: incorrect length for RETRY_DEFERRED_OPEN_CMD (was %d, should be %d).\n",
					(int)msg_len, (int)DEFERRED_OPEN_MSG_LEN));
				return False;
			}
			{
				uint16 mid;

				memcpy((char *)&remotepid, msg_start+DEFERRED_OPEN_PID_OFFSET,sizeof(remotepid));
				memcpy((char *)&inode, msg_start+DEFERRED_OPEN_INODE_OFFSET,sizeof(inode));
				memcpy((char *)&dev, msg_start+DEFERRED_OPEN_DEV_OFFSET,sizeof(dev));
				memcpy((char *)&mid, msg_start+DEFERRED_OPEN_MID_OFFSET,sizeof(mid));

				DEBUG(5,("process_local_message: RETRY_DEFERRED_OPEN from \
pid %d, port %d, dev = %x, inode = %.0f, mid = %u\n",
					(int)remotepid, from_port, (unsigned int)dev, (double)inode, (unsigned int)mid));

				schedule_sharing_violation_open_smb_message(mid);
			}
			return True;

		/* 
		 * Keep this as a debug case - eventually we can remove it.
		 */
		case 0x8001:
			DEBUG(0,("process_local_message: Received unsolicited break \
reply - dumping info.\n"));

			if(msg_len != OPLOCK_BREAK_MSG_LEN) {
				DEBUG(0,("process_local_message: ubr: incorrect length for reply \
(was %d, should be %d).\n", (int)msg_len, (int)OPLOCK_BREAK_MSG_LEN));
				return False;
			}

			memcpy((char *)&inode, msg_start+OPLOCK_BREAK_INODE_OFFSET,sizeof(inode));
			memcpy((char *)&remotepid, msg_start+OPLOCK_BREAK_PID_OFFSET,sizeof(remotepid));
			memcpy((char *)&dev, msg_start+OPLOCK_BREAK_DEV_OFFSET,sizeof(dev));
			memcpy((char *)&file_id, msg_start+OPLOCK_BREAK_FILEID_OFFSET,sizeof(file_id));

			DEBUG(0,("process_local_message: unsolicited oplock break reply from \
pid %d, port %d, dev = %x, inode = %.0f, file_id = %lu\n",
				(int)remotepid, from_port, (unsigned int)dev, (double)inode, file_id));

			return False;

		default:
			DEBUG(0,("process_local_message: unknown UDP message command code (%x) - ignoring.\n",
				(unsigned int)SVAL(msg_start,0)));
			return False;
	}

	/*
	 * Now actually process the break request.
	 */

	if ((exclusive_oplocks_open == 0) &&
	    (level_II_oplocks_open == 0)) {
		/*
		 * If we have no record of any currently open oplocks,
		 * it's not an error, as a close command may have
		 * just been issued on the file that was oplocked.
		 * Just log a message and return success in this case.
		 */
		DEBUG(3,("process_local_message: oplock break requested with "
			 "no outstanding oplocks. Returning success.\n"));
		return True;
	}

	if (!oplock_break(dev, inode, file_id, False)) {
		DEBUG(0,("process_local_message: oplock break failed.\n"));
		return False;
	}

	/* 
	 * Do the appropriate reply - none in the kernel or async level II
	 * case.
	 */

	if (!((break_cmd_type == OPLOCK_BREAK_CMD) ||
	      (break_cmd_type == LEVEL_II_OPLOCK_BREAK_CMD))) {
		return True;
	}

	/* Send the message back after OR'ing in the 'REPLY' bit. */
	SSVAL(msg_start,OPBRK_MESSAGE_CMD_OFFSET,break_cmd_type | CMD_REPLY);

	memset((char *)&toaddr,'\0',sizeof(toaddr));
	toaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
	toaddr.sin_port = htons(from_port);
	toaddr.sin_family = AF_INET;

	if(sys_sendto( oplock_sock, msg_start, OPLOCK_BREAK_MSG_LEN, 0,
		       (struct sockaddr *)&toaddr, sizeof(toaddr)) < 0) {
		DEBUG(0,("process_local_message: sendto process %d failed. "
			 "Errno was %s\n", (int)remotepid, strerror(errno)));
		return False;
	}

	DEBUG(5,("process_local_message: oplock break reply sent to pid %d, "
		 "port %d, for file dev = %x, inode = %.0f, file_id = %lu\n",
		 (int)remotepid, from_port, (unsigned int)dev,
		 (double)inode, file_id));

	return True;
}

/****************************************************************************
 Set up an oplock break message.
****************************************************************************/

static void prepare_break_message(char *outbuf, files_struct *fsp, BOOL level2)
{
	memset(outbuf,'\0',smb_size);
	set_message(outbuf,8,0,True);

	SCVAL(outbuf,smb_com,SMBlockingX);
	SSVAL(outbuf,smb_tid,fsp->conn->cnum);
	SSVAL(outbuf,smb_pid,0xFFFF);
	SSVAL(outbuf,smb_uid,0);
	SSVAL(outbuf,smb_mid,0xFFFF);
	SCVAL(outbuf,smb_vwv0,0xFF);
	SSVAL(outbuf,smb_vwv2,fsp->fnum);
	SCVAL(outbuf,smb_vwv3,LOCKING_ANDX_OPLOCK_RELEASE);
	SCVAL(outbuf,smb_vwv3+1,level2 ? OPLOCKLEVEL_II : OPLOCKLEVEL_NONE);
}

/****************************************************************************
 Function to do the waiting before sending a local break.
****************************************************************************/

static void wait_before_sending_break(BOOL local_request)
{
	if(local_request) {
		struct timeval cur_tv;
		long wait_left = (long)lp_oplock_break_wait_time();

		if (wait_left == 0)
			return;

		GetTimeOfDay(&cur_tv);

		wait_left -= ((cur_tv.tv_sec - smb_last_time.tv_sec)*1000) +
                ((cur_tv.tv_usec - smb_last_time.tv_usec)/1000);

		if(wait_left > 0) {
			wait_left = MIN(wait_left, 1000);
			sys_usleep(wait_left * 1000);
		}
	}
}

/****************************************************************************
 Ensure that we have a valid oplock.
****************************************************************************/

static files_struct *initial_break_processing(SMB_DEV_T dev, SMB_INO_T inode, unsigned long file_id)
{
	files_struct *fsp = NULL;

	if( DEBUGLVL( 3 ) ) {
		dbgtext( "initial_break_processing: called for dev = %x, inode = %.0f file_id = %lu\n",
			(unsigned int)dev, (double)inode, file_id);
		dbgtext( "Current oplocks_open (exclusive = %d, levelII = %d)\n",
			exclusive_oplocks_open, level_II_oplocks_open );
	}

	/*
	 * We need to search the file open table for the
	 * entry containing this dev and inode, and ensure
	 * we have an oplock on it.
	 */

	fsp = file_find_dif(dev, inode, file_id);

	if(fsp == NULL) {
		/* The file could have been closed in the meantime - return success. */
		if( DEBUGLVL( 3 ) ) {
			dbgtext( "initial_break_processing: cannot find open file with " );
			dbgtext( "dev = %x, inode = %.0f file_id = %lu", (unsigned int)dev,
				(double)inode, file_id);
			dbgtext( "allowing break to succeed.\n" );
		}
		return NULL;
	}

	/* Ensure we have an oplock on the file */

	/*
	 * There is a potential race condition in that an oplock could
	 * have been broken due to another udp request, and yet there are
	 * still oplock break messages being sent in the udp message
	 * queue for this file. So return true if we don't have an oplock,
	 * as we may have just freed it.
	 */

	if(fsp->oplock_type == NO_OPLOCK) {
		if( DEBUGLVL( 3 ) ) {
			dbgtext( "initial_break_processing: file %s ", fsp->fsp_name );
			dbgtext( "(dev = %x, inode = %.0f, file_id = %lu) has no oplock.\n",
				(unsigned int)dev, (double)inode, fsp->file_id );
			dbgtext( "Allowing break to succeed regardless.\n" );
		}
		return NULL;
	}

	return fsp;
}

/****************************************************************************
 Process a level II oplock break directly.
 We must call this function with the share mode entry locked.
****************************************************************************/

static BOOL oplock_break_level2(files_struct *fsp, BOOL local_request)
{
	char outbuf[128];
	SMB_DEV_T dev = fsp->dev;
	SMB_INO_T inode = fsp->inode;

	/*
	 * We can have a level II oplock even if the client is not
	 * level II oplock aware. In this case just remove the
	 * flags and don't send the break-to-none message to
	 * the client.
	 */

	if (global_client_caps & CAP_LEVEL_II_OPLOCKS) {
		BOOL sign_state;

		/*
		 * If we are sending an oplock break due to an SMB sent
		 * by our own client we ensure that we wait at leat
		 * lp_oplock_break_wait_time() milliseconds before sending
		 * the packet. Sending the packet sooner can break Win9x
		 * and has reported to cause problems on NT. JRA.
		 */

		wait_before_sending_break(local_request);

		/* Prepare the SMBlockingX message. */
		prepare_break_message( outbuf, fsp, False);

		/* Save the server smb signing state. */
		sign_state = srv_oplock_set_signing(False);

		show_msg(outbuf);
		if (!send_smb(smbd_server_fd(), outbuf))
			exit_server("oplock_break_level2: send_smb failed.");

		/* Restore the sign state to what it was. */
		srv_oplock_set_signing(sign_state);
	}

	/*
	 * Now we must update the shared memory structure to tell
	 * everyone else we no longer have a level II oplock on 
	 * this open file. We must call this function with the share mode
	 * entry locked so we can change the entry directly.
	 */

	if(remove_share_oplock(fsp)==False) {
		DEBUG(0,("oplock_break_level2: unable to remove level II oplock for file %s\n", fsp->fsp_name ));
	}

	release_file_oplock(fsp);

	if(level_II_oplocks_open < 0) {
		DEBUG(0,("oplock_break_level2: level_II_oplocks_open < 0 (%d). PANIC ERROR\n",
			level_II_oplocks_open));
		abort();
	}

	if( DEBUGLVL( 3 ) ) {
		dbgtext( "oplock_break_level2: returning success for " );
		dbgtext( "dev = %x, inode = %.0f, file_id = %lu\n", (unsigned int)dev, (double)inode, fsp->file_id );
		dbgtext( "Current level II oplocks_open = %d\n", level_II_oplocks_open );
	}

	return True;
}

/****************************************************************************
 Process an oplock break directly.
 This is always called with the share mode lock *NOT* held.
****************************************************************************/

static BOOL oplock_break(SMB_DEV_T dev, SMB_INO_T inode, unsigned long file_id, BOOL local_request)
{
	char *inbuf = NULL;
	char *saved_inbuf = NULL;
	char *outbuf = NULL;
	char *saved_outbuf = NULL;
	files_struct *fsp = NULL;
	time_t start_time;
	BOOL shutdown_server = False;
	BOOL oplock_timeout = False;
	BOOL sign_state;
	connection_struct *saved_user_conn;
	connection_struct *saved_fsp_conn;
	int saved_vuid;
	pstring saved_dir; 
	int timeout = (OPLOCK_BREAK_TIMEOUT * 1000);
	pstring file_name;
	BOOL using_levelII;

	if((fsp = initial_break_processing(dev, inode, file_id)) == NULL)
		return True;

	/*
	 * Deal with a level II oplock going break to none separately.
	 */

	if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type)) {
		BOOL ret;
		/* We must always call oplock_break_level2() with
		   the share mode entry locked. */
		if (lock_share_entry_fsp(fsp) == False) {
			DEBUG(0,("oplock_break: unable to lock share entry for file %s\n", fsp->fsp_name ));
			return False;
		}
		ret = oplock_break_level2(fsp, local_request);
		unlock_share_entry_fsp(fsp);
		return ret;
	}

	/* Mark the oplock break as sent - we don't want to send twice! */
	if (fsp->sent_oplock_break) {
		if( DEBUGLVL( 0 ) ) {
			dbgtext( "oplock_break: ERROR: oplock_break already sent for " );
			dbgtext( "file %s ", fsp->fsp_name);
			dbgtext( "(dev = %x, inode = %.0f, file_id = %lu)\n", (unsigned int)dev, (double)inode, fsp->file_id );
		}

		/*
		 * We have to fail the open here as we cannot send another oplock break on
		 * this file whilst we are awaiting a response from the client - neither
		 * can we allow another open to succeed while we are waiting for the client.
		 */
		return False;
	}

	if(global_oplock_break) {
		DEBUG(0,("ABORT : ABORT : recursion in oplock_break !!!!!\n"));
		abort();
	}

	/*
	 * Now comes the horrid part. We must send an oplock break to the client,
	 * and then process incoming messages until we get a close or oplock release.
	 * At this point we know we need a new inbuf/outbuf buffer pair.
	 * We cannot use these staticaly as we may recurse into here due to
	 * messages crossing on the wire.
	 */

	if((inbuf = NewInBuffer(&saved_inbuf))==NULL) {
		DEBUG(0,("oplock_break: malloc fail for input buffer.\n"));
		return False;
	}

	if((outbuf = NewOutBuffer(&saved_outbuf))==NULL) {
		DEBUG(0,("oplock_break: malloc fail for output buffer.\n"));
		set_InBuffer(saved_inbuf);
		free_InBuffer(inbuf);
		return False;
	}

	/*
	 * If we are sending an oplock break due to an SMB sent
	 * by our own client we ensure that we wait at leat
	 * lp_oplock_break_wait_time() milliseconds before sending
	 * the packet. Sending the packet sooner can break Win9x
	 * and has reported to cause problems on NT. JRA.
	 */

	wait_before_sending_break(local_request);

	/* Prepare the SMBlockingX message. */

	if ((global_client_caps & CAP_LEVEL_II_OPLOCKS) && 
			!koplocks && /* NOTE: we force levelII off for kernel oplocks - this will change when it is supported */
			lp_level2_oplocks(SNUM(fsp->conn))) {
		using_levelII = True;
	} else {
		using_levelII = False;
	}

	prepare_break_message( outbuf, fsp, using_levelII);
	/* Remember if we just sent a break to level II on this file. */
	fsp->sent_oplock_break = using_levelII? LEVEL_II_BREAK_SENT:EXCLUSIVE_BREAK_SENT;

	/* Save the server smb signing state. */
	sign_state = srv_oplock_set_signing(False);

	show_msg(outbuf);
	if (!send_smb(smbd_server_fd(), outbuf)) {
		srv_oplock_set_signing(sign_state);
		exit_server("oplock_break: send_smb failed.");
	}

	/* Restore the sign state to what it was. */
	srv_oplock_set_signing(sign_state);

	/* We need this in case a readraw crosses on the wire. */
	global_oplock_break = True;
 
	/* Process incoming messages. */

	/*
	 * JRA - If we don't get a break from the client in OPLOCK_BREAK_TIMEOUT
	 * seconds we should just die....
	 */

	start_time = time(NULL);

	/*
	 * Save the information we need to re-become the
	 * user, then unbecome the user whilst we're doing this.
	 */
	saved_user_conn = current_user.conn;
	saved_vuid = current_user.vuid;
	saved_fsp_conn = fsp->conn;
	/*
	 * Initialize saved_dir to something sensible: vfs_GetWd may not work well
	 * for root: the directory may be NFS-mounted and exported with root_squash
	 * (so has no root access).
	 */
	pstrcpy(saved_dir,saved_fsp_conn->connectpath);
	vfs_GetWd(saved_fsp_conn,saved_dir);
	/* Save the chain fnum. */
	file_chain_save();

	pstrcpy(file_name, fsp->fsp_name);

	change_to_root_user();

	/*
	 * From Charles Hoch <hoch@exemplary.com>. If the break processing
	 * code closes the file (as it often does), then the fsp pointer here
	 * points to free()'d memory. We *must* revalidate fsp each time
	 * around the loop. With async I/O, write calls may steal the global InBuffer,
	 * so ensure we're using the correct one each time around the loop.
	 */

	while((fsp = initial_break_processing(dev, inode, file_id)) &&
			OPEN_FSP(fsp) && EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type)) {

		inbuf = get_InBuffer();
		outbuf = get_OutBuffer();

		if(receive_smb(smbd_server_fd(),inbuf, timeout) == False) {
			/*
			 * Die if we got an error.
			 */

			if (smb_read_error == READ_EOF) {
				DEBUG( 0, ( "oplock_break: end of file from client\n" ) );
				shutdown_server = True;
			} else if (smb_read_error == READ_ERROR) {
				DEBUG( 0, ("oplock_break: receive_smb error (%s)\n", strerror(errno)) );
				shutdown_server = True;
			} else if (smb_read_error == READ_BAD_SIG) {
				DEBUG( 0, ("oplock_break: bad signature from client\n" ));
				shutdown_server = True;
			} else if (smb_read_error == READ_TIMEOUT) {
				DEBUG( 0, ( "oplock_break: receive_smb timed out after %d seconds.\n", OPLOCK_BREAK_TIMEOUT ) );
				oplock_timeout = True;
			}

			DEBUGADD( 0, ( "oplock_break failed for file %s ", file_name ) );
			DEBUGADD( 0, ( "(dev = %x, inode = %.0f, file_id = %lu).\n",
				(unsigned int)dev, (double)inode, file_id));

			break;
		}

		/*
		 * There are certain SMB requests that we shouldn't allow
		 * to recurse. opens, renames and deletes are the obvious
		 * ones. This is handled in the switch_message() function.
		 * If global_oplock_break is set they will push the packet onto
		 * the pending smb queue and return -1 (no reply).
		 * JRA.
		 */

		process_smb(inbuf, outbuf);

		/*
		 * Die if we go over the time limit.
		 */

		if((time(NULL) - start_time) > OPLOCK_BREAK_TIMEOUT) {
			if( DEBUGLVL( 0 ) ) {
				dbgtext( "oplock_break: no break received from client " );
				dbgtext( "within %d seconds.\n", OPLOCK_BREAK_TIMEOUT );
				dbgtext( "oplock_break failed for file %s ", fsp->fsp_name );
				dbgtext( "(dev = %x, inode = %.0f, file_id = %lu).\n",	
					(unsigned int)dev, (double)inode, file_id );
			}
			oplock_timeout = True;
			break;
		}
	}

	/*
	 * Go back to being the user who requested the oplock
	 * break.
	 */
	if((saved_user_conn != NULL) && (saved_vuid != UID_FIELD_INVALID) && !change_to_user(saved_user_conn, saved_vuid)) {
		DEBUG( 0, ( "oplock_break: unable to re-become user!" ) );
		DEBUGADD( 0, ( "Shutting down server\n" ) );
		close(oplock_sock);
		exit_server("unable to re-become user");
	}

	/* Including the directory. */
	vfs_ChDir(saved_fsp_conn,saved_dir);

	/* Restore the chain fnum. */
	file_chain_restore();

	/* Restore the global In/Out buffers. */
	set_InBuffer(saved_inbuf);
	set_OutBuffer(saved_outbuf);

	/* Free the buffers we've been using to recurse. */
	free_InBuffer(inbuf);
	free_OutBuffer(outbuf);

	/* We need this in case a readraw crossed on the wire. */
	if(global_oplock_break)
		global_oplock_break = False;

	/*
	 * If the client timed out then clear the oplock (or go to level II)
	 * and continue. This seems to be what NT does and is better than dropping
	 * the connection.
	 */

	if(oplock_timeout && (fsp = initial_break_processing(dev, inode, file_id)) &&
			OPEN_FSP(fsp) && EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type)) {
		DEBUG(0,("oplock_break: client failure in oplock break in file %s\n", fsp->fsp_name));
		remove_oplock(fsp,True);
#if FASCIST_OPLOCK_BACKOFF
		global_client_failed_oplock_break = True; /* Never grant this client an oplock again. */
#endif
	}

	/*
	 * If the client had an error we must die.
	 */

	if(shutdown_server) {
		DEBUG( 0, ( "oplock_break: client failure in break - " ) );
		DEBUGADD( 0, ( "shutting down this smbd.\n" ) );
		close(oplock_sock);
		exit_server("oplock break failure");
	}

	/* Santity check - remove this later. JRA */
	if(exclusive_oplocks_open < 0) {
		DEBUG(0,("oplock_break: exclusive_oplocks_open < 0 (%d). PANIC ERROR\n", exclusive_oplocks_open));
		abort();
	}

	/* We know we have no saved errors here. */
	set_saved_error_triple(0, 0, NT_STATUS_OK);

	if( DEBUGLVL( 3 ) ) {
		dbgtext( "oplock_break: returning success for " );
		dbgtext( "dev = %x, inode = %.0f, file_id = %lu\n", (unsigned int)dev, (double)inode, file_id );
		dbgtext( "Current exclusive_oplocks_open = %d\n", exclusive_oplocks_open );
	}

	return True;
}

/****************************************************************************
 Send an oplock break message to another smbd process. If the oplock is held 
 by the local smbd then call the oplock break function directly.
 This function is called with no share locks held.
****************************************************************************/

BOOL request_oplock_break(share_mode_entry *share_entry)
{
	char op_break_msg[OPLOCK_BREAK_MSG_LEN];
	struct sockaddr_in addr_out;
	pid_t pid = sys_getpid();
	time_t start_time;
	int time_left;
	SMB_DEV_T dev = share_entry->dev;
	SMB_INO_T inode = share_entry->inode;
	unsigned long file_id = share_entry->share_file_id;
	uint16 break_cmd_type;

	if(pid == share_entry->pid) {
		/* We are breaking our own oplock, make sure it's us. */
		if(share_entry->op_port != global_oplock_port) {
			DEBUG(0,("request_oplock_break: corrupt share mode entry - pid = %d, port = %d \
should be %d\n", (int)pid, share_entry->op_port, global_oplock_port));
			return False;
		}

		DEBUG(5,("request_oplock_break: breaking our own oplock\n"));

#if 1 /* JRA PARANOIA TEST.... */
		{
			files_struct *fsp = file_find_dif(dev, inode, file_id);
			if (!fsp) {
				DEBUG(0,("request_oplock_break: PANIC : breaking our own oplock requested for \
dev = %x, inode = %.0f, file_id = %lu and no fsp found !\n",
            (unsigned int)dev, (double)inode, file_id ));
				smb_panic("request_oplock_break: no fsp found for our own oplock\n");
			}
		}
#endif /* END JRA PARANOIA TEST... */

		/* Call oplock break direct. */
		return oplock_break(dev, inode, file_id, True);
	}

	/* We need to send a OPLOCK_BREAK_CMD message to the port in the share mode entry. */

	if (LEVEL_II_OPLOCK_TYPE(share_entry->op_type)) {
		break_cmd_type = LEVEL_II_OPLOCK_BREAK_CMD;
	} else {
		break_cmd_type = OPLOCK_BREAK_CMD;
	}

	SSVAL(op_break_msg,OPBRK_MESSAGE_CMD_OFFSET,break_cmd_type);
	memcpy(op_break_msg+OPLOCK_BREAK_PID_OFFSET,(char *)&pid,sizeof(pid));
	memcpy(op_break_msg+OPLOCK_BREAK_DEV_OFFSET,(char *)&dev,sizeof(dev));
	memcpy(op_break_msg+OPLOCK_BREAK_INODE_OFFSET,(char *)&inode,sizeof(inode));
	memcpy(op_break_msg+OPLOCK_BREAK_FILEID_OFFSET,(char *)&file_id,sizeof(file_id));

	/* Set the address and port. */
	memset((char *)&addr_out,'\0',sizeof(addr_out));
	addr_out.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
	addr_out.sin_port = htons( share_entry->op_port );
	addr_out.sin_family = AF_INET;
   
	if( DEBUGLVL( 3 ) ) {
		dbgtext( "request_oplock_break: sending a synchronous oplock break message to " );
		dbgtext( "pid %d on port %d ", (int)share_entry->pid, share_entry->op_port );
		dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
            (unsigned int)dev, (double)inode, file_id );
	}

	if(sys_sendto(oplock_sock,op_break_msg,OPLOCK_BREAK_MSG_LEN,0,
			(struct sockaddr *)&addr_out,sizeof(addr_out)) < 0) {
		if( DEBUGLVL( 0 ) ) {
			dbgtext( "request_oplock_break: failed when sending a oplock " );
			dbgtext( "break message to pid %d ", (int)share_entry->pid );
			dbgtext( "on port %d ", share_entry->op_port );
			dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
				(unsigned int)dev, (double)inode, file_id );
			dbgtext( "Error was %s\n", strerror(errno) );
		}
		return False;
	}

	/*
	 * Now we must await the oplock broken message coming back
	 * from the target smbd process. Timeout if it fails to
	 * return in (OPLOCK_BREAK_TIMEOUT + OPLOCK_BREAK_TIMEOUT_FUDGEFACTOR) seconds.
	 * While we get messages that aren't ours, loop.
	 */

	start_time = time(NULL);
	time_left = OPLOCK_BREAK_TIMEOUT+OPLOCK_BREAK_TIMEOUT_FUDGEFACTOR;

	while(time_left >= 0) {
		char op_break_reply[OPBRK_CMD_HEADER_LEN+OPLOCK_BREAK_MSG_LEN];
		uint16 reply_from_port;
		char *reply_msg_start;

		if(receive_local_message(op_break_reply, sizeof(op_break_reply),
				time_left ? time_left * 1000 : 1) == False) {
			if(smb_read_error == READ_TIMEOUT) {
				if( DEBUGLVL( 0 ) ) {
					dbgtext( "request_oplock_break: no response received to oplock " );
					dbgtext( "break request to pid %d ", (int)share_entry->pid );
					dbgtext( "on port %d ", share_entry->op_port );
					dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
							(unsigned int)dev, (double)inode, file_id );
				}

				/*
				 * This is a hack to make handling of failing clients more robust.
				 * If a oplock break response message is not received in the timeout
				 * period we may assume that the smbd servicing that client holding
				 * the oplock has died and the client changes were lost anyway, so
				 * we should continue to try and open the file.
				 */
				break;
			} else {
				if( DEBUGLVL( 0 ) ) {
					dbgtext( "request_oplock_break: error in response received " );
					dbgtext( "to oplock break request to pid %d ", (int)share_entry->pid );
					dbgtext( "on port %d ", share_entry->op_port );
					dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
						(unsigned int)dev, (double)inode, file_id );
					dbgtext( "Error was (%s).\n", strerror(errno) );
				}
			}
			return False;
		}

		reply_from_port = SVAL(op_break_reply,OPBRK_CMD_PORT_OFFSET);
		reply_msg_start = &op_break_reply[OPBRK_CMD_HEADER_LEN];

		/*
		 * Test to see if this is the reply we are awaiting (ie. the one we sent with the CMD_REPLY flag OR'ed in).
		 */
		if((SVAL(reply_msg_start,OPBRK_MESSAGE_CMD_OFFSET) & CMD_REPLY) &&
			((SVAL(reply_msg_start,OPBRK_MESSAGE_CMD_OFFSET) & ~CMD_REPLY) == break_cmd_type) &&
			(reply_from_port == share_entry->op_port) && 
			(memcmp(&reply_msg_start[OPLOCK_BREAK_PID_OFFSET], &op_break_msg[OPLOCK_BREAK_PID_OFFSET],
				OPLOCK_BREAK_MSG_LEN - OPLOCK_BREAK_PID_OFFSET) == 0)) {

			/*
			 * This is the reply we've been waiting for.
			 */
			break;
		} else {
			/*
			 * This is another message - a break request.
			 * Note that both kernel oplock break requests
			 * and UDP inter-smbd oplock break requests will
			 * be processed here.
			 *
			 * Process it to prevent potential deadlock.
			 * Note that the code in switch_message() prevents
			 * us from recursing into here as any SMB requests
			 * we might process that would cause another oplock
			 * break request to be made will be queued.
			 * JRA.
			 */

			process_local_message(op_break_reply, sizeof(op_break_reply));
		}

		time_left -= (time(NULL) - start_time);
	}

	DEBUG(3,("request_oplock_break: broke oplock.\n"));

	return True;
}

/****************************************************************************
  Attempt to break an oplock on a file (if oplocked).
  Returns True if the file was closed as a result of
  the oplock break, False otherwise.
  Used as a last ditch attempt to free a space in the 
  file table when we have run out.
****************************************************************************/

BOOL attempt_close_oplocked_file(files_struct *fsp)
{
	DEBUG(5,("attempt_close_oplocked_file: checking file %s.\n", fsp->fsp_name));

	if (EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type) && !fsp->sent_oplock_break && (fsp->fh->fd != -1)) {
		/* Try and break the oplock. */
		if (oplock_break(fsp->dev, fsp->inode, fsp->file_id, True)) {
			if(file_find_fsp(fsp) == NULL) /* Did the oplock break close the file ? */
				return True;
		}
	}

	return False;
}

/****************************************************************************
 Send an asynchronous oplock break message to another smbd process.
****************************************************************************/

static BOOL request_remote_level2_async_oplock_break(share_mode_entry *share_entry)
{
	char op_break_msg[OPLOCK_BREAK_MSG_LEN];
	struct sockaddr_in addr_out;
	pid_t pid = sys_getpid();
	SMB_DEV_T dev = share_entry->dev;
	SMB_INO_T inode = share_entry->inode;
	unsigned long file_id = share_entry->share_file_id;

	/* We need to send a ASYNC_LEVEL_II_OPLOCK_BREAK_CMD message to the port in the share mode entry. */

	SSVAL(op_break_msg,OPBRK_MESSAGE_CMD_OFFSET,ASYNC_LEVEL_II_OPLOCK_BREAK_CMD);
	memcpy(op_break_msg+OPLOCK_BREAK_PID_OFFSET,(char *)&pid,sizeof(pid));
	memcpy(op_break_msg+OPLOCK_BREAK_DEV_OFFSET,(char *)&dev,sizeof(dev));
	memcpy(op_break_msg+OPLOCK_BREAK_INODE_OFFSET,(char *)&inode,sizeof(inode));
	memcpy(op_break_msg+OPLOCK_BREAK_FILEID_OFFSET,(char *)&file_id,sizeof(file_id));

	/* Set the address and port. */
	memset((char *)&addr_out,'\0',sizeof(addr_out));
	addr_out.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
	addr_out.sin_port = htons( share_entry->op_port );
	addr_out.sin_family = AF_INET;
   
	if( DEBUGLVL( 3 ) ) {
		dbgtext( "request_remote_level2_async_oplock_break: sending an asynchronous oplock break message to ");
		dbgtext( "pid %d on port %d ", (int)share_entry->pid, share_entry->op_port );
		dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
            (unsigned int)dev, (double)inode, file_id );
	}

	if(sys_sendto(oplock_sock,op_break_msg,OPLOCK_BREAK_MSG_LEN,0,
			(struct sockaddr *)&addr_out,sizeof(addr_out)) < 0) {
		if( DEBUGLVL( 0 ) ) {
			dbgtext( "request_remote_level2_async_oplock_break: failed when sending a oplock " );
			dbgtext( "break message to pid %d ", (int)share_entry->pid );
			dbgtext( "on port %d ", share_entry->op_port );
			dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
				(unsigned int)dev, (double)inode, file_id );
			dbgtext( "Error was %s\n", strerror(errno) );
		}
		return False;
	}

	DEBUG(3,("request_remote_level2_async_oplock_break: sent async break message to level II entry.\n"));
	return True;
}

/****************************************************************************
 This function is called on any file modification or lock request. If a file
 is level 2 oplocked then it must tell all other level 2 holders to break to none.
****************************************************************************/

void release_level_2_oplocks_on_change(files_struct *fsp)
{
	share_mode_entry *share_list = NULL;
	pid_t pid = sys_getpid();
	int num_share_modes = 0;
	int i;
	BOOL dummy;

	/*
	 * If this file is level II oplocked then we need
	 * to grab the shared memory lock and inform all
	 * other files with a level II lock that they need
	 * to flush their read caches. We keep the lock over
	 * the shared memory area whilst doing this.
	 */

	if (!LEVEL_II_OPLOCK_TYPE(fsp->oplock_type))
		return;

	if (lock_share_entry_fsp(fsp) == False) {
		DEBUG(0,("release_level_2_oplocks_on_change: failed to lock share mode entry for file %s.\n", fsp->fsp_name ));
	}

	num_share_modes = get_share_modes(fsp->dev, fsp->inode, &share_list,
					  &dummy);

	DEBUG(10,("release_level_2_oplocks_on_change: num_share_modes = %d\n", 
			num_share_modes ));

	for(i = 0; i < num_share_modes; i++) {
		share_mode_entry *share_entry = &share_list[i];

		/*
		 * As there could have been multiple writes waiting at the lock_share_entry
		 * gate we may not be the first to enter. Hence the state of the op_types
		 * in the share mode entries may be partly NO_OPLOCK and partly LEVEL_II
		 * oplock. It will do no harm to re-send break messages to those smbd's
		 * that are still waiting their turn to remove their LEVEL_II state, and
		 * also no harm to ignore existing NO_OPLOCK states. JRA.
		 */

		DEBUG(10,("release_level_2_oplocks_on_change: share_entry[%i]->op_type == %d\n",
				i, share_entry->op_type ));

		if (share_entry->op_type == NO_OPLOCK)
			continue;

		/* Paranoia .... */
		if (EXCLUSIVE_OPLOCK_TYPE(share_entry->op_type)) {
			DEBUG(0,("release_level_2_oplocks_on_change: PANIC. share mode entry %d is an exlusive oplock !\n", i ));
			unlock_share_entry(fsp->conn, fsp->dev, fsp->inode);
			abort();
		}

		/*
		 * Check if this is a file we have open (including the
		 * file we've been called to do write_file on. If so
		 * then break it directly without releasing the lock.
		 */

		if (pid == share_entry->pid) {
			files_struct *new_fsp = file_find_dif(share_entry->dev, share_entry->inode, share_entry->share_file_id);

			/* Paranoia check... */
			if(new_fsp == NULL) {
				DEBUG(0,("release_level_2_oplocks_on_change: PANIC. share mode entry %d is not a local file !\n", i ));
				unlock_share_entry(fsp->conn, fsp->dev, fsp->inode);
				abort();
			}

			DEBUG(10,("release_level_2_oplocks_on_change: breaking our own oplock.\n"));

			oplock_break_level2(new_fsp, True);

		} else {

			/*
			 * This is a remote file and so we send an asynchronous
			 * message.
			 */

			DEBUG(10,("release_level_2_oplocks_on_change: breaking remote oplock (async).\n"));
			request_remote_level2_async_oplock_break(share_entry);
		}
	}

	SAFE_FREE(share_list);
	unlock_share_entry_fsp(fsp);

	/* Paranoia check... */
	if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type)) {
		DEBUG(0,("release_level_2_oplocks_on_change: PANIC. File %s still has a level II oplock.\n", fsp->fsp_name));
		smb_panic("release_level_2_oplocks_on_change");
	}
}

/****************************************************************************
 Send a 'retry your open' message to a process with a deferred open entry.
****************************************************************************/

BOOL send_deferred_open_retry_message(deferred_open_entry *entry)
{
	char de_msg[DEFERRED_OPEN_MSG_LEN];
	struct sockaddr_in addr_out;
	pid_t pid = sys_getpid();

	memset(de_msg, '\0', DEFERRED_OPEN_MSG_LEN);
	SSVAL(de_msg,DEFERRED_OPEN_CMD_OFFSET,RETRY_DEFERRED_OPEN_CMD);
	memcpy(de_msg+DEFERRED_OPEN_PID_OFFSET,(char *)&pid,sizeof(pid));
	memcpy(de_msg+DEFERRED_OPEN_DEV_OFFSET,(char *)&entry->dev,sizeof(entry->dev));
	memcpy(de_msg+DEFERRED_OPEN_INODE_OFFSET,(char *)&entry->inode,sizeof(entry->inode));
	memcpy(de_msg+DEFERRED_OPEN_MID_OFFSET,(char *)&entry->mid,sizeof(entry->mid));

	/* Set the address and port. */
	memset((char *)&addr_out,'\0',sizeof(addr_out));
	addr_out.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
	addr_out.sin_port = htons( entry->port );
	addr_out.sin_family = AF_INET;
   
	if( DEBUGLVL( 3 ) ) {
		dbgtext( "send_deferred_open_retry_message: sending a message to ");
		dbgtext( "pid %d on port %d ", (int)entry->pid, entry->port );
		dbgtext( "for dev = %x, inode = %.0f, mid = %u\n",
			(unsigned int)entry->dev, (double)entry->inode, (unsigned int)entry->mid );
	}

	if(sys_sendto(oplock_sock,de_msg,DEFERRED_OPEN_MSG_LEN,0,
			(struct sockaddr *)&addr_out,sizeof(addr_out)) < 0) {
		if( DEBUGLVL( 0 ) ) {
			dbgtext( "send_deferred_open_retry_message: failed sending a message to ");
			dbgtext( "pid %d on port %d ", (int)entry->pid, entry->port );
			dbgtext( "for dev = %x, inode = %.0f, mid = %u\n",
				(unsigned int)entry->dev, (double)entry->inode, (unsigned int)entry->mid );
			dbgtext( "Error was %s\n", strerror(errno) );
		}
		return False;
	}
	return True;
}

/****************************************************************************
 Setup oplocks for this process.
****************************************************************************/

BOOL init_oplocks(void)
{
	struct sockaddr_in sock_name;
	socklen_t len = sizeof(sock_name);

	DEBUG(3,("open_oplock_ipc: opening loopback UDP socket.\n"));

	/* Open a lookback UDP socket on a random port. */
	oplock_sock = open_socket_in(SOCK_DGRAM, 0, 0, htonl(INADDR_LOOPBACK),False);
	if (oplock_sock == -1) {
		DEBUG(0,("open_oplock_ipc: Failed to get local UDP socket for \
address %lx. Error was %s\n", (long)htonl(INADDR_LOOPBACK), strerror(errno)));
		global_oplock_port = 0;
		return(False);
	}

	/* Find out the transient UDP port we have been allocated. */
	if(getsockname(oplock_sock, (struct sockaddr *)&sock_name, &len)<0) {
		DEBUG(0,("open_oplock_ipc: Failed to get local UDP port. Error was %s\n",
			 strerror(errno)));
		close(oplock_sock);
		oplock_sock = -1;
		global_oplock_port = 0;
		return False;
	}
	global_oplock_port = ntohs(sock_name.sin_port);

	if (lp_kernel_oplocks()) {
#if HAVE_KERNEL_OPLOCKS_IRIX
		koplocks = irix_init_kernel_oplocks();
#elif HAVE_KERNEL_OPLOCKS_LINUX
		koplocks = linux_init_kernel_oplocks();
#endif
	}

	DEBUG(3,("open_oplock ipc: pid = %d, global_oplock_port = %u\n", 
		 (int)sys_getpid(), global_oplock_port));

	return True;
}