diff options
Diffstat (limited to 'source3/rpc_server')
| -rw-r--r-- | source3/rpc_server/srv_spoolss_nt.c | 205 |
1 files changed, 94 insertions, 111 deletions
diff --git a/source3/rpc_server/srv_spoolss_nt.c b/source3/rpc_server/srv_spoolss_nt.c index 296d9a8ca2..a9c09b9107 100644 --- a/source3/rpc_server/srv_spoolss_nt.c +++ b/source3/rpc_server/srv_spoolss_nt.c @@ -1143,7 +1143,58 @@ WERROR _spoolss_open_printer(pipes_struct *p, SPOOL_Q_OPEN_PRINTER *q_u, SPOOL_R /******************************************************************** * spoolss_open_printer * - * called from the spoolss dispatcher + * If the openprinterex rpc call contains a devmode, + * it's a per-user one. This per-user devmode is derivated + * from the global devmode. Openprinterex() contains a per-user + * devmode for when you do EMF printing and spooling. + * In the EMF case, the NT workstation is only doing half the job + * of rendering the page. The other half is done by running the printer + * driver on the server. + * The EMF file doesn't contain the page description (paper size, orientation, ...). + * The EMF file only contains what is to be printed on the page. + * So in order for the server to know how to print, the NT client sends + * a devicemode attached to the openprinterex call. + * But this devicemode is short lived, it's only valid for the current print job. + * + * If Samba would have supported EMF spooling, this devicemode would + * have been attached to the handle, to sent it to the driver to correctly + * rasterize the EMF file. + * + * As Samba only supports RAW spooling, we only receive a ready-to-print file, + * we just act as a pass-thru between windows and the printer. + * + * In order to know that Samba supports only RAW spooling, NT has to call + * getprinter() at level 2 (attribute field) or NT has to call startdoc() + * and until NT sends a RAW job, we refuse it. + * + * But to call getprinter() or startdoc(), you first need a valid handle, + * and to get an handle you have to call openprintex(). Hence why you have + * a devicemode in the openprinterex() call. + * + * + * Differences between NT4 and NT 2000. + * NT4: + * --- + * On NT4, you only have a global devicemode. This global devicemode can be changed + * by the administrator (or by a user with enough privs). Everytime a user + * wants to print, the devicemode is resetted to the default. In Word, everytime + * you print, the printer's characteristics are always reset to the global devicemode. + * + * NT 2000: + * ------- + * In W2K, there is the notion of per-user devicemode. The first time you use + * a printer, a per-user devicemode is build from the global devicemode. + * If you change your per-user devicemode, it is saved in the registry, under the + * H_KEY_CURRENT_KEY sub_tree. So that everytime you print, you have your default + * printer preferences available. + * + * To change the per-user devicemode: it's the "Printing Preferences ..." button + * on the General Tab of the printer properties windows. + * + * To change the global devicemode: it's the "Printing Defaults..." button + * on the Advanced Tab of the printer properties window. + * + * JFM. ********************************************************************/ WERROR _spoolss_open_printer_ex( pipes_struct *p, SPOOL_Q_OPEN_PRINTER_EX *q_u, SPOOL_R_OPEN_PRINTER_EX *r_u) @@ -1180,39 +1231,36 @@ Can't find printer handle we created for printer %s\n", name )); return WERR_INVALID_PRINTER_NAME; } - /* - First case: the user is opening the print server: - - Disallow MS AddPrinterWizard if parameter disables it. A Win2k - client 1st tries an OpenPrinterEx with access==0, MUST be allowed. - - Then both Win2k and WinNT clients try an OpenPrinterEx with - SERVER_ALL_ACCESS, which we allow only if the user is root (uid=0) - or if the user is listed in the smb.conf printer admin parameter. - - Then they try OpenPrinterEx with SERVER_READ which we allow. This lets the - client view printer folder, but does not show the MSAPW. - - Note: this test needs code to check access rights here too. Jeremy - could you look at this? - - - Second case: the user is opening a printer: - NT doesn't let us connect to a printer if the connecting user - doesn't have print permission. - - */ - get_current_user(&user, p); - if (Printer->printer_type == PRINTER_HANDLE_IS_PRINTSERVER) { + /* + * First case: the user is opening the print server: + * + * Disallow MS AddPrinterWizard if parameter disables it. A Win2k + * client 1st tries an OpenPrinterEx with access==0, MUST be allowed. + * + * Then both Win2k and WinNT clients try an OpenPrinterEx with + * SERVER_ALL_ACCESS, which we allow only if the user is root (uid=0) + * or if the user is listed in the smb.conf printer admin parameter. + * + * Then they try OpenPrinterEx with SERVER_READ which we allow. This lets the + * client view printer folder, but does not show the MSAPW. + * + * Note: this test needs code to check access rights here too. Jeremy + * could you look at this? + * + * Second case: the user is opening a printer: + * NT doesn't let us connect to a printer if the connecting user + * doesn't have print permission. + */ + if (Printer->printer_type == PRINTER_HANDLE_IS_PRINTSERVER) + { /* Printserver handles use global struct... */ snum = -1; - /* Map standard access rights to object specific access - rights */ + /* Map standard access rights to object specific access rights */ se_map_standard(&printer_default->access_required, &printserver_std_mapping); @@ -1233,21 +1281,30 @@ Can't find printer handle we created for printer %s\n", name )); if ( printer_default->access_required & SERVER_ACCESS_ADMINISTER ) { - if (!lp_ms_add_printer_wizard()) { close_printer_handle(p, handle); return WERR_ACCESS_DENIED; } - if (user.uid == 0 || - user_in_list(uidtoname(user.uid), - lp_printer_admin(snum))) - return WERR_OK; + /* if the user is not root and not a printer admin, then fail */ - close_printer_handle(p, handle); - return WERR_ACCESS_DENIED; + if ( user.uid != 0 + && !user_in_list(uidtoname(user.uid), lp_printer_admin(snum)) ) + { + close_printer_handle(p, handle); + return WERR_ACCESS_DENIED; + } + + printer_default->access_required = SERVER_ACCESS_ADMINISTER; + } + else + { + printer_default->access_required = SERVER_ACCESS_ENUMERATE; } + DEBUG(4,("Setting print server access = %s\n", (printer_default->access_required == SERVER_ACCESS_ADMINISTER) + ? "SERVER_ACCESS_ADMINISTER" : "SERVER_ACCESS_ENUMERATE" )); + /* We fall through to return WERR_OK */ } @@ -1299,83 +1356,9 @@ Can't find printer handle we created for printer %s\n", name )); DEBUG(4,("Setting printer access = %s\n", (printer_default->access_required == PRINTER_ACCESS_ADMINISTER) ? "PRINTER_ACCESS_ADMINISTER" : "PRINTER_ACCESS_USE" )); - Printer->access_granted = printer_default->access_required; - - /* - * If we have a default device pointer in the - * printer_default struct, then we need to get - * the printer info from the tdb and if there is - * no default devicemode there then we do a *SET* - * here ! This is insanity.... JRA. - */ - - /* - * If the openprinterex rpc call contains a devmode, - * it's a per-user one. This per-user devmode is derivated - * from the global devmode. Openprinterex() contains a per-user - * devmode for when you do EMF printing and spooling. - * In the EMF case, the NT workstation is only doing half the job - * of rendering the page. The other half is done by running the printer - * driver on the server. - * The EMF file doesn't contain the page description (paper size, orientation, ...). - * The EMF file only contains what is to be printed on the page. - * So in order for the server to know how to print, the NT client sends - * a devicemode attached to the openprinterex call. - * But this devicemode is short lived, it's only valid for the current print job. - * - * If Samba would have supported EMF spooling, this devicemode would - * have been attached to the handle, to sent it to the driver to correctly - * rasterize the EMF file. - * - * As Samba only supports RAW spooling, we only receive a ready-to-print file, - * we just act as a pass-thru between windows and the printer. - * - * In order to know that Samba supports only RAW spooling, NT has to call - * getprinter() at level 2 (attribute field) or NT has to call startdoc() - * and until NT sends a RAW job, we refuse it. - * - * But to call getprinter() or startdoc(), you first need a valid handle, - * and to get an handle you have to call openprintex(). Hence why you have - * a devicemode in the openprinterex() call. - * - * - * Differences between NT4 and NT 2000. - * NT4: - * --- - * On NT4, you only have a global devicemode. This global devicemode can be changed - * by the administrator (or by a user with enough privs). Everytime a user - * wants to print, the devicemode is resetted to the default. In Word, everytime - * you print, the printer's characteristics are always reset to the global devicemode. - * - * NT 2000: - * ------- - * In W2K, there is the notion of per-user devicemode. The first time you use - * a printer, a per-user devicemode is build from the global devicemode. - * If you change your per-user devicemode, it is saved in the registry, under the - * H_KEY_CURRENT_KEY sub_tree. So that everytime you print, you have your default - * printer preferences available. - * - * To change the per-user devicemode: it's the "Printing Preferences ..." button - * on the General Tab of the printer properties windows. - * - * To change the global devicemode: it's the "Printing Defaults..." button - * on the Advanced Tab of the printer properties window. - * - * JFM. - */ - - - -#if 0 - if (printer_default->devmode_cont.devmode != NULL) { - result = printer_write_default_dev( snum, printer_default); - if (result != 0) { - close_printer_handle(p, handle); - return result; - } - } -#endif } + + Printer->access_granted = printer_default->access_required; return WERR_OK; } @@ -7273,7 +7256,7 @@ WERROR _spoolss_addform( pipes_struct *p, SPOOL_Q_ADDFORM *q_u, SPOOL_R_ADDFORM goto done; } - if (Printer->access_granted != PRINTER_ACCESS_ADMINISTER) { + if ( !(Printer->access_granted & (PRINTER_ACCESS_ADMINISTER|SERVER_ACCESS_ADMINISTER)) ) { DEBUG(2,("_spoolss_addform: denied by handle permissions.\n")); status = WERR_ACCESS_DENIED; goto done; |