summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--packaging/Mandrake/samba2.spec.tmpl~1720
1 files changed, 0 insertions, 1720 deletions
diff --git a/packaging/Mandrake/samba2.spec.tmpl~ b/packaging/Mandrake/samba2.spec.tmpl~
deleted file mode 100644
index 616756a36f..0000000000
--- a/packaging/Mandrake/samba2.spec.tmpl~
+++ /dev/null
@@ -1,1720 +0,0 @@
-%define pkg_name samba
-%define ver 2.2.5
-%define rel 17mdk
-%define vscanver 0.2.5c
-
-# Determine whether this is the system samba or not.
-%define build_system 0
-%if %build_system
-%define samba_major %{null}
-%else
-%define samba_major 3
-%global _iconsdir %{_datadir}/icons/
-%global _miconsdir %{_datadir}/icons/mini
-%global _liconsdir %{_datadir}/icons/large
-%global _menudir %{_libdir}/menu
-#%%%%global __prefix /opt/samba%{samba_major}
-
-%global _mandir %{_datadir}/man
-%endif
-
-# 2.2.4 and 1 replace by samba-team at release
-%define pversion 3.0alpha20
-%define prelease 3
-# For testing this setup:
-#%define pversion1 2.2.5
-#%define prelease1 %(date +%Y%m%d)
-
-#Check to see if p(version|release) has been replaced (1 if replaced)
-%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
-%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
-
-# We might have a prerelease:
-%define have_pre %(echo %pversion|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
-%if %have_pre
-%define pre_ver %(perl -e '$name="%pversion"; print ($name =~ /(.*?)[a-z]/);')
-%define pre_pre %(echo %pversion|sed -e 's/%pre_ver//g')
-%endif
-
-
-# Check to see if we are running a build from a tarball release from samba.org
-# (%have_pversion) If so, disable vscan, unless explicitly requested
-# (--with vscan).
-%define build_vscan 1
-%if %have_pversion
-%define build_vscan 0
-%{?_with_vscan: %define build_vscan 1}
-%endif
-
-# We now do detection of the Mandrake release we are building on:
-#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi)
-#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi)
-%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi)
-%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi)
-%define build_mdk83 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.3 ];then echo 1; else echo 0; fi)
-%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
-%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
-%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
-%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
-%define build_non_default 0
-
-# Default options
-%define build_acl 1
-%define build_winbind 1
-%define build_wins 1
-%define build_ldap 1
-%define build_ads 1
-
-# Set defaults for each version
-%if %build_mdk91
-%endif
-
-%if %build_mdk90
-%endif
-
-%if %build_mdk83
-%endif
-
-%if %build_mdk82
-%endif
-
-%if %build_mdk81
-%define build_winbind 0
-%define build_wins 0
-%endif
-
-%if %build_mdk80
-%define build_acl 0
-%define build_winbind 0
-%define build_wins 0
-%endif
-
-%if %build_mdk72
-%define build_acl 0
-%define build_winbind 0
-%define build_wins 0
-%endif
-
-# Allow commandline option overrides (borrowed from Vince's qmail srpm):
-# To use it, do rpm [-ba|--rebuild] --with 'xxx'
-# Check if the rpm was built with the defaults, otherwise we inform the user
-%define build_non_default 0
-%{?_with_acl: %{expand: %%define build_acl 1}}
-%{?_with_acl: %{expand: %%define build_non_default 1}}
-%{?_without_acl: %{expand: %%define build_acl 0}}
-%{?_without_acl: %{expand: %%define build_non_default 1}}
-%{?_with_winbind: %{expand: %%global build_winbind 1}}
-%{?_with_winbind: %{expand: %%define build_non_default 1}}
-%{?_without_winbind: %{expand: %%define build_winbind 0}}
-%{?_without_winbind: %{expand: %%define build_non_default 1}}
-%{?_with_wins: %{expand: %%global build_wins 1}}
-%{?_with_wins: %{expand: %%define build_non_default 1}}
-%{?_without_wins: %{expand: %%global build_wins 0}}
-%{?_without_wins: %{expand: %%define build_non_default 1}}
-%{?_with_ldap: %{expand: %%global build_ldap 1}}
-%{?_with_ldap: %{expand: %%define build_non_default 1}}
-%{?_without_ldap: %{expand: %%global build_ldap 0}}
-%{?_without_ldap: %{expand: %%define build_non_default 1}}
-%{?_with_ads: %{expand: %%define build_ads 1}}
-%{?_with_ads: %{expand: %%define build_non_default 1}}
-%{?_without_ads: %{expand: %%define build_ads 0}}
-%{?_without_ads: %{expand: %%define build_non_default 1}}
-
-# As if that weren't enough, we're going to try building with antivirus
-# support as an option also
-%define build_fprot 0
-%define build_kaspersky 0
-%define build_mks 0
-%define build_openantivirus 0
-%define build_sophos 0
-%define build_symantec 0
-%define build_trend 0
-%if %build_vscan
-%{?_with_fprot: %{expand: %%global build_fprot 1}}
-%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
-%{?_with_mks: %{expand: %%global build_mks 1}}
-%{?_with_openav: %{expand: %%global build_openantivirus 1}}
-%{?_with_sophos: %{expand: %%global build_sophos 1}}
-%{?_with_symantec: %{expand: %%global build_symantec 1}}
-%{?_with_trend: %{expand: %%global build_trend 1}}
-%define vscandir "samba-vscan-%{vscanver}"
-%endif
-%define vfsdir "examples.bin/VFS"
-
-#Workaround missing macros in 8.x:
-%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
-
-Summary: Samba SMB server.
-Name: %{pkg_name}%{samba_major}
-%if %have_pversion && %have_pre
-Version: %{pre_ver}
-%define source_ver %{pversion}
-%endif
-%if %have_pversion && !%have_pre
-Version: %{pversion}
-%define source_ver %{pversion}
-%endif
-%if !%have_pversion
-Version: %{ver}
-%define source_ver %{ver}
-%endif
-%if %have_prelease && !%have_pre
-Release: 1.%{prelease}mdk
-%endif
-%if %have_prelease && %have_pre
-Release: 0.%{pre_pre}.%{prelease}mdk
-%endif
-%if !%have_prelease
-Release: %{rel}
-%endif
-License: GPL
-Group: System/Servers
-Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
-URL: http://www.samba.org
-Source1: samba.log
-Source2: mount.smb
-Source3: samba.xinetd
-Source4: swat_48.xpm.bz2
-Source5: swat_32.xpm.bz2
-Source6: swat_16.xpm.bz2
-Source7: README.%{name}-mandrake-rpm
-%if %build_vscan
-Source8: samba-vscan-%{vscanver}.tar.bz2
-%endif
-Source10: samba-print-pdf.sh.bz2
-Patch1: smbw.patch.bz2
-Patch2: samba-glibc21.patch.bz2
-#Patch3: network-recycle_bin.patch.bz2
-Patch5: samba-2.2.0-gawk.patch.bz2
-Patch12: samba-2.2.0-buildroot.patch.bz2
-#Patch16: samba-mkdir.patch.bz2
-Patch17: samba-3.0-smbmount-sbin.patch.bz2
-#Patches 20-22 to get packaging synced from 2.2.2 to 3.0
-Patch20: samba-3.0-smb.conf.patch.bz2
-Patch21: samba-3.0-winbind.init.patch.bz2
-Patch22: samba-3.0-system-auth-winbind.patch.bz2
-Patch23: samba-3alpha20-destdir.patch.bz2
-#Patch24: samba-3.0alpha13-installman.patch.bz2
-Patch25: samba-3.0alpha13-config_lang.patch.bz2
-#Patch 26 belongs with 20-22
-Patch26: samba-3.0-smb.init.patch.bz2
-Requires: pam >= 0.64, samba-common = %{version}
-BuildRequires: pam-devel autoconf readline-devel
-%if %build_acl
-BuildRequires: libacl-devel
-%endif
-%if %build_mdk72
-BuildRequires: cups-devel
-%else
-BuildRequires: libcups-devel
-%endif
-%if %build_ldap
-BuildRequires: libldap-devel
-%endif
-%if %build_ads
-BuildRequires: libldap-devel krb5-devel
-%endif
-BuildRoot: %{_tmppath}/%{name}-root
-Prefix: /usr
-Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
-Prereq: fileutils sed /bin/grep
-
-%description
-Samba provides an SMB server which can be used to provide
-network services to SMB (sometimes called "Lan Manager")
-clients, including various versions of MS Windows, OS/2,
-and other Linux machines. Samba also provides some SMB
-clients, which complement the built-in SMB filesystem
-in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
-and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
-protocol.
-
-Samba-3.0 features working NT Domain Control capability and
-includes the SWAT (Samba Web Administration Tool) that
-allows samba's smb.conf file to be remotely managed using your
-favourite web browser. For the time being this is being
-enabled on TCP port 901 via xinetd. SWAT is now included in
-it's own subpackage, samba-swat.
-
-Please refer to the WHATSNEW.txt document for fixup information.
-This binary release includes encrypted password support.
-
-Please read the smb.conf file and ENCRYPTION.txt in the
-docs directory for implementation details.
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%if %build_non_default
-WARNING: This RPM was built with command-line options. Please
-see README.%{name}-mandrake-rpm in the documentation for
-more information.
-%endif
-
-%package server
-URL: http://www.samba.org
-Summary: Samba (SMB) server programs.
-Requires: %{name}-common = %{version}
-Group: Networking/Other
-Provides: samba
-Obsoletes: samba
-%if %build_system
-Obsoletes: samba-server-ldap
-Obsoletes: samba3-server
-%else
-Provides: samba-server
-%endif
-
-%description server
-Samba-server provides a SMB server which can be used to provide
-network services to SMB (sometimes called "Lan Manager")
-clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
-and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
-protocol.
-
-Samba-3.0 features working NT Domain Control capability and
-includes the SWAT (Samba Web Administration Tool) that
-allows samba's smb.conf file to be remotely managed using your
-favourite web browser. For the time being this is being
-enabled on TCP port 901 via xinetd. SWAT is now included in
-it's own subpackage, samba-swat.
-
-Please refer to the WHATSNEW.txt document for fixup information.
-This binary release includes encrypted password support.
-
-Please read the smb.conf file and ENCRYPTION.txt in the
-docs directory for implementation details.
-
-%if %build_ldap
-This package was compiled with LDAP support, which means that
-passwords can be stored in LDAP or in smbpasswd files.
-To migrate your passwords from smbpasswd into LDAP, try
-examples/LDAP/import_smbpasswd.pl using:
-%{_datadir}/%{name}/scripts/import_smbpasswd.pl </etc/%{name}/smbpasswd
-
-Scripts for managing users in LDAP have been added to
-%{_datadir}/%{name}/scripts, configuration is in /etc/%{name}/smbldap_conf.pm
-%endif
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%package client
-URL: http://www.samba.org
-Summary: Samba (SMB) client programs.
-Group: Networking/Other
-Requires: %{name}-common = %{version}
-Obsoletes: smbfs
-%if %build_system
-Obsoletes: samba3-client
-%else
-Provides: samba-client
-%endif
-
-%description client
-Samba-client provides some SMB clients, which complement the built-in
-SMB filesystem in Linux. These allow the accessing of SMB shares, and
-printing to SMB printers.
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%package common
-URL: http://www.samba.org
-Summary: Files used by both Samba servers and clients.
-Group: System/Servers
-%if %build_system
-Obsoletes: samba-common-ldap
-Obsoletes: samba3-common
-%else
-Provides: samba-common
-%endif
-
-%description common
-Samba-common provides files necessary for both the server and client
-packages of Samba.
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%package doc
-URL: http://www.samba.org
-Summary: Documentation for Samba servers and clients.
-Group: System/Servers
-Requires: %{name}-common = %{version}
-%if %build_system
-Obsoletes: samba3-doc
-%else
-Provides: samba-doc
-%endif
-
-%description doc
-Samba-doc provides documentation files for both the server and client
-packages of Samba.
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%package swat
-URL: http://www.samba.org
-Summary: The Samba Web Administration Tool.
-Requires: %{name}-server = %{version}
-Requires: xinetd
-Group: System/Servers
-%if %build_system
-Obsoletes: samba-swat-ldap
-Obsoletes: samba3-swat
-%else
-Provides: samba-swat
-%endif
-
-%description swat
-SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
-to be remotely managed using your favourite web browser. For the time
-being this is being enabled on TCP port 901 via xinetd. Note that
-SWAT does not use SSL encryption, nor does it preserve comments in
-your smb.conf file. Webmin uses SSL encryption by default, and
-preserves comments in configuration files, even if it does not display
-them, and is therefore the preferred method for remotely managing
-Samba.
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%if %build_winbind
-%package winbind
-URL: http://www.samba.org
-Summary: Samba-winbind daemon, utilities and documentation
-Group: System/Servers
-Requires: %{name}-common = %{version}
-%description winbind
-Provides the winbind daemon and testing tools to allow authentication
-and group/user enumeration from a Windows or Samba domain controller.
-%endif
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-%if %build_wins
-%package -n nss_wins%{samba_major}
-URL: http://www.samba.org
-Summary: Name Service Switch service for WINS
-Group: System/Servers
-Requires: %{name}-common = %{version}
-PreReq: glibc
-%description -n nss_wins%{samba_major}
-Provides the libnss_wins shared library which resolves NetBIOS names to
-IP addresses.
-%endif
-
-%if !%build_system
-NOTE: This is a prerelease of samba-%{samba_major}, not intended
-for production use. If something breaks, file a bug report.
-%endif
-
-#Antivirus packages:
-%if %build_fprot
-%package vscan-fprot
-Summary: On-access virus scanning for samba using FPROT
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-fprot
-A vfs-module for samba to implement on-access scanning using the
-FPROT antivirus software (which must be installed to use this).
-%endif
-
-%if %build_kaspersky
-%package vscan-kaspersky
-Summary: On-access virus scanning for samba using Kaspersky
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-kaspersky
-A vfs-module for samba to implement on-access scanning using the
-Kaspersky antivirus software (which must be installed to use this).
-%endif
-
-%if %build_mks
-%package vscan-mks
-Summary: On-access virus scanning for samba using MKS
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-mks
-A vfs-module for samba to implement on-access scanning using the
-MKS antivirus software (which must be installed to use this).
-%endif
-
-%if %build_openantivirus
-%package vscan-openantivirus
-Summary: On-access virus scanning for samba using OpenAntivirus
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-openantivirus
-A vfs-module for samba to implement on-access scanning using the
-OpenAntivirus antivirus software (which must be installed to use this).
-%endif
-
-%if %build_sophos
-%package vscan-sophos
-Summary: On-access virus scanning for samba using Sophos
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-sophos
-A vfs-module for samba to implement on-access scanning using the
-Sophos antivirus software (which must be installed to use this).
-%endif
-
-%if %build_symantec
-%package vscan-symantec
-Summary: On-access virus scanning for samba using Symantec
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-symantec
-A vfs-module for samba to implement on-access scanning using the
-Symantec antivirus software (which must be installed to use this).
-%endif
-
-%if %build_trend
-%package vscan-trend
-Summary: On-access virus scanning for samba using Trend
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Autoreq: 0
-%description vscan-trend
-A vfs-module for samba to implement on-access scanning using the
-Trend antivirus software (which must be installed to use this).
-%endif
-
-%prep
-# Build a summary of how this RPM was built:
-%if %build_acl
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with acl"
-%else
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without acl"
-%endif
-%if %build_winbind
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with winbind"
-%else
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without winbind"
-%endif
-%if %build_wins
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with wins"
-%else
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without wins"
-%endif
-%if %build_ldap
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ldap"
-%else
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ldap"
-%endif
-%if %build_ads
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ads"
-%else
-RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ads"
-%endif
-
-%if %build_non_default
-echo "Building a non-default rpm with the following command-line arguments:"
-echo "$RPM_EXTRA_OPTIONS"
-echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
-echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
-echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
-echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
-%else
-echo "This rpm was built with default options">%{SOURCE7}
-echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
-%endif
-
-%if %build_vscan
-%setup -q -a 8 -n %{pkg_name}-%{source_ver}
-%else
-%setup -q -n %{pkg_name}-%{source_ver}
-%endif
-#%patch111 -p1
-%patch1 -p1 -b .smbw
-#%patch3 -p1 -b .net-r_bin
-%patch5 -p1 -b .gawk
-#%patch6 -p1
-%patch12 -p1 -b .buildroot
-%patch17 -p1 -b .sbin
-%patch20 -p1 -b .samba222
-%patch21 -p1 -b .samba222
-%patch22 -p1 -b .samba222
-%patch23 -p1 -b .destdir
-#%patch24 -p1 -b .langen
-%patch25 -p1 -b .multilang
-%patch26 -p1 -b .samba222
-cp %{SOURCE7} .
-
-# Make a copy of examples so that we have a clean one for doc:
-cp -a examples examples.bin
-
-%if %build_vscan
-# put antivirus files in examples.bin/VFS/
-for av in fprot kaspersky mks openantivirus sophos symantec trend; do
- cp -a %{vscandir}/$av %{vfsdir}
-done
-%endif
-
-# Edit some files when not building system samba:
-%if !%build_system
-perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
-%endif
-
-%build
-#%serverbuild
-(cd source
-autoconf
-CPPFLAGS="-I/usr/include/openssl"; export CPPFLAGS
-CFLAGS="$RPM_OPT_FLAGS"
-%configure --prefix=%{_prefix} \
- --with-fhs \
- --libdir=/etc/%{name} \
- --sysconfdir=/etc/%{name} \
- --localstatedir=/var \
- --with-configdir=/etc/%{name} \
- --with-codepagedir=/var/lib/%{name}/codepages \
- --with-privatedir=/etc/%{name} \
- --with-swatdir=%{_datadir}/swat%{samba_major} \
- --with-smbmount \
- --with-syslog \
- --with-automount \
- --with-pam \
- --with-vfs \
- --with-utmp \
- --with-msdfs \
- --with-smbwrapper \
- --with-manpages-langs=en \
- --with-logfilebase=/var/log/%{name} \
- --with-lockdir=/var/cache/%{name} \
- --with-piddir=/var/run/%{name} \
-%if !%build_system
- --program-suffix=%{samba_major} \
-%endif
-%if %build_acl
- --with-acl-support \
-%endif
-%if !%build_ldap
- --with-ldap=no \
-%endif
-%if !%build_ads
- --with-ads=no \
-%endif
- --with-quotas
-# --with-pam_smbpass \
-# --with-manpages-langs=en,ja,pl \
-
-#make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" all
-make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" \
- all smbfilter smbwrapper smbcacls pam_smbpass nsswitch nsswitch/libnss_wins.so debug2html
-# Build VFS modules (experimental)
-cd ../%vfsdir
-%configure --prefix=%{prefix} \
- --mandir=%{prefix}/share/man
-make
-#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \
-# -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
-)
-
-# Build mkntpasswd in examples/LDAP/ for smbldaptools
-(
-cd examples.bin/LDAP/smbldap-tools/mkntpwd
-make
-)
-
-# Build antivirus vfs objects:
-%if %build_fprot
-echo "Building fprot"
-%endif
-%if %build_kaspersky
-echo "Building Kaspersky"
-(cd %{vfsdir}/kaspersky;make)
-%endif
-%if %build_mks
-echo "Building mks"
-(cd %{vfsdir}/mks;make)
-%endif
-%if %build_openantivirus
-echo "Building OpenAntivirus"
-(cd %{vfsdir}/openantivirus;make)
-%endif
-%if %build_sophos
-echo "building sophos"
-(cd %{vfsdir}/sophos;make)
-%endif
-%if %build_symantec
-echo "Building symantec"
-(cd %{vfsdir}/symantec;make)
-%endif
-%if %build_trend
-echo "Building Trend"
-(cd %{vfsdir}/trend;make)
-%endif
-
-%install
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT
-
-# Any entries here mean samba makefile is *really* broken:
-mkdir -p $RPM_BUILD_ROOT/etc/%{name}
-mkdir -p $RPM_BUILD_ROOT/%{_datadir}
-
-(cd source
-make DESTDIR=$RPM_BUILD_ROOT install)
-
-#need to stay
-mkdir -p $RPM_BUILD_ROOT/sbin
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d}
-mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
-mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/{netlogon,profiles,printers}
-mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
-mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/codepages/src
-mkdir -p $RPM_BUILD_ROOT/lib/security
-mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
-mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
-
-#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
-install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
-#install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security/pam_smbpass.so
-install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/lib/security/pam_winbind%{samba_major}.so
-
-# Install VFS modules
-#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
-#for i in block recycle
-#do
-# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
-#done
-
-# Antivirus support:
-# mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan
- for av in fprotd kavp mksd oav sophos symantec trend; do
- if [ -d %{vfsdir}/$av -a -e %{vfsdir}/$av/vscan-$av.so ];then
- cp %{vfsdir}/$av/vscan-$av.so \
- $RPM_BUILD_ROOT%{_libdir}/samba/vfs/
- fi
- done
-
-#These scripts are not handled by make:
-#for i in addtosmbpass mksmbpasswd.sh smbtar convert_smbpasswd
-for i in addtosmbpass mksmbpasswd.sh convert_smbpasswd
-do
- install -m755 source/script/$i $RPM_BUILD_ROOT/%{_bindir}
-done
-
-#libnss_* not handled by make:
-# Install the nsswitch library extension file
-for i in wins winbind; do
- install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/lib/libnss_${i}%{samba_major}.so
-done
-# Make link for wins and winbind resolvers
-( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2)
-
-# Install other stuff
-
-# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/
- install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf
- install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers
- install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
- #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
- install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
- install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major}
- install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
- install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major}
- install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major}
- install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name}
- install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
-#
- install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/%{name}
-# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
-
-# Install smbldap-tools scripts:
-#for i in examples/LDAP/smbldap-tools/*.pl; do
-# install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-#done
-
-#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-
-# The conf file
-#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
-
-# Link both smbldap*.pm into vendor-perl (any better ideas?)
-#mkdir -p %{buildroot}/%{perl_vendorlib}
-#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
-#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
-
-#mkntpwd
-#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}
-
-# Samba smbpasswd migration script:
-install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-
-
-
-# make a conf file for winbind from the default one:
- cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf
- install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
-
-# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
-#I don't think it's possible for make to do this ...
- ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smb%{samba_major}
- ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smbfs%{samba_major}
- echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts
-
-# Link smbspool to CUPS (does not require installed CUPS)
-
- mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
- ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major}
-
-# xinetd support
-
- mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
- install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
-
-# menu support
-
-mkdir -p $RPM_BUILD_ROOT%{_menudir}
-cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF
-?package(%{name}):command="gnome-moz-remote http://localhost:901/" needs="gnome" \
-icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
-longtitle="The Swat Samba Administration Tool"
-?package(%{name}):command="sh -c '\$BROWSER http://localhost:901/'" needs="x11" \
-icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
-longtitle="The Swat Samba Administration Tool"
-EOF
-
-mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
-
-bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.xpm
-bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.xpm
-bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.xpm
-
-bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
-
-# Fix configs when not building system samba:
-%if !%build_system
-# Work around non-existent but claimed --program-suffix support :-(
-for dir in %{_sbindir} %{_bindir};do
- FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$`
- for OLD in $FILES; do
- NEW=`echo ${OLD}%{samba_major}`
- mv $OLD $NEW
- done
-done
-# And the man pages too:
-FILES=`find %{buildroot}%{_mandir} -type f `
-for OLD in $FILES; do
- BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
- EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
- NEW=`echo ${BASE}%{samba_major}${EXT}`
- mv $OLD $NEW
-done
-# Replace paths in config files and init scripts:
-for i in smb winbind;do
- perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major}
-done
-for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major}; do
- perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g' $RPM_BUILD_ROOT/$i;
-done
-# Fix pam files
-perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
-# Fix xinetd file for swat:
-perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
-%endif
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post server
-
-/sbin/chkconfig --level 35 smb%{samba_major} on
-
-# Add a unix group for samba machine accounts
-groupadd -frg 421 machines
-
-# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
-for i in /var/lock/samba/*.tdb
-do
-if [ -f $i ]; then
- newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
- echo "Moving $i to $newname"
- mv $i $newname
-fi
-done
-
-# Remove the transient tdb files (modified from version in off. samba spec:
-for TDB in brlock unexpected locking messages; do
- if [ -e /var/cache/%{name}/$TDB.tdb ]; then
- rm -f /var/cache/%{name}/$TDB.tdb;
- fi;
-done
-
-if [ -d /var/lock/samba ]; then
- rm -rf /var/lock/samba
-fi
-
-%post common
-# Basic migration script for pre-2.2.1 users,
-# since smb config moved from /etc to /etc/samba
-
-# Let's create a proper /etc/samba/smbpasswd file
-[ -f /etc/%{name}/smbpasswd ] || {
- echo "Creating password file for samba..."
- touch /etc/%{name}/smbpasswd
-}
-
-# And this too, in case we don't have smbd to create it for us
-[ -f /var/cache/%{name}/unexpected.tdb ] || {
- touch /var/cache/%{name}/unexpected.tdb
-}
-
-# Let's define the proper paths for config files
-perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf
-
-# Fix the logrotate.d file from smb and nmb to smbd and nmbd
-if [ -f /etc/logrotate.d/samba ]; then
- perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba
- perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba
-fi
-
-# And not loose our machine account SID
-[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||:
-
-%if %build_winbind
-%post winbind
-if [ $1 = 1 ]; then
- /sbin/chkconfig winbind%{samba_major} on
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
- for i in passwd group;do
- grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
- if [ $? = 0 ];then
- echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf"
- awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf;
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
- else
- echo "$i entry found in /etc/nsswitch.conf"
- fi
- done
- if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi
-fi
-
-%preun winbind
-if [ $1 = 0 ]; then
- echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf"
- perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf
-
- /sbin/chkconfig winbind%{samba_major} reset
-fi
-%endif %build_winbind
-
-%if %build_wins
-%post -n nss_wins%{samba_major}
-if [ $1 = 1 ]; then
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
- grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
- if [ $? = 0 ];then
- echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf"
- awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf;
- else
- echo "wins entry found in /etc/nsswitch.conf"
- fi
-# else
-# echo "Upgrade, leaving nsswitch.conf intact"
-fi
-
-%preun -n nss_wins%{samba_major}
-if [ $1 = 0 ]; then
- echo "Removing wins entry from /etc/nsswitch.conf"
- perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf
-#else
-# echo "Leaving /etc/nsswitch.conf intact"
-fi
-%endif %build_wins
-
-%preun
-
-/sbin/chkconfig --level 35 smb%{samba_major} reset
-
-if [ $1 = 0 ] ; then
-%_preun_service smb%{samba_major}
-# /sbin/chkconfig --level 35 smb reset
-# Let's not loose /var/cache/samba
-
-# for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \
-#locking.tdb messages.tdb;do
-# if [ -e /var/cache/samba/$i ]; then
-# mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK
-# fi;
-# done
- if [ -d /var/log/%{name} ]; then
- rm -rf /var/log/%{name}/*
- fi
- if [ -d /var/cache/%{name} ]; then
- mv -f /var/cache/%{name} /var/cache/%{name}.BAK
- fi
-fi
-
-%post swat
-if [ -f /var/lock/subsys/xinetd ]; then
- service xinetd reload >/dev/null 2>&1 || :
-fi
-%update_menus
-
-%postun swat
-
-# Remove swat entry from xinetd
-if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then
-rm -f /etc/xinetd.d/swat%{samba_major}
- service xinetd reload &>/dev/null || :
-fi
-
-if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
-
-%clean_menus
-
-%triggerpostun -- samba < 1.9.18p7
-
-if [ $1 != 0 ]; then
- /sbin/chkconfig --level 35 smb on
-fi
-
-%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0
-
-if [ $1 != 0 ]; then
- [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||:
- [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||:
- [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||:
-fi
-
-%files server
-%defattr(-,root,root)
-#%attr(-,root,root) /sbin/*
-%{_sbindir}/%{name}
-%{_sbindir}/smbd%{samba_major}
-%{_sbindir}/nmbd%{samba_major}
-#%{_sbindir}/smbcontrol
-#%{_sbindir}/mkntpwd
-#%{prefix}/bin/addtosmbpass
-%{_bindir}/mksmbpasswd.sh
-%{_bindir}/smbstatus%{samba_major}
-%{_bindir}/convert_smbpasswd%{samba_major}
-%{_bindir}/pdbedit%{samba_major}
-%{_bindir}/smbgroupedit%{samba_major}
-#%attr(755,root,root) /lib/security/pam_smbpass*
-#/usr/share/swat
-%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers
-%attr(-,root,root) %config /etc/rc.d/init.d/smb%{samba_major}
-%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name}
-%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name}
-#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include
-%{_mandir}/man1/smbstatus*.1*
-%{_mandir}/man5/smbpasswd*.5*
-%{_mandir}/man7/samba*.7*
-%{_mandir}/man8/smbd*.8*
-%{_mandir}/man8/nmbd*.8*
-%{_mandir}/man1/smbcontrol*.1*
-%{_mandir}/man5/lmhosts*.5*
-%{_mandir}/man5/smb.conf*.5*
-%attr(775,root,root) %dir /var/lib/%{name}/netlogon
-%attr(775,root,root) %dir /var/lib/%{name}/profiles
-%attr(775,root,root) %dir /var/lib/%{name}/printers/*
-%dir /var/cache/%{name}
-%dir /var/log/%{name}
-%attr(1777,root,root) %dir /var/spool/%{name}
-%dir %{_datadir}/%{name}/scripts
-#%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
-#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl
-#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
-#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
-#%{perl_vendorlib}/*.pm
-%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
-
-
-%files doc
-%defattr(-,root,root)
-%doc README COPYING Manifest Read-Manifest-Now
-%doc WHATSNEW.txt Roadmap
-%doc README.%{name}-mandrake-rpm
-%doc docs
-%doc examples
-%doc swat/README
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/*
-
-%files swat
-%defattr(-,root,root)
-%config(noreplace) /etc/xinetd.d/swat%{samba_major}
-#%attr(-,root,root) /sbin/*
-%{_sbindir}/swat%{samba_major}
-%{_menudir}/%{name}
-%{_miconsdir}/*.xpm
-%{_liconsdir}/*.xpm
-%{_iconsdir}/*.xpm
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/*
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/*
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/*
-%{_mandir}/man8/swat*.8*
-
-%files client
-%defattr(-,root,root)
-%ifnarch alpha
-/sbin/mount.smb%{samba_major}
-/sbin/mount.smbfs%{samba_major}
-%attr(755,root,root) %{_bindir}/smbmount%{samba_major}
-%attr(4755,root,root) %{_bindir}/smbumount%{samba_major}
-#%attr(4755,root,root) %{_sbindir}/smbmnt
-%{_mandir}/man8/smbmnt*.8*
-%{_mandir}/man8/smbmount*.8*
-%{_mandir}/man8/smbumount*.8*
-%endif
-%{_bindir}/nmblookup%{samba_major}
-%{_bindir}/findsmb%{samba_major}
-%{_bindir}/smbclient%{samba_major}
-%{_bindir}/smbprint%{samba_major}
-%{_bindir}/smbtar%{samba_major}
-%{_bindir}/smbspool%{samba_major}
-# Link of smbspool to CUPS
-/%{_libdir}/cups/backend/smb%{samba_major}
-/%{_mandir}/man1/nmblookup*.1*
-/%{_mandir}/man1/findsmb*.1*
-/%{_mandir}/man1/smbclient*.1*
-/%{_mandir}/man1/smbtar*.1*
-
-%files common
-%defattr(-,root,root)
-%dir /var/cache/%{name}
-%dir /var/log/%{name}
-%dir /var/run/%{name}
-#%{_bindir}/make_smbcodepage
-#%{_bindir}/make_unicodemap
-%{_bindir}/testparm%{samba_major}
-%{_bindir}/testprns%{samba_major}
-#%{_bindir}/make_printerdef
-%{_bindir}/rpcclient%{samba_major}
-%{_bindir}/smbsh%{samba_major}
-%{_bindir}/smbpasswd%{samba_major}
-%{_bindir}/net%{samba_major}
-%{_bindir}/smbtree%{samba_major}
-%{_libdir}/smbwrapper%{samba_major}.so
-%attr(-,root,root) %config(noreplace) /etc/%{name}/smb.conf
-%attr(-,root,root) %config(noreplace) /etc/%{name}/smb-winbind.conf
-%attr(-,root,root) %config(noreplace) /etc/%{name}/lmhosts
-%attr(-,root,root) /var/lib/%{name}/codepages
-%{_mandir}/man1/make_smbcodepage*.1*
-%{_mandir}/man1/make_unicodemap*.1*
-%{_mandir}/man1/testparm*.1*
-%{_mandir}/man1/smbsh*.1*
-%{_mandir}/man1/testprns*.1*
-%{_mandir}/man5/smb.conf*.5*
-%{_mandir}/man5/lmhosts*.5*
-%{_mandir}/man8/smbpasswd*.8*
-/%{_mandir}/man1/smbcacls*.1*
-
-%if %build_winbind
-%files winbind
-%defattr(-,root,root)
-%{_sbindir}/winbindd%{samba_major}
-%{_bindir}/wbinfo%{samba_major}
-%attr(755,root,root) /lib/security/pam_winbind*
-%attr(755,root,root) /lib/libnss_winbind%{samba_major}*
-%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major}
-%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind*
-%{_mandir}/man8/winbindd*.8*
-%{_mandir}/man1/wbinfo*.1*
-%endif
-
-%if %build_wins
-%files -n nss_wins%{samba_major}
-%defattr(-,root,root)
-%attr(755,root,root) /lib/libnss_wins%{samba_major}.so*
-%endif
-
-#Files for antivirus support:
-%if %build_fprot
-%files vscan-fprot
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-fprotd.so
-%doc examples.bin/VFS/fprot/INSTALL
-%endif
-
-%if %build_kaspersky
-%files vscan-kaspersky
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-kavp.so
-%doc examples.bin/VFS/kaspersky/INSTALL
-%endif
-
-%if %build_mks
-%files vscan-mks
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-mksd.so
-%doc examples.bin/VFS/mks/INSTALL
-%endif
-
-%if %build_openantivirus
-%files vscan-openantivirus
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-oav.so
-%doc examples.bin/VFS/openantivirus/INSTALL
-%endif
-
-%if %build_sophos
-%files vscan-sophos
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-sophos.so
-%doc examples.bin/VFS/sophos/INSTALL
-%endif
-
-%if %build_symantec
-%files vscan-symantec
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-symantec.so
-%doc examples.bin/VFS/symantec/INSTALL
-%endif
-
-%if %build_trend
-%files vscan-trend
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-trend.so
-%doc examples.bin/VFS/trend/INSTALL
-%endif
-
-%changelog
-* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
-- Fix mount.smbfs3 pointing to smbmount not in package
-- Remove unnecessary lines from install (now done by make)
-- Build with ldap and ads on all releases by default
-- Put av-stuff back
-
-* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
-- When not building as system samba, avoid conflicting with system samba
-- Macro-ize as much as possible for above (aka finish cleanups)
-- Fix paths in init scripts and logrotate and xinetd
-- Fix provides and obsoletes so as to provide samba, but not obsolete
- current stable until we have a stable release (when it's the system samba).
-- Add warnings to descriptions when not system samba.
-- This is now parallel installable with the normal samba release, for easy
- testing. It shouldn't touch existing installations. Of course, only
- one samba at a time on the same interface!
-
-* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
-- Merge with 2.2.6pre2.2mdk
-- Detect alpha- and beta-, along with pre-releases
-
-* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
-- Sync with 2.2.3-2mdk (new --without options, detect when
- building for a different distribution.
-
-* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
-- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
- winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
- warning in description if built with these options.
-
-* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
-- Added %%if's for build_ads, which hopefully will add Active Directory
- Support (by request).
-
-* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
-- More syncing with 2.2 rpm (post and postun scripts)
-- Testing without ldap
-
-* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
-- 3.0-alpha13
-- Fixed installman.sh patch.
-
-* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
-- Fixed %post and %preun for nss_wins, added %post and %preun for
- samba-winbind (chkconfig and winbind entries in nsswitch.conf)
-
-* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
-- 3.0-alpha12
-- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
-- Added new subpackage for swat
-- More %if's for ldap.
-
-* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
-- 3.0-alpha11
-
-* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
-- 3.0-alpha10
-
-* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
-- 3.0-alpha9
-
-* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
-- Added net command to %files common, pdbedit and smbgroupedit to
- %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
- Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
-
-* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
-- Patch for installman.sh to handle lang=en correctly (p24)
-- added --with-manpages-langs=en,ja,pl (translated manpages), but there
- aren't any manpages for these languages yet ... so we still
- need %dir and %doc entries for them ...
-- patch (p25) to configure.in to support more than 2 languages.
-- addtosmbpass seems to have returned for now, but make_* have disappeared!
-
-* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
-- DESTDIR patch for Makefile.in (p23), remove a lot of %install scripts
- this forces move of smbcontrol and smbmnt to %{prefix}/bin
- removed --with-pam_smbpass as it doesn't compile.
-
-* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
-- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
-- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch
- (applied upstream), removed ook-patch (codepage directory totally different).
-- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23
- should be applied upstream before 3.0 ships ...
-
-* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
-- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
-- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
-
-* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
-- Had to remove the network recycle bin patch: it seems to mess up
- file deletion from windows (files appear to be "already in use")
-
-* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
-- added network recycle bin patch:
- <http://www.amherst.edu/~bbstone/howto/samba.html>
-- added "recycle bin = .recycled" parameter in smb.conf [homes].
-- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
-
-* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
-- added %build 8.0 and 7.2, for tweakers to play around.
-- changed configure options:
- . removed --with-mmap, --with-netatalk (obsolete).
- . added --with-msdfs, --with-vfs (seems stable, but still need testing).
-
-* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
-- rebuilt with winbind and nss_wins enabled.
-
-* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
-- Rebuilt on cooker.
-
-* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
-- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
- and add sample linpopup command. Added print driver directories.
-- New XFS quota patch (untested!, samba runs, but do quotas work? We
- can't check yet since the kernel doesn't seem to support XFS quotas!)
-
-* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
-- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
- Who did a tremendous integration work on 2.2.2.
- Rebuild on cooker, please test XFS (ACLs and quotas) again...
-
-* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
-- Samba-2.2.2. released! Use %defines to determine which subpackages
- are built and which Mandrake release we are buiding on/for (hint: define
- build_mdk81 1 for Mandrake 8.1 updates)
-
-* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
-- %post and %postun for nss_wins
-
-* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
-- New CVS snapshot, /etc/pam.d/system-auth-winbind added
- with configuration to allow easy winbind setup.
-
-* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
-- Added new package nss_wins and moved smbpasswd to common (required by
- winbind).
-
-* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
-- Added new package winbind.
-
-* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
-- Removed patch to smb init.d file (applied in cvs)
-
-* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
-- Added winbind init script, which still needs to check for running nmbd.
-
-* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
-- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and
- pam_winbind, moved pam_smbpass from samba-common to samba. We still
- need a start-up script for winbind, or need to modify existing one.
-
-* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
-- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
- Added smbd patch to support XFS quota (Nathan Scott)
-
-* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
-- Oops! smbpasswd created in wrong directory...
-
-* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
-- Removed a wrong comment in smb.conf.
- Added creation of smbpasswd during install.
-
-* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
-- really less verbose %%post
-
-* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
-- Fix shared libs in /usr/bin silliness.
-
-* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
-- less verbose %%post
-
-* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
-- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
- is still needed, even with point-and-print!, user add script should
- use name and not gid, since we may not get the gid . New script for
- putting manpages in place (still need to be added in %files!). Moved
- smbcontrol to sbin and added it and its man page to %files.
-
-* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
-- cleanup /var/lib/samba/codepage/src
-
-* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
-- moved codepage generation to %install and codepage dir to /var/lib/samba
-
-* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
-- /lib/* was in both samba and samba-common
- Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
- when Samba was under the Megabyte..."
-
-* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
-- Added "the gc touch" to smbinit through the use of killall -0 instead of
- grep cupsd | grep -v grep (too many greps :o)
-
-* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
-- BuildRequires: libcups-devel
-- Removed BuildRequires: openssl-devel
-
-* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
-- replace chkconfig --add/del with --level 35 on/reset.
-
-* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
-- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
-
-* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
-- Bugfix release. Fixed add user script, added print$ share and printer admin
- We need to test interaction of new print support with CUPS, but printer
- driver uploads should work.
-
-* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
-- fixed smb.conf a bit, rebuilt on cooker.
-
-* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
-- Finally, samba 2.2.1 has actually been release. At least we were ready!
- Cleaned up smb.conf, and added some useful entries for domain controlling.
- Migrated changes made in samba's samba2.spec for 2.2.1 to this file.
- Added groupadd command in post to create a group for samba machine accounts.
- (We should still check the postun, samba removes pam, logs and cache)
-
-* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
-- fixed smbwrapper compile options.
-
-* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
-- added LFS support.
- added smbwrapper support (smbsh)
-
-* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
-- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
- of smbmount (/usr/bin/smbmount)
-
-* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
-- smbmount and smbumount are now in /usr/bin and SUID.
- added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
- Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
-
-* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
-- s/Copyright/License/;
-- Stop Sylvester from pretending .gz source to be .bz2 source via filename
- aka really bzip2 the source.
-
-* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
-- changed Till's startup script modifications: now samba is being reloaded
- automatically 1 minute after it has started (same reasons as below in 9mdk)
- added _post_ and _preun_ for service smb
- fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
-
-* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
-- Modified the Samba startup script so that in case of CUPS being used as
- printing system Samba only starts when the CUPS daemon is ready to accept
- requests. Otherwise the CUPS queues would not appear as Samba shares.
-
-* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
-- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
-
-* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
-- put SWAT menu icons back in place.
-
-* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
-- OOPS! fixed smbmount symlinks
-
-* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
-- removed inetd postun script, replaced with xinetd.
- updated binary list (smbcacls...)
- cleaned samba.spec
-
-* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
-- Changed configure options to point to correct log and codepage directories,
- added crude script to fix logrotate file for new log file names, updated
- patches to work with current CVS.
-
-* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
-- Cleaned and updated the %files section.
-
-* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
-- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
- Fixed fixinit patch (/etc/samba/smb.conf)
-
-* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
-- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
- patches, moved netlogon and profile shares to /var/lib/samba in the
- smb.conf to match the spec file. Added configuration for ntlogon to
- smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
- symlink I introduced in 2.2.0-1mdk
-
-* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
-- Added more configure options. Changed Description field (thx John T).
-
-* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
-- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
-
-* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
-- moved netlogon and profiles back to /home.
-
-* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
-- fixed post inetd/xinetd script&
-
-* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
-- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
- nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
- to take. smbadduser and addtosmbpass seem to have disappeared. Moved
- all Mandrake-specific files to packaging/Mandrake and made patches
- from those shipped with samba. Moved netlogon to /home/samba and added
- /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
-
-* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
-- Fix menu entry and provide separate menu entry for GNOME
- (nautilus doesn't support HTTP authentication yet)
-- Add icons in package
-
-* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
-- use new server macros
-
-* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
-- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
-
-* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
-- spec cosmetics, added '-r' option to lpr-cups command line so files are
- removed from /var/spool/samba after printing.
-
-* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
-- merged last rh patches.
-
-* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
-- removed dependencies on cups and cups-devel so one can install samba without using cups
-- added /home/netlogon
-
-* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
-- Changed default print command in /etc/smb.conf, so that the Windows
- driver of the printer has to be used on the client.
-- Fixed bug in smbspool which prevented from printing from a
- Linux-Samba-CUPS client to a Windows server through the guest account.
-
-* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
-- Moved "smbspool" (Samba client of CUPS) to the samba-client package
-
-* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
-- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
- quota related compile problems on the alpha.
-
-* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
-- Fixed 'guest ok = ok' flag in smb.conf
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
-- Allowed guest account to print in smb.conf
-- added swat icon in menu
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
-- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
-- Changed fixinit patch.
-- Changed smb.conf for better CUPS configuration.
-- Thanks Fred for doing this ---vvv.
-
-* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
-- menu entry for web configuration tool.
-- merge with rh: xinetd + ssl + pam_stack.
-- Added smbadduser rh-bugfix w/o relocation of config-files.
-
-* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
-- added build requires on cups-devel and pam-devel.
-
-* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
-- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
- wrong.
-
-* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
-- Cosmetic changes to make rpmlint more happy
-
-* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
-- added linkage to the using_samba book in swat
-
-* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
-- Added CUPS support to smb.conf
-- Added internationalization options to smb.conf [Global]
-
-* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
-- Put "smbspool" to the files to install
-
-* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
-- Did some cleaning in the patches
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
-- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
-- added make_unicodemap and build of unicode_map.$i in the spec file
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
-- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
-
-* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
-- 2.0.7
-
-* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
-
-- Titi sucks, does not put versions in changelog
-- Fixed groups for -common and -client
-- /usr/sbin/samba is no config file
-
-* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
-- fix buggy post install script (pixel)
-
-* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
-
-- Changed group according to 7.1 specs
-- Some spec file changes
-- Let spec-helper do its job
-
-* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- 2.0.6.
-
-* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Merge with rh changes.
-- Split in 3 packages.
-
-* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
-- corrected a bug with %post (the $1 parameter is "1" in case of
- a first install, not "0". That parameter is the number of packages
- of the same name that will exist after running all the steps if nothing
- is removed; so it is "1" after first isntall, "2" for a second install
- or an upgrade, and "0" for a removal)
-
-* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
-- made smbmnt and smbumount suid root, and only executable by group 'smb'
- add to 'smb' group any user that should be allowed to mount/unmount
- SMB shared directories
-
-* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- 2.0.5a (bug security fix).
-
-* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
-- 2.0.5
-- cs/da/de/fi/fr/it/tr descriptions/summaries
-
-* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
-- 2.0.4b
-- recompile on a system that works ;)
-
-* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Mandrake adaptations.
-- Bzip2 man-pages.
-
-* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
-- add a mount.smb to make smb mounting a little easier.
-- smb filesystems apparently do not work on alpha. Oops.
-
-* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
-- always create codepages
-
-* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
-- logrotate changes
-
-* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
-- auto rebuild in the new build environment (release 3)
-
-* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
-- updated init script to use graceful restart (not stop/start)
-
-* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.3
-
-* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.2
-
-* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
-- swat swat
-
-* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com>
-- fix bash2 breakage in post script
-
-* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.0
-
-* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
-- make sure all binaries are stripped
-
-* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
-- update to 1.9.18p10.
-- fix %triggerpostun.
-
-* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
-- updated postun triggerscript to check $0
-- clear /etc/codepages from %preun instead of %postun
-
-* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
-- made the %postun script a tad less agressive; no reason to remove
- the logs or lock file (after all, if the lock file is still there,
- samba is still running)
-- the %postun and %preun should only exectute if this is the final
- removal
-- migrated %triggerpostun from Red Hat's samba package to work around
- packaging problems in some Red Hat samba releases
-
-* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
-- minor tidy up in preparation for release of 1.9.18p5
-- added findsmb utility from SGI package
-
-* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
-- Updated version and codepage info.
-- Release to test name resolve order
-
-* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
-- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
-- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
-- Compounded make line
-- Updated smb.init restart mechanism
-- Use compound mkdir -p line instead of individual calls to mkdir
-- Fixed smb.conf file path for log files
-- Fixed smb.conf file path for incoming smb print spool directory
-- Added a number of options to smb.conf file
-- Added smbadduser command (missed from all previous RPMs) - Doooh!
-- Added smbuser file and smb.conf file updates for username map