s3: Remove cli_write

Signed-off-by: Jeremy Allison <jra@samba.org>

1 files changed, 0 insertions, 158 deletions

diff --git a/source3/libsmb/clireadwrite.c b/source3/libsmb/clireadwrite.c
index 6482a335e1..d36b280843 100644
--- a/source3/libsmb/clireadwrite.c
+++ b/source3/libsmb/clireadwrite.c
@@ -693,164 +693,6 @@ ssize_t cli_read(struct cli_state *cli, uint16_t fnum, char *buf,
 }
 
 /****************************************************************************
- Issue a single SMBwrite and don't wait for a reply.
-****************************************************************************/
-
-static bool cli_issue_write(struct cli_state *cli,
-				uint16_t fnum,
-				off_t offset,
-				uint16 mode,
-				const char *buf,
-				size_t size)
-{
-	char *p;
-	bool large_writex = false;
-	/* We can only do direct writes if not signing and not encrypting. */
-	bool direct_writes = !client_is_signing_on(cli) && !cli_encryption_on(cli);
-
-	if (!direct_writes && size + 1 > cli->bufsize) {
-		cli->outbuf = (char *)SMB_REALLOC(cli->outbuf, size + 1024);
-		if (!cli->outbuf) {
-			return False;
-		}
-		cli->inbuf = (char *)SMB_REALLOC(cli->inbuf, size + 1024);
-		if (cli->inbuf == NULL) {
-			SAFE_FREE(cli->outbuf);
-			return False;
-		}
-		cli->bufsize = size + 1024;
-	}
-
-	memset(cli->outbuf,'\0',smb_size);
-	memset(cli->inbuf,'\0',smb_size);
-
-	if (cli->capabilities & CAP_LARGE_FILES) {
-		large_writex = True;
-	}
-
-	if (large_writex) {
-		cli_set_message(cli->outbuf,14,0,True);
-	} else {
-		cli_set_message(cli->outbuf,12,0,True);
-	}
-
-	SCVAL(cli->outbuf,smb_com,SMBwriteX);
-	SSVAL(cli->outbuf,smb_tid,cli->cnum);
-	cli_setup_packet(cli);
-
-	SCVAL(cli->outbuf,smb_vwv0,0xFF);
-	SSVAL(cli->outbuf,smb_vwv2,fnum);
-
-	SIVAL(cli->outbuf,smb_vwv3,offset);
-	SIVAL(cli->outbuf,smb_vwv5,0);
-	SSVAL(cli->outbuf,smb_vwv7,mode);
-
-	SSVAL(cli->outbuf,smb_vwv8,(mode & 0x0008) ? size : 0);
-	/*
-	 * According to CIFS-TR-1p00, this following field should only
-	 * be set if CAP_LARGE_WRITEX is set. We should check this
-	 * locally. However, this check might already have been
-	 * done by our callers.
-	 */
-	SSVAL(cli->outbuf,smb_vwv9,(size>>16));
-	SSVAL(cli->outbuf,smb_vwv10,size);
-	/* +1 is pad byte. */
-	SSVAL(cli->outbuf,smb_vwv11,
-	      smb_buf(cli->outbuf) - smb_base(cli->outbuf) + 1);
-
-	if (large_writex) {
-		SIVAL(cli->outbuf,smb_vwv12,(((uint64_t)offset)>>32) & 0xffffffff);
-	}
-
-	p = smb_base(cli->outbuf) + SVAL(cli->outbuf,smb_vwv11) -1;
-	*p++ = '\0'; /* pad byte. */
-	if (!direct_writes) {
-		memcpy(p, buf, size);
-	}
-	if (size > 0x1FFFF) {
-		/* This is a POSIX 14 word large write. */
-		set_message_bcc(cli->outbuf, 0); /* Set bcc to zero. */
-		_smb_setlen_large(cli->outbuf,smb_size + 28 + 1 /* pad */ + size - 4);
-	} else {
-		cli_setup_bcc(cli, p+size);
-	}
-
-	show_msg(cli->outbuf);
-	if (direct_writes) {
-		/* For direct writes we now need to write the data
-		 * directly out of buf. */
-		return cli_send_smb_direct_writeX(cli, buf, size);
-	} else {
-		return cli_send_smb(cli);
-	}
-}
-
-/****************************************************************************
-  write to a file
-  write_mode: 0x0001 disallow write cacheing
-              0x0002 return bytes remaining
-              0x0004 use raw named pipe protocol
-              0x0008 start of message mode named pipe protocol
-****************************************************************************/
-
-ssize_t cli_write(struct cli_state *cli,
-    	         uint16_t fnum, uint16 write_mode,
-		 const char *buf, off_t offset, size_t size)
-{
-	ssize_t bwritten = 0;
-	unsigned int issued = 0;
-	unsigned int received = 0;
-	int mpx = 1;
-	size_t writesize;
-	int blocks;
-
-	if(cli->max_mux > 1) {
-		mpx = cli->max_mux-1;
-	} else {
-		mpx = 1;
-	}
-
-	writesize = cli_write_max_bufsize(cli, write_mode);
-
-	blocks = (size + (writesize-1)) / writesize;
-
-	while (received < blocks) {
-
-		while ((issued - received < mpx) && (issued < blocks)) {
-			ssize_t bsent = issued * writesize;
-			ssize_t size1 = MIN(writesize, size - bsent);
-
-			if (!cli_issue_write(cli, fnum, offset + bsent,
-			                write_mode,
-			                buf + bsent,
-					size1))
-				return -1;
-			issued++;
-		}
-
-		if (!cli_receive_smb(cli)) {
-			return bwritten;
-		}
-
-		received++;
-
-		if (cli_is_error(cli))
-			break;
-
-		bwritten += SVAL(cli->inbuf, smb_vwv2);
-		if (writesize > 0xFFFF) {
-			bwritten += (((int)(SVAL(cli->inbuf, smb_vwv4)))<<16);
-		}
-	}
-
-	while (received < issued && cli_receive_smb(cli)) {
-		received++;
-	}
-
-	return bwritten;
-}
-
-/****************************************************************************
   write to a file using a SMBwrite and not bypassing 0 byte writes
 ****************************************************************************/