summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-12-15Update SV translationGöran Uddeborg1-86/+101
2009-12-15Use --with-ldb-lib-dir while running make distcheckSumit Bose1-0/+2
2009-12-15Build python modules in builddirSumit Bose2-4/+13
This requires increasing the required autoconf version to 2.59 for use of $(abs_builddir). Fix uninstallation of python files as well
2009-12-15Check for minimal version of checkSumit Bose1-1/+1
Test loops and _i are only available since 0.9.5.
2009-12-15Add elapi_ut.conf to the list of dist filesSumit Bose2-3/+4
Some newlines are added, too.
2009-12-15Use sys.exit instead of exitSumit Bose1-1/+2
2009-12-15fail over: Change the first server pick logicMartin Nagy1-5/+26
The logic of selecting the server to fail over to was changed so that we start from the server next to the one that didn't work the last time. This is because the status of a server that failed last time might get reset before we try another one. This can cause that we try to use the nonworking server repeatedly, not giving a chance to other servers. Fixes: #321
2009-12-15Don't consider one address with different port numbers as the sameMartin Nagy6-21/+38
There were two problems with the code. We were using fo_set_server_status() instead of fo_set_port_status() when we failed to connect to a service. This is a problem because if two services use the same server, or we want to use one server with two different ports, marking the whole server as bad is incorrect. The other problem was that be_resolve_server_done() was comparing the hostent structures -- these are, however, equal across multiple server:port pairs with the same server addresses. Fixes: #321
2009-12-11Updating version to 0.99.1Stephen Gallagher1-1/+1
2009-12-10Fix stupid copy-paste errorStephen Gallagher1-1/+0
2009-12-10INI Correcting build warnings.Dmitri Pal2-8/+7
The previous patch included "config.h" into the public header which caused all sorts of redefinitions and warnings.
2009-12-10Fix DEBUG message for sysdb_initSumit Bose1-2/+2
2009-12-10Fix for #322, update from old database versions.Simo Sorce1-1/+14
2009-12-10Run SSSDConfig tests during 'make check'Stephen Gallagher2-89/+108
2009-12-10Remove default for ldap_use_start_tls in IPA providersStephen Gallagher1-1/+1
2009-12-10Add 'permit' and 'deny' access providers to SSSDConfig APIStephen Gallagher2-5/+16
2009-12-10Consolidate code for splitting strings by separatorJakub Hrozek6-163/+107
There were two functions for parsing strings by a separator. This patch consolidates on the one previously used in confdb. This also allows stripping the tokens of whitespace. Fixes: #319
2009-12-10Fix for #316Simo Sorce1-3/+3
We were never filling the group attrs because of an inverse return check. Plus fix a crash bug for using a pointer that is not a memory context.
2009-12-10Add Swedish translation for SSSD serverGöran Uddeborg2-0/+628
2009-12-10Fix processing of Boolean values in SSSDConfigStephen Gallagher4-23/+169
Previously, we were just casting the strings to bool, but this meant that all boolean values were "True". This patch solves the problem and adds regression tests for it.
2009-12-10Add missing SSSDConfig file for IPA for make installStephen Gallagher2-0/+2
Update tests to include IPA options
2009-12-10Document the failover feature in manpagesJakub Hrozek4-4/+61
Fixes: #309
2009-12-10Add Swedish translation for sss_clientGöran Uddeborg2-0/+37
2009-12-10Handle the special 02 upgrade case for 04->05Simo Sorce1-0/+7
2009-12-10Add rebuild task to memberof pluginSimo Sorce5-8/+858
This task allows us to rebuild memberuid and memberof attributes throughout the database. This way we can upgrade from version 0.4 databases that didn't generate and store memberuid. The task can be invoked by adding a speaicl named entry to the ldb file. The entry dn to use is: @MEMBEROF-REBUILD, the entry has no attributes and any attribute is ignored at present. The entry will not be stored in the database but will just trigger the task to execute a rebuild of the memberof and memberuid attributes
2009-12-10Always update sysdb to the latest versionSumit Bose1-3/+11
2009-12-10INI: Cleaning FIXME comments.Dmitri Pal3-7/+16
Added configurable key length. Changed comments for the functions that are currently not used and reserved for future functionality.
2009-12-10COLLECTION: Cleaning FIXME commentsDmitri Pal3-20/+2
I scanned through the code and made sure that the FIXME comments are either addressed or a corresponding ticket exists. I removed two comments that had "FIXME" in them. The tickets for those comments are #72 and #308.
2009-12-10COLLECTION Create reference to the top level collectionDmitri Pal3-21/+47
This patch adds ability to create a reference to the top level collection. Previously one could get reference only to collection inside other collection. With this change it becomes possible to have two pointers to the same top level collection from multiple places. COLLECTION Adding comment. COLLECTION: Some tracing
2009-12-10COMMON Improvements to the trace macroDmitri Pal1-9/+15
Added more distingushable indication to the trace messages that represent errors.
2009-12-09Add German translationFabian Affolter4-0/+696
2009-12-09Add missing options to sssd-ipa configuraionStephen Gallagher1-0/+72
2009-12-09Properly deny id_provider=filesStephen Gallagher2-6/+7
2009-12-09Correctly restart server status after the timeoutMartin Nagy1-1/+1
The macro STATUS_DIFF() was wrong causing the result to always be lower than 0, therefore the timeout was never reached. Fixes: #302
2009-12-09Add some debugging statements to fail_over and resolverMartin Nagy2-5/+69
These were very useful for debugging and hopefully still will be in the future.
2009-12-09Ensure that list_active_domains returns the real valueStephen Gallagher1-4/+16
Previously, we were accidentally filtering out domains that were not configured, so deleted domains might still appear in the active domain list. This patch should ensure that this never happens.
2009-12-09SSSDConfig.get_domain() should properly detect active stateStephen Gallagher2-0/+30
2009-12-09Don't build the SRV and TXT parsing code except for testsJakub Hrozek2-8/+18
2009-12-09Import ares 1.7.0 helpersJakub Hrozek10-116/+374
2009-12-09Change ares usage to be c-ares 1.7.0 compatibleJakub Hrozek3-87/+102
* Rename structure accordingly to ares upstream * Use new ares parsing functions in the wrappers * fix tests for ares 1.7
2009-12-09SSSDConfig API: fix deactivate_domain()Stephen Gallagher2-2/+73
deactivate_domain() would crash if it attempted to deactivate an already-inactive domain
2009-12-09Fix egg-info file generation in the spec fileMartin Nagy1-4/+4
We were actually listing files that are on the system, not those that we created in the $RPM_BUILD_ROOT. Also, by doing an echo with the regular expression, we put more than one file on one line. Rpmbuild doesn't like that and will not generate the rpms.
2009-12-09Reduce code duplication between LDAP child and Kerberos childJakub Hrozek4-234/+160
Fixes: #294
2009-12-09Fix RPM spec for RHEL6Stephen Gallagher1-1/+6
2009-12-08Do not start with provider=filesJakub Hrozek1-0/+6
Fixes: #233
2009-12-08Fix SSSDConfig API bugs around [de-]activation of domainsStephen Gallagher2-7/+152
Adds two new public functions: SSSDConfig.activate_domain() SSSDConfig.deactivate_domain() These two functions are used during the save_domain() call to ensure that the active domain list is always kept up to date.
2009-12-08Fix broken SSSDChangeConf.set() functionStephen Gallagher1-1/+1
The set function didn't do anything at all. It needed to use the ipachangeconf.merge() function to behave properly instead of mergeNew()
2009-12-08Reduce the verbosity of the SSSDConfigTestStephen Gallagher1-4/+4
Now it will report only failures or final success
2009-12-08Add SSSDDomain.set_name() function to SSSDConfig APIStephen Gallagher2-3/+77
This function will change the name of an existing domain
2009-12-08Add comments to document latest changesSimo Sorce1-0/+7
generated by cgit (git 2.34.1) at 2024-12-19 04:34:24 +0000