path: root/source4/Makefile.in

#########################################################################
# Makefile.in for Samba - rewritten for autoconf support
# Copyright Andrew Tridgell 1992-2003
# Copyright (C) 2001 by Martin Pool <mbp@samba.org>
# Copyright (C) 2002 Andrew Bartlett <abartlet@samba.org>
# Copyright (C) 2003 Anthony Liguori <aliguor@us.ibm.com>
# Copyright (C) 2003 James Myers <myersjj@samba.org>
# Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org>
# Copyright (C) 2004 Stefan Metzmacher <metze@samba.org>
###########################################################################

prefix=@prefix@
exec_prefix=@exec_prefix@

LIBS=@LIBS@ @LDAP_LIBS@ @KRB5_LIBS@
CC=@CC@
SHLD=@SHLD@
CFLAGS=@CFLAGS@
CPPFLAGS=@CPPFLAGS@
LDFLAGS=@LDFLAGS@
LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
PERL=@PERL@
DYNEXP=@DYNEXP@

TERMLDFLAGS=@TERMLDFLAGS@
TERMLIBS=@TERMLIBS@

VPATH=@srcdir@
srcdir=@srcdir@
builddir=@builddir@
SHELL=/bin/sh

BASEDIR= @prefix@
BINDIR = @bindir@
SBINDIR = @sbindir@
LIBDIR = @libdir@
CONFIGDIR = @configdir@
VARDIR = @localstatedir@

# The permissions to give the executables
INSTALLPERMS = 0755

# set these to where to find various files
# These can be overridden by command line switches (see smbd(8))
# or in smb.conf (see smb.conf(5))
LOGFILEBASE = @logfilebase@
CONFIGFILE = $(CONFIGDIR)/smb.conf
LMHOSTSFILE = $(CONFIGDIR)/lmhosts

# This is where smbpasswd et al go
PRIVATEDIR = @privatedir@
SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd

# the directory where lock files go
LOCKDIR = @lockdir@

# the directory where pid files go
PIDDIR = @piddir@

FLAGS = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I. $(CPPFLAGS) -I$(srcdir)
FLAGS32 =

PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATEDIR)\"
PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\"  -DSBINDIR=\"$(SBINDIR)\"
PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" 
PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\" 
PATH_FLAGS4 = $(PATH_FLAGS3) -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
	      -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\"
PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)

# Note that all executable programs now provide for an optional executable suffix.

SBIN_PROGS = bin/smbd@EXEEXT@

BIN_PROGS = bin/smbclient@EXEEXT@ 

TORTURE_PROGS = bin/smbtorture@EXEEXT@ \
		bin/gentest@EXEEXT@ \
		bin/locktest@EXEEXT@ \
		bin/masktest@EXEEXT@ \
		bin/ndrdump@EXEEXT@

CHARSET_MODULES = @CHARSET_MODULES@
CHARSET_LIBDIR = $(LIBDIR)/charset
DCERPC_MODULES = @DCERPC_MODULES@
DCERPC_LIBDIR = $(LIBDIR)/dcerpc
NTVFS_MODULES = @NTVFS_MODULES@
NTVFS_LIBDIR = $(LIBDIR)/ntvfs

MODULES = $(CHARSET_MODULES) $(DCERPC_MODULES) $(NTVFS_MODULES)

######################################################################
# object file lists
######################################################################

TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o 

CHARSET_OBJS = @CHARSET_OBJS@

LIB_OBJ = lib/version.o lib/debug.o lib/fault.o \
          lib/getsmbpass.o lib/interface.o lib/md4.o \
          lib/interfaces.o lib/pidfile.o lib/replace.o \
          lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
	  lib/genrand.o lib/username.o \
	  lib/util_getent.o lib/util_pw.o lib/smbrun.o \
	  lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
	  lib/xfile.o lib/wins_srv.o \
	  lib/util_str.o lib/util_sid.o lib/util_uuid.o \
	  lib/util_unistr.o lib/util_file.o lib/data_blob.o \
	  lib/util.o lib/util_sock.o \
	  lib/talloc.o lib/substitute.o lib/fsusage.o \
	  lib/ms_fnmatch.o lib/select.o lib/messages.o \
	  lib/tallocmsg.o lib/dmallocmsg.o \
	  lib/md5.o lib/hmacmd5.o lib/smbpasswd.o \
	  nsswitch/wb_client.o nsswitch/wb_common.o \
	  lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
	  lib/gencache.o $(TDB_OBJ) \
	  lib/module.o \
	  lib/ldap_escape.o lib/events.o lib/mutex.o $(CHARSET_OBJS)

READLINE_OBJ = lib/readline.o

POPT_LIB_OBJ = lib/popt_common.o 

PARAM_OBJ = param/loadparm.o param/params.o dynconfig.o

SECRETS_OBJ = passdb/secrets.o

LIBNMB_OBJ =	libcli/unexpected.o libcli/namecache.o libcli/nmblib.o \
		libcli/namequery.o 

LIBCLIUTIL_OBJ = libcli/util/asn1.o \
		libcli/util/smberr.o \
		libcli/util/doserr.o libcli/util/errormap.o \
		libcli/util/pwd_cache.o libcli/util/clierror.o libcli/util/cliutil.o \
		libcli/util/nterr.o libcli/util/smbdes.o libcli/util/smbencrypt.o

LIBRAW_NDR_OBJ = librpc/ndr/ndr.o librpc/ndr/ndr_basic.o librpc/ndr/ndr_sec.o \
		librpc/ndr/ndr_spoolss_buf.o \
		librpc/gen_ndr/tables.o librpc/gen_ndr/ndr_dcerpc.o \
		librpc/gen_ndr/ndr_echo.o librpc/gen_ndr/ndr_misc.o \
		librpc/gen_ndr/ndr_lsa.o librpc/gen_ndr/ndr_dfs.o \
		librpc/gen_ndr/ndr_samr.o librpc/gen_ndr/ndr_spoolss.o \
		librpc/gen_ndr/ndr_wkssvc.o librpc/gen_ndr/ndr_srvsvc.o \
		librpc/gen_ndr/ndr_atsvc.o librpc/gen_ndr/ndr_eventlog.o \
		librpc/gen_ndr/ndr_epmapper.o librpc/gen_ndr/ndr_winreg.o \
		librpc/gen_ndr/ndr_mgmt.o librpc/gen_ndr/ndr_protected_storage.o \
		librpc/gen_ndr/ndr_dcom.o librpc/gen_ndr/ndr_wzcsvc.o \
		librpc/gen_ndr/ndr_browser.o librpc/gen_ndr/ndr_w32time.o \
		librpc/gen_ndr/ndr_scerpc.o librpc/gen_ndr/ndr_ntsvcs.o \
		librpc/gen_ndr/ndr_netlogon.o librpc/gen_ndr/ndr_trkwks.o \
		librpc/gen_ndr/ndr_keysvc.o

LIBRAW_RPC_OBJ = librpc/rpc/dcerpc.o librpc/rpc/dcerpc_auth.o \
		librpc/rpc/dcerpc_util.o \
		librpc/rpc/dcerpc_schannel.o librpc/rpc/dcerpc_ntlm.o \
		librpc/rpc/dcerpc_smb.o librpc/rpc/dcerpc_tcp.o

LIBNTLMSSP_OBJ = libcli/auth/ntlmssp.o libcli/auth/ntlmssp_parse.o \
		libcli/auth/ntlmssp_sign.o libcli/auth/schannel.o

LIBCLIAUTH_OBJ = $(LIBNTLMSSP_OBJ) libcli/auth/credentials.o

LIBRAW_OBJ = libcli/raw/rawfile.o libcli/raw/smb_signing.o  \
	     libcli/raw/clisocket.o libcli/raw/clitransport.o \
	     libcli/raw/clisession.o libcli/raw/clitree.o \
	     libcli/raw/clikrb5.o libcli/raw/clispnego.o libcli/raw/rawrequest.o \
	     libcli/raw/rawreadwrite.o \
	     libcli/raw/rawsearch.o libcli/raw/rawsetfileinfo.o libcli/raw/raweas.o \
	     libcli/raw/rawtrans.o libcli/raw/clioplock.o \
	     libcli/raw/rawnegotiate.o libcli/raw/rawfsinfo.o \
	     libcli/raw/rawfileinfo.o libcli/raw/rawnotify.o \
	     libcli/raw/rawioctl.o libcli/raw/rawacl.o \
	     $(LIBRAW_NDR_OBJ) $(LIBRAW_RPC_OBJ) $(LIBCLIUTIL_OBJ) \
	     $(LIBNMB_OBJ) $(LIBCLIAUTH_OBJ) 

LIBSMB_OBJ = libcli/clireadwrite.o libcli/cliconnect.o \
	     libcli/clifile.o libcli/clilist.o libcli/clitrans2.o  \
	     libcli/climessage.o \
	     libcli/clideltree.o \
	     $(LIBRAW_OBJ)

SMBD_OBJ_MAIN = smbd/server.o

SMB_OBJS = @SMB_OBJS@
SMB_LIBS = @SMB_LIBS@

AUTH_OBJS = @AUTH_OBJS@
AUTH_LIBS = @AUTH_LIBS@

PASSDB_OBJS = @PASSDB_OBJS@
PASSDB_LIBS = @PASSDB_LIBS@

NTVFS_OBJS = @NTVFS_OBJS@
NTVFS_LIBS = @NTVFS_LIBS@

DCERPC_OBJS = @DCERPC_OBJS@
DCERPC_LIBS = @DCERPC_LIBS@

SMBD_OBJ_SRV =	smbd/process.o \
		lib/server_mutex.o \
		smbd/build_options.o \
		smbd/rewrite.o \
		$(DCERPC_OBJS) $(SMB_OBJS) $(AUTH_OBJS) $(PASSDB_OBJS) $(NTVFS_OBJS) @SMBD_EXTRA_OBJS@

PROCESS_MODEL_OBJS = @PROCESS_MODEL_OBJS@
PROCESS_MODEL_LIBS = @PROCESS_MODEL_LIBS@

SMBD_OBJ_BASE = $(PROCESS_MODEL_OBJS) $(SMBD_OBJ_SRV) \
		$(PARAM_OBJ) $(SECRETS_OBJ)  \
		$(LIB_OBJ) $(POPT_LIB_OBJ) $(LIBSMB_OBJ)

SMBD_OBJS = $(SMBD_OBJ_MAIN) $(SMBD_OBJ_BASE) @BUILD_POPT@
SMBD_LIBS = $(LIBS) $(SMB_LIBS) $(PROCESS_MODEL_LIBS) $(DCERPC_LIBS) $(AUTH_LIBS) $(PASSDB_LIBS) $(NTVFS_LIBS)

CLIENT_OBJ1 = client/client.o client/clitar.o libcli/raw/clirewrite.o

CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(SECRETS_OBJ) \
	     $(LIB_OBJ) \
             $(READLINE_OBJ) $(POPT_LIB_OBJ)

TORTURE_RAW_OBJS = @TORTURE_RAW_OBJS@

TORTURE_RPC_OBJS = @TORTURE_RPC_OBJS@

TORTURE_OBJS = @TORTURE_OBJS@

SMBTORTURE_OBJS = $(TORTURE_OBJS) $(SECRETS_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) $(LIB_OBJ)
SMBTORTURE_LIBS = $(LIBS)

GENTEST_OBJ = torture/gentest.o torture/torture_util.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
		$(LIB_OBJ) $(SECRETS_OBJ) libcli/raw/clirewrite.o

MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
		$(LIB_OBJ) $(SECRETS_OBJ) libcli/raw/clirewrite.o

LOCKTEST_OBJ = torture/locktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
		$(LIB_OBJ) $(SECRETS_OBJ) libcli/raw/clirewrite.o

NDRDUMP_OBJ = utils/ndrdump.o utils/rewrite.o \
		$(LIBSMB_OBJ) $(PARAM_OBJ) $(LIB_OBJ) $(SECRETS_OBJ)

PROTO_OBJ = $(SMBD_OBJ_SRV) \
	    $(SMBD_OBJ_MAIN) $(PROCESS_MODEL_OBJS) \
	    $(LIBSMB_OBJ) \
	    $(TORTURE_OBJS) \
	    $(PARAM_OBJ) $(SECRETS_OBJ) \
	    $(READLINE_OBJ) $(CLIENT_OBJ1) \
	    $(LIB_OBJ) $(POPT_LIB_OBJ)

POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
          popt/popthelp.o popt/poptparse.o

######################################################################
# now the rules...
######################################################################
all: SHOWFLAGS $(SBIN_PROGS) $(BIN_PROGS) $(TORTURE_PROGS) $(MODULES)

torture : SHOWFLAGS $(TORTURE_PROGS)

smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@

gentest: SHOWFLAGS bin/gentest@EXEEXT@

masktest : SHOWFLAGS bin/masktest@EXEEXT@

locktest : SHOWFLAGS bin/locktest@EXEEXT@

modules: SHOWFLAGS proto_exists $(MODULES)

everything: all

.SUFFIXES:
.SUFFIXES: .c .o .po .po32 .lo

SHOWFLAGS: basics
	@echo "Using FLAGS = $(FLAGS)"
	@echo "      FLAGS32 = $(FLAGS32)"
	@echo "      LIBS = $(LIBS)"
	@echo "      LDSHFLAGS = $(LDSHFLAGS)"
	@echo "      LDFLAGS = $(LDFLAGS)"

MAKEDIR = || exec false; \
	  if test -d "$$dir"; then :; else \
	  echo mkdir "$$dir"; \
	  mkdir -p "$$dir" >/dev/null 2>&1 || \
	  test -d "$$dir" || \
	  mkdir "$$dir" || \
	  exec false; fi || exec false

.c.o:
	@echo Compiling $*.c
	@$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
	  -o $@ 
@BROKEN_CC@	-mv `echo $@ | sed 's%^.*/%%g'` $@

# 'make pch' is extremely useful for fast compiles if you have gcc-3.4
pch: basics
	rm -f $(srcdir)/include/includes.h.gch
	$(CC) -I. -I$(srcdir) $(FLAGS) -c $(srcdir)/include/includes.h -o $(srcdir)/include/includes.h.gch


idl_full: build/pidl/idl.pm
	CPP="@CPP@" script/build_idl.sh FULL

idl: build/pidl/idl.pm
	@CPP="@CPP@" script/build_idl.sh

basics: idl proto_test

build/pidl/idl.pm: build/pidl/idl.yp
	-yapp -s build/pidl/idl.yp

# These dependencies are only approximately correct: we want to make
# sure Samba's paths are updated if ./configure is re-run.  Really it
# would be nice if "make prefix=/opt/samba all" also rebuilt things,
# but since we also require "make install prefix=/opt/samba" *not* to
# rebuild it's a bit hard.

dynconfig.o: dynconfig.c Makefile
	@echo Compiling $*.c
	@$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@ 

dynconfig.po: dynconfig.c Makefile
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
	  dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
	@echo Compiling $*.c with @PICFLAG@
	@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
@BROKEN_CC@	-mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
@POBAD_CC@	@mv $*.po.o $@

lib/version.o: lib/version.c include/version.h
	@echo Compiling $*.c
	@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -c $< -o $@ 

lib/version.po: lib/version.c include/version.h
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
	  dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
	@echo Compiling $*.c with @PICFLAG@
	@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
@BROKEN_CC@	-mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
@POBAD_CC@	@mv $*.po.o $@

.c.po: 
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
	  dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
	@echo Compiling $*.c with @PICFLAG@
	@$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
@BROKEN_CC@	-mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
@POBAD_CC@	@mv $*.po.o $@

# this is for IRIX
.c.po32: 
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
	  dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
	@echo Compiling $*.c with @PICFLAG@ and -32
	@$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
	  -o $*.po32.o 
@BROKEN_CC@	-mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
	@mv $*.po32.o $@

bin/.dummy:
	@if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
	  dir=bin $(MAKEDIR); fi
	@: >> $@ || : > $@ # what a fancy emoticon!

bin/smbd@EXEEXT@: $(SMBD_OBJS) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBD_OBJS) $(LDFLAGS) $(DYNEXP) $(SMBD_LIBS)

bin/smbclient@EXEEXT@: $(CLIENT_OBJ) @BUILD_POPT@ bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@

bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJS) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJS) $(LDFLAGS) $(SMBTORTURE_LIBS)

bin/ndrdump@EXEEXT@: $(NDRDUMP_OBJ) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(NDRDUMP_OBJ) $(LDFLAGS) $(LIBS)

bin/gentest@EXEEXT@: $(GENTEST_OBJ) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(GENTEST_OBJ) $(LDFLAGS) $(LIBS)

bin/masktest@EXEEXT@: $(MASKTEST_OBJ) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS)

bin/locktest@EXEEXT@: $(LOCKTEST_OBJ) bin/.dummy
	@echo Linking $@
	@$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS)

install: installbin installtorture installdat 

# DESTDIR is used here to prevent packagers wasting their time
# duplicating the Makefile. Remove it and you will have the privelege
# of package each samba release for muliple versions of multiple
# distributions and operating systems, or at least supplying patches
# to all the packaging files required for this, prior to committing
# the removal of DESTDIR. Do not remove it even though you think it
# is not used

installdirs:
	@$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR)
	@$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DESTDIR)$(NTVFS_LIBDIR)

installservers: all installdirs
	@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)

installbin: all installdirs
	@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
	@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS)

installtorture: all installdirs
	@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(TORTURE_PROGS)

installmodules: all installdirs
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(NTVFS_LIBDIR) $(NTVFS_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DCERPC_MODULES)
	@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(CHARSET_MODULES)

installdat: installdirs
	@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir)

# revert to the previously installed version
revert:
	@$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)

.PHONY: showlayout

showlayout: 
	@echo "Samba will be installed into:"
	@echo "  basedir: $(BASEDIR)"
	@echo "  bindir:  $(BINDIR)"
	@echo "  sbindir: $(SBINDIR)"
	@echo "  libdir:  $(LIBDIR)"
	@echo "  vardir:  $(VARDIR)"

uninstall: uninstallbin uninstalltorture

uninstallbin:
	@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS)
	@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS)

uninstalltorture:
	@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(TORTURE_PROGS)

uninstallmodules:
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(NTVFS_LIBDIR) $(DESTDIR)$(NTVFS_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DESTDIR)$(DCERPC_MODULES)
	@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(DESTDIR)$(CHARSET_MODULES)

# Toplevel clean files
TOPFILES=dynconfig.o dynconfig.po

clean: delheaders
	-rm -f core */*~ *~ */*.o */*/*.o */*/*.po */*/*.po32 */*.po */*.po32 */*.@SHLIBEXT@ \
		$(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(MODULES) $(TORTURE_PROGS) \
		.headers.stamp 
	-rm -rf librpc/gen_*

# Making this target will just make sure that the prototype files
# exist, not necessarily that they are up to date.  Since they're
# removed by "make clean" this will always be run when you do anything
# afterwards.
proto_exists: include/proto.h include/build_env.h

delheaders:
	@/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h 

include/proto.h:
	@cd $(srcdir) && $(SHELL) script/mkproto.sh $(PERL) \
	  -h _PROTO_H_ $(builddir)/include/proto.h \
	  $(PROTO_OBJ)

include/build_env.h:
	@echo Building include/build_env.h
	@cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h

# "make headers" or "make proto" calls a subshell because we need to
# make sure these commands are executed in sequence even for a
# parallel make.
headers: delheaders include/proto.h include/build_env.h 

proto: idl headers 

proto_test:
	@[ -f include/proto.h ] || $(MAKE) proto

.PHONY: headers proto

etags:
	etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`

ctags:
	ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`

realclean: clean delheaders
	-rm -f config.log bin/.dummy

distclean: realclean
	-rm -f include/config.h Makefile
	-rm -f config.status config.cache

realdistclean: distclean
	-rm -f include/config.h.in
	-rm -f lib/version.h
	-rm -f configure

# when configure.in is updated, reconfigure
$(srcdir)/configure: $(srcdir)/configure.in
	@echo "WARNING: you need to rerun ./autogen.sh"

config.status: $(srcdir)/configure
	@echo "WARNING: you need to run configure"

Makefile: $(srcdir)/Makefile.in config.status
	@echo "WARNING: you need to run ./config.status"