summaryrefslogtreecommitdiff
path: root/docs/docbook
diff options
context:
space:
mode:
Diffstat (limited to 'docs/docbook')
-rw-r--r--docs/docbook/faq/clientapp.sgml101
-rw-r--r--docs/docbook/faq/config.sgml11
-rw-r--r--docs/docbook/faq/errors.sgml178
-rw-r--r--docs/docbook/faq/features.sgml376
-rw-r--r--docs/docbook/faq/general.sgml170
-rw-r--r--docs/docbook/faq/install.sgml333
-rw-r--r--docs/docbook/faq/sambafaq.sgml37
-rw-r--r--docs/docbook/projdoc/ADS-HOWTO.sgml167
-rw-r--r--docs/docbook/projdoc/AdvancedNetworkAdmin.sgml291
-rw-r--r--docs/docbook/projdoc/Bugs.sgml204
-rw-r--r--docs/docbook/projdoc/CUPS-printing.sgml1794
-rw-r--r--docs/docbook/projdoc/Compiling.sgml433
-rw-r--r--docs/docbook/projdoc/DOMAIN_MEMBER.sgml161
-rw-r--r--docs/docbook/projdoc/Diagnosis.sgml522
-rw-r--r--docs/docbook/projdoc/GROUP-MAPPING-HOWTO.sgml104
-rw-r--r--docs/docbook/projdoc/Integrating-with-Windows.sgml545
-rw-r--r--docs/docbook/projdoc/InterdomainTrusts.sgml222
-rw-r--r--docs/docbook/projdoc/IntroSMB.sgml361
-rw-r--r--docs/docbook/projdoc/NT4Migration.sgml507
-rw-r--r--docs/docbook/projdoc/NT_Security.sgml335
-rw-r--r--docs/docbook/projdoc/NetworkBrowsing.sgml1288
-rw-r--r--docs/docbook/projdoc/Other-Clients.sgml373
-rw-r--r--docs/docbook/projdoc/PAM-Authentication-And-Samba.sgml389
-rw-r--r--docs/docbook/projdoc/PolicyMgmt.sgml385
-rw-r--r--docs/docbook/projdoc/Portability.sgml235
-rw-r--r--docs/docbook/projdoc/Problems.sgml276
-rw-r--r--docs/docbook/projdoc/ProfileMgmt.sgml1126
-rw-r--r--docs/docbook/projdoc/SWAT.sgml351
-rw-r--r--docs/docbook/projdoc/Samba-BDC-HOWTO.sgml250
-rw-r--r--docs/docbook/projdoc/Samba-PDC-HOWTO.sgml842
-rw-r--r--docs/docbook/projdoc/ServerType.sgml143
-rw-r--r--docs/docbook/projdoc/Speed.sgml211
-rw-r--r--docs/docbook/projdoc/UNIX_INSTALL.sgml176
-rw-r--r--docs/docbook/projdoc/VFS.sgml230
-rw-r--r--docs/docbook/projdoc/locking.sgml396
-rw-r--r--docs/docbook/projdoc/msdfs_setup.sgml116
-rw-r--r--docs/docbook/projdoc/passdb.sgml972
-rw-r--r--docs/docbook/projdoc/printer_driver2.sgml1038
-rw-r--r--docs/docbook/projdoc/samba-doc.sgml129
-rw-r--r--docs/docbook/projdoc/securing-samba.sgml205
-rw-r--r--docs/docbook/projdoc/security_level.sgml340
-rw-r--r--docs/docbook/projdoc/unicode.sgml128
-rw-r--r--docs/docbook/projdoc/upgrading-to-3.0.sgml41
-rw-r--r--docs/docbook/projdoc/winbind.sgml1136
44 files changed, 0 insertions, 17628 deletions
diff --git a/docs/docbook/faq/clientapp.sgml b/docs/docbook/faq/clientapp.sgml
deleted file mode 100644
index 6d687bf772..0000000000
--- a/docs/docbook/faq/clientapp.sgml
+++ /dev/null
@@ -1,101 +0,0 @@
-<chapter id="ClientApp">
-<title>Specific client application problems</title>
-
-<sect1>
-<title>MS Office Setup reports "Cannot change properties of '\MSOFFICE\SETUP.INI'"</title>
-<para>
-When installing MS Office on a Samba drive for which you have admin
-user permissions, ie. admin users = username, you will find the
-setup program unable to complete the installation.
-</para>
-
-<para>
-To get around this problem, do the installation without admin user
-permissions The problem is that MS Office Setup checks that a file is
-rdonly by trying to open it for writing.
-</para>
-
-<para>
-Admin users can always open a file for writing, as they run as root.
-You just have to install as a non-admin user and then use "chown -R"
-to fix the owner.
-</para>
-
-</sect1>
-
-<sect1>
-<title>How to use a Samba share as an administrative share for MS Office, etc.</title>
-
-<para>
-Microsoft Office products can be installed as an administrative installation
-from which the application can either be run off the administratively installed
-product that resides on a shared resource, or from which that product can be
-installed onto workstation clients.
-</para>
-
-<para>
-The general mechanism for implementing an adminstrative installation involves
-running <command>X:\setup /A</command>, where X is the drive letter of either CDROM or floppy.
-</para>
-
-<para>
-This installation process will NOT install the product for use per se, but
-rather results in unpacking of the compressed distribution files into a target
-shared folder. For this process you need write privilidge to the share and it
-is desirable to enable file locking and share mode operation during this
-process.
-</para>
-
-<para>
-Subsequent installation of MS Office from this share will FAIL unless certain
-precautions are taken. This failure will be caused by share mode operation
-which will prevent the MS Office installation process from re-opening various
-dynamic link library files and will cause sporadic file not found problems.
-</para>
-
-<itemizedlist>
-<listitem><para>
-As soon as the administrative installation (unpacking) has completed
-set the following parameters on the share containing it:
-</para>
-
-<para><programlisting>
- [MSOP95]
- path = /where_you_put_it
- comment = Your comment
- volume = "The_CD_ROM_Label"
- read only = yes
- available = yes
- share modes = no
- locking = no
- browseable = yes
- public = yes
-</programlisting></para>
-
-</listitem>
-
-<listitem>
-<para>Now you are ready to run the setup program from the Microsoft Windows
-workstation as follows: <command>\\"Server_Name"\MSOP95\msoffice\setup</command>
-</para>
-</listitem>
-</itemizedlist>
-
-</sect1>
-
-<sect1>
-<title>Microsoft Access database opening errors</title>
-
-<para>
-Here are some notes on running MS-Access on a Samba drive from <ulink url="stefank@esi.com.au">Stefan Kjellberg</ulink>
-</para>
-
-<para><simplelist>
-<member>Opening a database in 'exclusive' mode does NOT work. Samba ignores r/w/share modes on file open.</member>
-<member>Make sure that you open the database as 'shared' and to 'lock modified records'</member>
-<member>Of course locking must be enabled for the particular share (smb.conf)</member>
-</simplelist>
-</para>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/faq/config.sgml b/docs/docbook/faq/config.sgml
deleted file mode 100644
index 78f73252a2..0000000000
--- a/docs/docbook/faq/config.sgml
+++ /dev/null
@@ -1,11 +0,0 @@
-<chapter id="Config">
-<title>Configuration problems</title>
-
-<sect1>
-<title>I have set 'force user' and samba still makes 'root' the owner of all the files I touch!</title>
-<para>
-When you have a user in 'admin users', samba will always do file operations for
-this user as 'root', even if 'force user' has been set.
-</para>
-</sect1>
-</chapter>
diff --git a/docs/docbook/faq/errors.sgml b/docs/docbook/faq/errors.sgml
deleted file mode 100644
index 6476ec064e..0000000000
--- a/docs/docbook/faq/errors.sgml
+++ /dev/null
@@ -1,178 +0,0 @@
-<chapter id="errors">
-
-<title>Common errors</title>
-
-<sect1>
-<title>Not listening for calling name</title>
-
-<para>
-<programlisting>
-Session request failed (131,129) with myname=HOBBES destname=CALVIN
-Not listening for calling name
-</programlisting>
-</para>
-
-<para>
-If you get this when talking to a Samba box then it means that your
-global "hosts allow" or "hosts deny" settings are causing the Samba
-server to refuse the connection.
-</para>
-
-<para>
-Look carefully at your "hosts allow" and "hosts deny" lines in the
-global section of smb.conf.
-</para>
-
-<para>
-It can also be a problem with reverse DNS lookups not functioning
-correctly, leading to the remote host identity not being able to
-be confirmed, but that is less likely.
-</para>
-</sect1>
-
-<sect1>
-<title>System Error 1240</title>
-
-<para>
-System error 1240 means that the client is refusing to talk
-to a non-encrypting server. Microsoft changed WinNT in service
-pack 3 to refuse to connect to servers that do not support
-SMB password encryption.
-</para>
-
-<para>There are two main solutions:
-<simplelist>
-<member>enable SMB password encryption in Samba. See the encryption part of
-the samba HOWTO Collection</member>
-
-<member>disable this new behaviour in NT. See the section about
-Windows NT in the chapter "Portability" of the samba HOWTO collection
-</member>
-</simplelist>
-</para>
-
-</sect1>
-
-<sect1>
-<title>smbclient ignores -N !</title>
-
-<para>
-<quote>When getting the list of shares available on a host using the command
-<command>smbclient -N -L</command>
-the program always prompts for the password if the server is a Samba server.
-It also ignores the "-N" argument when querying some (but not all) of our
-NT servers.
-</quote>
-</para>
-
-<para>
-No, it does not ignore -N, it is just that your server rejected the
-null password in the connection, so smbclient prompts for a password
-to try again.
-</para>
-
-<para>
-To get the behaviour that you probably want use <command>smbclient -L host -U%</command>
-</para>
-
-<para>
-This will set both the username and password to null, which is
-an anonymous login for SMB. Using -N would only set the password
-to null, and this is not accepted as an anonymous login for most
-SMB servers.
-</para>
-
-</sect1>
-
-<sect1>
-<title>The data on the CD-Drive I've shared seems to be corrupted!</title>
-
-<para>
-Some OSes (notably Linux) default to auto detection of file type on
-cdroms and do cr/lf translation. This is a very bad idea when use with
-Samba. It causes all sorts of stuff ups.
-</para>
-
-<para>
-To overcome this problem use conv=binary when mounting the cdrom
-before exporting it with Samba.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Why can users access home directories of other users?</title>
-
-<para>
-<quote>
-We are unable to keep individual users from mapping to any other user's
-home directory once they have supplied a valid password! They only need
-to enter their own password. I have not found *any* method that I can
-use to configure samba to enforce that only a user may map their own
-home directory.
-</quote>
-</para>
-
-<para><quote>
-User xyzzy can map his home directory. Once mapped user xyzzy can also map
-*anyone* elses home directory!
-</quote></para>
-
-<para>
-This is not a security flaw, it is by design. Samba allows
-users to have *exactly* the same access to the UNIX filesystem
-as they would if they were logged onto the UNIX box, except
-that it only allows such views onto the file system as are
-allowed by the defined shares.
-</para>
-
-<para>
-This means that if your UNIX home directories are set up
-such that one user can happily cd into another users
-directory and do an ls, the UNIX security solution is to
-change the UNIX file permissions on the users home directories
-such that the cd and ls would be denied.
-</para>
-
-<para>
-Samba tries very hard not to second guess the UNIX administrators
-security policies, and trusts the UNIX admin to set
-the policies and permissions he or she desires.
-</para>
-
-<para>
-Samba does allow the setup you require when you have set the
-"only user = yes" option on the share, is that you have not set the
-valid users list for the share.
-</para>
-
-<para>
-Note that only user works in conjunction with the users= list,
-so to get the behavior you require, add the line :
-<programlisting>
-users = %S
-</programlisting>
-this is equivalent to:
-<programlisting>
-valid users = %S
-</programlisting>
-to the definition of the [homes] share, as recommended in
-the smb.conf man page.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Until a few minutes after samba has started, clients get the error "Domain Controller Unavailable"</title>
-<para>
-A domain controller has to announce on the network who it is. This usually takes a while.
-</para>
-</sect1>
-
-<sect1>
-<title>I'm getting "open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested" in the logs</title>
-<para>Your loopback device isn't working correctly. Make sure it's running.
-</para>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/faq/features.sgml b/docs/docbook/faq/features.sgml
deleted file mode 100644
index bc1081e5c0..0000000000
--- a/docs/docbook/faq/features.sgml
+++ /dev/null
@@ -1,376 +0,0 @@
-<chapter id="features">
-
-<title>Features</title>
-
-<sect1>
-<title>How can I prevent my samba server from being used to distribute the Nimda worm?</title>
-
-<para>Author: HASEGAWA Yosuke (translated by <ulink url="monyo@samba.gr.jp">TAKAHASHI Motonobu</ulink>)</para>
-
-<para>
-Nimba Worm is infected through shared disks on a network, as well as through
-Microsoft IIS, Internet Explorer and mailer of Outlook series.
-</para>
-
-<para>
-At this time, the worm copies itself by the name *.nws and *.eml on
-the shared disk, moreover, by the name of Riched20.dll in the folder
-where *.doc file is included.
-</para>
-
-<para>
-To prevent infection through the shared disk offered by Samba, set
-up as follows:
-</para>
-
-<para>
-<programlisting>
-[global]
- ...
- # This can break Administration installations of Office2k.
- # in that case, don't veto the riched20.dll
- veto files = /*.eml/*.nws/riched20.dll/
-</programlisting>
-</para>
-
-<para>
-By setting the "veto files" parameter, matched files on the Samba
-server are completely hidden from the clients and making it impossible
-to access them at all.
-</para>
-
-<para>
-In addition to it, the following setting is also pointed out by the
-samba-jp:09448 thread: when the
-"readme.txt.{3050F4D8-98B5-11CF-BB82-00AA00BDCE0B}" file exists on
-a Samba server, it is visible only as "readme.txt" and dangerous
-code may be executed if this file is double-clicked.
-</para>
-
-<para>
-Setting the following,
-<programlisting>
- veto files = /*.{*}/
-</programlisting>
-any files having CLSID in its file extension will be inaccessible from any
-clients.
-</para>
-
-<para>
-This technical article is created based on the discussion of
-samba-jp:09448 and samba-jp:10900 threads.
-</para>
-</sect1>
-
-<sect1>
-<title>How can I use samba as a fax server?</title>
-
-<para>Contributor: <ulink url="mailto:zuber@berlin.snafu.de">Gerhard Zuber</ulink></para>
-
-<para>Requirements:
-<simplelist>
-<member>UNIX box (Linux preferred) with SAMBA and a faxmodem</member>
-<member>ghostscript package</member>
-<member>mgetty+sendfax package</member>
-<member>pbm package (portable bitmap tools)</member>
-</simplelist>
-</para>
-
-<para>First, install and configure the required packages. Be sure to read the mgetty+sendfax
-manual carefully.</para>
-
-<sect2>
-<title>Tools for printing faxes</title>
-
-<para>Your incomed faxes are in:
-<filename>/var/spool/fax/incoming</filename></para>
-
-<para>print it with:</para>
-
-<para><programlisting>
-for i in *
-do
-g3cat $i | g3tolj | lpr -P hp
-done
-</programlisting>
-</para>
-
-<para>
-g3cat is in the tools-section, g3tolj is in the contrib-section
-for printing to HP lasers.
-</para>
-
-<para>
-If you want to produce files for displaying and printing with Windows, use
-some tools from the pbm-package like the following command: <command>g3cat $i | g3topbm - | ppmtopcx - >$i.pcx</command>
-and view it with your favourite Windows tool (maybe paintbrush)
-</para>
-
-</sect2>
-
-<sect2>
-<title>Making the fax-server</title>
-
-<para>fetch the file <filename>mgetty+sendfax/frontends/winword/faxfilter</filename> and place it in <filename>/usr/local/etc/mgetty+sendfax/</filename>(replace /usr/local/ with whatever place you installed mgetty+sendfax)</para>
-
-<para>prepare your faxspool file as mentioned in this file
-edit fax/faxspool.in and reinstall or change the final
-/usr/local/bin/faxspool too.
-</para>
-
-<para><programlisting>
-if [ "$user" = "root" -o "$user" = "fax" -o \
- "$user" = "lp" -o "$user" = "daemon" -o "$user" = "bin" ]
-</programlisting></para>
-
-<para>find the first line and change it to the second.</para>
-
-<para>
-make sure you have pbmtext (from the pbm-package). This is
-needed for creating the small header line on each page.
-</para>
-
-<para>Prepare your faxheader <filename>/usr/local/etc/mgetty+sendfax/faxheader</filename></para>
-
-<para>
-Edit your /etc/printcap file:
-<programlisting>
-# FAX
-lp3|fax:\
- :lp=/dev/null:\
- :sd=/usr/spool/lp3:\
- :if=/usr/local/etc/mgetty+sendfax/faxfilter:sh:sf:mx#0:\
- :lf=/usr/spool/lp3/fax-log:
-</programlisting></para>
-
-<para>Now, edit your <filename>smb.conf</filename> so you have a smb based printer named "fax"</para>
-
-</sect2>
-
-<sect2>
-<title>Installing the client drivers</title>
-
-<para>
-Now you have a printer called "fax" which can be used via
-TCP/IP-printing (lpd-system) or via SAMBA (windows printing).
-</para>
-
-<para>
-On every system you are able to produce postscript-files you
-are ready to fax.
-</para>
-
-<para>
-On Windows 3.1 95 and NT:
-</para>
-
-<para>
-Install a printer wich produces postscript output,
- e.g. apple laserwriter
-</para>
-
-<para>Connect the "fax" to your printer.</para>
-
-<para>
-Now write your first fax. Use your favourite wordprocessor,
-write, winword, notepad or whatever you want, and start
-with the headerpage.
-</para>
-
-<para>
-Usually each fax has a header page. It carries your name,
-your address, your phone/fax-number.
-</para>
-
-<para>
-It carries also the recipient, his address and his *** fax
-number ***. Now here is the trick:
-</para>
-
-<para>
-Use the text:
-<programlisting>
-Fax-Nr: 123456789
-</programlisting>
-as the recipients fax-number. Make sure this text does not
-occur in regular text ! Make sure this text is not broken
-by formatting information, e.g. format it as a single entity.
-(Windows Write and Win95 Wordpad are functional, maybe newer
- versions of Winword are breaking formatting information).
-</para>
-
-<para>
-The trick is that postscript output is human readable and
-the faxfilter program scans the text for this pattern and
-uses the found number as the fax-destination-number.
-</para>
-
-<para>
-Now print your fax through the fax-printer and it will be
-queued for later transmission. Use faxrunq for sending the
-queue out.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Example smb.conf</title>
-
-<para><programlisting>
-[global]
- printcap name = /etc/printcap
- print command = /usr/bin/lpr -r -P %p %s
- lpq command = /usr/bin/lpq -P %p
- lprm command = /usr/bin/lprm -P %p %j
-
-[fax]
- comment = FAX (mgetty+sendfax)
- path = /tmp
- printable = yes
- public = yes
- writable = no
- create mode = 0700
- browseable = yes
- guest ok = no
-</programlisting></para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Samba doesn't work well together with DHCP!</title>
-
-<para>
-We wish to help those folks who wish to use the ISC DHCP Server and provide
-sample configuration settings. Most operating systems today come ship with
-the ISC DHCP Server. ISC DHCP is available from:
-<ulink url="ftp://ftp.isc.org/isc/dhcp">ftp://ftp.isc.org/isc/dhcp</ulink>
-</para>
-
-<para>
-Incorrect configuration of MS Windows clients (Windows9X, Windows ME, Windows
-NT/2000) will lead to problems with browsing and with general network
-operation. Windows 9X/ME users often report problems where the TCP/IP and related
-network settings will inadvertantly become reset at machine start-up resulting
-in loss of configuration settings. This results in increased maintenance
-overheads as well as serious user frustration.
-</para>
-
-<para>
-In recent times users on one mailing list incorrectly attributed the cause of
-network operating problems to incorrect configuration of Samba.
-</para>
-
-<para>
-One user insisted that the only way to provent Windows95 from periodically
-performing a full system reset and hardware detection process on start-up was
-to install the NetBEUI protocol in addition to TCP/IP. This assertion is not
-correct.
-</para>
-
-<para>
-In the first place, there is NO need for NetBEUI. All Microsoft Windows clients
-natively run NetBIOS over TCP/IP, and that is the only protocol that is
-recognised by Samba. Installation of NetBEUI and/or NetBIOS over IPX will
-cause problems with browse list operation on most networks. Even Windows NT
-networks experience these problems when incorrectly configured Windows95
-systems share the same name space. It is important that only those protocols
-that are strictly needed for site specific reasons should EVER be installed.
-</para>
-
-<para>
-Secondly, and totally against common opinion, DHCP is NOT an evil design but is
-an extension of the BOOTP protocol that has been in use in Unix environments
-for many years without any of the melt-down problems that some sensationalists
-would have us believe can be experienced with DHCP. In fact, DHCP in covered by
-rfc1541 and is a very safe method of keeping an MS Windows desktop environment
-under control and for ensuring stable network operation.
-</para>
-
-<para>
-Please note that MS Windows systems as of MS Windows NT 3.1 and MS Windows 95
-store all network configuration settings a registry. There are a few reports
-from MS Windows network administrators that warrant mention here. It would appear
-that when one sets certain MS TCP/IP protocol settings (either directly or via
-DHCP) that these do get written to the registry. Even though a subsequent
-change of setting may occur the old value may persist in the registry. This
-has been known to create serious networking problems.
-</para>
-
-<para>
-An example of this occurs when a manual TCP/IP environment is configured to
-include a NetBIOS Scope. In this event, when the administrator then changes the
-configuration of the MS TCP/IP protocol stack, without first deleting the
-current settings, by simply checking the box to configure the MS TCP/IP stack
-via DHCP then the NetBIOS Scope that is still persistent in the registry WILL be
-applied to the resulting DHCP offered settings UNLESS the DHCP server also sets
-a NetBIOS Scope. It may therefore be prudent to forcibly apply a NULL NetBIOS
-Scope from your DHCP server. The can be done in the dhcpd.conf file with the
-parameter:
-<command>option netbios-scope "";</command>
-</para>
-
-<para>
-While it is true that the Microsoft DHCP server that comes with Windows NT
-Server provides only a sub-set of rfc1533 functionality this is hardly an issue
-in those sites that already have a large investment and commitment to Unix
-systems and technologies. The current state of the art of the DHCP Server
-specification in covered in rfc2132.
-</para>
-
-</sect1>
-
-<sect1>
-<title>How can I assign NetBIOS names to clients with DHCP?</title>
-
-<para>
-SMB network clients need to be configured so that all standard TCP/IP name to
-address resolution works correctly. Once this has been achieved the SMB
-environment provides additional tools and services that act as helper agents in
-the translation of SMB (NetBIOS) names to their appropriate IP Addresses. One
-such helper agent is the NetBIOS Name Server (NBNS) or as Microsoft called it
-in their Windows NT Server implementation WINS (Windows Internet Name Server).
-</para>
-
-<para>
-A client needs to be configured so that it has a unique Machine (Computer)
-Name.
-</para>
-
-<para>
-This can be done, but needs a few NT registry hacks and you need to be able to
-speak UNICODE, which is of course no problem for a True Wizzard(tm) :)
-Instructions on how to do this (including a small util for less capable
-Wizzards) can be found at
-</para>
-
-<para><ulink url="http://www.unixtools.org/~nneul/sw/nt/dhcp-netbios-hostname.html">http://www.unixtools.org/~nneul/sw/nt/dhcp-netbios-hostname.html</ulink></para>
-
-</sect1>
-
-<sect1>
-<title>How do I convert between unix and dos text formats?</title>
-
-<para>
-Jim barry has written an <ulink url="ftp://samba.org/pub/samba/contributed/fixcrlf.zip">
-excellent drag-and-drop cr/lf converter for
-windows</ulink>. Just drag your file onto the icon and it converts the file.
-</para>
-
-<para>
-The utilities unix2dos and dos2unix(in the mtools package) should do
-the job under unix.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Does samba have wins replication support?</title>
-
-<para>
-At the time of writing there is currently being worked on a wins replication implementation(wrepld).
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/faq/general.sgml b/docs/docbook/faq/general.sgml
deleted file mode 100644
index 38bcdf49e3..0000000000
--- a/docs/docbook/faq/general.sgml
+++ /dev/null
@@ -1,170 +0,0 @@
-<chapter id="general">
-<title>General Information</title>
-
-<sect1>
-<title>Where can I get it?</title>
-<para>
-The Samba suite is available at the <ulink url="http://samba.org/">samba website</ulink>.
-</para>
-</sect1>
-
-<sect1>
-<title>What do the version numbers mean?</title>
-<para>
-It is not recommended that you run a version of Samba with the word
-"alpha" in its name unless you know what you are doing and are willing
-to do some debugging. Many, many people just get the latest
-recommended stable release version and are happy. If you are brave, by
-all means take the plunge and help with the testing and development -
-but don't install it on your departmental server. Samba is typically
-very stable and safe, and this is mostly due to the policy of many
-public releases.
-</para>
-
-<para>
-How the scheme works:
-<simplelist>
-<member>When major changes are made the version number is increased. For
-example, the transition from 1.9.15 to 1.9.16. However, this version
-number will not appear immediately and people should continue to use
-1.9.15 for production systems (see next point.)</member>
-
-<member>Just after major changes are made the software is considered
-unstable, and a series of alpha releases are distributed, for example
-1.9.16alpha1. These are for testing by those who know what they are
-doing. The "alpha" in the filename will hopefully scare off those who
-are just looking for the latest version to install.</member>
-
-<member>When Andrew thinks that the alphas have stabilised to the point
-where he would recommend new users install it, he renames it to the
-same version number without the alpha, for example 1.9.16.</member>
-
-<member>Inevitably bugs are found in the "stable" releases and minor patch
-levels are released which give us the pXX series, for example 1.9.16p2.</member>
-</simplelist>
-</para>
-
-<para>
-So the progression goes:
-
-<programlisting>
-1.9.15p7 (production)
-1.9.15p8 (production)
-1.9.16alpha1 (test sites only)
-:
-1.9.16alpha20 (test sites only)
-1.9.16 (production)
-1.9.16p1 (production)
-</programlisting>
-</para>
-
-<para>
-The above system means that whenever someone looks at the samba ftp
-site they will be able to grab the highest numbered release without an
-alpha in the name and be sure of getting the current recommended
-version.
-</para>
-
-</sect1>
-
-<sect1>
-<title>What platforms are supported?</title>
-<para>
-Many different platforms have run Samba successfully. The platforms
-most widely used and thus best tested are Linux and SunOS.</para>
-
-<para>
-At time of writing, there is support (or has been support for in earlier
-versions):
-</para>
-
-<simplelist>
-<member>A/UX 3.0</member>
-<member>AIX</member>
-<member>Altos Series 386/1000</member>
-<member>Amiga</member>
-<member>Apollo Domain/OS sr10.3</member>
-<member>BSDI </member>
-<member>B.O.S. (Bull Operating System)</member>
-<member>Cray, Unicos 8.0</member>
-<member>Convex</member>
-<member>DGUX. </member>
-<member>DNIX.</member>
-<member>FreeBSD</member>
-<member>HP-UX</member>
-<member>Intergraph. </member>
-<member>Linux with/without shadow passwords and quota</member>
-<member>LYNX 2.3.0</member>
-<member>MachTen (a unix like system for Macintoshes)</member>
-<member>Motorola 88xxx/9xx range of machines</member>
-<member>NetBSD</member>
-<member>NEXTSTEP Release 2.X, 3.0 and greater (including OPENSTEP for Mach).</member>
-<member>OS/2 using EMX 0.9b</member>
-<member>OSF1</member>
-<member>QNX 4.22</member>
-<member>RiscIX. </member>
-<member>RISCOs 5.0B</member>
-<member>SEQUENT. </member>
-<member>SCO (including: 3.2v2, European dist., OpenServer 5)</member>
-<member>SGI.</member>
-<member>SMP_DC.OSx v1.1-94c079 on Pyramid S series</member>
-<member>SONY NEWS, NEWS-OS (4.2.x and 6.1.x)</member>
-<member>SUNOS 4</member>
-<member>SUNOS 5.2, 5.3, and 5.4 (Solaris 2.2, 2.3, and '2.4 and later')</member>
-<member>Sunsoft ISC SVR3V4</member>
-<member>SVR4</member>
-<member>System V with some berkely extensions (Motorola 88k R32V3.2).</member>
-<member>ULTRIX.</member>
-<member>UNIXWARE</member>
-<member>UXP/DS</member>
-</simplelist>
-
-</sect1>
-
-<sect1>
-<title>How do I subscribe to the Samba Mailing Lists?</title>
-<para>
-Look at <ulink url="http://samba.org/samba/archives.html">the samba mailing list page</ulink>
-</para>
-</sect1>
-
-<sect1>
-<title>Pizza supply details</title>
-<para>
-Those who have registered in the Samba survey as "Pizza Factory" will
-already know this, but the rest may need some help. Andrew doesn't ask
-for payment, but he does appreciate it when people give him
-pizza. This calls for a little organisation when the pizza donor is
-twenty thousand kilometres away, but it has been done.
-</para>
-
-<para>
-Method 1: Ring up your local branch of an international pizza chain
-and see if they honour their vouchers internationally. Pizza Hut do,
-which is how the entire Canberra Linux Users Group got to eat pizza
-one night, courtesy of someone in the US.
-</para>
-
-<para>
-Method 2: Ring up a local pizza shop in Canberra and quote a credit
-card number for a certain amount, and tell them that Andrew will be
-collecting it (don't forget to tell him.) One kind soul from Germany
-did this.
-</para>
-
-<para>
-Method 3: Purchase a pizza voucher from your local pizza shop that has
-no international affiliations and send it to Andrew. It is completely
-useless but he can hang it on the wall next to the one he already has
-from Germany :-)
-</para>
-
-<para>
-Method 4: Air freight him a pizza with your favourite regional
-flavours. It will probably get stuck in customs or torn apart by
-hungry sniffer dogs but it will have been a noble gesture.
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/faq/install.sgml b/docs/docbook/faq/install.sgml
deleted file mode 100644
index 88520fc71d..0000000000
--- a/docs/docbook/faq/install.sgml
+++ /dev/null
@@ -1,333 +0,0 @@
-<chapter id="Install">
-<title>Compiling and installing Samba on a Unix host</title>
-
-<sect1>
-<title>I can't see the Samba server in any browse lists!</title>
-<para>
-See Browsing.html in the docs directory of the samba source
-for more information on browsing.
-</para>
-
-<para>
-If your GUI client does not permit you to select non-browsable
-servers, you may need to do so on the command line. For example, under
-Lan Manager you might connect to the above service as disk drive M:
-thusly:
-<programlisting>
- net use M: \\mary\fred
-</programlisting>
-The details of how to do this and the specific syntax varies from
-client to client - check your client's documentation.
-</para>
-</sect1>
-
-<sect1>
-<title>Some files that I KNOW are on the server doesn't show up when I view the files from my client!</title>
-<para>See the next question.</para>
-</sect1>
-
-<sect1>
-<title>Some files on the server show up with really wierd filenames when I view the files from my client!</title>
-<para>
-If you check what files are not showing up, you will note that they
-are files which contain upper case letters or which are otherwise not
-DOS-compatible (ie, they are not legal DOS filenames for some reason).
-</para>
-
-<para>
-The Samba server can be configured either to ignore such files
-completely, or to present them to the client in "mangled" form. If you
-are not seeing the files at all, the Samba server has most likely been
-configured to ignore them. Consult the man page smb.conf(5) for
-details of how to change this - the parameter you need to set is
-"mangled names = yes".
-</para>
-</sect1>
-
-<sect1>
-<title>My client reports "cannot locate specified computer" or similar</title>
-<para>
-This indicates one of three things: You supplied an incorrect server
-name, the underlying TCP/IP layer is not working correctly, or the
-name you specified cannot be resolved.
-</para>
-
-<para>
-After carefully checking that the name you typed is the name you
-should have typed, try doing things like pinging a host or telnetting
-to somewhere on your network to see if TCP/IP is functioning OK. If it
-is, the problem is most likely name resolution.
-</para>
-
-<para>
-If your client has a facility to do so, hardcode a mapping between the
-hosts IP and the name you want to use. For example, with Lan Manager
-or Windows for Workgroups you would put a suitable entry in the file
-LMHOSTS. If this works, the problem is in the communication between
-your client and the netbios name server. If it does not work, then
-there is something fundamental wrong with your naming and the solution
-is beyond the scope of this document.
-</para>
-
-<para>
-If you do not have any server on your subnet supplying netbios name
-resolution, hardcoded mappings are your only option. If you DO have a
-netbios name server running (such as the Samba suite's nmbd program),
-the problem probably lies in the way it is set up. Refer to Section
-Two of this FAQ for more ideas.
-</para>
-
-<para>
-By the way, remember to REMOVE the hardcoded mapping before further
-tests :-)
-</para>
-
-</sect1>
-
-<sect1>
-<title>My client reports "cannot locate specified share name" or similar</title>
-<para>
-This message indicates that your client CAN locate the specified
-server, which is a good start, but that it cannot find a service of
-the name you gave.
-</para>
-
-<para>
-The first step is to check the exact name of the service you are
-trying to connect to (consult your system administrator). Assuming it
-exists and you specified it correctly (read your client's docs on how
-to specify a service name correctly), read on:
-</para>
-
-<simplelist>
-<member>Many clients cannot accept or use service names longer than eight characters.</member>
-<member>Many clients cannot accept or use service names containing spaces.</member>
-<member>Some servers (not Samba though) are case sensitive with service names.</member>
-<member>Some clients force service names into upper case.</member>
-</simplelist>
-</sect1>
-
-<sect1>
-<title>Printing doesn't work</title>
-<para>
-Make sure that the specified print command for the service you are
-connecting to is correct and that it has a fully-qualified path (eg.,
-use "/usr/bin/lpr" rather than just "lpr").
-</para>
-
-<para>
-Make sure that the spool directory specified for the service is
-writable by the user connected to the service. In particular the user
-"nobody" often has problems with printing, even if it worked with an
-earlier version of Samba. Try creating another guest user other than
-"nobody".
-</para>
-
-<para>
-Make sure that the user specified in the service is permitted to use
-the printer.
-</para>
-
-<para>
-Check the debug log produced by smbd. Search for the printer name and
-see if the log turns up any clues. Note that error messages to do with
-a service ipc$ are meaningless - they relate to the way the client
-attempts to retrieve status information when using the LANMAN1
-protocol.
-</para>
-
-<para>
-If using WfWg then you need to set the default protocol to TCP/IP, not
-Netbeui. This is a WfWg bug.
-</para>
-
-<para>
-If using the Lanman1 protocol (the default) then try switching to
-coreplus. Also not that print status error messages don't mean
-printing won't work. The print status is received by a different
-mechanism.
-</para>
-</sect1>
-
-<sect1>
-<title>My client reports "This server is not configured to list shared resources"</title>
-<para>
-Your guest account is probably invalid for some reason. Samba uses the
-guest account for browsing in smbd. Check that your guest account is
-valid.
-</para>
-
-<para>See also 'guest account' in smb.conf man page.</para>
-
-</sect1>
-
-<sect1>
-<title>Log message "you appear to have a trapdoor uid system" </title>
-<para>
-This can have several causes. It might be because you are using a uid
-or gid of 65535 or -1. This is a VERY bad idea, and is a big security
-hole. Check carefully in your /etc/passwd file and make sure that no
-user has uid 65535 or -1. Especially check the "nobody" user, as many
-broken systems are shipped with nobody setup with a uid of 65535.
-</para>
-
-<para>It might also mean that your OS has a trapdoor uid/gid system :-)</para>
-
-<para>
-This means that once a process changes effective uid from root to
-another user it can't go back to root. Unfortunately Samba relies on
-being able to change effective uid from root to non-root and back
-again to implement its security policy. If your OS has a trapdoor uid
-system this won't work, and several things in Samba may break. Less
-things will break if you use user or server level security instead of
-the default share level security, but you may still strike
-problems.
-</para>
-
-<para>
-The problems don't give rise to any security holes, so don't panic,
-but it does mean some of Samba's capabilities will be unavailable.
-In particular you will not be able to connect to the Samba server as
-two different uids at once. This may happen if you try to print as a
-"guest" while accessing a share as a normal user. It may also affect
-your ability to list the available shares as this is normally done as
-the guest user.
-</para>
-
-<para>
-Complain to your OS vendor and ask them to fix their system.
-</para>
-
-<para>
-Note: the reason why 65535 is a VERY bad choice of uid and gid is that
-it casts to -1 as a uid, and the setreuid() system call ignores (with
-no error) uid changes to -1. This means any daemon attempting to run
-as uid 65535 will actually run as root. This is not good!
-</para>
-
-</sect1>
-
-<sect1>
-<title>Why are my file's timestamps off by an hour, or by a few hours?</title>
-<para>
-This is from Paul Eggert eggert@twinsun.com.
-</para>
-
-<para>
-Most likely it's a problem with your time zone settings.
-</para>
-
-<para>
-Internally, Samba maintains time in traditional Unix format,
-namely, the number of seconds since 1970-01-01 00:00:00 Universal Time
-(or ``GMT''), not counting leap seconds.
-</para>
-
-<para>
-On the server side, Samba uses the Unix TZ variable to convert
-internal timestamps to and from local time. So on the server side, there are
-two things to get right.
-<simplelist>
-<member>The Unix system clock must have the correct Universal time. Use the shell command "sh -c 'TZ=UTC0 date'" to check this.</member>
-<member>The TZ environment variable must be set on the server before Samba is invoked. The details of this depend on the server OS, but typically you must edit a file whose name is /etc/TIMEZONE or /etc/default/init, or run the command `zic -l'.</member>
-</simplelist>
-</para>
-
-<para>TZ must have the correct value.</para>
-
-<para>
-If possible, use geographical time zone settings
-(e.g. TZ='America/Los_Angeles' or perhaps
- TZ=':US/Pacific'). These are supported by most
-popular Unix OSes, are easier to get right, and are
-more accurate for historical timestamps. If your
-operating system has out-of-date tables, you should be
-able to update them from the public domain time zone
-tables at <ulink url="ftp://elsie.nci.nih.gov/pub/">ftp://elsie.nci.nih.gov/pub/</ulink>.
-</para>
-
-<para>If your system does not support geographical timezone
-settings, you must use a Posix-style TZ strings, e.g.
-TZ='PST8PDT,M4.1.0/2,M10.5.0/2' for US Pacific time.
-Posix TZ strings can take the following form (with optional
- items in brackets):
-<programlisting>
- StdOffset[Dst[Offset],Date/Time,Date/Time]
-</programlisting>
- where:
-</para>
-
-<para><simplelist>
-<member>`Std' is the standard time designation (e.g. `PST').</member>
-<member>`Offset' is the number of hours behind UTC (e.g. `8').
-Prepend a `-' if you are ahead of UTC, and
-append `:30' if you are at a half-hour offset.
-Omit all the remaining items if you do not use
-daylight-saving time.</member>
-
-<member>`Dst' is the daylight-saving time designation
-(e.g. `PDT').</member>
-
-<member>The optional second `Offset' is the number of
-hours that daylight-saving time is behind UTC.
-The default is 1 hour ahead of standard time.
-</member>
-
-<member>`Date/Time,Date/Time' specify when daylight-saving
-time starts and ends. The format for a date is
-`Mm.n.d', which specifies the dth day (0 is Sunday)
-of the nth week of the mth month, where week 5 means
-the last such day in the month. The format for a
-time is [h]h[:mm[:ss]], using a 24-hour clock.
-</member>
-
-</simplelist>
-</para>
-
-<para>
-Other Posix string formats are allowed but you don't want
-to know about them.</para>
-
-<para>
-On the client side, you must make sure that your client's clock and
-time zone is also set appropriately. [[I don't know how to do this.]]
-Samba traditionally has had many problems dealing with time zones, due
-to the bizarre ways that Microsoft network protocols handle time
-zones.
-</para>
-</sect1>
-
-<sect1>
-<title>How do I set the printer driver name correctly?</title>
-<para>Question:
-<quote> On NT, I opened "Printer Manager" and "Connect to Printer".
- Enter ["\\ptdi270\ps1"] in the box of printer. I got the
- following error message
- </quote></para>
- <para>
- <programlisting>
- You do not have sufficient access to your machine
- to connect to the selected printer, since a driver
- needs to be installed locally.
- </programlisting>
- </para>
-
- <para>Answer:</para>
-
- <para>In the more recent versions of Samba you can now set the "printer
-driver" in smb.conf. This tells the client what driver to use. For
-example:</para>
-<para><programlisting>
- printer driver = HP LaserJet 4L
-</programlisting></para>
-<para>With this, NT knows to use the right driver. You have to get this string
-exactly right.</para>
-
-<para>To find the exact string to use, you need to get to the dialog box in
-your client where you select which printer driver to install. The
-correct strings for all the different printers are shown in a listbox
-in that dialog box.</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/faq/sambafaq.sgml b/docs/docbook/faq/sambafaq.sgml
deleted file mode 100644
index e9e5ed7a3c..0000000000
--- a/docs/docbook/faq/sambafaq.sgml
+++ /dev/null
@@ -1,37 +0,0 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-<!ENTITY general SYSTEM "general.sgml">
-<!ENTITY install SYSTEM "install.sgml">
-<!ENTITY errors SYSTEM "errors.sgml">
-<!ENTITY clientapp SYSTEM "clientapp.sgml">
-<!ENTITY features SYSTEM "features.sgml">
-<!ENTITY config SYSTEM "config.sgml">
-]>
-
-<book id="Samba-FAQ">
-<title>Samba FAQ</title>
-
-<bookinfo>
- <author><surname>Samba Team</surname></author>
- <pubdate>October 2002</pubdate>
-</bookinfo>
-
-<dedication>
-<para>
-This is the Frequently Asked Questions (FAQ) document for
-Samba, the free and very popular SMB server product. An SMB server
-allows file and printer connections from clients such as Windows,
-OS/2, Linux and others. Current to version 3.0. Please send any
-corrections to the samba documentation mailinglist at
-<ulink url="mailto:samba-doc@samba.org">samba-doc@samba.org</ulink>.
-This FAQ was based on the old Samba FAQ by Dan Shearer and Paul Blackman,
-and the old samba text documents which were mostly written by John Terpstra.
-</para>
-</dedication>
-
-&general;
-&install;
-&config;
-&clientapp;
-&errors;
-&features;
-</book>
diff --git a/docs/docbook/projdoc/ADS-HOWTO.sgml b/docs/docbook/projdoc/ADS-HOWTO.sgml
deleted file mode 100644
index c89a0e4f87..0000000000
--- a/docs/docbook/projdoc/ADS-HOWTO.sgml
+++ /dev/null
@@ -1,167 +0,0 @@
-<chapter id="ADS">
-
-<chapterinfo>
- &author.tridge;
- &author.jelmer;
- <pubdate>2002/2003</pubdate>
-</chapterinfo>
-
-<title>Samba as a ADS domain member</title>
-
-<para>
-This is a rough guide to setting up Samba 3.0 with kerberos authentication against a
-Windows2000 KDC.
-</para>
-
-<sect1>
-<title>Setup your <filename>smb.conf</filename></title>
-
-<para>You must use at least the following 3 options in smb.conf:</para>
-
-<para><programlisting>
- realm = YOUR.KERBEROS.REALM
- security = ADS
- encrypt passwords = yes
-</programlisting></para>
-
-<para>
-In case samba can't figure out your ads server using your realm name, use the
-<command>ads server</command> option in <filename>smb.conf</filename>:
-<programlisting>
- ads server = your.kerberos.server
-</programlisting>
-</para>
-
-<note><para>You do *not* need a smbpasswd file, and older clients will
- be authenticated as if <command>security = domain</command>,
- although it won't do any harm
- and allows you to have local users not in the domain.
- I expect that the above required options will change soon when we get better
- active directory integration.</para></note>
-
-</sect1>
-
-<sect1>
-<title>Setup your <filename>/etc/krb5.conf</filename></title>
-
-<para>Note: you will need the krb5 workstation, devel, and libs installed</para>
-
-<para>The minimal configuration for <filename>krb5.conf</filename> is:</para>
-
-<para><programlisting>
- [realms]
- YOUR.KERBEROS.REALM = {
- kdc = your.kerberos.server
- }
-</programlisting></para>
-
-<para>Test your config by doing a <userinput>kinit
-<replaceable>USERNAME</replaceable>@<replaceable>REALM</replaceable></userinput> and
-making sure that your password is accepted by the Win2000 KDC.
-</para>
-
-<note><para>The realm must be uppercase or you will get "Cannot find KDC for requested
-realm while getting initial credentials" error </para></note>
-
-<note><para>Time between the two servers must be synchronized. You will get a
-"kinit(v5): Clock skew too great while getting initial credentials" if the time
-difference is more than five minutes. </para></note>
-
-<para>
-You also must ensure that you can do a reverse DNS lookup on the IP
-address of your KDC. Also, the name that this reverse lookup maps to
-must either be the netbios name of the KDC (ie. the hostname with no
-domain attached) or it can alternatively be the netbios name
-followed by the realm.
-</para>
-
-<para>
-The easiest way to ensure you get this right is to add a
-<filename>/etc/hosts</filename> entry mapping the IP address of your KDC to
-its netbios name. If you don't get this right then you will get a
-"local error" when you try to join the realm.
-</para>
-
-<para>
-If all you want is kerberos support in &smbclient; then you can skip
-straight to <link linkend="ads-test-smbclient">Test with &smbclient;</link> now.
-<link linkend="ads-create-machine-account">Creating a computer account</link>
-and <link linkend="ads-test-server">testing your servers</link>
-is only needed if you want kerberos support for &smbd; and &winbindd;.
-</para>
-
-</sect1>
-
-<sect1 id="ads-create-machine-account">
-<title>Create the computer account</title>
-
-<para>
-As a user that has write permission on the Samba private directory
-(usually root) run:
-<programlisting>
- <userinput>net join -U Administrator%password</userinput>
-</programlisting>
-</para>
-
-<sect2>
-<title>Possible errors</title>
-
-<para>
-<variablelist>
- <varlistentry><term>"ADS support not compiled in"</term>
- <listitem><para>Samba must be reconfigured (remove config.cache) and recompiled
- (make clean all install) after the kerberos libs and headers are installed.
- </para></listitem></varlistentry>
-
- <varlistentry><term>net join prompts for user name</term>
- <listitem><para>You need to login to the domain using <userinput>kinit
- <replaceable>USERNAME</replaceable>@<replaceable>REALM</replaceable></userinput>.
- <replaceable>USERNAME</replaceable> must be a user who has rights to add a machine
- to the domain. </para></listitem></varlistentry>
-</variablelist>
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1 id="ads-test-server">
-<title>Test your server setup</title>
-
-<para>
-If the join was successful, you will see a new computer account with the
-NetBIOS name of your Samba server in Active Directory (in the "Computers"
-folder under Users and Computers.
-</para>
-
-<para>
-On a Windows 2000 client try <userinput>net use * \\server\share</userinput>. You should
-be logged in with kerberos without needing to know a password. If
-this fails then run <userinput>klist tickets</userinput>. Did you get a ticket for the
-server? Does it have an encoding type of DES-CBC-MD5 ?
-</para>
-
-</sect1>
-
-<sect1 id="ads-test-smbclient">
-<title>Testing with &smbclient;</title>
-
-<para>
-On your Samba server try to login to a Win2000 server or your Samba
-server using &smbclient; and kerberos. Use &smbclient; as usual, but
-specify the <parameter>-k</parameter> option to choose kerberos authentication.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Notes</title>
-
-<para>You must change administrator password at least once after DC
-install, to create the right encoding types</para>
-
-<para>w2k doesn't seem to create the _kerberos._udp and _ldap._tcp in
- their defaults DNS setup. Maybe fixed in service packs?</para>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/AdvancedNetworkAdmin.sgml b/docs/docbook/projdoc/AdvancedNetworkAdmin.sgml
deleted file mode 100644
index dc2a78f5a6..0000000000
--- a/docs/docbook/projdoc/AdvancedNetworkAdmin.sgml
+++ /dev/null
@@ -1,291 +0,0 @@
-<chapter id="AdvancedNetworkManagement">
-<chapterinfo>
- &author.jht;
- <pubdate>April 3 2003</pubdate>
-</chapterinfo>
-
-<title>Advanced Network Manangement</title>
-
-<para>
-This section attempts to document peripheral issues that are of great importance to network
-administrators who want to improve network resource access control, to automate the user
-environment, and to make their lives a little easier.
-</para>
-
-<sect1>
-<title>Configuring Samba Share Access Controls</title>
-
-<para>
-This section deals with how to configure Samba per share access control restrictions.
-By default samba sets no restrictions on the share itself. Restrictions on the share itself
-can be set on MS Windows NT4/200x/XP shares. This can be a very effective way to limit who can
-connect to a share. In the absence of specific restrictions the default setting is to allow
-the global user <emphasis>Everyone</emphasis> Full Control (ie: Full control, Change and Read).
-</para>
-
-<para>
-At this time Samba does NOT provide a tool for configuring access control setting on the Share
-itself. Samba does have the capacity to store and act on access control settings, but the only
-way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for
-Computer Management.
-</para>
-
-<para>
-Samba stores the per share access control settings in a file called <filename>share_info.tdb</filename>.
-The location of this file on your system will depend on how samba was compiled. The default location
-for samba's tdb files is under <filename>/usr/local/samba/var</filename>. If the <filename>tdbdump</filename>
-utility has been compiled and installed on your system then you can examine the contents of this file
-by: <userinput>tdbdump share_info.tdb</userinput>.
-</para>
-
-<sect2>
-<title>Share Permissions Management</title>
-
-<para>
-The best tool for the task is platform dependant. Choose the best tool for your environmemt.
-</para>
-
-<sect3>
-<title>Windows NT4 Workstation/Server</title>
-<para>
-The tool you need to use to manage share permissions on a Samba server is the NT Server Manager.
-Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation.
-You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft - see details below.
-</para>
-
-<procedure>
-<title>Instructions</title>
-<step><para>
-Launch the NT4 Server Manager, click on the Samba server you want to administer, then from the menu
-select Computer, then click on the Shared Directories entry.
-</para></step>
-
-<step><para>
- Now click on the share that you wish to manage, then click on the Properties tab, next click on
- the Permissions tab. Now you can Add or change access control settings as you wish.
-</para></step>
-</procedure>
-
-</sect3>
-
-<sect3>
-<title>Windows 200x/XP</title>
-
-<para>
-On MS Windows NT4/200x/XP system access control lists on the share itself are set using native
-tools, usually from filemanager. For example, in Windows 200x: right click on the shared folder,
-then select 'Sharing', then click on 'Permissions'. The default Windows NT4/200x permission allows
-<emphasis>Everyone</emphasis> Full Control on the Share.
-</para>
-
-<para>
-MS Windows 200x and later all comes with a tool called the 'Computer Management' snap-in for the
-Microsoft Management Console (MMC). This tool is located by clicking on <filename>Control Panel ->
-Administrative Tools -> Computer Management</filename>.
-</para>
-
-<procedure>
-<title>Instructions</title>
-<step><para>
- After launching the MMC with the Computer Management snap-in, click on the menu item 'Action',
- select 'Connect to another computer'. If you are not logged onto a domain you will be prompted
- to enter a domain login user identifier and a password. This will authenticate you to the domain.
- If you where already logged in with administrative privilidge this step is not offered.
-</para></step>
-
-<step><para>
-If the Samba server is not shown in the Select Computer box, then type in the name of the target
-Samba server in the field 'Name:'. Now click on the [+] next to 'System Tools', then on the [+]
-next to 'Shared Folders' in the left panel.
-</para></step>
-
-<step><para>
-Now in the right panel, double-click on the share you wish to set access control permissions on.
-Then click on the tab 'Share Permissions'. It is now possible to add access control entities
-to the shared folder. Do NOT forget to set what type of access (full control, change, read) you
-wish to assign for each entry.
-</para></step>
-</procedure>
-
-<warning>
-<para>
-Be careful. If you take away all permissions from the Everyone user without removing this user
-then effectively no user will be able to access the share. This is a result of what is known as
-ACL precidence. ie: Everyone with NO ACCESS means that MaryK who is part of the group Everyone
-will have no access even if this user is given explicit full control access.
-</para>
-</warning>
-
-</sect3>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Remote Server Administration</title>
-
-<para>
-<emphasis>How do I get 'User Manager' and 'Server Manager'?</emphasis>
-</para>
-
-<para>
-Since I don't need to buy an NT4 Server, how do I get the 'User Manager for Domains',
-the 'Server Manager'?
-</para>
-
-<para>
-Microsoft distributes a version of these tools called nexus for installation on Windows 9x / Me
-systems. The tools set includes:
-</para>
-
-<itemizedlist>
- <listitem><para>Server Manager</para></listitem>
- <listitem><para>User Manager for Domains</para></listitem>
- <listitem><para>Event Viewer</para></listitem>
-</itemizedlist>
-
-<para>
-Click here to download the archived file <ulink
-url="ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE">ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE</ulink>
-</para>
-
-<para>
-The Windows NT 4.0 version of the 'User Manager for
-Domains' and 'Server Manager' are available from Microsoft via ftp
-from <ulink url="ftp://ftp.microsoft.com/Softlib/MSLFILES/SRVTOOLS.EXE">ftp://ftp.microsoft.com/Softlib/MSLFILES/SRVTOOLS.EXE</ulink>
-</para>
-
-</sect1>
-<sect1>
-<title>Network Logon Script Magic</title>
-
-<para>
-This section needs work. Volunteer contributions most welcome. Please send your patches or updates
-to <ulink url="mailto:jht@samba.org">John Terpstra</ulink>.
-</para>
-
-<para>
-There are several opportunities for creating a custom network startup configuration environment.
-</para>
-
-<simplelist>
- <member>No Logon Script</member>
- <member>Simple universal Logon Script that applies to all users</member>
- <member>Use of a conditional Logon Script that applies per user or per group attirbutes</member>
- <member>Use of Samba's Preexec and Postexec functions on access to the NETLOGON share to create
- a custom Logon Script and then execute it.</member>
- <member>User of a tool such as KixStart</member>
-</simplelist>
-
-<para>
-The Samba source code tree includes two logon script generation/execution tools. See <filename>examples</filename> directory <filename>genlogon</filename> and <filename>ntlogon</filename> subdirectories.
-</para>
-
-<para>
-The following listings are from the genlogon directory.
-</para>
-
-<para>
-This is the genlogon.pl file:
-
-<programlisting>
- #!/usr/bin/perl
- #
- # genlogon.pl
- #
- # Perl script to generate user logon scripts on the fly, when users
- # connect from a Windows client. This script should be called from smb.conf
- # with the %U, %G and %L parameters. I.e:
- #
- # root preexec = genlogon.pl %U %G %L
- #
- # The script generated will perform
- # the following:
- #
- # 1. Log the user connection to /var/log/samba/netlogon.log
- # 2. Set the PC's time to the Linux server time (which is maintained
- # daily to the National Institute of Standard's Atomic clock on the
- # internet.
- # 3. Connect the user's home drive to H: (H for Home).
- # 4. Connect common drives that everyone uses.
- # 5. Connect group-specific drives for certain user groups.
- # 6. Connect user-specific drives for certain users.
- # 7. Connect network printers.
-
- # Log client connection
- #($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
- ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
- open LOG, ">>/var/log/samba/netlogon.log";
- print LOG "$mon/$mday/$year $hour:$min:$sec - User $ARGV[0] logged into $ARGV[1]\n";
- close LOG;
-
- # Start generating logon script
- open LOGON, ">/shared/netlogon/$ARGV[0].bat";
- print LOGON "\@ECHO OFF\r\n";
-
- # Connect shares just use by Software Development group
- if ($ARGV[1] eq "SOFTDEV" || $ARGV[0] eq "softdev")
- {
- print LOGON "NET USE M: \\\\$ARGV[2]\\SOURCE\r\n";
- }
-
- # Connect shares just use by Technical Support staff
- if ($ARGV[1] eq "SUPPORT" || $ARGV[0] eq "support")
- {
- print LOGON "NET USE S: \\\\$ARGV[2]\\SUPPORT\r\n";
- }
-
- # Connect shares just used by Administration staff
- If ($ARGV[1] eq "ADMIN" || $ARGV[0] eq "admin")
- {
- print LOGON "NET USE L: \\\\$ARGV[2]\\ADMIN\r\n";
- print LOGON "NET USE K: \\\\$ARGV[2]\\MKTING\r\n";
- }
-
- # Now connect Printers. We handle just two or three users a little
- # differently, because they are the exceptions that have desktop
- # printers on LPT1: - all other user's go to the LaserJet on the
- # server.
- if ($ARGV[0] eq 'jim'
- || $ARGV[0] eq 'yvonne')
- {
- print LOGON "NET USE LPT2: \\\\$ARGV[2]\\LJET3\r\n";
- print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
- }
- else
- {
- print LOGON "NET USE LPT1: \\\\$ARGV[2]\\LJET3\r\n";
- print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
- }
-
- # All done! Close the output file.
- close LOGON;
-</programlisting>
-</para>
-
-<para>
-Those wishing to use more elaborate or capable logon processing system should check out the following sites:
-</para>
-
-<simplelist>
- <member>http://www.craigelachie.org/rhacer/ntlogon</member>
- <member>http://www.kixtart.org</member>
- <member>http://support.microsoft.com/default.asp?scid=kb;en-us;189105</member>
-</simplelist>
-
-<sect2>
-<title>Adding printers without user intervention</title>
-
-<para>
-Printers may be added automatically during logon script processing through the use of:
-
-<programlisting>
- rundll32 printui.dll,PrintUIEntry /?
-</programlisting>
-
-See the documentation in the Microsoft knowledgebase article no: 189105 referred to above.
-</para>
-</sect2>
-
-</sect1>
-</chapter>
-
diff --git a/docs/docbook/projdoc/Bugs.sgml b/docs/docbook/projdoc/Bugs.sgml
deleted file mode 100644
index e7ebde788b..0000000000
--- a/docs/docbook/projdoc/Bugs.sgml
+++ /dev/null
@@ -1,204 +0,0 @@
-<chapter id="bugreport">
-
-<chapterinfo>
- &author.jelmer;
- <author>
- <affiliation>
- <orgname>Samba Team</orgname>
- </affiliation>
- </author>
- <pubdate> 27 June 1997 </pubdate>
-</chapterinfo>
-
-<title>Reporting Bugs</title>
-
-<sect1>
-<title>Introduction</title>
-
-<para>
-The email address for bug reports for stable releases is <ulink url="mailto:samba@samba.org">samba@samba.org</ulink>.
-Bug reports for alpha releases should go to <ulink url="mailto:samba-technical@samba.org">samba-technical@samba.org</ulink>.
-</para>
-
-<para>
-Please take the time to read this file before you submit a bug
-report. Also, please see if it has changed between releases, as we
-may be changing the bug reporting mechanism at some time.
-</para>
-
-<para>
-Please also do as much as you can yourself to help track down the
-bug. Samba is maintained by a dedicated group of people who volunteer
-their time, skills and efforts. We receive far more mail about it than
-we can possibly answer, so you have a much higher chance of an answer
-and a fix if you send us a "developer friendly" bug report that lets
-us fix it fast.
-</para>
-
-<para>
-Do not assume that if you post the bug to the comp.protocols.smb
-newsgroup or the mailing list that we will read it. If you suspect that your
-problem is not a bug but a configuration problem then it is better to send
-it to the Samba mailing list, as there are (at last count) 5000 other users on
-that list that may be able to help you.
-</para>
-
-<para>
-You may also like to look though the recent mailing list archives,
-which are conveniently accessible on the Samba web pages
-at <ulink url="http://samba.org/samba/">http://samba.org/samba/</ulink>.
-</para>
-
-</sect1>
-
-<sect1>
-<title>General info</title>
-
-<para>
-Before submitting a bug report check your config for silly
-errors. Look in your log files for obvious messages that tell you that
-you've misconfigured something and run testparm to test your config
-file for correct syntax.
-</para>
-
-<para>
-Have you run through the <link linkend="diagnosis">diagnosis</link>?
-This is very important.
-</para>
-
-<para>
-If you include part of a log file with your bug report then be sure to
-annotate it with exactly what you were doing on the client at the
-time, and exactly what the results were.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Debug levels</title>
-
-<para>
-If the bug has anything to do with Samba behaving incorrectly as a
-server (like refusing to open a file) then the log files will probably
-be very useful. Depending on the problem a log level of between 3 and
-10 showing the problem may be appropriate. A higher level givesmore
-detail, but may use too much disk space.
-</para>
-
-<para>
-To set the debug level use <command>log level =</command> in your
-&smb.conf;. You may also find it useful to set the log
-level higher for just one machine and keep separate logs for each machine.
-To do this use:
-</para>
-
-<para><programlisting>
-log level = 10
-log file = /usr/local/samba/lib/log.%m
-include = /usr/local/samba/lib/smb.conf.%m
-</programlisting></para>
-
-<para>
-then create a file
-<filename>/usr/local/samba/lib/smb.conf.<replaceable>machine</replaceable></filename> where
-<replaceable>machine</replaceable> is the name of the client you wish to debug. In that file
-put any &smb.conf; commands you want, for example
-<command>log level=</command> may be useful. This also allows you to
-experiment with different security systems, protocol levels etc on just
-one machine.
-</para>
-
-<para>
-The &smb.conf; entry <command>log level =</command>
-is synonymous with the entry <command>debuglevel =</command> that has been
-used in older versions of Samba and is being retained for backwards
-compatibility of &smb.conf; files.
-</para>
-
-<para>
-As the <command>log level =</command> value is increased you will record
-a significantly increasing level of debugging information. For most
-debugging operations you may not need a setting higher than 3. Nearly
-all bugs can be tracked at a setting of 10, but be prepared for a VERY
-large volume of log data.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Internal errors</title>
-
-<para>
-If you get a "INTERNAL ERROR" message in your log files it means that
-Samba got an unexpected signal while running. It is probably a
-segmentation fault and almost certainly means a bug in Samba (unless
-you have faulty hardware or system software).
-</para>
-
-<para>
-If the message came from smbd then it will probably be accompanied by
-a message which details the last SMB message received by smbd. This
-info is often very useful in tracking down the problem so please
-include it in your bug report.
-</para>
-
-<para>
-You should also detail how to reproduce the problem, if
-possible. Please make this reasonably detailed.
-</para>
-
-<para>
-You may also find that a core file appeared in a <filename>corefiles</filename>
-subdirectory of the directory where you keep your samba log
-files. This file is the most useful tool for tracking down the bug. To
-use it you do this:
-</para>
-
-<para><command>gdb smbd core</command></para>
-
-<para>
-adding appropriate paths to smbd and core so gdb can find them. If you
-don't have gdb then try <userinput>dbx</userinput>. Then within the debugger use the
-command <userinput>where</userinput> to give a stack trace of where the problem
-occurred. Include this in your mail.
-</para>
-
-<para>
-If you know any assembly language then do a <userinput>disass</userinput> of the routine
-where the problem occurred (if its in a library routine then
-disassemble the routine that called it) and try to work out exactly
-where the problem is by looking at the surrounding code. Even if you
-don't know assembly then incuding this info in the bug report can be
-useful.
-</para>
-</sect1>
-
-<sect1>
-<title>Attaching to a running process</title>
-
-<para>
-Unfortunately some unixes (in particular some recent linux kernels)
-refuse to dump a core file if the task has changed uid (which smbd
-does often). To debug with this sort of system you could try to attach
-to the running process using <userinput>gdb smbd <replaceable>PID</replaceable></userinput> where you get <replaceable>PID</replaceable> from
-<application>smbstatus</application>. Then use <userinput>c</userinput> to continue and try to cause the core dump
-using the client. The debugger should catch the fault and tell you
-where it occurred.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Patches</title>
-
-<para>
-The best sort of bug report is one that includes a fix! If you send us
-patches please use <userinput>diff -u</userinput> format if your version of
-diff supports it, otherwise use <userinput>diff -c4</userinput>. Make sure
-you do the diff against a clean version of the source and let me know
-exactly what version you used.
-</para>
-
-</sect1>
-</chapter>
-
diff --git a/docs/docbook/projdoc/CUPS-printing.sgml b/docs/docbook/projdoc/CUPS-printing.sgml
deleted file mode 100644
index 57faebdcd6..0000000000
--- a/docs/docbook/projdoc/CUPS-printing.sgml
+++ /dev/null
@@ -1,1794 +0,0 @@
-<chapter id="CUPS-printing">
-
-
-<chapterinfo>
- &author.jht;
- <author>
- <firstname>Kurt</firstname><surname>Pfeifle</surname>
- <affiliation>
- <address><email>kpfeifle@danka.de</email></address>
- </affiliation>
- </author>
- <pubdate> (25 March 2003) </pubdate>
-</chapterinfo>
-
-<title>CUPS Printing Support</title>
-
-<sect1>
-<title>Introduction</title>
-
-<para>
-The Common Unix Print System (CUPS) has become very popular, but to many it is
-a very mystical tool. There is a great deal of uncertainty regarding CUPS and how
-it works. The result is seen in a large number of posting on the samba mailing lists
-expressing frustration when MS Windows printers appear not to work with a CUPS
-backr-end.
-</para>
-
-<para>
-This is a good time to point out how CUPS can be used and what it does. CUPS is more
-than just a print spooling system - it is a complete printer management system that
-complies with HTTP and IPP protocols. It can be managed remotely via a web browser
-and it can print using http and ipp protocols.
-</para>
-
-<para>
-CUPS allows to creation of RAW printers (ie: NO file format translation) as well as
-SMART printers (ie: CUPS does file format conversion as required for the printer). In
-many ways this gives CUPS similar capabilities to the MS Windows print monitoring
-system. Of course, if you are a CUPS advocate, you would agrue that CUPS is better!
-In any case, let us now move on to explore how one may configure CUPS for interfacing
-with MS Windows print clients via Samba.
-</para>
-
-<para>
-<ulink url="http://www.cups.org/">CUPS</ulink> is a newcomer in the UNIX printing scene,
-which has convinced many people upon first trial already. However, it has quite a few
-new features, which make it different from other, more traditional printing systems.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Configuring &smb.conf; for CUPS</title>
-
-<para>
-Printing with CUPS in the most basic &smb.conf;
-setup in Samba-3 only needs two settings: <command>printing = cups</command> and
-<command>printcap = cups</command>. While CUPS itself doesn't need a printcap
-anymore, the <filename>cupsd.conf</filename> configuration file knows two directives
-(example: <command>Printcap /etc/printcap</command> and <command>PrintcapFormat
-BSD</command>), which control if such a file should be created for the
-convenience of third party applications. Make sure it is set! For details see
-<command>man cupsd.conf</command> and other CUPS-related documentation.
-</para>
-
-<para>
-If SAMBA is compiled against libcups, then <command>printcap = cups</command> uses the
-CUPS API to list printers, submit jobs, etc. Otherwise it maps to the System V commands
-with an additional <parameter>-oraw</parameter> option for printing. On a Linux system,
-you can use the <command>ldd</command> command to find out details (ldd may not be
-present on other OS platforms, or its function may be embodied by a different command):
-</para>
-
-<para>
-<programlisting>transmeta:/home/kurt # ldd `which smbd`
- libssl.so.0.9.6 => /usr/lib/libssl.so.0.9.6 (0x4002d000)
- libcrypto.so.0.9.6 => /usr/lib/libcrypto.so.0.9.6 (0x4005a000)
- libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000)
- libdl.so.2 => /lib/libdl.so.2 (0x401e8000)
- libnsl.so.1 => /lib/libnsl.so.1 (0x401ec000)
- libpam.so.0 => /lib/libpam.so.0 (0x40202000)
- libc.so.6 => /lib/libc.so.6 (0x4020b000)
- /lib/ld-linux.so.2 =&gt; /lib/ld-linux.so.2 (0x40000000)
-</programlisting></para>
-
-<para>
-The line "libcups.so.2 =&gt; /usr/lib/libcups.so.2
-(0x40123000)" shows there is CUPS support compiled into this version of
-Samba. If this is the case, and <command>printing = cups</command> is set, then any
-otherwise manually set print command in &smb.conf; is ignored.
-</para>
-</sect1>
-
-<sect1>
-<title>CUPS - RAW Print Through Mode</title>
-
-<note>
-<para>
-When used in raw print through mode is will be necessary to use the printer
-vendor's drivers in each Windows client PC.
-</para>
-</note>
-
-<para>
-When CUPS printers are configured for RAW print-through mode operation it is the
-responsibility of the Samba client to fully render the print job (file) in a format
-that is suitable for direct delivery to the printer. In this case CUPS will NOT
-do any print file format conversion work.
-</para>
-
-<para>
-The CUPS files that need to be correctly set for RAW mode printers to work are:
-
-<itemizedlist>
- <listitem><para><filename>/etc/cups/mime.types</filename></para></listitem>
- <listitem><para><filename>/etc/cups/mime.convs</filename></para></listitem>
-</itemizedlist>
-
-Both contain entries that must be uncommented to allow <emphasis>RAW</emphasis> mode
-operation.
-</para>
-
-<para>
-Firstly, to enable CUPS based printing from Samba the following options must be
-enabled in your &smb.conf; file [globals] section:
-
-<itemizedlist>
- <listitem><para>printing = CUPS</para></listitem>
-
- <listitem><para>printcap = CUPS</para></listitem>
-</itemizedlist>
-
-When these parameters are specified the print directives in &smb.conf; (as well as in
-samba itself) will be ignored because samba will directly interface with CUPS through
-it's application program interface (API) - so long as Samba has been compiled with
-CUPS library (libcups) support. If samba has NOT been compiled with CUPS support then
-printing will use the System V AT&amp;T command set with the <emphasis>-oraw</emphasis>
-option automatically passing through.
-</para>
-
-<para>
-Cupsomatic (an enhanced printing utility that is part of some CUPS implementations)
-on the Samba/CUPS server does *not* add any features if a file is really
-printed "raw". However, if you have loaded the driver for the Windows client from
-the CUPS server, using the "cupsaddsmb" utility, and if this driver is one using
-a "Foomatic" PPD, the PJL header in question is already added on the Windows client,
-at the time when the driver initially generated the PostScript data and CUPS in true
-"-oraw" manner doesn't remove this PJL header and passes the file "as is" to its
-printer communication backend.
-</para>
-
-<note><para>NOTE: editing in the "mime.convs" and the "mime.types" file does not *enforce*
-"raw" printing, it only *allows* it.</para></note>
-
-<para>
-Print files that arrive from MS Windows printing are "auto-typed" by CUPS. This aids
-the process of determining proper treatment while in the print queue system.
-
-<itemizedlist>
- <listitem><para>
- Files generated by PCL drivers and directed at PCK printers get auto-typed as
- <filename>application/octet-stream</filename>. Unknown file format types also
- get auto-typed with this tag.
- </para></listitem>
-
- <listitem><para>
- Files generated by a Postscript driver and directed at a Postscript printer
- are auto-typed depending on the auto-detected most suitable MIME type as:
-
- <itemizedlist>
- <listitem><para>* application/postscript</para></listitem>
- <listitem><para>* application/vnd.cups-postscript</para></listitem>
- </itemizedlist>
- </para>
- </listitem>
-</itemizedlist>
-</para>
-
-
-<para>
-"application/postscript" first goes thru the "pstops" filter (where the page counting
-and accounting takes place). The outcome will be of MIME type
-"application/vnd.cups-postscript". The pstopsfilter reads and uses information from
-the PPD and inserts user-provided options into the PostScript file. As a consequence,
-the filtered file could possibly have an unwanted PJL header.
-</para>
-
-<para>
-"application/postscript" will be all files with a ".ps", ".ai", ".eps" suffix or which
-have as their first character string one of "%!" or "&gt;04&lt;%".
-</para>
-
-<para>
-"application/vnd.cups-postscript" will files which contain the string
-"LANGUAGE=POSTSCRIPT" (or similar variations with different capitalization) in the
-first 512 bytes, and also contain the "PJL super escape code" in the first 128 bytes
-("&gt;1B&lt;%-12345X"). Very likely, most PostScript files generated on Windows using a CUPS
-or other PPD, will have to be auto-typed as "vnd.cups-postscript". A file produced
-with a "Generic PostScript driver" will just be tagged "application/postscript".
-</para>
-
-<para>
-Once the file is in "application/vnd.cups-postscript" format, either "pstoraster"
-or "cupsomatic" will take over (depending on the printer configuration, as
-determined by the PPD in use).
-</para>
-
-<note><para>
-A printer queue with *no* PPD associated to it is a "raw" printer and all files
-will go directly there as received by the spooler. The exeptions are file types
-"application/octet-stream" which need "passthrough feature" enabled.
-"Raw" queues don't do any filtering at all, they hand the file directly to the
-CUPS backend. This backend is responsible for the sending of the data to the device
-(as in the "device URI" notation as lpd://, socket://, smb://, ipp://, http://,
-parallel:/, serial:/, usb:/ etc.)
-</para></note>
-
-<note><para>
-"cupsomatic"/Foomatic are *not* native CUPS drivers and they don't ship with CUPS.
-They are a Third Party add-on, developed at Linuxprinting.org. As such, they are
-a brilliant hack to make all models (driven by Ghostscript drivers/filters in
-traditional spoolers) also work via CUPS, with the same (good or bad!) quality
-as in these other spoolers. "cupsomatic" is only a vehicle to execute a ghostscript
-commandline at that stage in the CUPS filtering chain, where "normally" the native
-CUPS "pstoraster" filter would kick in. cupsomatic by-passes pstoraster, "kidnaps"
-the printfile from CUPS away and re-directs it to go through Ghostscipt. CUPS accepts this,
-because the associated CUPS-O-Matic-/Foomatic-PPD specifies:
-</para>
-
-<programlisting>
- *cupsFilter: "application/vnd.cups-postscript 0 cupsomatic"
-</programlisting>
-
-<para>
-This line persuades CUPS to hand the file to cupsomatic, once it has successfully
-converted it to the MIME type "application/vnd.cups-postscript". This conversion will not
-happen for Jobs arriving from Windows which are auto-typed "application/octet-stream",
-with the according changes in "/etc/cups/mime.types" in place.
-</para></note>
-
-<para>
-CUPS is widely configurable and flexible, even regarding its filtering mechanism.
-Another workaround in some situations would be to have
-in "/etc/cups/mime.types" entries as follows:
-</para>
-
-<programlisting>
- application/postscript application/vnd.cups-raw 0 -
- application/vnd.cups-postscript application/vnd.cups-raw 0 -
-</programlisting>
-
-<para>
-This would prevent all Postscript files from being filtered (rather, they will go
-thru the virtual "nullfilter" denoted with "-"). This could only be useful for
-PS printers. If you want to print PS code on non-PS printers an entry as follows
-could be useful:
-</para>
-
-<programlisting>
- */* application/vnd.cups-raw 0 -
-</programlisting>
-
-<para>
-and would effectively send *all* files to the backend without further processing.
-</para>
-
-<para>
-Lastly, you could have the following entry:
-</para>
-
-<programlisting>
- application/vnd.cups-postscript application/vnd.cups-raw 0 my_PJL_stripping_filter
-</programlisting>
-
-<para>
-You will need to write a "my_PJL_stripping_filter" (could be a shellscript) that
-parses the PostScript and removes the unwanted PJL. This would need to conform to
-CUPS filter design (mainly, receive and pass the parameters printername, job-id,
-username, jobtitle, copies, print options and possibly the filename). It would
-be installed as world executable into "/usr/lib/cups/filters/" and will be called
-by CUPS if it encounters a MIME type "application/vnd.cups-postscript".
-</para>
-
-<para>
-CUPS can handle "-o job-hold-until=indefinite". This keeps the job in the queue
-"on hold". It will only be printed upon manual release by the printer operator.
-This is a requirement in many "central reproduction departments", where a few
-operators manage the jobs of hundreds of users on some big machine, where no
-user is allowed to have direct access. (The operators often need to load the
-proper paper type before running the 10.000 page job requested by marketing
-for the mailing, etc.).
-</para>
-
-</sect1>
-
-<sect1>
-<title>CUPS as a network PostScript RIP</title>
-
-<para>
-This is the configuration where CUPS drivers are working on server, and where the
-Adobe PostScript driver with CUPS-PPDs is downloaded to clients.
-</para>
-
-<para>
-CUPS is perfectly able to use PPD files (PostScript
-Printer Descriptions). PPDs can control all print device options. They
-are usually provided by the manufacturer -- if you own a PostSript printer,
-that is. PPD files are always a component of PostScript printer drivers on MS
-Windows or Apple Mac OS systems. They are ASCII files containing
-user-selectable print options, mapped to appropriate PostScript, PCL or PJL
-commands for the target printer. Printer driver GUI dialogs translate these
-options "on-the-fly" into buttons and drop-down lists for the user to
-select.
-</para>
-
-<para>
-CUPS can load, without any conversions, the PPD file from
-any Windows (NT is recommended) PostScript driver and handle the options.
-There is a web browser interface to the print options (select
-http://localhost:631/printers/ and click on one "Configure Printer" button
-to see it), a commandline interface (see <command>man lpoptions</command> or
-try if you have <command>lphelp</command> on your system) plus some different GUI frontends on Linux
-UNIX, which can present PPD options to the users. PPD options are normally
-meant to become evaluated by the PostScript RIP on the real PostScript
-printer.
-</para>
-
-<para>
-CUPS doesn't stop at "real" PostScript printers in its
-usage of PPDs. The CUPS developers have extended the PPD concept, to also
-describe available device and driver options for non-PostScript printers
-through CUPS-PPDs.
-</para>
-
-<para>
-This is logical, as CUPS includes a fully featured
-PostScript interpreter (RIP). This RIP is based on Ghostscript. It can
-process all received PostScript (and additionally many other file formats)
-from clients. All CUPS-PPDs geared to non-PostScript printers contain an
-additional line, starting with the keyword <parameter>*cupsFilter</parameter>.
-This line
-tells the CUPS print system which printer-specific filter to use for the
-interpretation of the accompanying PostScript. Thus CUPS lets all its
-printers appear as PostScript devices to its clients, because it can act as a
-PostScript RIP for those printers, processing the received PostScript code
-into a proper raster print format.
-</para>
-
-<para>
-CUPS-PPDs can also be used on Windows-Clients, on top of a
-PostScript driver (recommended is the Adobe one).
-</para>
-
-<para>
-This feature enables CUPS to do a few tricks no other
-spooler can do:
-</para>
-
-<itemizedlist>
- <listitem><para>act as a networked PostScript RIP (Raster Image Processor), handling
- printfiles from all client platforms in a uniform way;</para></listitem>
- <listitem><para>act as a central accounting and billing server, as all files are passed
- through the <command>pstops</command> Filter and are therefor logged in
- the CUPS <filename>page&lowbar;log</filename>. - <emphasis>NOTE: </emphasis>this
- can not happen with "raw" print jobs, which always remain unfiltered
- per definition;</para></listitem>
- <listitem><para>enable clients to consolidate on a single PostScript driver, even for
- many different target printers.</para></listitem>
-</itemizedlist>
-</sect1>
-
-<sect1>
-<title>Windows Terminal Servers (WTS) as CUPS clients</title>
-
-<para>
-This setup may be of special interest to people
-experiencing major problems in WTS environments. WTS need often a multitude
-of non-PostScript drivers installed to run their clients' variety of
-different printer models. This often imposes the price of much increased
-instability. In many cases, in an attempt to overcome this problem, site
-administrators have resorted to restrict the allowed drivers installed on
-their WTS to one generic PCL- and one PostScript driver. This however
-restricts the clients in the amount of printer options available for them --
-often they can't get out more then simplex prints from one standard paper
-tray, while their devices could do much better, if driven by a different
-driver!
-</para>
-
-<para>
-Using an Adobe PostScript driver, enabled with a CUPS-PPD,
-seems to be a very elegant way to overcome all these shortcomings. The
-PostScript driver is not known to cause major stability problems on WTS (even
-if used with many different PPDs). The clients will be able to (again) chose
-paper trays, duplex printing and other settings. However, there is a certain
-price for this too: a CUPS server acting as a PostScript RIP for its clients
-requires more CPU and RAM than just to act as a "raw spooling" device. Plus,
-this setup is not yet widely tested, although the first feedbacks look very
-promising...
-</para>
-</sect1>
-
-
-<sect1>
-<title>Setting up CUPS for driver download</title>
-
-<para>
-The <command>cupsadsmb</command> utility (shipped with all current
-CUPS versions) makes the sharing of any (or all) installed CUPS printers very
-easy. Prior to using it, you need the following settings in &smb.conf;:
-</para>
-
- <para><programlisting>[global]
- load printers = yes
- printing = cups
- printcap name = cups
-
- [printers]
- comment = All Printers
- path = /var/spool/samba
- browseable = no
- public = yes
- guest ok = yes
- writable = no
- printable = yes
- printer admin = root
-
- [print$]
- comment = Printer Drivers
- path = /etc/samba/drivers
- browseable = yes
- guest ok = no
- read only = yes
- write list = root
- </programlisting></para>
-
-<para>
-For licensing reasons the necessary files of the Adobe
-Postscript driver can not be distributed with either Samba or CUPS. You need
-to download them yourself from the Adobe website. Once extracted, create a
-<filename>drivers</filename> directory in the CUPS data directory (usually
-<filename>/usr/share/cups/</filename>). Copy the Adobe files using
-UPPERCASE filenames, to this directory as follows:
-</para>
-
- <para><programlisting>
- ADFONTS.MFM
- ADOBEPS4.DRV
- ADOBEPS4.HLP
- ADOBEPS5.DLL
- ADOBEPSU.DLL
- ADOBEPSU.HLP
- DEFPRTR2.PPD
- ICONLIB.DLL
- </programlisting></para>
-
-<para>
-Users of the ESP Print Pro software are able to install
-their "Samba Drivers" package for this purpose with no problem.
-</para>
-</sect1>
-
-
-
-<sect1>
-<title>Sources of CUPS drivers / PPDs</title>
-
-<para>
-On the internet you can find now many thousand CUPS-PPD
-files (with their companion filters), in many national languages,
-supporting more than 1.000 non-PostScript models.
-</para>
-
-<itemizedlist>
- <listitem><para><ulink url="http://wwwl.easysw.com/printpro/">ESP PrintPro
- (http://wwwl.easysw.com/printpro/)</ulink>
- (commercial, non-Free) is packaged with more than 3.000 PPDs, ready for
- successful usage "out of the box" on Linux, IBM-AIX, HP-UX, Sun-Solaris,
- SGI-IRIX, Compaq Tru64, Digital Unix and some more commercial Unices (it
- is written by the CUPS developers themselves and its sales help finance
- the further development of CUPS, as they feed their creators)</para></listitem>
- <listitem><para>the <ulink
- url="http://gimp-print.sourceforge.net/">Gimp-Print-Project
- (http://gimp-print.sourceforge.net/)</ulink>
- (GPL, Free Software) provides around 120 PPDs (supporting nearly 300
- printers, many driven to photo quality output), to be used alongside the
- Gimp-Print CUPS filters;</para></listitem>
- <listitem><para><ulink url="http://www.turboprint.com/">TurboPrint
- (http://www.turboprint.com/)</ulink>
- (Shareware, non-Freee) supports roughly the same amount of printers in
- excellent quality;</para></listitem>
- <listitem><para><ulink
- url="http://www-124.ibm.com/developerworks/oss/linux/projects/omni/">OMNI
- (http://www-124.ibm.com/developerworks/oss/linux/projects/omni/)</ulink>
- (LPGL, Free) is a package made by IBM, now containing support for more
- than 400 printers, stemming from the inheritance of IBM OS/2 KnowHow
- ported over to Linux (CUPS support is in a Beta-stage at present);</para></listitem>
- <listitem><para><ulink url="http://hpinkjet.sourceforge.net/">HPIJS
- (http://hpinkjet.sourceforge.net/)</ulink>
- (BSD-style licnes, Free) supports around 120 of HP's own printers and is
- also providing excellent print quality now;</para></listitem>
- <listitem><para><ulink
- url="http://www.linuxprinting.org/">Foomatic/cupsomatic (http://www.linuxprinting.org/)</ulink>
- (LPGL, Free) from Linuxprinting.org are providing PPDs for practically every
- Ghostscript filter known to the world, now usable with CUPS.</para></listitem>
-</itemizedlist>
-
-<para>
-<emphasis>NOTE: </emphasis>the cupsomatic trick from Linuxprinting.org is
-working different from the other drivers. While the other drivers take the
-generic CUPS raster (produced by CUPS' own pstoraster PostScript RIP) as
-their input, cupsomatic "kidnaps" the PostScript inside CUPS, before
-RIP-ping, deviates it to an external Ghostscript installation (which now
-becomes the RIP) and gives it back to a CUPS backend once Ghostscript is
-finished. -- CUPS versions from 1.1.15 and later will provide their pstoraster
-PostScript RIP function again inside a system-wide Ghostscript
-installation rather than in "their own" pstoraster filter. (This
-CUPS-enabling Ghostscript version may be installed either as a
-patch to GNU or AFPL Ghostscript, or as a complete ESP Ghostscript package).
-However, this will not change the cupsomatic approach of guiding the printjob
-along a different path through the filtering system than the standard CUPS
-way...
-</para>
-
-<para>
-Once you installed a printer inside CUPS with one of the
-recommended methods (the lpadmin command, the web browser interface or one of
-the available GUI wizards), you can use <command>cupsaddsmb</command> to share the
-printer via Samba. <command>cupsaddsmb</command> prepares the driver files for
-comfortable client download and installation upon their first contact with
-this printer share.
-</para>
-
-
-
-<sect2>
-<title><command>cupsaddsmb</command></title>
-
-
-<para>
-The <command>cupsaddsmb</command> command copies the needed files
-for convenient Windows client installations from the previously prepared CUPS
-data directory to your [print$] share. Additionally, the PPD
-associated with this printer is copied from <filename>/etc/cups/ppd/</filename> to
-[print$].
-</para>
-
-<para><programlisting>
-<prompt>root# </prompt> <command>cupsaddsmb -U root infotec_IS2027</command>
-Password for root required to access localhost via
-SAMBA: <userinput>[type in password 'secret']</userinput>
-</programlisting></para>
-
-<para>
-To share all printers and drivers, use the <parameter>-a</parameter>
-parameter instead of a printer name.
-</para>
-
-
-<para>
-Probably you want to see what's going on. Use the
-<parameter>-v</parameter> parameter to get a more verbose output:
-</para>
-
-<para>
-Probably you want to see what's going on. Use the
-<parameter>-v</parameter> parameter to get a more verbose output:
-</para>
-
-<para><programlisting>
-Note: The following line shave been wrapped so that information is not lost.
-
-<prompt>root# </prompt> cupsaddsmb -v -U root infotec_IS2027
- Password for root required to access localhost via SAMBA:
- Running command: smbclient //localhost/print\$ -N -U'root%secret' -c 'mkdir W32X86;put
- /var/spool/cups/tmp/3cd1cc66376c0 W32X86/infotec_IS2027.PPD;put
- /usr/share/cups/drivers/
- ADOBEPS5.DLL W32X86/ADOBEPS5.DLL;put /usr/share/cups/drivers/ADOBEPSU.DLLr
- W32X86/ADOBEPSU.DLL;put /usr/share/cups/drivers/ADOBEPSU.HLP W32X86/ADOBEPSU.HLP'
- added interface ip=10.160.16.45 bcast=10.160.31.255 nmask=255.255.240.0
- added interface ip=192.168.182.1 bcast=192.168.182.255 nmask=255.255.255.0
- added interface ip=172.16.200.1 bcast=172.16.200.255 nmask=255.255.255.0
- Domain=[TUX-NET] OS=[Unix] Server=[Samba 2.2.3a.200204262025cvs]
- NT_STATUS_OBJECT_NAME_COLLISION making remote directory \W32X86
- putting file /var/spool/cups/tmp/3cd1cc66376c0 as
- \W32X86/infotec_IS2027.PPD (17394.6 kb/s) (average 17395.2 kb/s)
- putting file /usr/share/cups/drivers/ADOBEPS5.DLL as
- \W32X86/ADOBEPS5.DLL (10877.4 kb/s) (average 11343.0 kb/s)
- putting file /usr/share/cups/drivers/ADOBEPSU.DLL as
- \W32X86/ADOBEPSU.DLL (5095.2 kb/s) (average 9260.4 kb/s)
- putting file /usr/share/cups/drivers/ADOBEPSU.HLP as
- \W32X86/ADOBEPSU.HLP (8828.7 kb/s) (average 9247.1 kb/s)
-
- Running command: smbclient //localhost/print\$ -N -U'root%secret' -c 'mkdir WIN40;put
- /var/spool/cups/tmp/3cd1cc66376c0 WIN40/infotec_IS2027.PPD;put
- /usr/share/cups/drivers/ADFONTS.MFM WIN40/ADFONTS.MFM;put
- /usr/share/cups/drivers/ADOBEPS4.DRV WIN40/ADOBEPS4.DRV;put
- /usr/share/cups/drivers/ADOBEPS4.HLP WIN40/ADOBEPS4.HLP;put
- /usr/share/cups/drivers/DEFPRTR2.PPD WIN40/DEFPRTR2.PPD;put
- /usr/share/cups/drivers/ICONLIB.DLL WIN40/ICONLIB.DLL;put
- /usr/share/cups/drivers/PSMON.DLL WIN40/PSMON.DLL;'
- added interface ip=10.160.16.45 bcast=10.160.31.255 nmask=255.255.240.0
- added interface ip=192.168.182.1 bcast=192.168.182.255 nmask=255.255.255.0
- added interface ip=172.16.200.1 bcast=172.16.200.255 nmask=255.255.255.0
- Domain=[TUX-NET] OS=[Unix] Server=[Samba 2.2.3a.200204262025cvs]
- NT_STATUS_OBJECT_NAME_COLLISION making remote directory \WIN40
- putting file /var/spool/cups/tmp/3cd1cc66376c0 as
- \WIN40/infotec_IS2027.PPD (26091.5 kb/s) (average 26092.8 kb/s)
- putting file /usr/share/cups/drivers/ADFONTS.MFM as
- \WIN40/ADFONTS.MFM (11241.6 kb/s) (average 11812.9 kb/s)
- putting file /usr/share/cups/drivers/ADOBEPS4.DRV as
- \WIN40/ADOBEPS4.DRV (16640.6 kb/s) (average 14679.3 kb/s)
- putting file /usr/share/cups/drivers/ADOBEPS4.HLP as
- \WIN40/ADOBEPS4.HLP (11285.6 kb/s) (average 14281.5 kb/s)
- putting file /usr/share/cups/drivers/DEFPRTR2.PPD as
- \WIN40/DEFPRTR2.PPD (823.5 kb/s) (average 12944.0 kb/s)
- putting file /usr/share/cups/drivers/ICONLIB.DLL as
- \WIN40/ICONLIB.DLL (19226.2 kb/s) (average 13169.7 kb/s)
- putting file /usr/share/cups/drivers/PSMON.DLL as
- \WIN40/PSMON.DLL (18666.1 kb/s) (average 13266.7 kb/s)
-
- Running command: rpcclient localhost -N -U'root%secret'
- -c 'adddriver "Windows NT x86"
- "infotec_IS2027:ADOBEPS5.DLL:infotec_IS2027.PPD:ADOBEPSU.DLL:
- ADOBEPSU.HLP:NULL:RAW:NULL"'
- cmd = adddriver "Windows NT x86"
- "infotec_IS2027:ADOBEPS5.DLL:infotec_IS2027.PPD:ADOBEPSU.DLL:
- ADOBEPSU.HLP:NULL:RAW:NULL"
- Printer Driver infotec_IS2027 successfully installed.
-
- Running command: rpcclient localhost -N -U'root%secret'
- -c 'adddriver "Windows 4.0"
- "infotec_IS2027:ADOBEPS4.DRV:infotec_IS2027.PPD:NULL:
- ADOBEPS4.HLP:PSMON.DLL:RAW: ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'
- cmd = adddriver "Windows 4.0" "infotec_IS2027:ADOBEPS4.DRV:
- infotec_IS2027.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:
- ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"
- Printer Driver infotec_IS2027 successfully installed.
-
- Running command: rpcclient localhost -N -U'root%secret'
- -c 'setdriver infotec_IS2027 infotec_IS2027'
- cmd = setdriver infotec_IS2027 infotec_IS2027
- Succesfully set infotec_IS2027 to driver infotec_IS2027.
-
- <prompt>root# </prompt>
-</programlisting></para>
-
-<para>
-If you look closely, you'll discover your root password was transfered unencrypted over
-the wire, so beware! Also, if you look further her, you'll discover error messages like
-<constant>NT_STATUS_OBJECT_NAME_COLLISION</constant> in between. They occur, because
-the directories <filename>WIN40</filename> and <filename>W32X86</filename> already
-existed in the [print$] driver download share (from a previous driver
-installation). They are harmless here.
-</para>
-
-<para>
-Now your printer is prepared for the clients to use. From
-a client, browse to the CUPS/Samba server, open the "Printers"
-share, right-click on this printer and select "Install..." or
-"Connect..." (depending on the Windows version you use). Now their
-should be a new printer in your client's local "Printers" folder,
-named (in my case) "infotec_IS2027 on kdebitshop"
-</para>
-
-<para>
-<emphasis>NOTE: </emphasis>
-<command>cupsaddsmb</command> will only reliably work i
-with CUPS version 1.1.15 or higher
-and Samba from 2.2.4. If it doesn't work, or if the automatic printer
-driver download to the clients doesn't succeed, you can still manually
-install the CUPS printer PPD on top of the Adobe PostScript driver on
-clients and then point the client's printer queue to the Samba printer
-share for connection, should you desire to use the CUPS networked
-PostScript RIP functions.
-</para>
-</sect2>
-</sect1>
-
-
-<sect1>
-<title>The CUPS Filter Chains</title>
-
-<para>
-The following diagrams reveal how CUPS handles print jobs.
-</para>
-
-<programlisting>
-#########################################################################
-#
-# CUPS in and of itself has this (general) filter chain (CAPITAL
-# letters are FILE-FORMATS or MIME types, other are filters (this is
-# true for pre-1.1.15 of pre-4.3 versions of CUPS and ESP PrintPro):
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT
-# |
-# |
-# V
-# pstoraster # as shipped with CUPS, independent from any Ghostscipt
-# | # installation on the system
-# | (= "postscipt interpreter")
-# |
-# V
-# APPLICATION/VND.CUPS-RASTER
-# |
-# |
-# V
-# rasterto<replaceable>something</replaceable> (f.e. Gimp-Print filters may be plugged in here)
-# | (= "raster driver")
-# |
-# V
-# SOMETHING-DEVICE-SPECIFIC
-# |
-# |
-# V
-# backend
-#
-#
-# ESP PrintPro has some enhanced "rasterto<replaceable>something</replaceable>" filters as compared to
-# CUPS, and also a somewhat improved "pstoraster" filter.
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-#########################################################################
-</programlisting>
-
-<programlisting>
-#########################################################################
-#
-# This is how "cupsomatic" comes into play:
-# =========================================
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT ----------------+
-# | |
-# | V
-# V cupsomatic
-# pstoraster (constructs complicated
-# | (= "postscipt interpreter") Ghostscript commandline
-# | to let the file be
-# V processed by a
-# APPLICATION/VND.CUPS-RASTER "-sDEVICE=<replaceable>s.th.</replaceable>"
-# | call...)
-# | |
-# V |
-# rasterto<replaceable>something</replaceable> V
-# | (= "raster driver") +-------------------------+
-# | | Ghostscript at work.... |
-# V | |
-# SOMETHING-DEVICE-SPECIFIC *-------------------------+
-# | |
-# | |
-# V |
-# backend &gt;------------------------------------+
-# |
-# |
-# V
-# THE PRINTER
-#
-#
-# Note, that cupsomatic "kidnaps" the printfile after the
-# "APPLICATION/VND.CUPS-POSTSCRPT" stage and deviates it through
-# the CUPS-external, systemwide Ghostscript installation, bypassing the
-# "pstoraster" filter (therefor also bypassing the CUPS-raster-drivers
-# "rasterto<replaceable>something</replaceable>", and hands the rasterized file directly to the CUPS
-# backend...
-#
-# cupsomatic is not made by the CUPS developers. It is an independent
-# contribution to printing development, made by people from
-# Linuxprinting.org. (see also http://www.cups.org/cups-help.html)
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-#########################################################################
-</programlisting>
-
-<programlisting>
-#########################################################################
-#
-# And this is how it works for ESP PrintPro from 4.3:
-# ===================================================
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT
-# |
-# |
-# V
-# gsrip
-# | (= "postscipt interpreter")
-# |
-# V
-# APPLICATION/VND.CUPS-RASTER
-# |
-# |
-# V
-# rasterto<replaceable>something</replaceable> (f.e. Gimp-Print filters may be plugged in here)
-# | (= "raster driver")
-# |
-# V
-# SOMETHING-DEVICE-SPECIFIC
-# |
-# |
-# V
-# backend
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-#########################################################################
-</programlisting>
-
-<programlisting>
-#########################################################################
-#
-# This is how "cupsomatic" would come into play with ESP PrintPro:
-# ================================================================
-#
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT ----------------+
-# | |
-# | V
-# V cupsomatic
-# gsrip (constructs complicated
-# | (= "postscipt interpreter") Ghostscript commandline
-# | to let the file be
-# V processed by a
-# APPLICATION/VND.CUPS-RASTER "-sDEVICE=<replaceable>s.th.</replaceable>"
-# | call...)
-# | |
-# V |
-# rasterto<replaceable>something</replaceable> V
-# | (= "raster driver") +-------------------------+
-# | | Ghostscript at work.... |
-# V | |
-# SOMETHING-DEVICE-SPECIFIC *-------------------------+
-# | |
-# | |
-# V |
-# backend &gt;------------------------------------+
-# |
-# |
-# V
-# THE PRINTER
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-#########################################################################
-</programlisting>
-
-<programlisting>
-#########################################################################
-#
-# And this is how it works for CUPS from 1.1.15:
-# ==============================================
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT-----+
-# |
-# +------------------v------------------------------+
-# | Ghostscript |
-# | at work... |
-# | (with |
-# | "-sDEVICE=cups") |
-# | |
-# | (= "postscipt interpreter") |
-# | |
-# +------------------v------------------------------+
-# |
-# |
-# APPLICATION/VND.CUPS-RASTER &gt;-------+
-# |
-# |
-# V
-# rasterto<replaceable>something</replaceable>
-# | (= "raster driver")
-# |
-# V
-# SOMETHING-DEVICE-SPECIFIC
-# |
-# |
-# V
-# backend
-#
-#
-# NOTE: since version 1.1.15 CUPS "outsourced" the pstoraster process to
-# Ghostscript. GNU Ghostscript needs to be patched to handle the
-# CUPS requirement; ESP Ghostscript has this builtin. In any case,
-# "gs -h" needs to show up a "cups" device. pstoraster is now a
-# calling an appropriate "gs -sDEVICE=cups..." commandline to do
-# the job. It will output "application/vnd.cup-raster", which will
-# be finally processed by a CUPS raster driver "rasterto<replaceable>something</replaceable>"
-# Note the difference to "cupsomatic", which will *not* output
-# CUPS-raster, but a final version of the printfile, ready to be
-# sent to the printer. cupsomatic also doesn't use the "cups"
-# devicemode in Ghostscript, but one of the classical devicemodes....
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-#########################################################################
-</programlisting>
-
-<programlisting>
-#########################################################################
-#
-# And this is how it works for CUPS from 1.1.15, with cupsomatic included:
-# ========================================================================
-#
-# <replaceable>SOMETHNG</replaceable>-FILEFORMAT
-# |
-# |
-# V
-# <replaceable>something</replaceable>tops
-# |
-# |
-# V
-# APPLICATION/POSTSCRIPT
-# |
-# |
-# V
-# pstops
-# |
-# |
-# V
-# APPLICATION/VND.CUPS-POSTSCRIPT-----+
-# |
-# +------------------v------------------------------+
-# | Ghostscript . Ghostscript at work.... |
-# | at work... . (with "-sDEVICE= |
-# | (with . <replaceable>s.th.</replaceable>" |
-# | "-sDEVICE=cups") . |
-# | . |
-# | (CUPS standard) . (cupsomatic) |
-# | . |
-# | (= "postscript interpreter") |
-# | . |
-# +------------------v--------------v---------------+
-# | |
-# | |
-# APPLICATION/VND.CUPS-RASTER &gt;-------+ |
-# | |
-# | |
-# V |
-# rasterto<replaceable>something</replaceable> |
-# | (= "raster driver") |
-# | |
-# V |
-# SOMETHING-DEVICE-SPECIFIC &gt;------------------------+
-# |
-# |
-# V
-# backend
-#
-#
-# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to
-# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted.
-#
-##########################################################################
-</programlisting>
-
-</sect1>
-
-
-<sect1>
-<title>CUPS Print Drivers and Devices</title>
-
-<para>
-CUPS ships with good support for HP LaserJet type printers. You can install
-the driver as follows:
-
-<itemizedlist>
- <listitem><para>
- lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -m laserjet.ppd
- </para></listitem>
-</itemizedlist>
-
-(The "-m" switch will retrieve the "laserjet.ppd" from the standard repository
-for not-yet-installed-PPDs, which CUPS typically stores in
-<filename>/usr/share/cups/model</filename>. Alternatively, you may use
-"-P /absolute/filesystem/path/to/where/there/is/PPD/your.ppd").
-</para>
-
-<sect2>
-<title>Further printing steps</title>
-
-<para>
-Always also consult the database on linuxprinting.org for all recommendations
-about which driver is best used for each printer:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/printer_list.cgi">http://www.linuxprinting.org/printer_list.cgi</ulink></para>
-
-<para>
-There select your model and click on "Show". You'll arrive at a page listing
-all drivers working with your model. There will always be *one*
-<emphasis>recommended</emphasis> one. Try this one first. In your case
-("HP LaserJet 4 Plus"), you'll arrive here:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/show_printer.cgi?recnum=75104">http://www.linuxprinting.org/show_printer.cgi?recnum=75104</ulink></para>
-
-<para>
-The recommended driver is "ljet4". It has a link to the page for the ljet4
-driver too:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/show_driver.cgi?driver=ljet4">http://www.linuxprinting.org/show_driver.cgi?driver=ljet4</ulink></para>
-
-<para>
-On the driver's page, you'll find important and detailed info about how to use
-that driver within the various available spoolers. You can generate a PPD for
-CUPS. The PPD contains all the info about how to use your model and the driver;
-this is, once installed, working transparently for the user -- you'll only
-need to choose resolution, paper size etc. from the web-based menu or from
-the print dialog GUI or from the commandline...
-</para>
-
-<para>
-On the driver's page, choose to use the "PPD-O-Matic" online PPD generator
-program. Select your model and click "Generate PPD file". When you safe the
-appearing ASCII text file, don't use "cut'n'past" (as it could possiblly corrupt
-line endings and tabs), but use "Save as..." in your browser's menu. Save it
-at "/some/path/on/your/filesystem/somewhere/my-name-for-my-printer.ppd"
-</para>
-
-<para>
-Then install the printer:
-</para>
-<para><programlisting>
- "lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E \
- -P /some/path/on/your/filesystem/somewhere/my-name-for-my-printer.ppd"
-</programlisting></para>
-
-<para>
-Note, that for all the "Foomatic-PPDs" from Linuxprinting.org, you also need
-a special "CUPS filter" named "cupsomatic". Get the latest version of
-"cupsomatic" from:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/cupsomatic">http://www.linuxprinting.org/cupsomatic</ulink></para>
-
-<para>
-This needs to be copied to <filename>/usr/lib/cups/filter/cupsomatic</filename>
-and be made world executable. This filter is needed to read and act upon the
-specially encoded Foomatic comments, embedded in the printfile, which in turn
-are used to construct (transparently for you, the user) the complicated
-ghostscript command line needed for your printer/driver combo.
-</para>
-
-<para>
-You can have a look at all the options for the Ghostscript commandline supported
-by your printer and the ljet4 driver by going to the section "Execution details",
-selecting your model (Laserjet 4 Plus) and clicking on "Show execution details".
-This will bring up this web page:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/execution.cgi?driver=ljet4&amp;printer=75104&amp;.submit=Show+execution+details">http://www.linuxprinting.org/execution.cgi?driver=ljet4&amp;printer=75104&amp;.submit=Show+execution+details</ulink></para>
-
-<para>
-The ingenious thing is that the database is kept current. If there
-is a bug fix and an improvement somewhere in the database, you will
-always get the most current and stable and feature-rich driver by following
-the steps described above.
-</para>
-
-<note><para>
-Till Kamppeter from MandrakeSoft is doing an excellent job here that too few
-people are aware of. (So if you use it often, please send him a note showing
-your appreciation).</para></note>
-
-<para>
-The latest and greatest improvement now is support for "custom page sizes"
-for all those printers which support it.
-</para>
-
-<para>
-"cupsomatic" is documented here:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/cups-doc.html">http://www.linuxprinting.org/cups-doc.html</ulink></para>
-
-<para>
-More printing tutorial info may be found here:
-</para>
-
-<para><ulink url="http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/">http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/</ulink></para>
-
-<para>
-Note, that *all* the Foomatic drivers listed on Linuxprinting.org (now
-approaching the "all-time high" number of 1.000 for the supported models)
-are using a special filtering chain involving Ghostscript, as described
-in this document.
-</para>
-
-<para>
-Summary - You need:
-</para>
-
-<para>
-<simplelist>
-
- <member>A "foomatic+<replaceable>something</replaceable>" PPD is not enough to print with CUPS (but it is *one* important component)</member>
- <member>The "cupsomatic" filter script (Perl) in <filename>/usr/lib/cups/filters/</filename></member>
- <member>Perl to make cupsomatic run</member>
- <member>Ghostscript (because it is called and controlled by the PPD/cupsomatic combo in a way to fit your printermodel/driver combo.</member>
- <member>Ghostscript *must*, depending on the driver/model, contain support for a certain "device" (as shown by "gs -h")</member>
-</simplelist>
-</para>
-
-<para>
-In the case of the "hpijs" driver, you need a Ghostscript version, which
-has "ijs" amongst its supported devices in "gs -h". In the case of
-"hpijs+foomatic", a valid ghostscript commandline would be reading like this:
-</para>
-
-<para><programlisting>
- gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs \
- -sIjsServer=hpijs<replaceable>PageSize</replaceable> -dDuplex=<replaceable>Duplex</replaceable> <replaceable>Model</replaceable> \
- -r<replaceable>Resolution</replaceable>,PS:MediaPosition=<replaceable>InputSlot</replaceable> -dIjsUseOutputFD \
- -sOutputFile=- -
-</programlisting></para>
-
-<note><para>
-Note, that with CUPS and the "hpijs+foomatic" PPD (plus Perl and cupsomatic)
-you don't need to remember this. You can choose the available print options
-thru a GUI print command (like "glp" from ESP's commercially supported
-PrintPro software, or KDE's "kprinter", or GNOME's "gtklp" or the independent
-"xpp") or the CUPS web interface via human-readable drop-down selection
-menus.
-</para></note>
-
-<para>
-If you use "ESP Ghostscript" (also under the GPL, provided by Easy Software
-Products, the makers of CUPS, downloadable from
-<ulink url="http://www.cups.org/software.html">http://www.cups.org/software.html</ulink>,
-co-maintained by the developers of linuxprinting.org), you are guaranteed to
-have in use the most uptodate, bug-fixed, enhanced and stable version of a Free
-Ghostscript. It contains support for ~300 devices, whereas plain vanilla
-GNU Ghostscript 7.05 only has ~200.
-</para>
-
-<para>
-If you print only one CUPS test page, from the web interface and when you try to
-print a windows test page, it acts like the job was never sent:
-
-<simplelist>
- <member>Can you print "standard" jobs from the CUPS machine?</member>
- <member>Are the jobs from Windows visible in the Web interface on CUPS (http://localhost:631/)?</member>
- <member><emphasis>Most important:</emphasis> What kind of printer driver are you using on the Windows clients?</member>
-</simplelist>
-
-You can try to get a more detailed debugging info by setting "LogLevel debug" in
-<filename>/etc/cups/cupsd.conf</filename>, re-start cupsd and investigate <filename>/var/log/cups/error_log</filename>
-for the whereabouts of your Windows-originating printjobs:
-</para>
-
-<simplelist>
- <member>what does the "auto-typing" line say? which is the "MIME type" CUPS thinks is arriving from the Windows clients?</member>
- <member>are there "filter" available for this MIME type?</member>
- <member>are there "filter rules" defined in "/etc/cups/mime.convs" for this MIME type?</member>
-</simplelist>
-
-</sect2>
-
-</sect1>
-
-
-<sect1>
-<title>Limiting the number of pages users can print</title>
-
-<para>
-The feature you want is dependent on the real print subsystem you're using.
-Samba's part is always to receive the job files from the clients (filtered
-*or* unfiltered) and hand it over to this printing subsystem.
-</para>
-
-<para>
-Of course one could "hack" things with one's own scripts.
-</para>
-
-<para>
-But there is CUPS (Common Unix Printing System). CUPS supports "quotas".
-Quotas can be based on sizes of jobs or on the number of pages or both,
-and are spanning any time period you want.
-</para>
-
-<para>
-This is an example command how root would set a print quota in CUPS,
-assuming an existing printer named "quotaprinter":
-</para>
-
-<programlisting>
- lpadmin -p quotaprinter -o job-quota-period=604800 -o job-k-limit=1024 \
- -o job-page-limit=100
-</programlisting>
-
-<para>
-This would limit every single user to print 100 pages or 1024 KB of
-data (whichever comes first) within the last 604.800 seconds ( = 1 week).
-</para>
-
-<para>
-For CUPS to count correctly, the printfile needs to pass the CUPS "pstops" filter,
-otherwise it uses a "dummy" count of "1". Some printfiles don't pass it
-(eg: image files) but then those are mostly 1 page jobs anyway. This also means,
-proprietary drivers for the target printer running on the client computers and
-CUPS/Samba then spooling these files as "raw" (i.e. leaving them untouched, not
-filtering them), will be counted as "1-pagers" too!
-</para>
-
-<para>
-You need to send PostScript from the clients (i.e. run a PostScript driver there)
-for having the chance to get accounting done. If the printer is a non-PostScript model,
-you need to let CUPS do the job to convert the file to a print-ready format for the
-target printer. This will be working for currently ~1.000 different printer models, see
-</para>
-
-<programlisting>
- http://www.linuxprinting.org/printer_list.cgi
-</programlisting>
-
-<para>
-Before CUPS-1.1.16 your only option was to use the Adobe PostScript
-Driver on the Windows clients. The output of this driver was not always
-passed thru the "pstops" filter on the CUPS/Samba side, and therefor was
-not counted correctly (the reason is that it often --- depending on the
-"PPD" being used --- did write a "PJL"-header in front of the real
-PostScript which made CUPS to skip the pstops and go directy to
-the "pstoraster" stage).
-</para>
-
-<para>
-From CUPS-1.1.16 onward you can use the "CUPS PostScript Driver
-for Windows NT/2K/XP clients" (it is tagged in the download area of
-http://www.cups.org/ as the "cups-samba-1.1.16.tar.gz" package).
-It is *not* working for Win9x/ME clients. But it:
-</para>
-
-<simplelist>
- <member>it guarantees to not write an PJL-header</member>
- <member>it guarantees to still read and support all PJL-options named in the driver PPD with its own means</member>
- <member>it guarantees the file going thru the "pstops" filter on the CUPS/Samba server</member>
- <member>it guarantees to page-count correctly the printfile</member>
-</simplelist>
-
-<para>
-You can read more about the setup of this combination in the
-manpage for "cupsaddsmb" (only present with CUPS installed, only
-current with CUPS 1.1.16).
-</para>
-
-<para>
-These are the items CUPS logs in the "page_log" for every single *page* of a job:
-</para>
-
-<para><simplelist>
-<member>Printer name</member>
-<member>User name</member>
-<member>Job ID</member>
-<member>Time of printing</member>
-<member>the page number</member>
-<member>the number of copies</member>
-<member>a billing info string (optional)</member>
-</simplelist>
-</para>
-
-<para>
-Here is an extract of my CUPS server's page_log file to illustrate
-the format and included items:
-</para>
-
-<para><computeroutput>
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 1 2 #marketing
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 2 2 #marketing
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 3 2 #marketing
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 4 2 #marketing
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 5 2 #marketing
- infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 6 2 #marketing
-</computeroutput></para>
-
-<para>
-This was Job ID "40", printed on "infotec_IS2027" by user "kurt", a 6-page job
-printed in 2 copies and billed to "#marketing"...
-</para>
-
-<para>
-What flaws or shortcomings are there?
-</para>
-
-<simplelist>
- <member>the ones named above</member>
-
- <member>
- CUPS really counts the job pages being *processsed in software*
- (going thru the "RIP") rather than the physical sheets successfully
- leaving the printing device -- if there is a jam while printing
- the 5th sheet out of 1000 and the job is aborted by the printer,
- the "page count" will still show the figure of 1000 for that job
- </member>
-
- <member>
- all quotas are the same for all users (no flexibility to give the
- boss a higher quota than the clerk) no support for groups
- </member>
-
- <member>
- no means to read out the current balance or "used-up" number of current quota
- </member>
-
- <member>
- a user having used up 99 sheets of 100 quota will still be able to send and print a 1.000 sheet job
- </member>
-
- <member>
- a user being denied a job because of a filled-up quota doesn't get a meaningful
- error message from CUPS other than "client-error-not-possible".
- </member>
-</simplelist>
-
-<para>
-But this is the best system out there currently. And there are
-huge improvements under development:
-</para>
-
-<simplelist>
- <member>page counting will go into the "backends" (these talk
- directly to the printer and will increase the count in sync with the
- actual printing process -- a jam at the 5th sheet will lead to a stop in the counting)</member>
-
- <member>quotas will be handled more flexibly</member>
-
- <member>probably there will be support for users to inquire their "accounts" in advance</member>
-
- <member>probably there will be support for some other tools around this topic</member>
-</simplelist>
-
-<para>
-Other than the current stage of the CUPS development, I don't
-know any other ready-to-use tool which you could consider.
-</para>
-
-<para>
-You can download the driver files from
-<ulink url="http://www.cups.org/software.html">http://www.cups.org/software.html</ulink>.
-It is a separate package from the CUPS base software files, tagged as "CUPS 1.1.16
-Windows NT/2k/XP Printer Driver for SAMBA (tar.gz, 192k)". The filename to
-download is "cups-samba-1.1.16.tar.gz". Upon untar-/unzip-ping it will reveal
-the files:
-</para>
-
- <para>
- <computeroutput>
- cups-samba.install
- cups-samba.license
- cups-samba.readme
- cups-samba.remove
- cups-samba.ss
- </computeroutput>
- </para>
-
-<para>
-These have been packaged with the ESP meta packager software "EPM". The
-*.install and *.remove files are simple shell script, which untars the
-*.ss (which is nothing else than a tar-archive) and puts its contents
-into <filename>/usr/share/cups/drivers/</filename>. Its contents are 3 files:
-</para>
-
- <para>
- <computeroutput>
- cupsdrvr.dll
- cupsui.dll
- cups.hlp
- </computeroutput>
- </para>
-
-<caution><para>
-Due to a bug one CUPS release puts the <filename>cups.hlp</filename>
-into <filename>/usr/share/drivers/</filename> instead of
-<filename>/usr/share/cups/drivers/</filename>. To work around this, copy/move
-the file after running the "./cups-samba.install" script manually to the right place:
-</para>
-
- <para>
- <userinput> cp /usr/share/drivers/cups.hlp /usr/share/cups/drivers/
- </userinput>
- </para></caution>
-
-<note>
-<para>
-This new CUPS PostScript driver is currently binary-only, but free
-no source code is provided (yet). The reason is this: it has
-been developed with the help of the Microsoft Driver Developer Kit (DDK)
-and compiled with Microsoft Visual Studio 6. It is not clear to the driver
-developers if they are allowed to distribute the whole of the source code
-as Free Software. However, they will likely release the "diff" in source
-code under the GPL, so anybody with a license of Visual Studio and a DDK
-will be able to compile for him/herself.
-</para>
-
-<para>
-Once you have run the install script (and possibly manually moved the
-"cups.hlp" file to "/usr/share/cups/drivers/"), the driver is ready to be
-put into Samba's [print$] share (which often maps to "/etc/samba/drivers/"
-and contains a subdir tree with WIN40 and W32X86 branches), by running
-"cupsaddsmb" (see also "man cupsaddsmb" for CUPS 1.1.16). [Don't forget to
-put root into the smbpasswd file by running "smbpasswd" should you run
-this whole procedure for the first time.] Once the driver files are in the
-[print$] share, they are ready to be downloaded and installed by the
-Win NT/2k/XP clients.
-</para></note>
-
-
- <note><para>
- Win 9x/ME clients won't work with this driver. For these you'd
- still need to use the ADOBE*.* drivers as previously.
- </para></note>
-
- <note><para>
- It is not harming if you've still the ADOBE*.* driver files from
- previous installations in the "/usr/share/cups/drivers/" directory.
- The new cupsaddsmb (from 1.1.16) will automatically use the
- "newest" installed driver (which here then is the CUPS drivers).
- </para></note>
-
- <note><para>
- Should your Win clients have had the old ADOBE*.* files and the
- Adobe PostScript drivers installed, the download and installation
- of the new CUPS PostScript driver for Windows NT/2k/XP will fail
- at first.
- </para>
- <para>
- It is not enough to "delete" the printer (as the driver files
- will still be kept by the clients and re-used if you try to
- re-install the printer). To really get rid of the Adobe driver
- files on the clients, open the "Printers" folder (possibly via
- "Start --> Settings --> Control Panel --> Printers"), right-click
- onto the folder background and select "Server Properties". A
- new dialog opens; select the "Drivers" tab; on the list select
- the driver you want to delete and click on the "Delete" button.
- (This will only work if there is no single printer left which
- uses that particular driver -- you need to "delete" all printers
- using this driver in the "Printers" folder first.)
- </para>
- </note>
-
- <note><para>
- Once you have successfully downloaded the CUPS PostScript driver
- to a client, you can easily switch all printers to this one
- by proceeding as described elsewhere in the "Samba HOWTO
- Collection" to change a driver for an existing printer.
- </para></note>
-
-<para>
-What are the benefits with the "CUPS PostScript driver for Windows NT/2k/XP"
-as compared to the Adobe drivers?
-</para>
-
-<para>
-<itemizedlist>
- <listitem><para>
- no hassle with the Adobe EULA
- </para></listitem>
-
- <listitem><para>
- no hassle with the question "where do I get the ADOBE*.* driver files from?"
- </para></listitem>
-
- <listitem><para>
- the Adobe drivers (depending on the printer PPD associated with them)
- often put a PJL header in front of the core PostScript part of the print
- file (thus the file starts with "<replaceable>1B</replaceable>%-12345X"
- or "<replaceable>escape</replaceable>%-12345X"
- instead of "%!PS"). This leads to the CUPS daemon autotyping the
- arriving file as a print-ready file, not requiring a pass thru the
- "pstops" filter (to speak more technical, it is not regarded as the
- generic MIME type "application/postscript", but as the more special
- MIME type "application/cups.vnd-postscript"), which therefore also
- leads to the page accounting in "/var/log/cups/page_log" not receiving
- the exact mumber of pages; instead the dummy page number of "1" is
- logged in a standard setup)
- </para></listitem>
-
- <listitem><para>
- the Adobe driver has more options to "mis-configure" the PostScript
- generated by it (like setting it inadvertedly to "Optimize for Speed",
- instead of "Optimize for Portability", which could lead to CUPS being
- unable to process it)
- </para></listitem>
-
- <listitem><para>
- the CUPS PostScript driver output sent by Windows clients to the CUPS
- server will be guaranteed to be auto-typed as generic MIME type
- "application/postscript", thusly passing thru the CUPS "pstops" filter
- and logging the correct number of pages in the page_log for accounting
- and quota purposes
- </para></listitem>
-
- <listitem><para>
- the CUPS PostScript driver supports the sending of additional print
- options by the Win NT/2k/XP clients, such as naming the CUPS standard
- banner pages (or the custom ones, should they be installed at the time
- of driver download), using the CUPS "page-label" option, setting a
- job-priority and setting the scheduled time of printing (with the option
- to support additional useful IPP job attributes in the future).
- </para></listitem>
-
- <listitem><para>
- the CUPS PostScript driver supports the inclusion of the new
- "*cupsJobTicket" comments at the beginnig of the PostScript file (which
- could be used in the future for all sort of beneficial extensions on
- the CUPS side, but which will not disturb any other application as those
- will regard it as a comment and simply ignore it).
- </para></listitem>
-
- <listitem><para>
- the CUPS PostScript driver will be the heart of the fully fledged CUPS
- IPP client for Windows NT/2k/XP to be released soon (probably alongside
- the first Beta release for CUPS 1.2).
- </para></listitem>
-
-</itemizedlist>
-</para>
-</sect1>
-
-<sect1>
-<title>Advanced Postscript Printing from MS Windows</title>
-
-<para>
-Let the Windows Clients use a PostScript driver to deliver poistscript to
-the samba print server (just like any Linux or Unix Client would also use
-PostScript to send to the server)
-</para>
-
-<para>
-Make the Unix printing subsystem to which Samba sends the job convert the
-incoming PostScript files to the native print format of the target printers
-(would be PCL if you have an HP printer)
-</para>
-
-<para>
-Now if you are afraid that this would just mean using a *Generic* PostScript
-driver for the clients that has no Simplex/Duplex selection, and no paper tray
-choice, but you need them to be able to set up print jobs, with all the bells
-and whistles of your printers:-
-</para>
-
-<simplelist>
- <member>Not possible with traditional spooling systems</member>
-
- <member>
- But perfectly supported by CUPS (which uses "PPD" files to
- describe how to control the print options for PostScript and
- non-PostScript devices alike...
- </member>
-</simplelist>
-
-<para>
-CUPS PPDs are working perfectly on Windows clients who use Adobe PostScript
-drivers (or the new CUPS PostScript driver for Windows NT/2K/XP). Clients can use
-them to setup the job to their liking and CUPS will use the received job options
-to make the (PCL-, ESC/P- or PostScript-) printer behave as required.
-</para>
-
-<para>
-If you want to have the additional benefit of page count logging and accounting
-then the CUPS PostScript driver is the best choice (better than the Adobe one).
-</para>
-
-<para>
-If you want to make the drivers downloadable for the clients then "cupsaddsmb" is
-your friend. It will setup the [print$] share on the Samba host to be ready to serve
-the clients for a "point and print" driver installation.
-</para>
-
-<warning>
-<para>What strings are attached?</para></warning>
-
-<para>
-There are some. But, given the sheer CPU power you can buy nowadays,
-these can be overcome easily. The strings:
-</para>
-
-<para>
-Well, if the CUPS/Samba side will have to print to many printers serving many users,
-you probably will need to set up a second server (which can do automatic load balancing
-with the first one, plus a degree of fail-over mechanism). Converting the incoming
-PostScript jobs, "interpreting" them for non-PostScript printers, amounts to the work
-of a "RIP" (Raster Image Processor) done in software. This requires more CPU and RAM
-than for the mere "raw spooling" task your current setup is solving. It all depends
-on the avarage and peak printing load the server should be able to handle.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Auto-Deletion of CUPS spool files</title>
-
-<para>
-Samba print files pass thru two "spool" directories. One the incoming directory
-managed by Samba, (set eg: in the <command>path = /var/spool/samba</command> directive in the [printers]
-section of &smb.conf;). Second is the spool directory of your UNIX print subsystem.
-For CUPS it is normally "/var/spool/cups/", as set by the cupsd.conf directive
-"RequestRoot /var/spool/cups".
-</para>
-
-<para>
-I am not sure, which one of your directories keeps the files. From what you say,
-it is most likely the Samba part.
-</para>
-
-<para>
-For the CUPS part, you may want to consult:
-</para>
-
-<simplelist>
-<member>http://localhost:631/sam.html#PreserveJobFiles</member>
-<member>http://localhost:631/sam.html#PreserveJobHistory</member>
-<member>http://localhost:631/sam.html#MaxJobs</member>
-</simplelist>
-
-<para>
-There are the settings described for your CUPS daemon, which could lead to completed
-job files not being deleted.
-</para>
-
-<para>
-"PreserveJobHistory Yes" -- keeps some details of jobs in
-cupsd's mind (well it keeps the "c12345", "c12346" etc. files
-in the CUPS spool directory, which do a similar job as the
-old-fashioned BSD-LPD control files). This is set to "Yes"
-as a default.
-</para>
-
-<para>
-"PreserveJobFiles Yes" -- keeps the job files themselves in
-cupsd's mind (well it keeps the "d12345", "d12346" etc. files
-in the CUPS spool directory...). This is set to "No" as the
-CUPS default.
-</para>
-
-<para>
-"MaxJobs 500" -- this directive controls the maximum number
-of jobs that are kept in memory. Once the number of jobs
-reaches the limit, the oldest completed job is automatically
-purged from the system to make room for the new one. If all
-of the known jobs are still pending or active then the new
-job will be rejected. Setting the maximum to 0 disables this
-functionality. The default setting is 0.
-</para>
-
-<para>
-(There are also additional settings for "MaxJobsPerUser" and
-"MaxJobsPerPrinter"...)
-</para>
-
-<para>
-For everything to work as announced, you need to have three things:
-</para>
-
-<simplelist>
-
- <member>
- a Samba-&smbd; which is compiled against "libcups" (Check on Linux by running <userinput>ldd `which smbd`</userinput>)
- </member>
-
- <member>
- a Samba-&smb.conf; setting of <command>printing = cups</command>
- </member>
-
- <member>
- another Samba-&smb.conf; setting of <command>printcap = cups</command>
- </member>
-
-</simplelist>
-
-<note><para>
-Note, that in this case all other manually set printing-related
-commands (like "print command", "lpq command", "lprm command",
-"lppause command" or "lpresume command") are ignored and they
-should normally have no influence what-so-ever on your printing.
-</para></note>
-
-<para>
-If you want to do things manually, replace the "printing = cups"
-by "printing = bsd". Then your manually set commands may work
-(haven't tested this), and a "print command = lp -d %P %s; rm %s"
-may do what you need.
-</para>
-
-<para>
-You forgot to mention the CUPS version you're using. If you did
-set things up as described in the man pages, then the Samba
-spool files should be deleted. Otherwise it may be a bug. On
-the CUPS side, you can control the behaviour as described
-above.
-</para>
-
-<para>
-If you have more problems, post the output of these commands:
-</para>
-
-<para>
-<userinput>
- grep -v ^# /etc/cups/cupsd.conf | grep -v ^$
- grep -v ^# /etc/samba/smb.conf | grep -v ^$ | grep -v "^;"
-</userinput>
-</para>
-
-<para>
-(adapt paths as needed). These commands sanitize the files
-and cut out the empty lines and lines with comments, providing
-the "naked settings" in a compact way.
-</para>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Compiling.sgml b/docs/docbook/projdoc/Compiling.sgml
deleted file mode 100644
index 664975779c..0000000000
--- a/docs/docbook/projdoc/Compiling.sgml
+++ /dev/null
@@ -1,433 +0,0 @@
-<chapter id="compiling">
-<chapterinfo>
- <author>
- <affiliation>
- <orgname>Samba Team</orgname>
- </affiliation>
- </author>
- &author.jelmer;
-
- <pubdate> (22 May 2001) </pubdate>
- <pubdate> 18 March 2003 </pubdate>
-</chapterinfo>
-
-<title>How to compile SAMBA</title>
-
-<para>
-You can obtain the samba source from the <ulink url="http://samba.org/">samba website</ulink>. To obtain a development version,
-you can download samba from CVS or using rsync.
-</para>
-
-<sect1>
-<title>Access Samba source code via CVS</title>
-
-<sect2>
-<title>Introduction</title>
-
-<para>
-Samba is developed in an open environment. Developers use CVS
-(Concurrent Versioning System) to "checkin" (also known as
-"commit") new source code. Samba's various CVS branches can
-be accessed via anonymous CVS using the instructions
-detailed in this chapter.
-</para>
-
-<para>
-This chapter is a modified version of the instructions found at
-<ulink url="http://samba.org/samba/cvs.html">http://samba.org/samba/cvs.html</ulink>
-</para>
-
-</sect2>
-
-<sect2>
-<title>CVS Access to samba.org</title>
-
-<para>
-The machine samba.org runs a publicly accessible CVS
-repository for access to the source code of several packages,
-including samba, rsync and jitterbug. There are two main ways of
-accessing the CVS server on this host.
-</para>
-
-<sect3>
-<title>Access via CVSweb</title>
-
-<para>
-You can access the source code via your
-favourite WWW browser. This allows you to access the contents of
-individual files in the repository and also to look at the revision
-history and commit logs of individual files. You can also ask for a diff
-listing between any two versions on the repository.
-</para>
-
-<para>
-Use the URL : <ulink
-url="http://samba.org/cgi-bin/cvsweb">http://samba.org/cgi-bin/cvsweb</ulink>
-</para>
-</sect3>
-
-<sect3>
-<title>Access via cvs</title>
-
-<para>
-You can also access the source code via a
-normal cvs client. This gives you much more control over what you can
-do with the repository and allows you to checkout whole source trees
-and keep them up to date via normal cvs commands. This is the
-preferred method of access if you are a developer and not
-just a casual browser.
-</para>
-
-<para>
-To download the latest cvs source code, point your
-browser at the URL : <ulink url="http://www.cyclic.com/">http://www.cyclic.com/</ulink>.
-and click on the 'How to get cvs' link. CVS is free software under
-the GNU GPL (as is Samba). Note that there are several graphical CVS clients
-which provide a graphical interface to the sometimes mundane CVS commands.
-Links to theses clients are also available from http://www.cyclic.com.
-</para>
-
-<para>
-To gain access via anonymous cvs use the following steps.
-For this example it is assumed that you want a copy of the
-samba source code. For the other source code repositories
-on this system just substitute the correct package name
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- Install a recent copy of cvs. All you really need is a
- copy of the cvs client binary.
- </para>
-</listitem>
-
-
-<listitem>
- <para>
- Run the command
- </para>
-
- <para>
- <userinput>cvs -d :pserver:cvs@samba.org:/cvsroot login</userinput>
- </para>
-
- <para>
- When it asks you for a password type <userinput>cvs</userinput>.
- </para>
-</listitem>
-
-
-<listitem>
- <para>
- Run the command
- </para>
-
- <para>
- <userinput>cvs -d :pserver:cvs@samba.org:/cvsroot co samba</userinput>
- </para>
-
- <para>
- This will create a directory called samba containing the
- latest samba source code (i.e. the HEAD tagged cvs branch). This
- currently corresponds to the 3.0 development tree.
- </para>
-
- <para>
- CVS branches other then HEAD can be obtained by using the <parameter>-r</parameter>
- and defining a tag name. A list of branch tag names can be found on the
- "Development" page of the samba web site. A common request is to obtain the
- latest 2.2 release code. This could be done by using the following userinput.
- </para>
-
- <para>
- <userinput>cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_2_2 samba</userinput>
- </para>
-</listitem>
-
-<listitem>
- <para>
- Whenever you want to merge in the latest code changes use
- the following command from within the samba directory:
- </para>
-
- <para>
- <userinput>cvs update -d -P</userinput>
- </para>
-</listitem>
-</orderedlist>
-
-</sect3>
-</sect2>
-
-</sect1>
-
-<sect1>
- <title>Accessing the samba sources via rsync and ftp</title>
-
- <para>
- pserver.samba.org also exports unpacked copies of most parts of the CVS tree at <ulink url="ftp://pserver.samba.org/pub/unpacked">ftp://pserver.samba.org/pub/unpacked</ulink> and also via anonymous rsync at rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp.
- See <ulink url="http://rsync.samba.org/">the rsync homepage</ulink> for more info on rsync.
- </para>
-
- <para>
- The disadvantage of the unpacked trees
- is that they do not support automatic
- merging of local changes like CVS does.
- rsync access is most convenient for an
- initial install.
- </para>
-</sect1>
-
-<sect1>
-<title>Verifying Samba's PGP signature</title>
-
-<para>
-In these days of insecurity, it's strongly recommended that you verify the PGP signature for any
-source file before installing it. According to Jerry Carter of the Samba Team, only about 22% of
-all Samba downloads have had a corresponding PGP signature download (a very low percentage, which
-should be considered a bad thing). Even if you're not downloading from a mirror site, verifying PGP
-signatures should be a standard reflex.
-</para>
-
-
-<para>
-With that said, go ahead and download the following files:
-</para>
-
-<para><programlisting>
- $ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
- $ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc
-</programlisting></para>
-
-<para>
-The first file is the PGP signature for the Samba source file; the other is the Samba public
-PGP key itself. Import the public PGP key with:
-</para>
-
-<programlisting>
- $ gpg --import samba-pubkey.asc
-</programlisting>
-
-<para>
-And verify the Samba source code integrity with:
-</para>
-
-<programlisting>
- $ gzip -d samba-2.2.8a.tar.gz
- $ gpg --verify samba-2.2.8a.tar.asc
-</programlisting>
-
-<para>
-If you receive a message like, "Good signature from Samba Distribution Verification Key..."
-then all is well. The warnings about trust relationships can be ignored. An example of what
-you would not want to see would be:
-</para>
-
-<programlisting>
- gpg: BAD signature from "Samba Distribution Verification Key"
-</programlisting>
-
-</sect1>
-
-<sect1>
- <title>Building the Binaries</title>
-
- <para>To do this, first run the program <userinput>./configure
- </userinput> in the source directory. This should automatically
- configure Samba for your operating system. If you have unusual
- needs then you may wish to run</para>
-
- <para><prompt>root# </prompt><userinput>./configure --help
- </userinput></para>
-
- <para>first to see what special options you can enable.
- Then executing</para>
-
- <para><prompt>root# </prompt><userinput>make</userinput></para>
-
- <para>will create the binaries. Once it's successfully
- compiled you can use </para>
-
- <para><prompt>root# </prompt><userinput>make install</userinput></para>
-
- <para>to install the binaries and manual pages. You can
- separately install the binaries and/or man pages using</para>
-
- <para><prompt>root# </prompt><userinput>make installbin
- </userinput></para>
-
- <para>and</para>
-
- <para><prompt>root# </prompt><userinput>make installman
- </userinput></para>
-
- <para>Note that if you are upgrading for a previous version
- of Samba you might like to know that the old versions of
- the binaries will be renamed with a ".old" extension. You
- can go back to the previous version with</para>
-
- <para><prompt>root# </prompt><userinput>make revert
- </userinput></para>
-
- <para>if you find this version a disaster!</para>
-
- <sect2>
- <title>Compiling samba with Active Directory support</title>
-
- <para>In order to compile samba with ADS support, you need to have installed
- on your system:
- <simplelist>
- <member>the MIT kerberos development libraries (either install from the sources or use a package). The heimdal libraries will not work.</member>
- <member>the OpenLDAP development libraries.</member>
-</simplelist></para>
-
- <para>If your kerberos libraries are in a non-standard location then
- remember to add the configure option --with-krb5=DIR.</para>
-
- <para>After you run configure make sure that <filename>include/config.h</filename> it generates contains lines like this:</para>
-
- <para><programlisting>
-#define HAVE_KRB5 1
-#define HAVE_LDAP 1
- </programlisting></para>
-
- <para>If it doesn't then configure did not find your krb5 libraries or
- your ldap libraries. Look in config.log to figure out why and fix
- it.</para>
-
- <sect3>
- <title>Installing the required packages for Debian</title>
-
- <para>On Debian you need to install the following packages:</para>
- <para>
- <simplelist>
- <member>libkrb5-dev</member>
- <member>krb5-user</member>
- </simplelist>
- </para>
- </sect3>
-
- <sect3>
- <title>Installing the required packages for RedHat</title>
-
- <para>On RedHat this means you should have at least: </para>
- <para>
- <simplelist>
- <member>krb5-workstation (for kinit)</member>
- <member>krb5-libs (for linking with)</member>
- <member>krb5-devel (because you are compiling from source)</member>
- </simplelist>
- </para>
-
- <para>in addition to the standard development environment.</para>
-
- <para>Note that these are not standard on a RedHat install, and you may need
- to get them off CD2.</para>
-
- </sect3>
-
- </sect2>
-
-</sect1>
-
-<sect1>
- <title>Starting the smbd and nmbd</title>
-
- <para>You must choose to start smbd and nmbd either
- as daemons or from <application>inetd</application>Don't try
- to do both! Either you can put them in <filename>
- inetd.conf</filename> and have them started on demand
- by <application>inetd</application>, or you can start them as
- daemons either from the command line or in <filename>
- /etc/rc.local</filename>. See the man pages for details
- on the command line options. Take particular care to read
- the bit about what user you need to be in order to start
- Samba. In many cases you must be root.</para>
-
- <para>The main advantage of starting <application>smbd</application>
- and <application>nmbd</application> using the recommended daemon method
- is that they will respond slightly more quickly to an initial connection
- request.</para>
-
- <sect2>
- <title>Starting from inetd.conf</title>
-
- <para>NOTE; The following will be different if
- you use NIS, NIS+ or LDAP to distribute services maps.</para>
-
- <para>Look at your <filename>/etc/services</filename>.
- What is defined at port 139/tcp. If nothing is defined
- then add a line like this:</para>
-
- <para><userinput>netbios-ssn 139/tcp</userinput></para>
-
- <para>similarly for 137/udp you should have an entry like:</para>
-
- <para><userinput>netbios-ns 137/udp</userinput></para>
-
- <para>Next edit your <filename>/etc/inetd.conf</filename>
- and add two lines something like this:</para>
-
- <para><programlisting>
- netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd
- netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd
- </programlisting></para>
-
- <para>The exact syntax of <filename>/etc/inetd.conf</filename>
- varies between unixes. Look at the other entries in inetd.conf
- for a guide.</para>
-
- <note><para>Some unixes already have entries like netbios_ns
- (note the underscore) in <filename>/etc/services</filename>.
- You must either edit <filename>/etc/services</filename> or
- <filename>/etc/inetd.conf</filename> to make them consistent.</para></note>
-
- <note><para>On many systems you may need to use the
- <command>interfaces</command> option in &smb.conf; to specify the IP address
- and netmask of your interfaces. Run <application>ifconfig</application>
- as root if you don't know what the broadcast is for your
- net. &nmbd; tries to determine it at run
- time, but fails on some unixes.
- </para></note>
-
- <warning><para>Many unixes only accept around 5
- parameters on the command line in <filename>inetd.conf</filename>.
- This means you shouldn't use spaces between the options and
- arguments, or you should use a script, and start the script
- from <command>inetd</command>.</para></warning>
-
- <para>Restart <command>inetd</command>, perhaps just send
- it a HUP. If you have installed an earlier version of <application>
- nmbd</application> then you may need to kill nmbd as well.</para>
- </sect2>
-
- <sect2>
- <title>Alternative: starting it as a daemon</title>
-
- <para>To start the server as a daemon you should create
- a script something like this one, perhaps calling
- it <filename>startsmb</filename>.</para>
-
- <para><programlisting>
- #!/bin/sh
- /usr/local/samba/bin/smbd -D
- /usr/local/samba/bin/nmbd -D
- </programlisting></para>
-
- <para>then make it executable with <command>chmod
- +x startsmb</command></para>
-
- <para>You can then run <command>startsmb</command> by
- hand or execute it from <filename>/etc/rc.local</filename>
- </para>
-
- <para>To kill it send a kill signal to the processes
- <command>nmbd</command> and <command>smbd</command>.</para>
-
- <note><para>If you use the SVR4 style init system then
- you may like to look at the <filename>examples/svr4-startup</filename>
- script to make Samba fit into that system.</para></note>
- </sect2>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/DOMAIN_MEMBER.sgml b/docs/docbook/projdoc/DOMAIN_MEMBER.sgml
deleted file mode 100644
index a5921e8ce3..0000000000
--- a/docs/docbook/projdoc/DOMAIN_MEMBER.sgml
+++ /dev/null
@@ -1,161 +0,0 @@
-<chapter id="domain-member">
-
-<chapterinfo>
- &author.jeremy;
- &author.jerry;
- <pubdate>16 Apr 2001</pubdate>
-</chapterinfo>
-
-
-<title>Samba as a NT4 or Win2k domain member</title>
-
-<sect1>
-
- <title>Joining an NT Domain with Samba 3.0</title>
- <para><emphasis>Assumptions:</emphasis>
- <programlisting>
- NetBIOS name: SERV1
- Win2K/NT domain name: DOM
- Domain's PDC NetBIOS name: DOMPDC
- Domain's BDC NetBIOS names: DOMBDC1 and DOMBDC2
- </programlisting>
- </para>
-
- <para>First, you must edit your &smb.conf; file to tell Samba it should
- now use domain security.</para>
-
- <para>Change (or add) your <ulink url="smb.conf.5.html#SECURITY">
- <parameter>security =</parameter></ulink> line in the [global] section
- of your &smb.conf; to read:</para>
-
- <para><command>security = domain</command></para>
-
- <para>Next change the <ulink url="smb.conf.5.html#WORKGROUP"><parameter>
- workgroup =</parameter></ulink> line in the [global] section to read: </para>
-
- <para><command>workgroup = DOM</command></para>
-
- <para>as this is the name of the domain we are joining. </para>
-
- <para>You must also have the parameter <ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">
- <parameter>encrypt passwords</parameter></ulink> set to <constant>yes
- </constant> in order for your users to authenticate to the NT PDC.</para>
-
- <para>Finally, add (or modify) a <ulink url="smb.conf.5.html#PASSWORDSERVER">
- <parameter>password server =</parameter></ulink> line in the [global]
- section to read: </para>
-
- <para><command>password server = DOMPDC DOMBDC1 DOMBDC2</command></para>
-
- <para>These are the primary and backup domain controllers Samba
- will attempt to contact in order to authenticate users. Samba will
- try to contact each of these servers in order, so you may want to
- rearrange this list in order to spread out the authentication load
- among domain controllers.</para>
-
- <para>Alternatively, if you want smbd to automatically determine
- the list of Domain controllers to use for authentication, you may
- set this line to be :</para>
-
- <para><command>password server = *</command></para>
-
- <para>This method, allows Samba to use exactly the same
- mechanism that NT does. This
- method either broadcasts or uses a WINS database in order to
- find domain controllers to authenticate against.</para>
-
- <para>In order to actually join the domain, you must run this
- command:</para>
-
- <para><prompt>root# </prompt><userinput>net join -S DOMPDC
- -U<replaceable>Administrator%password</replaceable></userinput></para>
-
- <para>
- If the <userinput>-S DOMPDC</userinput> argument is not given then
- the domain name will be obtained from smb.conf.
- </para>
-
- <para>as we are joining the domain DOM and the PDC for that domain
- (the only machine that has write access to the domain SAM database)
- is DOMPDC. The <replaceable>Administrator%password</replaceable> is
- the login name and password for an account which has the necessary
- privilege to add machines to the domain. If this is successful
- you will see the message:</para>
-
- <para><computeroutput>Joined domain DOM.</computeroutput>
- or <computeroutput>Joined 'SERV1' to realm 'MYREALM'</computeroutput>
- </para>
-
- <para>in your terminal window. See the <ulink url="net.8.html">
- net(8)</ulink> man page for more details.</para>
-
- <para>This process joins the server to the domain
- without having to create the machine trust account on the PDC
- beforehand.</para>
-
- <para>This command goes through the machine account password
- change protocol, then writes the new (random) machine account
- password for this Samba server into a file in the same directory
- in which an smbpasswd file would be stored - normally :</para>
-
- <para><filename>/usr/local/samba/private/secrets.tdb</filename></para>
-
- <para>This file is created and owned by root and is not
- readable by any other user. It is the key to the domain-level
- security for your system, and should be treated as carefully
- as a shadow password file.</para>
-
- <para>Finally, restart your Samba daemons and get ready for
- clients to begin using domain security!</para>
-</sect1>
-
-<sect1>
- <title>Why is this better than security = server?</title>
-
- <para>Currently, domain security in Samba doesn't free you from
- having to create local Unix users to represent the users attaching
- to your server. This means that if domain user <constant>DOM\fred
- </constant> attaches to your domain security Samba server, there needs
- to be a local Unix user fred to represent that user in the Unix
- filesystem. This is very similar to the older Samba security mode
- <ulink url="smb.conf.5.html#SECURITYEQUALSSERVER">security = server</ulink>,
- where Samba would pass through the authentication request to a Windows
- NT server in the same way as a Windows 95 or Windows 98 server would.
- </para>
-
- <para>Please refer to the <ulink url="winbind.html">Winbind
- paper</ulink> for information on a system to automatically
- assign UNIX uids and gids to Windows NT Domain users and groups.
- </para>
-
- <para>The advantage to domain-level security is that the
- authentication in domain-level security is passed down the authenticated
- RPC channel in exactly the same way that an NT server would do it. This
- means Samba servers now participate in domain trust relationships in
- exactly the same way NT servers do (i.e., you can add Samba servers into
- a resource domain and have the authentication passed on from a resource
- domain PDC to an account domain PDC).</para>
-
- <para>In addition, with <command>security = server</command> every Samba
- daemon on a server has to keep a connection open to the
- authenticating server for as long as that daemon lasts. This can drain
- the connection resources on a Microsoft NT server and cause it to run
- out of available connections. With <command>security = domain</command>,
- however, the Samba daemons connect to the PDC/BDC only for as long
- as is necessary to authenticate the user, and then drop the connection,
- thus conserving PDC connection resources.</para>
-
- <para>And finally, acting in the same manner as an NT server
- authenticating to a PDC means that as part of the authentication
- reply, the Samba server gets the user identification information such
- as the user SID, the list of NT groups the user belongs to, etc. </para>
-
- <note><para> Much of the text of this document
- was first published in the Web magazine <ulink url="http://www.linuxworld.com">
- LinuxWorld</ulink> as the article <ulink
- url="http://www.linuxworld.com/linuxworld/lw-1998-10/lw-10-samba.html">Doing
- the NIS/NT Samba</ulink>.</para></note>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/Diagnosis.sgml b/docs/docbook/projdoc/Diagnosis.sgml
deleted file mode 100644
index 150f071b78..0000000000
--- a/docs/docbook/projdoc/Diagnosis.sgml
+++ /dev/null
@@ -1,522 +0,0 @@
-<chapter id="diagnosis">
-<chapterinfo>
- &author.tridge;
- &author.jelmer;
- <pubdate>Wed Jan 15</pubdate>
-</chapterinfo>
-
-<title>The samba checklist</title>
-
-<sect1>
-<title>Introduction</title>
-
-<para>
-This file contains a list of tests you can perform to validate your
-Samba server. It also tells you what the likely cause of the problem
-is if it fails any one of these steps. If it passes all these tests
-then it is probably working fine.
-</para>
-
-<para>
-You should do ALL the tests, in the order shown. We have tried to
-carefully choose them so later tests only use capabilities verified in
-the earlier tests. However, do not stop at the first error as there
-have been some instances when continuing with the tests has helped
-to solve a problem.
-</para>
-
-<para>
-If you send one of the samba mailing lists an email saying "it doesn't work"
-and you have not followed this test procedure then you should not be surprised
-if your email is ignored.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Assumptions</title>
-
-<para>
-In all of the tests it is assumed you have a Samba server called
-BIGSERVER and a PC called ACLIENT both in workgroup TESTGROUP.
-</para>
-
-<para>
-The procedure is similar for other types of clients.
-</para>
-
-<para>
-It is also assumed you know the name of an available share in your
-&smb.conf;. I will assume this share is called <replaceable>tmp</replaceable>.
-You can add a <replaceable>tmp</replaceable> share like this by adding the
-following to &smb.conf;:
-</para>
-
-<para><programlisting>
-
-[tmp]
- comment = temporary files
- path = /tmp
- read only = yes
-
-</programlisting>
-</para>
-
-<note><para>
-These tests assume version 3.0 or later of the samba suite.
-Some commands shown did not exist in earlier versions.
-</para></note>
-
-<para>
-Please pay attention to the error messages you receive. If any error message
-reports that your server is being unfriendly you should first check that your
-IP name resolution is correctly set up. eg: Make sure your <filename>/etc/resolv.conf</filename>
-file points to name servers that really do exist.
-</para>
-
-<para>
-Also, if you do not have DNS server access for name resolution please check
-that the settings for your &smb.conf; file results in <command>dns proxy = no</command>. The
-best way to check this is with <userinput>testparm smb.conf</userinput>.
-</para>
-
-<para>
-It is helpful to monitor the log files during testing by using the
-<command>tail -F <replaceable>log_file_name</replaceable></command> in a separate
-terminal console (use ctrl-alt-F1 through F6 or multiple terminals in X).
-Relevant log files can be found (for default installations) in
-<filename>/usr/local/samba/var</filename>. Also, connection logs from
-machines can be found here or possibly in <filename>/var/log/samba</filename>
-depending on how or if you specified logging in your &smb.conf; file.
-</para>
-
-<para>
-If you make changes to your &smb.conf; file while going through these test,
-don't forget to restart &smbd; and &nmbd;.
-</para>
-
-</sect1>
-
-<sect1>
-<title>The tests</title>
-<procedure>
-<title>Diagnosing your samba server</title>
-
-<step performance="required">
-<para>
-In the directory in which you store your &smb.conf; file, run the command
-<userinput>testparm smb.conf</userinput>. If it reports any errors then your &smb.conf;
-configuration file is faulty.
-</para>
-
-<note><para>
-Your &smb.conf; file may be located in: <filename>/etc/samba</filename>
-Or in: <filename>/usr/local/samba/lib</filename>
-</para></note>
-</step>
-
-<step performance="required">
-<para>
-Run the command <userinput>ping BIGSERVER</userinput> from the PC and
-<userinput>ping ACLIENT</userinput> from
-the unix box. If you don't get a valid response then your TCP/IP
-software is not correctly installed.
-</para>
-
-<para>
-Note that you will need to start a "dos prompt" window on the PC to
-run ping.
-</para>
-
-<para>
-If you get a message saying "host not found" or similar then your DNS
-software or <filename>/etc/hosts</filename> file is not correctly setup.
-It is possible to
-run samba without DNS entries for the server and client, but I assume
-you do have correct entries for the remainder of these tests.
-</para>
-
-<para>
-Another reason why ping might fail is if your host is running firewall
-software. You will need to relax the rules to let in the workstation
-in question, perhaps by allowing access from another subnet (on Linux
-this is done via the <application>ipfwadm</application> program.)
-</para>
-
-<para>
-Note: Modern Linux distributions install ipchains/iptables by default.
-This is a common problem that is often overlooked.
-</para>
-</step>
-
-<step performance="required">
-<para>
-Run the command <userinput>smbclient -L BIGSERVER</userinput> on the unix box. You
-should get a list of available shares back.
-</para>
-
-<para>
-If you get a error message containing the string "Bad password" then
-you probably have either an incorrect <command>hosts allow</command>,
-<command>hosts deny</command> or <command>valid users</command> line in your
-&smb.conf;, or your guest account is not
-valid. Check what your guest account is using &testparm; and
-temporarily remove any <command>hosts allow</command>, <command>hosts deny</command>, <command>valid users</command> or <command>invalid users</command> lines.
-</para>
-
-<para>
-If you get a "connection refused" response then the smbd server may
-not be running. If you installed it in inetd.conf then you probably edited
-that file incorrectly. If you installed it as a daemon then check that
-it is running, and check that the netbios-ssn port is in a LISTEN
-state using <userinput>netstat -a</userinput>.
-</para>
-
-<note><para>
-Some Unix / Linux systems use <command>xinetd</command> in place of
-<command>inetd</command>. Check your system documentation for the location
-of the control file/s for your particular system implementation of
-this network super daemon.
-</para></note>
-
-<para>
-If you get a "session request failed" then the server refused the
-connection. If it says "Your server software is being unfriendly" then
-its probably because you have invalid command line parameters to &smbd;,
-or a similar fatal problem with the initial startup of &smbd;. Also
-check your config file (&smb.conf;) for syntax errors with &testparm;
-and that the various directories where samba keeps its log and lock
-files exist.
-</para>
-
-<para>
-There are a number of reasons for which smbd may refuse or decline
-a session request. The most common of these involve one or more of
-the following &smb.conf; file entries:
-</para>
-
-<para><programlisting>
- hosts deny = ALL
- hosts allow = xxx.xxx.xxx.xxx/yy
- bind interfaces only = Yes
-</programlisting></para>
-
-<para>
-In the above, no allowance has been made for any session requests that
-will automatically translate to the loopback adaptor address 127.0.0.1.
-To solve this problem change these lines to:
-</para>
-
-<para><programlisting>
- hosts deny = ALL
- hosts allow = xxx.xxx.xxx.xxx/yy 127.
-</programlisting></para>
-
-<para>
-Do NOT use the <command>bind interfaces only</command> parameter where you
-may wish to
-use the samba password change facility, or where &smbclient; may need to
-access a local service for name resolution or for local resource
-connections. (Note: the <command>bind interfaces only</command> parameter deficiency
-where it will not allow connections to the loopback address will be
-fixed soon).
-</para>
-
-<para>
-Another common cause of these two errors is having something already running
-on port 139, such as Samba (ie: smbd is running from <application>inetd</application> already) or
-something like Digital's Pathworks. Check your <filename>inetd.conf</filename> file before trying
-to start &smbd; as a daemon, it can avoid a lot of frustration!
-</para>
-
-<para>
-And yet another possible cause for failure of this test is when the subnet mask
-and / or broadcast address settings are incorrect. Please check that the
-network interface IP Address / Broadcast Address / Subnet Mask settings are
-correct and that Samba has correctly noted these in the <filename>log.nmb</filename> file.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-Run the command <userinput>nmblookup -B BIGSERVER __SAMBA__</userinput>. You should get the
-IP address of your Samba server back.
-</para>
-
-<para>
-If you don't then nmbd is incorrectly installed. Check your <filename>inetd.conf</filename>
-if you run it from there, or that the daemon is running and listening
-to udp port 137.
-</para>
-
-<para>
-One common problem is that many inetd implementations can't take many
-parameters on the command line. If this is the case then create a
-one-line script that contains the right parameters and run that from
-inetd.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>run the command <userinput>nmblookup -B ACLIENT '*'</userinput></para>
-
-<para>
-You should get the PCs IP address back. If you don't then the client
-software on the PC isn't installed correctly, or isn't started, or you
-got the name of the PC wrong.
-</para>
-
-<para>
-If ACLIENT doesn't resolve via DNS then use the IP address of the
-client in the above test.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-Run the command <userinput>nmblookup -d 2 '*'</userinput>
-</para>
-
-<para>
-This time we are trying the same as the previous test but are trying
-it via a broadcast to the default broadcast address. A number of
-Netbios/TCPIP hosts on the network should respond, although Samba may
-not catch all of the responses in the short time it listens. You
-should see "got a positive name query response" messages from several
-hosts.
-</para>
-
-<para>
-If this doesn't give a similar result to the previous test then
-nmblookup isn't correctly getting your broadcast address through its
-automatic mechanism. In this case you should experiment with the
-<command>interfaces</command> option in &smb.conf; to manually configure your IP
-address, broadcast and netmask.
-</para>
-
-<para>
-If your PC and server aren't on the same subnet then you will need to
-use the <parameter>-B</parameter> option to set the broadcast address to that of the PCs
-subnet.
-</para>
-
-<para>
-This test will probably fail if your subnet mask and broadcast address are
-not correct. (Refer to TEST 3 notes above).
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-Run the command <userinput>smbclient //BIGSERVER/TMP</userinput>. You should
-then be prompted for a password. You should use the password of the account
-you are logged into the unix box with. If you want to test with
-another account then add the <parameter>-U <replaceable>accountname</replaceable></parameter> option to the end of
-the command line. eg:
-<userinput>smbclient //bigserver/tmp -Ujohndoe</userinput>
-</para>
-
-<note><para>
-It is possible to specify the password along with the username
-as follows:
-<userinput>smbclient //bigserver/tmp -Ujohndoe%secret</userinput>
-</para></note>
-
-<para>
-Once you enter the password you should get the <prompt>smb></prompt> prompt. If you
-don't then look at the error message. If it says "invalid network
-name" then the service "tmp" is not correctly setup in your &smb.conf;.
-</para>
-
-<para>
-If it says "bad password" then the likely causes are:
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- you have shadow passords (or some other password system) but didn't
- compile in support for them in &smbd;
- </para>
-</listitem>
-
-<listitem>
- <para>
- your <command>valid users</command> configuration is incorrect
- </para>
-</listitem>
-
-<listitem>
- <para>
- you have a mixed case password and you haven't enabled the <command>password
- level</command> option at a high enough level
- </para>
-</listitem>
-
-<listitem>
- <para>
- the <command>path =</command> line in &smb.conf; is incorrect. Check it with &testparm;
- </para>
-</listitem>
-
-<listitem>
- <para>
- you enabled password encryption but didn't create the SMB encrypted
- password file
- </para>
-</listitem>
-</orderedlist>
-
-<para>
-Once connected you should be able to use the commands
-<command>dir</command> <command>get</command> <command>put</command> etc.
-Type <command>help <replaceable>command</replaceable></command> for instructions. You should
-especially check that the amount of free disk space shown is correct
-when you type <command>dir</command>.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-On the PC, type the command <userinput>net view \\BIGSERVER</userinput>. You will
-need to do this from within a "dos prompt" window. You should get back a
-list of available shares on the server.
-</para>
-
-<para>
-If you get a "network name not found" or similar error then netbios
-name resolution is not working. This is usually caused by a problem in
-nmbd. To overcome it you could do one of the following (you only need
-to choose one of them):
-</para>
-
-<orderedlist>
-<listitem><para>
- fixup the &nmbd; installation
-</para></listitem>
-
-<listitem><para>
- add the IP address of BIGSERVER to the <command>wins server</command> box in the
- advanced tcp/ip setup on the PC.
-</para></listitem>
-
-<listitem><para>
- enable windows name resolution via DNS in the advanced section of
- the tcp/ip setup
-</para></listitem>
-
-<listitem><para>
- add BIGSERVER to your lmhosts file on the PC.
-</para></listitem>
-</orderedlist>
-
-<para>
-If you get a "invalid network name" or "bad password error" then the
-same fixes apply as they did for the <userinput>smbclient -L</userinput> test above. In
-particular, make sure your <command>hosts allow</command> line is correct (see the man
-pages)
-</para>
-
-<para>
-Also, do not overlook that fact that when the workstation requests the
-connection to the samba server it will attempt to connect using the
-name with which you logged onto your Windows machine. You need to make
-sure that an account exists on your Samba server with that exact same
-name and password.
-</para>
-
-<para>
-If you get "specified computer is not receiving requests" or similar
-it probably means that the host is not contactable via tcp services.
-Check to see if the host is running tcp wrappers, and if so add an entry in
-the <filename>hosts.allow</filename> file for your client (or subnet, etc.)
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-Run the command <userinput>net use x: \\BIGSERVER\TMP</userinput>. You should
-be prompted for a password then you should get a "command completed
-successfully" message. If not then your PC software is incorrectly
-installed or your smb.conf is incorrect. make sure your <command>hosts allow</command>
-and other config lines in &smb.conf; are correct.
-</para>
-
-<para>
-It's also possible that the server can't work out what user name to
-connect you as. To see if this is the problem add the line <command>user =
-<replaceable>username</replaceable></command> to the <command>[tmp]</command> section of
-&smb.conf; where <replaceable>username</replaceable> is the
-username corresponding to the password you typed. If you find this
-fixes things you may need the username mapping option.
-</para>
-
-<para>
-It might also be the case that your client only sends encrypted passwords
-and you have <command>encrypt passwords = no</command> in &smb.conf;
-Turn it back on to fix.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
-Run the command <userinput>nmblookup -M <replaceable>testgroup</replaceable></userinput> where
-<replaceable>testgroup</replaceable> is the name of the workgroup that your Samba server and
-Windows PCs belong to. You should get back the IP address of the
-master browser for that workgroup.
-</para>
-
-<para>
-If you don't then the election process has failed. Wait a minute to
-see if it is just being slow then try again. If it still fails after
-that then look at the browsing options you have set in &smb.conf;. Make
-sure you have <command>preferred master = yes</command> to ensure that
-an election is held at startup.
-</para>
-
-</step>
-
-<step performance="required">
-
-<para>
->From file manager try to browse the server. Your samba server should
-appear in the browse list of your local workgroup (or the one you
-specified in smb.conf). You should be able to double click on the name
-of the server and get a list of shares. If you get a "invalid
-password" error when you do then you are probably running WinNT and it
-is refusing to browse a server that has no encrypted password
-capability and is in user level security mode. In this case either set
-<command>security = server</command> AND
-<command>password server = Windows_NT_Machine</command> in your
-&smb.conf; file, or make sure <command>encrypted passwords</command> is
-set to "yes".
-</para>
-
-</step>
-</procedure>
-</sect1>
-
-<sect1>
-<title>Still having troubles?</title>
-
-<para>Read the chapter on
-<link linkend="problems">Analysing and Solving Problems</link>.
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/GROUP-MAPPING-HOWTO.sgml b/docs/docbook/projdoc/GROUP-MAPPING-HOWTO.sgml
deleted file mode 100644
index af6ddff9bf..0000000000
--- a/docs/docbook/projdoc/GROUP-MAPPING-HOWTO.sgml
+++ /dev/null
@@ -1,104 +0,0 @@
-<?xml version="1.0" encoding="iso8859-1"?>
-<chapter id="groupmapping">
-<chapterinfo>
- <author>
- <firstname>Jean François</firstname><surname>Micouleau</surname>
- </author>
- &author.jerry;
-</chapterinfo>
-
-<title>Configuring Group Mapping</title>
-
-<para>
-Starting with Samba 3.0 alpha 2, new group mapping functionality
-is available to create associations between Windows SIDs and UNIX
-groups. The <parameter>groupmap</parameter> subcommand included with
-the <command>net</command> tool can be used to manage these associations.
-</para>
-
-<para>
-The first immediate reason to use the group mapping on a Samba PDC, is that
-the <parameter>domain admin group</parameter> &smb.conf; has been removed.
-This parameter was used to give the listed users membership in the "Domain Admins"
-Windows group which gave local admin rights on their workstations (in
-default configurations).
-</para>
-
-<para>
-When installing NT/W2K on a computer, the installer program creates some users
-and groups. Notably the 'Administrators' group, and gives to that group some
-privileges like the ability to change the date and time or to kill any process
-(or close too) running on the local machine. The 'Administrator' user is a
-member of the 'Administrators' group, and thus 'inherit' the 'Administrators'
-group privileges. If a 'joe' user is created and become a member of the
-'Administrator' group, 'joe' has exactly the same rights as 'Administrator'.
-</para>
-
-<para>
-When a NT/W2K machine is joined to a domain, the "Domain Adminis" group of the
-PDC is added to the local 'Administrators' group of the workstation. Every
-member of the 'Domain Administrators' group 'inherit' the
-rights of the local 'Administrators' group when logging on the workstation.
-</para>
-
-<para>
-The following steps describe how to make samba PDC users members of the
-'Domain Admins' group?
-</para>
-
-<orderedlist>
-<listitem><para>create a unix group (usually in <filename>/etc/group</filename>),
- let's call it domadm</para></listitem>
-<listitem><para>add to this group the users that must be Administrators. For example
- if you want joe,john and mary, your entry in <filename>/etc/group</filename> will
- look like:</para>
-
- <para><programlisting>
- domadm:x:502:joe,john,mary
- </programlisting></para>
-
- </listitem>
-
-<listitem><para>Map this domadm group to the "Domain Admins" group
- by running the command:</para>
-
- <para><prompt>root# </prompt><userinput>net groupmap add ntgroup="Domain Admins" unixgroup=domadm</userinput></para>
-
- <para>The quotes around "Domain Admins" are necessary due to the space in the group name. Also make
- sure to leave no whitespace surrounding the equal character (=).</para>
- </listitem>
-
-</orderedlist>
-
-<para>Now joe, john and mary are domain administrators!</para>
-
-<para>
-It is possible to map any arbitrary UNIX group to any Windows NT
-group as well as making any UNIX group a Windows domain group.
-For example, if you wanted to include a UNIX group (e.g. acct) in a ACL on a
-local file or printer on a domain member machine, you would flag
-that group as a domain group by running the following on the Samba PDC:
-</para>
-
-<para><prompt>root# </prompt><userinput>net groupmap add rid=1000 ntgroup="Accounting" unixgroup=acct</userinput></para>
-
-<para>Be aware that the rid parmeter is a unsigned 32 bit integer that should
-normally start at 1000. However, this rid must not overlap with any RID assigned
-to a user. Verifying this is done differently depending on on the passdb backend
-you are using. Future versions of the tools may perform the verification automatically,
-but for now the burden in on you.</para>
-
-<para>You can list the various groups in the mapping database by executing
-<command>net groupmap list</command>. Here is an example:</para>
-
-<para><programlisting><prompt>root# </prompt>net groupmap list
-System Administrators (S-1-5-21-2547222302-1596225915-2414751004-1002) -> sysadmin
-Domain Admins (S-1-5-21-2547222302-1596225915-2414751004-512) -> domadmin
-Domain Users (S-1-5-21-2547222302-1596225915-2414751004-513) -> domuser
-Domain Guests (S-1-5-21-2547222302-1596225915-2414751004-514) -> domguest
-</programlisting></para>
-
-<para>For complete details on <command>net groupmap</command>, refer to the
-net(8) man page.</para>
-
-</chapter>
diff --git a/docs/docbook/projdoc/Integrating-with-Windows.sgml b/docs/docbook/projdoc/Integrating-with-Windows.sgml
deleted file mode 100644
index 9f0de0a56a..0000000000
--- a/docs/docbook/projdoc/Integrating-with-Windows.sgml
+++ /dev/null
@@ -1,545 +0,0 @@
-<chapter id="integrate-ms-networks">
-
-<chapterinfo>
- &author.jht;
- <pubdate> (Jan 01 2001) </pubdate>
-</chapterinfo>
-
-<title>Integrating MS Windows networks with Samba</title>
-
-<para>
-This section deals with NetBIOS over TCP/IP name to IP address resolution. If
-your MS Windows clients are NOT configured to use NetBIOS over TCP/IP then this
-section does not apply to your installation. If your installation involves use of
-NetBIOS over TCP/IP then this section may help you to resolve networking problems.
-</para>
-
-<note>
-<para>
- NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS
- over Logical Link Control (LLC). On modern networks it is highly advised
- to NOT run NetBEUI at all. Note also that there is NO such thing as
- NetBEUI over TCP/IP - the existence of such a protocol is a complete
- and utter mis-apprehension.
-</para>
-</note>
-
-<para>
-Since the introduction of MS Windows 2000 it is possible to run MS Windows networking
-without the use of NetBIOS over TCP/IP. NetBIOS over TCP/IP uses UDP port 137 for NetBIOS
-name resolution and uses TCP port 139 for NetBIOS session services. When NetBIOS over
-TCP/IP is disabled on MS Windows 2000 and later clients then only TCP port 445 will be
-used and UDP port 137 and TCP port 139 will not.
-</para>
-
-<note>
-<para>
-When using Windows 2000 or later clients, if NetBIOS over TCP/IP is NOT disabled, then
-the client will use UDP port 137 (NetBIOS Name Service, also known as the Windows Internet
-Name Service or WINS), TCP port 139 AND TCP port 445 (for actual file and print traffic).
-</para>
-</note>
-
-<para>
-When NetBIOS over TCP/IP is disabled the use of DNS is essential. Most installations that
-disable NetBIOS over TCP/IP today use MS Active Directory Service (ADS). ADS requires
-Dynamic DNS with Service Resource Records (SRV RR) and with Incremental Zone Transfers (IXFR).
-Use of DHCP with ADS is recommended as a further means of maintaining central control
-over client workstation network configuration.
-</para>
-
-
-<sect1>
-<title>Name Resolution in a pure Unix/Linux world</title>
-
-<para>
-The key configuration files covered in this section are:
-</para>
-
-<itemizedlist>
- <listitem><para><filename>/etc/hosts</filename></para></listitem>
- <listitem><para><filename>/etc/resolv.conf</filename></para></listitem>
- <listitem><para><filename>/etc/host.conf</filename></para></listitem>
- <listitem><para><filename>/etc/nsswitch.conf</filename></para></listitem>
-</itemizedlist>
-
-<sect2>
-<title><filename>/etc/hosts</filename></title>
-
-<para>
-Contains a static list of IP Addresses and names.
-eg:
-</para>
-<para><programlisting>
- 127.0.0.1 localhost localhost.localdomain
- 192.168.1.1 bigbox.caldera.com bigbox alias4box
-</programlisting></para>
-
-<para>
-The purpose of <filename>/etc/hosts</filename> is to provide a
-name resolution mechanism so that uses do not need to remember
-IP addresses.
-</para>
-
-
-<para>
-Network packets that are sent over the physical network transport
-layer communicate not via IP addresses but rather using the Media
-Access Control address, or MAC address. IP Addresses are currently
-32 bits in length and are typically presented as four (4) decimal
-numbers that are separated by a dot (or period). eg: 168.192.1.1
-</para>
-
-<para>
-MAC Addresses use 48 bits (or 6 bytes) and are typically represented
-as two digit hexadecimal numbers separated by colons. eg:
-40:8e:0a:12:34:56
-</para>
-
-<para>
-Every network interfrace must have an MAC address. Associated with
-a MAC address there may be one or more IP addresses. There is NO
-relationship between an IP address and a MAC address, all such assignments
-are arbitary or discretionary in nature. At the most basic level all
-network communications takes place using MAC addressing. Since MAC
-addresses must be globally unique, and generally remains fixed for
-any particular interface, the assignment of an IP address makes sense
-from a network management perspective. More than one IP address can
-be assigned per MAC address. One address must be the primary IP address,
-this is the address that will be returned in the ARP reply.
-</para>
-
-<para>
-When a user or a process wants to communicate with another machine
-the protocol implementation ensures that the "machine name" or "host
-name" is resolved to an IP address in a manner that is controlled
-by the TCP/IP configuration control files. The file
-<filename>/etc/hosts</filename> is one such file.
-</para>
-
-<para>
-When the IP address of the destination interface has been
-determined a protocol called ARP/RARP is used to identify
-the MAC address of the target interface. ARP stands for Address
-Resolution Protocol, and is a broadcast oriented method that
-uses UDP (User Datagram Protocol) to send a request to all
-interfaces on the local network segment using the all 1's MAC
-address. Network interfaces are programmed to respond to two
-MAC addresses only; their own unique address and the address
-ff:ff:ff:ff:ff:ff. The reply packet from an ARP request will
-contain the MAC address and the primary IP address for each
-interface.
-</para>
-
-<para>
-The <filename>/etc/hosts</filename> file is foundational to all
-Unix/Linux TCP/IP installations and as a minumum will contain
-the localhost and local network interface IP addresses and the
-primary names by which they are known within the local machine.
-This file helps to prime the pump so that a basic level of name
-resolution can exist before any other method of name resolution
-becomes available.
-</para>
-
-</sect2>
-
-
-<sect2>
-<title><filename>/etc/resolv.conf</filename></title>
-
-<para>
-This file tells the name resolution libraries:
-</para>
-
-<itemizedlist>
- <listitem><para>The name of the domain to which the machine
- belongs
- </para></listitem>
-
- <listitem><para>The name(s) of any domains that should be
- automatically searched when trying to resolve unqualified
- host names to their IP address
- </para></listitem>
-
- <listitem><para>The name or IP address of available Domain
- Name Servers that may be asked to perform name to address
- translation lookups
- </para></listitem>
-</itemizedlist>
-
-</sect2>
-
-
-<sect2>
-<title><filename>/etc/host.conf</filename></title>
-
-
-<para>
-<filename>/etc/host.conf</filename> is the primary means by
-which the setting in /etc/resolv.conf may be affected. It is a
-critical configuration file. This file controls the order by
-which name resolution may procede. The typical structure is:
-</para>
-
-<para><programlisting>
- order hosts,bind
- multi on
-</programlisting></para>
-
-<para>
-then both addresses should be returned. Please refer to the
-man page for host.conf for further details.
-</para>
-
-
-</sect2>
-
-
-
-<sect2>
-<title><filename>/etc/nsswitch.conf</filename></title>
-
-<para>
-This file controls the actual name resolution targets. The
-file typically has resolver object specifications as follows:
-</para>
-
-
-<para><programlisting>
- # /etc/nsswitch.conf
- #
- # Name Service Switch configuration file.
- #
-
- passwd: compat
- # Alternative entries for password authentication are:
- # passwd: compat files nis ldap winbind
- shadow: compat
- group: compat
-
- hosts: files nis dns
- # Alternative entries for host name resolution are:
- # hosts: files dns nis nis+ hesoid db compat ldap wins
- networks: nis files dns
-
- ethers: nis files
- protocols: nis files
- rpc: nis files
- services: nis files
-</programlisting></para>
-
-<para>
-Of course, each of these mechanisms requires that the appropriate
-facilities and/or services are correctly configured.
-</para>
-
-<para>
-It should be noted that unless a network request/message must be
-sent, TCP/IP networks are silent. All TCP/IP communications assumes a
-principal of speaking only when necessary.
-</para>
-
-<para>
-Starting with version 2.2.0 samba has Linux support for extensions to
-the name service switch infrastructure so that linux clients will
-be able to obtain resolution of MS Windows NetBIOS names to IP
-Addresses. To gain this functionality Samba needs to be compiled
-with appropriate arguments to the make command (ie: <command>make
-nsswitch/libnss_wins.so</command>). The resulting library should
-then be installed in the <filename>/lib</filename> directory and
-the "wins" parameter needs to be added to the "hosts:" line in
-the <filename>/etc/nsswitch.conf</filename> file. At this point it
-will be possible to ping any MS Windows machine by it's NetBIOS
-machine name, so long as that machine is within the workgroup to
-which both the samba machine and the MS Windows machine belong.
-</para>
-
-</sect2>
-</sect1>
-
-
-<sect1>
-<title>Name resolution as used within MS Windows networking</title>
-
-<para>
-MS Windows networking is predicated about the name each machine
-is given. This name is known variously (and inconsistently) as
-the "computer name", "machine name", "networking name", "netbios name",
-"SMB name". All terms mean the same thing with the exception of
-"netbios name" which can apply also to the name of the workgroup or the
-domain name. The terms "workgroup" and "domain" are really just a
-simply name with which the machine is associated. All NetBIOS names
-are exactly 16 characters in length. The 16th character is reserved.
-It is used to store a one byte value that indicates service level
-information for the NetBIOS name that is registered. A NetBIOS machine
-name is therefore registered for each service type that is provided by
-the client/server.
-</para>
-
-<para>
-The following are typical NetBIOS name/service type registrations:
-</para>
-
-<para><programlisting>
- Unique NetBIOS Names:
- MACHINENAME&lt;00&gt; = Server Service is running on MACHINENAME
- MACHINENAME&lt;03&gt; = Generic Machine Name (NetBIOS name)
- MACHINENAME&lt;20&gt; = LanMan Server service is running on MACHINENAME
- WORKGROUP&lt;1b&gt; = Domain Master Browser
-
- Group Names:
- WORKGROUP&lt;03&gt; = Generic Name registered by all members of WORKGROUP
- WORKGROUP&lt;1c&gt; = Domain Controllers / Netlogon Servers
- WORKGROUP&lt;1d&gt; = Local Master Browsers
- WORKGROUP&lt;1e&gt; = Internet Name Resolvers
-</programlisting></para>
-
-<para>
-It should be noted that all NetBIOS machines register their own
-names as per the above. This is in vast contrast to TCP/IP
-installations where traditionally the system administrator will
-determine in the /etc/hosts or in the DNS database what names
-are associated with each IP address.
-</para>
-
-<para>
-One further point of clarification should be noted, the <filename>/etc/hosts</filename>
-file and the DNS records do not provide the NetBIOS name type information
-that MS Windows clients depend on to locate the type of service that may
-be needed. An example of this is what happens when an MS Windows client
-wants to locate a domain logon server. It finds this service and the IP
-address of a server that provides it by performing a lookup (via a
-NetBIOS broadcast) for enumeration of all machines that have
-registered the name type *&lt;1c&gt;. A logon request is then sent to each
-IP address that is returned in the enumerated list of IP addresses. Which
-ever machine first replies then ends up providing the logon services.
-</para>
-
-<para>
-The name "workgroup" or "domain" really can be confusing since these
-have the added significance of indicating what is the security
-architecture of the MS Windows network. The term "workgroup" indicates
-that the primary nature of the network environment is that of a
-peer-to-peer design. In a WORKGROUP all machines are responsible for
-their own security, and generally such security is limited to use of
-just a password (known as SHARE MODE security). In most situations
-with peer-to-peer networking the users who control their own machines
-will simply opt to have no security at all. It is possible to have
-USER MODE security in a WORKGROUP environment, thus requiring use
-of a user name and a matching password.
-</para>
-
-<para>
-MS Windows networking is thus predetermined to use machine names
-for all local and remote machine message passing. The protocol used is
-called Server Message Block (SMB) and this is implemented using
-the NetBIOS protocol (Network Basic Input Output System). NetBIOS can
-be encapsulated using LLC (Logical Link Control) protocol - in which case
-the resulting protocol is called NetBEUI (Network Basic Extended User
-Interface). NetBIOS can also be run over IPX (Internetworking Packet
-Exchange) protocol as used by Novell NetWare, and it can be run
-over TCP/IP protocols - in which case the resulting protocol is called
-NBT or NetBT, the NetBIOS over TCP/IP.
-</para>
-
-<para>
-MS Windows machines use a complex array of name resolution mechanisms.
-Since we are primarily concerned with TCP/IP this demonstration is
-limited to this area.
-</para>
-
-<sect2>
-<title>The NetBIOS Name Cache</title>
-
-<para>
-All MS Windows machines employ an in memory buffer in which is
-stored the NetBIOS names and IP addresses for all external
-machines that that machine has communicated with over the
-past 10-15 minutes. It is more efficient to obtain an IP address
-for a machine from the local cache than it is to go through all the
-configured name resolution mechanisms.
-</para>
-
-<para>
-If a machine whose name is in the local name cache has been shut
-down before the name had been expired and flushed from the cache, then
-an attempt to exchange a message with that machine will be subject
-to time-out delays. i.e.: Its name is in the cache, so a name resolution
-lookup will succeed, but the machine can not respond. This can be
-frustrating for users - but it is a characteristic of the protocol.
-</para>
-
-<para>
-The MS Windows utility that allows examination of the NetBIOS
-name cache is called "nbtstat". The Samba equivalent of this
-is called "nmblookup".
-</para>
-
-</sect2>
-
-<sect2>
-<title>The LMHOSTS file</title>
-
-<para>
-This file is usually located in MS Windows NT 4.0 or
-2000 in <filename>C:\WINNT\SYSTEM32\DRIVERS\ETC</filename> and contains
-the IP Address and the machine name in matched pairs. The
-<filename>LMHOSTS</filename> file performs NetBIOS name
-to IP address mapping.
-</para>
-
-<para>
-It typically looks like:
-</para>
-
-<para><programlisting>
- # Copyright (c) 1998 Microsoft Corp.
- #
- # This is a sample LMHOSTS file used by the Microsoft Wins Client (NetBIOS
- # over TCP/IP) stack for Windows98
- #
- # This file contains the mappings of IP addresses to NT computernames
- # (NetBIOS) names. Each entry should be kept on an individual line.
- # The IP address should be placed in the first column followed by the
- # corresponding computername. The address and the comptername
- # should be separated by at least one space or tab. The "#" character
- # is generally used to denote the start of a comment (see the exceptions
- # below).
- #
- # This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
- # files and offers the following extensions:
- #
- # #PRE
- # #DOM:&lt;domain&gt;
- # #INCLUDE &lt;filename&gt;
- # #BEGIN_ALTERNATE
- # #END_ALTERNATE
- # \0xnn (non-printing character support)
- #
- # Following any entry in the file with the characters "#PRE" will cause
- # the entry to be preloaded into the name cache. By default, entries are
- # not preloaded, but are parsed only after dynamic name resolution fails.
- #
- # Following an entry with the "#DOM:&lt;domain&gt;" tag will associate the
- # entry with the domain specified by &lt;domain&gt;. This affects how the
- # browser and logon services behave in TCP/IP environments. To preload
- # the host name associated with #DOM entry, it is necessary to also add a
- # #PRE to the line. The &lt;domain&gt; is always preloaded although it will not
- # be shown when the name cache is viewed.
- #
- # Specifying "#INCLUDE &lt;filename&gt;" will force the RFC NetBIOS (NBT)
- # software to seek the specified &lt;filename&gt; and parse it as if it were
- # local. &lt;filename&gt; is generally a UNC-based name, allowing a
- # centralized lmhosts file to be maintained on a server.
- # It is ALWAYS necessary to provide a mapping for the IP address of the
- # server prior to the #INCLUDE. This mapping must use the #PRE directive.
- # In addtion the share "public" in the example below must be in the
- # LanManServer list of "NullSessionShares" in order for client machines to
- # be able to read the lmhosts file successfully. This key is under
- # \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
- # in the registry. Simply add "public" to the list found there.
- #
- # The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
- # statements to be grouped together. Any single successful include
- # will cause the group to succeed.
- #
- # Finally, non-printing characters can be embedded in mappings by
- # first surrounding the NetBIOS name in quotations, then using the
- # \0xnn notation to specify a hex value for a non-printing character.
- #
- # The following example illustrates all of these extensions:
- #
- # 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
- # 102.54.94.102 "appname \0x14" #special app server
- # 102.54.94.123 popular #PRE #source server
- # 102.54.94.117 localsrv #PRE #needed for the include
- #
- # #BEGIN_ALTERNATE
- # #INCLUDE \\localsrv\public\lmhosts
- # #INCLUDE \\rhino\public\lmhosts
- # #END_ALTERNATE
- #
- # In the above example, the "appname" server contains a special
- # character in its name, the "popular" and "localsrv" server names are
- # preloaded, and the "rhino" server name is specified so it can be used
- # to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
- # system is unavailable.
- #
- # Note that the whole file is parsed including comments on each lookup,
- # so keeping the number of comments to a minimum will improve performance.
- # Therefore it is not advisable to simply add lmhosts file entries onto the
- # end of this file.
-</programlisting></para>
-
-</sect2>
-
-<sect2>
-<title>HOSTS file</title>
-
-<para>
-This file is usually located in MS Windows NT 4.0 or 2000 in
-<filename>C:\WINNT\SYSTEM32\DRIVERS\ETC</filename> and contains
-the IP Address and the IP hostname in matched pairs. It can be
-used by the name resolution infrastructure in MS Windows, depending
-on how the TCP/IP environment is configured. This file is in
-every way the equivalent of the Unix/Linux <filename>/etc/hosts</filename> file.
-</para>
-</sect2>
-
-
-<sect2>
-<title>DNS Lookup</title>
-
-<para>
-This capability is configured in the TCP/IP setup area in the network
-configuration facility. If enabled an elaborate name resolution sequence
-is followed the precise nature of which is dependant on what the NetBIOS
-Node Type parameter is configured to. A Node Type of 0 means use
-NetBIOS broadcast (over UDP broadcast) is first used if the name
-that is the subject of a name lookup is not found in the NetBIOS name
-cache. If that fails then DNS, HOSTS and LMHOSTS are checked. If set to
-Node Type 8, then a NetBIOS Unicast (over UDP Unicast) is sent to the
-WINS Server to obtain a lookup before DNS, HOSTS, LMHOSTS, or broadcast
-lookup is used.
-</para>
-
-</sect2>
-
-<sect2>
-<title>WINS Lookup</title>
-
-<para>
-A WINS (Windows Internet Name Server) service is the equivaent of the
-rfc1001/1002 specified NBNS (NetBIOS Name Server). A WINS server stores
-the names and IP addresses that are registered by a Windows client
-if the TCP/IP setup has been given at least one WINS Server IP Address.
-</para>
-
-<para>
-To configure Samba to be a WINS server the following parameter needs
-to be added to the &smb.conf; file:
-</para>
-
-<para><programlisting>
- wins support = Yes
-</programlisting></para>
-
-<para>
-To configure Samba to use a WINS server the following parameters are
-needed in the &smb.conf; file:
-</para>
-
-<para><programlisting>
- wins support = No
- wins server = xxx.xxx.xxx.xxx
-</programlisting></para>
-
-<para>
-where <replaceable>xxx.xxx.xxx.xxx</replaceable> is the IP address
-of the WINS server.
-</para>
-
-</sect2>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/InterdomainTrusts.sgml b/docs/docbook/projdoc/InterdomainTrusts.sgml
deleted file mode 100644
index 2c492d4ac0..0000000000
--- a/docs/docbook/projdoc/InterdomainTrusts.sgml
+++ /dev/null
@@ -1,222 +0,0 @@
-<chapter id="InterdomainTrusts">
-<chapterinfo>
- &author.jht;
- &author.mimir;
- <pubdate>April 3, 2003</pubdate>
-</chapterinfo>
-
-<title>Interdomain Trust Relationships</title>
-
-<para>
-Samba-3 supports NT4 style domain trust relationships. This is feature that many sites
-will want to use if they migrate to Samba-3 from and NT4 style domain and do NOT want to
-adopt Active Directory or an LDAP based authentication back end. This section explains
-some background information regarding trust relationships and how to create them. It is now
-possible for Samba-3 to NT4 trust (and vice versa), as well as Samba3 to Samba3 trusts.
-</para>
-
-<sect1>
-<title>Trust Relationship Background</title>
-
-<para>
-MS Windows NT3.x/4.0 type security domains employ a non-hierarchical security structure.
-The limitations of this architecture as it affects the scalability of MS Windows networking
-in large organisations is well known. Additionally, the flat-name space that results from
-this design significantly impacts the delegation of administrative responsibilities in
-large and diverse organisations.
-</para>
-
-<para>
-Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means
-of circumventing the limitations of the older technologies. Not every organisation is ready
-or willing to embrace ADS. For small companies the older NT4 style domain security paradigm
-is quite adequate, there thus remains an entrenched user base for whom there is no direct
-desire to go through a disruptive change to adopt ADS.
-</para>
-
-<para>
-Microsoft introduced with MS Windows NT the ability to allow differing security domains
-to affect a mechanism so that users from one domain may be given access rights and privileges
-in another domain. The language that describes this capability is couched in terms of
-<emphasis>Trusts</emphasis>. Specifically, one domain will <emphasis>trust</emphasis> the users
-from another domain. The domain from which users are available to another security domain is
-said to be a trusted domain. The domain in which those users have assigned rights and privileges
-is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only,
-thus if users in both domains are to have privileges and rights in each others' domain, then it is
-necessary to establish two (2) relationships, one in each direction.
-</para>
-
-<para>
-In an NT4 style MS security domain, all trusts are non-transitive. This means that if there
-are three (3) domains (let's call them RED, WHITE, and BLUE) where RED and WHITE have a trust
-relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no
-implied trust between the RED and BLUE domains. ie: Relationships are explicit and not
-transitive.
-</para>
-
-<para>
-New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way
-by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE
-domains above, with Windows 2000 and ADS the RED and BLUE domains CAN trust each other. This is
-an inherent feature of ADS domains. Samba-3 implements MS Windows NT4
-style Interdomain trusts and interoperates with MS Windows 200x ADS
-security domains in similar manner to MS Windows NT4 style domains.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Native MS Windows NT4 Trusts Configuration</title>
-
-<para>
-There are two steps to creating an interdomain trust relationship.
-</para>
-
-<sect2>
-<title>NT4 as the Trusting Domain (ie. creating the trusted account)</title>
-
-<para>
-For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager.
-To affect a two way trust relationship it is necessary for each domain administrator to make
-available (for use by an external domain) it's security resources. This is done from the Domain
-User Manager Policies entry on the menu bar. From the Policy menu, select Trust Relationships, then
-next to the lower box that is labelled "Permitted to Trust this Domain" are two buttons, "Add" and
-"Remove". The "Add" button will open a panel in which needs to be entered the remote domain that
-will be able to assign user rights to your domain. In addition it is necessary to enter a password
-that is specific to this trust relationship. The password needs to be
-typed twice (for standard confirmation).
-</para>
-
-</sect2>
-
-<sect2>
-<title>NT4 as the Trusted Domain (ie. creating trusted account's password)</title>
-
-<para>
-A trust relationship will work only when the other (trusting) domain makes the appropriate connections
-with the trusted domain. To consumate the trust relationship the administrator will launch the
-Domain User Manager, from the menu select Policies, then select Trust Relationships, then click on the
-"Add" button that is next to the box that is labelled "Trusted Domains". A panel will open in
-which must be entered the name of the remote domain as well as the password assigned to that trust.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Configuring Samba NT-style Domain Trusts</title>
-
-<para>
-This description is meant to be a fairly short introduction about how to set up a Samba server so
-that it could participate in interdomain trust relationships. Trust relationship support in Samba
-is in its early stage, so lot of things don't work yet.
-</para>
-
-<para>
-Each of the procedures described below is treated as they were performed with Windows NT4 Server on
-one end. The remote end could just as well be another Samba-3 domain. It can be clearly seen, after
-reading this document, that combining Samba-specific parts of what's written below leads to trust
-between domains in purely Samba environment.
-</para>
-
-<sect2>
-<title>Samba-3 as the Trusting Domain</title>
-
-<para>
-In order to set the Samba PDC to be the trusted party of the relationship first you need
-to create special account for the domain that will be the trusting party. To do that,
-you can use the 'smbpasswd' utility. Creating the trusted domain account is very
-similiar to creating a trusted machine account. Suppose, your domain is
-called SAMBA, and the remote domain is called RUMBA. The first step
-will be to issue this command from your favourite shell:
-</para>
-
-<para>
-<screen>
-<prompt>deity#</prompt> <userinput>smbpasswd -a -i rumba</userinput>
- New SMB password: XXXXXXXX
- Retype SMB password: XXXXXXXX
- Added user rumba$
-</screen>
-
-where <parameter>-a</parameter> means to add a new account into the
-passdb database and <parameter>-i</parameter> means: ''create this
-account with the InterDomain trust flag''
-</para>
-
-<para>
-The account name will be 'rumba$' (the name of the remote domain)
-</para>
-
-<para>
-After issuing this command you'll be asked to enter the password for
-the account. You can use any password you want, but be aware that Windows NT will
-not change this password until 7 days following account creation.
-After the command returns successfully, you can look at the entry for the new account
-(in the stardard way depending on your configuration) and see that account's name is
-really RUMBA$ and it has 'I' flag in the flags field. Now you're ready to confirm
-the trust by establishing it from Windows NT Server.
-</para>
-
-<para>
-Open 'User Manager for Domains' and from menu 'Policies' select 'Trust Relationships...'.
-Right beside 'Trusted domains' list box press 'Add...' button. You will be prompted for
-the trusted domain name and the relationship password. Type in SAMBA, as this is
-your domain name, and the password used at the time of account creation.
-Press OK and, if everything went without incident, you will see 'Trusted domain relationship
-successfully established' message.
-</para>
-
-</sect2>
-<sect2>
-<title>Samba-3 as the Trusted Domain</title>
-
-<para>
-This time activities are somewhat reversed. Again, we'll assume that your domain
-controlled by the Samba PDC is called SAMBA and NT-controlled domain is called RUMBA.
-</para>
-
-<para>
-The very first thing requirement is to add an account for the SAMBA domain on RUMBA's PDC.
-</para>
-
-<para>
-Launch the Domain User Manager, then from the menu select 'Policies', 'Trust Relationships'.
-Now, next to 'Trusted Domains' box press the 'Add' button, and type in the name of the trusted
-domain (SAMBA) and password securing the relationship.
-</para>
-
-<para>
-The password can be arbitrarily chosen. It is easy to change the password
-from the Samba server whenever you want. After confirming the password your account is
-ready for use. Now it's Samba's turn.
-</para>
-
-<para>
-Using your favourite shell while being logged in as root, issue this command:
-</para>
-
-<para>
-<prompt>deity# </prompt><userinput>net rpc trustdom establish rumba</userinput>
-</para>
-
-<para>
-You will be prompted for the password you just typed on your Windows NT4 Server box.
-Do not worry if you see an error message that mentions a returned code of
-<errorname>NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT</errorname>. It means the
-password you gave is correct and the NT4 Server says the account is
-ready for interdomain connection and not for ordinary
-connection. After that, be patient it can take a while (especially
-in large networks), you should see the 'Success' message. Congratulations! Your trust
-relationship has just been established.
-</para>
-
-<note><para>
-Note that you have to run this command as root because you must have write access to
-the <filename>secrets.tdb</filename> file.
-</para></note>
-
-</sect2>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/IntroSMB.sgml b/docs/docbook/projdoc/IntroSMB.sgml
deleted file mode 100644
index 32b18cc8fc..0000000000
--- a/docs/docbook/projdoc/IntroSMB.sgml
+++ /dev/null
@@ -1,361 +0,0 @@
-<chapter id="IntroSMB">
-<chapterinfo>
- &author.dlechnyr;
- <pubdate>April 14, 2003</pubdate>
-</chapterinfo>
-
-<title>Introduction to Samba</title>
-
-<para><emphasis>
-"If you understand what you're doing, you're not learning anything."
--- Anonymous
-</emphasis></para>
-
-<para>
-Samba is a file and print server for Windows-based clients using TCP/IP as the underlying
-transport protocol. In fact, it can support any SMB/CIFS-enabled client. One of Samba's big
-strengths is that you can use it to blend your mix of Windows and Linux machines together
-without requiring a separate Windows NT/2000/2003 Server. Samba is actively being developed
-by a global team of about 30 active programmers and was originally developed by Andrew Tridgell.
-</para>
-
-<sect1>
-<title>Background</title>
-
-<para>
-Once long ago, there was a buzzword referred to as DCE/RPC. This stood for Distributed
-Computing Environment/Remote Procedure Calls and conceptually was a good idea. It was
-originally developed by Apollo/HP as NCA 1.0 (Network Computing Architecture) and only
-ran over UDP. When there was a need to run it over TCP so that it would be compatible
-with DECnet 3.0, it was redesigned, submitted to The Open Group, and officially became
-known as DCE/RPC. Microsoft came along and decided, rather than pay $20 per seat to
-license this technology, to reimplement DCE/RPC themselves as MSRPC. From this, the
-concept continued in the form of SMB (Server Message Block, or the "what") using the
-NetBIOS (Network Basic Input/Output System, or the "how") compatibility layer. You can
-run SMB (i.e., transport) over several different protocols; many different implementations
-arose as a result, including NBIPX (NetBIOS over IPX, NwLnkNb, or NWNBLink) and NBT
-(NetBIOS over TCP/IP, or NetBT). As the years passed, NBT became the most common form
-of implementation until the advance of "Direct-Hosted TCP" -- the Microsoft marketing
-term for eliminating NetBIOS entirely and running SMB by itself across TCP port 445
-only. As of yet, direct-hosted TCP has yet to catch on.
-</para>
-
-<para>
-Perhaps the best summary of the origins of SMB are voiced in the 1997 article titled, CIFS:
-Common Insecurities Fail Scrutiny:
-</para>
-
-<para><emphasis>
-Several megabytes of NT-security archives, random whitepapers, RFCs, the CIFS spec, the Samba
-stuff, a few MS knowledge-base articles, strings extracted from binaries, and packet dumps have
-been dutifully waded through during the information-gathering stages of this project, and there
-are *still* many missing pieces... While often tedious, at least the way has been generously
-littered with occurrences of clapping hand to forehead and muttering 'crikey, what are they
-thinking?
-</emphasis></para>
-
-</sect1>
-
-<sect1>
-<title>Terminology</title>
-
-<itemizedlist>
-
- <listitem><para>
- SMB: Acronym for "Server Message Block". This is Microsoft's file and printer sharing protocol.
- </para></listitem>
-
- <listitem><para>
- CIFS: Acronym for "Common Internet File System". Around 1996, Microsoft apparently
- decided that SMB needed the word "Internet" in it, so they changed it to CIFS.
- </para></listitem>
-
- <listitem><para>
- Direct-Hosted: A method of providing file/printer sharing services over port 445/tcp
- only using DNS for name resolution instead of WINS.
- </para></listitem>
-
- <listitem><para>
- IPC: Acronym for "Inter-Process Communication". A method to communicate specific
- information between programs.
- </para></listitem>
-
- <listitem><para>
- Marshalling: - A method of serializing (i.e., sequential ordering of) variable data
- suitable for transmission via a network connection or storing in a file. The source
- data can be re-created using a similar process called unmarshalling.
- </para></listitem>
-
- <listitem><para>
- NetBIOS: Acronym for "Network Basic Input/Output System". This is not a protocol;
- it is a method of communication across an existing protocol. This is a standard which
- was originally developed for IBM by Sytek in 1983. To exaggerate the analogy a bit,
- it can help to think of this in comparison your computer's BIOS -- it controls the
- essential functions of your input/output hardware -- whereas NetBIOS controls the
- essential functions of your input/output traffic via the network. Again, this is a bit
- of an exaggeration but it should help that paradigm shift. What is important to realize
- is that NetBIOS is a transport standard, not a protocol. Unfortunately, even technically
- brilliant people tend to interchange NetBIOS with terms like NetBEUI without a second
- thought; this will cause no end (and no doubt) of confusion.
- </para></listitem>
-
- <listitem><para>
- NetBEUI: Acronym for the "NetBIOS Extended User Interface". Unlike NetBIOS, NetBEUI
- is a protocol, not a standard. It is also not routable, so traffic on one side of a
- router will be unable to communicate with the other side. Understanding NetBEUI is
- not essential to deciphering SMB; however it helps to point out that it is not the
- same as NetBIOS and to improve your score in trivia at parties. NetBEUI was originally
- referred to by Microsoft as "NBF", or "The Windows NT NetBEUI Frame protocol driver".
- It is not often heard from these days.
- </para></listitem>
-
- <listitem><para>
- NBT: Acronym for "NetBIOS over TCP"; also known as "NetBT". Allows the continued use
- of NetBIOS traffic proxied over TCP/IP. As a result, NetBIOS names are made
- to IP addresses and NetBIOS name types are conceptually equivalent to TCP/IP ports.
- This is how file and printer sharing are accomplished in Windows 95/98/ME. They
- traditionally rely on three ports: NetBIOS Name Service (nbname) via UDP port 137,
- NetBIOS Datagram Service (nbdatagram) via UDP port 138, and NetBIOS Session Service
- (nbsession) via TCP port 139. All name resolution is done via WINS, NetBIOS broadcasts,
- and DNS. NetBIOS over TCP is documented in RFC 1001 (Concepts and methods) and RFC 1002
- (Detailed specifications).
- </para></listitem>
-
- <listitem><para>
- W2K: Acronym for Windows 2000 Professional or Server
- </para></listitem>
-
- <listitem><para>
- W3K: Acronym for Windows 2003 Server
- </para></listitem>
-
-</itemizedlist>
-
-<para>If you plan on getting help, make sure to subscribe to the Samba Mailing List (available at
-http://www.samba.org). Optionally, you could just search mailing.unix.samba at http://groups.google.com
-</para>
-
-</sect1>
-
-<sect1>
-<title>Related Projects</title>
-
-<para>
-There are currently two network filesystem client projects for Linux that are directly
-related to Samba: SMBFS and CIFS VFS. These are both available in the Linux kernel itself.
-</para>
-
-<itemizedlist>
-
- <listitem><para>
- SMBFS (Server Message Block File System) allows you to mount SMB shares (the protocol
- that Microsoft Windows and OS/2 Lan Manager use to share files and printers
- over local networks) and access them just like any other Unix directory. This is useful
- if you just want to mount such filesystems without being a SMBFS server.
- </para></listitem>
-
- <listitem><para>
- CIFS VFS (Common Internet File System Virtual File System) is the successor to SMBFS, and
- is being actively developed for the upcoming version of the Linux kernel. The intent of this module
- is to provide advanced network file system functionality including support for dfs (heirarchical
- name space), secure per-user session establishment, safe distributed caching (oplock),
- optional packet signing, Unicode and other internationalization improvements, and optional
- Winbind (nsswitch) integration.
- </para></listitem>
-
-</itemizedlist>
-
-<para>
-Again, it's important to note that these are implementations for client filesystems, and have
-nothing to do with acting as a file and print server for SMB/CIFS clients.
-</para>
-
-<para>
-There are other Open Source CIFS client implementations, such as the jCIFS project
-(jcifs.samba.org) which provides an SMB client toolkit written in Java.
-</para>
-
-
-</sect1>
-
-
-<sect1>
-<title>SMB Methodology</title>
-
-<para>
-Traditionally, SMB uses UDP port 137 (NetBIOS name service, or netbios-ns),
-UDP port 138 (NetBIOS datagram service, or netbios-dgm), and TCP port 139 (NetBIOS
-session service, or netbios-ssn). Anyone looking at their network with a good
-packet sniffer will be amazed at the amount of traffic generated by just opening
-up a single file. In general, SMB sessions are established in the following order:
-</para>
-
-<itemizedlist>
- <listitem><para>
- "TCP Connection" - establish 3-way handshake (connection) to port 139/tcp
- or 445/tcp.
- </para></listitem>
-
- <listitem><para>
- "NetBIOS Session Request" - using the following "Calling Names": The local
- machine's NetBIOS name plus the 16th character 0x00; The server's NetBIOS
- name plus the 16th character 0x20
- </para></listitem>
-
- <listitem><para>
- "SMB Negotiate Protocol" - determine the protocol dialect to use, which will
- be one of the following: PC Network Program 1.0 (Core) - share level security
- mode only; Microsoft Networks 1.03 (Core Plus) - share level security
- mode only; Lanman1.0 (LAN Manager 1.0) - uses Challenge/Response
- Authentication; Lanman2.1 (LAN Manager 2.1) - uses Challenge/Response
- Authentication; NT LM 0.12 (NT LM 0.12) - uses Challenge/Response
- Authentication
- </para></listitem>
-
- <listitem><para>
- SMB Session Startup. Passwords are encrypted (or not) according to one of
- the following methods: Null (no encryption); Cleartext (no encryption); LM
- and NTLM; NTLM; NTLMv2
- </para></listitem>
-
- <listitem><para>
- SMB Tree Connect: Connect to a share name (e.g., \\servername\share); Connect
- to a service type (e.g., IPC$ named pipe)
- </para></listitem>
-
-</itemizedlist>
-
-<para>
-A good way to examine this process in depth is to try out SecurityFriday's SWB program
-at http://www.securityfriday.com/ToolDownload/SWB/swb_doc.html. It allows you to
-walk through the establishment of a SMB/CIFS session step by step.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Additional Resources</title>
-
-<itemizedlist>
-
- <listitem><para>
- <emphasis>CIFS: Common Insecurities Fail Scrutiny</emphasis> by "Hobbit",
- http://hr.uoregon.edu/davidrl/cifs.txt
- </para></listitem>
-
- <listitem><para>
- <emphasis>Doing the Samba on Windows</emphasis> by Financial Review,
- http://afr.com/it/2002/10/01/FFXDF43AP6D.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>Implementing CIFS</emphasis> by Christopher R. Hertel,
- http://ubiqx.org/cifs/
- </para></listitem>
-
- <listitem><para>
- <emphasis>Just What Is SMB?</emphasis> by Richard Sharpe,
- http://samba.anu.edu.au/cifs/docs/what-is-smb.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>Opening Windows Everywhere</emphasis> by Mike Warfield,
- http://www.linux-mag.com/1999-05/samba_01.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>SMB HOWTO</emphasis> by David Wood,
- http://www.tldp.org/HOWTO/SMB-HOWTO.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>SMB/CIFS by The Root</emphasis> by "ledin",
- http://www.phrack.org/phrack/60/p60-0x0b.txt
- </para></listitem>
-
- <listitem><para>
- <emphasis>The Story of Samba</emphasis> by Christopher R. Hertel,
- http://www.linux-mag.com/1999-09/samba_01.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>The Unofficial Samba HOWTO</emphasis> by David Lechnyr,
- http://hr.uoregon.edu/davidrl/samba/
- </para></listitem>
-
- <listitem><para>
- <emphasis>Understanding the Network Neighborhood</emphasis> by Christopher R. Hertel,
- http://www.linux-mag.com/2001-05/smb_01.html
- </para></listitem>
-
- <listitem><para>
- <emphasis>Using Samba as a PDC</emphasis> by Andrew Bartlett,
- http://www.linux-mag.com/2002-02/samba_01.html
- </para></listitem>
-
-</itemizedlist>
-
-</sect1>
-
-<sect1>
-<title>Epilogue</title>
-
-<para><emphasis>
-"What's fundamentally wrong is that nobody ever had any taste when they
-did it. Microsoft has been very much into making the user interface look good,
-but internally it's just a complete mess. And even people who program for Microsoft
-and who have had years of experience, just don't know how it works internally.
-Worse, nobody dares change it. Nobody dares to fix bugs because it's such a
-mess that fixing one bug might just break a hundred programs that depend on
-that bug. And Microsoft isn't interested in anyone fixing bugs -- they're interested
-in making money. They don't have anybody who takes pride in Windows 95 as an
-operating system.
-</emphasis></para>
-
-<para><emphasis>
-People inside Microsoft know it's a bad operating system and they still
-continue obviously working on it because they want to get the next version out
-because they want to have all these new features to sell more copies of the
-system.
-</emphasis></para>
-
-<para><emphasis>
-The problem with that is that over time, when you have this kind of approach,
-and because nobody understands it, because nobody REALLY fixes bugs (other than
-when they're really obvious), the end result is really messy. You can't trust
-it because under certain circumstances it just spontaneously reboots or just
-halts in the middle of something that shouldn't be strange. Normally it works
-fine and then once in a blue moon for some completely unknown reason, it's dead,
-and nobody knows why. Not Microsoft, not the experienced user and certainly
-not the completely clueless user who probably sits there shivering thinking
-"What did I do wrong?" when they didn't do anything wrong at all.
-</emphasis></para>
-
-<para><emphasis>
-That's what's really irritating to me."
-</emphasis></para>
-
-<para>
--- Linus Torvalds, from an interview with BOOT Magazine, Sept 1998
-(http://hr.uoregon.edu/davidrl/boot.txt)
-</para>
-
-</sect1>
-
-<sect1>
-<title>Miscellaneous</title>
-
-<para>
-This chapter was lovingly handcrafted on a Dell Latitude C400 laptop running Slackware Linux 9.0,
-in case anyone asks.
-</para>
-
-<para>
-This chapter is Copyright &copy; 2003 David Lechnyr (david at lechnyr dot com).
-Permission is granted to copy, distribute and/or modify this document under the terms
-of the GNU Free Documentation License, Version 1.2 or any later version published by the Free
-Software Foundation. A copy of the license is available at http://www.gnu.org/licenses/fdl.txt.
-</para>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/NT4Migration.sgml b/docs/docbook/projdoc/NT4Migration.sgml
deleted file mode 100644
index 733d1f75ae..0000000000
--- a/docs/docbook/projdoc/NT4Migration.sgml
+++ /dev/null
@@ -1,507 +0,0 @@
-<chapter id="NT4Migration">
-<chapterinfo>
- &author.jht;
- <pubdate>April 3, 2003</pubdate>
-</chapterinfo>
-
-<title>Migration from NT4 PDC to Samba-3 PDC</title>
-
-<para>
-This is a rough guide to assist those wishing to migrate from NT4 domain control to
-Samba-3 based domain control.
-</para>
-
-<sect1>
-<title>Planning and Getting Started</title>
-
-<para>
-In the IT world there is often a saying that all problems are encountered because of
-poor planning. The corrollary to this saying is that not all problems can be anticpated
-and planned for. Then again, good planning will anticpate most show stopper type situations.
-</para>
-
-<para>
-Those wishing to migrate from MS Windows NT4 domain control to a Samba-3 domain control
-environment would do well to develop a detailed migration plan. So here are a few pointers to
-help migration get under way.
-</para>
-
-<sect2>
-<title>Objectives</title>
-
-<para>
-The key objective for most organisations will be to make the migration from MS Windows NT4
-to Samba-3 domain control as painless as possible. One of the challenges you may experience
-in your migration process may well be one of convincing management that the new environment
-should remain in place. Many who have introduced open source technologies have experienced
-pressure to return to a Microsoft based platform solution at the first sign of trouble.
-</para>
-
-<para>
-It is strongly advised that before attempting a migration to a Samba-3 controlled network
-that every possible effort be made to gain all-round commitment to the change. Firstly, you
-should know precisely <emphasis>why</emphasis> the change is important for the organisation.
-Possible motivations to make a change include:
-</para>
-
-<itemizedlist>
-<listitem>
- <para>Improve network manageability</para>
-</listitem>
-<listitem>
- <para>Obtain better user level functionality</para>
-</listitem>
-<listitem>
- <para>Reduce network operating costs</para>
-</listitem>
-<listitem>
- <para>Reduce exposure caused by Microsoft withdrawal of NT4 support</para>
-</listitem>
-<listitem>
- <para>Avoid MS License 6 implications</para>
-</listitem>
-<listitem>
- <para>Reduce organisation's dependency on Microsoft</para>
-</listitem>
-</itemizedlist>
-
-<para>
-It is vital that it be well recognised that Samba-3 is NOT MS Windows NT4. Samba-3 offers
-an alternative solution that is both different from MS Windows NT4 and that offers some
-advantages compared with it. It should also be recognised that Samba-3 lacks many of the
-features that Microsoft has promoted as core values in migration from MS Windows NT4 to
-MS Windows 2000 and beyond (with or without Active Directory services).
-</para>
-
-<para>
-What are the features that Samba-3 can NOT provide?
-</para>
-
-<itemizedlist>
-<listitem>
- <para>Active Directory Server</para>
-</listitem>
-<listitem>
- <para>Group Policy Objects (in Active Direcrtory)</para>
-</listitem>
-<listitem>
- <para>Machine Policy objects</para>
-</listitem>
-<listitem>
- <para>Logon Scripts in Active Directorty</para>
-</listitem>
-<listitem>
- <para>Software Application and Access Controls in Active Directory</para>
-</listitem>
-</itemizedlist>
-
-<para>
-The features that Samba-3 DOES provide and that may be of compelling interest to your site
-includes:
-</para>
-
-<itemizedlist>
-<listitem>
- <para>Lower Cost of Ownership</para>
-</listitem>
-<listitem>
- <para>Global availability of support with no strings attached</para>
-</listitem>
-<listitem>
- <para>Dynamic SMB Servers (ie:Can run more than one server per Unix/Linux system)</para>
-</listitem>
-<listitem>
- <para>Creation of on-the-fly logon scripts</para>
-</listitem>
-<listitem>
- <para>Creation of on-the-fly Policy Files</para>
-</listitem>
-<listitem>
- <para>Greater Stability, Reliability, Performance and Availability</para>
-</listitem>
-<listitem>
- <para>Manageability via an ssh connection</para>
-</listitem>
-<listitem>
- <para>Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam)</para>
-</listitem>
-<listitem>
- <para>Ability to implement a full single-signon architecture</para>
-</listitem>
-<listitem>
- <para>Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand</para>
-</listitem>
-</itemizedlist>
-
-<para>
-Before migrating a network from MS Windows NT4 to Samba-3 it is vital that all necessary factors are
-considered. Users should be educated about changes they may experience so that the change will be a
-welcome one and not become an obstacle to the work they need to do. The following are some of the
-factors that will go into a successful migration:
-</para>
-
-<sect3>
-<title>Domain Layout</title>
-
-<para>
-Samba-3 can be configured as a domain controller, a back-up domain controller (probably best called
-a secondary controller), a domain member, or as a stand-alone server. The Windows network security
-domain context should be sized and scoped before implementation. Particular attention needs to be
-paid to the location of the primary domain controller (PDC) as well as backup controllers (BDCs).
-It should be noted that one way in which Samba-3 differs from Microsoft technology is that if one
-chooses to use an LDAP authentication backend then the same database can be used by several different
-domains. This means that in a complex organisation there can be a single LDAP database, that itself
-can be distributed, that can simultaneously serve multiple domains (that can also be widely distributed).
-</para>
-
-<para>
-It is recommended that from a design perspective, the number of users per server, as well as the number
-of servers, per domain should be scaled according to needs and should also consider server capacity
-and network bandwidth.
-</para>
-
-<para>
-A physical network segment may house several domains, each of which may span multiple network segments.
-Where domains span routed network segments it is most advisable to consider and test the performance
-implications of the design and layout of a network. A Centrally located domain controller that is being
-designed to serve mulitple routed network segments may result in severe performance problems if the
-response time (eg: ping timing) between the remote segment and the PDC is more than 100 ms. In situations
-where the delay is too long it is highly recommended to locate a backup controller (BDC) to serve as
-the local authentication and access control server.
-</para>
-</sect3>
-
-<sect3>
-<title>Server Share and Directory Layout</title>
-
-<para>
-There are few cardinal rules to effective network design that can be broken with impunity.
-The most important rule of effective network management is that simplicity is king in every
-well controlled network. Every part of the infrastructure must be managed, the more complex
-it is, the greater will be the demand of keeping systems secure and functional.
-</para>
-
-<para>
-The nature of the data that must be stored needs to be born in mind when deciding how many
-shares must be created. The physical disk space layout should also be taken into account
-when designing where share points will be created. Keep in mind that all data needs to be
-backed up, thus the simpler the disk layout the easier it will be to keep track of what must
-be backed up to tape or other off-line storage medium. Always plan and implement for minimum
-maintenance. Leave nothing to chance in your design, above all, do not leave backups to chance:
-Backup and test, validate every backup, create a disaster recovery plan and prove that it works.
-</para>
-
-<para>
-Users should be grouped according to data access control needs. File and directory access
-is best controlled via group permissions and the use of the "sticky bit" on group controlled
-directories may substantially avoid file access complaints from samba share users.
-</para>
-
-<para>
-Many network administrators who are new to the game will attempt to use elaborate techniques
-to set access controls, on files, directories, shares, as well as in share definitions.
-There is the ever present danger that that administrator's successor will not understand the
-complex mess that has been inherited. Remember, apparent job security through complex design
-and implementation may ultimately cause loss of operations and downtime to users as the new
-administrator learns to untangle your web. Keep access controls simple and effective and
-make sure that users will never be interrupted by the stupidity of complexity.
-</para>
-</sect3>
-
-<sect3>
-<title>Logon Scripts</title>
-
-<para>
-Please refer to the section of this document on Advanced Network Adminsitration for information
-regarding the network logon script options for Samba-3. Logon scripts can help to ensure that
-all users gain share and printer connections they need.
-</para>
-
-<para>
-Logon scripts can be created on-the-fly so that all commands executed are specific to the
-rights and privilidges granted to the user. The preferred controls should be affected through
-group membership so that group information can be used to custom create a logong script using
-the <filename>root preexec</filename> parameters to the <filename>NETLOGON</filename> share.
-</para>
-
-<para>
-Some sites prefer to use a tool such as <filename>kixstart</filename> to establish a controlled
-user environment. In any case you may wish to do a google search for logon script process controls.
-In particular, you may wish to explore the use of the Microsoft knowledgebase article KB189105 that
-deals with how to add printers without user intervention via the logon script process.
-</para>
-</sect3>
-
-<sect3>
-<title>Profile Migration/Creation</title>
-
-<para>
-User and Group Profiles may be migrated using the tools described in the section titled Desktop Profile
-Management.
-</para>
-
-<para>
-Profiles may also be managed using the Samba-3 tool <filename>profiles</filename>. This tool allows
-the MS Windows NT style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file
-to be changed to the SID of the Samba-3 domain.
-</para>
-</sect3>
-
-<sect3>
-<title>User and Group Accounts</title>
-
-<para>
-It is possible to migrate all account settings from an MS Windows NT4 domain to Samba-3. Before
-attempting to migrate user and group accounts it is STRONGLY advised to create in Samba-3 the
-groups that are present on the MS Windows NT4 domain <emphasis>AND</emphasis> to connect these to
-suitable Unix/Linux groups. Following this simple advice will mean that all user and group attributes
-should migrate painlessly.
-</para>
-</sect3>
-
-</sect2>
-
-<sect2>
-<title>Steps In Migration Process</title>
-
-<para>
-The approximate migration process is described below.
-</para>
-
-<itemizedlist>
-<listitem><para>
-You will have an NT4 PDC that has the users, groups, policies and profiles to be migrated
-</para></listitem>
-
-<listitem><para>
-Samba-3 set up as a DC with netlogon share, profile share, etc.
-</para></listitem>
-</itemizedlist>
-
-<procedure><title>The Account Migration Process</title>
- <step><para>Create a BDC account for the samba server using NT Server Manager</para>
- <substeps><step><para>Samba must NOT be running</para></step></substeps></step>
-
- <step>
- <para>rpcclient NT4PDC -U Administrator%passwd</para>
- <substeps><step><para>lsaquery</para></step>
- <step><para>Note the SID returned</para></step>
- </substeps>
- </step>
-
- <step><para>net getsid -S NT4PDC -w DOMNAME -U Administrator%passwd</para>
- <substeps><step><para>Note the SID</para></step></substeps>
- </step>
-
- <step><para>net getlocalsid</para>
- <substeps>
- <step><para>Note the SID, now check that all three SIDS reported are the same!</para></step>
- </substeps>
- </step>
-
- <step><para>net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd</para></step>
-
- <step><para>net rpc vampire -S NT4PDC -U administrator%passwd</para></step>
-
- <step><para>pdbedit -l</para>
- <substeps><step><para>Note - did the users migrate?</para></step></substeps>
- </step>
-
- <step><para>initGrps.sh DOMNAME</para></step>
-
- <step><para>net groupmap list</para>
- <substeps><step><para>Now check that all groups are recognised</para></step></substeps>
- </step>
-
- <step><para>net rpc campire -S NT4PDC -U administrator%passwd</para></step>
-
- <step><para>pdbedit -lv</para>
- <substeps><step>
- <para>Note - check that all group membership has been migrated</para>
- </step></substeps>
- </step>
-</procedure>
-
-<para>
-Now it is time to migrate all the profiles, then migrate all policy files.
-More later.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Migration Options</title>
-
-<para>
-Based on feedback from many sites as well as from actual installation and maintenance
-experience sites that wish to migrate from MS Windows NT4 Domain Control to a Samba
-based solution fit into three basic categories.
-</para>
-
-<table frame="all"><title>The 3 Major Site Types</title>
-<tgroup cols="2" align="center">
- <thead>
- <row><entry align="center">Number of Users</entry><entry>Description</entry></row>
- </thead>
- <tbody>
- <row><entry align="center">&lt 50</entry><entry><para>Want simple conversion with NO pain</para></entry></row>
- <row><entry align="center">50 - 250</entry><entry><para>Want new features, can manage some in-house complexity</para></entry></row>
- <row><entry align="center">&gt 250</entry><entry><para>Solution/Implementation MUST scale well, complex needs. Cross departmental decision process. Local expertise in most areas</para></entry></row>
- </tbody>
-</tgroup>
-</table>
-
-<sect2>
-<title>Planning for Success</title>
-
-<para>
-There are three basic choices for sites that intend to migrate from MS Windwows NT4
-to Samba-3.
-</para>
-
-<itemizedlist>
- <listitem><para>
- Simple Conversion (total replacement)
- </para></listitem>
-
- <listitem><para>
- Upgraded Conversion (could be one of integration)
- </para></listitem>
-
- <listitem><para>
- Complete Redesign (completely new solution)
- </para></listitem>
-</itemizedlist>
-
-<para>
-No matter what choice you make, the following rules will minimise down-stream problems:
-</para>
-
-<itemizedlist>
- <listitem><para>
- Take sufficient time
- </para></listitem>
-
- <listitem><para>
- Avoid Panic
- </para></listitem>
-
- <listitem><para>
- Test ALL assumptions
- </para></listitem>
-
- <listitem><para>
- Test full roll-out program, including workstation deployment
- </para></listitem>
-</itemizedlist>
-
-<table frame="top"><title>Nature of the Conversion Choices</title>
-<tgroup cols="3" align="center">
- <thead>
- <row><entry>Simple</entry><entry>Upgraded</entry><entry>Redesign</entry></row>
- </thead>
- <tbody>
- <row>
- <entry><para>Make use of minimal OS specific features</para></entry>
- <entry><para>Translate NT4 features to new host OS features</para></entry>
- <entry><para>Decide:</para></entry>
- </row>
- <row>
- <entry><para>Suck all accounts from NT4 into Samba-3</para></entry>
- <entry><para>Copy and improve:</para></entry>
- <entry><para>Authentication Regime (database location and access)</para></entry>
- </row>
- <row>
- <entry><para>Make least number of operational changes</para></entry>
- <entry><para>Make progressive improvements</para></entry>
- <entry><para>Desktop Management Methods</para></entry>
- </row>
- <row>
- <entry><para>Take least amount of time to migrate</para></entry>
- <entry><para>Minimise user impact</para></entry>
- <entry><para>Better Control of Desktops / Users</para></entry>
- </row>
- <row>
- <entry><para>Live versus Isolated Conversion</para></entry>
- <entry><para>Maximise functionality</para></entry>
- <entry><para>Identify Needs for: Manageability, Scalability, Security, Availability</para></entry>
- </row>
- <row>
- <entry><para>Integrate Samba-3 then migrate while users are active, then Change of control (ie: swap out)</para></entry>
- <entry><para>Take advantage of lower maintenance opportunity</para></entry>
- <entry><para></para></entry>
- </row>
- </tbody>
-</tgroup>
-</table>
-</sect2>
-
-<sect2>
-<title>Samba Implementation Choices</title>
-
-<para><programlisting>
-Authentication database back end
- Winbind (external Samba or NT4/200x server)
- Can use pam_mkhomedir.so to auto-create home dirs
- External server could use Active Directory or NT4 Domain
-
-Database type
- smbpasswd, tdbsam, ldapsam, MySQLsam
-
-Access Control Points
- On the Share itself (Use NT4 Server Manager)
- On the file system
- Unix permissions on files and directories
- Posix ACLs enablement in file system?
- Through Samba share parameters
- Not recommended - except as only resort
-
-Policies (migrate or create new ones)
- Group Policy Editor (NT4)
- Watch out for Tattoo effect
-
-User and Group Profiles
- Platform specific so use platform tool to change from a Local
- to a Roaming profile Can use new profiles tool to change SIDs
- (NTUser.DAT)
-
-Logon Scripts (Know how they work)
-
-User and Group mapping to Unix/Linux
- username map facility may be needed
- Use 'net groupmap' to connect NT4 groups to Unix groups
- Use pdbedit to set/change user configuration
-NOTE:
-If migrating to LDAP back end it may be easier to dump initial LDAP database
-to LDIF, then edit, then reload into LDAP
-
- OS specific scripts / programs may be needed
- Add / delete Users
- Note OS limits on size of name (Linux 8 chars)
- NT4 up to 254 chars
- Add / delete machines
- Applied only to domain members (note up to 16 chars)
- Add / delete Groups
- Note OS limits on size and nature
- Linux limit is 16 char,
- no spaces and no upper case chars (groupadd)
-
-Migration Tools
- Domain Control (NT4 Style)
- Profiles, Policies, Access Controls, Security
-
-Migration Tools
- Samba: net, rpcclient, smbpasswd, pdbedit, profiles
- Windows: NT4 Domain User Manager, Server Manager (NEXUS)
-
-Authentication
- New SAM back end (smbpasswd, tdbsam, ldapsam, mysqlsam)
-</programlisting>
-</para>
-
-</sect2>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/NT_Security.sgml b/docs/docbook/projdoc/NT_Security.sgml
deleted file mode 100644
index 9bff25337c..0000000000
--- a/docs/docbook/projdoc/NT_Security.sgml
+++ /dev/null
@@ -1,335 +0,0 @@
-<chapter id="unix-permissions">
-<chapterinfo>
- &author.jeremy;
- <pubdate>12 Apr 1999</pubdate>
-</chapterinfo>
-
-<title>UNIX Permission Bits and Windows NT Access Control Lists</title>
-
-<sect1>
- <title>Viewing and changing UNIX permissions using the NT
- security dialogs</title>
-
- <para>Windows NT clients can use their native security settings
- dialog box to view and modify the underlying UNIX permissions.</para>
-
- <para>Note that this ability is careful not to compromise
- the security of the UNIX host Samba is running on, and
- still obeys all the file permission rules that a Samba
- administrator can set.</para>
-
- <note>
- <para>
- All access to Unix/Linux system file via Samba is controlled at
- the operating system file access control level. When trying to
- figure out file access problems it is vitally important to identify
- the identity of the Windows user as it is presented by Samba at
- the point of file access. This can best be determined from the
- Samba log files.
- </para>
- </note>
-</sect1>
-
-<sect1>
- <title>How to view file security on a Samba share</title>
-
- <para>From an NT4/2000/XP client, single-click with the right
- mouse button on any file or directory in a Samba mounted
- drive letter or UNC path. When the menu pops-up, click
- on the <emphasis>Properties</emphasis> entry at the bottom of
- the menu. This brings up the file properties dialog
- box. Click on the tab <emphasis>Security</emphasis> and you
- will see three buttons, <emphasis>Permissions</emphasis>,
- <emphasis>Auditing</emphasis>, and <emphasis>Ownership</emphasis>.
- The <emphasis>Auditing</emphasis> button will cause either
- an error message <errorname>A requested privilege is not held
- by the client</errorname> to appear if the user is not the
- NT Administrator, or a dialog which is intended to allow an
- Administrator to add auditing requirements to a file if the
- user is logged on as the NT Administrator. This dialog is
- non-functional with a Samba share at this time, as the only
- useful button, the <command>Add</command> button will not currently
- allow a list of users to be seen.</para>
-
-</sect1>
-
-<sect1>
- <title>Viewing file ownership</title>
-
- <para>Clicking on the <command>"Ownership"</command> button
- brings up a dialog box telling you who owns the given file. The
- owner name will be of the form :</para>
-
- <para><command>"SERVER\user (Long name)"</command></para>
-
- <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of
- the Samba server, <replaceable>user</replaceable> is the user name of
- the UNIX user who owns the file, and <replaceable>(Long name)</replaceable>
- is the descriptive string identifying the user (normally found in the
- GECOS field of the UNIX password database). Click on the <command>Close
- </command> button to remove this dialog.</para>
-
- <para>If the parameter <parameter>nt acl support</parameter>
- is set to <constant>false</constant> then the file owner will
- be shown as the NT user <command>"Everyone"</command>.</para>
-
- <para>The <command>Take Ownership</command> button will not allow
- you to change the ownership of this file to yourself (clicking on
- it will display a dialog box complaining that the user you are
- currently logged onto the NT client cannot be found). The reason
- for this is that changing the ownership of a file is a privileged
- operation in UNIX, available only to the <emphasis>root</emphasis>
- user. As clicking on this button causes NT to attempt to change
- the ownership of a file to the current user logged into the NT
- client this will not work with Samba at this time.</para>
-
- <para>There is an NT chown command that will work with Samba
- and allow a user with Administrator privilege connected
- to a Samba server as root to change the ownership of
- files on both a local NTFS filesystem or remote mounted NTFS
- or Samba drive. This is available as part of the <emphasis>Seclib
- </emphasis> NT security library written by Jeremy Allison of
- the Samba Team, available from the main Samba ftp site.</para>
-
-</sect1>
-
-<sect1>
- <title>Viewing file or directory permissions</title>
-
- <para>The third button is the <command>"Permissions"</command>
- button. Clicking on this brings up a dialog box that shows both
- the permissions and the UNIX owner of the file or directory.
- The owner is displayed in the form :</para>
-
- <para><command>"SERVER\user (Long name)"</command></para>
-
- <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of
- the Samba server, <replaceable>user</replaceable> is the user name of
- the UNIX user who owns the file, and <replaceable>(Long name)</replaceable>
- is the descriptive string identifying the user (normally found in the
- GECOS field of the UNIX password database).</para>
-
- <para>If the parameter <parameter>nt acl support</parameter>
- is set to <constant>false</constant> then the file owner will
- be shown as the NT user <command>"Everyone"</command> and the
- permissions will be shown as NT "Full Control".</para>
-
-
- <para>The permissions field is displayed differently for files
- and directories, so I'll describe the way file permissions
- are displayed first.</para>
-
- <sect2>
- <title>File Permissions</title>
-
- <para>The standard UNIX user/group/world triple and
- the corresponding "read", "write", "execute" permissions
- triples are mapped by Samba into a three element NT ACL
- with the 'r', 'w', and 'x' bits mapped into the corresponding
- NT permissions. The UNIX world permissions are mapped into
- the global NT group <command>Everyone</command>, followed
- by the list of permissions allowed for UNIX world. The UNIX
- owner and group permissions are displayed as an NT
- <command>user</command> icon and an NT <command>local
- group</command> icon respectively followed by the list
- of permissions allowed for the UNIX user and group.</para>
-
- <para>As many UNIX permission sets don't map into common
- NT names such as <command>"read"</command>, <command>
- "change"</command> or <command>"full control"</command> then
- usually the permissions will be prefixed by the words <command>
- "Special Access"</command> in the NT display list.</para>
-
- <para>But what happens if the file has no permissions allowed
- for a particular UNIX user group or world component ? In order
- to allow "no permissions" to be seen and modified then Samba
- overloads the NT <command>"Take Ownership"</command> ACL attribute
- (which has no meaning in UNIX) and reports a component with
- no permissions as having the NT <command>"O"</command> bit set.
- This was chosen of course to make it look like a zero, meaning
- zero permissions. More details on the decision behind this will
- be given below.</para>
- </sect2>
-
- <sect2>
- <title>Directory Permissions</title>
-
- <para>Directories on an NT NTFS file system have two
- different sets of permissions. The first set of permissions
- is the ACL set on the directory itself, this is usually displayed
- in the first set of parentheses in the normal <command>"RW"</command>
- NT style. This first set of permissions is created by Samba in
- exactly the same way as normal file permissions are, described
- above, and is displayed in the same way.</para>
-
- <para>The second set of directory permissions has no real meaning
- in the UNIX permissions world and represents the <command>
- "inherited"</command> permissions that any file created within
- this directory would inherit.</para>
-
- <para>Samba synthesises these inherited permissions for NT by
- returning as an NT ACL the UNIX permission mode that a new file
- created by Samba on this share would receive.</para>
- </sect2>
-</sect1>
-
-<sect1>
- <title>Modifying file or directory permissions</title>
-
- <para>Modifying file and directory permissions is as simple
- as changing the displayed permissions in the dialog box, and
- clicking the <command>OK</command> button. However, there are
- limitations that a user needs to be aware of, and also interactions
- with the standard Samba permission masks and mapping of DOS
- attributes that need to also be taken into account.</para>
-
- <para>If the parameter <parameter>nt acl support</parameter>
- is set to <constant>false</constant> then any attempt to set
- security permissions will fail with an <command>"Access Denied"
- </command> message.</para>
-
- <para>The first thing to note is that the <command>"Add"</command>
- button will not return a list of users in Samba (it will give
- an error message of <command>"The remote procedure call failed
- and did not execute"</command>). This means that you can only
- manipulate the current user/group/world permissions listed in
- the dialog box. This actually works quite well as these are the
- only permissions that UNIX actually has.</para>
-
- <para>If a permission triple (either user, group, or world)
- is removed from the list of permissions in the NT dialog box,
- then when the <command>"OK"</command> button is pressed it will
- be applied as "no permissions" on the UNIX side. If you then
- view the permissions again the "no permissions" entry will appear
- as the NT <command>"O"</command> flag, as described above. This
- allows you to add permissions back to a file or directory once
- you have removed them from a triple component.</para>
-
- <para>As UNIX supports only the "r", "w" and "x" bits of
- an NT ACL then if other NT security attributes such as "Delete
- access" are selected then they will be ignored when applied on
- the Samba server.</para>
-
- <para>When setting permissions on a directory the second
- set of permissions (in the second set of parentheses) is
- by default applied to all files within that directory. If this
- is not what you want you must uncheck the <command>"Replace
- permissions on existing files"</command> checkbox in the NT
- dialog before clicking <command>"OK"</command>.</para>
-
- <para>If you wish to remove all permissions from a
- user/group/world component then you may either highlight the
- component and click the <command>"Remove"</command> button,
- or set the component to only have the special <command>"Take
- Ownership"</command> permission (displayed as <command>"O"
- </command>) highlighted.</para>
-</sect1>
-
-<sect1>
- <title>Interaction with the standard Samba create mask
- parameters</title>
-
- <para>There are four parameters
- to control interaction with the standard Samba create mask parameters.
- These are :</para>
-
- <para><parameter>security mask</parameter></para>
- <para><parameter>force security mode</parameter></para>
- <para><parameter>directory security mask</parameter></para>
- <para><parameter>force directory security mode</parameter></para>
-
- <para>Once a user clicks <command>"OK"</command> to apply the
- permissions Samba maps the given permissions into a user/group/world
- r/w/x triple set, and then will check the changed permissions for a
- file against the bits set in the <ulink url="smb.conf.5.html#SECURITYMASK">
- <parameter>security mask</parameter></ulink> parameter. Any bits that
- were changed that are not set to '1' in this parameter are left alone
- in the file permissions.</para>
-
- <para>Essentially, zero bits in the <parameter>security mask</parameter>
- mask may be treated as a set of bits the user is <emphasis>not</emphasis>
- allowed to change, and one bits are those the user is allowed to change.
- </para>
-
- <para>If not set explicitly this parameter is set to the same value as
- the <ulink url="smb.conf.5.html#CREATEMASK"><parameter>create mask
- </parameter></ulink> parameter. To allow a user to modify all the
- user/group/world permissions on a file, set this parameter
- to 0777.</para>
-
- <para>Next Samba checks the changed permissions for a file against
- the bits set in the <ulink url="smb.conf.5.html#FORCESECURITYMODE">
- <parameter>force security mode</parameter></ulink> parameter. Any bits
- that were changed that correspond to bits set to '1' in this parameter
- are forced to be set.</para>
-
- <para>Essentially, bits set in the <parameter>force security mode
- </parameter> parameter may be treated as a set of bits that, when
- modifying security on a file, the user has always set to be 'on'.</para>
-
- <para>If not set explicitly this parameter is set to the same value
- as the <ulink url="smb.conf.5.html#FORCECREATEMODE"><parameter>force
- create mode</parameter></ulink> parameter.
- To allow a user to modify all the user/group/world permissions on a file
- with no restrictions set this parameter to 000.</para>
-
- <para>The <parameter>security mask</parameter> and <parameter>force
- security mode</parameter> parameters are applied to the change
- request in that order.</para>
-
- <para>For a directory Samba will perform the same operations as
- described above for a file except using the parameter <parameter>
- directory security mask</parameter> instead of <parameter>security
- mask</parameter>, and <parameter>force directory security mode
- </parameter> parameter instead of <parameter>force security mode
- </parameter>.</para>
-
- <para>The <parameter>directory security mask</parameter> parameter
- by default is set to the same value as the <parameter>directory mask
- </parameter> parameter and the <parameter>force directory security
- mode</parameter> parameter by default is set to the same value as
- the <parameter>force directory mode</parameter> parameter. </para>
-
- <para>In this way Samba enforces the permission restrictions that
- an administrator can set on a Samba share, whilst still allowing users
- to modify the permission bits within that restriction.</para>
-
- <para>If you want to set up a share that allows users full control
- in modifying the permission bits on their files and directories and
- doesn't force any particular bits to be set 'on', then set the following
- parameters in the &smb.conf; file in that share specific section :</para>
-
- <para><parameter>security mask = 0777</parameter></para>
- <para><parameter>force security mode = 0</parameter></para>
- <para><parameter>directory security mask = 0777</parameter></para>
- <para><parameter>force directory security mode = 0</parameter></para>
-</sect1>
-
-<sect1>
- <title>Interaction with the standard Samba file attribute
- mapping</title>
-
- <para>Samba maps some of the DOS attribute bits (such as "read
- only") into the UNIX permissions of a file. This means there can
- be a conflict between the permission bits set via the security
- dialog and the permission bits set by the file attribute mapping.
- </para>
-
- <para>One way this can show up is if a file has no UNIX read access
- for the owner it will show up as "read only" in the standard
- file attributes tabbed dialog. Unfortunately this dialog is
- the same one that contains the security info in another tab.</para>
-
- <para>What this can mean is that if the owner changes the permissions
- to allow themselves read access using the security dialog, clicks
- <command>"OK"</command> to get back to the standard attributes tab
- dialog, and then clicks <command>"OK"</command> on that dialog, then
- NT will set the file permissions back to read-only (as that is what
- the attributes still say in the dialog). This means that after setting
- permissions and clicking <command>"OK"</command> to get back to the
- attributes dialog you should always hit <command>"Cancel"</command>
- rather than <command>"OK"</command> to ensure that your changes
- are not overridden.</para>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/NetworkBrowsing.sgml b/docs/docbook/projdoc/NetworkBrowsing.sgml
deleted file mode 100644
index 29768ea42a..0000000000
--- a/docs/docbook/projdoc/NetworkBrowsing.sgml
+++ /dev/null
@@ -1,1288 +0,0 @@
-<chapter id="NetworkBrowsing">
-<chapterinfo>
- &author.jht;
- <pubdate>July 5, 1998</pubdate>
- <pubdate>Updated: April 21, 2003</pubdate>
-</chapterinfo>
-
-<title>Samba / MS Windows Network Browsing Guide</title>
-
-<para>
-This document contains detailed information as well as a fast track guide to
-implementing browsing across subnets and / or across workgroups (or domains).
-WINS is the best tool for resolution of NetBIOS names to IP addesses. WINS is
-NOT involved in browse list handling except by way of name to address resolution.
-</para>
-
-<note><para>
-MS Windows 2000 and later can be configured to operate with NO NetBIOS
-over TCP/IP. Samba-3 and later also supports this mode of operation.
-When the use of NetBIOS over TCP/IP has been disabled then the primary
-means for resolution of MS Windows machine names is via DNS and Active Directory.
-The following information assumes that your site is running NetBIOS over TCP/IP.
-</para></note>
-
-<sect1>
-<title>What is Browsing?</title>
-
-<para>
-To most people browsing means that they can see the MS Windows and Samba servers
-in the Network Neighborhood, and when the computer icon for a particular server is
-clicked, it opens up and shows the shares and printers available on the target server.
-</para>
-
-<para>
-What seems so simple is in fact a very complex interaction of different technologies.
-The technologies (or methods) employed in making all of this work includes:
-</para>
-
-<simplelist>
- <member>MS Windows machines register their presence to the network</member>
- <member>Machines announce themselves to other machines on the network</member>
- <member>One or more machine on the network collates the local announcements</member>
- <member>The client machine finds the machine that has the collated list of machines</member>
- <member>The client machine is able to resolve the machine names to IP addresses</member>
- <member>The client machine is able to connect to a target machine</member>
-</simplelist>
-
-<para>
-The samba application that controls/manages browse list management and name resolution is
-called <filename>nmbd</filename>. The configuration parameters involved in nmbd's operation are:
-</para>
-
-<para><programlisting>
- Browsing options:
- -----------------
- * os level
- lm announce
- lm interval
- * preferred master
- * local master
- * domain master
- browse list
- enhanced browsing
-
- Name Resolution Method:
- -----------------------
- * name resolve order
-
- WINS options:
- -------------
- dns proxy
- wins proxy
- * wins server
- * wins support
- wins hook
-</programlisting></para>
-
-<para>
-WINS Server and WINS Support are mutually exclusive options. Those marked with an '*' are
-the only options that commonly MAY need to be modified. Even if not one of these parameters
-is set nmbd will still do it's job.
-</para>
-</sect1>
-
-<sect1>
-<title>Discussion</title>
-
-<para>
-Firstly, all MS Windows networking is based on SMB (Server Message
-Block) based messaging. SMB messaging may be implemented using NetBIOS or
-without NetBIOS. Samba implements NetBIOS by encapsulating it over TCP/IP.
-MS Windows products can do likewise. NetBIOS based networking uses broadcast
-messaging to affect browse list management. When running NetBIOS over
-TCP/IP this uses UDP based messaging. UDP messages can be broadcast or unicast.
-</para>
-
-<para>
-Normally, only unicast UDP messaging can be forwarded by routers. The
-<command>remote announce</command>
-parameter to smb.conf helps to project browse announcements
-to remote network segments via unicast UDP. Similarly, the
-<command>remote browse sync</command> parameter of <filename>smb.conf</filename>
-implements browse list collation using unicast UDP.
-</para>
-
-<para>
-Secondly, in those networks where Samba is the only SMB server technology
-wherever possible <filename>nmbd</filename> should be configured on one (1) machine as the WINS
-server. This makes it easy to manage the browsing environment. If each network
-segment is configured with it's own Samba WINS server, then the only way to
-get cross segment browsing to work is by using the
-<command>remote announce</command> and the <command>remote browse sync</command>
-parameters to your <filename>smb.conf</filename> file.
-</para>
-
-<para>
-If only one WINS server is used for an entire multi-segment network then
-the use of the <command>remote announce</command> and the
-<command>remote browse sync</command> parameters should NOT be necessary.
-</para>
-
-<para>
-As of Samba 3 WINS replication is being worked on. The bulk of the code has
-been committed, but it still needs maturation.
-</para>
-
-<para>
-Right now samba WINS does not support MS-WINS replication. This means that
-when setting up Samba as a WINS server there must only be one <filename>nmbd</filename> configured
-as a WINS server on the network. Some sites have used multiple Samba WINS
-servers for redundancy (one server per subnet) and then used
-<command>remote browse sync</command> and <command>remote announce</command>
-to affect browse list collation across all
-segments. Note that this means clients will only resolve local names,
-and must be configured to use DNS to resolve names on other subnets in
-order to resolve the IP addresses of the servers they can see on other
-subnets. This setup is not recommended, but is mentioned as a practical
-consideration (ie: an 'if all else fails' scenario).
-</para>
-
-<para>
-Lastly, take note that browse lists are a collection of unreliable broadcast
-messages that are repeated at intervals of not more than 15 minutes. This means
-that it will take time to establish a browse list and it can take up to 45
-minutes to stabilise, particularly across network segments.
-</para>
-
-</sect1>
-
-<sect1>
-<title>How Browsing Functions</title>
-
-<para>
-As stated above, MS Windows machines register their NetBIOS names
-(ie: the machine name for each service type in operation) on start
-up. Also, as stated above, the exact method by which this name registration
-takes place is determined by whether or not the MS Windows client/server
-has been given a WINS server address, whether or not LMHOSTS lookup
-is enabled, or if DNS for NetBIOS name resolution is enabled, etc.
-</para>
-
-<para>
-In the case where there is no WINS server all name registrations as
-well as name lookups are done by UDP broadcast. This isolates name
-resolution to the local subnet, unless LMHOSTS is used to list all
-names and IP addresses. In such situations Samba provides a means by
-which the samba server name may be forcibly injected into the browse
-list of a remote MS Windows network (using the
-<command>remote announce</command> parameter).
-</para>
-
-<para>
-Where a WINS server is used, the MS Windows client will use UDP
-unicast to register with the WINS server. Such packets can be routed
-and thus WINS allows name resolution to function across routed networks.
-</para>
-
-<para>
-During the startup process an election will take place to create a
-local master browser if one does not already exist. On each NetBIOS network
-one machine will be elected to function as the domain master browser. This
-domain browsing has nothing to do with MS security domain control.
-Instead, the domain master browser serves the role of contacting each local
-master browser (found by asking WINS or from LMHOSTS) and exchanging browse
-list contents. This way every master browser will eventually obtain a complete
-list of all machines that are on the network. Every 11-15 minutes an election
-is held to determine which machine will be the master browser. By the nature of
-the election criteria used, the machine with the highest uptime, or the
-most senior protocol version, or other criteria, will win the election
-as domain master browser.
-</para>
-
-<para>
-Clients wishing to browse the network make use of this list, but also depend
-on the availability of correct name resolution to the respective IP
-address/addresses.
-</para>
-
-<para>
-Any configuration that breaks name resolution and/or browsing intrinsics
-will annoy users because they will have to put up with protracted
-inability to use the network services.
-</para>
-
-<para>
-Samba supports a feature that allows forced synchonisation
-of browse lists across routed networks using the <command>remote
-browse sync</command> parameter in the <filename>smb.conf</filename> file.
-This causes Samba to contact the local master browser on a remote network and
-to request browse list synchronisation. This effectively bridges
-two networks that are separated by routers. The two remote
-networks may use either broadcast based name resolution or WINS
-based name resolution, but it should be noted that the <command>remote
-browse sync</command> parameter provides browse list synchronisation - and
-that is distinct from name to address resolution, in other
-words, for cross subnet browsing to function correctly it is
-essential that a name to address resolution mechanism be provided.
-This mechanism could be via DNS, <filename>/etc/hosts</filename>,
-and so on.
-</para>
-
-<sect2>
-<title>Setting up WORKGROUP Browsing</title>
-
-<para>
-To set up cross subnet browsing on a network containing machines
-in up to be in a WORKGROUP, not an NT Domain you need to set up one
-Samba server to be the Domain Master Browser (note that this is *NOT*
-the same as a Primary Domain Controller, although in an NT Domain the
-same machine plays both roles). The role of a Domain master browser is
-to collate the browse lists from local master browsers on all the
-subnets that have a machine participating in the workgroup. Without
-one machine configured as a domain master browser each subnet would
-be an isolated workgroup, unable to see any machines on any other
-subnet. It is the presense of a domain master browser that makes
-cross subnet browsing possible for a workgroup.
-</para>
-
-<para>
-In an WORKGROUP environment the domain master browser must be a
-Samba server, and there must only be one domain master browser per
-workgroup name. To set up a Samba server as a domain master browser,
-set the following option in the [global] section of the &smb.conf; file :
-</para>
-
-<para>
-<programlisting>
- domain master = yes
-</programlisting>
-</para>
-
-<para>
-The domain master browser should also preferrably be the local master
-browser for its own subnet. In order to achieve this set the following
-options in the [global] section of the &smb.conf; file :
-</para>
-
-<para>
-<programlisting>
- domain master = yes
- local master = yes
- preferred master = yes
- os level = 65
-</programlisting>
-</para>
-
-<para>
-The domain master browser may be the same machine as the WINS
-server, if you require.
-</para>
-
-<para>
-Next, you should ensure that each of the subnets contains a
-machine that can act as a local master browser for the
-workgroup. Any MS Windows NT/2K/XP/2003 machine should be
-able to do this, as will Windows 9x machines (although these
-tend to get rebooted more often, so it's not such a good idea
-to use these). To make a Samba server a local master browser
-set the following options in the [global] section of the
-&smb.conf; file :
-</para>
-
-<para>
-<programlisting>
- domain master = no
- local master = yes
- preferred master = yes
- os level = 65
-</programlisting>
-</para>
-
-<para>
-Do not do this for more than one Samba server on each subnet,
-or they will war with each other over which is to be the local
-master browser.
-</para>
-
-<para>
-The <command>local master</command> parameter allows Samba to act as a
-local master browser. The <command>preferred master</command> causes nmbd
-to force a browser election on startup and the <command>os level</command>
-parameter sets Samba high enough so that it should win any browser elections.
-</para>
-
-<para>
-If you have an NT machine on the subnet that you wish to
-be the local master browser then you can disable Samba from
-becoming a local master browser by setting the following
-options in the <command>[global]</command> section of the
-&smb.conf; file :
-</para>
-
-<para>
-<programlisting>
- domain master = no
- local master = no
- preferred master = no
- os level = 0
-</programlisting>
-</para>
-
-</sect2>
-
-<sect2>
-<title>Setting up DOMAIN Browsing</title>
-
-<para>
-If you are adding Samba servers to a Windows NT Domain then
-you must not set up a Samba server as a domain master browser.
-By default, a Windows NT Primary Domain Controller for a Domain
-name is also the Domain master browser for that name, and many
-things will break if a Samba server registers the Domain master
-browser NetBIOS name (<replaceable>DOMAIN</replaceable>&lt;1B&gt;)
-with WINS instead of the PDC.
-</para>
-
-<para>
-For subnets other than the one containing the Windows NT PDC
-you may set up Samba servers as local master browsers as
-described. To make a Samba server a local master browser set
-the following options in the <command>[global]</command> section
-of the &smb.conf; file :
-</para>
-
-<para>
-<programlisting>
- domain master = no
- local master = yes
- preferred master = yes
- os level = 65
-</programlisting>
-</para>
-
-<para>
-If you wish to have a Samba server fight the election with machines
-on the same subnet you may set the <command>os level</command> parameter
-to lower levels. By doing this you can tune the order of machines that
-will become local master browsers if they are running. For
-more details on this see the section <link linkend="browse-force-master">
-Forcing samba to be the master browser</link>
-below.
-</para>
-
-<para>
-If you have Windows NT machines that are members of the domain
-on all subnets, and you are sure they will always be running then
-you can disable Samba from taking part in browser elections and
-ever becoming a local master browser by setting following options
-in the <command>[global]</command> section of the &smb.conf;
-file :
-</para>
-
-<para>
-<programlisting>
- domain master = no
- local master = no
- preferred master = no
- os level = 0
-</programlisting>
-</para>
-
-</sect2>
-
-<sect2 id="browse-force-master">
-<title>Forcing samba to be the master</title>
-
-<para>
-Who becomes the <command>master browser</command> is determined by an election
-process using broadcasts. Each election packet contains a number of parameters
-which determine what precedence (bias) a host should have in the
-election. By default Samba uses a very low precedence and thus loses
-elections to just about anyone else.
-</para>
-
-<para>
-If you want Samba to win elections then just set the <command>os level</command> global
-option in &smb.conf; to a higher number. It defaults to 0. Using 34
-would make it win all elections over every other system (except other
-samba systems!)
-</para>
-
-<para>
-A <command>os level</command> of 2 would make it beat WfWg and Win95, but not MS Windows
-NT/2K Server. A MS Windows NT/2K Server domain controller uses level 32.
-</para>
-
-<para>The maximum os level is 255</para>
-
-<para>
-If you want samba to force an election on startup, then set the
-<command>preferred master</command> global option in &smb.conf; to "yes". Samba will
-then have a slight advantage over other potential master browsers
-that are not preferred master browsers. Use this parameter with
-care, as if you have two hosts (whether they are windows 95 or NT or
-samba) on the same local subnet both set with <command>preferred master</command> to
-"yes", then periodically and continually they will force an election
-in order to become the local master browser.
-</para>
-
-<para>
-If you want samba to be a <command>domain master browser</command>, then it is
-recommended that you also set <command>preferred master</command> to "yes", because
-samba will not become a domain master browser for the whole of your
-LAN or WAN if it is not also a local master browser on its own
-broadcast isolated subnet.
-</para>
-
-<para>
-It is possible to configure two samba servers to attempt to become
-the domain master browser for a domain. The first server that comes
-up will be the domain master browser. All other samba servers will
-attempt to become the domain master browser every 5 minutes. They
-will find that another samba server is already the domain master
-browser and will fail. This provides automatic redundancy, should
-the current domain master browser fail.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Making samba the domain master</title>
-
-<para>
-The domain master is responsible for collating the browse lists of
-multiple subnets so that browsing can occur between subnets. You can
-make samba act as the domain master by setting <command>domain master = yes</command>
-in &smb.conf;. By default it will not be a domain master.
-</para>
-
-<para>
-Note that you should NOT set Samba to be the domain master for a
-workgroup that has the same name as an NT Domain.
-</para>
-
-<para>
-When samba is the domain master and the master browser it will listen
-for master announcements (made roughly every twelve minutes) from local
-master browsers on other subnets and then contact them to synchronise
-browse lists.
-</para>
-
-<para>
-If you want samba to be the domain master then I suggest you also set
-the <command>os level</command> high enough to make sure it wins elections, and set
-<command>preferred master</command> to "yes", to get samba to force an election on
-startup.
-</para>
-
-<para>
-Note that all your servers (including samba) and clients should be
-using a WINS server to resolve NetBIOS names. If your clients are only
-using broadcasting to resolve NetBIOS names, then two things will occur:
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- your local master browsers will be unable to find a domain master
- browser, as it will only be looking on the local subnet.
- </para>
-</listitem>
-
-<listitem>
- <para>
- if a client happens to get hold of a domain-wide browse list, and
- a user attempts to access a host in that list, it will be unable to
- resolve the NetBIOS name of that host.
- </para>
-</listitem>
-</orderedlist>
-
-<para>
-If, however, both samba and your clients are using a WINS server, then:
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- your local master browsers will contact the WINS server and, as long as
- samba has registered that it is a domain master browser with the WINS
- server, your local master browser will receive samba's ip address
- as its domain master browser.
- </para>
-</listitem>
-
-<listitem>
- <para>
- when a client receives a domain-wide browse list, and a user attempts
- to access a host in that list, it will contact the WINS server to
- resolve the NetBIOS name of that host. as long as that host has
- registered its NetBIOS name with the same WINS server, the user will
- be able to see that host.
- </para>
-</listitem>
-</orderedlist>
-
-</sect2>
-
-<sect2>
-<title>Note about broadcast addresses</title>
-
-<para>
-If your network uses a "0" based broadcast address (for example if it
-ends in a 0) then you will strike problems. Windows for Workgroups
-does not seem to support a 0's broadcast and you will probably find
-that browsing and name lookups won't work.
-</para>
-</sect2>
-
-<sect2>
-<title>Multiple interfaces</title>
-
-<para>
-Samba now supports machines with multiple network interfaces. If you
-have multiple interfaces then you will need to use the <command>interfaces</command>
-option in &smb.conf; to configure them.
-</para>
-</sect2>
-<sect2>
-<title>Use of the <command>Remote Announce</command> parameter</title>
-<para>
-The <command>remote announce</command> parameter of
-<filename>smb.conf</filename> can be used to forcibly ensure
-that all the NetBIOS names on a network get announced to a remote network.
-The syntax of the <command>remote announce</command> parameter is:
-<programlisting>
- remote announce = a.b.c.d [e.f.g.h] ...
-</programlisting>
-_or_
-<programlisting>
- remote announce = a.b.c.d/WORKGROUP [e.f.g.h/WORKGROUP] ...
-</programlisting>
-
-where:
-<variablelist>
-<varlistentry><term><replaceable>a.b.c.d</replaceable> and
-<replaceable>e.f.g.h</replaceable></term>
-<listitem><para>is either the LMB (Local Master Browser) IP address
-or the broadcst address of the remote network.
-ie: the LMB is at 192.168.1.10, or the address
-could be given as 192.168.1.255 where the netmask
-is assumed to be 24 bits (255.255.255.0).
-When the remote announcement is made to the broadcast
-address of the remote network every host will receive
-our announcements. This is noisy and therefore
-undesirable but may be necessary if we do NOT know
-the IP address of the remote LMB.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><replaceable>WORKGROUP</replaceable></term>
-<listitem><para>is optional and can be either our own workgroup
-or that of the remote network. If you use the
-workgroup name of the remote network then our
-NetBIOS machine names will end up looking like
-they belong to that workgroup, this may cause
-name resolution problems and should be avoided.
-</para></listitem>
-</varlistentry>
-</variablelist>
-</para>
-
-</sect2>
-
-<sect2>
-<title>Use of the <command>Remote Browse Sync</command> parameter</title>
-
-<para>
-The <command>remote browse sync</command> parameter of
-<filename>smb.conf</filename> is used to announce to
-another LMB that it must synchronise it's NetBIOS name list with our
-Samba LMB. It works ONLY if the Samba server that has this option is
-simultaneously the LMB on it's network segment.
-</para>
-
-<para>
-The syntax of the <command>remote browse sync</command> parameter is:
-
-<programlisting>
-remote browse sync = <replaceable>a.b.c.d</replaceable>
-</programlisting>
-
-where <replaceable>a.b.c.d</replaceable> is either the IP address of the
-remote LMB or else is the network broadcast address of the remote segment.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>WINS - The Windows Internetworking Name Server</title>
-
-<para>
-Use of WINS (either Samba WINS _or_ MS Windows NT Server WINS) is highly
-recommended. Every NetBIOS machine registers it's name together with a
-name_type value for each of of several types of service it has available.
-eg: It registers it's name directly as a unique (the type 0x03) name.
-It also registers it's name if it is running the lanmanager compatible
-server service (used to make shares and printers available to other users)
-by registering the server (the type 0x20) name.
-</para>
-
-<para>
-All NetBIOS names are up to 15 characters in length. The name_type variable
-is added to the end of the name - thus creating a 16 character name. Any
-name that is shorter than 15 characters is padded with spaces to the 15th
-character. ie: All NetBIOS names are 16 characters long (including the
-name_type information).
-</para>
-
-<para>
-WINS can store these 16 character names as they get registered. A client
-that wants to log onto the network can ask the WINS server for a list
-of all names that have registered the NetLogon service name_type. This saves
-broadcast traffic and greatly expedites logon processing. Since broadcast
-name resolution can not be used across network segments this type of
-information can only be provided via WINS _or_ via statically configured
-<filename>lmhosts</filename> files that must reside on all clients in the
-absence of WINS.
-</para>
-
-<para>
-WINS also serves the purpose of forcing browse list synchronisation by all
-LMB's. LMB's must synchronise their browse list with the DMB (domain master
-browser) and WINS helps the LMB to identify it's DMB. By definition this
-will work only within a single workgroup. Note that the domain master browser
-has NOTHING to do with what is referred to as an MS Windows NT Domain. The
-later is a reference to a security environment while the DMB refers to the
-master controller for browse list information only.
-</para>
-
-<para>
-Use of WINS will work correctly only if EVERY client TCP/IP protocol stack
-has been configured to use the WINS server/s. Any client that has not been
-configured to use the WINS server will continue to use only broadcast based
-name registration so that WINS may NEVER get to know about it. In any case,
-machines that have not registered with a WINS server will fail name to address
-lookup attempts by other clients and will therefore cause workstation access
-errors.
-</para>
-
-<para>
-To configure Samba as a WINS server just add
-<command>wins support = yes</command> to the <filename>smb.conf</filename>
-file [globals] section.
-</para>
-
-<para>
-To configure Samba to register with a WINS server just add
-"wins server = a.b.c.d" to your smb.conf file [globals] section.
-</para>
-
-<important><para>
-Never use both <command>wins support = yes</command> together
-with <command>wins server = a.b.c.d</command>
-particularly not using it's own IP address.
-Specifying both will cause &nmbd; to refuse to start!
-</para></important>
-
-<sect2>
-<title>Setting up a WINS server</title>
-
-<para>
-Either a Samba machine or a Windows NT Server machine may be set up
-as a WINS server. To set a Samba machine to be a WINS server you must
-add the following option to the &smb.conf; file on the selected machine :
-in the [globals] section add the line
-</para>
-
-<para>
-<programlisting>
- wins support = yes
-</programlisting>
-</para>
-
-<para>
-Versions of Samba prior to 1.9.17 had this parameter default to
-yes. If you have any older versions of Samba on your network it is
-strongly suggested you upgrade to a recent version, or at the very
-least set the parameter to 'no' on all these machines.
-</para>
-
-<para>
-Machines with <command>wins support = yes</command> will keep a list of
-all NetBIOS names registered with them, acting as a DNS for NetBIOS names.
-</para>
-
-<para>
-You should set up only ONE wins server. Do NOT set the
-<command>wins support = yes</command> option on more than one Samba
-server.
-</para>
-
-<para>
-To set up a Windows NT Server as a WINS server you need to set up
-the WINS service - see your NT documentation for details. Note that
-Windows NT WINS Servers can replicate to each other, allowing more
-than one to be set up in a complex subnet environment. As Microsoft
-refuse to document these replication protocols Samba cannot currently
-participate in these replications. It is possible in the future that
-a Samba->Samba WINS replication protocol may be defined, in which
-case more than one Samba machine could be set up as a WINS server
-but currently only one Samba server should have the
-<command>wins support = yes</command> parameter set.
-</para>
-
-<para>
-After the WINS server has been configured you must ensure that all
-machines participating on the network are configured with the address
-of this WINS server. If your WINS server is a Samba machine, fill in
-the Samba machine IP address in the "Primary WINS Server" field of
-the "Control Panel->Network->Protocols->TCP->WINS Server" dialogs
-in Windows 95 or Windows NT. To tell a Samba server the IP address
-of the WINS server add the following line to the [global] section of
-all &smb.conf; files :
-</para>
-
-<para>
-<programlisting>
- wins server = &lt;name or IP address&gt;
-</programlisting>
-</para>
-
-<para>
-where &lt;name or IP address&gt; is either the DNS name of the WINS server
-machine or its IP address.
-</para>
-
-<para>
-Note that this line MUST NOT BE SET in the &smb.conf; file of the Samba
-server acting as the WINS server itself. If you set both the
-<command>wins support = yes</command> option and the
-<command>wins server = &lt;name&gt;</command> option then
-nmbd will fail to start.
-</para>
-
-<para>
-There are two possible scenarios for setting up cross subnet browsing.
-The first details setting up cross subnet browsing on a network containing
-Windows 95, Samba and Windows NT machines that are not configured as
-part of a Windows NT Domain. The second details setting up cross subnet
-browsing on networks that contain NT Domains.
-</para>
-
-</sect2>
-
-<sect2>
-<title>WINS Replication</title>
-
-<para>
-Samba-3 permits WINS replication through the use of the <filename>wrepld</filename> utility.
-This tool is not currently capable of being used as it is still in active development.
-As soon as this tool becomes moderately functional we will prepare man pages and enhance this
-section of the documentation to provide usage and technical details.
-</para>
-
-</sect2>
-<sect2>
-<title>Static WINS Entries</title>
-
-<para>
-New to Samba-3 is a tool called <filename>winsedit</filename> that may be used to add
-static WINS entries to the WINS database. This tool can be used also to modify entries
-existing in the WINS database.
-</para>
-
-<para>
-The development of the winsedit tool was made necessary due to the migration
-of the older style wins.dat file into a new tdb binary backend data store.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Helpful Hints</title>
-
-<para>
-The following hints should be carefully considered as they are stumbling points
-for many new network administrators.
-</para>
-
-<sect2>
-<title>Windows Networking Protocols</title>
-
-<warning><para>
-Do NOT use more than one (1) protocol on MS Windows machines
-</para></warning>
-
-<para>
-A very common cause of browsing problems results from installing more than
-one protocol on an MS Windows machine.
-</para>
-
-<para>
-Every NetBIOS machine takes part in a process of electing the LMB (and DMB)
-every 15 minutes. A set of election criteria is used to determine the order
-of precidence for winning this election process. A machine running Samba or
-Windows NT will be biased so that the most suitable machine will predictably
-win and thus retain it's role.
-</para>
-
-<para>
-The election process is "fought out" so to speak over every NetBIOS network
-interface. In the case of a Windows 9x machine that has both TCP/IP and IPX
-installed and has NetBIOS enabled over both protocols the election will be
-decided over both protocols. As often happens, if the Windows 9x machine is
-the only one with both protocols then the LMB may be won on the NetBIOS
-interface over the IPX protocol. Samba will then lose the LMB role as Windows
-9x will insist it knows who the LMB is. Samba will then cease to function
-as an LMB and thus browse list operation on all TCP/IP only machines will
-fail.
-</para>
-
-<para><emphasis>
-Windows 95, 98, 98se, Me are referred to generically as Windows 9x.
-The Windows NT4, 2000, XP and 2003 use common protocols. These are roughly
-referred to as the WinNT family, but it should be recognised that 2000 and
-XP/2003 introduce new protocol extensions that cause them to behave
-differently from MS Windows NT4. Generally, where a server does NOT support
-the newer or extended protocol, these will fall back to the NT4 protocols.
-</emphasis></para>
-
-<para>
-The safest rule of all to follow it this - USE ONLY ONE PROTOCOL!
-</para>
-
-</sect2>
-
-<sect2>
-<title>Name Resolution Order</title>
-
-<para>
-Resolution of NetBIOS names to IP addresses can take place using a number
-of methods. The only ones that can provide NetBIOS name_type information
-are:</para>
-
-<simplelist>
- <member>WINS: the best tool!</member>
- <member>LMHOSTS: is static and hard to maintain.</member>
- <member>Broadcast: uses UDP and can not resolve names across remote segments.</member>
-</simplelist>
-
-<para>
-Alternative means of name resolution includes:</para>
-<simplelist>
-<member>/etc/hosts: is static, hard to maintain, and lacks name_type info</member>
-<member>DNS: is a good choice but lacks essential name_type info.</member>
-</simplelist>
-
-<para>
-Many sites want to restrict DNS lookups and want to avoid broadcast name
-resolution traffic. The "name resolve order" parameter is of great help here.
-The syntax of the "name resolve order" parameter is:
-<programlisting>
-name resolve order = wins lmhosts bcast host
-</programlisting>
-_or_
-<programlisting>
-name resolve order = wins lmhosts (eliminates bcast and host)
-</programlisting>
-The default is:
-<programlisting>
-name resolve order = host lmhost wins bcast
-</programlisting>
-where "host" refers the the native methods used by the Unix system
-to implement the gethostbyname() function call. This is normally
-controlled by <filename>/etc/host.conf</filename>, <filename>/etc/nsswitch.conf</filename> and <filename>/etc/resolv.conf</filename>.
-</para>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Technical Overview of browsing</title>
-
-<para>
-SMB networking provides a mechanism by which clients can access a list
-of machines in a network, a so-called <command>browse list</command>. This list
-contains machines that are ready to offer file and/or print services
-to other machines within the network. Thus it does not include
-machines which aren't currently able to do server tasks. The browse
-list is heavily used by all SMB clients. Configuration of SMB
-browsing has been problematic for some Samba users, hence this
-document.
-</para>
-
-<para>
-MS Windows 2000 and later, as with Samba 3 and later, can be
-configured to not use NetBIOS over TCP/IP. When configured this way
-it is imperative that name resolution (using DNS/LDAP/ADS) be correctly
-configured and operative. Browsing will NOT work if name resolution
-from SMB machine names to IP addresses does not function correctly.
-</para>
-
-<para>
-Where NetBIOS over TCP/IP is enabled use of a WINS server is highly
-recommended to aid the resolution of NetBIOS (SMB) names to IP addresses.
-WINS allows remote segment clients to obtain NetBIOS name_type information
-that can NOT be provided by any other means of name resolution.
-</para>
-
-<sect2>
-<title>Browsing support in samba</title>
-
-<para>
-Samba facilitates browsing. The browsing is supported by &nmbd;
-and is also controlled by options in the &smb.conf; file.
-Samba can act as a local browse master for a workgroup and the ability
-to support domain logons and scripts is now available.
-</para>
-
-<para>
-Samba can also act as a domain master browser for a workgroup. This
-means that it will collate lists from local browse masters into a
-wide area network server list. In order for browse clients to
-resolve the names they may find in this list, it is recommended that
-both samba and your clients use a WINS server.
-</para>
-
-<para>
-Note that you should NOT set Samba to be the domain master for a
-workgroup that has the same name as an NT Domain: on each wide area
-network, you must only ever have one domain master browser per workgroup,
-regardless of whether it is NT, Samba or any other type of domain master
-that is providing this service.
-</para>
-
-<note><para>
-Nmbd can be configured as a WINS server, but it is not
-necessary to specifically use samba as your WINS server. MS Windows
-NT4, Server or Advanced Server 2000 or 2003 can be configured as
-your WINS server. In a mixed NT/2000/2003 server and samba environment on
-a Wide Area Network, it is recommended that you use the Microsoft
-WINS server capabilities. In a samba-only environment, it is
-recommended that you use one and only one Samba server as your WINS server.
-</para></note>
-
-<para>
-To get browsing to work you need to run nmbd as usual, but will need
-to use the <command>workgroup</command> option in &smb.conf;
-to control what workgroup Samba becomes a part of.
-</para>
-
-<para>
-Samba also has a useful option for a Samba server to offer itself for
-browsing on another subnet. It is recommended that this option is only
-used for 'unusual' purposes: announcements over the internet, for
-example. See <command>remote announce</command> in the
-&smb.conf; man page.
-</para>
-</sect2>
-
-<sect2>
-<title>Problem resolution</title>
-
-<para>
-If something doesn't work then hopefully the log.nmb file will help
-you track down the problem. Try a debug level of 2 or 3 for finding
-problems. Also note that the current browse list usually gets stored
-in text form in a file called <filename>browse.dat</filename>.
-</para>
-
-<para>
-Note that if it doesn't work for you, then you should still be able to
-type the server name as <filename>\\SERVER</filename> in filemanager then
-hit enter and filemanager should display the list of available shares.
-</para>
-
-<para>
-Some people find browsing fails because they don't have the global
-<command>guest account</command> set to a valid account. Remember that the
-IPC$ connection that lists the shares is done as guest, and thus you must
-have a valid guest account.
-</para>
-
-<para><emphasis>
-MS Windows 2000 and upwards (as with Samba) can be configured to disallow
-anonymous (ie: Guest account) access to the IPC$ share. In that case, the
-MS Windows 2000/XP/2003 machine acting as an SMB/CIFS client will use the
-name of the currently logged in user to query the IPC$ share. MS Windows
-9X clients are not able to do this and thus will NOT be able to browse
-server resources.
-</emphasis></para>
-
-<para>
-The other big problem people have is that their broadcast address,
-netmask or IP address is wrong (specified with the "interfaces" option
-in &smb.conf;)
-</para>
-</sect2>
-
-<sect2>
-<title>Browsing across subnets</title>
-<para>
-Since the release of Samba 1.9.17(alpha1) Samba has been
-updated to enable it to support the replication of browse lists
-across subnet boundaries. New code and options have been added to
-achieve this. This section describes how to set this feature up
-in different settings.
-</para>
-
-<para>
-To see browse lists that span TCP/IP subnets (ie. networks separated
-by routers that don't pass broadcast traffic) you must set up at least
-one WINS server. The WINS server acts as a DNS for NetBIOS names, allowing
-NetBIOS name to IP address translation to be done by doing a direct
-query of the WINS server. This is done via a directed UDP packet on
-port 137 to the WINS server machine. The reason for a WINS server is
-that by default, all NetBIOS name to IP address translation is done
-by broadcasts from the querying machine. This means that machines
-on one subnet will not be able to resolve the names of machines on
-another subnet without using a WINS server.
-</para>
-
-<para>
-Remember, for browsing across subnets to work correctly, all machines,
-be they Windows 95, Windows NT, or Samba servers must have the IP address
-of a WINS server given to them by a DHCP server, or by manual configuration
-(for Win95 and WinNT, this is in the TCP/IP Properties, under Network
-settings) for Samba this is in the &smb.conf; file.
-</para>
-
-<sect3>
-<title>How does cross subnet browsing work ?</title>
-
-<para>
-Cross subnet browsing is a complicated dance, containing multiple
-moving parts. It has taken Microsoft several years to get the code
-that achieves this correct, and Samba lags behind in some areas.
-Samba is capable of cross subnet browsing when configured correctly.
-</para>
-
-<para>
-Consider a network set up as follows :
-</para>
-
-<para>
-<programlisting>
- (DMB)
- N1_A N1_B N1_C N1_D N1_E
- | | | | |
- -------------------------------------------------------
- | subnet 1 |
- +---+ +---+
- |R1 | Router 1 Router 2 |R2 |
- +---+ +---+
- | |
- | subnet 2 subnet 3 |
- -------------------------- ------------------------------------
- | | | | | | | |
- N2_A N2_B N2_C N2_D N3_A N3_B N3_C N3_D
- (WINS)
-</programlisting>
-</para>
-
-<para>
-Consisting of 3 subnets (1, 2, 3) connected by two routers
-(R1, R2) - these do not pass broadcasts. Subnet 1 has 5 machines
-on it, subnet 2 has 4 machines, subnet 3 has 4 machines. Assume
-for the moment that all these machines are configured to be in the
-same workgroup (for simplicities sake). Machine N1_C on subnet 1
-is configured as Domain Master Browser (ie. it will collate the
-browse lists for the workgroup). Machine N2_D is configured as
-WINS server and all the other machines are configured to register
-their NetBIOS names with it.
-</para>
-
-<para>
-As all these machines are booted up, elections for master browsers
-will take place on each of the three subnets. Assume that machine
-N1_C wins on subnet 1, N2_B wins on subnet 2, and N3_D wins on
-subnet 3 - these machines are known as local master browsers for
-their particular subnet. N1_C has an advantage in winning as the
-local master browser on subnet 1 as it is set up as Domain Master
-Browser.
-</para>
-
-<para>
-On each of the three networks, machines that are configured to
-offer sharing services will broadcast that they are offering
-these services. The local master browser on each subnet will
-receive these broadcasts and keep a record of the fact that
-the machine is offering a service. This list of records is
-the basis of the browse list. For this case, assume that
-all the machines are configured to offer services so all machines
-will be on the browse list.
-</para>
-
-<para>
-For each network, the local master browser on that network is
-considered 'authoritative' for all the names it receives via
-local broadcast. This is because a machine seen by the local
-master browser via a local broadcast must be on the same
-network as the local master browser and thus is a 'trusted'
-and 'verifiable' resource. Machines on other networks that
-the local master browsers learn about when collating their
-browse lists have not been directly seen - these records are
-called 'non-authoritative'.
-</para>
-
-<para>
-At this point the browse lists look as follows (these are
-the machines you would see in your network neighborhood if
-you looked in it on a particular network right now).
-</para>
-
-<para>
-<programlisting>
-Subnet Browse Master List
------- ------------- ----
-Subnet1 N1_C N1_A, N1_B, N1_C, N1_D, N1_E
-
-Subnet2 N2_B N2_A, N2_B, N2_C, N2_D
-
-Subnet3 N3_D N3_A, N3_B, N3_C, N3_D
-</programlisting>
-</para>
-
-<para>
-Note that at this point all the subnets are separate, no
-machine is seen across any of the subnets.
-</para>
-
-<para>
-Now examine subnet 2. As soon as N2_B has become the local
-master browser it looks for a Domain master browser to synchronize
-its browse list with. It does this by querying the WINS server
-(N2_D) for the IP address associated with the NetBIOS name
-WORKGROUP&lt;1B&gt;. This name was registerd by the Domain master
-browser (N1_C) with the WINS server as soon as it was booted.
-</para>
-
-<para>
-Once N2_B knows the address of the Domain master browser it
-tells it that is the local master browser for subnet 2 by
-sending a MasterAnnouncement packet as a UDP port 138 packet.
-It then synchronizes with it by doing a NetServerEnum2 call. This
-tells the Domain Master Browser to send it all the server
-names it knows about. Once the domain master browser receives
-the MasterAnnouncement packet it schedules a synchronization
-request to the sender of that packet. After both synchronizations
-are done the browse lists look like :
-</para>
-
-<para>
-<programlisting>
-Subnet Browse Master List
------- ------------- ----
-Subnet1 N1_C N1_A, N1_B, N1_C, N1_D, N1_E,
- N2_A(*), N2_B(*), N2_C(*), N2_D(*)
-
-Subnet2 N2_B N2_A, N2_B, N2_C, N2_D
- N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
-
-Subnet3 N3_D N3_A, N3_B, N3_C, N3_D
-
-Servers with a (*) after them are non-authoritative names.
-</programlisting>
-</para>
-
-<para>
-At this point users looking in their network neighborhood on
-subnets 1 or 2 will see all the servers on both, users on
-subnet 3 will still only see the servers on their own subnet.
-</para>
-
-<para>
-The same sequence of events that occured for N2_B now occurs
-for the local master browser on subnet 3 (N3_D). When it
-synchronizes browse lists with the domain master browser (N1_A)
-it gets both the server entries on subnet 1, and those on
-subnet 2. After N3_D has synchronized with N1_C and vica-versa
-the browse lists look like.
-</para>
-
-<para>
-<programlisting>
-Subnet Browse Master List
------- ------------- ----
-Subnet1 N1_C N1_A, N1_B, N1_C, N1_D, N1_E,
- N2_A(*), N2_B(*), N2_C(*), N2_D(*),
- N3_A(*), N3_B(*), N3_C(*), N3_D(*)
-
-Subnet2 N2_B N2_A, N2_B, N2_C, N2_D
- N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
-
-Subnet3 N3_D N3_A, N3_B, N3_C, N3_D
- N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*),
- N2_A(*), N2_B(*), N2_C(*), N2_D(*)
-
-Servers with a (*) after them are non-authoritative names.
-</programlisting>
-</para>
-
-<para>
-At this point users looking in their network neighborhood on
-subnets 1 or 3 will see all the servers on all sunbets, users on
-subnet 2 will still only see the servers on subnets 1 and 2, but not 3.
-</para>
-
-<para>
-Finally, the local master browser for subnet 2 (N2_B) will sync again
-with the domain master browser (N1_C) and will recieve the missing
-server entries. Finally - and as a steady state (if no machines
-are removed or shut off) the browse lists will look like :
-</para>
-
-<para>
-<programlisting>
-Subnet Browse Master List
------- ------------- ----
-Subnet1 N1_C N1_A, N1_B, N1_C, N1_D, N1_E,
- N2_A(*), N2_B(*), N2_C(*), N2_D(*),
- N3_A(*), N3_B(*), N3_C(*), N3_D(*)
-
-Subnet2 N2_B N2_A, N2_B, N2_C, N2_D
- N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
- N3_A(*), N3_B(*), N3_C(*), N3_D(*)
-
-Subnet3 N3_D N3_A, N3_B, N3_C, N3_D
- N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*),
- N2_A(*), N2_B(*), N2_C(*), N2_D(*)
-
-Servers with a (*) after them are non-authoritative names.
-</programlisting>
-</para>
-
-<para>
-Synchronizations between the domain master browser and local
-master browsers will continue to occur, but this should be a
-steady state situation.
-</para>
-
-<para>
-If either router R1 or R2 fails the following will occur:
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- Names of computers on each side of the inaccessible network fragments
- will be maintained for as long as 36 minutes, in the network neighbourhood
- lists.
- </para>
-</listitem>
-
-<listitem>
- <para>
- Attempts to connect to these inaccessible computers will fail, but the
- names will not be removed from the network neighbourhood lists.
- </para>
-</listitem>
-
-<listitem>
- <para>
- If one of the fragments is cut off from the WINS server, it will only
- be able to access servers on its local subnet, by using subnet-isolated
- broadcast NetBIOS name resolution. The effects are similar to that of
- losing access to a DNS server.
- </para>
-</listitem>
-</orderedlist>
-</sect3>
-</sect2>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Other-Clients.sgml b/docs/docbook/projdoc/Other-Clients.sgml
deleted file mode 100644
index 068b9c0b32..0000000000
--- a/docs/docbook/projdoc/Other-Clients.sgml
+++ /dev/null
@@ -1,373 +0,0 @@
-<chapter id="Other-Clients">
-<chapterinfo>
- &author.jmcd;
- &author.jelmer;
-
- <pubdate>5 Mar 2001</pubdate>
-</chapterinfo>
-
-<title>Samba and other CIFS clients</title>
-
-<para>This chapter contains client-specific information.</para>
-
-<sect1>
-<title>Macintosh clients?</title>
-
-<para>
-Yes. <ulink url="http://www.thursby.com/">Thursby</ulink> now have a CIFS Client / Server called <ulink url="http://www.thursby.com/products/dave.html">DAVE</ulink>
-</para>
-
-<para>
-They test it against Windows 95, Windows NT and samba for
-compatibility issues. At the time of writing, DAVE was at version
-1.0.1. The 1.0.0 to 1.0.1 update is available as a free download from
-the Thursby web site (the speed of finder copies has been greatly
-enhanced, and there are bug-fixes included).
-</para>
-
-<para>
-Alternatives - There are two free implementations of AppleTalk for
-several kinds of UNIX machnes, and several more commercial ones.
-These products allow you to run file services and print services
-natively to Macintosh users, with no additional support required on
-the Macintosh. The two free omplementations are
-<ulink url="http://www.umich.edu/~rsug/netatalk/">Netatalk</ulink>, and
-<ulink url="http://www.cs.mu.oz.au/appletalk/atalk.html">CAP</ulink>.
-What Samba offers MS
-Windows users, these packages offer to Macs. For more info on these
-packages, Samba, and Linux (and other UNIX-based systems) see
-<ulink url="http://www.eats.com/linux_mac_win.html">http://www.eats.com/linux_mac_win.html</ulink>
-</para>
-
-</sect1>
-
-<sect1>
-<title>OS2 Client</title>
-
- <sect2>
- <title>How can I configure OS/2 Warp Connect or
- OS/2 Warp 4 as a client for Samba?</title>
-
- <para>A more complete answer to this question can be
- found on <ulink url="http://carol.wins.uva.nl/~leeuw/samba/warp.html">
- http://carol.wins.uva.nl/~leeuw/samba/warp.html</ulink>.</para>
-
- <para>Basically, you need three components:</para>
-
- <itemizedlist>
- <listitem><para>The File and Print Client ('IBM Peer')
- </para></listitem>
- <listitem><para>TCP/IP ('Internet support')
- </para></listitem>
- <listitem><para>The "NetBIOS over TCP/IP" driver ('TCPBEUI')
- </para></listitem>
- </itemizedlist>
-
- <para>Installing the first two together with the base operating
- system on a blank system is explained in the Warp manual. If Warp
- has already been installed, but you now want to install the
- networking support, use the "Selective Install for Networking"
- object in the "System Setup" folder.</para>
-
- <para>Adding the "NetBIOS over TCP/IP" driver is not described
- in the manual and just barely in the online documentation. Start
- MPTS.EXE, click on OK, click on "Configure LAPS" and click
- on "IBM OS/2 NETBIOS OVER TCP/IP" in 'Protocols'. This line
- is then moved to 'Current Configuration'. Select that line,
- click on "Change number" and increase it from 0 to 1. Save this
- configuration.</para>
-
- <para>If the Samba server(s) is not on your local subnet, you
- can optionally add IP names and addresses of these servers
- to the "Names List", or specify a WINS server ('NetBIOS
- Nameserver' in IBM and RFC terminology). For Warp Connect you
- may need to download an update for 'IBM Peer' to bring it on
- the same level as Warp 4. See the webpage mentioned above.</para>
- </sect2>
-
- <sect2>
- <title>How can I configure OS/2 Warp 3 (not Connect),
- OS/2 1.2, 1.3 or 2.x for Samba?</title>
-
- <para>You can use the free Microsoft LAN Manager 2.2c Client
- for OS/2 from
- <ulink url="ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/">
- ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/</ulink>.
- See <ulink url="http://carol.wins.uva.nl/~leeuw/lanman.html">
- http://carol.wins.uva.nl/~leeuw/lanman.html</ulink> for
- more information on how to install and use this client. In
- a nutshell, edit the file \OS2VER in the root directory of
- the OS/2 boot partition and add the lines:</para>
-
- <para><programlisting>
- 20=setup.exe
- 20=netwksta.sys
- 20=netvdd.sys
- </programlisting></para>
-
- <para>before you install the client. Also, don't use the
- included NE2000 driver because it is buggy. Try the NE2000
- or NS2000 driver from
- <ulink url="ftp://ftp.cdrom.com/pub/os2/network/ndis/">
- ftp://ftp.cdrom.com/pub/os2/network/ndis/</ulink> instead.
- </para>
- </sect2>
-
- <sect2>
- <title>Are there any other issues when OS/2 (any version)
- is used as a client?</title>
-
- <para>When you do a NET VIEW or use the "File and Print
- Client Resource Browser", no Samba servers show up. This can
- be fixed by a patch from <ulink
- url="http://carol.wins.uva.nl/~leeuw/samba/fix.html">
- http://carol.wins.uva.nl/~leeuw/samba/fix.html</ulink>.
- The patch will be included in a later version of Samba. It also
- fixes a couple of other problems, such as preserving long
- filenames when objects are dragged from the Workplace Shell
- to the Samba server. </para>
- </sect2>
-
- <sect2>
- <title>How do I get printer driver download working
- for OS/2 clients?</title>
-
- <para>First, create a share called [PRINTDRV] that is
- world-readable. Copy your OS/2 driver files there. Note
- that the .EA_ files must still be separate, so you will need
- to use the original install files, and not copy an installed
- driver from an OS/2 system.</para>
-
- <para>Install the NT driver first for that printer. Then,
- add to your smb.conf a parameter, os2 driver map =
- <replaceable>filename</replaceable>". Then, in the file
- specified by <replaceable>filename</replaceable>, map the
- name of the NT driver name to the OS/2 driver name as
- follows:</para>
-
- <para><command>nt driver name = os2 "driver
- name"."device name"</command>, e.g.:
- HP LaserJet 5L = LASERJET.HP LaserJet 5L</para>
-
- <para>You can have multiple drivers mapped in this file.</para>
-
- <para>If you only specify the OS/2 driver name, and not the
- device name, the first attempt to download the driver will
- actually download the files, but the OS/2 client will tell
- you the driver is not available. On the second attempt, it
- will work. This is fixed simply by adding the device name
- to the mapping, after which it will work on the first attempt.
- </para>
- </sect2>
-</sect1>
-
-<sect1>
-<title>Windows for Workgroups</title>
-
-<sect2>
-<title>Use latest TCP/IP stack from Microsoft</title>
-
-<para>Use the latest TCP/IP stack from microsoft if you use Windows
-for workgroups.
-</para>
-
-<para>The early TCP/IP stacks had lots of bugs.</para>
-
-<para>
-Microsoft has released an incremental upgrade to their TCP/IP 32-Bit
-VxD drivers. The latest release can be found on their ftp site at
-ftp.microsoft.com, located in /peropsys/windows/public/tcpip/wfwt32.exe.
-There is an update.txt file there that describes the problems that were
-fixed. New files include WINSOCK.DLL, TELNET.EXE, WSOCK.386, VNBT.386,
-WSTCP.386, TRACERT.EXE, NETSTAT.EXE, and NBTSTAT.EXE.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Delete .pwl files after password change</title>
-
-<para>
-WfWg does a lousy job with passwords. I find that if I change my
-password on either the unix box or the PC the safest thing to do is to
-delete the .pwl files in the windows directory. The PC will complain about not finding the files, but will soon get over it, allowing you to enter the new password.
-</para>
-
-<para>
-If you don't do this you may find that WfWg remembers and uses the old
-password, even if you told it a new one.
-</para>
-
-<para>
-Often WfWg will totally ignore a password you give it in a dialog box.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Configure WfW password handling</title>
-
-<para>
-There is a program call admincfg.exe
-on the last disk (disk 8) of the WFW 3.11 disk set. To install it
-type EXPAND A:\ADMINCFG.EX_ C:\WINDOWS\ADMINCFG.EXE Then add an icon
-for it via the "Progam Manager" "New" Menu. This program allows you
-to control how WFW handles passwords. ie disable Password Caching etc
-for use with <command>security = user</command>
-</para>
-
-</sect2>
-
-<sect2>
-<title>Case handling of passwords</title>
-
-<para>Windows for Workgroups uppercases the password before sending it to the server. Unix passwords can be case-sensitive though. Check the <ulink url="smb.conf.5.html">smb.conf(5)</ulink> information on <command>password level</command> to specify what characters samba should try to uppercase when checking.</para>
-
-</sect2>
-
-<sect2>
-<title>Use TCP/IP as default protocol</title>
-
-<para>To support print queue reporting you may find
-that you have to use TCP/IP as the default protocol under
-WfWg. For some reason if you leave Netbeui as the default
-it may break the print queue reporting on some systems.
-It is presumably a WfWg bug.</para>
-
-</sect2>
-
-<sect2>
-<title>Speed improvement</title>
-
-<para>
-Note that some people have found that setting DefaultRcvWindow in
-the [MSTCP] section of the SYSTEM.INI file under WfWg to 3072 gives a
-big improvement. I don't know why.
-</para>
-
-<para>
-My own experience wth DefaultRcvWindow is that I get much better
-performance with a large value (16384 or larger). Other people have
-reported that anything over 3072 slows things down enourmously. One
-person even reported a speed drop of a factor of 30 when he went from
-3072 to 8192. I don't know why.
-</para>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Windows '95/'98</title>
-
-<para>
-When using Windows 95 OEM SR2 the following updates are recommended where Samba
-is being used. Please NOTE that the above change will affect you once these
-updates have been installed.
-</para>
-
-<para>
-There are more updates than the ones mentioned here. You are referred to the
-Microsoft Web site for all currently available updates to your specific version
-of Windows 95.
-</para>
-
-<orderedlist>
-<listitem><para>Kernel Update: KRNLUPD.EXE</para></listitem>
-<listitem><para>Ping Fix: PINGUPD.EXE</para></listitem>
-<listitem><para>RPC Update: RPCRTUPD.EXE</para></listitem>
-<listitem><para>TCP/IP Update: VIPUPD.EXE</para></listitem>
-<listitem><para>Redirector Update: VRDRUPD.EXE</para></listitem>
-</orderedlist>
-
-<para>
-Also, if using MS OutLook it is desirable to install the OLEUPD.EXE fix. This
-fix may stop your machine from hanging for an extended period when exiting
-OutLook and you may also notice a significant speedup when accessing network
-neighborhood services.
-</para>
-
-<sect2>
-<title>Speed improvement</title>
-
-<para>
-Configure the win95 TCPIP registry settings to give better
-performance. I use a program called MTUSPEED.exe which I got off the
-net. There are various other utilities of this type freely available.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Windows 2000 Service Pack 2</title>
-
-<para>
-There are several annoyances with Windows 2000 SP2. One of which
-only appears when using a Samba server to host user profiles
-to Windows 2000 SP2 clients in a Windows domain. This assumes
-that Samba is a member of the domain, but the problem will
-likely occur if it is not.
-</para>
-
-<para>
-In order to server profiles successfully to Windows 2000 SP2
-clients (when not operating as a PDC), Samba must have
-<command>nt acl support = no</command>
-added to the file share which houses the roaming profiles.
-If this is not done, then the Windows 2000 SP2 client will
-complain about not being able to access the profile (Access
-Denied) and create multiple copies of it on disk (DOMAIN.user.001,
-DOMAIN.user.002, etc...). See the
-<ulink url="smb.conf.5.html">smb.conf(5)</ulink> man page
-for more details on this option. Also note that the
-<command>nt acl support</command> parameter was formally a global parameter in
-releases prior to Samba 2.2.2.
-</para>
-
-<para>
-The following is a minimal profile share:
-</para>
-
-<para><programlisting>
- [profile]
- path = /export/profile
- create mask = 0600
- directory mask = 0700
- nt acl support = no
- read only = no
-</programlisting></para>
-
-<para>
-The reason for this bug is that the Win2k SP2 client copies
-the security descriptor for the profile which contains
-the Samba server's SID, and not the domain SID. The client
-compares the SID for SAMBA\user and realizes it is
-different that the one assigned to DOMAIN\user. Hence the reason
-for the "access denied" message.
-</para>
-
-<para>
-By disabling the <command>nt acl support</command> parameter, Samba will send
-the Win2k client a response to the QuerySecurityDescriptor
-trans2 call which causes the client to set a default ACL
-for the profile. This default ACL includes
-</para>
-
-<para><command>DOMAIN\user "Full Control"</command></para>
-
-<note><para>This bug does not occur when using winbind to
-create accounts on the Samba host for Domain users.</para></note>
-
-</sect1>
-
-<sect1>
-<title>Windows NT 3.1</title>
-
-<para>If you have problems communicating across routers with Windows
-NT 3.1 workstations, read <ulink url="http://support.microsoft.com/default.aspx?scid=kb;[LN];Q103765">this Microsoft Knowledge Base article</ulink>.
-
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/PAM-Authentication-And-Samba.sgml b/docs/docbook/projdoc/PAM-Authentication-And-Samba.sgml
deleted file mode 100644
index 90a07a13bd..0000000000
--- a/docs/docbook/projdoc/PAM-Authentication-And-Samba.sgml
+++ /dev/null
@@ -1,389 +0,0 @@
-<chapter id="pam">
-<chapterinfo>
- &author.jht;
- <pubdate> (Jun 21 2001) </pubdate>
-</chapterinfo>
-
-<title>PAM Configuration for Centrally Managed Authentication</title>
-
-<sect1>
-<title>Samba and PAM</title>
-
-<para>
-A number of Unix systems (eg: Sun Solaris), as well as the
-xxxxBSD family and Linux, now utilize the Pluggable Authentication
-Modules (PAM) facility to provide all authentication,
-authorization and resource control services. Prior to the
-introduction of PAM, a decision to use an alternative to
-the system password database (<filename>/etc/passwd</filename>)
-would require the provision of alternatives for all programs that provide
-security services. Such a choice would involve provision of
-alternatives to such programs as: <command>login</command>,
-<command>passwd</command>, <command>chown</command>, etc.
-</para>
-
-<para>
-PAM provides a mechanism that disconnects these security programs
-from the underlying authentication/authorization infrastructure.
-PAM is configured either through one file <filename>/etc/pam.conf</filename> (Solaris),
-or by editing individual files that are located in <filename>/etc/pam.d</filename>.
-</para>
-
-<note>
- <para>
- If the PAM authentication module (loadable link library file) is located in the
- default location then it is not necessary to specify the path. In the case of
- Linux, the default location is <filename>/lib/security</filename>. If the module
- is located outside the default then the path must be specified as:
-
- <programlisting>
- auth required /other_path/pam_strange_module.so
- </programlisting>
- </para>
-</note>
-
-<para>
-The following is an example <filename>/etc/pam.d/login</filename> configuration file.
-This example had all options been uncommented is probably not usable
-as it stacks many conditions before allowing successful completion
-of the login process. Essentially all conditions can be disabled
-by commenting them out except the calls to <filename>pam_pwdb.so</filename>.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # The PAM configuration file for the `login' service
- #
- auth required pam_securetty.so
- auth required pam_nologin.so
- # auth required pam_dialup.so
- # auth optional pam_mail.so
- auth required pam_pwdb.so shadow md5
- # account requisite pam_time.so
- account required pam_pwdb.so
- session required pam_pwdb.so
- # session optional pam_lastlog.so
- # password required pam_cracklib.so retry=3
- password required pam_pwdb.so shadow md5
-</programlisting></para>
-
-<para>
-PAM allows use of replacable modules. Those available on a
-sample system include:
-</para>
-
-<para><prompt>$</prompt><userinput>/bin/ls /lib/security</userinput>
-<programlisting>
- pam_access.so pam_ftp.so pam_limits.so
- pam_ncp_auth.so pam_rhosts_auth.so pam_stress.so
- pam_cracklib.so pam_group.so pam_listfile.so
- pam_nologin.so pam_rootok.so pam_tally.so
- pam_deny.so pam_issue.so pam_mail.so
- pam_permit.so pam_securetty.so pam_time.so
- pam_dialup.so pam_lastlog.so pam_mkhomedir.so
- pam_pwdb.so pam_shells.so pam_unix.so
- pam_env.so pam_ldap.so pam_motd.so
- pam_radius.so pam_smbpass.so pam_unix_acct.so
- pam_wheel.so pam_unix_auth.so pam_unix_passwd.so
- pam_userdb.so pam_warn.so pam_unix_session.so
-</programlisting></para>
-
-<para>
-The following example for the login program replaces the use of
-the <filename>pam_pwdb.so</filename> module which uses the system
-password database (<filename>/etc/passwd</filename>,
-<filename>/etc/shadow</filename>, <filename>/etc/group</filename>) with
-the module <filename>pam_smbpass.so</filename> which uses the Samba
-database which contains the Microsoft MD4 encrypted password
-hashes. This database is stored in either
-<filename>/usr/local/samba/private/smbpasswd</filename>,
-<filename>/etc/samba/smbpasswd</filename>, or in
-<filename>/etc/samba.d/smbpasswd</filename>, depending on the
-Samba implementation for your Unix/Linux system. The
-<filename>pam_smbpass.so</filename> module is provided by
-Samba version 2.2.1 or later. It can be compiled by specifying the
-<command>--with-pam_smbpass</command> options when running Samba's
-<filename>configure</filename> script. For more information
-on the <filename>pam_smbpass</filename> module, see the documentation
-in the <filename>source/pam_smbpass</filename> directory of the Samba
-source distribution.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # The PAM configuration file for the `login' service
- #
- auth required pam_smbpass.so nodelay
- account required pam_smbpass.so nodelay
- session required pam_smbpass.so nodelay
- password required pam_smbpass.so nodelay
-</programlisting></para>
-
-<para>
-The following is the PAM configuration file for a particular
-Linux system. The default condition uses <filename>pam_pwdb.so</filename>.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # The PAM configuration file for the `samba' service
- #
- auth required pam_pwdb.so nullok nodelay shadow audit
- account required pam_pwdb.so audit nodelay
- session required pam_pwdb.so nodelay
- password required pam_pwdb.so shadow md5
-</programlisting></para>
-
-<para>
-In the following example the decision has been made to use the
-smbpasswd database even for basic samba authentication. Such a
-decision could also be made for the passwd program and would
-thus allow the smbpasswd passwords to be changed using the passwd
-program.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # The PAM configuration file for the `samba' service
- #
- auth required pam_smbpass.so nodelay
- account required pam_pwdb.so audit nodelay
- session required pam_pwdb.so nodelay
- password required pam_smbpass.so nodelay smbconf=/etc/samba.d/smb.conf
-</programlisting></para>
-
-<note><para>PAM allows stacking of authentication mechanisms. It is
-also possible to pass information obtained within one PAM module through
-to the next module in the PAM stack. Please refer to the documentation for
-your particular system implementation for details regarding the specific
-capabilities of PAM in this environment. Some Linux implmentations also
-provide the <filename>pam_stack.so</filename> module that allows all
-authentication to be configured in a single central file. The
-<filename>pam_stack.so</filename> method has some very devoted followers
-on the basis that it allows for easier administration. As with all issues in
-life though, every decision makes trade-offs, so you may want examine the
-PAM documentation for further helpful information.
-</para></note>
-
-<sect2>
-<title>PAM Configuration in smb.conf</title>
-
-<para>
-There is an option in smb.conf called <ulink
-url="smb.conf.5.html#OBEYPAMRESTRICTIONS">obey pam restrictions</ulink>.
-The following is from the on-line help for this option in SWAT;
-</para>
-
-<para>
-When Samba is configured to enable PAM support (i.e.
-<constant>--with-pam</constant>), this parameter will
-control whether or not Samba should obey PAM's account
-and session management directives. The default behavior
-is to use PAM for clear text authentication only and to
-ignore any account or session management. Note that Samba always
-ignores PAM for authentication in the case of
-<ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">encrypt passwords = yes</ulink>.
-The reason is that PAM modules cannot support the challenge/response
-authentication mechanism needed in the presence of SMB
-password encryption.
-</para>
-
-<para>Default: <command>obey pam restrictions = no</command></para>
-
-</sect2>
-
-<sect2>
-<title>Password Synchronisation using pam_smbpass.so</title>
-
-<para>
-pam_smbpass is a PAM module which can be used on conforming systems to
-keep the smbpasswd (Samba password) database in sync with the unix
-password file. PAM (Pluggable Authentication Modules) is an API supported
-under some Unices, such as Solaris, HPUX and Linux, that provides a
-generic interface to authentication mechanisms.
-</para>
-
-<para>
-For more information on PAM, see http://ftp.kernel.org/pub/linux/libs/pam/
-</para>
-
-<para>
-This module authenticates a local smbpasswd user database. If you require
-support for authenticating against a remote SMB server, or if you're
-concerned about the presence of suid root binaries on your system, it is
-recommended that you use pam_winbind instead.
-</para>
-
-<para><programlisting>
-Options recognized by this module are as follows:
-
- debug - log more debugging info
- audit - like debug, but also logs unknown usernames
- use_first_pass - don't prompt the user for passwords;
- take them from PAM_ items instead
- try_first_pass - try to get the password from a previous
- PAM module, fall back to prompting the user
- use_authtok - like try_first_pass, but *fail* if the new
- PAM_AUTHTOK has not been previously set.
- (intended for stacking password modules only)
- not_set_pass - don't make passwords used by this module
- available to other modules.
- nodelay - don't insert ~1 second delays on authentication
- failure.
- nullok - null passwords are allowed.
- nonull - null passwords are not allowed. Used to
- override the Samba configuration.
- migrate - only meaningful in an "auth" context;
- used to update smbpasswd file with a
- password used for successful authentication.
- smbconf=&lt file &gt - specify an alternate path to the smb.conf
- file.
-</programlisting></para>
-
-<para><programlisting>
-Thanks go to the following people:
-
- * Andrew Morgan &lt morgan@transmeta.com &gt, for providing the Linux-PAM
- framework, without which none of this would have happened
-
- * Christian Gafton &lt gafton@redhat.com &gt and Andrew Morgan again, for the
- pam_pwdb module upon which pam_smbpass was originally based
-
- * Luke Leighton &lt lkcl@switchboard.net &gt for being receptive to the idea,
- and for the occasional good-natured complaint about the project's status
- that keep me working on it :)
-
- * and of course, all the other members of the Samba team
- &lt http://www.samba.org/samba/team.html &gt, for creating a great product
- and for giving this project a purpose
-
- ---------------------
- Stephen Langasek &lt vorlon@netexpress.net &gt
-</programlisting></para>
-
-<para>
-The following are examples of the use of pam_smbpass.so in the format of Linux
-<filename>/etc/pam.d/</filename> files structure. Those wishing to implement this
-tool on other platforms will need to adapt this appropriately.
-</para>
-
-<sect3>
-<title>Password Synchonisation Configuration</title>
-
-<para>
-A sample PAM configuration that shows the use of pam_smbpass to make
-sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow)
-is changed. Useful when an expired password might be changed by an
-application (such as ssh).
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # password-sync
- #
- auth requisite pam_nologin.so
- auth required pam_unix.so
- account required pam_unix.so
- password requisite pam_cracklib.so retry=3
- password requisite pam_unix.so shadow md5 use_authtok try_first_pass
- password required pam_smbpass.so nullok use_authtok try_first_pass
- session required pam_unix.so
-</programlisting></para>
-</sect3>
-
-<sect3>
-<title>Password Migration Configuration</title>
-
-<para>
-A sample PAM configuration that shows the use of pam_smbpass to migrate
-from plaintext to encrypted passwords for Samba. Unlike other methods,
-this can be used for users who have never connected to Samba shares:
-password migration takes place when users ftp in, login using ssh, pop
-their mail, etc.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # password-migration
- #
- auth requisite pam_nologin.so
- # pam_smbpass is called IFF pam_unix succeeds.
- auth requisite pam_unix.so
- auth optional pam_smbpass.so migrate
- account required pam_unix.so
- password requisite pam_cracklib.so retry=3
- password requisite pam_unix.so shadow md5 use_authtok try_first_pass
- password optional pam_smbpass.so nullok use_authtok try_first_pass
- session required pam_unix.so
-</programlisting></para>
-</sect3>
-
-<sect3>
-<title>Mature Password Configuration</title>
-
-<para>
-A sample PAM configuration for a 'mature' smbpasswd installation.
-private/smbpasswd is fully populated, and we consider it an error if
-the smbpasswd doesn't exist or doesn't match the Unix password.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # password-mature
- #
- auth requisite pam_nologin.so
- auth required pam_unix.so
- account required pam_unix.so
- password requisite pam_cracklib.so retry=3
- password requisite pam_unix.so shadow md5 use_authtok try_first_pass
- password required pam_smbpass.so use_authtok use_first_pass
- session required pam_unix.so
-</programlisting></para>
-</sect3>
-
-<sect3>
-<title>Kerberos Password Integration Configuration</title>
-
-<para>
-A sample PAM configuration that shows pam_smbpass used together with
-pam_krb5. This could be useful on a Samba PDC that is also a member of
-a Kerberos realm.
-</para>
-
-<para><programlisting>
- #%PAM-1.0
- # kdc-pdc
- #
- auth requisite pam_nologin.so
- auth requisite pam_krb5.so
- auth optional pam_smbpass.so migrate
- account required pam_krb5.so
- password requisite pam_cracklib.so retry=3
- password optional pam_smbpass.so nullok use_authtok try_first_pass
- password required pam_krb5.so use_authtok try_first_pass
- session required pam_krb5.so
-</programlisting></para>
-</sect3>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Distributed Authentication</title>
-
-<para>
-The astute administrator will realize from this that the
-combination of <filename>pam_smbpass.so</filename>,
-<command>winbindd</command>, and a distributed
-passdb backend, such as ldap, will allow the establishment of a
-centrally managed, distributed
-user/password database that can also be used by all
-PAM (eg: Linux) aware programs and applications. This arrangement
-can have particularly potent advantages compared with the
-use of Microsoft Active Directory Service (ADS) in so far as
-reduction of wide area network authentication traffic.
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/PolicyMgmt.sgml b/docs/docbook/projdoc/PolicyMgmt.sgml
deleted file mode 100644
index 333fe6ad0b..0000000000
--- a/docs/docbook/projdoc/PolicyMgmt.sgml
+++ /dev/null
@@ -1,385 +0,0 @@
-<chapter id="PolicyMgmt">
-<chapterinfo>
- &author.jht;
- <pubdate>April 3 2003</pubdate>
-</chapterinfo>
-<title>System and Account Policies</title>
-
-<sect1>
-<title>Creating and Managing System Policies</title>
-
-<para>
-Under MS Windows platforms, particularly those following the release of MS Windows
-NT4 and MS Windows 95) it is possible to create a type of file that would be placed
-in the NETLOGON share of a domain controller. As the client logs onto the network
-this file is read and the contents initiate changes to the registry of the client
-machine. This file allows changes to be made to those parts of the registry that
-affect users, groups of users, or machines.
-</para>
-
-<para>
-For MS Windows 9x/Me this file must be called <filename>Config.POL</filename> and may
-be generated using a tool called <filename>poledit.exe</filename>, better known as the
-Policy Editor. The policy editor was provided on the Windows 98 installation CD, but
-dissappeared again with the introduction of MS Windows Me (Millenium Edition). From
-comments from MS Windows network administrators it would appear that this tool became
-a part of the MS Windows Me Resource Kit.
-</para>
-
-<para>
-MS Windows NT4 Server products include the <emphasis>System Policy Editor</emphasis>
-under the <filename>Start -> Programs -> Administrative Tools</filename> menu item.
-For MS Windows NT4 and later clients this file must be called <filename>NTConfig.POL</filename>.
-</para>
-
-<para>
-New with the introduction of MS Windows 2000 was the Microsoft Management Console
-or MMC. This tool is the new wave in the ever changing landscape of Microsoft
-methods for management of network access and security. Every new Microsoft product
-or technology seems to obsolete the old rules and to introduce newer and more
-complex tools and methods. To Microsoft's credit though, the MMC does appear to
-be a step forward, but improved functionality comes at a great price.
-</para>
-
-<para>
-Before embarking on the configuration of network and system policies it is highly
-advisable to read the documentation available from Microsoft's web site regarding
-<ulink url="http://www.microsoft.com/ntserver/management/deployment/planguide/prof_policies.asp">
-Implementing Profiles and Policies in Windows NT 4.0 from http://www.microsoft.com/ntserver/management/deployment/planguide/prof_policies.asp</ulink> available from Microsoft.
-There are a large number of documents in addition to this old one that should also
-be read and understood. Try searching on the Microsoft web site for "Group Policies".
-</para>
-
-<para>
-What follows is a very brief discussion with some helpful notes. The information provided
-here is incomplete - you are warned.
-</para>
-
-<sect2>
-<title>Windows 9x/Me Policies</title>
-
-<para>
-You need the Win98 Group Policy Editor to set Group Profiles up under Windows 9x/Me.
-It can be found on the Original full product Win98 installation CD under
-<filename>tools/reskit/netadmin/poledit</filename>. Install this using the
-Add/Remove Programs facility and then click on the 'Have Disk' tab.
-</para>
-
-<para>
-Use the Group Policy Editor to create a policy file that specifies the location of
-user profiles and/or the <filename>My Documents</filename> etc. stuff. Then
-save these settings in a file called <filename>Config.POL</filename> that needs to
-be placed in the root of the [NETLOGON] share. If Win98 is configured to log onto
-the Samba Domain, it will automatically read this file and update the Win9x/Me registry
-of the machine as it logs on.
-</para>
-
-<para>
-Further details are covered in the Win98 Resource Kit documentation.
-</para>
-
-<para>
-If you do not take the right steps, then every so often Win9x/Me will check the
-integrity of the registry and will restore it's settings from the back-up
-copy of the registry it stores on each Win9x/Me machine. Hence, you will
-occasionally notice things changing back to the original settings.
-</para>
-
-<para>
-Install the group policy handler for Win9x to pick up group policies. Look on the
-Win98 CD in <filename>\tools\reskit\netadmin\poledit</filename>.
-Install group policies on a Win9x client by double-clicking
-<filename>grouppol.inf</filename>. Log off and on again a couple of times and see
-if Win98 picks up group policies. Unfortunately this needs to be done on every
-Win9x/Me machine that uses group policies.
-</para>
-
-</sect2>
-<sect2>
-<title>Windows NT4 Style Policy Files</title>
-
-<para>
-To create or edit <filename>ntconfig.pol</filename> you must use the NT Server
-Policy Editor, <command>poledit.exe</command> which is included with NT4 Server
-but <emphasis>not NT Workstation</emphasis>. There is a Policy Editor on a NT4
-Workstation but it is not suitable for creating <emphasis>Domain Policies</emphasis>.
-Further, although the Windows 95 Policy Editor can be installed on an NT4
-Workstation/Server, it will not work with NT clients. However, the files from
-the NT Server will run happily enough on an NT4 Workstation.
-</para>
-
-<para>
-You need <filename>poledit.exe, common.adm</filename> and <filename>winnt.adm</filename>.
-It is convenient to put the two *.adm files in the <filename>c:\winnt\inf</filename>
-directory which is where the binary will look for them unless told otherwise. Note also that that
-directory is normally 'hidden'.
-</para>
-
-<para>
-The Windows NT policy editor is also included with the Service Pack 3 (and
-later) for Windows NT 4.0. Extract the files using <command>servicepackname /x</command>,
-i.e. that's <command>Nt4sp6ai.exe /x</command> for service pack 6a. The policy editor,
-<command>poledit.exe</command> and the associated template files (*.adm) should
-be extracted as well. It is also possible to downloaded the policy template
-files for Office97 and get a copy of the policy editor. Another possible
-location is with the Zero Administration Kit available for download from Microsoft.
-</para>
-
-<sect3>
-<title>Registry Tattoos</title>
-
- <para>
- With NT4 style registry based policy changes, a large number of settings are not
- automatically reversed as the user logs off. Since the settings that were in the
- NTConfig.POL file were applied to the client machine registry and that apply to the
- hive key HKEY_LOCAL_MACHINE are permanent until explicitly reversed. This is known
- as tattooing. It can have serious consequences down-stream and the administrator must
- be extremely careful not to lock out the ability to manage the machine at a later date.
- </para>
-
-
-</sect3>
-</sect2>
-<sect2>
-<title>MS Windows 200x / XP Professional Policies</title>
-
-<para>
-Windows NT4 System policies allows setting of registry parameters specific to
-users, groups and computers (client workstations) that are members of the NT4
-style domain. Such policy file will work with MS Windows 2000 / XP clients also.
-</para>
-
-<para>
-New to MS Windows 2000 Microsoft introduced a new style of group policy that confers
-a superset of capabilities compared with NT4 style policies. Obviously, the tool used
-to create them is different, and the mechanism for implementing them is much changed.
-</para>
-
-<para>
-The older NT4 style registry based policies are known as <emphasis>Administrative Templates</emphasis>
-in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes ability to set various security
-configurations, enforce Internet Explorer browser settings, change and redirect aspects of the
-users' desktop (including: the location of <emphasis>My Documents</emphasis> files (directory), as
-well as intrinsics of where menu items will appear in the Start menu). An additional new
-feature is the ability to make available particular software Windows applications to particular
-users and/or groups.
-</para>
-
-<para>
-Remember: NT4 policy files are named <filename>NTConfig.POL</filename> and are stored in the root
-of the NETLOGON share on the domain controllers. A Windows NT4 user enters a username, a password
-and selects the domain name to which the logon will attempt to take place. During the logon
-process the client machine reads the NTConfig.POL file from the NETLOGON share on the authenticating
-server, modifies the local registry values according to the settings in this file.
-</para>
-
-<para>
-Windows 2K GPOs are very feature rich. They are NOT stored in the NETLOGON share, rather part of
-a Windows 200x policy file is stored in the Active Directory itself and the other part is stored
-in a shared (and replicated) volume called the SYSVOL folder. This folder is present on all Active
-Directory domain controllers. The part that is stored in the Active Directory itself is called the
-group policy container (GPC), and the part that is stored in the replicated share called SYSVOL is
-known as the group policy template (GPT).
-</para>
-
-<para>
-With NT4 clients the policy file is read and executed upon only as each user logs onto the network.
-MS Windows 200x policies are much more complex - GPOs are processed and applied at client machine
-startup (machine specific part) and when the user logs onto the network the user specific part
-is applied. In MS Windows 200x style policy management each machine and/or user may be subject
-to any number of concurently applicable (and applied) policy sets (GPOs). Active Directory allows
-the administrator to also set filters over the policy settings. No such equivalent capability
-exists with NT4 style policy files.
-</para>
-
-<sect3>
-<title>Administration of Win2K / XP Policies</title>
-
-<procedure>
-<title>Instructions</title>
-<para>
-Instead of using the tool called "The System Policy Editor", commonly called Poledit (from the
-executable name poledit.exe), GPOs are created and managed using a Microsoft Management Console
-(MMC) snap-in as follows:</para>
-
-<step>
-<para>
-Go to the Windows 200x / XP menu <filename>Start->Programs->Administrative Tools</filename>
- and select the MMC snap-in called "Active Directory Users and Computers"
-</para>
-</step>
-
-<step><para>
-Select the domain or organizational unit (OU) that you wish to manage, then right click
-to open the context menu for that object, select the properties item.
-</para></step>
-
-<step><para>
-Now left click on the Group Policy tab, then left click on the New tab. Type a name
-for the new policy you will create.
-</para></step>
-
-<step><para>
-Now left click on the Edit tab to commence the steps needed to create the GPO.
-</para></step>
-</procedure>
-
-<para>
-All policy configuration options are controlled through the use of policy administrative
-templates. These files have a .adm extension, both in NT4 as well as in Windows 200x / XP.
-Beware however, since the .adm files are NOT interchangible across NT4 and Windows 200x.
-The later introduces many new features as well as extended definition capabilities. It is
-well beyond the scope of this documentation to explain how to program .adm files, for that
-the adminsitrator is referred to the Microsoft Windows Resource Kit for your particular
-version of MS Windows.
-</para>
-
-<note>
-<para>
-The MS Windows 2000 Resource Kit contains a tool called gpolmig.exe. This tool can be used
-to migrate an NT4 NTConfig.POL file into a Windows 200x style GPO. Be VERY careful how you
-use this powerful tool. Please refer to the resource kit manuals for specific usage information.
-</para>
-</note>
-
-</sect3>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Managing Account/User Policies</title>
-
-<para>
-Policies can define a specific user's settings or the settings for a group of users. The resulting
-policy file contains the registry settings for all users, groups, and computers that will be using
-the policy file. Separate policy files for each user, group, or computer are not not necessary.
-</para>
-
-<para>
-If you create a policy that will be automatically downloaded from validating domain controllers,
-you should name the file NTconfig.POL. As system administrator, you have the option of renaming the
-policy file and, by modifying the Windows NT-based workstation, directing the computer to update
-the policy from a manual path. You can do this by either manually changing the registry or by using
-the System Policy Editor. This path can even be a local path such that each machine has its own policy file,
-but if a change is necessary to all machines, this change must be made individually to each workstation.
-</para>
-
-<para>
-When a Windows NT4/200x/XP machine logs onto the network the NETLOGON share on the authenticating domain
-controller for the presence of the NTConfig.POL file. If one exists it is downloaded, parsed and then
-applied to the user's part of the registry.
-</para>
-
-<para>
-MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally,
-acquire policy settings through Group Policy Objects (GPOs) that are defined and stored in Active Directory
-itself. The key benefit of using AS GPOs is that they impose no registry <emphasis>tatooing</emphasis> effect.
-This has considerable advanage compared with the use of NTConfig.POL (NT4) style policy updates.
-</para>
-
-<para>
-In addition to user access controls that may be imposed or applied via system and/or group policies
-in a manner that works in conjunction with user profiles, the user management environment under
-MS Windows NT4/200x/XP allows per domain as well as per user account restrictions to be applied.
-Common restrictions that are frequently used includes:
-</para>
-
-<para>
-<simplelist>
- <member>Logon Hours</member>
- <member>Password Aging</member>
- <member>Permitted Logon from certain machines only</member>
- <member>Account type (Local or Global)</member>
- <member>User Rights</member>
-</simplelist>
-</para>
-
-<sect2>
-<title>With Windows NT4/200x</title>
-
-<para>
-The tools that may be used to configure these types of controls from the MS Windows environment are:
-The NT4 User Manager for domains, the NT4 System and Group Policy Editor, the registry editor (regedt32.exe).
-Under MS Windows 200x/XP this is done using the Microsoft Managment Console (MMC) with approapriate
-"snap-ins", the registry editor, and potentially also the NT4 System and Group Policy Editor.
-</para>
-</sect2>
-
-<sect2>
-<title>With a Samba PDC</title>
-
-<para>
-With a Samba Domain Controller, the new tools for managing of user account and policy information includes:
-<filename>smbpasswd, pdbedit, net, rpcclient.</filename>. The administrator should read the
-man pages for these tools and become familiar with their use.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>System Startup and Logon Processing Overview</title>
-
-<para>
-The following attempts to document the order of processing of system and user policies following a system
-reboot and as part of the user logon:
-</para>
-
-<orderedlist>
- <listitem><para>
- Network starts, then Remote Procedure Call System Service (RPCSS) and Multiple Universal Naming
- Convention Provider (MUP) start
- </para></listitem>
-
- <listitem><para>
- Where Active Directory is involved, an ordered list of Group Policy Objects (GPOs) is downloaded
- and applied. The list may include GPOs that:
-<simplelist>
- <member>Apply to the location of machines in a Directory</member>
- <member>Apply only when settings have changed</member>
- <member>Depend on configuration of scope of applicability: local, site, domain, organizational unit, etc.</member>
-</simplelist>
- No desktop user interface is presented until the above have been processed.
- </para></listitem>
-
- <listitem><para>
- Execution of start-up scripts (hidden and synchronous by defaut).
- </para></listitem>
-
- <listitem><para>
- A keyboard action to affect start of logon (Ctrl-Alt-Del).
- </para></listitem>
-
- <listitem><para>
- User credentials are validated, User profile is loaded (depends on policy settings).
- </para></listitem>
-
- <listitem><para>
- An ordered list of User GPOs is obtained. The list contents depends on what is configured in respsect of:
-
-<simplelist>
- <member>Is user a domain member, thus subject to particular policies</member>
- <member>Loopback enablement, and the state of the loopback policy (Merge or Replace)</member>
- <member>Location of the Active Directory itself</member>
- <member>Has the list of GPOs changed. No processing is needed if not changed.</member>
-</simplelist>
- </para></listitem>
-
- <listitem><para>
- User Policies are applied from Active Directory. Note: There are several types.
- </para></listitem>
-
- <listitem><para>
- Logon scripts are run. New to Win2K and Active Directory, logon scripts may be obtained based on Group
- Policy objects (hidden and executed synchronously). NT4 style logon scripts are then run in a normal
- window.
- </para></listitem>
-
- <listitem><para>
- The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like and NT4
- Domain) machine (system) policies are applied at start-up, User policies are applied at logon.
- </para></listitem>
-</orderedlist>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Portability.sgml b/docs/docbook/projdoc/Portability.sgml
deleted file mode 100644
index 72c3d20547..0000000000
--- a/docs/docbook/projdoc/Portability.sgml
+++ /dev/null
@@ -1,235 +0,0 @@
-<chapter id="Portability">
-<chapterinfo>
- &author.jelmer;
-</chapterinfo>
-
-<title>Portability</title>
-
-<para>Samba works on a wide range of platforms but the interface all the
-platforms provide is not always compatible. This chapter contains
-platform-specific information about compiling and using samba.</para>
-
-<sect1>
-<title>HPUX</title>
-
-<para>
-HP's implementation of supplementary groups is, er, non-standard (for
-hysterical reasons). There are two group files, /etc/group and
-/etc/logingroup; the system maps UIDs to numbers using the former, but
-initgroups() reads the latter. Most system admins who know the ropes
-symlink /etc/group to /etc/logingroup (hard link doesn't work for reasons
-too stupid to go into here). initgroups() will complain if one of the
-groups you're in in /etc/logingroup has what it considers to be an invalid
-ID, which means outside the range [0..UID_MAX], where UID_MAX is (I think)
-60000 currently on HP-UX. This precludes -2 and 65534, the usual 'nobody'
-GIDs.
-</para>
-
-<para>
-If you encounter this problem, make sure that the programs that are failing
-to initgroups() be run as users not in any groups with GIDs outside the
-allowed range.
-</para>
-
-<para>This is documented in the HP manual pages under setgroups(2) and passwd(4).
-</para>
-
-<para>
-On HPUX you must use gcc or the HP Ansi compiler. The free compiler
-that comes with HP-UX is not Ansi compliant and cannot compile
-Samba.
-</para>
-
-</sect1>
-
-<sect1>
-<title>SCO Unix</title>
-
-<para>
-If you run an old version of SCO Unix then you may need to get important
-TCP/IP patches for Samba to work correctly. Without the patch, you may
-encounter corrupt data transfers using samba.
-</para>
-
-<para>
-The patch you need is UOD385 Connection Drivers SLS. It is available from
-SCO (ftp.sco.com, directory SLS, files uod385a.Z and uod385a.ltr.Z).
-</para>
-
-</sect1>
-
-<sect1>
-<title>DNIX</title>
-
-<para>
-DNIX has a problem with seteuid() and setegid(). These routines are
-needed for Samba to work correctly, but they were left out of the DNIX
-C library for some reason.
-</para>
-
-<para>
-For this reason Samba by default defines the macro NO_EID in the DNIX
-section of includes.h. This works around the problem in a limited way,
-but it is far from ideal, some things still won't work right.
-</para>
-
-<para>
-To fix the problem properly you need to assemble the following two
-functions and then either add them to your C library or link them into
-Samba.
-</para>
-
-<para>
-put this in the file <filename>setegid.s</filename>:
-</para>
-
-<para><programlisting>
- .globl _setegid
-_setegid:
- moveq #47,d0
- movl #100,a0
- moveq #1,d1
- movl 4(sp),a1
- trap #9
- bccs 1$
- jmp cerror
-1$:
- clrl d0
- rts
-</programlisting></para>
-
-<para>
-put this in the file <filename>seteuid.s</filename>:
-</para>
-
-<para><programlisting>
- .globl _seteuid
-_seteuid:
- moveq #47,d0
- movl #100,a0
- moveq #0,d1
- movl 4(sp),a1
- trap #9
- bccs 1$
- jmp cerror
-1$:
- clrl d0
- rts
-</programlisting></para>
-
-<para>
-after creating the above files you then assemble them using
-</para>
-
-<para><command>as seteuid.s</command></para>
-<para><command>as setegid.s</command></para>
-
-<para>
-that should produce the files <filename>seteuid.o</filename> and
-<filename>setegid.o</filename>
-</para>
-
-<para>
-then you need to add these to the LIBSM line in the DNIX section of
-the Samba Makefile. Your LIBSM line will then look something like this:
-</para>
-
-<para><programlisting>
-LIBSM = setegid.o seteuid.o -ln
-</programlisting></para>
-
-<para>
-You should then remove the line:
-</para>
-
-<para><programlisting>
-#define NO_EID
-</programlisting></para>
-
-<para>from the DNIX section of <filename>includes.h</filename></para>
-
-</sect1>
-
-<sect1>
-<title>RedHat Linux Rembrandt-II</title>
-
-<para>
-By default RedHat Rembrandt-II during installation adds an
-entry to /etc/hosts as follows:
-<programlisting>
- 127.0.0.1 loopback "hostname"."domainname"
-</programlisting>
-</para>
-
-<para>
-This causes Samba to loop back onto the loopback interface.
-The result is that Samba fails to communicate correctly with
-the world and therefor may fail to correctly negotiate who
-is the master browse list holder and who is the master browser.
-</para>
-
-<para>
-Corrective Action: Delete the entry after the word loopback
- in the line starting 127.0.0.1
-</para>
-</sect1>
-
-<sect1>
-<title>AIX</title>
-<sect2>
-<title>Sequential Read Ahead</title>
-<!-- From an email by William Jojo <jojowil@hvcc.edu> -->
-<para>
-Disabling Sequential Read Ahead using <userinput>vmtune -r 0</userinput> improves
-samba performance significally.
-</para>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Solaris</title>
-
-<sect2>
-<title>Locking improvements</title>
-
-<para>Some people have been experiencing problems with F_SETLKW64/fcntl
-when running samba on solaris. The built in file locking mechanism was
-not scalable. Performance would degrade to the point where processes would
-get into loops of trying to lock a file. It woul try a lock, then fail,
-then try again. The lock attempt was failing before the grant was
-occurring. So the visible manifestation of this would be a handful of
-processes stealing all of the CPU, and when they were trussed they would
-be stuck if F_SETLKW64 loops.
-</para>
-
-<para>
-Sun released patches for Solaris 2.6, 8, and 9. The patch for Solaris 7
-has not been released yet.
-</para>
-
-<para>
-The patch revision for 2.6 is 105181-34
-for 8 is 108528-19
-and for 9 is 112233-04
-</para>
-
-<para>
-After the install of these patches it is recommended to reconfigure
-and rebuild samba.
-</para>
-
-<para>Thanks to Joe Meslovich for reporting</para>
-
-</sect2>
-
-<sect2 id="winbind-solaris9">
-<title>Winbind on Solaris 9</title>
-<para>
-Nsswitch on Solaris 9 refuses to use the winbind nss module. This behavior
-is fixed by Sun in patch 113476-05 which as of March 2003 is not in any
-roll-up packages.
-</para>
-</sect2>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/Problems.sgml b/docs/docbook/projdoc/Problems.sgml
deleted file mode 100644
index eb43b63b63..0000000000
--- a/docs/docbook/projdoc/Problems.sgml
+++ /dev/null
@@ -1,276 +0,0 @@
-<chapter id="problems">
-
-<chapterinfo>
- &author.jerry;
- &author.jelmer;
- <author>
- <firstname>David</firstname><surname>Bannon</surname>
- <affiliation>
- <orgname>Samba Team</orgname>
- <address><email>dbannon@samba.org</email></address>
- </affiliation>
- </author>
- <pubdate>8 Apr 2003</pubdate>
-</chapterinfo>
-
-<title>Analysing and solving samba problems</title>
-
-<para>
-There are many sources of information available in the form
-of mailing lists, RFC's and documentation. The docs that come
-with the samba distribution contain very good explanations of
-general SMB topics such as browsing.</para>
-
-<sect1>
-<title>Diagnostics tools</title>
-
- <para>
-One of the best diagnostic tools for debugging problems is Samba itself.
-You can use the -d option for both smbd and nmbd to specify what
-'debug level' at which to run. See the man pages on smbd, nmbd and
-smb.conf for more information on debugging options. The debug
-level can range from 1 (the default) to 10 (100 for debugging passwords).
-</para>
-
-<para>
-Another helpful method of debugging is to compile samba using the
-<command>gcc -g </command> flag. This will include debug
-information in the binaries and allow you to attach gdb to the
-running smbd / nmbd process. In order to attach gdb to an smbd
-process for an NT workstation, first get the workstation to make the
-connection. Pressing ctrl-alt-delete and going down to the domain box
-is sufficient (at least, on the first time you join the domain) to
-generate a 'LsaEnumTrustedDomains'. Thereafter, the workstation
-maintains an open connection, and therefore there will be an smbd
-process running (assuming that you haven't set a really short smbd
-idle timeout) So, in between pressing ctrl alt delete, and actually
-typing in your password, you can attach gdb and continue.
-</para>
-
-<para>
-Some useful samba commands worth investigating:
-</para>
-
-<itemizedlist>
- <listitem><para>testparam | more</para></listitem>
- <listitem><para>smbclient -L //{netbios name of server}</para></listitem>
-</itemizedlist>
-
-<para>
-An SMB enabled version of tcpdump is available from
-<ulink url="http://www.tcpdump.org/">http://www.tcpdup.org/</ulink>.
-Ethereal, another good packet sniffer for Unix and Win32
-hosts, can be downloaded from <ulink
-url="http://www.ethereal.com/">http://www.ethereal.com</ulink>.
-</para>
-
-<para>
-For tracing things on the Microsoft Windows NT, Network Monitor
-(aka. netmon) is available on the Microsoft Developer Network CD's,
-the Windows NT Server install CD and the SMS CD's. The version of
-netmon that ships with SMS allows for dumping packets between any two
-computers (i.e. placing the network interface in promiscuous mode).
-The version on the NT Server install CD will only allow monitoring
-of network traffic directed to the local NT box and broadcasts on the
-local subnet. Be aware that Ethereal can read and write netmon
-formatted files.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Installing 'Network Monitor' on an NT Workstation or a Windows 9x box</title>
-
-<para>
-Installing netmon on an NT workstation requires a couple
-of steps. The following are for installing Netmon V4.00.349, which comes
-with Microsoft Windows NT Server 4.0, on Microsoft Windows NT
-Workstation 4.0. The process should be similar for other versions of
-Windows NT / Netmon. You will need both the Microsoft Windows
-NT Server 4.0 Install CD and the Workstation 4.0 Install CD.
-</para>
-
-<para>
-Initially you will need to install 'Network Monitor Tools and Agent'
-on the NT Server. To do this
-</para>
-
-<itemizedlist>
- <listitem><para>Goto Start - Settings - Control Panel -
- Network - Services - Add </para></listitem>
-
- <listitem><para>Select the 'Network Monitor Tools and Agent' and
- click on 'OK'.</para></listitem>
-
- <listitem><para>Click 'OK' on the Network Control Panel.
- </para></listitem>
-
- <listitem><para>Insert the Windows NT Server 4.0 install CD
- when prompted.</para></listitem>
-</itemizedlist>
-
-<para>
-At this point the Netmon files should exist in
-<filename>%SYSTEMROOT%\System32\netmon\*.*</filename>.
-Two subdirectories exist as well, <filename>parsers\</filename>
-which contains the necessary DLL's for parsing the netmon packet
-dump, and <filename>captures\</filename>.
-</para>
-
-<para>
-In order to install the Netmon tools on an NT Workstation, you will
-first need to install the 'Network Monitor Agent' from the Workstation
-install CD.
-</para>
-
-<itemizedlist>
- <listitem><para>Goto Start - Settings - Control Panel -
- Network - Services - Add</para></listitem>
-
- <listitem><para>Select the 'Network Monitor Agent' and click
- on 'OK'.</para></listitem>
-
- <listitem><para>Click 'OK' on the Network Control Panel.
- </para></listitem>
-
- <listitem><para>Insert the Windows NT Workstation 4.0 install
- CD when prompted.</para></listitem>
-</itemizedlist>
-
-<para>
-Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon\*.*
-to %SYSTEMROOT%\System32\netmon\*.* on the Workstation and set
-permissions as you deem appropriate for your site. You will need
-administrative rights on the NT box to run netmon.
-</para>
-
-<para>
-To install Netmon on a Windows 9x box install the network monitor agent
-from the Windows 9x CD (\admin\nettools\netmon). There is a readme
-file located with the netmon driver files on the CD if you need
-information on how to do this. Copy the files from a working
-Netmon installation.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Useful URL's</title>
-<itemizedlist>
-
-<listitem><para>Home of Samba site <ulink url="http://samba.org">
- http://samba.org</ulink>. We have a mirror near you !</para></listitem>
-
-<listitem><para> The <emphasis>Development</emphasis> document
-on the Samba mirrors might mention your problem. If so,
-it might mean that the developers are working on it.</para></listitem>
-
-<listitem><para>See how Scott Merrill simulates a BDC behavior at
- <ulink url="http://www.skippy.net/linux/smb-howto.html">
- http://www.skippy.net/linux/smb-howto.html</ulink>. </para></listitem>
-
-<listitem><para>Although 2.0.7 has almost had its day as a PDC, David Bannon will
- keep the 2.0.7 PDC pages at <ulink url="http://bioserve.latrobe.edu.au/samba">
- http://bioserve.latrobe.edu.au/samba</ulink> going for a while yet.</para></listitem>
-
-<listitem><para>Misc links to CIFS information
- <ulink url="http://samba.org/cifs/">http://samba.org/cifs/</ulink></para></listitem>
-
-<listitem><para>NT Domains for Unix <ulink url="http://mailhost.cb1.com/~lkcl/ntdom/">
- http://mailhost.cb1.com/~lkcl/ntdom/</ulink></para></listitem>
-
-<listitem><para>FTP site for older SMB specs:
- <ulink url="ftp://ftp.microsoft.com/developr/drg/CIFS/">
- ftp://ftp.microsoft.com/developr/drg/CIFS/</ulink></para></listitem>
-
-</itemizedlist>
-
-</sect1>
-
-<sect1>
-<title>Getting help from the mailing lists</title>
-
-<para>
-There are a number of Samba related mailing lists. Go to <ulink
-url="http://samba.org">http://samba.org</ulink>, click on your nearest mirror
-and then click on <command>Support</command> and then click on <command>
-Samba related mailing lists</command>.
-</para>
-
-<para>
-For questions relating to Samba TNG go to
-<ulink url="http://www.samba-tng.org/">http://www.samba-tng.org/</ulink>
-It has been requested that you don't post questions about Samba-TNG to the
-main stream Samba lists.</para>
-
-<para>
-If you post a message to one of the lists please observe the following guide lines :
-</para>
-
-<itemizedlist>
-
-<listitem><para> Always remember that the developers are volunteers, they are
-not paid and they never guarantee to produce a particular feature at
-a particular time. Any time lines are 'best guess' and nothing more.
-</para></listitem>
-
-<listitem><para> Always mention what version of samba you are using and what
-operating system its running under. You should probably list the
-relevant sections of your &smb.conf; file, at least the options
-in [global] that affect PDC support.</para></listitem>
-
-<listitem><para>In addition to the version, if you obtained Samba via
-CVS mention the date when you last checked it out.</para></listitem>
-
-<listitem><para> Try and make your question clear and brief, lots of long,
-convoluted questions get deleted before they are completely read !
-Don't post html encoded messages (if you can select colour or font
-size its html).</para></listitem>
-
-<listitem><para> If you run one of those nifty 'I'm on holidays' things when
-you are away, make sure its configured to not answer mailing lists.
-</para></listitem>
-
-<listitem><para> Don't cross post. Work out which is the best list to post to
-and see what happens, i.e. don't post to both samba-ntdom and samba-technical.
-Many people active on the lists subscribe to more
-than one list and get annoyed to see the same message two or more times.
-Often someone will see a message and thinking it would be better dealt
-with on another, will forward it on for you.</para></listitem>
-
-<listitem><para>You might include <emphasis>partial</emphasis>
-log files written at a debug level set to as much as 20.
-Please don't send the entire log but enough to give the context of the
-error messages.</para></listitem>
-
-<listitem><para>(Possibly) If you have a complete netmon trace ( from the opening of
-the pipe to the error ) you can send the *.CAP file as well.</para></listitem>
-
-<listitem><para>Please think carefully before attaching a document to an email.
-Consider pasting the relevant parts into the body of the message. The samba
-mailing lists go to a huge number of people, do they all need a copy of your
-smb.conf in their attach directory?</para></listitem>
-
-</itemizedlist>
-
-</sect1>
-
-<sect1>
-<title>How to get off the mailinglists</title>
-
-<para>To have your name removed from a samba mailing list, go to the
-same place you went to to get on it. Go to <ulink
-url="http://lists.samba.org/">http://lists.samba.org</ulink>,
-click on your nearest mirror and then click on <command>Support</command> and
-then click on <command> Samba related mailing lists</command>. Or perhaps see
-<ulink url="http://lists.samba.org/mailman/roster/samba-ntdom">here</ulink>
-</para>
-
-<para>
-Please don't post messages to the list asking to be removed, you will just
-be referred to the above address (unless that process failed in some way...)
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/ProfileMgmt.sgml b/docs/docbook/projdoc/ProfileMgmt.sgml
deleted file mode 100644
index 82897808b2..0000000000
--- a/docs/docbook/projdoc/ProfileMgmt.sgml
+++ /dev/null
@@ -1,1126 +0,0 @@
-<chapter id="ProfileMgmt">
-<chapterinfo>
- &author.jht;
- <pubdate>April 3 2003</pubdate>
-</chapterinfo>
-
-<title>Desktop Profile Management</title>
-
-<sect1>
-<title>Roaming Profiles</title>
-
-<warning>
-<para>
-Roaming profiles support is different for Win9x / Me and Windows NT4/200x.
-</para>
-</warning>
-
-<para>
-Before discussing how to configure roaming profiles, it is useful to see how
-Windows 9x / Me and Windows NT4/200x clients implement these features.
-</para>
-
-<para>
-Windows 9x / Me clients send a NetUserGetInfo request to the server to get the user's
-profiles location. However, the response does not have room for a separate
-profiles location field, only the user's home share. This means that Win9X/Me
-profiles are restricted to being stored in the user's home directory.
-</para>
-
-
-<para>
-Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields,
-including a separate field for the location of the user's profiles.
-</para>
-
-<sect2>
-<title>Samba Configuration for Profile Handling</title>
-
-<para>
-This section documents how to configure Samba for MS Windows client profile support.
-</para>
-
-<sect3>
-<title>NT4/200x User Profiles</title>
-
-<para>
-To support Windowns NT4/200x clients, in the [global] section of smb.conf set the
-following (for example):
-</para>
-
-<para>
-<programlisting>
- logon path = \\profileserver\profileshare\profilepath\%U\moreprofilepath
-</programlisting>
-
- This is typically implemented like:
-
-<programlisting>
- logon path = \\%L\Profiles\%u
-</programlisting>
-where %L translates to the name of the Samba server and %u translates to the user name
-</para>
-
-<para>
-The default for this option is \\%N\%U\profile, namely \\sambaserver\username\profile.
-The \\N%\%U service is created automatically by the [homes] service. If you are using
-a samba server for the profiles, you _must_ make the share specified in the logon path
-browseable. Please refer to the man page for smb.conf in respect of the different
-symantics of %L and %N, as well as %U and %u.
-</para>
-
-<note>
-<para>
-MS Windows NT/2K clients at times do not disconnect a connection to a server
-between logons. It is recommended to NOT use the <command>homes</command>
-meta-service name as part of the profile share path.
-</para>
-</note>
-</sect3>
-
-<sect3>
-<title>Windows 9x / Me User Profiles</title>
-
-<para>
-To support Windows 9x / Me clients, you must use the "logon home" parameter. Samba has
-now been fixed so that <userinput>net use /home</userinput> now works as well, and it, too, relies
-on the <command>logon home</command> parameter.
-</para>
-
-<para>
-By using the logon home parameter, you are restricted to putting Win9x / Me
-profiles in the user's home directory. But wait! There is a trick you
-can use. If you set the following in the <command>[global]</command> section of your &smb.conf; file:
-</para>
-<para><programlisting>
- logon home = \\%L\%U\.profiles
-</programlisting></para>
-
-<para>
-then your Windows 9x / Me clients will dutifully put their clients in a subdirectory
-of your home directory called <filename>.profiles</filename> (thus making them hidden).
-</para>
-
-<para>
-Not only that, but <userinput>net use /home</userinput> will also work, because of a feature in
-Windows 9x / Me. It removes any directory stuff off the end of the home directory area
-and only uses the server and share portion. That is, it looks like you
-specified \\%L\%U for <command>logon home</command>.
-</para>
-</sect3>
-
-<sect3>
-<title>Mixed Windows 9x / Me and Windows NT4/200x User Profiles</title>
-
-<para>
-You can support profiles for both Win9X and WinNT clients by setting both the
-<command>logon home</command> and <command>logon path</command> parameters. For example:
-</para>
-
-<para><programlisting>
- logon home = \\%L\%u\.profiles
- logon path = \\%L\profiles\%u
-</programlisting></para>
-
-</sect3>
-<sect3>
-<title>Disabling Roaming Profile Support</title>
-
-<para>
-A question often asked is "How may I enforce use of local profiles?" or
-"How do I disable Roaming Profiles?"
-</para>
-
-<para>
-There are three ways of doing this:
-</para>
-
-<itemizedlist>
- <listitem><para>
- <command>In smb.conf:</command> affect the following settings and ALL clients
- will be forced to use a local profile:
- <programlisting>
- logon home =
- logon path =
- </programlisting></para></listitem>
-
- <listitem><para>
- <command>MS Windows Registry:</command> by using the Microsoft Management Console
- gpedit.msc to instruct your MS Windows XP machine to use only a local profile. This
- of course modifies registry settings. The full path to the option is:
- <programlisting>
- Local Computer Policy\
- Computer Configuration\
- Administrative Templates\
- System\
- User Profiles\
-
- Disable: Only Allow Local User Profiles
- Disable: Prevent Roaming Profile Change from Propogating to the Server
- </programlisting>
- </para>
- </listitem>
-
- <listitem><para>
- <command>Change of Profile Type:</command> From the start menu right click on the
- MY Computer icon, select <emphasis>Properties</emphasis>, click on the "<emphasis>User Profiles</emphasis>
- tab, select the profile you wish to change from Roaming type to Local, click <emphasis>Change Type</emphasis>.
- </para></listitem>
-</itemizedlist>
-
-<para>
-Consult the MS Windows registry guide for your particular MS Windows version for more
-information about which registry keys to change to enforce use of only local user
-profiles.
-</para>
-
-<note><para>
-The specifics of how to convert a local profile to a roaming profile, or a roaming profile
-to a local one vary according to the version of MS Windows you are running. Consult the
-Microsoft MS Windows Resource Kit for your version of Windows for specific information.
-</para></note>
-
-</sect3>
-</sect2>
-
-<sect2>
-<title>Windows Client Profile Configuration Information</title>
-
-<sect3>
-<title>Windows 9x / Me Profile Setup</title>
-
-<para>
-When a user first logs in on Windows 9X, the file user.DAT is created,
-as are folders "Start Menu", "Desktop", "Programs" and "Nethood".
-These directories and their contents will be merged with the local
-versions stored in c:\windows\profiles\username on subsequent logins,
-taking the most recent from each. You will need to use the [global]
-options "preserve case = yes", "short preserve case = yes" and
-"case sensitive = no" in order to maintain capital letters in shortcuts
-in any of the profile folders.
-</para>
-
-<para>
-The user.DAT file contains all the user's preferences. If you wish to
-enforce a set of preferences, rename their user.DAT file to user.MAN,
-and deny them write access to this file.
-</para>
-
-<orderedlist>
- <listitem>
- <para>
- On the Windows 9x / Me machine, go to Control Panel -> Passwords and
- select the User Profiles tab. Select the required level of
- roaming preferences. Press OK, but do _not_ allow the computer
- to reboot.
- </para>
- </listitem>
-
- <listitem>
- <para>
- On the Windows 9x / Me machine, go to Control Panel -> Network ->
- Client for Microsoft Networks -> Preferences. Select 'Log on to
- NT Domain'. Then, ensure that the Primary Logon is 'Client for
- Microsoft Networks'. Press OK, and this time allow the computer
- to reboot.
- </para>
- </listitem>
-</orderedlist>
-
-<para>
-Under Windows 9x / Me Profiles are downloaded from the Primary Logon.
-If you have the Primary Logon as 'Client for Novell Networks', then
-the profiles and logon script will be downloaded from your Novell
-Server. If you have the Primary Logon as 'Windows Logon', then the
-profiles will be loaded from the local machine - a bit against the
-concept of roaming profiles, it would seem!
-</para>
-
-<para>
-You will now find that the Microsoft Networks Login box contains
-[user, password, domain] instead of just [user, password]. Type in
-the samba server's domain name (or any other domain known to exist,
-but bear in mind that the user will be authenticated against this
-domain and profiles downloaded from it, if that domain logon server
-supports it), user name and user's password.
-</para>
-
-<para>
-Once the user has been successfully validated, the Windows 9x / Me machine
-will inform you that 'The user has not logged on before' and asks you
-if you wish to save the user's preferences? Select 'yes'.
-</para>
-
-<para>
-Once the Windows 9x / Me client comes up with the desktop, you should be able
-to examine the contents of the directory specified in the "logon path"
-on the samba server and verify that the "Desktop", "Start Menu",
-"Programs" and "Nethood" folders have been created.
-</para>
-
-<para>
-These folders will be cached locally on the client, and updated when
-the user logs off (if you haven't made them read-only by then).
-You will find that if the user creates further folders or short-cuts,
-that the client will merge the profile contents downloaded with the
-contents of the profile directory already on the local client, taking
-the newest folders and short-cuts from each set.
-</para>
-
-<para>
-If you have made the folders / files read-only on the samba server,
-then you will get errors from the Windows 9x / Me machine on logon and logout, as
-it attempts to merge the local and the remote profile. Basically, if
-you have any errors reported by the Windows 9x / Me machine, check the Unix file
-permissions and ownership rights on the profile directory contents,
-on the samba server.
-</para>
-
-<para>
-If you have problems creating user profiles, you can reset the user's
-local desktop cache, as shown below. When this user then next logs in,
-they will be told that they are logging in "for the first time".
-</para>
-
-<orderedlist>
- <listitem>
- <para>
- instead of logging in under the [user, password, domain] dialog,
- press escape.
- </para>
- </listitem>
-
- <listitem>
- <para>
- run the regedit.exe program, and look in:
- </para>
-
- <para>
- HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList
- </para>
-
- <para>
- you will find an entry, for each user, of ProfilePath. Note the
- contents of this key (likely to be c:\windows\profiles\username),
- then delete the key ProfilePath for the required user.
-
- [Exit the registry editor].
-
- </para>
- </listitem>
-
- <listitem>
- <para>
- <emphasis>WARNING</emphasis> - before deleting the contents of the
- directory listed in the ProfilePath (this is likely to be
- <filename>c:\windows\profiles\username)</filename>, ask them if they
- have any important files stored on their desktop or in their start menu.
- Delete the contents of the directory ProfilePath (making a backup if any
- of the files are needed).
- </para>
-
- <para>
- This will have the effect of removing the local (read-only hidden
- system file) user.DAT in their profile directory, as well as the
- local "desktop", "nethood", "start menu" and "programs" folders.
- </para>
- </listitem>
-
- <listitem>
- <para>
- search for the user's .PWL password-caching file in the c:\windows
- directory, and delete it.
- </para>
- </listitem>
-
- <listitem>
- <para>
- log off the windows 9x / Me client.
- </para>
- </listitem>
-
- <listitem>
- <para>
- check the contents of the profile path (see "logon path" described
- above), and delete the user.DAT or user.MAN file for the user,
- making a backup if required.
- </para>
- </listitem>
-
-</orderedlist>
-
-<para>
-If all else fails, increase samba's debug log levels to between 3 and 10,
-and / or run a packet trace program such as ethereal or netmon.exe, and
-look for error messages.
-</para>
-
-<para>
-If you have access to an Windows NT4/200x server, then first set up roaming profiles
-and / or netlogons on the Windows NT4/200x server. Make a packet trace, or examine
-the example packet traces provided with Windows NT4/200x server, and see what the
-differences are with the equivalent samba trace.
-</para>
-
-</sect3>
-
-<sect3>
-<title>Windows NT4 Workstation</title>
-
-<para>
-When a user first logs in to a Windows NT Workstation, the profile
-NTuser.DAT is created. The profile location can be now specified
-through the "logon path" parameter.
-</para>
-
-<para>
-There is a parameter that is now available for use with NT Profiles:
-"logon drive". This should be set to <filename>H:</filename> or any other drive, and
-should be used in conjunction with the new "logon home" parameter.
-</para>
-
-<para>
-The entry for the NT4 profile is a _directory_ not a file. The NT
-help on profiles mentions that a directory is also created with a .PDS
-extension. The user, while logging in, must have write permission to
-create the full profile path (and the folder with the .PDS extension
-for those situations where it might be created.)
-</para>
-
-<para>
-In the profile directory, Windows NT4 creates more folders than Windows 9x / Me.
-It creates "Application Data" and others, as well as "Desktop", "Nethood",
-"Start Menu" and "Programs". The profile itself is stored in a file
-NTuser.DAT. Nothing appears to be stored in the .PDS directory, and
-its purpose is currently unknown.
-</para>
-
-<para>
-You can use the System Control Panel to copy a local profile onto
-a samba server (see NT Help on profiles: it is also capable of firing
-up the correct location in the System Control Panel for you). The
-NT Help file also mentions that renaming NTuser.DAT to NTuser.MAN
-turns a profile into a mandatory one.
-</para>
-
-<para>
-The case of the profile is significant. The file must be called
-NTuser.DAT or, for a mandatory profile, NTuser.MAN.
-</para>
-</sect3>
-
-<sect3>
-<title>Windows 2000/XP Professional</title>
-
-<para>
-You must first convert the profile from a local profile to a domain
-profile on the MS Windows workstation as follows:
-</para>
-
-<itemizedlist>
- <listitem><para>
- Log on as the LOCAL workstation administrator.
- </para></listitem>
-
- <listitem><para>
- Right click on the 'My Computer' Icon, select 'Properties'
- </para></listitem>
-
- <listitem><para>
- Click on the 'User Profiles' tab
- </para></listitem>
-
- <listitem><para>
- Select the profile you wish to convert (click on it once)
- </para></listitem>
-
- <listitem><para>
- Click on the button 'Copy To'
- </para></listitem>
-
- <listitem><para>
- In the "Permitted to use" box, click on the 'Change' button.
- </para></listitem>
-
- <listitem><para>
- Click on the 'Look in" area that lists the machine name, when you click
- here it will open up a selection box. Click on the domain to which the
- profile must be accessible.
- </para>
-
- <note><para>You will need to log on if a logon box opens up. Eg: In the connect
- as: MIDEARTH\root, password: mypassword.</para></note>
- </listitem>
-
- <listitem><para>
- To make the profile capable of being used by anyone select 'Everyone'
- </para></listitem>
-
- <listitem><para>
- Click OK. The Selection box will close.
- </para></listitem>
-
- <listitem><para>
- Now click on the 'Ok' button to create the profile in the path you
- nominated.
- </para></listitem>
-</itemizedlist>
-
-<para>
-Done. You now have a profile that can be editted using the samba-3.0.0
-<filename>profiles</filename> tool.
-</para>
-
-<note>
-<para>
-Under NT/2K the use of mandotory profiles forces the use of MS Exchange
-storage of mail data. That keeps desktop profiles usable.
-</para>
-</note>
-
-<note>
-<itemizedlist>
-<listitem><para>
-This is a security check new to Windows XP (or maybe only
-Windows XP service pack 1). It can be disabled via a group policy in
-Active Directory. The policy is:</para>
-
-<para>"Computer Configuration\Administrative Templates\System\User
-Profiles\Do not check for user ownership of Roaming Profile Folders"</para>
-
-<para>...and it should be set to "Enabled".
-Does the new version of samba have an Active Directory analogue? If so,
-then you may be able to set the policy through this.
-</para>
-
-<para>
-If you cannot set group policies in samba, then you may be able to set
-the policy locally on each machine. If you want to try this, then do
-the following (N.B. I don't know for sure that this will work in the
-same way as a domain group policy):
-</para>
-
-</listitem>
-
-<listitem><para>
-On the XP workstation log in with an Administrator account.
-</para></listitem>
-
- <listitem><para>Click: "Start", "Run"</para></listitem>
- <listitem><para>Type: "mmc"</para></listitem>
- <listitem><para>Click: "OK"</para></listitem>
-
- <listitem><para>A Microsoft Management Console should appear.</para></listitem>
- <listitem><para>Click: File, "Add/Remove Snap-in...", "Add"</para></listitem>
- <listitem><para>Double-Click: "Group Policy"</para></listitem>
- <listitem><para>Click: "Finish", "Close"</para></listitem>
- <listitem><para>Click: "OK"</para></listitem>
-
- <listitem><para>In the "Console Root" window:</para></listitem>
- <listitem><para>Expand: "Local Computer Policy", "Computer Configuration",</para></listitem>
- <listitem><para>"Administrative Templates", "System", "User Profiles"</para></listitem>
- <listitem><para>Double-Click: "Do not check for user ownership of Roaming Profile</para></listitem>
- <listitem><para>Folders"</para></listitem>
- <listitem><para>Select: "Enabled"</para></listitem>
- <listitem><para>Click: OK"</para></listitem>
-
- <listitem><para>Close the whole console. You do not need to save the settings (this
- refers to the console settings rather than the policies you have
- changed).</para></listitem>
-
- <listitem><para>Reboot</para></listitem>
-</itemizedlist>
-</note>
-</sect3>
-</sect2>
-
-<sect2>
-<title>Sharing Profiles between W9x/Me and NT4/200x/XP workstations</title>
-
-<para>
-Sharing of desktop profiles between Windows versions is NOT recommended.
-Desktop profiles are an evolving phenomenon and profiles for later versions
-of MS Windows clients add features that may interfere with earlier versions
-of MS Windows clients. Probably the more salient reason to NOT mix profiles
-is that when logging off an earlier version of MS Windows the older format
-of profile contents may overwrite information that belongs to the newer
-version resulting in loss of profile information content when that user logs
-on again with the newer version of MS Windows.
-</para>
-
-<para>
-If you then want to share the same Start Menu / Desktop with W9x/Me, you will
-need to specify a common location for the profiles. The smb.conf parameters
-that need to be common are <emphasis>logon path</emphasis> and
-<emphasis>logon home</emphasis>.
-</para>
-
-<para>
-If you have this set up correctly, you will find separate user.DAT and
-NTuser.DAT files in the same profile directory.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Profile Migration from Windows NT4/200x Server to Samba</title>
-
-<para>
-There is nothing to stop you specifying any path that you like for the
-location of users' profiles. Therefore, you could specify that the
-profile be stored on a samba server, or any other SMB server, as long as
-that SMB server supports encrypted passwords.
-</para>
-
-<sect3>
-<title>Windows NT4 Profile Management Tools</title>
-
-<para>
-Unfortunately, the Resource Kit information is specific to the version of MS Windows
-NT4/200x. The correct resource kit is required for each platform.
-</para>
-
-<para>
-Here is a quick guide:
-</para>
-
-<itemizedlist>
-
-<listitem><para>
-On your NT4 Domain Controller, right click on 'My Computer', then
-select the tab labelled 'User Profiles'.
-</para></listitem>
-
-<listitem><para>
-Select a user profile you want to migrate and click on it.
-</para>
-
-<note><para>I am using the term &quot;migrate&quot; lossely. You can copy a profile to
-create a group profile. You can give the user 'Everyone' rights to the
-profile you copy this to. That is what you need to do, since your samba
-domain is not a member of a trust relationship with your NT4 PDC.</para></note>
-</listitem>
-
- <listitem><para>Click the 'Copy To' button.</para></listitem>
-
- <listitem><para>In the box labelled 'Copy Profile to' add your new path, eg:
- <filename>c:\temp\foobar</filename></para></listitem>
-
- <listitem><para>Click on the button labelled 'Change' in the "Permitted to use" box.</para></listitem>
-
- <listitem><para>Click on the group 'Everyone' and then click OK. This closes the
- 'chose user' box.</para></listitem>
-
- <listitem><para>Now click OK.</para></listitem>
-</itemizedlist>
-
-<para>
-Follow the above for every profile you need to migrate.
-</para>
-
-</sect3>
-
-<sect3>
-<title>Side bar Notes</title>
-
-<para>
-You should obtain the SID of your NT4 domain. You can use smbpasswd to do
-this. Read the man page.</para>
-
-<para>
-With Samba-3.0.0 alpha code you can import all you NT4 domain accounts
-using the net samsync method. This way you can retain your profile
-settings as well as all your users.
-</para>
-
-</sect3>
-
-<sect3>
-<title>moveuser.exe</title>
-
-<para>
-The W2K professional resource kit has moveuser.exe. moveuser.exe changes
-the security of a profile from one user to another. This allows the account
-domain to change, and/or the user name to change.
-</para>
-
-</sect3>
-
-<sect3>
-<title>Get SID</title>
-
-<para>
-You can identify the SID by using GetSID.exe from the Windows NT Server 4.0
-Resource Kit.
-</para>
-
-<para>
-Windows NT 4.0 stores the local profile information in the registry under
-the following key:
-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
-</para>
-
-<para>
-Under the ProfileList key, there will be subkeys named with the SIDs of the
-users who have logged on to this computer. (To find the profile information
-for the user whose locally cached profile you want to move, find the SID for
-the user with the GetSID.exe utility.) Inside of the appropriate user's
-subkey, you will see a string value named ProfileImagePath.
-</para>
-
-</sect3>
-</sect2>
-</sect1>
-
-<sect1>
-<title>Mandatory profiles</title>
-
-<para>
-A Mandatory Profile is a profile that the user does NOT have the ability to overwrite.
-During the user's session it may be possible to change the desktop environment, but
-as the user logs out all changes made will be lost. If it is desired to NOT allow the
-user any ability to change the desktop environment then this must be done through
-policy settings. See previous chapter.
-</para>
-
-<note>
-<para>
-Under NO circumstances should the profile directory (or it's contents) be made read-only
-as this may render the profile un-usable.
-</para>
-</note>
-
-<para>
-For MS Windows NT4/200x/XP the above method can be used to create mandatory profiles
-also. To convert a group profile into a mandatory profile simply locate the NTUser.DAT
-file in the copied profile and rename it to NTUser.MAN.
-</para>
-
-<para>
-For MS Windows 9x / Me it is the User.DAT file that must be renamed to User.MAN to
-affect a mandatory profile.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Creating/Managing Group Profiles</title>
-
-<para>
-Most organisations are arranged into departments. There is a nice benenfit in
-this fact since usually most users in a department will require the same desktop
-applications and the same desktop layout. MS Windows NT4/200x/XP will allow the
-use of Group Profiles. A Group Profile is a profile that is created firstly using
-a template (example) user. Then using the profile migration tool (see above) the
-profile is assigned access rights for the user group that needs to be given access
-to the group profile.
-</para>
-
-<para>
-The next step is rather important. PLEASE NOTE: Instead of assigning a group profile
-to users (ie: Using User Manager) on a "per user" basis, the group itself is assigned
-the now modified profile.
-</para>
-
-<note>
- <para>
- Be careful with group profiles, if the user who is a member of a group also
- has a personal profile, then the result will be a fusion (merge) of the two.
- </para>
-</note>
-
-</sect1>
-
-<sect1>
-<title>Default Profile for Windows Users</title>
-
-<para>
-MS Windows 9x / Me and NT4/200x/XP will use a default profile for any user for whom
-a profile does not already exist. Armed with a knowledge of where the default profile
-is located on the Windows workstation, and knowing which registry keys affect the path
-from which the default profile is created, it is possible to modify the default profile
-to one that has been optimised for the site. This has significant administrative
-advantages.
-</para>
-
-<sect2>
-<title>MS Windows 9x/Me</title>
-
-<para>
-To enable default per use profiles in Windows 9x / Me you can either use the Windows 98 System
-Policy Editor or change the registry directly.
-</para>
-
-<para>
-To enable default per user profiles in Windows 9x / Me, launch the System Policy Editor, then
-select File -> Open Registry, then click on the Local Computer icon, click on Windows 98 System,
-select User Profiles, click on the enable box. Do not forget to save the registry changes.
-</para>
-
-<para>
-To modify the registry directly, launch the Registry Editor (regedit.exe), select the hive
-<filename>HKEY_LOCAL_MACHINE\Network\Logon</filename>. Now add a DWORD type key with the name
-"User Profiles", to enable user profiles set the value to 1, to disable user profiles set it to 0.
-</para>
-
-<sect3>
-<title>How User Profiles Are Handled in Windows 9x / Me?</title>
-
-<para>
-When a user logs on to a Windows 9x / Me machine, the local profile path,
-<filename>HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ProfileList</filename>, is checked
-for an existing entry for that user:
-</para>
-
-<para>
-If the user has an entry in this registry location, Windows 9x / Me checks for a locally cached
-version of the user profile. Windows 9x / Me also checks the user's home directory (or other
-specified directory if the location has been modified) on the server for the User Profile.
-If a profile exists in both locations, the newer of the two is used. If the User Profile exists
-on the server, but does not exist on the local machine, the profile on the server is downloaded
-and used. If the User Profile only exists on the local machine, that copy is used.
-</para>
-
-<para>
-If a User Profile is not found in either location, the Default User Profile from the Windows 9x / Me
-machine is used and is copied to a newly created folder for the logged on user. At log off, any
-changes that the user made are written to the user's local profile. If the user has a roaming
-profile, the changes are written to the user's profile on the server.
-</para>
-
-</sect3>
-</sect2>
-
-<sect2>
-<title>MS Windows NT4 Workstation</title>
-
-<para>
-On MS Windows NT4 the default user profile is obtained from the location
-<filename>%SystemRoot%\Profiles</filename> which in a default installation will translate to
-<filename>C:\WinNT\Profiles</filename>. Under this directory on a clean install there will be
-three (3) directories: <filename>Administrator, All Users, Default User</filename>.
-</para>
-
-<para>
-The <filename>All Users</filename> directory contains menu settings that are common across all
-system users. The <filename>Default User</filename> directory contains menu entries that are
-customisable per user depending on the profile settings chosen/created.
-</para>
-
-<para>
-When a new user first logs onto an MS Windows NT4 machine a new profile is created from:
-</para>
-
-<simplelist>
- <member>All Users settings</member>
- <member>Default User settings (contains the default NTUser.DAT file)</member>
-</simplelist>
-
-<para>
-When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain
-the following steps are followed in respect of profile handling:
-</para>
-
-<orderedlist>
- <listitem>
- <para>
- The users' account information which is obtained during the logon process contains
- the location of the users' desktop profile. The profile path may be local to the
- machine or it may be located on a network share. If there exists a profile at the location
- of the path from the user account, then this profile is copied to the location
- <filename>%SystemRoot%\Profiles\%USERNAME%</filename>. This profile then inherits the
- settings in the <filename>All Users</filename> profile in the <filename>%SystemRoot%\Profiles</filename>
- location.
- </para>
- </listitem>
-
- <listitem>
- <para>
- If the user account has a profile path, but at it's location a profile does not exist,
- then a new profile is created in the <filename>%SystemRoot%\Profiles\%USERNAME%</filename>
- directory from reading the <filename>Default User</filename> profile.
- </para>
- </listitem>
-
- <listitem>
- <para>
- If the NETLOGON share on the authenticating server (logon server) contains a policy file
- (<filename>NTConfig.POL</filename>) then it's contents are applied to the <filename>NTUser.DAT</filename>
- which is applied to the <filename>HKEY_CURRENT_USER</filename> part of the registry.
- </para>
- </listitem>
-
- <listitem>
- <para>
- When the user logs out, if the profile is set to be a roaming profile it will be written
- out to the location of the profile. The <filename>NTuser.DAT</filename> file is then
- re-created from the contents of the <filename>HKEY_CURRENT_USER</filename> contents.
- Thus, should there not exist in the NETLOGON share an <filename>NTConfig.POL</filename> at the
- next logon, the effect of the provious <filename>NTConfig.POL</filename> will still be held
- in the profile. The effect of this is known as <emphasis>tatooing</emphasis>.
- </para>
- </listitem>
-</orderedlist>
-
-<para>
-MS Windows NT4 profiles may be <emphasis>Local</emphasis> or <emphasis>Roaming</emphasis>. A Local profile
-will stored in the <filename>%SystemRoot%\Profiles\%USERNAME%</filename> location. A roaming profile will
-also remain stored in the same way, unless the following registry key is created:
-</para>
-
-<para>
-<programlisting>
- HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\winlogon\
- "DeleteRoamingCache"=dword:00000001
-</programlisting>
-
-In which case, the local copy (in <filename>%SystemRoot%\Profiles\%USERNAME%</filename>) will be
-deleted on logout.
-</para>
-
-<para>
-Under MS Windows NT4 default locations for common resources (like <filename>My Documents</filename>
-may be redirected to a network share by modifying the following registry keys. These changes may be affected
-via use of the System Policy Editor (to do so may require that you create your owns template extension
-for the policy editor to allow this to be done through the GUI. Another way to do this is by way of first
-creating a default user profile, then while logged in as that user, run regedt32 to edit the key settings.
-</para>
-
-<para>
-The Registry Hive key that affects the behaviour of folders that are part of the default user profile
-are controlled by entries on Windows NT4 is:
-</para>
-
-<para>
-<programlisting>
- HKEY_CURRENT_USER
- \Software
- \Microsoft
- \Windows
- \CurrentVersion
- \Explorer
- \User Shell Folders\
-</programlisting>
-</para>
-
-<para>
-The above hive key contains a list of automatically managed folders. The default entries are:
-</para>
-
- <para>
- <programlisting>
- Name Default Value
- -------------- -----------------------------------------
- AppData %USERPROFILE%\Application Data
- Desktop %USERPROFILE%\Desktop
- Favorites %USERPROFILE%\Favorites
- NetHood %USERPROFILE%\NetHood
- PrintHood %USERPROFILE%\PrintHood
- Programs %USERPROFILE%\Start Menu\Programs
- Recent %USERPROFILE%\Recent
- SendTo %USERPROFILE%\SendTo
- Start Menu %USERPROFILE%\Start Menu
- Startup %USERPROFILE%\Start Menu\Programs\Startup
- </programlisting>
- </para>
-
-<para>
-The registry key that contains the location of the default profile settings is:
-
-<programlisting>
- HKEY_LOCAL_MACHINE
- \SOFTWARE
- \Microsoft
- \Windows
- \CurrentVersion
- \Explorer
- \User Shell Folders
-</programlisting>
-
-The default entries are:
-
-<programlisting>
- Common Desktop %SystemRoot%\Profiles\All Users\Desktop
- Common Programs %SystemRoot%\Profiles\All Users\Programs
- Common Start Menu %SystemRoot%\Profiles\All Users\Start Menu
- Common Startup %SystemRoot%\Profiles\All Users\Start Menu\Progams\Startup
-</programlisting>
-</para>
-
-</sect2>
-
-<sect2>
-<title>MS Windows 200x/XP</title>
-
- <note>
- <para>
- MS Windows XP Home Edition does use default per user profiles, but can not participate
- in domain security, can not log onto an NT/ADS style domain, and thus can obtain the profile
- only from itself. While there are benefits in doing this the beauty of those MS Windows
- clients that CAN participate in domain logon processes allows the administrator to create
- a global default profile and to enforce it through the use of Group Policy Objects (GPOs).
- </para>
- </note>
-
-<para>
-When a new user first logs onto MS Windows 200x/XP machine the default profile is obtained from
-<filename>C:\Documents and Settings\Default User</filename>. The administrator can modify (or change
-the contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum
-arrangement since it will involve copying a new default profile to every MS Windows 200x/XP client
-workstation.
-</para>
-
-<para>
-When MS Windows 200x/XP participate in a domain security context, and if the default user
-profile is not found, then the client will search for a default profile in the NETLOGON share
-of the authenticating server. ie: In MS Windows parlance:
-<filename>%LOGONSERVER%\NETLOGON\Default User</filename> and if one exits there it will copy this
-to the workstation to the <filename>C:\Documents and Settings\</filename> under the Windows
-login name of the user.
-</para>
-
- <note>
- <para>
- This path translates, in Samba parlance, to the smb.conf [NETLOGON] share. The directory
- should be created at the root of this share and must be called <filename>Default Profile</filename>.
- </para>
- </note>
-
-<para>
-If a default profile does not exist in this location then MS Windows 200x/XP will use the local
-default profile.
-</para>
-
-<para>
-On loging out, the users' desktop profile will be stored to the location specified in the registry
-settings that pertain to the user. If no specific policies have been created, or passed to the client
-during the login process (as Samba does automatically), then the user's profile will be written to
-the local machine only under the path <filename>C:\Documents and Settings\%USERNAME%</filename>.
-</para>
-
-<para>
-Those wishing to modify the default behaviour can do so through three methods:
-</para>
-
-<itemizedlist>
- <listitem>
- <para>
- Modify the registry keys on the local machine manually and place the new default profile in the
- NETLOGON share root - NOT recommended as it is maintenance intensive.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Create an NT4 style NTConfig.POL file that specified this behaviour and locate this file
- in the root of the NETLOGON share along with the new default profile.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Create a GPO that enforces this through Active Directory, and place the new default profile
- in the NETLOGON share.
- </para>
- </listitem>
-</itemizedlist>
-
-<para>
-The Registry Hive key that affects the behaviour of folders that are part of the default user profile
-are controlled by entries on Windows 200x/XP is:
-</para>
-
-<para>
-<programlisting>
- HKEY_CURRENT_USER
- \Software
- \Microsoft
- \Windows
- \CurrentVersion
- \Explorer
- \User Shell Folders\
-</programlisting>
-</para>
-
-<para>
-The above hive key contains a list of automatically managed folders. The default entries are:
-</para>
-
- <para>
- <programlisting>
- Name Default Value
- -------------- -----------------------------------------
- AppData %USERPROFILE%\Application Data
- Cache %USERPROFILE%\Local Settings\Temporary Internet Files
- Cookies %USERPROFILE%\Cookies
- Desktop %USERPROFILE%\Desktop
- Favorites %USERPROFILE%\Favorites
- History %USERPROFILE%\Local Settings\History
- Local AppData %USERPROFILE%\Local Settings\Application Data
- Local Settings %USERPROFILE%\Local Settings
- My Pictures %USERPROFILE%\My Documents\My Pictures
- NetHood %USERPROFILE%\NetHood
- Personal %USERPROFILE%\My Documents
- PrintHood %USERPROFILE%\PrintHood
- Programs %USERPROFILE%\Start Menu\Programs
- Recent %USERPROFILE%\Recent
- SendTo %USERPROFILE%\SendTo
- Start Menu %USERPROFILE%\Start Menu
- Startup %USERPROFILE%\Start Menu\Programs\Startup
- Templates %USERPROFILE%\Templates
- </programlisting>
- </para>
-
-<para>
-There is also an entry called "Default" that has no value set. The default entry is of type REG_SZ, all
-the others are of type REG_EXPAND_SZ.
-</para>
-
-<para>
-It makes a huge difference to the speed of handling roaming user profiles if all the folders are
-stored on a dedicated location on a network server. This means that it will NOT be necessary to
-write the Outlook PST file over the network for every login and logout.
-</para>
-
-<para>
-To set this to a network location you could use the following examples:
-
-<programlisting>
- %LOGONSERVER%\%USERNAME%\Default Folders
-</programlisting>
-
-This would store the folders in the user's home directory under a directory called "Default Folders"
-
-You could also use:
-
-<programlisting>
- \\SambaServer\FolderShare\%USERNAME%
-</programlisting>
-
-in which case the default folders will be stored in the server named <emphasis>SambaServer</emphasis>
-in the share called <emphasis>FolderShare</emphasis> under a directory that has the name of the MS Windows
-user as seen by the Linux/Unix file system.
-</para>
-
-<para>
-Please note that once you have created a default profile share, you MUST migrate a user's profile
-(default or custom) to it.
-</para>
-
-<para>
-MS Windows 200x/XP profiles may be <emphasis>Local</emphasis> or <emphasis>Roaming</emphasis>.
-A roaming profile will be cached locally unless the following registry key is created:
-</para>
-
-<para>
-<programlisting>
- HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\winlogon\
- "DeleteRoamingCache"=dword:00000001
-</programlisting>
-
-In which case, the local cache copy will be deleted on logout.
-</para>
-</sect2>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/SWAT.sgml b/docs/docbook/projdoc/SWAT.sgml
deleted file mode 100644
index f238e8e1b0..0000000000
--- a/docs/docbook/projdoc/SWAT.sgml
+++ /dev/null
@@ -1,351 +0,0 @@
-<chapter id="SWAT">
-<chapterinfo>
- &author.jht;
- <pubdate>April 21, 2003</pubdate>
-</chapterinfo>
-
-<title>SWAT - The Samba Web Admininistration Tool</title>
-
-<para>
-There are many and varied opinions regarding the usefulness or otherwise of SWAT.
-No matter how hard one tries to produce the perfect configuration tool it remains
-an object of personal taste. SWAT is a tool that will allow web based configuration
-of samba. It has a wizard that may help to get samba configured quickly, it has context
-sensitive help on each smb.conf parameter, it provides for monitoring of current state
-of connection information, and it allows network wide MS Windows network password
-management.
-</para>
-
-<sect1>
-<title>SWAT Features and Benefits</title>
-
-<para>
-There are network administrators who believe that it is a good idea to write systems
-documentation inside configuration files, for them SWAT will aways be a nasty tool. SWAT
-does not store the configuration file in any intermediate form, rather, it stores only the
-parameter settings, so when SWAT writes the smb.conf file to disk it will write only
-those parameters that are at other than the default settings. The result is that all comments
-will be lost from the smb.conf file. Additionally, the parameters will be written back in
-internal ordering.
-</para>
-
-<note><para>
-So before using SWAT please be warned - SWAT will completely replace your smb.conf with
-a fully optimised file that has been stripped of all comments you might have placed there
-and only non-default settings will be written to the file.
-</para></note>
-
-<sect2>
-<title>Enabling SWAT for use</title>
-
-<para>
-SWAT should be installed to run via the network super daemon. Depending on which system
-your Unix/Linux system has you will have either an <filename>inetd</filename> or
-<filename>xinetd</filename> based system.
-</para>
-
-<para>
-The nature and location of the network super-daemon varies with the operating system
-implementation. The control file (or files) can be located in the file
-<filename>/etc/inetd.conf</filename> or in the directory <filename>/etc/[x]inet.d</filename>
-or similar.
-</para>
-
-<para>
-The control entry for the older style file might be:
-</para>
-
-<para><programlisting>
- # swat is the Samba Web Administration Tool
- swat stream tcp nowait.400 root /usr/sbin/swat swat
-</programlisting></para>
-
-<para>
-A control file for the newer style xinetd could be:
-</para>
-
-<para>
-<programlisting>
- # default: off
- # description: SWAT is the Samba Web Admin Tool. Use swat \
- # to configure your Samba server. To use SWAT, \
- # connect to port 901 with your favorite web browser.
- service swat
- {
- port = 901
- socket_type = stream
- wait = no
- only_from = localhost
- user = root
- server = /usr/sbin/swat
- log_on_failure += USERID
- disable = yes
- }
-</programlisting>
-
-</para>
-
-<para>
-Both the above examples assume that the <filename>swat</filename> binary has been
-located in the <filename>/usr/sbin</filename> directory. In addition to the above
-SWAT will use a directory access point from which it will load it's help files
-as well as other control information. The default location for this on most Linux
-systems is in the directory <filename>/usr/share/samba/swat</filename>. The default
-location using samba defaults will be <filename>/usr/local/samba/swat</filename>.
-</para>
-
-<para>
-Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user
-the only permission allowed is to view certain aspects of configuration as well as
-access to the password change facility. The buttons that will be exposed to the non-root
-user are: <emphasis>HOME, STATUS, VIEW, PASSWORD</emphasis>. The only page that allows
-change capability in this case is <emphasis>PASSWORD</emphasis>.
-</para>
-
-<para>
-So long as you log onto SWAT as the user <command>root</command> you should obtain
-full change and commit ability. The buttons that will be exposed includes:
-<emphasis>HOME, GLOBALS, SHARES, PRINTERS, WIZARD, STATUS, VIEW, PASSWORD</emphasis>.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Securing SWAT through SSL</title>
-
-<para>
-Lots of people have asked about how to setup SWAT with SSL to allow for secure remote
-administration of Samba. Here is a method that works, courtesy of Markus Krieger
-</para>
-
-<para>
-Modifications to the swat setup are as following:
-</para>
-
-<itemizedlist>
- <listitem><para>
- install OpenSSL
- </para></listitem>
-
- <listitem><para>
- generate certificate and private key
-
- <programlisting>
- root# /usr/bin/openssl req -new -x509 -days 365 -nodes -config \
- /usr/share/doc/packages/stunnel/stunnel.cnf \
- -out /etc/stunnel/stunnel.pem -keyout /etc/stunnel/stunnel.pem
- </programlisting></para></listitem>
-
- <listitem><para>
- remove swat-entry from [x]inetd
- </para></listitem>
-
- <listitem><para>
- start stunnel
-
- <programlisting>
- root# stunnel -p /etc/stunnel/stunnel.pem -d 901 \
- -l /usr/local/samba/bin/swat swat
- </programlisting></para></listitem>
-</itemizedlist>
-
-<para>
-afterwards simply contact to swat by using the URL "https://myhost:901", accept the certificate
-and the SSL connection is up.
-</para>
-
-</sect2>
-
-<sect2>
-<title>The SWAT Home Page</title>
-
-<para>
-The SWAT title page provides access to the latest Samba documentation. The manual page for
-each samba component is accessible from this page as are the Samba-HOWTO-Collection (this
-document) as well as the O'Reilly book "Using Samba".
-</para>
-
-<para>
-Administrators who wish to validate their samba configuration may obtain useful information
-from the man pages for the diganostic utilities. These are available from the SWAT home page
-also. One diagnostic tool that is NOT mentioned on this page, but that is particularly
-useful is <command>ethereal</command>, available from <ulink url="http://www.ethereal.com">
-http://www.ethereal.com</ulink>.
-</para>
-
-<note><para>
-SWAT can be configured to run in <emphasis>demo</emphasis> mode. This is NOT recommended
-as it runs SWAT without authentication and with full administrative ability. ie: Allows
-changes to smb.conf as well as general operation with root privilidges. The option that
-creates this ability is the <command>-a</command> flag to swat. DO NOT USE THIS IN ANY
-PRODUCTION ENVIRONMENT - you have been warned!
-</para></note>
-
-</sect2>
-
-<sect2>
-<title>Global Settings</title>
-
-<para>
-The Globals button will expose a page that allows configuration of the global parameters
-in smb.conf. There are three levels of exposure of the parameters:
-</para>
-
-<itemizedlist>
- <listitem><para>
- <command>Basic</command> - exposes common configuration options.
- </para></listitem>
-
- <listitem><para>
- <command>Advanced</command> - exposes configuration options needed in more
- complex environments.
- </para></listitem>
-
- <listitem><para>
- <command>Developer</command> - exposes configuration options that only the brave
- will want to tamper with.
- </para></listitem>
-</itemizedlist>
-
-<para>
-To switch to other than <emphasis>Basic</emphasis> editing ability click on either the
-<emphasis>Advanced</emphasis> or the <emphasis>Developer</emphasis> dial, then click the
-<emphasis>Commit Changes</emphasis> button.
-</para>
-
-<para>
-After making any changes to configuration parameters make sure that you click on the
-<emphasis>Commit Changes</emphasis> button before moving to another area otherwise
-your changes will be immediately lost.
-</para>
-
-<note><para>
-SWAT has context sensitive help. To find out what each parameter is for simply click the
-<command>Help</command> link to the left of the configurartion parameter.
-</para></note>
-
-</sect2>
-
-<sect2>
-<title>Share Settings</title>
-
-<para>
-To affect a currenly configured share, simply click on the pull down button between the
-<emphasis>Choose Share</emphasis> and the <emphasis>Delete Share</emphasis> buttons,
-select the share you wish to operate on, then to edit the settings click on the
-<emphasis>Choose Share</emphasis> button, to delete the share simply press the
-<emphasis>Delete Share</emphasis> button.
-</para>
-
-<para>
-To create a new share, next to the button labelled <emphasis>Create Share</emphasis> enter
-into the text field the name of the share to be created, then click on the
-<emphasis>Create Share</emphasis> button.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Printers Settings</title>
-
-<para>
-To affect a currenly configured printer, simply click on the pull down button between the
-<emphasis>Choose Printer</emphasis> and the <emphasis>Delete Printer</emphasis> buttons,
-select the printer you wish to operate on, then to edit the settings click on the
-<emphasis>Choose Printer</emphasis> button, to delete the share simply press the
-<emphasis>Delete Printer</emphasis> button.
-</para>
-
-<para>
-To create a new printer, next to the button labelled <emphasis>Create Printer</emphasis> enter
-into the text field the name of the share to be created, then click on the
-<emphasis>Create Printer</emphasis> button.
-</para>
-
-</sect2>
-
-<sect2>
-<title>The SWAT Wizard</title>
-
-<para>
-The purpose if the SWAT Wizard is to help the Microsoft knowledgable network administrator
-to configure Samba with a minimum of effort.
-</para>
-
-<para>
-The Wizard page provides a tool for rewiting the smb.conf file in fully optimised format.
-This will also happen if you press the commit button. The two differ in the the rewrite button
-ignores any changes that may have been made, while the Commit button causes all changes to be
-affected.
-</para>
-
-<para>
-The <emphasis>Edit</emphasis> button permits the editing (setting) of the minimal set of
-options that may be necessary to create a working samba server.
-</para>
-
-<para>
-Finally, there are a limited set of options that will determine what type of server samba
-will be configured for, whether it will be a WINS server, participate as a WINS client, or
-operate with no WINS support. By clicking on one button you can elect to epose (or not) user
-home directories.
-</para>
-
-</sect2>
-
-<sect2>
-<title>The Status Page</title>
-
-<para>
-The status page serves a limited purpose. Firstly, it allows control of the samba daemons.
-The key daemons that create the samba server environment are: <command> smbd, nmbd, winbindd</command>.
-</para>
-
-<para>
-The daemons may be controlled individually or as a total group. Additionally, you may set
-an automatic screen refresh timing. As MS Windows clients interact with Samba new smbd processes
-will be continually spawned. The auto-refresh facility will allow you to track the changing
-conditions with minimal effort.
-</para>
-
-<para>
-Lastly, the Status page may be used to terminate specific smbd client connections in order to
-free files that may be locked.
-</para>
-
-</sect2>
-
-<sect2>
-<title>The View Page</title>
-
-<para>
-This page allows the administrator to view the optimised smb.conf file and if you are
-particularly massochistic will permit you also to see all possible global configuration
-parameters and their settings.
-</para>
-
-</sect2>
-
-<sect2>
-<title>The Password Change Page</title>
-
-<para>
-The Password Change page is a popular tool. This tool allows the creation, deletion, deactivation
-and reactivation of MS Windows networking users on the local machine. Alternatively, you can use
-this tool to change a local password for a user account.
-</para>
-
-<para>
-When logged in as a non-root account the user will have to provide the old password as well as
-the new password (twice). When logged in as <command>root</command> only the new password is
-required.
-</para>
-
-<para>
-One popular use for this tool is to change user passwords across a range of remote MS Windows
-servers.
-</para>
-
-</sect2>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Samba-BDC-HOWTO.sgml b/docs/docbook/projdoc/Samba-BDC-HOWTO.sgml
deleted file mode 100644
index 2f3b568471..0000000000
--- a/docs/docbook/projdoc/Samba-BDC-HOWTO.sgml
+++ /dev/null
@@ -1,250 +0,0 @@
-<chapter id="samba-bdc">
-
-<chapterinfo>
- &author.vl;
- <pubdate> (26 Apr 2001) </pubdate>
-</chapterinfo>
-
-<title>
-Samba Backup Domain Controller to Samba Domain Control
-</title>
-
-<sect1>
-<title>Prerequisite Reading</title>
-
-<para>
-Before you continue reading in this chapter, please make sure
-that you are comfortable with configuring a Samba PDC
-as described in the <ulink url="Samba-PDC-HOWTO.html">Samba-PDC-HOWTO</ulink>.
-</para>
-
-
-</sect1>
-
-<sect1>
-
-<title>Background</title>
-
-<para>
-What is a Domain Controller? It is a machine that is able to answer
-logon requests from workstations in a Windows NT Domain. Whenever a
-user logs into a Windows NT Workstation, the workstation connects to a
-Domain Controller and asks him whether the username and password the
-user typed in is correct. The Domain Controller replies with a lot of
-information about the user, for example the place where the users
-profile is stored, the users full name of the user. All this
-information is stored in the NT user database, the so-called SAM.
-</para>
-
-<para>
-There are two kinds of Domain Controller in a NT 4 compatible Domain:
-A Primary Domain Controller (PDC) and one or more Backup Domain
-Controllers (BDC). The PDC contains the master copy of the
-SAM. Whenever the SAM has to change, for example when a user changes
-his password, this change has to be done on the PDC. A Backup Domain
-Controller is a machine that maintains a read-only copy of the
-SAM. This way it is able to reply to logon requests and authenticate
-users in case the PDC is not available. During this time no changes to
-the SAM are possible. Whenever changes to the SAM are done on the PDC,
-all BDC receive the changes from the PDC.
-</para>
-
-<para>
-Since version 2.2 Samba officially supports domain logons for all
-current Windows Clients, including Windows 2000 and XP. This text
-assumes the domain to be named SAMBA. To be able to act as a PDC, some
-parameters in the [global]-section of the smb.conf have to be set:
-</para>
-
-<para><programlisting>
- workgroup = SAMBA
- domain master = yes
- domain logons = yes
-</programlisting></para>
-
-<para>
-Several other things like a [homes] and a [netlogon] share also may be
-set along with settings for the profile path, the users home drive and
-others. This will not be covered in this document.
-</para>
-
-</sect1>
-
-
-<sect1>
-<title>What qualifies a Domain Controller on the network?</title>
-
-<para>
-Every machine that is a Domain Controller for the domain SAMBA has to
-register the NetBIOS group name SAMBA#1c with the WINS server and/or
-by broadcast on the local network. The PDC also registers the unique
-NetBIOS name SAMBA#1b with the WINS server. The name type #1b is
-normally reserved for the domain master browser, a role that has
-nothing to do with anything related to authentication, but the
-Microsoft Domain implementation requires the domain master browser to
-be on the same machine as the PDC.
-</para>
-
-
-<sect2>
-<title>How does a Workstation find its domain controller?</title>
-
-<para>
-A NT workstation in the domain SAMBA that wants a local user to be
-authenticated has to find the domain controller for SAMBA. It does
-this by doing a NetBIOS name query for the group name SAMBA#1c. It
-assumes that each of the machines it gets back from the queries is a
-domain controller and can answer logon requests. To not open security
-holes both the workstation and the selected (TODO: How is the DC
-chosen) domain controller authenticate each other. After that the
-workstation sends the user's credentials (his name and password) to
-the domain controller, asking for approval.
-</para>
-
-</sect2>
-
-
-<sect2>
-<title>When is the PDC needed?</title>
-
-<para>
-Whenever a user wants to change his password, this has to be done on
-the PDC. To find the PDC, the workstation does a NetBIOS name query
-for SAMBA#1b, assuming this machine maintains the master copy of the
-SAM. The workstation contacts the PDC, both mutually authenticate and
-the password change is done.
-</para>
-
-</sect2>
-
-</sect1>
-
-
-<sect1>
-<title>Can Samba be a Backup Domain Controller to an NT PDC?</title>
-
-<para>
-With version 2.2, no. The native NT SAM replication protocols have
-not yet been fully implemented. The Samba Team is working on
-understanding and implementing the protocols, but this work has not
-been finished for version 2.2.
-</para>
-
-<para>
-With version 3.0, the work on both the replication protocols and a
-suitable storage mechanism has progressed, and some form of NT4 BDC
-support is expected soon.
-</para>
-
-<para>
-Can I get the benefits of a BDC with Samba? Yes. The main reason for
-implementing a BDC is availability. If the PDC is a Samba machine,
-a second Samba machine can be set up to
-service logon requests whenever the PDC is down.
-</para>
-
-</sect1>
-
-
-<sect1>
-<title>How do I set up a Samba BDC?</title>
-
-<para>
-Several things have to be done:
-</para>
-
-<itemizedlist>
-
-<listitem><para>
-The domain SID has to be the same on the PDC and the BDC. This used to
-be stored in the file private/MACHINE.SID. This file is not created
-anymore since Samba 2.2.5 or even earlier. Nowadays the domain SID is
-stored in the file private/secrets.tdb. Simply copying the secrets.tdb
-from the PDC to the BDC does not work, as the BDC would
-generate a new SID for itself and override the domain SID with this
-new BDC SID.</para>
-
-<para>
-To retrieve the domain SID from the PDC or an existing BDC and store it in the
-secrets.tdb, execute 'net rpc getsid' on the BDC.
-</para></listitem>
-
-<listitem><para>
-The Unix user database has to be synchronized from the PDC to the
-BDC. This means that both the /etc/passwd and /etc/group have to be
-replicated from the PDC to the BDC. This can be done manually
-whenever changes are made, or the PDC is set up as a NIS master
-server and the BDC as a NIS slave server. To set up the BDC as a
-mere NIS client would not be enough, as the BDC would not be able to
-access its user database in case of a PDC failure.
-</para>
-</listitem>
-
-<listitem><para>
-The Samba password database in the file private/smbpasswd has to be
-replicated from the PDC to the BDC. This is a bit tricky, see the
-next section.
-</para></listitem>
-
-<listitem><para>
-Any netlogon share has to be replicated from the PDC to the
-BDC. This can be done manually whenever login scripts are changed,
-or it can be done automatically together with the smbpasswd
-synchronization.
-</para></listitem>
-
-</itemizedlist>
-
-<para>
-Finally, the BDC has to be found by the workstations. This can be done
-by setting
-</para>
-
-<para><programlisting>
- workgroup = samba
- domain master = no
- domain logons = yes
-</programlisting></para>
-
-<para>
-in the [global]-section of the smb.conf of the BDC. This makes the BDC
-only register the name SAMBA#1c with the WINS server. This is no
-problem as the name SAMBA#1c is a NetBIOS group name that is meant to
-be registered by more than one machine. The parameter 'domain master =
-no' forces the BDC not to register SAMBA#1b which as a unique NetBIOS
-name is reserved for the Primary Domain Controller.
-</para>
-
-<sect2>
-<title>How do I replicate the smbpasswd file?</title>
-
-<para>
-Replication of the smbpasswd file is sensitive. It has to be done
-whenever changes to the SAM are made. Every user's password change is
-done in the smbpasswd file and has to be replicated to the BDC. So
-replicating the smbpasswd file very often is necessary.
-</para>
-
-<para>
-As the smbpasswd file contains plain text password equivalents, it
-must not be sent unencrypted over the wire. The best way to set up
-smbpasswd replication from the PDC to the BDC is to use the utility
-rsync. rsync can use ssh as a transport. ssh itself can be set up to
-accept *only* rsync transfer without requiring the user to type a
-password.
-</para>
-
-
-</sect2>
-<sect2>
-<title>Can I do this all with LDAP?</title>
-<para>The simple answer is YES. Samba's pdb_ldap code supports
-binding to a replica LDAP server, and will also follow referrals and
-rebind to the master if it ever needs to make a modification to the
-database. (Normally BDCs are read only, so this will not occur
-often).
-</para>
-</sect2>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Samba-PDC-HOWTO.sgml b/docs/docbook/projdoc/Samba-PDC-HOWTO.sgml
deleted file mode 100644
index 6a3bcacf17..0000000000
--- a/docs/docbook/projdoc/Samba-PDC-HOWTO.sgml
+++ /dev/null
@@ -1,842 +0,0 @@
-<chapter id="samba-pdc">
-
-
-<chapterinfo>
- &author.jerry;
- &author.jht;
- <author>
- <firstname>David</firstname><surname>Bannon</surname>
- <affiliation>
- <orgname>Samba Team</orgname>
- <address><email>dbannon@samba.org</email></address>
- </affiliation>
- </author>
- <pubdate> (26 Apr 2001) </pubdate>
-</chapterinfo>
-
-<title>
-Samba as an NT4 or Win2k Primary Domain Controller
-</title>
-
-
-<sect1>
-<title>Prerequisite Reading</title>
-
-<para>
-Before you continue reading in this chapter, please make sure
-that you are comfortable with configuring basic files services
-in smb.conf and how to enable and administer password
-encryption in Samba. Theses two topics are covered in the
-&smb.conf; manpage.
-</para>
-
-
-</sect1>
-
-
-
-<sect1>
-<title>
-Background
-</title>
-
-<para>
-This article outlines the steps necessary for configuring Samba as a PDC.
-It is necessary to have a working Samba server prior to implementing the
-PDC functionality.
-</para>
-
-<itemizedlist>
- <listitem><para>
- Domain logons for Windows NT 4.0 / 200x / XP Professional clients.
- </para></listitem>
-
- <listitem><para>
- Placing Windows 9x / Me clients in user level security
- </para></listitem>
-
- <listitem><para>
- Retrieving a list of users and groups from a Samba PDC to
- Windows 9x / Me / NT / 200x / XP Professional clients
- </para></listitem>
-
- <listitem><para>
- Roaming Profiles
- </para></listitem>
-
- <listitem><para>
- Network/System Policies
- </para></listitem>
-</itemizedlist>
-
-<note>
-<para>
-Roaming Profiles and System/Network policies are advanced network administration topics
-that are covered separately in this document.
-</para>
-</note>
-
-<para>
-The following functionalities are new to the Samba 3.0 release:
-</para>
-
-<itemizedlist>
- <listitem><para>
- Windows NT 4 domain trusts
- </para></listitem>
-
- <listitem><para>
- Adding users via the User Manager for Domains
- </para></listitem>
-</itemizedlist>
-
-<para>
-The following functionalities are NOT provided by Samba 3.0:
-</para>
-
-<itemizedlist>
- <listitem><para>
- SAM replication with Windows NT 4.0 Domain Controllers
- (i.e. a Samba PDC and a Windows NT BDC or vice versa)
- </para></listitem>
-
- <listitem><para>
- Acting as a Windows 2000 Domain Controller (i.e. Kerberos and
- Active Directory)
- </para></listitem>
-</itemizedlist>
-
-<para>
-Please note that Windows 9x / Me / XP Home clients are not true members of a domain
-for reasons outlined in this article. Therefore the protocol for
-support of Windows 9x-style domain logons is completely different
-from NT4 / Win2k type domain logons and has been officially supported for some
-time.
-</para>
-
-<para><emphasis>
-MS Windows XP Home edition is NOT able to join a domain and does not permit
-the use of domain logons.</emphasis>
-</para>
-
-
-<para>
-Implementing a Samba PDC can basically be divided into 3 broad
-steps.
-</para>
-
-<orderedlist numeration="arabic">
- <listitem><para>
- Configuring the Samba PDC
- </para></listitem>
-
- <listitem><para>
- Creating machine trust accounts and joining clients to the domain
- </para></listitem>
-
- <listitem><para>
- Adding and managing domain user accounts
- </para></listitem>
-</orderedlist>
-
-<para>
-There are other minor details such as user profiles, system
-policies, etc... However, these are not necessarily specific
-to a Samba PDC as much as they are related to Windows NT networking
-concepts.
-</para>
-
-</sect1>
-
-
-<sect1>
-<title>Configuring the Samba Domain Controller</title>
-
-<para>
-The first step in creating a working Samba PDC is to
-understand the parameters necessary in smb.conf. Here we
-attempt to explain the parameters that are covered in
-the &smb.conf; man page.
-</para>
-
-<para>
-Here is an example &smb.conf; for acting as a PDC:
-</para>
-
-<para><programlisting>
-[global]
- ; Basic server settings
- <ulink url="smb.conf.5.html#NETBIOSNAME">netbios name</ulink> = <replaceable>POGO</replaceable>
- <ulink url="smb.conf.5.html#WORKGROUP">workgroup</ulink> = <replaceable>NARNIA</replaceable>
-
- ; User and Machine Account Backends
- ; Choices are: tdbsam, tdbsam_nua, smbpasswd, smbpasswd_nua, ldapsam, ldapsam_nua, ...
- ; mysqlsam, xmlsam, guest
- <ulink url="smb.conf.5.html#PASSDBBACKEND">passdb backend</ulink> = ldapsam, guest
-
- ; we should act as the domain and local master browser
- <ulink url="smb.conf.5.html#OSLEVEL">os level</ulink> = 64
- <ulink url="smb.conf.5.html#PERFERREDMASTER">preferred master</ulink> = yes
- <ulink url="smb.conf.5.html#DOMAINMASTER">domain master</ulink> = yes
- <ulink url="smb.conf.5.html#LOCALMASTER">local master</ulink> = yes
-
- ; security settings (must user security = user)
- <ulink url="smb.conf.5.html#SECURITYEQUALSUSER">security</ulink> = user
-
- ; encrypted passwords are a requirement for a PDC
- <ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">encrypt passwords</ulink> = yes
-
- ; support domain logons
- <ulink url="smb.conf.5.html#DOMAINLOGONS">domain logons</ulink> = yes
-
- ; where to store user profiles?
- <ulink url="smb.conf.5.html#LOGONPATH">logon path</ulink> = \\%N\profiles\%u
-
- ; where is a user's home directory and where should it be mounted at?
- <ulink url="smb.conf.5.html#LOGONDRIVE">logon drive</ulink> = H:
- <ulink url="smb.conf.5.html#LOGONHOME">logon home</ulink> = \\homeserver\%u
-
- ; specify a generic logon script for all users
- ; this is a relative **DOS** path to the [netlogon] share
- <ulink url="smb.conf.5.html#LOGONSCRIPT">logon script</ulink> = logon.cmd
-
-; necessary share for domain controller
-[netlogon]
- <ulink url="smb.conf.5.html#PATH">path</ulink> = /usr/local/samba/lib/netlogon
- <ulink url="smb.conf.5.html#READONLY">read only</ulink> = yes
- <ulink url="smb.conf.5.html#WRITELIST">write list</ulink> = <replaceable>ntadmin</replaceable>
-
-; share for storing user profiles
-[profiles]
- <ulink url="smb.conf.5.html#PATH">path</ulink> = /export/smb/ntprofile
- <ulink url="smb.conf.5.html#READONLY">read only</ulink> = no
- <ulink url="smb.conf.5.html#CREATEMASK">create mask</ulink> = 0600
- <ulink url="smb.conf.5.html#DIRECTORYMASK">directory mask</ulink> = 0700
-</programlisting></para>
-
-<note><para>
-The above parameters make for a full set of parameters that may define the server's mode
-of operation. The following parameters are the essentials alone:
-
-<programlisting>
- workgroup = NARNIA
- domain logons = Yes
- security = User
-</programlisting>
-
-The additional parameters shown in the longer listing above just makes for a
-more complete environment.
-</para></note>
-
-<para>
-There are a couple of points to emphasize in the above configuration.
-</para>
-
-<itemizedlist>
- <listitem><para>
- Encrypted passwords must be enabled. For more details on how
- to do this, refer to <link linkend="passdb">the User Database chapter</link>.
- </para></listitem>
-
- <listitem><para>
- The server must support domain logons and a
- <filename>[netlogon]</filename> share
- </para></listitem>
-
- <listitem><para>
- The server must be the domain master browser in order for Windows
- client to locate the server as a DC. Please refer to the various
- Network Browsing documentation included with this distribution for
- details.
- </para></listitem>
-</itemizedlist>
-
-<para>
-Samba 3.0 offers a complete implementation of group mapping
-between Windows NT groups and Unix groups (this is really quite
-complicated to explain in a short space).
-</para>
-
-</sect1>
-
-
-<sect1>
-<title>Creating Machine Trust Accounts and Joining Clients to the Domain</title>
-
-<para>
-A machine trust account is a Samba account that is used to
-authenticate a client machine (rather than a user) to the Samba
-server. In Windows terminology, this is known as a "Computer
-Account."</para>
-
-<para>
-The password of a machine trust account acts as the shared secret for
-secure communication with the Domain Controller. This is a security
-feature to prevent an unauthorized machine with the same NetBIOS name
-from joining the domain and gaining access to domain user/group
-accounts. Windows NT, 200x, XP Professional clients use machine trust
-accounts, but Windows 9x / Me / XP Home clients do not. Hence, a
-Windows 9x / Me / XP Home client is never a true member of a domain
-because it does not possess a machine trust account, and thus has no
-shared secret with the domain controller.
-</para>
-
-<para>A Windows PDC stores each machine trust account in the Windows
-Registry. A Samba-3 PDC also has to store machine trust account information
-in a suitable backend data store. With Samba-3 there can be multiple back-ends
-for this including:
-</para>
-
-<itemizedlist>
- <listitem><para>
- <emphasis>smbpasswd</emphasis> - the plain ascii file stored used by
- earlier versions of Samba. This file configuration option requires
- a Unix/Linux system account for EVERY entry (ie: both for user and for
- machine accounts). This file will be located in the <emphasis>private</emphasis>
- directory (default is /usr/local/samba/lib/private or on linux /etc/samba).
- </para></listitem>
-
- <listitem><para>
- <emphasis>smbpasswd_nua</emphasis> - This file is independant of the
- system wide user accounts. The use of this back-end option requires
- specification of the "non unix account range" option also. It is called
- smbpasswd and will be located in the <filename>private</filename> directory.
- </para></listitem>
-
- <listitem><para>
- <emphasis>tdbsam</emphasis> - a binary database backend that will be
- stored in the <emphasis>private</emphasis> directory in a file called
- <emphasis>passwd.tdb</emphasis>. The key benefit of this binary format
- file is that it can store binary objects that can not be accomodated
- in the traditional plain text smbpasswd file.
- </para></listitem>
-
- <listitem><para>
- <emphasis>tdbsam_nua</emphasis> like the smbpasswd_nua option above, this
- file allows the creation of arbitrary user and machine accounts without
- requiring that account to be added to the system (/etc/passwd) file. It
- too requires the specification of the "non unix account range" option
- in the [globals] section of the &smb.conf; file.
- </para></listitem>
-
- <listitem><para>
- <emphasis>ldapsam</emphasis> - An LDAP based back-end. Permits the
- LDAP server to be specified. eg: ldap://localhost or ldap://frodo.murphy.com
- </para></listitem>
-
- <listitem><para>
- <emphasis>ldapsam_nua</emphasis> - LDAP based back-end with no unix
- account requirement, like smbpasswd_nua and tdbsam_nua above.
- </para></listitem>
-</itemizedlist>
-
-<para>Read the chapter about the <link linkend="passdb">User Database</link>
-for details.</para>
-
-<note><para>
-The new tdbsam and ldapsam account backends store vastly more information than
-smbpasswd is capable of. The new backend database includes capacity to specify
-per user settings for many parameters, over-riding global settings given in the
-<filename>smb.conf</filename> file. eg: logon drive, logon home, logon path, etc.
-</para></note>
-
-<para>
-A Samba PDC, however, stores each machine trust account in two parts,
-as follows:
-
-<itemizedlist>
- <listitem><para>A Samba account, stored in the same location as user
- LanMan and NT password hashes (currently
- <filename>smbpasswd</filename>). The Samba account
- possesses and uses only the NT password hash.</para></listitem>
-
- <listitem><para>A corresponding Unix account, typically stored in
- <filename>/etc/passwd</filename>. (Future releases will alleviate the need to
- create <filename>/etc/passwd</filename> entries.) </para></listitem>
-</itemizedlist>
-</para>
-
-<para>
-There are two ways to create machine trust accounts:
-</para>
-
-<itemizedlist>
- <listitem><para> Manual creation. Both the Samba and corresponding
- Unix account are created by hand.</para></listitem>
-
- <listitem><para> "On-the-fly" creation. The Samba machine trust
- account is automatically created by Samba at the time the client
- is joined to the domain. (For security, this is the
- recommended method.) The corresponding Unix account may be
- created automatically or manually. </para>
- </listitem>
-
-</itemizedlist>
-
-<sect2>
-<title>Manual Creation of Machine Trust Accounts</title>
-
-<para>
-The first step in manually creating a machine trust account is to
-manually create the corresponding Unix account in
-<filename>/etc/passwd</filename>. This can be done using
-<command>vipw</command> or other 'add user' command that is normally
-used to create new Unix accounts. The following is an example for a
-Linux based Samba server:
-</para>
-
-<para>
- <prompt>root# </prompt><command>/usr/sbin/useradd -g 100 -d /dev/null -c <replaceable>"machine
-nickname"</replaceable> -s /bin/false <replaceable>machine_name</replaceable>$ </command>
-</para>
-<para>
-<prompt>root# </prompt><command>passwd -l <replaceable>machine_name</replaceable>$</command>
-</para>
-
-<para>On *BSD systems, this can be done using the 'chpass' utility:</para>
-
-<para>
-<prompt>root# </prompt><command>chpass -a "<replaceable>machine_name</replaceable>$:*:101:100::0:0:Workstation <replaceable>machine_name</replaceable>:/dev/null:/sbin/nologin"</command>
-</para>
-
-<para>
-The <filename>/etc/passwd</filename> entry will list the machine name
-with a "$" appended, won't have a password, will have a null shell and no
-home directory. For example a machine named 'doppy' would have an
-<filename>/etc/passwd</filename> entry like this:
-</para>
-
-<para><programlisting>
-doppy$:x:505:501:<replaceable>machine_nickname</replaceable>:/dev/null:/bin/false
-</programlisting></para>
-
-<para>
-Above, <replaceable>machine_nickname</replaceable> can be any
-descriptive name for the client, i.e., BasementComputer.
-<replaceable>machine_name</replaceable> absolutely must be the NetBIOS
-name of the client to be joined to the domain. The "$" must be
-appended to the NetBIOS name of the client or Samba will not recognize
-this as a machine trust account.
-</para>
-
-
-<para>
-Now that the corresponding Unix account has been created, the next step is to create
-the Samba account for the client containing the well-known initial
-machine trust account password. This can be done using the <ulink
-url="smbpasswd.8.html"><command>smbpasswd(8)</command></ulink> command
-as shown here:
-</para>
-
-<para>
-<prompt>root# </prompt><userinput>smbpasswd -a -m <replaceable>machine_name</replaceable></userinput>
-</para>
-
-<para>
-where <replaceable>machine_name</replaceable> is the machine's NetBIOS
-name. The RID of the new machine account is generated from the UID of
-the corresponding Unix account.
-</para>
-
-<warning>
- <title>Join the client to the domain immediately</title>
-
- <para>
- Manually creating a machine trust account using this method is the
- equivalent of creating a machine trust account on a Windows NT PDC using
- the "Server Manager". From the time at which the account is created
- to the time which the client joins the domain and changes the password,
- your domain is vulnerable to an intruder joining your domain using
- a machine with the same NetBIOS name. A PDC inherently trusts
- members of the domain and will serve out a large degree of user
- information to such clients. You have been warned!
- </para>
-</warning>
-</sect2>
-
-
-<sect2>
-<title>"On-the-Fly" Creation of Machine Trust Accounts</title>
-
-<para>
-The second (and recommended) way of creating machine trust accounts is
-simply to allow the Samba server to create them as needed when the client
-is joined to the domain. </para>
-
-<para>Since each Samba machine trust account requires a corresponding
-Unix account, a method for automatically creating the
-Unix account is usually supplied; this requires configuration of the
-<ulink url="smb.conf.5.html#ADDUSERSCRIPT">add user script</ulink>
-option in <filename>smb.conf</filename>. This
-method is not required, however; corresponding Unix accounts may also
-be created manually.
-</para>
-
-
-<para>Below is an example for a RedHat 6.2 Linux system.
-</para>
-
-<para><programlisting>
-[global]
- # &lt;...remainder of parameters...&gt;
- add user script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u
-</programlisting></para>
-
-</sect2>
-
-
-<sect2><title>Joining the Client to the Domain</title>
-
-<para>
-The procedure for joining a client to the domain varies with the
-version of Windows.
-</para>
-
-<itemizedlist>
-<listitem><para><emphasis>Windows 2000</emphasis></para>
-
- <para>
- When the user elects to join the client to a domain, Windows prompts for
- an account and password that is privileged to join the domain. A Samba administrative
- account (i.e., a Samba account that has root privileges on the Samba server) must be
- entered here; the operation will fail if an ordinary user account is given.
- The password for this account should be set to a different password than the associated
- <filename>/etc/passwd</filename> entry, for security reasons.
- </para>
-
- <para>
- The session key of the Samba administrative account acts as an
- encryption key for setting the password of the machine trust
- account. The machine trust account will be created on-the-fly, or
- updated if it already exists.
- </para>
-
-</listitem>
-
-<listitem><para><emphasis>Windows NT</emphasis></para>
-
- <para> If the machine trust account was created manually, on the
- Identification Changes menu enter the domain name, but do not
- check the box "Create a Computer Account in the Domain." In this case,
- the existing machine trust account is used to join the machine to
- the domain.</para>
-
- <para> If the machine trust account is to be created
- on-the-fly, on the Identification Changes menu enter the domain
- name, and check the box "Create a Computer Account in the Domain." In
- this case, joining the domain proceeds as above for Windows 2000
- (i.e., you must supply a Samba administrative account when
- prompted).</para>
-</listitem>
-
-<listitem><para><emphasis>Samba</emphasis></para>
- <para>Joining a samba client to a domain is documented in
- the <link linkend="domain-member">Domain Member</link> chapter.
-</para></listitem>
-</itemizedlist>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Common Problems and Errors</title>
-
-<sect2>
-<title>I cannot include a '$' in a machine name</title>
-<para>
-A 'machine name' in (typically) <filename>/etc/passwd</filename>
-of the machine name with a '$' appended. FreeBSD (and other BSD
-systems?) won't create a user with a '$' in their name.
-</para>
-
-<para>
-The problem is only in the program used to make the entry. Once made, it works perfectly.
-Create a user without the '$' using <command>vipw</command> to edit the entry, adding
-the '$'. Or create the whole entry with vipw if you like, make sure you use a unique User ID!
-</para>
-</sect2>
-
-<sect2>
-<title>I get told "You already have a connection to the Domain...."
-or "Cannot join domain, the credentials supplied conflict with an
-existing set.." when creating a machine trust account.</title>
-
-<para>
-This happens if you try to create a machine trust account from the
-machine itself and already have a connection (e.g. mapped drive)
-to a share (or IPC$) on the Samba PDC. The following command
-will remove all network drive connections:
-</para>
-
-<para>
-<prompt>C:\WINNT\></prompt> <command>net use * /d</command>
-</para>
-
-<para>
-Further, if the machine is already a 'member of a workgroup' that
-is the same name as the domain you are joining (bad idea) you will
-get this message. Change the workgroup name to something else, it
-does not matter what, reboot, and try again.
-</para>
-</sect2>
-
-<sect2>
-<title>The system can not log you on (C000019B)....</title>
-
-<para>I joined the domain successfully but after upgrading
-to a newer version of the Samba code I get the message, "The system
-can not log you on (C000019B), Please try again or consult your
-system administrator" when attempting to logon.
-</para>
-
-<para>
-This occurs when the domain SID stored in the secrets.tdb database
-is changed. The most common cause of a change in domain SID is when
-the domain name and/or the server name (netbios name) is changed.
-The only way to correct the problem is to restore the original domain
-SID or remove the domain client from the domain and rejoin. The domain
-SID may be reset using either the net or rpcclient utilities.
-</para>
-
-<para>
-The reset or change the domain SID you can use the net command as follows:
-
-<programlisting>
- net getlocalsid 'OLDNAME'
- net setlocalsid 'SID'
-</programlisting>
-</para>
-
-</sect2>
-
-<sect2>
-<title>The machine trust account for this computer either does not
-exist or is not accessible.</title>
-
-<para>
-When I try to join the domain I get the message "The machine account
-for this computer either does not exist or is not accessible". What's
-wrong?
-</para>
-
-<para>
-This problem is caused by the PDC not having a suitable machine trust account.
-If you are using the <parameter>add user script</parameter> method to create
-accounts then this would indicate that it has not worked. Ensure the domain
-admin user system is working.
-</para>
-
-<para>
-Alternatively if you are creating account entries manually then they
-have not been created correctly. Make sure that you have the entry
-correct for the machine trust account in smbpasswd file on the Samba PDC.
-If you added the account using an editor rather than using the smbpasswd
-utility, make sure that the account name is the machine NetBIOS name
-with a '$' appended to it ( i.e. computer_name$ ). There must be an entry
-in both /etc/passwd and the smbpasswd file. Some people have reported
-that inconsistent subnet masks between the Samba server and the NT
-client have caused this problem. Make sure that these are consistent
-for both client and server.
-</para>
-</sect2>
-
-<sect2>
-<title>When I attempt to login to a Samba Domain from a NT4/W2K workstation,
-I get a message about my account being disabled.</title>
-
-<para>
-At first be ensure to enable the useraccounts with <command>smbpasswd -e
-%user%</command>, this is normally done, when you create an account.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Domain Control for Windows 9x/ME</title>
-
-<para>
-A domain and a workgroup are exactly the same thing in terms of network
-browsing. The difference is that a distributable authentication
-database is associated with a domain, for secure login access to a
-network. Also, different access rights can be granted to users if they
-successfully authenticate against a domain logon server. Samba-3 does this
-now in the same way that MS Windows NT/2K.
-</para>
-
-<para>
-The SMB client logging on to a domain has an expectation that every other
-server in the domain should accept the same authentication information.
-Network browsing functionality of domains and workgroups is identical and
-is explained in this documentation under the browsing discussions.
-It should be noted, that browsing is totally orthogonal to logon support.
-</para>
-
-<para>
-Issues related to the single-logon network model are discussed in this
-section. Samba supports domain logons, network logon scripts, and user
-profiles for MS Windows for workgroups and MS Windows 9X/ME clients
-which are the focus of this section.
-</para>
-
-
-<para>
-When an SMB client in a domain wishes to logon it broadcast requests for a
-logon server. The first one to reply gets the job, and validates its
-password using whatever mechanism the Samba administrator has installed.
-It is possible (but very stupid) to create a domain where the user
-database is not shared between servers, i.e. they are effectively workgroup
-servers advertising themselves as participating in a domain. This
-demonstrates how authentication is quite different from but closely
-involved with domains.
-</para>
-
-
-<para>
-Using these features you can make your clients verify their logon via
-the Samba server; make clients run a batch file when they logon to
-the network and download their preferences, desktop and start menu.
-</para>
-
-<para>
-Before launching into the configuration instructions, it is
-worthwhile to look at how a Windows 9x/ME client performs a logon:
-</para>
-
-<orderedlist>
-<listitem>
- <para>
- The client broadcasts (to the IP broadcast address of the subnet it is in)
- a NetLogon request. This is sent to the NetBIOS name DOMAIN&lt;1c&gt; at the
- NetBIOS layer. The client chooses the first response it receives, which
- contains the NetBIOS name of the logon server to use in the format of
- \\SERVER.
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then connects to that server, logs on (does an SMBsessetupX) and
- then connects to the IPC$ share (using an SMBtconX).
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then does a NetWkstaUserLogon request, which retrieves the name
- of the user's logon script.
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then connects to the NetLogon share and searches for this
- and if it is found and can be read, is retrieved and executed by the client.
- After this, the client disconnects from the NetLogon share.
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then sends a NetUserGetInfo request to the server, to retrieve
- the user's home share, which is used to search for profiles. Since the
- response to the NetUserGetInfo request does not contain much more then
- the user's home share, profiles for Win9X clients MUST reside in the user
- home directory.
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then connects to the user's home share and searches for the
- user's profile. As it turns out, you can specify the user's home share as
- a sharename and path. For example, \\server\fred\.profile.
- If the profiles are found, they are implemented.
- </para>
-</listitem>
-
-<listitem>
- <para>
- The client then disconnects from the user's home share, and reconnects to
- the NetLogon share and looks for CONFIG.POL, the policies file. If this is
- found, it is read and implemented.
- </para>
-</listitem>
-</orderedlist>
-
-
-<sect2>
-<title>Configuration Instructions: Network Logons</title>
-
-<para>
-The main difference between a PDC and a Windows 9x logon
-server configuration is that
-</para>
-
-<itemizedlist>
-
-<listitem><para>
-Password encryption is not required for a Windows 9x logon server.
-</para></listitem>
-
-<listitem><para>
-Windows 9x/ME clients do not possess machine trust accounts.
-</para></listitem>
-
-</itemizedlist>
-
-<para>
-Therefore, a Samba PDC will also act as a Windows 9x logon
-server.
-</para>
-
-
-<warning>
-<title>security mode and master browsers</title>
-
-<para>
-There are a few comments to make in order to tie up some
-loose ends. There has been much debate over the issue of whether
-or not it is ok to configure Samba as a Domain Controller in security
-modes other than <constant>USER</constant>. The only security mode
-which will not work due to technical reasons is <constant>SHARE</constant>
-mode security. <constant>DOMAIN</constant> and <constant>SERVER</constant>
-mode security is really just a variation on SMB user level security.
-</para>
-
-<para>
-Actually, this issue is also closely tied to the debate on whether
-or not Samba must be the domain master browser for its workgroup
-when operating as a DC. While it may technically be possible
-to configure a server as such (after all, browsing and domain logons
-are two distinctly different functions), it is not a good idea to do
-so. You should remember that the DC must register the DOMAIN#1b NetBIOS
-name. This is the name used by Windows clients to locate the DC.
-Windows clients do not distinguish between the DC and the DMB.
-For this reason, it is very wise to configure the Samba DC as the DMB.
-</para>
-
-<para>
-Now back to the issue of configuring a Samba DC to use a mode other
-than "security = user". If a Samba host is configured to use
-another SMB server or DC in order to validate user connection
-requests, then it is a fact that some other machine on the network
-(the "password server") knows more about the user than the Samba host.
-99% of the time, this other host is a domain controller. Now
-in order to operate in domain mode security, the "workgroup" parameter
-must be set to the name of the Windows NT domain (which already
-has a domain controller, right?)
-</para>
-
-<para>
-Therefore configuring a Samba box as a DC for a domain that
-already by definition has a PDC is asking for trouble.
-Therefore, you should always configure the Samba DC to be the DMB
-for its domain.
-</para>
-</warning>
-
-</sect2>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/ServerType.sgml b/docs/docbook/projdoc/ServerType.sgml
deleted file mode 100644
index 7229a50201..0000000000
--- a/docs/docbook/projdoc/ServerType.sgml
+++ /dev/null
@@ -1,143 +0,0 @@
-<chapter id="ServerType">
-<chapterinfo>
- &author.jht;
-</chapterinfo>
-
-<title>Nomenclature of Server Types</title>
-
-<para>Adminstrators of Microsoft networks often refer to there being three
-different type of servers:</para>
-
-<itemizedlist>
- <listitem><para>Stand Alone Server</para></listitem>
- <listitem><para>Domain Member Server</para></listitem>
- <listitem><para>Domain Controller</para>
- <itemizedlist>
- <listitem><para>Primary Domain Controller</para></listitem>
- <listitem><para>Backup Domain Controller</para></listitem>
- <listitem><para>ADS Domain Controller</para></listitem>
- </itemizedlist>
- </listitem>
-</itemizedlist>
-
-<para>A network administrator who is familiar with these terms and who
-wishes to migrate to or use Samba will want to know what these terms mean
-within a Samba context.</para>
-
-<sect1>
-<title>Stand Alone Server</title>
-
-<para>
-The term <emphasis>stand alone server</emphasis> means that the server
-will provide local authentication and access control for all resources
-that are available from it. In general this means that there will be a
-local user database. In more technical terms, it means that resources
-on the machine will either be made available in either SHARE mode or in
-USER mode. SHARE mode and USER mode security are documented under
-discussions regarding "security mode". The smb.conf configuration parameters
-that control security mode are: "security = user" and "security = share".
-</para>
-
-<para>
-No special action is needed other than to create user accounts. Stand-alone
-servers do NOT provide network logon services, meaning that machines that
-use this server do NOT perform a domain logon but instead make use only of
-the MS Windows logon which is local to the MS Windows workstation/server.
-</para>
-
-<para>
-Samba tends to blur the distinction a little in respect of what is
-a stand alone server. This is because the authentication database may be
-local or on a remote server, even if from the samba protocol perspective
-the samba server is NOT a member of a domain security context.
-</para>
-
-<para>
-Through the use of PAM (Pluggable Authentication Modules) and nsswitch
-(the name service switcher) the source of authentication may reside on
-another server. We would be inclined to call this the authentication server.
-This means that the samba server may use the local Unix/Linux system
-password database (/etc/passwd or /etc/shadow), may use a local smbpasswd
-file (/etc/samba/smbpasswd or /usr/local/samba/lib/private/smbpasswd), or
-may use an LDAP back end, or even via PAM and Winbind another CIFS/SMB
-server for authentication.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Domain Member Server</title>
-
-<para>
-This mode of server operation involves the samba machine being made a member
-of a domain security context. This means by definition that all user authentication
-will be done from a centrally defined authentication regime. The authentication
-regime may come from an NT3/4 style (old domain technology) server, or it may be
-provided from an Active Directory server (ADS) running on MS Windows 2000 or later.
-</para>
-
-<para><emphasis>
-Of course it should be clear that the authentication back end itself could be from any
-distributed directory architecture server that is supported by Samba. This can be
-LDAP (from OpenLDAP), or Sun's iPlanet, of NetWare Directory Server, etc.
-</emphasis></para>
-
-<para>
-Please refer to the section on Howto configure Samba as a Primary Domain Controller
-and for more information regarding how to create a domain machine account for a
-domain member server as well as for information regarding how to enable the samba
-domain member machine to join the domain and to be fully trusted by it.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Domain Controller</title>
-
-<para>
-Over the years public perceptions of what Domain Control really is has taken on an
-almost mystical nature. Before we branch into a brief overview of what Domain Control
-is the following types of controller are known:
-</para>
-
-<sect2>
-<title>Domain Controller Types</title>
-
-<simplelist>
- <member>Primary Domain Controller</member>
- <member>Backup Domain Controller</member>
- <member>ADS Domain Controller</member>
-</simplelist>
-
-<para>
-The <emphasis>Primary Domain Controller</emphasis> or PDC plays an important role in the MS
-Windows NT3 and NT4 Domain Control architecture, but not in the manner that so many
-expect. The PDC seeds the Domain Control database (a part of the Windows registry) and
-it plays a key part in synchronisation of the domain authentication database.
-</para>
-
-<para>
-New to Samba-3.0.0 is the ability to use a back-end file that holds the same type of data as
-the NT4 style SAM (Security Account Manager) database (one of the registry files).
-The samba-3.0.0 SAM can be specified via the smb.conf file parameter "passwd backend" and
-valid options include <emphasis> smbpasswd tdbsam ldapsam nisplussam plugin unixsam</emphasis>.
-The smbpasswd, tdbsam and ldapsam options can have a "_nua" suffix to indicate that No Unix
-Accounts need to be created. In other words, the Samba SAM will be independant of Unix/Linux
-system accounts, provided a uid range is defined from which SAM accounts can be created.
-</para>
-
-<para>
-The <emphasis>Backup Domain Controller</emphasis> or BDC plays a key role in servicing network
-authentication requests. The BDC is biased to answer logon requests so that on a network segment
-that has a BDC and a PDC the BDC will be most likely to service network logon requests. The PDC will
-answer network logon requests when the BDC is too busy (high load). A BDC can be promoted to
-a PDC. If the PDC is on line at the time that the BDC is promoted to PDC the previous PDC is
-automatically demoted to a BDC.
-</para>
-
-<para>
-At this time Samba is NOT capable of acting as an <emphasis>ADS Domain Controller</emphasis>.
-</para>
-</sect2>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/Speed.sgml b/docs/docbook/projdoc/Speed.sgml
deleted file mode 100644
index 2509883916..0000000000
--- a/docs/docbook/projdoc/Speed.sgml
+++ /dev/null
@@ -1,211 +0,0 @@
-<chapter id="speed">
-
-<chapterinfo>
- <author>
- <firstname>Paul</firstname><surname>Cochrane</surname>
- <affiliation>
- <orgname>Dundee Limb Fitting Centre</orgname>
- <address><email>paulc@dth.scot.nhs.uk</email></address>
- </affiliation>
- </author>
- &author.jelmer;
-</chapterinfo>
-
-<title>Samba performance issues</title>
-
-<sect1>
-<title>Comparisons</title>
-
-<para>
-The Samba server uses TCP to talk to the client. Thus if you are
-trying to see if it performs well you should really compare it to
-programs that use the same protocol. The most readily available
-programs for file transfer that use TCP are ftp or another TCP based
-SMB server.
-</para>
-
-<para>
-If you want to test against something like a NT or WfWg server then
-you will have to disable all but TCP on either the client or
-server. Otherwise you may well be using a totally different protocol
-(such as Netbeui) and comparisons may not be valid.
-</para>
-
-<para>
-Generally you should find that Samba performs similarly to ftp at raw
-transfer speed. It should perform quite a bit faster than NFS,
-although this very much depends on your system.
-</para>
-
-<para>
-Several people have done comparisons between Samba and Novell, NFS or
-WinNT. In some cases Samba performed the best, in others the worst. I
-suspect the biggest factor is not Samba vs some other system but the
-hardware and drivers used on the various systems. Given similar
-hardware Samba should certainly be competitive in speed with other
-systems.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Socket options</title>
-
-<para>
-There are a number of socket options that can greatly affect the
-performance of a TCP based server like Samba.
-</para>
-
-<para>
-The socket options that Samba uses are settable both on the command
-line with the -O option, or in the smb.conf file.
-</para>
-
-<para>
-The <command>socket options</command> section of the &smb.conf; manual page describes how
-to set these and gives recommendations.
-</para>
-
-<para>
-Getting the socket options right can make a big difference to your
-performance, but getting them wrong can degrade it by just as
-much. The correct settings are very dependent on your local network.
-</para>
-
-<para>
-The socket option TCP_NODELAY is the one that seems to make the
-biggest single difference for most networks. Many people report that
-adding <command>socket options = TCP_NODELAY</command> doubles the read
-performance of a Samba drive. The best explanation I have seen for this is
-that the Microsoft TCP/IP stack is slow in sending tcp ACKs.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Read size</title>
-
-<para>
-The option <command>read size</command> affects the overlap of disk
-reads/writes with network reads/writes. If the amount of data being
-transferred in several of the SMB commands (currently SMBwrite, SMBwriteX and
-SMBreadbraw) is larger than this value then the server begins writing
-the data before it has received the whole packet from the network, or
-in the case of SMBreadbraw, it begins writing to the network before
-all the data has been read from disk.
-</para>
-
-<para>
-This overlapping works best when the speeds of disk and network access
-are similar, having very little effect when the speed of one is much
-greater than the other.
-</para>
-
-<para>
-The default value is 16384, but very little experimentation has been
-done yet to determine the optimal value, and it is likely that the best
-value will vary greatly between systems anyway. A value over 65536 is
-pointless and will cause you to allocate memory unnecessarily.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Max xmit</title>
-
-<para>
-At startup the client and server negotiate a <command>maximum transmit</command> size,
-which limits the size of nearly all SMB commands. You can set the
-maximum size that Samba will negotiate using the <command>max xmit = </command> option
-in &smb.conf;. Note that this is the maximum size of SMB requests that
-Samba will accept, but not the maximum size that the *client* will accept.
-The client maximum receive size is sent to Samba by the client and Samba
-honours this limit.
-</para>
-
-<para>
-It defaults to 65536 bytes (the maximum), but it is possible that some
-clients may perform better with a smaller transmit unit. Trying values
-of less than 2048 is likely to cause severe problems.
-</para>
-
-<para>
-In most cases the default is the best option.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Log level</title>
-
-<para>
-If you set the log level (also known as <command>debug level</command>) higher than 2
-then you may suffer a large drop in performance. This is because the
-server flushes the log file after each operation, which can be very
-expensive.
-</para>
-</sect1>
-
-<sect1>
-<title>Read raw</title>
-
-<para>
-The <command>read raw</command> operation is designed to be an optimised, low-latency
-file read operation. A server may choose to not support it,
-however. and Samba makes support for <command>read raw</command> optional, with it
-being enabled by default.
-</para>
-
-<para>
-In some cases clients don't handle <command>read raw</command> very well and actually
-get lower performance using it than they get using the conventional
-read operations.
-</para>
-
-<para>
-So you might like to try <command>read raw = no</command> and see what happens on your
-network. It might lower, raise or not affect your performance. Only
-testing can really tell.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Write raw</title>
-
-<para>
-The <command>write raw</command> operation is designed to be an optimised, low-latency
-file write operation. A server may choose to not support it,
-however. and Samba makes support for <command>write raw</command> optional, with it
-being enabled by default.
-</para>
-
-<para>
-Some machines may find <command>write raw</command> slower than normal write, in which
-case you may wish to change this option.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Slow Logins</title>
-
-<para>
-Slow logins are almost always due to the password checking time. Using
-the lowest practical <command>password level</command> will improve things.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Client tuning</title>
-
-<para>
-Often a speed problem can be traced to the client. The client (for
-example Windows for Workgroups) can often be tuned for better TCP
-performance. Check the sections on the various clients in
-<link linkend="Other-Clients">Samba and Other Clients</link>.
-</para>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/UNIX_INSTALL.sgml b/docs/docbook/projdoc/UNIX_INSTALL.sgml
deleted file mode 100644
index 3ad83c1f9d..0000000000
--- a/docs/docbook/projdoc/UNIX_INSTALL.sgml
+++ /dev/null
@@ -1,176 +0,0 @@
-<chapter id="install">
-<chapterinfo>
- &author.tridge;
- &author.jelmer;
- <author><firstname>Karl</firstname><surname>Auer</surname></author>
- <!-- Isn't some of this written by others as well? -->
-
-</chapterinfo>
-
-<title>How to Install and Test SAMBA</title>
-
-<sect1>
- <title>Obtaining and installing samba</title>
-
- <para>Binary packages of samba are included in almost any Linux or
- Unix distribution. There are also some packages available at
- <ulink url="http://samba.org/">the samba homepage</ulink>.
- </para>
-
- <para>If you need to compile samba from source, check the
- <link linkend="compiling">appropriate appendix chapter</link>.</para>
-</sect1>
-
-<sect1>
- <title>Configuring samba</title>
-
- <para>Samba's configuration is stored in the smb.conf file,
- that usually resides in <filename>/etc/samba/smb.conf</filename>
- or <filename>/usr/local/samba/lib/smb.conf</filename>. You can either
- edit this file yourself or do it using one of the many graphical
- tools that are available, such as the web-based interface swat, that
- is included with samba.</para>
-
-<sect2>
- <title>Editing the <filename>smb.conf</filename> file</title>
-
- <para>There are sample configuration files in the examples
- subdirectory in the distribution. I suggest you read them
- carefully so you can see how the options go together in
- practice. See the man page for all the options.</para>
-
- <para>The simplest useful configuration file would be
- something like this:</para>
-
- <para><programlisting>
-[global]
- workgroup = MYGROUP
-
-[homes]
- guest ok = no
- read only = no
- </programlisting></para>
-
- <para>which would allow connections by anyone with an
- account on the server, using either their login name or
- "<command>homes</command>" as the service name. (Note that I also set the
- workgroup that Samba is part of. See BROWSING.txt for details)</para>
-
- <para>Make sure you put the <filename>smb.conf</filename> file in the same place
- you specified in the<filename>Makefile</filename> (the default is to
- look for it in <filename>/usr/local/samba/lib/</filename>).</para>
-
- <para>For more information about security settings for the
- <command>[homes]</command> share please refer to the chapter
- <link linkend="securing-samba">Securing Samba</link>.</para>
-
-<sect3>
- <title>Test your config file with
- <command>testparm</command></title>
-
- <para>It's important that you test the validity of your
- <filename>smb.conf</filename> file using the <application>testparm</application> program.
- If testparm runs OK then it will list the loaded services. If
- not it will give an error message.</para>
-
- <para>Make sure it runs OK and that the services look
- reasonable before proceeding. </para>
-
- <para>Always run testparm again when you change
- <filename>smb.conf</filename>!</para>
-
-</sect3>
-</sect2>
-
- <sect2>
- <title>SWAT</title>
-
- <para>
- SWAT is a web-based interface that helps you configure samba.
- SWAT might not be available in the samba package on your platform,
- but in a separate package. Please read the swat manpage
- on compiling, installing and configuring swat from source.
- </para>
-
- <para>To launch SWAT just run your favorite web browser and
- point it at "http://localhost:901/". Replace <replaceable>localhost</replaceable> with the name of the computer you are running samba on if you
- are running samba on a different computer than your browser.</para>
-
- <para>Note that you can attach to SWAT from any IP connected
- machine but connecting from a remote machine leaves your
- connection open to password sniffing as passwords will be sent
- in the clear over the wire. </para>
- </sect2>
-</sect1>
-
-<sect1>
- <title>Try listing the shares available on your
- server</title>
-
- <para><prompt>$ </prompt><userinput>smbclient -L
- <replaceable>yourhostname</replaceable></userinput></para>
-
- <para>You should get back a list of shares available on
- your server. If you don't then something is incorrectly setup.
- Note that this method can also be used to see what shares
- are available on other LanManager clients (such as WfWg).</para>
-
- <para>If you choose user level security then you may find
- that Samba requests a password before it will list the shares.
- See the <command>smbclient</command> man page for details. (you
- can force it to list the shares without a password by
- adding the option -U% to the command line. This will not work
- with non-Samba servers)</para>
-</sect1>
-
-<sect1>
- <title>Try connecting with the unix client</title>
-
- <para><prompt>$ </prompt><userinput>smbclient <replaceable>
- //yourhostname/aservice</replaceable></userinput></para>
-
- <para>Typically the <replaceable>yourhostname</replaceable>
- would be the name of the host where you installed &smbd;.
- The <replaceable>aservice</replaceable> is
- any service you have defined in the &smb.conf;
- file. Try your user name if you just have a <command>[homes]</command>
- section
- in &smb.conf;.</para>
-
- <para>For example if your unix host is <replaceable>bambi</replaceable>
- and your login name is <replaceable>fred</replaceable> you would type:</para>
-
- <para><prompt>$ </prompt><userinput>smbclient //<replaceable>bambi</replaceable>/<replaceable>fred</replaceable>
- </userinput></para>
-</sect1>
-
-<sect1>
- <title>Try connecting from a DOS, WfWg, Win9x, WinNT,
- Win2k, OS/2, etc... client</title>
-
- <para>Try mounting disks. eg:</para>
-
- <para><prompt>C:\WINDOWS\> </prompt><userinput>net use d: \\servername\service
- </userinput></para>
-
- <para>Try printing. eg:</para>
-
- <para><prompt>C:\WINDOWS\> </prompt><userinput>net use lpt1:
- \\servername\spoolservice</userinput></para>
-
- <para><prompt>C:\WINDOWS\> </prompt><userinput>print filename
- </userinput></para>
-</sect1>
-
-<sect1>
- <title>What If Things Don't Work?</title>
-
- <para>Then you might read the file chapter
- <link linkend="diagnosis">Diagnosis</link> and the
- FAQ. If you are still stuck then try to follow
- the <link linkend="problems">Analysing and Solving Problems chapter</link>
- Samba has been successfully installed at thousands of sites worldwide,
- so maybe someone else has hit your problem and has overcome it. </para>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/VFS.sgml b/docs/docbook/projdoc/VFS.sgml
deleted file mode 100644
index 225411b427..0000000000
--- a/docs/docbook/projdoc/VFS.sgml
+++ /dev/null
@@ -1,230 +0,0 @@
-<chapter id="VFS">
-<chapterinfo>
- &author.jelmer;
- &author.jht;
- <author><firstname>Alexander</firstname><surname>Bokovoy</surname></author>
- <author><firstname>Tim</firstname><surname>Potter</surname></author>
- <author><firstname>Simo</firstname><surname>Sorce</surname></author>
-</chapterinfo>
-<title>Stackable VFS modules</title>
-
-<sect1>
-<title>Introduction and configuration</title>
-
-<para>
-Since samba 3.0, samba supports stackable VFS(Virtual File System) modules.
-Samba passes each request to access the unix file system thru the loaded VFS modules.
-This chapter covers all the modules that come with the samba source and references to
-some external modules.
-</para>
-
-<para>
-You may have problems to compile these modules, as shared libraries are
-compiled and linked in different ways on different systems.
-They currently have been tested against GNU/linux and IRIX.
-</para>
-
-<para>
-To use the VFS modules, create a share similar to the one below. The
-important parameter is the <command>vfs object</command> parameter which must point to
-the exact pathname of the shared library objects. For example, to log all access
-to files and use a recycle bin:
-
-<programlisting>
- [audit]
- comment = Audited /data directory
- path = /data
- vfs object = /path/to/audit.so /path/to/recycle.so
- writeable = yes
- browseable = yes
-</programlisting>
-</para>
-
-<para>
-The modules are used in the order they are specified.
-</para>
-
-<para>
-Further documentation on writing VFS modules for Samba can be found in
-the Samba Developers Guide.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Included modules</title>
-
-<sect2>
-<title>audit</title>
-<para>A simple module to audit file access to the syslog
-facility. The following operations are logged:
-<simplelist>
-<member>share</member>
-<member>connect/disconnect</member>
-<member>directory opens/create/remove</member>
-<member>file open/close/rename/unlink/chmod</member>
-</simplelist>
-</para>
-</sect2>
-
-<sect2>
-<title>extd_audit</title>
-<para>
-This module is identical with the <emphasis>audit</emphasis> module above except
-that it sends audit logs to both syslog as well as the smbd log file/s. The
-loglevel for this module is set in the smb.conf file.
-</para>
-
-<para>
-The logging information that will be written to the smbd log file is controlled by
-the <emphasis>log level</emphasis> parameter in <filename>smb.conf</filename>. The
-following information will be recorded:
-</para>
-
-<table frame="all"><title>Extended Auditing Log Information</title>
-<tgroup cols="2" align="center">
- <thead>
- <row><entry align="center">Log Level</entry><entry>Log Details - File and Directory Operations</entry></row>
- </thead>
- <tbody>
- <row><entry align="center">0</entry><entry align="left">Creation / Deletion</entry></row>
- <row><entry align="center">1</entry><entry align="left">Create / Delete / Rename / Permission Changes</entry></row>
- <row><entry align="center">2</entry><entry align="left">Create / Delete / Rename / Perm Change / Open / Close</entry></row>
- </tbody>
-</tgroup>
-</table>
-
-</sect2>
-
-<sect2>
-<title>recycle</title>
-<para>
-A recycle-bin like module. When used any unlink call
-will be intercepted and files moved to the recycle
-directory instead of being deleted.
-</para>
-
-<para>Supported options:
-<variablelist>
- <varlistentry>
- <term>vfs_recycle_bin:repository</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:keeptree</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:versions</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:touch</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:maxsize</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:exclude</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:exclude_dir</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>vfs_recycle_bin:noversions</term>
- <listitem><para>FIXME</para></listitem>
- </varlistentry>
-</variablelist>
-</para>
-
-</sect2>
-
-<sect2>
-<title>netatalk</title>
-<para>
-A netatalk module, that will ease co-existence of samba and
-netatalk file sharing services.
-</para>
-
-<para>Advantages compared to the old netatalk module:
-<simplelist>
-<member>it doesn't care about creating of .AppleDouble forks, just keeps them in sync</member>
-<member>if share in smb.conf doesn't contain .AppleDouble item in hide or veto list, it will be added automatically</member>
-</simplelist>
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>VFS modules available elsewhere</title>
-
-<para>
-This section contains a listing of various other VFS modules that
-have been posted but don't currently reside in the Samba CVS
-tree for one reason or another (e.g. it is easy for the maintainer
-to have his or her own CVS tree).
-</para>
-
-<para>
-No statemets about the stability or functionality of any module
-should be implied due to its presence here.
-</para>
-
-<sect2>
-<title>DatabaseFS</title>
-
-<para>
-URL: <ulink url="http://www.css.tayloru.edu/~elorimer/databasefs/index.php">http://www.css.tayloru.edu/~elorimer/databasefs/index.php</ulink>
-</para>
-
-<para>By <ulink url="mailto:elorimer@css.tayloru.edu">Eric Lorimer</ulink>.</para>
-
-<para>
-I have created a VFS module which implements a fairly complete read-only
-filesystem. It presents information from a database as a filesystem in
-a modular and generic way to allow different databases to be used
-(originally designed for organizing MP3s under directories such as
-"Artists," "Song Keywords," etc... I have since applied it to a student
-roster database very easily). The directory structure is stored in the
-database itself and the module makes no assumptions about the database
-structure beyond the table it requires to run.
-</para>
-
-<para>
-Any feedback would be appreciated: comments, suggestions, patches,
-etc... If nothing else, hopefully it might prove useful for someone
-else who wishes to create a virtual filesystem.
-</para>
-
-</sect2>
-
-<sect2>
-<title>vscan</title>
-<para>URL: <ulink url="http://www.openantivirus.org/">http://www.openantivirus.org/</ulink></para>
-
-<para>
-samba-vscan is a proof-of-concept module for Samba, which
-uses the VFS (virtual file system) features of Samba 2.2.x/3.0
-alphaX. Of couse, Samba has to be compiled with VFS support.
-samba-vscan supports various virus scanners and is maintained
-by Rainer Link.
-</para>
-
-</sect2>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/locking.sgml b/docs/docbook/projdoc/locking.sgml
deleted file mode 100644
index facaef551f..0000000000
--- a/docs/docbook/projdoc/locking.sgml
+++ /dev/null
@@ -1,396 +0,0 @@
-<chapter id="locking">
-<chapterinfo>
- &author.jeremy;
- &author.jelmer;
- &author.jht;
-</chapterinfo>
-<title>File and Record Locking</title>
-
-<sect1>
-<title>Discussion</title>
-
-<para>
-One area which sometimes causes trouble is locking.
-</para>
-
-<para>
-There are two types of locking which need to be performed by a SMB server.
-The first is <emphasis>record locking</emphasis> which allows a client to lock
-a range of bytes in a open file. The second is the <emphasis>deny modes</emphasis>
-that are specified when a file is open.
-</para>
-
-<para>
-Record locking semantics under Unix is very different from record locking under
-Windows. Versions of Samba before 2.2 have tried to use the native fcntl() unix
-system call to implement proper record locking between different Samba clients.
-This can not be fully correct due to several reasons. The simplest is the fact
-that a Windows client is allowed to lock a byte range up to 2^32 or 2^64,
-depending on the client OS. The unix locking only supports byte ranges up to 2^31.
-So it is not possible to correctly satisfy a lock request above 2^31. There are
-many more differences, too many to be listed here.
-</para>
-
-<para>
-Samba 2.2 and above implements record locking completely independent of the
-underlying unix system. If a byte range lock that the client requests happens
-to fall into the range 0-2^31, Samba hands this request down to the Unix system.
-All other locks can not be seen by unix anyway.
-</para>
-
-<para>
-Strictly a SMB server should check for locks before every read and write call on
-a file. Unfortunately with the way fcntl() works this can be slow and may overstress
-the rpc.lockd. It is also almost always unnecessary as clients are supposed to
-independently make locking calls before reads and writes anyway if locking is
-important to them. By default Samba only makes locking calls when explicitly asked
-to by a client, but if you set <emphasis>strict locking = yes</emphasis> then it
-will make lock checking calls on every read and write.
-</para>
-
-<para>
-You can also disable by range locking completely using <emphasis>locking = no</emphasis>.
-This is useful for those shares that don't support locking or don't need it
-(such as cdroms). In this case Samba fakes the return codes of locking calls to
-tell clients that everything is OK.
-</para>
-
-<para>
-The second class of locking is the <emphasis>deny modes</emphasis>. These
-are set by an application when it opens a file to determine what types of
-access should be allowed simultaneously with its open. A client may ask for
-DENY_NONE, DENY_READ, DENY_WRITE or DENY_ALL. There are also special compatibility
-modes called DENY_FCB and DENY_DOS.
-</para>
-</sect1>
-
-<sect1>
-<title>Samba Opportunistic Locking Control</title>
-
-<para>
-Opportunistic locking essentially means that the client is allowed to download and cache
-a file on their hard drive while making changes; if a second client wants to access the
-file, the first client receives a break and must synchronise the file back to the server.
-This can give significant performance gains in some cases; some programs insist on
-synchronising the contents of the entire file back to the server for a single change.
-</para>
-
-<para>
-Level1 Oplocks (aka just plain "oplocks") is another term for opportunistic locking.
-</para>
-
-<para>
-Level2 Oplocks provids opportunistic locking for a file that will be treated as
-<emphasis>read only</emphasis>. Typically this is used on files that are read-only or
-on files that the client has no initial intention to write to at time of opening the file.
-</para>
-
-<para>
-Kernel Oplocks are essentially a method that allows the Linux kernel to co-exist with
-Samba's oplocked files, although this has provided better integration of MS Windows network
-file locking with the under lying OS, SGI IRIX and Linux are the only two OS's that are
-oplock aware at this time.
-</para>
-
-<para>
-Unless your system supports kernel oplocks, you should disable oplocks if you are
-accessing the same files from both Unix/Linux and SMB clients. Regardless, oplocks should
-always be disabled if you are sharing a database file (e.g., Microsoft Access) between
-multiple clients, as any break the first client receives will affect synchronisation of
-the entire file (not just the single record), which will result in a noticable performance
-impairment and, more likely, problems accessing the database in the first place. Notably,
-Microsoft Outlook's personal folders (*.pst) react very badly to oplocks. If in doubt,
-disable oplocks and tune your system from that point.
-</para>
-
-<para>
-If client-side caching is desirable and reliable on your network, you will benefit from
-turning on oplocks. If your network is slow and/or unreliable, or you are sharing your
-files among other file sharing mechanisms (e.g., NFS) or across a WAN, or multiple people
-will be accessing the same files frequently, you probably will not benefit from the overhead
-of your client sending oplock breaks and will instead want to disable oplocks for the share.
-</para>
-
-<para>
-Another factor to consider is the perceived performance of file access. If oplocks provide no
-measurable speed benefit on your network, it might not be worth the hassle of dealing with them.
-</para>
-
-<para>
-You can disable oplocks on a per-share basis with the following:
-
-<programlisting>
- oplocks = False
- level2 oplocks = False
-</programlisting>
-
-Alternately, you could disable oplocks on a per-file basis within the share:
-
-<programlisting>
- veto oplock files = /*.mdb/*.MDB/*.dbf/*.DBF/
-</programlisting>
-</para>
-
-<para>
-If you are experiencing problems with oplocks as apparent from Samba's log entries,
-you may want to play it safe and disable oplocks and level2 oplocks.
-</para>
-
-</sect1>
-
-<sect1>
-<title>MS Windows Opportunistic Locking and Caching Controls</title>
-
-<para>
-There is a known issue when running applications (like Norton Anti-Virus) on a Windows 2000/ XP
-workstation computer that can affect any application attempting to access shared database files
-across a network. This is a result of a default setting configured in the Windows 2000/XP
-operating system known as <emphasis>Opportunistic Locking</emphasis>. When a workstation
-attempts to access shared data files located on another Windows 2000/XP computer,
-the Windows 2000/XP operating system will attempt to increase performance by locking the
-files and caching information locally. When this occurs, the application is unable to
-properly function, which results in an <emphasis>Access Denied</emphasis>
- error message being displayed during network operations.
-</para>
-
-<para>
-All Windows operating systems in the NT family that act as database servers for data files
-(meaning that data files are stored there and accessed by other Windows PCs) may need to
-have opportunistic locking disabled in order to minimize the risk of data file corruption.
-This includes Windows 9x/Me, Windows NT, Windows 200x and Windows XP.
-</para>
-
-<para>
-If you are using a Windows NT family workstation in place of a server, you must also
-disable opportunistic locking (oplocks) on that workstation. For example, if you use a
-PC with the Windows NT Workstation operating system instead of Windows NT Server, and you
-have data files located on it that are accessed from other Windows PCs, you may need to
-disable oplocks on that system.
-</para>
-
-<para>
-The major difference is the location in the Windows registry where the values for disabling
-oplocks are entered. Instead of the LanManServer location, the LanManWorkstation location
-may be used.
-</para>
-
-<para>
-You can verify (or change or add, if necessary) this Registry value using the Windows
-Registry Editor. When you change this registry value, you will have to reboot the PC
-to ensure that the new setting goes into effect.
-</para>
-
-<para>
-The location of the client registry entry for opportunistic locking has changed in
-Windows 2000 from the earlier location in Microsoft Windows NT.
-</para>
-
-<note><para>
-Windows 2000 will still respect the EnableOplocks registry value used to disable oplocks
-in earlier versions of Windows.
-</para></note>
-
-<para>
-You can also deny the granting of opportunistic locks by changing the following registry entries:
-</para>
-
-<para>
-<programlisting>
- HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MRXSmb\Parameters\
-
- OplocksDisabled REG_DWORD 0 or 1
- Default: 0 (not disabled)
-</programlisting>
-</para>
-
-<note><para>
-The OplocksDisabled registry value configures Windows clients to either request or not
-request opportunistic locks on a remote file. To disable oplocks, the value of
- OplocksDisabled must be set to 1.
-</para></note>
-
-<para>
-<programlisting>
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
-
- EnableOplocks REG_DWORD 0 or 1
- Default: 1 (Enabled by Default)
-
- EnableOpLockForceClose REG_DWORD 0 or 1
- Default: 0 (Disabled by Default)
-</programlisting>
-</para>
-
-<note><para>
-The EnableOplocks value configures Windows-based servers (including Workstations sharing
-files) to allow or deny opportunistic locks on local files.
-</para></note>
-
-<para>
-To force closure of open oplocks on close or program exit EnableOpLockForceClose must be set to 1.
-</para>
-
-<para>
-An illustration of how level II oplocks work:
-</para>
-
-<itemizedlist>
- <listitem><para>
- Station 1 opens the file, requesting oplock.
- </para></listitem>
- <listitem><para>
- Since no other station has the file open, the server grants station 1 exclusive oplock.
- </para></listitem>
- <listitem><para>
- Station 2 opens the file, requesting oplock.
- </para></listitem>
- <listitem><para>
- Since station 1 has not yet written to the file, the server asks station 1 to Break
- to Level II Oplock.
- </para></listitem>
- <listitem><para>
- Station 1 complies by flushing locally buffered lock information to the server.
- </para></listitem>
- <listitem><para>
- Station 1 informs the server that it has Broken to Level II Oplock (alternatively,
- station 1 could have closed the file).
- </para></listitem>
- <listitem><para>
- The server responds to station 2's open request, granting it level II oplock.
- Other stations can likewise open the file and obtain level II oplock.
- </para></listitem>
- <listitem><para>
- Station 2 (or any station that has the file open) sends a write request SMB.
- The server returns the write response.
- </para></listitem>
- <listitem><para>
- The server asks all stations that have the file open to Break to None, meaning no
- station holds any oplock on the file. Because the workstations can have no cached
- writes or locks at this point, they need not respond to the break-to-none advisory;
- all they need do is invalidate locally cashed read-ahead data.
- </para></listitem>
-</itemizedlist>
-
-<sect2>
-<title>Workstation Service Entries</title>
-
-<para><programlisting>
- \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters
-
- UseOpportunisticLocking REG_DWORD 0 or 1
- Default: 1 (true)
-</programlisting></para>
-
-<para>
-Indicates whether the redirector should use opportunistic-locking (oplock) performance
-enhancement. This parameter should be disabled only to isolate problems.
-</para>
-
-</sect2>
-<sect2>
-<title>Server Service Entries</title>
-
-<para><programlisting>
- \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
-
- EnableOplocks REG_DWORD 0 or 1
- Default: 1 (true)
-</programlisting></para>
-
-<para>
-Specifies whether the server allows clients to use oplocks on files. Oplocks are a
-significant performance enhancement, but have the potential to cause lost cached
-data on some networks, particularly wide-area networks.
-</para>
-
-<para><programlisting>
- MinLinkThroughput REG_DWORD 0 to infinite bytes per second
- Default: 0
-</programlisting></para>
-
-<para>
-Specifies the minimum link throughput allowed by the server before it disables
-raw and opportunistic locks for this connection.
-</para>
-
-<para><programlisting>
- MaxLinkDelay REG_DWORD 0 to 100,000 seconds
- Default: 60
-</programlisting></para>
-
-<para>
-Specifies the maximum time allowed for a link delay. If delays exceed this number,
-the server disables raw I/O and opportunistic locking for this connection.
-</para>
-
-<para><programlisting>
- OplockBreakWait REG_DWORD 10 to 180 seconds
- Default: 35
-</programlisting></para>
-
-<para>
-Specifies the time that the server waits for a client to respond to an oplock break
-request. Smaller values can allow detection of crashed clients more quickly but can
-potentially cause loss of cached data.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>Persistent Data Corruption</title>
-
-<para>
-If you have applied all of the settings discussed in this paper but data corruption problems
-and other symptoms persist, here are some additional things to check out:
-</para>
-
-<para>
-We have credible reports from developers that faulty network hardware, such as a single
-faulty network card, can cause symptoms similar to read caching and data corruption.
-If you see persistent data corruption even after repeated reindexing, you may have to
-rebuild the data files in question. This involves creating a new data file with the
-same definition as the file to be rebuilt and transferring the data from the old file
-to the new one. There are several known methods for doing this that can be found in
-our Knowledge Base.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Additional Reading</title>
-
-<para>
-You may want to check for an updated version of this white paper on our Web site from
-time to time. Many of our white papers are updated as information changes. For those papers,
-the Last Edited date is always at the top of the paper.
-</para>
-
-<para>
-Section of the Microsoft MSDN Library on opportunistic locking:
-</para>
-
-<para>
-Opportunistic Locks, Microsoft Developer Network (MSDN), Windows Development &gt
-Windows Base Services &gt Files and I/O &gt SDK Documentation &gt File Storage &gt File Systems
-&gt About File Systems &gt Opportunistic Locks, Microsoft Corporation.
-<ulink url="http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp">http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp</ulink>
-</para>
-
-<para>
-Microsoft Knowledge Base Article Q224992 "Maintaining Transactional Integrity with OPLOCKS",
-Microsoft Corporation, April 1999, <ulink url="=http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992">http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992</ulink>.
-</para>
-
-<para>
-Microsoft Knowledge Base Article Q296264 "Configuring Opportunistic Locking in Windows 2000",
-Microsoft Corporation, April 2001, <ulink url="http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264">http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264</ulink>.
-</para>
-
-<para>
-Microsoft Knowledge Base Article Q129202 "PC Ext: Explanation of Opportunistic Locking on Windows NT",
- Microsoft Corporation, April 1995, <ulink url="http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202">http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202</ulink>.
-</para>
-
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/msdfs_setup.sgml b/docs/docbook/projdoc/msdfs_setup.sgml
deleted file mode 100644
index a86cd74235..0000000000
--- a/docs/docbook/projdoc/msdfs_setup.sgml
+++ /dev/null
@@ -1,116 +0,0 @@
-<chapter id="msdfs">
-
-<chapterinfo>
- <author>
- <firstname>Shirish</firstname><surname>Kalele</surname>
- <affiliation>
- <orgname>Samba Team &amp; Veritas Software</orgname>
- <address>
- <email>samba@samba.org</email>
- </address>
- </affiliation>
- </author>
-
- <pubdate>12 Jul 2000</pubdate>
-</chapterinfo>
-
-
-<title>Hosting a Microsoft Distributed File System tree on Samba</title>
-
-<sect1>
-
- <title>Instructions</title>
-
- <para>The Distributed File System (or Dfs) provides a means of
- separating the logical view of files and directories that users
- see from the actual physical locations of these resources on the
- network. It allows for higher availability, smoother storage expansion,
- load balancing etc. For more information about Dfs, refer to <ulink
- url="http://www.microsoft.com/NTServer/nts/downloads/winfeatures/NTSDistrFile/AdminGuide.asp">
- Microsoft documentation</ulink>. </para>
-
- <para>This document explains how to host a Dfs tree on a Unix
- machine (for Dfs-aware clients to browse) using Samba.</para>
-
- <para>To enable SMB-based DFS for Samba, configure it with the
- <parameter>--with-msdfs</parameter> option. Once built, a
- Samba server can be made a Dfs server by setting the global
- boolean <ulink url="smb.conf.5.html#HOSTMSDFS"><parameter>
- host msdfs</parameter></ulink> parameter in the <filename>smb.conf
- </filename> file. You designate a share as a Dfs root using the share
- level boolean <ulink url="smb.conf.5.html#MSDFSROOT"><parameter>
- msdfs root</parameter></ulink> parameter. A Dfs root directory on
- Samba hosts Dfs links in the form of symbolic links that point
- to other servers. For example, a symbolic link
- <filename>junction-&gt;msdfs:storage1\share1</filename> in
- the share directory acts as the Dfs junction. When Dfs-aware
- clients attempt to access the junction link, they are redirected
- to the storage location (in this case, \\storage1\share1).</para>
-
- <para>Dfs trees on Samba work with all Dfs-aware clients ranging
- from Windows 95 to 2000.</para>
-
- <para>Here's an example of setting up a Dfs tree on a Samba
- server.</para>
-
- <para><programlisting>
-# The smb.conf file:
-[global]
- netbios name = SAMBA
- host msdfs = yes
-
-[dfs]
- path = /export/dfsroot
- msdfs root = yes
- </programlisting></para>
-
-
- <para>In the /export/dfsroot directory we set up our dfs links to
- other servers on the network.</para>
-
- <para><prompt>root# </prompt><userinput>cd /export/dfsroot</userinput></para>
- <para><prompt>root# </prompt><userinput>chown root /export/dfsroot</userinput></para>
- <para><prompt>root# </prompt><userinput>chmod 755 /export/dfsroot</userinput></para>
- <para><prompt>root# </prompt><userinput>ln -s msdfs:storageA\\shareA linka</userinput></para>
- <para><prompt>root# </prompt><userinput>ln -s msdfs:serverB\\share,serverC\\share linkb</userinput></para>
-
-
- <para>You should set up the permissions and ownership of
- the directory acting as the Dfs root such that only designated
- users can create, delete or modify the msdfs links. Also note
- that symlink names should be all lowercase. This limitation exists
- to have Samba avoid trying all the case combinations to get at
- the link name. Finally set up the symbolic links to point to the
- network shares you want, and start Samba.</para>
-
- <para>Users on Dfs-aware clients can now browse the Dfs tree
- on the Samba server at \\samba\dfs. Accessing
- links linka or linkb (which appear as directories to the client)
- takes users directly to the appropriate shares on the network.</para>
-
- <sect2>
- <title>Notes</title>
-
- <itemizedlist>
- <listitem><para>Windows clients need to be rebooted
- if a previously mounted non-dfs share is made a dfs
- root or vice versa. A better way is to introduce a
- new share and make it the dfs root.</para>
- </listitem>
-
- <listitem><para>Currently there's a restriction that msdfs
- symlink names should all be lowercase.</para>
- </listitem>
-
- <listitem><para>For security purposes, the directory
- acting as the root of the Dfs tree should have ownership
- and permissions set so that only designated users can
- modify the symbolic links in the directory.</para>
- </listitem>
- </itemizedlist>
- </sect2>
-</sect1>
-
-
-
-</chapter>
diff --git a/docs/docbook/projdoc/passdb.sgml b/docs/docbook/projdoc/passdb.sgml
deleted file mode 100644
index 422cf7b7e7..0000000000
--- a/docs/docbook/projdoc/passdb.sgml
+++ /dev/null
@@ -1,972 +0,0 @@
-<chapter id="passdb">
-<chapterinfo>
- &author.jelmer;
- &author.jerry;
- &author.jeremy;
- &author.jht;
- <author>
- <firstname>Olivier (lem)</firstname><surname>Lemaire</surname>
- <affiliation>
- <orgname>IDEALX</orgname>
- <address><email>olem@IDEALX.org</email></address>
- </affiliation>
- </author>
-
- <pubdate>February 2003</pubdate>
-</chapterinfo>
-
-<title>User information database</title>
-
-<sect1>
- <title>Introduction</title>
-
- <para>Old windows clients send plain text passwords over the wire.
- Samba can check these passwords by crypting them and comparing them
- to the hash stored in the unix user database.
- </para>
-
- <para>
- Newer windows clients send encrypted passwords (so-called
- Lanman and NT hashes) over
- the wire, instead of plain text passwords. The newest clients
- will only send encrypted passwords and refuse to send plain text
- passwords, unless their registry is tweaked.
- </para>
-
- <para>These passwords can't be converted to unix style encrypted
- passwords. Because of that you can't use the standard unix
- user database, and you have to store the Lanman and NT hashes
- somewhere else. </para>
-
- <para>Next to a differently encrypted passwords,
- windows also stores certain data for each user
- that is not stored in a unix user database, e.g.
- workstations the user may logon from, the location where his/her
- profile is stored, etc.
- Samba retrieves and stores this information using a "passdb backend".
- Commonly
- available backends are LDAP, plain text file, MySQL and nisplus.
- For more information, see the documentation about the
- <command>passdb backend = </command> parameter.
- </para>
-</sect1>
-
-<sect1>
- <title>Important Notes About Security</title>
-
- <para>The unix and SMB password encryption techniques seem similar
- on the surface. This similarity is, however, only skin deep. The unix
- scheme typically sends clear text passwords over the network when
- logging in. This is bad. The SMB encryption scheme never sends the
- cleartext password over the network but it does store the 16 byte
- hashed values on disk. This is also bad. Why? Because the 16 byte hashed
- values are a "password equivalent". You cannot derive the user's
- password from them, but they could potentially be used in a modified
- client to gain access to a server. This would require considerable
- technical knowledge on behalf of the attacker but is perfectly possible.
- You should thus treat the data stored in whatever
- passdb backend you use (smbpasswd file, ldap, mysql) as though it contained the
- cleartext passwords of all your users. Its contents must be kept
- secret, and the file should be protected accordingly.</para>
-
- <para>Ideally we would like a password scheme which neither requires
- plain text passwords on the net or on disk. Unfortunately this
- is not available as Samba is stuck with being compatible with
- other SMB systems (WinNT, WfWg, Win95 etc). </para>
-
- <warning>
- <para>Note that Windows NT 4.0 Service pack 3 changed the
- default for permissible authentication so that plaintext
- passwords are <emphasis>never</emphasis> sent over the wire.
- The solution to this is either to switch to encrypted passwords
- with Samba or edit the Windows NT registry to re-enable plaintext
- passwords. See the document WinNT.txt for details on how to do
- this.</para>
-
- <para>Other Microsoft operating systems which also exhibit
- this behavior includes</para>
-
- <para> These versions of MS Windows do not support full domain
- security protocols, although they may log onto a domain environment.
- Of these Only MS Windows XP Home does NOT support domain logons.</para>
-
- <simplelist>
- <member>MS DOS Network client 3.0 with
- the basic network redirector installed</member>
-
- <member>Windows 95 with the network redirector
- update installed</member>
-
- <member>Windows 98 [se]</member>
-
- <member>Windows Me</member>
-
- <member>Windows XP Home</member>
- </simplelist>
-
- <para> The following versions of MS Windows fully support domain
- security protocols.</para>
-
- <simplelist>
- <member>Windows NT 3.5x</member>
- <member>Windows NT 4.0</member>
- <member>Windows 2000 Professional</member>
- <member>Windows 200x Server/Advanced Server</member>
- <member>Windows XP Professional</member>
- </simplelist>
- </warning>
-
- <note><para>All current release of
- Microsoft SMB/CIFS clients support authentication via the
- SMB Challenge/Response mechanism described here. Enabling
- clear text authentication does not disable the ability
- of the client to participate in encrypted authentication.</para></note>
-
- <para>MS Windows clients will cache the encrypted password alone.
- Even when plain text passwords are re-enabled, through the appropriate
- registry change, the plain text password is NEVER cached. This means that
- in the event that a network connections should become disconnected (broken)
- only the cached (encrypted) password will be sent to the resource server
- to affect a auto-reconnect. If the resource server does not support encrypted
- passwords the auto-reconnect will fail. <emphasis>USE OF ENCRYPTED PASSWORDS
- IS STRONGLY ADVISED.</emphasis></para>
-
- <sect2>
- <title>Advantages of SMB Encryption</title>
-
- <simplelist>
- <member>Plain text passwords are not passed across
- the network. Someone using a network sniffer cannot just
- record passwords going to the SMB server.</member>
-
- <member>WinNT doesn't like talking to a server
- that does not support encrypted passwords. It will refuse
- to browse the server if the server is also in user level
- security mode. It will insist on prompting the user for the
- password on each connection, which is very annoying. The
- only things you can do to stop this is to use SMB encryption.
- </member>
-
- <member>Encrypted password support allows automatic share
- (resource) reconnects.</member>
- </simplelist>
- </sect2>
-
-
- <sect2>
- <title>Advantages of non-encrypted passwords</title>
-
- <simplelist>
- <member>Plain text passwords are not kept
- on disk, and are NOT cached in memory. </member>
-
- <member>Uses same password file as other unix
- services such as login and ftp</member>
-
- <member>Use of other services (such as telnet and ftp) which
- send plain text passwords over the net, so sending them for SMB
- isn't such a big deal.</member>
- </simplelist>
- </sect2>
-</sect1>
-
-
-<sect1>
- <title>The smbpasswd Command</title>
-
- <para>The smbpasswd utility is a utility similar to the
- <command>passwd</command> or <command>yppasswd</command> programs.
- It maintains the two 32 byte password fields in the passdb backend. </para>
-
- <para><command>smbpasswd</command> works in a client-server mode
- where it contacts the local smbd to change the user's password on its
- behalf. This has enormous benefits - as follows.</para>
-
- <para><command>smbpasswd</command> has the capability
- to change passwords on Windows NT servers (this only works when
- the request is sent to the NT Primary Domain Controller if you
- are changing an NT Domain user's password).</para>
-
- <para>To run smbpasswd as a normal user just type :</para>
-
- <para><prompt>$ </prompt><userinput>smbpasswd</userinput></para>
- <para><prompt>Old SMB password: </prompt><userinput>&lt;type old value here -
- or hit return if there was no old password&gt;</userinput></para>
- <para><prompt>New SMB Password: </prompt><userinput>&lt;type new value&gt;
- </userinput></para>
- <para><prompt>Repeat New SMB Password: </prompt><userinput>&lt;re-type new value
- </userinput></para>
-
- <para>If the old value does not match the current value stored for
- that user, or the two new values do not match each other, then the
- password will not be changed.</para>
-
- <para>If invoked by an ordinary user it will only allow the user
- to change his or her own Samba password.</para>
-
- <para>If run by the root user smbpasswd may take an optional
- argument, specifying the user name whose SMB password you wish to
- change. Note that when run as root smbpasswd does not prompt for
- or check the old password value, thus allowing root to set passwords
- for users who have forgotten their passwords.</para>
-
- <para><command>smbpasswd</command> is designed to work in the same way
- and be familiar to UNIX users who use the <command>passwd</command> or
- <command>yppasswd</command> commands.</para>
-
- <para>For more details on using <command>smbpasswd</command> refer
- to the man page which will always be the definitive reference.</para>
-</sect1>
-
-<!--
-<sect1>
-<title>The <command>pdbedit</command> command</title>
-FIXME
-</sect1>
--->
-
-<sect1>
-<title>Plain text</title>
-<para>
-Older versions of samba retrieved user information from the unix user database
-and eventually some other fields from the file <filename>/etc/samba/smbpasswd</filename>
-or <filename>/etc/smbpasswd</filename>. When password encryption is disabled, no
-data is stored at all.
-</para>
-</sect1>
-
-<sect1>
-<title>TDB</title>
-<para>Samba can also store the user data in a "TDB" (Trivial Database). Using this backend
-doesn't require any additional configuration. This backend is recommended for new installations that
-don not require LDAP.
-</para>
-</sect1>
-
-<sect1>
-<title>LDAP</title>
-
-<sect2>
-<title>Introduction</title>
-
-<para>
-This document describes how to use an LDAP directory for storing Samba user
-account information traditionally stored in the smbpasswd(5) file. It is
-assumed that the reader already has a basic understanding of LDAP concepts
-and has a working directory server already installed. For more information
-on LDAP architectures and Directories, please refer to the following sites.
-</para>
-
-<itemizedlist>
- <listitem><para>OpenLDAP - <ulink url="http://www.openldap.org/">http://www.openldap.org/</ulink></para></listitem>
- <listitem><para>iPlanet Directory Server - <ulink url="http://iplanet.netscape.com/directory">http://iplanet.netscape.com/directory</ulink></para></listitem>
-</itemizedlist>
-
-<para>
-Note that <ulink url="http://www.ora.com/">O'Reilly Publishing</ulink> is working on
-a guide to LDAP for System Administrators which has a planned release date of
-early summer, 2002.
-</para>
-
-<para>
-Two additional Samba resources which may prove to be helpful are
-</para>
-
-<itemizedlist>
- <listitem><para>The <ulink url="http://www.unav.es/cti/ldap-smb/ldap-smb-3-howto.html">Samba-PDC-LDAP-HOWTO</ulink>
- maintained by Ignacio Coupeau.</para></listitem>
-
- <listitem><para>The NT migration scripts from <ulink url="http://samba.idealx.org/">IDEALX</ulink> that are
- geared to manage users and group in such a Samba-LDAP Domain Controller configuration.
- </para></listitem>
-</itemizedlist>
-
-</sect2>
-
-<sect2>
-<title>Encrypted Password Database</title>
-
-<para>
-Traditionally, when configuring <ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">"encrypt
-passwords = yes"</ulink> in Samba's <filename>smb.conf</filename> file, user account
-information such as username, LM/NT password hashes, password change times, and account
-flags have been stored in the <filename>smbpasswd(5)</filename> file. There are several
-disadvantages to this approach for sites with very large numbers of users (counted
-in the thousands).
-</para>
-
-<itemizedlist>
-<listitem><para>
-The first is that all lookups must be performed sequentially. Given that
-there are approximately two lookups per domain logon (one for a normal
-session connection such as when mapping a network drive or printer), this
-is a performance bottleneck for large sites. What is needed is an indexed approach
-such as is used in databases.
-</para></listitem>
-
-<listitem><para>
-The second problem is that administrators who desired to replicate a
-smbpasswd file to more than one Samba server were left to use external
-tools such as <command>rsync(1)</command> and <command>ssh(1)</command>
-and wrote custom, in-house scripts.
-</para></listitem>
-
-<listitem><para>
-And finally, the amount of information which is stored in an
-smbpasswd entry leaves no room for additional attributes such as
-a home directory, password expiration time, or even a Relative
-Identified (RID).
-</para></listitem>
-</itemizedlist>
-
-<para>
-As a result of these defeciencies, a more robust means of storing user attributes
-used by smbd was developed. The API which defines access to user accounts
-is commonly referred to as the samdb interface (previously this was called the passdb
-API, and is still so named in the CVS trees).
-</para>
-
-<para>
-There are a few points to stress about that the ldapsam
-does not provide. The LDAP support referred to in the this documentation does not
-include:
-</para>
-
-<itemizedlist>
- <listitem><para>A means of retrieving user account information from
- an Windows 2000 Active Directory server.</para></listitem>
- <listitem><para>A means of replacing /etc/passwd.</para></listitem>
-</itemizedlist>
-
-<para>
-The second item can be accomplished by using LDAP NSS and PAM modules. LGPL
-versions of these libraries can be obtained from PADL Software
-(<ulink url="http://www.padl.com/">http://www.padl.com/</ulink>). More
-information about the configuration of these packages may be found at "LDAP,
-System Administration; Gerald Carter, O'Reilly; Chapter 6: Replacing NIS".
-</para>
-
-</sect2>
-
-<sect2>
-<title>Supported LDAP Servers</title>
-
-<!-- FIXME: This is outdated for 3.0 -->
-
-<para>
-The LDAP samdb code in 2.2.3 (and later) has been developed and tested
-using the OpenLDAP 2.0 server and client libraries.
-The same code should be able to work with Netscape's Directory Server
-and client SDK. However, due to lack of testing so far, there are bound
-to be compile errors and bugs. These should not be hard to fix.
-If you are so inclined, please be sure to forward all patches to
-<ulink url="mailto:samba-patches@samba.org">samba-patches@samba.org</ulink> and
-<ulink url="mailto:jerry@samba.org">jerry@samba.org</ulink>.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Schema and Relationship to the RFC 2307 posixAccount</title>
-
-
-<para>
-Samba 3.0 includes the necessary schema file for OpenLDAP 2.0 in
-<filename>examples/LDAP/samba.schema</filename>. The sambaAccount objectclass is given here:
-</para>
-
-<para><programlisting>
-objectclass ( 1.3.1.5.1.4.1.7165.2.2.2 NAME 'sambaAccount' SUP top AUXILIARY
- DESC 'Samba Account'
- MUST ( uid $ rid )
- MAY ( cn $ lmPassword $ ntPassword $ pwdLastSet $ logonTime $
- logoffTime $ kickoffTime $ pwdCanChange $ pwdMustChange $ acctFlags $
- displayName $ smbHome $ homeDrive $ scriptPath $ profilePath $
- description $ userWorkstations $ primaryGroupID $ domain ))
-</programlisting></para>
-
-<para>
-The samba.schema file has been formatted for OpenLDAP 2.0. The OID's are
-owned by the Samba Team and as such is legal to be openly published.
-If you translate the schema to be used with Netscape DS, please
-submit the modified schema file as a patch to <ulink
-url="mailto:jerry@samba.org">jerry@samba.org</ulink>
-</para>
-
-<para>
-Just as the smbpasswd file is meant to store information which supplements a
-user's <filename>/etc/passwd</filename> entry, so is the sambaAccount object
-meant to supplement the UNIX user account information. A sambaAccount is a
-<constant>STRUCTURAL</constant> objectclass so it can be stored individually
-in the directory. However, there are several fields (e.g. uid) which overlap
-with the posixAccount objectclass outlined in RFC2307. This is by design.
-</para>
-
-<!--olem: we should perhaps have a note about shadowAccounts too as many
-systems use them, isn'it ? -->
-
-<para>
-In order to store all user account information (UNIX and Samba) in the directory,
-it is necessary to use the sambaAccount and posixAccount objectclasses in
-combination. However, smbd will still obtain the user's UNIX account
-information via the standard C library calls (e.g. getpwnam(), et. al.).
-This means that the Samba server must also have the LDAP NSS library installed
-and functioning correctly. This division of information makes it possible to
-store all Samba account information in LDAP, but still maintain UNIX account
-information in NIS while the network is transitioning to a full LDAP infrastructure.
-</para>
-</sect2>
-
-<sect2>
-<title>Configuring Samba with LDAP</title>
-
-
-<sect3>
-<title>OpenLDAP configuration</title>
-
-<para>
-To include support for the sambaAccount object in an OpenLDAP directory
-server, first copy the samba.schema file to slapd's configuration directory.
-</para>
-
-<para>
-<prompt>root# </prompt><userinput>cp samba.schema /etc/openldap/schema/</userinput>
-</para>
-
-<para>
-Next, include the <filename>samba.schema</filename> file in <filename>slapd.conf</filename>.
-The sambaAccount object contains two attributes which depend upon other schema
-files. The 'uid' attribute is defined in <filename>cosine.schema</filename> and
-the 'displayName' attribute is defined in the <filename>inetorgperson.schema</filename>
-file. Both of these must be included before the <filename>samba.schema</filename> file.
-</para>
-
-<para><programlisting>
-## /etc/openldap/slapd.conf
-
-## schema files (core.schema is required by default)
-include /etc/openldap/schema/core.schema
-
-## needed for sambaAccount
-include /etc/openldap/schema/cosine.schema
-include /etc/openldap/schema/inetorgperson.schema
-include /etc/openldap/schema/samba.schema
-include /etc/openldap/schema/nis.schema
-
-....
-</programlisting></para>
-
-<para>
-It is recommended that you maintain some indices on some of the most usefull attributes,
-like in the following example, to speed up searches made on sambaAccount objectclasses
-(and possibly posixAccount and posixGroup as well).
-</para>
-<para><programlisting>
-# Indices to maintain
-## required by OpenLDAP 2.0
-index objectclass eq
-
-## support pb_getsampwnam()
-index uid pres,eq
-## support pdb_getsambapwrid()
-index rid eq
-
-## uncomment these if you are storing posixAccount and
-## posixGroup entries in the directory as well
-##index uidNumber eq
-##index gidNumber eq
-##index cn eq
-##index memberUid eq
-
-# (both fetched via ldapsearch):
-index primaryGroupID eq
-index displayName pres,eq
-
-</programlisting></para>
-</sect3>
-
-
-<sect3>
-<title>Configuring Samba</title>
-
-<para>
-The following parameters are available in smb.conf only with <parameter>--with-ldapsam</parameter>
-was included when compiling Samba.
-</para>
-
-<itemizedlist>
- <listitem><para><ulink url="smb.conf.5.html#PASSDBBACKEND">passdb backend [ldapsam|ldapsam_nua]:url</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPSSL">ldap ssl</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPADMINDN">ldap admin dn</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPSUFFIX">ldap suffix</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPFILTER">ldap filter</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPPORT">ldap port</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPMACHINSUFFIX">ldap machine suffix</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPUSERSUFFIX">ldap user suffix</ulink></para></listitem>
- <listitem><para><ulink url="smb.conf.5.html#LDAPDELETEDN">ldap delete dn</ulink></para></listitem>
-
-</itemizedlist>
-
-<para>
-These are described in the <ulink url="smb.conf.5.html">smb.conf(5)</ulink> man
-page and so will not be repeated here. However, a sample smb.conf file for
-use with an LDAP directory could appear as
-</para>
-
-<para><programlisting>
-## /usr/local/samba/lib/smb.conf
-[global]
- security = user
- encrypt passwords = yes
-
- netbios name = TASHTEGO
- workgroup = NARNIA
-
- # ldap related parameters
-
- # define the DN to use when binding to the directory servers
- # The password for this DN is not stored in smb.conf. Rather it
- # must be set by using 'smbpasswd -w <replaceable>secretpw</replaceable>' to store the
- # passphrase in the secrets.tdb file. If the "ldap admin dn" values
- # change, this password will need to be reset.
- ldap admin dn = "cn=Samba Manager,ou=people,dc=samba,dc=org"
-
- # Define the SSL option when connecting to the directory
- # ('off', 'start tls', or 'on' (default))
- ldap ssl = start tls
-
- passdb backend ldapsam:ldap://ahab.samba.org
-
- # smbpasswd -x delete the entire dn-entry
- ldap delete dn = no
-
- # the machine and user suffix added to the base suffix
- # wrote WITHOUT quotes. NULL siffixes by default
- ldap user suffix = ou=People
- ldap machine suffix = ou=Systems
-
- # define the port to use in the LDAP session (defaults to 636 when
- # "ldap ssl = on")
- ldap port = 389
-
- # specify the base DN to use when searching the directory
- ldap suffix = "ou=people,dc=samba,dc=org"
-
- # generally the default ldap search filter is ok
- # ldap filter = "(&amp;(uid=%u)(objectclass=sambaAccount))"
-</programlisting></para>
-
-
-</sect3>
-</sect2>
-
-
-<sect2>
-<title>Accounts and Groups management</title>
-
-<para>
-As users accounts are managed thru the sambaAccount objectclass, you should
-modify your existing administration tools to deal with sambaAccount attributes.
-</para>
-
-<para>
-Machines accounts are managed with the sambaAccount objectclass, just
-like users accounts. However, it's up to you to store thoses accounts
-in a different tree of you LDAP namespace: you should use
-"ou=Groups,dc=plainjoe,dc=org" to store groups and
-"ou=People,dc=plainjoe,dc=org" to store users. Just configure your
-NSS and PAM accordingly (usually, in the /etc/ldap.conf configuration
-file).
-</para>
-
-<para>
-In Samba release 3.0, the group management system is based on posix
-groups. This means that Samba makes usage of the posixGroup objectclass.
-For now, there is no NT-like group system management (global and local
-groups).
-</para>
-
-</sect2>
-
-<sect2>
-<title>Security and sambaAccount</title>
-
-
-<para>
-There are two important points to remember when discussing the security
-of sambaAccount entries in the directory.
-</para>
-
-<itemizedlist>
- <listitem><para><emphasis>Never</emphasis> retrieve the lmPassword or
- ntPassword attribute values over an unencrypted LDAP session.</para></listitem>
- <listitem><para><emphasis>Never</emphasis> allow non-admin users to
- view the lmPassword or ntPassword attribute values.</para></listitem>
-</itemizedlist>
-
-<para>
-These password hashes are clear text equivalents and can be used to impersonate
-the user without deriving the original clear text strings. For more information
-on the details of LM/NT password hashes, refer to the <link
-linkend="passdb">User Database</link> of the Samba-HOWTO-Collection.
-</para>
-
-<para>
-To remedy the first security issue, the "ldap ssl" smb.conf parameter defaults
-to require an encrypted session (<command>ldap ssl = on</command>) using
-the default port of 636
-when contacting the directory server. When using an OpenLDAP 2.0 server, it
-is possible to use the use the StartTLS LDAP extended operation in the place of
-LDAPS. In either case, you are strongly discouraged to disable this security
-(<command>ldap ssl = off</command>).
-</para>
-
-<para>
-Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS
-extended operation. However, the OpenLDAP library still provides support for
-the older method of securing communication between clients and servers.
-</para>
-
-<para>
-The second security precaution is to prevent non-administrative users from
-harvesting password hashes from the directory. This can be done using the
-following ACL in <filename>slapd.conf</filename>:
-</para>
-
-<para><programlisting>
-## allow the "ldap admin dn" access, but deny everyone else
-access to attrs=lmPassword,ntPassword
- by dn="cn=Samba Admin,ou=people,dc=plainjoe,dc=org" write
- by * none
-</programlisting></para>
-
-
-</sect2>
-
-
-
-<sect2>
-<title>LDAP specials attributes for sambaAccounts</title>
-
-<para>
-The sambaAccount objectclass is composed of the following attributes:
-</para>
-
-<itemizedlist>
-
- <listitem><para><constant>lmPassword</constant>: the LANMAN password 16-byte hash stored as a character
- representation of a hexidecimal string.</para></listitem>
-
- <listitem><para><constant>ntPassword</constant>: the NT password hash 16-byte stored as a character
- representation of a hexidecimal string.</para></listitem>
-
- <listitem><para><constant>pwdLastSet</constant>: The integer time in seconds since 1970 when the
- <constant>lmPassword</constant> and <constant>ntPassword</constant> attributes were last set.
- </para></listitem>
-
- <listitem><para><constant>acctFlags</constant>: string of 11 characters surrounded by square brackets []
- representing account flags such as U (user), W(workstation), X(no password expiration), and
- D(disabled).</para></listitem>
-
- <listitem><para><constant>logonTime</constant>: Integer value currently unused</para></listitem>
-
- <listitem><para><constant>logoffTime</constant>: Integer value currently unused</para></listitem>
-
- <listitem><para><constant>kickoffTime</constant>: Integer value currently unused</para></listitem>
-
- <listitem><para><constant>pwdCanChange</constant>: Integer value currently unused</para></listitem>
-
- <listitem><para><constant>pwdMustChange</constant>: Integer value currently unused</para></listitem>
-
- <listitem><para><constant>homeDrive</constant>: specifies the drive letter to which to map the
- UNC path specified by homeDirectory. The drive letter must be specified in the form "X:"
- where X is the letter of the drive to map. Refer to the "logon drive" parameter in the
- smb.conf(5) man page for more information.</para></listitem>
-
- <listitem><para><constant>scriptPath</constant>: The scriptPath property specifies the path of
- the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path
- is relative to the netlogon share. Refer to the "logon script" parameter in the
- smb.conf(5) man page for more information.</para></listitem>
-
- <listitem><para><constant>profilePath</constant>: specifies a path to the user's profile.
- This value can be a null string, a local absolute path, or a UNC path. Refer to the
- "logon path" parameter in the smb.conf(5) man page for more information.</para></listitem>
-
- <listitem><para><constant>smbHome</constant>: The homeDirectory property specifies the path of
- the home directory for the user. The string can be null. If homeDrive is set and specifies
- a drive letter, homeDirectory should be a UNC path. The path must be a network
- UNC path of the form \\server\share\directory. This value can be a null string.
- Refer to the "logon home" parameter in the smb.conf(5) man page for more information.
- </para></listitem>
-
- <listitem><para><constant>userWorkstation</constant>: character string value currently unused.
- </para></listitem>
-
- <listitem><para><constant>rid</constant>: the integer representation of the user's relative identifier
- (RID).</para></listitem>
-
- <listitem><para><constant>primaryGroupID</constant>: the relative identifier (RID) of the primary group
- of the user.</para></listitem>
-
-</itemizedlist>
-
-<para>
-The majority of these parameters are only used when Samba is acting as a PDC of
-a domain (refer to the <ulink url="Samba-PDC-HOWTO.html">Samba-PDC-HOWTO</ulink> for details on
-how to configure Samba as a Primary Domain Controller). The following four attributes
-are only stored with the sambaAccount entry if the values are non-default values:
-</para>
-
-<itemizedlist>
- <listitem><para>smbHome</para></listitem>
- <listitem><para>scriptPath</para></listitem>
- <listitem><para>logonPath</para></listitem>
- <listitem><para>homeDrive</para></listitem>
-</itemizedlist>
-
-<para>
-These attributes are only stored with the sambaAccount entry if
-the values are non-default values. For example, assume TASHTEGO has now been
-configured as a PDC and that <command>logon home = \\%L\%u</command> was defined in
-its <filename>smb.conf</filename> file. When a user named "becky" logons to the domain,
-the <parameter>logon home</parameter> string is expanded to \\TASHTEGO\becky.
-If the smbHome attribute exists in the entry "uid=becky,ou=people,dc=samba,dc=org",
-this value is used. However, if this attribute does not exist, then the value
-of the <parameter>logon home</parameter> parameter is used in its place. Samba
-will only write the attribute value to the directory entry if the value is
-something other than the default (e.g. \\MOBY\becky).
-</para>
-
-
-</sect2>
-
-
-
-<sect2>
-<title>Example LDIF Entries for a sambaAccount</title>
-
-
-<para>
-The following is a working LDIF with the inclusion of the posixAccount objectclass:
-</para>
-
-<para><programlisting>
-dn: uid=guest2, ou=people,dc=plainjoe,dc=org
-ntPassword: 878D8014606CDA29677A44EFA1353FC7
-pwdMustChange: 2147483647
-primaryGroupID: 1201
-lmPassword: 552902031BEDE9EFAAD3B435B51404EE
-pwdLastSet: 1010179124
-logonTime: 0
-objectClass: sambaAccount
-uid: guest2
-kickoffTime: 2147483647
-acctFlags: [UX ]
-logoffTime: 2147483647
-rid: 19006
-pwdCanChange: 0
-</programlisting></para>
-
-<para>
-The following is an LDIF entry for using both the sambaAccount and
-posixAccount objectclasses:
-</para>
-
-<para><programlisting>
-dn: uid=gcarter, ou=people,dc=plainjoe,dc=org
-logonTime: 0
-displayName: Gerald Carter
-lmPassword: 552902031BEDE9EFAAD3B435B51404EE
-primaryGroupID: 1201
-objectClass: posixAccount
-objectClass: sambaAccount
-acctFlags: [UX ]
-userPassword: {crypt}BpM2ej8Rkzogo
-uid: gcarter
-uidNumber: 9000
-cn: Gerald Carter
-loginShell: /bin/bash
-logoffTime: 2147483647
-gidNumber: 100
-kickoffTime: 2147483647
-pwdLastSet: 1010179230
-rid: 19000
-homeDirectory: /home/tashtego/gcarter
-pwdCanChange: 0
-pwdMustChange: 2147483647
-ntPassword: 878D8014606CDA29677A44EFA1353FC7
-</programlisting></para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>MySQL</title>
-
-<sect2>
-<title>Creating the database</title>
-
-<para>
-You either can set up your own table and specify the field names to pdb_mysql (see below
-for the column names) or use the default table. The file <filename>examples/pdb/mysql/mysql.dump</filename>
-contains the correct queries to create the required tables. Use the command :
-
-<command>mysql -u<replaceable>username</replaceable> -h<replaceable>hostname</replaceable> -p<replaceable>password</replaceable> <replaceable>databasename</replaceable> < <filename>/path/to/samba/examples/pdb/mysql/mysql.dump</filename></command>
-
-</para>
-</sect2>
-
-<sect2>
-<title>Configuring</title>
-
-<para>This plugin lacks some good documentation, but here is some short info:</para>
-
-<para>Add a the following to the <command>passdb backend</command> variable in your <filename>smb.conf</filename>:
-<programlisting>
-passdb backend = [other-plugins] mysql:identifier [other-plugins]
-</programlisting>
-</para>
-
-<para>The identifier can be any string you like, as long as it doesn't collide with
-the identifiers of other plugins or other instances of pdb_mysql. If you
-specify multiple pdb_mysql.so entries in 'passdb backend', you also need to
-use different identifiers!
-</para>
-
-<para>
-Additional options can be given thru the smb.conf file in the [global] section.
-</para>
-
-<para><programlisting>
-identifier:mysql host - host name, defaults to 'localhost'
-identifier:mysql password
-identifier:mysql user - defaults to 'samba'
-identifier:mysql database - defaults to 'samba'
-identifier:mysql port - defaults to 3306
-identifier:table - Name of the table containing users
-</programlisting></para>
-
-<warning>
-<para>
-Since the password for the mysql user is stored in the
-smb.conf file, you should make the the smb.conf file
-readable only to the user that runs samba. This is considered a security
-bug and will be fixed soon.
-</para>
-</warning>
-
-<para>Names of the columns in this table(I've added column types those columns should have first):</para>
-
-<para><programlisting>
-identifier:logon time column - int(9)
-identifier:logoff time column - int(9)
-identifier:kickoff time column - int(9)
-identifier:pass last set time column - int(9)
-identifier:pass can change time column - int(9)
-identifier:pass must change time column - int(9)
-identifier:username column - varchar(255) - unix username
-identifier:domain column - varchar(255) - NT domain user is part of
-identifier:nt username column - varchar(255) - NT username
-identifier:fullname column - varchar(255) - Full name of user
-identifier:home dir column - varchar(255) - Unix homedir path
-identifier:dir drive column - varchar(2) - Directory drive path (eg: 'H:')
-identifier:logon script column - varchar(255)
- - Batch file to run on client side when logging on
-identifier:profile path column - varchar(255) - Path of profile
-identifier:acct desc column - varchar(255) - Some ASCII NT user data
-identifier:workstations column - varchar(255)
- - Workstations user can logon to (or NULL for all)
-identifier:unknown string column - varchar(255) - unknown string
-identifier:munged dial column - varchar(255) - ?
-identifier:uid column - int(9) - Unix user ID (uid)
-identifier:gid column - int(9) - Unix user group (gid)
-identifier:user sid column - varchar(255) - NT user SID
-identifier:group sid column - varchar(255) - NT group ID
-identifier:lanman pass column - varchar(255) - encrypted lanman password
-identifier:nt pass column - varchar(255) - encrypted nt passwd
-identifier:plain pass column - varchar(255) - plaintext password
-identifier:acct control column - int(9) - nt user data
-identifier:unknown 3 column - int(9) - unknown
-identifier:logon divs column - int(9) - ?
-identifier:hours len column - int(9) - ?
-identifier:unknown 5 column - int(9) - unknown
-identifier:unknown 6 column - int(9) - unknown
-</programlisting></para>
-
-<para>
-Eventually, you can put a colon (:) after the name of each column, which
-should specify the column to update when updating the table. You can also
-specify nothing behind the colon - then the data from the field will not be
-updated.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Using plaintext passwords or encrypted password</title>
-
-<para>
-I strongly discourage the use of plaintext passwords, however, you can use them:
-</para>
-
-<para>
-If you would like to use plaintext passwords, set
-'identifier:lanman pass column' and 'identifier:nt pass column' to
-'NULL' (without the quotes) and 'identifier:plain pass column' to the
-name of the column containing the plaintext passwords.
-</para>
-
-<para>
-If you use encrypted passwords, set the 'identifier:plain pass
-column' to 'NULL' (without the quotes). This is the default.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Getting non-column data from the table</title>
-
-<para>
-It is possible to have not all data in the database and making some 'constant'.
-</para>
-
-<para>
-For example, you can set 'identifier:fullname column' to :
-<command>CONCAT(First_name,' ',Sur_name)</command>
-</para>
-
-<para>
-Or, set 'identifier:workstations column' to :
-<command>NULL</command></para>
-
-<para>See the MySQL documentation for more language constructs.</para>
-
-</sect2>
-</sect1>
-
-<sect1>
-<title>XML</title>
-
-<para>This module requires libxml2 to be installed.</para>
-
-<para>The usage of pdb_xml is pretty straightforward. To export data, use:
-</para>
-
-<para>
- <userinput>pdbedit -e xml:filename</userinput>
-</para>
-
-<para>
-(where filename is the name of the file to put the data in)
-</para>
-
-<para>
-To import data, use:
-<userinput>pdbedit -i xml:filename -e current-pdb</userinput>
-</para>
-<para>
-Where filename is the name to read the data from and current-pdb to put it in.
-</para>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/printer_driver2.sgml b/docs/docbook/projdoc/printer_driver2.sgml
deleted file mode 100644
index da3eb838f2..0000000000
--- a/docs/docbook/projdoc/printer_driver2.sgml
+++ /dev/null
@@ -1,1038 +0,0 @@
-<chapter id="printing">
-
-<chapterinfo>
- &author.jerry;
- <author>
- <firstname>Patrick</firstname><surname>Powell</surname>
- <affiliation>
- <address><email>papowell@lprng.org</email></address>
- </affiliation>
- </author>
- <pubdate> (3 May 2001) </pubdate>
-</chapterinfo>
-
-<title>Printing Support</title>
-
-<sect1>
-<title>Introduction</title>
-
-<para>Beginning with the 2.2.0 release, Samba supports
-the native Windows NT printing mechanisms implemented via
-MS-RPC (i.e. the SPOOLSS named pipe). Previous versions of
-Samba only supported LanMan printing calls.</para>
-
-<para>The additional functionality provided by the new
-SPOOLSS support includes:</para>
-
-<itemizedlist>
- <listitem><para>Support for downloading printer driver
- files to Windows 95/98/NT/2000 clients upon demand.
- </para></listitem>
-
- <listitem><para>Uploading of printer drivers via the
- Windows NT Add Printer Wizard (APW) or the
- Imprints tool set (refer to <ulink
- url="http://imprints.sourceforge.net">http://imprints.sourceforge.net</ulink>).
- </para></listitem>
-
- <listitem><para>Support for the native MS-RPC printing
- calls such as StartDocPrinter, EnumJobs(), etc... (See
- the MSDN documentation at <ulink
- url="http://msdn.microsoft.com/">http://msdn.microsoft.com/</ulink>
- for more information on the Win32 printing API)
- </para></listitem>
-
- <listitem><para>Support for NT Access Control Lists (ACL)
- on printer objects</para></listitem>
-
- <listitem><para>Improved support for printer queue manipulation
- through the use of an internal databases for spooled job
- information</para></listitem>
-</itemizedlist>
-
-<para>
-There has been some initial confusion about what all this means
-and whether or not it is a requirement for printer drivers to be
-installed on a Samba host in order to support printing from Windows
-clients. As a side note, Samba does not use these drivers in any way to process
-spooled files. They are utilized entirely by the clients.
-</para>
-
-<para>
-The following MS KB article, may be of some help if you are dealing with
-Windows 2000 clients: <emphasis>How to Add Printers with No User
-Interaction in Windows 2000</emphasis>
-</para>
-
-<para>
-<ulink url="http://support.microsoft.com/support/kb/articles/Q189/1/05.ASP">http://support.microsoft.com/support/kb/articles/Q189/1/05.ASP</ulink>
-</para>
-
-</sect1>
-
-
-<sect1>
-<title>Configuration</title>
-
-<warning>
-<title>[print$] vs. [printer$]</title>
-
-<para>
-Previous versions of Samba recommended using a share named [printer$].
-This name was taken from the printer$ service created by Windows 9x
-clients when a printer was shared. Windows 9x printer servers always have
-a printer$ service which provides read-only access via no
-password in order to support printer driver downloads.
-</para>
-
-<para>
-However, the initial implementation allowed for a
-parameter named <parameter>printer driver location</parameter>
-to be used on a per share basis to specify the location of
-the driver files associated with that printer. Another
-parameter named <parameter>printer driver</parameter> provided
-a means of defining the printer driver name to be sent to
-the client.
-</para>
-
-</warning>
-
-<sect2>
-<title>Creating [print$]</title>
-
-<para>
-In order to support the uploading of printer driver
-files, you must first configure a file share named [print$].
-The name of this share is hard coded in Samba's internals so
-the name is very important (print$ is the service used by
-Windows NT print servers to provide support for printer driver
-download).
-</para>
-
-<para>You should modify the server's smb.conf file to add the global
-parameters and to create the
-following file share (of course, some of the parameter values,
-such as 'path' are arbitrary and should be replaced with
-appropriate values for your site):</para>
-
-<para><programlisting>
-[global]
- ; members of the ntadmin group should be able
- ; to add drivers and set printer properties
- ; root is implicitly a 'printer admin'
- printer admin = @ntadmin
-
-[print$]
- path = /usr/local/samba/printers
- guest ok = yes
- browseable = yes
- read only = yes
- ; since this share is configured as read only, then we need
- ; a 'write list'. Check the file system permissions to make
- ; sure this account can copy files to the share. If this
- ; is setup to a non-root account, then it should also exist
- ; as a 'printer admin'
- write list = @ntadmin,root
-</programlisting></para>
-
-<para>The <ulink url="smb.conf.5.html#WRITELIST"><parameter>
-write list</parameter></ulink> is used to allow administrative
-level user accounts to have write access in order to update files
-on the share. See the <ulink url="smb.conf.5.html">smb.conf(5)
-man page</ulink> for more information on configuring file shares.</para>
-
-<para>The requirement for <ulink url="smb.conf.5.html#GUESTOK"><command>guest
-ok = yes</command></ulink> depends upon how your
-site is configured. If users will be guaranteed to have
-an account on the Samba host, then this is a non-issue.</para>
-
-<note>
-<title>Author's Note</title>
-
-<para>
-The non-issue is that if all your Windows NT users are guaranteed to be
-authenticated by the Samba server (such as a domain member server and the NT
-user has already been validated by the Domain Controller in
-order to logon to the Windows NT console), then guest access
-is not necessary. Of course, in a workgroup environment where
-you just want to be able to print without worrying about
-silly accounts and security, then configure the share for
-guest access. You'll probably want to add <ulink
-url="smb.conf.5.html#MAPTOGUEST"><command>map to guest = Bad User
-</command></ulink> in the [global] section as well. Make sure
-you understand what this parameter does before using it
-though. --jerry
-</para>
-</note>
-
-<para>In order for a Windows NT print server to support
-the downloading of driver files by multiple client architectures,
-it must create subdirectories within the [print$] service
-which correspond to each of the supported client architectures.
-Samba follows this model as well.</para>
-
-<para>Next create the directory tree below the [print$] share
-for each architecture you wish to support.</para>
-
-<para><computeroutput>
-[print$]-----
- |-W32X86 ; "Windows NT x86"
- |-WIN40 ; "Windows 95/98"
- |-W32ALPHA ; "Windows NT Alpha_AXP"
- |-W32MIPS ; "Windows NT R4000"
- |-W32PPC ; "Windows NT PowerPC"
-</computeroutput></para>
-
-<warning>
-<title>ATTENTION! REQUIRED PERMISSIONS</title>
-
-<para>
-In order to currently add a new driver to you Samba host,
-one of two conditions must hold true:
-</para>
-
-<itemizedlist>
- <listitem><para>The account used to connect to the Samba host
- must have a uid of 0 (i.e. a root account)</para></listitem>
-
- <listitem><para>The account used to connect to the Samba host
- must be a member of the <ulink
- url="smb.conf.5.html#PRINTERADMIN"><parameter>printer
- admin</parameter></ulink> list.</para></listitem>
-</itemizedlist>
-
-<para>
-Of course, the connected account must still possess access
-to add files to the subdirectories beneath [print$]. Remember
-that all file shares are set to 'read only' by default.
-</para>
-</warning>
-
-
-<para>
-Once you have created the required [print$] service and
-associated subdirectories, simply log onto the Samba server using
-a root (or <parameter>printer admin</parameter>) account
-from a Windows NT 4.0/2k client. Open "Network Neighbourhood" or
-"My Network Places" and browse for the Samba host. Once you have located
-the server, navigate to the "Printers..." folder.
-You should see an initial listing of printers
-that matches the printer shares defined on your Samba host.
-</para>
-</sect2>
-
-<sect2>
-<title>Setting Drivers for Existing Printers</title>
-
-<para>The initial listing of printers in the Samba host's
-Printers folder will have no real printer driver assigned
-to them. This defaults to a NULL string to allow the use
-of the local Add Printer Wizard on NT/2000 clients.
-Attempting to view the printer properties for a printer
-which has this default driver assigned will result in
-the error message:</para>
-
-<para>
-<emphasis>Device settings cannot be displayed. The driver
-for the specified printer is not installed, only spooler
-properties will be displayed. Do you want to install the
-driver now?</emphasis>
-</para>
-
-<para>
-Click "No" in the error dialog and you will be presented with
-the printer properties window. The way to assign a driver to a
-printer is to either
-</para>
-
-<itemizedlist>
- <listitem><para>Use the "New Driver..." button to install
- a new printer driver, or</para></listitem>
-
- <listitem><para>Select a driver from the popup list of
- installed drivers. Initially this list will be empty.</para>
- </listitem>
-</itemizedlist>
-
-<para>If you wish to install printer drivers for client
-operating systems other than "Windows NT x86", you will need
-to use the "Sharing" tab of the printer properties dialog.</para>
-
-<para>Assuming you have connected with a root account, you
-will also be able modify other printer properties such as
-ACLs and device settings using this dialog box.</para>
-
-<para>A few closing comments for this section, it is possible
-on a Windows NT print server to have printers
-listed in the Printers folder which are not shared. Samba does
-not make this distinction. By definition, the only printers of
-which Samba is aware are those which are specified as shares in
-<filename>smb.conf</filename>.</para>
-
-<para>Another interesting side note is that Windows NT clients do
-not use the SMB printer share, but rather can print directly
-to any printer on another Windows NT host using MS-RPC. This
-of course assumes that the printing client has the necessary
-privileges on the remote host serving the printer. The default
-permissions assigned by Windows NT to a printer gives the "Print"
-permissions to the "Everyone" well-known group.
-</para>
-
-</sect2>
-
-
-<sect2>
-<title>Support a large number of printers</title>
-
-<para>One issue that has arisen during the development
-phase of Samba 2.2 is the need to support driver downloads for
-100's of printers. Using the Windows NT APW is somewhat
-awkward to say the list. If more than one printer are using the
-same driver, the <ulink url="rpcclient.1.html"><command>rpcclient's
-setdriver command</command></ulink> can be used to set the driver
-associated with an installed driver. The following is example
-of how this could be accomplished:</para>
-
-<para>
-<prompt>$ </prompt><userinput>rpcclient pogo -U root%secret -c "enumdrivers"</userinput>
-<programlisting>
-Domain=[NARNIA] OS=[Unix] Server=[Samba 2.2.0-alpha3]
-
-[Windows NT x86]
-Printer Driver Info 1:
- Driver Name: [HP LaserJet 4000 Series PS]
-
-Printer Driver Info 1:
- Driver Name: [HP LaserJet 2100 Series PS]
-
-Printer Driver Info 1:
- Driver Name: [HP LaserJet 4Si/4SiMX PS]
-</programlisting>
-<prompt>$ </prompt><userinput>rpcclient pogo -U root%secret -c "enumprinters"</userinput>
-<programlisting>
-Domain=[NARNIA] OS=[Unix] Server=[Samba 2.2.0-alpha3]
- flags:[0x800000]
- name:[\\POGO\hp-print]
- description:[POGO\\POGO\hp-print,NO DRIVER AVAILABLE FOR THIS PRINTER,]
- comment:[]
-
-</programlisting>
-<prompt>$ </prompt><userinput>rpcclient pogo -U root%secret -c "setdriver hp-print \"HP LaserJet 4000 Series PS\""</userinput>
-<programlisting>
-Domain=[NARNIA] OS=[Unix] Server=[Samba 2.2.0-alpha3]
-Successfully set hp-print to driver HP LaserJet 4000 Series PS.
-</programlisting></para>
-</sect2>
-
-
-
-<sect2>
-<title>Adding New Printers via the Windows NT APW</title>
-
-<para>
-By default, Samba offers all printer shares defined in <filename>smb.conf</filename>
-in the "Printers..." folder. Also existing in this folder is the Windows NT
-Add Printer Wizard icon. The APW will be show only if
-</para>
-
-<itemizedlist>
- <listitem><para>The connected user is able to successfully
- execute an OpenPrinterEx(\\server) with administrative
- privileges (i.e. root or <parameter>printer admin</parameter>).
- </para></listitem>
-
- <listitem><para><ulink url="smb.conf.5.html#SHOWADDPRINTERWIZARD"><parameter>show
- add printer wizard = yes</parameter></ulink> (the default).
- </para></listitem>
-</itemizedlist>
-
-<para>
-In order to be able to use the APW to successfully add a printer to a Samba
-server, the <ulink url="smb.conf.5.html#ADDPRINTERCOMMAND"><parameter>add
-printer command</parameter></ulink> must have a defined value. The program
-hook must successfully add the printer to the system (i.e.
-<filename>/etc/printcap</filename> or appropriate files) and
-<filename>smb.conf</filename> if necessary.
-</para>
-
-<para>
-When using the APW from a client, if the named printer share does
-not exist, <command>smbd</command> will execute the <parameter>add printer
-command</parameter> and reparse to the <filename>smb.conf</filename>
-to attempt to locate the new printer share. If the share is still not defined,
-an error of "Access Denied" is returned to the client. Note that the
-<parameter>add printer program</parameter> is executed under the context
-of the connected user, not necessarily a root account.
-</para>
-
-<para>
-There is a complementary <ulink url="smb.conf.5.html#DELETEPRINTERCOMMAND"><parameter>delete
-printer command</parameter></ulink> for removing entries from the "Printers..."
-folder.
-</para>
-
-<para>
-The following is an example <ulink url="smb.conf.5.html#ADDPRINTERCOMMAN"><parameter>add printer command</parameter></ulink> script. It adds the appropriate entries to <filename>/etc/printcap.local</filename> (change that to what you need) and returns a line of 'Done' which is needed for the whole process to work.
-</para>
-
-<programlisting>
-#!/bin/sh
-
-# Script to insert a new printer entry into printcap.local
-#
-# $1, printer name, used as the descriptive name
-# $2, share name, used as the printer name for Linux
-# $3, port name
-# $4, driver name
-# $5, location, used for the device file of the printer
-# $6, win9x location
-
-#
-# Make sure we use the location that RedHat uses for local printer defs
-PRINTCAP=/etc/printcap.local
-DATE=`date +%Y%m%d-%H%M%S`
-LP=lp
-RESTART="service lpd restart"
-
-# Keep a copy
-cp $PRINTCAP $PRINTCAP.$DATE
-# Add the printer to $PRINTCAP
-echo "" >> $PRINTCAP
-echo "$2|$1:\\" >> $PRINTCAP
-echo " :sd=/var/spool/lpd/$2:\\" >> $PRINTCAP
-echo " :mx=0:ml=0:sh:\\" >> $PRINTCAP
-echo " :lp=/usr/local/samba/var/print/$5.prn:" >> $PRINTCAP
-
-touch "/usr/local/samba/var/print/$5.prn" >> /tmp/printadd.$$ 2>&amp;1
-chown $LP "/usr/local/samba/var/print/$5.prn" >> /tmp/printadd.$$ 2>&amp;1
-
-mkdir /var/spool/lpd/$2
-chmod 700 /var/spool/lpd/$2
-chown $LP /var/spool/lpd/$2
-#echo $1 >> "/usr/local/samba/var/print/$5.prn"
-#echo $2 >> "/usr/local/samba/var/print/$5.prn"
-#echo $3 >> "/usr/local/samba/var/print/$5.prn"
-#echo $4 >> "/usr/local/samba/var/print/$5.prn"
-#echo $5 >> "/usr/local/samba/var/print/$5.prn"
-#echo $6 >> "/usr/local/samba/var/print/$5.prn"
-$RESTART >> "/usr/local/samba/var/print/$5.prn"
-# Not sure if this is needed
-touch /usr/local/samba/lib/smb.conf
-#
-# You need to return a value, but I am not sure what it means.
-#
-echo "Done"
-exit 0
-</programlisting>
-
-</sect2>
-
-
-<sect2>
-<title>Samba and Printer Ports</title>
-
-<para>
-Windows NT/2000 print servers associate a port with each printer. These normally
-take the form of LPT1:, COM1:, FILE:, etc... Samba must also support the
-concept of ports associated with a printer. By default, only one printer port,
-named "Samba Printer Port", exists on a system. Samba does not really a port in
-order to print, rather it is a requirement of Windows clients.
-</para>
-
-<para>
-Note that Samba does not support the concept of "Printer Pooling" internally
-either. This is when a logical printer is assigned to multiple ports as
-a form of load balancing or fail over.
-</para>
-
-<para>
-If you require that multiple ports be defined for some reason,
-<filename>smb.conf</filename> possesses a <ulink
-url="smb.conf.5.html#ENUMPORTSCOMMAND"><parameter>enumports
-command</parameter></ulink> which can be used to define an external program
-that generates a listing of ports on a system.
-</para>
-
-</sect2>
-
-</sect1>
-
-
-<sect1>
- <title>The Imprints Toolset</title>
-
- <para>The Imprints tool set provides a UNIX equivalent of the
- Windows NT Add Printer Wizard. For complete information, please
- refer to the Imprints web site at <ulink url="http://imprints.sourceforge.net/">
- http://imprints.sourceforge.net/</ulink> as well as the documentation
- included with the imprints source distribution. This section will
- only provide a brief introduction to the features of Imprints.</para>
-
-
- <sect2>
- <title>What is Imprints?</title>
-
- <para>Imprints is a collection of tools for supporting the goals
- of</para>
-
- <itemizedlist>
- <listitem><para>Providing a central repository information
- regarding Windows NT and 95/98 printer driver packages</para>
- </listitem>
-
- <listitem><para>Providing the tools necessary for creating
- the Imprints printer driver packages.</para></listitem>
-
- <listitem><para>Providing an installation client which
- will obtain and install printer drivers on remote Samba
- and Windows NT 4 print servers.</para></listitem>
- </itemizedlist>
-
- </sect2>
-
-
- <sect2>
- <title>Creating Printer Driver Packages</title>
-
- <para>The process of creating printer driver packages is beyond
- the scope of this document (refer to Imprints.txt also included
- with the Samba distribution for more information). In short,
- an Imprints driver package is a gzipped tarball containing the
- driver files, related INF files, and a control file needed by the
- installation client.</para>
- </sect2>
-
-
- <sect2>
- <title>The Imprints server</title>
-
- <para>The Imprints server is really a database server that
- may be queried via standard HTTP mechanisms. Each printer
- entry in the database has an associated URL for the actual
- downloading of the package. Each package is digitally signed
- via GnuPG which can be used to verify that package downloaded
- is actually the one referred in the Imprints database. It is
- <emphasis>not</emphasis> recommended that this security check
- be disabled.</para>
- </sect2>
-
- <sect2>
- <title>The Installation Client</title>
-
- <para>More information regarding the Imprints installation client
- is available in the <filename>Imprints-Client-HOWTO.ps</filename>
- file included with the imprints source package.</para>
-
- <para>The Imprints installation client comes in two forms.</para>
-
- <itemizedlist>
- <listitem><para>a set of command line Perl scripts</para>
- </listitem>
-
- <listitem><para>a GTK+ based graphical interface to
- the command line perl scripts</para></listitem>
- </itemizedlist>
-
- <para>The installation client (in both forms) provides a means
- of querying the Imprints database server for a matching
- list of known printer model names as well as a means to
- download and install the drivers on remote Samba and Windows
- NT print servers.</para>
-
- <para>The basic installation process is in four steps and
- perl code is wrapped around <command>smbclient</command>
- and <command>rpcclient</command>.</para>
-
-<para><programlisting>
-foreach (supported architecture for a given driver)
-{
- 1. rpcclient: Get the appropriate upload directory
- on the remote server
- 2. smbclient: Upload the driver files
- 3. rpcclient: Issues an AddPrinterDriver() MS-RPC
-}
-
-4. rpcclient: Issue an AddPrinterEx() MS-RPC to actually
- create the printer
-</programlisting></para>
-
- <para>One of the problems encountered when implementing
- the Imprints tool set was the name space issues between
- various supported client architectures. For example, Windows
- NT includes a driver named "Apple LaserWriter II NTX v51.8"
- and Windows 95 calls its version of this driver "Apple
- LaserWriter II NTX"</para>
-
- <para>The problem is how to know what client drivers have
- been uploaded for a printer. As astute reader will remember
- that the Windows NT Printer Properties dialog only includes
- space for one printer driver name. A quick look in the
- Windows NT 4.0 system registry at</para>
-
- <para><filename>HKLM\System\CurrentControlSet\Control\Print\Environment
- </filename></para>
-
- <para>will reveal that Windows NT always uses the NT driver
- name. This is ok as Windows NT always requires that at least
- the Windows NT version of the printer driver is present.
- However, Samba does not have the requirement internally.
- Therefore, how can you use the NT driver name if is has not
- already been installed?</para>
-
- <para>The way of sidestepping this limitation is to require
- that all Imprints printer driver packages include both the Intel
- Windows NT and 95/98 printer drivers and that NT driver is
- installed first.</para>
- </sect2>
-
-</sect1>
-
-<!--
-
- This comment from rpc_server/srv_spoolss_nt.c:_spoolss_open_printer_ex()
- needs to be added into a section probably. This is to remind me it needs
- to be done. -jerry
-
- /*
- * If the openprinterex rpc call contains a devmode,
- * it's a per-user one. This per-user devmode is derivated
- * from the global devmode. Openprinterex() contains a per-user
- * devmode for when you do EMF printing and spooling.
- * In the EMF case, the NT workstation is only doing half the job
- * of rendering the page. The other half is done by running the printer
- * driver on the server.
- * The EMF file doesn't contain the page description (paper size, orientation, ...).
- * The EMF file only contains what is to be printed on the page.
- * So in order for the server to know how to print, the NT client sends
- * a devicemode attached to the openprinterex call.
- * But this devicemode is short lived, it's only valid for the current print job.
- *
- * If Samba would have supported EMF spooling, this devicemode would
- * have been attached to the handle, to sent it to the driver to correctly
- * rasterize the EMF file.
- *
- * As Samba only supports RAW spooling, we only receive a ready-to-print file,
- * we just act as a pass-thru between windows and the printer.
- *
- * In order to know that Samba supports only RAW spooling, NT has to call
- * getprinter() at level 2 (attribute field) or NT has to call startdoc()
- * and until NT sends a RAW job, we refuse it.
- *
- * But to call getprinter() or startdoc(), you first need a valid handle,
- * and to get an handle you have to call openprintex(). Hence why you have
- * a devicemode in the openprinterex() call.
- *
- *
- * Differences between NT4 and NT 2000.
- * NT4:
- *
- * On NT4, you only have a global devicemode. This global devicemode can be changed
- * by the administrator (or by a user with enough privs). Every time a user
- * wants to print, the devicemode is reset to the default. In Word, every time
- * you print, the printer's characteristics are always reset to the global devicemode.
- *
- * NT 2000:
- *
- * In W2K, there is the notion of per-user devicemode. The first time you use
- * a printer, a per-user devicemode is build from the global devicemode.
- * If you change your per-user devicemode, it is saved in the registry, under the
- * H_KEY_CURRENT_KEY sub_tree. So that every time you print, you have your default
- * printer preferences available.
- *
- * To change the per-user devicemode: it's the "Printing Preferences ..." button
- * on the General Tab of the printer properties windows.
- *
- * To change the global devicemode: it's the "Printing Defaults..." button
- * on the Advanced Tab of the printer properties window.
--->
-
-<sect1>
-<title>Diagnosis</title>
-
-<sect2>
-<title>Introduction</title>
-
-<para>
-This is a short description of how to debug printing problems with
-Samba. This describes how to debug problems with printing from a SMB
-client to a Samba server, not the other way around. For the reverse
-see the examples/printing directory.
-</para>
-
-<para>
-Ok, so you want to print to a Samba server from your PC. The first
-thing you need to understand is that Samba does not actually do any
-printing itself, it just acts as a middleman between your PC client
-and your Unix printing subsystem. Samba receives the file from the PC
-then passes the file to a external "print command". What print command
-you use is up to you.
-</para>
-
-<para>
-The whole things is controlled using options in smb.conf. The most
-relevant options (which you should look up in the smb.conf man page)
-are:
-</para>
-
-<para><programlisting>
- [global]
- print command - send a file to a spooler
- lpq command - get spool queue status
- lprm command - remove a job
- [printers]
- path = /var/spool/lpd/samba
-</programlisting></para>
-
-<para>
-The following are nice to know about:
-</para>
-
-<para><programlisting>
- queuepause command - stop a printer or print queue
- queueresume command - start a printer or print queue
-</programlisting></para>
-
-<para>
-Example:
-</para>
-
-<para><programlisting>
- print command = /usr/bin/lpr -r -P%p %s
- lpq command = /usr/bin/lpq -P%p %s
- lprm command = /usr/bin/lprm -P%p %j
- queuepause command = /usr/sbin/lpc -P%p stop
- queuepause command = /usr/sbin/lpc -P%p start
-</programlisting></para>
-
-<para>
-Samba should set reasonable defaults for these depending on your
-system type, but it isn't clairvoyant. It is not uncommon that you
-have to tweak these for local conditions. The commands should
-always have fully specified pathnames, as the smdb may not have
-the correct PATH values.
-</para>
-
-<para>
-When you send a job to Samba to be printed, it will make a temporary
-copy of it in the directory specified in the [printers] section.
-and it should be periodically cleaned out. The lpr -r option
-requests that the temporary copy be removed after printing; If
-printing fails then you might find leftover files in this directory,
-and it should be periodically cleaned out. Samba used the lpq
-command to determine the "job number" assigned to your print job
-by the spooler.
-</para>
-
-<para>
-The %&gt;letter&lt; are "macros" that get dynamically replaced with appropriate
-values when they are used. The %s gets replaced with the name of the spool
-file that Samba creates and the %p gets replaced with the name of the
-printer. The %j gets replaced with the "job number" which comes from
-the lpq output.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Debugging printer problems</title>
-
-<para>
-One way to debug printing problems is to start by replacing these
-command with shell scripts that record the arguments and the contents
-of the print file. A simple example of this kind of things might
-be:
-</para>
-
-<para><programlisting>
- print command = /tmp/saveprint %p %s
-
- #!/bin/saveprint
- # we make sure that we are the right user
- /usr/bin/id -p >/tmp/tmp.print
- # we run the command and save the error messages
- # replace the command with the one appropriate for your system
- /usr/bin/lpr -r -P$1 $2 2>>&amp;/tmp/tmp.print
-</programlisting></para>
-
-<para>
-Then you print a file and try removing it. You may find that the
-print queue needs to be stopped in order to see the queue status
-and remove the job:
-</para>
-
-<para><programlisting>
-
-h4: {42} % echo hi >/tmp/hi
-h4: {43} % smbclient //localhost/lw4
-added interface ip=10.0.0.4 bcast=10.0.0.255 nmask=255.255.255.0
-Password:
-Domain=[ASTART] OS=[Unix] Server=[Samba 2.0.7]
-smb: \> print /tmp/hi
-putting file /tmp/hi as hi-17534 (0.0 kb/s) (average 0.0 kb/s)
-smb: \> queue
-1049 3 hi-17534
-smb: \> cancel 1049
-Error cancelling job 1049 : code 0
-smb: \> cancel 1049
-Job 1049 cancelled
-smb: \> queue
-smb: \> exit
-</programlisting></para>
-
-<para>
-The 'code 0' indicates that the job was removed. The comment
-by the smbclient is a bit misleading on this.
-You can observe the command output and then and look at the
-/tmp/tmp.print file to see what the results are. You can quickly
-find out if the problem is with your printing system. Often people
-have problems with their /etc/printcap file or permissions on
-various print queues.
-</para>
-</sect2>
-
-<sect2>
-<title>What printers do I have?</title>
-
-<para>
-You can use the 'testprns' program to check to see if the printer
-name you are using is recognized by Samba. For example, you can
-use:
-</para>
-
-<para><programlisting>
- testprns printer /etc/printcap
-</programlisting></para>
-
-<para>
-Samba can get its printcap information from a file or from a program.
-You can try the following to see the format of the extracted
-information:
-</para>
-
-<para><programlisting>
- testprns -a printer /etc/printcap
-
- testprns -a printer '|/bin/cat printcap'
-</programlisting></para>
-
-</sect2>
-
-<sect2>
-<title>Setting up printcap and print servers</title>
-
-<para>
-You may need to set up some printcaps for your Samba system to use.
-It is strongly recommended that you use the facilities provided by
-the print spooler to set up queues and printcap information.
-</para>
-
-<para>
-Samba requires either a printcap or program to deliver printcap
-information. This printcap information has the format:
-</para>
-
-<para><programlisting>
- name|alias1|alias2...:option=value:...
-</programlisting></para>
-
-<para>
-For almost all printing systems, the printer 'name' must be composed
-only of alphanumeric or underscore '_' characters. Some systems also
-allow hyphens ('-') as well. An alias is an alternative name for the
-printer, and an alias with a space in it is used as a 'comment'
-about the printer. The printcap format optionally uses a \ at the end of lines
-to extend the printcap to multiple lines.
-</para>
-
-<para>
-Here are some examples of printcap files:
-</para>
-
-<para>
-<orderedlist>
-<listitem><para>
-pr just printer name
-</para></listitem>
-<listitem><para>
-pr|alias printer name and alias
-</para></listitem>
-<listitem><para>
-pr|My Printer printer name, alias used as comment
-</para></listitem>
-<listitem><para>
-pr:sh:\ Same as pr:sh:cm= testing
- :cm= \
- testing
-</para></listitem>
-<listitem><para>
-pr:sh Same as pr:sh:cm= testing
- :cm= testing
-</para></listitem>
-</orderedlist>
-</para>
-
-<para>
-Samba reads the printcap information when first started. If you make
-changes in the printcap information, then you must do the following:
-</para>
-
-<orderedlist>
-
-<listitem><para>
-make sure that the print spooler is aware of these changes.
-The LPRng system uses the 'lpc reread' command to do this.
-</para></listitem>
-
-<listitem><para>
-make sure that the spool queues, etc., exist and have the
-correct permissions. The LPRng system uses the 'checkpc -f'
-command to do this.
-</para></listitem>
-
-<listitem><para>
-You now should send a SIGHUP signal to the smbd server to have
-it reread the printcap information.
-</para></listitem>
-</orderedlist>
-
-</sect2>
-
-<sect2>
-<title>Job sent, no output</title>
-
-<para>
-This is the most frustrating part of printing. You may have sent the
-job, verified that the job was forwarded, set up a wrapper around
-the command to send the file, but there was no output from the printer.
-</para>
-
-<para>
-First, check to make sure that the job REALLY is getting to the
-right print queue. If you are using a BSD or LPRng print spooler,
-you can temporarily stop the printing of jobs. Jobs can still be
-submitted, but they will not be printed. Use:
-</para>
-
-<para><programlisting>
- lpc -Pprinter stop
-</programlisting></para>
-
-<para>
-Now submit a print job and then use 'lpq -Pprinter' to see if the
-job is in the print queue. If it is not in the print queue then
-you will have to find out why it is not being accepted for printing.
-</para>
-
-<para>
-Next, you may want to check to see what the format of the job really
-was. With the assistance of the system administrator you can view
-the submitted jobs files. You may be surprised to find that these
-are not in what you would expect to call a printable format.
-You can use the UNIX 'file' utitily to determine what the job
-format actually is:
-</para>
-
-<para><programlisting>
- cd /var/spool/lpd/printer # spool directory of print jobs
- ls # find job files
- file dfA001myhost
-</programlisting></para>
-
-<para>
-You should make sure that your printer supports this format OR that
-your system administrator has installed a 'print filter' that will
-convert the file to a format appropriate for your printer.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Job sent, strange output</title>
-
-<para>
-Once you have the job printing, you can then start worrying about
-making it print nicely.
-</para>
-
-<para>
-The most common problem is extra pages of output: banner pages
-OR blank pages at the end.
-</para>
-
-<para>
-If you are getting banner pages, check and make sure that the
-printcap option or printer option is configured for no banners.
-If you have a printcap, this is the :sh (suppress header or banner
-page) option. You should have the following in your printer.
-</para>
-
-<para><programlisting>
- printer: ... :sh
-</programlisting></para>
-
-<para>
-If you have this option and are still getting banner pages, there
-is a strong chance that your printer is generating them for you
-automatically. You should make sure that banner printing is disabled
-for the printer. This usually requires using the printer setup software
-or procedures supplied by the printer manufacturer.
-</para>
-
-<para>
-If you get an extra page of output, this could be due to problems
-with your job format, or if you are generating PostScript jobs,
-incorrect setting on your printer driver on the MicroSoft client.
-For example, under Win95 there is a option:
-</para>
-
-<para><programlisting>
- Printers|Printer Name|(Right Click)Properties|Postscript|Advanced|
-</programlisting></para>
-
-<para>
-that allows you to choose if a Ctrl-D is appended to all jobs.
-This is a very bad thing to do, as most spooling systems will
-automatically add a ^D to the end of the job if it is detected as
-PostScript. The multiple ^D may cause an additional page of output.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Raw PostScript printed</title>
-
-<para>
-This is a problem that is usually caused by either the print spooling
-system putting information at the start of the print job that makes
-the printer think the job is a text file, or your printer simply
-does not support PostScript. You may need to enable 'Automatic
-Format Detection' on your printer.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Advanced Printing</title>
-
-<para>
-Note that you can do some pretty magic things by using your
-imagination with the "print command" option and some shell scripts.
-Doing print accounting is easy by passing the %U option to a print
-command shell script. You could even make the print command detect
-the type of output and its size and send it to an appropriate
-printer.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Real debugging</title>
-
-<para>
-If the above debug tips don't help, then maybe you need to bring in
-the bug guns, system tracing. See Tracing.txt in this directory.
-</para>
-</sect2>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/samba-doc.sgml b/docs/docbook/projdoc/samba-doc.sgml
deleted file mode 100644
index a729caf99f..0000000000
--- a/docs/docbook/projdoc/samba-doc.sgml
+++ /dev/null
@@ -1,129 +0,0 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-<!ENTITY % globalentities SYSTEM '../global.ent'> %globalentities;
-]>
-
-<book id="Samba-HOWTO-Collection">
-<title>SAMBA Project Documentation</title>
-
-<bookinfo>
- <author>
- <othername>SAMBA Team</othername>
- <affiliation><address><email>samba@samba.org</email></address></affiliation>
- </author>
- <editor>&person.jelmer;</editor>
- <editor>&person.jht;</editor>
- <editor>&person.jerry;</editor>
-
- <pubdate>Monday April 21, 2003</pubdate>
-
-<abstract>
-<para>
-This book is a collection of HOWTOs added to Samba documentation over the years.
-Samba is always under development, and so is its' documentation. This release of the
-documentation represents a major revision or layout as well as contents.
-The most recent version of this document can be found at
-<ulink url="http://www.samba.org/">http://www.samba.org/</ulink>
-on the "Documentation" page. Please send updates to
-<ulink url="mailto:jelmer@samba.org">jelmer@samba.org</ulink>,
-<ulink url="mailto:jht@samba.org">jht@samba.org</ulink> or
-<ulink url="mailto:jerry@samba.org">jerry@samba.org</ulink>.
-</para>
-
-<para>
-The Samba-Team would like to express sincere thanks to the many people who have with
-or without their knowledge contributed to this update. The size and scope of this
-project would not have been possible without significant community contribution. A not
-insignificant number of ideas for inclusion (if not content itself) has been obtained
-from a number of Unofficial HOWTOs - to each such author a big "Thank-you" is also offered.
-Please keep publishing your Unofficial HOWTO's - they are a source of inspiration and
-application knowledge that is most to be desired by many Samba users and administrators.
-</para>
-
-</abstract>
-<legalnotice>
-<para>
-This documentation is distributed under the GNU General Public License (GPL)
-version 2. A copy of the license is included with the Samba source
-distribution. A copy can be found on-line at <ulink
-url="http://www.fsf.org/licenses/gpl.txt">http://www.fsf.org/licenses/gpl.txt</ulink>
-</para>
-</legalnotice>
-</bookinfo>
-
-
-<!-- Chapters -->
-<part id="introduction">
-<title>General Installation</title>
-<partintro>
-<title>Preparing Samba for Configuration</title>
-<para>This section of the Samba-HOWTO-Collection contains general info on how to install samba
-and how to configure the parts of samba you will most likely need.
-PLEASE read this.</para>
-</partintro>
-&IntroSMB;
-&UNIX-INSTALL;
-</part>
-
-<part id="type">
-<title>Server Configuration Basics</title>
-<partintro>
-<title>First Steps in Server Configuration</title>
-<para>
-Samba can operate in various modes within SMB networks. This HOWTO section contains information on
-configuring samba to function as the type of server your network requires. Please read this
-section carefully.
-</para>
-</partintro>
-&ServerType;
-&SECURITY-LEVEL;
-&Samba-PDC-HOWTO;
-&Samba-BDC-HOWTO;
-&ADS-HOWTO;
-&DOMAIN-MEMBER;
-</part>
-
-<part id="optional">
-<title>Advanced Configuration</title>
-<partintro>
-<title>Valuable Nuts and Bolts Information</title>
-<para>
-Samba has several features that you might want or might not want to use. The chapters in this part each cover specific Samba features.
-</para>
-</partintro>
-&NetworkBrowsing;
-&Passdb;
-&NT-Security;
-&GROUP-MAPPING-HOWTO;
-&PRINTER-DRIVER2;
-&CUPS;
-&WINBIND;
-&AdvancedNetworkAdmin;
-&PolicyMgmt;
-&ProfileMgmt;
-&Trusts;
-&Samba-PAM;
-&VFS;
-&MS-Dfs-Setup;
-&IntegratingWithWindows;
-&SecuringSamba;
-&unicode;
-&locking;
-</part>
-
-<part id="troubleshooting">
-<title>Troubleshooting</title>
-&Diagnosis;
-&problems;
-&BUGS;
-</part>
-
-<part id="Appendixes">
-<title>Appendixes</title>
-&Compiling;
-&NT4Migration;
-&Portability;
-&Other-Clients;
-&SWAT;
-&SPEED;
-</part>
-</book>
diff --git a/docs/docbook/projdoc/securing-samba.sgml b/docs/docbook/projdoc/securing-samba.sgml
deleted file mode 100644
index d320767a77..0000000000
--- a/docs/docbook/projdoc/securing-samba.sgml
+++ /dev/null
@@ -1,205 +0,0 @@
-<chapter id="securing-samba">
-
-<chapterinfo>
- &author.tridge;
- &author.jht;
- <pubdate>17 March 2003</pubdate>
-</chapterinfo>
-
-<title>Securing Samba</title>
-
-<sect1>
-<title>Introduction</title>
-<para>
-This note was attached to the Samba 2.2.8 release notes as it contained an
-important security fix. The information contained here applies to Samba
-installations in general.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Using host based protection</title>
-
-<para>
-In many installations of Samba the greatest threat comes for outside
-your immediate network. By default Samba will accept connections from
-any host, which means that if you run an insecure version of Samba on
-a host that is directly connected to the Internet you can be
-especially vulnerable.
-</para>
-
-<para>
-One of the simplest fixes in this case is to use the <command>hosts allow</command> and
-<command>hosts deny</command> options in the Samba &smb.conf; configuration file to only
-allow access to your server from a specific range of hosts. An example
-might be:
-</para>
-
-<para><programlisting>
- hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
- hosts deny = 0.0.0.0/0
-</programlisting></para>
-
-<para>
-The above will only allow SMB connections from 'localhost' (your own
-computer) and from the two private networks 192.168.2 and
-192.168.3. All other connections will be refused as soon
-as the client sends its first packet. The refusal will be marked as a
-'not listening on called name' error.
-</para>
-
-</sect1>
-
-<sect1>
-
-<title>Using interface protection</title>
-
-<para>
-By default Samba will accept connections on any network interface that
-it finds on your system. That means if you have a ISDN line or a PPP
-connection to the Internet then Samba will accept connections on those
-links. This may not be what you want.
-</para>
-
-<para>
-You can change this behaviour using options like the following:
-</para>
-
-<para><programlisting>
- interfaces = eth* lo
- bind interfaces only = yes
-</programlisting></para>
-
-<para>
-This tells Samba to only listen for connections on interfaces with a
-name starting with 'eth' such as eth0, eth1, plus on the loopback
-interface called 'lo'. The name you will need to use depends on what
-OS you are using, in the above I used the common name for Ethernet
-adapters on Linux.
-</para>
-
-<para>
-If you use the above and someone tries to make a SMB connection to
-your host over a PPP interface called 'ppp0' then they will get a TCP
-connection refused reply. In that case no Samba code is run at all as
-the operating system has been told not to pass connections from that
-interface to any samba process.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Using a firewall</title>
-
-<para>
-Many people use a firewall to deny access to services that they don't
-want exposed outside their network. This can be a very good idea,
-although I would recommend using it in conjunction with the above
-methods so that you are protected even if your firewall is not active
-for some reason.
-</para>
-
-<para>
-If you are setting up a firewall then you need to know what TCP and
-UDP ports to allow and block. Samba uses the following:
-</para>
-
-<para><programlisting>
- UDP/137 - used by nmbd
- UDP/138 - used by nmbd
- TCP/139 - used by smbd
- TCP/445 - used by smbd
-</programlisting></para>
-
-<para>
-The last one is important as many older firewall setups may not be
-aware of it, given that this port was only added to the protocol in
-recent years.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Using a IPC$ share deny</title>
-
-<para>
-If the above methods are not suitable, then you could also place a
-more specific deny on the IPC$ share that is used in the recently
-discovered security hole. This allows you to offer access to other
-shares while denying access to IPC$ from potentially untrustworthy
-hosts.
-</para>
-
-<para>
-To do that you could use:
-</para>
-
-<para><programlisting>
- [ipc$]
- hosts allow = 192.168.115.0/24 127.0.0.1
- hosts deny = 0.0.0.0/0
-</programlisting></para>
-
-<para>
-this would tell Samba that IPC$ connections are not allowed from
-anywhere but the two listed places (localhost and a local
-subnet). Connections to other shares would still be allowed. As the
-IPC$ share is the only share that is always accessible anonymously
-this provides some level of protection against attackers that do not
-know a username/password for your host.
-</para>
-
-<para>
-If you use this method then clients will be given a 'access denied'
-reply when they try to access the IPC$ share. That means that those
-clients will not be able to browse shares, and may also be unable to
-access some other resources.
-</para>
-
-<para>
-This is not recommended unless you cannot use one of the other
-methods listed above for some reason.
-</para>
-
-</sect1>
-
-<sect1>
-<title>NTLMv2 Security</title>
-
-<para>
-To configure NTLMv2 authentication the following registry keys are worth knowing about:
-</para>
-
-<para>
-<programlisting>
- [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
- "lmcompatibilitylevel"=dword:00000003
-
- 0x3 - Send NTLMv2 response only. Clients will use NTLMv2 authentication,
- use NTLMv2 session security if the server supports it. Domain
- controllers accept LM, NTLM and NTLMv2 authentication.
-
- [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
- "NtlmMinClientSec"=dword:00080000
-
- 0x80000 - NTLMv2 session security. If either NtlmMinClientSec or
- NtlmMinServerSec is set to 0x80000, the connection will fail if NTLMv2
- session security is not negotiated.
-</programlisting>
-</para>
-</sect1>
-
-<sect1>
-<title>Upgrading Samba</title>
-
-<para>
-Please check regularly on <ulink url="http://www.samba.org/">http://www.samba.org/</ulink> for updates and
-important announcements. Occasionally security releases are made and
-it is highly recommended to upgrade Samba when a security vulnerability
-is discovered.
-</para>
-
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/security_level.sgml b/docs/docbook/projdoc/security_level.sgml
deleted file mode 100644
index f19ec4a1e8..0000000000
--- a/docs/docbook/projdoc/security_level.sgml
+++ /dev/null
@@ -1,340 +0,0 @@
-<chapter id="securitylevels">
-<chapterinfo>
- &author.tridge;
- &author.jelmer;
-</chapterinfo>
-<title>Samba as Stand-Alone Server</title>
-
-<para>
-In this section the function and purpose of Samba's <emphasis>security</emphasis>
-modes are described.
-</para>
-
-<sect1>
-<title>User and Share security level</title>
-
-<para>
-A SMB server tells the client at startup what "security level" it is
-running. There are two options "share level" and "user level". Which
-of these two the client receives affects the way the client then tries
-to authenticate itself. It does not directly affect (to any great
-extent) the way the Samba server does security. I know this is
-strange, but it fits in with the client/server approach of SMB. In SMB
-everything is initiated and controlled by the client, and the server
-can only tell the client what is available and whether an action is
-allowed.
-</para>
-
-<sect2>
-<title>User Level Security</title>
-
-<para>
-I'll describe user level security first, as its simpler. In user level
-security the client will send a "session setup" command directly after
-the protocol negotiation. This contains a username and password. The
-server can either accept or reject that username/password
-combination. Note that at this stage the server has no idea what
-share the client will eventually try to connect to, so it can't base
-the "accept/reject" on anything other than:
-</para>
-
-<orderedlist>
-<listitem><para>the username/password</para></listitem>
-<listitem><para>the machine that the client is coming from</para></listitem>
-</orderedlist>
-
-<para>
-If the server accepts the username/password then the client expects to
-be able to mount any share (using a "tree connection") without
-specifying a password. It expects that all access rights will be as
-the username/password specified in the "session setup".
-</para>
-
-<para>
-It is also possible for a client to send multiple "session setup"
-requests. When the server responds it gives the client a "uid" to use
-as an authentication tag for that username/password. The client can
-maintain multiple authentication contexts in this way (WinDD is an
-example of an application that does this)
-</para>
-
-</sect2>
-
-<sect2>
-<title>Share Level Security</title>
-
-<para>
-Ok, now for share level security. In share level security the client
-authenticates itself separately for each share. It will send a
-password along with each "tree connection" (share mount). It does not
-explicitly send a username with this operation. The client is
-expecting a password to be associated with each share, independent of
-the user. This means that samba has to work out what username the
-client probably wants to use. It is never explicitly sent the
-username. Some commercial SMB servers such as NT actually associate
-passwords directly with shares in share level security, but samba
-always uses the unix authentication scheme where it is a
-username/password that is authenticated, not a "share/password".
-</para>
-
-<para>
-Many clients send a "session setup" even if the server is in share
-level security. They normally send a valid username but no
-password. Samba records this username in a list of "possible
-usernames". When the client then does a "tree connection" it also adds
-to this list the name of the share they try to connect to (useful for
-home directories) and any users listed in the <command>user =</command> &smb.conf;
-line. The password is then checked in turn against these "possible
-usernames". If a match is found then the client is authenticated as
-that user.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Server Level Security</title>
-
-<para>
-Finally "server level" security. In server level security the samba
-server reports to the client that it is in user level security. The
-client then does a "session setup" as described earlier. The samba
-server takes the username/password that the client sends and attempts
-to login to the "password server" by sending exactly the same
-username/password that it got from the client. If that server is in
-user level security and accepts the password then samba accepts the
-clients connection. This allows the samba server to use another SMB
-server as the "password server".
-</para>
-
-<para>
-You should also note that at the very start of all this, where the
-server tells the client what security level it is in, it also tells
-the client if it supports encryption. If it does then it supplies the
-client with a random "cryptkey". The client will then send all
-passwords in encrypted form. You have to compile samba with encryption
-enabled to support this feature, and you have to maintain a separate
-smbpasswd file with SMB style encrypted passwords. It is
-cryptographically impossible to translate from unix style encryption
-to SMB style encryption, although there are some fairly simple management
-schemes by which the two could be kept in sync.
-</para>
-
-<para>
-"security = server" means that Samba reports to clients that
-it is running in "user mode" but actually passes off all authentication
-requests to another "user mode" server. This requires an additional
-parameter "password server =" that points to the real authentication server.
-That real authentication server can be another Samba server or can be a
-Windows NT server, the later natively capable of encrypted password support.
-</para>
-
-<note><para>
-<emphasis>Server</emphasis> level security is incompatible with what is known
-as <emphasis>schannel</emphasis> or "sign and seal" protocols. This means that
-if you want to use <emphasis>server</emphasis> level security you must disable
-the use of "sign and seal" on all machines on your network.
-</para></note>
-
-<sect3>
-<title>Configuring Samba for Seemless Windows Network Integration</title>
-
-<para>
-MS Windows clients may use encrypted passwords as part of a challenege/response
-authentication model (a.k.a. NTLMv1) or alone, or clear text strings for simple
-password based authentication. It should be realized that with the SMB protocol
-the password is passed over the network either in plain text or encrypted, but
-not both in the same authentication request.
-</para>
-
-<para>
-When encrypted passwords are used a password that has been entered by the user
-is encrypted in two ways:
-</para>
-
-<itemizedlist>
- <listitem><para>An MD4 hash of the UNICODE of the password
- string. This is known as the NT hash.
- </para></listitem>
-
- <listitem><para>The password is converted to upper case,
- and then padded or trucated to 14 bytes. This string is
- then appended with 5 bytes of NULL characters and split to
- form two 56 bit DES keys to encrypt a "magic" 8 byte value.
- The resulting 16 bytes for the LanMan hash.
- </para></listitem>
-</itemizedlist>
-
-<para>
-MS Windows 95 pre-service pack 1, MS Windows NT versions 3.x and version 4.0
-pre-service pack 3 will use either mode of password authentication. All
-versions of MS Windows that follow these versions no longer support plain
-text passwords by default.
-</para>
-
-<para>
-MS Windows clients have a habit of dropping network mappings that have been idle
-for 10 minutes or longer. When the user attempts to use the mapped drive
-connection that has been dropped, the client re-establishes the connection using
-a cached copy of the password.
-</para>
-
-<para>
-When Microsoft changed the default password mode, support was dropped for caching
-of the plain text password. This means that when the registry parameter is changed
-to re-enable use of plain text passwords it appears to work, but when a dropped
-service connection mapping attempts to revalidate it will fail if the remote
-authentication server does not support encrypted passwords. This means that it
-is definitely not a good idea to re-enable plain text password support in such clients.
-</para>
-
-<para>
-The following parameters can be used to work around the issue of Windows 9x client
-upper casing usernames and password before transmitting them to the SMB server
-when using clear text authentication.
-</para>
-
-<para><programlisting>
- <ulink url="smb.conf.5.html#PASSWORDLEVEL">passsword level</ulink> = <replaceable>integer</replaceable>
- <ulink url="smb.conf.5.html#USERNAMELEVEL">username level</ulink> = <replaceable>integer</replaceable>
-</programlisting></para>
-
-<para>
-By default Samba will lower case the username before attempting to lookup the user
-in the database of local system accounts. Because UNIX usernames conventionally
-only contain lower case character, the <parameter>username level</parameter> parameter
-is rarely needed.
-</para>
-
-<para>
-However, passwords on UNIX systems often make use of mixed case characters.
-This means that in order for a user on a Windows 9x client to connect to a Samba
-server using clear text authentication, the <parameter>password level</parameter>
-must be set to the maximum number of upper case letter which <emphasis>could</emphasis>
-appear is a password. Note that the server OS uses the traditional DES version
-of crypt(), a <parameter>password level</parameter> of 8 will result in case
-insensitive passwords as seen from Windows users. This will also result in longer
-login times as Samba has to compute the permutations of the password string and
-try them one by one until a match is located (or all combinations fail).
-</para>
-
-<para>
-The best option to adopt is to enable support for encrypted passwords
-where ever Samba is used. There are three configuration possibilities
-for support of encrypted passwords:
-</para>
-
-</sect3>
-<sect3>
-<title>Use MS Windows NT as an authentication server</title>
-
-<para>
-This method involves the additions of the following parameters in the &smb.conf; file:
-</para>
-
-<para><programlisting>
- encrypt passwords = Yes
- security = server
- password server = "NetBIOS_name_of_PDC"
-</programlisting></para>
-
-
-<para>
-There are two ways of identifying whether or not a username and
-password pair was valid or not. One uses the reply information provided
-as part of the authentication messaging process, the other uses
-just an error code.
-</para>
-
-<para>
-The down-side of this mode of configuration is the fact that
-for security reasons Samba will send the password server a bogus
-username and a bogus password and if the remote server fails to
-reject the username and password pair then an alternative mode
-of identification of validation is used. Where a site uses password
-lock out after a certain number of failed authentication attempts
-this will result in user lockouts.
-</para>
-
-<para>
-Use of this mode of authentication does require there to be
-a standard Unix account for the user, this account can be blocked
-to prevent logons by other than MS Windows clients.
-</para>
-
-</sect3>
-</sect2>
-
-<sect2>
-<title>Domain Level Security</title>
-
-<para>
-When samba is operating in <emphasis>security = domain</emphasis> mode this means that
-the Samba server has a domain security trust account (a machine account) and will cause
-all authentication requests to be passed through to the domain controllers.
-</para>
-
-<sect3>
-<title>Samba as a member of an MS Windows NT security domain</title>
-
-<para>
-This method involves addition of the following parameters in the &smb.conf; file:
-</para>
-
-<para><programlisting>
- encrypt passwords = Yes
- security = domain
- workgroup = "name of NT domain"
- password server = *
-</programlisting></para>
-
-<para>
-The use of the "*" argument to <command>password server</command> will cause samba to locate the
-domain controller in a way analogous to the way this is done within MS Windows NT.
-This is the default behaviour.
-</para>
-
-<para>
-In order for this method to work the Samba server needs to join the
-MS Windows NT security domain. This is done as follows:
-</para>
-
-<itemizedlist>
- <listitem><para>On the MS Windows NT domain controller using
- the Server Manager add a machine account for the Samba server.
- </para></listitem>
-
- <listitem><para>Next, on the Linux system execute:
- <command>smbpasswd -r PDC_NAME -j DOMAIN_NAME</command> (samba 2.x)
-
- <command>net join -U administrator%password</command> (samba-3)
- </para></listitem>
-</itemizedlist>
-
-<para>
-Use of this mode of authentication does require there to be a standard Unix account
-for the user in order to assign a uid once the account has been authenticated by
-the remote Windows DC. This account can be blocked to prevent logons by clients other than
-MS Windows through things such as setting an invalid shell in the
-<filename>/etc/passwd</filename> entry.
-</para>
-
-<para>
-An alternative to assigning UIDs to Windows users on a Samba member server is
-presented in the <ulink url="winbind.html">Winbind Overview</ulink> chapter
-in this HOWTO collection.
-</para>
-
-</sect3>
-</sect2>
-
-<sect2>
-<title>ADS Level Security</title>
-
-<para>
-For information about the configuration option please refer to the entire section entitled
-<emphasis>Samba as an ADS Domain Member.</emphasis>
-</para>
-
-</sect2>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/unicode.sgml b/docs/docbook/projdoc/unicode.sgml
deleted file mode 100644
index eaf9990dcb..0000000000
--- a/docs/docbook/projdoc/unicode.sgml
+++ /dev/null
@@ -1,128 +0,0 @@
-<chapter id="unicode">
-<chapterinfo>
- &author.jelmer;
- <author>
- <firstname>TAKAHASHI</firstname><surname>Motonobu</surname>
- <affiliation>
- <address><email>monyo@home.monyo.com</email></address>
- </affiliation>
- </author>
- <pubdate>25 March 2003</pubdate>
-</chapterinfo>
-
-<title>Unicode/Charsets</title>
-
-<sect1>
-<title>What are charsets and unicode?</title>
-
-<para>
-Computers communicate in numbers. In texts, each number will be
-translated to a corresponding letter. The meaning that will be assigned
-to a certain number depends on the <emphasis>character set(charset)
-</emphasis> that is used.
-A charset can be seen as a table that is used to translate numbers to
-letters. Not all computers use the same charset (there are charsets
-with German umlauts, Japanese characters, etc). Usually a charset contains
-256 characters, which means that storing a character with it takes
-exactly one byte. </para>
-
-<para>
-There are also charsets that support even more characters,
-but those need twice(or even more) as much storage space. These
-charsets can contain <command>256 * 256 = 65536</command> characters, which
-is more then all possible characters one could think of. They are called
-multibyte charsets (because they use more then one byte to
-store one character).
-</para>
-
-<para>
-A standardised multibyte charset is unicode, info is available at
-<ulink url="http://www.unicode.org/">www.unicode.org</ulink>.
-A big advantage of using a multibyte charset is that you only need one; no
-need to make sure two computers use the same charset when they are
-communicating.
-</para>
-
-<para>Old windows clients used to use single-byte charsets, named
-'codepages' by microsoft. However, there is no support for
-negotiating the charset to be used in the smb protocol. Thus, you
-have to make sure you are using the same charset when talking to an old client.
-Newer clients (Windows NT, 2K, XP) talk unicode over the wire.
-</para>
-</sect1>
-
-<sect1>
-<title>Samba and charsets</title>
-
-<para>
-As of samba 3.0, samba can (and will) talk unicode over the wire. Internally,
-samba knows of three kinds of character sets:
-</para>
-
-<variablelist>
- <varlistentry>
- <term>unix charset</term>
- <listitem><para>
- This is the charset used internally by your operating system.
- The default is <constant>ASCII</constant>, which is fine for most
- systems.
- </para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>display charset</term>
- <listitem><para>This is the charset samba will use to print messages
- on your screen. It should generally be the same as the <command>unix charset</command>.
- </para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>dos charset</term>
- <listitem><para>This is the charset samba uses when communicating with
- DOS and Windows 9x clients. It will talk unicode to all newer clients.
- The default depends on the charsets you have installed on your system.
- Run <command>testparm -v | grep "dos charset"</command> to see
- what the default is on your system.
- </para></listitem>
- </varlistentry>
-</variablelist>
-
-</sect1>
-
-<sect1>
-<title>Conversion from old names</title>
-
-<para>Because previous samba versions did not do any charset conversion,
-characters in filenames are usually not correct in the unix charset but only
-for the local charset used by the DOS/Windows clients.</para>
-
-<para>The following script from Steve Langasek converts all
-filenames from CP850 to the iso8859-15 charset.</para>
-
-<para>
-<prompt>#</prompt><userinput>find <replaceable>/path/to/share</replaceable> -type f -exec bash -c 'CP="{}"; ISO=`echo -n "$CP" | iconv -f cp850 \
- -t iso8859-15`; if [ "$CP" != "$ISO" ]; then mv "$CP" "$ISO"; fi' \;
-</userinput>
-</para>
-</sect1>
-
-<sect1>
-<title>Japanese charsets</title>
-
-<para>Samba doesn't work correctly with Japanese charsets yet. Here are points of attention when setting it up:</para>
-
-<simplelist>
-<member>You should set <command>mangling method = hash</command></member>
-<member>There are various iconv() implementations around and not all of
-them work equally well. glibc2's iconv() has a critical problem in CP932.
-libiconv-1.8 works with CP932 but still has some problems and does not
-work with EUC-JP. </member>
-<member>You should set <command>dos charset = CP932</command>, not Shift_JIS, SJIS...</member>
-<member>Currently only <command>unix charset = CP932</command> will work (but still has some problems...) because of iconv() issues. <command>unix charset = EUC-JP</command> doesn't work well because of iconv() issues.</member>
-<member>Currently Samba 3.0 does not support <command>unix charset = UTF8-MAC/CAP/HEX/JIS*</command></member>
-</simplelist>
-
-<para>More information (in Japanese) is available at: <ulink url="http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html">http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html</ulink>.</para>
-</sect1>
-
-</chapter>
diff --git a/docs/docbook/projdoc/upgrading-to-3.0.sgml b/docs/docbook/projdoc/upgrading-to-3.0.sgml
deleted file mode 100644
index d092fd7940..0000000000
--- a/docs/docbook/projdoc/upgrading-to-3.0.sgml
+++ /dev/null
@@ -1,41 +0,0 @@
-<chapter id="upgrading-to-3.0">
-<chapterinfo>
- &author.jelmer;
- <pubdate>25 October 2002</pubdate>
-</chapterinfo>
-
-<title>Issues when upgrading from 2.2 to 3.0</title>
-
-<sect1>
-<title>Charsets</title>
-
-<para>You might experience problems with special characters
-when communicating with old DOS clients. Codepage
-support has changed in samba 3.0. Read the chapter
-<link linkend="unicode">Unicode support</link> for details.
-</para>
-
-</sect1>
-
-<sect1>
-<title>add machine script</title>
-
-</sect1>
-
-<sect1>
-<title>Obsolete configuration options</title>
-
-<para>
-In 3.0, the following configuration options have been removed.
-</para>
-
-<simplelist>
-<member>printer driver (replaced by new driver procedures) </member>
-<member>printer driver file (replaced by new driver procedures)</member>
-<member>printer driver location (replaced by new driver procedures)</member>
-<member>use rhosts</member>
-<member>postscript</member>
-<member>client code page (replaced by dos charset)</member>
-</simplelist>
-</sect1>
-</chapter>
diff --git a/docs/docbook/projdoc/winbind.sgml b/docs/docbook/projdoc/winbind.sgml
deleted file mode 100644
index 05460e1a61..0000000000
--- a/docs/docbook/projdoc/winbind.sgml
+++ /dev/null
@@ -1,1136 +0,0 @@
-<chapter id="winbind">
-
-<chapterinfo>
- <authorgroup>
- <author>
- <firstname>Tim</firstname><surname>Potter</surname>
- <affiliation>
- <orgname>Samba Team</orgname>
- <address><email>tpot@linuxcare.com.au</email></address>
- </affiliation>
- </author>
- &author.tridge;
- &author.jht;
- <author>
- <firstname>Naag</firstname><surname>Mummaneni</surname>
- <affiliation>
- <address><email>getnag@rediffmail.com</email></address>
- </affiliation>
- </author>
- &author.jelmer;
- &author.jht;
- </authorgroup>
- <pubdate>27 June 2002</pubdate>
-</chapterinfo>
-
-<title>Unified Logons between Windows NT and UNIX using Winbind</title>
-
-<sect1>
- <title>Abstract</title>
-
- <para>Integration of UNIX and Microsoft Windows NT through
- a unified logon has been considered a "holy grail" in heterogeneous
- computing environments for a long time. We present
- <emphasis>winbind</emphasis>, a component of the Samba suite
- of programs as a solution to the unified logon problem. Winbind
- uses a UNIX implementation
- of Microsoft RPC calls, Pluggable Authentication Modules, and the Name
- Service Switch to allow Windows NT domain users to appear and operate
- as UNIX users on a UNIX machine. This paper describes the winbind
- system, explaining the functionality it provides, how it is configured,
- and how it works internally.</para>
-</sect1>
-
-
-<sect1>
- <title>Introduction</title>
-
- <para>It is well known that UNIX and Microsoft Windows NT have
- different models for representing user and group information and
- use different technologies for implementing them. This fact has
- made it difficult to integrate the two systems in a satisfactory
- manner.</para>
-
- <para>One common solution in use today has been to create
- identically named user accounts on both the UNIX and Windows systems
- and use the Samba suite of programs to provide file and print services
- between the two. This solution is far from perfect however, as
- adding and deleting users on both sets of machines becomes a chore
- and two sets of passwords are required both of which
- can lead to synchronization problems between the UNIX and Windows
- systems and confusion for users.</para>
-
- <para>We divide the unified logon problem for UNIX machines into
- three smaller problems:</para>
-
- <itemizedlist>
- <listitem><para>Obtaining Windows NT user and group information
- </para></listitem>
-
- <listitem><para>Authenticating Windows NT users
- </para></listitem>
-
- <listitem><para>Password changing for Windows NT users
- </para></listitem>
- </itemizedlist>
-
-
- <para>Ideally, a prospective solution to the unified logon problem
- would satisfy all the above components without duplication of
- information on the UNIX machines and without creating additional
- tasks for the system administrator when maintaining users and
- groups on either system. The winbind system provides a simple
- and elegant solution to all three components of the unified logon
- problem.</para>
-</sect1>
-
-
-<sect1>
- <title>What Winbind Provides</title>
-
- <para>Winbind unifies UNIX and Windows NT account management by
- allowing a UNIX box to become a full member of a NT domain. Once
- this is done the UNIX box will see NT users and groups as if
- they were native UNIX users and groups, allowing the NT domain
- to be used in much the same manner that NIS+ is used within
- UNIX-only environments.</para>
-
- <para>The end result is that whenever any
- program on the UNIX machine asks the operating system to lookup
- a user or group name, the query will be resolved by asking the
- NT domain controller for the specified domain to do the lookup.
- Because Winbind hooks into the operating system at a low level
- (via the NSS name resolution modules in the C library) this
- redirection to the NT domain controller is completely
- transparent.</para>
-
- <para>Users on the UNIX machine can then use NT user and group
- names as they would use "native" UNIX names. They can chown files
- so that they are owned by NT domain users or even login to the
- UNIX machine and run a UNIX X-Window session as a domain user.</para>
-
- <para>The only obvious indication that Winbind is being used is
- that user and group names take the form DOMAIN\user and
- DOMAIN\group. This is necessary as it allows Winbind to determine
- that redirection to a domain controller is wanted for a particular
- lookup and which trusted domain is being referenced.</para>
-
- <para>Additionally, Winbind provides an authentication service
- that hooks into the Pluggable Authentication Modules (PAM) system
- to provide authentication via a NT domain to any PAM enabled
- applications. This capability solves the problem of synchronizing
- passwords between systems since all passwords are stored in a single
- location (on the domain controller).</para>
-
- <sect2>
- <title>Target Uses</title>
-
- <para>Winbind is targeted at organizations that have an
- existing NT based domain infrastructure into which they wish
- to put UNIX workstations or servers. Winbind will allow these
- organizations to deploy UNIX workstations without having to
- maintain a separate account infrastructure. This greatly
- simplifies the administrative overhead of deploying UNIX
- workstations into a NT based organization.</para>
-
- <para>Another interesting way in which we expect Winbind to
- be used is as a central part of UNIX based appliances. Appliances
- that provide file and print services to Microsoft based networks
- will be able to use Winbind to provide seamless integration of
- the appliance into the domain.</para>
- </sect2>
-</sect1>
-
-
-
-<sect1>
- <title>How Winbind Works</title>
-
- <para>The winbind system is designed around a client/server
- architecture. A long running <command>winbindd</command> daemon
- listens on a UNIX domain socket waiting for requests
- to arrive. These requests are generated by the NSS and PAM
- clients and processed sequentially.</para>
-
- <para>The technologies used to implement winbind are described
- in detail below.</para>
-
- <sect2>
- <title>Microsoft Remote Procedure Calls</title>
-
- <para>Over the last few years, efforts have been underway
- by various Samba Team members to decode various aspects of
- the Microsoft Remote Procedure Call (MSRPC) system. This
- system is used for most network related operations between
- Windows NT machines including remote management, user authentication
- and print spooling. Although initially this work was done
- to aid the implementation of Primary Domain Controller (PDC)
- functionality in Samba, it has also yielded a body of code which
- can be used for other purposes.</para>
-
- <para>Winbind uses various MSRPC calls to enumerate domain users
- and groups and to obtain detailed information about individual
- users or groups. Other MSRPC calls can be used to authenticate
- NT domain users and to change user passwords. By directly querying
- a Windows PDC for user and group information, winbind maps the
- NT account information onto UNIX user and group names.</para>
- </sect2>
-
- <sect2>
- <title>Microsoft Active Directory Services</title>
-
- <para>
- Since late 2001, Samba has gained the ability to
- interact with Microsoft Windows 2000 using its 'Native
- Mode' protocols, rather than the NT4 RPC services.
- Using LDAP and Kerberos, a domain member running
- winbind can enumerate users and groups in exactly the
- same way as a Win2k client would, and in so doing
- provide a much more efficient and
- effective winbind implementation.
- </para>
- </sect2>
-
- <sect2>
- <title>Name Service Switch</title>
-
- <para>The Name Service Switch, or NSS, is a feature that is
- present in many UNIX operating systems. It allows system
- information such as hostnames, mail aliases and user information
- to be resolved from different sources. For example, a standalone
- UNIX workstation may resolve system information from a series of
- flat files stored on the local filesystem. A networked workstation
- may first attempt to resolve system information from local files,
- and then consult a NIS database for user information or a DNS server
- for hostname information.</para>
-
- <para>The NSS application programming interface allows winbind
- to present itself as a source of system information when
- resolving UNIX usernames and groups. Winbind uses this interface,
- and information obtained from a Windows NT server using MSRPC
- calls to provide a new source of account enumeration. Using standard
- UNIX library calls, one can enumerate the users and groups on
- a UNIX machine running winbind and see all users and groups in
- a NT domain plus any trusted domain as though they were local
- users and groups.</para>
-
- <para>The primary control file for NSS is
- <filename>/etc/nsswitch.conf</filename>.
- When a UNIX application makes a request to do a lookup
- the C library looks in <filename>/etc/nsswitch.conf</filename>
- for a line which matches the service type being requested, for
- example the "passwd" service type is used when user or group names
- are looked up. This config line species which implementations
- of that service should be tried and in what order. If the passwd
- config line is:</para>
-
- <para><command>passwd: files example</command></para>
-
- <para>then the C library will first load a module called
- <filename>/lib/libnss_files.so</filename> followed by
- the module <filename>/lib/libnss_example.so</filename>. The
- C library will dynamically load each of these modules in turn
- and call resolver functions within the modules to try to resolve
- the request. Once the request is resolved the C library returns the
- result to the application.</para>
-
- <para>This NSS interface provides a very easy way for Winbind
- to hook into the operating system. All that needs to be done
- is to put <filename>libnss_winbind.so</filename> in <filename>/lib/</filename>
- then add "winbind" into <filename>/etc/nsswitch.conf</filename> at
- the appropriate place. The C library will then call Winbind to
- resolve user and group names.</para>
- </sect2>
-
- <sect2>
- <title>Pluggable Authentication Modules</title>
-
- <para>Pluggable Authentication Modules, also known as PAM,
- is a system for abstracting authentication and authorization
- technologies. With a PAM module it is possible to specify different
- authentication methods for different system applications without
- having to recompile these applications. PAM is also useful
- for implementing a particular policy for authorization. For example,
- a system administrator may only allow console logins from users
- stored in the local password file but only allow users resolved from
- a NIS database to log in over the network.</para>
-
- <para>Winbind uses the authentication management and password
- management PAM interface to integrate Windows NT users into a
- UNIX system. This allows Windows NT users to log in to a UNIX
- machine and be authenticated against a suitable Primary Domain
- Controller. These users can also change their passwords and have
- this change take effect directly on the Primary Domain Controller.
- </para>
-
- <para>PAM is configured by providing control files in the directory
- <filename>/etc/pam.d/</filename> for each of the services that
- require authentication. When an authentication request is made
- by an application the PAM code in the C library looks up this
- control file to determine what modules to load to do the
- authentication check and in what order. This interface makes adding
- a new authentication service for Winbind very easy, all that needs
- to be done is that the <filename>pam_winbind.so</filename> module
- is copied to <filename>/lib/security/</filename> and the PAM
- control files for relevant services are updated to allow
- authentication via winbind. See the PAM documentation
- for more details.</para>
- </sect2>
-
-
- <sect2>
- <title>User and Group ID Allocation</title>
-
- <para>When a user or group is created under Windows NT
- is it allocated a numerical relative identifier (RID). This is
- slightly different to UNIX which has a range of numbers that are
- used to identify users, and the same range in which to identify
- groups. It is winbind's job to convert RIDs to UNIX id numbers and
- vice versa. When winbind is configured it is given part of the UNIX
- user id space and a part of the UNIX group id space in which to
- store Windows NT users and groups. If a Windows NT user is
- resolved for the first time, it is allocated the next UNIX id from
- the range. The same process applies for Windows NT groups. Over
- time, winbind will have mapped all Windows NT users and groups
- to UNIX user ids and group ids.</para>
-
- <para>The results of this mapping are stored persistently in
- an ID mapping database held in a tdb database). This ensures that
- RIDs are mapped to UNIX IDs in a consistent way.</para>
- </sect2>
-
-
- <sect2>
- <title>Result Caching</title>
-
- <para>An active system can generate a lot of user and group
- name lookups. To reduce the network cost of these lookups winbind
- uses a caching scheme based on the SAM sequence number supplied
- by NT domain controllers. User or group information returned
- by a PDC is cached by winbind along with a sequence number also
- returned by the PDC. This sequence number is incremented by
- Windows NT whenever any user or group information is modified. If
- a cached entry has expired, the sequence number is requested from
- the PDC and compared against the sequence number of the cached entry.
- If the sequence numbers do not match, then the cached information
- is discarded and up to date information is requested directly
- from the PDC.</para>
- </sect2>
-</sect1>
-
-
-<sect1>
- <title>Installation and Configuration</title>
-
-<para>
-Many thanks to John Trostel <ulink
-url="mailto:jtrostel@snapserver.com">jtrostel@snapserver.com</ulink>
-for providing the HOWTO for this section.
-</para>
-
-<para>
-This HOWTO describes how to get winbind services up and running
-to control access and authenticate users on your Linux box using
-the winbind services which come with SAMBA 2.2.2.
-</para>
-
-<sect2>
-<title>Introduction</title>
-
-<para>
-This HOWTO describes the procedures used to get winbind up and
-running on my RedHat 7.1 system. Winbind is capable of providing access
-and authentication control for Windows Domain users through an NT
-or Win2K PDC for 'regular' services, such as telnet a nd ftp, as
-well for SAMBA services.
-</para>
-
-<para>
-This HOWTO has been written from a 'RedHat-centric' perspective, so if
-you are using another distribution, you may have to modify the instructions
-somewhat to fit the way your distribution works.
-</para>
-
-
-<itemizedlist>
-<listitem>
- <para>
- <emphasis>Why should I to this?</emphasis>
- </para>
-
- <para>This allows the SAMBA administrator to rely on the
- authentication mechanisms on the NT/Win2K PDC for the authentication
- of domain members. NT/Win2K users no longer need to have separate
- accounts on the SAMBA server.
- </para>
-</listitem>
-
-<listitem>
- <para>
- <emphasis>Who should be reading this document?</emphasis>
- </para>
-
- <para>
- This HOWTO is designed for system administrators. If you are
- implementing SAMBA on a file server and wish to (fairly easily)
- integrate existing NT/Win2K users from your PDC onto the
- SAMBA server, this HOWTO is for you. That said, I am no NT or PAM
- expert, so you may find a better or easier way to accomplish
- these tasks.
- </para>
-</listitem>
-</itemizedlist>
-</sect2>
-
-
-<sect2>
-<title>Requirements</title>
-
-<para>
-If you have a samba configuration file that you are currently
-using... <emphasis>BACK IT UP!</emphasis> If your system already uses PAM,
-<emphasis>back up the <filename>/etc/pam.d</filename> directory
-contents!</emphasis> If you haven't already made a boot disk,
-<emphasis>MAKE ONE NOW!</emphasis>
-</para>
-
-<para>
-Messing with the pam configuration files can make it nearly impossible
-to log in to yourmachine. That's why you want to be able to boot back
-into your machine in single user mode and restore your
-<filename>/etc/pam.d</filename> back to the original state they were in if
-you get frustrated with the way things are going. ;-)
-</para>
-
-<para>
-The latest version of SAMBA (version 3.0 as of this writing), now
-includes a functioning winbindd daemon. Please refer to the
-<ulink url="http://samba.org/">main SAMBA web page</ulink> or,
-better yet, your closest SAMBA mirror site for instructions on
-downloading the source code.
-</para>
-
-<para>
-To allow Domain users the ability to access SAMBA shares and
-files, as well as potentially other services provided by your
-SAMBA machine, PAM (pluggable authentication modules) must
-be setup properly on your machine. In order to compile the
-winbind modules, you should have at least the pam libraries resident
-on your system. For recent RedHat systems (7.1, for instance), that
-means <filename>pam-0.74-22</filename>. For best results, it is helpful to also
-install the development packages in <filename>pam-devel-0.74-22</filename>.
-</para>
-
-</sect2>
-
-
-<sect2>
-<title>Testing Things Out</title>
-
-<para>
-Before starting, it is probably best to kill off all the SAMBA
-related daemons running on your server. Kill off all <command>smbd</command>,
-<command>nmbd</command>, and <command>winbindd</command> processes that may
-be running. To use PAM, you will want to make sure that you have the
-standard PAM package (for RedHat) which supplies the <filename>/etc/pam.d</filename>
-directory structure, including the pam modules are used by pam-aware
-services, several pam libraries, and the <filename>/usr/doc</filename>
-and <filename>/usr/man</filename> entries for pam. Winbind built better
-in SAMBA if the pam-devel package was also installed. This package includes
-the header files needed to compile pam-aware applications. For instance,
-my RedHat system has both <filename>pam-0.74-22</filename> and
-<filename>pam-devel-0.74-22</filename> RPMs installed.
-</para>
-
-<sect3>
-<title>Configure and compile SAMBA</title>
-
-<para>
-The configuration and compilation of SAMBA is pretty straightforward.
-The first three steps may not be necessary depending upon
-whether or not you have previously built the Samba binaries.
-</para>
-
-<para><programlisting>
-<prompt>root#</prompt> <command>autoconf</command>
-<prompt>root#</prompt> <command>make clean</command>
-<prompt>root#</prompt> <command>rm config.cache</command>
-<prompt>root#</prompt> <command>./configure</command>
-<prompt>root#</prompt> <command>make</command>
-<prompt>root#</prompt> <command>make install</command>
-</programlisting></para>
-
-
-<para>
-This will, by default, install SAMBA in <filename>/usr/local/samba</filename>.
-See the main SAMBA documentation if you want to install SAMBA somewhere else.
-It will also build the winbindd executable and libraries.
-</para>
-
-</sect3>
-
-<sect3>
-<title>Configure <filename>nsswitch.conf</filename> and the
-winbind libraries</title>
-
-<para>
-The libraries needed to run the <command>winbindd</command> daemon
-through nsswitch need to be copied to their proper locations, so
-</para>
-
-<para>
-<prompt>root#</prompt> <command>cp ../samba/source/nsswitch/libnss_winbind.so /lib</command>
-</para>
-
-<para>
-I also found it necessary to make the following symbolic link:
-</para>
-
-<para>
-<prompt>root#</prompt> <command>ln -s /lib/libnss_winbind.so /lib/libnss_winbind.so.2</command>
-</para>
-
-<para>And, in the case of Sun solaris:</para>
-<para>
-<prompt>root#</prompt> <command>ln -s /usr/lib/libnss_winbind.so /usr/lib/libnss_winbind.so.1</command>
-<prompt>root#</prompt> <command>ln -s /usr/lib/libnss_winbind.so /usr/lib/nss_winbind.so.1</command>
-<prompt>root#</prompt> <command>ln -s /usr/lib/libnss_winbind.so /usr/lib/nss_winbind.so.2</command>
-</para>
-
-<para>
-Now, as root you need to edit <filename>/etc/nsswitch.conf</filename> to
-allow user and group entries to be visible from the <command>winbindd</command>
-daemon. My <filename>/etc/nsswitch.conf</filename> file look like
-this after editing:
-</para>
-
-<para><programlisting>
- passwd: files winbind
- shadow: files
- group: files winbind
-</programlisting></para>
-
-<para>
-The libraries needed by the winbind daemon will be automatically
-entered into the <command>ldconfig</command> cache the next time
-your system reboots, but it
-is faster (and you don't need to reboot) if you do it manually:
-</para>
-
-<para>
-<prompt>root#</prompt> <command>/sbin/ldconfig -v | grep winbind</command>
-</para>
-
-<para>
-This makes <filename>libnss_winbind</filename> available to winbindd
-and echos back a check to you.
-</para>
-
-</sect3>
-
-
-<sect3>
-<title>Configure smb.conf</title>
-
-<para>
-Several parameters are needed in the smb.conf file to control
-the behavior of <command>winbindd</command>. Configure
-<filename>smb.conf</filename> These are described in more detail in
-the <ulink url="winbindd.8.html">winbindd(8)</ulink> man page. My
-<filename>smb.conf</filename> file was modified to
-include the following entries in the [global] section:
-</para>
-
-<para><programlisting>
-[global]
- &lt;...&gt;
- # separate domain and username with '+', like DOMAIN+username
- <ulink url="winbindd.8.html#WINBINDSEPARATOR">winbind separator</ulink> = +
- # use uids from 10000 to 20000 for domain users
- <ulink url="winbindd.8.html#WINBINDUID">winbind uid</ulink> = 10000-20000
- # use gids from 10000 to 20000 for domain groups
- <ulink url="winbindd.8.html#WINBINDGID">winbind gid</ulink> = 10000-20000
- # allow enumeration of winbind users and groups
- <ulink url="winbindd.8.html#WINBINDENUMUSERS">winbind enum users</ulink> = yes
- <ulink url="winbindd.8.html#WINBINDENUMGROUP">winbind enum groups</ulink> = yes
- # give winbind users a real shell (only needed if they have telnet access)
- <ulink url="winbindd.8.html#TEMPLATEHOMEDIR">template homedir</ulink> = /home/winnt/%D/%U
- <ulink url="winbindd.8.html#TEMPLATESHELL">template shell</ulink> = /bin/bash
-</programlisting></para>
-
-</sect3>
-
-
-<sect3>
-<title>Join the SAMBA server to the PDC domain</title>
-
-<para>
-Enter the following command to make the SAMBA server join the
-PDC domain, where <replaceable>DOMAIN</replaceable> is the name of
-your Windows domain and <replaceable>Administrator</replaceable> is
-a domain user who has administrative privileges in the domain.
-</para>
-
-
-<para>
-<prompt>root#</prompt> <command>/usr/local/samba/bin/net join -S PDC -U Administrator</command>
-</para>
-
-
-<para>
-The proper response to the command should be: "Joined the domain
-<replaceable>DOMAIN</replaceable>" where <replaceable>DOMAIN</replaceable>
-is your DOMAIN name.
-</para>
-
-</sect3>
-
-
-<sect3>
-<title>Start up the winbindd daemon and test it!</title>
-
-<para>
-Eventually, you will want to modify your smb startup script to
-automatically invoke the winbindd daemon when the other parts of
-SAMBA start, but it is possible to test out just the winbind
-portion first. To start up winbind services, enter the following
-command as root:
-</para>
-
-<para>
-<prompt>root#</prompt> <command>/usr/local/samba/bin/winbindd</command>
-</para>
-
-<para>
-Winbindd can now also run in 'dual daemon mode'. This will make it
-run as 2 processes. The first will answer all requests from the cache,
-thus making responses to clients faster. The other will
-update the cache for the query that the first has just responded.
-Advantage of this is that responses stay accurate and are faster.
-You can enable dual daemon mode by adding '-B' to the commandline:
-</para>
-
-<para>
-<prompt>root#</prompt> <command>/usr/local/samba/bin/winbindd -B</command>
-</para>
-
-<para>
-I'm always paranoid and like to make sure the daemon
-is really running...
-</para>
-
-<para>
-<prompt>root#</prompt> <command>ps -ae | grep winbindd</command>
-</para>
-<para>
-This command should produce output like this, if the daemon is running
-</para>
-<para>
-3025 ? 00:00:00 winbindd
-</para>
-
-<para>
-Now... for the real test, try to get some information about the
-users on your PDC
-</para>
-
-<para>
-<prompt>root#</prompt> <command>/usr/local/samba/bin/wbinfo -u</command>
-</para>
-
-<para>
-This should echo back a list of users on your Windows users on
-your PDC. For example, I get the following response:
-</para>
-
-<para><programlisting>
- CEO+Administrator
- CEO+burdell
- CEO+Guest
- CEO+jt-ad
- CEO+krbtgt
- CEO+TsInternetUser
-</programlisting></para>
-
-<para>
-Obviously, I have named my domain 'CEO' and my <parameter>winbind
-separator</parameter> is '+'.
-</para>
-
-<para>
-You can do the same sort of thing to get group information from
-the PDC:
-</para>
-
-<para><programlisting>
-<prompt>root#</prompt> <command>/usr/local/samba/bin/wbinfo -g</command>
- CEO+Domain Admins
- CEO+Domain Users
- CEO+Domain Guests
- CEO+Domain Computers
- CEO+Domain Controllers
- CEO+Cert Publishers
- CEO+Schema Admins
- CEO+Enterprise Admins
- CEO+Group Policy Creator Owners
-</programlisting></para>
-
-<para>
-The function 'getent' can now be used to get unified
-lists of both local and PDC users and groups.
-Try the following command:
-</para>
-
-<para>
-<prompt>root#</prompt> <command>getent passwd</command>
-</para>
-
-<para>
-You should get a list that looks like your <filename>/etc/passwd</filename>
-list followed by the domain users with their new uids, gids, home
-directories and default shells.
-</para>
-
-<para>
-The same thing can be done for groups with the command
-</para>
-
-<para>
-<prompt>root#</prompt> <command>getent group</command>
-</para>
-
-</sect3>
-
-
-<sect3>
-<title>Fix the init.d startup scripts</title>
-
-<sect4>
-<title>Linux</title>
-
-<para>
-The <command>winbindd</command> daemon needs to start up after the
-<command>smbd</command> and <command>nmbd</command> daemons are running.
-To accomplish this task, you need to modify the startup scripts of your system.
-They are located at <filename>/etc/init.d/smb</filename> in RedHat and
-<filename>/etc/init.d/samba</filename> in Debian.
-script to add commands to invoke this daemon in the proper sequence. My
-startup script starts up <command>smbd</command>,
-<command>nmbd</command>, and <command>winbindd</command> from the
-<filename>/usr/local/samba/bin</filename> directory directly. The 'start'
-function in the script looks like this:
-</para>
-
-<para><programlisting>
-start() {
- KIND="SMB"
- echo -n $"Starting $KIND services: "
- daemon /usr/local/samba/bin/smbd $SMBDOPTIONS
- RETVAL=$?
- echo
- KIND="NMB"
- echo -n $"Starting $KIND services: "
- daemon /usr/local/samba/bin/nmbd $NMBDOPTIONS
- RETVAL2=$?
- echo
- KIND="Winbind"
- echo -n $"Starting $KIND services: "
- daemon /usr/local/samba/bin/winbindd
- RETVAL3=$?
- echo
- [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 -a $RETVAL3 -eq 0 ] &amp;&amp; \
- touch /var/lock/subsys/smb || RETVAL=1
- return $RETVAL
-}
-</programlisting></para>
-
-<para>If you would like to run winbindd in dual daemon mode, replace
-the line
-<programlisting>
- daemon /usr/local/samba/bin/winbindd
-</programlisting>
-
-in the example above with:
-
-<programlisting>
- daemon /usr/local/samba/bin/winbindd -B
-</programlisting>.
-</para>
-
-<para>
-The 'stop' function has a corresponding entry to shut down the
-services and looks like this:
-</para>
-
-<para><programlisting>
-stop() {
- KIND="SMB"
- echo -n $"Shutting down $KIND services: "
- killproc smbd
- RETVAL=$?
- echo
- KIND="NMB"
- echo -n $"Shutting down $KIND services: "
- killproc nmbd
- RETVAL2=$?
- echo
- KIND="Winbind"
- echo -n $"Shutting down $KIND services: "
- killproc winbindd
- RETVAL3=$?
- [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 -a $RETVAL3 -eq 0 ] &amp;&amp; \
- rm -f /var/lock/subsys/smb
- echo ""
- return $RETVAL
-}
-</programlisting></para>
-</sect4>
-
-<sect4>
-<title>Solaris</title>
-
-<para>Winbind doesn't work on solaris 9, see the <link linkend="winbind-solaris9">Portability</link> chapter for details.</para>
-
-<para>On solaris, you need to modify the
-<filename>/etc/init.d/samba.server</filename> startup script. It usually
-only starts smbd and nmbd but should now start winbindd too. If you
-have samba installed in <filename>/usr/local/samba/bin</filename>,
-the file could contains something like this:
-</para>
-
-<para><programlisting>
- ##
- ## samba.server
- ##
-
- if [ ! -d /usr/bin ]
- then # /usr not mounted
- exit
- fi
-
- killproc() { # kill the named process(es)
- pid=`/usr/bin/ps -e |
- /usr/bin/grep -w $1 |
- /usr/bin/sed -e 's/^ *//' -e 's/ .*//'`
- [ "$pid" != "" ] &amp;&amp; kill $pid
- }
-
- # Start/stop processes required for samba server
-
- case "$1" in
-
- 'start')
- #
- # Edit these lines to suit your installation (paths, workgroup, host)
- #
- echo Starting SMBD
- /usr/local/samba/bin/smbd -D -s \
- /usr/local/samba/smb.conf
-
- echo Starting NMBD
- /usr/local/samba/bin/nmbd -D -l \
- /usr/local/samba/var/log -s /usr/local/samba/smb.conf
-
- echo Starting Winbind Daemon
- /usr/local/samba/bin/winbindd
- ;;
-
- 'stop')
- killproc nmbd
- killproc smbd
- killproc winbindd
- ;;
-
- *)
- echo "Usage: /etc/init.d/samba.server { start | stop }"
- ;;
- esac
-</programlisting></para>
-
-<para>
-Again, if you would like to run samba in dual daemon mode, replace
-<programlisting>
- /usr/local/samba/bin/winbindd
-</programlisting>
-
-in the script above with:
-
-<programlisting>
- /usr/local/samba/bin/winbindd -B
-</programlisting>
-</para>
-
-</sect4>
-
-<sect4>
-<title>Restarting</title>
-<para>
-If you restart the <command>smbd</command>, <command>nmbd</command>,
-and <command>winbindd</command> daemons at this point, you
-should be able to connect to the samba server as a domain member just as
-if you were a local user.
-</para>
-</sect4>
-</sect3>
-
-<sect3>
-<title>Configure Winbind and PAM</title>
-
-<para>
-If you have made it this far, you know that winbindd and samba are working
-together. If you want to use winbind to provide authentication for other
-services, keep reading. The pam configuration files need to be altered in
-this step. (Did you remember to make backups of your original
-<filename>/etc/pam.d</filename> files? If not, do it now.)
-</para>
-
-<para>
-You will need a pam module to use winbindd with these other services. This
-module will be compiled in the <filename>../source/nsswitch</filename> directory
-by invoking the command
-</para>
-
-<para>
-<prompt>root#</prompt> <command>make nsswitch/pam_winbind.so</command>
-</para>
-
-<para>
-from the <filename>../source</filename> directory. The
-<filename>pam_winbind.so</filename> file should be copied to the location of
-your other pam security modules. On my RedHat system, this was the
-<filename>/lib/security</filename> directory. On Solaris, the pam security
-modules reside in <filename>/usr/lib/security</filename>.
-</para>
-
-<para>
-<prompt>root#</prompt> <command>cp ../samba/source/nsswitch/pam_winbind.so /lib/security</command>
-</para>
-
-<sect4>
-<title>Linux/FreeBSD-specific PAM configuration</title>
-
-<para>
-The <filename>/etc/pam.d/samba</filename> file does not need to be changed. I
-just left this fileas it was:
-</para>
-
-
-<para><programlisting>
- auth required /lib/security/pam_stack.so service=system-auth
- account required /lib/security/pam_stack.so service=system-auth
-</programlisting></para>
-
-<para>
-The other services that I modified to allow the use of winbind
-as an authentication service were the normal login on the console (or a terminal
-session), telnet logins, and ftp service. In order to enable these
-services, you may first need to change the entries in
-<filename>/etc/xinetd.d</filename> (or <filename>/etc/inetd.conf</filename>).
-RedHat 7.1 uses the new xinetd.d structure, in this case you need
-to change the lines in <filename>/etc/xinetd.d/telnet</filename>
-and <filename>/etc/xinetd.d/wu-ftp</filename> from
-</para>
-
-<para><programlisting>
- enable = no
-</programlisting></para>
-
-<para>
-to
-</para>
-
-<para><programlisting>
- enable = yes
-</programlisting></para>
-
-<para>
-For ftp services to work properly, you will also need to either
-have individual directories for the domain users already present on
-the server, or change the home directory template to a general
-directory for all domain users. These can be easily set using
-the <filename>smb.conf</filename> global entry
-<command>template homedir</command>.
-</para>
-
-<para>
-The <filename>/etc/pam.d/ftp</filename> file can be changed
-to allow winbind ftp access in a manner similar to the
-samba file. My <filename>/etc/pam.d/ftp</filename> file was
-changed to look like this:
-</para>
-
-<para><programlisting>
- auth required /lib/security/pam_listfile.so item=user sense=deny \
- file=/etc/ftpusers onerr=succeed
- auth sufficient /lib/security/pam_winbind.so
- auth required /lib/security/pam_stack.so service=system-auth
- auth required /lib/security/pam_shells.so
- account sufficient /lib/security/pam_winbind.so
- account required /lib/security/pam_stack.so service=system-auth
- session required /lib/security/pam_stack.so service=system-auth
-</programlisting></para>
-
-<para>
-The <filename>/etc/pam.d/login</filename> file can be changed nearly the
-same way. It now looks like this:
-</para>
-
-<para><programlisting>
- auth required /lib/security/pam_securetty.so
- auth sufficient /lib/security/pam_winbind.so
- auth sufficient /lib/security/pam_unix.so use_first_pass
- auth required /lib/security/pam_stack.so service=system-auth
- auth required /lib/security/pam_nologin.so
- account sufficient /lib/security/pam_winbind.so
- account required /lib/security/pam_stack.so service=system-auth
- password required /lib/security/pam_stack.so service=system-auth
- session required /lib/security/pam_stack.so service=system-auth
- session optional /lib/security/pam_console.so
-</programlisting></para>
-
-<para>
-In this case, I added the <command>auth sufficient /lib/security/pam_winbind.so</command>
-lines as before, but also added the <command>required pam_securetty.so</command>
-above it, to disallow root logins over the network. I also added a
-<command>sufficient /lib/security/pam_unix.so use_first_pass</command>
-line after the <command>winbind.so</command> line to get rid of annoying
-double prompts for passwords.
-</para>
-
-</sect4>
-
-<sect4>
-<title>Solaris-specific configuration</title>
-
-<para>
-The /etc/pam.conf needs to be changed. I changed this file so that my Domain
-users can logon both locally as well as telnet.The following are the changes
-that I made.You can customize the pam.conf file as per your requirements,but
-be sure of those changes because in the worst case it will leave your system
-nearly impossible to boot.
-</para>
-
-<para><programlisting>
- #
- #ident "@(#)pam.conf 1.14 99/09/16 SMI"
- #
- # Copyright (c) 1996-1999, Sun Microsystems, Inc.
- # All Rights Reserved.
- #
- # PAM configuration
- #
- # Authentication management
- #
- login auth required /usr/lib/security/pam_winbind.so
- login auth required /usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
- login auth required /usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass
- #
- rlogin auth sufficient /usr/lib/security/pam_winbind.so
- rlogin auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1
- rlogin auth required /usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
- #
- dtlogin auth sufficient /usr/lib/security/pam_winbind.so
- dtlogin auth required /usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
- #
- rsh auth required /usr/lib/security/$ISA/pam_rhosts_auth.so.1
- other auth sufficient /usr/lib/security/pam_winbind.so
- other auth required /usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
- #
- # Account management
- #
- login account sufficient /usr/lib/security/pam_winbind.so
- login account requisite /usr/lib/security/$ISA/pam_roles.so.1
- login account required /usr/lib/security/$ISA/pam_unix.so.1
- #
- dtlogin account sufficient /usr/lib/security/pam_winbind.so
- dtlogin account requisite /usr/lib/security/$ISA/pam_roles.so.1
- dtlogin account required /usr/lib/security/$ISA/pam_unix.so.1
- #
- other account sufficient /usr/lib/security/pam_winbind.so
- other account requisite /usr/lib/security/$ISA/pam_roles.so.1
- other account required /usr/lib/security/$ISA/pam_unix.so.1
- #
- # Session management
- #
- other session required /usr/lib/security/$ISA/pam_unix.so.1
- #
- # Password management
- #
- #other password sufficient /usr/lib/security/pam_winbind.so
- other password required /usr/lib/security/$ISA/pam_unix.so.1
- dtsession auth required /usr/lib/security/$ISA/pam_unix.so.1
- #
- # Support for Kerberos V5 authentication (uncomment to use Kerberos)
- #
- #rlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
- #login auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
- #dtlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
- #other auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
- #dtlogin account optional /usr/lib/security/$ISA/pam_krb5.so.1
- #other account optional /usr/lib/security/$ISA/pam_krb5.so.1
- #other session optional /usr/lib/security/$ISA/pam_krb5.so.1
- #other password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
-</programlisting></para>
-
-<para>
-I also added a try_first_pass line after the winbind.so line to get rid of
-annoying double prompts for passwords.
-</para>
-
-<para>
-Now restart your Samba and try connecting through your application that you
-configured in the pam.conf.
-</para>
-
-</sect4>
-
-</sect3>
-
-</sect2>
-
-</sect1>
-
-<sect1>
- <title>Limitations</title>
-
- <para>Winbind has a number of limitations in its current
- released version that we hope to overcome in future
- releases:</para>
-
- <itemizedlist>
- <listitem><para>Winbind is currently only available for
- the Linux, Solaris and IRIX operating systems, although ports to other operating
- systems are certainly possible. For such ports to be feasible,
- we require the C library of the target operating system to
- support the Name Service Switch and Pluggable Authentication
- Modules systems. This is becoming more common as NSS and
- PAM gain support among UNIX vendors.</para></listitem>
-
- <listitem><para>The mappings of Windows NT RIDs to UNIX ids
- is not made algorithmically and depends on the order in which
- unmapped users or groups are seen by winbind. It may be difficult
- to recover the mappings of rid to UNIX id mapping if the file
- containing this information is corrupted or destroyed.</para>
- </listitem>
-
- <listitem><para>Currently the winbind PAM module does not take
- into account possible workstation and logon time restrictions
- that may be been set for Windows NT users, this is
- instead up to the PDC to enforce.</para></listitem>
- </itemizedlist>
-</sect1>
-
-
-<sect1>
- <title>Conclusion</title>
-
- <para>The winbind system, through the use of the Name Service
- Switch, Pluggable Authentication Modules, and appropriate
- Microsoft RPC calls have allowed us to provide seamless
- integration of Microsoft Windows NT domain users on a
- UNIX system. The result is a great reduction in the administrative
- cost of running a mixed UNIX and NT network.</para>
-
-</sect1>
-
-</chapter>