Remove ELAPI from the SSSD repository

ELAPI now lives in its own project at
https://fedorahosted.org/ELAPI

1 files changed, 0 insertions, 218 deletions

diff --git a/common/elapi/elapi_test/elapi_ut.conf b/common/elapi/elapi_test/elapi_ut.conf
deleted file mode 100644
index a42045a2..00000000
--- a/common/elapi/elapi_test/elapi_ut.conf
+++ /dev/null
@@ -1,218 +0,0 @@
-; This is a sample configuration file for ELAPI
-
-; The dispatcher section defines general configuration
-; for the ELAPI. It has following configuration parameters:
-;
-; targets - (required)
-;           Defines possible logical destinations where message can be sent.
-;           It is one of the arguments of the calling interface. It is numeric.
-;           It is done this way for performance reasons so it is faster to compare.
-;           But in the configuration it is easier to deal with targets as strings.
-;           To overcome this issue each target is assigned a number in the INI file.
-;           The ELAPI convention is to have three default targets:
-;           "debug", "audit" and "log" but application developers can add others as needed.
-;           The default value for debug target is 1, for audit 2 and log is 4.
-;           Changing the value defined for debug to be 7 ( logical OR of 1, 2 and 4)
-;           will result in all messages sent into debug log.
-;           This might be convenient during troubleshooting and would allow seeing all
-;           events emitted by the application in one place.
-;           If you want the event to be sent into two targets at the same time
-;           add a target with different name but same value.
-;           For example if the log events need to go to local and remote files
-;           in parallel you would create another target: logremote
-;           and give it same value as log (which by convention is 4)
-
-
-
-[dispatcher]
-targets=debug, audit, log
-
-; Inside section for each target the following parameters can be defined:
-;
-; value - (optional)
-;         Stores the value associated with this target.
-;         If the bit-wise AND of this value and the value provided by caller
-;         of the interface is greater than 0 the event is logged into the
-;         target destination. If omitted all events are sent to this target.
-; sinks - (required)
-;         Defines the list of the sink names that need to be loaded
-;         each will have its own section.
-;         Only one of the sinks is active - first in the list.
-;         The list contains sinks in the fail over order.
-;
-
-[debug]
-value = 1
-sinks = debugfile, screen
-
-[audit]
-value = 2
-sinks = auditfile, syslog
-
-[log]
-value = 4
-sinks = logfile, syslog
-
-; Each sink needs to have it's own section.
-;
-; COMMON FOR EVERY SINK
-;
-; provider - (required)
-;            Defines the name of the sink or the special reserved word to
-;            indicate that it is a sink provided by ELAPI library.
-;
-;            Special sinks provided by ELAPI are:
-;             file
-;             syslog
-;
-;            Example:
-;            provider=file
-;
-;            this would mean the destination for this sink is a file.
-;
-;            If the sink is provided as an external plugin
-;            the syntax should be the following:
-;
-;            provider=custom_audit
-;
-;            In this case the ELAPI will try to load shared library with the name
-;            constructed using specified value. In the given example
-;            ELAPI will try to load libelapi_sink_custom_audit.so library.
-;            The general pattern is: libelapi_sink_<provider>.so
-;
-; required - (optional)
-;            Defines whether it is a required sink?
-;            If not present the dispatcher will return error at load time.
-;
-; onerror -  if the sink got an error what should dispatcher do?
-;             0 - retry (default)
-;             1 - disable
-;
-; timeout -  for how long one should wait before trying to revive the sink
-;            default is 60 seconds
-;
-; synch -    yes/no (default no) - a flag that forces the sink to act synchronously
-;                                  even if it can support async operations.
-;            If application needs to have some events with guaranteed delivery
-;            and wishes to block for those the implementation should
-;            send such events to a special target that would consist
-;            of the sinks that act in the synch mode and guarantee
-;            the delivery or return failure.
-
-; SPECIFIC CONFIGURATION PARAMETERS FOR DIFFERENT PROVIDERS
-;
-; 1) FILE PROVIDER
-;
-; filename - name of the log file. If not specified <appname>.log will be used.
-;            Avoid using the same name of the file for different sinks,
-;            the result might be unpredictable.
-;            If file name is "stderr" the output will be sent to file descriptor 2.
-;            If application closed file descriptor 2 the log attempt will
-;            cause error and onerror value for the sink will be ignored.
-;            The sink will be permanently disabled causing ELAPI to skip
-;            it.
-;            The "keepopen" and "fsyncmode" parameters are ignored for
-;            "stderr" sink.
-;
-; keepopen - yes/no (default no) - keep file open
-;
-; outmode - 0 - CSV like (default)
-;           1 - use format specifier
-;           2 - HTML
-;           3 - XML
-;           4 - JSON
-;           5 - key-value pairs
-;
-; set -     use only specific subset of fields in the given order
-;           comma separated list of field names that are expected from
-;           an event
-;           The set can optionally end with an item:
-;           @  - this would indicate that all the rest of the fields need to
-;                be added at the end as separate fields.
-;           @n - where n is one of the modes from "outmode" list.
-;                in this case the all remaining fields will be jammed into one field
-;                using specified format. In case of CSV jammed into CSV it is recommended
-;                to use qualifier and set cvsescape to true
-;           If the @ sign is absent only fields from the specified set will be
-;           included into the output.
-;           If event does not contain a specific field it will be empty in the output.
-;
-; fsyncmode - Defines if the data needs to be flushed to disk and how frequently
-;             If this value is missing or 0 - no flushing.
-;             If it is positive it denotes the number of events before next flush.
-;             If it is negative it denotes the number of seconds before next flush.
-;             Ignored if file is opened and closed each time.
-;
-; marker    - (optional)
-;             Default is "\n".
-;             Marker specifies a line that will be inserted into the file to denote
-;             the beginning of a new run. The provided string is used as is
-;             as a format argument for the strftime() function. The string can
-;             contain zero or one time stamp format specifier listed in a man page
-;             for the strftime function(). Providing an invalid marker can
-;             potentially cause your application to crash.
-;
-;
-; Format specific parameters:
-;
-; CSV related parameters (all optional):
-;
-; csvqual    - what to use as string qualifier for CSV outmode.
-;              One character string.
-;              If empty no qualifier is used.
-;              If not specified then double quote is used.
-; csvsep     - what to use as CSV field separator.
-;              One character string.
-;              If empty no separator is used.
-;              If not specified comma is used.
-; csvescsym  - which symbol to use as escape symbol.
-;              One character string.
-;              If empty or no qualifier no escaping is done.
-;              If missing the "\" (backslash) is used.
-;              Escaping is done only if both the qualifier
-;              and the escape symbol are not empty.
-; csvspace   - what to use as space after the separator. Default is space.
-;              use "space" for space
-;              use "tab" for tab
-;              use "cr" for new line
-;              Other value would cause an error.
-; csvnumsp   - number of space characters to use. Default is 1.
-; csvheader  - yes/no (default no). Include header into csv file.
-;              Respected only if the "set" is explicitely defined.
-;
-;
-; HTML related parameters
-;
-; htmlheader - create header row
-;              ... TO BE Continued...
-
-[debugfile]
-provider=file
-required=true
-onerror=1
-timeout=90
-
-[logfile]
-provider=file
-required=true
-onerror=0
-timeout=60
-
-[auditfile]
-provider=file
-required=true
-onerror=1
-timeout=90
-
-[screen]
-provider=file
-filename=stderr
-keepopen=false
-synch=false
-onerror=0
-fsyncmode=-10
-set=a, b, c, @0
-
-[syslog]
-provider=syslog
-synch=yes