diff options
Diffstat (limited to 'packaging/Mandrake')
| -rw-r--r-- | packaging/Mandrake/samba2.spec.tmpl~ | 1720 |
1 files changed, 0 insertions, 1720 deletions
diff --git a/packaging/Mandrake/samba2.spec.tmpl~ b/packaging/Mandrake/samba2.spec.tmpl~ deleted file mode 100644 index 616756a36f..0000000000 --- a/packaging/Mandrake/samba2.spec.tmpl~ +++ /dev/null @@ -1,1720 +0,0 @@ -%define pkg_name samba -%define ver 2.2.5 -%define rel 17mdk -%define vscanver 0.2.5c - -# Determine whether this is the system samba or not. -%define build_system 0 -%if %build_system -%define samba_major %{null} -%else -%define samba_major 3 -%global _iconsdir %{_datadir}/icons/ -%global _miconsdir %{_datadir}/icons/mini -%global _liconsdir %{_datadir}/icons/large -%global _menudir %{_libdir}/menu -#%%%%global __prefix /opt/samba%{samba_major} - -%global _mandir %{_datadir}/man -%endif - -# 2.2.4 and 1 replace by samba-team at release -%define pversion 3.0alpha20 -%define prelease 3 -# For testing this setup: -#%define pversion1 2.2.5 -#%define prelease1 %(date +%Y%m%d) - -#Check to see if p(version|release) has been replaced (1 if replaced) -%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) -%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) - -# We might have a prerelease: -%define have_pre %(echo %pversion|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}') -%if %have_pre -%define pre_ver %(perl -e '$name="%pversion"; print ($name =~ /(.*?)[a-z]/);') -%define pre_pre %(echo %pversion|sed -e 's/%pre_ver//g') -%endif - - -# Check to see if we are running a build from a tarball release from samba.org -# (%have_pversion) If so, disable vscan, unless explicitly requested -# (--with vscan). -%define build_vscan 1 -%if %have_pversion -%define build_vscan 0 -%{?_with_vscan: %define build_vscan 1} -%endif - -# We now do detection of the Mandrake release we are building on: -#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi) -#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi) -%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi) -%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi) -%define build_mdk83 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.3 ];then echo 1; else echo 0; fi) -%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi) -%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi) -%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi) -%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi) -%define build_non_default 0 - -# Default options -%define build_acl 1 -%define build_winbind 1 -%define build_wins 1 -%define build_ldap 1 -%define build_ads 1 - -# Set defaults for each version -%if %build_mdk91 -%endif - -%if %build_mdk90 -%endif - -%if %build_mdk83 -%endif - -%if %build_mdk82 -%endif - -%if %build_mdk81 -%define build_winbind 0 -%define build_wins 0 -%endif - -%if %build_mdk80 -%define build_acl 0 -%define build_winbind 0 -%define build_wins 0 -%endif - -%if %build_mdk72 -%define build_acl 0 -%define build_winbind 0 -%define build_wins 0 -%endif - -# Allow commandline option overrides (borrowed from Vince's qmail srpm): -# To use it, do rpm [-ba|--rebuild] --with 'xxx' -# Check if the rpm was built with the defaults, otherwise we inform the user -%define build_non_default 0 -%{?_with_acl: %{expand: %%define build_acl 1}} -%{?_with_acl: %{expand: %%define build_non_default 1}} -%{?_without_acl: %{expand: %%define build_acl 0}} -%{?_without_acl: %{expand: %%define build_non_default 1}} -%{?_with_winbind: %{expand: %%global build_winbind 1}} -%{?_with_winbind: %{expand: %%define build_non_default 1}} -%{?_without_winbind: %{expand: %%define build_winbind 0}} -%{?_without_winbind: %{expand: %%define build_non_default 1}} -%{?_with_wins: %{expand: %%global build_wins 1}} -%{?_with_wins: %{expand: %%define build_non_default 1}} -%{?_without_wins: %{expand: %%global build_wins 0}} -%{?_without_wins: %{expand: %%define build_non_default 1}} -%{?_with_ldap: %{expand: %%global build_ldap 1}} -%{?_with_ldap: %{expand: %%define build_non_default 1}} -%{?_without_ldap: %{expand: %%global build_ldap 0}} -%{?_without_ldap: %{expand: %%define build_non_default 1}} -%{?_with_ads: %{expand: %%define build_ads 1}} -%{?_with_ads: %{expand: %%define build_non_default 1}} -%{?_without_ads: %{expand: %%define build_ads 0}} -%{?_without_ads: %{expand: %%define build_non_default 1}} - -# As if that weren't enough, we're going to try building with antivirus -# support as an option also -%define build_fprot 0 -%define build_kaspersky 0 -%define build_mks 0 -%define build_openantivirus 0 -%define build_sophos 0 -%define build_symantec 0 -%define build_trend 0 -%if %build_vscan -%{?_with_fprot: %{expand: %%global build_fprot 1}} -%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}} -%{?_with_mks: %{expand: %%global build_mks 1}} -%{?_with_openav: %{expand: %%global build_openantivirus 1}} -%{?_with_sophos: %{expand: %%global build_sophos 1}} -%{?_with_symantec: %{expand: %%global build_symantec 1}} -%{?_with_trend: %{expand: %%global build_trend 1}} -%define vscandir "samba-vscan-%{vscanver}" -%endif -%define vfsdir "examples.bin/VFS" - -#Workaround missing macros in 8.x: -%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}} - -Summary: Samba SMB server. -Name: %{pkg_name}%{samba_major} -%if %have_pversion && %have_pre -Version: %{pre_ver} -%define source_ver %{pversion} -%endif -%if %have_pversion && !%have_pre -Version: %{pversion} -%define source_ver %{pversion} -%endif -%if !%have_pversion -Version: %{ver} -%define source_ver %{ver} -%endif -%if %have_prelease && !%have_pre -Release: 1.%{prelease}mdk -%endif -%if %have_prelease && %have_pre -Release: 0.%{pre_pre}.%{prelease}mdk -%endif -%if !%have_prelease -Release: %{rel} -%endif -License: GPL -Group: System/Servers -Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2 -URL: http://www.samba.org -Source1: samba.log -Source2: mount.smb -Source3: samba.xinetd -Source4: swat_48.xpm.bz2 -Source5: swat_32.xpm.bz2 -Source6: swat_16.xpm.bz2 -Source7: README.%{name}-mandrake-rpm -%if %build_vscan -Source8: samba-vscan-%{vscanver}.tar.bz2 -%endif -Source10: samba-print-pdf.sh.bz2 -Patch1: smbw.patch.bz2 -Patch2: samba-glibc21.patch.bz2 -#Patch3: network-recycle_bin.patch.bz2 -Patch5: samba-2.2.0-gawk.patch.bz2 -Patch12: samba-2.2.0-buildroot.patch.bz2 -#Patch16: samba-mkdir.patch.bz2 -Patch17: samba-3.0-smbmount-sbin.patch.bz2 -#Patches 20-22 to get packaging synced from 2.2.2 to 3.0 -Patch20: samba-3.0-smb.conf.patch.bz2 -Patch21: samba-3.0-winbind.init.patch.bz2 -Patch22: samba-3.0-system-auth-winbind.patch.bz2 -Patch23: samba-3alpha20-destdir.patch.bz2 -#Patch24: samba-3.0alpha13-installman.patch.bz2 -Patch25: samba-3.0alpha13-config_lang.patch.bz2 -#Patch 26 belongs with 20-22 -Patch26: samba-3.0-smb.init.patch.bz2 -Requires: pam >= 0.64, samba-common = %{version} -BuildRequires: pam-devel autoconf readline-devel -%if %build_acl -BuildRequires: libacl-devel -%endif -%if %build_mdk72 -BuildRequires: cups-devel -%else -BuildRequires: libcups-devel -%endif -%if %build_ldap -BuildRequires: libldap-devel -%endif -%if %build_ads -BuildRequires: libldap-devel krb5-devel -%endif -BuildRoot: %{_tmppath}/%{name}-root -Prefix: /usr -Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall -Prereq: fileutils sed /bin/grep - -%description -Samba provides an SMB server which can be used to provide -network services to SMB (sometimes called "Lan Manager") -clients, including various versions of MS Windows, OS/2, -and other Linux machines. Samba also provides some SMB -clients, which complement the built-in SMB filesystem -in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols -and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) -protocol. - -Samba-3.0 features working NT Domain Control capability and -includes the SWAT (Samba Web Administration Tool) that -allows samba's smb.conf file to be remotely managed using your -favourite web browser. For the time being this is being -enabled on TCP port 901 via xinetd. SWAT is now included in -it's own subpackage, samba-swat. - -Please refer to the WHATSNEW.txt document for fixup information. -This binary release includes encrypted password support. - -Please read the smb.conf file and ENCRYPTION.txt in the -docs directory for implementation details. - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%if %build_non_default -WARNING: This RPM was built with command-line options. Please -see README.%{name}-mandrake-rpm in the documentation for -more information. -%endif - -%package server -URL: http://www.samba.org -Summary: Samba (SMB) server programs. -Requires: %{name}-common = %{version} -Group: Networking/Other -Provides: samba -Obsoletes: samba -%if %build_system -Obsoletes: samba-server-ldap -Obsoletes: samba3-server -%else -Provides: samba-server -%endif - -%description server -Samba-server provides a SMB server which can be used to provide -network services to SMB (sometimes called "Lan Manager") -clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols -and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) -protocol. - -Samba-3.0 features working NT Domain Control capability and -includes the SWAT (Samba Web Administration Tool) that -allows samba's smb.conf file to be remotely managed using your -favourite web browser. For the time being this is being -enabled on TCP port 901 via xinetd. SWAT is now included in -it's own subpackage, samba-swat. - -Please refer to the WHATSNEW.txt document for fixup information. -This binary release includes encrypted password support. - -Please read the smb.conf file and ENCRYPTION.txt in the -docs directory for implementation details. - -%if %build_ldap -This package was compiled with LDAP support, which means that -passwords can be stored in LDAP or in smbpasswd files. -To migrate your passwords from smbpasswd into LDAP, try -examples/LDAP/import_smbpasswd.pl using: -%{_datadir}/%{name}/scripts/import_smbpasswd.pl </etc/%{name}/smbpasswd - -Scripts for managing users in LDAP have been added to -%{_datadir}/%{name}/scripts, configuration is in /etc/%{name}/smbldap_conf.pm -%endif - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%package client -URL: http://www.samba.org -Summary: Samba (SMB) client programs. -Group: Networking/Other -Requires: %{name}-common = %{version} -Obsoletes: smbfs -%if %build_system -Obsoletes: samba3-client -%else -Provides: samba-client -%endif - -%description client -Samba-client provides some SMB clients, which complement the built-in -SMB filesystem in Linux. These allow the accessing of SMB shares, and -printing to SMB printers. - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%package common -URL: http://www.samba.org -Summary: Files used by both Samba servers and clients. -Group: System/Servers -%if %build_system -Obsoletes: samba-common-ldap -Obsoletes: samba3-common -%else -Provides: samba-common -%endif - -%description common -Samba-common provides files necessary for both the server and client -packages of Samba. - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%package doc -URL: http://www.samba.org -Summary: Documentation for Samba servers and clients. -Group: System/Servers -Requires: %{name}-common = %{version} -%if %build_system -Obsoletes: samba3-doc -%else -Provides: samba-doc -%endif - -%description doc -Samba-doc provides documentation files for both the server and client -packages of Samba. - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%package swat -URL: http://www.samba.org -Summary: The Samba Web Administration Tool. -Requires: %{name}-server = %{version} -Requires: xinetd -Group: System/Servers -%if %build_system -Obsoletes: samba-swat-ldap -Obsoletes: samba3-swat -%else -Provides: samba-swat -%endif - -%description swat -SWAT (the Samba Web Administration Tool) allows samba's smb.conf file -to be remotely managed using your favourite web browser. For the time -being this is being enabled on TCP port 901 via xinetd. Note that -SWAT does not use SSL encryption, nor does it preserve comments in -your smb.conf file. Webmin uses SSL encryption by default, and -preserves comments in configuration files, even if it does not display -them, and is therefore the preferred method for remotely managing -Samba. - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%if %build_winbind -%package winbind -URL: http://www.samba.org -Summary: Samba-winbind daemon, utilities and documentation -Group: System/Servers -Requires: %{name}-common = %{version} -%description winbind -Provides the winbind daemon and testing tools to allow authentication -and group/user enumeration from a Windows or Samba domain controller. -%endif - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -%if %build_wins -%package -n nss_wins%{samba_major} -URL: http://www.samba.org -Summary: Name Service Switch service for WINS -Group: System/Servers -Requires: %{name}-common = %{version} -PreReq: glibc -%description -n nss_wins%{samba_major} -Provides the libnss_wins shared library which resolves NetBIOS names to -IP addresses. -%endif - -%if !%build_system -NOTE: This is a prerelease of samba-%{samba_major}, not intended -for production use. If something breaks, file a bug report. -%endif - -#Antivirus packages: -%if %build_fprot -%package vscan-fprot -Summary: On-access virus scanning for samba using FPROT -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-fprot -A vfs-module for samba to implement on-access scanning using the -FPROT antivirus software (which must be installed to use this). -%endif - -%if %build_kaspersky -%package vscan-kaspersky -Summary: On-access virus scanning for samba using Kaspersky -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-kaspersky -A vfs-module for samba to implement on-access scanning using the -Kaspersky antivirus software (which must be installed to use this). -%endif - -%if %build_mks -%package vscan-mks -Summary: On-access virus scanning for samba using MKS -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-mks -A vfs-module for samba to implement on-access scanning using the -MKS antivirus software (which must be installed to use this). -%endif - -%if %build_openantivirus -%package vscan-openantivirus -Summary: On-access virus scanning for samba using OpenAntivirus -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-openantivirus -A vfs-module for samba to implement on-access scanning using the -OpenAntivirus antivirus software (which must be installed to use this). -%endif - -%if %build_sophos -%package vscan-sophos -Summary: On-access virus scanning for samba using Sophos -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-sophos -A vfs-module for samba to implement on-access scanning using the -Sophos antivirus software (which must be installed to use this). -%endif - -%if %build_symantec -%package vscan-symantec -Summary: On-access virus scanning for samba using Symantec -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-symantec -A vfs-module for samba to implement on-access scanning using the -Symantec antivirus software (which must be installed to use this). -%endif - -%if %build_trend -%package vscan-trend -Summary: On-access virus scanning for samba using Trend -Group: System/Servers -Requires: %{name}-server = %{version} -Autoreq: 0 -%description vscan-trend -A vfs-module for samba to implement on-access scanning using the -Trend antivirus software (which must be installed to use this). -%endif - -%prep -# Build a summary of how this RPM was built: -%if %build_acl -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with acl" -%else -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without acl" -%endif -%if %build_winbind -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with winbind" -%else -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without winbind" -%endif -%if %build_wins -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with wins" -%else -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without wins" -%endif -%if %build_ldap -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ldap" -%else -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ldap" -%endif -%if %build_ads -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ads" -%else -RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ads" -%endif - -%if %build_non_default -echo "Building a non-default rpm with the following command-line arguments:" -echo "$RPM_EXTRA_OPTIONS" -echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7} -echo "an identical rpm, you need to supply the following options">>%{SOURCE7} -echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7} -echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} -%else -echo "This rpm was built with default options">%{SOURCE7} -echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} -%endif - -%if %build_vscan -%setup -q -a 8 -n %{pkg_name}-%{source_ver} -%else -%setup -q -n %{pkg_name}-%{source_ver} -%endif -#%patch111 -p1 -%patch1 -p1 -b .smbw -#%patch3 -p1 -b .net-r_bin -%patch5 -p1 -b .gawk -#%patch6 -p1 -%patch12 -p1 -b .buildroot -%patch17 -p1 -b .sbin -%patch20 -p1 -b .samba222 -%patch21 -p1 -b .samba222 -%patch22 -p1 -b .samba222 -%patch23 -p1 -b .destdir -#%patch24 -p1 -b .langen -%patch25 -p1 -b .multilang -%patch26 -p1 -b .samba222 -cp %{SOURCE7} . - -# Make a copy of examples so that we have a clean one for doc: -cp -a examples examples.bin - -%if %build_vscan -# put antivirus files in examples.bin/VFS/ -for av in fprot kaspersky mks openantivirus sophos symantec trend; do - cp -a %{vscandir}/$av %{vfsdir} -done -%endif - -# Edit some files when not building system samba: -%if !%build_system -perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c -%endif - -%build -#%serverbuild -(cd source -autoconf -CPPFLAGS="-I/usr/include/openssl"; export CPPFLAGS -CFLAGS="$RPM_OPT_FLAGS" -%configure --prefix=%{_prefix} \ - --with-fhs \ - --libdir=/etc/%{name} \ - --sysconfdir=/etc/%{name} \ - --localstatedir=/var \ - --with-configdir=/etc/%{name} \ - --with-codepagedir=/var/lib/%{name}/codepages \ - --with-privatedir=/etc/%{name} \ - --with-swatdir=%{_datadir}/swat%{samba_major} \ - --with-smbmount \ - --with-syslog \ - --with-automount \ - --with-pam \ - --with-vfs \ - --with-utmp \ - --with-msdfs \ - --with-smbwrapper \ - --with-manpages-langs=en \ - --with-logfilebase=/var/log/%{name} \ - --with-lockdir=/var/cache/%{name} \ - --with-piddir=/var/run/%{name} \ -%if !%build_system - --program-suffix=%{samba_major} \ -%endif -%if %build_acl - --with-acl-support \ -%endif -%if !%build_ldap - --with-ldap=no \ -%endif -%if !%build_ads - --with-ads=no \ -%endif - --with-quotas -# --with-pam_smbpass \ -# --with-manpages-langs=en,ja,pl \ - -#make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" all -make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" \ - all smbfilter smbwrapper smbcacls pam_smbpass nsswitch nsswitch/libnss_wins.so debug2html -# Build VFS modules (experimental) -cd ../%vfsdir -%configure --prefix=%{prefix} \ - --mandir=%{prefix}/share/man -make -#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \ -# -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" -) - -# Build mkntpasswd in examples/LDAP/ for smbldaptools -( -cd examples.bin/LDAP/smbldap-tools/mkntpwd -make -) - -# Build antivirus vfs objects: -%if %build_fprot -echo "Building fprot" -%endif -%if %build_kaspersky -echo "Building Kaspersky" -(cd %{vfsdir}/kaspersky;make) -%endif -%if %build_mks -echo "Building mks" -(cd %{vfsdir}/mks;make) -%endif -%if %build_openantivirus -echo "Building OpenAntivirus" -(cd %{vfsdir}/openantivirus;make) -%endif -%if %build_sophos -echo "building sophos" -(cd %{vfsdir}/sophos;make) -%endif -%if %build_symantec -echo "Building symantec" -(cd %{vfsdir}/symantec;make) -%endif -%if %build_trend -echo "Building Trend" -(cd %{vfsdir}/trend;make) -%endif - -%install -rm -rf $RPM_BUILD_ROOT -mkdir -p $RPM_BUILD_ROOT - -# Any entries here mean samba makefile is *really* broken: -mkdir -p $RPM_BUILD_ROOT/etc/%{name} -mkdir -p $RPM_BUILD_ROOT/%{_datadir} - -(cd source -make DESTDIR=$RPM_BUILD_ROOT install) - -#need to stay -mkdir -p $RPM_BUILD_ROOT/sbin -mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d} -mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d -mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} -mkdir -p $RPM_BUILD_ROOT/var/log/%{name} -mkdir -p $RPM_BUILD_ROOT/var/run/%{name} -mkdir -p $RPM_BUILD_ROOT/var/spool/%{name} -mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/{netlogon,profiles,printers} -mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC} -mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/codepages/src -mkdir -p $RPM_BUILD_ROOT/lib/security -mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib -mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs -mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts - -#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build -install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so -#install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security/pam_smbpass.so -install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/lib/security/pam_winbind%{samba_major}.so - -# Install VFS modules -#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs -#for i in block recycle -#do -# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs -#done - -# Antivirus support: -# mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan - for av in fprotd kavp mksd oav sophos symantec trend; do - if [ -d %{vfsdir}/$av -a -e %{vfsdir}/$av/vscan-$av.so ];then - cp %{vfsdir}/$av/vscan-$av.so \ - $RPM_BUILD_ROOT%{_libdir}/samba/vfs/ - fi - done - -#These scripts are not handled by make: -#for i in addtosmbpass mksmbpasswd.sh smbtar convert_smbpasswd -for i in addtosmbpass mksmbpasswd.sh convert_smbpasswd -do - install -m755 source/script/$i $RPM_BUILD_ROOT/%{_bindir} -done - -#libnss_* not handled by make: -# Install the nsswitch library extension file -for i in wins winbind; do - install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/lib/libnss_${i}%{samba_major}.so -done -# Make link for wins and winbind resolvers -( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2) - -# Install other stuff - -# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/ - install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf - install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers - install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} - #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin - install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} - install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major} - install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} - install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major} - install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major} - install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name} - install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} -# - install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/%{name} -# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include - -# Install smbldap-tools scripts: -#for i in examples/LDAP/smbldap-tools/*.pl; do -# install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ -#done - -#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ - -# The conf file -#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name} - -# Link both smbldap*.pm into vendor-perl (any better ideas?) -#mkdir -p %{buildroot}/%{perl_vendorlib} -#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib} -#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib} - -#mkntpwd -#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir} - -# Samba smbpasswd migration script: -install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ -install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ - - - -# make a conf file for winbind from the default one: - cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf - install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf - -# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs -#I don't think it's possible for make to do this ... - ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smb%{samba_major} - ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smbfs%{samba_major} - echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts - -# Link smbspool to CUPS (does not require installed CUPS) - - mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend - ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major} - -# xinetd support - - mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d - install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} - -# menu support - -mkdir -p $RPM_BUILD_ROOT%{_menudir} -cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF -?package(%{name}):command="gnome-moz-remote http://localhost:901/" needs="gnome" \ -icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \ -longtitle="The Swat Samba Administration Tool" -?package(%{name}):command="sh -c '\$BROWSER http://localhost:901/'" needs="x11" \ -icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \ -longtitle="The Swat Samba Administration Tool" -EOF - -mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir} - -bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.xpm -bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.xpm -bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.xpm - -bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf - -# Fix configs when not building system samba: -%if !%build_system -# Work around non-existent but claimed --program-suffix support :-( -for dir in %{_sbindir} %{_bindir};do - FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$` - for OLD in $FILES; do - NEW=`echo ${OLD}%{samba_major}` - mv $OLD $NEW - done -done -# And the man pages too: -FILES=`find %{buildroot}%{_mandir} -type f ` -for OLD in $FILES; do - BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'` - EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` - NEW=`echo ${BASE}%{samba_major}${EXT}` - mv $OLD $NEW -done -# Replace paths in config files and init scripts: -for i in smb winbind;do - perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major} -done -for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major}; do - perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g' $RPM_BUILD_ROOT/$i; -done -# Fix pam files -perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} -# Fix xinetd file for swat: -perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} -%endif - -%clean -rm -rf $RPM_BUILD_ROOT - -%post server - -/sbin/chkconfig --level 35 smb%{samba_major} on - -# Add a unix group for samba machine accounts -groupadd -frg 421 machines - -# Migrate tdb's from /var/lock/samba (taken from official samba spec file): -for i in /var/lock/samba/*.tdb -do -if [ -f $i ]; then - newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'` - echo "Moving $i to $newname" - mv $i $newname -fi -done - -# Remove the transient tdb files (modified from version in off. samba spec: -for TDB in brlock unexpected locking messages; do - if [ -e /var/cache/%{name}/$TDB.tdb ]; then - rm -f /var/cache/%{name}/$TDB.tdb; - fi; -done - -if [ -d /var/lock/samba ]; then - rm -rf /var/lock/samba -fi - -%post common -# Basic migration script for pre-2.2.1 users, -# since smb config moved from /etc to /etc/samba - -# Let's create a proper /etc/samba/smbpasswd file -[ -f /etc/%{name}/smbpasswd ] || { - echo "Creating password file for samba..." - touch /etc/%{name}/smbpasswd -} - -# And this too, in case we don't have smbd to create it for us -[ -f /var/cache/%{name}/unexpected.tdb ] || { - touch /var/cache/%{name}/unexpected.tdb -} - -# Let's define the proper paths for config files -perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf - -# Fix the logrotate.d file from smb and nmb to smbd and nmbd -if [ -f /etc/logrotate.d/samba ]; then - perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba - perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba -fi - -# And not loose our machine account SID -[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||: - -%if %build_winbind -%post winbind -if [ $1 = 1 ]; then - /sbin/chkconfig winbind%{samba_major} on - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp - for i in passwd group;do - grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null - if [ $? = 0 ];then - echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf" - awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf; - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp - else - echo "$i entry found in /etc/nsswitch.conf" - fi - done - if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi -fi - -%preun winbind -if [ $1 = 0 ]; then - echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf" - perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf - - /sbin/chkconfig winbind%{samba_major} reset -fi -%endif %build_winbind - -%if %build_wins -%post -n nss_wins%{samba_major} -if [ $1 = 1 ]; then - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave - grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null - if [ $? = 0 ];then - echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf" - awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf; - else - echo "wins entry found in /etc/nsswitch.conf" - fi -# else -# echo "Upgrade, leaving nsswitch.conf intact" -fi - -%preun -n nss_wins%{samba_major} -if [ $1 = 0 ]; then - echo "Removing wins entry from /etc/nsswitch.conf" - perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf -#else -# echo "Leaving /etc/nsswitch.conf intact" -fi -%endif %build_wins - -%preun - -/sbin/chkconfig --level 35 smb%{samba_major} reset - -if [ $1 = 0 ] ; then -%_preun_service smb%{samba_major} -# /sbin/chkconfig --level 35 smb reset -# Let's not loose /var/cache/samba - -# for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \ -#locking.tdb messages.tdb;do -# if [ -e /var/cache/samba/$i ]; then -# mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK -# fi; -# done - if [ -d /var/log/%{name} ]; then - rm -rf /var/log/%{name}/* - fi - if [ -d /var/cache/%{name} ]; then - mv -f /var/cache/%{name} /var/cache/%{name}.BAK - fi -fi - -%post swat -if [ -f /var/lock/subsys/xinetd ]; then - service xinetd reload >/dev/null 2>&1 || : -fi -%update_menus - -%postun swat - -# Remove swat entry from xinetd -if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then -rm -f /etc/xinetd.d/swat%{samba_major} - service xinetd reload &>/dev/null || : -fi - -if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi - -%clean_menus - -%triggerpostun -- samba < 1.9.18p7 - -if [ $1 != 0 ]; then - /sbin/chkconfig --level 35 smb on -fi - -%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0 - -if [ $1 != 0 ]; then - [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||: - [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||: - [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||: -fi - -%files server -%defattr(-,root,root) -#%attr(-,root,root) /sbin/* -%{_sbindir}/%{name} -%{_sbindir}/smbd%{samba_major} -%{_sbindir}/nmbd%{samba_major} -#%{_sbindir}/smbcontrol -#%{_sbindir}/mkntpwd -#%{prefix}/bin/addtosmbpass -%{_bindir}/mksmbpasswd.sh -%{_bindir}/smbstatus%{samba_major} -%{_bindir}/convert_smbpasswd%{samba_major} -%{_bindir}/pdbedit%{samba_major} -%{_bindir}/smbgroupedit%{samba_major} -#%attr(755,root,root) /lib/security/pam_smbpass* -#/usr/share/swat -%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers -%attr(-,root,root) %config /etc/rc.d/init.d/smb%{samba_major} -%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name} -%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name} -#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include -%{_mandir}/man1/smbstatus*.1* -%{_mandir}/man5/smbpasswd*.5* -%{_mandir}/man7/samba*.7* -%{_mandir}/man8/smbd*.8* -%{_mandir}/man8/nmbd*.8* -%{_mandir}/man1/smbcontrol*.1* -%{_mandir}/man5/lmhosts*.5* -%{_mandir}/man5/smb.conf*.5* -%attr(775,root,root) %dir /var/lib/%{name}/netlogon -%attr(775,root,root) %dir /var/lib/%{name}/profiles -%attr(775,root,root) %dir /var/lib/%{name}/printers/* -%dir /var/cache/%{name} -%dir /var/log/%{name} -%attr(1777,root,root) %dir /var/spool/%{name} -%dir %{_datadir}/%{name}/scripts -#%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf -#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl -#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm -#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm -#%{perl_vendorlib}/*.pm -%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl - - -%files doc -%defattr(-,root,root) -%doc README COPYING Manifest Read-Manifest-Now -%doc WHATSNEW.txt Roadmap -%doc README.%{name}-mandrake-rpm -%doc docs -%doc examples -%doc swat/README -%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/* - -%files swat -%defattr(-,root,root) -%config(noreplace) /etc/xinetd.d/swat%{samba_major} -#%attr(-,root,root) /sbin/* -%{_sbindir}/swat%{samba_major} -%{_menudir}/%{name} -%{_miconsdir}/*.xpm -%{_liconsdir}/*.xpm -%{_iconsdir}/*.xpm -%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/* -%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/* -%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/* -%{_mandir}/man8/swat*.8* - -%files client -%defattr(-,root,root) -%ifnarch alpha -/sbin/mount.smb%{samba_major} -/sbin/mount.smbfs%{samba_major} -%attr(755,root,root) %{_bindir}/smbmount%{samba_major} -%attr(4755,root,root) %{_bindir}/smbumount%{samba_major} -#%attr(4755,root,root) %{_sbindir}/smbmnt -%{_mandir}/man8/smbmnt*.8* -%{_mandir}/man8/smbmount*.8* -%{_mandir}/man8/smbumount*.8* -%endif -%{_bindir}/nmblookup%{samba_major} -%{_bindir}/findsmb%{samba_major} -%{_bindir}/smbclient%{samba_major} -%{_bindir}/smbprint%{samba_major} -%{_bindir}/smbtar%{samba_major} -%{_bindir}/smbspool%{samba_major} -# Link of smbspool to CUPS -/%{_libdir}/cups/backend/smb%{samba_major} -/%{_mandir}/man1/nmblookup*.1* -/%{_mandir}/man1/findsmb*.1* -/%{_mandir}/man1/smbclient*.1* -/%{_mandir}/man1/smbtar*.1* - -%files common -%defattr(-,root,root) -%dir /var/cache/%{name} -%dir /var/log/%{name} -%dir /var/run/%{name} -#%{_bindir}/make_smbcodepage -#%{_bindir}/make_unicodemap -%{_bindir}/testparm%{samba_major} -%{_bindir}/testprns%{samba_major} -#%{_bindir}/make_printerdef -%{_bindir}/rpcclient%{samba_major} -%{_bindir}/smbsh%{samba_major} -%{_bindir}/smbpasswd%{samba_major} -%{_bindir}/net%{samba_major} -%{_bindir}/smbtree%{samba_major} -%{_libdir}/smbwrapper%{samba_major}.so -%attr(-,root,root) %config(noreplace) /etc/%{name}/smb.conf -%attr(-,root,root) %config(noreplace) /etc/%{name}/smb-winbind.conf -%attr(-,root,root) %config(noreplace) /etc/%{name}/lmhosts -%attr(-,root,root) /var/lib/%{name}/codepages -%{_mandir}/man1/make_smbcodepage*.1* -%{_mandir}/man1/make_unicodemap*.1* -%{_mandir}/man1/testparm*.1* -%{_mandir}/man1/smbsh*.1* -%{_mandir}/man1/testprns*.1* -%{_mandir}/man5/smb.conf*.5* -%{_mandir}/man5/lmhosts*.5* -%{_mandir}/man8/smbpasswd*.8* -/%{_mandir}/man1/smbcacls*.1* - -%if %build_winbind -%files winbind -%defattr(-,root,root) -%{_sbindir}/winbindd%{samba_major} -%{_bindir}/wbinfo%{samba_major} -%attr(755,root,root) /lib/security/pam_winbind* -%attr(755,root,root) /lib/libnss_winbind%{samba_major}* -%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major} -%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind* -%{_mandir}/man8/winbindd*.8* -%{_mandir}/man1/wbinfo*.1* -%endif - -%if %build_wins -%files -n nss_wins%{samba_major} -%defattr(-,root,root) -%attr(755,root,root) /lib/libnss_wins%{samba_major}.so* -%endif - -#Files for antivirus support: -%if %build_fprot -%files vscan-fprot -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-fprotd.so -%doc examples.bin/VFS/fprot/INSTALL -%endif - -%if %build_kaspersky -%files vscan-kaspersky -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-kavp.so -%doc examples.bin/VFS/kaspersky/INSTALL -%endif - -%if %build_mks -%files vscan-mks -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-mksd.so -%doc examples.bin/VFS/mks/INSTALL -%endif - -%if %build_openantivirus -%files vscan-openantivirus -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-oav.so -%doc examples.bin/VFS/openantivirus/INSTALL -%endif - -%if %build_sophos -%files vscan-sophos -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-sophos.so -%doc examples.bin/VFS/sophos/INSTALL -%endif - -%if %build_symantec -%files vscan-symantec -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-symantec.so -%doc examples.bin/VFS/symantec/INSTALL -%endif - -%if %build_trend -%files vscan-trend -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-trend.so -%doc examples.bin/VFS/trend/INSTALL -%endif - -%changelog -* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk -- Fix mount.smbfs3 pointing to smbmount not in package -- Remove unnecessary lines from install (now done by make) -- Build with ldap and ads on all releases by default -- Put av-stuff back - -* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk -- When not building as system samba, avoid conflicting with system samba -- Macro-ize as much as possible for above (aka finish cleanups) -- Fix paths in init scripts and logrotate and xinetd -- Fix provides and obsoletes so as to provide samba, but not obsolete - current stable until we have a stable release (when it's the system samba). -- Add warnings to descriptions when not system samba. -- This is now parallel installable with the normal samba release, for easy - testing. It shouldn't touch existing installations. Of course, only - one samba at a time on the same interface! - -* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk -- Merge with 2.2.6pre2.2mdk -- Detect alpha- and beta-, along with pre-releases - -* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk -- Sync with 2.2.3-2mdk (new --without options, detect when - building for a different distribution. - -* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk -- Sync with 2.2.2-10mdk, which added build-time options --with ldap, - winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added - warning in description if built with these options. - -* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk -- Added %%if's for build_ads, which hopefully will add Active Directory - Support (by request). - -* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk -- More syncing with 2.2 rpm (post and postun scripts) -- Testing without ldap - -* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk -- 3.0-alpha13 -- Fixed installman.sh patch. - -* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk -- Fixed %post and %preun for nss_wins, added %post and %preun for - samba-winbind (chkconfig and winbind entries in nsswitch.conf) - -* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk -- 3.0-alpha12 -- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2 -- Added new subpackage for swat -- More %if's for ldap. - -* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk -- 3.0-alpha11 - -* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk -- 3.0-alpha10 - -* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk -- 3.0-alpha9 - -* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk -- Added net command to %files common, pdbedit and smbgroupedit to - %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup). - Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches) - -* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk -- Patch for installman.sh to handle lang=en correctly (p24) -- added --with-manpages-langs=en,ja,pl (translated manpages), but there - aren't any manpages for these languages yet ... so we still - need %dir and %doc entries for them ... -- patch (p25) to configure.in to support more than 2 languages. -- addtosmbpass seems to have returned for now, but make_* have disappeared! - -* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk -- DESTDIR patch for Makefile.in (p23), remove a lot of %install scripts - this forces move of smbcontrol and smbmnt to %{prefix}/bin - removed --with-pam_smbpass as it doesn't compile. - -* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk -- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!) -- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch - (applied upstream), removed ook-patch (codepage directory totally different). -- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 - should be applied upstream before 3.0 ships ... - -* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk -- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck). -- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy). - -* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk -- Had to remove the network recycle bin patch: it seems to mess up - file deletion from windows (files appear to be "already in use") - -* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk -- added network recycle bin patch: - <http://www.amherst.edu/~bbstone/howto/samba.html> -- added "recycle bin = .recycled" parameter in smb.conf [homes]. -- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o) - -* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk -- added %build 8.0 and 7.2, for tweakers to play around. -- changed configure options: - . removed --with-mmap, --with-netatalk (obsolete). - . added --with-msdfs, --with-vfs (seems stable, but still need testing). - -* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk -- rebuilt with winbind and nss_wins enabled. - -* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk -- Rebuilt on cooker. - -* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk -- Patch for smb.conf to fix incorrect lpq command, typo in winbind, - and add sample linpopup command. Added print driver directories. -- New XFS quota patch (untested!, samba runs, but do quotas work? We - can't check yet since the kernel doesn't seem to support XFS quotas!) - -* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk -- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne - Who did a tremendous integration work on 2.2.2. - Rebuild on cooker, please test XFS (ACLs and quotas) again... - -* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk -- Samba-2.2.2. released! Use %defines to determine which subpackages - are built and which Mandrake release we are buiding on/for (hint: define - build_mdk81 1 for Mandrake 8.1 updates) - -* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk -- %post and %postun for nss_wins - -* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk -- New CVS snapshot, /etc/pam.d/system-auth-winbind added - with configuration to allow easy winbind setup. - -* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk -- Added new package nss_wins and moved smbpasswd to common (required by - winbind). - -* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk -- Added new package winbind. - -* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk -- Removed patch to smb init.d file (applied in cvs) - -* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk -- Added winbind init script, which still needs to check for running nmbd. - -* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk -- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and - pam_winbind, moved pam_smbpass from samba-common to samba. We still - need a start-up script for winbind, or need to modify existing one. - -* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk -- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou) - Added smbd patch to support XFS quota (Nathan Scott) - -* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk -- Oops! smbpasswd created in wrong directory... - -* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk -- Removed a wrong comment in smb.conf. - Added creation of smbpasswd during install. - -* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk -- really less verbose %%post - -* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk -- Fix shared libs in /usr/bin silliness. - -* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk -- less verbose %%post - -* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk -- Added smbcacls (missing in %files), modification to smb.conf: ([printers] - is still needed, even with point-and-print!, user add script should - use name and not gid, since we may not get the gid . New script for - putting manpages in place (still need to be added in %files!). Moved - smbcontrol to sbin and added it and its man page to %files. - -* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk -- cleanup /var/lib/samba/codepage/src - -* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk -- moved codepage generation to %install and codepage dir to /var/lib/samba - -* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk -- /lib/* was in both samba and samba-common - Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember - when Samba was under the Megabyte..." - -* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk -- Added "the gc touch" to smbinit through the use of killall -0 instead of - grep cupsd | grep -v grep (too many greps :o) - -* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk -- BuildRequires: libcups-devel -- Removed BuildRequires: openssl-devel - -* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk -- replace chkconfig --add/del with --level 35 on/reset. - -* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk -- Replace discription s/inetd/xinetd/, we all love xinetd, blah. - -* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk -- Bugfix release. Fixed add user script, added print$ share and printer admin - We need to test interaction of new print support with CUPS, but printer - driver uploads should work. - -* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk -- fixed smb.conf a bit, rebuilt on cooker. - -* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk -- Finally, samba 2.2.1 has actually been release. At least we were ready! - Cleaned up smb.conf, and added some useful entries for domain controlling. - Migrated changes made in samba's samba2.spec for 2.2.1 to this file. - Added groupadd command in post to create a group for samba machine accounts. - (We should still check the postun, samba removes pam, logs and cache) - -* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk -- fixed smbwrapper compile options. - -* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk -- added LFS support. - added smbwrapper support (smbsh) - -* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk -- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location - of smbmount (/usr/bin/smbmount) - -* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk -- smbmount and smbumount are now in /usr/bin and SUID. - added ||: to triggerpostun son you don't get error 1 anymore when rpm -e - Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)! - -* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk -- s/Copyright/License/; -- Stop Sylvester from pretending .gz source to be .bz2 source via filename - aka really bzip2 the source. - -* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk -- changed Till's startup script modifications: now samba is being reloaded - automatically 1 minute after it has started (same reasons as below in 9mdk) - added _post_ and _preun_ for service smb - fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing) - -* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk -- Modified the Samba startup script so that in case of CUPS being used as - printing system Samba only starts when the CUPS daemon is ready to accept - requests. Otherwise the CUPS queues would not appear as Samba shares. - -* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk -- patched smbmount.c to have it call smbmnt in sbin (thanks Seb). - -* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk -- put SWAT menu icons back in place. - -* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk -- OOPS! fixed smbmount symlinks - -* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk -- removed inetd postun script, replaced with xinetd. - updated binary list (smbcacls...) - cleaned samba.spec - -* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk -- Changed configure options to point to correct log and codepage directories, - added crude script to fix logrotate file for new log file names, updated - patches to work with current CVS. - -* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk -- Cleaned and updated the %files section. - -* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk -- Moved all samba files from /etc to /etc/samba (Thanks DomS!). - Fixed fixinit patch (/etc/samba/smb.conf) - -* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk -- Now use packaging/Mandrake/smb.conf, removed unused and obsolete - patches, moved netlogon and profile shares to /var/lib/samba in the - smb.conf to match the spec file. Added configuration for ntlogon to - smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed - symlink I introduced in 2.2.0-1mdk - -* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk -- Added more configure options. Changed Description field (thx John T). - -* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk -- moved netlogon and profiles to /var/lib/samba by popular demand ;o) - -* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk -- moved netlogon and profiles back to /home. - -* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk -- fixed post inetd/xinetd script& - -* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk -- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware - nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches - to take. smbadduser and addtosmbpass seem to have disappeared. Moved - all Mandrake-specific files to packaging/Mandrake and made patches - from those shipped with samba. Moved netlogon to /home/samba and added - /home/samba/profiles. Added winbind,smbfilter and debug2html to make command. - -* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk -- Fix menu entry and provide separate menu entry for GNOME - (nautilus doesn't support HTTP authentication yet) -- Add icons in package - -* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk -- use new server macros - -* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk -- check whether /etc/inetd.conf exists (upgrade) or not (fresh install). - -* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk -- spec cosmetics, added '-r' option to lpr-cups command line so files are - removed from /var/spool/samba after printing. - -* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk -- merged last rh patches. - -* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk -- removed dependencies on cups and cups-devel so one can install samba without using cups -- added /home/netlogon - -* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk -- Changed default print command in /etc/smb.conf, so that the Windows - driver of the printer has to be used on the client. -- Fixed bug in smbspool which prevented from printing from a - Linux-Samba-CUPS client to a Windows server through the guest account. - -* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk -- Moved "smbspool" (Samba client of CUPS) to the samba-client package - -* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk -- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes - quota related compile problems on the alpha. - -* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk -- Fixed 'guest ok = ok' flag in smb.conf - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk -- Allowed guest account to print in smb.conf -- added swat icon in menu - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk -- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2 - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk -- Changed fixinit patch. -- Changed smb.conf for better CUPS configuration. -- Thanks Fred for doing this ---vvv. - -* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk -- menu entry for web configuration tool. -- merge with rh: xinetd + ssl + pam_stack. -- Added smbadduser rh-bugfix w/o relocation of config-files. - -* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk -- added build requires on cups-devel and pam-devel. - -* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk -- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was - wrong. - -* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk -- Cosmetic changes to make rpmlint more happy - -* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk -- added linkage to the using_samba book in swat - -* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk -- Added CUPS support to smb.conf -- Added internationalization options to smb.conf [Global] - -* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk -- Put "smbspool" to the files to install - -* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk -- Did some cleaning in the patches - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk -- relocated man pages from /usr/man to /usr/share/man for compatibility reasons - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk -- added make_unicodemap and build of unicode_map.$i in the spec file - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk -- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug. - -* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk -- 2.0.7 - -* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk - -- Titi sucks, does not put versions in changelog -- Fixed groups for -common and -client -- /usr/sbin/samba is no config file - -* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> -- fix buggy post install script (pixel) - -* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk - -- Changed group according to 7.1 specs -- Some spec file changes -- Let spec-helper do its job - -* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- 2.0.6. - -* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- Merge with rh changes. -- Split in 3 packages. - -* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> -- corrected a bug with %post (the $1 parameter is "1" in case of - a first install, not "0". That parameter is the number of packages - of the same name that will exist after running all the steps if nothing - is removed; so it is "1" after first isntall, "2" for a second install - or an upgrade, and "0" for a removal) - -* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> -- made smbmnt and smbumount suid root, and only executable by group 'smb' - add to 'smb' group any user that should be allowed to mount/unmount - SMB shared directories - -* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- 2.0.5a (bug security fix). - -* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com> -- 2.0.5 -- cs/da/de/fi/fr/it/tr descriptions/summaries - -* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com> -- 2.0.4b -- recompile on a system that works ;) - -* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- Mandrake adaptations. -- Bzip2 man-pages. - -* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com> -- add a mount.smb to make smb mounting a little easier. -- smb filesystems apparently do not work on alpha. Oops. - -* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com> -- always create codepages - -* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com> -- logrotate changes - -* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com> -- auto rebuild in the new build environment (release 3) - -* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com> -- updated init script to use graceful restart (not stop/start) - -* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.3 - -* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.2 - -* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com> -- swat swat - -* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com> -- fix bash2 breakage in post script - -* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.0 - -* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com> -- make sure all binaries are stripped - -* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com> -- update to 1.9.18p10. -- fix %triggerpostun. - -* Tue Jul 07 1998 Erik Troan <ewt@redhat.com> -- updated postun triggerscript to check $0 -- clear /etc/codepages from %preun instead of %postun - -* Mon Jun 08 1998 Erik Troan <ewt@redhat.com> -- made the %postun script a tad less agressive; no reason to remove - the logs or lock file (after all, if the lock file is still there, - samba is still running) -- the %postun and %preun should only exectute if this is the final - removal -- migrated %triggerpostun from Red Hat's samba package to work around - packaging problems in some Red Hat samba releases - -* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au> -- minor tidy up in preparation for release of 1.9.18p5 -- added findsmb utility from SGI package - -* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au> -- Updated version and codepage info. -- Release to test name resolve order - -* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au> -- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com> -- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb -- Compounded make line -- Updated smb.init restart mechanism -- Use compound mkdir -p line instead of individual calls to mkdir -- Fixed smb.conf file path for log files -- Fixed smb.conf file path for incoming smb print spool directory -- Added a number of options to smb.conf file -- Added smbadduser command (missed from all previous RPMs) - Doooh! -- Added smbuser file and smb.conf file updates for username map |