summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--howto4.txt218
1 files changed, 4 insertions, 214 deletions
diff --git a/howto4.txt b/howto4.txt
index 71b712e598..6a40d612e1 100644
--- a/howto4.txt
+++ b/howto4.txt
@@ -1,217 +1,7 @@
-Samba4 developer howto
-======================
+Samba4 howto
+============
-tridge@samba.org, December 2004
+For current versions of the Samba4 HOWTO, please see our wiki:
-A more up to date version of this howto can be found in the wiki
-at http://wiki.samba.org/index.php/Samba4/HOWTO.
+ http://wiki.samba.org/index.php/Samba4/HOWTO
-This is a very basic document on how to setup a simple Samba4
-server. This is aimed at developers who are already familiar with
-Samba3 and wish to participate in Samba4 development. This is not
-aimed at production use of Samba4.
-
-.. contents::
-
-Step 1: download Samba4
------------------------
-
-If you have downloaded the Samba4 code via a tarball released from the
-samba.org website, Step 1 has already been completed for you. For testing
-with the version released in the tarball, you may continue on to Step 2. Note
-that the references below to the top-level directory named "samba4" will
-instead be based on the name of the tarball downloaded (e.g.
-"samba-4.0.0alpha3" for the tarball samba-4.0.0alpha3.tar.gz).
-
-There are 2 methods of doing this:
-
- method 1: "rsync -avz samba.org::ftp/unpacked/samba_4_0_test/ samba4"
-
- method 2: "git clone git://git.samba.org/samba.git samba4; cd samba4 && git checkout -b v4-0-test origin/v4-0-test; cd .."
-
-both methods will create a directory called "samba4" in the current
-directory. If you don't have rsync or git then install one of them.
-
-Since only released versions of Samba contain a pregenerated configure script,
-you will have to generate it by hand::
-
- $ cd samba4/source
- $ ./autogen.sh
-
-Note that the above rsync command will give you a checked out git
-repository. So if you also have git you can update it to the latest
-version at some future date using::
-
- $ cd samba4
- $ git pull origin v4-0-test
-
-Step 2: compile Samba4
-----------------------
-
-Recommended optional development libraries:
-- acl and xattr development libraries
-- gnutls
-- readline
-
-Run this::
-
- $ cd samba4/source
- $ ./configure
- $ make
-
-
-Step 2bis: recompile Samba4
----------------------------
-
-This only applies for those who are recompiling Samba4 after updating the code
-(using "rsync" or "git").
-
-Due to some imperfections in our actual build system (hope that this changes
-soon) it is recommended to perform this after the source upgrade:
-
- $ cd samba4/source
- $ make clean
- $ ./autogen.sh
- $ ./configure
- $ make idl_full
- $ make
-
-Not all the steps are needed every time but doing so makes sure that you won't
-have old compiled objects standing in the way and cause malfunctions.
-It also makes sure that changes in the IDL files are correctly catched up.
-
-Step 3: install Samba4
-----------------------
-
-Run this as a user who have permission to write to the install
-directory (defaults to /usr/local/samba). Use --prefix option to
-configure above to change this.
-
-::
-
- # make install
-
-Step 4: provision Samba4
-------------------------
-
-The "provision" step sets up a basic user database. Be warned that this
-removes all preexisting database data (if any)!
-
-It must be run as a user with permission to write to the install directory
-(typically "root").
-
-::
-
- # cd source
- # ./setup/provision --realm=YOUR.REALM --domain=YOURDOM \
- # --adminpass=SOMEPASSWORD --server-role='domain controller'
-
-'YOURDOM' is the NT4 style domain name. 'YOUR.REALM' is your kerberos
-realm, which is typically your DNS domain name.
-
-If you provisioned a more recent Samba4 system already you should be able to
-use the procedures shown in "upgrading-samba4.txt" to upgrade it and keep all
-data.
-
-When you are using Samba3 at the moment you could try the experimental script
-"upgrade_from_s3" under the "setup" directory of the source
-distribution (it isn't included in binary distributions yet).
-
-Step 5: Create a simple smb.conf
---------------------------------
-
-The provisioning will create a very simple smb.conf with no shares by
-default. You will need to update it to add at least one share. For
-example::
-
- [test]
- path = /data/test
- read only = no
-
-Step 6: starting Samba4
------------------------
-
-The simplest is to just run "samba", but as a developer you may find
-the following more useful::
-
- # samba -i -M single
-
-that means "start samba without messages in stdout, and running a
-single process. That mode of operation makes debugging samba with gdb
-particularly easy.
-
-Note that now it is no longer necessary to have an instance of nmbd
-from Samba 3 running. If you are running any smbd or nmbd processes
-they need to be stopped before starting samba from Samba 4.
-
-Make sure you put the bin and sbin directories from your new install
-in your $PATH. Make sure you run the right version!
-
-Step 7: testing Samba4
-----------------------
-
-try this command::
-
- $ smbclient //localhost/test -Uadministrator%SOMEPASSWORD
-
-
-NOTE about filesystem support
------------------------------
-
-To use the advanced features of Samba4 you need a filesystem that
-supports both the "user" and "system" xattr namespaces.
-
-If you run Linux with a 2.6 kernel and ext3 this means you need to
-include the option "user_xattr" in your /etc/fstab. For example::
-
- /dev/hda3 /home ext3 user_xattr 1 1
-
-You also need to compile your kernel with the XATTR and SECURITY
-options for your filesystem. For ext3 that means you need::
-
- CONFIG_EXT3_FS_XATTR=y
- CONFIG_EXT3_FS_SECURITY=y
-
-If you are running a Linux 2.6 kernel with CONFIG_IKCONFIG_PROC
-defined you can check this with the following command::
-
- $ zgrep CONFIG_EXT3_FS /proc/config.gz
-
-If you don't have a filesystem with xattr support, then you can
-simulate it by using the option::
-
- posix:eadb = /usr/local/samba/eadb.tdb
-
-that will place all extra file attributes (NT ACLs, DOS EAs, streams
-etc), in that tdb. It is not efficient, and doesn't scale well, but at
-least it gives you a choice when you don't have a modern filesystem.
-
-Testing your filesystem
------------------------
-
-To test your filesystem support, install the 'attr' package and run
-the following 4 commands as root::
-
- # touch test.txt
- # setfattr -n user.test -v test test.txt
- # setfattr -n security.test -v test2 test.txt
- # getfattr -d test.txt
- # getfattr -n security.test -d test.txt
-
-You should see output like this::
-
- # file: test.txt
- user.test="test"
-
- # file: test.txt
- security.test="test2"
-
-If you get any "Operation not supported" errors then it means your
-kernel is not configured correctly, or your filesystem is not mounted
-with the right options.
-
-If you get any "Operation not permitted" errors then it probably means
-you didn't try the test as root.
-
-..
- vim: ft=rest