diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/docbook/manpages/swat.8.sgml | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/docs/docbook/manpages/swat.8.sgml b/docs/docbook/manpages/swat.8.sgml new file mode 100644 index 0000000000..7d9540418e --- /dev/null +++ b/docs/docbook/manpages/swat.8.sgml @@ -0,0 +1,202 @@ +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN"> +<refentry id="swat"> + +<refmeta> + <refentrytitle>swat</refentrytitle> + <manvolnum>8</manvolnum> +</refmeta> + + +<refnamediv> + <refname>swat</refname> + <refpurpose>Samba Web Administration Tool</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nmblookup</command> + <arg choice="opt">-s <smb config file></arg> + <arg choice="opt">-a</arg> + </cmdsynopsis> +</refsynopsisdiv> + +<refsect1> + <title>DESCRIPTION</title> + + <para>This tool is part of the <ulink url="samba.7.html"> + Samba</ulink> suite.</para> + + + <para><command>swat</command> allows a Samba administrator to + configure the complex <ulink url="smb.conf.5.html"><filename> + smb.conf(5)</filename></ulink> file via a Web browser. In addition, + a <command>swat</command> configuration page has help links + to all the configurable options in the smb.conf file allowing an + administrator to easily look up the effects of any change. </para> + + <para>swat is run from inetd </para> +</refsect1> + + +<refsect1> + <title>OPTIONS</title> + + <variablelist> + <varlistentry> + <term>-s smb configuration file</term> + <listitem><para>The default configuration file path is + determined at compile time. The file specified contains + the configuration details required by the <command>smbd + </command> server. This is the file that swat will modify. + The information in this file includes server-specific + information such as what printcap file to use, as well as + descriptions of all the services that the server is to provide. + See <filename>smb.conf</filename> for more information. + </para></listitem> + </varlistentry> + + + <varlistentry> + <term>-a</term> + <listitem><para>This option disables authentication and puts + swat in demo mode. In that mode anyone will be able to modify + the smb.conf file. </para> + + <para><emphasis>Do NOT enable this option on a production + server. </emphasis></para></listitem> + </varlistentry> + </variablelist> + + +<RefSect1><title>Installation</title> + +<para>After +you compile SWAT you need to run "make install" <ItemizedList MARK=Bullet> +<term>to install the </term><listitem><para>swat binary +and the various help files and images. A default install would put these +in: </para></listitem> +</ItemizedList> + + +<para> <BR> + <BR> +/usr/local/samba/bin/swat<BR> +/usr/local/samba/swat/images/*<BR> +/usr/local/samba/swat/help/*<BR> + <BR> + + +<para></RefSect1> + +<RefSect1><title>Inetd Installation</title> + +<para>You need to edit your CW/etc/inetd.conf and CW/etc/services +to enable SWAT to be launched via inetd. + +<para>In CW/etc/services you need to +add a line like this: + +<para>CWswat 901/tcp + +<para>Note for NIS/YP users - +you may need to rebuild the NIS service maps rather than alter your local +CW/etc/services file. + +<para>the choice of port number isn't really important except +that it should be less than 1024 and not currently used (using a number +above 1024 presents an obscure security hole depending on the implementation +details of your inetd daemon). + +<para>In CW/etc/inetd.conf you should add a line +like this: + +<para>CWswat stream tcp nowait.400 root /usr/local/samba/bin/swat +swat + +<para>One you have edited CW/etc/services and CW/etc/inetd.conf you need +to send a HUP signal to inetd. To do this use CW"kill -1 PID" where PID is +the process ID of the inetd daemon. + +<para></RefSect1> + +<RefSect1><title>Launching</title> + +<para>To launch swat just run your +favorite web browser and point it at CW<Command>http://localhost:901/.</Command> + +<para>Note that +you can attach to swat from any IP connected machine but connecting from +a remote machine leaves your connection open to password sniffing as passwords +will be sent in the clear over the wire. + +<para></RefSect1> + +<RefSect1><title>Files</title> + +<para>/etc/inetd.conf + +<para>This file must +contain suitable startup information for the meta-daemon. + +<para>/etc/services + + +<para>This file must contain a mapping of service name (e.g., swat) to service +port (e.g., 901) and protocol type (e.g., tcp). + +<para>/usr/local/samba/lib/smb.conf + + +<para>This is the default location of the <I>smb.conf</I> server configuration file that +swat edits. Other common places that systems install this file are <I>/usr/samba/lib/smb.conf</I> +and <I>/etc/smb.conf</I>. + +<para>This file describes all the services the server is to +make available to clients. See <Command>smb.conf (5)</Command> for more information. + +<para></RefSect1> + +<refsect1> + <title>WANRNIGS</title> + + <para><command>swat</command> will rewrite your <filename>smb.conf + </filename> file. It will rearrange the entries and delete all + comments, <parameter>include=</parameter> and <parameter>copy=" + </parameter> options. If you have a carefully crafted <filename> + smb.conf</filanem> then back it up or don't use swat! </para> +</refsect1> + + +<refsect1> + <title>VERSION</title> + + <para>This man page is correct for version 2.2 of + the Samba suite.</para> +</refsect1> + +<refsect1> + <title>SEE ALSO</title> + <para><command>inetd(5)</command>, + <ulink url="smbd.8.html"><command>smbd(8)</command></ulink>, + <ulink url="smb.conf.5.html">smb.conf(5)</ulink> + </para> +</refsect1> + +<refsect1> + <title>AUTHOR</title> + + <para>The original Samba software and related utilities + were created by Andrew Tridgell. Samba is now developed + by the Samba Team as an Open Source project similar + to the way the Linux kernel is developed.</para> + + <para>The original Samba man pages were written by Karl Auer. + The man page sources were converted to YODL format (another + excellent piece of Open Source software, available at + <ulink url="ftp://ftp.icce.rug.nl/pub/unix/"> + ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0 + release by Jeremy Allison. The conversion to DocBook for + Samba 2.2 was done by Gerald Carter</para> +</refsect1> + +</refentry> |