summaryrefslogtreecommitdiff
path: root/docs/docbook/manpages
diff options
context:
space:
mode:
Diffstat (limited to 'docs/docbook/manpages')
-rw-r--r--docs/docbook/manpages/swat.8.sgml202
1 files changed, 202 insertions, 0 deletions
diff --git a/docs/docbook/manpages/swat.8.sgml b/docs/docbook/manpages/swat.8.sgml
new file mode 100644
index 0000000000..7d9540418e
--- /dev/null
+++ b/docs/docbook/manpages/swat.8.sgml
@@ -0,0 +1,202 @@
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="swat">
+
+<refmeta>
+ <refentrytitle>swat</refentrytitle>
+ <manvolnum>8</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+ <refname>swat</refname>
+ <refpurpose>Samba Web Administration Tool</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+ <cmdsynopsis>
+ <command>nmblookup</command>
+ <arg choice="opt">-s &lt;smb config file&gt;</arg>
+ <arg choice="opt">-a</arg>
+ </cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+ <title>DESCRIPTION</title>
+
+ <para>This tool is part of the <ulink url="samba.7.html">
+ Samba</ulink> suite.</para>
+
+
+ <para><command>swat</command> allows a Samba administrator to
+ configure the complex <ulink url="smb.conf.5.html"><filename>
+ smb.conf(5)</filename></ulink> file via a Web browser. In addition,
+ a <command>swat</command> configuration page has help links
+ to all the configurable options in the smb.conf file allowing an
+ administrator to easily look up the effects of any change. </para>
+
+ <para>swat is run from inetd </para>
+</refsect1>
+
+
+<refsect1>
+ <title>OPTIONS</title>
+
+ <variablelist>
+ <varlistentry>
+ <term>-s smb configuration file</term>
+ <listitem><para>The default configuration file path is
+ determined at compile time. The file specified contains
+ the configuration details required by the <command>smbd
+ </command> server. This is the file that swat will modify.
+ The information in this file includes server-specific
+ information such as what printcap file to use, as well as
+ descriptions of all the services that the server is to provide.
+ See <filename>smb.conf</filename> for more information.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-a</term>
+ <listitem><para>This option disables authentication and puts
+ swat in demo mode. In that mode anyone will be able to modify
+ the smb.conf file. </para>
+
+ <para><emphasis>Do NOT enable this option on a production
+ server. </emphasis></para></listitem>
+ </varlistentry>
+ </variablelist>
+
+
+<RefSect1><title>Installation</title>
+
+<para>After
+you compile SWAT you need to run "make install" <ItemizedList MARK=Bullet>
+<term>to install the </term><listitem><para>swat binary
+and the various help files and images. A default install would put these
+in: </para></listitem>
+</ItemizedList>
+
+
+<para> <BR>
+ <BR>
+/usr/local/samba/bin/swat<BR>
+/usr/local/samba/swat/images/*<BR>
+/usr/local/samba/swat/help/*<BR>
+ <BR>
+
+
+<para></RefSect1>
+
+<RefSect1><title>Inetd Installation</title>
+
+<para>You need to edit your CW/etc/inetd.conf and CW/etc/services
+to enable SWAT to be launched via inetd.
+
+<para>In CW/etc/services you need to
+add a line like this:
+
+<para>CWswat 901/tcp
+
+<para>Note for NIS/YP users -
+you may need to rebuild the NIS service maps rather than alter your local
+CW/etc/services file.
+
+<para>the choice of port number isn't really important except
+that it should be less than 1024 and not currently used (using a number
+above 1024 presents an obscure security hole depending on the implementation
+details of your inetd daemon).
+
+<para>In CW/etc/inetd.conf you should add a line
+like this:
+
+<para>CWswat stream tcp nowait.400 root /usr/local/samba/bin/swat
+swat
+
+<para>One you have edited CW/etc/services and CW/etc/inetd.conf you need
+to send a HUP signal to inetd. To do this use CW"kill -1 PID" where PID is
+the process ID of the inetd daemon.
+
+<para></RefSect1>
+
+<RefSect1><title>Launching</title>
+
+<para>To launch swat just run your
+favorite web browser and point it at CW<Command>http://localhost:901/.</Command>
+
+<para>Note that
+you can attach to swat from any IP connected machine but connecting from
+a remote machine leaves your connection open to password sniffing as passwords
+will be sent in the clear over the wire.
+
+<para></RefSect1>
+
+<RefSect1><title>Files</title>
+
+<para>/etc/inetd.conf
+
+<para>This file must
+contain suitable startup information for the meta-daemon.
+
+<para>/etc/services
+
+
+<para>This file must contain a mapping of service name (e.g., swat) to service
+port (e.g., 901) and protocol type (e.g., tcp).
+
+<para>/usr/local/samba/lib/smb.conf
+
+
+<para>This is the default location of the <I>smb.conf</I> server configuration file that
+swat edits. Other common places that systems install this file are <I>/usr/samba/lib/smb.conf</I>
+and <I>/etc/smb.conf</I>.
+
+<para>This file describes all the services the server is to
+make available to clients. See <Command>smb.conf (5)</Command> for more information.
+
+<para></RefSect1>
+
+<refsect1>
+ <title>WANRNIGS</title>
+
+ <para><command>swat</command> will rewrite your <filename>smb.conf
+ </filename> file. It will rearrange the entries and delete all
+ comments, <parameter>include=</parameter> and <parameter>copy="
+ </parameter> options. If you have a carefully crafted <filename>
+ smb.conf</filanem> then back it up or don't use swat! </para>
+</refsect1>
+
+
+<refsect1>
+ <title>VERSION</title>
+
+ <para>This man page is correct for version 2.2 of
+ the Samba suite.</para>
+</refsect1>
+
+<refsect1>
+ <title>SEE ALSO</title>
+ <para><command>inetd(5)</command>,
+ <ulink url="smbd.8.html"><command>smbd(8)</command></ulink>,
+ <ulink url="smb.conf.5.html">smb.conf(5)</ulink>
+ </para>
+</refsect1>
+
+<refsect1>
+ <title>AUTHOR</title>
+
+ <para>The original Samba software and related utilities
+ were created by Andrew Tridgell. Samba is now developed
+ by the Samba Team as an Open Source project similar
+ to the way the Linux kernel is developed.</para>
+
+ <para>The original Samba man pages were written by Karl Auer.
+ The man page sources were converted to YODL format (another
+ excellent piece of Open Source software, available at
+ <ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
+ ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0
+ release by Jeremy Allison. The conversion to DocBook for
+ Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>