Age | Commit message (Collapse) | Author | Files | Lines |
|
(This used to be commit 35dd48740d8f733e7725813322b094b4679b31c5)
|
|
added lp_domainsid()
lsaparse.c smb.h:
debugging structures and parsing functions
pipes.c:
finally got to the functions that will go into the RPC switch statement.
(This used to be commit d15aed8a9c58a7cc90befaee2d5a2752708f9327)
|
|
from yesterday.
(This used to be commit 0b7049fae25957851a7f33d2bd500d8ecefc1ad5)
|
|
server.c: Allow admin_user on read only shares. I think this is
safe but it needs looking at.
Jeremy (jallison@whistle.com)
(This used to be commit cc50955a2760f1de7e80b91408a7c0806f6eb44c)
|
|
The interface is the same, but I've simplified the code a bit and added
a few comments. I tested the changes and the output is the same as that
produced by the original (at least, it was in all of my tests). CRH
(This used to be commit 707d0ec388c0045938f367e1d17919bfc8637fea)
|
|
lsaparse.c: #ifdef'ed out code so this will compile - LUKE PLEASE CHECK THIS.
pipes.c: #ifdef'ed out code so this will compile - LUKE PLEASE CHECK THIS.
server.c: Fixed last known oplock race condition.
smb.h: Re-removed USE_OPLOCK defines - someone checked in an old version.
smbparse.c: #ifdef'ed out code so this will compile - LUKE PLEASE CHECK THIS.
Jeremy (jallison@whistle.com)
(This used to be commit 1e1366ddc5542283a37debdf830ca139bbade1b0)
|
|
more static unused functions in pipes.c for the LSA RPC stream.
smb.h:
corrections and altercations over the documentation
lsaparse.c:
reflecting alterations in LSA structures...
(This used to be commit bef12478d212a950578843d6d4dece1f153bfd25)
|
|
<lwhitman@stm2.nrl.navy.mil>
(This used to be commit 67c1e87e8fda724da6dd3663641639167dd33a16)
|
|
some routines to create LSA RPC packets. none of them are used.
lsaparse.c:
smbparse.c:
smb.h:
more tidy-up.
(This used to be commit b37e21273e81b875876e8e8ddf6804714044ffd8)
|
|
(This used to be commit b12b3626fd9ccc9cdf2111937b3ee344da361b1f)
|
|
of defunct smbd processes.
Andrew
(This used to be commit bf1f8b1567cb46e3e73ae8dbb26f6228cf519c1f)
|
|
Mental note: always commit from root directory. :^o
Paul.
(This used to be commit 5a38eaac75a6bede2d946f69cf664d7ca3989b55)
|
|
All done.
Paul.
(This used to be commit 9a81cb171c178a85ecd045afafbce7d4b481344e)
|
|
docs/faq.
Replaced all reference to samba.canberra.edu.au/pub/samba/samba.html
with samba.anu.edu.au/samba/
Replaced references to ictinus@lake.canberra.edu.au
with ictinus@samba.anu.edu.au
Added 3 new mirrors, Greece, Poland, Romania
Paul.
(This used to be commit d808df8191cdf21b011e773e6e99b0c65524253c)
|
|
invalid share mode entries. Thanks to berg@wienrg.aut.alcatel.at (Dietmar Berg)
for the stack backtrace.
Jeremy (jallison@whistle.com)
(This used to be commit db4c2cb50e11d252ff3ba0e0973767e909dd33bd)
|
|
locking.c: Removed USE_OPLOCKS - now the default.
params.c: Removed unused variable.
proto.h: Updated.
reply.c: Removed USE_OPLOCKS - now the default.
server.c: Removed USE_OPLOCKS - now the default.
smb.h: Removed USE_OPLOCKS - now the default.
smbparse.c: Changed shadowed variable.
status.c: Removed USE_OPLOCKS - now the default.
util.c: Removed USE_OPLOCKS - now the default.
Jeremy (jallison@whistle.com)
(This used to be commit b93509846d6291771787af457500eec8984ee6bd)
|
|
(This used to be commit 5bc75c6c626251dc8ba04ff4a83e81b92d93d2d6)
|
|
lsaparse.c, smbparse.c, smb.h: more functions / structures.
proto.h: the usual.
(This used to be commit a1c718728c46ebf8916af8985b4dae4d099f4ec2)
|
|
(This used to be commit 2f722fe289051558dbe77aeb0a830bb3ded10a83)
|
|
(This used to be commit 369f7d41d6ff6d2b9b8c1e0cac99d0f0d03410b0)
|
|
added more structures, this time for the use in the query and response
of the LSA_XXXX functions. next target: the NTLOGON mailslots (10 minutes
work).
smbparse.c:
tidying. adding some more sub-structure functions.
(This used to be commit 095edfca783a6f99eb7897d4c925ce8bc1ea0a3e)
|
|
- recreated, as usual.
smb.h:
- added RPC_HDR structure - the 18 byte MSRPC header
smbparse.c:
- added smb_io_rpc_hdr() function to read/write the RPC_HDR structure.
util.c:
- added align2, align4, align_offset functions.
- added skip_unicode_string, unistrcpy, unistrncpy functions.
- modified unistrcpy and unistrncpy to return the number of unicode
characters returned, effectively making skip_unicode_string redundant.
(This used to be commit b0ad811cda3dcffed5b24104229813cdb17b014f)
|
|
or SXXXX as appropriate.
added some for-loop pointer macros that will do a batch of data into a
(fixed length) buffer. no length validation is done in the macro itself.
note: there are some CAREFUL_ALIGNMENT macros missing. i think.
(This used to be commit b0ffd75acfd3660512cccecdf50a183c3abccfcb)
|
|
of SMB or Mailslot packets.
(This used to be commit 4b3f9b281b3b1c1064992d19fef1d782dc6f1ff1)
|
|
(This used to be commit 297d5ef46ccba99596610c4c6a09399af665f2cf)
|
|
(This used to be commit 25b7ada3587d1fe68164a2339d7f0fbcecf18e53)
|
|
(This used to be commit d40199f4fe1344058267859820cb36b77a20442a)
|
|
(This used to be commit 0eb9a590430c328e6ebc46ff8ab05f181921769a)
|
|
smbclient+netmon
If we want to start supporting NT error codes in Samba (which may be
forced upon us by buggy apps) then this is a good start.
(This used to be commit 20bfde40b20f43cf8c6714ab9fb5a3fd17bc1575)
|
|
by Tim Towers <tim@lorien.demon.co.uk>. Note: Not yet checked.
(This used to be commit 332f78bbc945c327069e9c9e29c7137c8cbd5c02)
|
|
I've added a -r option. When specified, nmblookup will attempt to bind
to port 137. In order for this to work, the user must be root and the
port must be available (i.e., nmbd not running). If either condition is
not met, nmblookup will default to normal behavior; it will try to bind
to a free port above 7999. I also removed an artifact. The -p <port>
option was being accepted but falling through to the default, which was
the usage message. I removed "p:" from the getopt() list.
params.c:
Rewritten. The scanning is much more linear, and I found and fixed a
few bugs. I don't like the way that the scratch buffer is handled,
but I believe that it is an improvement over the previous version.
Chris -)-----
(This used to be commit 09dc951f2acd67da9d895e8e00c01e7abbbe0960)
|
|
more often than you might think (reproduced here with 4 clients
and netbench :-).
Raising debug log level for report from 1 to 3.
Jeremy (jallison@whistle.com)
(This used to be commit 23eeab7aa2e9c935e1f48ce3449544c03c1c899f)
|
|
non-zero op_type fields. Paranoia code really.
Jeremy (jallison@whistle.com)
(This used to be commit 21ecb46f56ac0f341803d0552c981e517d0322cb)
|
|
solaris crashes.
reply.c: Added NT specific error code. Put oplock break code in correct place
in reply_lockingX.
server.c: Removed unneeded error mapping stuff.
Fixed race condition in oplock code.
trans2.c: Added NT specific error code.
util.c: Added paranoia check in interpret_addr. Some core dumps
reported here. Upped fcntl debug levels.
Andrew. Please check the NT specific error code handling (search
for the string "/* Ugly - NT specific hack - but needed (JRA) */",
this makes NT and 95 clients behave correctly here - please check
your Visual Basic apps with this code.
Jeremy (jallison@whistle.com).
(This used to be commit 97ee4a5f69bd9cfbbc8710a1a04d80db0ee40104)
|
|
set granted_oplock=False at the start of open_file(). This is
paranoia.
(This used to be commit c7f09ffd4a00ef7266e3f54536ee6aaca9335fb8)
|
|
server.c: Updated after netbench observation. Oplocks must be
broken *before* share modes are checked, not after. Netbench seems
to be working now.
smb.h: Added offsets for oplock break time fields.
trans2.c: Upped debug messages.
util.c: Upped debug messages.
Jeremy (jallison@whistle.com)
(This used to be commit bc4b70c566ed5fa926441fb64a0f756a6137d8d0)
|
|
change from ERRbaddirectory to ERRbadpath for ENOTDIR errors. This
reverts to the old Samba code. I've done quite a bit of testing
against NT4 and have yet to get it to produce the ERRbaddirectory
error code. Producing ERRbaddirectory made a visual basic application
that was sent to me not run. This might explain some of the "it
doesn't work any more" complaints we've got about 1.9.17.
Jeremy, can you remember how you got NT to produce ERRbaddirectory?
There might be some specific circumstances we need to cover.
(This used to be commit 1ed901ddffef48cdce87017bab0fd613e6ca8637)
|
|
Jeremy (jallison@whistle.com)
(This used to be commit 4f29dfbc791f1f08c8c44a6fbdd0bc31892455dd)
|
|
setting applies to all shares regardless of any settings on other
shares. This allows us to immediately drop a connection if it does not
come from a allowed host, without even parsing the first SMB
packet. The next time we get a nasty security hole we can offer people
the option of just setting their hosts allow line.
If we drop a connection in this way we generate a "Not listening for
calling name" response and then exit.
add a per share "oplocks" option in smb.conf. I think its important to
be able to disable oplocks on a per-share basis as there are occasions
then they are definately not wanted, for example when sharing data
between a windows box and a unix application. This also allows us to
tell people "try disabling oplocks" when diagnosing problems.
fix a bug in process_smb(). It was taking the length of the packet
from outbuf, not inbuf (this bug was introduced with the oplocks
code). Jeremy, I assume this wasn't deliberate?
(This used to be commit 44bc9f239aa0b3cdf6cf9ad8d3911e397eba7335)
|
|
Jeremy (jallison@whistle.com)
(This used to be commit cb83c74a6ccfc44721af65b75625a949782c758a)
|
|
Jeremy (jallison@whistle.com)
(This used to be commit 90484db0bfe25a096def627f94be24f3fa243375)
|
|
Yipeee. At least as far as I can check in a short time :-).
local.h: Changed OPLOCK_BREAK_TIMEOUT to 30 seconds.
locking.c: Big changes to delete oplocks on a share mode entry.
proto.h: updated.
reply.c: Added oplock break code in lockingX reply & readbraw reply.
server.c: Add batch oplock code. Force server shutdown if client fails
to respond to oplock break.
smb.h: Fix silly slow share mode oplock define bug.
status.c: Add oplock status info.
Jeremy (jallison@whistle.com)
(This used to be commit 4c83d37239f15f855fc10f01d7b4bf4217fb9eda)
|
|
Jeremy (jallison@whistle.com)
(This used to be commit 6dbe5ad80ff368efdd81ec92d71d7567595157f1)
|
|
local.h: Add OPLOCK_BREAK_TIMEOUT.
password.c: Fix for paranoia password server security bug.
proto.h: Updated.
reply.c: Oplock changes.
server.c: Massive oplock changes - nearly there....
smb.h: oplock definitions.
util.c: Add local message processing queues for oplocks.
Jeremy (jallison@whistle.com)
(This used to be commit 92f1553db2cdf6f32881eb984a87050cf3e4760b)
|
|
Jeremy (jallison@whistle.com).
(This used to be commit b11833f1bdecf1c3c3e5bc7494741605cba92a1e)
|
|
so should have no effect on other work.
Jeremy (jallison@whistle.com)
(This used to be commit 7e3d4c8b21f63a06d32605d230129e36883ad08c)
|
|
revision). This will now be the current revision.
Jeremy (jallison@whistle.com)
(This used to be commit eb55ddd5bff1c6f95292215a8c53acb6bfdadeb2)
|
|
Jeremy (jallison@whistle.com)
(This used to be commit e7eb1f044d3101679dc7a118820ea5efe0cd837c)
|
|
(This used to be commit 2c5587a6fe425b1cc57cf28e92e77ba84f08ce33)
|
|
they got lost.
Jeremy (jallison@whistle.com).
(This used to be commit ce9cdc2f6175e4a6195f8875360cd945ae60052c)
|