r18810: use a copy of samba4's talloc under lib/talloc/

to make mergeing easier.

metze
(This used to be commit d49ffbc19b29f7620e427de133ffab74721f37e8)

19 files changed, 4972 insertions, 117 deletions

diff --git a/source3/Makefile.in b/source3/Makefile.in
index ddb1c2a864..252f122c08 100644
--- a/source3/Makefile.in
+++ b/source3/Makefile.in
@@ -217,7 +217,7 @@ LIBNDR_GEN_OBJ = librpc/gen_ndr/ndr_unixinfo.o librpc/gen_ndr/ndr_lsa.o \
 
 RPC_PARSE_OBJ0 = rpc_parse/parse_prs.o rpc_parse/parse_misc.o
 
-TALLOC_OBJ = lib/talloc.o
+TALLOC_OBJ = lib/talloc/talloc.o
 
 LIB_WITHOUT_PROTO_OBJ = @LIBREPLACE_OBJS@ @SOCKET_WRAPPER_OBJS@
 
@@ -688,7 +688,7 @@ SHARESEC_OBJ  = $(SHARESEC_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(REGOBJS_OBJ)
 		$(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(DOSERR_OBJ) \
                 $(POPT_LIB_OBJ) $(SECRETS_OBJ)
 
-TALLOCTORT_OBJ = lib/talloctort.o $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
+TALLOCTORT_OBJ = lib/talloc/testsuite.o $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
                  $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(LIBSAMBA_OBJ) $(SECRETS_OBJ)
 
 RPCTORTURE_OBJ = torture/rpctorture.o \
diff --git a/source3/configure.in b/source3/configure.in
index 91796d87af..1efdaad257 100644
--- a/source3/configure.in
+++ b/source3/configure.in
@@ -231,6 +231,7 @@ done
 
 SAMBA_CPPFLAGS="-Iinclude -I${srcdir-.}/include  -I. -I${srcdir-.}"
 SAMBA_CPPFLAGS="${SAMBA_CPPFLAGS} -I${srcdir-.}/lib/replace"
+SAMBA_CPPFLAGS="${SAMBA_CPPFLAGS} -I${srcdir-.}/lib/talloc"
 SAMBA_CPPFLAGS="${SAMBA_CPPFLAGS} -I${srcdir-.}/tdb/include"
 SAMBA_CPPFLAGS="${SAMBA_CPPFLAGS} -I${srcdir-.}/libaddns"
 SAMBA_CPPFLAGS="${SAMBA_CPPFLAGS} -I${srcdir-.}/librpc"
diff --git a/source3/include/includes.h b/source3/include/includes.h
index 16056a56a1..ede93e5865 100644
--- a/source3/include/includes.h
+++ b/source3/include/includes.h
@@ -638,7 +638,7 @@ typedef int BOOL;
 #include "tdbutil.h"
 #include "tdbback.h"
 
-#include "talloc.h"
+#include "lib/talloc/talloc.h"
 /* And a little extension. Abort on type mismatch */
 #define talloc_get_type_abort(ptr, type) \
 	(type *)talloc_check_name_abort(ptr, #type)
diff --git a/source3/lib/talloc/Makefile.in b/source3/lib/talloc/Makefile.in
new file mode 100644
index 0000000000..14e8115692
--- /dev/null
+++ b/source3/lib/talloc/Makefile.in
@@ -0,0 +1,71 @@
+#!gmake
+#
+prefix = @prefix@
+datarootdir = @datarootdir@
+exec_prefix = @exec_prefix@
+includedir = @includedir@
+libdir = @libdir@
+mandir = @mandir@
+VPATH = @srcdir@:@libreplacedir@
+srcdir = @srcdir@
+builddir = @builddir@
+XSLTPROC = @XSLTPROC@
+INSTALLCMD = @INSTALL@
+CC = @CC@
+CFLAGS = @CFLAGS@ -DHAVE_CONFIG_H= -I. -I@srcdir@ -I@libreplacedir@
+EXTRA_TARGETS = @DOC_TARGET@
+
+.SUFFIXES: .c .o .3 .3.xml .xml .html
+
+LIBOBJ = @TALLOCOBJ@ @LIBREPLACEOBJ@
+
+all: showflags libtalloc.a testsuite $(EXTRA_TARGETS)
+
+showflags:
+	@echo 'talloc will be compiled with flags:'
+	@echo '  CFLAGS = $(CFLAGS)'
+	@echo '  LIBS = $(LIBS)'
+
+testsuite: $(LIBOBJ) testsuite.o
+	$(CC) $(CFLAGS) -o testsuite testsuite.o $(LIBOBJ) $(LIBS)
+
+libtalloc.a: $(LIBOBJ)
+	ar -rv $@ $(LIBOBJ)
+	@-ranlib $@
+
+install: all 
+	${INSTALLCMD} -d ${libdir}
+	${INSTALLCMD} -m 755 libtalloc.a $(libdir)
+	${INSTALLCMD} -d ${includedir}
+	${INSTALLCMD} -m 644 $(srcdir)/talloc.h $(includedir)
+	${INSTALLCMD} -m 644 talloc.pc $(libdir)/pkgconfig
+	if [ -f talloc.3 ];then ${INSTALLCMD} -d ${mandir}/man3; fi
+	if [ -f talloc.3 ];then ${INSTALLCMD} -m 644 talloc.3 $(mandir)/man3; fi
+
+doc: talloc.3 talloc.3.html
+
+.3.xml.3:
+	-test -z "$(XSLTPROC)" || $(XSLTPROC) --nonet -o $@ http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+
+.xml.html:
+	-test -z "$(XSLTPROC)" || $(XSLTPROC) --nonet -o $@ http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl $<
+
+clean:
+	rm -f *~ $(LIBOBJ) libtalloc.a testsuite testsuite.o *.gc?? talloc.3 talloc.3.html
+
+test: testsuite
+	./testsuite
+
+gcov:
+	gcov talloc.c
+
+installcheck: 
+	$(MAKE) test
+
+distclean: clean
+	rm -f *~ */*~
+	rm -f Makefile
+	rm -f config.log config.status config.h config.cache
+
+realdistclean: distclean
+	rm -f configure config.h.in
diff --git a/source3/lib/talloc/aclocal.m4 b/source3/lib/talloc/aclocal.m4
new file mode 100644
index 0000000000..5605e476ba
--- /dev/null
+++ b/source3/lib/talloc/aclocal.m4
@@ -0,0 +1 @@
+m4_include(libreplace.m4)
diff --git a/source3/lib/talloc/autogen.sh b/source3/lib/talloc/autogen.sh
new file mode 100755
index 0000000000..bf84eeee19
--- /dev/null
+++ b/source3/lib/talloc/autogen.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+rm -rf autom4te.cache
+rm -f configure config.h.in
+
+IPATHS="-I libreplace -I lib/replace -I ../libreplace -I ../replace"
+autoconf $IPATHS || exit 1
+autoheader $IPATHS || exit 1
+
+rm -rf autom4te.cache
+
+echo "Now run ./configure and then make."
+exit 0
+
diff --git a/source3/lib/talloc/config.guess b/source3/lib/talloc/config.guess
new file mode 100755
index 0000000000..ad5281e66e
--- /dev/null
+++ b/source3/lib/talloc/config.guess
@@ -0,0 +1,1466 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-08-03'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/source3/lib/talloc/config.mk b/source3/lib/talloc/config.mk
new file mode 100644
index 0000000000..3a8a22aa57
--- /dev/null
+++ b/source3/lib/talloc/config.mk
@@ -0,0 +1,14 @@
+################################################
+# Start LIBRARY LIBTALLOC
+[LIBRARY::LIBTALLOC]
+VERSION = 0.0.1
+SO_VERSION = 0
+OBJ_FILES = talloc.o
+MANPAGE = talloc.3
+CFLAGS = -Ilib/talloc
+PUBLIC_HEADERS = talloc.h
+DESCRIPTION = A hierarchical pool based memory system with destructors
+#
+# End LIBRARY LIBTALLOC
+################################################
+
diff --git a/source3/lib/talloc/config.sub b/source3/lib/talloc/config.sub
new file mode 100755
index 0000000000..1c366dfde9
--- /dev/null
+++ b/source3/lib/talloc/config.sub
@@ -0,0 +1,1579 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-07-08'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| ms1 \
+	| msp430 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
+	| msp430-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	m32c-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+        -os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+        -tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+    	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/source3/lib/talloc/configure.ac b/source3/lib/talloc/configure.ac
new file mode 100644
index 0000000000..51e7256bf8
--- /dev/null
+++ b/source3/lib/talloc/configure.ac
@@ -0,0 +1,18 @@
+AC_PREREQ(2.50)
+AC_INIT(talloc.h)
+AC_CONFIG_SRCDIR([talloc.c])
+AC_SUBST(datarootdir)
+AC_CONFIG_HEADER(config.h)
+
+AC_LIBREPLACE_ALL_CHECKS
+
+m4_include(libtalloc.m4)
+
+AC_PATH_PROG(XSLTPROC,xsltproc)
+DOC_TARGET=""
+if test -n "$XSLTPROC"; then
+	DOC_TARGET=doc
+fi
+AC_SUBST(DOC_TARGET)
+
+AC_OUTPUT(Makefile talloc.pc)
diff --git a/source3/lib/talloc/install-sh b/source3/lib/talloc/install-sh
new file mode 100755
index 0000000000..58719246f0
--- /dev/null
+++ b/source3/lib/talloc/install-sh
@@ -0,0 +1,238 @@
+#! /bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/source3/lib/talloc/libtalloc.m4 b/source3/lib/talloc/libtalloc.m4
new file mode 100644
index 0000000000..4a0ee3c8fc
--- /dev/null
+++ b/source3/lib/talloc/libtalloc.m4
@@ -0,0 +1,27 @@
+dnl find the talloc sources. This is meant to work both for 
+dnl talloc standalone builds, and builds of packages using talloc
+tallocdir=""
+tallocpaths="$srcdir $srcdir/lib/talloc $srcdir/talloc $srcdir/../talloc"
+for d in $tallocpaths; do
+	if test -f "$d/talloc.c"; then
+		tallocdir="$d"		
+		AC_SUBST(tallocdir)
+		break;
+	fi
+done
+if test x"$tallocdir" = "x"; then
+   AC_MSG_ERROR([cannot find talloc source in $tallocpaths])
+fi
+TALLOCOBJ="talloc.o"
+AC_SUBST(TALLOCOBJ)
+
+AC_CHECK_SIZEOF(size_t,cross)
+AC_CHECK_SIZEOF(void *,cross)
+
+if test $ac_cv_sizeof_size_t -lt $ac_cv_sizeof_void_p; then
+	AC_WARN([size_t cannot represent the amount of used memory of a process])
+	AC_WARN([please report this to <samba-technical@samba.org>])
+	AC_WARN([sizeof(size_t) = $ac_cv_sizeof_size_t])
+	AC_WARN([sizeof(void *) = $ac_cv_sizeof_void_p])
+	AC_ERROR([sizeof(size_t) < sizeof(void *)])
+fi
diff --git a/source3/lib/talloc/talloc.3.xml b/source3/lib/talloc/talloc.3.xml
new file mode 100644
index 0000000000..2400fef2dc
--- /dev/null
+++ b/source3/lib/talloc/talloc.3.xml
@@ -0,0 +1,718 @@
+<?xml version="1.0"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<refentry>
+  <refmeta>
+    <refentrytitle>talloc</refentrytitle>
+    <manvolnum>3</manvolnum>
+  </refmeta>
+  <refnamediv>
+    <refname>talloc</refname>
+<refpurpose>hierarchical reference counted memory pool system with destructors</refpurpose>
+  </refnamediv>
+  <refsynopsisdiv>
+<synopsis>#include &lt;talloc/talloc.h&gt;</synopsis>
+  </refsynopsisdiv>
+  <refsect1><title>DESCRIPTION</title>
+    <para>
+      If you are used to talloc from Samba3 then please read this
+      carefully, as talloc has changed a lot.
+    </para>
+    <para>
+      The new talloc is a hierarchical, reference counted memory pool
+      system with destructors.	Quite a mouthful really, but not too bad
+      once you get used to it.
+    </para>
+    <para>
+      Perhaps the biggest change from Samba3 is that there is no
+      distinction between a "talloc context" and a "talloc pointer".  Any
+      pointer returned from talloc() is itself a valid talloc context. 
+      This means you can do this:
+    </para>
+    <programlisting>
+    struct foo *X = talloc(mem_ctx, struct foo);
+    X->name = talloc_strdup(X, "foo");
+    </programlisting>
+    <para>
+      and the pointer <literal role="code">X-&gt;name</literal>
+      would be a "child" of the talloc context <literal
+      role="code">X</literal> which is itself a child of
+      <literal role="code">mem_ctx</literal>.  So if you do
+      <literal role="code">talloc_free(mem_ctx)</literal> then
+      it is all destroyed, whereas if you do <literal
+      role="code">talloc_free(X)</literal> then just <literal
+      role="code">X</literal> and <literal
+      role="code">X-&gt;name</literal> are destroyed, and if
+      you do <literal
+      role="code">talloc_free(X-&gt;name)</literal> then just
+      the name element of <literal role="code">X</literal> is
+      destroyed.
+    </para>
+    <para>
+      If you think about this, then what this effectively gives you is an
+      n-ary tree, where you can free any part of the tree with
+      talloc_free().
+    </para>
+    <para>
+      If you find this confusing, then I suggest you run the <literal
+      role="code">testsuite</literal> program to watch talloc
+      in action.  You may also like to add your own tests to <literal
+      role="code">testsuite.c</literal> to clarify how some
+      particular situation is handled.
+    </para>
+  </refsect1>
+  <refsect1><title>TALLOC API</title>
+    <para>
+      The following is a complete guide to the talloc API. Read it all at
+      least twice.
+    </para>
+    <refsect2><title>(type *)talloc(const void *ctx, type);</title>
+        <para>
+	  The talloc() macro is the core of the talloc library.  It takes a
+	  memory <emphasis role="italic">ctx</emphasis> and a <emphasis
+	  role="italic">type</emphasis>, and returns a pointer to a new
+	  area of memory of the given <emphasis
+	  role="italic">type</emphasis>.
+        </para>
+        <para>
+	  The returned pointer is itself a talloc context, so you can use
+	  it as the <emphasis role="italic">ctx</emphasis> argument to more
+	  calls to talloc() if you wish.
+        </para>
+        <para>
+	  The returned pointer is a "child" of the supplied context.  This
+	  means that if you talloc_free() the <emphasis
+	  role="italic">ctx</emphasis> then the new child disappears as
+	  well.  Alternatively you can free just the child.
+        </para>
+        <para>
+	  The <emphasis role="italic">ctx</emphasis> argument to talloc()
+	  can be NULL, in which case a new top level context is created.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_size(const void *ctx, size_t size);</title>
+        <para>
+	  The function talloc_size() should be used when you don't have a
+	  convenient type to pass to talloc().	Unlike talloc(), it is not
+	  type safe (as it returns a void *), so you are on your own for
+	  type checking.
+        </para>
+    </refsect2>
+    <refsect2><title>(typeof(ptr)) talloc_ptrtype(const void *ctx, ptr);</title>
+        <para>
+	  The talloc_ptrtype() macro should be used when you have a pointer and
+	  want to allocate memory to point at with this pointer. When compiling
+	  with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_size()
+	  and talloc_get_name() will return the current location in the source file.
+	  and not the type.
+        </para>
+    </refsect2>
+    <refsect2><title>int talloc_free(void *ptr);</title>
+        <para>
+	  The talloc_free() function frees a piece of talloc memory, and
+	  all its children.  You can call talloc_free() on any pointer
+	  returned by talloc().
+        </para>
+        <para>
+	  The return value of talloc_free() indicates success or failure,
+	  with 0 returned for success and -1 for failure.  The only
+	  possible failure condition is if <emphasis
+	  role="italic">ptr</emphasis> had a destructor attached to it and
+	  the destructor returned -1.  See <link
+	  linkend="talloc_set_destructor"><quote>talloc_set_destructor()</quote></link>
+	  for details on destructors.
+        </para>
+        <para>
+	  If this pointer has an additional parent when talloc_free() is
+	  called then the memory is not actually released, but instead the
+	  most recently established parent is destroyed.  See <link
+	  linkend="talloc_reference"><quote>talloc_reference()</quote></link>
+	  for details on establishing additional parents.
+        </para>
+        <para>
+	  For more control on which parent is removed, see <link
+	  linkend="talloc_unlink"><quote>talloc_unlink()</quote></link>.
+        </para>
+        <para>
+	  talloc_free() operates recursively on its children.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_reference"><title>void *talloc_reference(const void *ctx, const void *ptr);</title>
+        <para>
+	  The talloc_reference() function makes <emphasis
+	  role="italic">ctx</emphasis> an additional parent of <emphasis
+	  role="italic">ptr</emphasis>.
+        </para>
+        <para>
+	  The return value of talloc_reference() is always the original
+	  pointer <emphasis role="italic">ptr</emphasis>, unless talloc ran
+	  out of memory in creating the reference in which case it will
+	  return NULL (each additional reference consumes around 48 bytes
+	  of memory on intel x86 platforms).
+        </para>
+        <para>
+	  If <emphasis role="italic">ptr</emphasis> is NULL, then the
+	  function is a no-op, and simply returns NULL.
+        </para>
+        <para>
+	  After creating a reference you can free it in one of the
+	  following ways:
+        </para>
+      <para>
+        <itemizedlist>
+          <listitem>
+            <para>
+	      you can talloc_free() any parent of the original pointer. 
+	      That will reduce the number of parents of this pointer by 1,
+	      and will cause this pointer to be freed if it runs out of
+	      parents.
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+	      you can talloc_free() the pointer itself.  That will destroy
+	      the most recently established parent to the pointer and leave
+	      the pointer as a child of its current parent.
+            </para>
+          </listitem>
+        </itemizedlist>
+      </para>
+      <para>
+	For more control on which parent to remove, see <link
+	linkend="talloc_unlink"><quote>talloc_unlink()</quote></link>.
+      </para>
+    </refsect2>
+    <refsect2 id="talloc_unlink"><title>int talloc_unlink(const void *ctx, const void *ptr);</title>
+        <para>
+	  The talloc_unlink() function removes a specific parent from
+	  <emphasis role="italic">ptr</emphasis>. The <emphasis
+	  role="italic">ctx</emphasis> passed must either be a context used
+	  in talloc_reference() with this pointer, or must be a direct
+	  parent of ptr.
+        </para>
+        <para>
+	  Note that if the parent has already been removed using
+	  talloc_free() then this function will fail and will return -1. 
+	  Likewise, if <emphasis role="italic">ptr</emphasis> is NULL, then
+	  the function will make no modifications and return -1.
+        </para>
+        <para>
+	  Usually you can just use talloc_free() instead of
+	  talloc_unlink(), but sometimes it is useful to have the
+	  additional control on which parent is removed.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_set_destructor"><title>void talloc_set_destructor(const void *ptr, int (*destructor)(void *));</title>
+        <para>
+	  The function talloc_set_destructor() sets the <emphasis
+	  role="italic">destructor</emphasis> for the pointer <emphasis
+	  role="italic">ptr</emphasis>.  A <emphasis
+	  role="italic">destructor</emphasis> is a function that is called
+	  when the memory used by a pointer is about to be released.  The
+	  destructor receives <emphasis role="italic">ptr</emphasis> as an
+	  argument, and should return 0 for success and -1 for failure.
+        </para>
+        <para>
+	  The <emphasis role="italic">destructor</emphasis> can do anything
+	  it wants to, including freeing other pieces of memory.  A common
+	  use for destructors is to clean up operating system resources
+	  (such as open file descriptors) contained in the structure the
+	  destructor is placed on.
+        </para>
+        <para>
+	  You can only place one destructor on a pointer.  If you need more
+	  than one destructor then you can create a zero-length child of
+	  the pointer and place an additional destructor on that.
+        </para>
+        <para>
+	  To remove a destructor call talloc_set_destructor() with NULL for
+	  the destructor.
+        </para>
+        <para>
+	  If your destructor attempts to talloc_free() the pointer that it
+	  is the destructor for then talloc_free() will return -1 and the
+	  free will be ignored.  This would be a pointless operation
+	  anyway, as the destructor is only called when the memory is just
+	  about to go away.
+        </para>
+    </refsect2>
+    <refsect2><title>int talloc_increase_ref_count(const void *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  The talloc_increase_ref_count(<emphasis
+	  role="italic">ptr</emphasis>) function is exactly equivalent to:
+        </para>
+        <programlisting>talloc_reference(NULL, ptr);</programlisting>
+        <para>
+	  You can use either syntax, depending on which you think is
+	  clearer in your code.
+        </para>
+        <para>
+	  It returns 0 on success and -1 on failure.
+        </para>
+    </refsect2>
+    <refsect2><title>size_t talloc_reference_count(const void *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  Return the number of references to the pointer.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_set_name"><title>void talloc_set_name(const void *ptr, const char *fmt, ...);</title>
+        <para>
+	  Each talloc pointer has a "name".  The name is used principally
+	  for debugging purposes, although it is also possible to set and
+	  get the name on a pointer in as a way of "marking" pointers in
+	  your code.
+        </para>
+        <para>
+	  The main use for names on pointer is for "talloc reports".  See
+	  <link
+	  linkend="talloc_report"><quote>talloc_report_depth_cb()</quote></link>,
+	  <link
+	  linkend="talloc_report"><quote>talloc_report_depth_file()</quote></link>,
+	  <link
+	  linkend="talloc_report"><quote>talloc_report()</quote></link>
+	  <link
+	  linkend="talloc_report"><quote>talloc_report()</quote></link>
+	  and <link
+	  linkend="talloc_report_full"><quote>talloc_report_full()</quote></link>
+	  for details.	Also see <link
+	  linkend="talloc_enable_leak_report"><quote>talloc_enable_leak_report()</quote></link>
+	  and <link
+	  linkend="talloc_enable_leak_report_full"><quote>talloc_enable_leak_report_full()</quote></link>.
+        </para>
+        <para>
+	  The talloc_set_name() function allocates memory as a child of the
+	  pointer.  It is logically equivalent to:
+        </para>
+        <programlisting>talloc_set_name_const(ptr, talloc_asprintf(ptr, fmt, ...));</programlisting>
+        <para>
+	  Note that multiple calls to talloc_set_name() will allocate more
+	  memory without releasing the name.  All of the memory is released
+	  when the ptr is freed using talloc_free().
+        </para>
+    </refsect2>
+    <refsect2><title>void talloc_set_name_const(const void *<emphasis role="italic">ptr</emphasis>, const char *<emphasis role="italic">name</emphasis>);</title>
+        <para>
+	  The function talloc_set_name_const() is just like
+	  talloc_set_name(), but it takes a string constant, and is much
+	  faster.  It is extensively used by the "auto naming" macros, such
+	  as talloc_p().
+        </para>
+        <para>
+	  This function does not allocate any memory.  It just copies the
+	  supplied pointer into the internal representation of the talloc
+	  ptr. This means you must not pass a <emphasis
+	  role="italic">name</emphasis> pointer to memory that will
+	  disappear before <emphasis role="italic">ptr</emphasis> is freed
+	  with talloc_free().
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_named(const void *<emphasis role="italic">ctx</emphasis>, size_t <emphasis role="italic">size</emphasis>, const char *<emphasis role="italic">fmt</emphasis>, ...);</title>
+        <para>
+	  The talloc_named() function creates a named talloc pointer.  It
+	  is equivalent to:
+        </para>
+        <programlisting>ptr = talloc_size(ctx, size);
+talloc_set_name(ptr, fmt, ....);</programlisting>
+    </refsect2>
+    <refsect2><title>void *talloc_named_const(const void *<emphasis role="italic">ctx</emphasis>, size_t <emphasis role="italic">size</emphasis>, const char *<emphasis role="italic">name</emphasis>);</title>
+        <para>
+	  This is equivalent to:
+        </para>
+        <programlisting>ptr = talloc_size(ctx, size);
+talloc_set_name_const(ptr, name);</programlisting>
+    </refsect2>
+    <refsect2><title>const char *talloc_get_name(const void *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  This returns the current name for the given talloc pointer,
+	  <emphasis role="italic">ptr</emphasis>. See <link
+	  linkend="talloc_set_name"><quote>talloc_set_name()</quote></link>
+	  for details.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_init(const char *<emphasis role="italic">fmt</emphasis>, ...);</title>
+        <para>
+	  This function creates a zero length named talloc context as a top
+	  level context.  It is equivalent to:
+        </para>
+        <programlisting>talloc_named(NULL, 0, fmt, ...);</programlisting>
+    </refsect2>
+    <refsect2><title>void *talloc_new(void *<emphasis role="italic">ctx</emphasis>);</title>
+        <para>
+	  This is a utility macro that creates a new memory context hanging
+	  off an exiting context, automatically naming it "talloc_new:
+	  __location__" where __location__ is the source line it is called
+	  from.  It is particularly useful for creating a new temporary
+	  working context.
+        </para>
+    </refsect2>
+    <refsect2><title>(<emphasis role="italic">type</emphasis> *)talloc_realloc(const void *<emphasis role="italic">ctx</emphasis>, void *<emphasis role="italic">ptr</emphasis>, <emphasis role="italic">type</emphasis>, <emphasis role="italic">count</emphasis>);</title>
+        <para>
+	  The talloc_realloc() macro changes the size of a talloc pointer. 
+	  It has the following equivalences:
+        </para>
+        <programlisting>talloc_realloc(ctx, NULL, type, 1) ==> talloc(ctx, type);
+talloc_realloc(ctx, ptr, type, 0)  ==> talloc_free(ptr);</programlisting>
+        <para>
+	  The <emphasis role="italic">ctx</emphasis> argument is only used
+	  if <emphasis role="italic">ptr</emphasis> is not NULL, otherwise
+	  it is ignored.
+        </para>
+        <para>
+	  talloc_realloc() returns the new pointer, or NULL on failure. 
+	  The call will fail either due to a lack of memory, or because the
+	  pointer has more than one parent (see <link
+	  linkend="talloc_reference"><quote>talloc_reference()</quote></link>).
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_realloc_size(const void *ctx, void *ptr, size_t size);</title>
+        <para>
+	  the talloc_realloc_size() function is useful when the type is not
+	  known so the type-safe talloc_realloc() cannot be used.
+        </para>
+    </refsect2>
+    <refsect2><title>TYPE *talloc_steal(const void *<emphasis role="italic">new_ctx</emphasis>, const TYPE *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  The talloc_steal() function changes the parent context of a
+	  talloc pointer.  It is typically used when the context that the
+	  pointer is currently a child of is going to be freed and you wish
+	  to keep the memory for a longer time.
+        </para>
+        <para>
+	  The talloc_steal() function returns the pointer that you pass it.
+	   It does not have any failure modes.
+        </para>
+        <para>
+	  NOTE: It is possible to produce loops in the parent/child
+	  relationship if you are not careful with talloc_steal().  No
+	  guarantees are provided as to your sanity or the safety of your
+	  data if you do this.
+        </para>
+    </refsect2>
+    <refsect2><title>TYPE *talloc_move(const void *<emphasis role="italic">new_ctx</emphasis>, TYPE **<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  The talloc_move() function is a wrapper around
+	  talloc_steal() which zeros the source pointer after the
+	  move. This avoids a potential source of bugs where a
+	  programmer leaves a pointer in two structures, and uses the
+	  pointer from the old structure after it has been moved to a
+	  new one.
+        </para>
+    </refsect2>
+    <refsect2><title>size_t talloc_total_size(const void *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  The talloc_total_size() function returns the total size in bytes
+	  used by this pointer and all child pointers.	Mostly useful for
+	  debugging.
+        </para>
+        <para>
+	  Passing NULL is allowed, but it will only give a meaningful
+	  result if talloc_enable_leak_report() or
+	  talloc_enable_leak_report_full() has been called.
+        </para>
+    </refsect2>
+    <refsect2><title>size_t talloc_total_blocks(const void *<emphasis role="italic">ptr</emphasis>);</title>
+        <para>
+	  The talloc_total_blocks() function returns the total memory block
+	  count used by this pointer and all child pointers.  Mostly useful
+	  for debugging.
+        </para>
+        <para>
+	  Passing NULL is allowed, but it will only give a meaningful
+	  result if talloc_enable_leak_report() or
+	  talloc_enable_leak_report_full() has been called.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_report"><title>void talloc_report(const void *ptr, FILE *f);</title>
+        <para>
+	  The talloc_report() function prints a summary report of all
+	  memory used by <emphasis role="italic">ptr</emphasis>.  One line
+	  of report is printed for each immediate child of ptr, showing the
+	  total memory and number of blocks used by that child.
+        </para>
+        <para>
+	  You can pass NULL for the pointer, in which case a report is
+	  printed for the top level memory context, but only if
+	  talloc_enable_leak_report() or talloc_enable_leak_report_full()
+	  has been called.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_report_full"><title>void talloc_report_full(const void *<emphasis role="italic">ptr</emphasis>, FILE *<emphasis role="italic">f</emphasis>);</title>
+        <para>
+	  This provides a more detailed report than talloc_report().  It
+	  will recursively print the entire tree of memory referenced by
+	  the pointer. References in the tree are shown by giving the name
+	  of the pointer that is referenced.
+        </para>
+        <para>
+	  You can pass NULL for the pointer, in which case a report is
+	  printed for the top level memory context, but only if
+	  talloc_enable_leak_report() or talloc_enable_leak_report_full()
+	  has been called.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_report_depth_cb">
+     <funcsynopsis><funcprototype>
+      <funcdef>void <function>talloc_report_depth_cb</function></funcdef>
+      <paramdef><parameter>const void *ptr</parameter></paramdef>
+      <paramdef><parameter>int depth</parameter></paramdef>
+      <paramdef><parameter>int max_depth</parameter></paramdef>
+      <paramdef><parameter>void (*callback)(const void *ptr, int depth, int max_depth, int is_ref, void *priv)</parameter></paramdef>
+      <paramdef><parameter>void *priv</parameter></paramdef>
+     </funcprototype></funcsynopsis>
+        <para>
+	  This provides a more flexible reports than talloc_report(). It
+	  will recursively call the callback for the entire tree of memory
+	  referenced by the pointer. References in the tree are passed with
+	  <emphasis role="italic">is_ref = 1</emphasis> and the pointer that is referenced.
+        </para>
+        <para>
+	  You can pass NULL for the pointer, in which case a report is
+	  printed for the top level memory context, but only if
+	  talloc_enable_leak_report() or talloc_enable_leak_report_full()
+	  has been called.
+        </para>
+        <para>
+	  The recursion is stopped when depth >= max_depth.
+	  max_depth = -1 means only stop at leaf nodes.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_report_depth_file">
+     <funcsynopsis><funcprototype>
+      <funcdef>void <function>talloc_report_depth_file</function></funcdef>
+      <paramdef><parameter>const void *ptr</parameter></paramdef>
+      <paramdef><parameter>int depth</parameter></paramdef>
+      <paramdef><parameter>int max_depth</parameter></paramdef>
+      <paramdef><parameter>FILE *f</parameter></paramdef>
+     </funcprototype></funcsynopsis>
+        <para>
+	  This provides a more flexible reports than talloc_report(). It
+	  will let you specify the depth and max_depth.
+        </para>
+    </refsect2>
+    <refsect2 id="talloc_enable_leak_report"><title>void talloc_enable_leak_report(void);</title>
+        <para>
+	  This enables calling of talloc_report(NULL, stderr) when the
+	  program exits.  In Samba4 this is enabled by using the
+	  --leak-report command line option.
+        </para>
+        <para>
+	  For it to be useful, this function must be called before any
+	  other talloc function as it establishes a "null context" that
+	  acts as the top of the tree.	If you don't call this function
+	  first then passing NULL to talloc_report() or
+	  talloc_report_full() won't give you the full tree printout.
+        </para>
+        <para>
+	  Here is a typical talloc report:
+        </para>
+        <screen format="linespecific">talloc report on 'null_context' (total 267 bytes in 15 blocks)
+libcli/auth/spnego_parse.c:55  contains   31 bytes in   2 blocks
+libcli/auth/spnego_parse.c:55  contains   31 bytes in   2 blocks
+iconv(UTF8,CP850)              contains   42 bytes in   2 blocks
+libcli/auth/spnego_parse.c:55  contains   31 bytes in   2 blocks
+iconv(CP850,UTF8)              contains   42 bytes in   2 blocks
+iconv(UTF8,UTF-16LE)           contains   45 bytes in   2 blocks
+iconv(UTF-16LE,UTF8)           contains   45 bytes in   2 blocks
+      </screen>
+    </refsect2>
+    <refsect2 id="talloc_enable_leak_report_full"><title>void talloc_enable_leak_report_full(void);</title>
+        <para>
+	  This enables calling of talloc_report_full(NULL, stderr) when the
+	  program exits.  In Samba4 this is enabled by using the
+	  --leak-report-full command line option.
+        </para>
+        <para>
+	  For it to be useful, this function must be called before any
+	  other talloc function as it establishes a "null context" that
+	  acts as the top of the tree.	If you don't call this function
+	  first then passing NULL to talloc_report() or
+	  talloc_report_full() won't give you the full tree printout.
+        </para>
+        <para>
+	  Here is a typical full report:
+        </para>
+        <screen format="linespecific">full talloc report on 'root' (total 18 bytes in 8 blocks)
+p1               contains     18 bytes in   7 blocks (ref 0)
+    r1               contains     13 bytes in   2 blocks (ref 0)
+        reference to: p2
+    p2               contains      1 bytes in   1 blocks (ref 1)
+    x3               contains      1 bytes in   1 blocks (ref 0)
+    x2               contains      1 bytes in   1 blocks (ref 0)
+    x1               contains      1 bytes in   1 blocks (ref 0)
+      </screen>
+    </refsect2>
+    <refsect2><title>(<emphasis role="italic">type</emphasis> *)talloc_zero(const void *<emphasis role="italic">ctx</emphasis>, <emphasis role="italic">type</emphasis>);</title>
+        <para>
+	  The talloc_zero() macro is equivalent to:
+        </para>
+        <programlisting>ptr = talloc(ctx, type);
+if (ptr) memset(ptr, 0, sizeof(type));</programlisting>
+    </refsect2>
+    <refsect2><title>void *talloc_zero_size(const void *<emphasis role="italic">ctx</emphasis>, size_t <emphasis role="italic">size</emphasis>)</title>
+        <para>
+	  The talloc_zero_size() function is useful when you don't have a
+	  known type.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_memdup(const void *<emphasis role="italic">ctx</emphasis>, const void *<emphasis role="italic">p</emphasis>, size_t size);</title>
+        <para>
+	  The talloc_memdup() function is equivalent to:
+        </para>
+        <programlisting>ptr = talloc_size(ctx, size);
+if (ptr) memcpy(ptr, p, size);</programlisting>
+    </refsect2>
+    <refsect2><title>char *talloc_strdup(const void *<emphasis role="italic">ctx</emphasis>, const char *<emphasis role="italic">p</emphasis>);</title>
+        <para>
+	  The talloc_strdup() function is equivalent to:
+        </para>
+        <programlisting>ptr = talloc_size(ctx, strlen(p)+1);
+if (ptr) memcpy(ptr, p, strlen(p)+1);</programlisting>
+        <para>
+	  This function sets the name of the new pointer to the passed
+	  string. This is equivalent to:
+        </para>
+        <programlisting>talloc_set_name_const(ptr, ptr)</programlisting>
+    </refsect2>
+    <refsect2><title>char *talloc_strndup(const void *<emphasis role="italic">t</emphasis>, const char *<emphasis role="italic">p</emphasis>, size_t <emphasis role="italic">n</emphasis>);</title>
+        <para>
+	  The talloc_strndup() function is the talloc equivalent of the C
+	  library function strndup(3).
+        </para>
+        <para>
+	  This function sets the name of the new pointer to the passed
+	  string. This is equivalent to:
+        </para>
+        <programlisting>talloc_set_name_const(ptr, ptr)</programlisting>
+    </refsect2>
+    <refsect2><title>char *talloc_vasprintf(const void *<emphasis role="italic">t</emphasis>, const char *<emphasis role="italic">fmt</emphasis>, va_list <emphasis role="italic">ap</emphasis>);</title>
+        <para>
+	  The talloc_vasprintf() function is the talloc equivalent of the C
+	  library function vasprintf(3).
+        </para>
+    </refsect2>
+    <refsect2><title>char *talloc_asprintf(const void *<emphasis role="italic">t</emphasis>, const char *<emphasis role="italic">fmt</emphasis>, ...);</title>
+        <para>
+	  The talloc_asprintf() function is the talloc equivalent of the C
+	  library function asprintf(3).
+        </para>
+        <para>
+	  This function sets the name of the new pointer to the passed
+	  string. This is equivalent to:
+        </para>
+        <programlisting>talloc_set_name_const(ptr, ptr)</programlisting>
+    </refsect2>
+    <refsect2><title>char *talloc_asprintf_append(char *s, const char *fmt, ...);</title>
+        <para>
+	  The talloc_asprintf_append() function appends the given formatted
+	  string to the given string.
+        </para>
+    </refsect2>
+    <refsect2><title>(type *)talloc_array(const void *ctx, type, uint_t count);</title>
+        <para>
+	  The talloc_array() macro is equivalent to:
+        </para>
+        <programlisting>(type *)talloc_size(ctx, sizeof(type) * count);</programlisting>
+        <para>
+	  except that it provides integer overflow protection for the
+	  multiply, returning NULL if the multiply overflows.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_array_size(const void *ctx, size_t size, uint_t count);</title>
+        <para>
+	  The talloc_array_size() function is useful when the type is not
+	  known. It operates in the same way as talloc_array(), but takes a
+	  size instead of a type.
+        </para>
+    </refsect2>
+    <refsect2><title>(typeof(ptr)) talloc_array_ptrtype(const void *ctx, ptr, uint_t count);</title>
+        <para>
+	  The talloc_ptrtype() macro should be used when you have a pointer to an array
+	  and want to allocate memory of an array to point at with this pointer. When compiling
+	  with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_array_size()
+	  and talloc_get_name() will return the current location in the source file.
+	  and not the type.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_realloc_fn(const void *ctx, void *ptr, size_t size)</title>
+        <para>
+	  This is a non-macro version of talloc_realloc(), which is useful
+	  as libraries sometimes want a realloc function pointer.  A
+	  realloc(3) implementation encapsulates the functionality of
+	  malloc(3), free(3) and realloc(3) in one call, which is why it is
+	  useful to be able to pass around a single function pointer.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_autofree_context(void);</title>
+        <para>
+	  This is a handy utility function that returns a talloc context
+	  which will be automatically freed on program exit.  This can be
+	  used to reduce the noise in memory leak reports.
+        </para>
+    </refsect2>
+    <refsect2><title>void *talloc_check_name(const void *ptr, const char *name);</title>
+        <para>
+	  This function checks if a pointer has the specified <emphasis
+	  role="italic">name</emphasis>.  If it does then the pointer is
+	  returned.  It it doesn't then NULL is returned.
+        </para>
+    </refsect2>
+    <refsect2><title>(type *)talloc_get_type(const void *ptr, type);</title>
+        <para>
+	  This macro allows you to do type checking on talloc pointers.  It
+	  is particularly useful for void* private pointers.  It is
+	  equivalent to this:
+        </para>
+        <programlisting>(type *)talloc_check_name(ptr, #type)</programlisting>
+    </refsect2>
+    <refsect2><title>talloc_set_type(const void *ptr, type);</title>
+        <para>
+	  This macro allows you to force the name of a pointer to be a
+	  particular <emphasis>type</emphasis>.  This can be
+	  used in conjunction with talloc_get_type() to do type checking on
+	  void* pointers.
+        </para>
+        <para>
+	  It is equivalent to this:
+        </para>
+        <programlisting>talloc_set_name_const(ptr, #type)</programlisting>
+    </refsect2>
+  </refsect1>
+  <refsect1><title>PERFORMANCE</title>
+    <para>
+      All the additional features of talloc(3) over malloc(3) do come at a
+      price.  We have a simple performance test in Samba4 that measures
+      talloc() versus malloc() performance, and it seems that talloc() is
+      about 10% slower than malloc() on my x86 Debian Linux box.  For
+      Samba, the great reduction in code complexity that we get by using
+      talloc makes this worthwhile, especially as the total overhead of
+      talloc/malloc in Samba is already quite small.
+    </para>
+  </refsect1>
+  <refsect1><title>SEE ALSO</title>
+    <para>
+      malloc(3), strndup(3), vasprintf(3), asprintf(3), 
+      <ulink url="http://talloc.samba.org/"/>
+    </para>
+  </refsect1>
+  <refsect1><title>COPYRIGHT/LICENSE</title>
+    <para>
+      Copyright (C) Andrew Tridgell 2004
+    </para>
+    <para>
+      This program is free software; you can redistribute it and/or modify
+      it under the terms of the GNU General Public License as published by
+      the Free Software Foundation; either version 2 of the License, or (at
+      your option) any later version.
+    </para>
+    <para>
+      This program is distributed in the hope that it will be useful, but
+      WITHOUT ANY WARRANTY; without even the implied warranty of
+      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+      General Public License for more details.
+    </para>
+    <para>
+      You should have received a copy of the GNU General Public License
+      along with this program; if not, write to the Free Software
+      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    </para>
+  </refsect1>
+</refentry>
diff --git a/source3/lib/talloc.c b/source3/lib/talloc/talloc.c
index 43c95a86e5..d790c6c26b 100644
--- a/source3/lib/talloc.c
+++ b/source3/lib/talloc/talloc.c
@@ -48,24 +48,7 @@
 #endif /* _SAMBA_BUILD_ */
 
 #ifndef _TALLOC_SAMBA3
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-
-#if defined(HAVE_STDARG_H)
-#include <stdarg.h>
-#elif defined (HAVE_VARARGS_H)
-#include <varargs.h>
-#else
-#error "no var arg header"
-#endif
-
+#include "replace.h"
 #include "talloc.h"
 #endif /* not _TALLOC_SAMBA3 */
 
@@ -755,6 +738,18 @@ void *_talloc_steal(const void *new_ctx, const void *ptr)
 }
 
 /*
+  a wrapper around talloc_steal() for situations where you are moving a pointer
+  between two structures, and want the old pointer to be set to NULL
+*/
+void *_talloc_move(const void *new_ctx, const void *_pptr)
+{
+	const void **pptr = (const void **)_pptr;
+	void *ret = _talloc_steal(new_ctx, *pptr);
+	(*pptr) = NULL;
+	return ret;
+}
+
+/*
   return the total size of a talloc pool (subtree)
 */
 size_t talloc_total_size(const void *ptr)
diff --git a/source3/include/talloc.h b/source3/lib/talloc/talloc.h
index fdc0fd3494..8b17eec03a 100644
--- a/source3/include/talloc.h
+++ b/source3/lib/talloc/talloc.h
@@ -65,15 +65,16 @@ typedef void TALLOC_CTX;
 /* this extremely strange macro is to avoid some braindamaged warning
    stupidity in gcc 4.1.x */
 #define talloc_steal(ctx, ptr) ({ _TALLOC_TYPEOF(ptr) __talloc_steal_ret = (_TALLOC_TYPEOF(ptr))_talloc_steal((ctx),(ptr)); __talloc_steal_ret; })
-#define talloc_reference(ctx, ptr) (_TALLOC_TYPEOF(ptr))_talloc_reference((ctx),(ptr))
 #else
 #define talloc_set_destructor(ptr, function) \
 	_talloc_set_destructor((ptr), (int (*)(void *))(function))
 #define _TALLOC_TYPEOF(ptr) void *
 #define talloc_steal(ctx, ptr) (_TALLOC_TYPEOF(ptr))_talloc_steal((ctx),(ptr))
-#define talloc_reference(ctx, ptr) (_TALLOC_TYPEOF(ptr))_talloc_reference((ctx),(ptr))
 #endif
 
+#define talloc_reference(ctx, ptr) (_TALLOC_TYPEOF(ptr))_talloc_reference((ctx),(ptr))
+#define talloc_move(ctx, ptr) (_TALLOC_TYPEOF(*(ptr)))_talloc_move((ctx),(void *)(ptr))
+
 /* useful macros for creating type checked pointers */
 #define talloc(ctx, type) (type *)talloc_named_const(ctx, sizeof(type), #type)
 #define talloc_size(ctx, size) talloc_named_const(ctx, size, __location__)
@@ -127,6 +128,7 @@ int talloc_free(void *ptr);
 void talloc_free_children(void *ptr);
 void *_talloc_realloc(const void *context, void *ptr, size_t size, const char *name);
 void *_talloc_steal(const void *new_ctx, const void *ptr);
+void *_talloc_move(const void *new_ctx, const void *pptr);
 size_t talloc_total_size(const void *ptr);
 size_t talloc_total_blocks(const void *ptr);
 void talloc_report_depth_cb(const void *ptr, int depth, int max_depth,
diff --git a/source3/lib/talloc/talloc.pc.in b/source3/lib/talloc/talloc.pc.in
new file mode 100644
index 0000000000..7f9ef754cb
--- /dev/null
+++ b/source3/lib/talloc/talloc.pc.in
@@ -0,0 +1,10 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: talloc 
+Description: A hierarchical pool based memory system with destructors
+Version: 4.0
+Libs: @LIBS@ -L${libdir} -ltalloc
+Cflags: -I${includedir} @CFLAGS@
diff --git a/source3/lib/talloc/talloc_guide.txt b/source3/lib/talloc/talloc_guide.txt
new file mode 100644
index 0000000000..83f524862f
--- /dev/null
+++ b/source3/lib/talloc/talloc_guide.txt
@@ -0,0 +1,637 @@
+Using talloc in Samba4
+----------------------
+
+Andrew Tridgell
+September 2004
+
+The most current version of this document is available at
+   http://samba.org/ftp/unpacked/samba4/source/lib/talloc/talloc_guide.txt
+
+If you are used to the "old" talloc from Samba3 before 3.0.20 then please read
+this carefully, as talloc has changed a lot. With 3.0.20 (or 3.0.14?) the
+Samba4 talloc has been ported back to Samba3, so this guide applies to both.
+
+The new talloc is a hierarchical, reference counted memory pool system
+with destructors. Quite a mounthful really, but not too bad once you
+get used to it.
+
+Perhaps the biggest change from Samba3 is that there is no distinction
+between a "talloc context" and a "talloc pointer". Any pointer
+returned from talloc() is itself a valid talloc context. This means
+you can do this:
+
+  struct foo *X = talloc(mem_ctx, struct foo);
+  X->name = talloc_strdup(X, "foo");
+
+and the pointer X->name would be a "child" of the talloc context "X"
+which is itself a child of mem_ctx. So if you do talloc_free(mem_ctx)
+then it is all destroyed, whereas if you do talloc_free(X) then just X
+and X->name are destroyed, and if you do talloc_free(X->name) then
+just the name element of X is destroyed.
+
+If you think about this, then what this effectively gives you is an
+n-ary tree, where you can free any part of the tree with
+talloc_free().
+
+If you find this confusing, then I suggest you run the testsuite to
+watch talloc in action. You may also like to add your own tests to
+testsuite.c to clarify how some particular situation is handled.
+
+
+Performance
+-----------
+
+All the additional features of talloc() over malloc() do come at a
+price. We have a simple performance test in Samba4 that measures
+talloc() versus malloc() performance, and it seems that talloc() is
+about 4% slower than malloc() on my x86 Debian Linux box. For Samba,
+the great reduction in code complexity that we get by using talloc
+makes this worthwhile, especially as the total overhead of
+talloc/malloc in Samba is already quite small.
+
+
+talloc API
+----------
+
+The following is a complete guide to the talloc API. Read it all at
+least twice.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc(const void *context, type);
+
+The talloc() macro is the core of the talloc library. It takes a
+memory context and a type, and returns a pointer to a new area of
+memory of the given type.
+
+The returned pointer is itself a talloc context, so you can use it as
+the context argument to more calls to talloc if you wish.
+
+The returned pointer is a "child" of the supplied context. This means
+that if you talloc_free() the context then the new child disappears as
+well. Alternatively you can free just the child.
+
+The context argument to talloc() can be NULL, in which case a new top
+level context is created. 
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_size(const void *context, size_t size);
+
+The function talloc_size() should be used when you don't have a
+convenient type to pass to talloc(). Unlike talloc(), it is not type
+safe (as it returns a void *), so you are on your own for type checking.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(typeof(ptr)) talloc_ptrtype(const void *ctx, ptr);
+
+The talloc_ptrtype() macro should be used when you have a pointer and
+want to allocate memory to point at with this pointer. When compiling
+with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_size()
+and talloc_get_name() will return the current location in the source file.
+and not the type.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+int talloc_free(void *ptr);
+
+The talloc_free() function frees a piece of talloc memory, and all its
+children. You can call talloc_free() on any pointer returned by
+talloc().
+
+The return value of talloc_free() indicates success or failure, with 0
+returned for success and -1 for failure. The only possible failure
+condition is if the pointer had a destructor attached to it and the
+destructor returned -1. See talloc_set_destructor() for details on
+destructors.
+
+If this pointer has an additional parent when talloc_free() is called
+then the memory is not actually released, but instead the most
+recently established parent is destroyed. See talloc_reference() for
+details on establishing additional parents.
+
+For more control on which parent is removed, see talloc_unlink()
+
+talloc_free() operates recursively on its children.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+int talloc_free_children(void *ptr);
+
+The talloc_free_children() walks along the list of all children of a
+talloc context and talloc_free()s only the children, not the context
+itself.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_reference(const void *context, const void *ptr);
+
+The talloc_reference() function makes "context" an additional parent
+of "ptr".
+
+The return value of talloc_reference() is always the original pointer
+"ptr", unless talloc ran out of memory in creating the reference in
+which case it will return NULL (each additional reference consumes
+around 48 bytes of memory on intel x86 platforms).
+
+If "ptr" is NULL, then the function is a no-op, and simply returns NULL.
+
+After creating a reference you can free it in one of the following
+ways:
+
+  - you can talloc_free() any parent of the original pointer. That
+    will reduce the number of parents of this pointer by 1, and will
+    cause this pointer to be freed if it runs out of parents.
+
+  - you can talloc_free() the pointer itself. That will destroy the
+    most recently established parent to the pointer and leave the
+    pointer as a child of its current parent.
+
+For more control on which parent to remove, see talloc_unlink()
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+int talloc_unlink(const void *context, const void *ptr);
+
+The talloc_unlink() function removes a specific parent from ptr. The
+context passed must either be a context used in talloc_reference()
+with this pointer, or must be a direct parent of ptr. 
+
+Note that if the parent has already been removed using talloc_free()
+then this function will fail and will return -1.  Likewise, if "ptr"
+is NULL, then the function will make no modifications and return -1.
+
+Usually you can just use talloc_free() instead of talloc_unlink(), but
+sometimes it is useful to have the additional control on which parent
+is removed.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_set_destructor(const void *ptr, int (*destructor)(void *));
+
+The function talloc_set_destructor() sets the "destructor" for the
+pointer "ptr". A destructor is a function that is called when the
+memory used by a pointer is about to be released. The destructor
+receives the pointer as an argument, and should return 0 for success
+and -1 for failure.
+
+The destructor can do anything it wants to, including freeing other
+pieces of memory. A common use for destructors is to clean up
+operating system resources (such as open file descriptors) contained
+in the structure the destructor is placed on.
+
+You can only place one destructor on a pointer. If you need more than
+one destructor then you can create a zero-length child of the pointer
+and place an additional destructor on that.
+
+To remove a destructor call talloc_set_destructor() with NULL for the
+destructor.
+
+If your destructor attempts to talloc_free() the pointer that it is
+the destructor for then talloc_free() will return -1 and the free will
+be ignored. This would be a pointless operation anyway, as the
+destructor is only called when the memory is just about to go away.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+int talloc_increase_ref_count(const void *ptr);
+
+The talloc_increase_ref_count(ptr) function is exactly equivalent to:
+
+  talloc_reference(NULL, ptr);
+
+You can use either syntax, depending on which you think is clearer in
+your code.
+
+It returns 0 on success and -1 on failure.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+size_t talloc_reference_count(const void *ptr);
+
+Return the number of references to the pointer.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_set_name(const void *ptr, const char *fmt, ...);
+
+Each talloc pointer has a "name". The name is used principally for
+debugging purposes, although it is also possible to set and get the
+name on a pointer in as a way of "marking" pointers in your code.
+
+The main use for names on pointer is for "talloc reports". See
+talloc_report() and talloc_report_full() for details. Also see
+talloc_enable_leak_report() and talloc_enable_leak_report_full().
+
+The talloc_set_name() function allocates memory as a child of the
+pointer. It is logically equivalent to:
+  talloc_set_name_const(ptr, talloc_asprintf(ptr, fmt, ...));
+
+Note that multiple calls to talloc_set_name() will allocate more
+memory without releasing the name. All of the memory is released when
+the ptr is freed using talloc_free().
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_set_name_const(const void *ptr, const char *name);
+
+The function talloc_set_name_const() is just like talloc_set_name(),
+but it takes a string constant, and is much faster. It is extensively
+used by the "auto naming" macros, such as talloc_p().
+
+This function does not allocate any memory. It just copies the
+supplied pointer into the internal representation of the talloc
+ptr. This means you must not pass a name pointer to memory that will
+disappear before the ptr is freed with talloc_free().
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_named(const void *context, size_t size, const char *fmt, ...);
+
+The talloc_named() function creates a named talloc pointer. It is
+equivalent to:
+
+   ptr = talloc_size(context, size);
+   talloc_set_name(ptr, fmt, ....);
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_named_const(const void *context, size_t size, const char *name);
+
+This is equivalent to:
+
+   ptr = talloc_size(context, size);
+   talloc_set_name_const(ptr, name);
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+const char *talloc_get_name(const void *ptr);
+
+This returns the current name for the given talloc pointer. See
+talloc_set_name() for details.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_init(const char *fmt, ...);
+
+This function creates a zero length named talloc context as a top
+level context. It is equivalent to:
+
+  talloc_named(NULL, 0, fmt, ...);
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_new(void *ctx);
+
+This is a utility macro that creates a new memory context hanging
+off an exiting context, automatically naming it "talloc_new: __location__"
+where __location__ is the source line it is called from. It is
+particularly useful for creating a new temporary working context.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc_realloc(const void *context, void *ptr, type, count);
+
+The talloc_realloc() macro changes the size of a talloc
+pointer. The "count" argument is the number of elements of type "type"
+that you want the resulting pointer to hold. 
+
+talloc_realloc() has the following equivalences:
+
+  talloc_realloc(context, NULL, type, 1) ==> talloc(context, type);
+  talloc_realloc(context, NULL, type, N) ==> talloc_array(context, type, N);
+  talloc_realloc(context, ptr, type, 0)  ==> talloc_free(ptr);
+
+The "context" argument is only used if "ptr" is NULL, otherwise it is
+ignored.
+
+talloc_realloc() returns the new pointer, or NULL on failure. The call
+will fail either due to a lack of memory, or because the pointer has
+more than one parent (see talloc_reference()).
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_realloc_size(const void *context, void *ptr, size_t size);
+
+the talloc_realloc_size() function is useful when the type is not 
+known so the typesafe talloc_realloc() cannot be used.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_steal(const void *new_ctx, const void *ptr);
+
+The talloc_steal() function changes the parent context of a talloc
+pointer. It is typically used when the context that the pointer is
+currently a child of is going to be freed and you wish to keep the
+memory for a longer time. 
+
+The talloc_steal() function returns the pointer that you pass it. It
+does not have any failure modes.
+
+NOTE: It is possible to produce loops in the parent/child relationship
+if you are not careful with talloc_steal(). No guarantees are provided
+as to your sanity or the safety of your data if you do this.
+
+talloc_steal (new_ctx, NULL) will return NULL with no sideeffects.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+size_t talloc_total_size(const void *ptr);
+
+The talloc_total_size() function returns the total size in bytes used
+by this pointer and all child pointers. Mostly useful for debugging.
+
+Passing NULL is allowed, but it will only give a meaningful result if
+talloc_enable_leak_report() or talloc_enable_leak_report_full() has
+been called.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+size_t talloc_total_blocks(const void *ptr);
+
+The talloc_total_blocks() function returns the total memory block
+count used by this pointer and all child pointers. Mostly useful for
+debugging.
+
+Passing NULL is allowed, but it will only give a meaningful result if
+talloc_enable_leak_report() or talloc_enable_leak_report_full() has
+been called.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_report_depth_cb(const void *ptr, int depth, int max_depth,
+			    void (*callback)(const void *ptr,
+			    		     int depth, int max_depth,
+					     int is_ref,
+					     void *priv),
+			    void *priv);
+
+This provides a more flexible reports than talloc_report(). It
+will recursively call the callback for the entire tree of memory
+referenced by the pointer. References in the tree are passed with
+is_ref = 1 and the pointer that is referenced.
+
+You can pass NULL for the pointer, in which case a report is
+printed for the top level memory context, but only if
+talloc_enable_leak_report() or talloc_enable_leak_report_full()
+has been called.
+
+The recursion is stopped when depth >= max_depth.
+max_depth = -1 means only stop at leaf nodes.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_report_depth_file(const void *ptr, int depth, int max_depth, FILE *f);
+
+This provides a more flexible reports than talloc_report(). It
+will let you specify the depth and max_depth.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_report(const void *ptr, FILE *f);
+
+The talloc_report() function prints a summary report of all memory
+used by ptr. One line of report is printed for each immediate child of
+ptr, showing the total memory and number of blocks used by that child.
+
+You can pass NULL for the pointer, in which case a report is printed
+for the top level memory context, but only if
+talloc_enable_leak_report() or talloc_enable_leak_report_full() has
+been called.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_report_full(const void *ptr, FILE *f);
+
+This provides a more detailed report than talloc_report(). It will
+recursively print the ensire tree of memory referenced by the
+pointer. References in the tree are shown by giving the name of the
+pointer that is referenced.
+
+You can pass NULL for the pointer, in which case a report is printed
+for the top level memory context, but only if
+talloc_enable_leak_report() or talloc_enable_leak_report_full() has
+been called.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_enable_leak_report(void);
+
+This enables calling of talloc_report(NULL, stderr) when the program
+exits. In Samba4 this is enabled by using the --leak-report command
+line option.
+
+For it to be useful, this function must be called before any other
+talloc function as it establishes a "null context" that acts as the
+top of the tree. If you don't call this function first then passing
+NULL to talloc_report() or talloc_report_full() won't give you the
+full tree printout.
+
+Here is a typical talloc report:
+
+talloc report on 'null_context' (total 267 bytes in 15 blocks)
+        libcli/auth/spnego_parse.c:55  contains     31 bytes in   2 blocks
+        libcli/auth/spnego_parse.c:55  contains     31 bytes in   2 blocks
+        iconv(UTF8,CP850)              contains     42 bytes in   2 blocks
+        libcli/auth/spnego_parse.c:55  contains     31 bytes in   2 blocks
+        iconv(CP850,UTF8)              contains     42 bytes in   2 blocks
+        iconv(UTF8,UTF-16LE)           contains     45 bytes in   2 blocks
+        iconv(UTF-16LE,UTF8)           contains     45 bytes in   2 blocks
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_enable_leak_report_full(void);
+
+This enables calling of talloc_report_full(NULL, stderr) when the
+program exits. In Samba4 this is enabled by using the
+--leak-report-full command line option.
+
+For it to be useful, this function must be called before any other
+talloc function as it establishes a "null context" that acts as the
+top of the tree. If you don't call this function first then passing
+NULL to talloc_report() or talloc_report_full() won't give you the
+full tree printout.
+
+Here is a typical full report:
+
+full talloc report on 'root' (total 18 bytes in 8 blocks)
+    p1                             contains     18 bytes in   7 blocks (ref 0)
+        r1                             contains     13 bytes in   2 blocks (ref 0)
+            reference to: p2
+        p2                             contains      1 bytes in   1 blocks (ref 1)
+        x3                             contains      1 bytes in   1 blocks (ref 0)
+        x2                             contains      1 bytes in   1 blocks (ref 0)
+        x1                             contains      1 bytes in   1 blocks (ref 0)
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_enable_null_tracking(void);
+
+This enables tracking of the NULL memory context without enabling leak
+reporting on exit. Useful for when you want to do your own leak
+reporting call via talloc_report_null_full();
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void talloc_disable_null_tracking(void);
+
+This disables tracking of the NULL memory context.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc_zero(const void *ctx, type);
+
+The talloc_zero() macro is equivalent to:
+
+  ptr = talloc(ctx, type);
+  if (ptr) memset(ptr, 0, sizeof(type));
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_zero_size(const void *ctx, size_t size)
+
+The talloc_zero_size() function is useful when you don't have a known type
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_memdup(const void *ctx, const void *p, size_t size);
+
+The talloc_memdup() function is equivalent to:
+
+  ptr = talloc_size(ctx, size);
+  if (ptr) memcpy(ptr, p, size);
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+char *talloc_strdup(const void *ctx, const char *p);
+
+The talloc_strdup() function is equivalent to:
+
+  ptr = talloc_size(ctx, strlen(p)+1);
+  if (ptr) memcpy(ptr, p, strlen(p)+1);
+
+This functions sets the name of the new pointer to the passed
+string. This is equivalent to:
+   talloc_set_name_const(ptr, ptr)
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+char *talloc_strndup(const void *t, const char *p, size_t n);
+
+The talloc_strndup() function is the talloc equivalent of the C
+library function strndup()
+
+This functions sets the name of the new pointer to the passed
+string. This is equivalent to:
+   talloc_set_name_const(ptr, ptr)
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+char *talloc_vasprintf(const void *t, const char *fmt, va_list ap);
+
+The talloc_vasprintf() function is the talloc equivalent of the C
+library function vasprintf()
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+char *talloc_asprintf(const void *t, const char *fmt, ...);
+
+The talloc_asprintf() function is the talloc equivalent of the C
+library function asprintf()
+
+This functions sets the name of the new pointer to the passed
+string. This is equivalent to:
+   talloc_set_name_const(ptr, ptr)
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+char *talloc_asprintf_append(char *s, const char *fmt, ...);
+
+The talloc_asprintf_append() function appends the given formatted 
+string to the given string. 
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc_array(const void *ctx, type, uint_t count);
+
+The talloc_array() macro is equivalent to:
+
+  (type *)talloc_size(ctx, sizeof(type) * count);
+
+except that it provides integer overflow protection for the multiply,
+returning NULL if the multiply overflows.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_array_size(const void *ctx, size_t size, uint_t count);
+
+The talloc_array_size() function is useful when the type is not
+known. It operates in the same way as talloc_array(), but takes a size
+instead of a type.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(typeof(ptr)) talloc_array_ptrtype(const void *ctx, ptr, uint_t count);
+
+The talloc_ptrtype() macro should be used when you have a pointer to an array
+and want to allocate memory of an array to point at with this pointer. When compiling
+with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_array_size()
+and talloc_get_name() will return the current location in the source file.
+and not the type.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_realloc_fn(const void *ctx, void *ptr, size_t size);
+
+This is a non-macro version of talloc_realloc(), which is useful 
+as libraries sometimes want a ralloc function pointer. A realloc()
+implementation encapsulates the functionality of malloc(), free() and
+realloc() in one call, which is why it is useful to be able to pass
+around a single function pointer.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_autofree_context(void);
+
+This is a handy utility function that returns a talloc context
+which will be automatically freed on program exit. This can be used
+to reduce the noise in memory leak reports.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_check_name(const void *ptr, const char *name);
+
+This function checks if a pointer has the specified name. If it does
+then the pointer is returned. It it doesn't then NULL is returned.
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc_get_type(const void *ptr, type);
+
+This macro allows you to do type checking on talloc pointers. It is
+particularly useful for void* private pointers. It is equivalent to
+this:
+
+   (type *)talloc_check_name(ptr, #type)
+
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+talloc_set_type(const void *ptr, type);
+
+This macro allows you to force the name of a pointer to be a
+particular type. This can be used in conjunction with
+talloc_get_type() to do type checking on void* pointers.
+
+It is equivalent to this:
+   talloc_set_name_const(ptr, #type)
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+talloc_get_size(const void *ctx);
+
+This function lets you know the amount of memory alloced so far by
+this context. It does NOT account for subcontext memory.
+This can be used to calculate the size of an array.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+void *talloc_find_parent_byname(const void *ctx, const char *name);
+
+Find a parent memory context of the current context that has the given
+name. This can be very useful in complex programs where it may be
+difficult to pass all information down to the level you need, but you
+know the structure you want is a parent of another context.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+(type *)talloc_find_parent_bytype(ctx, type);
+
+Like talloc_find_parent_byname() but takes a type, making it typesafe.
+
diff --git a/source3/lib/talloctort.c b/source3/lib/talloc/testsuite.c
index 766cf039c0..00ea212e58 100644
--- a/source3/lib/talloctort.c
+++ b/source3/lib/talloc/testsuite.c
@@ -28,30 +28,10 @@
 #include "version.h"
 #endif /* _SAMBA_BUILD_ */
 
-#include "config.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_STDARG_H
-#include <stdarg.h>
-#endif
-
-#include <sys/time.h>
-#include <time.h>
-
+#include "replace.h"
+#include "system/time.h"
 #include "talloc.h"
 
-#ifndef False
-#define False 0
-#endif
-#ifndef True
-#define True 1
-#endif
-#ifndef BOOL
-#define BOOL int
-#endif
-
 struct torture_context;
 
 static struct timeval timeval_current(void)
@@ -84,7 +64,7 @@ static double timeval_elapsed(struct timeval *tv)
 		       (unsigned)talloc_total_size(ptr), \
 		       (unsigned)tsize); \
 		talloc_report_full(ptr, stdout); \
-		return False; \
+		return false; \
 	} \
 } while (0)
 
@@ -95,7 +75,7 @@ static double timeval_elapsed(struct timeval *tv)
 		       (unsigned)talloc_total_blocks(ptr), \
 		       (unsigned)tblocks); \
 		talloc_report_full(ptr, stdout); \
-		return False; \
+		return false; \
 	} \
 } while (0)
 
@@ -108,7 +88,7 @@ static double timeval_elapsed(struct timeval *tv)
 		talloc_report_full(ptr, stdout); \
 		talloc_report_full(parent, stdout); \
 		talloc_report_full(NULL, stdout); \
-		return False; \
+		return false; \
 	} \
 } while (0)
 
@@ -116,7 +96,7 @@ static double timeval_elapsed(struct timeval *tv)
 /*
   test references 
 */
-static BOOL test_ref1(void)
+static bool test_ref1(void)
 {
 	void *root, *p1, *p2, *ref, *r1;
 
@@ -157,7 +137,7 @@ static BOOL test_ref1(void)
 
 	printf("Testing NULL\n");
 	if (talloc_reference(root, NULL)) {
-		return False;
+		return false;
 	}
 
 	CHECK_BLOCKS(root, 1);
@@ -166,13 +146,13 @@ static BOOL test_ref1(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   test references 
 */
-static BOOL test_ref2(void)
+static bool test_ref2(void)
 {
 	void *root, *p1, *p2, *ref, *r1;
 
@@ -222,13 +202,13 @@ static BOOL test_ref2(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   test references 
 */
-static BOOL test_ref3(void)
+static bool test_ref3(void)
 {
 	void *root, *p1, *p2, *ref, *r1;
 
@@ -260,13 +240,13 @@ static BOOL test_ref3(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   test references 
 */
-static BOOL test_ref4(void)
+static bool test_ref4(void)
 {
 	void *root, *p1, *p2, *ref, *r1;
 
@@ -308,14 +288,14 @@ static BOOL test_ref4(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 
 /*
   test references 
 */
-static BOOL test_unlink1(void)
+static bool test_unlink1(void)
 {
 	void *root, *p1, *p2, *ref, *r1;
 
@@ -352,7 +332,7 @@ static BOOL test_unlink1(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 static int fail_destructor(void *ptr)
@@ -363,7 +343,7 @@ static int fail_destructor(void *ptr)
 /*
   miscellaneous tests to try to get a higher test coverage percentage
 */
-static BOOL test_misc(void)
+static bool test_misc(void)
 {
 	void *root, *p1;
 	char *p2;
@@ -377,7 +357,7 @@ static BOOL test_misc(void)
 	p1 = talloc_size(root, 0x7fffffff);
 	if (p1) {
 		printf("failed: large talloc allowed\n");
-		return False;
+		return false;
 	}
 
 	p1 = talloc_strdup(root, "foo");
@@ -395,11 +375,11 @@ static BOOL test_misc(void)
 	p2 = talloc_strdup(p1, "foo");
 	if (talloc_unlink(root, p2) != -1) {
 		printf("failed: talloc_unlink() of non-reference context should return -1\n");
-		return False;
+		return false;
 	}
 	if (talloc_unlink(p1, p2) != 0) {
 		printf("failed: talloc_unlink() of parent should succeed\n");
-		return False;
+		return false;
 	}
 	talloc_free(p1);
 	CHECK_BLOCKS(p1, 1);
@@ -409,7 +389,7 @@ static BOOL test_misc(void)
 	if (strcmp(talloc_get_name(p1), "my name is foo") != 0) {
 		printf("failed: wrong name after talloc_set_name(my name is foo) - '%s'=>'%s'\n",
 			(name?name:"NULL"), talloc_get_name(p1));
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p1, 2);
 	CHECK_BLOCKS(root, 3);
@@ -418,7 +398,7 @@ static BOOL test_misc(void)
 	if (strcmp(talloc_get_name(p1), "UNNAMED") != 0) {
 		printf("failed: wrong name after talloc_set_name(NULL) - '%s'\n",
 			talloc_get_name(p1));
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p1, 2);
 	CHECK_BLOCKS(root, 3);
@@ -426,13 +406,13 @@ static BOOL test_misc(void)
 
 	if (talloc_free(NULL) != -1) {
 		printf("talloc_free(NULL) should give -1\n");
-		return False;
+		return false;
 	}
 
 	talloc_set_destructor(p1, fail_destructor);
 	if (talloc_free(p1) != -1) {
 		printf("Failed destructor should cause talloc_free to fail\n");
-		return False;
+		return false;
 	}
 	talloc_set_destructor(p1, NULL);
 
@@ -442,24 +422,24 @@ static BOOL test_misc(void)
 	p2 = (char *)talloc_zero_size(p1, 20);
 	if (p2[19] != 0) {
 		printf("Failed to give zero memory\n");
-		return False;
+		return false;
 	}
 	talloc_free(p2);
 
 	if (talloc_strdup(root, NULL) != NULL) {
 		printf("failed: strdup on NULL should give NULL\n");
-		return False;
+		return false;
 	}
 
 	p2 = talloc_strndup(p1, "foo", 2);
 	if (strcmp("fo", p2) != 0) {
 		printf("failed: strndup doesn't work\n");
-		return False;
+		return false;
 	}
 	p2 = talloc_asprintf_append(p2, "o%c", 'd');
 	if (strcmp("food", p2) != 0) {
 		printf("failed: talloc_asprintf_append doesn't work\n");
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p2, 1);
 	CHECK_BLOCKS(p1, 3);
@@ -467,7 +447,7 @@ static BOOL test_misc(void)
 	p2 = talloc_asprintf_append(NULL, "hello %s", "world");
 	if (strcmp("hello world", p2) != 0) {
 		printf("failed: talloc_asprintf_append doesn't work\n");
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p2, 1);
 	CHECK_BLOCKS(p1, 3);
@@ -476,13 +456,13 @@ static BOOL test_misc(void)
 	d = talloc_array(p1, double, 0x20000000);
 	if (d) {
 		printf("failed: integer overflow not detected\n");
-		return False;
+		return false;
 	}
 
 	d = talloc_realloc(p1, d, double, 0x20000000);
 	if (d) {
 		printf("failed: integer overflow not detected\n");
-		return False;
+		return false;
 	}
 
 	talloc_free(p1);
@@ -497,7 +477,7 @@ static BOOL test_misc(void)
 	p2 = talloc_asprintf(p1, "my test '%s'", "string");
 	if (strcmp(p2, "my test 'string'") != 0) {
 		printf("failed: talloc_asprintf(\"my test '%%s'\", \"string\") gave: \"%s\"\n", p2);
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p1, 3);
 	CHECK_SIZE(p2, 17);
@@ -532,7 +512,7 @@ static BOOL test_misc(void)
 
 	if (talloc_unlink(root, NULL) != -1) {
 		printf("failed: talloc_unlink(root, NULL) == -1\n");
-		return False;
+		return false;
 	}
 
 	talloc_report(root, stdout);
@@ -547,14 +527,14 @@ static BOOL test_misc(void)
 	talloc_enable_leak_report();
 	talloc_enable_leak_report_full();
 
-	return True;
+	return true;
 }
 
 
 /*
   test realloc
 */
-static BOOL test_realloc(void)
+static bool test_realloc(void)
 {
 	void *root, *p1, *p2;
 
@@ -586,7 +566,7 @@ static BOOL test_realloc(void)
 	talloc_increase_ref_count(p2);
 	if (talloc_realloc_size(NULL, p2, 5) != NULL) {
 		printf("failed: talloc_realloc() on a referenced pointer should fail\n");
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(p1, 4);
 
@@ -596,7 +576,7 @@ static BOOL test_realloc(void)
 
 	if (talloc_realloc_size(NULL, p1, 0x7fffffff) != NULL) {
 		printf("failed: oversize talloc should fail\n");
-		return False;
+		return false;
 	}
 
 	talloc_realloc_size(NULL, p1, 0);
@@ -606,13 +586,13 @@ static BOOL test_realloc(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   test realloc with a child
 */
-static BOOL test_realloc_child(void)
+static bool test_realloc_child(void)
 {
 	void *root;
 	struct el2 {
@@ -650,14 +630,14 @@ static BOOL test_realloc_child(void)
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 
 /*
   test type checking
 */
-static BOOL test_type(void)
+static bool test_type(void)
 {
 	void *root;
 	struct el1 {
@@ -678,27 +658,27 @@ static BOOL test_type(void)
 
 	if (talloc_get_type(el1, struct el1) != el1) {
 		printf("type check failed on el1\n");
-		return False;
+		return false;
 	}
 	if (talloc_get_type(el1, struct el2) != NULL) {
 		printf("type check failed on el1 with el2\n");
-		return False;
+		return false;
 	}
 	talloc_set_type(el1, struct el2);
 	if (talloc_get_type(el1, struct el2) != (struct el2 *)el1) {
 		printf("type set failed on el1 with el2\n");
-		return False;
+		return false;
 	}
 
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   test steal
 */
-static BOOL test_steal(void)
+static bool test_steal(void)
 {
 	void *root, *p1, *p2;
 
@@ -715,12 +695,12 @@ static BOOL test_steal(void)
 
 	if (talloc_steal(p1, NULL) != NULL) {
 		printf("failed: stealing NULL should give NULL\n");
-		return False;
+		return false;
 	}
 
 	if (talloc_steal(p1, p1) != p1) {
 		printf("failed: stealing to ourselves is a nop\n");
-		return False;
+		return false;
 	}
 	CHECK_BLOCKS(root, 3);
 	CHECK_SIZE(root, 30);
@@ -747,13 +727,47 @@ static BOOL test_steal(void)
 	CHECK_SIZE(NULL, 3);
 	talloc_free(p1);
 
-	return True;
+	return true;
+}
+
+/*
+  test move
+*/
+static bool test_move(void)
+{
+	void *root;
+	struct t_move {
+		char *p;
+		int *x;
+	} *t1, *t2;
+	printf("TESTING MOVE\n");
+
+	root = talloc_new(NULL);
+
+	t1 = talloc(root, struct t_move);
+	t2 = talloc(root, struct t_move);
+	t1->p = talloc_strdup(t1, "foo");
+	t1->x = talloc(t1, int);
+	*t1->x = 42;
+
+	t2->p = talloc_move(t2, &t1->p);
+	t2->x = talloc_move(t2, &t1->x);
+	if (t1->p != NULL || t1->x != NULL ||
+	    strcmp(t2->p, "foo") ||
+	    *t2->x != 42) {
+		printf("talloc move failed\n");
+		return false;
+	}
+
+	talloc_free(root);
+
+	return true;
 }
 
 /*
   test talloc_realloc_fn
 */
-static BOOL test_realloc_fn(void)
+static bool test_realloc_fn(void)
 {
 	void *root, *p1;
 
@@ -774,11 +788,11 @@ static BOOL test_realloc_fn(void)
 	talloc_free(root);
 
 
-	return True;
+	return true;
 }
 
 
-static BOOL test_unref_reparent(void)
+static bool test_unref_reparent(void)
 {
 	void *root, *p1, *p2, *c1;
 
@@ -804,13 +818,13 @@ static BOOL test_unref_reparent(void)
 	talloc_free(p2);
 	talloc_free(root);
 
-	return True;
+	return true;
 }
 
 /*
   measure the speed of talloc versus malloc
 */
-static BOOL test_speed(void)
+static bool test_speed(void)
 {
 	void *ctx = talloc_new(NULL);
 	unsigned count;
@@ -848,11 +862,11 @@ static BOOL test_speed(void)
 
 	printf("malloc: %.0f ops/sec\n", count/timeval_elapsed(&tv));
 
-	return True;	
+	return true;	
 }
 
 
-static BOOL test_lifeless(void)
+static bool test_lifeless(void)
 {
 	void *top = talloc_new(NULL);
 	char *parent, *child; 
@@ -872,7 +886,7 @@ static BOOL test_lifeless(void)
 	talloc_free(child_owner);
 	talloc_free(child);
 
-	return True;
+	return true;
 }
 
 static int loop_destructor_count;
@@ -884,7 +898,7 @@ static int test_loop_destructor(char *ptr)
 	return 0;
 }
 
-static BOOL test_loop(void)
+static bool test_loop(void)
 {
 	void *top = talloc_new(NULL);
 	char *parent;
@@ -907,11 +921,11 @@ static BOOL test_loop(void)
 
 	if (loop_destructor_count != 1) {
 		printf("FAILED TO FIRE LOOP DESTRUCTOR\n");
-		return False;
+		return false;
 	}
 	loop_destructor_count = 0;
 
-	return True;
+	return true;
 }
 
 static int fail_destructor_str(char *ptr)
@@ -919,7 +933,7 @@ static int fail_destructor_str(char *ptr)
 	return -1;
 }
 
-static BOOL test_free_parent_deny_child(void)
+static bool test_free_parent_deny_child(void)
 {
 	void *top = talloc_new(NULL);
 	char *level1;
@@ -939,12 +953,12 @@ static BOOL test_free_parent_deny_child(void)
 
 	talloc_free(top);
 
-	return True;
+	return true;
 }
 
-static BOOL test_talloc_ptrtype(void)
+static bool test_talloc_ptrtype(void)
 {
-	BOOL ret = True;
+	bool ret = true;
 	void *top = talloc_new(NULL);
 	struct struct1 {
 		int foo;
@@ -963,13 +977,13 @@ static BOOL test_talloc_ptrtype(void)
 		       "(should be %lu)\n",
 			__location__, (unsigned long)talloc_get_size(s1),
 		       (unsigned long)sizeof(struct struct1));
-		ret = False;
+		ret = false;
 	}
 
 	if (strcmp(location1, talloc_get_name(s1)) != 0) {
 		printf("%s: talloc_ptrtype() sets the wrong name '%s' (should be '%s')\n",
 			__location__, talloc_get_name(s1), location1);
-		ret = False;
+		ret = false;
 	}
 
 	s2 = talloc_array_ptrtype(top, s2, 10);location2 = __location__;
@@ -979,14 +993,14 @@ static BOOL test_talloc_ptrtype(void)
 		       "%lu (should be %lu)\n",
 			__location__, (unsigned long)talloc_get_size(s2),
 		       (unsigned long)(sizeof(struct struct1)*10));
-		ret = False;
+		ret = false;
 	}
 
 	if (strcmp(location2, talloc_get_name(s2)) != 0) {
 		printf("%s: talloc_array_ptrtype() sets the wrong name '%s' (should be '%s')\n",
 			__location__, talloc_get_name(s2),
 		       location2);
-		ret = False;
+		ret = false;
 	}
 
 	s3 = talloc_array_ptrtype(top, s3, 10);location3 = __location__;
@@ -996,13 +1010,13 @@ static BOOL test_talloc_ptrtype(void)
 		       "%lu (should be %lu)\n",
 			__location__, (unsigned long)talloc_get_size(s3),
 		       (unsigned long)(sizeof(struct struct1 *)*10));
-		ret = False;
+		ret = false;
 	}
 
 	if (strcmp(location3, talloc_get_name(s3)) != 0) {
 		printf("%s: talloc_array_ptrtype() sets the wrong name '%s' (should be '%s')\n",
 			__location__, talloc_get_name(s3), location3);
-		ret = False;
+		ret = false;
 	}
 
 	s4 = talloc_array_ptrtype(top, s4, 10);location4 = __location__;
@@ -1012,13 +1026,13 @@ static BOOL test_talloc_ptrtype(void)
 		       "%lu (should be %lu)\n",
 			__location__, (unsigned long)talloc_get_size(s4),
 		       (unsigned long)(sizeof(struct struct1 **)*10));
-		ret = False;
+		ret = false;
 	}
 
 	if (strcmp(location4, talloc_get_name(s4)) != 0) {
 		printf("%s: talloc_array_ptrtype() sets the wrong name '%s' (should be '%s')\n",
 			__location__, talloc_get_name(s4), location4);
-		ret = False;
+		ret = false;
 	}
 
 	talloc_free(top);
@@ -1026,9 +1040,9 @@ static BOOL test_talloc_ptrtype(void)
 	return ret;
 }
 
-BOOL torture_local_talloc(struct torture_context *torture) 
+bool torture_local_talloc(struct torture_context *torture) 
 {
-	BOOL ret = True;
+	bool ret = true;
 
 	talloc_disable_null_tracking();
 	talloc_enable_null_tracking();
@@ -1042,6 +1056,7 @@ BOOL torture_local_talloc(struct torture_context *torture)
 	ret &= test_realloc();
 	ret &= test_realloc_child();
 	ret &= test_steal();
+	ret &= test_move();
 	ret &= test_unref_reparent();
 	ret &= test_realloc_fn();
 	ret &= test_type();
diff --git a/source3/lib/talloc/web/index.html b/source3/lib/talloc/web/index.html
new file mode 100644
index 0000000000..106920e8a5
--- /dev/null
+++ b/source3/lib/talloc/web/index.html
@@ -0,0 +1,49 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
+<HTML>
+<HEAD>
+<TITLE>talloc</TITLE>
+</HEAD>
+<BODY BGCOLOR="#ffffff" TEXT="#000000" VLINK="#292555" LINK="#292555" ALINK="#cc0033">
+
+<h1>talloc</h1>
+
+talloc is a hierarchical pool based memory allocator with
+destructors. It is the core memory allocator used in Samba4, and has
+made a huge difference in many aspects of Samba4 development.<p>
+
+To get started with talloc, I would recommend you read the <a
+href="http://samba.org/ftp/unpacked/samba4/source/lib/talloc/talloc_guide.txt">talloc guide</a>.
+
+<h2>Discussion and bug reports</h2>
+
+talloc does not currently have its own mailing list or bug tracking
+system. For now, please use the <a
+href="https://lists.samba.org/mailman/listinfo/samba-technical">samba-technical</a>
+mailing list, and the <a href="http://bugzilla.samba.org/">Samba
+bugzilla</a> bug tracking system.
+
+<h2>Download</h2>
+
+You can download the latest release either via rsync or anonymous
+svn. To fetch via svn use the following command:
+
+<pre>
+  svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0/source/lib/talloc talloc
+  svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0/source/lib/replace libreplace
+</pre>
+
+To fetch via rsync use this command:
+
+<pre>
+  rsync -Pavz samba.org::ftp/unpacked/samba4/source/lib/talloc .
+  rsync -Pavz samba.org::ftp/unpacked/samba4/source/lib/libreplace .
+</pre>
+
+<hr>
+<tiny>
+<a href="http://samba.org/~tridge/">Andrew Tridgell</a><br>
+talloc AT tridgell.net
+</tiny>
+
+</BODY>
+</HTML>