summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--source4/lib/util/Doxyfile1229
-rw-r--r--source4/lib/util/capability.c5
-rw-r--r--source4/lib/util/data_blob.c53
-rw-r--r--source4/lib/util/debug.c23
-rw-r--r--source4/lib/util/fault.c26
-rw-r--r--source4/lib/util/fsusage.c16
-rw-r--r--source4/lib/util/genrand.c25
-rw-r--r--source4/lib/util/idtree.c4
-rw-r--r--source4/lib/util/module.c5
-rw-r--r--source4/lib/util/ms_fnmatch.c6
-rw-r--r--source4/lib/util/mutex.c7
-rw-r--r--source4/lib/util/pidfile.c15
-rw-r--r--source4/lib/util/signal.c21
-rw-r--r--source4/lib/util/substitute.c31
-rw-r--r--source4/lib/util/time.c105
-rw-r--r--source4/lib/util/unix_privs.c5
-rw-r--r--source4/lib/util/util.c97
-rw-r--r--source4/lib/util/util_file.c45
-rw-r--r--source4/lib/util/util_sock.c9
-rw-r--r--source4/lib/util/util_str.c24
-rw-r--r--source4/lib/util/util_strlist.c34
-rw-r--r--source4/lib/util/util_unistr.c23
-rw-r--r--source4/lib/util/xfile.c5
23 files changed, 1584 insertions, 229 deletions
diff --git a/source4/lib/util/Doxyfile b/source4/lib/util/Doxyfile
new file mode 100644
index 0000000000..7205513eb1
--- /dev/null
+++ b/source4/lib/util/Doxyfile
@@ -0,0 +1,1229 @@
+# Doxyfile 1.4.4
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = SAMBA_UTIL
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = apidocs
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
+# Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE = English
+
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH = include
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF = YES
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP = YES
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
+# only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = NO
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is YES.
+
+SHOW_DIRECTORIES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the progam writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = .
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
+
+FILE_PATTERNS = *.c byteorder.h debug.h mutex.h util.h xfile.h *.dox
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE = include/config.h include/dlinklist.h \
+ include/includes.h
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH = examples
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_PREDEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = NO
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_WIDTH = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that a graph may be further truncated if the graph's
+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
+# the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE = NO
diff --git a/source4/lib/util/capability.c b/source4/lib/util/capability.c
index 0cebd33303..ae08fab533 100644
--- a/source4/lib/util/capability.c
+++ b/source4/lib/util/capability.c
@@ -19,6 +19,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/**
+ * @file
+ * @brief Capabilities functions
+ **/
+
/*
capabilities fns - will be needed when we enable kernel oplocks
*/
diff --git a/source4/lib/util/data_blob.c b/source4/lib/util/data_blob.c
index c6471fbf54..dfcfaa41ea 100644
--- a/source4/lib/util/data_blob.c
+++ b/source4/lib/util/data_blob.c
@@ -21,10 +21,15 @@
#include "includes.h"
-/*******************************************************************
+/**
+ * @file
+ * @brief Manipulation of arbitrary data blobs
+ **/
+
+/**
construct a data blob, must be freed with data_blob_free()
you can pass NULL for p and get a blank data blob
-*******************************************************************/
+**/
DATA_BLOB data_blob_named(const void *p, size_t length, const char *name)
{
DATA_BLOB ret;
@@ -48,9 +53,9 @@ DATA_BLOB data_blob_named(const void *p, size_t length, const char *name)
return ret;
}
-/*******************************************************************
+/**
construct a data blob, using supplied TALLOC_CTX
-*******************************************************************/
+**/
DATA_BLOB data_blob_talloc_named(TALLOC_CTX *mem_ctx, const void *p, size_t length, const char *name)
{
DATA_BLOB ret = data_blob_named(p, length, name);
@@ -62,10 +67,10 @@ DATA_BLOB data_blob_talloc_named(TALLOC_CTX *mem_ctx, const void *p, size_t leng
}
-/*******************************************************************
+/**
reference a data blob, to the supplied TALLOC_CTX.
Returns a NULL DATA_BLOB on failure
-*******************************************************************/
+**/
DATA_BLOB data_blob_talloc_reference(TALLOC_CTX *mem_ctx, DATA_BLOB *blob)
{
DATA_BLOB ret = *blob;
@@ -78,11 +83,11 @@ DATA_BLOB data_blob_talloc_reference(TALLOC_CTX *mem_ctx, DATA_BLOB *blob)
return ret;
}
-/*******************************************************************
+/**
construct a zero data blob, using supplied TALLOC_CTX.
use this sparingly as it initialises data - better to initialise
yourself if you want specific data in the blob
-*******************************************************************/
+**/
DATA_BLOB data_blob_talloc_zero(TALLOC_CTX *mem_ctx, size_t length)
{
DATA_BLOB blob = data_blob_talloc(mem_ctx, NULL, length);
@@ -90,9 +95,9 @@ DATA_BLOB data_blob_talloc_zero(TALLOC_CTX *mem_ctx, size_t length)
return blob;
}
-/*******************************************************************
+/**
free a data blob
-*******************************************************************/
+**/
void data_blob_free(DATA_BLOB *d)
{
if (d) {
@@ -102,9 +107,9 @@ void data_blob_free(DATA_BLOB *d)
}
}
-/*******************************************************************
+/**
clear a DATA_BLOB's contents
-*******************************************************************/
+**/
void data_blob_clear(DATA_BLOB *d)
{
if (d->data) {
@@ -112,9 +117,9 @@ void data_blob_clear(DATA_BLOB *d)
}
}
-/*******************************************************************
+/**
free a data blob and clear its contents
-*******************************************************************/
+**/
void data_blob_clear_free(DATA_BLOB *d)
{
data_blob_clear(d);
@@ -122,9 +127,9 @@ void data_blob_clear_free(DATA_BLOB *d)
}
-/*******************************************************************
+/**
check if two data blobs are equal
-*******************************************************************/
+**/
BOOL data_blob_equal(const DATA_BLOB *d1, const DATA_BLOB *d2)
{
if (d1->length != d2->length) {
@@ -142,9 +147,9 @@ BOOL data_blob_equal(const DATA_BLOB *d1, const DATA_BLOB *d2)
return False;
}
-/*******************************************************************
+/**
print the data_blob as hex string
-*******************************************************************/
+**/
char *data_blob_hex_string(TALLOC_CTX *mem_ctx, DATA_BLOB *blob)
{
int i;
@@ -161,10 +166,10 @@ char *data_blob_hex_string(TALLOC_CTX *mem_ctx, DATA_BLOB *blob)
return hex_string;
}
-/*
+/**
useful for constructing data blobs in test suites, while
avoiding const warnings
-*/
+**/
DATA_BLOB data_blob_string_const(const char *str)
{
DATA_BLOB blob;
@@ -182,9 +187,9 @@ DATA_BLOB data_blob_const(const void *p, size_t length)
}
-/*
+/**
realloc a data_blob
-*/
+**/
NTSTATUS data_blob_realloc(TALLOC_CTX *mem_ctx, DATA_BLOB *blob, size_t length)
{
blob->data = talloc_realloc_size(mem_ctx, blob->data, length);
@@ -193,9 +198,9 @@ NTSTATUS data_blob_realloc(TALLOC_CTX *mem_ctx, DATA_BLOB *blob, size_t length)
return NT_STATUS_OK;
}
-/*
+/**
append some data to a data blob
-*/
+**/
NTSTATUS data_blob_append(TALLOC_CTX *mem_ctx, DATA_BLOB *blob,
const void *p, size_t length)
{
diff --git a/source4/lib/util/debug.c b/source4/lib/util/debug.c
index 9df6e573b0..3a71ed2df6 100644
--- a/source4/lib/util/debug.c
+++ b/source4/lib/util/debug.c
@@ -24,6 +24,11 @@
#include "system/time.h"
#include "dynconfig.h"
+/**
+ * @file
+ * @brief Debug logging
+ **/
+
/* this global variable determines what messages are printed */
int DEBUGLEVEL;
@@ -74,7 +79,7 @@ void do_debug(const char *format, ...)
free(s);
}
-/*
+/**
reopen the log file (usually called because the log file name might have changed)
*/
void reopen_logs(void)
@@ -118,7 +123,7 @@ void reopen_logs(void)
}
}
-/*
+/**
control the name of the logfile and whether logging will be to stdout, stderr
or a file
*/
@@ -133,7 +138,7 @@ void setup_logging(const char *prog_name, enum debug_logtype new_logtype)
reopen_logs();
}
-/*
+/**
return a string constant containing n tabs
no more than 10 tabs are returned
*/
@@ -146,8 +151,8 @@ const char *do_debug_tab(uint_t n)
}
-/*
- log/print suspicious usage - print comments and backtrace
+/**
+ log suspicious usage - print comments and backtrace
*/
void log_suspicious_usage(const char *from, const char *info)
{
@@ -155,6 +160,12 @@ void log_suspicious_usage(const char *from, const char *info)
debug_handlers.ops.log_suspicious_usage(from, info);
}
}
+
+
+/**
+ print suspicious usage - print comments and backtrace
+*/
+
void print_suspicious_usage(const char* from, const char* info)
{
if (debug_handlers.ops.print_suspicious_usage) {
@@ -195,7 +206,7 @@ void log_task_id(void)
}
}
-/*
+/**
register a set of debug handlers.
*/
void register_debug_handlers(const char *name, struct debug_ops *ops)
diff --git a/source4/lib/util/fault.c b/source4/lib/util/fault.c
index 3670575dcc..abe3f141ce 100644
--- a/source4/lib/util/fault.c
+++ b/source4/lib/util/fault.c
@@ -23,6 +23,11 @@
#include "system/wait.h"
#include "system/filesys.h"
+/**
+ * @file
+ * @brief Fault handling
+ */
+
/* the registered fault handler */
static struct {
const char *name;
@@ -38,6 +43,9 @@ static const char *progname;
#include <libexc.h>
#endif
+/**
+ * Write backtrace to debug log
+ */
void call_backtrace(void)
{
#ifdef HAVE_BACKTRACE
@@ -101,9 +109,9 @@ void call_backtrace(void)
#endif
}
-/*******************************************************************
+/**
Something really nasty happened - panic !
-********************************************************************/
+**/
void smb_panic(const char *why)
{
const char *cmd = lp_panic_action();
@@ -138,9 +146,9 @@ void smb_panic(const char *why)
abort();
}
-/*******************************************************************
+/**
report a fault
-********************************************************************/
+**/
static void fault_report(int sig)
{
static int counter;
@@ -157,9 +165,9 @@ static void fault_report(int sig)
exit(1);
}
-/****************************************************************************
+/**
catch serious errors
-****************************************************************************/
+**/
static void sig_fault(int sig)
{
if (fault_handlers.fault_handler) {
@@ -170,9 +178,9 @@ static void sig_fault(int sig)
fault_report(sig);
}
-/*******************************************************************
+/**
setup our fault handlers
-********************************************************************/
+**/
void fault_setup(const char *pname)
{
if (progname == NULL) {
@@ -192,7 +200,7 @@ void fault_setup(const char *pname)
#endif
}
-/*
+/**
register a fault handler.
Should only be called once in the execution of smbd.
*/
diff --git a/source4/lib/util/fsusage.c b/source4/lib/util/fsusage.c
index f817672544..dde9c61eb3 100644
--- a/source4/lib/util/fsusage.c
+++ b/source4/lib/util/fsusage.c
@@ -21,6 +21,10 @@
#include "includes.h"
#include "system/filesys.h"
+/**
+ * @file
+ * @brief Utility functions for getting the amount of free disk space
+ */
/* Return the number of TOSIZE-byte blocks used by
BLOCKS FROMSIZE-byte blocks, rounding away from zero.
@@ -35,11 +39,13 @@ static uint64_t adjust_blocks(uint64_t blocks, uint64_t fromsize, uint64_t tosiz
return (blocks + 1) / (tosize / fromsize);
}
-/* this does all of the system specific guff to get the free disk space.
- It is derived from code in the GNU fileutils package, but has been
- considerably mangled for use here
-
- results are returned in *dfree and *dsize, in 512 byte units
+/**
+ * Retrieve amount of free disk space.
+ * this does all of the system specific guff to get the free disk space.
+ * It is derived from code in the GNU fileutils package, but has been
+ * considerably mangled for use here
+ *
+ * results are returned in *dfree and *dsize, in 512 byte units
*/
int sys_fsusage(const char *path, uint64_t *dfree, uint64_t *dsize)
{
diff --git a/source4/lib/util/genrand.c b/source4/lib/util/genrand.c
index 1149314d0b..a264ac4e31 100644
--- a/source4/lib/util/genrand.c
+++ b/source4/lib/util/genrand.c
@@ -25,15 +25,20 @@
#include "system/filesys.h"
#include "lib/crypto/crypto.h"
+/**
+ * @file
+ * @brief Random number generation
+ */
+
static unsigned char hash[258];
static uint32_t counter;
static BOOL done_reseed = False;
static void (*reseed_callback)(int *newseed);
-/****************************************************************
+/**
Copy any user given reseed data.
-*****************************************************************/
+**/
void set_rand_reseed_callback(void (*fn)(int *))
{
@@ -196,9 +201,9 @@ static int do_reseed(BOOL use_fd, int fd)
return -1;
}
-/*
+/**
Interface to the (hopefully) good crypto random number generator.
-*/
+**/
void generate_random_buffer(uint8_t *out, int len)
{
static int urand_fd = -1;
@@ -242,9 +247,9 @@ void generate_random_buffer(uint8_t *out, int len)
}
}
-/*
+/**
generate a single random uint32_t
-*/
+**/
uint32_t generate_random(void)
{
uint8_t v[4];
@@ -253,9 +258,9 @@ uint32_t generate_random(void)
}
-/*
+/**
very basic password quality checker
-*/
+**/
BOOL check_password_quality(const char *s)
{
int has_digit=0, has_capital=0, has_lower=0;
@@ -273,9 +278,9 @@ BOOL check_password_quality(const char *s)
return has_digit && has_lower && has_capital;
}
-/*******************************************************************
+/**
Use the random number generator to generate a random string.
-********************************************************************/
+**/
char *generate_random_str_list(TALLOC_CTX *mem_ctx, size_t len, const char *list)
{
diff --git a/source4/lib/util/idtree.c b/source4/lib/util/idtree.c
index a67a80940a..1ccf6d5e81 100644
--- a/source4/lib/util/idtree.c
+++ b/source4/lib/util/idtree.c
@@ -29,6 +29,10 @@
see the section marked "public interface" below for documentation
*/
+/**
+ * @file
+ */
+
#include "includes.h"
#define IDR_BITS 5
diff --git a/source4/lib/util/module.c b/source4/lib/util/module.c
index 672d8df7ce..ad8afe2b16 100644
--- a/source4/lib/util/module.c
+++ b/source4/lib/util/module.c
@@ -18,6 +18,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/**
+ * @file
+ * @brief Module initialization function handling
+ */
+
#include "includes.h"
#include "system/dir.h"
diff --git a/source4/lib/util/ms_fnmatch.c b/source4/lib/util/ms_fnmatch.c
index d44c8b87da..a4fca4fa0a 100644
--- a/source4/lib/util/ms_fnmatch.c
+++ b/source4/lib/util/ms_fnmatch.c
@@ -24,6 +24,10 @@
code now
*/
+/**
+ * @file
+ * @brief MS-style Filename matching
+ */
#include "includes.h"
@@ -212,7 +216,7 @@ int ms_fnmatch(const char *pattern, const char *string, enum protocol_types prot
}
-/* a generic fnmatch function - uses for non-CIFS pattern matching */
+/** a generic fnmatch function - uses for non-CIFS pattern matching */
int gen_fnmatch(const char *pattern, const char *string)
{
return ms_fnmatch(pattern, string, PROTOCOL_NT1);
diff --git a/source4/lib/util/mutex.c b/source4/lib/util/mutex.c
index 480ba92cc0..79c281ff0c 100644
--- a/source4/lib/util/mutex.c
+++ b/source4/lib/util/mutex.c
@@ -20,6 +20,11 @@
*/
#include "includes.h"
#include "mutex.h"
+
+/**
+ * @file
+ * @brief Mutex utility functions
+ */
/* the registered mutex handlers */
static struct {
@@ -30,7 +35,7 @@ static struct {
/* read/write lock routines */
-/*
+/**
register a set of mutex/rwlock handlers.
Should only be called once in the execution of smbd.
*/
diff --git a/source4/lib/util/pidfile.c b/source4/lib/util/pidfile.c
index 9a7c197f70..7f56fa5641 100644
--- a/source4/lib/util/pidfile.c
+++ b/source4/lib/util/pidfile.c
@@ -27,8 +27,15 @@
#define O_NONBLOCK
#endif
-/* return the pid in a pidfile. return 0 if the process (or pidfile)
- does not exist */
+/**
+ * @file
+ * @brief Pid file handling
+ */
+
+/**
+ * return the pid in a pidfile. return 0 if the process (or pidfile)
+ * does not exist
+ */
pid_t pidfile_pid(const char *name)
{
int fd;
@@ -73,7 +80,9 @@ pid_t pidfile_pid(const char *name)
return 0;
}
-/* create a pid file in the pid directory. open it and leave it locked */
+/**
+ * create a pid file in the pid directory. open it and leave it locked
+ */
void pidfile_create(const char *name)
{
int fd;
diff --git a/source4/lib/util/signal.c b/source4/lib/util/signal.c
index 6c0bb4007a..a0cb90dbf6 100644
--- a/source4/lib/util/signal.c
+++ b/source4/lib/util/signal.c
@@ -22,6 +22,11 @@
#include "includes.h"
#include "system/wait.h"
+/**
+ * @file
+ * @brief Signal handling
+ */
+
/****************************************************************************
Catch child exits and reap the child zombie status.
****************************************************************************/
@@ -61,9 +66,9 @@ static void sig_cld_leave_status(int signum)
#endif
}
-/*******************************************************************
+/**
Block sigs.
-********************************************************************/
+**/
void BlockSignals(BOOL block,int signum)
{
@@ -88,12 +93,12 @@ void BlockSignals(BOOL block,int signum)
#endif
}
-/*******************************************************************
+/**
Catch a signal. This should implement the following semantics:
1) The handler remains installed after being called.
2) The signal should be blocked during handler execution.
-********************************************************************/
+**/
void (*CatchSignal(int signum,void (*handler)(int )))(int)
{
@@ -121,18 +126,18 @@ void (*CatchSignal(int signum,void (*handler)(int )))(int)
#endif
}
-/*******************************************************************
+/**
Ignore SIGCLD via whatever means is necessary for this OS.
-********************************************************************/
+**/
void CatchChild(void)
{
CatchSignal(SIGCLD, sig_cld);
}
-/*******************************************************************
+/**
Catch SIGCLD but leave the child around so it's status can be reaped.
-********************************************************************/
+**/
void CatchChildLeaveStatus(void)
{
diff --git a/source4/lib/util/substitute.c b/source4/lib/util/substitute.c
index 34a2ad9f82..d461cedf4c 100644
--- a/source4/lib/util/substitute.c
+++ b/source4/lib/util/substitute.c
@@ -22,6 +22,11 @@
#include "includes.h"
#include "smb_server/smb_server.h"
+/**
+ * @file
+ * @brief Substitution handling
+ */
+
/* oh bugger - I really didn't want to have a top-level context
anywhere, but until we change all lp_*() calls to take a context
argument this is needed */
@@ -66,7 +71,7 @@ void sub_set_remote_arch(const char *str)
setup_string(&sub->remote_arch, str);
}
-/*
+/**
setup the string used by %U substitution
*/
void sub_set_user_name(const char *name)
@@ -75,17 +80,17 @@ void sub_set_user_name(const char *name)
setup_string(&sub->user_name, name);
}
-/****************************************************************************
-FOO
-****************************************************************************/
+/**
+FIXME
+**/
void standard_sub_basic(char *str,size_t len)
{
}
-/****************************************************************************
+/**
Do some standard substitutions in a string.
This function will return an allocated string that have to be freed.
-****************************************************************************/
+**/
char *talloc_sub_basic(TALLOC_CTX *mem_ctx, const char *smb_name, const char *str)
{
return talloc_strdup(mem_ctx, str);
@@ -96,10 +101,10 @@ char *alloc_sub_basic(const char *smb_name, const char *str)
return strdup(str);
}
-/****************************************************************************
+/**
Do some specific substitutions in a string.
This function will return an allocated string that have to be freed.
-****************************************************************************/
+**/
char *talloc_sub_specified(TALLOC_CTX *mem_ctx,
const char *input_string,
@@ -138,9 +143,9 @@ char *alloc_sub_advanced(int snum, const char *user,
return strdup(str);
}
-/****************************************************************************
+/**
Do some standard substitutions in a string.
-****************************************************************************/
+**/
void standard_sub_tcon(struct smbsrv_tcon *tcon, char *str, size_t len)
{
@@ -156,9 +161,9 @@ char *alloc_sub_tcon(struct smbsrv_tcon *tcon, char *str)
return strdup(str);
}
-/****************************************************************************
- Like standard_sub but by snum.
-****************************************************************************/
+/**
+ Like standard_sub but by snum. FIXME
+**/
void standard_sub_snum(int snum, char *str, size_t len)
{
diff --git a/source4/lib/util/time.c b/source4/lib/util/time.c
index 7721a2c456..a56175cda9 100644
--- a/source4/lib/util/time.c
+++ b/source4/lib/util/time.c
@@ -23,6 +23,11 @@
#include "includes.h"
#include "system/time.h"
+/**
+ * @file
+ * @brief time handling functions
+ */
+
#ifndef TIME_T_MIN
/* we use 0 here, because (time_t)-1 means error */
#define TIME_T_MIN 0
@@ -37,17 +42,17 @@
#define TIME_T_MAX MIN(INT32_MAX,_TYPE_MAXIMUM(time_t))
#endif
-/*******************************************************************
+/**
External access to time_t_min and time_t_max.
-********************************************************************/
+**/
time_t get_time_t_max(void)
{
return TIME_T_MAX;
}
-/*******************************************************************
+/**
a gettimeofday wrapper
-********************************************************************/
+**/
void GetTimeOfDay(struct timeval *tval)
{
#ifdef HAVE_GETTIMEOFDAY_TZ
@@ -60,10 +65,10 @@ void GetTimeOfDay(struct timeval *tval)
#define TIME_FIXUP_CONSTANT 11644473600LL
-/****************************************************************************
+/**
interpret an 8 byte "filetime" structure to a time_t
It's originally in "100ns units since jan 1st 1601"
-****************************************************************************/
+**/
time_t nt_time_to_unix(NTTIME nt)
{
if (nt == 0) {
@@ -84,10 +89,10 @@ time_t nt_time_to_unix(NTTIME nt)
}
-/****************************************************************************
+/**
put a 8 byte filetime from a time_t
This takes GMT as input
-****************************************************************************/
+**/
void unix_to_nt_time(NTTIME *nt, time_t t)
{
uint64_t t2;
@@ -109,9 +114,9 @@ void unix_to_nt_time(NTTIME *nt, time_t t)
}
-/****************************************************************************
+/**
check if it's a null unix time
-****************************************************************************/
+**/
BOOL null_time(time_t t)
{
return t == 0 ||
@@ -120,9 +125,9 @@ BOOL null_time(time_t t)
}
-/****************************************************************************
+/**
check if it's a null NTTIME
-****************************************************************************/
+**/
BOOL null_nttime(NTTIME t)
{
return t == 0 || t == (NTTIME)-1;
@@ -176,20 +181,20 @@ static uint32_t make_dos_date(time_t unixdate, int zone_offset)
return ret;
}
-/*******************************************************************
+/**
put a dos date into a buffer (time/date format)
This takes GMT time and puts local time in the buffer
-********************************************************************/
+**/
void push_dos_date(uint8_t *buf, int offset, time_t unixdate, int zone_offset)
{
uint32_t x = make_dos_date(unixdate, zone_offset);
SIVAL(buf,offset,x);
}
-/*******************************************************************
+/**
put a dos date into a buffer (date/time format)
This takes GMT time and puts local time in the buffer
-********************************************************************/
+**/
void push_dos_date2(uint8_t *buf,int offset,time_t unixdate, int zone_offset)
{
uint32_t x;
@@ -198,11 +203,11 @@ void push_dos_date2(uint8_t *buf,int offset,time_t unixdate, int zone_offset)
SIVAL(buf,offset,x);
}
-/*******************************************************************
+/**
put a dos 32 bit "unix like" date into a buffer. This routine takes
GMT and converts it to LOCAL time before putting it (most SMBs assume
localtime for this sort of date)
-********************************************************************/
+**/
void push_dos_date3(uint8_t *buf,int offset,time_t unixdate, int zone_offset)
{
if (!null_time(unixdate)) {
@@ -229,10 +234,10 @@ static void interpret_dos_date(uint32_t date,int *year,int *month,int *day,int *
*year = ((p3>>1)&0xFF) + 80;
}
-/*******************************************************************
+/**
create a unix date (int GMT) from a dos date (which is actually in
localtime)
-********************************************************************/
+**/
time_t pull_dos_date(const uint8_t *date_ptr, int zone_offset)
{
uint32_t dos_date=0;
@@ -254,9 +259,9 @@ time_t pull_dos_date(const uint8_t *date_ptr, int zone_offset)
return ret;
}
-/*******************************************************************
+/**
like make_unix_date() but the words are reversed
-********************************************************************/
+**/
time_t pull_dos_date2(const uint8_t *date_ptr, int zone_offset)
{
uint32_t x,x2;
@@ -268,10 +273,10 @@ time_t pull_dos_date2(const uint8_t *date_ptr, int zone_offset)
return pull_dos_date((void *)&x, zone_offset);
}
-/*******************************************************************
+/**
create a unix GMT date from a dos date in 32 bit "unix like" format
these generally arrive as localtimes, with corresponding DST
- ******************************************************************/
+**/
time_t pull_dos_date3(const uint8_t *date_ptr, int zone_offset)
{
time_t t = (time_t)IVAL(date_ptr,0);
@@ -282,9 +287,9 @@ time_t pull_dos_date3(const uint8_t *date_ptr, int zone_offset)
}
-/***************************************************************************
+/**
return a HTTP/1.0 time string
- ***************************************************************************/
+**/
char *http_timestring(TALLOC_CTX *mem_ctx, time_t t)
{
char *buf;
@@ -308,9 +313,9 @@ char *http_timestring(TALLOC_CTX *mem_ctx, time_t t)
return buf;
}
-/****************************************************************************
+/**
Return the date and time as a string
-****************************************************************************/
+**/
char *timestring(TALLOC_CTX *mem_ctx, time_t t)
{
char *TimeBuf;
@@ -338,7 +343,7 @@ char *timestring(TALLOC_CTX *mem_ctx, time_t t)
return TimeBuf;
}
-/*
+/**
return a talloced string representing a NTTIME for human consumption
*/
const char *nt_time_string(TALLOC_CTX *mem_ctx, NTTIME nt)
@@ -352,7 +357,7 @@ const char *nt_time_string(TALLOC_CTX *mem_ctx, NTTIME nt)
}
-/*
+/**
put a NTTIME into a packet
*/
void push_nttime(uint8_t *base, uint16_t offset, NTTIME t)
@@ -360,7 +365,7 @@ void push_nttime(uint8_t *base, uint16_t offset, NTTIME t)
SBVAL(base, offset, t);
}
-/*
+/**
pull a NTTIME from a packet
*/
NTTIME pull_nttime(uint8_t *base, uint16_t offset)
@@ -369,7 +374,7 @@ NTTIME pull_nttime(uint8_t *base, uint16_t offset)
return ret;
}
-/*
+/**
parse a nttime as a large integer in a string and return a NTTIME
*/
NTTIME nttime_from_string(const char *s)
@@ -377,7 +382,7 @@ NTTIME nttime_from_string(const char *s)
return strtoull(s, NULL, 0);
}
-/*
+/**
return (tv1 - tv2) in microseconds
*/
int64_t usec_time_diff(struct timeval *tv1, struct timeval *tv2)
@@ -387,7 +392,7 @@ int64_t usec_time_diff(struct timeval *tv1, struct timeval *tv2)
}
-/*
+/**
return a zero timeval
*/
struct timeval timeval_zero(void)
@@ -398,7 +403,7 @@ struct timeval timeval_zero(void)
return tv;
}
-/*
+/**
return True if a timeval is zero
*/
BOOL timeval_is_zero(const struct timeval *tv)
@@ -406,7 +411,7 @@ BOOL timeval_is_zero(const struct timeval *tv)
return tv->tv_sec == 0 && tv->tv_usec == 0;
}
-/*
+/**
return a timeval for the current time
*/
struct timeval timeval_current(void)
@@ -416,7 +421,7 @@ struct timeval timeval_current(void)
return tv;
}
-/*
+/**
return a timeval struct with the given elements
*/
struct timeval timeval_set(uint32_t secs, uint32_t usecs)
@@ -428,7 +433,7 @@ struct timeval timeval_set(uint32_t secs, uint32_t usecs)
}
-/*
+/**
return a timeval ofs microseconds after tv
*/
struct timeval timeval_add(const struct timeval *tv,
@@ -443,7 +448,7 @@ struct timeval timeval_add(const struct timeval *tv,
return tv2;
}
-/*
+/**
return the sum of two timeval structures
*/
struct timeval timeval_sum(const struct timeval *tv1,
@@ -452,7 +457,7 @@ struct timeval timeval_sum(const struct timeval *tv1,
return timeval_add(tv1, tv2->tv_sec, tv2->tv_usec);
}
-/*
+/**
return a timeval secs/usecs into the future
*/
struct timeval timeval_current_ofs(uint32_t secs, uint32_t usecs)
@@ -461,7 +466,7 @@ struct timeval timeval_current_ofs(uint32_t secs, uint32_t usecs)
return timeval_add(&tv, secs, usecs);
}
-/*
+/**
compare two timeval structures.
Return -1 if tv1 < tv2
Return 0 if tv1 == tv2
@@ -476,7 +481,7 @@ int timeval_compare(const struct timeval *tv1, const struct timeval *tv2)
return 0;
}
-/*
+/**
return True if a timer is in the past
*/
BOOL timeval_expired(const struct timeval *tv)
@@ -487,7 +492,7 @@ BOOL timeval_expired(const struct timeval *tv)
return (tv2.tv_usec >= tv->tv_usec);
}
-/*
+/**
return the number of seconds elapsed between two times
*/
double timeval_elapsed2(const struct timeval *tv1, const struct timeval *tv2)
@@ -496,7 +501,7 @@ double timeval_elapsed2(const struct timeval *tv1, const struct timeval *tv2)
(tv2->tv_usec - tv1->tv_usec)*1.0e-6;
}
-/*
+/**
return the number of seconds elapsed since a given time
*/
double timeval_elapsed(const struct timeval *tv)
@@ -505,7 +510,7 @@ double timeval_elapsed(const struct timeval *tv)
return timeval_elapsed2(tv, &tv2);
}
-/*
+/**
return the lesser of two timevals
*/
struct timeval timeval_min(const struct timeval *tv1,
@@ -517,7 +522,7 @@ struct timeval timeval_min(const struct timeval *tv1,
return *tv2;
}
-/*
+/**
return the greater of two timevals
*/
struct timeval timeval_max(const struct timeval *tv1,
@@ -529,7 +534,7 @@ struct timeval timeval_max(const struct timeval *tv1,
return *tv2;
}
-/*
+/**
return the difference between two timevals as a timeval
if tv1 comes after tv2, then return a zero timeval
(this is *tv2 - *tv1)
@@ -552,7 +557,7 @@ struct timeval timeval_until(const struct timeval *tv1,
}
-/*
+/**
convert a timeval to a NTTIME
*/
NTTIME timeval_to_nttime(const struct timeval *tv)
@@ -579,9 +584,9 @@ static int tm_diff(struct tm *a, struct tm *b)
return seconds;
}
-/*******************************************************************
+/**
return the UTC offset in seconds west of UTC, or 0 if it cannot be determined
- ******************************************************************/
+ */
int get_time_zone(time_t t)
{
struct tm *tm = gmtime(&t);
diff --git a/source4/lib/util/unix_privs.c b/source4/lib/util/unix_privs.c
index 3c0f319776..13b0aa203c 100644
--- a/source4/lib/util/unix_privs.c
+++ b/source4/lib/util/unix_privs.c
@@ -23,6 +23,11 @@
#include "includes.h"
#include "system/filesys.h"
+/**
+ * @file
+ * @brief Gaining/losing root privileges
+ */
+
/*
there are times when smbd needs to temporarily gain root privileges
to do some operation. To do this you call root_privileges(), which
diff --git a/source4/lib/util/util.c b/source4/lib/util/util.c
index 17dde332e1..074dc000fb 100644
--- a/source4/lib/util/util.c
+++ b/source4/lib/util/util.c
@@ -28,10 +28,15 @@
#include "system/iconv.h"
#include "system/filesys.h"
-/***************************************************************************
+/**
+ * @file
+ * @brief Misc utility functions
+ */
+
+/**
Find a suitable temporary directory. The result should be copied immediately
as it may be overwritten by a subsequent call.
-****************************************************************************/
+**/
const char *tmpdir(void)
{
char *p;
@@ -41,9 +46,9 @@ const char *tmpdir(void)
}
-/*******************************************************************
+/**
Check if a file exists - call vfs_file_exist for samba files.
-********************************************************************/
+**/
BOOL file_exist(const char *fname)
{
struct stat st;
@@ -55,9 +60,9 @@ BOOL file_exist(const char *fname)
return ((S_ISREG(st.st_mode)) || (S_ISFIFO(st.st_mode)));
}
-/*******************************************************************
+/**
Check a files mod time.
-********************************************************************/
+**/
time_t file_modtime(const char *fname)
{
@@ -69,9 +74,9 @@ time_t file_modtime(const char *fname)
return(st.st_mtime);
}
-/*******************************************************************
+/**
Check if a directory exists.
-********************************************************************/
+**/
BOOL directory_exist(const char *dname)
{
@@ -167,12 +172,12 @@ static void close_low_fds(BOOL stderr_too)
#endif
}
-/****************************************************************************
+/**
Set a fd into blocking/nonblocking mode. Uses POSIX O_NONBLOCK if available,
else
if SYSV use O_NDELAY
if BSD use FNDELAY
-****************************************************************************/
+**/
int set_blocking(int fd, BOOL set)
{
@@ -198,9 +203,9 @@ int set_blocking(int fd, BOOL set)
}
-/*******************************************************************
+/**
Sleep for a specified number of milliseconds.
-********************************************************************/
+**/
void msleep(uint_t t)
{
@@ -213,9 +218,9 @@ void msleep(uint_t t)
select(0,NULL,NULL,NULL,&tval);
}
-/****************************************************************************
+/**
Become a daemon, discarding the controlling terminal.
-****************************************************************************/
+**/
void become_daemon(BOOL Fork)
{
@@ -244,11 +249,11 @@ void become_daemon(BOOL Fork)
}
-/****************************************************************************
+/**
Free memory, checks for NULL.
Use directly SAFE_FREE()
Exists only because we need to pass a function pointer somewhere --SSS
-****************************************************************************/
+**/
void safe_free(void *p)
{
@@ -256,7 +261,7 @@ void safe_free(void *p)
}
-/*
+/**
see if a string matches either our primary or one of our secondary
netbios aliases. do a case insensitive match
*/
@@ -280,9 +285,9 @@ BOOL is_myname(const char *name)
}
-/****************************************************************************
+/**
Get my own name, return in malloc'ed storage.
-****************************************************************************/
+**/
char* get_myname(void)
{
@@ -311,9 +316,9 @@ char* get_myname(void)
return hostname;
}
-/****************************************************************************
+/**
Return true if a string could be a pure IP address.
-****************************************************************************/
+**/
BOOL is_ipaddress(const char *str)
{
@@ -330,9 +335,9 @@ BOOL is_ipaddress(const char *str)
return pure_address;
}
-/****************************************************************************
+/**
Interpret an internet address or name into an IP address in 4 byte form.
-****************************************************************************/
+**/
uint32_t interpret_addr(const char *str)
{
struct hostent *hp;
@@ -375,9 +380,9 @@ uint32_t interpret_addr(const char *str)
return(res);
}
-/*******************************************************************
+/**
A convenient addition to interpret_addr().
-******************************************************************/
+**/
struct ipv4_addr interpret_addr2(const char *str)
{
struct ipv4_addr ret;
@@ -386,18 +391,18 @@ struct ipv4_addr interpret_addr2(const char *str)
return ret;
}
-/*******************************************************************
+/**
Check if an IP is the 0.0.0.0.
-******************************************************************/
+**/
BOOL is_zero_ip(struct ipv4_addr ip)
{
return ip.addr == 0;
}
-/*******************************************************************
+/**
Are two IPs on the same subnet?
-********************************************************************/
+**/
BOOL same_net(struct ipv4_addr ip1,struct ipv4_addr ip2,struct ipv4_addr mask)
{
@@ -411,9 +416,9 @@ BOOL same_net(struct ipv4_addr ip1,struct ipv4_addr ip2,struct ipv4_addr mask)
}
-/****************************************************************************
+/**
Check if a process exists. Does this work on all unixes?
-****************************************************************************/
+**/
BOOL process_exists(pid_t pid)
{
@@ -423,10 +428,10 @@ BOOL process_exists(pid_t pid)
return(kill(pid,0) == 0 || errno != ESRCH);
}
-/****************************************************************************
+/**
Simple routine to do POSIX file locking. Cruft in NFS and 64->32 bit mapping
is dealt with in posix.c
-****************************************************************************/
+**/
BOOL fcntl_lock(int fd, int op, off_t offset, off_t count, int type)
{
@@ -513,9 +518,9 @@ void dump_data(int level, const uint8_t *buf,int len)
}
}
-/*****************************************************************
+/**
malloc that aborts with smb_panic on fail or zero size.
- *****************************************************************/
+**/
void *smb_xmalloc(size_t size)
{
@@ -552,9 +557,9 @@ char *smb_xstrdup(const char *s)
}
-/*****************************************************************
+/**
Like strdup but for memory.
-*****************************************************************/
+**/
void *memdup(const void *p, size_t size)
{
@@ -568,9 +573,9 @@ void *memdup(const void *p, size_t size)
return p2;
}
-/*****************************************************************
+/**
A useful function for returning a path in the Samba lock directory.
-*****************************************************************/
+**/
char *lock_path(TALLOC_CTX* mem_ctx, const char *name)
{
char *fname, *dname;
@@ -596,9 +601,9 @@ char *lock_path(TALLOC_CTX* mem_ctx, const char *name)
}
-/*****************************************************************
+/**
A useful function for returning a path in the Samba piddir directory.
-*****************************************************************/
+**/
static char *pid_path(TALLOC_CTX* mem_ctx, const char *name)
{
char *fname, *dname;
@@ -654,7 +659,7 @@ char *private_path(TALLOC_CTX* mem_ctx, const char *name)
return fname;
}
-/*
+/**
return a path in the smbd.tmp directory, where all temporary file
for smbd go. If NULL is passed for name then return the directory
path itself
@@ -707,8 +712,10 @@ void dump_data_pw(const char *msg, const uint8_t * data, size_t len)
}
-/* see if a range of memory is all zero. A NULL pointer is considered
- to be all zero */
+/**
+ * see if a range of memory is all zero. A NULL pointer is considered
+ * to be all zero
+ */
BOOL all_zero(const uint8_t *ptr, uint_t size)
{
int i;
@@ -719,7 +726,7 @@ BOOL all_zero(const uint8_t *ptr, uint_t size)
return True;
}
-/*
+/**
realloc an array, checking for integer overflow in the array size
*/
void *realloc_array(void *ptr, size_t el_size, unsigned count)
diff --git a/source4/lib/util/util_file.c b/source4/lib/util/util_file.c
index 246b03b4aa..5e55b81873 100644
--- a/source4/lib/util/util_file.c
+++ b/source4/lib/util/util_file.c
@@ -24,11 +24,16 @@
#include "system/shmem.h"
#include "system/filesys.h"
-/****************************************************************************
+/**
+ * @file
+ * @brief File-related utility functions
+ */
+
+/**
read a line from a file with possible \ continuation chars.
Blanks at the start or end of a line are stripped.
The string will be allocated if s2 is NULL
-****************************************************************************/
+**/
char *fgets_slash(char *s2,int maxlen,XFILE *f)
{
char *s=s2;
@@ -98,7 +103,9 @@ char *fgets_slash(char *s2,int maxlen,XFILE *f)
return(s);
}
-/* Read one line (data until next newline or eof) and allocate it */
+/**
+ * Read one line (data until next newline or eof) and allocate it
+ */
char *afdgets(int fd, TALLOC_CTX *mem_ctx, size_t hint)
{
char *data = NULL;
@@ -146,9 +153,9 @@ char *afdgets(int fd, TALLOC_CTX *mem_ctx, size_t hint)
}
-/****************************************************************************
+/**
load a file into memory from a fd.
-****************************************************************************/
+**/
char *fd_load(int fd, size_t *size, TALLOC_CTX *mem_ctx)
{
@@ -171,9 +178,9 @@ char *fd_load(int fd, size_t *size, TALLOC_CTX *mem_ctx)
return p;
}
-/****************************************************************************
+/**
load a file into memory
-****************************************************************************/
+**/
char *file_load(const char *fname, size_t *size, TALLOC_CTX *mem_ctx)
{
int fd;
@@ -192,9 +199,9 @@ char *file_load(const char *fname, size_t *size, TALLOC_CTX *mem_ctx)
}
-/*******************************************************************
+/**
mmap (if possible) or read a file
-********************************************************************/
+**/
void *map_file(const char *fname, size_t size)
{
size_t s2 = 0;
@@ -228,9 +235,9 @@ void *map_file(const char *fname, size_t size)
}
-/****************************************************************************
+/**
parse a buffer into lines
-****************************************************************************/
+**/
static char **file_lines_parse(char *p, size_t size, int *numlines, TALLOC_CTX *mem_ctx)
{
int i;
@@ -267,10 +274,10 @@ static char **file_lines_parse(char *p, size_t size, int *numlines, TALLOC_CTX *
}
-/****************************************************************************
+/**
load a file into memory and return an array of pointers to lines in the file
must be freed with talloc_free().
-****************************************************************************/
+**/
char **file_lines_load(const char *fname, int *numlines, TALLOC_CTX *mem_ctx)
{
char *p;
@@ -287,11 +294,11 @@ char **file_lines_load(const char *fname, int *numlines, TALLOC_CTX *mem_ctx)
return lines;
}
-/****************************************************************************
+/**
load a fd into memory and return an array of pointers to lines in the file
must be freed with talloc_free(). If convert is true calls unix_to_dos on
the list.
-****************************************************************************/
+**/
char **fd_lines_load(int fd, int *numlines, TALLOC_CTX *mem_ctx)
{
char *p;
@@ -309,10 +316,10 @@ char **fd_lines_load(int fd, int *numlines, TALLOC_CTX *mem_ctx)
}
-/****************************************************************************
+/**
take a list of lines and modify them to produce a list where \ continues
a line
-****************************************************************************/
+**/
void file_lines_slashcont(char **lines)
{
int i, j;
@@ -332,7 +339,7 @@ void file_lines_slashcont(char **lines)
}
}
-/*
+/**
save a lump of data into a file. Mostly used for debugging
*/
BOOL file_save(const char *fname, const void *packet, size_t length)
@@ -349,7 +356,7 @@ BOOL file_save(const char *fname, const void *packet, size_t length)
return True;
}
-/*
+/**
see if a file exists
*/
BOOL file_exists(const char *path)
diff --git a/source4/lib/util/util_sock.c b/source4/lib/util/util_sock.c
index 8a65a27d02..e3913f56a9 100644
--- a/source4/lib/util/util_sock.c
+++ b/source4/lib/util/util_sock.c
@@ -22,6 +22,11 @@
#include "includes.h"
#include "system/network.h"
+/**
+ * @file
+ * @brief Socket utility functions
+ */
+
enum SOCK_OPT_TYPES {OPT_BOOL,OPT_INT,OPT_ON};
static const struct {
@@ -67,9 +72,9 @@ static const struct {
{NULL,0,0,0,0}};
-/****************************************************************************
+/**
Set user socket options.
-****************************************************************************/
+**/
void set_socket_options(int fd, const char *options)
{
const char **options_list = str_list_make(NULL, options, " \t,");
diff --git a/source4/lib/util/util_str.c b/source4/lib/util/util_str.c
index b46787e3ea..11a95731de 100644
--- a/source4/lib/util/util_str.c
+++ b/source4/lib/util/util_str.c
@@ -983,10 +983,10 @@ size_t valgrind_strlen(const char *s)
#endif
-/*
+/**
format a string into length-prefixed dotted domain format, as used in NBT
and in some ADS structures
-*/
+**/
const char *str_format_nbt_domain(TALLOC_CTX *mem_ctx, const char *s)
{
char *ret;
@@ -1036,9 +1036,9 @@ BOOL add_string_to_array(TALLOC_CTX *mem_ctx,
-/*
+/**
varient of strcmp() that handles NULL ptrs
-*/
+**/
int strcmp_safe(const char *s1, const char *s2)
{
if (s1 == s2) {
@@ -1051,11 +1051,11 @@ int strcmp_safe(const char *s1, const char *s2)
}
-/*******************************************************************
+/**
return the number of bytes occupied by a buffer in ASCII format
the result includes the null termination
limited by 'n' bytes
-********************************************************************/
+**/
size_t ascii_len_n(const char *src, size_t n)
{
size_t len;
@@ -1069,9 +1069,9 @@ size_t ascii_len_n(const char *src, size_t n)
}
-/*******************************************************************
+/**
Return a string representing a CIFS attribute for a file.
-********************************************************************/
+**/
char *attrib_string(TALLOC_CTX *mem_ctx, uint32_t attrib)
{
int i, len;
@@ -1113,11 +1113,11 @@ char *attrib_string(TALLOC_CTX *mem_ctx, uint32_t attrib)
return ret;
}
-/***************************************************************************
+/**
Set a boolean variable from the text value stored in the passed string.
Returns True in success, False if the passed string does not correctly
represent a boolean.
-***************************************************************************/
+**/
BOOL set_boolean(const char *boolean_string, BOOL *boolean)
{
@@ -1155,7 +1155,9 @@ BOOL conv_str_bool(const char * str, BOOL * val)
return True;
}
-/* Convert a size specification like 16K into an integral number of bytes. */
+/**
+ * Convert a size specification like 16K into an integral number of bytes.
+ **/
BOOL conv_str_size(const char * str, uint64_t * val)
{
char * end = NULL;
diff --git a/source4/lib/util/util_strlist.c b/source4/lib/util/util_strlist.c
index ec6c58162f..e3d5126029 100644
--- a/source4/lib/util/util_strlist.c
+++ b/source4/lib/util/util_strlist.c
@@ -21,7 +21,12 @@
#include "includes.h"
-/*
+/**
+ * @file
+ * @brief String list manipulation
+ */
+
+/**
build a null terminated list of strings from a input string and a
separator list. The separator list must contain characters less than
or equal to 0x2f for this to work correctly on multi-byte strings
@@ -71,9 +76,10 @@ const char **str_list_make(TALLOC_CTX *mem_ctx, const char *string, const char *
return ret;
}
-/* build a null terminated list of strings from an argv-like input string
- Entries are seperated by spaces and can be enclosed by quotes.
- Does NOT support escaping
+/**
+ * build a null terminated list of strings from an argv-like input string
+ * Entries are seperated by spaces and can be enclosed by quotes.
+ * Does NOT support escaping
*/
const char **str_list_make_shell(TALLOC_CTX *mem_ctx, const char *string, const char *sep)
{
@@ -131,7 +137,9 @@ const char **str_list_make_shell(TALLOC_CTX *mem_ctx, const char *string, const
}
-/* join a list back to one string */
+/**
+ * join a list back to one string
+ */
char *str_list_join(TALLOC_CTX *mem_ctx, const char **list, char seperator)
{
char *ret = NULL;
@@ -149,7 +157,7 @@ char *str_list_join(TALLOC_CTX *mem_ctx, const char **list, char seperator)
return ret;
}
-/* join a list back to one (shell-like) string; entries
+/** join a list back to one (shell-like) string; entries
* seperated by spaces, using quotes where necessary */
char *str_list_join_shell(TALLOC_CTX *mem_ctx, const char **list, char sep)
{
@@ -174,7 +182,7 @@ char *str_list_join_shell(TALLOC_CTX *mem_ctx, const char **list, char sep)
return ret;
}
-/*
+/**
return the number of elements in a string list
*/
size_t str_list_length(const char **list)
@@ -185,7 +193,7 @@ size_t str_list_length(const char **list)
}
-/*
+/**
copy a string list
*/
const char **str_list_copy(TALLOC_CTX *mem_ctx, const char **list)
@@ -205,7 +213,7 @@ const char **str_list_copy(TALLOC_CTX *mem_ctx, const char **list)
return ret;
}
-/*
+/**
Return true if all the elements of the list match exactly.
*/
BOOL str_list_equal(const char **list1, const char **list2)
@@ -228,7 +236,7 @@ BOOL str_list_equal(const char **list1, const char **list2)
}
-/*
+/**
add an entry to a string list
*/
const char **str_list_add(const char **list, const char *s)
@@ -247,7 +255,7 @@ const char **str_list_add(const char **list, const char *s)
return ret;
}
-/*
+/**
remove an entry from a string list
*/
void str_list_remove(const char **list, const char *s)
@@ -265,7 +273,7 @@ void str_list_remove(const char **list, const char *s)
}
-/*
+/**
return True if a string is in a list
*/
BOOL str_list_check(const char **list, const char *s)
@@ -278,7 +286,7 @@ BOOL str_list_check(const char **list, const char *s)
return False;
}
-/*
+/**
return True if a string is in a list, case insensitively
*/
BOOL str_list_check_ci(const char **list, const char *s)
diff --git a/source4/lib/util/util_unistr.c b/source4/lib/util/util_unistr.c
index b35822877c..81aa0d6752 100644
--- a/source4/lib/util/util_unistr.c
+++ b/source4/lib/util/util_unistr.c
@@ -22,6 +22,11 @@
#include "includes.h"
#include "system/iconv.h"
+/**
+ * @file
+ * @brief Unicode string manipulation
+ */
+
/* these 2 tables define the unicode case handling. They are loaded
at startup either via mmap() or read() from the lib directory */
static void *upcase_table;
@@ -58,9 +63,9 @@ static void load_case_tables(void)
}
}
-/*******************************************************************
+/**
Convert a codepoint_t to upper case.
-********************************************************************/
+**/
codepoint_t toupper_w(codepoint_t val)
{
if (val < 128) {
@@ -78,9 +83,9 @@ codepoint_t toupper_w(codepoint_t val)
return SVAL(upcase_table, val*2);
}
-/*******************************************************************
+/**
Convert a codepoint_t to lower case.
-********************************************************************/
+**/
codepoint_t tolower_w(codepoint_t val)
{
if (val < 128) {
@@ -98,10 +103,10 @@ codepoint_t tolower_w(codepoint_t val)
return SVAL(lowcase_table, val*2);
}
-/*******************************************************************
+/**
return the number of bytes occupied by a buffer in CH_UTF16 format
the result includes the null termination
-********************************************************************/
+**/
size_t utf16_len(const void *buf)
{
size_t len;
@@ -111,11 +116,11 @@ size_t utf16_len(const void *buf)
return len + 2;
}
-/*******************************************************************
+/**
return the number of bytes occupied by a buffer in CH_UTF16 format
the result includes the null termination
limited by 'n' bytes
-********************************************************************/
+**/
size_t utf16_len_n(const void *src, size_t n)
{
size_t len;
@@ -137,7 +142,7 @@ size_t ucs2_align(const void *base_ptr, const void *p, int flags)
return PTR_DIFF(p, base_ptr) & 1;
}
-/*
+/**
compare two codepoints case insensitively
*/
int codepoint_cmpi(codepoint_t c1, codepoint_t c2)
diff --git a/source4/lib/util/xfile.c b/source4/lib/util/xfile.c
index 794e3f0f5e..43f0f85f52 100644
--- a/source4/lib/util/xfile.c
+++ b/source4/lib/util/xfile.c
@@ -18,6 +18,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/**
+ * @file
+ * @brief scalable FILE replacement
+ */
+
/*
stdio is very convenient, but on some systems the file descriptor
in FILE* is 8 bits, so it fails when more than 255 files are open.