diff options
Diffstat (limited to 'packaging/Debian')
277 files changed, 16 insertions, 30924 deletions
diff --git a/packaging/Debian/README b/packaging/Debian/README index 865794c5b9..6ac20abb8b 100644 --- a/packaging/Debian/README +++ b/packaging/Debian/README @@ -1,78 +1,23 @@ -Building Samba Packages for Debian GNU/Linux --------------------------------------------- +Debian.org packages +------------------- -Building Debian packages is not as hard as some people might think. -The following instructions will allow you to build your own Samba -Debian packages. These instructions and the files in packaging/Debian/ -should be current as of Samba 3.0.2, and allow you to build Debian -packages for Debian unstable (so you need some development packages -available only in Debian unstable.) If you are using something newer -than 3.0.2 you might want to try to follow the instructions to see if -patches apply cleanly. If some patches don't apply cleanly please e-mail -samba@packages.debian.org since we might have fixed patches that we have -not yet integrated into upstream Samba. +Samba is packaged for Debian and Debian-derived distributions by the Debian +Samba packaging team. -We try to maintain as much compatibility with previous releases -of Debian as possible, so it is possible that the files in -packaging/Debian/ can also be used to build Samba Debian packages for -other Debian releases. However, sometimes this is just not possible -because we need to use stuff that is only available on Debian unstable. +The current sources for the packages in unstable can be found in Subversion +at: -Instructions ------------- + svn://svn.debian.org/pkg-samba/trunk/samba -If you want to build Samba packages for Debian and you just want to use -upstream sources, i.e. you don't want to wait for us to put official -packages out, or you want packages for a Debian version for which we -don't provide deb's, or you don't want to use official packages, or -you want to add --this-cool-switch to configure, or whatever, follow -these instructions: +The current sources for particular Debian releases as well as the +"experimental" branch can be found at: -0) Make sure you have the following packages installed (in addition -to the normal Debian development packages -- dpkg-dev, libc6-dev, -devscripts, etc.): + svn://svn.debian.org/pkg-samba/branches/<name>/samba - autoconf - debhelper (>= 4.1.13) - libpam0g-dev - libreadline4-dev - libcupsys2-dev - libacl1-dev, libacl1 (>= 2.2.11-1) - libkrb5-dev - libldap2-dev - po-debconf - python2.3-dev - - Notes regarding the packages required to build Samba Debian packages: - - * The libcupsys2-dev is not available in Debian Potato (Debian 2.2). - That's fine; the configure script won't detect CUPS support and the - resulting binaries won't support CUPS. - - * The list above is current as of samba-3.0.0rc2, but it can get - out of date. The best way to check what packages are required to - build the samba packages on Debian is to look for the Build-Depends: - field in the file debian/control. - -1) cd samba[-<version>]. For example, "cd samba-3.0.2". -2) cp -a packaging/Debian/debian/ . - It's important that you copy instead of symlink because the build - tools in Potato have a problem that prevents the build to work with - a symlink. If you are running a recent Debian distribution you don't - have to copy the directory and you can use a symlink instead: - "ln -s packaging/Debian/debian/ ." -3) dch -i (this is completely optional - only do it if you understand - Debian version numbers! Don't complain later if you can't upgrade - to official versions of the Samba packages for Debian.) - - Edit the changelog and make sure the version is right. For example, - for Samba 3.0.2, the version number should something like 3.0.2-0.1. -4) Run 'fakeroot debian/rules binary'. -5) That's it. Your new packages should be in ../. Install with dpkg. - -Please e-mail pkg-samba-maint@lists.debian.org with comments, questions or -suggestions. Please talk to us and not to the Samba Team. They have -better things to do and know nothing about the Debian packaging system. - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> +SerNet packages +--------------- +SerNet provides Debian packages of the latest Samba versions for various +Debian releases as part of EnterpriseSamba. See +http://www.enterprisesamba.org/index.php?id=56 for more information about the +packages and how to install them. diff --git a/packaging/Debian/debian-sarge/README.build b/packaging/Debian/debian-sarge/README.build deleted file mode 100644 index 0a11a1f6ea..0000000000 --- a/packaging/Debian/debian-sarge/README.build +++ /dev/null @@ -1,397 +0,0 @@ -From: Steve Langasek <vorlon@netexpress.net> -To: "Eloy A. Paris" <eloy.paris@usa.net> -Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT) -Subject: Re: autobuilder failure on arm for samba-2.2.1a-3 -In-Reply-To: <20010823100906.A1092@antenas> -Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net> -MIME-Version: 1.0 -Content-Type: TEXT/PLAIN; charset=US-ASCII - -On Thu, 23 Aug 2001, Eloy A. Paris wrote: - -> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote: - -> > Hmm. Maybe the thing to do is to focus on getting config.cache (not log, -> > cache) support into the package. Issues like this are frequent enough with -> > Samba, and the configure tests add enough time to the build process, that I -> > think there'd be much benefit in being able to step past a lot of these. - -> Uhhmmm... I don't know, I guess I don't like much the idea of -> maintaining a config.cache. It looks like extra work plus a -> compilation process that is "synthetic" or atificial. What happens if -> the Samba Team adds a new test, or modifies the configure script, will -> the config.cache pick those up? - -> In any case, you are the expert, so if you think that's the way to go, -> and the burden far exceeds the problems we have right now I say let's -> go for it. I am not well versed on autoconf and the configure process, -> that's all... - -Well, I'll attach my work to the bottom of this message and let you judge it -for yourself. - -The config.cache I'm trying to generate here is not equivalent to what -a configure script outputs. The only values I'm including are those which 1) -are no-brainers on any glibc-based platform, 2) are questions we need to force -a particular value for regardless of the kernel being built against, or 3) are -questions about specific bizarre features of proprietary Unices that we'll -always get an answer of 'no' to. - -I've removed all of the config.cache variables related to headers, or to -checks for particular libraries; I think it's pretty safe to assert that glibc -provides basic C functions like select(), setenv(), and waitpid() on all our -build targets, but I think it's less safe to assert that they'll always be -provided by particular header files. - -So the config.cache won't automatically be updated with answers to new -configure tests, but it also doesn't need to in order to be useful. There's -really only a handful of variables in there that we /need/ in order to -guarantee correctly-built packages, and if you want to leave out everything -else, that's perfectly ok too. Everything from the fifth stanza on down is -just a build-time speed-up for some of the slower architectures. Well, it -also has the fringe benefit that the packages will FAIL to build if someone -tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture. I -see that as a plus :), you may disagree, but in any case my next trick would -be to add a global variable developers can set to bypass the provided -config.cache. - - -It is a little artificial, but the whole point of .debs is to be able to build -binaries in a controlled environment. Right now, we don't really have control -over what happens in the autobuilders. We have even /less/ control over what -happens in a stable release: it's been two weeks now since I built binaries -for bug #94380, and they haven't been uploaded to security.d.o yet. I'm -guessing they won't be uploaded until Wichert is back from vacation, either -- -which is fine, but it would be nice if we didn't have to worry about -mis-builds by the security team, or about putting the security team to extra -trouble after the fact to get packages fixed. - -With a pre-loaded config.cache, we can ensure that bugs of this kind don't -happen in woody. We can take the arm autobuilder problem into our own hands, -and not have to worry about quirkiness in the build environment. We can even -close bug #109773, since we no longer have to worry about detecting the -setuid() routines. - - -So to me, it definitely seems worth it. But you're the maintainer, and I -won't ask you to put anything in the package that you're not comfortable with. - - -> By the way, I think I remember someone was able to build 2.2.x succesfully on -> the ARM. If this is the case, could it be that there's something weird -> with Phillip's setup? - -It could be. There are arm packages for 2.2.1a-1, so at /some/ point the -autobuilder was able to pass the locking test. - - -> P.S. How did you know about the ARM build problems? I don't see any -> bugs about this... - -<http://ftp-master.debian.org/testing/>, follow the links for samba... The -exact reference for the arm autobuilder is at -<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>. - -Regards, -Steve Langasek -postmodern programmer - - -diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog ---- samba-2.2.1a-bak/debian/changelog Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/changelog Thu Aug 23 10:28:08 2001 -@@ -1,3 +1,12 @@ -+samba (2.2.1a-4.1) unstable; urgency=low -+ -+ * Fix up the build system to avoid needing to run configure as root to -+ answer questions we already know the answers to. -+ * In the process, make surprising progress towards being able to -+ cross-compile the samba packages. -+ -+ -- Steve Langasek <vorlon@debian.org> Wed, 22 Aug 2001 23:35:00 -0500 -+ - samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. -diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache ---- samba-2.2.1a-bak/debian/config.cache Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,231 @@ -+# -+# 22 August 2001 Steve Langasek <vorlon@debian.org> -+# -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs. It is not useful on other systems. -+# If it contains results you don't want to keep, you may remove or edit it. -+# -+# By default, configure uses ./config.cache as the cache file, -+# creating it if it does not exist already. You can give configure -+# the --cache-file=FILE option to use a different cache file; that is -+# what configure does when it calls configure scripts in -+# subdirectories, so they share the cache. -+# Giving --cache-file=/dev/null disables caching, for debugging configure. -+# config.status only pays attention to the cache file if you give it the -+# --recheck option to rerun configure. -+# -+# -+# This config.cache file contains a list of acceptable autoconf -+# values which can be used in compiling Samba for Debian woody/sid. -+# -+# Autoconf sorts options alphabetically in its output. This file -+# groups options logically. -+ -+ -+# Load any architecture-specific settings -+if [ -n "$DEB_HOST_GNU_TYPE" \ -+ -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then -+ . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -+fi -+ -+ -+# This is at the top because it's most in need of regular tweaking. -+# These are options which are supported on 2.4 kernels, but not on 2.2 -+# kernels. -+ -+samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -+samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -+samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} -+ -+ -+# These are present in 2.2 kernels, but not in 2.0... -+ -+samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -+samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} -+ -+ -+# POSIX ACL support not present in Linux 2.2; not allowed in the -+# Debian packages, even if present on the build machine. -+ -+ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no} -+ -+ -+# Various basic libc/compiler stuff that it's blindingly obvious that -+# Linux supports (now watch me get bitten for saying that) -+ -+ac_cv_c_const=${ac_cv_c_const=yes} -+ac_cv_c_inline=${ac_cv_c_inline=inline} -+samba_cv_volatile=${samba_cv_volatile=yes} -+ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -+ac_cv_func_bzero=${ac_cv_func_bzero=yes} -+ac_cv_func_chmod=${ac_cv_func_chmod=yes} -+ac_cv_func_chown=${ac_cv_func_chown=yes} -+ac_cv_func_chroot=${ac_cv_func_chroot=yes} -+ac_cv_func_connect=${ac_cv_func_connect=yes} -+ac_cv_func_dup2=${ac_cv_func_dup2=yes} -+ac_cv_func_execl=${ac_cv_func_execl=yes} -+ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -+ac_cv_func_fchown=${ac_cv_func_fchown=yes} -+ac_cv_func_fstat=${ac_cv_func_fstat=yes} -+ac_cv_func_fsync=${ac_cv_func_fsync=yes} -+ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -+ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -+ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -+ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -+ac_cv_func_glob=${ac_cv_func_glob=yes} -+ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -+ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -+ac_cv_func_llseek=${ac_cv_func_llseek=yes} -+ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -+ac_cv_func_memmove=${ac_cv_func_memmove=yes} -+ac_cv_func_memset=${ac_cv_func_memset=yes} -+ac_cv_func_mktime=${ac_cv_func_mktime=yes} -+ac_cv_func_pipe=${ac_cv_func_pipe=yes} -+ac_cv_func_poll=${ac_cv_func_poll=yes} -+ac_cv_func_pread=${ac_cv_func_pread=yes} -+ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -+ac_cv_func_rand=${ac_cv_func_rand=yes} -+ac_cv_func_random=${ac_cv_func_random=yes} -+ac_cv_func_readlink=${ac_cv_func_readlink=yes} -+ac_cv_func_rename=${ac_cv_func_rename=yes} -+ac_cv_func_select=${ac_cv_func_select=yes} -+ac_cv_func_setenv=${ac_cv_func_setenv=yes} -+ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -+ac_cv_func_setsid=${ac_cv_func_setsid=yes} -+ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -+ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -+ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -+ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -+ac_cv_func_srand=${ac_cv_func_srand=yes} -+ac_cv_func_srandom=${ac_cv_func_srandom=yes} -+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -+ac_cv_func_strchr=${ac_cv_func_strchr=yes} -+ac_cv_func_strdup=${ac_cv_func_strdup=yes} -+ac_cv_func_strerror=${ac_cv_func_strerror=yes} -+ac_cv_func_strftime=${ac_cv_func_strftime=yes} -+ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -+ac_cv_func_symlink=${ac_cv_func_symlink=yes} -+ac_cv_func_usleep=${ac_cv_func_usleep=yes} -+ac_cv_func_utime=${ac_cv_func_utime=yes} -+ac_cv_func_utimes=${ac_cv_func_utimes=yes} -+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -+ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -+ac_cv_type_size_t=${ac_cv_type_size_t=yes} -+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -+samba_cv_socklen_t=${samba_cv_socklen_t=yes} -+ -+# Yes, we know Linux supports fcntl locking. Just ignore -+# any errors caused by building on an NFS mount. -+samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} -+ -+ -+# smbwrapper doesn't work because the glibc maintainers don't want -+# to support transparent userland VFS. We might as well preempt -+# any checks for shadowed symbols that are only useful for smbwrapper. -+ -+ac_cv_func___acl=${ac_cv_func___acl=no} -+ac_cv_func__acl=${ac_cv_func__acl=no} -+ac_cv_func___chdir=${ac_cv_func___chdir=no} -+ac_cv_func__chdir=${ac_cv_func__chdir=no} -+ac_cv_func___close=${ac_cv_func___close=no} -+ac_cv_func__close=${ac_cv_func__close=no} -+ac_cv_func___closedir=${ac_cv_func___closedir=no} -+ac_cv_func__closedir=${ac_cv_func__closedir=no} -+ac_cv_func___dup=${ac_cv_func___dup=no} -+ac_cv_func__dup=${ac_cv_func__dup=no} -+ac_cv_func___dup2=${ac_cv_func___dup2=no} -+ac_cv_func__dup2=${ac_cv_func__dup2=no} -+ac_cv_func___facl=${ac_cv_func___facl=no} -+ac_cv_func__facl=${ac_cv_func__facl=no} -+ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -+ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -+ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -+ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -+ac_cv_func___fork=${ac_cv_func___fork=no} -+ac_cv_func__fork=${ac_cv_func__fork=no} -+ac_cv_func___fstat=${ac_cv_func___fstat=no} -+ac_cv_func__fstat=${ac_cv_func__fstat=no} -+ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -+ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -+ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -+ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -+ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -+ac_cv_func___getdents=${ac_cv_func___getdents=no} -+ac_cv_func__getdents=${ac_cv_func__getdents=no} -+ac_cv_func___llseek=${ac_cv_func___llseek=no} -+ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -+ac_cv_func__llseek=${ac_cv_func__llseek=no} -+ac_cv_func___lseek=${ac_cv_func___lseek=no} -+ac_cv_func__lseek=${ac_cv_func__lseek=no} -+ac_cv_func___lstat=${ac_cv_func___lstat=no} -+ac_cv_func__lstat=${ac_cv_func__lstat=no} -+ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -+ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -+ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -+ac_cv_func___open=${ac_cv_func___open=no} -+ac_cv_func__open=${ac_cv_func__open=no} -+ac_cv_func___open64=${ac_cv_func___open64=no} -+ac_cv_func__open64=${ac_cv_func__open64=no} -+ac_cv_func___opendir=${ac_cv_func___opendir=no} -+ac_cv_func__opendir=${ac_cv_func__opendir=no} -+ac_cv_func___pread=${ac_cv_func___pread=no} -+ac_cv_func__pread=${ac_cv_func__pread=no} -+ac_cv_func___pread64=${ac_cv_func___pread64=no} -+ac_cv_func__pread64=${ac_cv_func__pread64=no} -+ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -+ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -+ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -+ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -+ac_cv_func___read=${ac_cv_func___read=no} -+ac_cv_func__read=${ac_cv_func__read=no} -+ac_cv_func___readdir=${ac_cv_func___readdir=no} -+ac_cv_func__readdir=${ac_cv_func__readdir=no} -+ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -+ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -+ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -+ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -+ac_cv_func___stat=${ac_cv_func___stat=no} -+ac_cv_func__stat=${ac_cv_func__stat=no} -+ac_cv_func___stat64=${ac_cv_func___stat64=no} -+ac_cv_func__stat64=${ac_cv_func__stat64=no} -+ac_cv_func___telldir=${ac_cv_func___telldir=no} -+ac_cv_func__telldir=${ac_cv_func__telldir=no} -+ac_cv_func___write=${ac_cv_func___write=no} -+ac_cv_func__write=${ac_cv_func__write=no} -+ac_cv_func___xstat=${ac_cv_func___xstat=no} -+ -+ -+ -+# Miscellaneous stuff that isn't, and shouldn't be, available -+# in Debian. Those interested in building debs for other systems may -+# need to remove some of these defines. -+ -+ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -+ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -+ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -+ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -+ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -+ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -+ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -+ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -+ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -+ac_cv_func_setluid=${ac_cv_func_setluid=no} -+ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -+ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -+ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -+ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -+ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -+ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -+ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -+ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -+ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -+ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -+ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -+ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} -diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux ---- samba-2.2.1a-bak/debian/config.cache.alpha-linux Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache.alpha-linux Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,12 @@ -+# 22 Aug 2001 Steve Langasek <vorlon@debian.org> -+ -+# This file contains autoconf settings specific to the alpha-linux -+# platform that should be preloaded when building for this architecture. -+ -+ -+# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -+# Linux 2.4 does. Ensure that packages compiled for woody remain -+# compatible with 2.2 kernels, even if the build machine is running 2.4. -+samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -+samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} -diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules ---- samba-2.2.1a-bak/debian/rules Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/rules Thu Aug 23 10:28:08 2001 -@@ -15,6 +15,14 @@ - # This has to be exported to make some magic below work. - export DH_OPTIONS - -+# Set the host and build architectures for use with config.cache loading, -+# cross-building, etc. -+DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -+DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -+ -+export DEB_HOST_GNU_TYPE -+export DEB_BUILD_GNU_TYPE -+ - BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb - - DESTDIR=`pwd`/debian/samba -@@ -48,8 +56,11 @@ - # ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ - # --localstatedir=/var - -+ if [ -f debian/config.cache ]; then \ -+ cp -f debian/config.cache source/config.cache; \ -+ fi - # [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp) -- [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) -+ [ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) - - touch configure-stamp - diff --git a/packaging/Debian/debian-sarge/README.build-upstream b/packaging/Debian/debian-sarge/README.build-upstream deleted file mode 100644 index 8efe8164c8..0000000000 --- a/packaging/Debian/debian-sarge/README.build-upstream +++ /dev/null @@ -1,78 +0,0 @@ -Building Samba Packages for Debian GNU/Linux --------------------------------------------- - -Building Debian packages is not as hard as some people might think. -The following instructions will allow you to build your own Samba -Debian packages. These instructions and the files in packaging/Debian/ -should be current as of Samba 3.0.2, and allow you to build Debian -packages for Debian unstable (so you need some development packages -available only in Debian unstable.) If you are using something newer -than 3.0.2 you might want to try to follow the instructions to see if -patches apply cleanly. If some patches don't apply cleanly please e-mail -samba@packages.debian.org since we might have fixed patches that we have -not yet integrated into upstream Samba. - -We try to maintain as much compatibility with previous releases -of Debian as possible, so it is possible that the files in -packaging/Debian/ can also be used to build Samba Debian packages for -other Debian releases. However, sometimes this is just not possible -because we need to use stuff that is only available on Debian unstable. - -Instructions ------------- - -If you want to build Samba packages for Debian and you just want to use -upstream sources, i.e. you don't want to wait for us to put official -packages out, or you want packages for a Debian version for which we -don't provide deb's, or you don't want to use official packages, or -you want to add --this-cool-switch to configure, or whatever, follow -these instructions: - -0) Make sure you have the following packages installed (in addition -to the normal Debian development packages -- dpkg-dev, libc6-dev, -devscripts, etc.): - - autoconf - debhelper (>= 4.1.13) - libpam0g-dev - libreadline4-dev - libcupsys2-dev - libacl1-dev, libacl1 (>= 2.2.11-1) - libkrb5-dev - libldap2-dev - po-debconf - python2.3-dev - - Notes regarding the packages required to build Samba Debian packages: - - * The libcupsys2-dev is not available in Debian Potato (Debian 2.2). - That's fine; the configure script won't detect CUPS support and the - resulting binaries won't support CUPS. - - * The list above is current as of samba-3.0.0rc2, but it can get - out of date. The best way to check what packages are required to - build the samba packages on Debian is to look for the Build-Depends: - field in the file debian/control. - -1) cd samba[-<version>]. For example, "cd samba-3.0.2". -2) cp -a packaging/Debian/debian/ . - It's important that you copy instead of symlink because the build - tools in Potato have a problem that prevents the build to work with - a symlink. If you are running a recent Debian distribution you don't - have to copy the directory and you can use a symlink instead: - "ln -s packaging/Debian/debian/ ." -3) dch -i (this is completely optional - only do it if you understand - Debian version numbers! Don't complain later if you can't upgrade - to official versions of the Samba packages for Debian.) - - Edit the changelog and make sure the version is right. For example, - for Samba 3.0.2, the version number should something like 3.0.2-0.1. -4) Run 'fakeroot debian/rules binary'. -5) That's it. Your new packages should be in ../. Install with dpkg. - -Please e-mail samba@packages.debian.org with comments, questions or -suggestions. Please talk to us and not to the Samba Team. They have -better things to do and know nothing about the Debian packaging system. - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-sarge/README.debian b/packaging/Debian/debian-sarge/README.debian deleted file mode 100644 index c5324a12ff..0000000000 --- a/packaging/Debian/debian-sarge/README.debian +++ /dev/null @@ -1,175 +0,0 @@ -0. Samba Team Notes: -This package is targeted at the current stable release of debian distribution -(sarge) running on a 2.6.x kernel. -This package has been made by Simo Sorce on behalf of the Samba Team. -Do not use Debian BTS to report bugs, it's not a debian project package. -Thanks to Eloy Paris and Steve "Vorlon" Langasek for the work they've done -and continue to do on debian unstable packages. That greatly helps me in -building up debian packages for the Team. - - -WARNING: This package has been built on a 2.6.x kernel ! - -Samba for Debian ----------------- - -This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek -<vorlon@debian.org>, current maintainers of the Samba packages for Debian, -based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew -Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael -Meskes <meskes@topsystem.de>, all previous maintainers of the packages -samba and sambades (merged together for longer than we can remember.) - -Contents of this README file: - -1. Notes -2. Upgrading from Samba 2.2 -3. Packages Generated from the Samba Sources -4. Support for NT Domains -5. Reporting bugs - - -1. Notes --------- - -- As of Samba 2.0.6-1, the Debian version of Samba is compiled with - Pluggable Authentication Modules (PAM) support. PAM support was - discontinued during the libc5 -> libc6 migration process and I never - brought it back until 2.0.6-1. - -- The smbfs package does not support the 2.0.x Linux kernels anymore. - This has been the case since the very first packages of the CVS sources - that eventually became Samba 2.2. To use the smbfs package you need to - run a 2.2.x kernel or later. - -- Starting with the Debian packages for Samba 2.2, the Samba log files (for - nmbd and smbd) have been moved to a new location: /var/log/samba/. The - files also have new names: log.nmbd and log.smbd. The old files - (/var/log/{nmb,smb} were moved to the new location. - - -2. Upgrading from Samba 2.2 ---------------------------- - -Samba 3.0 provides greatly improved support for modern Windows systems, -including support for Unicode and LDAP. In the process, Samba 3.0 -necessarily also breaks backward compatiblity with past releases. These -issues are documented herein; if you are aware of other problems related -to upgrading from Samba 2.2, please let us know at -<samba@packages.debian.org>. - -Samba and LDAP --------------- -Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with -LDAP support. However, the LDAP schema for Samba 3.0 differs -substantially from the schema used by many sites with Samba 2.2 (not -enabled in the Debian packages). If upgrading from an LDAP-enabled 2.2, -you will need to run the convertSambaAccount script found in -/usr/share/doc/samba-doc/examples/LDAP. A copy of the schema itself can -also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema. - -Character Sets --------------- -Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with -Windows clients. Owing to the close similarity between Windows and Unix -NLS charsets, in the past, many users were able to pass filenames -containing non-ASCII characters between clients and servers without -configuring Samba to know what character set was in use. Now, Samba -must be able to convert Unix filenames to Unicode before sending to the -client, so Samba must know what character set the filenames are being -converted from. If you will be sharing files with non-ASCII names, and -the filenames are not encoded with UTF-8, you will need to tell Samba -which character set to use with the 'unix charset' option. - -If you had previously specified 'character set' and 'client code page' -options under 2.2, these settings should be automatically converted for -you. - - -3. Packages Generated from the Samba Sources --------------------------------------------- - -Currently, the Samba sources produce the following binary packages: - -samba: A LanManager like file and printer server for Unix. -samba-common: Samba common files used by both the server and the client. -smbclient: A LanManager like simple client for Unix. -swat: Samba Web Administration Tool -samba-doc: Samba documentation. -smbfs: Mount and umount commands for the smbfs (works with 2.2.x and - above kernels, not with 2.0.x kernels.) -libpam-smbpass: pluggable authentication module for SMB password - database. -libsmbclient: Shared library that allows applications to talk to SMB servers. -libsmbclient-dev: libsmbclient shared libraries. -winbind: Service to resolve user and group information from a Windows NT - server. -python2.2-samba: Python bindings that allow access to various aspects of - Samba. - -Please note that the package smbwrapper (a shared library that provides -SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4 -does not exist any more. The reason is that starting with Samba 2.0.6-1, that -code does not even compile, and the upstream author (Andrew Tridgell) -recommended to disable the compilation of smbwrapper until some issues -with glibc2.1 get cleared out (the problem is with glibc, not with Samba -itself). - - -4. Support for NT Domains -------------------------- - -Samba 2.2 includes preliminary support for NT domains. A Samba server -can now be part of a Windows NT domain whose Primary Domain Controller -is a Windows NT server. This feature is supposed to be stable although I -haven't tried it myself. Read the documentation in the samba-doc package -for help on how to do this (hint: "security = domain" in the smb.conf -file). - -Samba 2.2 has also experimental support for Primary Domain -Controller. This means that a Samba server can act now as a PDC. There -are no special flags needed to compile Samba with NT domain PDC -support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation -section). - -Please note that NT domain PDC support is far from complete and is still -experimental. - - -5. Reporting Bugs ------------------ - -If you believe you have found a bug please make sure the possible bug -also exists in the latest version of Samba that is available for the -unstable Debian distribution. If you are running Debian stable this -means that you will probably have to build your own packages. And if the -problem does not exist in the latest version of Samba we have packaged it -means that you will have to run the version of Samba you built yourself -since it is not easy to upload new packages to the stable distribution, -unless they fix critical security problems. - -If you can reproduce the problem in the latest version of Samba then -it is likely to be a real bug. Your best shot is to search the Samba -mailing lists to see if it is something that has already been reported -and fixed - if it is a simple fix we can add the patch to our packages -without waiting for a new Samba release. - -If you decide that your problem deserves to be submitted to the Debian -Bug Tracking System (BTS) we expect you to be responsive if we request -more information. If we request more information and do not receive -any in a reasonable time frame expect to see your bug closed without -explanation - we can't fix bugs we can't reproduce, and most of the -time we need more information to be able to reproduce them. - -When submitting a bug to the Debian BTS please include the version of -the Debian package you are using as well as the Debian distribution you -are using. Think _twice_ about the severity you assign to the bug: we -are _very_ sensitive about bug severities; the fact that it doesn't -work for you doesn't mean that the severity must be such that it holds -a major Debian release. In fact, that it doesn't work for you it -doesn't mean that it doesn't work for others. So again: think _twice_. - - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-sarge/TODO b/packaging/Debian/debian-sarge/TODO deleted file mode 100644 index 5883f72a92..0000000000 --- a/packaging/Debian/debian-sarge/TODO +++ /dev/null @@ -1,4 +0,0 @@ -Nothing in our list right now. - -Debian Samba Maintainers.- -Sun Apr 6 01:34:21 EST 2003 diff --git a/packaging/Debian/debian-sarge/changelog b/packaging/Debian/debian-sarge/changelog deleted file mode 100644 index bd66900a7f..0000000000 --- a/packaging/Debian/debian-sarge/changelog +++ /dev/null @@ -1,2605 +0,0 @@ -samba (3.0.23-1) stable; urgency=low - - * samba 3.0.23 Samba Team Release - - -- Simo Sorce <idra@samba.org> Sat, 15 Jul 2006 10:01:30 -0400 - -samba (3.0.22-1) stable; urgency=high - - * samba 3.0.22 Samba Team Release - - -- Simo Sorce <idra@samba.org> Fri, 07 Apr 2006 15:45:30 -0400 - -samba (3.0.21b-1) stable; urgency=high - - * samba 3.0.21b Samba Team Release - - -- Simo Sorce <idra@samba.org> Tue, 07 Feb 2006 16:45:30 -0500 - -samba (3.0.21a-1) stable; urgency=high - - * samba 3.0.21a Samba Team Release - - -- Simo Sorce <idra@samba.org> Wed, 04 Jan 2006 16:10:30 -0500 - -samba (3.0.21-1) stable; urgency=low - - * samba 3.0.21 Samba Team Release - - -- Simo Sorce <idra@samba.org> Wed, 21 Dec 2005 15:35:30 +0100 - -samba (3.0.20b-1) stable; urgency=low - - * samba 3.0.20b Samba Team Release - - -- Simo Sorce <idra@samba.org> Sun, 23 Oct 2005 11:58:30 +0200 - -samba (3.0.14a-3) unstable; urgency=high - - * Urgency set to high for a bug that makes smbclient/libsmbclient - /almost/ mostly unusable - * Fix smbclient's search continuation logic so that it works correctly - against 2K servers offering VFAT-hosted shares; many thanks to - Jeremy Allison for the timely upstream fix. Closes: #309798. - * Update pt_BR debconf translation. Thanks to Andre Luis Lopes - <andrelop@debian.org>. (closes: #308510) - * Add Russian debconf translation, thanks to Yuriy Talakan - <yt@amur.elektra.ru>. (closes: #310063) - - -- Steve Langasek <vorlon@debian.org> Thu, 26 May 2005 23:37:57 -0700 - -samba (3.0.14a-2) unstable; urgency=low - - * Point the sense of the file_is_special() check right way around; - thanks to Matthijs Mohlmann for catching this. Closes: #305747. - * debian/patches/dos7-xcopy-always-copies-files.patch: - Fix the MS-DOS 7 XCOPY copying files over and over bug - Closes: #309003 - * Steve Langasek <vorlon@debian.org>: - - Add Christian Perrier to Uploaders:. Thanks, Christian :) - - -- Steve Langasek <vorlon@debian.org> Sun, 8 May 2005 04:43:21 -0700 - -samba (3.0.14a-1) unstable; urgency=low - - * New upstream version - - A more complete upstream fix for missing files in file listings, - should really give us working (closes: #302771); drop - xp-missing-files.patch, which has been superseded. - * Use the right path when removing mount.cifs binary in the clean - target. Closes: #303318. - - -- Steve Langasek <vorlon@debian.org> Mon, 18 Apr 2005 03:22:29 -0700 - -samba (3.0.11-1) unstable; urgency=high - - * New upstream version - - Fixes duplicated entry in swat(8) manpage (closes: #292957). - - Fix queue handling so that processes serving print clients don't - spin off into infinity and clobber the system (closes: #274969). - - Make sure we use C-locale toupper/tolower functions for case - conversion, since Turkish pairing rules are incompatible - (closes: #286174). - * Fix logrotate script to exit true instead of false when nmbd.pid is - missing (closes: #287263). - * Added Portuguese debconf translation. Thanks to Miguel Figueiredo - <elmig@debianpt.org>. (closes: #286375) - * Added Italian debconf translation. Thanks to Luca Monducci - <luca.mo@tiscali.it>. (closes: #284125) - * Add support for building on the Debian BSD and Hurd ports; thanks to - Robert Millan for the patch. (closes: #266693) - * debian/patches/xp-missing-files.patch: import patch from upstream to - fix missing entries in directory listings when talking to WinXP - servers (closes: #297771). - - -- Steve Langasek <vorlon@debian.org> Wed, 23 Mar 2005 00:13:16 -0800 - -samba (3.0.10-1) unstable; urgency=high - - * New upstream release. - - CAN-2004-1154: integer overflow can lead to remote code execution - by authenticated users; closes: #286023. - * High-urgency upload for sarge-targetted RC bugfix. - * Sync the fhs.patch to samba 3.0.10. - * Install mount.cifs suid root, to make user mounts possible - (closes: #283819). - * debian/patches/cups.patch: Change the default printing system, so we - can compile in CUPS support without making it the default -- CUPS is - not a reasonable default on Debian, at least for sarge. - - -- Steve Langasek <vorlon@debian.org> Fri, 17 Dec 2004 11:56:01 -0800 - -samba (3.0.9-1) unstable; urgency=low - - * New upstream release - - Fixes Win9x printing; closes: #283530, #282571, #283818. - - Fixes a problem with setting dosmodes on filesystems without ACL - support; closes: #283661. - - Drop ldapsam_compat.patch, redundant now that a fix is integrated - upstream - - -- Steve Langasek <vorlon@debian.org> Thu, 2 Dec 2004 01:11:39 -0800 - -samba (3.0.8-2) unstable; urgency=low - - * Fix the module paths for python2.3-samba so that "import foo from samba" - works, and include the __init__.py glue; closes: #222867). - * Enable quota support; closes: #246839. - * Fix missing symbols in libsmbclient (and libnss_wins), and add - -Wl,-z,defs to the libsmbclient link options to prevent future - instances of undefined symbols (closes: #281181). - * Fix for the legacy ldapsam_compat backend; thanks to Fabien - Chevalier for the patch (closes: #274155). - - -- Steve Langasek <vorlon@debian.org> Mon, 15 Nov 2004 06:54:13 -0800 - -samba (3.0.8-1) unstable; urgency=high - - * New upstream package. Urgency set to "high" because of a potential - Denial of Service vulnerability in previous 3.0.x releases - (CAN-2004-0930). (Eloy) - * Introduce new -dbg package, so we can make better sense out of the - cleverly-supplied backtrace emails. (Vorlon) - * Applied patch from Luke Mewburn <luke@mewburn.net> to fix missing - lock_path() to state_path() change in the FHS patches. (Eloy) - - -- Eloy A. Paris <peloy@debian.org> Mon, 8 Nov 2004 13:39:34 -0500 - -samba (3.0.7-2) unstable; urgency=high - - * High-urgency upload for sarge-targetted RC fixes. - * Use autogen.sh in unpatch-source as well as in patch-source, to get - rid of the autom4te.cache cruft. - * debian/patches/make-distclean.patch: add some missing files to the - distclean target in source/Makefile.in (mostly-fixes: #276203). - * Change compile-time default of 'use sendfile' to 'no', since the - current Samba implementation is broken (closes: #261917, #275741, - #270175). - * Add mount.cifs into the smbfs package; thanks to Igor Belyi for - showing us just how simple this patch should be. ;) Since cifs is - the preferred kernel driver in 2.6, bugs related to smbfs and 2.6 - are considered closed unless someone can show that they exist with - the cifs driver as well (closes: #249890, #269443, #227791, #236869, - #260707, #261808, #270175). - * Fix FHS migration code so that it only affects upgrades from old - package versions, and doesn't cause us to mess with non-standard - directories that may have been re-added by the admin - (closes: #251858). - - -- Steve Langasek <vorlon@debian.org> Tue, 26 Oct 2004 01:35:23 -0700 - -samba (3.0.7-1) unstable; urgency=high - - * New upstream release. This release fixes two possible denial of - service conditions; one in nmbd and one in smbd. The CVE numbers - for these vulnerabilities are: - - CAN-2004-0807 for the smbd DoS - CAN-2004-0808 for the nmbd DoS - - Urgency is set to "high" because of these vulnerabilities; so this - new release propagates to testing ASAP. - - Thanks to the Samba Team and the Debian Security Team for the - heads up. - * Remove post-3.0.6 patches that are now in 3.0.7. - - -- Eloy A. Paris <peloy@debian.org> Mon, 13 Sep 2004 00:53:38 -0400 - -samba (3.0.6-4) unstable; urgency=low - - * Update LDAP schema (closes: #269797). - * Applied a couple of upstream fixes that will be present in Samba 3.0.7. - - -- Eloy A. Paris <peloy@debian.org> Tue, 7 Sep 2004 15:28:42 -0400 - -samba (3.0.6-3) unstable; urgency=low - - * Put libsmbclient where it belongs, in /usr/lib. (closes: #267704) - - -- Eloy A. Paris <peloy@debian.org> Wed, 25 Aug 2004 01:58:37 -0400 - -samba (3.0.6-2) unstable; urgency=low - - * Added Danish debconf translation. Thanks to Claus Hindsgaul - <claus_h@image.dk>. (closes: #232884) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 17:24:19 -0400 - -samba (3.0.6-1) unstable; urgency=low - - * New upstream version. - * Incorporate Turkish debconf translation; thanks to Recai Oktas - <roktas@omu.edu.tr>. (closes: #252031) - * Update pt_BR debconf translation. Thanks to Andre Luis Lopes - <andrelop@debian.org>. (closes: #208113) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 12:34:44 -0400 - -samba (3.0.5-2) unstable; urgency=high - - * Patches from Fabien Chevalier <fabien.chevalier@supelec.fr> - to fix: - + libnss_wins crashes other programs (closes: #252591) - + Can't list share files/dirs, but can acces deeper files/dirs - (closes: #264572) - + Samba 3.0.5 Printserver doesn't work with WinXP SP2 (closes: #265871) - * Urgency "high" to make it into testing as soon as possible since - at least #265871 is pretty bad now that WinXP SP2 has been released. - Thanks for the help Fabien! Both Vorlon and I have been very busy - lately. - - -- Eloy A. Paris <peloy@debian.org> Wed, 18 Aug 2004 13:25:41 -0400 - -samba (3.0.5-1) unstable; urgency=high - - * New upstream version. Urgency "high" because of potential buffer - overflows. The security fixes are the only difference between - 3.0.4 and 3.0.5. - - -- Eloy A. Paris <peloy@debian.org> Thu, 22 Jul 2004 08:07:36 -0400 - -samba (3.0.4-5) unstable; urgency=low - - * Doh! Build-depends on libcupsys2-dev (>=1.1.20final+cvs20040330-4), - not an unversioned libcupsys2-dev. (closes# 250523) - - -- Eloy A. Paris <peloy@debian.org> Tue, 25 May 2004 07:43:54 -0400 - -samba (3.0.4-4) unstable; urgency=low - - * Rebuilt with libcupsys2-gnutls10 for unstable. - Closes: #250424, #250483, #250491, #250515, #250523, #250592, #250736 - Closes: #250742, #250733 - - -- Eloy A. Paris <peloy@debian.org> Mon, 24 May 2004 22:32:52 -0400 - -samba (3.0.4-3) unstable; urgency=low - - * Color me stupid; I uploaded an experimental version to unstable. - - -- Eloy A. Paris <peloy@debian.org> Sat, 22 May 2004 00:40:58 -0400 - -samba (3.0.4-1) unstable; urgency=low - - Eloy: - - * New upstream version. - Closes: #247640 (New upstream version available) - Closes: #238905 (Printing crash fix) - Closes: #247090 (panic in viewing printerqueue) - - Vorlon: - - * Incorporate Catalan debconf translations; thanks to - Aleix Badia i Bosch <abadia@ica.es> and the Debian L10n Catalan Team. - (closes: #236640) - * Incorporate Czech debconf translations; thanks to - Miroslav Kure <kurem@upcase.inf.upol.cz> (closes: #236274). - * Update libsmbclient shlibs, due to an incompatibility with older - versions that prevents gnome-vfs from working correctly - (closes: #245869). - - -- Eloy A. Paris <peloy@debian.org> Fri, 21 May 2004 11:42:19 -0400 - -samba (3.0.2a-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 24 Feb 2004 10:30:47 -0500 - -samba (3.0.2-2) unstable; urgency=high - - * Apply patch from Urban Widmark <urban@teststation.com> to prevent - users from mounting remote filesystems containing suid files - (closes: 232327). This represents an exploitable security hole on - systems running Linux 2.6 kernels. - - -- Steve Langasek <vorlon@debian.org> Thu, 12 Feb 2004 21:38:40 -0600 - -samba (3.0.2-1) unstable; urgency=high - - * New upstream release. - - LaMont Jones: correct false failure LFS test that resulted - in _GNU_SOURCE not being defined (thus resulting in strndup() - not being defined) (closes: #226694) - - Segfault fixes. (closes: #230012) (maybe more, but we need bug - reporters to confirm.) - - Urgency "high" due to a password initialization bug that could grant - an attacker unauthorized access to a user account created by the - mksmbpasswd.sh shell script. See WHATSNEWS.txt for details and - workarounds for those not wishing to upgrade (which is a bad idea - anyway since this new release fixes lots of other bugs.) - - -- Eloy A. Paris <peloy@debian.org> Sun, 8 Feb 2004 10:06:29 -0500 - -samba (3.0.1-2) unstable; urgency=low - - * Include ntlm_auth's man page. - * Don't create directories outside of the source directory during - package build time. (closes: #227221, #227238, #225862) - * Don't include the "Using Samba" book in the swat package, just a - symlink that points to the book included in the samba-doc package. - - -- Eloy A. Paris <peloy@debian.org> Tue, 13 Jan 2004 13:48:13 -0500 - -samba (3.0.1-1) unstable; urgency=low - - * New upstream version (closes: #225565) - * Add support in the dhcp hook for netbios scope, and handle better - the case of multiple DHCP-using interfaces (closes: #224109). - * Use "tail -n 1 ..." instead of "tail -1 ..." so POSIX-compliant - tail works. Thanks to Paul Eggert <eggert@twinsun.com>. - * Include /usr/bin/ntlm_auth in the winbind package. - * Run configure with "--with-piddir=/var/run/samba" since the - default got changed to /var/run in this new upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 30 Dec 2003 16:21:31 -0500 - -samba (3.0.0final-1) unstable; urgency=low - - * It's here, it's here, it's here, Samba 3.0.0 is here! - * Incorporate Japanese debconf translations; thanks to Kenshi Muto - <kmuto@debian.org>. (closes: #209291) - - -- Eloy A. Paris <peloy@debian.org> Thu, 25 Sep 2003 13:39:28 -0400 - -samba (3.0.0beta2+3.0.0rc4-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Sep 2003 08:47:56 -0400 - -samba (3.0.0beta2+3.0.0rc3-1) unstable; urgency=low - - * New upstream release. Last Release Candidate according to the - Samba Team. Samba 3.0.0 is around the corner, in a week or so. - - Fixes use of non-PIC code in nss shared libraries (closes: #208773) - - 'unix password sync' option now runs the unix password program as - root again (closes: #209739). - * One-line patch to make packages buildable with distcc (closes: #210227) - - -- Eloy A. Paris <peloy@debian.org> Tue, 9 Sep 2003 07:57:16 -0400 - -samba (3.0.0beta2+3.0.0rc2-1) unstable; urgency=low - - * New upstream release. - * Link against libgnutls7 instead of libgnutls5. (closes: #208151) - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Sep 2003 21:37:13 -0400 - -samba (3.0.0beta2+3.0.0rc1-1) unstable; urgency=low - - * New upstream version (skipped samba 3.0.0beta3 due to time - constraints.) This ugly version number will go away when the final - Samba 3.0.0 is released. - * Drag new unpackaged tools into the packages: smbcquotas (smbclient), - vfs modules (samba), smbtree(1) manpage (smbclient), tdbbackup(8) - manpage (samba). (closes: #151158) - * Switch to DH_COMPAT level 4: - - no explicit conffile listings needed - - the postinst for libsmbclient is now completely autogenerated - - use the default init script handling (with support for - invoke-rc.d) in debhelper, instead of the currently buggy upgrade - path (closes: #185439) - - add support for ${misc:Depends} in control for those packages with - init scripts - * Add versioned dependency on libpam-runtime and change - /etc/pam.d/samba to use the new common PAM config blocks. - * New python2.3-samba package (old python2.2-samba is no more.) - (closes: #206171) - - -- Eloy A. Paris <peloy@debian.org> Mon, 25 Aug 2003 17:05:14 -0400 - -samba (3.0.0beta2-1) unstable; urgency=low - - * New upstream release - - The smb.conf(5) manpage documents config options again - (closes: #197963). - - Handling of winbind/idmap has been restructured; domain members - should be able to map domain accounts to local accounts again - (closes: #196815). - - Use the locale charset for 'display charset' by default - (closes: #194406). - - Fix for segfault in smbclient when using the -b option - (closes: #196833). - - Handle an empty 'passdb backend' list gracefully (closes: #193946). - * Don't set 'display charset' anymore on upgrade, since this is now - grabbed from the locale by default -- a much better option. - * Removed time.c.patch which is now in the upstream sources. - * Update FHS patch for two new tdb files (netsamlogon_cache.tdb, - privilege.tdb). - * Remove python-linker.patch, since the Kerberos package has been - fixed to no longer use rpath - * Remove configure.patch: the hppa glibc bug this was added for is - long since fixed, and upstream isn't interested in supporting this - kludge. - * Update references to missing documentation in sample smb.conf file - (closes: #187632). - * Fix handling of krb5 link line, building on a patch from Stefan - Metzmacher <metze@metzemix.de>. - * Add patch so smbclient's tar support works with popt - (closes: #194921). - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Jul 2003 20:59:09 -0500 - -samba (3.0.0beta1-2) unstable; urgency=low - - * Update build-deps to libacl1-dev (>= 2.2.11-1), libacl1 (>= 2.2.11-1) - to make sure we get the right shlib dependencies (closes: #193149). - * Update the dhcp config hooks so they're suitable for sourcing (i.e., - don't call "exit") (closes: #196477). - * Bring package into line with current policy by adding support for - the DEB_BUILD_OPTIONS flag, and enabling debugging symbols (-gstabs) - by default - * Make sure libpam-smbpass is a self-contained DSO. - * Fix a typo in samba-common.dhcp that caused us to spuriously rewrite - the server list. - * Fix python install script to ignore -Wl linker flags, as seen in the - output from the latest krb5-config. - * Add LDAP and Unicode information about upgrading from 2.2 to - README.debian. - * Remove dangerous and confusing browse options from the default - smb.conf (closes: #198804). - * Reorder smb.conf options for clearer grouping, and clarify the - comments. - * Add a default [print$] share to the sample smb.conf, and create the - necessary tree under /var/lib/samba/printers. (closes: #168173) - * s/winbind/idmap/ in smb.conf, since the option names have changed. - * Fix the patch for postexec handling, so that we chdir("/") at the - right time. - - -- Steve Langasek <vorlon@debian.org> Thu, 12 Jun 2003 15:02:00 -0500 - -samba (3.0.0beta1-1) unstable; urgency=low - - * New upstream version. - - fix for empty browselist bug (closes: #194553) - - fix for tab completion segfault in smbclient (closes: #194776) - - Samba now works as a domain member again without segfaulting - (closes: #194134, #194394, #194775) - - WinXP machines can join a Samba-controlled domain again - (closes: #195362) - * Build-depend on python-dev >= 2.2 instead of on just python-dev - (without version). - * Added Vorlon'n patch to source/lib/time.c to fix #194075. - (closes: #194075) - - -- Eloy A. Paris <peloy@debian.org> Sun, 8 Jun 2003 22:26:43 -0400 - -samba (2.999+3.0.alpha24-3) unstable; urgency=low - - * Make sure Samba DSOs are compiled with -fPIC. (closes: #194324) - * Rebuild against pristine Kerberos libs, to squelch warnings about - versioned symbols. (closes: #194431, #194396) - - -- Steve Langasek <vorlon@debian.org> Thu, 22 May 2003 15:32:00 -0500 - -samba (2.999+3.0.alpha24-2) unstable; urgency=low - - * Fixed description of the smbfs package. (closes: #194183) - * Negate the sense of the unixsam check when upgrading. (closes: #194234) - - -- Steve Langasek <vorlon@debian.org> Wed, 21 May 2003 12:21:53 -0400 - -samba (2.999+3.0.alpha24-1) unstable; urgency=low - - * New upstream version. (closes: #189354) - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 May 2003 13:55:57 -0400 - -samba (2.999+3.0.alpha23-5) unstable; urgency=low - - * Move the python package from section "net" to section "python". - * Make sure we use PIC code for python on all platforms. - * French translation of an additional debconf template, courtesy of - Christian Perrier <bubulle@debian.org>. (closes: #188832) - * Updated Brazilian Portuguese translation from André LuÃs Lopes - <andrelop@ig.com.br>. - * s/unixsam/guest/ everywhere, since the unixsam backend is now - deprecated. (closes: #190095) - * Create our temp config file as /etc/samba/smb.conf.dpkg-tmp; not - only does using /tmp violate SELinux policies, it introduces the - possibility of data loss during the final copy if /tmp is a separate - filesystem. (closes: #189823) - * Pull in fix for SWAT, so that logins work again - (closes: #188255, #192077). - * Move passdb.tdb into /var/lib/samba, since it's not user-editable. - * Make sure with don't ship any .cvsignore files. - * Don't ship examples for python2.2-samba and samba-doc in an - "examples" directory inside another "examples" directory. - - -- Eloy A. Paris <peloy@debian.org> Tue, 6 May 2003 12:05:46 -0400 - -samba (2.999+3.0.alpha23-4) unstable; urgency=low - - * Instead of s/LPT1:/LPT:/, we need to do s/LPT:/LPT1:/ -- now all - non-RPC printing clients are working again. - * Change shlibs to 0 instead of 0.1. The library already in the - archive is using this soname, and there are no packages depending - on libsmbclient, so skip changing the package name for now. - (closes: #188661) - - -- Steve Langasek <vorlon@debian.org> Fri, 11 Apr 2003 14:42:00 -0500 - -samba (2.999+3.0.alpha23-3) unstable; urgency=low - - * Put the Samba Python modules in /usr/lib/python2.2/site-packages/, - not in /usr/lib/python2.2/lib-dynload/. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Apr 2003 19:49:25 -0400 - -samba (2.999+3.0.alpha23-2) unstable; urgency=low - - * New package python2.2-samba that includes the Python modules - included in the Samba sources. Feedback on these modules and the new - package is welcome, as we (Debian Samba maintainers) don't use them. - (closes: #170731, #173322) - * Move libsmbclient-dev from section "devel" to "libdevel". - * Fix panic action script to give a sensible error message instead of - an empty backtrace when we don't have permission to attach to the - process. (closes: #188164) - * Fix libpam-smbpass so that it really does something. (closes: #178245) - * Apply patch to fix printing-related segfaults. (closes: #188076) - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Apr 2003 21:40:33 -0400 - -samba (2.999+3.0.alpha23-1) unstable; urgency=high - - * new upstream release, includes security fix for DSA-262 - * tweak the debconf templates to avoid references to specific - front-ends (closes: #183718) - - -- Steve Langasek <vorlon@debian.org> Sun, 9 Mar 2003 14:58:00 -0600 - -samba (2.999+3.0.alpha21-5) unstable; urgency=low - - * touch up the package descriptions a little bit (caps, punctuation) - * remove addtosmbpass, which snuck back in when we weren't looking - * reverse the position of the wins server tag, after looking more - closely at the code (closes: #183061) - * fix a glitch in the Spanish .po that rendered it invalid, plus a typo - * updated Brazilian Portuguese templates (closes: #183295) - * fix a typo in upstream manpage (s/shave/share/) (closes: #180546) - * run sed before we run sed, to deal with crazybad special chars - in the workgroup name (!) (closes: #176717) - - -- Steve Langasek <vorlon@debian.org> Sat, 1 Mar 2003 15:14:00 -0600 - -samba (2.999+3.0.alpha21-4) unstable; urgency=low - - * add scripts to samba-common to grab the netbios-name-servers options - if we're running a DHCP client (closes: #38413) - * major rearrangement of build scripts: install target now operates on - debian/tmp, not debian/samba, so we can see when new files are - added and decide where to put them; several files that should have - been in samba-common but were in samba (for the above reason) -- - smbcacls, -- have been moved, with a replaces: added. - * Fix rc script so that whitespace is consistent between inetd and - daemon modes (closes: #174677). - * smbclient -M must always connect to port 139, because port 445 - doesn't support messaging and we can't do the port 135 stuff yet - (closes: #175292, #167859). - * Import the diff from upstream CVS, which has fixed a few bugs - (closes: #178219, #177583, #181467, #181487, #181603, #175864). - Remove a few patches of ours which are now superseded. - * Add po-debconf support to the tree, for better i18n. - * Install the libsmbclient.so symlink in the libsmbclient-dev package, - per policy (closes: #181466). - - -- Steve Langasek <vorlon@debian.org> Fri, 27 Dec 2002 00:37:00 -0600 - -samba (2.999+3.0.alpha21-3) unstable; urgency=low - - * Drop --with-ldapsam from the configure options, since this no longer - means what we thought it did. Revert patch for changing the 'passdb - backend' defaults. - * Add patch from CVS HEAD to fix pdbedit segfault; postinst script - should work better now. (Closes: #173936) - - -- Steve Langasek <vorlon@debian.org> Sun, 22 Dec 2002 13:29:00 -0600 - -samba (2.999+3.0.alpha21-2) unstable; urgency=low - - * add CONFIGDIR to the set of directories exported in the install - target, so we don't try to write to /etc/ on the autobuilders. - * Reset the default 'passdb backend' value to something sensible, so - that we don't unnecessarily break upgrading systems (closes: #173731). - - -- Steve Langasek <vorlon@debian.org> Fri, 20 Dec 2002 09:13:00 -0600 - -samba (2.999+3.0.alpha21-1) unstable; urgency=low - - * new upstream release, many patches now incorporated upstream - - -- Steve Langasek <vorlon@debian.org> Mon, 16 Dec 2002 23:39:00 -0600 - -samba (2.999+3.0.alpha20-4) unstable; urgency=low - - * Remove obsolete comments about non-existant LDAP support in the - Debian Samba packages. (Closes: #165035) - * Apply patch for segfault in pam_smbpass when using the unixsam - backend. - * Drop support for nmbd in inetd, since it's not supported by - upstream and is reported to cause problems (closes: #23243, #137726, - 165037). - * Clarify example printing configs in smb.conf (closes: #168174). - * Make sure nmbd still responds to SIGTERM if it has no interfaces to - listen on (closes: #168079). - * Fix to get samba working again on 64-bit archs, after a - pointer<->int size mismatch bug. Already fixed in upstream CVS. - * Merge fix from CVS for broken libsmbclient.h references to internal - structures (closes: #162956). - * Add a default 'panic action' for Samba that will give us genuinely - useful debugging information after a crash. - * Fixed correct patch to example configurations in the libpam-smbpass - packages (closes: #169350). - * acl-dev is not in sid anymore; Build-Depend on libacl1-dev instead - (closes: #169682). - * Only ask the user for permission to edit if there's a chance of us - damaging something. - - -- Steve Langasek <vorlon@debian.org> Mon, 18 Nov 2002 19:53:00 -0500 - -samba (2.999+3.0.alpha20-3) unstable; urgency=low - - * Make sure smbstatus behavior is sane when Samba *has* been started, - as well as when it has not (closes: #164179). Thank to Robbert Kouprie - <robbert@radium.jvb.tudelft.nl> for this patch. - * Not using 'killall' in any of the maintainer scripts (the last one - remaining was winbind.logrotate.) We now just use 'kill' to send - a SIGHUP to a specific PID (which is stored in a file in - /var/run/samba.) - * Do not depend on procps because we're not using killall anymore. - - -- Eloy A. Paris <peloy@debian.org> Tue, 15 Oct 2002 22:15:57 -0400 - -samba (2.999+3.0.alpha20-2) unstable; urgency=low - - * fix an off-by-one error in smbd/lanman.c, which should shut off the - flood of log messages (closes: #157432) - * add a --config-cache option to the configure invocation, since - autoconf 2.5 doesn't load config.cache by default (closes: #163504) - - -- Steve Langasek <vorlon@debian.org> Sat, 5 Oct 2002 01:40:00 -0500 - -samba (2.999+3.0.alpha20-1) unstable; urgency=low - - * new upstream release - - non-primary groups appear to work again (closes: #161271) - * the official beginning of the upstream 3.0 branch - * exit without error from smbstatus when no connections have - been seen yet (closes: #161489) - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Oct 2002 19:02:00 -0500 - -samba (2.999+3.0cvs20020906-1) unstable; urgency=low - - * CVS update - - domain authentication works again (closes: #158698) - * Factor out common code in samba-common.config - * Handle character set settings in smb.conf on upgrade - (closes: #153913, #158770) - * Don't use killall in logrotate script; there are better ways - (closes: #160076) - * Ignore value of 'hostname lookups' for hosts allow/hosts deny - (closes: #154376) - - -- Steve Langasek <vorlon@debian.org> Sat, 7 Sep 2002 11:46:00 -0500 - -samba (2.999+3.0cvs20020829-1) unstable; urgency=low - - * CVS update. - * Move the smb.conf manpage to the samba-common package (closes: #159572) - - -- Steve Langasek <vorlon@debian.org> Thu, 29 Aug 2002 17:53:25 -0500 - -samba (2.999+3.0cvs20020827-1) unstable; urgency=low - - * CVS update. (Closes: #158508) - * Part 1 of 3 of the library separation patch that Vorlon wrote has - gone upstream - removed the patch from our patches/ directory. - * Debconf note to warn users that their smb.conf will be re-written - and changed if they use Swat to maintain it. (Closes: #158479) - * Fixed typo in samba.prerm. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Aug 2002 15:23:23 -0400 - -samba (2.999+3.0cvs20020825-2) unstable; urgency=low - - * scale back the tdbsam migration support, because of undesirable - side-effects; now always defaults to 'no'. - * strip out hyperactive library dependencies that are only needed by - smbd (closes: #155156). - * nuke any broken registry.tdb files left by previous CVS snapshots. - * support rolling back the smbpasswd->tdbsam conversion on downgrade, - since many people are likely to need to downgrade for a while. - * remove postrm handling of legacy directories, and add handling of - current ones. - - -- Steve Langasek <vorlon@debian.org> Sun, 28 Jul 2002 09:44:24 -0500 - -samba (2.999+3.0cvs20020825-1) unstable; urgency=low - - * CVS update. These packages are based on Samba 3.0alpha19 + any - code commited after 3.0alpha19 was released. - - -- Eloy A. Paris <peloy@debian.org> Sun, 25 Aug 2002 14:56:46 -0400 - -samba (2.999+3.0cvs20020723-1) unstable; urgency=medium - - * remove spurious line from samba.config - * migrate from smbpasswd to tdbsam - * re-add the pdbedit util and manpage - * compile in ldapsam support (closes: #146935) - * add PRIVATEDIR to the list of vars we override for the install - target, so Samba doesn't try to create /etc/samba (closes: #153746). - * fix makefile handling of LOGBASEDIR, so that logs always end up in - the right place (closes: 153727). - * Fixed bug in the FHS migration path that causes nmbd to read its - state from one location, but write it out to another. (closes: #154210) - * Make sure nmbd is always looking for wins.tdb in the same place. - - -- Steve Langasek <vorlon@debian.org> Fri, 19 Jul 2002 21:38:54 -0500 - -samba (2.99.cvs.20020713-1) unstable; urgency=low - - * first attempt for 3.0pre. - * only post a debconf note about moving logfiles if we're upgrading - from a version that had the logfiles in the old location - (closes: #152924). - - -- Steve Langasek <vorlon@debian.org> Sat, 13 Jul 2002 12:54:25 -0500 - -samba (2.2.5-2) unstable; urgency=low - - * No longer ship make_printerdef, which is deprecated. (closes: #63059) - * Clean up some empty directories from the samba package. - * Add call to dh_installinit for winbind rc.x symlinks (closes: #151860). - * Clean up per-package documentation lists, to reduce clutter - (closes: #147638). - * Make sure we don't ship pdbedit's man page since we are still using - smbpasswd passwords. (closes: #152208) - * move libnss_wins.so to libnss_wins.so.2, where glibc expects to find - it (closes: #148586). - * reorder postinst, so that installing samba-common from scratch loads - the debconf answers properly (closes: #151985). - * add lintian overrides for winbind, to eliminate some noise. - * rename pam_smbpass changelog to comply with policy. - - -- Steve Langasek <vorlon@debian.org> Sun, 23 Jun 2002 22:45:04 -0500 - -samba (2.2.5-1) unstable; urgency=low - - * New upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 9 Jun 2002 15:49:21 -0400 - -samba (2.2.4+2.2.5pre1-1) experimental; urgency=low - - * Getting ready for Samba 2.2.5. - * Remove patches/parse_spoolss.patch, now included upstream. - * Fixed thinko WRT POSIX ACL support, which we "half-enabled" in - 2.2.4-1. We don't use POSIX ACL support ourselves, so we'd - appreciate reports from those using this feature so we can - be sure this works. - * Fix the filename-matching algorithm used for smbtar's 'exclude' - functionality. (closes: #131571) - * Look for secrets.tdb in /var/lib/samba, and handle in the postinst. - This is not really a config file, because users don't edit it. - (closes: #147429) - * Doxygen fix for libsmbclient.h, thanks to Tommi Komulainen - <Tommi.Komulainen@iki.fi> for the patch. (closes: #144847) - - -- Eloy A. Paris <peloy@debian.org> Tue, 28 May 2002 11:33:51 -0400 - -samba (2.2.4-1) unstable; urgency=low - - * New upstream release (closes: #144713) - * Building with POSIX ACL support (closes: #137819) - * Include samples, exclude INSTALL from libpam-smbpass (closes: #145055) - * Compile with --with-automount, for NIS homedir support (closes: #123396) - * Add a proper 'flags' field to the mount entry we write to /etc/mtab; - fixes a display bug with mount (closes: #140397) - * Added logic to /etc/init.d/samba so a help message is printed out - when Samba is running from inetd _and_ we are not booting, i.e. the - user called the init script manually. Thanks to Francesco - Potorti <pot@gnu.org> for the suggestion on how to implement this. - (Closes: #139807, #140204) - * samba.postinst: added logic so we don't call /etc/init.d/samba if - we are running from inetd (this prevents the stupid help message - to be printed during package upgrades if we are running from inetd.) - * samba.prerm: idem. - * /etc/init.d/samba: delete stale PID files after nmbd and smbd are - stopped. This prevents start-stop-daemon from printing an ugly - error message when called from '/etc/init.d/samba stop'. I prefer - this than running start-stop-daemon with --oknodo because - start-stop-daemon might print other important error messages that with - --oknodo it would otherwise not print. (Closes: #102187, #109301) - * Patch from jerry@samba.org to fix parsing of spoolss structures. - - -- Eloy A. Paris <peloy@debian.org> Thu, 23 May 2002 23:16:52 -0400 - -samba (2.2.3a-7) unstable; urgency=medium - - * More README.debian updates. - * Neutralize the smb.conf 'lock dir' directive, which doesn't mean - what the FHS says it should, and causes us no end of grief. - (Closes: #122299) - * LPRng-handling patch so that jobs printed to recent versions of - LPRng show up properly as 'done' instead of 'paused' in the Windows - print queue. Thanks to Jaroslav Serdula <serdula_jaroslav@vse.sk> - for this patch. (Closes: #139458) - * Applied patch from Urban Widmark <urban@teststation.com> - (smbfs upstream maintainer) to add a '-n' option to smbmount - that does the same as mount's '-n'. (Closes: #139590) - * Minor tweak to unpatch-source so we unpatch sources in the - reverse order we patched them. - * Don't depend on grep in samba.prerm to determine if Samba was - running before the upgrade starts. - * Tweak the wording of debconf templates. - * Incorporate debconf translations for French, Spanish and Portuguese; - thanks to Carlos Valdivia Yagüe <valyag@hotpop.com> (es), - Andre Luis Lopes <andrelop@ig.com.br> (pt_BR), and Philippe - Batailler and Denis Barbier <barbier@debian.org> (fr). - (closes: #142657, #142659, #141551, #141699, #141682) - * Fixed symlinks in the swat package so the point to /usr/share/doc/ - instead of /usr/doc/. Added note to the description of the - swat packages that says that samba-doc must be installed for - the on-line documentation to work. Thanks to Torne Wuff - <torne@wolfpuppy.org.uk>. (Closes: #95437) - * 'dh_installinit -n' gives us no initscript handling -- we need to - handle all starting and stopping of daemons ourselves, which wasn't - happening in the {pre,post}rm scripts. - * Vary the priority of the debconf question "Do you want to generate - /etc/samba/smbpassd?" depending on whether the file already exists. - File exists -> priority 'medium', file does not exist -> priority - 'low'. Changed priorities of all other questions from 'high' to 'medium'. - - -- Steve Langasek <vorlon@debian.org> Sat, 20 Apr 2002 17:48:27 -0400 - -samba (2.2.3a-6) unstable; urgency=low - - * Call db_stop as soon as we're done with debconf in the postinst, to - avoid hanging bugs (closes: #137813) - * Ony call 'update-inetd --add' on first installation, just as we only - call 'update-inetd --remove' on package purge. - * Bring our shipped smb.conf closer in line with the upstream - defaults: don't twiddle the send/recv buffer sizes, since the Linux - kernel already provides a much better default setting - (closes: #80966, #80934, #137415, #133477) - * Added libnss_wins.so to the winbind package (closes: #137201) - * Updates to README.debian. - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 Mar 2002 10:57:40 -0500 - -samba (2.2.3a-5) unstable; urgency=low - - * Having multiple workgroup lines in your smb.conf, though wacky, is - perfectly valid. Account for this in samba-common.config. - (closes: #137157) - - -- Steve Langasek <vorlon@debian.org> Sun, 10 Mar 2002 21:52:51 -0600 - -samba (2.2.3a-4) unstable; urgency=low - - * Fixed typo in samba.postinst. Cosmetic fixes there as well. - * Fix to improper usage of /usr/bin/tr in samba-common config script - (closes: #137744) - - -- Steve Langasek <vorlon@debian.org> Sat, 9 Mar 2002 14:14:02 -0500 - -samba (2.2.3a-3) unstable; urgency=medium - - * Make sure /etc/init.d/samba is executable before calling it - in the postinst. Quickly checked all other maintainer scripts - to make sure we are not calling an init script if it is not - executable. (closes: #137321) - * Fix up maintainer scripts to detect if samba was not running before - an upgrade. (closes: #33520, #130534) - * Make sure /etc/samba/ is included in the samba-common package. - Closes: #137157 - - -- Steve Langasek <vorlon@debian.org> Fri, 8 Mar 2002 11:13:21 -0500 - -samba (2.2.3a-2) unstable; urgency=low - - * merge in debconf support: - - Moved all smb.conf-related questions to samba-common (smb.conf - is part of the samba-common package, not the samba package.) - - smb.conf is not a samba-common conffile anymore since it is - being managed by debconf. It is ABSOLUTELY necessary to make - sure /etc/samba/smb.conf _NEVER_ gets overwritten by changes - made via debconf. In other words, any changes made by the user - should be honored by the debconf interface. - - samba.postinst now moves old log files from /var/log/ to - /var/log/samba/. There's a Debconf note that informs the user - the log files are stored now in a new location. - - debian/control: - + Make samba depend on debconf. - - New file debian/samba.templates. - - New file debian/samba.config. - - Re-worked debian/samba.postinst. - + Got rid of all /etc/samba/debian_config sillyness. - - remove /usr/sbin/sambaconfig; "dpkg-reconfigure samba" replaces - it. - - Removed debian/samba.prerm. - - Cleaned up /etc/init.d/samba. - + Added infrastructure for debconf. - + Got rid of all /etc/samba/debian_config sillyness. - + Got rid of /etc/samba/smbpasswd conversion stuff for - compatibility with versions of Samba < 2.0.0final-2. - (closes: #127959, #34408, #113594) - * make samba.postinst ignore the absence of /var/log/{s,n}mb*; - makes for a clean upgrade path. - * Building with MSDFS support (closes: #116793) - - -- Steve Langasek <vorlon@debian.org> Tue, 5 Mar 2002 14:14:33 -0600 - -samba (2.2.3a-1) unstable; urgency=low - - * New upstream version (closes: #135001) - * Potato builds were failing because debian/rules was not creating - debian/winbind/etc/logrotate.d/. A user having problems creating - Potato packages brought this to my attention. dh_installlogrotate - takes care of creating the directory for us, that's why we didn't - notice. - * Removed code that converts /etc/samba/smbpasswd from an ancient - format to the new format of Samba 2.0.0 and later. - Closes: #134375 - samba: postinst failed due to missing - /usr/bin/convert_smbpasswd. - * Re-organized FHS migration code in samba.postinst. Make sure we - don't fail when we move files that don't exist. - Closes: #133813 - samba: Install failed. - * Adding docs. to the libpam-smbpass package. - * Remove man pages for findsmb because we are not providing this - script. - Closes: #134181 - findsmb referenced, but not included. - * Removed replace.patch because it is now present upstream. - * Added patch from Jerry Carter to fix a problem when saving - document preferences for printing from NT clients. - * The real winbindd daemon is a forked process so we can't use - --make-pidfile when calling start-stop-daemon. Fixed - /etc/init.d/winbind to work around the issue. Thanks to - Lin Li <linl@xandros.com> for the patience and for reporting - the problems. Hopefully I got it right this time. - - -- Eloy A. Paris <peloy@debian.org> Wed, 20 Feb 2002 18:39:03 -0500 - -samba (2.2.3-6) unstable; urgency=low - - * Make sure there are actual files in /var/state/samba before trying - to move them (Closes: #133534, #133510). - * Fix up the 2.2.3 makefile so that pam_smbpass builds correctly - again. - - -- Steve Langasek <vorlon@debian.org> Tue, 12 Feb 2002 09:19:29 -0600 - -samba (2.2.3-5) unstable; urgency=low - - * Whoops, missed a spot on the samba.postinst -- will fail badly if - /var/state/samba/ no longer exists. Better get this fix into the - next upload. ;) (Closes: #133088) - * Regenerate configure only if it is older than configure.in. - * Fix smbd handling of network neighborhood lists, which was missed - in the FHS conversion (Closes: #133091) - - -- Eloy A. Paris <peloy@debian.org> Sat, 9 Feb 2002 16:37:57 -0500 - -samba (2.2.3-4) unstable; urgency=low - - * FHS cleanup; files in /var are now properly sorted according to - their nature. (Closes: #102101) - * Remove patches to source/configure, since we now call autoconf to - regenerate this file cleanly. - * lintian fixes: - - Create winbind.conffiles and add /etc/logrotate.d/winbind and - /etc/init.d/winbind to it. - - Use a relative symlink for /usr/lib/cups/backend/smb. - - Removal of a .cvsignore file in the samba-doc package. - * winbind.init fixes: - - Corrected name of the pid file (Steve) - - Make start-stop-daemon create a pid file for winbindd since it - does not create one on his own. - * #DEBHELPER# is not needed in samba.postinst because we are adding - manually everything that debhelper adds automatically. In fact, - since we are calling update-rc.d without standard paramaters I - think we can't use #DEBHELPER#. - * Fix fatal syntax error in samba.prerm. - - -- Steve Langasek <vorlon@debian.org> Thu, 7 Feb 2002 13:12:08 -0500 - -samba (2.2.3-3) unstable; urgency=low - - * work on lintian-cleanness in the package (wrong permissions, - maintainer scripts in need of debhelpering) - * /lib/security/pam_smbpass.so is now being included in the - libpam-smbpass package only, and not in both the libpam-smbpass and - samba packages (which was the case prior to 2.2.3-3.) - * Instead of making our patch scripts executable in the rules file - we run them through /bin/sh. - * New 'winbind' package that has all the winbind stuff that was in the - samba package in 2.2.3-2 and before. - * Added replace.patch: patch from Jeremy Allison to fix problems when - replacing or overwriting files in a Samba share. Patch was sent to - the samba mailing list. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Feb 2002 21:12:48 -0500 - -samba (2.2.3-2) unstable; urgency=low - - * add support to debian/scripts/{patch-source,unpatch-source} for - automatic updating and cleaning of <version.h>. This was a request - from the Samba Team: they wanted us to clearly mark our packages - so it is always known a user is running Samba with (possibly) - Debian-specific patches. - * Change init.d killscript link to K19samba, so we stop before autofs - (closes: 117327) - * Make our patch scripts executable in the rules file -- dpkg won't do - this for us (closes: #132415). - - -- Steve Langasek <vorlon@debian.org> Mon, 4 Feb 2002 09:51:00 -0600 - -samba (2.2.3-1) unstable; urgency=low - - * New upstream release (closes: #131228). - * Restructured build system that provides DBS-like separation of - patches - * Fix typo in smbfs description (closes: #116209). - * Use killall -q in logrotate.d script, to avoid spurious cron - emails (closes: #130100). - - -- Steve Langasek <vorlon@debian.org> Sat, 2 Feb 2002 19:56:18 -0500 - -samba (2.2.2-12) unstable; urgency=high - - * (Steve) Patch for source/client/client.c. - Closes: #86438 smbclient: Transfering several GB causes the average - speed to be messed up. - * Uploading with urgency=high to expedite the move from unstable - to testing because of the security problem fixed in -11. - - -- Eloy A. Paris <peloy@debian.org> Fri, 25 Jan 2002 22:31:12 -0500 - -samba (2.2.2-11) unstable; urgency=low - - * Building with --with-libsmbclient. We have created two new - packages: libsmbclient and libsmbclient-dev. Hopefully this - will help some people that want to add the capability of - speaking SMB to their applications. - Closes: #117132 - libsmbclient support library? - * (Steve) Make swat do the right thing when reading (parsing) - the saved preferences in smb.conf. - Closes: #55617 swat mutilates the linpopup message command. - * Updated README.Debian. Updated descriptions in debian/control. - * Remembered to bump up version number in source/include/version.h - (need to automate this or else I'll keep forgetting.) - * (Steve) one liner for source/web/diagnose.c. - Closes: #106976 - smbd/nmbd not running message with swat/linuxconf. - * Added '|| true' to the post-rotate script so logrotate doesn't - fail if either nmbd or smbd is not running. - Closes: #127897 - /etc/logrotate.d/samba fails if there is no smbd process. - * Fixed incorrect file locations in swat's man page and added a - Debian-specific note to /usr/share/doc/swat/README. - Closes: #71586 swat: needs documentation fixes for debian. - * smbmount in the smbfs package does not have the setuid bit set. - Apparently, smbmount uses libsmb without checking the environment. - Thanks to Christian Jaeger <christian.jaeger@sl.ethz.ch> for - finding the local root exploit. - * Applied old patch from Jerry) Carter" <jerry@samba.org> to correct - the following two problems in Samba 2.2.2: - - %U and %G could not be used in services names - in smb.conf. - - %G would fail to be expanded in an "include = ..." - line. - - -- Eloy A. Paris <peloy@debian.org> Sat, 19 Jan 2002 21:35:26 -0500 - -samba (2.2.2-10) unstable; urgency=low - - * (Steve) Add missing manual pages. - Closes: Bug#128928: missing manpages in smbfs. - - -- Eloy A. Paris <peloy@debian.org> Sun, 13 Jan 2002 14:39:55 -0500 - -samba (2.2.2-9) unstable; urgency=low - - * (Steve) Fix broken URL's in HTML docs. - Closes: Bug#17741: bad links in html docs (at last!!!) - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 13:37:07 -0500 - -samba (2.2.2-8) unstable; urgency=low - - * Added "Replaces: samba (<= 2.2.2-5)" to the smbclient section in - debian/control so rpcclient.1, which was in samba-2.2.2-5, does not - cause problems now that it is part of smbclient (>= 2.2.2-6). Closes: - Closes: Bug#128684: error upgrading smbclient in sid. - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 11:42:40 -0500 - -samba (2.2.2-7) unstable; urgency=low - - * (Steve) Patch to make behavior honor what the docs. say about "hosts allow" - taking precedence over "hosts deny". - Closes: Bug#49249: swat: error with host deny ?! - - -- Eloy A. Paris <peloy@debian.org> Thu, 10 Jan 2002 12:36:58 -0500 - -samba (2.2.2-6) unstable; urgency=low - - * (Steve) Adds manpage for rpcclient to the proper file, - removes smbtorture from the distro because this tool isn't intended for - widespread consumption. - Closes: #63057 - no manual page for smbtorture. - * (Steve) Removed -gnu from the configure arguments (--build, --host) in - debian/rules so config.sub is able to properly create the host and target - tuples. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Jan 2002 14:39:51 -0500 - -samba (2.2.2-5) unstable; urgency=low - - * Fixes from vorlon: - * Use /usr/bin/pager instead of more. - Closes: #125603: smbclient violates pager policy. - * Make /etc/logrotate.d/samba a conffile, send smbd and nmbd - a SIGHUP to have the log files reopened, fixes to - /etc/logrotate.d/samba. - Closes: #127897: log file rotation. - Closes: #118277: /etc/logrotate.d/samba not listed in conffiles. - * s/covert/convert/. - Closes: #121653 probable typo in install message. - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Jan 2002 03:14:58 -0500 - -samba (2.2.2-4) unstable; urgency=low - - * Applied patch from Steve to work around problem in glibc that affects the - HPPA architecure. The patch detects the error condition at configure time - and compiles without LFS support if necessary. - Closes: Bug#126763: samba completely broken on hppa. - * Including unicode_map.1251. - Closes: Bug#126719: samba-common: unicode_map.1251 missing. - * Updated smbd daemon version to match Debian package version. - Closes: Bug#127199: Package version and smbd daemon version don't match. - - -- Eloy A. Paris <peloy@debian.org> Mon, 31 Dec 2001 14:32:47 -0500 - -samba (2.2.2-3) unstable; urgency=low - - * Added some spaces in package description in debian/control. - Closes: #120730 - missing spaces in package description for nice - alignment. - * Spelling fixes. - Closes: #125328, #125329, #125330, #125367, #125365, #125403. - * Steve Langasek <vorlon@debian.org> is the co-maintainer of the Debian - Samba packages!!! Added him to the uploaders field in debian/control. - - -- Eloy A. Paris <peloy@debian.org> Tue, 18 Dec 2001 00:54:25 -0500 - -samba (2.2.2-2) unstable; urgency=low - - * Backed out changes to source/filename.c per Andrew Tridgell's request. - This changes were introduced in 2.2.1a-7 as an attempt to fix #47493. - Tridge found out that they break smbd. - * Changed version number in source/includes/version.h so it is clear that - this is a version of Samba packaged for Debian. This is another request from - Tridge and will help the Samba Team to get bogus bug reports. - * Added Samba-HOWTO-Collection.pdf and other README files to the - /usr/share/doc/<package>/ directories. - * Installing libnss_winbind.so and pam_winbind.so. - Closes: #116790: nss and pam modules for winbind missing. - * Removed user-emacs-settings from changelog. - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Oct 2001 19:16:26 -0500 - -samba (2.2.2-1) unstable; urgency=low - - * New upstream version. - * Temporary fix for #113763 (Steve Langasek) - * Quick hack to avoid smbmount reveal password length. Please note - that even with this hack there is a small window when password is - completely visible with 'ps aux'. There are other methods that should - be used to automate mounting of SMB shares. - Closes: #112195: smbmount-2.2.x reveals password length. - * Applied patch from Steve Langasek <vorlon@debian.org> to prevent - forcing use of setresuid() in Sparc. - Closes: #112779: samba build forces use of setresuid, which causes - smbd to fail on Sparc. - - -- Eloy A. Paris <peloy@debian.org> Mon, 15 Oct 2001 10:26:10 -0400 - -samba (2.2.1a-9) unstable; urgency=low - - * Replaced $(LD) with $(CC) all the way through source/Makefile. - Closes: #111036: ld shouldn't be used to link shlibs. - * s/\/bin\/mail/\/usr\/bin\/mail/ in smb.conf's man page (HTML and - sgml as well.) - Closes: #110963: smb.conf: mail should be /usr/bin/mail. - * Documented better smbclient's -W behavior. Patch from Steve - Langasek. - Closes: #53672: smbclient: -W flag is interpreted as domain, not - workgroup. - - -- Eloy A. Paris <peloy@debian.org> Tue, 4 Sep 2001 23:10:41 -0400 - -samba (2.2.1a-8) unstable; urgency=low - - * Set some reasonable default perms for the samba logdir (again, - thanks to vorlon :-) - Closes: #72529: insecure permissions on log files. - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 15:40:47 -0400 - -samba (2.2.1a-7) unstable; urgency=low - - * Another attempt at fixing #47493. Patch from Steve Langasek - <vorlon@netexpress.net>. Let's keep our fingers crossed Steve! - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 13:37:06 -0400 - -samba (2.2.1a-6) unstable; urgency=low - - * Backed out fix to #47493 introduced in 2.2.1a-4 as it is causing - smbd to die with signal 11 under some unidentified situations. - Closes: #109774: Latest debian version breaks printer driver download. - Closes: #109946: not all files appear in samba-exported directories. - * Another patch from Steve Langasek. This one adds quotes around - printer names for print systems it's reasonable for Debian to - support. Together with the patch in #29957 (see changelog for - 2.2.1a-4), this should take care of the problems with multi-word - printer names in Samba. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 21:12:27 -0400 - -samba (2.2.1a-5) unstable; urgency=low - - * Important changes that affect how Samba is built on Debian - machines are implemented in this release. All of this changes - were suggested by the energetic Steve Langasek <vorlon@debian.org>, - and his arguments were so sound and reasonable that I decided - to implement them. Here's Steve's original changelog: - - * Fix up the build system to avoid needing to run configure - as root to answer questions we already know the answers to. - * In the process, make surprising progress towards being able to - cross-compile the samba packages. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 01:08:06 -0400 - -samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. - Closes: #109317: smbfs: mistype in smbmount manpage. - * Included symlink to smbspool to better support CUPS printing. - Closes: #109509: include symlink for cups samba support. - * Applied patch from Steve Langasek <vorlon@netexpress.net> to - fix bug #29957. - Closes: #29957: samba strips trailing " from strings in smb.conf. - * First attempt at fixing #47493. Another patch from Steve "I want - a bug-free Samba" Langasek. - Closes: #47493: Samba doesn't handle ':' in dir names right. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Aug 2001 23:26:38 -0400 - -samba (2.2.1a-3) unstable; urgency=low - - * Steve Langasek <vorlon@netexpress.net> has been hard at work in - the last few days looking at the long list of open bugs filed - against the Samba packages. I don't know how to thank him. It's been - a pleasure working with Steve, and all the fixes, patches, etc. in - this release come from him. The bug list is greatly reduced thanks - to Steve's efforts. - * Steve's additions/modifications/patches/etc. are: - - New package that (libpam-smbpass) provides pam_smbpass. Before, this - was provided in another package but now the sources are part of - the Samba sources so we can start providing it from here. - Closes: #107043 - pam_smbpass now present in Samba source, - should be built from there - - Patch to source/smbd/service.c that allows admins to call - /bin/umount from the root postexec of a Samba share. - Closes: #40561 - samba pre/postexec commands do not work. - - Clear TMPDIR before starting smbd in /etc/init.d/samba. - Closes: #51295 - Problems with Samba and TMPDIR. - - Correction to documentation of "guest only". - Closes #38282 - "guest only" share still requires a password. - * Applied patch from Santiago Vila <sanvila@unex.es> to convert - /usr/sbin/mksmbpasswd from a shell script into a real awk script. - Sorry it took so long, Santiago; I hadn't realized you even - provided a patch :-) - Closes: #77891 - mksmbpasswd could be a real awk script. - * Updated description of the smbfs and smbclient packages. Also have - each package recommend the other. - Closes: #108650: Should suggest or recommend smbfs. - - -- Eloy A. Paris <peloy@debian.org> Mon, 13 Aug 2001 22:21:55 -0400 - -samba (2.2.1a-2) unstable; urgency=low - - * Build-depends: depend on debhelper (>=2.0.103). - Closes: #105795: Build-Depends are wrong. - * Run samba's preinst and postinst scripts without -e so failed commands - do not abort installation. - Closes: #106384: postinstall crashes abnormally. (And really closes - #104471.) - - -- Eloy A. Paris <peloy@debian.org> Thu, 26 Jul 2001 00:30:37 -0400 - -samba (2.2.1a-1) unstable; urgency=low - - * New upstream version. - * Make sure samba's postinst script exits with a zero status. - Closes: #104471: Samba postinst problem. - - -- Eloy A. Paris <peloy@debian.org> Thu, 12 Jul 2001 21:55:21 -0400 - -samba (2.2.1-1) unstable; urgency=low - - * New upstream version. - Closes: #103339: config.guess and config.sub update required. - Closes: #98518: Samba 2.2 can't act as PDC for NT4/W2K due to - incompatibility with PAM. - Closes: #97447: nmbd crashes due to bugs in DAVE 2.5.2. - Closes: #95777: Samba 2.2 is unable to join or authenticate against - Samba 2.2 PDC domain. - Closes: #68842: samba should use PAM for password changing (I - haven't personally tried this one, but it's been - advertised this works.) - Closes: #102506: PAM account checking fails. - Closes: #102518: Complains about unknown paramter "obey pam - restrictions" - Closes: #94774: Build failure on PARISC machines. - * Moved away from /etc/cron.weekly/samba for log file rotation. - Now using logrotate. - Closes: #95548: typo in /etc/cron.weekly/samba. - Closes: #74951: nmbd does not rename its log file. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Wed, 11 Jul 2001 00:44:14 -0400 - -samba (2.2.0.final.a-1) unstable; urgency=high - - * New upstream version (contains security fix from DSA-065-1.) - Closes: #97241: samba 2.2.0 fails to process hostnames in - "hosts allow" config line. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - Closes: #98365: addtosmbpass is missing from 2.2.0.final-2. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Sun, 24 Jun 2001 11:11:59 -0400 - -samba (2.2.0.final-2) unstable; urgency=low - - * Added libcupsys2-dev to Build-Depends. - * Samba depends now (again) on netbase so update-inetd is always - available for the Samba maintainer scripts. - Closes: #86063: Fails to uninstall if inetd is not installed. - * Updated source/config.{sub,guess} so ARM built doesn't fail. - Closes: #94480: config.sub out of date; can't build on arm. - Closes: #85801: config.sub/guess out of date. - * Not using brace expansion, i.e. {foo,bar} in any of the maintainers - scripts nor in debian/rules. - Closes: #88007: samba postrm has is not POSIX sh compliant. - - -- Eloy A. Paris <peloy@debian.org> Sat, 21 Apr 2001 17:27:18 -0400 - -samba (2.2.0.final-1) unstable; urgency=low - - * New upstream release. Lots of new things. See WHATSNEW.txt. - * Goofy version number because of my stupidity when assigning version - numbers to the CVS packages I have been uploading to experimental. - Will be fixed when 2.2.1 is released. I've no doubts a 2.2.1 release - will follow soon. - - -- Eloy A. Paris <peloy@debian.org> Tue, 17 Apr 2001 22:58:14 -0400 - -samba (2.2.0.cvs20010416-1) experimental; urgency=low - - * CVS update. - - -- Eloy A. Paris <peloy@debian.org> Mon, 16 Apr 2001 21:25:15 -0400 - -samba (2.2.0.cvs20010410-1) experimental; urgency=low - - * CVS update. - * Added libreadline4-dev to Build-Depends. - - -- Eloy A. Paris <peloy@debian.org> Tue, 10 Apr 2001 16:53:45 -0400 - -samba (2.2.0.cvs20010407-1) experimental; urgency=low - - * CVS update. Includes what is in 2.2.0alpha3. - - -- Eloy A. Paris <peloy@debian.org> Sat, 7 Apr 2001 16:00:33 -0400 - -samba (2.2.0.cvs20010316-1) experimental; urgency=low - - * Started working on Samba 2.2.0. Using the SAMBA_2_2_0 branch - from Samba CVS. - * Not compiling rpctorture as it has compile errors. Change in - debian/rules. - * Removed Linux kernel 2.0.x and smbfs compatibility baggage. Now - the smbfs does not support 2.0.x kernels; a kernel > 2.2.x is - needed to use smbfs. Updated debian/control, debian/rules and - README.Debian to reflect this change. - * Added to swat a versioned dependency on samba (so a user is forced to - install a new version of swat each time a new version of samba is - installed.) - - -- Eloy A. Paris <peloy@debian.org> Sun, 18 Mar 2001 14:21:14 -0500 - -samba (2.0.7-5) unstable; urgency=medium - - * Transition from suidmanager to dpkg-statoverride. - - -- Eloy A. Paris <peloy@debian.org> Thu, 18 Jan 2001 23:51:56 -0500 - -samba (2.0.7-4) unstable; urgency=medium - - * Applied Urban Widmark <urban@teststation.com> fixes to smbmount. Urban - is the maintainer of the smbfs in the kernel and of the userland - utilities. - * Links to HTML documents are correct now. - Closes: #69439: swat: Broken help file symlinks - Closes: #72615: samba-doc directory changed: removed htmldocs from path - Closes: #75847: swat: Wrong symlink - Closes: #66857: Wrong links to html documents. - Closes: #77912: misplaced documentation symlinks for swat - * Building Samba with CUPS support. For this I reverted the change to - source/configure.in that I did in 2.0.7-3 and re-ran autoconf. - Closes: #59038: samba: not compiled with cups support. - * Fix against previous known/unknown user time difference patch to swat - (make username / password lookups take the same time.) Remove CGI - logging code in Swat. - Closes: #76341 - Security holes in swat - * Updated Build-depends. - * Updated debian/copyright to refer to the correct location of the GPL. - * debian/rules: changed DESTDIR to `pwd`/debian/samba (was - `pwd`/debian/tmp.) - * debian/rules: added '--sourcedir=debian/samba' to dh_movefiles (for some - strange reason dh_installdirs is not creating debian/tmp/ so I needed - to tweak everything to install stuff in debian/samba rather than in - debian/tmp.) - * debian/control: changed section of samba-docs to 'doc' (was 'docs') - * Using relative symlinks in /usr/share/samba/swat/ (changed debian/rules - and source/scripts/installswat.sh.) - * Fixed (by tweaking debian/rules) - /usr/bin/{smbmnt,smbumount-2.*,smbmount-2.*} to be suid. - * Added "Provides: samba-client" to smbclient's section in control. - Closes: #71143: smbclient: Smbclient should provide samba-client. - * Fix for desired_access being zero in map_share_mode() (patch to - source/smbd/nttrans.c.) Thanks to Gary Wilson - <wilsong@sergievsky.cpmc.columbia.edu> for bringing this patch to my - attention. - * Hacked source/lib/util_sec.c so smbd works fine in both 2.0.x and - 2.2.x kernels even when the build is done in a system running - a 2.2.x kernel. - Closes: #78858: samba-common: samba2.0.7 needs kernel 2.2.x but - doesnt depend on it. - Closes: #72758: README.Debian should comment on 2.0.x kernels. - Closes: #56935: Samba 2.0.6 and Kernel 2.0.x. - Closes: #58126: Samba 2.0.6 and Kernel 2.0.x -- more info. - Closes: #60580: samba: failed to set gid. - Closes: #64280: Samba panics, can't set gid. - Closes: #66816: Must deal with brokenness under 2.0.x. - Closes: #67682: potatoe samba 2.0.7-3 out of order, 2.0.5a-1 OK. - Closes: #69735: PANIC: failed to set gid - Closes: #66122: "smbclient -L localhost -U%" returns with "tree - connect failed: code 0". - Closes: #57637: Samba says tree connect error. - Closes: #58015: potato samba wins support is broken. - * Fixed comments in sample smb.conf to point to the correct location. - Closes: #69578: comments in smb.conf points to wrong path. - * Move codepages from /etc/samba/codepages/ to - /usr/share/samba/codepages/. - Closes: #63813: samba; codepages should go in /usr/lib. - * Moved /var/samba/ to /var/state/samba/. - Closes: #49011: samba package not FHS compliant. - * Hacked source/configure.in (and re-ran autoconf) so yp_get_default_domain() - is found. - Closes: #44558: netgroup support missing in samba 2.0.5a-1. - * /etc/init.d/samba was calling start-stop-daemon with both --pidfile and - --exec. Got rid of --exec so --pidfile works. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Jan 2001 00:15:57 -0500 - -samba (2.0.7-3) frozen unstable; urgency=high - - * Release manager: this closes a RC bug. - * Commented out the section in source/configure.in that auto-detects - CUPS support and then ran autoconf to generate a new configure - script. This was done to prevent machines that have libcupsys-dev - installed from detecting CUPS support and adding an unwanted - dependency on libcupsys. This way the whole printing system - won't break on upgrades. CUPS support should be added after - Potato is released. - Closes: #65185: samba-common: Upgrading removes printing system. - Closes: #64496: smbfs: smbfs on powerpc has a dependency on cupsys. - * Updated README.debian. - Closes: #64594: Old README.Debian in /usr/share/doc/samba. - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 Jun 2000 19:16:04 -0400 - -samba (2.0.7-2) frozen unstable; urgency=high - - * Release manager: this closes RC bug #63839 that prevents Samba - to be built from source. - * Fixed a stupid typo in debian/rules that was preventing Samba - to be built from source. - Closes: #63839: samba_2.0.7-1(frozen): build error (SAMBABOOK dir) - * I forgot to mention that O'Reilly's book "Using Samba" was donated - to the Open Source community. The book was included in Samba 2.0.7 - in HTML format and is part of the Debian Samba package since - Samba 2.0.7-1. - * In Samba 2.0.7-1, the "Using Samba" book and a number of HTML help - files were supposed to be provided in both the swat and the samba-doc - packages. This duplication was a waste of space. Starting with - Samba 2.0.7-2, swat recommends samba-doc and the book and the HTML - files are included only in samba-doc, and are accessed via symlinks - from within swat. - Closes: #58810: superfluous files in swat? - * Added a 'echo "."' to /etc/init.d/samba in the reload) section. - Closes: #63394: "echo ." missing in reload section of init.d script - * Fixed typo in docs/htmldocs/using_samba/ch06_05.html. - Closes: #64344: typo "encrypted passwords" - * Cleaned up samba's postrm script so important common files aren't - deleted when samba is purged. Created a samba-common.postrm script. - Closes: #62675: purging samba removes /etc/samba/smb.conf. - Closes: #63386: samba --purge removes /etc/samba dir even though - smbclient/smbfs/samba-common packages are still installed - - -- Eloy A. Paris <peloy@debian.org> Wed, 3 May 2000 02:42:07 -0400 - -samba (2.0.7-1) frozen unstable; urgency=low - - * New upstream version. Dear Release Manager: please allow this - package to go to frozen as it contains fixes to a _lot_ of problems. - You can take a look at all the problems fixed by this release in - the official upstream announcement at - http://us1.samba.org/samba/whatsnew/samba-2.0.7.html. - * Added --with-utmp to add utmp support to smbd (this is new in Samba - 2.0.7) - * Closes: #62148 - samba not rotating filled logs. - * Closes: #56711: Samba doesn't manage well long share name (please note - that it's possible to connect to shares with names longer than - 14 characters but the share will be listed with a name truncated to - 13 characters.) - * Closes: #51752 - NT DOMAIN - NET USE * /HOME not mapping (error 67). - Closes: #50907 - logon path not working. - This is not a bug, it's just Samba doing the same thing an NT server - does. See WHATSNEW.txt and smb.conf's man page for details. - * Closes: #48497 - error executing smbsh in debian-potato. (smbwrapper - is not supported anymore.) - * Closes: #58994 swat: typo in swat description. - * Closes: #45931 - Samba dies with SIGILL on startup. (Hardware - problems, person that reported the bug never came back.) - Closes: #54398 - smbadduser fails, looks for ypcat. - * Fixed swat's man page to include Debian specific installation - instructions. There's not necessary to edit /etc/services or - /etc/inetd.conf. - (Closes: #58616 - incomplete install config && incorrect installation - instructions.) - * s/SBINDIR/\"/usr/sbin\"/g in source/web/startstop.c to prevent swat - to look for smbd and nmbd in the wrong place when requested to start or - stop smbd or nmbd. - (Closes: #55028 - swat can't start samba servers.) - * Closes: #37274: smbclient does not honour pot. (Tested and seems to be - working now.) - * Not confirmed, but should fix #56699, #62185, #56247, #52218, #43492, - #50479, #39818, #54383, #59411. - (please re-open any of this if the problem still exists - I was unable - to confirm any of this because I could never reproduce them.) - Closes: #56699 - Samba's nmbd causes random kernel oops several - times in a row. - Closes: #62185 - nmbd's forking until no more file descriptors are - available. - Closes: #56247 - session setup failed: ERRSRV - ERRbadpw. - Closes: #52218 - Either wins proxy does not work, or I don't understand - it. - Closes: #43492 - intermittent problem changing password. - Closes: #50479 - Can't access windows 2000 shares with samba. - Closes: #39818 - samba-common: Upgrading Samba from the Slink version. - Closes: #54383 - samba-common: Missing /etc/smb.conf. - Closes: #59411 - smbclient: cannot browse Win2k shares. - - -- Eloy A. Paris <peloy@debian.org> Thu, 27 Apr 2000 16:07:45 -0400 - -samba (2.0.6-5) frozen unstable; urgency=low - - * Oppsss! samba-common doesn't depend on libcupsys1 so the binaries - in this package are broken unless libcupsys1 is installed. - samba-common has a "grave" bug because of this. Instead of adding - libcupsys1 to the Depends: list of each package in debian/control - I investigated why dh_shlibs was not picking the dependency - automatically. It turns out that it's probably a bug in libcupsys1 - because the format of its shlibs file is not correct. I fixed that - file (/var/lib/dpkg/info/libcupsys1.shlibs) and now dependencies are - picked correctly. I'll talk to the libcupsys1 maintainer. - - I think the addition of CUPS support to Samba is a big change that - should not go into Frozen. So, I decided to back up the addition - of CUPS support I did in 2.0.6-4 to minimize problems. I'll add - CUPS support again when I start working on Samba for Woody. - (Closes: #59337 - samba-common has a missing dependency) - - -- Eloy A. Paris <peloy@debian.org> Wed, 1 Mar 2000 08:40:02 -0500 - -samba (2.0.6-4) frozen unstable; urgency=low - - * It seems that sometimes nmbd or smbd are not killed when upgrading. - I think it is because in samba's prerm script I was calling - start-stop-daemon with the --pidfile switch and in old versions of - Samba the nmbd and smbd daemons did not store their PIDs in a file in - /var/samba/. I changed debian/samba.prerm so the existence of the - PID files is checked before calling "start-stop-daemon --pidfile ..." - If the PID files do not exist then start-stop-daemon is called - without the --pidfile parameter. - (Closes: #58058 - upgrade from slink went badly) - * Fixed typo in description of swat package in debian/control. - * Installed libcupsys1-dev so the configure script picks up CUPS - and Samba is compiled with CUPS support. Also added libcupsys1 to - the Depends: list of package samba in debian/control. - (Closes: #59038 - samba not compiled with cups support) - * Added a small paragraph to debian/README.debian warning about possible - problems with the WINS code in Samba 2.0.6. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Feb 2000 14:00:42 -0500 - -samba (2.0.6-3) frozen unstable; urgency=low - - * Applied patch posted by Jeremy Allison to the samba mailing list - that should take care of the internal errors reported in bug #52698 - (release-critical). Wichert: please test as I never could reproduce - it here. - (Closes: #52698 - samba gets interbal errors) - * Moved samba-docs to the 'docs' section. - (Closes: #51077 - samba-doc: wrong section) - * Added reload capability to /etc/init.d/samba (only for smbd because - nmbd does not support reloading after receiving a signal). - (Closes: #50954 - patch to add reload support to /etc/init.d/samba) - * Corrected "passwd chat" parameter in sample /etc/samba/smb.conf so - Unix password syncronization works with the passwd program currently - in Potato. Thanks to Augustin Luton <aluton@hybrigenics.fr> for - the correct chat script. - * Stole source/lib/util_sec.c from the CVS tree of what will become - Samba 2.0.7 or whatever so we can use the same binaries under - both 2.0.x and 2.2.x kernels. - (Closes: #51331 - PANIC: failed to set gid) - * smbadduser is now provided as an example and it's customized for Debian. - I am not providing this script in /usr/sbin/ because then I would need - a dependency on csh, something that I don't want to do. - (Closes: #51697, #54052) - * Fixed the short description of the smbfs package in debian/control. - (Closes: 53534 - one-line description out of date). - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Nov 1999 16:32:12 -0500 - -samba (2.0.6-2) unstable; urgency=low - - * samba-common now depends on libpam-modules (not on libpam-pwdb, which - I have been told is obsolete). I modified /etc/pam.d/samba accordingly - to reflect the change. - (Closes: Bug#50722: pam pwdb dependence?). - * The old /etc/pam.d/samba file which had references to pam_pwdb caused - smbd to die with a signal 11. The new /etc/pam.d/samba file fixes - this problem. - (Closes: #50876, #50838, #50698) - * Compiled with syslog support (use at your own risk: syslog support - is still experimental in Samba). I added the parameters "syslog = 0" - and "syslog only = no" to the sample smb.conf to avoid pestering - users that do not want Samba to log through syslog. - (Closes: Bug#50703 - syslog only option doesn't work) - * Removed the stupid code in the smbmount wrapper script that tries - to load the smbfs module if smbfs is not listed in /proc/filesystems. - (Closes: Bug#50759 - Non-root can't run smbmount if SMBFS is compiled - as a module in the kernel) - * Added /bin/mount.smb as a symlink pointing to /usr/bin/smbmount so - 'mount -t smb ...' works just as 'mount -t smbfs ...'. - (Closes: Bug#50763 - 'mount -t smb' doesn't work) - - -- Eloy A. Paris <peloy@debian.org> Sat, 20 Nov 1999 18:53:35 -0500 - -samba (2.0.6-1) unstable; urgency=low - - * Samba 2.0.6 has been released. This is the first try of the Debian - Samba packages. I know for sure that smbd won't work properly on - 2.0.x kernels because the patch that Wichert sent me does not apply - to the new source/lib/util_sec.c in Samba 2.0.6. That file was - completely re-written by Tridge. - * Updated README.Debian. - * A new client utility called smbspool appeared in Samba 2.0.6. I added - this utility to the smbclient package, although I haven't tried it yet. - * Added the symlink /sbin/mount.smbfs that points to /usr/bin/smbmount. - This is to be able to type "mouont -t smbfs ...". This symlink goes - in the smbfs package, of course. - * This new release should close the following bugs (some of these - are fixed for sure in this new upstream release, some others I could - not reproduce but I believe they are fixed if they were real bugs. - As always, please feel free to re-open the bugs if the problem is not - solved). - Closes: Bug#33240: icmp mask needs a bug workaround. - Closes: Bug#37692: samba: Has problems detecting interfaces. - Closes: Bug#38988: samba: Truly bizzare behavour from nmbd. - Closes: Bug#46432: samba-2.0.5a-2: nmbd does not appear to broadcast - properly. - Closes: Bug#44131: smbfs: no longer possible to set file and - directory-modes. - Closes: Bug#46992: smbmount-2.2.x manpage wrong. - Closes: Bug#42335: smbfs: missing options from the new 2.2.x commandline. - Closes: Bug#46605: smbmnt segfaults. - Closes: Bug#48186: smbmount. - Closes: Bug#38040: smbfs: Please add /sbin/mount.smb [included]. - Closes: Bug#47332: smbmount: could -f and -P be added back? - * Samba has been compiled with PAM support (closes: Bug#39512 - samba PAM - module). To succesfully add PAM support, I created /etc/pam.d/samba and - added this file as a conffile for the samba-common package. I also made - samba-common depend on libpam-pwdb. - * Added simple man pages for the wrapper scripts smbmount and smbmount. - (Closes: Bug#44705 - Missing smbmount man page) - * Installed libreadlineg2-dev in my system so smbclient now has a - "history" command and libreadline support :-) - * This time I did add a check to the smbmount wrapper script to see if - the kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. I mentioned in the changelog - for samba-2.0.5a-3 that I did this but I forgot at the end. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Nov 1999 12:08:15 -0500 - -samba (2.0.5a-5) unstable; urgency=low - - * I am sorry to report that the smbwrapper package is gone for the - moment. The reason for this is twofold: first of all, smbwrapper - is completely broken in Samba-2.0.5a (it compiles but it doesn't - run) and in the upcoming Samba-2.0.6 it doesn't even compile. Second, - when I asked Andrew Tridgell (father of Samba) about the state of - smbwrapper he told me that Ulrich Drepper (head of the glibc project) - broke on purpose the glibc stuff in which smbwrapper is based. - Consequently, Tridge recommended me to compile Samba without - support for smbwrapper. When, I have no idea. Sorry folks. Here is - the original message I received from Andrew: - - > 1) 2.0.5a's smbwrapper doesn't work under glibc2.1, and pre-2.0.6's - > smbwrapper doesn't even compile under glibc2.1. - - yep, Ulrich deliberately broke it. It won't get fixed till glibc - allows the sorts of games it plays to work again. I suggest you turn - it off in your build scripts until that gets sorted out. - - * Swat's file are now in /usr/share/samba/ instead of - /usr/lib/samba/ (bug #49011). - * Man pages now in /usr/share/man/ instead of /usr/man/ (bug #49011). - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Nov 1999 12:59:13 -0500 - -samba (2.0.5a-4) unstable; urgency=low - - * Applied patch from our fearless leader (Wichert) to fix the darn bug - that prevents Samba to work on 2.0.x kernels if it was compiled - in a system running a 2.2.x kernel. This closes #40645 (build uses - setresuid which doesn't work under 2.0.34 (does apparently under - 2.2.x) ). - * Fixed the entry that swat's postinst script adds to /etc/inetd.conf - so it is '#<off># swat\t\tstream\ttcp\tnowait.400 ...' instead of - '#<off>#swat\t\tstream\ttcp\tnowait.400 ...'. The old way caused - 'update-inetd --enable swat' to leave the entry for swat disabled. - Thanks to Dave Burchell <burchell@inetnebr.com> for finding out - this problem. This closes #48762 (swat uses non-standard syntax to - comment out inetd.conf entry). - * /usr/sbin/swat does not think anymore that the smbd daemon lives - in /usr/local/samba/bin/. To fix this I am running now source/configure - with "--prefix=/usr --exec-prefix=/usr". This closes #47716 (samba - 'swat' fails: incorrect hardwired path in the binary). - - -- Eloy A. Paris <peloy@debian.org> Sun, 31 Oct 1999 03:42:38 -0500 - -samba (2.0.5a-3) unstable; urgency=low - - * I am pretty darn busy with my MBA, I apologize for the long time it's - taking to squash bugs in the Samba packages. - * Built with debhelper v2 for FHS compliancy. Changed a couple of - things in debian/rules to accomodate for the new place for the docs. - I also had to change debian/{samba.postinst,samba.prerm,swat.postinst} - to make sure that the symlink from /usr/doc/xxx exists and points to - /usr/share/doc/xxx (the reason for this is that I am not letting - debhelper to create these scripts for me automatically). - * Built with latest libc6. - * smbfs: finally, the nasty bug that causes smbmount to die after - a while is gone thanks to Ben Tilly <Ben_Tilly@trepp.com>. - The problem was just a typo in source/client/smbmount.c. - This closes grave bug #42764 (smbmount dies) and #43341 - (smbfs-2.2.x won't function after a while). - * Fixed the smbmount wrapper script to eliminate a bashism (closes - #45202 - "wrapper scripts use $* instead of "$@") and to recognize - 2.3.x and 2.4.x kernels (closes #47688 - "smbfs: does not recognize - kernel 2.3.x"). - * Added a check to the smbmount wrapper script to see if the - kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. - * swat's man page is now part of the swat package, not of the samba - package. This closes #44808 (Samba has a man page for swat, but - the binary is not included). - * The interface program smbrun is not longer needed by smbd because - of the availability of execl() under Linux. Because of this, the - smbrun is not even being compiled. Since there is no need for smbrun - now, the smbrun man page was taken out of the samba package. This - closes #45266 (/usr/bin/smbrun missing). - * smbpasswd is now part of the samba-common package, and not part of - the samba package. This is to let administrators that do not want - to install a full Samba server administer passwords in remote - machines. This closes bug #42624 (smbpasswd should be included in - smbclient). This bug report also suggests that swat becomes part of - the samba package, that smbfs becomes part of the smbclient package, - and that the binary smbpasswd becomes part of the smbclient package. - I moved smbpasswd to the samba-common package but I am reluctant to - do the other things the bug report suggests. - * In order to keep dpkg happy when moving smbpasswd from the samba - package to samba-common, I had to add a "Replaces: samba (<= 2.0.5a-2)" - in the control section of the samba-common package and a - "Replaces: samba-common (<= 2.0.5a-2)" in the control section of the - samba package (in debian.control). - * Samba is now being compiled with the "--with-netatalk" option. This - closes #47480 (Could samba be compiled with the --with-netatalk option). - * All packages that depend on samba-common have a versioned dependency - now. This was accomplished by adding "(= ${Source-Version})" to the - relevant sections of debian/control. Thanks t Antti-Juhani Kaijanaho - <gaia@iki.fi> for the hint. This closes #42985 (samba should probably - have a versioned depends on samba-common). - * Made sure the file docs/textdocs/DIAGNOSIS.txt gets installed in all - the Samba packages. This closes bug #42049 (no DIAGNOSTICS.txt file). - * Added the smbadduser helper script to the samba package. This closes - #44480 (Samba doesn't come with the smbadduser program). - * Applied patch from szasz@triton.sch.bme.hu that prevents smbmount - to leave an entry in /etc/mtab for a share that could not be mounted - because of invalid user of password. The patch also allows smbumount - to unmount the share in the event that something goes wrong with the - smbmount process. This closes bug #48613 (Mount/umount problems + - patch) as well as #44130 (failed mount is still mounted). - * smbmount-2.2.x is now setuid root. This is needed for the patch - applied above to be effective. If smbmount-2.2.x is not setuid root - then an entry will be left in /etc/mtab even when the mount - fails. I had to add "usr/bin/smbmount-2.2.x" to debian/smbfs.suid - for this to work. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Oct 1999 10:36:13 -0400 - -samba (2.0.5a-2) unstable; urgency=low - - * This version is basically the same as 2.0.5a-1 but it was compiled - on a Potato system with glibc2.1. See below the change log for 2.0.5a-1 - for more information. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:25:29 -0400 - -samba (2.0.5a-1) stable; urgency=high - - * I'm back from the Honey Moon. We are pretty busy because we are moving - to Pittsburgh (from Caracas, Venezuela) in aprox. 24 hours and we still - have plenty of things to pack and to do. Samba 2.0.5 was released - while I was in the Honey Moon and it is just now (almost 3 AM) when - I have time to package it. - * Because of the security problems fixed in 2.0.5, this upload goes - to both stable and unstable (the Security Team asked for this). - * This release (2.0.5a-1) was compiled on a Slink system. 2.0.5a-2 will - be compiled on a Potato system. - * Added a "Replaces: samba (<= 1.9.18p10-7)" to the samba-common - section in debian/control (as suggested by Steve Haslam - <araqnid@debian.org>) to fix the problems that appear when upgrading - from the Samba package in Slink. Please test this as I am completely - unable to do so. This should fix bug #39818 (Upgrading Samba from the - Slink version). - * Removed the hacks to the autoconf stuff that I added to 2.0.4b-2 in - order to have defined several socket options when compiling with - Linux 2.2.x kernel headers - the fix is now upstream. - * Finally!!! smbmount was re-written (thanks Tridge :-) to use a command - line syntax similar to the one used by the old smbmount (for 2.0.x - kernels). This means that the wrapper script is no longer necessary - so I removed it. In its place there is a simple wrapper script that - calls smbmount-2.0.x or smbmount-2.2.x depending on the kernel that is - running. - * Because of the wedding, the Honey Moon, and our move to Pittsburgh, - I can't work on fixing other bugs in this release. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:18:51 -0400 - -samba (2.0.4b-3) unstable; urgency=low - - * Stupid mistake: I forgot to add /usr/bin/smbumount to debian/smbfs.files - and because of this /usr/bin/smbumount was part of the samba package - instead of part of the smbfs package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Jul 1999 01:51:24 -0400 - -samba (2.0.4b-2) unstable; urgency=low - - * Dark (and archive maintainers): please remove from Potato the smbfsx - binary package and also the old source package for smbfs. smbfs and - smbfsx have been merged starting with this version. - * Merged the old smbfs package with Samba. Now there is only one package - for the smbfs utilities and is called "smbfs". The package smbfsx - does not exist any more and this new smbfs package must be used - for both 2.0.x and > 2.1.x kernels. - * A wrapper script was added to handle the syntax change in smbmount - in the new smbfs utilities (required for kernels > 2.1.70). The - home page for this script is http://www.wittsend.com/mhw/smbmount.html. - Please _note_ that this will change (for good) in Samba 2.0.5 :-) - * Added debian/smbumount.sh. It's another wrapper that calls smbumount-2.2.x - or smbumount-2.0.x depending on the kernel currently running. - * Not using -t for savelog in cron.weekly script. - * Recompiled without libreadlineg-dev (Samba does not seem to be using - it so unnecessary dependencies are produced). - * glibc2.1 build. - * Removed smbpasswd.8 man page from the debian/ directory because it is - now being provided upstream. - * Got rid of the ugly hack I put in source/lib/util_sock.c to have - IPTOS_LOWDELAY and IPTOS_THROUGHPUT defined. Now I patched the - autoconf stuff to #include <netinet/ip.h>. I've sent the patch to - Jeremy Allison so we have this upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Jun 1999 17:47:19 -0400 - -samba (2.0.4b-1) unstable; urgency=low - - * New upstream release. This release fixes the following Debian bugs: - #33838 (Amanda/ Samba 2.0.2 and backing up large filesystems) and - #33867 (Amanda 2.4.1 and Samba 2.0.2 and large filesystems). Jeremy - Allison released Samba 2.0.4 and found out that there were a couple - of minor bugs so he released 2.0.4a. Then he found out about more - serious bugs and released 2.0.4b. I have built this package several - times between yesterday and today because of this. Now I am releasing - the Debian packages for Samba with what I believe will be the latest - release the Samba Team will make at least in the next 4 days (Jeremy - is taking a short vacation). - * Still compiling against glibc2.0 (sorry about that :-) - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. It looks - now in /usr/lib/samba/ for this file. This fixes #32971, #32989, - #33278, #34911 and #36317. - * Made smbfsx depend on samba-common because smbfsx uses /etc/samba/smb.conf - and /etc/samba/codepages/. This fixes #33128 (smbmount complains about - missing /etc/smb.conf). - * Package swat does not depend on httpd anymore (there's no need to). - This fixes #35795 (swat requires httpd). - * Renamed smbmount-2.1.x and smbumount-2.1.x to smbmount-2.2.x and - smbumount-2.2.x. Same applies to the man pages. - * Changed minor type in smbmount's man page (changed "\"" by "\'"). This - fixes #34070 (wrong quotes in manpage). - * Used Fabrizio Polacco's <fpolacco@icenet.fi> procedure to create the - Debian package for Samba. This closes #35781 (samba has no pristine - source). - * Changes to /etc/cron.weely/samba: rotate /var/log/{nmb,smb}.old only - if the size of either is different than 0. Also, added comments at the - beginning of this script to explain how rotation of log files works in - Samba. Thanks to ujr@physik.phy.tu-dresden.de (Ulf Jaenicke-Roessler) - for the suggestions. This closes #37490 (cron.weekly script rotates not - used [sn]mb.old files). As I side effect, this should also close - #31462 (still trouble with /etc/cron.weekly/samba). - * Check for old /etc/pam.d/samba file which is not provided by this version - of the Debian Samba package but was provided in older versions. If this - file exists we delete it. We check for this in the postinst. This closes - #37356 (samba put stuff in pam.d that pam complains about) and #34312 - (libpam0g: questions during upgrade). - * Make sure the mode of /etc/samba/smbpasswd is set to 600. This is done - in the postinst script. This closes #35730 (Security problem with - /etc/samba/smbpasswd when upgrading from samba 1.9.18p8-2 to 2.0.3-1). - * I have just checked and it looks like #28748 (smbfsx doesn't "return ") - has been fixed. This might have been fixed since a long time ago. - * Long long standing bug #18488 (smbclient: internal tar is broken) is - closed in this release of Samba. The bug might have been closed for a - long long time, but I did not check for this before. - * Temporary fix to the annoying "Unknown socket option IPTOS_LOWDELAY" - message. This fixes #33698 (socket option IPTOS_LOWDELAY no longer works), - #34148 (warnings from smbd) and #35333 (samba warnings). - - -- Eloy A. Paris <peloy@debian.org> Thu, 20 May 1999 00:35:57 -0400 - -samba (2.0.3-1) unstable; urgency=low - - * New upstream version. - * Removed the convert_smbpasswd.pl program I created and put in - /usr/doc/samba/ because there's a convert_smbpasswd script in the - upstream sources that does the same thing. I modified the postinst - script to use this script instead of the one I created. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Feb 1999 01:35:37 -0400 - -samba (2.0.2-2) unstable; urgency=low - - * Updated the README.Debian file. - * Updated the description of the samba package in the control file. - * The binaries smbmnt and smbumount-2.1.x in the smbfsx package are now - installed setuid root as they should be. This was done by doing a - a "chmod u+s" for each binary in debian/rules and by creating the - file debian/smbfsx.suid. - * Minor patch to source/client/smbumount.c to allow normal users - to umount what they have mounted (problem was a kernel vs. libc6 - size mismatch). I sent the patch upstream. - * Created debian/smbwrapper.dirs so the directory /usr/lib/samba/ is - created. - * Modified debian/rules to move smbwrapper.so from debian/tmp/usr/bin/ to - debian/smbwrapper/usr/lib/samba/. - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 18:11:34 -0400 - -samba (2.0.2-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 01:35:51 -0400 - -samba (2.0.1-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 6 Feb 1999 06:51:18 -0400 - -samba (2.0.0final-4) unstable; urgency=low - - * The samba postinst made an unwarranted assumption that the file - /etc/samba/smbpasswd exists. If the file did not exist (which is - perfectly valid) the postinst will fail. This fixes #32953. - - -- Eloy A. Paris <peloy@debian.org> Fri, 5 Feb 1999 23:32:46 -0400 - -samba (2.0.0final-3) unstable; urgency=low - - * Added to debian/control a "Depends: ${shlibs:Depends}" line for the - samba-common package so dependencies for this package are set - correctly (thanks to Dark for pointing this out). - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Feb 1999 09:45:21 -0400 - -samba (2.0.0final-2) unstable; urgency=low - - * Finally!!! The first upload to unstable. Sorry for the delay folks - but I have been quite busy lately :-) Another reason for the delay - is that I wanted to ease the migration from Samba 1.9.18p10 and - before to Samba 2.0.0. I changed the location of the config. files - from /etc/ to /etc/samba/ and this made things a little bit harder. - * This package needs 2.2 kernel headers to compile (well, this is - true for the smbfsx package, all others compile fine with 2.0 kernel - headers). - * Created a preinst script for the samba package to take care of the - location migration of smb.conf (from /etc/ to /etc/samba/). The - preinst script also takes care of moving /etc/smbpasswd to its new - location (/etc/samba/). - * Created postinst and postrm scripts to add/remove an entry for swat - in /etc/inetd.conf. - * I had forgotten to install the sambaconfig script so I changed - debian/rules to install this script. - * Added a postrm script for the samba package (I had forgotten to add - this script to the new Samba packages after the migration from 1.9.18 - to 2.0.0). - * Created a small Perl script that is called from the samba postinst - to convert the smbpasswd from the old format used in version prior - to 2.0.0 to the new one used in 2.0.0 and beyond. - * The upgrade process should be automatically now. Please let me know - of any problems you encounter. - - -- Eloy A. Paris <peloy@debian.org> Sat, 23 Jan 1999 09:34:10 -0400 - -samba (2.0.0final-1) experimental; urgency=low - - * Finally!!! Samba 2.0.0 is here! I am not uploading to unstable - because I still have to work out the migration from the old - samba packages to the new ones. I also need to work more on the - new swat package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Jan 1999 22:40:02 -0400 - -samba (2.0.0beta5-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Jan 1999 00:37:57 -0400 - -samba (2.0.0beta4-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Wed, 23 Dec 1998 18:37:45 -0400 - -samba (2.0.0beta3-1) experimental; urgency=low - - * New upstream version. - * I have just realized that the documentation patches (for man pages) - that I used for the 1.9.18 release are not longer necessary because - there was a major re-write of all the Samba documentation that added - the missing bits of information. So, I have just removed these minor - patches. - - -- Eloy A. Paris <peloy@debian.org> Tue, 8 Dec 1998 12:00:30 -0400 - -samba (2.0.0beta2-1) experimental; urgency=low - - * New upstream version. - * This new version fixes the potential security problem that - was posted to debian-private (using the "message command" parameter - to execute arbitrary commands from messages sent from LinPopUp). - * Changed /etc/init.d/samba to use one of the variables stored in - /etc/samba/debian_config to know how Samba is being run (from inetd or - as daemons) instead of grepping /etc/inetd.conf which may not exist - if the user is running xinetd (this fixes bug #29687 - assumes using - vanilla inetd) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Nov 1998 23:32:03 -0400 - -samba (2.0.0beta1-1) experimental; urgency=low - - * First beta release of the samba-2.0.0 code. Before the beta I was - working with sources downloaded directly from the CVS server. This - package goes into experimental and I plan to release the new - samba to unstable as soon as it gets out of beta. - * Created several packages out of the Samba sources. They are: - samba (nmbd and smbd daemons + related programs), smbclient (FTP - like command line utility to retrieve files from SMB servers), - swat (Samba Web Administration Tool), samba-common (common files - used by samba, smbclient and swat), smbfsx (smbfs utilities for - kernels >= 2.1.70), smbwrapper and samba-doc (Samba documentation). - * Refreshed debian/samba-doc.docs so recently added docs. are - installed in the samba-doc package. New additions include man - pages in the /usr/doc/samba-doc/htmldocs/ directory. - * Deleted Debian specific nmblookup(1) man page as it is now upstream. - * Added smbtorture to smbclient package. - * Moved rpcclient from the samba package to the smbclient package. - * The Samba daemons (nmbd and smbd) now create a PID file so I changed - all calls to start-stop-daemon to use the PID file. - * Fixed debian/rules to install mksmbpasswd (fixes #27655). - * Modified /etc/init.d/samba so nmbd is started without the -a (append - to the log file instead of overwrite) switch. The new behavior of - nmbd is to NOT overwrite log files, so the -a switch can be deleted - safely. - * Moved from debstd to debhelper. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Oct 1998 08:37:41 -0400 - -samba (1.9.18p10-5) frozen unstable; urgency=high - - * Oppsss!!! While fixing bug #26884 I introduced a bug even worse than - the one I was trying to fix: in /etc/init.d/samba I got rid of the test - that tells us whether the Samba daemons are running from inetd or as - standalone daemons. I corrected the problem by editing again - /etc/init.d/samba to uncomment the test. - * Wishlist bug #28298 (typos in samba) was fixed. - * Wishlist bug #28309 (typos in smb.conf) was fixed. - - -- Eloy A. Paris <peloy@debian.org> Wed, 28 Oct 1998 09:11:47 -0400 - -samba (1.9.18p10-4) unstable; urgency=low - - * Minor patch to debian/rules to delete *substvars instead of only - substvars when doing a "debian/rules clean" (thanks to Daniel Jacobowitz - <dmj@andrew.cmu.edu> for this). - * Small patch to source/shmem_sysv.c that eases compilation under - glibc-2.1 (thanks to Daniel <dmj@andrew.cmu.edu> for this). - - -- Eloy A. Paris <peloy@debian.org> Thu, 17 Sep 1998 15:33:49 -0400 - -samba (1.9.18p10-3) unstable; urgency=low - - * Patched smbclient again to fix minor formatting problem introduced - by Magosanyi Arpad's smbclient patch. - - -- Eloy A. Paris <peloy@debian.org> Thu, 3 Sep 1998 11:03:23 -0400 - -samba (1.9.18p10-2) unstable; urgency=low - - * Sync'ed include files for the smbfs utilities with the ones in - kernel 2.1.119. - * Added to the /usr/doc/samba/examples/ directory a new script called - wins2dns (courtesy of Jason Gunthorpe <jgg@deltatee.com>) that - generates BIND sonze files for hosts in the WINS database. - * Patched smbclient to include enhancements by Magosanyi Arpad - <mag@bunuel.tii.matav.hu> that make scripting easier. - - -- Eloy A. Paris <peloy@debian.org> Fri, 28 Aug 1998 13:34:54 -0400 - -samba (1.9.18p10-1) stable unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). I built a 1.9.18p9-1 but I - never released it because an obscure bug was found just a couple - of days before the official release, so the Samba Team stopped - the rollover of 1.9.18p9. - * Updated documentation (new files were added to the docs/ directory - that were not installed in /usr/doc/samba/). - * Fixed long standing bug #7695 (smb.conf's man page doesn't document - 'printing=lprng') - I made a couple of changes to the man page to - include references to lprng. - * Fixes bug #24930 (samba needs to suggest psmisc?). I don't think it - is necessary to make samba suggest psmisc just because the postinst - script mentions to call killall. So, I removed all references to - "killall" in the scripts. - * Fixes bug #25999 (Samba does not by default work with unix password - sync): I added the "passwd program" and "passwd chat" parameters to - the sample smb.conf to reflect the Debian environment. - - -- Eloy A. Paris <peloy@debian.org> Fri, 21 Aug 1998 08:59:18 -0400 - -samba (1.9.18p9-1) unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). - * Removed Jeremy Allison's patch applied to 1.9.18p8-2 because it is - now part of the new upstream version. - * Corrected small typo in addtosmbpass' man page (fixes #25629). - - -- Eloy A. Paris <peloy@debian.org> Tue, 11 Aug 1998 08:53:08 -0400 - -samba (1.9.18p8-2) frozen unstable; urgency=medium - - * Applied patch received from Jeremy Allison (Samba Team) that fixes - "grave" bug #23903 (samba maps username before authenicating with - NT password server). - * Added a "sleep 2" between "start-stop-daemon --stop" and - "start-stop-daemon --start" in /etc/init.d/samba so when this script - is called with the "restart" parameter the Samba daemons are restarted - properly. This fixes bug #24211 (init.d script doesn't restart). - * Sent start-stop-daemon output in /etc/init.d/samba to /dev/null to - avoid annoying warning messages. - * Added perfomance tune parameters to sample /etc/smb.conf (SO_SNDBUF=4096 - and SO_RCVBUF=4096 to "socket options" in /etc/smb.conf). I can't - find who sent this suggestion to me. If you are listening, drop me a - note and I'll put your name here :-) - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Jun 1998 08:45:01 -0400 - -samba (1.9.18p8-1) frozen unstable; urgency=low - - * New upstream release that fixes _lots_ of "ugly" bugs. The list of - fixed bugs is too long to include here (see /usr/doc/samba/WHATSNEW.txt). - * Fixed postinst to quote arguments to if [ arg .. ] constructs - (fixes #22881). - * Applied Jeremy Allison's patch (posted to the samba-ntdom mailing - list) that solves a problem with username maps (the Samba Team did - not catch this problem before final 1.9.18p8). - * Made /etc/init.d/samba to print out a warning when Samba is running - from inetd and the user runs /etc/init.d/samba to start|stop|restart - Samba (there's no point on doing this because inetd will start the - daemons again when there is traffic on UDP port 137-139). - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Jun 1998 00:18:25 -0400 - -samba (1.9.18p7-4) frozen unstable; urgency=medium - - * Fixes the serious problem of having the WINS name server - database getting deleted at boot time. That happened because the - WINS database was being stored under /var/lock/samba/ and all files - under /var/lock/ are deleted at boot time. The place where the WINS - database is stored was moved to /var/samba/. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:24:29 -0400 - -samba (1.9.18p7-3) stable; urgency=high - - * Libc5 version for Bo (stable) that fixes the recently reported - security hole. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:19:33 -0400 - -samba (1.9.18p7-2) frozen unstable; urgency=low - - * Added patches from the non-mantainer upload that make us able - to compile Samba on Alpha systems. This fixes bug #22379. - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 20:38:51 -0400 - -samba (1.9.18p7-1) frozen unstable; urgency=low - - * New upstream release (just bug fixes, no new functionality). - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 11:47:32 -0400 - -samba (1.9.18p6-2) frozen unstable; urgency=low - - * Uploaded to frozen (I forgot to upload last version to frozen - so it got installed only in unstable). - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 May 1998 18:10:17 -0400 - -samba (1.9.18p6-1.1) unstable; urgency=low - - * non-maintainer upload for Alpha - * patch needed for source/quota.c (_syscall4() confusion) - - -- Paul Slootman <paul@debian.org> Tue, 12 May 1998 20:39:13 +0200 - -samba (1.9.18p6-1) unstable; urgency=low - - * New upstream release that fixes a possible buffer overflow. - This security hole was reported on BugTraq by Drago. The - previous Debian version (1.9.18p5-1) was not released because - 1.9.18p5 and 1.9.18p6 were released very closely. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 20:28:33 -0400 - -samba (1.9.18p5-1) unstable; urgency=low - - * New upstream release (no new funcionality, just bug fixes - see - /usr/doc/samba/WHATSNEW.txt.gz). - * Backed off Debian patches that were added upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 08:43:53 -0400 - -samba (1.9.18p4-2) frozen unstable; urgency=low - - * Patched smbclient(1) man page to not reference the unsopported - -A parameter (fixes #6863). - * Changes to start nmbd with the -a option (in /etc/init.d/samba - and in the entry added to /etc/inetd.conf). - * Fixed typo in sample smb.conf (fixes #21484). - * Fixed yet another typo in sample smb.conf (fixes #21447). - - -- Eloy A. Paris <peloy@debian.org> Fri, 17 Apr 1998 22:19:23 -0400 - -samba (1.9.18p4-1) frozen unstable; urgency=low - - * New upstream version that fixes several bugs. - * New scheme for keeping track of Debian specific configuration. - This new scheme fixes bug #18624 (Samba always asks the user about - configuration options). New scheme stores Debian specific - configuration information in /etc/samba/debian_config. - * Changes to /usr/sbin/sambaconfig, prerm and postinst to support the - new configuration scheme. - * Moved required kernel 2.1.x include files inside the source tree - so I don't have to do very nasty things like creating crazy - symlinks in /usr/include to make this package compile. This - allows non-root users to build the package and fixes bug - #20104. - * Fixed address of the FSF in /usr/doc/samba/copyright (problem - reported by lintian). - * The /etc/init.d/samba script now supports the force-reload - argument, as required by the policy (problem reported by lintian). - * Added a "rm /etc/cron.weekly/samba" at the end of the postinst. - * Now the samba package can be installed even if no nmbd or smbd processes - are running. This fixes the following bugs: #8917, #9334, #10268, - #10411, #11146 and #13387. - * Provides the original README in /usr/doc/samba. This fixes bug #9693. - * Added a --no-reload option to sambaconfig to not reload Samba - after configuration. - * Created man pages for sambaconfig(8), addtosmbpass(8), - mksmbpasswd(8) and nmblookup(1). - * Corrected small typo in sample /etc/smb.conf. - * Added two new parameters to /etc/smb.conf: "preserver case" and - "short preserve case". - * "rm -Rf /var/lock/samba" in postrm when package is being purged. - * Patched upstream source (nmbd.c) to not overwrite log files when - nmbd is called with the -a parameter (fixes #17704: nmbd ignores - -a option). - * /etc/init.d/samba now starts the nmbd daemon with the -a parameter - to not overwrite log files. - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Mar 1998 21:22:03 -0400 - -samba (1.9.18p3-1) unstable; urgency=low - - * New upstream version. - * Oppsss!!! I really screwed it up (actually, debstd did). - 1.9.18p2-2 still contained man pages (smbmount and smbumount) part - of other packages. This version does have this corrected. If not, - I no longer deserve to be a Debian developer! So, this version - fixes bug #18438 and some of the bugs I claimed to fix in - 1.9.18p2-2. Oh, by the way, I fixed the problem by running debstd - with -m in debian/rules (man pages are installed by "make install" - so it's a bad idea to re-install man pages with debstd). - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Feb 1998 17:32:42 -0400 - -samba (1.9.18p2-2) unstable; urgency=low - - * Fixes bugs #18017, #17999, #17961, #17932: old 1.9.18p2-1 provided - a man page for smbmount, which conflicts with package smbfs. This - was solved by creating a multi-binary package that produces - package samba and new package smbfsx. - * Fixes bug #18000 (typo in postinst). - * Fixes bug #17958 (postinst asks obsolete question). Actually, - the question is still asked, but only if Samba is run as daemons. - * Created a multi-binary package from the Samba sources: package - samba and new package smbfsx which provides SMB mount utilities - for kernels > 2.1.70. - - -- Eloy A. Paris <peloy@debian.org> Mon, 9 Feb 1998 19:47:05 -0400 - -samba (1.9.18p2-1) unstable; urgency=low - - * New upstream version. - * Removed /etc/cron.weekly/samba because Samba does not handle well - rotation of log files (if the log file is rotated Samba will - continue to log to the rotated file, instead of the just created - one). In any case, Samba will rotate log files after an specific - file size. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jan 1998 22:34:27 -0400 - -samba (1.9.18p1-2) unstable; urgency=low - - * Created a multi-binary package out of the Samba sources to provide - packages samba and smbfsx (userland utilities to work with - smbfs with kernels > 2.1.x. - - -- Eloy A. Paris <peloy@debian.org> Sat, 17 Jan 1998 09:23:48 -0400 - -samba (1.9.18p1-1) unstable; urgency=low - - * New upstream version. - * Created /etc/cron.daily/samba to save a copy of /etc/smbpasswd in - /var/backups/smbpasswd.bak. - - -- Eloy A. Paris <peloy@debian.org> Wed, 14 Jan 1998 13:40:56 -0400 - -samba (1.9.18alpha14-1) unstable; urgency=low - - * New upstream version. - * Added a note to the postinst script telling the user that he/she - needs to run smbpasswd manually after creating a new /etc/smbpasswd - from /etc/passwd. - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Dec 1997 23:44:37 -0400 - -samba (1.9.18alpha13-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 16 Dec 1997 13:02:32 -0400 - -samba (1.9.18alpha12-1) unstable; urgency=low - - * New upstream version. - * Conflicts with the sambades package because the new Samba 1.9.18 - series do not depend on the DES libraries to support encrypted - passwords. - * Added parameter "encrypt passwords = yes" to /etc/smb.conf. - * Compiled with support for quotas in disk_free(). - * Home directories are now exported read only by default. - * Re-worked debian/rules. - * Re-worked sample smb.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Dec 1997 22:50:34 -0400 - -samba (1.9.17p4-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable by everybody because some Samba utilities - will fail otherwise when run by non-root users. - * Dropped PAM support while the PAM libraries are ported to libc6. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Oct 1997 18:08:49 -0400 - -samba (1.9.17p3-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable only by root as suggested by smbd's man page. - - -- Eloy A. Paris <peloy@debian.org> Wed, 15 Oct 1997 09:21:25 -0400 - -samba (1.9.17p2-2) unstable; urgency=low - - * Running Samba as daemons instead of from inetd. - * Removing netbios entries in /etc/inetd.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 9 Oct 1997 23:37:25 -0400 - -samba (1.9.17p2-1) unstable; urgency=low - - * New upstream version that fixes a serious security hole. - * Removed Debian patches added in 1.9.17-1 and 1.9.17p1-1 because - these patches are now part of the upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Sep 1997 22:54:33 -0400 - -samba (1.9.17p1-1) unstable; urgency=low - - * New upstream version. - * Defined symbol _LINUX_C_LIB_VERSION_MAJOR as 6 in includes.h to shut up - compiler warnings. - * Included rpcsvc/ypclnt.h in includes.h to shut up compiler warnings. - * Included crypt.h to have function prototype for crypt(). - * Included netinet/tcp.h to have some socket options included. - * Included netinet/ip.h to have some socket options included. - * Linking with libcrypt (LIBM='... -lcrypt'). Without including this - library smbd generates a seg. fault when authenticating users (?). - - -- Eloy A. Paris <debian.org> Wed, 10 Sep 1997 22:09:18 -0400 - -samba (1.9.17-1) unstable; urgency=low - - * New upstream version (called the "Browse Fix Release") - * Added the option --oknodo to the start-stop-daemon invocation in prerm - script. This was because the prerm was failing because start-stop-daemon - was returning an error code if no nmbd or smbd daemons were found - to kill. - * The function yp_get_default_domain(), referenced in three source - files was part of libc5 but with libc6 (glibc2) it has been moved - to libnss_nis. Since the linker was unable to find the function - I had to add LIBSM='-lnss_nis' to debian/rules. - * Added -DNO_ASMSIGNALH and -DGLIBC2 to FLAGSM in debian/rules - because compiling was failing because of conflicts with glibc2. - * Patched source/includes.h to include termios.h if GLIBC2 is defined. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Aug 1997 08:39:32 -0400 - -samba (1.9.17alpha5-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Aug 1997 18:05:02 -0400 - -samba (1.9.16p11-3) unstable; urgency=low - - * Fixed accidental omission of /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 15 Mar 1997 22:31:26 -0500 - -samba (1.9.16p11-2) unstable; urgency=low - - * Recompiled against newer PAM libraries. - * Added /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 8 Mar 1997 01:16:28 -0500 - -samba (1.9.16p11-1) unstable; urgency=low - - * New upstream release. - * Added PAM support. - - -- Klee Dienes <klee@debian.org> Tue, 25 Feb 1997 18:00:12 -0500 - -samba (1.9.16p9-2) unstable; urgency=low - - * minor packaging changes - - -- Klee Dienes <klee@sauron.sedona.com> Sun, 3 Nov 1996 11:45:37 -0700 - -samba (1.9.16p9-1) unstable; urgency=low - - * upgraded to new upstream version - - -- Klee Dienes <klee@sauron.sedona.com> Sat, 26 Oct 1996 21:38:20 -0700 - -1.9.16alpha10-1: - 960714 - * Removed Package_Revision from control file. - * Removed -m486 compiler option. - * Added Architecture, Section and Priority fields to control file. - * Upgraded to latest upstream version. - * Uses update-inetd now. - * Added shadow passwords support. - * Fixed Bug#1946: nmbd won't browse - -1.9.15p4-1: - 951128 - * Upgraded to latest upstream version. - * Fixed many bugs. - * Adds Master Browsing support. - * Converted to ELF. - * Fixed bug #1825 - nmbd is now killed when removing samba. - -1.9.14-1: - 950926 Andrew Howell <andrew@it.com.au> - * Upgraded to latest version. - * Fixed Bug #1139 - samba won't print - -1.9.14alpha5-1: - * Fixes killing of inetd problem in debian.postint and debian.postrm - -1.9.14alpha5-0: - 950704 Andrew Howell <andrew@it.com.au> - * Taken over samba package from Bruce Perens. - * Upgraded to newest version of samba. - -1.9.02-1: - 9-January-1994 Bruce Perens <Bruce@Pixar.com> - * Added Debian GNU/Linux package maintenance system files, and - configured for Debian systems. diff --git a/packaging/Debian/debian-sarge/config.cache b/packaging/Debian/debian-sarge/config.cache deleted file mode 100644 index 8872a27b76..0000000000 --- a/packaging/Debian/debian-sarge/config.cache +++ /dev/null @@ -1,221 +0,0 @@ -# -# 22 August 2001 Steve Langasek <vorlon@debian.org> -# -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -# -# This config.cache file contains a list of acceptable autoconf -# values which can be used in compiling Samba for Debian woody/sid. -# -# Autoconf sorts options alphabetically in its output. This file -# groups options logically. - - -# Load any architecture-specific settings -if [ -n "$DEB_HOST_GNU_TYPE" \ - -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then - . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -fi - - -# This is at the top because it's most in need of regular tweaking. -# These are options which are supported on 2.4 kernels, but not on 2.2 -# kernels. - -samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} - - -# These are present in 2.2 kernels, but not in 2.0... - -samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} - - -# Various basic libc/compiler stuff that it's blindingly obvious that -# Linux supports (now watch me get bitten for saying that) - -ac_cv_c_const=${ac_cv_c_const=yes} -ac_cv_c_inline=${ac_cv_c_inline=inline} -samba_cv_volatile=${samba_cv_volatile=yes} -ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -ac_cv_func_bzero=${ac_cv_func_bzero=yes} -ac_cv_func_chmod=${ac_cv_func_chmod=yes} -ac_cv_func_chown=${ac_cv_func_chown=yes} -ac_cv_func_chroot=${ac_cv_func_chroot=yes} -ac_cv_func_connect=${ac_cv_func_connect=yes} -ac_cv_func_dup2=${ac_cv_func_dup2=yes} -ac_cv_func_execl=${ac_cv_func_execl=yes} -ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -ac_cv_func_fchown=${ac_cv_func_fchown=yes} -ac_cv_func_fstat=${ac_cv_func_fstat=yes} -ac_cv_func_fsync=${ac_cv_func_fsync=yes} -ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -ac_cv_func_glob=${ac_cv_func_glob=yes} -ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -ac_cv_func_llseek=${ac_cv_func_llseek=yes} -ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -ac_cv_func_memmove=${ac_cv_func_memmove=yes} -ac_cv_func_memset=${ac_cv_func_memset=yes} -ac_cv_func_mktime=${ac_cv_func_mktime=yes} -ac_cv_func_pipe=${ac_cv_func_pipe=yes} -ac_cv_func_poll=${ac_cv_func_poll=yes} -ac_cv_func_pread=${ac_cv_func_pread=yes} -ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -ac_cv_func_rand=${ac_cv_func_rand=yes} -ac_cv_func_random=${ac_cv_func_random=yes} -ac_cv_func_readlink=${ac_cv_func_readlink=yes} -ac_cv_func_rename=${ac_cv_func_rename=yes} -ac_cv_func_select=${ac_cv_func_select=yes} -ac_cv_func_setenv=${ac_cv_func_setenv=yes} -ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -ac_cv_func_setsid=${ac_cv_func_setsid=yes} -ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -ac_cv_func_srand=${ac_cv_func_srand=yes} -ac_cv_func_srandom=${ac_cv_func_srandom=yes} -ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -ac_cv_func_strchr=${ac_cv_func_strchr=yes} -ac_cv_func_strdup=${ac_cv_func_strdup=yes} -ac_cv_func_strerror=${ac_cv_func_strerror=yes} -ac_cv_func_strftime=${ac_cv_func_strftime=yes} -ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -ac_cv_func_symlink=${ac_cv_func_symlink=yes} -ac_cv_func_usleep=${ac_cv_func_usleep=yes} -ac_cv_func_utime=${ac_cv_func_utime=yes} -ac_cv_func_utimes=${ac_cv_func_utimes=yes} -ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -ac_cv_type_size_t=${ac_cv_type_size_t=yes} -ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -samba_cv_socklen_t=${samba_cv_socklen_t=yes} - -# Yes, we know Linux supports fcntl locking. Just ignore -# any errors caused by building on an NFS mount. -samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} - - -# smbwrapper doesn't work because the glibc maintainers don't want -# to support transparent userland VFS. We might as well preempt -# any checks for shadowed symbols that are only useful for smbwrapper. - -ac_cv_func___chdir=${ac_cv_func___chdir=no} -ac_cv_func__chdir=${ac_cv_func__chdir=no} -ac_cv_func___close=${ac_cv_func___close=no} -ac_cv_func__close=${ac_cv_func__close=no} -ac_cv_func___closedir=${ac_cv_func___closedir=no} -ac_cv_func__closedir=${ac_cv_func__closedir=no} -ac_cv_func___dup=${ac_cv_func___dup=no} -ac_cv_func__dup=${ac_cv_func__dup=no} -ac_cv_func___dup2=${ac_cv_func___dup2=no} -ac_cv_func__dup2=${ac_cv_func__dup2=no} -ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -ac_cv_func___fork=${ac_cv_func___fork=no} -ac_cv_func__fork=${ac_cv_func__fork=no} -ac_cv_func___fstat=${ac_cv_func___fstat=no} -ac_cv_func__fstat=${ac_cv_func__fstat=no} -ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -ac_cv_func___getdents=${ac_cv_func___getdents=no} -ac_cv_func__getdents=${ac_cv_func__getdents=no} -ac_cv_func___llseek=${ac_cv_func___llseek=no} -ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -ac_cv_func__llseek=${ac_cv_func__llseek=no} -ac_cv_func___lseek=${ac_cv_func___lseek=no} -ac_cv_func__lseek=${ac_cv_func__lseek=no} -ac_cv_func___lstat=${ac_cv_func___lstat=no} -ac_cv_func__lstat=${ac_cv_func__lstat=no} -ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -ac_cv_func___open=${ac_cv_func___open=no} -ac_cv_func__open=${ac_cv_func__open=no} -ac_cv_func___open64=${ac_cv_func___open64=no} -ac_cv_func__open64=${ac_cv_func__open64=no} -ac_cv_func___opendir=${ac_cv_func___opendir=no} -ac_cv_func__opendir=${ac_cv_func__opendir=no} -ac_cv_func___pread=${ac_cv_func___pread=no} -ac_cv_func__pread=${ac_cv_func__pread=no} -ac_cv_func___pread64=${ac_cv_func___pread64=no} -ac_cv_func__pread64=${ac_cv_func__pread64=no} -ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -ac_cv_func___read=${ac_cv_func___read=no} -ac_cv_func__read=${ac_cv_func__read=no} -ac_cv_func___readdir=${ac_cv_func___readdir=no} -ac_cv_func__readdir=${ac_cv_func__readdir=no} -ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -ac_cv_func___stat=${ac_cv_func___stat=no} -ac_cv_func__stat=${ac_cv_func__stat=no} -ac_cv_func___stat64=${ac_cv_func___stat64=no} -ac_cv_func__stat64=${ac_cv_func__stat64=no} -ac_cv_func___telldir=${ac_cv_func___telldir=no} -ac_cv_func__telldir=${ac_cv_func__telldir=no} -ac_cv_func___write=${ac_cv_func___write=no} -ac_cv_func__write=${ac_cv_func__write=no} -ac_cv_func___xstat=${ac_cv_func___xstat=no} - - - -# Miscellaneous stuff that isn't, and shouldn't be, available -# in Debian. Those interested in building debs for other systems may -# need to remove some of these defines. - -ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -ac_cv_func_setluid=${ac_cv_func_setluid=no} -ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} diff --git a/packaging/Debian/debian-sarge/config.cache.alpha-linux b/packaging/Debian/debian-sarge/config.cache.alpha-linux deleted file mode 100644 index 6d17192026..0000000000 --- a/packaging/Debian/debian-sarge/config.cache.alpha-linux +++ /dev/null @@ -1,12 +0,0 @@ -# 22 Aug 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the alpha-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-sarge/config.cache.sparc-linux b/packaging/Debian/debian-sarge/config.cache.sparc-linux deleted file mode 100644 index a2a21b1d3a..0000000000 --- a/packaging/Debian/debian-sarge/config.cache.sparc-linux +++ /dev/null @@ -1,13 +0,0 @@ -# 24 Spe 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the sparc-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresuid=${samba_cv_have_setresuid=no} -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-sarge/control b/packaging/Debian/debian-sarge/control deleted file mode 100644 index 712c57c144..0000000000 --- a/packaging/Debian/debian-sarge/control +++ /dev/null @@ -1,201 +0,0 @@ -Source: samba -Section: net -Priority: optional -Maintainer: Simo Sorce <idra@samba.org> -Uploaders: Simo Sorce <idra@samba.org> -Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [alpha arm hppa i386 ia64 m68k mips mipsel powerpc s390 s390x sh3 sh3eb sh4 sh4eb sparc sparc64 amd64], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1) -Standards-Version: 3.5.10 - -Package: samba -Architecture: any -Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules -Replaces: samba-common (<= 2.0.5a-2) -Suggests: samba-doc -Description: a LanManager-like file and printer server for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the components necessary to turn your - Debian GNU/Linux box into a powerful file and printer server. - . - Currently, the Samba Debian packages consist of the following: - . - samba - LanManager-like file and printer server for Unix. - samba-common - Samba common files used by both the server and the client. - smbclient - LanManager-like simple client for Unix. - swat - Samba Web Administration Tool - samba-doc - Samba documentation. - smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). - libpam-smbpass - pluggable authentication module for SMB password database - libsmbclient - Shared library that allows applications to talk to SMB servers - libsmbclient-dev - libsmbclient shared libraries - winbind: Service to resolve user and group information from Windows NT servers - python2.3-samba: Python bindings that allow access to various aspects of Samba - . - It is possible to install a subset of these packages depending on - your particular needs. For example, to access other SMB servers you - should only need the smbclient and samba-common packages. - -Package: samba-common -Architecture: any -Depends: debconf, libpam-modules, ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Description: Samba common files used by both the server and the client - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the common files that are used by both the server - (provided in the samba package) and the client (provided in the smbclient - package). - -Package: smbclient -Architecture: any -Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Provides: samba-client -Suggests: smbfs -Description: a LanManager-like simple client for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains some client components of the Samba suite. In - particular it includes the command line utilities smbclient, smbtar, - and smbspool. If you want to mount shares exported from Microsoft - Windows machines or a Samba server you must install the smbfs package. - -Package: swat -Architecture: any -Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends} -Recommends: samba-doc -Description: Samba Web Administration Tool - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the components of the Samba suite that are needed - for Web administration of the Samba server. - . - Note: if you want to use the on-line documentation that is accesible - through the Swat front-end you must install the samba-doc package. - -Package: samba-doc -Section: doc -Architecture: all -Description: Samba documentation - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the documentation that comes in the original - tarball. - -Package: smbfs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Suggests: smbclient -Replaces: smbfsx -Conflicts: smbfsx, suidmanager (<< 0.50) -Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) - Smbfs is a filesystem which understands the SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - . - If you want to use command-line utilities like smbclient, smbtar - and/or smbspool you just need to install the smbclient package. - . - Starting with the Debian Samba packages version 2.2.0-1, the old smbfs - utilities for 2.0.x have been removed. There are no wrapper scripts - that call a specific smbmount/smbumount depending on the kernel - version. If you are using a 2.0.x kernel please upgrade or use the - latest Samba 2.0.7 Debian package. - -Package: libpam-smbpass -Section: admin -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Suggests: samba -Description: pluggable authentication module for SMB password database - This is a stackable PAM module that allows a system administrator to easily - migrate to using encrypted passwords for Samba and to keep smb passwords in - sync with unix passwords. Unlike other solutions, it does this without - requiring users to change their existing passwords or login to Samba using - cleartext passwords. - -Package: libsmbclient -Section: libs -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Description: shared library that allows applications to talk to SMB servers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient shared library. - -Package: libsmbclient-dev -Section: libdevel -Priority: extra -Architecture: any -Depends: libsmbclient (= ${Source-Version}) -Description: libsmbclient static libraries and headers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient static libraries and headers - needed to build applications that use SMB services. - -Package: winbind -Section: net -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<= 2.2.3-2) -Description: service to resolve user and group information from Windows NT servers - This package provides the winbindd daemon, which provides a - service for the Name Service Switch capability that is present - in most modern C libraries (like the GNU C Library - glibc.) - . - The service provided by winbindd is called `winbind' and - can be used to resolve user and group information from a - Windows NT server. The service can also provide authentication - services via an associated PAM module. - -Package: python2.3-samba -Section: python -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, python2.3 -Description: Python bindings that allow access to various aspects of Samba - The Samba Python bindings allow you to access various aspects of Samba. - At the moment their status is "experimental" but they have been reported - to work well. - . - See /usr/share/doc/python2.3-samba/examples for a couple of examples. - -Package: samba-dbg -Section: devel -Architecture: any -Depends: samba (= ${Source-Version}) -Description: Samba debugging symbols - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains debugging symbols for the programs included in - the samba and smbclient packages. diff --git a/packaging/Debian/debian-sarge/control.in b/packaging/Debian/debian-sarge/control.in deleted file mode 100644 index 0e25412e67..0000000000 --- a/packaging/Debian/debian-sarge/control.in +++ /dev/null @@ -1,201 +0,0 @@ -Source: samba -Section: net -Priority: optional -Maintainer: Simo Sorce <idra@samba.org> -Uploaders: Simo Sorce <idra@samba.org> -Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [@libacl@], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1) -Standards-Version: 3.5.10 - -Package: samba -Architecture: any -Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules -Replaces: samba-common (<= 2.0.5a-2) -Suggests: samba-doc -Description: a LanManager-like file and printer server for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the components necessary to turn your - Debian GNU/Linux box into a powerful file and printer server. - . - Currently, the Samba Debian packages consist of the following: - . - samba - LanManager-like file and printer server for Unix. - samba-common - Samba common files used by both the server and the client. - smbclient - LanManager-like simple client for Unix. - swat - Samba Web Administration Tool - samba-doc - Samba documentation. - smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). - libpam-smbpass - pluggable authentication module for SMB password database - libsmbclient - Shared library that allows applications to talk to SMB servers - libsmbclient-dev - libsmbclient shared libraries - winbind: Service to resolve user and group information from Windows NT servers - python2.3-samba: Python bindings that allow access to various aspects of Samba - . - It is possible to install a subset of these packages depending on - your particular needs. For example, to access other SMB servers you - should only need the smbclient and samba-common packages. - -Package: samba-common -Architecture: any -Depends: debconf, libpam-modules, ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Description: Samba common files used by both the server and the client - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the common files that are used by both the server - (provided in the samba package) and the client (provided in the smbclient - package). - -Package: smbclient -Architecture: any -Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Provides: samba-client -Suggests: smbfs -Description: a LanManager-like simple client for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains some client components of the Samba suite. In - particular it includes the command line utilities smbclient, smbtar, - and smbspool. If you want to mount shares exported from Microsoft - Windows machines or a Samba server you must install the smbfs package. - -Package: swat -Architecture: any -Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends} -Recommends: samba-doc -Description: Samba Web Administration Tool - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the components of the Samba suite that are needed - for Web administration of the Samba server. - . - Note: if you want to use the on-line documentation that is accesible - through the Swat front-end you must install the samba-doc package. - -Package: samba-doc -Section: doc -Architecture: all -Description: Samba documentation - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the documentation that comes in the original - tarball. - -Package: smbfs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Suggests: smbclient -Replaces: smbfsx -Conflicts: smbfsx, suidmanager (<< 0.50) -Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) - Smbfs is a filesystem which understands the SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - . - If you want to use command-line utilities like smbclient, smbtar - and/or smbspool you just need to install the smbclient package. - . - Starting with the Debian Samba packages version 2.2.0-1, the old smbfs - utilities for 2.0.x have been removed. There are no wrapper scripts - that call a specific smbmount/smbumount depending on the kernel - version. If you are using a 2.0.x kernel please upgrade or use the - latest Samba 2.0.7 Debian package. - -Package: libpam-smbpass -Section: admin -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Suggests: samba -Description: pluggable authentication module for SMB password database - This is a stackable PAM module that allows a system administrator to easily - migrate to using encrypted passwords for Samba and to keep smb passwords in - sync with unix passwords. Unlike other solutions, it does this without - requiring users to change their existing passwords or login to Samba using - cleartext passwords. - -Package: libsmbclient -Section: libs -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Description: shared library that allows applications to talk to SMB servers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient shared library. - -Package: libsmbclient-dev -Section: libdevel -Priority: extra -Architecture: any -Depends: libsmbclient (= ${Source-Version}) -Description: libsmbclient static libraries and headers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient static libraries and headers - needed to build applications that use SMB services. - -Package: winbind -Section: net -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<= 2.2.3-2) -Description: service to resolve user and group information from Windows NT servers - This package provides the winbindd daemon, which provides a - service for the Name Service Switch capability that is present - in most modern C libraries (like the GNU C Library - glibc.) - . - The service provided by winbindd is called `winbind' and - can be used to resolve user and group information from a - Windows NT server. The service can also provide authentication - services via an associated PAM module. - -Package: python2.3-samba -Section: python -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, python2.3 -Description: Python bindings that allow access to various aspects of Samba - The Samba Python bindings allow you to access various aspects of Samba. - At the moment their status is "experimental" but they have been reported - to work well. - . - See /usr/share/doc/python2.3-samba/examples for a couple of examples. - -Package: samba-dbg -Section: devel -Architecture: any -Depends: samba (= ${Source-Version}) -Description: Samba debugging symbols - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains debugging symbols for the programs included in - the samba and smbclient packages. diff --git a/packaging/Debian/debian-sarge/copyright b/packaging/Debian/debian-sarge/copyright deleted file mode 100644 index 6a6b5572b7..0000000000 --- a/packaging/Debian/debian-sarge/copyright +++ /dev/null @@ -1,29 +0,0 @@ -This is the Samba Team prepackaged version of the Samba SMB -(LAN-Manager) server for Debian systems. Samba was written by -Andrew Tridgell <tridge@samba.org>, the Samba Team and many others. - -This package has been produced by Simo Sorce <idra@samba.org> -using scripts put together by Eloy Paris <peloy@debian.org>, -Steve Langasek <vorlon@debian.org>, and VÃctor Pérez Pereira -<vperez@debianvenezuela.org> based on previous work by Klee Dienes -<klee@debian.org>, Andrew Howell <andrew@it.com.au> and Bruce Perens -<bruce@pixar.com> from sources found at -<URL:http://www.samba.org/samba/ftp/>. - -Copyright: - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -On Debian GNU/Linux systems, the complete text of the GNU General -Public License can be found in `/usr/share/common-licenses/GPL'. diff --git a/packaging/Debian/debian-sarge/gdbcommands b/packaging/Debian/debian-sarge/gdbcommands deleted file mode 100644 index 5774b9ae31..0000000000 --- a/packaging/Debian/debian-sarge/gdbcommands +++ /dev/null @@ -1,2 +0,0 @@ -bt -quit diff --git a/packaging/Debian/debian-sarge/libpam-smbpass.docs b/packaging/Debian/debian-sarge/libpam-smbpass.docs deleted file mode 100644 index 89fbbf9042..0000000000 --- a/packaging/Debian/debian-sarge/libpam-smbpass.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/pam_smbpass/README -source/pam_smbpass/TODO diff --git a/packaging/Debian/debian-sarge/libpam-smbpass.examples b/packaging/Debian/debian-sarge/libpam-smbpass.examples deleted file mode 100644 index 48d841b2c1..0000000000 --- a/packaging/Debian/debian-sarge/libpam-smbpass.examples +++ /dev/null @@ -1,5 +0,0 @@ -source/pam_smbpass/samples/README -source/pam_smbpass/samples/kdc-pdc -source/pam_smbpass/samples/password-mature -source/pam_smbpass/samples/password-migration -source/pam_smbpass/samples/password-sync diff --git a/packaging/Debian/debian-sarge/libpam-smbpass.files b/packaging/Debian/debian-sarge/libpam-smbpass.files deleted file mode 100644 index 4263df5c0f..0000000000 --- a/packaging/Debian/debian-sarge/libpam-smbpass.files +++ /dev/null @@ -1 +0,0 @@ -lib/security/pam_smbpass.so diff --git a/packaging/Debian/debian-sarge/libsmbclient-dev.examples b/packaging/Debian/debian-sarge/libsmbclient-dev.examples deleted file mode 100644 index 2094c40b55..0000000000 --- a/packaging/Debian/debian-sarge/libsmbclient-dev.examples +++ /dev/null @@ -1 +0,0 @@ -examples/libsmbclient/ diff --git a/packaging/Debian/debian-sarge/libsmbclient-dev.files b/packaging/Debian/debian-sarge/libsmbclient-dev.files deleted file mode 100644 index a52c17cfc5..0000000000 --- a/packaging/Debian/debian-sarge/libsmbclient-dev.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/lib/libsmbclient.a -usr/lib/libsmbclient.so -usr/include/libsmbclient.h diff --git a/packaging/Debian/debian-sarge/libsmbclient.files b/packaging/Debian/debian-sarge/libsmbclient.files deleted file mode 100644 index 18b7f3b165..0000000000 --- a/packaging/Debian/debian-sarge/libsmbclient.files +++ /dev/null @@ -1,2 +0,0 @@ -usr/lib/libsmbclient.so.0.1 -usr/lib/libsmbclient.so.0 diff --git a/packaging/Debian/debian-sarge/libsmbclient.shlibs b/packaging/Debian/debian-sarge/libsmbclient.shlibs deleted file mode 100644 index 532b5de4d1..0000000000 --- a/packaging/Debian/debian-sarge/libsmbclient.shlibs +++ /dev/null @@ -1 +0,0 @@ -libsmbclient 0 libsmbclient (>= 3.0.2a-1) diff --git a/packaging/Debian/debian-sarge/mksmbpasswd.8 b/packaging/Debian/debian-sarge/mksmbpasswd.8 deleted file mode 100644 index 0a500102e8..0000000000 --- a/packaging/Debian/debian-sarge/mksmbpasswd.8 +++ /dev/null @@ -1,28 +0,0 @@ -.TH MKSMBPASSWD 8 12-Apr-1998 -.SH NAME -mksmbpasswd \- formats a /etc/passwd entry for a smbpasswd file -.SH SYNOPSIS -mksmbpasswd cat /etc/passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd -.SH DESCRIPTION -.B mksmbpasswd -should be used only once, the first time Samba is installed. The idea -is to ease accounts creation by transferring all user accounts from -/etc/passwd to /etc/samba/smbpasswd. -.PP -Please note that passwords are not transferred automatically from -/etc/passwd to the new /etc/samba/smbpasswd file. After running -.B mksmbpasswd -all accounts are disabled so the system administrator must run -smbpasswd for each account that needs to be enable. -.SH FILES -.TP -/etc/passwd -System wide accounts file -.TP -/etc/samba/smbpasswd -Encrypted passwords file for the Samba daemons -.SH SEE ALSO -samba(7), nmbd(8), smbd(8) -.SH AUTHOR -Eloy A. Paris <peloy@debian.org> (man page based on sendmailconfig's man page -by Robert Leslie <rob@mars.org>) diff --git a/packaging/Debian/debian-sarge/mksmbpasswd.awk b/packaging/Debian/debian-sarge/mksmbpasswd.awk deleted file mode 100644 index a7b41a725d..0000000000 --- a/packaging/Debian/debian-sarge/mksmbpasswd.awk +++ /dev/null @@ -1,5 +0,0 @@ -#!/usr/bin/awk -f -BEGIN {FS=":" - printf("#\n# SMB password file.\n#\n") - } -{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U ]:LCT-00000000:%s\n", $1, $3, $5) } diff --git a/packaging/Debian/debian-sarge/panic-action b/packaging/Debian/debian-sarge/panic-action deleted file mode 100644 index 13f773c1ef..0000000000 --- a/packaging/Debian/debian-sarge/panic-action +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh - -# Redirect all output to our mail command -( - # We must be given a pid to look at - if [ -z "$1" ]; then - echo "$0 called with no arguments." - exit 1 - fi - - if [ ! -d "/proc/$1" ]; then - echo "$0: No such process: $1" - exit 1 - fi - - # Find out what binary we're debugging - BINARYNAME=`readlink "/proc/$1/exe"` - - # Generic header for our email - echo "The Samba 'panic action' script, $0," - echo "was called for pid $1 ($BINARYNAME)." - echo - - if [ -z "$BINARYNAME" ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, the executable could not be found for process $1." - echo "It may have died unexpectedly, or you may not have permission to" - echo "debug the process." - exit 1 - fi - - # No debugger - if [ ! -x /usr/bin/gdb ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, gdb was not found on your system, so the error could not be" - echo "debugged. Please install the gdb package so that debugging information is" - echo "available the next time such a problem occurs." - exit 1 - fi - - echo "Below is a backtrace for this process generated with gdb, which shows" - echo "the state of the program at the time the error occured. You are" - echo "encouraged to submit this information as a bug report to Debian. For" - echo "information about the procedure for submitting bug reports , please see" - echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage." - echo - gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1" -) | mail -s "Segfault in Samba" root diff --git a/packaging/Debian/debian-sarge/patches/cups.patch b/packaging/Debian/debian-sarge/patches/cups.patch deleted file mode 100644 index 8b1b8653d9..0000000000 --- a/packaging/Debian/debian-sarge/patches/cups.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- samba-3.0.10.orig/source/include/includes.h -+++ samba-3.0.10/source/include/includes.h -@@ -940,10 +940,7 @@ - #endif - - #ifndef DEFAULT_PRINTING --#ifdef HAVE_CUPS --#define DEFAULT_PRINTING PRINT_CUPS --#define PRINTCAP_NAME "cups" --#elif defined(SYSV) -+#if defined(SYSV) - #define DEFAULT_PRINTING PRINT_SYSV - #define PRINTCAP_NAME "lpstat" - #else diff --git a/packaging/Debian/debian-sarge/patches/documentation.patch b/packaging/Debian/debian-sarge/patches/documentation.patch deleted file mode 100644 index 505a53c51b..0000000000 --- a/packaging/Debian/debian-sarge/patches/documentation.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- samba-3.0.4/docs/manpages/swat.8.orig 2004-05-05 10:22:50.000000000 -0400 -+++ samba-3.0.4/docs/manpages/swat.8 2004-05-10 13:25:53.000000000 -0400 -@@ -80,6 +80,13 @@ - .SH "INSTALLATION" - - .PP -+\fBDebian-specific Note\fR: all these steps have already been done for -+you. However, by default, swat is not enabled. This has been done for -+security reasons. To enable swat you need to edit /etc/inetd.conf, -+uncomment the swat entry (usually at the end of the file), and then -+restart inetd. -+ -+.PP - Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&. - - .PP -@@ -87,13 +94,13 @@ - - .TP 3 - \(bu --/usr/local/samba/sbin/swat -+/usr/sbin/swat - .TP - \(bu --/usr/local/samba/swat/images/* -+/usr/share/samba/swat/images/* - .TP - \(bu --/usr/local/samba/swat/help/* -+/usr/share/samba/swat/help/* - .LP - - .SS "Inetd Installation" -@@ -102,7 +109,7 @@ - You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&. - - .PP --In \fI/etc/services\fR you need to add a line like this: -+In \fI/etc/services\fR you need to add a line like this (not needed for Debian): - - .PP - \fBswat 901/tcp\fR -@@ -114,10 +121,10 @@ - the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&. - - .PP --In \fI/etc/inetd\&.conf\fR you should add a line like this: -+In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it automatically. You need to uncomment the line, though, because it is added commented out for security reasons): - - .PP --\fBswat stream tcp nowait\&.400 root /usr/local/samba/sbin/swat swat\fR -+\fBswat stream tcp nowait\&.400 root /usr/sbin/swat swat\fR - - .PP - Once you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill \-1 PID \fR where PID is the process ID of the inetd daemon\&. -@@ -141,8 +148,8 @@ - This file must contain a mapping of service name (e\&.g\&., swat) to service port (e\&.g\&., 901) and protocol type (e\&.g\&., tcp)\&. - - .TP --\fI/usr/local/samba/lib/smb\&.conf\fR --This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&. -+\fI/etc/samba/smb\&.conf\fR -+This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&. - - .SH "WARNINGS" - diff --git a/packaging/Debian/debian-sarge/patches/fhs.patch b/packaging/Debian/debian-sarge/patches/fhs.patch deleted file mode 100644 index e152ec873e..0000000000 --- a/packaging/Debian/debian-sarge/patches/fhs.patch +++ /dev/null @@ -1,551 +0,0 @@ -diff -uNr samba-3.0.10.orig/source/Makefile.in samba-3.0.10/source/Makefile.in ---- samba-3.0.10.orig/source/Makefile.in 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/Makefile.in 2004-12-17 03:55:29.000000000 -0800 -@@ -90,6 +90,13 @@ - # the directory where lock files go - LOCKDIR = @lockdir@ - -+# FHS directories; equal to LOCKDIR if not using --with-fhs -+CACHEDIR = @cachedir@ -+STATEDIR = @statedir@ -+ -+# Where to look for (and install) codepage databases. -+CODEPAGEDIR = @codepagedir@ -+ - # the directory where pid files go - PIDDIR = @piddir@ - # man pages language(s) -@@ -114,7 +121,7 @@ - PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\" - PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \ - -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\" --PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -+PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\" -DCACHEDIR=\"$(CACHEDIR)\" -DSTATEDIR=\"$(STATEDIR)\" - PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS) - - # Note that all executable programs now provide for an optional executable suffix. -@@ -1319,7 +1326,7 @@ - @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS) - - installdat: installdirs -- @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(LIBDIR) $(srcdir) -+ @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(CODEPAGEDIR) $(srcdir) - - installmsg: installdirs - @$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir) -diff -uNr samba-3.0.10.orig/source/configure.in samba-3.0.10/source/configure.in ---- samba-3.0.10.orig/source/configure.in 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/configure.in 2004-12-17 03:55:29.000000000 -0800 -@@ -35,7 +35,7 @@ - [ --with-fhs Use FHS-compliant paths (default=no)], - [ case "$withval" in - yes) -- lockdir="\${VARDIR}/lib/samba" -+ lockdir="\${VARDIR}/run/samba" - piddir="\${VARDIR}/run" - mandir="\${prefix}/share/man" - logfilebase="\${VARDIR}/log/samba" -@@ -43,6 +43,10 @@ - libdir="\${prefix}/lib/samba" - configdir="${sysconfdir}/samba" - swatdir="\${DATADIR}/samba/swat" -+ codepagedir="\${DATADIR}/samba" -+ statedir="\${VARDIR}/lib/samba" -+ cachedir="\${VARDIR}/cache/samba" -+ AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths]) - ;; - esac]) - -@@ -201,6 +205,9 @@ - AC_SUBST(sbindir) - AC_SUBST(rootsbindir) - AC_SUBST(pammodulesdir) -+AC_SUBST(codepagedir) -+AC_SUBST(statedir) -+AC_SUBST(cachedir) - - dnl Unique-to-Samba variables we'll be playing with. - AC_SUBST(SHELL) -diff -uNr samba-3.0.10.orig/source/dynconfig.c samba-3.0.10/source/dynconfig.c ---- samba-3.0.10.orig/source/dynconfig.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/dynconfig.c 2004-12-17 03:55:29.000000000 -0800 -@@ -53,6 +53,13 @@ - pstring dyn_LMHOSTSFILE = LMHOSTSFILE; - - /** -+ * @brief Samba data directory. -+ * -+ * @sa data_path() to get the path to a file inside the CODEPAGEDIR. -+ **/ -+pstring dyn_CODEPAGEDIR = CODEPAGEDIR; -+ -+/** - * @brief Samba library directory. - * - * @sa lib_path() to get the path to a file inside the LIBDIR. -@@ -70,3 +77,27 @@ - - pstring dyn_SMB_PASSWD_FILE = SMB_PASSWD_FILE; - pstring dyn_PRIVATE_DIR = PRIVATE_DIR; -+ -+ -+/* In non-FHS mode, these should be configurable using 'lock dir ='; -+ but in FHS mode, they are their own directory. Implement as wrapper -+ functions so that everything can still be kept in dynconfig.c. -+ */ -+ -+char *dyn_STATEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return STATEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -+ -+char *dyn_CACHEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return CACHEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -diff -uNr samba-3.0.10.orig/source/groupdb/mapping.c samba-3.0.10/source/groupdb/mapping.c ---- samba-3.0.10.orig/source/groupdb/mapping.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/groupdb/mapping.c 2004-12-17 03:55:29.000000000 -0800 -@@ -140,8 +140,8 @@ - - if (tdb) - return True; - -- tdb = tdb_open_log(lock_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open group mapping database\n")); - return False; -diff -uNr samba-3.0.10.orig/source/include/dynconfig.h samba-3.0.10/source/include/dynconfig.h ---- samba-3.0.10.orig/source/include/dynconfig.h 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/include/dynconfig.h 2004-12-17 03:55:29.000000000 -0800 -@@ -31,8 +31,12 @@ - extern pstring dyn_CONFIGFILE; - extern pstring dyn_LOGFILEBASE, dyn_LMHOSTSFILE; - extern pstring dyn_LIBDIR; -+extern pstring dyn_CODEPAGEDIR; - extern fstring dyn_SHLIBEXT; - extern pstring dyn_LOCKDIR; - extern pstring dyn_PIDDIR; - extern pstring dyn_SMB_PASSWD_FILE; - extern pstring dyn_PRIVATE_DIR; -+ -+char *dyn_STATEDIR(void); -+char *dyn_CACHEDIR(void); -diff -uNr samba-3.0.10.orig/source/intl/lang_tdb.c samba-3.0.10/source/intl/lang_tdb.c ---- samba-3.0.10.orig/source/intl/lang_tdb.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/intl/lang_tdb.c 2004-12-17 03:55:29.000000000 -0800 -@@ -128,7 +128,7 @@ - if (!lang) - return True; - -- asprintf(&msg_path, "%s.msg", lib_path((const char *)lang)); -+ asprintf(&msg_path, "%s.msg", data_path((const char *)lang)); - if (stat(msg_path, &st) != 0) { - /* the msg file isn't available */ - DEBUG(10, ("lang_tdb_init: %s: %s\n", msg_path, -diff -uNr samba-3.0.21.orig/source/lib/account_pol.c samba-3.0.21/source/lib/account_pol.c ---- samba-3.0.21.orig/source/lib/account_pol.c 2005-12-20 15:28:38.000000000 +0000 -+++ samba-3.0.21/source/lib/account_pol.c 2005-12-23 11:41:08.000000000 +0000 -@@ -262,7 +262,7 @@ - return True; - } - -- tdb = tdb_open_log(lock_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open account policy database\n")); - return False; -diff -uNr samba-3.0.10.orig/source/lib/util.c samba-3.0.10/source/lib/util.c ---- samba-3.0.10.orig/source/lib/util.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/lib/util.c 2004-12-17 03:55:29.000000000 -0800 -@@ -2362,6 +2362,61 @@ - } - - /** -+ * @brief Returns an absolute path to a file in the Samba data directory. -+ * -+ * @param name File to find, relative to CODEPAGEDIR. -+ * -+ * @retval Pointer to a static #pstring containing the full path. -+ **/ -+ -+char *data_path(const char *name) -+{ -+ static pstring fname; -+ snprintf(fname, sizeof(fname), "%s/%s", dyn_CODEPAGEDIR, name); -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba state directory -+ *****************************************************************/ -+char *state_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_STATEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba cache directory -+ *****************************************************************/ -+char *cache_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_CACHEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/** - * @brief Returns the platform specific shared library extension. - * - * @retval Pointer to a static #fstring containing the extension. -diff -uNr samba-3.0.10.orig/source/lib/util_unistr.c samba-3.0.10/source/lib/util_unistr.c ---- samba-3.0.10.orig/source/lib/util_unistr.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/lib/util_unistr.c 2004-12-17 03:55:29.000000000 -0800 -@@ -54,11 +54,11 @@ - } - initialised = 1; - -- upcase_table = map_file(lib_path("upcase.dat"), 0x20000); -+ upcase_table = map_file(data_path("upcase.dat"), 0x20000); - upcase_table_use_unmap = ( upcase_table != NULL ); - -- lowcase_table = map_file(lib_path("lowcase.dat"), 0x20000); -+ lowcase_table = map_file(data_path("lowcase.dat"), 0x20000); - lowcase_table_use_unmap = ( lowcase_table != NULL ); - - #ifdef HAVE_SETLOCALE - /* Get the name of the current locale. */ -@@ -161,7 +161,7 @@ - return; - } - -- valid_file = map_file(lib_path("valid.dat"), 0x10000); -+ valid_file = map_file(data_path("valid.dat"), 0x10000); - if (valid_file) { - valid_table = valid_file; - mapped_file = 1; -diff -uNr samba-3.0.10.orig/source/libsmb/samlogon_cache.c samba-3.0.10/source/libsmb/samlogon_cache.c ---- samba-3.0.10.orig/source/libsmb/samlogon_cache.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/libsmb/samlogon_cache.c 2004-12-17 03:55:29.000000000 -0800 -@@ -34,7 +34,7 @@ - BOOL netsamlogon_cache_init(void) - { - if (!netsamlogon_tdb) { -- netsamlogon_tdb = tdb_open_log(lock_path(NETSAMLOGON_TDB), 0, -+ netsamlogon_tdb = tdb_open_log(cache_path(NETSAMLOGON_TDB), 0, - TDB_DEFAULT, O_RDWR | O_CREAT, 0600); - } - -@@ -67,7 +67,7 @@ - winbindd_cache.tdb open. Open the tdb if a NULL is passed. */ - - if (!tdb) { -- tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_DEFAULT, O_RDWR, 0600); - if (!tdb) { - DEBUG(5, ("netsamlogon_clear_cached_user: failed to open cache\n")); -diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c samba-3.0.10/source/nmbd/nmbd_serverlistdb.c ---- samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:55:29.000000000 -0800 -@@ -327,7 +327,7 @@ - - updatecount++; - -- pstrcpy(fname,lp_lockdir()); -+ pstrcpy(fname,dyn_CACHEDIR()); - trim_char(fname,'\0' ,'/'); - pstrcat(fname,"/"); - pstrcat(fname,SERVER_LIST); -diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c samba-3.0.10/source/nmbd/nmbd_winsserver.c ---- samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nmbd/nmbd_winsserver.c 2004-12-17 03:55:30.000000000 -0800 -@@ -234,7 +234,7 @@ - - add_samba_names_to_subnet(wins_server_subnet); - -- if((fp = x_fopen(lock_path(WINS_LIST),O_RDONLY,0)) == NULL) { -+ if((fp = x_fopen(state_path(WINS_LIST),O_RDONLY,0)) == NULL) { - DEBUG(2,("initialise_wins: Can't open wins database file %s. Error was %s\n", - WINS_LIST, strerror(errno) )); - return True; -@@ -1810,7 +1810,7 @@ - } - } - -- slprintf(fname,sizeof(fname)-1,"%s/%s", lp_lockdir(), WINS_LIST); -+ slprintf(fname,sizeof(fname)-1,"%s/%s", dyn_STATEDIR(), WINS_LIST); - all_string_sub(fname,"//", "/", 0); - slprintf(fnamenew,sizeof(fnamenew)-1,"%s.%u", fname, (unsigned int)sys_getpid()); - -diff -uNr samba-3.0.23.orig/source/nsswitch/winbindd_cache.c samba-3.0.23/source/nsswitch/winbindd_cache.c ---- samba-3.0.23.orig/source/nsswitch/winbindd_cache.c 2006-07-15 09:50:09.000000000 -0400 -+++ samba-3.0.23/source/nsswitch/winbindd_cache.c 2006-07-15 09:55:30.000000000 -0400 -@@ -57,7 +57,7 @@ - return True; - - /* when working offline we must not clear the cache on restart */ -- wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), -+ wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), - WINBINDD_CACHE_TDB_DEFAULT_HASH_SIZE, - TDB_DEFAULT /*TDB_CLEAR_IF_FIRST*/, O_RDWR|O_CREAT, 0600); - -diff -uNr samba-3.0.10.orig/source/nsswitch/winbindd_util.c samba-3.0.10/source/nsswitch/winbindd_util.c ---- samba-3.0.10.orig/source/nsswitch/winbindd_util.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nsswitch/winbindd_util.c 2004-12-17 03:55:30.000000000 -0800 -@@ -957,7 +957,7 @@ - SMB_STRUCT_STAT stbuf; - TDB_CONTEXT *idmap_tdb; - -- pstrcpy(idmap_name, lock_path("winbindd_idmap.tdb")); -+ pstrcpy(idmap_name, state_path("winbindd_idmap.tdb")); - - if (!file_exist(idmap_name, &stbuf)) { - /* nothing to convert return */ -diff -uNr samba-3.0.10.orig/source/param/loadparm.c samba-3.0.10/source/param/loadparm.c ---- samba-3.0.10.orig/source/param/loadparm.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/param/loadparm.c 2004-12-17 03:55:30.000000000 -0800 -@@ -104,6 +104,9 @@ - char *szAddPrinterCommand; - char *szDeletePrinterCommand; - char *szOs2DriverMap; -+#ifdef FHS_COMPATIBLE -+ char *szLockDirStub; -+#endif - char *szLockDir; - char *szPidDir; - char *szRootdir; -@@ -1105,8 +1108,13 @@ - {"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE}, - {"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, - {"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, -+#ifdef FHS_COMPATIBLE -+ {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+ {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+#else - {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_ADVANCED}, - {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_HIDE}, -+#endif - {"pid directory", P_STRING, P_GLOBAL, &Globals.szPidDir, NULL, NULL, FLAG_ADVANCED}, - #ifdef WITH_UTMP - {"utmp directory", P_STRING, P_GLOBAL, &Globals.szUtmpDir, NULL, NULL, FLAG_ADVANCED}, -diff -uNr samba-3.0.23.orig/source/passdb/pdb_tdb.c samba-3.0.23/source/passdb/pdb_tdb.c ---- samba-3.0.23.orig/source/passdb/pdb_tdb.c 2006-07-15 09:50:09.000000000 -0400 -+++ samba-3.0.23/source/passdb/pdb_tdb.c 2006-07-15 09:55:30.000000000 -0400 -@@ -1598,7 +1598,7 @@ - /* save the path for later */ - - if ( !location ) { -- pstr_sprintf( tdbfile, "%s/%s", lp_private_dir(), PASSDB_FILE_NAME ); -+ pstr_sprintf( tdbfile, "%s", state_path(PASSDB_FILE_NAME) ); - pfile = tdbfile; - } - pstrcpy( tdbsam_filename, pfile ); -diff -uNr samba-3.0.10.orig/source/passdb/secrets.c samba-3.0.10/source/passdb/secrets.c ---- samba-3.0.10.orig/source/passdb/secrets.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/passdb/secrets.c 2004-12-17 03:55:30.000000000 -0800 -@@ -55,8 +55,7 @@ - if (tdb) - return True; - -- pstrcpy(fname, lp_private_dir()); -- pstrcat(fname,"/secrets.tdb"); -+ pstrcpy(fname, state_path("secrets.tdb")); - - tdb = tdb_open_log(fname, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - -diff -uNr samba-3.0.10.orig/source/printing/nt_printing.c samba-3.0.10/source/printing/nt_printing.c ---- samba-3.0.10.orig/source/printing/nt_printing.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/nt_printing.c 2004-12-17 03:55:31.000000000 -0800 -@@ -298,28 +298,28 @@ - - if (tdb_drivers) - tdb_close(tdb_drivers); -- tdb_drivers = tdb_open_log(lock_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_drivers = tdb_open_log(state_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_drivers) { - DEBUG(0,("nt_printing_init: Failed to open nt drivers database %s (%s)\n", -- lock_path("ntdrivers.tdb"), strerror(errno) )); -+ state_path("ntdrivers.tdb"), strerror(errno) )); - return False; - } - - if (tdb_printers) - tdb_close(tdb_printers); -- tdb_printers = tdb_open_log(lock_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_printers = tdb_open_log(state_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_printers) { - DEBUG(0,("nt_printing_init: Failed to open nt printers database %s (%s)\n", -- lock_path("ntprinters.tdb"), strerror(errno) )); -+ state_path("ntprinters.tdb"), strerror(errno) )); - return False; - } - - if (tdb_forms) - tdb_close(tdb_forms); -- tdb_forms = tdb_open_log(lock_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_forms = tdb_open_log(state_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_forms) { - DEBUG(0,("nt_printing_init: Failed to open nt forms database %s (%s)\n", -- lock_path("ntforms.tdb"), strerror(errno) )); -+ state_path("ntforms.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.10.orig/source/printing/printing.c samba-3.0.10/source/printing/printing.c ---- samba-3.0.10.orig/source/printing/printing.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/printing.c 2004-12-17 03:55:31.000000000 -0800 -@@ -177,8 +177,8 @@ - int services = lp_numservices(); - int snum; - -- unlink(lock_path("printing.tdb")); -- pstrcpy(printing_path,lock_path("printing")); -+ unlink(cache_path("printing.tdb")); -+ pstrcpy(printing_path,cache_path("printing")); - mkdir(printing_path,0755); - - /* handle a Samba upgrade */ -diff -uNr samba-3.0.10.orig/source/printing/printing_db.c samba-3.0.10/source/printing/printing_db.c ---- samba-3.0.10.orig/source/printing/printing_db.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/printing_db.c 2004-12-17 03:55:31.000000000 -0800 -@@ -89,7 +89,7 @@ - DLIST_ADD(print_db_head, p); - } - -- pstrcpy(printdb_path, lock_path("printing/")); -+ pstrcpy(printdb_path, cache_path("printing/")); - pstrcat(printdb_path, printername); - pstrcat(printdb_path, ".tdb"); - -diff -uNr samba-3.0.21.orig/source/registry/reg_db.c samba-3.0.21/source/registry/reg_db.c ---- samba-3.0.21.orig/source/registry/reg_db.c 2005-10-18 02:45:06.000000000 +0000 -+++ samba-3.0.21/source/registry/reg_db.c 2005-12-23 11:48:19.000000000 +0000 -@@ -205,12 +205,12 @@ - if ( tdb_reg ) - return True; - -- if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) -+ if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) - { -- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if ( !tdb_reg ) { - DEBUG(0,("regdb_init: Failed to open registry %s (%s)\n", -- lock_path("registry.tdb"), strerror(errno) )); -+ state_path("registry.tdb"), strerror(errno) )); - return False; - } - -@@ -252,11 +252,11 @@ - - become_root(); - -- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600); -+ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600); - if ( !tdb_reg ) { - result = ntstatus_to_werror( map_nt_error_from_unix( errno ) ); - DEBUG(0,("regdb_open: Failed to open %s! (%s)\n", -- lock_path("registry.tdb"), strerror(errno) )); -+ state_path("registry.tdb"), strerror(errno) )); - } - - unbecome_root(); -diff -uNr samba-3.0.23.orig/source/lib/sharesec.c samba-3.0.23/source/lib/sharesec.c ---- samba-3.0.23.orig/source/lib/sharesec.c 2006-07-15 09:50:09.000000000 -0400 -+++ samba-3.0.23/source/lib/sharesec.c 2006-07-15 09:55:31.000000000 -0400 -@@ -47,10 +47,10 @@ - return True; - } - -- share_tdb = tdb_open_log(lock_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ share_tdb = tdb_open_log(state_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!share_tdb) { - DEBUG(0,("Failed to open share info database %s (%s)\n", -- lock_path("share_info.tdb"), strerror(errno) )); -+ state_path("share_info.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.10.orig/source/sam/idmap_tdb.c samba-3.0.10/source/sam/idmap_tdb.c ---- samba-3.0.10.orig/source/sam/idmap_tdb.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/sam/idmap_tdb.c 2004-12-17 03:55:31.000000000 -0800 -@@ -487,7 +487,7 @@ - BOOL tdb_is_new = False; - - /* use the old database if present */ -- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); -+ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); - if (!tdbfile) { - DEBUG(0, ("idmap_init: out of memory!\n")); - return NT_STATUS_NO_MEMORY; -diff -uNr samba-3.0.23.orig/source/smbd/lanman.c samba-3.0.23/source/smbd/lanman.c ---- samba-3.0.23.orig/source/smbd/lanman.c 2006-07-15 09:50:10.000000000 -0400 -+++ samba-3.0.23/source/smbd/lanman.c 2006-07-15 09:55:31.000000000 -0400 -@@ -1052,9 +1052,9 @@ - BOOL local_list_only; - int i; - -- lines = file_lines_load(lock_path(SERVER_LIST), NULL, 0); -+ lines = file_lines_load(cache_path(SERVER_LIST), NULL, 0); - if (!lines) { -- DEBUG(4,("Can't open %s - %s\n",lock_path(SERVER_LIST),strerror(errno))); -+ DEBUG(4,("Can't open %s - %s\n",cache_path(SERVER_LIST),strerror(errno))); - return 0; - } - -diff -uNr samba-3.0.10.orig/source/utils/net_idmap.c samba-3.0.10/source/utils/net_idmap.c ---- samba-3.0.10.orig/source/utils/net_idmap.c 2004-12-17 03:50:10.000000000 -0800 -+++ samba-3.0.10/source/utils/net_idmap.c 2004-12-17 03:55:32.000000000 -0800 -@@ -126,7 +126,7 @@ - return NT_STATUS_UNSUCCESSFUL; - } - -- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); -+ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); - if (!tdbfile) { - DEBUG(0, ("idmap_init: out of memory!\n")); - return NT_STATUS_NO_MEMORY; -diff -uNr samba-3.0.11.orig/source/printing/nt_printing.c samba-3.0.11/source/printing/nt_printing.c ---- samba-3.0.11.orig/source/printing/nt_printing.c 2005-03-23 02:51:08.000000000 -0800 -+++ samba-3.0.11/source/printing/nt_printing.c 2005-03-23 02:54:33.000000000 -0800 -@@ -2065,7 +2065,7 @@ - close_all_print_db(); - - if (geteuid() == 0) { -- pstrcpy(printdb_path, lock_path("printing/")); -+ pstrcpy(printdb_path, cache_path("printing/")); - pstrcat(printdb_path, sharename); - pstrcat(printdb_path, ".tdb"); - diff --git a/packaging/Debian/debian-sarge/patches/installswat.sh.patch b/packaging/Debian/debian-sarge/patches/installswat.sh.patch deleted file mode 100644 index 81e3dcd444..0000000000 --- a/packaging/Debian/debian-sarge/patches/installswat.sh.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- samba-3.0.1/source/script/installswat.sh.orig 2004-01-13 13:43:42.000000000 -0500 -+++ samba-3.0.1/source/script/installswat.sh 2004-01-13 12:56:49.000000000 -0500 -@@ -114,7 +114,11 @@ - - # Install Using Samba book (but only if it is there) - --if [ "x$BOOKDIR" != "x" -a -f $SRCDIR../docs/htmldocs/using_samba/toc.html ]; then -+# Under Debian we don't actually install the book. The book is part of -+# the samba-doc package, so we just provide a symlink that points to -+# where the book is actually installed. The symlink is created in -+# debian/rules. -+if /bin/false; then - - # Create directories - diff --git a/packaging/Debian/debian-sarge/patches/make-distclean.patch b/packaging/Debian/debian-sarge/patches/make-distclean.patch deleted file mode 100644 index 9c9eb6ca67..0000000000 --- a/packaging/Debian/debian-sarge/patches/make-distclean.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff -uNr samba-3.0.7.orig/source/Makefile.in samba-3.0.7/source/Makefile.in ---- samba-3.0.7.orig/source/Makefile.in 2004-10-25 10:06:08.000000000 -0700 -+++ samba-3.0.7/source/Makefile.in 2004-10-25 10:03:31.000000000 -0700 -@@ -1371,6 +1371,7 @@ - - python_clean: - @-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi -+ @-rm -rf build/ - - # revert to the previously installed version - revert: -@@ -1512,6 +1514,7 @@ - - distclean: realclean - -rm -f include/stamp-h -+ -rm -f script/gen-8bit-gap.sh smbadduser - -rm -f include/config.h Makefile - -rm -f config.status config.cache so_locations - -rm -rf .deps TAGS diff --git a/packaging/Debian/debian-sarge/patches/nmbd-signalling.patch b/packaging/Debian/debian-sarge/patches/nmbd-signalling.patch deleted file mode 100644 index ca04cce3bf..0000000000 --- a/packaging/Debian/debian-sarge/patches/nmbd-signalling.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c ---- samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c 2002-11-26 20:54:19.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c 2002-12-16 23:34:13.000000000 -0600 -@@ -214,12 +214,16 @@ - extern struct in_addr loopback_ip; - - if(num_interfaces == 0) { -+ void (*old_handler)(int); -+ - DEBUG(0,("create_subnets: No local interfaces !\n")); - DEBUG(0,("create_subnets: Waiting for an interface to appear ...\n")); -+ old_handler = CatchSignal( SIGTERM, SIGNAL_CAST SIG_DFL ); - while (iface_count() == 0) { - sleep(5); - load_interfaces(); - } -+ CatchSignal( SIGTERM, SIGNAL_CAST old_handler ); - } - - num_interfaces = iface_count(); diff --git a/packaging/Debian/debian-sarge/patches/non-linux-ports.patch b/packaging/Debian/debian-sarge/patches/non-linux-ports.patch deleted file mode 100644 index ac2ee1dcf5..0000000000 --- a/packaging/Debian/debian-sarge/patches/non-linux-ports.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -uNr samba-3.0.11.orig/source/configure.in samba-3.0.11/source/configure.in ---- samba-3.0.11.orig/source/configure.in 2005-03-23 02:39:11.000000000 -0800 -+++ samba-3.0.11/source/configure.in 2005-03-23 02:43:01.000000000 -0800 -@@ -573,6 +573,15 @@ - fi - ;; - -+# Systems with LFS support. -+# -+ gnu* | k*bsd*-gnu) -+ CPPFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE $CPPFLAGS" -+ AC_DEFINE(_LARGEFILE64_SOURCE, 1, [Whether to enable large file support]) -+ AC_DEFINE(_FILE_OFFSET_BITS, 64, [File offset bits]) -+ AC_DEFINE(_GNU_SOURCE, 1, [Whether to use GNU libc extensions]) -+ ;; -+ - # Tests for linux LFS support. Need kernel 2.4 and glibc2.2 or greater support. - # - *linux*) -@@ -1040,7 +1049,7 @@ - # - # - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - # glibc <= 2.3.2 has a broken getgrouplist - AC_TRY_RUN([ - #include <unistd.h> -@@ -1172,7 +1181,10 @@ - - # and these are for particular systems - case "$host_os" in -- *linux*) AC_DEFINE(LINUX,1,[Whether the host os is linux]) -+ linux*-gnu* | gnu* | k*bsd*-gnu) -+ case "$host_os" in linux*) -+ AC_DEFINE(LINUX,1,[Whether the host os is linux]) ;; -+ esac - BLDSHARED="true" - if test "${ac_cv_gnu_ld_no_default_allow_shlib_undefined}" = "yes"; then - LDSHFLAGS="-shared -Wl,-Bsymbolic -Wl,--allow-shlib-undefined" -@@ -4044,7 +4056,7 @@ - AC_MSG_RESULT(yes); - - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - AC_CACHE_CHECK([for linux sendfile64 support],samba_cv_HAVE_SENDFILE64,[ - AC_TRY_LINK([#include <sys/sendfile.h>], - [\ -@@ -4307,10 +4319,10 @@ - WINBIND_NSS_LDSHFLAGS=$LDSHFLAGS - - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_linux.o" - ;; -- *freebsd[[5-9]]*) -+ freebsd5*|*freebsd[[6-9]]*) - # FreeBSD winbind client is implemented as a wrapper around - # the Linux version. - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_freebsd.o \ diff --git a/packaging/Debian/debian-sarge/patches/samba.patch b/packaging/Debian/debian-sarge/patches/samba.patch deleted file mode 100644 index 8e77cfb86e..0000000000 --- a/packaging/Debian/debian-sarge/patches/samba.patch +++ /dev/null @@ -1,65 +0,0 @@ -diff -uNr samba-3.0.0beta1.orig/source/client/smbmount.c samba-3.0.0beta1/source/client/smbmount.c ---- samba-3.0.0beta1.orig/source/client/smbmount.c 2003-06-07 12:57:32.000000000 -0500 -+++ samba-3.0.0beta1/source/client/smbmount.c 2003-06-30 20:12:22.000000000 -0500 -@@ -766,7 +766,7 @@ - *lp = 0; - pstrcpy(password,lp+1); - got_pass = True; -- memset(strchr_m(opteq+1,'%')+1,'X',strlen(password)); -+ memset(strchr_m(opteq+1,'%')+1,'\0',strlen(password)); - } - if ((lp=strchr_m(username,'/'))) { - *lp = 0; -@@ -776,7 +776,7 @@ - !strcmp(opts, "password")) { - pstrcpy(password,opteq+1); - got_pass = True; -- memset(opteq+1,'X',strlen(password)); -+ memset(opteq+1,'\0',strlen(password)); - } else if(!strcmp(opts, "credentials")) { - pstrcpy(credentials,opteq+1); - } else if(!strcmp(opts, "netbiosname")) { -@@ -890,7 +902,7 @@ - *p = 0; - pstrcpy(password,p+1); - got_pass = True; -- memset(strchr_m(getenv("USER"),'%')+1,'X',strlen(password)); -+ memset(strchr_m(getenv("USER"),'%')+1,'\0',strlen(password)); - } - strupper_m(username); - } -diff -uNr samba-3.0.0beta1.orig/source/web/diagnose.c samba-3.0.0beta1/source/web/diagnose.c ---- samba-3.0.0beta1.orig/source/web/diagnose.c 2003-06-07 12:57:41.000000000 -0500 -+++ samba-3.0.0beta1/source/web/diagnose.c 2003-06-30 20:12:22.000000000 -0500 -@@ -66,6 +66,7 @@ - static struct cli_state cli; - extern struct in_addr loopback_ip; - -+ loopback_ip.s_addr = htonl((127 << 24) + 1); - if (!cli_initialise(&cli)) - return False; - ---- samba-3.0.23/source/script/installbin.sh.in.orig 2006-07-15 09:08:36.000000000 -0400 -+++ samba-3.0.23/source/script/installbin.sh.in 2006-07-15 09:51:45.000000000 -0400 -@@ -21,13 +21,14 @@ - chmod $INSTALLPERMS $DESTDIR/$BINDIR/$p2 - - # this is a special case, mount needs this in a specific location -- if [ $p2 = smbmount ]; then -- if [ ! -d $DESTDIR/@rootsbindir@ ]; then -- mkdir $DESTDIR/@rootsbindir@ -- fi -- echo "Creating sym link $DESTDIR/@rootsbindir@/mount.smbfs to $BINDIR/$p2 " -- ln -sf $BINDIR/$p2 $DESTDIR/@rootsbindir@/mount.smbfs -- fi -+# Commented out for the Debian Samba package. We take care of this -+# important symlink in debian/rules. (peloy@debian.org) -+# if [ $p2 = smbmount ]; then -+# if [ ! -d $DESTDIR/sbin ]; then -+# mkdir $DESTDIR/sbin -+# fi -+# ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs -+# fi - done - - diff --git a/packaging/Debian/debian-sarge/patches/smbclient-pager.patch b/packaging/Debian/debian-sarge/patches/smbclient-pager.patch deleted file mode 100644 index 3ee85d4118..0000000000 --- a/packaging/Debian/debian-sarge/patches/smbclient-pager.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -uNr samba-2.999+3.0cvs20020906.orig/source/include/local.h samba-2.999+3.0cvs20020906/source/include/local.h ---- samba-2.999+3.0cvs20020906.orig/source/include/local.h 2002-09-04 14:13:06.000000000 -0500 -+++ samba-2.999+3.0cvs20020906/source/include/local.h 2002-09-08 14:19:24.000000000 -0500 -@@ -109,7 +109,7 @@ - /* the default pager to use for the client "more" command. Users can - override this with the PAGER environment variable */ - #ifndef PAGER --#define PAGER "more" -+#define PAGER "/usr/bin/pager" - #endif - - /* the size of the uid cache used to reduce valid user checks */ diff --git a/packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused b/packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused deleted file mode 100644 index e2a4c3ce2c..0000000000 --- a/packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused +++ /dev/null @@ -1,43 +0,0 @@ -diff -uNr samba-3.0.0beta2.orig/source/client/client.c samba-3.0.0beta2/source/client/client.c ---- samba-3.0.0beta2.orig/source/client/client.c 2003-07-01 22:36:24.000000000 -0500 -+++ samba-3.0.0beta2/source/client/client.c 2003-07-06 15:17:36.000000000 -0500 -@@ -2773,6 +2773,7 @@ - int opt; - pstring query_host; - BOOL message = False; -+ char* tar_args = NULL; - extern char tar_type; - pstring term_code; - static const char *new_name_resolve_order = NULL; -@@ -2816,7 +2817,7 @@ - max_protocol = interpret_protocol(poptGetOptArg(pc), max_protocol); - break; - case 'T': -- if (!tar_parseargs(argc, argv, poptGetOptArg(pc), optind)) { -+ if (!(tar_args = poptGetOptArg(pc))) { - poptPrintUsage(pc, stderr, 0); - exit(1); - } -@@ -2917,6 +2917,22 @@ - pstrcpy(cmdline_auth_info.password,poptGetArg(pc)); - } - -+ /* The tar command may take a number of string options; pass -+ everything we have left to tar_parseargs(). */ -+ if (tar_args) { -+ const char **argv2 = poptGetArgs(pc); -+ int argc2 = 0; -+ -+ if (argv2) { -+ while (argv2[argc2]) argc2++; -+ } -+ -+ if (!tar_parseargs(argc2, argv2, tar_args, 0)) { -+ poptPrintUsage(pc, stderr, 0); -+ exit(1); -+ } -+ } -+ - init_names(); - - if(new_name_resolve_order) diff --git a/packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch b/packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch deleted file mode 100644 index dac999dd63..0000000000 --- a/packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch +++ /dev/null @@ -1,15 +0,0 @@ -diff -ur samba-2.2.4.orig/source/client/smbmnt.c samba-2.2.4/source/client/smbmnt.c ---- samba-2.2.4.orig/source/client/smbmnt.c Sun Apr 8 15:22:51 2001 -+++ samba-2.2.4/source/client/smbmnt.c Sun May 5 16:42:29 2002 -@@ -259,7 +259,10 @@ - ment.mnt_fsname = share_name ? share_name : "none"; - ment.mnt_dir = mount_point; - ment.mnt_type = "smbfs"; -- ment.mnt_opts = ""; -+ if (mount_ro) -+ ment.mnt_opts = "ro"; -+ else -+ ment.mnt_opts = "rw"; - ment.mnt_freq = 0; - ment.mnt_passno= 0; - diff --git a/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch b/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch deleted file mode 100644 index f7e9ce4f69..0000000000 --- a/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch +++ /dev/null @@ -1,160 +0,0 @@ -diff -uNr samba-3.0alpha22.orig/source/client/smbmnt.c samba-3.0alpha22/source/client/smbmnt.c ---- samba-3.0alpha22.orig/source/client/smbmnt.c 2003-03-15 12:11:39.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmnt.c 2003-03-15 12:11:49.000000000 -0600 -@@ -28,6 +28,7 @@ - static uid_t mount_uid; - static gid_t mount_gid; - static int mount_ro; -+static int no_mtab; - static unsigned mount_fmask; - static unsigned mount_dmask; - static int user_mount; -@@ -40,6 +41,7 @@ - printf("Usage: smbmnt mount-point [options]\n"); - printf("Version %s\n\n",VERSION); - printf("-s share share name on server\n" -+ "-n don't update /etc/mtab\n" - "-r mount read-only\n" - "-u uid mount as uid\n" - "-g gid mount as gid\n" -@@ -54,7 +56,7 @@ - { - int opt; - -- while ((opt = getopt (argc, argv, "s:u:g:rf:d:o:")) != EOF) -+ while ((opt = getopt (argc, argv, "s:u:g:nrf:d:o:")) != EOF) - { - switch (opt) - { -@@ -71,6 +73,9 @@ - mount_gid = strtol(optarg, NULL, 0); - } - break; -+ case 'n': -+ no_mtab = 1; -+ break; - case 'r': - mount_ro = 1; - break; -@@ -274,36 +279,38 @@ - return -1; - } - -- if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -- { -- fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -- return 1; -- } -- close(fd); -+ if (!no_mtab) { -+ if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -+ { -+ fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -+ return 1; -+ } -+ close(fd); - -- if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -- { -- fprintf(stderr, "Can't open " MOUNTED); -- return 1; -- } -+ if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -+ { -+ fprintf(stderr, "Can't open " MOUNTED); -+ return 1; -+ } - -- if (addmntent(mtab, &ment) == 1) -- { -- fprintf(stderr, "Can't write mount entry"); -- return 1; -- } -- if (fchmod(fileno(mtab), 0644) == -1) -- { -- fprintf(stderr, "Can't set perms on "MOUNTED); -- return 1; -- } -- endmntent(mtab); -+ if (addmntent(mtab, &ment) == 1) -+ { -+ fprintf(stderr, "Can't write mount entry"); -+ return 1; -+ } -+ if (fchmod(fileno(mtab), 0644) == -1) -+ { -+ fprintf(stderr, "Can't set perms on "MOUNTED); -+ return 1; -+ } -+ endmntent(mtab); - -- if (unlink(MOUNTED"~") == -1) -- { -- fprintf(stderr, "Can't remove "MOUNTED"~"); -- return 1; -- } -+ if (unlink(MOUNTED"~") == -1) -+ { -+ fprintf(stderr, "Can't remove "MOUNTED"~"); -+ return 1; -+ } -+ } - - return 0; - } -diff -uNr samba-3.0alpha22.orig/source/client/smbmount.c samba-3.0alpha22/source/client/smbmount.c ---- samba-3.0alpha22.orig/source/client/smbmount.c 2003-03-15 12:04:29.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmount.c 2003-03-15 12:15:10.000000000 -0600 -@@ -48,6 +48,7 @@ - static int mount_ro; - static unsigned mount_fmask; - static unsigned mount_dmask; -+static BOOL no_mtab = False; - static BOOL use_kerberos; - /* TODO: Add code to detect smbfs version in kernel */ - static BOOL status32_smbfs = False; -@@ -273,6 +274,9 @@ - return; - } - -+ if (no_mtab) -+ return; -+ - if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) { - DEBUG(0,("%d: Can't get "MOUNTED"~ lock file", sys_getpid())); - return; -@@ -467,6 +471,9 @@ - args[i++] = "-s"; - args[i++] = svc2; - -+ if (no_mtab) { -+ args[i++] = "-n"; -+ } - if (mount_ro) { - args[i++] = "-r"; - } -@@ -662,7 +669,7 @@ - ****************************************************************************/ - static void usage(void) - { -- printf("Usage: mount.smbfs service mountpoint [-o options,...]\n"); -+ printf("Usage: mount.smbfs service mountpoint [-n] [-o options,...]\n"); - - printf("Version %s\n\n",VERSION); - -@@ -740,8 +747,13 @@ - argc -= 2; - argv += 2; - -- opt = getopt(argc, argv, "o:"); -- if(opt != 'o') { -+ opt = getopt(argc, argv, "no:"); -+ if (opt == 'n') { -+ DEBUG(3,("No mtab!\n")); -+ no_mtab = True; -+ opt = getopt(argc, argv, "o:"); -+ } -+ if (opt != 'o') { - return; - } - diff --git a/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch b/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch deleted file mode 100644 index db7fccc68b..0000000000 --- a/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/utils/status.c samba-2.999+3.0.alpha21/source/utils/status.c ---- samba-2.999+3.0.alpha21.orig/source/utils/status.c 2002-11-26 20:54:22.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/utils/status.c 2002-12-16 23:37:14.000000000 -0600 -@@ -686,6 +686,16 @@ - if (!shares_only) { - int ret; - -+ tdb = tdb_open_log(lock_path("locking.tdb"), 0, TDB_DEFAULT, O_RDONLY, 0); -+ -+ if (!tdb) { -+ d_printf("%s not initialised\n", lock_path("locking.tdb")); -+ d_printf("This is normal if an SMB client has never connected to your server.\n"); -+ exit(0); -+ } else { -+ tdb_close(tdb); -+ } -+ - if (!locking_init(1)) { - d_printf("Can't initialise locking module - exiting\n"); - exit(1); diff --git a/packaging/Debian/debian-sarge/patches/undefined-symbols.patch b/packaging/Debian/debian-sarge/patches/undefined-symbols.patch deleted file mode 100644 index e9a376ea9b..0000000000 --- a/packaging/Debian/debian-sarge/patches/undefined-symbols.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff -uNr samba-3.0.11.orig/source/Makefile.in samba-3.0.11/source/Makefile.in ---- samba-3.0.11.orig/source/Makefile.in 2005-03-23 02:40:40.000000000 -0800 -+++ samba-3.0.11/source/Makefile.in 2005-03-23 02:48:59.000000000 -0800 -@@ -631,7 +631,8 @@ - $(RPC_ECHO_OBJ) $(SMBLDAP_OBJ) $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) - - WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \ -- $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) -+ $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) \ -+ $(SECRETS_OBJ) - - WINBIND_WINS_NSS_PICOBJS = $(WINBIND_WINS_NSS_OBJ:.o=.@PICSUFFIX@) - -@@ -997,7 +998,7 @@ - - bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS) - @echo Linking libsmbclient shared library $@ -- @$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ -+ @$(SHLD) $(LDSHFLAGS) -Wl,-z,defs -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ - $(KRB5LIBS) $(LDAP_LIBS) \ - @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR) - diff --git a/packaging/Debian/debian-sarge/po/POTFILES.in b/packaging/Debian/debian-sarge/po/POTFILES.in deleted file mode 100644 index 95a7ea8150..0000000000 --- a/packaging/Debian/debian-sarge/po/POTFILES.in +++ /dev/null @@ -1,3 +0,0 @@ -[type: gettext/rfc822deb] samba-common.templates -[type: gettext/rfc822deb] samba.templates -[type: gettext/rfc822deb] swat.templates diff --git a/packaging/Debian/debian-sarge/po/ca.po b/packaging/Debian/debian-sarge/po/ca.po deleted file mode 100644 index c3cdc11aea..0000000000 --- a/packaging/Debian/debian-sarge/po/ca.po +++ /dev/null @@ -1,291 +0,0 @@ -# samba (debconf) translation to Catalan. -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -# Aleix Badia i Bosch <abadia@ica.es> 2004 -# -msgid "" -msgstr "" -"Project-Id-Version: samba_3.0.0beta2-1_templates\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2004-03-13 21:32-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Debian L10n Catalan <debian-l10n-catalan@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Joc de caràcters pel sistema de fitxers de Unix" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"El fitxer smb.conf actual té configurat un \"character set\". En la versió " -"3.0 de Samba, aquesta opció es reemplaça per l'opció \"unix charset\". " -"Especifiqueu el joc de caràcters que voleu utilitzar per a aquesta nova " -"opció que controla el mode que el Samba interpreta els noms de fitxers del " -"sistema de fitxers." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Si deixeu aquesta opció en blanc no es modificarà el smb.conf." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Joc de caràcters pels clients DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"El fitxer smb.conf actual té configurat un \"client code page\". En la " -"versió 3.0 de Samba, aquesta opció es reemplaça per l'opció \"dos charset\". " -"L'opció per defecte és suficient en la majoria del casos. Recordeu que " -"aquesta opció no és necessària pel suport dels clients de Windows, només és " -"pels clients de DOS. Si deixeu aquesta opció en blanc no es canviarà el smb." -"conf." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"Voleu modificar el smb.conf perquè utilitza els paràmetres de configuració " -"del WINS del DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si el vostre ordinador obté la informació referent a la IP a través d'un " -"servidor de DHCP, aquest també li donarà informació sobre els servidors de " -"WINS (\"servidors de nom de NetBIOS\") presents a la xarxa. Aquesta opció " -"precisa d'una modificació del fitxer smb.conf per tal que els paràmetres de " -"WINS obtinguts a través del DHCP s'obtinguin a través de la lectura de /etc/" -"samba/dhcp.conf" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Per beneficiar-vos d'aquesta característica cal que tingueu instal·lat el " -"paquet dhcp3-client." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Voleu configurar el smb.conf a través del debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"La resta de la configuració del Samba tracta amb qüestions que afecten els " -"paràmetres del fitxer de configuració els programes de Samba /etc/samba/smb." -"conf. La versió actual del smb.conf conté una línia 'include' o una opció " -"que abarca múltiples línies que podria confondre al debconf i precisa de la " -"seva edició manual per poder-lo fer funcionar de nou." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si no utilitzeu el debconf per configurar el smb.conf, haureu de gestionar " -"manualment qualsevol canvi de la configuració, i no us podreu beneficiar de " -"les millores. La seva utilització és recomenable en cas que sigui possible." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Grup de treball/nom del domini?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Aquesta opció defineix en quin grup de treball apareixerà el vostre servidor " -"quan ho consultin els clients. Recordeu que aquest paràmetre també controla " -"el nom de domini utilitzat pel paràmetre de configuració security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Voleu utilitzar l'encriptació de contrasenyes?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Els clients de Windows més recents es comuniquen amb els servidors de Samba " -"utilitzant contrasenyes encriptades. Si voleu utilitzar contrasenyes amb " -"text pla, haureu de modificar el vostre registre de Windows. És recomanable " -"utilitzar contrasenyes encriptades. Si ho feu, assegureu-vos de tenir un " -"fitxer /etc/samba/smbpasswd vàlid i que hi especifiqueu la contrasenya de " -"cada usuari utilitzant l'ordre smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" -"Es crea la base de dades de contrasenyes de Samba, /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"El Samba s'ha de configurar perquè utilitzi contrasenyes encriptades per tal " -"que sigui compatible amb la majoria de versions de Windows per defecte. Això " -"implica que les contrasenyes d'usuari s'emmagatzemin a un fitxer diferent " -"del /etc/passwd. Aquest fitxer es pot crear automàticament, però les " -"contrasenyes s'han d'afegir manualment (per vós o per l'usuari) executant " -"l'ordre smbpasswd i cal que us organitzeu per tenir-lo actualitzat en un " -"futur. Si no el creeu, haureu de reconfigurar el Samba (i probablement els " -"vostres ordinadors clients) per tal que utilitzin contrasenyes de text pla. " -"Per més informació feu una ullada a /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html del paquet samba-doc." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "S'han desplaçat els fitxers de registre de Samba." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Els fitxers de registre dels dos dimonis de Samba (nmbd i smbd) es desen a /" -"var/log/samba des de la primera versió dels paquets de Samba 2.2 per Debian. " -"Els noms dels fitxers són, respectivament, log.nmbd i log.smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Els fitxers de registre antics que estaven a /var/log/ es desplacen a la " -"nova ubicació." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'execució del nmbd a través del inetd ja no estarà suportada." - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"El vostre sistema estava prèviament configurat perquè inicies el nmbd i el " -"smbd a través del inetd. A partir de la versió 2.999+3.0alpha20-4 el nmbd no " -"es pot iniciar a través del inetd. Si heu modificat la seqüència " -"d'arrencada /etc/init.d/samba, l'haureu de modificar manualment per tal que " -"s'iniciï com a dimoni." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "dimonis, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Com voleu executar el Samba?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"El dimoni de Samba pot executar-se com un dimoni normal o des del inetd. És " -"recomanable executar-lo com un dimoni." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Es desplaça etc/samba/smbpasswd a /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"El Samba 3.0 introdueix una interfície de base de dades de SAM més nova i " -"completa que reemplaça el fitxer /etc/samba/smbpassd. Voleu que es migri el " -"fitxer smbpasswd a /var/lib/samba/passdb.tdb? Si la vostra intenció és " -"utilitzar un altre pdb (ex, LDAP), haurieu de respondre 'no' aquí." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "El vostre smb.conf es reescriurà" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"El SWAT reescriurà el vostre fitxer smb.conf. Reorganitzarà les entrades i " -"suprimirà els comentaris i les opcions include= i copy=. Si teniu un smb." -"conf molt elaborat feu una còpia de seguretat o no utilitzeu el SWAT." diff --git a/packaging/Debian/debian-sarge/po/cs.po b/packaging/Debian/debian-sarge/po/cs.po deleted file mode 100644 index 88e87c4418..0000000000 --- a/packaging/Debian/debian-sarge/po/cs.po +++ /dev/null @@ -1,289 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2004-03-05 12:04+0100\n" -"Last-Translator: Miroslav Kure <kurem@debian.cz>\n" -"Language-Team: Czech <provoz@debian.cz>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-2\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Znaková sada pro unixový souborový systém" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Momentálnì máte ve svém smb.conf nastavenou volbu \"character set\". V Sambì " -"3.0 je tato volba nahrazena volbou \"unix charset\". Zadejte, prosím, " -"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Tímto nastavíte, jak má " -"Samba interpretovat názvy souborù v souborovém systému." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Pokud nezadáte nic, vá¹ smb.conf se nezmìní." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Znaková sada pro DOSové klienty." - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Momentálnì máte ve svém smb.conf nastavenou volbu \"client code page\". V " -"Sambì 3.0 je tato volba nahrazena volbou \"dos charset\". Zadejte, prosím, " -"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Ve vìt¹inì pøípadù " -"postaèuje implicitní hodnota. Tato volba není potøebná pro Windowsové " -"klienty, pouze pro DOSové klienty. Pokud nezadáte nic, vá¹ smb.conf se " -"nezmìní." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Upravit smb.conf, aby pou¾íval WINS nastavení z DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Pokud vá¹ poèítaè získává IP adresu z DHCP serveru, mù¾ete vám tento server " -"nabízet také informace o WINS serverech (jmenných serverech NetBIOSu), které " -"jsou dostupné ve va¹í síti. To vy¾aduje zásah do souboru smb.conf, kde se " -"nastaví, aby se informace o WINS serverech naèítaly ze souboru /etc/samba/" -"dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Pro vyu¾ití této vlastnosti musíte mít nainstalovaný balík dhcp3-client." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Konfigurovat smb.conf pøes debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Zbytek konfigurace Samby se zabývá otázkami, které mìní parametry v /etc/" -"samba/smb.conf, co¾ je soubor pou¾ívaný pro nastavení programù nmbd a smbd " -"(dohromady tvoøí Sambu). Vá¹ stávající smb.conf obsahuje øádek 'include' " -"nebo volbu, která se táhne pøes více øádkù, co¾ mù¾e zmást debconf a mù¾e " -"zpùsobit, ¾e pro znovuzprovoznìní Samby budete muset upravit smb.conf ruènì." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Pokud pro konfiguraci smb.conf nepou¾íváte debconf, budete muset zvládnout " -"v¹echna nastavení sami a nebudete moci vyu¾ívat výhod pravidelných vylep¹ení " -"tohoto souboru. Z tohoto pohledu je pou¾ití debconf doporuèená volba." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Skupina/Doménové jméno?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Zde mù¾ete zadat jméno skupiny, do které má server patøit. Tímto parametrem " -"také nastavíte doménové jméno pou¾ívané s nastavením security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Pou¾ít ¹ifrování hesel?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Souèasní windowsoví klienti pou¾ívají pøi komunikaci se SMB servery " -"za¹ifrovaná hesla. Pokud chcete pou¾ít hesla neza¹ifrovaná, musíte zmìnit " -"jeden parametr v registrech systému Windows. Doporuèujeme pou¾ívat " -"za¹ifrovaná hesla. Hesla mù¾ete jednotlivým u¾ivatelùm pøidat pøíkazem " -"smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Vytvoøit databázi hesel /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Pro dosa¾ení co nejvìt¹í kompatibility s vìt¹inou verzí systému Windows musí " -"být Samba nastavena, aby pou¾ívala ¹ifrovaná hesla. To vy¾aduje, aby byla " -"hesla uchována mimo souboru /etc/passwd. Po¾adovaný soubor mù¾ete nechat " -"vytvoøit automaticky, ale hesla do nìj musí být pøidána ruènì programem " -"smbpasswd (buï vámi, nebo u¾ivatelem) a také jej musíte udr¾ovat " -"aktualizovaný. Pokud jej nevytvoøíte, budete muset nastavit Sambu (a " -"pravdìpodobnì také klienty), aby pou¾ívala ne¹ifrovaná hesla. Podrobnosti " -"naleznete v /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html z balíku samba-" -"doc." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Logovací soubory Samby se pøesunuly." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Od prvních debianích balíèkù Samby verze 2.2 jsou logovací soubory obou " -"serverù (nmbd a smbd) umístìny ve /var/log/samba/. Názvy pøíslu¹ných souborù " -"jsou log.nmbd a log.smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Staré soubory z adresáøe /var/log/ budou pøesunuty na nové místo automaticky." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Spou¹tìní nmbd z inetd ji¾ není podporováno" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Vá¹ systém byl pùvodnì nastaven, aby spou¹tìl nmbd a smbd z inetd. Od verze " -"2.999+3.0.alpha20-4 ji¾ nelze nmbd spou¹tìt z inetd. Pokud jste si upravili " -"startovací skript /etc/init.d/samba, mo¾ná jej nyní budete muset upravit pro " -"korektní start nmbd." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "démoni, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Jak chcete spou¹tìt Sambu?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Server Samby smbd mù¾e bì¾et jako obyèejný démon (doporuèeno), nebo se mù¾e " -"spou¹tìt z inetd." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Pøesunout /etc/samba/smbpasswd do /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 zavedla nové, kompletnìj¹í rozhraní k SAM databázi, je¾ pøekonává " -"pùvodní soubor /etc/samba/smbpasswd. Chcete pøevést stávající soubor " -"smbpasswd na /var/lib/samba/passwd.tdb? Pokud plánujete pou¾ít jinou pdb " -"databázi (tøeba LDAP), mìli byste odponìdìt 'ne'." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Vá¹ smb.conf bude pøepsán!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT pøepí¹e vá¹ soubor smb.conf. Mj. pøeskládá polo¾ky a sma¾e v¹echny " -"komentáøe a volby include= a copy=. Pokud máte pracnì odladìný smb.conf, tak " -"si jej zazálohujte, nebo nepou¾ívejte SWAT!" diff --git a/packaging/Debian/debian-sarge/po/da.po b/packaging/Debian/debian-sarge/po/da.po deleted file mode 100644 index 5d0aa55114..0000000000 --- a/packaging/Debian/debian-sarge/po/da.po +++ /dev/null @@ -1,290 +0,0 @@ -# translation of da.po to Danish -# translation of samba Debian debconf template to Danish -# Claus Hindsgaul <claus_h@image.dk>, 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: da\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2004-02-15 17:23+0100\n" -"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n" -"Language-Team: Danish <dansk@klid.dk>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.0.2\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Tegnsæt til Unix-filsystemet" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Du har en \"character set\"-indstilling i din smb.conf. I Samba 3.0 " -"erstattes denne af en ny indstilling, \"unix charset\". Angiv det " -"tegnsæt, du ønsker at bruge i denne nye indstilling, som styrer " -"hvordan Samba tolker filnavne pÃ¥ systemet." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Hvis du ikke skriver noget her, vil din smb.conf ikke blive ændret." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Tegnsæt til DOS-klienter" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Du har en \"client code page\"-indstilling i din smb.conf. I Samba " -"3.0 erstattes denne af en ny indstilling, \"dos charset\". Angiv det " -"tegnsæt, du ønsker at bruge i denne nye indstilling. I de fleste tilfælde " -"vil det forvalgte være nok. Bemærk at denne indstilling ikke kræves " -"for at understøtte Windows-klienter; den gælder kun DOS-klienter. Hvis " -"du ikke skriver noget her, vil smb.conf ikke blive ændret." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Ret smb.conf, sÃ¥ den benytter WINS-indstillinger fra DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Hvis din computer fÃ¥r IP-adresseoplysninger fra en DHCP-server pÃ¥ " -"netværket, kan DHCP-serveren ogsÃ¥ give oplysninger om WINS-servere " -"(\"NetBIOS navneservere\") pÃ¥ netværket. Dette kræver en ændring i din " -"smb.conf-fil, sÃ¥ WINS-indstillingerne fra DHCP-serveren automatisk " -"indlæses fra /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Ud skal have pakken dhcp3-client installeret for at kunne udnytte denne " -"funktion." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Sæt smb.conf op med debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Resten af Samba-opsætningen drejer sig om spørgsmÃ¥l om indstillingerne " -"i filen /etc/samba/smb.conf, som benyttes til at sætte Samba-programmerne " -"(nmbd og smbd) op. Din nuværende smb.conf indeholder en 'include'-linje " -"eller en indstilling, der fylder flere linjer, hvilket kan forvirre " -"debconf og kræve at du redigerer din smb.conf selv for at fÃ¥ Samba til " -"at fungere igen." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Hvis du ikke bruger debconf til at sætte smb.conf op, mÃ¥ du selv hÃ¥ndtere " -"ændringer i opsætningen, og vil ikke kunne drage nytte af de løbende " -"forbedringer i opsætningen. Derfor anbefales brugen af debconf, hvis " -"det er muligt." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Navn pÃ¥ arbejdsgruppe/domæne?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Dette styrer hvilken arbejdsgruppe din server til tilhøre, nÃ¥r den bliver " -"spurgt af klienter. Bemærk at dette ogsÃ¥ styrer det domænenavn, der bruges " -"med indstillingen \"security=domain\"." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Kryptér adgangskoder?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Nyere Windows-klienter kommunikerer med SMB-servere med krypterede " -"adgangskoder. Hvis du vil bruge adgangkoder i klar tekst, bliver du " -"nødt til at ændre en indstilling i Windows' registreringsdatabase. Det " -"anbefales at du bruger krypterede adgangskoder. Hvis du gør, sÃ¥ sørg for " -"at du har en gyldig /etc/samba/smbpasswd-fil og at du her angiver " -"adgangskoder for hver bruger med kommandoen smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Opret samba-adgangskodedatabasen /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"For at være kompatibel med standardindstillingerne i de fleste udgaver af " -"Windows, skal Samba være sat op til at benytte krypterede adgangskoder. " -"Det kræver at brugernes adgangskoder gemmes i en anden fil end /etc/passwd. " -"Denne fil kan oprettes automatisk, men adgangskoderne er nødt til at blive " -"tilføjet manuelt (af dig eller af brugeren) ved at køre smbpasswd, og du " -"skal holde den opdateret i fremtiden. Hvis du ikke opretter den, er du nødt " -"til at sætte samba (og sikkert ogsÃ¥ dine klientmaskiner) op til at benytte " -"adgangskoder i klar tekst. Se /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html " -"i pakken samba-doc for flere detaljer." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Sambas logfiler er flyttet." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Fra og med de første Samba 2.2-Debianpakker, bliver begge Samba-dæmonernes " -"(nmbd og smbd) logfiler gemt i /var/log/samba/. Filernes navne er log.nmbd " -"og log.smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De gamle logfiler, der var i /var/log vil blive flyttet til den nye placering " -"for dig." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Kørsel af nmbd fra inetd understøttes ikke længere." - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Dit system var tidligere sat op til at starte nmbd og smbd fra inetd. " -"Fra og med version 2.999+3.0.alpha20-4 kan nmbd ikke længere startes med inetd. " -"Hvis du har rettet din opstartsskript /etc/init.d/samba, kan du være nødt " -"til at justere det manuelt nu, sÃ¥ nmbd bliver startet." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "dæmoner, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hvordan skal Samba køres?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba-dæmonen smbd kan køre som en almindelig dæmon eller fra inetd. Det " -"anbefales at køre den som dæmon." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Flyt /etc/samba/smbpasswd til /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 har en nyere og mere komplet SAM-databasegrænseflade, som " -"erstatter filen /etc/samba/smbpasswd. Vil du have din eksisterende " -"smbpasswd-fil overført til /var/lib/samba/passdb.tdb?`Hvis du i stedet " -"planlægger at bruge en anden pdb-hÃ¥ndtering (f.eks. LDAP), bør du afvise " -"dette." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Din smb.conf vil blive omskrevet!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT vil overskrive din smb.conf-fil. Den vil flytte rundt pÃ¥ linjerne " -"og slette alle kommentarer, og linjer med \"include=\" og \"copy=\". " -"Hvis du har brugt tid pÃ¥ at lave din egen smb.conf, sÃ¥ tag en " -"sikkerhedskopi eller undlad at benytte SWAT!" - diff --git a/packaging/Debian/debian-sarge/po/es.po b/packaging/Debian/debian-sarge/po/es.po deleted file mode 100644 index 0d1d1a770d..0000000000 --- a/packaging/Debian/debian-sarge/po/es.po +++ /dev/null @@ -1,298 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-07-02 21:51-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Juego de caracteres para el sistema de ficheros Unix" - -# -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Actualmente hay una opción de \"character set\" en smb.conf. En Samba 3.0 " -"esta opción ha sido reemplazado por una opción nueva: \"unix charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción nueva, " -"que controla cómo Samba interpretará los nombres en el sistema de ficheros." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Si deja en blanco este campo, no se cambiará smb.conf." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Juego de caracteres para los clientes DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Actualmente hay una opción de \"client code page\" en smb.conf. En Samba " -"3.0 esta opción ha sido reemplazado por la opción \"dos charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción " -"nueva. Esta opción no se necesita en absoluto para clientes Windows; es " -"exclusivamente para los clientes DOS. Si deja en blanco este campo, no se " -"cambiará smb.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"¿Modificar smb.conf para usar la configuración WINS que proviene de DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si su sistema recibe la dirección IP desde un servidor DHCP en la red, el " -"servidor DHCP también puede proveerle informaciones sobre los servidores de " -"WINS que haya en la red. Esto requiere un cambio en el fichero smb.conf " -"para que la configuración de WINS proveniente de DHCP se lea automaticamente " -"de /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Hay que instalar el paquete dhcp3-client para aprovechar esta funcionalidad." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "¿Configurar smb.conf mediante debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"El resto de la configuración de Samba trata sobre cuestiones que afectan al " -"contenido de /etc/samba/smb.conf, que es el fichero utilizado para " -"configurar los programas de Samba (nmbd y smbd). Su smb.conf actual contiene " -"una lÃnea 'include' o una opción que atraviesa más de una lÃnea, asà que " -"debconf puede dejarlo con un smb.conf descompuesto, requiriendo que lo " -"arregle a mano." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si no usa debconf para configurar smb.conf, tendrá que cuidar a mano " -"cualquier cambio a la configuración de Samba y no disfrutará de aumentos " -"periódicos de configuración. Por eso se recomienda el uso de debconf cuando " -"sea posible." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nombre del dominio o del grupo de trabajo" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Es el grupo de trabajo en el que aparecerá su servidor cuando se lo " -"pregunten los clientes de la red. Este parámetro también controla el nombre " -"de dominio que se usa con la configuración security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "¿Utilizar contraseñas cifradas?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Los clientes Windows más modernos se comunican con los servidores SMB " -"utilizando contraseñas cifradas. Si quiere usar contraseñas en texto plano, " -"tendrá que cambiar un parámetro en el registro de Windows. Es muy " -"recomendable usar cifrado en las contraseñas. Si elige hacerlo, compruebe " -"que tiene un fichero /etc/samba/smbpasswd válido y que ha puesto las " -"contraseñas con el programa smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "¿Crear el base de dados de contraseñas /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para manterner la compatibilidad con el comportamiento por defecto de la " -"mayoria de los sistemas Windows, hay que configurar Samba para que use " -"contraseñas cifradas, lo cual requiere la creación de un fichero, distinto " -"del /etc/passwd, donde se guarden las contraseñas de los usuarios. El " -"fichero se puede crear automaticamente, aunque es necesario añadir las " -"contraseñas manualmente (por usted o por el usuario) mediante el programa " -"'smbpasswd', y debe encargarse de mantener las contraseñas al dÃa. Si no " -"crea este fichero, es imprescindible configurar Samba (y posiblemente los " -"sistemas Windows) para que use contraseñas no cifradas. Véa /usr/share/doc/" -"samba-doc/htmldocs/ENCRYPTION.html del paquete samba-doc para más " -"información." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Se han cambiado de lugar los ficheros de registro de Samba." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"A partir de los primeros paquetes Debian de Samba 2.2, los ficheros de " -"registro de los dos demonios del Samba (nmbd y smbd) se encuentran en /var/" -"log/samba/. Los nombres de estos ficheros son log.nmbd y log.smbd, para " -"nmbd y smbd respectivamente." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Los ficheros de registro antiguos que habÃa en /var/log se moverán " -"automáticamente a su nueva ubicación." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Ya no se puede ejecutar nmbd desde el inetd" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Su sistema estaba configurado anteriormente para ejectuar nmbd y smbd desde " -"inetd. A partir de la version 2.999+3.0.alpha20-4, nmbd ya no se ejecuta " -"desde inetd. Si ha modificado el script de arranque /etc/init.d/samba, " -"puede que tenga que editarlo ahora para que nmbd se ejecute." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "demonios, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "¿Cómo quiere que se ejecute Samba?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"El servicio Samba smbd puede ejecutarse como demonio normal o desde el " -"inetd. Se recomienda que se ejecute como demonio independiente." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" -"¿Convertir el fichero /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -#, fuzzy -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"La versión 3.0 de Samba introduce un nuevo base de dados \"SAM\" más " -"completo que suplanta al fichero /etc/samba/smbpasswd. ¿Quiere que el " -"fichero corriente smbpasswd sea convertido en /var/lib/samba/passdb.tdb? Si " -"pretende usar otro " - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "¡Se sobrescribirá su configuración smb.conf!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-sarge/po/fr.po b/packaging/Debian/debian-sarge/po/fr.po deleted file mode 100644 index 6be14c19b4..0000000000 --- a/packaging/Debian/debian-sarge/po/fr.po +++ /dev/null @@ -1,301 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-07-02 21:52-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: French <debian-l10n-french@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-15\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Jeu de caractères pour les systèmes de fichiers Unix" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Une instruction « character set » (jeu de caractères) est utilisée dans " -"votre fichier smb.conf. Avec Samba 3.0, cette option est remplacée par une " -"nouvelle option, « unix charset » (jeu de caractères Unix). Veuillez " -"indiquer le jeu de caractères que vous voulez utiliser avec cette option, " -"qui permet d'interpréter les noms de fichiers sur le système." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Le fichier smb.conf ne sera pas modifié si vous laissez cette option sans " -"réponse." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Jeu de caractères pour les clients DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Votre fichier smb.conf contient une option « client code page » (page de " -"codes du client). Avec Samba 3.0, cette option a été remplacée par l'option " -"« dos charset » (jeu de caractères DOS). Veuillez indiquer le jeu de " -"caractères que vous voulez utiliser avec la nouvelle option. En général le " -"jeu de caractères choisi par défaut est suffisant. Veuillez noter que cette " -"option ne sert pas pour les clients Windows mais seulement pour les clients " -"DOS. Le fichier smb.conf ne sera pas modifié si vous laissez cette option " -"sans réponse. " - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modifier smb.conf pour utiliser les paramètres WINS fournis par DHCP ?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si votre ordinateur obtient ses paramètres IP à partir d'un serveur DHCP du " -"réseau, ce serveur peut aussi fournir des informations sur les serveurs WINS " -"(serveurs de noms NetBIOS) présents sur le réseau. Une modification du " -"fichier smb.conf est nécessaire afin que les réglages WINS fournis par le " -"serveur DHCP soient lus dans /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "Pour cela, le paquet dhcp3-client doit être installé." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Voulez-vous configurer smb.conf avec debconf ?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"La suite de la configuration de Samba pose des questions sur des paramètres " -"de /etc/samba/smb.conf, le fichier utilisé pour configurer les programmes de " -"Samba (nmbd et smbd). Votre fichier actuel contient une ligne « include » ou " -"une option qui s'étale sur plusieurs lignes : cela peut perturber debconf et " -"il vaut mieux gérer manuellement le contenu de ce fichier." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si vous n'utilisez pas debconf pour configurer smb.conf, vous devrez vous-" -"même gérer les modifications de configuration et vous ne pourrez pas " -"bénéficier des améliorations faites dans la configuration. Si possible, il " -"est conseillé d'utiliser debconf." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Groupe de travail et nom de domaine ?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Ce paramètre indique le groupe de travail où les clients trouveront le " -"serveur. Il indique aussi le nom de domaine utilisé par le paramètre " -"« security=domain »." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Voulez-vous chiffrer les mots de passe ?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Des clients Windows récents communiquent avec les serveurs SMB en utilisant " -"des mots de passe chiffrés. Si vous voulez utiliser des mots de passe sans " -"chiffrement, vous devez modifier un paramètre dans le registre de Windows. " -"Il est recommandé d'utiliser des mots de passe chiffrés. Si vous le faites, " -"n'oubliez pas de créer un fichier /etc/samba/smbpasswd et d'y mettre les " -"mots de passe de tous les utilisateurs qui se servent de la commande " -"smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Faut-il créer une base de données /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Pour préserver la compatibilité avec le comportement par défaut de la " -"plupart des systèmes Windows, Samba doit utiliser les mots de passe " -"chiffrés. Cela exige la création d'un fichier, distinct du fichier /etc/" -"passwd, pour mettre les mots de passe des utilisateurs. Ce fichier peut être " -"créé automatiquement, mais quelqu'un (vous ou l'utilisateur) devra ajouter " -"les mots de passe manuellement en utilisant la commande smbpasswd ; et vous " -"devrez maintenir à jour ce fichier. Si vous ne voulez pas créer le fichier " -"maintenant, Samba (et peut-être les ordinateurs Windows) devra utiliser des " -"mots de passe non chiffrés. Voyez /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html dans le paquet samba-doc pour plus de détails." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Les fichiers-journaux de Samba ont changé de place." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"À partir des premiers paquets de Samba 2.2 pour Debian, les fichiers-" -"journaux des démons nmbd et smbd se trouvent dans /var/log/samba/. Les noms " -"de ces fichiers sont log.nmbd et log.smbd pour, respectivement, nmbd et smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Les anciens fichiers-journaux dans /var/log/ seront mis au bon endroit." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'utilisation de nmbd à partir d'inetd n'est plus supportée" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Votre système lançait nmbd et smbd à partir d'inetd. Depuis la version 2.999" -"+3.0.alpha20-4, on ne peut plus exécuter nmbd à partir d'inetd. Si vous avez " -"modifié le script de lancement /etc/init.d/samba, vous avez peut-être besoin " -"de le corriger manuellement pour permettre le lancement de nmbd. " - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "démons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Comment voulez-vous lancer Samba ?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Le service de Samba smbd peut s'exécuter en tant que démon classique ou bien " -"être lancé par inetd. L'approche recommandée est qu'il s'exécute en tant que " -"démon." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Faut-il convertir /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Avec Samba 3.0, une nouvelle interface pour les bases de données SAM, plus " -"complète, vient remplacer le fichier /etc/samba/smbpasswd. Voulez-vous que " -"votre fichier existant soit remplacé par /var/lib/samba/passdb.tdb ? Si vous " -"envisagez d'utiliser une autre interface d'authentification (p.ex. LDAP), " -"refusez la proposition maintenant." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Ré-écriture de votre fichier smb.conf !" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT va modifier votre fichier smb.conf. Les entrées seront réorganisées et " -"les commentaires détruits ainsi que les entrées « include = » et « copy = ». " -"Si votre smb.conf était soigneusement construit, sauvegardez-le ou " -"n'utilisez pas SWAT !" diff --git a/packaging/Debian/debian-sarge/po/it.po b/packaging/Debian/debian-sarge/po/it.po deleted file mode 100644 index 07f505604e..0000000000 --- a/packaging/Debian/debian-sarge/po/it.po +++ /dev/null @@ -1,287 +0,0 @@ -# samba po-debconf translation to italian
-# Copyright (C) 2004 Software in the Public Interest
-# This file is distributed under the same license as the samba package.
-# Luca Monducci, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba 3.0.7 debconf templates\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-12-03 21:10+0100\n"
-"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
-"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Set di caratteri per il filesystem Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf. In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Attualmente in smb.conf è configurato il «character set», in Samba 3.0, "
-"questa opzione è sostituita da una nuova opzione «unix character». "
-"Specificare il set di caratteri che si desidera usare per questa opzione "
-"che controlla come Samba interpreta i nomi dei file sul file system."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Lasciando vuoto questo valore smb.conf non verrà modificato."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Set di caratteri per i client DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf. In Samba "
-"3.0, this option is replaced by the option \"dos charset\". Please specify "
-"the character set you wish to use for this new option. In most cases, the "
-"default chosen for you will be sufficient. Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients. If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Attualmente in smb.conf è configurato il «client code page», in Samba 3.0, "
-"questa opzione è sostituita dall'opzione «dos character». Specificare il "
-"set di caratteri che si desidera usare per questa opzione. In molti casi "
-"il valore predefinito è sufficiente. Notare che questa opzione non è "
-"necessaria per i client Windows, invece è specifica per i client DOS. "
-"Lasciando vuoto questo valore smb.conf non verrà modificato."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Modificare smb.conf per usare le impostazioni WINS da DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network. This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Se il computer prende le informazioni sull'indirizzo IP da un server DHCP "
-"allora il server DHCP può fornire anche informazioni sui server WINS (i "
-"name server per NetBIOS) presenti nella rete. Questo necessita una modifica "
-"al file smb.conf in modo le impostazioni di WINS fornite dal DHCP siano "
-"lette automaticamente da /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Deve essere installato il pacchetto dhcp3-client per usare questa "
-"funzionalità ."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Configurare smb.conf usando debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Il resto della configurazione di Samba fa delle domande sui parametri di "
-"/etc/samba/smb.conf, il file usato per configurare i programmi di Samba "
-"(nmbd e smbd). L'attuale file smb.conf contiene una riga «include» o una "
-"opzione che si estende su più righe: questo potrebbe confondere debconf "
-"e richiedere una modifica manuale a smb.conf per renderlo nuovamente "
-"funzionante."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements. Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Se non si vuole usare usare debconf per configurare smb.conf si dovranno "
-"gestire tutti i cambiamenti della configurazione da soli e non sarà "
-"possibile beneficiare dei miglioramenti periodici della configurazione; "
-"se possibile, si consiglia l'uso di debconf."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Nome del Workgroup/Dominio"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Questo imposta in quale workgroup apparirà il server quando i client "
-"tenteranno l'accesso. Notare che questo parametro controlla anche il nome "
-"del Dominio usato del parametro «security=domain»."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Usare password cifrate?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"I client Windows recenti comunicano con i server SMB usando password "
-"cifrate. Per usare password in chiaro è necessario cambiare un parametro "
-"nel registro di Windows. Si raccomanda l'uso di password cifrate. In caso "
-"contrario assicurarsi che il file /etc/samba/smbpasswd sia valido e usare "
-"il comando smbpasswd per inserirci le password di ciascun utente."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Creare il database delle password samba /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords. This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future. If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Per essere compatibile con le impostazioni predefinite di molte versioni "
-"di Windows, Samba deve essere configurato per usare password cifrate. "
-"Questo richiede che le password degli utenti siano memorizzate in un file "
-"diverso da /etc/passwd. Questo file può essere creato automaticamente ma "
-"qualcuno (l'amministratore o l'utente) dovrà inserire manualmente e poi "
-"tenere aggiornate le password usando smbpasswd. Se non si crea questo file "
-"sarà necessario riconfigurare samba (e probabilmente anche le macchine "
-"client) per usare password in chiaro. Vedere /usr/share/doc/samba-doc/"
-"htmldocs/ENCRYPTION.html contenuto nel pacchetto samba-doc per ulteriori "
-"dettagli."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "I file di log di Samba sono stati spostati."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"A partire dai primi pacchetti Samba 2.2 per Debian i file di log per "
-"entrambi i demoni Samba (nmbd e smbd) sono memorizzati in /var/log/samba/. "
-"I nomi dei file di log sono log.nmbd e log.smbd rispettivamente per nmbd e "
-"smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"I vecchi file di log in /var/log/ verranno spostati nella nuova directory."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "L'avvio di nmbd da inetd non è più supportato"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd. As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Il sistema è configurato per avviare nmbd e smbd da inetd. Dalla versione "
-"2.999+3.0.alpha20-4 non è più possibile avviare nmbd da inetd. Se si è "
-"modificato lo script di avvio /etc/init.d/samba potrebbe essere necessario "
-"correggerlo a mano in modo da permettere l'avvio di nmbd."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "demoni, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Come avviare Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Il demone Samba smbd può essere avviato come un normale demone oppure da "
-"inetd. Si raccomanda l'avvio come demone."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Spostare /etc/samba/smbpasswd in /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file. Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 introduce una nuova e più completa interfaccia al database SAM che "
-"sostituisce il file /etc/samba/smbpasswd. Si vuole che il file smbpasswd sia "
-"migrato a /var/lib/samba/passdb.tdb? Se si pensa di usare un backend pdb "
-"diverso (p.e. LDAP), si dovrebbe rispondere «no»."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Sovrascrittura di smb.conf!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT sovrascriverà il file smb.conf, verranno riordinate le impostazioni e "
-"verranno cancellati tutti i commenti, le opzioni include= e copy=. Se si è "
-"personalizzato smb.conf tornare indietro e non usare SWAT."
diff --git a/packaging/Debian/debian-sarge/po/ja.po b/packaging/Debian/debian-sarge/po/ja.po deleted file mode 100644 index ce59c6171f..0000000000 --- a/packaging/Debian/debian-sarge/po/ja.po +++ /dev/null @@ -1,292 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-09-09 09:26+0900\n" -"Last-Translator: Kenshi Muto <kmuto@debian.org>\n" -"Language-Team: Japanese <debian-japanese@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=EUC-JP\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Unix ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¸þ¤±¤Îʸ»ú¥»¥Ã¥È" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"character set\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢¤³" -"¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"unix charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£" -"Samba ¤¬¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¥Õ¥¡¥¤¥ë̾¤ò¤É¤Î¤è¤¦¤Ë²ò¼á¤¹¤ë¤«¤òÀ©¸æ¤¹¤ë¤³¤Î¿·¤·" -"¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£" - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "DOS ¥¯¥é¥¤¥¢¥ó¥È¸þ¤±¤Îʸ»ú¥»¥Ã¥È" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"client code page\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢" -"¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"dos charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£¤³¤Î" -"¿·¤·¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤Û¤È¤ó¤É¤Î¾ì" -"¹ç¡¢¥Ç¥Õ¥©¥ë¥È¤ÎÁªÂò¤Î¤Þ¤Þ¤Ç½½Ê¬¤Ç¤·¤ç¤¦¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï Windows ¥¯¥é¥¤¥¢¥ó" -"¥È¥µ¥Ý¡¼¥È¤Ë¤ÏɬÍפʤ¯¡¢DOS ¥¯¥é¥¤¥¢¥ó¥È¤Î¤ß¤Î¤¿¤á¤Ç¤¢¤ë¤³¤È¤òÃí°Õ¤·¤Æ¤ª¤¤Þ" -"¤¹¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "DHCP ¤«¤é WINS ÀßÄê¤ò»È¤¦¤è¤¦ smb.conf ¤òÊѹ¹¤·¤Þ¤¹¤«?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤¬¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î DHCP ¥µ¡¼¥Ð¤«¤é IP ¥¢¥É¥ì¥¹¾ðÊó¤ò¼èÆÀ" -"¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢DHCP ¥µ¡¼¥Ð¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ë¤¢¤ë WINS ¥µ¡¼¥Ð (NetBIOS " -"¥Í¡¼¥à¥µ¡¼¥Ð) ¤Ë¤Ä¤¤¤Æ¤Î¾ðÊó¤òÄ󶡤¹¤ë¤³¤È¤â¤Ç¤¤Þ¤¹¡£DHCP ¤ÇÄ󶡤µ¤ì¤ë WINS " -"ÀßÄê¤Ï /etc/samba/dhcp.conf ¤«¤é¼«Æ°Åª¤ËÆɤ߹þ¤Þ¤ì¤ë¤¿¤á¡¢smb.conf ¥Õ¥¡¥¤¥ë¤ò" -"Êѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"¤³¤Îµ¡Ç½¤ò»È¤¦¤¿¤á¤Ë¤Ï¡¢dhcp3-client ¥Ñ¥Ã¥±¡¼¥¸¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ëɬÍפ¬" -"¤¢¤ê¤Þ¤¹¡£" - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "debconf ¤òÄ̤·¤Æ smb.conf ¤òÀßÄꤷ¤Þ¤¹¤«?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Samba ¤ÎÀßÄê¤Î»Ä¤ê¤ÎÉôʬ¤Ï¡¢Samba ¥×¥í¥°¥é¥à (nmbd ¤ª¤è¤Ó smbd) ¤òÀßÄꤹ¤ë¤Î" -"¤Ë»È¤¦¥Õ¥¡¥¤¥ë /etc/samba/smb.conf ¤Ë¤¢¤ë¥Ñ¥é¥á¡¼¥¿¤Ë±Æ¶Á¤¹¤ë¼ÁÌä¤Ç¤¹¡£¸½ºß" -"¤Î smb.conf ¤Ï¡¢'include' ¹Ô¤Þ¤¿¤ÏÊ£¿ô¹Ô¤Ë¤Þ¤¿¤¬¤ë¥ª¥×¥·¥ç¥ó¤ò´Þ¤ó¤Ç¤¤¤Þ¤¹¡£" -"¤³¤ì¤Ï debconf ¤òº®Í𤵤»¤ë²ÄǽÀ¤¬¤¢¤ê¡¢ºÆ¤Ó debconf ¤¬ºîÆ°¤¹¤ë¤è¤¦¤Ë¤¹¤Ù¤¯ " -"smb.conf ¤Î¼êÆ°¤Ç¤Î½¤Àµ¤òɬÍפȤ·¤Þ¤¹¡£" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"smb.conf ¤ÎÀßÄê¤Ë debconf ¤ò»È¤ï¤Ê¤¤¾ì¹ç¡¢¤¹¤Ù¤Æ¤ÎÀßÄê¤ÎÊѹ¹¤ò¤¢¤Ê¤¿¼«¿È¤¬ÌÌ" -"Åݤò¸«¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ÏÄê´üŪ¤ÊÀßÄê²þÁ±¤Ë¤Ï¸þ¤¤¤Æ¤¤¤Þ¤»¤ó¡£¤½¤Î¤¿¤á¡¢" -"²Äǽ¤Ê¤é debconf ¤ò»È¤¦¤Î¤¬¤ª´«¤á¤Ç¤¹¡£" - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "¥ï¡¼¥¯¥°¥ë¡¼¥×/¥É¥á¥¤¥ó̾¤Ï²¿¤Ç¤¹¤«?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"¤³¤ì¤Ï¥¯¥é¥¤¥¢¥ó¥È¤«¤é¾È²ñ¤µ¤ì¤¿ºÝ¤Ë¤¢¤Ê¤¿¤Î¥µ¡¼¥Ð¤¬¸½¤ì¤ë¥ï¡¼¥¯¥°¥ë¡¼¥×¤òÀ©" -"¸æ¤·¤Þ¤¹¡£¤³¤Î¥Ñ¥é¥á¡¼¥¿¤Ï security=domain ÀßÄ꤬»È¤ï¤ì¤¿¤È¤¤Î¥É¥á¥¤¥ó̾¤âÀ©" -"¸æ¤·¤Þ¤¹¡£" - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "¥Ñ¥¹¥ï¡¼¥É¤Î°Å¹æ²½¤ò»È¤¤¤Þ¤¹¤«?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"ºÇ¶á¤Î Windows ¥¯¥é¥¤¥¢¥ó¥È¤Ï°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ SMB ¥µ¡¼¥Ð¤È¤ä¤ê" -"¼è¤ê¤·¤Þ¤¹¡£¥¯¥ê¥¢¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¤¤¿¤¤¾ì¹ç¤Ï¡¢¤¢¤Ê¤¿¤Î Windows ¤Î¥ì¥¸" -"¥¹¥È¥ê¤Î¥Ñ¥é¥á¡¼¥¿¤òÊѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦¤³¤È" -"¤ò¿ä¾©¤·¤Þ¤¹¡£¤³¤¦¤¹¤ë¾ì¹ç¡¢Í¸ú¤Ê /etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤¬¤¢¤ë¤³¤È¤ò" -"³Îǧ¤·¡¢³Æ¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¥³¥Þ¥ó¥É¤ò»È¤Ã¤ÆÀßÄꤷ¤Þ¤¹¡£" - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba ¥Ñ¥¹¥ï¡¼¥É¥Ç¡¼¥¿¥Ù¡¼¥¹ /var/lib/samba/passdb.tdb ¤òºîÀ®¤·¤Þ¤¹¤«?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Windows ¤Î¤Û¤È¤ó¤É¤Î¥Ð¡¼¥¸¥ç¥ó¤Î¥Ç¥Õ¥©¥ë¥È¤È¸ß´¹À¤òÊݤĤ¿¤á¡¢Samba ¤Ï°Å¹æ²½" -"¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤ÆÀßÄꤵ¤ì¤Þ¤¹¡£¤³¤ì¤Ï¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤ò /etc/passwd " -"¤È¤ÏÊ̤Υե¡¥¤¥ë¤Ë³ÊǼ¤¹¤ë¤³¤È¤òɬÍפȤ·¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤Ï¼«Æ°Åª¤ËºîÀ®¤¹¤ë" -"¤³¤È¤¬¤Ç¤¤Þ¤¹¤¬¡¢¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¤ò¼Â¹Ô¤·¤Æ¼êÆ°¤Ç (¤¢¤Ê¤¿¤¢¤ë¤¤¤Ï¥æ¡¼" -"¥¶¤¬) Äɲ䷤ʤ±¤ì¤Ð¤Ê¤é¤º¡¢¾Íè¤ËÅϤäƺǿ·¾õÂÖ¤òÊݤÁ³¤±¤ë¤è¤¦À°¤¨¤Æ¤ª¤¯É¬" -"Íפ¬¤¢¤ê¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤òºîÀ®¤·¤Ê¤¤¾ì¹ç¡¢¥×¥ì¥¤¥ó¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦" -"¤è¤¦ Samba (¤ª¤è¤Ó¤ª¤½¤é¤¯¤¢¤Ê¤¿¤Î¥¯¥é¥¤¥¢¥ó¥È¥Þ¥·¥ó) ¤ÎºÆÀßÄ꤬ɬÍפǤ¹¡£¾Ü" -"ºÙ¤Ë¤Ä¤¤¤Æ¤Ï¡¢samba-doc ¥Ñ¥Ã¥±¡¼¥¸¤Ë¤¢¤ë /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html ¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£" - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï°ÜÆ°¤µ¤ì¤Þ¤·¤¿¡£" - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Debian ¸þ¤±¤Î Samba 2.2 ¤Î½é´ü¥Ñ¥Ã¥±¡¼¥¸¤«¤é¡¢Î¾ Samba ¥Ç¡¼¥â¥ó (nmbd ¤ª¤è¤Ó " -"smbd) ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï /var/log/samba ¤Ë³ÊǼ¤µ¤ì¤ë¤è¤¦¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¥Õ¥¡¥¤" -"¥ë̾¤Ï nmbd ¤È smbd ¤ÇÊ̸Ĥˤʤë¤è¤¦¡¢log.nmbd ¤ª¤è¤Ó log.smbd ¤È¤Ê¤ê¤Þ¤¹¡£" - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "/var/log/ ¤Ë¤¢¤Ã¤¿¸Å¤¤¥í¥°¥Õ¥¡¥¤¥ë¤Ï¿·¤·¤¤¾ì½ê¤Ë°ÜÆ°¤µ¤ì¤Þ¤¹¡£" - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "inetd ¤«¤é¤Î nmbd ¤Î¼Â¹Ô¤Ï¤â¤¦¥µ¥Ý¡¼¥È¤µ¤ì¤Þ¤»¤ó" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"¤¢¤Ê¤¿¤Î¥·¥¹¥Æ¥à¤Ë¤Ï inetd ¤«¤é nmbd ¤ª¤è¤Ó smbd ¤òµ¯Æ°¤¹¤ë°ÊÁ°¤ÎÀßÄ꤬¤¢¤ê¤Þ" -"¤¹¡£¥Ð¡¼¥¸¥ç¥ó 2.999+3.0.alpha20-4 °Ê¹ß¤Ç¤Ï¡¢nmbd ¤Ï inetd ¤«¤é¤Ï¤â¤¦µ¯Æ°¤·¤Þ" -"¤»¤ó¡£/etc/init.d/samba ¥¹¥¿¡¼¥È¥¢¥Ã¥×¥¹¥¯¥ê¥×¥È¤òÊѹ¹¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢" -"nmbd ¤¬µ¯Æ°¤¹¤ë¤è¤¦¼êÆ°¤ÇÄ´À°¤¹¤ëɬÍפ¬¤¢¤ë¤Ç¤·¤ç¤¦¡£" - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "¥Ç¡¼¥â¥ó, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "¤É¤Î¤è¤¦¤Ë Samba ¤ò¼Â¹Ô¤·¤¿¤¤¤Ç¤¹¤«?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba ¥Ç¡¼¥â¥ó smbd ¤ÏÄ̾ï¤Î¥Ç¡¼¥â¥ó¤È¤·¤Æ¤Î¼Â¹Ô¤Þ¤¿¤Ï inetd ¤«¤é¤Î¼Â¹Ô¤¬¤Ç¤" -"¤Þ¤¹¡£¥Ç¡¼¥â¥ó¤È¤·¤Æ¼Â¹Ô¤¹¤ë¤Î¤¬¤ª´«¤á¤Î¼êÃʤǤ¹¡£" - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd ¤ò /var/lib/samba/passdb.tdb ¤Ë°ÜÆ°¤·¤Þ¤¹¤«?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 ¤Ç¤Ï¡¢/etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤ËÂå¤ï¤ë¡¢¤è¤ê¿·¤·¤¤¡¢¤è¤ê´°Á´" -"¤Ê SAM ¥Ç¡¼¥¿¥Ù¡¼¥¹¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹¤¬Æ³Æþ¤µ¤ì¤Æ¤¤¤Þ¤¹¡£´û¸¤Î smbpasswd ¥Õ¥¡" -"¥¤¥ë¤ò /var/lib/samba/passdb.tdb ¤Ë°Ü¹Ô¤·¤Þ¤¹¤«? Ê̤Πpdb ¥Ð¥Ã¥¯¥¨¥ó¥É (LDAP " -"¤Ê¤É) ¤òÂå¤ï¤ê¤Ë·×²è¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¤³¤³¤Ç¤Ï '¤¤¤¤¤¨' ¤ÈÅú¤¨¤ë¤Ù¤¤Ç¤¹¡£" - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "¤¢¤Ê¤¿¤Î smb.conf ¤Ï½ñ¤Ä¾¤µ¤ì¤Þ¤¹!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT ¤Ï¤¢¤Ê¤¿¤Î smb.conf ¥Õ¥¡¥¤¥ë¤ò½ñ¤Ä¾¤·¤Þ¤¹¡£SWAT ¤Ï¥¨¥ó¥È¥ê¤òºÆÊÔÀ®¤·¡¢" -"¤¹¤Ù¤Æ¤Î¥³¥á¥ó¥È¤ª¤è¤Ó include= ¤È copy= ¥ª¥×¥·¥ç¥ó¤òºï½ü¤·¤Þ¤¹¡£¿µ½Å¤ËºîÀ®¤µ" -"¤ì¤¿ smb.conf ¤ò»ý¤Ã¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Æ¤ª¤¯¤«¡¢SWAT ¤ò»È¤ï¤Ê¤¤" -"¤Ç¤¯¤À¤µ¤¤!" diff --git a/packaging/Debian/debian-sarge/po/nl.po b/packaging/Debian/debian-sarge/po/nl.po deleted file mode 100644 index 61e8742dbb..0000000000 --- a/packaging/Debian/debian-sarge/po/nl.po +++ /dev/null @@ -1,302 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-08-30 02:03+0100\n" -"Last-Translator: Bart Cornelis <cobaco@linux.be>\n" -"Language-Team: dutch <debian-l10n-dutch@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Karakterset voor Unix bestandsysteem" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"U heeft momenteel een \"karakterset\" ingesteld in uw smb.conf. In Samba 3.0 " -"werd deze optie vervangen door een nieuwe \"unix karakterset\" optie. " -"Gelieve de karakterset die u voor deze nieuwe optie wil gebruiken aan te " -"geven, deze bepaald hoe Samba de bestandsnamen in het bestandsysteem " -"interpreteerd." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Uw smb.conf bestand wordt niet aangepast indien u deze optie leeg laat." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Karakterset voor DOS-clients" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"U heeft momenteel een \"client code pagina\" ingesteld in uw smb.conf. In " -"Samba 3.0 werd deze optie vervangen door de optie \"dos karakterset\". " -"Gelieve de karakterset die u voor deze nieuwe optie wilt gebruiken aan te " -"geven. In de meeste gevallen zal het standaard ingevulde antwoord voldoen. " -"Merk op dat deze optie niet nodig is voor ondersteuning van Windows-clients, " -"enkel voor DOS-clients. Uw smb.conf wordt niet veranderd wanneer u deze " -"optie blank laat." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "smb.conf aanpassen om de WINS instellingen van DHCP te gebruiken?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Indien uw computer zijn ip-addres informatie van een DHCP-server op het " -"netwerk haalt, voorziet deze mogelijks ook informatie betreffende de op het " -"netwerk aanwezige WINS-servers (\"NetBIOS naam servers\").\" Dit vereist een " -"verandering aan uw smb.conf bestand, opdat de door DHCP doorgegeven WINS " -"instellingen automatisch gelezen worden van /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"U dient het dhcp3-client-pakket geïnstalleert te hebben om van deze optie " -"gebruik te maken." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configuratie in smb.conf met debconf beheren?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"De resterende Samba configuratie beslaat parameters in /etc/samba/smb.conf, " -"het configuratiebestand dat gebruikt wordt voor de Samba programmas (nmbd en " -"smbd). Uw huidige smb.conf bevat een 'include' regel of een optie die " -"meerdere regels beslaat, dit kan debconf mogelijks in verwarring brenngen. " -"Indien debconf in verwarring raakt dient u uw smb.conf handmatig aan te " -"passen om samba terug werkend te krijgen." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Indien u geen gebruik maakt van debconf voor het beheer van smb.conf dient u " -"alle configuratie instellingen zelf te doen, en zult u geen voordeel halen " -"uit de periodieke configuratie verbeteringen. Het gebruik van debconf wordt " -"dan ook aangeraden. " - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Werkgroep/Domeinnaam?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Dit bepaald van welke werkgroep uw server deel zal lijken uit te maken bij " -"het beantwoorden van vragen door clients. Merk op dat deze parameter ook de " -"domeinnaam die gebruikt wordt voor de security=domein instelling bepaald." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Wachtwoord versleuteling gebruiken?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Recente Windows clients maken gebruik van versleutelde wachtwoorden voor de " -"communicatie met SMB-servers. Indien u onversleutelde tekst wachtwoorden " -"wilt gebruiken dient u een parameter te veranderen in de Windows registry. " -"Het gebruik van versleutelde wachtwoorden wordt aangeraden. Indien u dit " -"doet zorg er dan voor dat u een geldig /etc/samba/smbpasswd bestand heeft en " -"dat u de wachtwoorden daar voor elke gebruiker met behulp van smbpasswd " -"insteld. " - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba wachtwoord database, /var/lib/samba/passdb.tdb, aanmaken?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Om compatibel te zijn met de standaard instellingen van de meeste " -"Windowsversies dient Samba gebruik te maken van versleutelde wachtwoorden. " -"Dit vereist dat de gebruikerswachtwoorden opgeslagen worden in een bestand " -"dat verschilt van /etc/passwd. Dit bestand kan automatisch aangemaakt " -"worden, maar de wachtwoorden dienen handmatig (door de gebuiker) toegevoegt " -"te worden met het smbpasswd commando. U dient dit bestand in de toekomst ook " -"aktueel te houden. Indien u dit bestand niet aanmaakt zult u samba (en naar " -"alle waarschijnlijkheid de client machines) moeten herconfigureren zodat " -"deze onversleutelde wachtwoorden gebruiken. Zie /usr/share/doc/samba-doc/" -"htmldocs/ENCRYPTION.html uit het samba-doc pakket voor meer details." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba's log bestanden zijn verhuisd." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Vanaf de eerste Debian pakketten vaan Samba versie 2.2 zijn de log bestanden " -"van beide Samba daemons (nmbd en smbd) opgeslagen in /var/log/samba/. De log " -"bestanden voor nmbd en smbd zijn, respectievelijk, log.nmbd en log.smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De oude logbestanden in /var/log worden voor u naar de nieuwe locatie " -"verplaatst." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "nmbd vanuit inetd draaien wordt niet langer ondersteund" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Uw systeem was geconfigureerd om nmbd en smbd vanuit inetd te starten. Vanaf " -"versie 2.999+3.0.alpha20-4 kan nmbd niet langer door inetd gestart worden. " -"Indien u uw /etc/init.d/samba startup-script aangepast had, dient u dit " -"mogelijks aan te passen opdat nmbd zou starten." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hoe wilt u Samba draaien?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"De Samba daemon smbd kan als een normale daemon of via inetd draaien. Als " -"een daemon is de aangeraden aanpak." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd verplaatsen naar /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 introduceert een nieuwe, meer complete SAM databaseinterface die " -"het /etc/samba/smbpasswd bestand overstijgt. \"Wilt u dat ik uw bestaand " -"smbpasswd bestand voor u naar /var/lib/samba/passdb.tdb migreer? Indien u " -"van plan bent om, in plaats hiervan, een ander pdb-backend (e.g. LDAP) te " -"gebruiken dient u hier 'nee' te antwoorden." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Uw smb.conf wordt herschreven!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT zal uw smb.conf bestand herschrijven. Het zal de ingangen anders " -"schikken en alle comments, include= en copy= opties verwijderen. Als u een, " -"met veel zorg, handmatig opgebouwd smb.conf bestand heeft, maak dan een " -"reservekopie of zie van het gebruik van SWAT af! " diff --git a/packaging/Debian/debian-sarge/po/pt.po b/packaging/Debian/debian-sarge/po/pt.po deleted file mode 100644 index fa9f058ca2..0000000000 --- a/packaging/Debian/debian-sarge/po/pt.po +++ /dev/null @@ -1,295 +0,0 @@ -# translation of pt.po to Portuguese -# translation of samba Debian debconf template to Portuguese -# Miguel Figueiredo <elmig@debianpt.org>, 2004. -# - -msgid "" -msgstr "" -"Project-Id-Version: samba 3.0.9-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2005-01-05 19:25+0000\n" -"Last-Translator: Miguel Figueiredo <elmig@debianpt.org>\n" -"Language-Team: Portuguese <traduz@debianpt.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Conjunto de caracteres para sistema de ficheiros UNIX" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Actualmente tem um \"character set\" configurado no seu smb.conf. No " -"Samba 3.0, esta opção é substituÃda por uma nova opção, \"unix charset\". " -"Por favor especifique o conjunto de caracteres para utilizar com esta nova " -"opção, que controla como o Samba interpreta os nomes dos ficheiros no " -"sistema de ficheiros." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Se deixar esta opção vazia, o seu smb.conf não será alterado." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Conjunto de caracteres para clientes DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Actualmente tem um \"client code page\" definido no seu smb.conf. No Samba " -"3.0, esta opção é substituÃda pela opção \"dos charset\". Por favor " -"especifique o conjunto de caracteres que quer utilizar para esta nova opção. " -"Na maioria dos casos, o valor por omissão escolhido para si será suficiente. " -"Note que esta opção não é necessária para suportar clientes em Windows, é " -"apenas para clientes em DOS. Se deixar esta opção vazia, o seu smb.conf " -"não será alterado." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modificar o smb.conf para utilizar definições de WINS a partir de DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Se o seu computador obtém a informação do endereço IP a partir de um " -"servidor de DHCP na rede, o servidor de DHCP pode também fornecer informação " -"acerca de servidores de WINS (\"servidor de nomes NetBIOS\") presentes na " -"rede. Isto requer uma alteração no seu ficheiro smb.conf de modo que as " -"definições de WINS fornecidas por DHCP sejam automaticamente lidas a partir " -"de /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Tem de ter o pacote dhcp3-client instalado para tirar vantagem desta " -"caracterÃstica." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurar o smb.conf através de debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"O resto da configuração de Samba trata de questões que afectam parâmetros " -"em /etc/samba/smb.conf, que é o ficheiro utilizado para configurar os " -"programas de Samba (nmbd e smbd). O seu smb.conf actual contém uma linha " -"'include' ou uma opção que se espalha em multiplas linhas, a qual pode " -"confundir o debconf e necessitar que você edite à mão o smb.conf par o ter " -"novamente operacional." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Se não utilizar o debconf para configurar o smb.conf, terá de lidar você " -"mesmo com quaisquer alterações da configuração, e não poderá tirar partido " -"de melhorias de configuração periódicas. Assim sendo, a utilização do " -"debconf é remomendada se possÃvel." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome do Grupo de trabalho/DomÃnio ?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Isto controla qual o grupo de trabalho em que o seu servidor vai aparecer " -"quando questionado pelos clientes. Note que este parâmetro também controla " -"o nome de DomÃnio quando utilizado com a definição security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Utilizar encriptação de passwords?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Os clientes de Windows recentes comunicam com servidores de SMB utilizando " -"passwords encriptadas. Se deseja utilizar passwords de texto puro você vai " -"necessitar alterar um parâmetro no seu registo do Windows. É recomendado que " -"utilize passwords encriptadas. Se o fizer, assegure-se que tem um ficheiro " -"/etc/samba/smbpasswd válido e que defina lá passwords para cada um dos " -"utilizadores utilizando o comando smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Criar base de dados de passwords samba, /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para ser compatÃvel com valores por omissão na maioria das versões do " -"Windows, o Samba tem de ser configurado para utilizar passwords encriptadas. " -"Isto requer que as passwords de utilizador sejam guardadas num ficheiro " -"separado de /etc/passwd. Este ficheiro pode ser criado automaticamente, mas " -"as passwords têm de ser adicionadas manualmente (por si ou pelo utilizador) " -"executando o comando smbpasswd, e você tem de mantê-las actualizadas no " -"futuro. Se não o criar, você terá de reconfigurar o samba (e provavelmente " -"as máquinas clientes) para utilizar passwords de texto puro. Veja " -"/usr/share/doc/samba-doc/htmldocs/ENCRIPTION.html do pacote samba-doc para " -"mais detalhes." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Os ficheiros de log de Samba foram movidos." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Desde os primeiros pacotes para Debian de Samba 2.2 que os ficheiros de log " -"para ambos os daemons de Samba (nmbd e smbd) são agora guardados em " -"/var/log/samba/. Os nomes dos ficheiros são respectivamente log.nmbd e " -"log.smbd, para o nmbd e smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Os ficheiros de log antigos que estavam em /var/log/ vão ser movidos, para " -"si, para a nova localização." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Executar o nmbd a partir de inetd já não é suportado" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"O seu sistema foi previamente configurado para iniciar o nmbd e smbd a " -"partir de inetd. A partir da versão 2.999+3.0.alpha20-4, o nmbd já não " -"inicia a partir do inetd. Se você modificou o seu script de inicialização " -"/etc/init.d/samba, pode ter de o ajustar agora à mão de modo a que o nmbd " -"inicie." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Como deseja correr o Samba?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"O daemon de Samba smbd pode correr como um daemon normal ou a partir de " -"inetd. Executá-lo como um daemon é a aproximação recomendada." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"" -"O Samba 3.0 introduz um novo e mais completo interface com a base de dados " -"SAM, que suplanta o ficheiro /etc/samba/smbpasswd. Deseja que o seu " -"ficheiro existente smbpasswd seja migrado para /var/lib/samba/passdb.tdb " -"para si? Se planeia utilizar em vez disso outro backend pdb (e.g., LDAP), " -"deve responder aqui 'no'." -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "A sua configuração smb.conf será re-escrita!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"O SWAT irá reescrever o seu ficheiro smb.conf. Irá reordenar as entradas e " -"apagar todos os comentários, e opções include= e copy=. Se tem um smb.conf " -"cuidadosamente trabalhado faça uma cópia de segurança dele ou não utilize " -"o SWAT!" diff --git a/packaging/Debian/debian-sarge/po/pt_BR.po b/packaging/Debian/debian-sarge/po/pt_BR.po deleted file mode 100644 index 1318c3f4e6..0000000000 --- a/packaging/Debian/debian-sarge/po/pt_BR.po +++ /dev/null @@ -1,309 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: debian-l10n-portuguese@lists.debian.org\n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2005-05-10 14:07-0300\n" -"Last-Translator: André Luís Lopes <andrelop@debian.org>\n" -"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Conjunto de caracteres para sistema de arquivos Unix" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Atualmente existe um \"conjunto de caracteres\" (\"character set\") " -"configurado em seu arquivo smb.conf. No Samba 3.0, esta opção foi " -"substituída por uma nova opção, a opção \"unix charset\". Por favor, " -"especifique o conjunto de caracteres a ser usado para essa nova opção, " -"a qual controla como o Samba interpreta nomes de arquivos no sistema de " -"arquivos." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Caso você deixe esta opção em branco, seu arquivo smb.conf não será " -"modificado." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Conjunto de caracteres para clientes DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Atualmente existe um \"código de página do cliente\" (\"client code page\") " -"definido em seu arquivo smb.conf. No Samba 3.0, essa opção foi substituída " -"pela opção \"dos charset\". Por favor, especifique o conjunto de caracteres " -"que você deseja usar para essa nova opção. Note que essa opção não é " -"necessária para suportar clientes Windows, mas sim válida somente para " -"clientes DOS. Caso você deixe essa opção em branco, seu arquivo smb.conf não " -"será modificado." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modificar smb.conf para usar configurações WINS fornecidas via DHCP ?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Caso seu computador obtenha as informações de endereçamento IP de um " -"servidor DHCP na rede, o servidor DHCP poderá também fornecer informações " -"sobre servidor WINS (\"Servidor de Nomes NetBIOS\") presentes na rede. Para " -"que o Samba leia as configurações WINS fornecidas pelo servidor DHCP " -"automaticamente do arquivo /etc/samba/dhcp.conf, é preciso modificar seu " -"arquivo smb.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Você deve possuir o pacote dhcp3-client instalado para poder usar esse " -"recurso." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurar o arquivo smb.conf através do debconf ?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"O restante da configuração do Samba lida com questões que afetam parâmetros " -"no arquivo /etc/samba/smb.conf, que é o arquivo usado para configurar os " -"programas Samba (nmbd e smbd). Seu arquivo smb.conf atual contém uma linha " -"'include' ou uma opção que ocupa diversas linhas, o que pode confundir o " -"debconf e requerer que você edite seu arquivo smb.conf manualmente para " -"torná-lo funcional novamente." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Caso você opte por não usar o debconf para configurar o arquivo smb.conf, " -"será necessário que você lide com quaisquer mudanças de configurações " -"manualmente e você não poderá aproveitar os melhoramentos periódicos de " -"configuração. Por esse motivo, é recomendado usar o debconf, caso seja " -"possível." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome de Domínio/Grupo de Trabalho ?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Este parâmetro controla em qual grupo de trabalho (workgroup) seu servidor " -"parecerá estar quando uma pesquisa pelo mesmo for feita por clientes. Note " -"que este parâmetro também controla o nome de Domínio usado com a " -"configuração security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Usar senhas criptografadas ?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Clientes Windows atuais comunicam-se com servidores SMB usando senhas " -"criptografadas. Caso você queira usar senhas em texto puro você precisará " -"modificar um parâmetro no registro de seu Windows. É recomendado que você " -"use senhas criptografadas. Caso as utilize, certifique-se de possuir um " -"arquivo /etc/samba/smbpasswd válido e que você tenha definido senhas no " -"mesmo para cada usuário, utilizando o comando smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Gerar a base de dados para senhas /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para compatibilidade com os padrões adotados em todas as versões atuais do " -"Windows, o Samba deve ser configurado para usar senhas criptografadas. Isso " -"requer que as senhas dos usuários sejam armazenadas em um arquivo diferente " -"do arquivo /etc/passwd. Esse arquivo pode ser criado automaticamente, mas " -"as senhas devem ser definidas manualmente (por você ou pelo usuário) " -"executando o utilitário smbpasswd. Você deve certificar-se de manter esse " -"arquivo atualizado futuramente. Caso você não crie esse arquivo, você " -"terá que reconfigurar o Samba (e provavelmente suas máquinas clientes) " -"para utilização de senhas em texto puro. Consulte a documentação do pacote " -"samba-doc em /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html para " -"maiores detalhes." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Arquivos de log do Samba foram movidos." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Desde os primeiros pacotes Debian do Samba 2.2, os arquivos de log para " -"ambos os daemons Samba (nmbd e smbd) são armazenados no diretório " -"/var/log/samba/. Os nomes desses arquivos são log.nmbd e log.smbd, para " -"o nmbd e para o smbd, respectivamente." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Os antigos arquivos de log que estavam no diretório /var/log/ serão " -"movidos para o novo local para você." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "A execução do nmbd a partir do inetd não é mais suportada" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Seu sistema foi previamente configurado para iniciar os daemons nmbd e smbd " -"a partir do inetd. Desde a versão 2.999+3.0.alpha20-4, o nmbd não mais será " -"iniciado a partir do inetd. Caso você tenha modificado seu script de " -"inicialização /etc/init.d/samba, você precisará ajustá-lo manualmente " -"agora para que o nmbd seja iniciado." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Como você deseja que o Samba seja executado ?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"O serviço Samba smbd pode ser executado como daemon normal ou a partir do " -"inetd. Executá-lo como daemon é o método recomendado." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"O Samba 3.0 introduziu uma nova e mais completa interface de base de " -"dados SAM que substituiu o arquivo /etc/samba/smbpasswd. Você gostaria " -"que o arquivo smbpasswd existente fosse migrado para " -"/var/lib/samba/passdb.tdb para você ? Caso você planeje usar um outro " -"backend (como LDAP, por exemplo), não aceite mover o arquivo smbpasswd." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Seu arquivo smb.conf será reescrito !" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"O SWAT irá reescrever seu arquivo smb.conf. Ele irá rearrumar as entradas e " -"apagar todos os comentários, opções include= e copy=. Caso você possua um " -"arquivo smb.conf cuidadosamente criado e comentado, faça uma cópia de " -"segurança (backup) do mesmo ou não use o SWAT !" diff --git a/packaging/Debian/debian-sarge/po/ru.po b/packaging/Debian/debian-sarge/po/ru.po deleted file mode 100644 index c40c1879c5..0000000000 --- a/packaging/Debian/debian-sarge/po/ru.po +++ /dev/null @@ -1,223 +0,0 @@ -# translation of samba_3.0.14a-2_ru.po to Russian
-# Yuriy Talakan' <yt@amur.elektra.ru>, 2005.
-msgid ""
-msgstr ""
-"Project-Id-Version: samba_3.0.14a-2_ru\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2005-05-21 21:43+1000\n"
-"Last-Translator: Yuriy Talakan' <yt@amur.elektra.ru>\n"
-"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.9.1\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Кодировка Ð´Ð»Ñ Ñ„Ð°Ð¹Ð»Ð¾Ð²Ð¾Ð¹ ÑиÑтемы Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf. In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr "Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"character set\" в smb.conf. Ð’ Samba 3.0, Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð°Ð¼ÐµÐ½ÐµÐ½Ð° на \"unix charset\". Укажите кодировку, которую вы желаете иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Она отвечает за то, как Samba интерпретирует имена файлов в файловой ÑиÑтеме."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "ЕÑли вы оÑтавите опцию пуÑтой, ваш smb.conf не будет изменен."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Кодировка Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf. In Samba "
-"3.0, this option is replaced by the option \"dos charset\". Please specify "
-"the character set you wish to use for this new option. In most cases, the "
-"default chosen for you will be sufficient. Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients. If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr "Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"client code page\" в smb.conf. Ð’ Samba 3.0, Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð°Ð¼ÐµÐ½ÐµÐ½Ð° на \"dos charset\". Укажите кодировку, которую вы желаете иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Ð’ большинÑтве Ñлучаев Ð·Ð½Ð°Ñ‡ÐµÐ½Ð¸Ñ Ð¿Ð¾ умолчанию будет доÑтаточно. Запомните, что Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð½Ðµ нужна Ð´Ð»Ñ Ð¿Ð¾Ð´Ð´ÐµÑ€Ð¶ÐºÐ¸ клиентов Windows, она только Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS. ЕÑли вы оÑтавите опцию пуÑтой, ваш smb.conf не будет изменен."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Изменить smb.conf Ð´Ð»Ñ Ð¸ÑÐ¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ð½Ð¸Ñ Ð½Ð°Ñтроек WINS из DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network. This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr "ЕÑли ваш компьютер получает информацию о Ñвоем IP-адреÑе от Ñервера DHCP через Ñеть, то DHCP-Ñервер также может предоÑтавлÑÑ‚ÑŒ информацию о Ñерверах WINS(\"Ñерверы имен NetBIOS\"), приÑутÑтвующих в Ñети. Ðто требует внеÑÐµÐ½Ð¸Ñ Ð¸Ð·Ð¼ÐµÐ½ÐµÐ½Ð¸Ð¹ в ваш файл smb.conf, чтобы предоÑтавленные через DHCP наÑтройки WINS автоматичеÑки читалиÑÑŒ из /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr "Чтобы воÑпользоватьÑÑ Ñтой возможноÑтью, вы должны уÑтановить пакет dhcp3-client."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "ÐаÑтроить smb.conf через debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr "ОÑтавшаÑÑÑ Ñ‡Ð°ÑÑ‚ÑŒ наÑтройки Samba ÑоÑтоит из вопроÑов, которые затрагивают параметры в /etc/samba/smb.conf. Ðтот файл иÑпользуетÑÑ Ð´Ð»Ñ Ð½Ð°Ñтройки программ Samba (nmbd и smbd.) Ваш текущий smb.conf Ñодержит Ñтроку 'include' или опцию, ÐºÐ¾Ñ‚Ð¾Ñ€Ð°Ñ ÑоÑтоит из неÑкольких Ñтрок. Ðто может Ñмутить debconf и потребовать от Ð²Ð°Ñ Ñ€ÑƒÑ‡Ð½Ð¾Ð³Ð¾ Ñ€ÐµÐ´Ð°ÐºÑ‚Ð¸Ñ€Ð¾Ð²Ð°Ð½Ð¸Ñ Ð²Ð°ÑˆÐµÐ³Ð¾ smb.conf Ð´Ð»Ñ Ð²Ð¾ÑÑÑ‚Ð°Ð½Ð¾Ð²Ð»ÐµÐ½Ð¸Ñ Ñ€Ð°Ð±Ð¾Ñ‚Ð¾ÑпоÑобноÑти."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements. Therefore, use of debconf is "
-"recommended if possible."
-msgstr "ЕÑли вы не иÑпользуете debconf Ð´Ð»Ñ Ð½Ð°Ñтройки smb.conf, то должны ÑамоÑтоÑтельно позаботитьÑÑ Ð¾Ð±Ð¾ вÑех изменениÑÑ… наÑтроек и не Ñможете воÑпользоватьÑÑ Ð¿Ñ€ÐµÐ¸Ð¼ÑƒÑ‰ÐµÑтвами периодичеÑкого ÑƒÐ»ÑƒÑ‡ÑˆÐµÐ½Ð¸Ñ Ð½Ð°Ñтроек. Таким образом, рекомендуетÑÑ Ð¿Ð¾ возможноÑти иÑпользовать debconf."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Ð˜Ð¼Ñ Ñ€Ð°Ð±Ð¾Ñ‡ÐµÐ¹ группы/домена?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr "Задает рабочую группу, в которой поÑвитÑÑ Ð²Ð°Ñˆ Ñервер, когда его увидÑÑ‚ клиенты. Обратите внимение, что Ñтот параметр также задает Ð¸Ð¼Ñ Ð´Ð¾Ð¼ÐµÐ½Ð°, которое иÑпользуетÑÑ Ð¿Ñ€Ð¸ security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "ИÑпользовать шифрацию паролей?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr "Современные клиенты Windows общаютÑÑ Ñ Ñерверами SMB иÑÐ¿Ð¾Ð»ÑŒÐ·ÑƒÑ ÑˆÐ¸Ñ„Ñ€Ð¾Ð²Ð°Ð½Ð½Ñ‹Ðµ пароли. ЕÑли вы пожелаете иÑпользовать открытые пароли, вам придетÑÑ Ð¸Ð·Ð¼ÐµÐ½Ð¸Ñ‚ÑŒ параметр в рееÑтре Windows. РекомендуетÑÑ Ð¸Ñпользовать шифрованные пароли. Ð’ Ñтом Ñлучае убедитеÑÑŒ, что у Ð²Ð°Ñ Ð¿Ñ€Ð°Ð²Ð¸Ð»ÑŒÐ½Ñ‹Ð¹ файл /etc/samba/smbpasswd и что вы уÑтановили там пароли Ð´Ð»Ñ ÐºÐ°Ð¶Ð´Ð¾Ð³Ð¾ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»Ñ ÐºÐ¾Ð¼Ð°Ð½Ð´Ð¾Ð¹ smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Создать базу данных паролей samba, /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords. This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future. If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr "Ð”Ð»Ñ ÑовмеÑтимоÑти Ñо значением по умолчанию в большинÑтве верÑий Windows, Samba должна быть наÑтроена на иÑпользование шифрованных паролей. Ðто требует Ñ…Ñ€Ð°Ð½ÐµÐ½Ð¸Ñ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»ÑŒÑких паролей в файле, отдельном от /etc/passwd. Ðтот файл может быть Ñоздан автоматичеÑки, но пароли должны быть добавлены вручную (вами или пользователем) поÑредÑтвом запуÑка smbpasswd, и вы должны заботитьÑÑ Ð¾ поддержании его в актуальном ÑоÑтоÑнии в будущем. ЕÑли вы не Ñоздадите его, то должны перенаÑтроить samba (и вероÑтно ваши клиентÑкие машины) на иÑпользование открытых паролей. Более подробно Ñмотрите в /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html из пакета samba-doc."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "log-файлы Samba перемеÑтилиÑÑŒ."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr "ÐÐ°Ñ‡Ð¸Ð½Ð°Ñ Ñ Ð¿ÐµÑ€Ð²Ñ‹Ñ… пакетов Samba 2.2 Ð´Ð»Ñ Debian, log-файлы Ð´Ð»Ñ Ð´ÐµÐ¼Ð¾Ð½Ð¾Ð² Samba (nmbd и smbd) хранÑÑ‚ÑÑ Ñ‚ÐµÐ¿ÐµÑ€ÑŒ в /var/log/samba/. Файлы называютÑÑ log.nmbd и log.smbd Ð´Ð»Ñ nmbd и smbd ÑоответÑтвенно."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr "Старые log-файлы, которые были в /var/log/, будут перемещены в новое Ð´Ð»Ñ Ð²Ð°Ñ Ð¼ÐµÑто."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "ЗапуÑк nmbd из inetd больше не поддерживаетÑÑ"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd. As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr "Ваша ÑиÑтема была ранее наÑтроена на запуÑк nmbd и smbd из inetd. nmbd Ñ Ð²ÐµÑ€Ñии 2.999+3.0.alpha20-4 больше не запуÑкаетÑÑ Ð¸Ð· inetd. ЕÑли вы изменили ваш Ñтартовый Ñкрипт /etc/init.d/samba, вам необходимо откорректировать его вручную, чтобы nmbd запуÑкалÑÑ."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "daemons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Как вы желаете запуÑкать Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr "Samba-демон smbd может запуÑкатьÑÑ ÐºÐ°Ðº обычный демон или из inetd. Рекомендуем выбрать запуÑк в качеÑтве демона."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "ПеремеÑтить /etc/samba/smbpasswd в /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file. Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr "Samba 3.0 приноÑит новый, более полный Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ Ð±Ð°Ð·Ñ‹ данных SAM, который заменÑет Ñобой файл /etc/samba/smbpasswd. Желаете, чтобы ваш ÑущеÑтвующий файл smbpasswd мигрировал в /var/lib/samba/passdb.tdb? ЕÑли вы планируете вмеÑто него иÑпользовать другой Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ pdb (например, LDAP), вы должны ответить здеÑÑŒ 'нет'."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Ваш smb.conf будет перезапиÑан!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr "SWAT перепишет ваш файл smb.conf. Он перегруппирует вÑе запиÑи и удалит вÑе комментарии, опции include= и copy=. ЕÑли у Ð²Ð°Ñ Ñ‚Ñ‰Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð¾ Ñозданный smb.conf, то Ñохраните его в безопаÑном меÑте или не иÑпользуйте SWAT!"
-
diff --git a/packaging/Debian/debian-sarge/po/templates.pot b/packaging/Debian/debian-sarge/po/templates.pot deleted file mode 100644 index 465f4719b0..0000000000 --- a/packaging/Debian/debian-sarge/po/templates.pot +++ /dev/null @@ -1,233 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" -"Language-Team: LANGUAGE <LL@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=CHARSET\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-sarge/po/tr.po b/packaging/Debian/debian-sarge/po/tr.po deleted file mode 100644 index b18f325681..0000000000 --- a/packaging/Debian/debian-sarge/po/tr.po +++ /dev/null @@ -1,283 +0,0 @@ -# Turkish translation of samba. -# This file is distributed under the same license as the samba package. -# Mehmet Türker <mturker@innova.com.tr>, 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2004-06-01 09:42+0300\n" -"Last-Translator: Mehmet Türker <mturker@innova.com.tr>\n" -"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Unix dosya sistemi için karakter seti" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Halihazırda smb.conf yapılandırma dosyanızda \"character set\" ayarı mevcut. " -"Samba 3.0'da bu seçenek yenisiyle: \"unix charset\" ile deÄŸiÅŸtirildi. Lütfen " -"Samba'nın sistemdeki dosya isimlerini çevirirken dikkate aldığı bu yeni " -"seçenekle kullanılmasını istediÄŸiniz karakter setini girin." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Bu seçeneÄŸi boÅŸ bırakırsanız, smb.conf dosyanız deÄŸiÅŸtirilmeyecektir." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "DOS istemcileri için karakter seti" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Halihazırda smb.conf yapılandırma dosyanızda \"client code page\" ayarı mevcut. " -"Samba 3.0'da bu seçenek \"dos charset\" seçeneÄŸiyle deÄŸiÅŸtirildi. Lütfen bu yeni " -"seçenekle beraber kullanmak için bir karakter seti seçin. ÇoÄŸu durumda öntanımlı " -"olarak seçilmiÅŸ bulunan seçenek uygundur. Aklınızda bulunsun bu seçenek Windows " -"istemcilerini desteklemek için gerekli deÄŸildir, sadece DOS istemcileri içindir. " -"EÄŸer bu seçeneÄŸi boÅŸ bırakırsanız smb.conf dosyanız deÄŸiÅŸtirilmeyecektir." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"WINS ayarlarını DHCP'den kullanmak için smb.conf dosyasında deÄŸiÅŸiklik yapılsın mı?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"EÄŸer bilgisayarınız IP adresini ağınızdaki bir DHCP sunucusundan alıyorsa, " -"DHCP sunucusu ayrıca ağınızda bulunan WINS sunucuları (\"NetBIOS alanadı " -"sunucuları\") hakkında da bilgi verebilir. Bu, smb.conf dosyanızda DHCP " -"tarafından sunulan WINS ayarlarının otomatik olarak /etc/samba/dhcp.conf " -"dosyasından okunmasını saÄŸlayan bir deÄŸiÅŸikliÄŸi gerektirir." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Bu özellikten yararlanabilmek için dhcp3-client paketinin kurulmuÅŸ olması gerekir." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "\"smb.conf\" dosyası debconf ile yapılandırılsın mı?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Geri kalan Samba yapılandırması Samba uygulamalarını (nmbd ve smbd) yapılandırmak " -"için kullanılan /etc/samba/smb.conf dosyasındaki parametreleri etkileyen sorularla " -"devam edecektir. Mevcut smb.conf dosyası, debconf'u ÅŸaşırtabilecek ve smb.conf " -"dosyanızı elle deÄŸiÅŸtirilmesi zorunda kılacak bir 'include' satırı veya birden " -"fazla satır boyunca devam eden bir seçenek içeriyor." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"EÄŸer smb.conf'u yapılandırmak için debconf'u kullanmıyorsanız bütün yapılandırma " -"deÄŸiÅŸikliklerini kendiniz elle yapmanız gerekir. Bu durumda periyodik olarak " -"sunulan yapılandırma iyileÅŸtirmelerinden de yararlanamayacaksınız. Bu nedenlerle " -"eÄŸer mümkünse debconf kullanımı tavsiye edilir." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Çalışma Grubu/Etki Alanı Ä°smi?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Bu ayar, sunucunuzun istemciler tarafından sorgulandığında hangi Çalışma Grubu " -"içerisinde gözükeceÄŸini kontrol eder. Aklınızda bulunsun, bu parametre ayrıca " -"security=domain ayarı ile beraber kullanılacak Etki Alanını da kontrol eder." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Parola ÅŸifrelenmesi kullanılsın mı?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Yeni Windows istemcileri SBM sunucularıyla ÅŸifrelenmiÅŸ parolalar kullanarak " -"iletiÅŸim kurarlar. EÄŸer düz metin parolaları kullanmak istiyorsanız Windows " -"registry içinde bir parametreyi deÄŸiÅŸtirmelisiniz. EÄŸer bu iÅŸlemi yapmışsanız, " -"geçerli bir /etc/samba/smbpasswd dosyanız olduÄŸundan ve buraya smbpasswd " -"komutu kullanarak bütün kullanıcılar için parola kaydı eklendiÄŸinden emin olun." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba parola veritabanı /var/lib/samba/passwd.tdb yaratılsın mı?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Windows'un çoÄŸu sürümüyle uyumlu olması için, Samba'nın ÅŸifreli parolaları " -"kullanmak üzere yapılandırılması gerekir. Bu iÅŸlem kullanıcı parolalarının " -"/etc/passwd dosyasından farklı bir yerde saklanmasını gerektirir. Bu dosya " -"otomatik olarak yaratılabilir, fakat parolaların (siz veya kullanıcı tarafından) " -"smbpasswd çalıştırılarak elle girilmesi ve gelecekte de güncel tutulması gerekir. " -"EÄŸer bunu yaratmazsanız, düz metin parolalar kullanabilmek için samba'yı (ve " -"muhtemelen istemci makineleri) yeniden yapılandırmanız gerekir. Daha ayrıntılı " -"bilgi için samba-doc paketinden çıkan /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html'ye baÅŸvurun." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba'nın günce dosyaları taşındı." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Samba 2.2'nin ilk paketlerinden itibaren, Samba artalan süreçlerine (nmbd ve " -"smbd) ait Debian günce dosyaları artık /var/log/samba altında saklanıyor. Bu " -"dosyaların isimleri nmbd ve smbd için sırasıyla log.nmbd ve log.smbd'dir." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"/var/log/ içinde bulunan eski günce dosyaları yeni bir konuma taşınacak." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Nmbd'nin inetd'den çalıştırılması artık desteklenmiyor" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Sisteminiz, nmbd ve smbd'yi inetd üzerinden çalıştıracak ÅŸekilde ayarlanmış. " -"Sürüm 2.999+3.0.alpha20-4'ten sonra artık nmbd inetd'den çalıştırılmıyor. " -"EÄŸer /etc/init.d/samba baÅŸlangıç betiÄŸini kendiniz düzenlediyseniz, nmbd'nin " -"çalışabilmesi için bu dosyayı elle ayarlamak zorunda kalabilirsiniz." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "artalan süreçleri, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Samba'nın nasıl çalışmasını istersiniz?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba artalan süreci smbd, normal bir artalan süreci olarak veya inetd'den " -"çalışabilir. Tavsiye edilen yaklaşım artalan süreci olarak çalıştırmaktır." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd /var/lib/samba/passwd.tdb'ye taşınsın mı?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0, /etc/samba/smbpasswd'nin yerini alan yeni ve daha eksiksiz bir SAM " -"veritabanı arayüzü ile birlikte geliyor. Mevcut smbpasswd dosyasının /var/lib/" -"samba/passdb.tbd dosyasına dönüştürülmesini ister misiniz? EÄŸer baÅŸka bir pdb " -"arkayüzü (ör. LDAP) kullanmayı planlıyorsanız, burada 'hayır' cevabını vermelisiniz." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Smb.conf dosyanız tekrar yazılacak!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT smb.conf dosyanızın üzerine yazacak. Bu iÅŸlem kayıtları tekrar düzenleyecek, " -"bütün yorumları, include= ve copy= seçeneklerini silecek. EÄŸer özel olarak " -"tasarladığınız bir smb.conf dosyanız varsa, bunu yedekleyin veya SWAT kullanmayın!" diff --git a/packaging/Debian/debian-sarge/python2.3-samba.files b/packaging/Debian/debian-sarge/python2.3-samba.files deleted file mode 100644 index 82759d81b8..0000000000 --- a/packaging/Debian/debian-sarge/python2.3-samba.files +++ /dev/null @@ -1 +0,0 @@ -usr/lib/python2.3/site-packages/ diff --git a/packaging/Debian/debian-sarge/rules b/packaging/Debian/debian-sarge/rules deleted file mode 100755 index 5a0f5e60b4..0000000000 --- a/packaging/Debian/debian-sarge/rules +++ /dev/null @@ -1,358 +0,0 @@ -#!/usr/bin/make -f -# -# Important modifications (introduction of a saved config.cache to -# solve build problems) introduced in Samba 2.2.1a-5. These -# modification were made by Steve Langasek <vorlon@netexpress.net>. -# -# config.cache *DISABLED* to solve problems caused incorrect settings -# --SSS -# -# - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -# This is the debhelper compatability version to use. -export DH_COMPAT=4 - -# This has to be exported to make some magic below work. -export DH_OPTIONS - -# Set the host and build architectures for use with config.cache loading, -# cross-building, etc. -DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -DEB_HOST_GNU_SYSTEM := $(shell dpkg-architecture -qDEB_HOST_GNU_SYSTEM) -DEB_BUILD_GNU_SYSTEM := $(shell dpkg-architecture -qDEB_BUILD_GNU_SYSTEM) - -export DEB_HOST_GNU_TYPE -export DEB_BUILD_GNU_TYPE -export DEB_HOST_GNU_SYSTEM -export DEB_BUILD_GNU_SYSTEM - -# Support the DEB_BUILD_OPTIONS variable -CFLAGS = -gstabs -Wall -INSTALL = install - -ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS += -O0 -else - CFLAGS += -O2 -endif - -ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) - INSTALL += -s -endif - - -DESTDIR=`pwd`/debian/tmp - -conf_args = \ - --with-fhs \ - --enable-shared \ - --enable-static \ - --prefix=/usr \ - --sysconfdir=/etc \ - --libdir=/etc/samba \ - --with-privatedir=/etc/samba \ - --with-piddir=/var/run/samba \ - --localstatedir=/var \ - --with-netatalk \ - --with-pam \ - --with-syslog \ - --with-utmp \ - --with-readline \ - --with-pam_smbpass \ - --with-libsmbclient \ - --with-winbind \ - --with-msdfs \ - --with-automount \ - --with-tdbsam \ - --with-ldap \ - --with-shared-modules=idmap_ad,idmap_rid \ - --with-python=python2.3 - -ifeq ($(DEB_HOST_GNU_SYSTEM),linux) - conf_args += \ - --with-smbmount \ - --with-acl-support \ - --with-quotas \ - --with-cifsmount - mount_cifs = yes - smbfs = yes -else - conf_args += --without-quotas - mount_cifs = no - smbfs = no -endif - -ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) - conf_args += --build $(DEB_HOST_GNU_TYPE) -else - conf_args += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) -endif - -patch: patch-stamp -patch-stamp: - dh_testdir - if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi - touch patch-stamp - -unpatch: - dh_testdir - if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi - rm -f patch-stamp - -configure: patch-stamp configure-stamp -configure-stamp: - dh_testdir - -# if [ -f debian/config.cache ]; then \ -# cp -f debian/config.cache source/config.cache; \ -# fi - - [ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure $(conf_args)) - - touch configure-stamp - -build: patch-stamp configure-stamp build-stamp -build-stamp: - dh_testdir - - $(MAKE) -C source headers - $(MAKE) -C source all nsswitch/libnss_wins.so python_ext - - touch build-stamp - -clean: unpatch - dh_testdir - dh_testroot - rm -f build-stamp configure-stamp - - # Clean first the Samba package -# -$(MAKE) -C source realclean -# -$(MAKE) -C source clean - -$(MAKE) -C source python_clean distclean - - # Delete stuff left after a build that is not deleted by 'make clean' - rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \ - source/bin/libsmbclient.a source/bin/mount.cifs \ - source/include/stamp-h - - sed -e "s/@libacl@/`type-handling any linux-gnu`/g" \ - < debian/control.in > debian/control - - dh_clean - -install: DH_OPTIONS= -install: build - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - - mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib/samba \ - $(DESTDIR)/lib/security $(DESTDIR)/sbin \ - $(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \ - $(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \ - $(DESTDIR)/usr/lib/python2.3/site-packages/samba - - # Add here commands to install the package into debian/tmp. - $(MAKE) -C source install DESTDIR=$(DESTDIR) - - # libsmbclient files are not installed by the standard - # 'make install' - do it manually. - $(MAKE) -C source installclientlib DESTDIR=$(DESTDIR) - mv $(DESTDIR)/usr/lib/samba/libsmbclient.so $(DESTDIR)/usr/lib/samba/libsmbclient.so.0.1 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so.0 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so - - # Starting with Samba 3.0.6 libsmbclient.so is installed in - # /usr/lib/samba. We don't want it there since it is not in the - # default library path. Here we move it to /usr/lib/. - mv $(DESTDIR)/usr/lib/samba/libsmbclient* \ - $(DESTDIR)/usr/lib/ - - # Install other stuff not installed by "make install" - install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd - - # Install winbind stuff not installed by 'make install' - install -m 0644 source/bin/pam_winbind.so $(DESTDIR)/lib/security/ - install -m 0644 source/nsswitch/libnss_winbind.so $(DESTDIR)/lib/libnss_winbind.so.2 - - # Install libnss_wins.so, which is not installed by 'make install' either. - install -m 0644 source/nsswitch/libnss_wins.so $(DESTDIR)/lib/libnss_wins.so.2 - - # pam_smbpass.so isn't being installed by 'make install'. - # We'll move it here to $(DESTDIR)/lib/security/ and then - # libpam-smbpass.files will make dh_movefiles move it to the - # right location in the libpam-smbpass package. - install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/ - -ifeq ($(smbfs),yes) - # Create the symlinks that will allow us to do "mount -t smbfs ..." - # and "mount -t smb ...". Note that the source/script/installbin.sh - # tries to create the first symlink, but we have commented - # that code out and do everything here. We also create - # symlinks for the man pages. - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8 - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8 -endif - -ifeq ($(mount_cifs),yes) - # Install mount.cifs and its man page - install -m 04755 source/bin/mount.cifs $(DESTDIR)/sbin/ - install -m 0644 docs/manpages/mount.cifs.8 $(DESTDIR)/usr/share/man/man8/ -endif - - # For CUPS to support printing to samba printers, it's necessary - # to make the following symlink (according to - # Erich Schubert <debian@vitavonni.de> in #109509): - ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb - - # Install man pages for files without man pages in the upstream sources - install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8 - - # We don't provide the "Using Samba" book in the swat package. - # It's provided in the samba-doc package so in the swat package - # we just provide a symlink to the real book. - ln -s ../../doc/samba-doc/htmldocs/using_samba \ - $(DESTDIR)/usr/share/samba/swat/using_samba - - # Delete unwanted stuff leftover from "make install" - - # The smbwrapper package is not being generated anymore, so we must - # delete the related man pages. - # rm $(DESTDIR)/usr/share/man/man1/smbsh.1 - - # We're not providing findsmb (should we?) so let's remove the man - # pages. - find debian/ -name 'findsmb*' -exec rm -f {} \; - - # Install samba-common's conffiles - they'll get moved later to their - # correct place by dh_movefiles. - cp debian/smb.conf $(DESTDIR)/usr/share/samba/ - install -m755 debian/panic-action $(DESTDIR)/usr/share/samba/ - cp debian/gdbcommands $(DESTDIR)/etc/samba/ - cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba - install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba - - # Install the Python modules - # - # Hmmm... need to figure this out. We have lib.linux-i686-2.2 - # and lib.linux-i686-2.3 directories. Using only the stuff from - # the 2.3 directory for now. peloy.- - #cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/ - cp source/build/lib.*-*-2.3/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ - cp source/python/samba/* $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ - - dh_movefiles - -# Build architecture-independent files here. -# Pass -i to all debhelper commands in this target to reduce clutter. -binary-indep: DH_OPTIONS=-i -binary-indep: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/* -# dh_installmenu -# dh_installemacsen -# dh_installpam -# dh_installinit -# dh_installcron -# dh_installmanpages -# dh_installinfo -# dh_undocumented - dh_installchangelogs - dh_link - dh_compress - dh_fixperms - - # Get rid of those pesky .cvsignore files to make lintian happy - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_perl - dh_gencontrol - dh_md5sums - dh_builddeb - -# Build architecture-dependent files here. -# Pass -a to all debhelper commands in this target to reduce clutter. -ifeq ($(smbfs),no) - DH_EXTRAS=-Nsmbfs -endif - -binary-arch: DH_OPTIONS=-a $(DH_EXTRAS) -binary-arch: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.3-samba source/python/examples/* -# dh_installmenu - # dh_installlogrotate is not available in Debian Potato... - if [ -x /usr/bin/dh_installlogrotate ]; then \ - dh_installlogrotate; \ - else \ - mkdir -p debian/samba/etc/logrotate.d; \ - cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \ - mkdir -p debian/winbind/etc/logrotate.d; \ - cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \ - fi -# dh_installemacsen -# dh_installpam - DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19" - DH_OPTIONS= dh_installinit -pwinbind - dh_installcron -# dh_installmanpages -# dh_installinfo - cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind -# dh_undocumented - dh_installchangelogs -Nlibpam-smbpass - DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG - dh_strip --dbg-package=samba --dbg-package=smbclient - cp -a debian/smbclient-dbg/* debian/samba-dbg - rm -rf debian/smbclient-dbg - dh_link - dh_compress - dh_fixperms - - # Why this is executable, I have NO idea... - chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h - -ifeq ($(smbfs),yes) - # You may want to make some executables suid here. - # The smbmnt and smbumount binaries should be setuid-root. This - # has security implications because these programs haven't had - # a thorough security audit. smbmount _does not_ have to have - # the setuid bit set. In fact, it is a security hole. - chmod u+s debian/smbfs/usr/bin/smbmnt - chmod u+s debian/smbfs/usr/bin/smbumount -endif - - # Set some reasonable default perms for the samba logdir. - chmod 0750 debian/samba/var/log/samba/ - chown root.adm debian/samba/var/log/samba/ - - # Get rid of those pesky .cvsignore files to make lintian happy - # (maybe we only need the "find ... -exec rm -f {} ;" we have - # in the binary-indep target?) peloy.- - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_makeshlibs -# dh_perl - dh_shlibdeps - dh_gencontrol - dh_md5sums - dh_builddeb - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install configure diff --git a/packaging/Debian/debian-sarge/samba-common.config b/packaging/Debian/debian-sarge/samba-common.config deleted file mode 100644 index 766f0ddb7e..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.config +++ /dev/null @@ -1,154 +0,0 @@ -#/bin/sh -e - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -n 1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# We ask the question IFF the config contains complex options that could -# cause us to break the config. -if [ -f "$FILE" ] && grep -v dhcp.conf $FILE \ - | grep -qEi '\\$|^[[:space:]]*include[[:space:]]*=' -then - db_input high samba-common/do_debconf || true - db_go -else - db_set samba-common/do_debconf true -fi - -# If user doesn't want to use debconf to configure Samba the leave... -db_get samba-common/do_debconf || true -if [ "${RET}" = "false" ]; then - exit 0 -fi - -# User wants to use debconf, let's continue... - -# Adjust priority of the question about the workgroup name depending -# on whether a workgroup name has already being specified. -db_get samba-common/workgroup || true -if [ "${RET}" ]; then - WGPRIORITY=medium -else - WGPRIORITY=high -fi - -# Preload any values from the existing smb.conf file -if [ -f $FILE ]; then - WORKGROUP=`smbconf_retr workgroup` - if [ "$WORKGROUP" ]; then - db_set samba-common/workgroup "$WORKGROUP" - fi - - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - elif [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - - db_set samba-common/encrypt_passwords "$ENCRYPT" - fi - - CHARSET=`smbconf_retr "character set"` - CODEPAGE=`smbconf_retr "client code page"` - UNIXCHARSET=`smbconf_retr "unix charset"` - DOSCHARSET=`smbconf_retr "dos charset"` - - # If we're upgrading from an old version and there's no - # 'passdb backend' setting, add one. - if [ "$1" = "configure" -a -n "$2" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 \ - && ! grep -q -i '^[[:space:]]*passdb backend[[:space:]]*=' $FILE - then - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e' - s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)encrypt passwords/\1encrypt passwords/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*encrypt passwords[[:space:]]*=/a \ - passdb backend = smbpasswd guest - }' < $FILE > ${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi -fi - -# Get workgroup name -db_input $WGPRIORITY samba-common/workgroup || true -db_go - -# Use encrypted passwords? -db_input medium samba-common/encrypt_passwords || true -db_go - -# Handle migrating character sets -if [ -n "$CHARSET" -a -z "$UNIXCHARSET" ] -then - UNIXCHARSET=`echo $CHARSET | sed -e's/iso-/ISO/i'` - db_set samba-common/character_set "$UNIXCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/character_set || true - db_go -fi - -if [ -n "$CODEPAGE" -a -z "$DOSCHARSET" ] -then - DOSCHARSET=CP`echo $CODEPAGE | sed -e's/[[:alpha:]]*//g'` - db_set samba-common/codepage "$DOSCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/codepage || true - db_go -fi - -DHCPPRIORITY=medium -#if [ "$DEBCONF_RECONFIGURE" = 1 ] && [ -f /sbin/dhclient3 ] -if [ -f /sbin/dhclient3 ] -then - DHCPPRIORITY=high -# TODO: see if we can detect that dhcp3-client is *going* to be installed, -# even if it isn't yet. -#elif dpkg-query -W --showformat='${Status}\n' dhcp3-client | grep ??? -# unknown ok not-installed ? -# DHCPPRIORITY=high -fi - -if [ ! -f $FILE ] || grep -q -i 'wins server' $FILE -then - # check the values before and after; unset the 'applied' flag - # if they don't match. - db_get samba-common/dhcp || true - OLDDHCP="$RET" - db_input $DHCPPRIORITY samba-common/dhcp || true - db_go - db_get samba-common/dhcp || true - if [ "$OLDDHCP" != "$RET" ]; then - db_fset samba-common/dhcp applied false - fi -fi diff --git a/packaging/Debian/debian-sarge/samba-common.dhcp b/packaging/Debian/debian-sarge/samba-common.dhcp deleted file mode 100644 index 3b5a05ff57..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.dhcp +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh - -SAMBA_DHCP_CONF=/etc/samba/dhcp.conf - -netbios_setup() { - # No need to continue if we're called with an unsupported option - - if [ "$reason" != BOUND ] && [ "$reason" != RENEW ] \ - && [ "$reason" != REBIND ] && [ "$reason" != REBOOT ] \ - && [ "$reason" != EXPIRE ] && [ "$reason" != FAIL ] - then - return - fi - - # Nor should we continue if no settings have changed - if [ "$new_netbios_name_servers" = "$old_netbios_name_servers" ] \ - && [ "$new_netbios_scope" = "$old_netbios_scope" ] - then - return - fi - - # reparse our own file - local other_servers=`sed -n -e"s/[[:space:]]$interface:[^[:space:]]*//g; \ - s/^[[:space:]]*wins server[[:space:]]*=[[:space:]]*//pi" \ - $SAMBA_DHCP_CONF` - - umask 022 - - local serverlist="$other_servers" - for server in $new_netbios_name_servers - do - serverlist="$serverlist $interface:$server" - done - - echo -n > $SAMBA_DHCP_CONF - - # If we're updating on failure/expire, AND there are no WINS - # servers for other interfaces, leave the file empty. - if [ -z "$other_servers" ] - then - if [ "$reason" = FAIL ] || [ "$reason" = EXPIRE ] - then - return - fi - fi - - if [ -n "$serverlist" ] - then - echo " wins server =$serverlist" >> $SAMBA_DHCP_CONF - fi - if [ -n "$new_netbios_scope" ] - then - echo " netbios scope = $new_netbios_scope" >> $SAMBA_DHCP_CONF - fi -} - -netbios_setup diff --git a/packaging/Debian/debian-sarge/samba-common.dirs b/packaging/Debian/debian-sarge/samba-common.dirs deleted file mode 100644 index c089ad7357..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.dirs +++ /dev/null @@ -1,2 +0,0 @@ -etc/samba -etc/dhcp3/dhclient-enter-hooks.d diff --git a/packaging/Debian/debian-sarge/samba-common.files b/packaging/Debian/debian-sarge/samba-common.files deleted file mode 100644 index 3cc7ed9861..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.files +++ /dev/null @@ -1,21 +0,0 @@ -etc/samba/ -etc/dhcp3/ -etc/pam.d/ -usr/bin/net -usr/bin/nmblookup -usr/bin/smbpasswd -usr/bin/testparm -usr/bin/profiles -usr/share/man/man1/nmblookup.1 -usr/share/man/man1/testparm.1 -usr/share/man/man1/profiles.1 -usr/share/man/man5/lmhosts.5 -usr/share/man/man5/smb.conf.5 -usr/share/man/man7/samba.7 -usr/share/man/man8/net.8 -usr/share/man/man8/smbpasswd.8 -usr/share/samba/lowcase.dat -usr/share/samba/panic-action -usr/share/samba/smb.conf -usr/share/samba/upcase.dat -usr/share/samba/valid.dat diff --git a/packaging/Debian/debian-sarge/samba-common.postinst b/packaging/Debian/debian-sarge/samba-common.postinst deleted file mode 100644 index 6c6eb9bf53..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.postinst +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# -# - -set -e - -# Do debconf stuff here -. /usr/share/debconf/confmodule - -# We need a default smb.conf file. If one doesn't exist we put in place -# one that has some basic defaults. -if [ ! -e /etc/samba/smb.conf ]; then - cp -a /usr/share/samba/smb.conf /etc/samba/ -fi - -# Static tempfile location, dpkg-style -TMPFILE=/etc/samba/smb.conf.dpkg-tmp - -# ------------------------- Debconf questions start --------------------- - -# Is the user configuring with debconf, or he/she prefers swat/manual -# config? -db_get samba-common/do_debconf || true -if [ "${RET}" = "true" ]; then - # Get workgroup name - db_get samba-common/workgroup || true - WORKGROUP="${RET}" - - # Oh my GOD, this is ugly. Why would anyone put these - # characters in a workgroup name? Why, Lord, why??? - WORKGROUP=`echo $WORKGROUP | \ - sed -e's/\\\\/\\\\\\\\/g - s#/#\\\\/#g - s/&/\\\&/g - s/\\\$/\\\\\\\$/g'` - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)workgroup[[:space:]]*=.*/\1workgroup = ${WORKGROUP}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Encrypt passwords? - db_get samba-common/encrypt_passwords || true - ENCRYPT_PASSWORDS="${RET}" - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)encrypt passwords[[:space:]]*=.*/\1encrypt passwords = ${ENCRYPT_PASSWORDS}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Install DHCP support - db_get samba-common/dhcp && DHCPVAL="$RET" - db_fget samba-common/dhcp applied || true - if [ "$DHCPVAL" = true ] && [ "$RET" != true ] && \ - ! grep -q dhcp.conf /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /wins server[[:space:]]*=/a \\ -\\ -# If we receive WINS server info from DHCP, override the options above. \\ - include = /etc/samba/dhcp.conf -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - elif [ "$RET" != true ] && grep -q dhcp.conf /etc/samba/smb.conf - then - : - # FIXME: here we /delete/ the lines? - fi - # Once we get here, the config has been applied, whatever - # it is. - if [ "$RET" != true ]; then - db_fset samba-common/dhcp applied true - fi - - # Update charset settings? - if ! grep -q "^[[:space:]]*unix charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/character_set || true - UNIXCHARSET="${RET}" - if [ -n "$UNIXCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)character set/\1character set/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*character set[[:space:]]*=/c \\ - unix charset = $UNIXCHARSET - }" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if grep -qi "^[[:space:]]*passdb backend[[:space:]]*=.*unixsam" /etc/samba/smb.conf - then - sed -e 's/^\([[:space:]]*\)passdb backend/\1passdb backend/i - /^[[:space:]]*passdb backend/ { - s/unixsam/guest/i - }' < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - - if ! grep -q "^[[:space:]]*dos charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/codepage || true - DOSCHARSET="${RET}" - if [ -n "$DOSCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)client code page/\1client code page/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*client code page[[:space:]]*=/c \\ - dos charset = $DOSCHARSET -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4 \ - && ! grep -q "^[[:space:]]*panic action[[:space:]]*=" /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/a \\ -\\ -# Do something sensible when Samba crashes: mail the admin a backtrace\\ - panic action = /usr/share/samba/panic-action %d" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - -fi - -chmod a+r /etc/samba/smb.conf - -# ------------------------- Debconf questions end --------------------- - -db_stop - -#DEBHELPER# diff --git a/packaging/Debian/debian-sarge/samba-common.postrm b/packaging/Debian/debian-sarge/samba-common.postrm deleted file mode 100644 index 8a4b6d3d55..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.postrm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -# -# - -if [ "$1" = purge ]; then - # Remove any files left in /etc/samba/ - rm -Rf /etc/samba/ -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-sarge/samba-common.templates b/packaging/Debian/debian-sarge/samba-common.templates deleted file mode 100644 index e5f7b1ae0c..0000000000 --- a/packaging/Debian/debian-sarge/samba-common.templates +++ /dev/null @@ -1,66 +0,0 @@ -Template: samba-common/character_set -Type: string -_Description: Character Set for Unix filesystem - You currently have a "character set" configured in your smb.conf. In - Samba 3.0, this option is replaced by a new option, "unix charset". - Please specify the character set you wish to use for theis new option, - which controls how Samba interprets filenames on the file system. - . - If you leave this option blank, your smb.conf will not be changed. - -Template: samba-common/codepage -Type: string -_Description: Character Set for DOS clients - You currently have a "client code page" set in your smb.conf. In Samba - 3.0, this option is replaced by the option "dos charset". Please specify - the character set you wish to use for this new option. In most cases, the - default chosen for you will be sufficient. Note that this option is not - needed to support Windows clients, it is only for DOS clients. If you - leave this option blank, your smb.conf will not be changed. - -Template: samba-common/dhcp -Type: boolean -Default: false -_Description: Modify smb.conf to use WINS settings from DHCP? - If your computer gets IP address information from a DHCP server on the - network, the DHCP server may also provide information about WINS servers - ("NetBIOS name servers") present on the network. This requires a - change to your smb.conf file so that DHCP-provided WINS settings will - automatically be read from /etc/samba/dhcp.conf. - . - You must have the dhcp3-client package installed to take advantage of this - feature. - -Template: samba-common/do_debconf -Type: boolean -Default: true -_Description: Configure smb.conf through debconf? - The rest of the configuration of Samba deals with questions that affect - parameters in /etc/samba/smb.conf, which is the file used to configure the - Samba programs (nmbd and smbd.) Your current smb.conf contains an - 'include' line or an option that spans multiple lines, which could confuse - debconf and require you to edit your smb.conf by hand to get it working - again. - . - If you don't use debconf to configure smb.conf, you will have to handle - any configuration changes yourself, and will not be able to take - advantage of periodic configuration enhancements. Therefore, use of - debconf is recommended if possible. - -Template: samba-common/workgroup -Type: string -_Description: Workgroup/Domain Name? - This controls what workgroup your server will appear to be in when queried - by clients. Note that this parameter also controls the Domain name used - with the security=domain setting. - -Template: samba-common/encrypt_passwords -Type: boolean -Default: true -_Description: Use password encryption? - Recent Windows clients communicate with SMB servers using encrypted - passwords. If you want to use clear text passwords you will need to change - a parameter in your Windows registry. It is recommended that you use - encrypted passwords. If you do, make sure you have a valid - /etc/samba/smbpasswd file and that you set passwords in there for each - user using the smbpasswd command. diff --git a/packaging/Debian/debian-sarge/samba-doc.docs b/packaging/Debian/debian-sarge/samba-doc.docs deleted file mode 100644 index d9f0aa1d0a..0000000000 --- a/packaging/Debian/debian-sarge/samba-doc.docs +++ /dev/null @@ -1,8 +0,0 @@ -docs/Samba3-HOWTO.pdf -docs/Samba3-ByExample.pdf -docs/Samba3-Developers-Guide.pdf -docs/REVISION -docs/THANKS -docs/history -docs/htmldocs/ -docs/registry/ diff --git a/packaging/Debian/debian-sarge/samba-doc.examples b/packaging/Debian/debian-sarge/samba-doc.examples deleted file mode 100644 index e71180364c..0000000000 --- a/packaging/Debian/debian-sarge/samba-doc.examples +++ /dev/null @@ -1,2 +0,0 @@ -debian/wins2dns.awk -source/smbadduser diff --git a/packaging/Debian/debian-sarge/samba.config b/packaging/Debian/debian-sarge/samba.config deleted file mode 100644 index 300b19a2e8..0000000000 --- a/packaging/Debian/debian-sarge/samba.config +++ /dev/null @@ -1,92 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -n 1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# Babysit users who don't read README.Debian -if [ -n "$2" ] && dpkg --compare-versions "$2" lt "2.2" -then - db_input medium samba/log_files_moved || true - db_go -fi - -db_input medium samba/run_mode || true -db_go - - -# Offer to move the password database for existing users -if [ "$1" = "configure" -a -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - FILE=/etc/samba/smb.conf - PASSDB="" - if [ -f "$FILE" ]; then - PASSDB=`smbconf_retr "passdb backend"` - fi - TDBPRIORITY=medium - if echo "$PASSDB" | grep -q ldapsam; then - TDBPRIORITY=low - fi - db_get samba-common/do_debconf || true - if [ "${RET}" = "false" ]; then - TDBPRIORITY=low - fi - - db_input "$TDBPRIORITY" samba/tdbsam || true -fi - -# We vary the priority of the next question depending on whether -# the password database already exists... -if [ -e /etc/samba/smbpasswd -o -e /var/lib/samba/passdb.tdb ]; then - PRIORITY="low" -else - # If 'encrypt passwords' is true in smb.conf, and smbpasswd - # does not exist, default to yes here. - FILE=/etc/samba/smb.conf - if [ -f "$FILE" ]; then - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - fi - if [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - fi - db_set samba/generate_smbpasswd "$ENCRYPT" - fi - PRIORITY="medium" -fi - -db_input $PRIORITY samba/generate_smbpasswd || true -db_go diff --git a/packaging/Debian/debian-sarge/samba.cron.daily b/packaging/Debian/debian-sarge/samba.cron.daily deleted file mode 100644 index 42fc98d8f6..0000000000 --- a/packaging/Debian/debian-sarge/samba.cron.daily +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh -# -# cron script to save a backup copy of /etc/samba/smbpasswd in /var/backups. -# -# Written by Eloy A. Paris <peloy@debian.org> for the Debian project. -# - -BAK=/var/backups - -umask 022 -if cd $BAK; then - # Make sure /etc/samba/smbpasswd exists - if [ -f /etc/samba/smbpasswd ]; then - cmp -s smbpasswd.bak /etc/samba/smbpasswd || cp -p /etc/samba/smbpasswd smbpasswd.bak - fi -fi diff --git a/packaging/Debian/debian-sarge/samba.dirs b/packaging/Debian/debian-sarge/samba.dirs deleted file mode 100644 index a58e4e9892..0000000000 --- a/packaging/Debian/debian-sarge/samba.dirs +++ /dev/null @@ -1,7 +0,0 @@ -usr/bin -usr/sbin -var/log/samba -var/lib/samba/printers/W32X86 -var/lib/samba/printers/WIN40 -var/run/samba -var/cache/samba diff --git a/packaging/Debian/debian-sarge/samba.docs b/packaging/Debian/debian-sarge/samba.docs deleted file mode 100644 index 7949c615b0..0000000000 --- a/packaging/Debian/debian-sarge/samba.docs +++ /dev/null @@ -1,4 +0,0 @@ -README -Roadmap -WHATSNEW.txt -docs/htmldocs/Samba3-HOWTO/diagnosis.html diff --git a/packaging/Debian/debian-sarge/samba.files b/packaging/Debian/debian-sarge/samba.files deleted file mode 100644 index 874a8d66f3..0000000000 --- a/packaging/Debian/debian-sarge/samba.files +++ /dev/null @@ -1,18 +0,0 @@ -usr/bin/smbstatus -usr/bin/smbcontrol -usr/bin/tdbbackup -usr/bin/pdbedit -usr/sbin/smbd -usr/sbin/nmbd -usr/sbin/mksmbpasswd -usr/lib/samba/vfs -usr/lib/samba/idmap -usr/share/man/man1/smbcontrol.1 -usr/share/man/man1/smbstatus.1 -usr/share/man/man5/smbpasswd.5 -usr/share/man/man8/nmbd.8 -usr/share/man/man8/pdbedit.8 -usr/share/man/man8/smbd.8 -usr/share/man/man8/mksmbpasswd.8 -usr/share/man/man8/tdbbackup.8 - diff --git a/packaging/Debian/debian-sarge/samba.init b/packaging/Debian/debian-sarge/samba.init deleted file mode 100644 index 5d0f4671a0..0000000000 --- a/packaging/Debian/debian-sarge/samba.init +++ /dev/null @@ -1,83 +0,0 @@ -#!/bin/sh -# -# Start/stops the Samba daemons (nmbd and smbd). -# -# - -# Defaults -RUN_MODE="daemons" - -# Reads config file (will override defaults above) -[ -r /etc/default/samba ] && . /etc/default/samba - -NMBDPID=/var/run/samba/nmbd.pid -SMBDPID=/var/run/samba/smbd.pid - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemons are there -test -x /usr/sbin/nmbd -a -x /usr/sbin/smbd || exit 0 - -case "$1" in - start) - echo -n "Starting Samba daemons:" - - echo -n " nmbd" - start-stop-daemon --start --quiet --exec /usr/sbin/nmbd -- -D - - if [ "$RUN_MODE" != "inetd" ]; then - echo -n " smbd" - start-stop-daemon --start --quiet --exec /usr/sbin/smbd -- -D - fi - - echo "." - ;; - stop) - echo -n "Stopping Samba daemons: " - - start-stop-daemon --stop --quiet --pidfile $NMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $NMBDPID ] && ! ps h `cat $NMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by nmbd itself IMHO.) - rm -f $NMBDPID - fi - echo -n "nmbd" - - if [ "$RUN_MODE" != "inetd" ]; then - start-stop-daemon --stop --quiet --pidfile $SMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by smbd itself IMHO.) - rm -f $SMBDPID - fi - echo -n " smbd" - fi - - echo "." - - ;; - reload) - echo -n "Reloading /etc/samba/smb.conf (smbd only)" - start-stop-daemon --stop --signal HUP --pidfile $SMBDPID - - echo "." - ;; - restart|force-reload) - $0 stop - sleep 1 - $0 start - ;; - *) - echo "Usage: /etc/init.d/samba {start|stop|reload|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 diff --git a/packaging/Debian/debian-sarge/samba.logrotate b/packaging/Debian/debian-sarge/samba.logrotate deleted file mode 100644 index 57f4228a7c..0000000000 --- a/packaging/Debian/debian-sarge/samba.logrotate +++ /dev/null @@ -1,21 +0,0 @@ -/var/log/samba/log.smbd { - weekly - missingok - rotate 7 - postrotate - invoke-rc.d --quiet samba reload > /dev/null - endscript - compress - notifempty -} - -/var/log/samba/log.nmbd { - weekly - missingok - rotate 7 - postrotate - [ ! -f /var/run/samba/nmbd.pid ] || kill -HUP `cat /var/run/samba/nmbd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-sarge/samba.pamd b/packaging/Debian/debian-sarge/samba.pamd deleted file mode 100644 index e2c7a99356..0000000000 --- a/packaging/Debian/debian-sarge/samba.pamd +++ /dev/null @@ -1,3 +0,0 @@ -@include common-auth -@include common-account -@include common-session diff --git a/packaging/Debian/debian-sarge/samba.postinst b/packaging/Debian/debian-sarge/samba.postinst deleted file mode 100644 index 0fb03f8768..0000000000 --- a/packaging/Debian/debian-sarge/samba.postinst +++ /dev/null @@ -1,230 +0,0 @@ -#!/bin/sh -e -# -# Post-installation script for the Samba package for Debian GNU/Linux -# -# - -case "$1" in - configure) - # continue below - ;; - - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - - *) - echo "postinst called with unknown argument \`$1'" >&2 - exit 0 - ;; -esac - -# Handle debconf -. /usr/share/debconf/confmodule - -INITCONFFILE=/etc/default/samba - -# We generate several files during the postinst, and we don't want -# them to be readable only by root. -umask 022 - - -# Generate configuration file if it does not exist, using default values. -[ -r "${INITCONFFILE}" ] || { - echo Generating ${INITCONFFILE}... >&2 - cat >${INITCONFFILE} <<'EOFMAGICNUMBER1234' -# Defaults for samba initscript -# sourced by /etc/init.d/samba -# installed at /etc/default/samba by the maintainer scripts -# - -# -# This is a POSIX shell fragment -# - -# How should Samba (smbd) run? Possible values are "daemons" -# or "inetd". -RUN_MODE="" -EOFMAGICNUMBER1234 -} - -# --- Begin of FHS migration code --- - -# Starting with Samba 2.2.3-4 the WINS database, the browse -# database and other important run-time files are stored in -# FHS-compliant directories. The following code takes care of -# moving the files in the old directories (/var/samba/ and -# /var/state/samba) to the new FHS-compliant directories. - -if [ -d /var/samba/ ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.0.7-4 -then - mv /var/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/samba/ -fi - -# Default for anything we don't know about (see next two 'for' loops) -# is /var/lib/samba -- guaranteed not to accidentally tromp on any -# files the admin thought were safe. -if [ -d /var/state/samba ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.2.3-4 -then - mv /var/state/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/state/samba/ - - # It's not FHS, and it's probably our fault this is here, - # so delete it if we can. - rmdir /var/state/ 2> /dev/null || true -fi - -# All these files are now placed in their respective FHS-compliant -# directories. Separate out the individual files accordingly. -for F in browse.dat printing.tdb winbindd_cache.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/cache/samba/ - fi -done - -for F in brlock.tdb connections.tdb locking.tdb messages.tdb nmbd.pid \ - sessionid.tdb smbd.pid unexpected.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/run/samba/ - fi -done - -# Beginning with Samba 2.2.5-1, we also move the domain secrets file -# to a more suitable location, since no one really edits this by hand. -if [ -e /etc/samba/secrets.tdb -a ! -e /var/lib/samba/secrets.tdb ] -then - mv /etc/samba/secrets.tdb /var/lib/samba/ -fi - -# If upgrading from a previous 2.999 snapshot, move the passdb.tdb -# database into /var/lib. - -if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.999+3.0.alpha23-5 \ - && [ -e /etc/samba/passdb.tdb -a ! -e /var/lib/samba/passdb.tdb ] -then - mv /etc/samba/passdb.tdb /var/lib/samba/ -fi - -# --- End of FHS migration code --- - -# If upgrading from a previous 2.999 snapshot, clear the broken -# registry.tdb file. -if [ -n "$2" ] && dpkg --compare-versions "$2" gt 2.99.cvs.20020713-1 \ - && dpkg --compare-versions "$2" lt 2.999+3.0cvs20020805-1 -then - rm -f /var/lib/samba/registry.tdb -fi - -# ------------------------- Debconf questions start --------------------- - -# Run Samba as daemons or from inetd? -db_get samba/run_mode || true -RUN_MODE="${RET}" - -TMPFILE=/etc/default/samba.dpkg-tmp -sed -e "s/^[[:space:]]*RUN_MODE[[:space:]]*=.*/RUN_MODE=\"${RUN_MODE}\"/" \ - < ${INITCONFFILE} >${TMPFILE} -chmod a+r ${TMPFILE} -mv -f ${TMPFILE} ${INITCONFFILE} - -# Generate a smbpasswd file? -db_get samba/generate_smbpasswd || true -GENERATE_SMBPASSWD="${RET}" - -db_get samba/tdbsam || true -PDB_MIGRATE="${RET}" - -# Done with debconf now. -db_stop - -umask 066 - -# FIXME: disable if ldapsam support is enabled? -# FIXME: we don't want to pass these through the smbpasswd backend, -# some of the faking can cause us problems! -if [ "${GENERATE_SMBPASSWD}" = "true" -a ! -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]; then - getent passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd -fi - -umask 022 - -if [ -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb -a "$PDB_MIGRATE" = "true" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - umask 066 - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd - umask 022 - - # The database has been moved, now make sure we can still find it. - PASSDB=`sed -n -e"s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ \ - s/^[[:space:]]*passdb backend[[:space:]]*=[[:space:]]*//pi" \ - < /etc/samba/smb.conf \ - | tail -n 1` - if echo "$PASSDB" | egrep -q "(^|[[:space:]])smbpasswd"; then - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB=`echo $PASSDB | sed -e's/\(^\|[[:space:]]\)smbpasswd/\1tdbsam/'` - fi - fi - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB="tdbsam $PASSDB" - fi - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)passdb backend[[:space:]]*=.*/\1passdb backend = ${PASSDB}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf -fi - -# ------------------------- Debconf questions end --------------------- - -# Handle removal of nmbd from inetd.conf, which is no longer a supported -# configuration. -if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4; then - update-inetd --remove netbios-ns -fi - -# We want to add these entries to inetd.conf commented out. Otherwise -# UDP traffic could make inetd to start nmbd or smbd right during -# the configuration stage. -if [ -z "$2" ]; then - update-inetd --add "#<off># netbios-ssn stream tcp nowait root /usr/sbin/tcpd /usr/sbin/smbd" -fi - -if [ "$RUN_MODE" = "daemons" ]; then - update-inetd --disable netbios-ssn -else - update-inetd --enable netbios-ssn -fi - -# This check is a safety net: the /etc/samba/smbpasswd file must have -# permissions 600. -if [ -f /etc/samba/smbpasswd ]; then - chmod 600 /etc/samba/smbpasswd -fi - -# Do the same check for /var/backup/smbpasswd.bak, just in case. -if [ -f /var/backups/smbpasswd.bak ]; then - chmod 600 /var/backups/smbpasswd.bak -fi - -# Delete old /etc/samba/debian_config file, which is not used anymore -# now that we are using debconf. -rm -f /etc/samba/debian_config - -# Move old log files to the new location of Samba's log files -mv -f /var/log/nmb* /var/log/samba/ 2> /dev/null || true -mv -f /var/log/smb* /var/log/samba/ 2> /dev/null || true - -#DEBHELPER# - -exit 0 diff --git a/packaging/Debian/debian-sarge/samba.postrm b/packaging/Debian/debian-sarge/samba.postrm deleted file mode 100644 index b79fe1d009..0000000000 --- a/packaging/Debian/debian-sarge/samba.postrm +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh -e -# -# - -if [ "$1" = purge ]; then - - # Remove Samba's state files, both volatile and non-volatile - rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba - - # Remove log files - rm -Rf /var/log/samba/ - - # Remove init.d configuration file - echo Removing configuration file /etc/default/samba... >&2 - rm -f /etc/default/samba - - # Remove NetBIOS entries from /etc/inetd.conf - update-inetd --remove netbios-ssn - -else - # Not purging, do not remove NetBIOS entries from /etc/inetd.conf - update-inetd --disable netbios-ssn - -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-sarge/samba.prerm b/packaging/Debian/debian-sarge/samba.prerm deleted file mode 100644 index ab62c706d8..0000000000 --- a/packaging/Debian/debian-sarge/samba.prerm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -e - -if [ "$1" = upgrade -a -n "$2" ] && dpkg --compare-versions "$2" lt 2.99 \ - && [ -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ] -then - pdbedit -i tdbsam -e smbpasswd - rm -f /var/lib/samba/passdb.tdb -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-sarge/samba.templates b/packaging/Debian/debian-sarge/samba.templates deleted file mode 100644 index ce503aea5c..0000000000 --- a/packaging/Debian/debian-sarge/samba.templates +++ /dev/null @@ -1,50 +0,0 @@ -Template: samba/generate_smbpasswd -Type: boolean -Default: false -_Description: Create samba password database, /var/lib/samba/passdb.tdb? - To be compatible with the defaults in most versions of Windows, Samba must - be configured to use encrypted passwords. This requires user passwords to - be stored in a file separate from /etc/passwd. This file can be created - automatically, but the passwords must be added manually (by you or the - user) by running smbpasswd, and you must arrange to keep it up-to-date in - the future. If you do not create it, you will have to reconfigure samba - (and probably your client machines) to use plaintext passwords. See - /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc - package for more details. - -Template: samba/log_files_moved -Type: note -_Description: Samba's log files have moved. - Starting with the first packages of Samba 2.2 for Debian the log files for - both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The - names of the files are log.nmbd and log.smbd, for nmbd and smbd - respectively. - . - The old log files that were in /var/log/ will be moved to the new location - for you. - -Template: samba/nmbd_from_inetd -Type: note -_Description: Running nmbd from inetd is no longer supported - Your system was previously configured to start nmbd and smbd from inetd. - As of version 2.999+3.0.alpha20-4, nmbd will no longer be started from - inetd. If you have modified your /etc/init.d/samba startup script, you - may need to adjust it by hand now so that nmbd will start. - -Template: samba/run_mode -Type: select -_Choices: daemons, inetd -Default: daemons -_Description: How do you want to run Samba? - The Samba daemon smbd can run as a normal daemon or from inetd. Running as - a daemon is the recommended approach. - -Template: samba/tdbsam -Type: boolean -Default: false -_Description: Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb? - Samba 3.0 introduces a newer, more complete SAM database interface which - supersedes the /etc/samba/smbpasswd file. Would you like your existing - smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you - plan to use another pdb backend (e.g., LDAP) instead, you should answer - 'no' here. diff --git a/packaging/Debian/debian-sarge/scripts/patch-source b/packaging/Debian/debian-sarge/scripts/patch-source deleted file mode 100644 index a8559b4167..0000000000 --- a/packaging/Debian/debian-sarge/scripts/patch-source +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -e -# -# - -for patch in debian/patches/*.patch; do - echo '->'`basename $patch`: - patch -p1 --ignore-whitespace < $patch -done - -# This code is currently not used because it creates a long version -# number string. For now we're sticking to <upstream version>-Debian, -# as in 3.0.0rc2-Debian. peloy@debian.org.- - -# ---- Begin unused code ---- -# Get Debian version number from 1st line of the Debian changelog -#DEBIAN_VERSION=`sed -n -e '1s/^.*(\(.*\)).*$/\1/p' debian/changelog` - -# Insert Debian version number in source/VERSION, which will then be -# used to create source/include/version.h. -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1\"Debian-${DEBIAN_VERSION}\"/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION -# ---- End unused code ---- - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) - -exit 0 diff --git a/packaging/Debian/debian-sarge/scripts/unpatch-source b/packaging/Debian/debian-sarge/scripts/unpatch-source deleted file mode 100644 index 3ded1150ba..0000000000 --- a/packaging/Debian/debian-sarge/scripts/unpatch-source +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh -e -# -# - -# We want to reverse the patches in the opposite order we applied -# them, hence the 'ls|sort -r'. -for patch in `ls debian/patches/*.patch | sort -r`; do - patch -p1 -R --ignore-whitespace < $patch -done - -# Unused code. See comment in the patch-source script. - -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) - -exit 0 diff --git a/packaging/Debian/debian-sarge/smb.conf b/packaging/Debian/debian-sarge/smb.conf deleted file mode 100644 index 18f55f3a71..0000000000 --- a/packaging/Debian/debian-sarge/smb.conf +++ /dev/null @@ -1,237 +0,0 @@ -# -# Sample configuration file for the Samba suite for Debian GNU/Linux. -# -# -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options most of which -# are not shown in this example -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentary and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command -# "testparm" to check that you have not many any basic syntactic -# errors. -# - -#======================= Global Settings ======================= - -[global] - -## Browsing/Identification ### - -# Change this to the workgroup/NT-domain name your Samba server will part of - workgroup = DEBIAN_FANS - -# server string is the equivalent of the NT Description field - server string = %h server (Samba %v) - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable its WINS Server -; wins support = no - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# This will prevent nmbd to search for NetBIOS names through DNS. - dns proxy = no - -# What naming service and in what order should we use to resolve host names -# to IP addresses -; name resolve order = lmhosts host wins bcast - - -#### Debugging/Accounting #### - -# This tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 1000 - -# If you want Samba to only log through syslog then set the following -# parameter to 'yes'. -; syslog only = no - -# We want Samba to log a minimum amount of information to syslog. Everything -# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log -# through syslog you should set the following parameter to something higher. - syslog = 0 - -# Do something sensible when Samba crashes: mail the admin a backtrace - panic action = /usr/share/samba/panic-action %d - - -####### Authentication ####### - -# "security = user" is always a good idea. This will require a Unix account -# in this server for every user accessing the server. See -# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc -# package for details. -; security = user - -# You may wish to use password encryption. See the section on -# 'encrypt passwords' in the smb.conf(5) manpage before enabling. - encrypt passwords = no - -# If you are using encrypted passwords, Samba will need to know what -# password database type you are using. - passdb backend = tdbsam - - obey pam restrictions = yes - -; guest account = nobody - invalid users = root - -# This boolean parameter controls whether Samba attempts to sync the Unix -# password with the SMB password when the encrypted SMB password in the -# passdb is changed. -; unix password sync = no - -# For Unix password sync to work on a Debian GNU/Linux system, the following -# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for -# sending the correct chat script for the passwd program in Debian Potato). - passwd program = /usr/bin/passwd %u - passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . - -# This boolean controls whether PAM will be used for password changes -# when requested by an SMB client instead of the program listed in -# 'passwd program'. The default is 'no'. -; pam password change = no - - -########## Printing ########## - -# If you want to automatically load your printer list rather -# than setting them up individually then you'll need this -; load printers = yes - -# lpr(ng) printing. You may wish to override the location of the -# printcap file -; printing = bsd -; printcap name = /etc/printcap - -# CUPS printing. See also the cupsaddsmb(8) manpage in the -# cupsys-client package. -; printing = cups -; printcap name = cups - -# When using [print$], root is implicitly a 'printer admin', but you can -# also give this right to other users to add drivers and set printer -# properties -; printer admin = @ntadmin - - -######## File sharing ######## - -# Name mangling options -; preserve case = yes -; short preserve case = yes - - -############ Misc ############ - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting -; include = /home/samba/etc/smb.conf.%m - -# Most people will find that this option gives better performance. -# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html -# for details -# You may want to add the following on a Linux system: -# SO_RCVBUF=8192 SO_SNDBUF=8192 - socket options = TCP_NODELAY - -# The following parameter is useful only if you have the linpopup package -# installed. The samba maintainer and the linpopup maintainer are -# working to ease installation and configuration of linpopup and samba. -; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & - -# Domain Master specifies Samba to be the Domain Master Browser. If this -# machine will be configured as a BDC (a secondary logon server), you -# must set this to 'no'; otherwise, the default behavior is recommended. -; domain master = auto - -# Some defaults for winbind (make sure you're not using the ranges -# for something else.) -; idmap uid = 10000-20000 -; idmap gid = 10000-20000 -; template shell = /bin/bash - -#======================= Share Definitions ======================= - -[homes] - comment = Home Directories - browseable = no - -# By default, the home directories are exported read-only. Change next -# parameter to 'yes' if you want to be able to write to them. - writable = no - -# File creation mask is set to 0700 for security reasons. If you want to -# create files with group=rw permissions, set next parameter to 0775. - create mask = 0700 - -# Directory creation mask is set to 0700 for security reasons. If you want to -# create dirs. with group=rw permissions, set next parameter to 0775. - directory mask = 0700 - -# Un-comment the following and create the netlogon directory for Domain Logons -# (you need to configure Samba to act as a domain controller too.) -;[netlogon] -; comment = Network Logon Service -; path = /home/samba/netlogon -; guest ok = yes -; writable = no -; share modes = no - -[printers] - comment = All Printers - browseable = no - path = /tmp - printable = yes - public = no - writable = no - create mode = 0700 - -# Windows clients look for this share name as a source of downloadable -# printer drivers -[print$] - comment = Printer Drivers - path = /var/lib/samba/printers - browseable = yes - read only = yes - guest ok = no -# Uncomment to allow remote administration of Windows print drivers. -# Replace 'ntadmin' with the name of the group your admin users are -# members of. -; write list = root, @ntadmin - -# A sample share for sharing your CD-ROM with others. -;[cdrom] -; comment = Samba server's CD-ROM -; writable = no -; locking = no -; path = /cdrom -; public = yes - -# The next two parameters show how to auto-mount a CD-ROM when the -# cdrom share is accesed. For this to work /etc/fstab must contain -# an entry like this: -# -# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 -# -# The CD-ROM gets unmounted automatically after the connection to the -# -# If you don't want to use auto-mounting/unmounting make sure the CD -# is mounted on /cdrom -# -; preexec = /bin/mount /cdrom -; postexec = /bin/umount /cdrom - diff --git a/packaging/Debian/debian-sarge/smbclient.files b/packaging/Debian/debian-sarge/smbclient.files deleted file mode 100644 index 96e8945bf3..0000000000 --- a/packaging/Debian/debian-sarge/smbclient.files +++ /dev/null @@ -1,15 +0,0 @@ -usr/bin/smbclient -usr/bin/smbtar -usr/bin/rpcclient -usr/bin/smbspool -usr/bin/smbtree -usr/bin/smbcacls -usr/bin/smbcquotas -usr/share/man/man1/smbclient.1 -usr/share/man/man1/smbtar.1 -usr/share/man/man1/rpcclient.1 -usr/share/man/man8/smbspool.8 -usr/share/man/man1/smbcacls.1 -usr/share/man/man1/smbcquotas.1 -usr/share/man/man1/smbtree.1 -usr/lib/cups/backend/smb diff --git a/packaging/Debian/debian-sarge/smbfs.files b/packaging/Debian/debian-sarge/smbfs.files deleted file mode 100644 index 359754ebf9..0000000000 --- a/packaging/Debian/debian-sarge/smbfs.files +++ /dev/null @@ -1,12 +0,0 @@ -sbin/mount.smbfs -sbin/mount.smb -sbin/mount.cifs -usr/bin/smbmount -usr/bin/smbumount -usr/bin/smbmnt -usr/share/man/man8/smbmount.8 -usr/share/man/man8/smbumount.8 -usr/share/man/man8/smbmnt.8 -usr/share/man/man8/mount.smb.8 -usr/share/man/man8/mount.smbfs.8 -usr/share/man/man8/mount.cifs.8 diff --git a/packaging/Debian/debian-sarge/smbwrapper.dirs b/packaging/Debian/debian-sarge/smbwrapper.dirs deleted file mode 100644 index fd727bddf0..0000000000 --- a/packaging/Debian/debian-sarge/smbwrapper.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/bin -usr/share/samba diff --git a/packaging/Debian/debian-sarge/smbwrapper.docs b/packaging/Debian/debian-sarge/smbwrapper.docs deleted file mode 100644 index 2924e78734..0000000000 --- a/packaging/Debian/debian-sarge/smbwrapper.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/smbwrapper/README -source/smbwrapper/PORTING diff --git a/packaging/Debian/debian-sarge/smbwrapper.files b/packaging/Debian/debian-sarge/smbwrapper.files deleted file mode 100644 index 08edbead6e..0000000000 --- a/packaging/Debian/debian-sarge/smbwrapper.files +++ /dev/null @@ -1 +0,0 @@ -usr/bin/smbsh diff --git a/packaging/Debian/debian-sarge/swat.config b/packaging/Debian/debian-sarge/swat.config deleted file mode 100644 index e210fae55e..0000000000 --- a/packaging/Debian/debian-sarge/swat.config +++ /dev/null @@ -1,11 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -db_title "Samba Web Administration Tool (SWAT)" - -db_input medium swat/smb_conf_warn || true -db_go diff --git a/packaging/Debian/debian-sarge/swat.dirs b/packaging/Debian/debian-sarge/swat.dirs deleted file mode 100644 index d5df7df4b8..0000000000 --- a/packaging/Debian/debian-sarge/swat.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/sbin -usr/share/samba/swat diff --git a/packaging/Debian/debian-sarge/swat.files b/packaging/Debian/debian-sarge/swat.files deleted file mode 100644 index 82fdf104d3..0000000000 --- a/packaging/Debian/debian-sarge/swat.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin/swat -usr/share/samba/swat -usr/share/man/man8/swat.8 diff --git a/packaging/Debian/debian-sarge/swat.postinst b/packaging/Debian/debian-sarge/swat.postinst deleted file mode 100644 index 338f8a07c2..0000000000 --- a/packaging/Debian/debian-sarge/swat.postinst +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -case "$1" in - configure) - ;; - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - *) - echo "$0: Unknown action \"$1\"" - exit 0 - ;; -esac - -# Set up swat, turned off by default. -update-inetd --group OTHER --add \ - '#<off># swat\t\tstream\ttcp\tnowait.400\troot\t/usr/sbin/tcpd\t/usr/sbin/swat' - -#DEBHELPER# diff --git a/packaging/Debian/debian-sarge/swat.postrm b/packaging/Debian/debian-sarge/swat.postrm deleted file mode 100644 index 6bc5873096..0000000000 --- a/packaging/Debian/debian-sarge/swat.postrm +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# -# - -case "$1" in - purge) - update-inetd --remove '/usr/sbin/swat$' - ;; - remove) - ;; - upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) - ;; - *) - echo "$0: unknown action \"$1\"" - exit 0 - ;; -esac - -#DEBHELPER# - -exit 0 - diff --git a/packaging/Debian/debian-sarge/swat.templates b/packaging/Debian/debian-sarge/swat.templates deleted file mode 100644 index 3407f7efbc..0000000000 --- a/packaging/Debian/debian-sarge/swat.templates +++ /dev/null @@ -1,6 +0,0 @@ -Template: swat/smb_conf_warn -Type: note -_Description: Your smb.conf will be re-written! - SWAT will rewrite your smb.conf file. It will rearrange the entries and - delete all comments, include= and copy= options. If you have a carefully - crafted smb.conf then back it up or don't use SWAT! diff --git a/packaging/Debian/debian-sarge/winbind.dirs b/packaging/Debian/debian-sarge/winbind.dirs deleted file mode 100644 index 1da8fba83a..0000000000 --- a/packaging/Debian/debian-sarge/winbind.dirs +++ /dev/null @@ -1 +0,0 @@ -usr/share/lintian/overrides diff --git a/packaging/Debian/debian-sarge/winbind.files b/packaging/Debian/debian-sarge/winbind.files deleted file mode 100644 index fbb76774d4..0000000000 --- a/packaging/Debian/debian-sarge/winbind.files +++ /dev/null @@ -1,9 +0,0 @@ -usr/sbin/winbindd -usr/bin/wbinfo -usr/bin/ntlm_auth -usr/share/man/man1/wbinfo.1 -usr/share/man/man1/ntlm_auth.1 -usr/share/man/man8/winbindd.8 -lib/security/pam_winbind.so -lib/libnss_winbind.so.2 -lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-sarge/winbind.init b/packaging/Debian/debian-sarge/winbind.init deleted file mode 100644 index 2dfdf3b835..0000000000 --- a/packaging/Debian/debian-sarge/winbind.init +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -# -# Start/stops the winbindd daemon. -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -DAEMON=/usr/sbin/winbindd - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemon is there -test -x $DAEMON || exit 0 - -case "$1" in - start) - echo -n "Starting the Winbind daemon: winbindd" - - start-stop-daemon --start --quiet --exec $DAEMON - - echo "." - ;; - stop) - echo -n "Stopping the Winbind daemon: winbindd" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - - echo "." - ;; - restart|force-reload) - echo -n "Restarting the Winbind daemon: winbindd" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - sleep 2 - start-stop-daemon --start --quiet --exec $DAEMON - - echo "." - ;; - *) - echo "Usage: /etc/init.d/winbind {start|stop|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 - diff --git a/packaging/Debian/debian-sarge/winbind.lintian b/packaging/Debian/debian-sarge/winbind.lintian deleted file mode 100644 index fca17d3cca..0000000000 --- a/packaging/Debian/debian-sarge/winbind.lintian +++ /dev/null @@ -1,6 +0,0 @@ -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_winbind.so lib/libnss_winbind.so.2 libnss_winbind.so -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_wins.so lib/libnss_wins.so.2 libnss_wins.so -winbind: no-shlibs-control-file lib/libnss_winbind.so.2 -winbind: no-shlibs-control-file lib/libnss_wins.so.2 -winbind: postinst-must-call-ldconfig lib/libnss_wins.so.2 -winbind: postrm-should-call-ldconfig lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-sarge/winbind.logrotate b/packaging/Debian/debian-sarge/winbind.logrotate deleted file mode 100644 index e36cd1281c..0000000000 --- a/packaging/Debian/debian-sarge/winbind.logrotate +++ /dev/null @@ -1,10 +0,0 @@ -/var/log/samba/log.winbindd { - weekly - missingok - rotate 7 - postrotate - [ -f /var/run/samba/winbindd.pid ] && kill -HUP `cat /var/run/samba/winbindd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-sarge/wins2dns.awk b/packaging/Debian/debian-sarge/wins2dns.awk deleted file mode 100644 index 176868a115..0000000000 --- a/packaging/Debian/debian-sarge/wins2dns.awk +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/awk -f -# -# Date: Wed, 26 Aug 1998 10:37:39 -0600 (MDT) -# From: Jason Gunthorpe <jgg@deltatee.com> -# To: samba@packages.debian.org -# Subject: Nifty samba script -# -# Here is a really nifty script I just wrote for samba, it takes the wins -# database in /var/samba/wins and writes out two dns files for it. In this -# way network wide wins clients can get into the dns for use by unix -# machines. -# -# Perhaps this could be included in /usr/doc/examples or somesuch. -# - -BEGIN { - FS="#|\""; -FORWARD="/tmp/wins.hosts" -REVERSE="/tmp/wins.rev" -DOMAIN="ven.ra.rockwell.com" -} -$3 == "00" { - split($4,a," " ); - split(a[2],b,"."); - while (sub(" ","-",$2)); - $2=tolower($2); - if (b[1] == "255") - next; - if (length($2) >= 8) - print $2"\ta\t"a[2] > FORWARD - else - print $2"\t\ta\t"a[2] > FORWARD - print b[4]"."b[3]"\t\tptr\t"$2"."DOMAIN"." > REVERSE -} -END { - system("echo killall -HUP named"); -} - diff --git a/packaging/Debian/debian-unstable/README.build b/packaging/Debian/debian-unstable/README.build deleted file mode 100644 index 0a11a1f6ea..0000000000 --- a/packaging/Debian/debian-unstable/README.build +++ /dev/null @@ -1,397 +0,0 @@ -From: Steve Langasek <vorlon@netexpress.net> -To: "Eloy A. Paris" <eloy.paris@usa.net> -Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT) -Subject: Re: autobuilder failure on arm for samba-2.2.1a-3 -In-Reply-To: <20010823100906.A1092@antenas> -Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net> -MIME-Version: 1.0 -Content-Type: TEXT/PLAIN; charset=US-ASCII - -On Thu, 23 Aug 2001, Eloy A. Paris wrote: - -> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote: - -> > Hmm. Maybe the thing to do is to focus on getting config.cache (not log, -> > cache) support into the package. Issues like this are frequent enough with -> > Samba, and the configure tests add enough time to the build process, that I -> > think there'd be much benefit in being able to step past a lot of these. - -> Uhhmmm... I don't know, I guess I don't like much the idea of -> maintaining a config.cache. It looks like extra work plus a -> compilation process that is "synthetic" or atificial. What happens if -> the Samba Team adds a new test, or modifies the configure script, will -> the config.cache pick those up? - -> In any case, you are the expert, so if you think that's the way to go, -> and the burden far exceeds the problems we have right now I say let's -> go for it. I am not well versed on autoconf and the configure process, -> that's all... - -Well, I'll attach my work to the bottom of this message and let you judge it -for yourself. - -The config.cache I'm trying to generate here is not equivalent to what -a configure script outputs. The only values I'm including are those which 1) -are no-brainers on any glibc-based platform, 2) are questions we need to force -a particular value for regardless of the kernel being built against, or 3) are -questions about specific bizarre features of proprietary Unices that we'll -always get an answer of 'no' to. - -I've removed all of the config.cache variables related to headers, or to -checks for particular libraries; I think it's pretty safe to assert that glibc -provides basic C functions like select(), setenv(), and waitpid() on all our -build targets, but I think it's less safe to assert that they'll always be -provided by particular header files. - -So the config.cache won't automatically be updated with answers to new -configure tests, but it also doesn't need to in order to be useful. There's -really only a handful of variables in there that we /need/ in order to -guarantee correctly-built packages, and if you want to leave out everything -else, that's perfectly ok too. Everything from the fifth stanza on down is -just a build-time speed-up for some of the slower architectures. Well, it -also has the fringe benefit that the packages will FAIL to build if someone -tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture. I -see that as a plus :), you may disagree, but in any case my next trick would -be to add a global variable developers can set to bypass the provided -config.cache. - - -It is a little artificial, but the whole point of .debs is to be able to build -binaries in a controlled environment. Right now, we don't really have control -over what happens in the autobuilders. We have even /less/ control over what -happens in a stable release: it's been two weeks now since I built binaries -for bug #94380, and they haven't been uploaded to security.d.o yet. I'm -guessing they won't be uploaded until Wichert is back from vacation, either -- -which is fine, but it would be nice if we didn't have to worry about -mis-builds by the security team, or about putting the security team to extra -trouble after the fact to get packages fixed. - -With a pre-loaded config.cache, we can ensure that bugs of this kind don't -happen in woody. We can take the arm autobuilder problem into our own hands, -and not have to worry about quirkiness in the build environment. We can even -close bug #109773, since we no longer have to worry about detecting the -setuid() routines. - - -So to me, it definitely seems worth it. But you're the maintainer, and I -won't ask you to put anything in the package that you're not comfortable with. - - -> By the way, I think I remember someone was able to build 2.2.x succesfully on -> the ARM. If this is the case, could it be that there's something weird -> with Phillip's setup? - -It could be. There are arm packages for 2.2.1a-1, so at /some/ point the -autobuilder was able to pass the locking test. - - -> P.S. How did you know about the ARM build problems? I don't see any -> bugs about this... - -<http://ftp-master.debian.org/testing/>, follow the links for samba... The -exact reference for the arm autobuilder is at -<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>. - -Regards, -Steve Langasek -postmodern programmer - - -diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog ---- samba-2.2.1a-bak/debian/changelog Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/changelog Thu Aug 23 10:28:08 2001 -@@ -1,3 +1,12 @@ -+samba (2.2.1a-4.1) unstable; urgency=low -+ -+ * Fix up the build system to avoid needing to run configure as root to -+ answer questions we already know the answers to. -+ * In the process, make surprising progress towards being able to -+ cross-compile the samba packages. -+ -+ -- Steve Langasek <vorlon@debian.org> Wed, 22 Aug 2001 23:35:00 -0500 -+ - samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. -diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache ---- samba-2.2.1a-bak/debian/config.cache Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,231 @@ -+# -+# 22 August 2001 Steve Langasek <vorlon@debian.org> -+# -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs. It is not useful on other systems. -+# If it contains results you don't want to keep, you may remove or edit it. -+# -+# By default, configure uses ./config.cache as the cache file, -+# creating it if it does not exist already. You can give configure -+# the --cache-file=FILE option to use a different cache file; that is -+# what configure does when it calls configure scripts in -+# subdirectories, so they share the cache. -+# Giving --cache-file=/dev/null disables caching, for debugging configure. -+# config.status only pays attention to the cache file if you give it the -+# --recheck option to rerun configure. -+# -+# -+# This config.cache file contains a list of acceptable autoconf -+# values which can be used in compiling Samba for Debian woody/sid. -+# -+# Autoconf sorts options alphabetically in its output. This file -+# groups options logically. -+ -+ -+# Load any architecture-specific settings -+if [ -n "$DEB_HOST_GNU_TYPE" \ -+ -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then -+ . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -+fi -+ -+ -+# This is at the top because it's most in need of regular tweaking. -+# These are options which are supported on 2.4 kernels, but not on 2.2 -+# kernels. -+ -+samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -+samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -+samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} -+ -+ -+# These are present in 2.2 kernels, but not in 2.0... -+ -+samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -+samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} -+ -+ -+# POSIX ACL support not present in Linux 2.2; not allowed in the -+# Debian packages, even if present on the build machine. -+ -+ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no} -+ -+ -+# Various basic libc/compiler stuff that it's blindingly obvious that -+# Linux supports (now watch me get bitten for saying that) -+ -+ac_cv_c_const=${ac_cv_c_const=yes} -+ac_cv_c_inline=${ac_cv_c_inline=inline} -+samba_cv_volatile=${samba_cv_volatile=yes} -+ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -+ac_cv_func_bzero=${ac_cv_func_bzero=yes} -+ac_cv_func_chmod=${ac_cv_func_chmod=yes} -+ac_cv_func_chown=${ac_cv_func_chown=yes} -+ac_cv_func_chroot=${ac_cv_func_chroot=yes} -+ac_cv_func_connect=${ac_cv_func_connect=yes} -+ac_cv_func_dup2=${ac_cv_func_dup2=yes} -+ac_cv_func_execl=${ac_cv_func_execl=yes} -+ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -+ac_cv_func_fchown=${ac_cv_func_fchown=yes} -+ac_cv_func_fstat=${ac_cv_func_fstat=yes} -+ac_cv_func_fsync=${ac_cv_func_fsync=yes} -+ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -+ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -+ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -+ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -+ac_cv_func_glob=${ac_cv_func_glob=yes} -+ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -+ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -+ac_cv_func_llseek=${ac_cv_func_llseek=yes} -+ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -+ac_cv_func_memmove=${ac_cv_func_memmove=yes} -+ac_cv_func_memset=${ac_cv_func_memset=yes} -+ac_cv_func_mktime=${ac_cv_func_mktime=yes} -+ac_cv_func_pipe=${ac_cv_func_pipe=yes} -+ac_cv_func_poll=${ac_cv_func_poll=yes} -+ac_cv_func_pread=${ac_cv_func_pread=yes} -+ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -+ac_cv_func_rand=${ac_cv_func_rand=yes} -+ac_cv_func_random=${ac_cv_func_random=yes} -+ac_cv_func_readlink=${ac_cv_func_readlink=yes} -+ac_cv_func_rename=${ac_cv_func_rename=yes} -+ac_cv_func_select=${ac_cv_func_select=yes} -+ac_cv_func_setenv=${ac_cv_func_setenv=yes} -+ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -+ac_cv_func_setsid=${ac_cv_func_setsid=yes} -+ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -+ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -+ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -+ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -+ac_cv_func_srand=${ac_cv_func_srand=yes} -+ac_cv_func_srandom=${ac_cv_func_srandom=yes} -+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -+ac_cv_func_strchr=${ac_cv_func_strchr=yes} -+ac_cv_func_strdup=${ac_cv_func_strdup=yes} -+ac_cv_func_strerror=${ac_cv_func_strerror=yes} -+ac_cv_func_strftime=${ac_cv_func_strftime=yes} -+ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -+ac_cv_func_symlink=${ac_cv_func_symlink=yes} -+ac_cv_func_usleep=${ac_cv_func_usleep=yes} -+ac_cv_func_utime=${ac_cv_func_utime=yes} -+ac_cv_func_utimes=${ac_cv_func_utimes=yes} -+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -+ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -+ac_cv_type_size_t=${ac_cv_type_size_t=yes} -+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -+samba_cv_socklen_t=${samba_cv_socklen_t=yes} -+ -+# Yes, we know Linux supports fcntl locking. Just ignore -+# any errors caused by building on an NFS mount. -+samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} -+ -+ -+# smbwrapper doesn't work because the glibc maintainers don't want -+# to support transparent userland VFS. We might as well preempt -+# any checks for shadowed symbols that are only useful for smbwrapper. -+ -+ac_cv_func___acl=${ac_cv_func___acl=no} -+ac_cv_func__acl=${ac_cv_func__acl=no} -+ac_cv_func___chdir=${ac_cv_func___chdir=no} -+ac_cv_func__chdir=${ac_cv_func__chdir=no} -+ac_cv_func___close=${ac_cv_func___close=no} -+ac_cv_func__close=${ac_cv_func__close=no} -+ac_cv_func___closedir=${ac_cv_func___closedir=no} -+ac_cv_func__closedir=${ac_cv_func__closedir=no} -+ac_cv_func___dup=${ac_cv_func___dup=no} -+ac_cv_func__dup=${ac_cv_func__dup=no} -+ac_cv_func___dup2=${ac_cv_func___dup2=no} -+ac_cv_func__dup2=${ac_cv_func__dup2=no} -+ac_cv_func___facl=${ac_cv_func___facl=no} -+ac_cv_func__facl=${ac_cv_func__facl=no} -+ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -+ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -+ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -+ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -+ac_cv_func___fork=${ac_cv_func___fork=no} -+ac_cv_func__fork=${ac_cv_func__fork=no} -+ac_cv_func___fstat=${ac_cv_func___fstat=no} -+ac_cv_func__fstat=${ac_cv_func__fstat=no} -+ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -+ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -+ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -+ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -+ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -+ac_cv_func___getdents=${ac_cv_func___getdents=no} -+ac_cv_func__getdents=${ac_cv_func__getdents=no} -+ac_cv_func___llseek=${ac_cv_func___llseek=no} -+ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -+ac_cv_func__llseek=${ac_cv_func__llseek=no} -+ac_cv_func___lseek=${ac_cv_func___lseek=no} -+ac_cv_func__lseek=${ac_cv_func__lseek=no} -+ac_cv_func___lstat=${ac_cv_func___lstat=no} -+ac_cv_func__lstat=${ac_cv_func__lstat=no} -+ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -+ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -+ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -+ac_cv_func___open=${ac_cv_func___open=no} -+ac_cv_func__open=${ac_cv_func__open=no} -+ac_cv_func___open64=${ac_cv_func___open64=no} -+ac_cv_func__open64=${ac_cv_func__open64=no} -+ac_cv_func___opendir=${ac_cv_func___opendir=no} -+ac_cv_func__opendir=${ac_cv_func__opendir=no} -+ac_cv_func___pread=${ac_cv_func___pread=no} -+ac_cv_func__pread=${ac_cv_func__pread=no} -+ac_cv_func___pread64=${ac_cv_func___pread64=no} -+ac_cv_func__pread64=${ac_cv_func__pread64=no} -+ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -+ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -+ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -+ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -+ac_cv_func___read=${ac_cv_func___read=no} -+ac_cv_func__read=${ac_cv_func__read=no} -+ac_cv_func___readdir=${ac_cv_func___readdir=no} -+ac_cv_func__readdir=${ac_cv_func__readdir=no} -+ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -+ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -+ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -+ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -+ac_cv_func___stat=${ac_cv_func___stat=no} -+ac_cv_func__stat=${ac_cv_func__stat=no} -+ac_cv_func___stat64=${ac_cv_func___stat64=no} -+ac_cv_func__stat64=${ac_cv_func__stat64=no} -+ac_cv_func___telldir=${ac_cv_func___telldir=no} -+ac_cv_func__telldir=${ac_cv_func__telldir=no} -+ac_cv_func___write=${ac_cv_func___write=no} -+ac_cv_func__write=${ac_cv_func__write=no} -+ac_cv_func___xstat=${ac_cv_func___xstat=no} -+ -+ -+ -+# Miscellaneous stuff that isn't, and shouldn't be, available -+# in Debian. Those interested in building debs for other systems may -+# need to remove some of these defines. -+ -+ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -+ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -+ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -+ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -+ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -+ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -+ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -+ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -+ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -+ac_cv_func_setluid=${ac_cv_func_setluid=no} -+ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -+ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -+ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -+ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -+ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -+ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -+ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -+ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -+ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -+ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -+ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -+ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} -diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux ---- samba-2.2.1a-bak/debian/config.cache.alpha-linux Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache.alpha-linux Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,12 @@ -+# 22 Aug 2001 Steve Langasek <vorlon@debian.org> -+ -+# This file contains autoconf settings specific to the alpha-linux -+# platform that should be preloaded when building for this architecture. -+ -+ -+# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -+# Linux 2.4 does. Ensure that packages compiled for woody remain -+# compatible with 2.2 kernels, even if the build machine is running 2.4. -+samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -+samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} -diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules ---- samba-2.2.1a-bak/debian/rules Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/rules Thu Aug 23 10:28:08 2001 -@@ -15,6 +15,14 @@ - # This has to be exported to make some magic below work. - export DH_OPTIONS - -+# Set the host and build architectures for use with config.cache loading, -+# cross-building, etc. -+DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -+DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -+ -+export DEB_HOST_GNU_TYPE -+export DEB_BUILD_GNU_TYPE -+ - BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb - - DESTDIR=`pwd`/debian/samba -@@ -48,8 +56,11 @@ - # ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ - # --localstatedir=/var - -+ if [ -f debian/config.cache ]; then \ -+ cp -f debian/config.cache source/config.cache; \ -+ fi - # [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp) -- [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) -+ [ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) - - touch configure-stamp - diff --git a/packaging/Debian/debian-unstable/README.build-upstream b/packaging/Debian/debian-unstable/README.build-upstream deleted file mode 100644 index 8efe8164c8..0000000000 --- a/packaging/Debian/debian-unstable/README.build-upstream +++ /dev/null @@ -1,78 +0,0 @@ -Building Samba Packages for Debian GNU/Linux --------------------------------------------- - -Building Debian packages is not as hard as some people might think. -The following instructions will allow you to build your own Samba -Debian packages. These instructions and the files in packaging/Debian/ -should be current as of Samba 3.0.2, and allow you to build Debian -packages for Debian unstable (so you need some development packages -available only in Debian unstable.) If you are using something newer -than 3.0.2 you might want to try to follow the instructions to see if -patches apply cleanly. If some patches don't apply cleanly please e-mail -samba@packages.debian.org since we might have fixed patches that we have -not yet integrated into upstream Samba. - -We try to maintain as much compatibility with previous releases -of Debian as possible, so it is possible that the files in -packaging/Debian/ can also be used to build Samba Debian packages for -other Debian releases. However, sometimes this is just not possible -because we need to use stuff that is only available on Debian unstable. - -Instructions ------------- - -If you want to build Samba packages for Debian and you just want to use -upstream sources, i.e. you don't want to wait for us to put official -packages out, or you want packages for a Debian version for which we -don't provide deb's, or you don't want to use official packages, or -you want to add --this-cool-switch to configure, or whatever, follow -these instructions: - -0) Make sure you have the following packages installed (in addition -to the normal Debian development packages -- dpkg-dev, libc6-dev, -devscripts, etc.): - - autoconf - debhelper (>= 4.1.13) - libpam0g-dev - libreadline4-dev - libcupsys2-dev - libacl1-dev, libacl1 (>= 2.2.11-1) - libkrb5-dev - libldap2-dev - po-debconf - python2.3-dev - - Notes regarding the packages required to build Samba Debian packages: - - * The libcupsys2-dev is not available in Debian Potato (Debian 2.2). - That's fine; the configure script won't detect CUPS support and the - resulting binaries won't support CUPS. - - * The list above is current as of samba-3.0.0rc2, but it can get - out of date. The best way to check what packages are required to - build the samba packages on Debian is to look for the Build-Depends: - field in the file debian/control. - -1) cd samba[-<version>]. For example, "cd samba-3.0.2". -2) cp -a packaging/Debian/debian/ . - It's important that you copy instead of symlink because the build - tools in Potato have a problem that prevents the build to work with - a symlink. If you are running a recent Debian distribution you don't - have to copy the directory and you can use a symlink instead: - "ln -s packaging/Debian/debian/ ." -3) dch -i (this is completely optional - only do it if you understand - Debian version numbers! Don't complain later if you can't upgrade - to official versions of the Samba packages for Debian.) - - Edit the changelog and make sure the version is right. For example, - for Samba 3.0.2, the version number should something like 3.0.2-0.1. -4) Run 'fakeroot debian/rules binary'. -5) That's it. Your new packages should be in ../. Install with dpkg. - -Please e-mail samba@packages.debian.org with comments, questions or -suggestions. Please talk to us and not to the Samba Team. They have -better things to do and know nothing about the Debian packaging system. - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-unstable/README.debian b/packaging/Debian/debian-unstable/README.debian deleted file mode 100644 index 3802e329e5..0000000000 --- a/packaging/Debian/debian-unstable/README.debian +++ /dev/null @@ -1,163 +0,0 @@ -Samba for Debian ----------------- - -This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek -<vorlon@debian.org>, current maintainers of the Samba packages for Debian, -based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew -Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael -Meskes <meskes@topsystem.de>, all previous maintainers of the packages -samba and sambades (merged together for longer than we can remember.) - -Contents of this README file: - -1. Notes -2. Upgrading from Samba 2.2 -3. Packages Generated from the Samba Sources -4. Support for NT Domains -5. Reporting bugs - - -1. Notes --------- - -- As of Samba 2.0.6-1, the Debian version of Samba is compiled with - Pluggable Authentication Modules (PAM) support. PAM support was - discontinued during the libc5 -> libc6 migration process and I never - brought it back until 2.0.6-1. - -- The smbfs package does not support the 2.0.x Linux kernels anymore. - This has been the case since the very first packages of the CVS sources - that eventually became Samba 2.2. To use the smbfs package you need to - run a 2.2.x kernel or later. - -- Starting with the Debian packages for Samba 2.2, the Samba log files (for - nmbd and smbd) have been moved to a new location: /var/log/samba/. The - files also have new names: log.nmbd and log.smbd. The old files - (/var/log/{nmb,smb} were moved to the new location. - - -2. Upgrading from Samba 2.2 ---------------------------- - -Samba 3.0 provides greatly improved support for modern Windows systems, -including support for Unicode and LDAP. In the process, Samba 3.0 -necessarily also breaks backward compatiblity with past releases. These -issues are documented herein; if you are aware of other problems related -to upgrading from Samba 2.2, please let us know at -<samba@packages.debian.org>. - -Samba and LDAP --------------- -Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with -LDAP support. However, the LDAP schema for Samba 3.0 differs -substantially from the schema used by many sites with Samba 2.2 (not -enabled in the Debian packages). If upgrading from an LDAP-enabled 2.2, -you will need to run the convertSambaAccount script found in -/usr/share/doc/samba-doc/examples/LDAP. A copy of the schema itself can -also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema. - -Character Sets --------------- -Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with -Windows clients. Owing to the close similarity between Windows and Unix -NLS charsets, in the past, many users were able to pass filenames -containing non-ASCII characters between clients and servers without -configuring Samba to know what character set was in use. Now, Samba -must be able to convert Unix filenames to Unicode before sending to the -client, so Samba must know what character set the filenames are being -converted from. If you will be sharing files with non-ASCII names, and -the filenames are not encoded with UTF-8, you will need to tell Samba -which character set to use with the 'unix charset' option. - -If you had previously specified 'character set' and 'client code page' -options under 2.2, these settings should be automatically converted for -you. - - -3. Packages Generated from the Samba Sources --------------------------------------------- - -Currently, the Samba sources produce the following binary packages: - -samba: A LanManager like file and printer server for Unix. -samba-common: Samba common files used by both the server and the client. -smbclient: A LanManager like simple client for Unix. -swat: Samba Web Administration Tool -samba-doc: Samba documentation. -smbfs: Mount and umount commands for the smbfs (works with 2.2.x and - above kernels, not with 2.0.x kernels.) -libpam-smbpass: pluggable authentication module for SMB password - database. -libsmbclient: Shared library that allows applications to talk to SMB servers. -libsmbclient-dev: libsmbclient shared libraries. -winbind: Service to resolve user and group information from a Windows NT - server. -python2.2-samba: Python bindings that allow access to various aspects of - Samba. - -Please note that the package smbwrapper (a shared library that provides -SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4 -does not exist any more. The reason is that starting with Samba 2.0.6-1, that -code does not even compile, and the upstream author (Andrew Tridgell) -recommended to disable the compilation of smbwrapper until some issues -with glibc2.1 get cleared out (the problem is with glibc, not with Samba -itself). - - -4. Support for NT Domains -------------------------- - -Samba 2.2 includes preliminary support for NT domains. A Samba server -can now be part of a Windows NT domain whose Primary Domain Controller -is a Windows NT server. This feature is supposed to be stable although I -haven't tried it myself. Read the documentation in the samba-doc package -for help on how to do this (hint: "security = domain" in the smb.conf -file). - -Samba 2.2 has also experimental support for Primary Domain -Controller. This means that a Samba server can act now as a PDC. There -are no special flags needed to compile Samba with NT domain PDC -support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation -section). - -Please note that NT domain PDC support is far from complete and is still -experimental. - - -5. Reporting Bugs ------------------ - -If you believe you have found a bug please make sure the possible bug -also exists in the latest version of Samba that is available for the -unstable Debian distribution. If you are running Debian stable this -means that you will probably have to build your own packages. And if the -problem does not exist in the latest version of Samba we have packaged it -means that you will have to run the version of Samba you built yourself -since it is not easy to upload new packages to the stable distribution, -unless they fix critical security problems. - -If you can reproduce the problem in the latest version of Samba then -it is likely to be a real bug. Your best shot is to search the Samba -mailing lists to see if it is something that has already been reported -and fixed - if it is a simple fix we can add the patch to our packages -without waiting for a new Samba release. - -If you decide that your problem deserves to be submitted to the Debian -Bug Tracking System (BTS) we expect you to be responsive if we request -more information. If we request more information and do not receive -any in a reasonable time frame expect to see your bug closed without -explanation - we can't fix bugs we can't reproduce, and most of the -time we need more information to be able to reproduce them. - -When submitting a bug to the Debian BTS please include the version of -the Debian package you are using as well as the Debian distribution you -are using. Think _twice_ about the severity you assign to the bug: we -are _very_ sensitive about bug severities; the fact that it doesn't -work for you doesn't mean that the severity must be such that it holds -a major Debian release. In fact, that it doesn't work for you it -doesn't mean that it doesn't work for others. So again: think _twice_. - - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-unstable/TODO b/packaging/Debian/debian-unstable/TODO deleted file mode 100644 index 5883f72a92..0000000000 --- a/packaging/Debian/debian-unstable/TODO +++ /dev/null @@ -1,4 +0,0 @@ -Nothing in our list right now. - -Debian Samba Maintainers.- -Sun Apr 6 01:34:21 EST 2003 diff --git a/packaging/Debian/debian-unstable/changelog b/packaging/Debian/debian-unstable/changelog deleted file mode 100644 index bf2b1b6524..0000000000 --- a/packaging/Debian/debian-unstable/changelog +++ /dev/null @@ -1,2662 +0,0 @@ -samba (3.0.20b-2) unstable; urgency=low - - * Don't build with -gstabs any more; -g no longer gives a problematic - size hit, and -gstabs is no longer supported on ia64. - - -- Steve Langasek <vorlon@debian.org> Wed, 19 Oct 2005 19:02:44 -0700 - -samba (3.0.20b-1) unstable; urgency=low - - * Christian Perrier: - - Debconf translations: - - Added Vietnamese. Closes: #317876 - - Updated German. Closes: #322907 - * Steve Langasek: - - Use ${misc:Depends} in debian/control instead of depending on - debconf directly, allowing use of cdebconf as an alternative. - Closes: #332088. - * Noèl Köthe - - corrected libsmbclient priority to optional. Closes: #310045 - - corrected the path of ServerType.html in smb.conf. Closes: #296500 - - updated Standards-Version to 3.6.2 (no changes needed) - - added homepage to description - - switched init scripts (samba and winbind) to lsb-functions - (took patches from ubuntu) - - added Swedish. Closes: #331437 - - removed outdated "guest" value in "passdb backend" in default smb.conf - Closes: #289519 - - moved smbpasswd(5) to samba-common where the binary and smbpasswd(8) - is; Replaces: all previous versions of samba. Closes: #253603 - - new upstream release 3.0.20b (from 2005-10-13). Closes: #324515 - - support for Windows Vista. Closes: #323489 - - Mac OS Tiger Problem fixed. Closes: #309836 - - BUG 2688: re-implement support for the -P (--port) option. - Closes: #307746 - - "man smb.conf" warnings fixed. Closes: #266320 - - testprns removed by upstream so removed in samba.files - - corrected docs/*.pdf names (samba-doc.docs) - - corrected diagnosis.html path (samba.docs) - - removing patches which are included upstream: - dos7-xcopy-always-copies-files.patch - (* BUG 2622: Remove DPTR_MASK as it makes no sense.) - hide-special-file-fix.patch - (* Hide dot files and directory logic fixes.) - rap-printing-bigendian.patch - (* BUG 1998: Correct byte ordering bug when storing - 16-bit RAP print job ids.) - smbclient-vfat-loop.patch - smbclient-vfat-loop2.patch - (* BUG 2698: Fix infinite listing loop in smbclient - caused by an invalid character set conversion.) - - fixed the following patches which didn't applied cleanly - fhs.patch - non-linux-ports.patch - - -- Steve Langasek <vorlon@debian.org> Tue, 18 Oct 2005 19:02:21 -0700 - -samba (3.0.14a-6) unstable; urgency=low - - * Use DEB_HOST_ARCH_OS instead of DEB_HOST_GNU_SYSTEM to detect - Linux in debian/rules, for compatibility with dpkg-dev >= 1.13.9; - add a versioned build-depend accordingly. Closes: #315955 - * Switch to libreadline5. - - -- Steve Langasek <vorlon@debian.org> Fri, 1 Jul 2005 00:13:12 -0700 - -samba (3.0.14a-5) unstable; urgency=low - - * Fix libsmbclient.a to be built as non-PIC instead of PIC. - Closes: #279243. - - -- Steve Langasek <vorlon@debian.org> Wed, 8 Jun 2005 05:46:52 -0700 - -samba (3.0.14a-4) unstable; urgency=high - - * Last-minute upload for sarge, because I don't listen to anything - that RM guy says - * Patch smbmount to strip CAP_UNIX out of the capabilities passed to - the kernel when uid, gid, dmask, or fmask options have been - specified; this keeps the mount permissions from changing out from - under the user when upgrading to a server (or to a kernel) that - supports unix extensions. Closes: #310982. - * Second patch to smbclient search continuation logic, from upstream: - preserve the original UCS2 filename to guard against lossy - conversions, and break out if we find ourselves looping. - Closes: #311157. - * Upstream fix to make print job cancellations work on big-endian - systems when talking to RAP-style clients (i.e., smbclient). - Closes: #311213. - * Add build-dependency on libpopt-dev, so that we consistently use the - system popt lib instead of the bundled one. - - -- Steve Langasek <vorlon@debian.org> Thu, 2 Jun 2005 07:02:46 -0700 - -samba (3.0.14a-3) unstable; urgency=high - - * Urgency set to high for a bug that makes smbclient/libsmbclient - /almost/ mostly unusable - * Fix smbclient's search continuation logic so that it works correctly - against 2K servers offering VFAT-hosted shares; many thanks to - Jeremy Allison for the timely upstream fix. Closes: #309798. - * Update pt_BR debconf translation. Thanks to Andre Luis Lopes - <andrelop@debian.org>. (closes: #308510) - * Add Russian debconf translation, thanks to Yuriy Talakan - <yt@amur.elektra.ru>. (closes: #310063) - - -- Steve Langasek <vorlon@debian.org> Thu, 26 May 2005 23:37:57 -0700 - -samba (3.0.14a-2) unstable; urgency=low - - * Point the sense of the file_is_special() check right way around; - thanks to Matthijs Mohlmann for catching this. Closes: #305747. - * debian/patches/dos7-xcopy-always-copies-files.patch: - Fix the MS-DOS 7 XCOPY copying files over and over bug - Closes: #309003 - * Steve Langasek <vorlon@debian.org>: - - Add Christian Perrier to Uploaders:. Thanks, Christian :) - - -- Steve Langasek <vorlon@debian.org> Sun, 8 May 2005 04:43:21 -0700 - -samba (3.0.14a-1) unstable; urgency=low - - * New upstream version - - A more complete upstream fix for missing files in file listings, - should really give us working (closes: #302771); drop - xp-missing-files.patch, which has been superseded. - * Use the right path when removing mount.cifs binary in the clean - target. Closes: #303318. - - -- Steve Langasek <vorlon@debian.org> Mon, 18 Apr 2005 03:22:29 -0700 - -samba (3.0.11-1) unstable; urgency=high - - * New upstream version - - Fixes duplicated entry in swat(8) manpage (closes: #292957). - - Fix queue handling so that processes serving print clients don't - spin off into infinity and clobber the system (closes: #274969). - - Make sure we use C-locale toupper/tolower functions for case - conversion, since Turkish pairing rules are incompatible - (closes: #286174). - * Fix logrotate script to exit true instead of false when nmbd.pid is - missing (closes: #287263). - * Added Portuguese debconf translation. Thanks to Miguel Figueiredo - <elmig@debianpt.org>. (closes: #286375) - * Added Italian debconf translation. Thanks to Luca Monducci - <luca.mo@tiscali.it>. (closes: #284125) - * Add support for building on the Debian BSD and Hurd ports; thanks to - Robert Millan for the patch. (closes: #266693) - * debian/patches/xp-missing-files.patch: import patch from upstream to - fix missing entries in directory listings when talking to WinXP - servers (closes: #297771). - - -- Steve Langasek <vorlon@debian.org> Wed, 23 Mar 2005 00:13:16 -0800 - -samba (3.0.10-1) unstable; urgency=high - - * New upstream release. - - CAN-2004-1154: integer overflow can lead to remote code execution - by authenticated users; closes: #286023. - * High-urgency upload for sarge-targetted RC bugfix. - * Sync the fhs.patch to samba 3.0.10. - * Install mount.cifs suid root, to make user mounts possible - (closes: #283819). - * debian/patches/cups.patch: Change the default printing system, so we - can compile in CUPS support without making it the default -- CUPS is - not a reasonable default on Debian, at least for sarge. - - -- Steve Langasek <vorlon@debian.org> Fri, 17 Dec 2004 11:56:01 -0800 - -samba (3.0.9-1) unstable; urgency=low - - * New upstream release - - Fixes Win9x printing; closes: #283530, #282571, #283818. - - Fixes a problem with setting dosmodes on filesystems without ACL - support; closes: #283661. - - Drop ldapsam_compat.patch, redundant now that a fix is integrated - upstream - - -- Steve Langasek <vorlon@debian.org> Thu, 2 Dec 2004 01:11:39 -0800 - -samba (3.0.8-2) unstable; urgency=low - - * Fix the module paths for python2.3-samba so that "import foo from samba" - works, and include the __init__.py glue; closes: #222867). - * Enable quota support; closes: #246839. - * Fix missing symbols in libsmbclient (and libnss_wins), and add - -Wl,-z,defs to the libsmbclient link options to prevent future - instances of undefined symbols (closes: #281181). - * Fix for the legacy ldapsam_compat backend; thanks to Fabien - Chevalier for the patch (closes: #274155). - - -- Steve Langasek <vorlon@debian.org> Mon, 15 Nov 2004 06:54:13 -0800 - -samba (3.0.8-1) unstable; urgency=high - - * New upstream package. Urgency set to "high" because of a potential - Denial of Service vulnerability in previous 3.0.x releases - (CAN-2004-0930). (Eloy) - * Introduce new -dbg package, so we can make better sense out of the - cleverly-supplied backtrace emails. (Vorlon) - * Applied patch from Luke Mewburn <luke@mewburn.net> to fix missing - lock_path() to state_path() change in the FHS patches. (Eloy) - - -- Eloy A. Paris <peloy@debian.org> Mon, 8 Nov 2004 13:39:34 -0500 - -samba (3.0.7-2) unstable; urgency=high - - * High-urgency upload for sarge-targetted RC fixes. - * Use autogen.sh in unpatch-source as well as in patch-source, to get - rid of the autom4te.cache cruft. - * debian/patches/make-distclean.patch: add some missing files to the - distclean target in source/Makefile.in (mostly-fixes: #276203). - * Change compile-time default of 'use sendfile' to 'no', since the - current Samba implementation is broken (closes: #261917, #275741, - #270175). - * Add mount.cifs into the smbfs package; thanks to Igor Belyi for - showing us just how simple this patch should be. ;) Since cifs is - the preferred kernel driver in 2.6, bugs related to smbfs and 2.6 - are considered closed unless someone can show that they exist with - the cifs driver as well (closes: #249890, #269443, #227791, #236869, - #260707, #261808, #270175). - * Fix FHS migration code so that it only affects upgrades from old - package versions, and doesn't cause us to mess with non-standard - directories that may have been re-added by the admin - (closes: #251858). - - -- Steve Langasek <vorlon@debian.org> Tue, 26 Oct 2004 01:35:23 -0700 - -samba (3.0.7-1) unstable; urgency=high - - * New upstream release. This release fixes two possible denial of - service conditions; one in nmbd and one in smbd. The CVE numbers - for these vulnerabilities are: - - CAN-2004-0807 for the smbd DoS - CAN-2004-0808 for the nmbd DoS - - Urgency is set to "high" because of these vulnerabilities; so this - new release propagates to testing ASAP. - - Thanks to the Samba Team and the Debian Security Team for the - heads up. - * Remove post-3.0.6 patches that are now in 3.0.7. - - -- Eloy A. Paris <peloy@debian.org> Mon, 13 Sep 2004 00:53:38 -0400 - -samba (3.0.6-4) unstable; urgency=low - - * Update LDAP schema (closes: #269797). - * Applied a couple of upstream fixes that will be present in Samba 3.0.7. - - -- Eloy A. Paris <peloy@debian.org> Tue, 7 Sep 2004 15:28:42 -0400 - -samba (3.0.6-3) unstable; urgency=low - - * Put libsmbclient where it belongs, in /usr/lib. (closes: #267704) - - -- Eloy A. Paris <peloy@debian.org> Wed, 25 Aug 2004 01:58:37 -0400 - -samba (3.0.6-2) unstable; urgency=low - - * Added Danish debconf translation. Thanks to Claus Hindsgaul - <claus_h@image.dk>. (closes: #232884) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 17:24:19 -0400 - -samba (3.0.6-1) unstable; urgency=low - - * New upstream version. - * Incorporate Turkish debconf translation; thanks to Recai Oktas - <roktas@omu.edu.tr>. (closes: #252031) - * Update pt_BR debconf translation. Thanks to Andre Luis Lopes - <andrelop@debian.org>. (closes: #208113) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 12:34:44 -0400 - -samba (3.0.5-2) unstable; urgency=high - - * Patches from Fabien Chevalier <fabien.chevalier@supelec.fr> - to fix: - + libnss_wins crashes other programs (closes: #252591) - + Can't list share files/dirs, but can acces deeper files/dirs - (closes: #264572) - + Samba 3.0.5 Printserver doesn't work with WinXP SP2 (closes: #265871) - * Urgency "high" to make it into testing as soon as possible since - at least #265871 is pretty bad now that WinXP SP2 has been released. - Thanks for the help Fabien! Both Vorlon and I have been very busy - lately. - - -- Eloy A. Paris <peloy@debian.org> Wed, 18 Aug 2004 13:25:41 -0400 - -samba (3.0.5-1) unstable; urgency=high - - * New upstream version. Urgency "high" because of potential buffer - overflows. The security fixes are the only difference between - 3.0.4 and 3.0.5. - - -- Eloy A. Paris <peloy@debian.org> Thu, 22 Jul 2004 08:07:36 -0400 - -samba (3.0.4-5) unstable; urgency=low - - * Doh! Build-depends on libcupsys2-dev (>=1.1.20final+cvs20040330-4), - not an unversioned libcupsys2-dev. (closes# 250523) - - -- Eloy A. Paris <peloy@debian.org> Tue, 25 May 2004 07:43:54 -0400 - -samba (3.0.4-4) unstable; urgency=low - - * Rebuilt with libcupsys2-gnutls10 for unstable. - Closes: #250424, #250483, #250491, #250515, #250523, #250592, #250736 - Closes: #250742, #250733 - - -- Eloy A. Paris <peloy@debian.org> Mon, 24 May 2004 22:32:52 -0400 - -samba (3.0.4-3) unstable; urgency=low - - * Color me stupid; I uploaded an experimental version to unstable. - - -- Eloy A. Paris <peloy@debian.org> Sat, 22 May 2004 00:40:58 -0400 - -samba (3.0.4-1) unstable; urgency=low - - Eloy: - - * New upstream version. - Closes: #247640 (New upstream version available) - Closes: #238905 (Printing crash fix) - Closes: #247090 (panic in viewing printerqueue) - - Vorlon: - - * Incorporate Catalan debconf translations; thanks to - Aleix Badia i Bosch <abadia@ica.es> and the Debian L10n Catalan Team. - (closes: #236640) - * Incorporate Czech debconf translations; thanks to - Miroslav Kure <kurem@upcase.inf.upol.cz> (closes: #236274). - * Update libsmbclient shlibs, due to an incompatibility with older - versions that prevents gnome-vfs from working correctly - (closes: #245869). - - -- Eloy A. Paris <peloy@debian.org> Fri, 21 May 2004 11:42:19 -0400 - -samba (3.0.2a-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 24 Feb 2004 10:30:47 -0500 - -samba (3.0.2-2) unstable; urgency=high - - * Apply patch from Urban Widmark <urban@teststation.com> to prevent - users from mounting remote filesystems containing suid files - (closes: 232327). This represents an exploitable security hole on - systems running Linux 2.6 kernels. - - -- Steve Langasek <vorlon@debian.org> Thu, 12 Feb 2004 21:38:40 -0600 - -samba (3.0.2-1) unstable; urgency=high - - * New upstream release. - - LaMont Jones: correct false failure LFS test that resulted - in _GNU_SOURCE not being defined (thus resulting in strndup() - not being defined) (closes: #226694) - - Segfault fixes. (closes: #230012) (maybe more, but we need bug - reporters to confirm.) - - Urgency "high" due to a password initialization bug that could grant - an attacker unauthorized access to a user account created by the - mksmbpasswd.sh shell script. See WHATSNEWS.txt for details and - workarounds for those not wishing to upgrade (which is a bad idea - anyway since this new release fixes lots of other bugs.) - - -- Eloy A. Paris <peloy@debian.org> Sun, 8 Feb 2004 10:06:29 -0500 - -samba (3.0.1-2) unstable; urgency=low - - * Include ntlm_auth's man page. - * Don't create directories outside of the source directory during - package build time. (closes: #227221, #227238, #225862) - * Don't include the "Using Samba" book in the swat package, just a - symlink that points to the book included in the samba-doc package. - - -- Eloy A. Paris <peloy@debian.org> Tue, 13 Jan 2004 13:48:13 -0500 - -samba (3.0.1-1) unstable; urgency=low - - * New upstream version (closes: #225565) - * Add support in the dhcp hook for netbios scope, and handle better - the case of multiple DHCP-using interfaces (closes: #224109). - * Use "tail -n 1 ..." instead of "tail -1 ..." so POSIX-compliant - tail works. Thanks to Paul Eggert <eggert@twinsun.com>. - * Include /usr/bin/ntlm_auth in the winbind package. - * Run configure with "--with-piddir=/var/run/samba" since the - default got changed to /var/run in this new upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 30 Dec 2003 16:21:31 -0500 - -samba (3.0.0final-1) unstable; urgency=low - - * It's here, it's here, it's here, Samba 3.0.0 is here! - * Incorporate Japanese debconf translations; thanks to Kenshi Muto - <kmuto@debian.org>. (closes: #209291) - - -- Eloy A. Paris <peloy@debian.org> Thu, 25 Sep 2003 13:39:28 -0400 - -samba (3.0.0beta2+3.0.0rc4-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Sep 2003 08:47:56 -0400 - -samba (3.0.0beta2+3.0.0rc3-1) unstable; urgency=low - - * New upstream release. Last Release Candidate according to the - Samba Team. Samba 3.0.0 is around the corner, in a week or so. - - Fixes use of non-PIC code in nss shared libraries (closes: #208773) - - 'unix password sync' option now runs the unix password program as - root again (closes: #209739). - * One-line patch to make packages buildable with distcc (closes: #210227) - - -- Eloy A. Paris <peloy@debian.org> Tue, 9 Sep 2003 07:57:16 -0400 - -samba (3.0.0beta2+3.0.0rc2-1) unstable; urgency=low - - * New upstream release. - * Link against libgnutls7 instead of libgnutls5. (closes: #208151) - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Sep 2003 21:37:13 -0400 - -samba (3.0.0beta2+3.0.0rc1-1) unstable; urgency=low - - * New upstream version (skipped samba 3.0.0beta3 due to time - constraints.) This ugly version number will go away when the final - Samba 3.0.0 is released. - * Drag new unpackaged tools into the packages: smbcquotas (smbclient), - vfs modules (samba), smbtree(1) manpage (smbclient), tdbbackup(8) - manpage (samba). (closes: #151158) - * Switch to DH_COMPAT level 4: - - no explicit conffile listings needed - - the postinst for libsmbclient is now completely autogenerated - - use the default init script handling (with support for - invoke-rc.d) in debhelper, instead of the currently buggy upgrade - path (closes: #185439) - - add support for ${misc:Depends} in control for those packages with - init scripts - * Add versioned dependency on libpam-runtime and change - /etc/pam.d/samba to use the new common PAM config blocks. - * New python2.3-samba package (old python2.2-samba is no more.) - (closes: #206171) - - -- Eloy A. Paris <peloy@debian.org> Mon, 25 Aug 2003 17:05:14 -0400 - -samba (3.0.0beta2-1) unstable; urgency=low - - * New upstream release - - The smb.conf(5) manpage documents config options again - (closes: #197963). - - Handling of winbind/idmap has been restructured; domain members - should be able to map domain accounts to local accounts again - (closes: #196815). - - Use the locale charset for 'display charset' by default - (closes: #194406). - - Fix for segfault in smbclient when using the -b option - (closes: #196833). - - Handle an empty 'passdb backend' list gracefully (closes: #193946). - * Don't set 'display charset' anymore on upgrade, since this is now - grabbed from the locale by default -- a much better option. - * Removed time.c.patch which is now in the upstream sources. - * Update FHS patch for two new tdb files (netsamlogon_cache.tdb, - privilege.tdb). - * Remove python-linker.patch, since the Kerberos package has been - fixed to no longer use rpath - * Remove configure.patch: the hppa glibc bug this was added for is - long since fixed, and upstream isn't interested in supporting this - kludge. - * Update references to missing documentation in sample smb.conf file - (closes: #187632). - * Fix handling of krb5 link line, building on a patch from Stefan - Metzmacher <metze@metzemix.de>. - * Add patch so smbclient's tar support works with popt - (closes: #194921). - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Jul 2003 20:59:09 -0500 - -samba (3.0.0beta1-2) unstable; urgency=low - - * Update build-deps to libacl1-dev (>= 2.2.11-1), libacl1 (>= 2.2.11-1) - to make sure we get the right shlib dependencies (closes: #193149). - * Update the dhcp config hooks so they're suitable for sourcing (i.e., - don't call "exit") (closes: #196477). - * Bring package into line with current policy by adding support for - the DEB_BUILD_OPTIONS flag, and enabling debugging symbols (-gstabs) - by default - * Make sure libpam-smbpass is a self-contained DSO. - * Fix a typo in samba-common.dhcp that caused us to spuriously rewrite - the server list. - * Fix python install script to ignore -Wl linker flags, as seen in the - output from the latest krb5-config. - * Add LDAP and Unicode information about upgrading from 2.2 to - README.debian. - * Remove dangerous and confusing browse options from the default - smb.conf (closes: #198804). - * Reorder smb.conf options for clearer grouping, and clarify the - comments. - * Add a default [print$] share to the sample smb.conf, and create the - necessary tree under /var/lib/samba/printers. (closes: #168173) - * s/winbind/idmap/ in smb.conf, since the option names have changed. - * Fix the patch for postexec handling, so that we chdir("/") at the - right time. - - -- Steve Langasek <vorlon@debian.org> Thu, 12 Jun 2003 15:02:00 -0500 - -samba (3.0.0beta1-1) unstable; urgency=low - - * New upstream version. - - fix for empty browselist bug (closes: #194553) - - fix for tab completion segfault in smbclient (closes: #194776) - - Samba now works as a domain member again without segfaulting - (closes: #194134, #194394, #194775) - - WinXP machines can join a Samba-controlled domain again - (closes: #195362) - * Build-depend on python-dev >= 2.2 instead of on just python-dev - (without version). - * Added Vorlon'n patch to source/lib/time.c to fix #194075. - (closes: #194075) - - -- Eloy A. Paris <peloy@debian.org> Sun, 8 Jun 2003 22:26:43 -0400 - -samba (2.999+3.0.alpha24-3) unstable; urgency=low - - * Make sure Samba DSOs are compiled with -fPIC. (closes: #194324) - * Rebuild against pristine Kerberos libs, to squelch warnings about - versioned symbols. (closes: #194431, #194396) - - -- Steve Langasek <vorlon@debian.org> Thu, 22 May 2003 15:32:00 -0500 - -samba (2.999+3.0.alpha24-2) unstable; urgency=low - - * Fixed description of the smbfs package. (closes: #194183) - * Negate the sense of the unixsam check when upgrading. (closes: #194234) - - -- Steve Langasek <vorlon@debian.org> Wed, 21 May 2003 12:21:53 -0400 - -samba (2.999+3.0.alpha24-1) unstable; urgency=low - - * New upstream version. (closes: #189354) - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 May 2003 13:55:57 -0400 - -samba (2.999+3.0.alpha23-5) unstable; urgency=low - - * Move the python package from section "net" to section "python". - * Make sure we use PIC code for python on all platforms. - * French translation of an additional debconf template, courtesy of - Christian Perrier <bubulle@debian.org>. (closes: #188832) - * Updated Brazilian Portuguese translation from André LuÃs Lopes - <andrelop@ig.com.br>. - * s/unixsam/guest/ everywhere, since the unixsam backend is now - deprecated. (closes: #190095) - * Create our temp config file as /etc/samba/smb.conf.dpkg-tmp; not - only does using /tmp violate SELinux policies, it introduces the - possibility of data loss during the final copy if /tmp is a separate - filesystem. (closes: #189823) - * Pull in fix for SWAT, so that logins work again - (closes: #188255, #192077). - * Move passdb.tdb into /var/lib/samba, since it's not user-editable. - * Make sure with don't ship any .cvsignore files. - * Don't ship examples for python2.2-samba and samba-doc in an - "examples" directory inside another "examples" directory. - - -- Eloy A. Paris <peloy@debian.org> Tue, 6 May 2003 12:05:46 -0400 - -samba (2.999+3.0.alpha23-4) unstable; urgency=low - - * Instead of s/LPT1:/LPT:/, we need to do s/LPT:/LPT1:/ -- now all - non-RPC printing clients are working again. - * Change shlibs to 0 instead of 0.1. The library already in the - archive is using this soname, and there are no packages depending - on libsmbclient, so skip changing the package name for now. - (closes: #188661) - - -- Steve Langasek <vorlon@debian.org> Fri, 11 Apr 2003 14:42:00 -0500 - -samba (2.999+3.0.alpha23-3) unstable; urgency=low - - * Put the Samba Python modules in /usr/lib/python2.2/site-packages/, - not in /usr/lib/python2.2/lib-dynload/. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Apr 2003 19:49:25 -0400 - -samba (2.999+3.0.alpha23-2) unstable; urgency=low - - * New package python2.2-samba that includes the Python modules - included in the Samba sources. Feedback on these modules and the new - package is welcome, as we (Debian Samba maintainers) don't use them. - (closes: #170731, #173322) - * Move libsmbclient-dev from section "devel" to "libdevel". - * Fix panic action script to give a sensible error message instead of - an empty backtrace when we don't have permission to attach to the - process. (closes: #188164) - * Fix libpam-smbpass so that it really does something. (closes: #178245) - * Apply patch to fix printing-related segfaults. (closes: #188076) - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Apr 2003 21:40:33 -0400 - -samba (2.999+3.0.alpha23-1) unstable; urgency=high - - * new upstream release, includes security fix for DSA-262 - * tweak the debconf templates to avoid references to specific - front-ends (closes: #183718) - - -- Steve Langasek <vorlon@debian.org> Sun, 9 Mar 2003 14:58:00 -0600 - -samba (2.999+3.0.alpha21-5) unstable; urgency=low - - * touch up the package descriptions a little bit (caps, punctuation) - * remove addtosmbpass, which snuck back in when we weren't looking - * reverse the position of the wins server tag, after looking more - closely at the code (closes: #183061) - * fix a glitch in the Spanish .po that rendered it invalid, plus a typo - * updated Brazilian Portuguese templates (closes: #183295) - * fix a typo in upstream manpage (s/shave/share/) (closes: #180546) - * run sed before we run sed, to deal with crazybad special chars - in the workgroup name (!) (closes: #176717) - - -- Steve Langasek <vorlon@debian.org> Sat, 1 Mar 2003 15:14:00 -0600 - -samba (2.999+3.0.alpha21-4) unstable; urgency=low - - * add scripts to samba-common to grab the netbios-name-servers options - if we're running a DHCP client (closes: #38413) - * major rearrangement of build scripts: install target now operates on - debian/tmp, not debian/samba, so we can see when new files are - added and decide where to put them; several files that should have - been in samba-common but were in samba (for the above reason) -- - smbcacls, -- have been moved, with a replaces: added. - * Fix rc script so that whitespace is consistent between inetd and - daemon modes (closes: #174677). - * smbclient -M must always connect to port 139, because port 445 - doesn't support messaging and we can't do the port 135 stuff yet - (closes: #175292, #167859). - * Import the diff from upstream CVS, which has fixed a few bugs - (closes: #178219, #177583, #181467, #181487, #181603, #175864). - Remove a few patches of ours which are now superseded. - * Add po-debconf support to the tree, for better i18n. - * Install the libsmbclient.so symlink in the libsmbclient-dev package, - per policy (closes: #181466). - - -- Steve Langasek <vorlon@debian.org> Fri, 27 Dec 2002 00:37:00 -0600 - -samba (2.999+3.0.alpha21-3) unstable; urgency=low - - * Drop --with-ldapsam from the configure options, since this no longer - means what we thought it did. Revert patch for changing the 'passdb - backend' defaults. - * Add patch from CVS HEAD to fix pdbedit segfault; postinst script - should work better now. (Closes: #173936) - - -- Steve Langasek <vorlon@debian.org> Sun, 22 Dec 2002 13:29:00 -0600 - -samba (2.999+3.0.alpha21-2) unstable; urgency=low - - * add CONFIGDIR to the set of directories exported in the install - target, so we don't try to write to /etc/ on the autobuilders. - * Reset the default 'passdb backend' value to something sensible, so - that we don't unnecessarily break upgrading systems (closes: #173731). - - -- Steve Langasek <vorlon@debian.org> Fri, 20 Dec 2002 09:13:00 -0600 - -samba (2.999+3.0.alpha21-1) unstable; urgency=low - - * new upstream release, many patches now incorporated upstream - - -- Steve Langasek <vorlon@debian.org> Mon, 16 Dec 2002 23:39:00 -0600 - -samba (2.999+3.0.alpha20-4) unstable; urgency=low - - * Remove obsolete comments about non-existant LDAP support in the - Debian Samba packages. (Closes: #165035) - * Apply patch for segfault in pam_smbpass when using the unixsam - backend. - * Drop support for nmbd in inetd, since it's not supported by - upstream and is reported to cause problems (closes: #23243, #137726, - 165037). - * Clarify example printing configs in smb.conf (closes: #168174). - * Make sure nmbd still responds to SIGTERM if it has no interfaces to - listen on (closes: #168079). - * Fix to get samba working again on 64-bit archs, after a - pointer<->int size mismatch bug. Already fixed in upstream CVS. - * Merge fix from CVS for broken libsmbclient.h references to internal - structures (closes: #162956). - * Add a default 'panic action' for Samba that will give us genuinely - useful debugging information after a crash. - * Fixed correct patch to example configurations in the libpam-smbpass - packages (closes: #169350). - * acl-dev is not in sid anymore; Build-Depend on libacl1-dev instead - (closes: #169682). - * Only ask the user for permission to edit if there's a chance of us - damaging something. - - -- Steve Langasek <vorlon@debian.org> Mon, 18 Nov 2002 19:53:00 -0500 - -samba (2.999+3.0.alpha20-3) unstable; urgency=low - - * Make sure smbstatus behavior is sane when Samba *has* been started, - as well as when it has not (closes: #164179). Thank to Robbert Kouprie - <robbert@radium.jvb.tudelft.nl> for this patch. - * Not using 'killall' in any of the maintainer scripts (the last one - remaining was winbind.logrotate.) We now just use 'kill' to send - a SIGHUP to a specific PID (which is stored in a file in - /var/run/samba.) - * Do not depend on procps because we're not using killall anymore. - - -- Eloy A. Paris <peloy@debian.org> Tue, 15 Oct 2002 22:15:57 -0400 - -samba (2.999+3.0.alpha20-2) unstable; urgency=low - - * fix an off-by-one error in smbd/lanman.c, which should shut off the - flood of log messages (closes: #157432) - * add a --config-cache option to the configure invocation, since - autoconf 2.5 doesn't load config.cache by default (closes: #163504) - - -- Steve Langasek <vorlon@debian.org> Sat, 5 Oct 2002 01:40:00 -0500 - -samba (2.999+3.0.alpha20-1) unstable; urgency=low - - * new upstream release - - non-primary groups appear to work again (closes: #161271) - * the official beginning of the upstream 3.0 branch - * exit without error from smbstatus when no connections have - been seen yet (closes: #161489) - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Oct 2002 19:02:00 -0500 - -samba (2.999+3.0cvs20020906-1) unstable; urgency=low - - * CVS update - - domain authentication works again (closes: #158698) - * Factor out common code in samba-common.config - * Handle character set settings in smb.conf on upgrade - (closes: #153913, #158770) - * Don't use killall in logrotate script; there are better ways - (closes: #160076) - * Ignore value of 'hostname lookups' for hosts allow/hosts deny - (closes: #154376) - - -- Steve Langasek <vorlon@debian.org> Sat, 7 Sep 2002 11:46:00 -0500 - -samba (2.999+3.0cvs20020829-1) unstable; urgency=low - - * CVS update. - * Move the smb.conf manpage to the samba-common package (closes: #159572) - - -- Steve Langasek <vorlon@debian.org> Thu, 29 Aug 2002 17:53:25 -0500 - -samba (2.999+3.0cvs20020827-1) unstable; urgency=low - - * CVS update. (Closes: #158508) - * Part 1 of 3 of the library separation patch that Vorlon wrote has - gone upstream - removed the patch from our patches/ directory. - * Debconf note to warn users that their smb.conf will be re-written - and changed if they use Swat to maintain it. (Closes: #158479) - * Fixed typo in samba.prerm. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Aug 2002 15:23:23 -0400 - -samba (2.999+3.0cvs20020825-2) unstable; urgency=low - - * scale back the tdbsam migration support, because of undesirable - side-effects; now always defaults to 'no'. - * strip out hyperactive library dependencies that are only needed by - smbd (closes: #155156). - * nuke any broken registry.tdb files left by previous CVS snapshots. - * support rolling back the smbpasswd->tdbsam conversion on downgrade, - since many people are likely to need to downgrade for a while. - * remove postrm handling of legacy directories, and add handling of - current ones. - - -- Steve Langasek <vorlon@debian.org> Sun, 28 Jul 2002 09:44:24 -0500 - -samba (2.999+3.0cvs20020825-1) unstable; urgency=low - - * CVS update. These packages are based on Samba 3.0alpha19 + any - code commited after 3.0alpha19 was released. - - -- Eloy A. Paris <peloy@debian.org> Sun, 25 Aug 2002 14:56:46 -0400 - -samba (2.999+3.0cvs20020723-1) unstable; urgency=medium - - * remove spurious line from samba.config - * migrate from smbpasswd to tdbsam - * re-add the pdbedit util and manpage - * compile in ldapsam support (closes: #146935) - * add PRIVATEDIR to the list of vars we override for the install - target, so Samba doesn't try to create /etc/samba (closes: #153746). - * fix makefile handling of LOGBASEDIR, so that logs always end up in - the right place (closes: 153727). - * Fixed bug in the FHS migration path that causes nmbd to read its - state from one location, but write it out to another. (closes: #154210) - * Make sure nmbd is always looking for wins.tdb in the same place. - - -- Steve Langasek <vorlon@debian.org> Fri, 19 Jul 2002 21:38:54 -0500 - -samba (2.99.cvs.20020713-1) unstable; urgency=low - - * first attempt for 3.0pre. - * only post a debconf note about moving logfiles if we're upgrading - from a version that had the logfiles in the old location - (closes: #152924). - - -- Steve Langasek <vorlon@debian.org> Sat, 13 Jul 2002 12:54:25 -0500 - -samba (2.2.5-2) unstable; urgency=low - - * No longer ship make_printerdef, which is deprecated. (closes: #63059) - * Clean up some empty directories from the samba package. - * Add call to dh_installinit for winbind rc.x symlinks (closes: #151860). - * Clean up per-package documentation lists, to reduce clutter - (closes: #147638). - * Make sure we don't ship pdbedit's man page since we are still using - smbpasswd passwords. (closes: #152208) - * move libnss_wins.so to libnss_wins.so.2, where glibc expects to find - it (closes: #148586). - * reorder postinst, so that installing samba-common from scratch loads - the debconf answers properly (closes: #151985). - * add lintian overrides for winbind, to eliminate some noise. - * rename pam_smbpass changelog to comply with policy. - - -- Steve Langasek <vorlon@debian.org> Sun, 23 Jun 2002 22:45:04 -0500 - -samba (2.2.5-1) unstable; urgency=low - - * New upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 9 Jun 2002 15:49:21 -0400 - -samba (2.2.4+2.2.5pre1-1) experimental; urgency=low - - * Getting ready for Samba 2.2.5. - * Remove patches/parse_spoolss.patch, now included upstream. - * Fixed thinko WRT POSIX ACL support, which we "half-enabled" in - 2.2.4-1. We don't use POSIX ACL support ourselves, so we'd - appreciate reports from those using this feature so we can - be sure this works. - * Fix the filename-matching algorithm used for smbtar's 'exclude' - functionality. (closes: #131571) - * Look for secrets.tdb in /var/lib/samba, and handle in the postinst. - This is not really a config file, because users don't edit it. - (closes: #147429) - * Doxygen fix for libsmbclient.h, thanks to Tommi Komulainen - <Tommi.Komulainen@iki.fi> for the patch. (closes: #144847) - - -- Eloy A. Paris <peloy@debian.org> Tue, 28 May 2002 11:33:51 -0400 - -samba (2.2.4-1) unstable; urgency=low - - * New upstream release (closes: #144713) - * Building with POSIX ACL support (closes: #137819) - * Include samples, exclude INSTALL from libpam-smbpass (closes: #145055) - * Compile with --with-automount, for NIS homedir support (closes: #123396) - * Add a proper 'flags' field to the mount entry we write to /etc/mtab; - fixes a display bug with mount (closes: #140397) - * Added logic to /etc/init.d/samba so a help message is printed out - when Samba is running from inetd _and_ we are not booting, i.e. the - user called the init script manually. Thanks to Francesco - Potorti <pot@gnu.org> for the suggestion on how to implement this. - (Closes: #139807, #140204) - * samba.postinst: added logic so we don't call /etc/init.d/samba if - we are running from inetd (this prevents the stupid help message - to be printed during package upgrades if we are running from inetd.) - * samba.prerm: idem. - * /etc/init.d/samba: delete stale PID files after nmbd and smbd are - stopped. This prevents start-stop-daemon from printing an ugly - error message when called from '/etc/init.d/samba stop'. I prefer - this than running start-stop-daemon with --oknodo because - start-stop-daemon might print other important error messages that with - --oknodo it would otherwise not print. (Closes: #102187, #109301) - * Patch from jerry@samba.org to fix parsing of spoolss structures. - - -- Eloy A. Paris <peloy@debian.org> Thu, 23 May 2002 23:16:52 -0400 - -samba (2.2.3a-7) unstable; urgency=medium - - * More README.debian updates. - * Neutralize the smb.conf 'lock dir' directive, which doesn't mean - what the FHS says it should, and causes us no end of grief. - (Closes: #122299) - * LPRng-handling patch so that jobs printed to recent versions of - LPRng show up properly as 'done' instead of 'paused' in the Windows - print queue. Thanks to Jaroslav Serdula <serdula_jaroslav@vse.sk> - for this patch. (Closes: #139458) - * Applied patch from Urban Widmark <urban@teststation.com> - (smbfs upstream maintainer) to add a '-n' option to smbmount - that does the same as mount's '-n'. (Closes: #139590) - * Minor tweak to unpatch-source so we unpatch sources in the - reverse order we patched them. - * Don't depend on grep in samba.prerm to determine if Samba was - running before the upgrade starts. - * Tweak the wording of debconf templates. - * Incorporate debconf translations for French, Spanish and Portuguese; - thanks to Carlos Valdivia Yagüe <valyag@hotpop.com> (es), - Andre Luis Lopes <andrelop@ig.com.br> (pt_BR), and Philippe - Batailler and Denis Barbier <barbier@debian.org> (fr). - (closes: #142657, #142659, #141551, #141699, #141682) - * Fixed symlinks in the swat package so the point to /usr/share/doc/ - instead of /usr/doc/. Added note to the description of the - swat packages that says that samba-doc must be installed for - the on-line documentation to work. Thanks to Torne Wuff - <torne@wolfpuppy.org.uk>. (Closes: #95437) - * 'dh_installinit -n' gives us no initscript handling -- we need to - handle all starting and stopping of daemons ourselves, which wasn't - happening in the {pre,post}rm scripts. - * Vary the priority of the debconf question "Do you want to generate - /etc/samba/smbpassd?" depending on whether the file already exists. - File exists -> priority 'medium', file does not exist -> priority - 'low'. Changed priorities of all other questions from 'high' to 'medium'. - - -- Steve Langasek <vorlon@debian.org> Sat, 20 Apr 2002 17:48:27 -0400 - -samba (2.2.3a-6) unstable; urgency=low - - * Call db_stop as soon as we're done with debconf in the postinst, to - avoid hanging bugs (closes: #137813) - * Ony call 'update-inetd --add' on first installation, just as we only - call 'update-inetd --remove' on package purge. - * Bring our shipped smb.conf closer in line with the upstream - defaults: don't twiddle the send/recv buffer sizes, since the Linux - kernel already provides a much better default setting - (closes: #80966, #80934, #137415, #133477) - * Added libnss_wins.so to the winbind package (closes: #137201) - * Updates to README.debian. - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 Mar 2002 10:57:40 -0500 - -samba (2.2.3a-5) unstable; urgency=low - - * Having multiple workgroup lines in your smb.conf, though wacky, is - perfectly valid. Account for this in samba-common.config. - (closes: #137157) - - -- Steve Langasek <vorlon@debian.org> Sun, 10 Mar 2002 21:52:51 -0600 - -samba (2.2.3a-4) unstable; urgency=low - - * Fixed typo in samba.postinst. Cosmetic fixes there as well. - * Fix to improper usage of /usr/bin/tr in samba-common config script - (closes: #137744) - - -- Steve Langasek <vorlon@debian.org> Sat, 9 Mar 2002 14:14:02 -0500 - -samba (2.2.3a-3) unstable; urgency=medium - - * Make sure /etc/init.d/samba is executable before calling it - in the postinst. Quickly checked all other maintainer scripts - to make sure we are not calling an init script if it is not - executable. (closes: #137321) - * Fix up maintainer scripts to detect if samba was not running before - an upgrade. (closes: #33520, #130534) - * Make sure /etc/samba/ is included in the samba-common package. - Closes: #137157 - - -- Steve Langasek <vorlon@debian.org> Fri, 8 Mar 2002 11:13:21 -0500 - -samba (2.2.3a-2) unstable; urgency=low - - * merge in debconf support: - - Moved all smb.conf-related questions to samba-common (smb.conf - is part of the samba-common package, not the samba package.) - - smb.conf is not a samba-common conffile anymore since it is - being managed by debconf. It is ABSOLUTELY necessary to make - sure /etc/samba/smb.conf _NEVER_ gets overwritten by changes - made via debconf. In other words, any changes made by the user - should be honored by the debconf interface. - - samba.postinst now moves old log files from /var/log/ to - /var/log/samba/. There's a Debconf note that informs the user - the log files are stored now in a new location. - - debian/control: - + Make samba depend on debconf. - - New file debian/samba.templates. - - New file debian/samba.config. - - Re-worked debian/samba.postinst. - + Got rid of all /etc/samba/debian_config sillyness. - - remove /usr/sbin/sambaconfig; "dpkg-reconfigure samba" replaces - it. - - Removed debian/samba.prerm. - - Cleaned up /etc/init.d/samba. - + Added infrastructure for debconf. - + Got rid of all /etc/samba/debian_config sillyness. - + Got rid of /etc/samba/smbpasswd conversion stuff for - compatibility with versions of Samba < 2.0.0final-2. - (closes: #127959, #34408, #113594) - * make samba.postinst ignore the absence of /var/log/{s,n}mb*; - makes for a clean upgrade path. - * Building with MSDFS support (closes: #116793) - - -- Steve Langasek <vorlon@debian.org> Tue, 5 Mar 2002 14:14:33 -0600 - -samba (2.2.3a-1) unstable; urgency=low - - * New upstream version (closes: #135001) - * Potato builds were failing because debian/rules was not creating - debian/winbind/etc/logrotate.d/. A user having problems creating - Potato packages brought this to my attention. dh_installlogrotate - takes care of creating the directory for us, that's why we didn't - notice. - * Removed code that converts /etc/samba/smbpasswd from an ancient - format to the new format of Samba 2.0.0 and later. - Closes: #134375 - samba: postinst failed due to missing - /usr/bin/convert_smbpasswd. - * Re-organized FHS migration code in samba.postinst. Make sure we - don't fail when we move files that don't exist. - Closes: #133813 - samba: Install failed. - * Adding docs. to the libpam-smbpass package. - * Remove man pages for findsmb because we are not providing this - script. - Closes: #134181 - findsmb referenced, but not included. - * Removed replace.patch because it is now present upstream. - * Added patch from Jerry Carter to fix a problem when saving - document preferences for printing from NT clients. - * The real winbindd daemon is a forked process so we can't use - --make-pidfile when calling start-stop-daemon. Fixed - /etc/init.d/winbind to work around the issue. Thanks to - Lin Li <linl@xandros.com> for the patience and for reporting - the problems. Hopefully I got it right this time. - - -- Eloy A. Paris <peloy@debian.org> Wed, 20 Feb 2002 18:39:03 -0500 - -samba (2.2.3-6) unstable; urgency=low - - * Make sure there are actual files in /var/state/samba before trying - to move them (Closes: #133534, #133510). - * Fix up the 2.2.3 makefile so that pam_smbpass builds correctly - again. - - -- Steve Langasek <vorlon@debian.org> Tue, 12 Feb 2002 09:19:29 -0600 - -samba (2.2.3-5) unstable; urgency=low - - * Whoops, missed a spot on the samba.postinst -- will fail badly if - /var/state/samba/ no longer exists. Better get this fix into the - next upload. ;) (Closes: #133088) - * Regenerate configure only if it is older than configure.in. - * Fix smbd handling of network neighborhood lists, which was missed - in the FHS conversion (Closes: #133091) - - -- Eloy A. Paris <peloy@debian.org> Sat, 9 Feb 2002 16:37:57 -0500 - -samba (2.2.3-4) unstable; urgency=low - - * FHS cleanup; files in /var are now properly sorted according to - their nature. (Closes: #102101) - * Remove patches to source/configure, since we now call autoconf to - regenerate this file cleanly. - * lintian fixes: - - Create winbind.conffiles and add /etc/logrotate.d/winbind and - /etc/init.d/winbind to it. - - Use a relative symlink for /usr/lib/cups/backend/smb. - - Removal of a .cvsignore file in the samba-doc package. - * winbind.init fixes: - - Corrected name of the pid file (Steve) - - Make start-stop-daemon create a pid file for winbindd since it - does not create one on his own. - * #DEBHELPER# is not needed in samba.postinst because we are adding - manually everything that debhelper adds automatically. In fact, - since we are calling update-rc.d without standard paramaters I - think we can't use #DEBHELPER#. - * Fix fatal syntax error in samba.prerm. - - -- Steve Langasek <vorlon@debian.org> Thu, 7 Feb 2002 13:12:08 -0500 - -samba (2.2.3-3) unstable; urgency=low - - * work on lintian-cleanness in the package (wrong permissions, - maintainer scripts in need of debhelpering) - * /lib/security/pam_smbpass.so is now being included in the - libpam-smbpass package only, and not in both the libpam-smbpass and - samba packages (which was the case prior to 2.2.3-3.) - * Instead of making our patch scripts executable in the rules file - we run them through /bin/sh. - * New 'winbind' package that has all the winbind stuff that was in the - samba package in 2.2.3-2 and before. - * Added replace.patch: patch from Jeremy Allison to fix problems when - replacing or overwriting files in a Samba share. Patch was sent to - the samba mailing list. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Feb 2002 21:12:48 -0500 - -samba (2.2.3-2) unstable; urgency=low - - * add support to debian/scripts/{patch-source,unpatch-source} for - automatic updating and cleaning of <version.h>. This was a request - from the Samba Team: they wanted us to clearly mark our packages - so it is always known a user is running Samba with (possibly) - Debian-specific patches. - * Change init.d killscript link to K19samba, so we stop before autofs - (closes: 117327) - * Make our patch scripts executable in the rules file -- dpkg won't do - this for us (closes: #132415). - - -- Steve Langasek <vorlon@debian.org> Mon, 4 Feb 2002 09:51:00 -0600 - -samba (2.2.3-1) unstable; urgency=low - - * New upstream release (closes: #131228). - * Restructured build system that provides DBS-like separation of - patches - * Fix typo in smbfs description (closes: #116209). - * Use killall -q in logrotate.d script, to avoid spurious cron - emails (closes: #130100). - - -- Steve Langasek <vorlon@debian.org> Sat, 2 Feb 2002 19:56:18 -0500 - -samba (2.2.2-12) unstable; urgency=high - - * (Steve) Patch for source/client/client.c. - Closes: #86438 smbclient: Transfering several GB causes the average - speed to be messed up. - * Uploading with urgency=high to expedite the move from unstable - to testing because of the security problem fixed in -11. - - -- Eloy A. Paris <peloy@debian.org> Fri, 25 Jan 2002 22:31:12 -0500 - -samba (2.2.2-11) unstable; urgency=low - - * Building with --with-libsmbclient. We have created two new - packages: libsmbclient and libsmbclient-dev. Hopefully this - will help some people that want to add the capability of - speaking SMB to their applications. - Closes: #117132 - libsmbclient support library? - * (Steve) Make swat do the right thing when reading (parsing) - the saved preferences in smb.conf. - Closes: #55617 swat mutilates the linpopup message command. - * Updated README.Debian. Updated descriptions in debian/control. - * Remembered to bump up version number in source/include/version.h - (need to automate this or else I'll keep forgetting.) - * (Steve) one liner for source/web/diagnose.c. - Closes: #106976 - smbd/nmbd not running message with swat/linuxconf. - * Added '|| true' to the post-rotate script so logrotate doesn't - fail if either nmbd or smbd is not running. - Closes: #127897 - /etc/logrotate.d/samba fails if there is no smbd process. - * Fixed incorrect file locations in swat's man page and added a - Debian-specific note to /usr/share/doc/swat/README. - Closes: #71586 swat: needs documentation fixes for debian. - * smbmount in the smbfs package does not have the setuid bit set. - Apparently, smbmount uses libsmb without checking the environment. - Thanks to Christian Jaeger <christian.jaeger@sl.ethz.ch> for - finding the local root exploit. - * Applied old patch from Jerry) Carter" <jerry@samba.org> to correct - the following two problems in Samba 2.2.2: - - %U and %G could not be used in services names - in smb.conf. - - %G would fail to be expanded in an "include = ..." - line. - - -- Eloy A. Paris <peloy@debian.org> Sat, 19 Jan 2002 21:35:26 -0500 - -samba (2.2.2-10) unstable; urgency=low - - * (Steve) Add missing manual pages. - Closes: Bug#128928: missing manpages in smbfs. - - -- Eloy A. Paris <peloy@debian.org> Sun, 13 Jan 2002 14:39:55 -0500 - -samba (2.2.2-9) unstable; urgency=low - - * (Steve) Fix broken URL's in HTML docs. - Closes: Bug#17741: bad links in html docs (at last!!!) - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 13:37:07 -0500 - -samba (2.2.2-8) unstable; urgency=low - - * Added "Replaces: samba (<= 2.2.2-5)" to the smbclient section in - debian/control so rpcclient.1, which was in samba-2.2.2-5, does not - cause problems now that it is part of smbclient (>= 2.2.2-6). Closes: - Closes: Bug#128684: error upgrading smbclient in sid. - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 11:42:40 -0500 - -samba (2.2.2-7) unstable; urgency=low - - * (Steve) Patch to make behavior honor what the docs. say about "hosts allow" - taking precedence over "hosts deny". - Closes: Bug#49249: swat: error with host deny ?! - - -- Eloy A. Paris <peloy@debian.org> Thu, 10 Jan 2002 12:36:58 -0500 - -samba (2.2.2-6) unstable; urgency=low - - * (Steve) Adds manpage for rpcclient to the proper file, - removes smbtorture from the distro because this tool isn't intended for - widespread consumption. - Closes: #63057 - no manual page for smbtorture. - * (Steve) Removed -gnu from the configure arguments (--build, --host) in - debian/rules so config.sub is able to properly create the host and target - tuples. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Jan 2002 14:39:51 -0500 - -samba (2.2.2-5) unstable; urgency=low - - * Fixes from vorlon: - * Use /usr/bin/pager instead of more. - Closes: #125603: smbclient violates pager policy. - * Make /etc/logrotate.d/samba a conffile, send smbd and nmbd - a SIGHUP to have the log files reopened, fixes to - /etc/logrotate.d/samba. - Closes: #127897: log file rotation. - Closes: #118277: /etc/logrotate.d/samba not listed in conffiles. - * s/covert/convert/. - Closes: #121653 probable typo in install message. - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Jan 2002 03:14:58 -0500 - -samba (2.2.2-4) unstable; urgency=low - - * Applied patch from Steve to work around problem in glibc that affects the - HPPA architecure. The patch detects the error condition at configure time - and compiles without LFS support if necessary. - Closes: Bug#126763: samba completely broken on hppa. - * Including unicode_map.1251. - Closes: Bug#126719: samba-common: unicode_map.1251 missing. - * Updated smbd daemon version to match Debian package version. - Closes: Bug#127199: Package version and smbd daemon version don't match. - - -- Eloy A. Paris <peloy@debian.org> Mon, 31 Dec 2001 14:32:47 -0500 - -samba (2.2.2-3) unstable; urgency=low - - * Added some spaces in package description in debian/control. - Closes: #120730 - missing spaces in package description for nice - alignment. - * Spelling fixes. - Closes: #125328, #125329, #125330, #125367, #125365, #125403. - * Steve Langasek <vorlon@debian.org> is the co-maintainer of the Debian - Samba packages!!! Added him to the uploaders field in debian/control. - - -- Eloy A. Paris <peloy@debian.org> Tue, 18 Dec 2001 00:54:25 -0500 - -samba (2.2.2-2) unstable; urgency=low - - * Backed out changes to source/filename.c per Andrew Tridgell's request. - This changes were introduced in 2.2.1a-7 as an attempt to fix #47493. - Tridge found out that they break smbd. - * Changed version number in source/includes/version.h so it is clear that - this is a version of Samba packaged for Debian. This is another request from - Tridge and will help the Samba Team to get bogus bug reports. - * Added Samba-HOWTO-Collection.pdf and other README files to the - /usr/share/doc/<package>/ directories. - * Installing libnss_winbind.so and pam_winbind.so. - Closes: #116790: nss and pam modules for winbind missing. - * Removed user-emacs-settings from changelog. - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Oct 2001 19:16:26 -0500 - -samba (2.2.2-1) unstable; urgency=low - - * New upstream version. - * Temporary fix for #113763 (Steve Langasek) - * Quick hack to avoid smbmount reveal password length. Please note - that even with this hack there is a small window when password is - completely visible with 'ps aux'. There are other methods that should - be used to automate mounting of SMB shares. - Closes: #112195: smbmount-2.2.x reveals password length. - * Applied patch from Steve Langasek <vorlon@debian.org> to prevent - forcing use of setresuid() in Sparc. - Closes: #112779: samba build forces use of setresuid, which causes - smbd to fail on Sparc. - - -- Eloy A. Paris <peloy@debian.org> Mon, 15 Oct 2001 10:26:10 -0400 - -samba (2.2.1a-9) unstable; urgency=low - - * Replaced $(LD) with $(CC) all the way through source/Makefile. - Closes: #111036: ld shouldn't be used to link shlibs. - * s/\/bin\/mail/\/usr\/bin\/mail/ in smb.conf's man page (HTML and - sgml as well.) - Closes: #110963: smb.conf: mail should be /usr/bin/mail. - * Documented better smbclient's -W behavior. Patch from Steve - Langasek. - Closes: #53672: smbclient: -W flag is interpreted as domain, not - workgroup. - - -- Eloy A. Paris <peloy@debian.org> Tue, 4 Sep 2001 23:10:41 -0400 - -samba (2.2.1a-8) unstable; urgency=low - - * Set some reasonable default perms for the samba logdir (again, - thanks to vorlon :-) - Closes: #72529: insecure permissions on log files. - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 15:40:47 -0400 - -samba (2.2.1a-7) unstable; urgency=low - - * Another attempt at fixing #47493. Patch from Steve Langasek - <vorlon@netexpress.net>. Let's keep our fingers crossed Steve! - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 13:37:06 -0400 - -samba (2.2.1a-6) unstable; urgency=low - - * Backed out fix to #47493 introduced in 2.2.1a-4 as it is causing - smbd to die with signal 11 under some unidentified situations. - Closes: #109774: Latest debian version breaks printer driver download. - Closes: #109946: not all files appear in samba-exported directories. - * Another patch from Steve Langasek. This one adds quotes around - printer names for print systems it's reasonable for Debian to - support. Together with the patch in #29957 (see changelog for - 2.2.1a-4), this should take care of the problems with multi-word - printer names in Samba. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 21:12:27 -0400 - -samba (2.2.1a-5) unstable; urgency=low - - * Important changes that affect how Samba is built on Debian - machines are implemented in this release. All of this changes - were suggested by the energetic Steve Langasek <vorlon@debian.org>, - and his arguments were so sound and reasonable that I decided - to implement them. Here's Steve's original changelog: - - * Fix up the build system to avoid needing to run configure - as root to answer questions we already know the answers to. - * In the process, make surprising progress towards being able to - cross-compile the samba packages. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 01:08:06 -0400 - -samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. - Closes: #109317: smbfs: mistype in smbmount manpage. - * Included symlink to smbspool to better support CUPS printing. - Closes: #109509: include symlink for cups samba support. - * Applied patch from Steve Langasek <vorlon@netexpress.net> to - fix bug #29957. - Closes: #29957: samba strips trailing " from strings in smb.conf. - * First attempt at fixing #47493. Another patch from Steve "I want - a bug-free Samba" Langasek. - Closes: #47493: Samba doesn't handle ':' in dir names right. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Aug 2001 23:26:38 -0400 - -samba (2.2.1a-3) unstable; urgency=low - - * Steve Langasek <vorlon@netexpress.net> has been hard at work in - the last few days looking at the long list of open bugs filed - against the Samba packages. I don't know how to thank him. It's been - a pleasure working with Steve, and all the fixes, patches, etc. in - this release come from him. The bug list is greatly reduced thanks - to Steve's efforts. - * Steve's additions/modifications/patches/etc. are: - - New package that (libpam-smbpass) provides pam_smbpass. Before, this - was provided in another package but now the sources are part of - the Samba sources so we can start providing it from here. - Closes: #107043 - pam_smbpass now present in Samba source, - should be built from there - - Patch to source/smbd/service.c that allows admins to call - /bin/umount from the root postexec of a Samba share. - Closes: #40561 - samba pre/postexec commands do not work. - - Clear TMPDIR before starting smbd in /etc/init.d/samba. - Closes: #51295 - Problems with Samba and TMPDIR. - - Correction to documentation of "guest only". - Closes #38282 - "guest only" share still requires a password. - * Applied patch from Santiago Vila <sanvila@unex.es> to convert - /usr/sbin/mksmbpasswd from a shell script into a real awk script. - Sorry it took so long, Santiago; I hadn't realized you even - provided a patch :-) - Closes: #77891 - mksmbpasswd could be a real awk script. - * Updated description of the smbfs and smbclient packages. Also have - each package recommend the other. - Closes: #108650: Should suggest or recommend smbfs. - - -- Eloy A. Paris <peloy@debian.org> Mon, 13 Aug 2001 22:21:55 -0400 - -samba (2.2.1a-2) unstable; urgency=low - - * Build-depends: depend on debhelper (>=2.0.103). - Closes: #105795: Build-Depends are wrong. - * Run samba's preinst and postinst scripts without -e so failed commands - do not abort installation. - Closes: #106384: postinstall crashes abnormally. (And really closes - #104471.) - - -- Eloy A. Paris <peloy@debian.org> Thu, 26 Jul 2001 00:30:37 -0400 - -samba (2.2.1a-1) unstable; urgency=low - - * New upstream version. - * Make sure samba's postinst script exits with a zero status. - Closes: #104471: Samba postinst problem. - - -- Eloy A. Paris <peloy@debian.org> Thu, 12 Jul 2001 21:55:21 -0400 - -samba (2.2.1-1) unstable; urgency=low - - * New upstream version. - Closes: #103339: config.guess and config.sub update required. - Closes: #98518: Samba 2.2 can't act as PDC for NT4/W2K due to - incompatibility with PAM. - Closes: #97447: nmbd crashes due to bugs in DAVE 2.5.2. - Closes: #95777: Samba 2.2 is unable to join or authenticate against - Samba 2.2 PDC domain. - Closes: #68842: samba should use PAM for password changing (I - haven't personally tried this one, but it's been - advertised this works.) - Closes: #102506: PAM account checking fails. - Closes: #102518: Complains about unknown paramter "obey pam - restrictions" - Closes: #94774: Build failure on PARISC machines. - * Moved away from /etc/cron.weekly/samba for log file rotation. - Now using logrotate. - Closes: #95548: typo in /etc/cron.weekly/samba. - Closes: #74951: nmbd does not rename its log file. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Wed, 11 Jul 2001 00:44:14 -0400 - -samba (2.2.0.final.a-1) unstable; urgency=high - - * New upstream version (contains security fix from DSA-065-1.) - Closes: #97241: samba 2.2.0 fails to process hostnames in - "hosts allow" config line. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - Closes: #98365: addtosmbpass is missing from 2.2.0.final-2. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Sun, 24 Jun 2001 11:11:59 -0400 - -samba (2.2.0.final-2) unstable; urgency=low - - * Added libcupsys2-dev to Build-Depends. - * Samba depends now (again) on netbase so update-inetd is always - available for the Samba maintainer scripts. - Closes: #86063: Fails to uninstall if inetd is not installed. - * Updated source/config.{sub,guess} so ARM built doesn't fail. - Closes: #94480: config.sub out of date; can't build on arm. - Closes: #85801: config.sub/guess out of date. - * Not using brace expansion, i.e. {foo,bar} in any of the maintainers - scripts nor in debian/rules. - Closes: #88007: samba postrm has is not POSIX sh compliant. - - -- Eloy A. Paris <peloy@debian.org> Sat, 21 Apr 2001 17:27:18 -0400 - -samba (2.2.0.final-1) unstable; urgency=low - - * New upstream release. Lots of new things. See WHATSNEW.txt. - * Goofy version number because of my stupidity when assigning version - numbers to the CVS packages I have been uploading to experimental. - Will be fixed when 2.2.1 is released. I've no doubts a 2.2.1 release - will follow soon. - - -- Eloy A. Paris <peloy@debian.org> Tue, 17 Apr 2001 22:58:14 -0400 - -samba (2.2.0.cvs20010416-1) experimental; urgency=low - - * CVS update. - - -- Eloy A. Paris <peloy@debian.org> Mon, 16 Apr 2001 21:25:15 -0400 - -samba (2.2.0.cvs20010410-1) experimental; urgency=low - - * CVS update. - * Added libreadline4-dev to Build-Depends. - - -- Eloy A. Paris <peloy@debian.org> Tue, 10 Apr 2001 16:53:45 -0400 - -samba (2.2.0.cvs20010407-1) experimental; urgency=low - - * CVS update. Includes what is in 2.2.0alpha3. - - -- Eloy A. Paris <peloy@debian.org> Sat, 7 Apr 2001 16:00:33 -0400 - -samba (2.2.0.cvs20010316-1) experimental; urgency=low - - * Started working on Samba 2.2.0. Using the SAMBA_2_2_0 branch - from Samba CVS. - * Not compiling rpctorture as it has compile errors. Change in - debian/rules. - * Removed Linux kernel 2.0.x and smbfs compatibility baggage. Now - the smbfs does not support 2.0.x kernels; a kernel > 2.2.x is - needed to use smbfs. Updated debian/control, debian/rules and - README.Debian to reflect this change. - * Added to swat a versioned dependency on samba (so a user is forced to - install a new version of swat each time a new version of samba is - installed.) - - -- Eloy A. Paris <peloy@debian.org> Sun, 18 Mar 2001 14:21:14 -0500 - -samba (2.0.7-5) unstable; urgency=medium - - * Transition from suidmanager to dpkg-statoverride. - - -- Eloy A. Paris <peloy@debian.org> Thu, 18 Jan 2001 23:51:56 -0500 - -samba (2.0.7-4) unstable; urgency=medium - - * Applied Urban Widmark <urban@teststation.com> fixes to smbmount. Urban - is the maintainer of the smbfs in the kernel and of the userland - utilities. - * Links to HTML documents are correct now. - Closes: #69439: swat: Broken help file symlinks - Closes: #72615: samba-doc directory changed: removed htmldocs from path - Closes: #75847: swat: Wrong symlink - Closes: #66857: Wrong links to html documents. - Closes: #77912: misplaced documentation symlinks for swat - * Building Samba with CUPS support. For this I reverted the change to - source/configure.in that I did in 2.0.7-3 and re-ran autoconf. - Closes: #59038: samba: not compiled with cups support. - * Fix against previous known/unknown user time difference patch to swat - (make username / password lookups take the same time.) Remove CGI - logging code in Swat. - Closes: #76341 - Security holes in swat - * Updated Build-depends. - * Updated debian/copyright to refer to the correct location of the GPL. - * debian/rules: changed DESTDIR to `pwd`/debian/samba (was - `pwd`/debian/tmp.) - * debian/rules: added '--sourcedir=debian/samba' to dh_movefiles (for some - strange reason dh_installdirs is not creating debian/tmp/ so I needed - to tweak everything to install stuff in debian/samba rather than in - debian/tmp.) - * debian/control: changed section of samba-docs to 'doc' (was 'docs') - * Using relative symlinks in /usr/share/samba/swat/ (changed debian/rules - and source/scripts/installswat.sh.) - * Fixed (by tweaking debian/rules) - /usr/bin/{smbmnt,smbumount-2.*,smbmount-2.*} to be suid. - * Added "Provides: samba-client" to smbclient's section in control. - Closes: #71143: smbclient: Smbclient should provide samba-client. - * Fix for desired_access being zero in map_share_mode() (patch to - source/smbd/nttrans.c.) Thanks to Gary Wilson - <wilsong@sergievsky.cpmc.columbia.edu> for bringing this patch to my - attention. - * Hacked source/lib/util_sec.c so smbd works fine in both 2.0.x and - 2.2.x kernels even when the build is done in a system running - a 2.2.x kernel. - Closes: #78858: samba-common: samba2.0.7 needs kernel 2.2.x but - doesnt depend on it. - Closes: #72758: README.Debian should comment on 2.0.x kernels. - Closes: #56935: Samba 2.0.6 and Kernel 2.0.x. - Closes: #58126: Samba 2.0.6 and Kernel 2.0.x -- more info. - Closes: #60580: samba: failed to set gid. - Closes: #64280: Samba panics, can't set gid. - Closes: #66816: Must deal with brokenness under 2.0.x. - Closes: #67682: potatoe samba 2.0.7-3 out of order, 2.0.5a-1 OK. - Closes: #69735: PANIC: failed to set gid - Closes: #66122: "smbclient -L localhost -U%" returns with "tree - connect failed: code 0". - Closes: #57637: Samba says tree connect error. - Closes: #58015: potato samba wins support is broken. - * Fixed comments in sample smb.conf to point to the correct location. - Closes: #69578: comments in smb.conf points to wrong path. - * Move codepages from /etc/samba/codepages/ to - /usr/share/samba/codepages/. - Closes: #63813: samba; codepages should go in /usr/lib. - * Moved /var/samba/ to /var/state/samba/. - Closes: #49011: samba package not FHS compliant. - * Hacked source/configure.in (and re-ran autoconf) so yp_get_default_domain() - is found. - Closes: #44558: netgroup support missing in samba 2.0.5a-1. - * /etc/init.d/samba was calling start-stop-daemon with both --pidfile and - --exec. Got rid of --exec so --pidfile works. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Jan 2001 00:15:57 -0500 - -samba (2.0.7-3) frozen unstable; urgency=high - - * Release manager: this closes a RC bug. - * Commented out the section in source/configure.in that auto-detects - CUPS support and then ran autoconf to generate a new configure - script. This was done to prevent machines that have libcupsys-dev - installed from detecting CUPS support and adding an unwanted - dependency on libcupsys. This way the whole printing system - won't break on upgrades. CUPS support should be added after - Potato is released. - Closes: #65185: samba-common: Upgrading removes printing system. - Closes: #64496: smbfs: smbfs on powerpc has a dependency on cupsys. - * Updated README.debian. - Closes: #64594: Old README.Debian in /usr/share/doc/samba. - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 Jun 2000 19:16:04 -0400 - -samba (2.0.7-2) frozen unstable; urgency=high - - * Release manager: this closes RC bug #63839 that prevents Samba - to be built from source. - * Fixed a stupid typo in debian/rules that was preventing Samba - to be built from source. - Closes: #63839: samba_2.0.7-1(frozen): build error (SAMBABOOK dir) - * I forgot to mention that O'Reilly's book "Using Samba" was donated - to the Open Source community. The book was included in Samba 2.0.7 - in HTML format and is part of the Debian Samba package since - Samba 2.0.7-1. - * In Samba 2.0.7-1, the "Using Samba" book and a number of HTML help - files were supposed to be provided in both the swat and the samba-doc - packages. This duplication was a waste of space. Starting with - Samba 2.0.7-2, swat recommends samba-doc and the book and the HTML - files are included only in samba-doc, and are accessed via symlinks - from within swat. - Closes: #58810: superfluous files in swat? - * Added a 'echo "."' to /etc/init.d/samba in the reload) section. - Closes: #63394: "echo ." missing in reload section of init.d script - * Fixed typo in docs/htmldocs/using_samba/ch06_05.html. - Closes: #64344: typo "encrypted passwords" - * Cleaned up samba's postrm script so important common files aren't - deleted when samba is purged. Created a samba-common.postrm script. - Closes: #62675: purging samba removes /etc/samba/smb.conf. - Closes: #63386: samba --purge removes /etc/samba dir even though - smbclient/smbfs/samba-common packages are still installed - - -- Eloy A. Paris <peloy@debian.org> Wed, 3 May 2000 02:42:07 -0400 - -samba (2.0.7-1) frozen unstable; urgency=low - - * New upstream version. Dear Release Manager: please allow this - package to go to frozen as it contains fixes to a _lot_ of problems. - You can take a look at all the problems fixed by this release in - the official upstream announcement at - http://us1.samba.org/samba/whatsnew/samba-2.0.7.html. - * Added --with-utmp to add utmp support to smbd (this is new in Samba - 2.0.7) - * Closes: #62148 - samba not rotating filled logs. - * Closes: #56711: Samba doesn't manage well long share name (please note - that it's possible to connect to shares with names longer than - 14 characters but the share will be listed with a name truncated to - 13 characters.) - * Closes: #51752 - NT DOMAIN - NET USE * /HOME not mapping (error 67). - Closes: #50907 - logon path not working. - This is not a bug, it's just Samba doing the same thing an NT server - does. See WHATSNEW.txt and smb.conf's man page for details. - * Closes: #48497 - error executing smbsh in debian-potato. (smbwrapper - is not supported anymore.) - * Closes: #58994 swat: typo in swat description. - * Closes: #45931 - Samba dies with SIGILL on startup. (Hardware - problems, person that reported the bug never came back.) - Closes: #54398 - smbadduser fails, looks for ypcat. - * Fixed swat's man page to include Debian specific installation - instructions. There's not necessary to edit /etc/services or - /etc/inetd.conf. - (Closes: #58616 - incomplete install config && incorrect installation - instructions.) - * s/SBINDIR/\"/usr/sbin\"/g in source/web/startstop.c to prevent swat - to look for smbd and nmbd in the wrong place when requested to start or - stop smbd or nmbd. - (Closes: #55028 - swat can't start samba servers.) - * Closes: #37274: smbclient does not honour pot. (Tested and seems to be - working now.) - * Not confirmed, but should fix #56699, #62185, #56247, #52218, #43492, - #50479, #39818, #54383, #59411. - (please re-open any of this if the problem still exists - I was unable - to confirm any of this because I could never reproduce them.) - Closes: #56699 - Samba's nmbd causes random kernel oops several - times in a row. - Closes: #62185 - nmbd's forking until no more file descriptors are - available. - Closes: #56247 - session setup failed: ERRSRV - ERRbadpw. - Closes: #52218 - Either wins proxy does not work, or I don't understand - it. - Closes: #43492 - intermittent problem changing password. - Closes: #50479 - Can't access windows 2000 shares with samba. - Closes: #39818 - samba-common: Upgrading Samba from the Slink version. - Closes: #54383 - samba-common: Missing /etc/smb.conf. - Closes: #59411 - smbclient: cannot browse Win2k shares. - - -- Eloy A. Paris <peloy@debian.org> Thu, 27 Apr 2000 16:07:45 -0400 - -samba (2.0.6-5) frozen unstable; urgency=low - - * Oppsss! samba-common doesn't depend on libcupsys1 so the binaries - in this package are broken unless libcupsys1 is installed. - samba-common has a "grave" bug because of this. Instead of adding - libcupsys1 to the Depends: list of each package in debian/control - I investigated why dh_shlibs was not picking the dependency - automatically. It turns out that it's probably a bug in libcupsys1 - because the format of its shlibs file is not correct. I fixed that - file (/var/lib/dpkg/info/libcupsys1.shlibs) and now dependencies are - picked correctly. I'll talk to the libcupsys1 maintainer. - - I think the addition of CUPS support to Samba is a big change that - should not go into Frozen. So, I decided to back up the addition - of CUPS support I did in 2.0.6-4 to minimize problems. I'll add - CUPS support again when I start working on Samba for Woody. - (Closes: #59337 - samba-common has a missing dependency) - - -- Eloy A. Paris <peloy@debian.org> Wed, 1 Mar 2000 08:40:02 -0500 - -samba (2.0.6-4) frozen unstable; urgency=low - - * It seems that sometimes nmbd or smbd are not killed when upgrading. - I think it is because in samba's prerm script I was calling - start-stop-daemon with the --pidfile switch and in old versions of - Samba the nmbd and smbd daemons did not store their PIDs in a file in - /var/samba/. I changed debian/samba.prerm so the existence of the - PID files is checked before calling "start-stop-daemon --pidfile ..." - If the PID files do not exist then start-stop-daemon is called - without the --pidfile parameter. - (Closes: #58058 - upgrade from slink went badly) - * Fixed typo in description of swat package in debian/control. - * Installed libcupsys1-dev so the configure script picks up CUPS - and Samba is compiled with CUPS support. Also added libcupsys1 to - the Depends: list of package samba in debian/control. - (Closes: #59038 - samba not compiled with cups support) - * Added a small paragraph to debian/README.debian warning about possible - problems with the WINS code in Samba 2.0.6. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Feb 2000 14:00:42 -0500 - -samba (2.0.6-3) frozen unstable; urgency=low - - * Applied patch posted by Jeremy Allison to the samba mailing list - that should take care of the internal errors reported in bug #52698 - (release-critical). Wichert: please test as I never could reproduce - it here. - (Closes: #52698 - samba gets interbal errors) - * Moved samba-docs to the 'docs' section. - (Closes: #51077 - samba-doc: wrong section) - * Added reload capability to /etc/init.d/samba (only for smbd because - nmbd does not support reloading after receiving a signal). - (Closes: #50954 - patch to add reload support to /etc/init.d/samba) - * Corrected "passwd chat" parameter in sample /etc/samba/smb.conf so - Unix password syncronization works with the passwd program currently - in Potato. Thanks to Augustin Luton <aluton@hybrigenics.fr> for - the correct chat script. - * Stole source/lib/util_sec.c from the CVS tree of what will become - Samba 2.0.7 or whatever so we can use the same binaries under - both 2.0.x and 2.2.x kernels. - (Closes: #51331 - PANIC: failed to set gid) - * smbadduser is now provided as an example and it's customized for Debian. - I am not providing this script in /usr/sbin/ because then I would need - a dependency on csh, something that I don't want to do. - (Closes: #51697, #54052) - * Fixed the short description of the smbfs package in debian/control. - (Closes: 53534 - one-line description out of date). - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Nov 1999 16:32:12 -0500 - -samba (2.0.6-2) unstable; urgency=low - - * samba-common now depends on libpam-modules (not on libpam-pwdb, which - I have been told is obsolete). I modified /etc/pam.d/samba accordingly - to reflect the change. - (Closes: Bug#50722: pam pwdb dependence?). - * The old /etc/pam.d/samba file which had references to pam_pwdb caused - smbd to die with a signal 11. The new /etc/pam.d/samba file fixes - this problem. - (Closes: #50876, #50838, #50698) - * Compiled with syslog support (use at your own risk: syslog support - is still experimental in Samba). I added the parameters "syslog = 0" - and "syslog only = no" to the sample smb.conf to avoid pestering - users that do not want Samba to log through syslog. - (Closes: Bug#50703 - syslog only option doesn't work) - * Removed the stupid code in the smbmount wrapper script that tries - to load the smbfs module if smbfs is not listed in /proc/filesystems. - (Closes: Bug#50759 - Non-root can't run smbmount if SMBFS is compiled - as a module in the kernel) - * Added /bin/mount.smb as a symlink pointing to /usr/bin/smbmount so - 'mount -t smb ...' works just as 'mount -t smbfs ...'. - (Closes: Bug#50763 - 'mount -t smb' doesn't work) - - -- Eloy A. Paris <peloy@debian.org> Sat, 20 Nov 1999 18:53:35 -0500 - -samba (2.0.6-1) unstable; urgency=low - - * Samba 2.0.6 has been released. This is the first try of the Debian - Samba packages. I know for sure that smbd won't work properly on - 2.0.x kernels because the patch that Wichert sent me does not apply - to the new source/lib/util_sec.c in Samba 2.0.6. That file was - completely re-written by Tridge. - * Updated README.Debian. - * A new client utility called smbspool appeared in Samba 2.0.6. I added - this utility to the smbclient package, although I haven't tried it yet. - * Added the symlink /sbin/mount.smbfs that points to /usr/bin/smbmount. - This is to be able to type "mouont -t smbfs ...". This symlink goes - in the smbfs package, of course. - * This new release should close the following bugs (some of these - are fixed for sure in this new upstream release, some others I could - not reproduce but I believe they are fixed if they were real bugs. - As always, please feel free to re-open the bugs if the problem is not - solved). - Closes: Bug#33240: icmp mask needs a bug workaround. - Closes: Bug#37692: samba: Has problems detecting interfaces. - Closes: Bug#38988: samba: Truly bizzare behavour from nmbd. - Closes: Bug#46432: samba-2.0.5a-2: nmbd does not appear to broadcast - properly. - Closes: Bug#44131: smbfs: no longer possible to set file and - directory-modes. - Closes: Bug#46992: smbmount-2.2.x manpage wrong. - Closes: Bug#42335: smbfs: missing options from the new 2.2.x commandline. - Closes: Bug#46605: smbmnt segfaults. - Closes: Bug#48186: smbmount. - Closes: Bug#38040: smbfs: Please add /sbin/mount.smb [included]. - Closes: Bug#47332: smbmount: could -f and -P be added back? - * Samba has been compiled with PAM support (closes: Bug#39512 - samba PAM - module). To succesfully add PAM support, I created /etc/pam.d/samba and - added this file as a conffile for the samba-common package. I also made - samba-common depend on libpam-pwdb. - * Added simple man pages for the wrapper scripts smbmount and smbmount. - (Closes: Bug#44705 - Missing smbmount man page) - * Installed libreadlineg2-dev in my system so smbclient now has a - "history" command and libreadline support :-) - * This time I did add a check to the smbmount wrapper script to see if - the kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. I mentioned in the changelog - for samba-2.0.5a-3 that I did this but I forgot at the end. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Nov 1999 12:08:15 -0500 - -samba (2.0.5a-5) unstable; urgency=low - - * I am sorry to report that the smbwrapper package is gone for the - moment. The reason for this is twofold: first of all, smbwrapper - is completely broken in Samba-2.0.5a (it compiles but it doesn't - run) and in the upcoming Samba-2.0.6 it doesn't even compile. Second, - when I asked Andrew Tridgell (father of Samba) about the state of - smbwrapper he told me that Ulrich Drepper (head of the glibc project) - broke on purpose the glibc stuff in which smbwrapper is based. - Consequently, Tridge recommended me to compile Samba without - support for smbwrapper. When, I have no idea. Sorry folks. Here is - the original message I received from Andrew: - - > 1) 2.0.5a's smbwrapper doesn't work under glibc2.1, and pre-2.0.6's - > smbwrapper doesn't even compile under glibc2.1. - - yep, Ulrich deliberately broke it. It won't get fixed till glibc - allows the sorts of games it plays to work again. I suggest you turn - it off in your build scripts until that gets sorted out. - - * Swat's file are now in /usr/share/samba/ instead of - /usr/lib/samba/ (bug #49011). - * Man pages now in /usr/share/man/ instead of /usr/man/ (bug #49011). - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Nov 1999 12:59:13 -0500 - -samba (2.0.5a-4) unstable; urgency=low - - * Applied patch from our fearless leader (Wichert) to fix the darn bug - that prevents Samba to work on 2.0.x kernels if it was compiled - in a system running a 2.2.x kernel. This closes #40645 (build uses - setresuid which doesn't work under 2.0.34 (does apparently under - 2.2.x) ). - * Fixed the entry that swat's postinst script adds to /etc/inetd.conf - so it is '#<off># swat\t\tstream\ttcp\tnowait.400 ...' instead of - '#<off>#swat\t\tstream\ttcp\tnowait.400 ...'. The old way caused - 'update-inetd --enable swat' to leave the entry for swat disabled. - Thanks to Dave Burchell <burchell@inetnebr.com> for finding out - this problem. This closes #48762 (swat uses non-standard syntax to - comment out inetd.conf entry). - * /usr/sbin/swat does not think anymore that the smbd daemon lives - in /usr/local/samba/bin/. To fix this I am running now source/configure - with "--prefix=/usr --exec-prefix=/usr". This closes #47716 (samba - 'swat' fails: incorrect hardwired path in the binary). - - -- Eloy A. Paris <peloy@debian.org> Sun, 31 Oct 1999 03:42:38 -0500 - -samba (2.0.5a-3) unstable; urgency=low - - * I am pretty darn busy with my MBA, I apologize for the long time it's - taking to squash bugs in the Samba packages. - * Built with debhelper v2 for FHS compliancy. Changed a couple of - things in debian/rules to accomodate for the new place for the docs. - I also had to change debian/{samba.postinst,samba.prerm,swat.postinst} - to make sure that the symlink from /usr/doc/xxx exists and points to - /usr/share/doc/xxx (the reason for this is that I am not letting - debhelper to create these scripts for me automatically). - * Built with latest libc6. - * smbfs: finally, the nasty bug that causes smbmount to die after - a while is gone thanks to Ben Tilly <Ben_Tilly@trepp.com>. - The problem was just a typo in source/client/smbmount.c. - This closes grave bug #42764 (smbmount dies) and #43341 - (smbfs-2.2.x won't function after a while). - * Fixed the smbmount wrapper script to eliminate a bashism (closes - #45202 - "wrapper scripts use $* instead of "$@") and to recognize - 2.3.x and 2.4.x kernels (closes #47688 - "smbfs: does not recognize - kernel 2.3.x"). - * Added a check to the smbmount wrapper script to see if the - kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. - * swat's man page is now part of the swat package, not of the samba - package. This closes #44808 (Samba has a man page for swat, but - the binary is not included). - * The interface program smbrun is not longer needed by smbd because - of the availability of execl() under Linux. Because of this, the - smbrun is not even being compiled. Since there is no need for smbrun - now, the smbrun man page was taken out of the samba package. This - closes #45266 (/usr/bin/smbrun missing). - * smbpasswd is now part of the samba-common package, and not part of - the samba package. This is to let administrators that do not want - to install a full Samba server administer passwords in remote - machines. This closes bug #42624 (smbpasswd should be included in - smbclient). This bug report also suggests that swat becomes part of - the samba package, that smbfs becomes part of the smbclient package, - and that the binary smbpasswd becomes part of the smbclient package. - I moved smbpasswd to the samba-common package but I am reluctant to - do the other things the bug report suggests. - * In order to keep dpkg happy when moving smbpasswd from the samba - package to samba-common, I had to add a "Replaces: samba (<= 2.0.5a-2)" - in the control section of the samba-common package and a - "Replaces: samba-common (<= 2.0.5a-2)" in the control section of the - samba package (in debian.control). - * Samba is now being compiled with the "--with-netatalk" option. This - closes #47480 (Could samba be compiled with the --with-netatalk option). - * All packages that depend on samba-common have a versioned dependency - now. This was accomplished by adding "(= ${Source-Version})" to the - relevant sections of debian/control. Thanks t Antti-Juhani Kaijanaho - <gaia@iki.fi> for the hint. This closes #42985 (samba should probably - have a versioned depends on samba-common). - * Made sure the file docs/textdocs/DIAGNOSIS.txt gets installed in all - the Samba packages. This closes bug #42049 (no DIAGNOSTICS.txt file). - * Added the smbadduser helper script to the samba package. This closes - #44480 (Samba doesn't come with the smbadduser program). - * Applied patch from szasz@triton.sch.bme.hu that prevents smbmount - to leave an entry in /etc/mtab for a share that could not be mounted - because of invalid user of password. The patch also allows smbumount - to unmount the share in the event that something goes wrong with the - smbmount process. This closes bug #48613 (Mount/umount problems + - patch) as well as #44130 (failed mount is still mounted). - * smbmount-2.2.x is now setuid root. This is needed for the patch - applied above to be effective. If smbmount-2.2.x is not setuid root - then an entry will be left in /etc/mtab even when the mount - fails. I had to add "usr/bin/smbmount-2.2.x" to debian/smbfs.suid - for this to work. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Oct 1999 10:36:13 -0400 - -samba (2.0.5a-2) unstable; urgency=low - - * This version is basically the same as 2.0.5a-1 but it was compiled - on a Potato system with glibc2.1. See below the change log for 2.0.5a-1 - for more information. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:25:29 -0400 - -samba (2.0.5a-1) stable; urgency=high - - * I'm back from the Honey Moon. We are pretty busy because we are moving - to Pittsburgh (from Caracas, Venezuela) in aprox. 24 hours and we still - have plenty of things to pack and to do. Samba 2.0.5 was released - while I was in the Honey Moon and it is just now (almost 3 AM) when - I have time to package it. - * Because of the security problems fixed in 2.0.5, this upload goes - to both stable and unstable (the Security Team asked for this). - * This release (2.0.5a-1) was compiled on a Slink system. 2.0.5a-2 will - be compiled on a Potato system. - * Added a "Replaces: samba (<= 1.9.18p10-7)" to the samba-common - section in debian/control (as suggested by Steve Haslam - <araqnid@debian.org>) to fix the problems that appear when upgrading - from the Samba package in Slink. Please test this as I am completely - unable to do so. This should fix bug #39818 (Upgrading Samba from the - Slink version). - * Removed the hacks to the autoconf stuff that I added to 2.0.4b-2 in - order to have defined several socket options when compiling with - Linux 2.2.x kernel headers - the fix is now upstream. - * Finally!!! smbmount was re-written (thanks Tridge :-) to use a command - line syntax similar to the one used by the old smbmount (for 2.0.x - kernels). This means that the wrapper script is no longer necessary - so I removed it. In its place there is a simple wrapper script that - calls smbmount-2.0.x or smbmount-2.2.x depending on the kernel that is - running. - * Because of the wedding, the Honey Moon, and our move to Pittsburgh, - I can't work on fixing other bugs in this release. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:18:51 -0400 - -samba (2.0.4b-3) unstable; urgency=low - - * Stupid mistake: I forgot to add /usr/bin/smbumount to debian/smbfs.files - and because of this /usr/bin/smbumount was part of the samba package - instead of part of the smbfs package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Jul 1999 01:51:24 -0400 - -samba (2.0.4b-2) unstable; urgency=low - - * Dark (and archive maintainers): please remove from Potato the smbfsx - binary package and also the old source package for smbfs. smbfs and - smbfsx have been merged starting with this version. - * Merged the old smbfs package with Samba. Now there is only one package - for the smbfs utilities and is called "smbfs". The package smbfsx - does not exist any more and this new smbfs package must be used - for both 2.0.x and > 2.1.x kernels. - * A wrapper script was added to handle the syntax change in smbmount - in the new smbfs utilities (required for kernels > 2.1.70). The - home page for this script is http://www.wittsend.com/mhw/smbmount.html. - Please _note_ that this will change (for good) in Samba 2.0.5 :-) - * Added debian/smbumount.sh. It's another wrapper that calls smbumount-2.2.x - or smbumount-2.0.x depending on the kernel currently running. - * Not using -t for savelog in cron.weekly script. - * Recompiled without libreadlineg-dev (Samba does not seem to be using - it so unnecessary dependencies are produced). - * glibc2.1 build. - * Removed smbpasswd.8 man page from the debian/ directory because it is - now being provided upstream. - * Got rid of the ugly hack I put in source/lib/util_sock.c to have - IPTOS_LOWDELAY and IPTOS_THROUGHPUT defined. Now I patched the - autoconf stuff to #include <netinet/ip.h>. I've sent the patch to - Jeremy Allison so we have this upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Jun 1999 17:47:19 -0400 - -samba (2.0.4b-1) unstable; urgency=low - - * New upstream release. This release fixes the following Debian bugs: - #33838 (Amanda/ Samba 2.0.2 and backing up large filesystems) and - #33867 (Amanda 2.4.1 and Samba 2.0.2 and large filesystems). Jeremy - Allison released Samba 2.0.4 and found out that there were a couple - of minor bugs so he released 2.0.4a. Then he found out about more - serious bugs and released 2.0.4b. I have built this package several - times between yesterday and today because of this. Now I am releasing - the Debian packages for Samba with what I believe will be the latest - release the Samba Team will make at least in the next 4 days (Jeremy - is taking a short vacation). - * Still compiling against glibc2.0 (sorry about that :-) - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. It looks - now in /usr/lib/samba/ for this file. This fixes #32971, #32989, - #33278, #34911 and #36317. - * Made smbfsx depend on samba-common because smbfsx uses /etc/samba/smb.conf - and /etc/samba/codepages/. This fixes #33128 (smbmount complains about - missing /etc/smb.conf). - * Package swat does not depend on httpd anymore (there's no need to). - This fixes #35795 (swat requires httpd). - * Renamed smbmount-2.1.x and smbumount-2.1.x to smbmount-2.2.x and - smbumount-2.2.x. Same applies to the man pages. - * Changed minor type in smbmount's man page (changed "\"" by "\'"). This - fixes #34070 (wrong quotes in manpage). - * Used Fabrizio Polacco's <fpolacco@icenet.fi> procedure to create the - Debian package for Samba. This closes #35781 (samba has no pristine - source). - * Changes to /etc/cron.weely/samba: rotate /var/log/{nmb,smb}.old only - if the size of either is different than 0. Also, added comments at the - beginning of this script to explain how rotation of log files works in - Samba. Thanks to ujr@physik.phy.tu-dresden.de (Ulf Jaenicke-Roessler) - for the suggestions. This closes #37490 (cron.weekly script rotates not - used [sn]mb.old files). As I side effect, this should also close - #31462 (still trouble with /etc/cron.weekly/samba). - * Check for old /etc/pam.d/samba file which is not provided by this version - of the Debian Samba package but was provided in older versions. If this - file exists we delete it. We check for this in the postinst. This closes - #37356 (samba put stuff in pam.d that pam complains about) and #34312 - (libpam0g: questions during upgrade). - * Make sure the mode of /etc/samba/smbpasswd is set to 600. This is done - in the postinst script. This closes #35730 (Security problem with - /etc/samba/smbpasswd when upgrading from samba 1.9.18p8-2 to 2.0.3-1). - * I have just checked and it looks like #28748 (smbfsx doesn't "return ") - has been fixed. This might have been fixed since a long time ago. - * Long long standing bug #18488 (smbclient: internal tar is broken) is - closed in this release of Samba. The bug might have been closed for a - long long time, but I did not check for this before. - * Temporary fix to the annoying "Unknown socket option IPTOS_LOWDELAY" - message. This fixes #33698 (socket option IPTOS_LOWDELAY no longer works), - #34148 (warnings from smbd) and #35333 (samba warnings). - - -- Eloy A. Paris <peloy@debian.org> Thu, 20 May 1999 00:35:57 -0400 - -samba (2.0.3-1) unstable; urgency=low - - * New upstream version. - * Removed the convert_smbpasswd.pl program I created and put in - /usr/doc/samba/ because there's a convert_smbpasswd script in the - upstream sources that does the same thing. I modified the postinst - script to use this script instead of the one I created. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Feb 1999 01:35:37 -0400 - -samba (2.0.2-2) unstable; urgency=low - - * Updated the README.Debian file. - * Updated the description of the samba package in the control file. - * The binaries smbmnt and smbumount-2.1.x in the smbfsx package are now - installed setuid root as they should be. This was done by doing a - a "chmod u+s" for each binary in debian/rules and by creating the - file debian/smbfsx.suid. - * Minor patch to source/client/smbumount.c to allow normal users - to umount what they have mounted (problem was a kernel vs. libc6 - size mismatch). I sent the patch upstream. - * Created debian/smbwrapper.dirs so the directory /usr/lib/samba/ is - created. - * Modified debian/rules to move smbwrapper.so from debian/tmp/usr/bin/ to - debian/smbwrapper/usr/lib/samba/. - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 18:11:34 -0400 - -samba (2.0.2-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 01:35:51 -0400 - -samba (2.0.1-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 6 Feb 1999 06:51:18 -0400 - -samba (2.0.0final-4) unstable; urgency=low - - * The samba postinst made an unwarranted assumption that the file - /etc/samba/smbpasswd exists. If the file did not exist (which is - perfectly valid) the postinst will fail. This fixes #32953. - - -- Eloy A. Paris <peloy@debian.org> Fri, 5 Feb 1999 23:32:46 -0400 - -samba (2.0.0final-3) unstable; urgency=low - - * Added to debian/control a "Depends: ${shlibs:Depends}" line for the - samba-common package so dependencies for this package are set - correctly (thanks to Dark for pointing this out). - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Feb 1999 09:45:21 -0400 - -samba (2.0.0final-2) unstable; urgency=low - - * Finally!!! The first upload to unstable. Sorry for the delay folks - but I have been quite busy lately :-) Another reason for the delay - is that I wanted to ease the migration from Samba 1.9.18p10 and - before to Samba 2.0.0. I changed the location of the config. files - from /etc/ to /etc/samba/ and this made things a little bit harder. - * This package needs 2.2 kernel headers to compile (well, this is - true for the smbfsx package, all others compile fine with 2.0 kernel - headers). - * Created a preinst script for the samba package to take care of the - location migration of smb.conf (from /etc/ to /etc/samba/). The - preinst script also takes care of moving /etc/smbpasswd to its new - location (/etc/samba/). - * Created postinst and postrm scripts to add/remove an entry for swat - in /etc/inetd.conf. - * I had forgotten to install the sambaconfig script so I changed - debian/rules to install this script. - * Added a postrm script for the samba package (I had forgotten to add - this script to the new Samba packages after the migration from 1.9.18 - to 2.0.0). - * Created a small Perl script that is called from the samba postinst - to convert the smbpasswd from the old format used in version prior - to 2.0.0 to the new one used in 2.0.0 and beyond. - * The upgrade process should be automatically now. Please let me know - of any problems you encounter. - - -- Eloy A. Paris <peloy@debian.org> Sat, 23 Jan 1999 09:34:10 -0400 - -samba (2.0.0final-1) experimental; urgency=low - - * Finally!!! Samba 2.0.0 is here! I am not uploading to unstable - because I still have to work out the migration from the old - samba packages to the new ones. I also need to work more on the - new swat package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Jan 1999 22:40:02 -0400 - -samba (2.0.0beta5-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Jan 1999 00:37:57 -0400 - -samba (2.0.0beta4-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Wed, 23 Dec 1998 18:37:45 -0400 - -samba (2.0.0beta3-1) experimental; urgency=low - - * New upstream version. - * I have just realized that the documentation patches (for man pages) - that I used for the 1.9.18 release are not longer necessary because - there was a major re-write of all the Samba documentation that added - the missing bits of information. So, I have just removed these minor - patches. - - -- Eloy A. Paris <peloy@debian.org> Tue, 8 Dec 1998 12:00:30 -0400 - -samba (2.0.0beta2-1) experimental; urgency=low - - * New upstream version. - * This new version fixes the potential security problem that - was posted to debian-private (using the "message command" parameter - to execute arbitrary commands from messages sent from LinPopUp). - * Changed /etc/init.d/samba to use one of the variables stored in - /etc/samba/debian_config to know how Samba is being run (from inetd or - as daemons) instead of grepping /etc/inetd.conf which may not exist - if the user is running xinetd (this fixes bug #29687 - assumes using - vanilla inetd) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Nov 1998 23:32:03 -0400 - -samba (2.0.0beta1-1) experimental; urgency=low - - * First beta release of the samba-2.0.0 code. Before the beta I was - working with sources downloaded directly from the CVS server. This - package goes into experimental and I plan to release the new - samba to unstable as soon as it gets out of beta. - * Created several packages out of the Samba sources. They are: - samba (nmbd and smbd daemons + related programs), smbclient (FTP - like command line utility to retrieve files from SMB servers), - swat (Samba Web Administration Tool), samba-common (common files - used by samba, smbclient and swat), smbfsx (smbfs utilities for - kernels >= 2.1.70), smbwrapper and samba-doc (Samba documentation). - * Refreshed debian/samba-doc.docs so recently added docs. are - installed in the samba-doc package. New additions include man - pages in the /usr/doc/samba-doc/htmldocs/ directory. - * Deleted Debian specific nmblookup(1) man page as it is now upstream. - * Added smbtorture to smbclient package. - * Moved rpcclient from the samba package to the smbclient package. - * The Samba daemons (nmbd and smbd) now create a PID file so I changed - all calls to start-stop-daemon to use the PID file. - * Fixed debian/rules to install mksmbpasswd (fixes #27655). - * Modified /etc/init.d/samba so nmbd is started without the -a (append - to the log file instead of overwrite) switch. The new behavior of - nmbd is to NOT overwrite log files, so the -a switch can be deleted - safely. - * Moved from debstd to debhelper. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Oct 1998 08:37:41 -0400 - -samba (1.9.18p10-5) frozen unstable; urgency=high - - * Oppsss!!! While fixing bug #26884 I introduced a bug even worse than - the one I was trying to fix: in /etc/init.d/samba I got rid of the test - that tells us whether the Samba daemons are running from inetd or as - standalone daemons. I corrected the problem by editing again - /etc/init.d/samba to uncomment the test. - * Wishlist bug #28298 (typos in samba) was fixed. - * Wishlist bug #28309 (typos in smb.conf) was fixed. - - -- Eloy A. Paris <peloy@debian.org> Wed, 28 Oct 1998 09:11:47 -0400 - -samba (1.9.18p10-4) unstable; urgency=low - - * Minor patch to debian/rules to delete *substvars instead of only - substvars when doing a "debian/rules clean" (thanks to Daniel Jacobowitz - <dmj@andrew.cmu.edu> for this). - * Small patch to source/shmem_sysv.c that eases compilation under - glibc-2.1 (thanks to Daniel <dmj@andrew.cmu.edu> for this). - - -- Eloy A. Paris <peloy@debian.org> Thu, 17 Sep 1998 15:33:49 -0400 - -samba (1.9.18p10-3) unstable; urgency=low - - * Patched smbclient again to fix minor formatting problem introduced - by Magosanyi Arpad's smbclient patch. - - -- Eloy A. Paris <peloy@debian.org> Thu, 3 Sep 1998 11:03:23 -0400 - -samba (1.9.18p10-2) unstable; urgency=low - - * Sync'ed include files for the smbfs utilities with the ones in - kernel 2.1.119. - * Added to the /usr/doc/samba/examples/ directory a new script called - wins2dns (courtesy of Jason Gunthorpe <jgg@deltatee.com>) that - generates BIND sonze files for hosts in the WINS database. - * Patched smbclient to include enhancements by Magosanyi Arpad - <mag@bunuel.tii.matav.hu> that make scripting easier. - - -- Eloy A. Paris <peloy@debian.org> Fri, 28 Aug 1998 13:34:54 -0400 - -samba (1.9.18p10-1) stable unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). I built a 1.9.18p9-1 but I - never released it because an obscure bug was found just a couple - of days before the official release, so the Samba Team stopped - the rollover of 1.9.18p9. - * Updated documentation (new files were added to the docs/ directory - that were not installed in /usr/doc/samba/). - * Fixed long standing bug #7695 (smb.conf's man page doesn't document - 'printing=lprng') - I made a couple of changes to the man page to - include references to lprng. - * Fixes bug #24930 (samba needs to suggest psmisc?). I don't think it - is necessary to make samba suggest psmisc just because the postinst - script mentions to call killall. So, I removed all references to - "killall" in the scripts. - * Fixes bug #25999 (Samba does not by default work with unix password - sync): I added the "passwd program" and "passwd chat" parameters to - the sample smb.conf to reflect the Debian environment. - - -- Eloy A. Paris <peloy@debian.org> Fri, 21 Aug 1998 08:59:18 -0400 - -samba (1.9.18p9-1) unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). - * Removed Jeremy Allison's patch applied to 1.9.18p8-2 because it is - now part of the new upstream version. - * Corrected small typo in addtosmbpass' man page (fixes #25629). - - -- Eloy A. Paris <peloy@debian.org> Tue, 11 Aug 1998 08:53:08 -0400 - -samba (1.9.18p8-2) frozen unstable; urgency=medium - - * Applied patch received from Jeremy Allison (Samba Team) that fixes - "grave" bug #23903 (samba maps username before authenicating with - NT password server). - * Added a "sleep 2" between "start-stop-daemon --stop" and - "start-stop-daemon --start" in /etc/init.d/samba so when this script - is called with the "restart" parameter the Samba daemons are restarted - properly. This fixes bug #24211 (init.d script doesn't restart). - * Sent start-stop-daemon output in /etc/init.d/samba to /dev/null to - avoid annoying warning messages. - * Added perfomance tune parameters to sample /etc/smb.conf (SO_SNDBUF=4096 - and SO_RCVBUF=4096 to "socket options" in /etc/smb.conf). I can't - find who sent this suggestion to me. If you are listening, drop me a - note and I'll put your name here :-) - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Jun 1998 08:45:01 -0400 - -samba (1.9.18p8-1) frozen unstable; urgency=low - - * New upstream release that fixes _lots_ of "ugly" bugs. The list of - fixed bugs is too long to include here (see /usr/doc/samba/WHATSNEW.txt). - * Fixed postinst to quote arguments to if [ arg .. ] constructs - (fixes #22881). - * Applied Jeremy Allison's patch (posted to the samba-ntdom mailing - list) that solves a problem with username maps (the Samba Team did - not catch this problem before final 1.9.18p8). - * Made /etc/init.d/samba to print out a warning when Samba is running - from inetd and the user runs /etc/init.d/samba to start|stop|restart - Samba (there's no point on doing this because inetd will start the - daemons again when there is traffic on UDP port 137-139). - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Jun 1998 00:18:25 -0400 - -samba (1.9.18p7-4) frozen unstable; urgency=medium - - * Fixes the serious problem of having the WINS name server - database getting deleted at boot time. That happened because the - WINS database was being stored under /var/lock/samba/ and all files - under /var/lock/ are deleted at boot time. The place where the WINS - database is stored was moved to /var/samba/. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:24:29 -0400 - -samba (1.9.18p7-3) stable; urgency=high - - * Libc5 version for Bo (stable) that fixes the recently reported - security hole. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:19:33 -0400 - -samba (1.9.18p7-2) frozen unstable; urgency=low - - * Added patches from the non-mantainer upload that make us able - to compile Samba on Alpha systems. This fixes bug #22379. - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 20:38:51 -0400 - -samba (1.9.18p7-1) frozen unstable; urgency=low - - * New upstream release (just bug fixes, no new functionality). - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 11:47:32 -0400 - -samba (1.9.18p6-2) frozen unstable; urgency=low - - * Uploaded to frozen (I forgot to upload last version to frozen - so it got installed only in unstable). - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 May 1998 18:10:17 -0400 - -samba (1.9.18p6-1.1) unstable; urgency=low - - * non-maintainer upload for Alpha - * patch needed for source/quota.c (_syscall4() confusion) - - -- Paul Slootman <paul@debian.org> Tue, 12 May 1998 20:39:13 +0200 - -samba (1.9.18p6-1) unstable; urgency=low - - * New upstream release that fixes a possible buffer overflow. - This security hole was reported on BugTraq by Drago. The - previous Debian version (1.9.18p5-1) was not released because - 1.9.18p5 and 1.9.18p6 were released very closely. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 20:28:33 -0400 - -samba (1.9.18p5-1) unstable; urgency=low - - * New upstream release (no new funcionality, just bug fixes - see - /usr/doc/samba/WHATSNEW.txt.gz). - * Backed off Debian patches that were added upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 08:43:53 -0400 - -samba (1.9.18p4-2) frozen unstable; urgency=low - - * Patched smbclient(1) man page to not reference the unsopported - -A parameter (fixes #6863). - * Changes to start nmbd with the -a option (in /etc/init.d/samba - and in the entry added to /etc/inetd.conf). - * Fixed typo in sample smb.conf (fixes #21484). - * Fixed yet another typo in sample smb.conf (fixes #21447). - - -- Eloy A. Paris <peloy@debian.org> Fri, 17 Apr 1998 22:19:23 -0400 - -samba (1.9.18p4-1) frozen unstable; urgency=low - - * New upstream version that fixes several bugs. - * New scheme for keeping track of Debian specific configuration. - This new scheme fixes bug #18624 (Samba always asks the user about - configuration options). New scheme stores Debian specific - configuration information in /etc/samba/debian_config. - * Changes to /usr/sbin/sambaconfig, prerm and postinst to support the - new configuration scheme. - * Moved required kernel 2.1.x include files inside the source tree - so I don't have to do very nasty things like creating crazy - symlinks in /usr/include to make this package compile. This - allows non-root users to build the package and fixes bug - #20104. - * Fixed address of the FSF in /usr/doc/samba/copyright (problem - reported by lintian). - * The /etc/init.d/samba script now supports the force-reload - argument, as required by the policy (problem reported by lintian). - * Added a "rm /etc/cron.weekly/samba" at the end of the postinst. - * Now the samba package can be installed even if no nmbd or smbd processes - are running. This fixes the following bugs: #8917, #9334, #10268, - #10411, #11146 and #13387. - * Provides the original README in /usr/doc/samba. This fixes bug #9693. - * Added a --no-reload option to sambaconfig to not reload Samba - after configuration. - * Created man pages for sambaconfig(8), addtosmbpass(8), - mksmbpasswd(8) and nmblookup(1). - * Corrected small typo in sample /etc/smb.conf. - * Added two new parameters to /etc/smb.conf: "preserver case" and - "short preserve case". - * "rm -Rf /var/lock/samba" in postrm when package is being purged. - * Patched upstream source (nmbd.c) to not overwrite log files when - nmbd is called with the -a parameter (fixes #17704: nmbd ignores - -a option). - * /etc/init.d/samba now starts the nmbd daemon with the -a parameter - to not overwrite log files. - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Mar 1998 21:22:03 -0400 - -samba (1.9.18p3-1) unstable; urgency=low - - * New upstream version. - * Oppsss!!! I really screwed it up (actually, debstd did). - 1.9.18p2-2 still contained man pages (smbmount and smbumount) part - of other packages. This version does have this corrected. If not, - I no longer deserve to be a Debian developer! So, this version - fixes bug #18438 and some of the bugs I claimed to fix in - 1.9.18p2-2. Oh, by the way, I fixed the problem by running debstd - with -m in debian/rules (man pages are installed by "make install" - so it's a bad idea to re-install man pages with debstd). - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Feb 1998 17:32:42 -0400 - -samba (1.9.18p2-2) unstable; urgency=low - - * Fixes bugs #18017, #17999, #17961, #17932: old 1.9.18p2-1 provided - a man page for smbmount, which conflicts with package smbfs. This - was solved by creating a multi-binary package that produces - package samba and new package smbfsx. - * Fixes bug #18000 (typo in postinst). - * Fixes bug #17958 (postinst asks obsolete question). Actually, - the question is still asked, but only if Samba is run as daemons. - * Created a multi-binary package from the Samba sources: package - samba and new package smbfsx which provides SMB mount utilities - for kernels > 2.1.70. - - -- Eloy A. Paris <peloy@debian.org> Mon, 9 Feb 1998 19:47:05 -0400 - -samba (1.9.18p2-1) unstable; urgency=low - - * New upstream version. - * Removed /etc/cron.weekly/samba because Samba does not handle well - rotation of log files (if the log file is rotated Samba will - continue to log to the rotated file, instead of the just created - one). In any case, Samba will rotate log files after an specific - file size. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jan 1998 22:34:27 -0400 - -samba (1.9.18p1-2) unstable; urgency=low - - * Created a multi-binary package out of the Samba sources to provide - packages samba and smbfsx (userland utilities to work with - smbfs with kernels > 2.1.x. - - -- Eloy A. Paris <peloy@debian.org> Sat, 17 Jan 1998 09:23:48 -0400 - -samba (1.9.18p1-1) unstable; urgency=low - - * New upstream version. - * Created /etc/cron.daily/samba to save a copy of /etc/smbpasswd in - /var/backups/smbpasswd.bak. - - -- Eloy A. Paris <peloy@debian.org> Wed, 14 Jan 1998 13:40:56 -0400 - -samba (1.9.18alpha14-1) unstable; urgency=low - - * New upstream version. - * Added a note to the postinst script telling the user that he/she - needs to run smbpasswd manually after creating a new /etc/smbpasswd - from /etc/passwd. - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Dec 1997 23:44:37 -0400 - -samba (1.9.18alpha13-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 16 Dec 1997 13:02:32 -0400 - -samba (1.9.18alpha12-1) unstable; urgency=low - - * New upstream version. - * Conflicts with the sambades package because the new Samba 1.9.18 - series do not depend on the DES libraries to support encrypted - passwords. - * Added parameter "encrypt passwords = yes" to /etc/smb.conf. - * Compiled with support for quotas in disk_free(). - * Home directories are now exported read only by default. - * Re-worked debian/rules. - * Re-worked sample smb.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Dec 1997 22:50:34 -0400 - -samba (1.9.17p4-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable by everybody because some Samba utilities - will fail otherwise when run by non-root users. - * Dropped PAM support while the PAM libraries are ported to libc6. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Oct 1997 18:08:49 -0400 - -samba (1.9.17p3-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable only by root as suggested by smbd's man page. - - -- Eloy A. Paris <peloy@debian.org> Wed, 15 Oct 1997 09:21:25 -0400 - -samba (1.9.17p2-2) unstable; urgency=low - - * Running Samba as daemons instead of from inetd. - * Removing netbios entries in /etc/inetd.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 9 Oct 1997 23:37:25 -0400 - -samba (1.9.17p2-1) unstable; urgency=low - - * New upstream version that fixes a serious security hole. - * Removed Debian patches added in 1.9.17-1 and 1.9.17p1-1 because - these patches are now part of the upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Sep 1997 22:54:33 -0400 - -samba (1.9.17p1-1) unstable; urgency=low - - * New upstream version. - * Defined symbol _LINUX_C_LIB_VERSION_MAJOR as 6 in includes.h to shut up - compiler warnings. - * Included rpcsvc/ypclnt.h in includes.h to shut up compiler warnings. - * Included crypt.h to have function prototype for crypt(). - * Included netinet/tcp.h to have some socket options included. - * Included netinet/ip.h to have some socket options included. - * Linking with libcrypt (LIBM='... -lcrypt'). Without including this - library smbd generates a seg. fault when authenticating users (?). - - -- Eloy A. Paris <debian.org> Wed, 10 Sep 1997 22:09:18 -0400 - -samba (1.9.17-1) unstable; urgency=low - - * New upstream version (called the "Browse Fix Release") - * Added the option --oknodo to the start-stop-daemon invocation in prerm - script. This was because the prerm was failing because start-stop-daemon - was returning an error code if no nmbd or smbd daemons were found - to kill. - * The function yp_get_default_domain(), referenced in three source - files was part of libc5 but with libc6 (glibc2) it has been moved - to libnss_nis. Since the linker was unable to find the function - I had to add LIBSM='-lnss_nis' to debian/rules. - * Added -DNO_ASMSIGNALH and -DGLIBC2 to FLAGSM in debian/rules - because compiling was failing because of conflicts with glibc2. - * Patched source/includes.h to include termios.h if GLIBC2 is defined. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Aug 1997 08:39:32 -0400 - -samba (1.9.17alpha5-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Aug 1997 18:05:02 -0400 - -samba (1.9.16p11-3) unstable; urgency=low - - * Fixed accidental omission of /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 15 Mar 1997 22:31:26 -0500 - -samba (1.9.16p11-2) unstable; urgency=low - - * Recompiled against newer PAM libraries. - * Added /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 8 Mar 1997 01:16:28 -0500 - -samba (1.9.16p11-1) unstable; urgency=low - - * New upstream release. - * Added PAM support. - - -- Klee Dienes <klee@debian.org> Tue, 25 Feb 1997 18:00:12 -0500 - -samba (1.9.16p9-2) unstable; urgency=low - - * minor packaging changes - - -- Klee Dienes <klee@sauron.sedona.com> Sun, 3 Nov 1996 11:45:37 -0700 - -samba (1.9.16p9-1) unstable; urgency=low - - * upgraded to new upstream version - - -- Klee Dienes <klee@sauron.sedona.com> Sat, 26 Oct 1996 21:38:20 -0700 - -1.9.16alpha10-1: - 960714 - * Removed Package_Revision from control file. - * Removed -m486 compiler option. - * Added Architecture, Section and Priority fields to control file. - * Upgraded to latest upstream version. - * Uses update-inetd now. - * Added shadow passwords support. - * Fixed Bug#1946: nmbd won't browse - -1.9.15p4-1: - 951128 - * Upgraded to latest upstream version. - * Fixed many bugs. - * Adds Master Browsing support. - * Converted to ELF. - * Fixed bug #1825 - nmbd is now killed when removing samba. - -1.9.14-1: - 950926 Andrew Howell <andrew@it.com.au> - * Upgraded to latest version. - * Fixed Bug #1139 - samba won't print - -1.9.14alpha5-1: - * Fixes killing of inetd problem in debian.postint and debian.postrm - -1.9.14alpha5-0: - 950704 Andrew Howell <andrew@it.com.au> - * Taken over samba package from Bruce Perens. - * Upgraded to newest version of samba. - -1.9.02-1: - 9-January-1994 Bruce Perens <Bruce@Pixar.com> - * Added Debian GNU/Linux package maintenance system files, and - configured for Debian systems. diff --git a/packaging/Debian/debian-unstable/config.cache b/packaging/Debian/debian-unstable/config.cache deleted file mode 100644 index 8872a27b76..0000000000 --- a/packaging/Debian/debian-unstable/config.cache +++ /dev/null @@ -1,221 +0,0 @@ -# -# 22 August 2001 Steve Langasek <vorlon@debian.org> -# -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -# -# This config.cache file contains a list of acceptable autoconf -# values which can be used in compiling Samba for Debian woody/sid. -# -# Autoconf sorts options alphabetically in its output. This file -# groups options logically. - - -# Load any architecture-specific settings -if [ -n "$DEB_HOST_GNU_TYPE" \ - -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then - . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -fi - - -# This is at the top because it's most in need of regular tweaking. -# These are options which are supported on 2.4 kernels, but not on 2.2 -# kernels. - -samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} - - -# These are present in 2.2 kernels, but not in 2.0... - -samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} - - -# Various basic libc/compiler stuff that it's blindingly obvious that -# Linux supports (now watch me get bitten for saying that) - -ac_cv_c_const=${ac_cv_c_const=yes} -ac_cv_c_inline=${ac_cv_c_inline=inline} -samba_cv_volatile=${samba_cv_volatile=yes} -ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -ac_cv_func_bzero=${ac_cv_func_bzero=yes} -ac_cv_func_chmod=${ac_cv_func_chmod=yes} -ac_cv_func_chown=${ac_cv_func_chown=yes} -ac_cv_func_chroot=${ac_cv_func_chroot=yes} -ac_cv_func_connect=${ac_cv_func_connect=yes} -ac_cv_func_dup2=${ac_cv_func_dup2=yes} -ac_cv_func_execl=${ac_cv_func_execl=yes} -ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -ac_cv_func_fchown=${ac_cv_func_fchown=yes} -ac_cv_func_fstat=${ac_cv_func_fstat=yes} -ac_cv_func_fsync=${ac_cv_func_fsync=yes} -ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -ac_cv_func_glob=${ac_cv_func_glob=yes} -ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -ac_cv_func_llseek=${ac_cv_func_llseek=yes} -ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -ac_cv_func_memmove=${ac_cv_func_memmove=yes} -ac_cv_func_memset=${ac_cv_func_memset=yes} -ac_cv_func_mktime=${ac_cv_func_mktime=yes} -ac_cv_func_pipe=${ac_cv_func_pipe=yes} -ac_cv_func_poll=${ac_cv_func_poll=yes} -ac_cv_func_pread=${ac_cv_func_pread=yes} -ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -ac_cv_func_rand=${ac_cv_func_rand=yes} -ac_cv_func_random=${ac_cv_func_random=yes} -ac_cv_func_readlink=${ac_cv_func_readlink=yes} -ac_cv_func_rename=${ac_cv_func_rename=yes} -ac_cv_func_select=${ac_cv_func_select=yes} -ac_cv_func_setenv=${ac_cv_func_setenv=yes} -ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -ac_cv_func_setsid=${ac_cv_func_setsid=yes} -ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -ac_cv_func_srand=${ac_cv_func_srand=yes} -ac_cv_func_srandom=${ac_cv_func_srandom=yes} -ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -ac_cv_func_strchr=${ac_cv_func_strchr=yes} -ac_cv_func_strdup=${ac_cv_func_strdup=yes} -ac_cv_func_strerror=${ac_cv_func_strerror=yes} -ac_cv_func_strftime=${ac_cv_func_strftime=yes} -ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -ac_cv_func_symlink=${ac_cv_func_symlink=yes} -ac_cv_func_usleep=${ac_cv_func_usleep=yes} -ac_cv_func_utime=${ac_cv_func_utime=yes} -ac_cv_func_utimes=${ac_cv_func_utimes=yes} -ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -ac_cv_type_size_t=${ac_cv_type_size_t=yes} -ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -samba_cv_socklen_t=${samba_cv_socklen_t=yes} - -# Yes, we know Linux supports fcntl locking. Just ignore -# any errors caused by building on an NFS mount. -samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} - - -# smbwrapper doesn't work because the glibc maintainers don't want -# to support transparent userland VFS. We might as well preempt -# any checks for shadowed symbols that are only useful for smbwrapper. - -ac_cv_func___chdir=${ac_cv_func___chdir=no} -ac_cv_func__chdir=${ac_cv_func__chdir=no} -ac_cv_func___close=${ac_cv_func___close=no} -ac_cv_func__close=${ac_cv_func__close=no} -ac_cv_func___closedir=${ac_cv_func___closedir=no} -ac_cv_func__closedir=${ac_cv_func__closedir=no} -ac_cv_func___dup=${ac_cv_func___dup=no} -ac_cv_func__dup=${ac_cv_func__dup=no} -ac_cv_func___dup2=${ac_cv_func___dup2=no} -ac_cv_func__dup2=${ac_cv_func__dup2=no} -ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -ac_cv_func___fork=${ac_cv_func___fork=no} -ac_cv_func__fork=${ac_cv_func__fork=no} -ac_cv_func___fstat=${ac_cv_func___fstat=no} -ac_cv_func__fstat=${ac_cv_func__fstat=no} -ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -ac_cv_func___getdents=${ac_cv_func___getdents=no} -ac_cv_func__getdents=${ac_cv_func__getdents=no} -ac_cv_func___llseek=${ac_cv_func___llseek=no} -ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -ac_cv_func__llseek=${ac_cv_func__llseek=no} -ac_cv_func___lseek=${ac_cv_func___lseek=no} -ac_cv_func__lseek=${ac_cv_func__lseek=no} -ac_cv_func___lstat=${ac_cv_func___lstat=no} -ac_cv_func__lstat=${ac_cv_func__lstat=no} -ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -ac_cv_func___open=${ac_cv_func___open=no} -ac_cv_func__open=${ac_cv_func__open=no} -ac_cv_func___open64=${ac_cv_func___open64=no} -ac_cv_func__open64=${ac_cv_func__open64=no} -ac_cv_func___opendir=${ac_cv_func___opendir=no} -ac_cv_func__opendir=${ac_cv_func__opendir=no} -ac_cv_func___pread=${ac_cv_func___pread=no} -ac_cv_func__pread=${ac_cv_func__pread=no} -ac_cv_func___pread64=${ac_cv_func___pread64=no} -ac_cv_func__pread64=${ac_cv_func__pread64=no} -ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -ac_cv_func___read=${ac_cv_func___read=no} -ac_cv_func__read=${ac_cv_func__read=no} -ac_cv_func___readdir=${ac_cv_func___readdir=no} -ac_cv_func__readdir=${ac_cv_func__readdir=no} -ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -ac_cv_func___stat=${ac_cv_func___stat=no} -ac_cv_func__stat=${ac_cv_func__stat=no} -ac_cv_func___stat64=${ac_cv_func___stat64=no} -ac_cv_func__stat64=${ac_cv_func__stat64=no} -ac_cv_func___telldir=${ac_cv_func___telldir=no} -ac_cv_func__telldir=${ac_cv_func__telldir=no} -ac_cv_func___write=${ac_cv_func___write=no} -ac_cv_func__write=${ac_cv_func__write=no} -ac_cv_func___xstat=${ac_cv_func___xstat=no} - - - -# Miscellaneous stuff that isn't, and shouldn't be, available -# in Debian. Those interested in building debs for other systems may -# need to remove some of these defines. - -ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -ac_cv_func_setluid=${ac_cv_func_setluid=no} -ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} diff --git a/packaging/Debian/debian-unstable/config.cache.alpha-linux b/packaging/Debian/debian-unstable/config.cache.alpha-linux deleted file mode 100644 index 6d17192026..0000000000 --- a/packaging/Debian/debian-unstable/config.cache.alpha-linux +++ /dev/null @@ -1,12 +0,0 @@ -# 22 Aug 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the alpha-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-unstable/config.cache.alpha-linux-gnu b/packaging/Debian/debian-unstable/config.cache.alpha-linux-gnu deleted file mode 100644 index 6d17192026..0000000000 --- a/packaging/Debian/debian-unstable/config.cache.alpha-linux-gnu +++ /dev/null @@ -1,12 +0,0 @@ -# 22 Aug 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the alpha-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-unstable/config.cache.sparc-linux b/packaging/Debian/debian-unstable/config.cache.sparc-linux deleted file mode 100644 index a2a21b1d3a..0000000000 --- a/packaging/Debian/debian-unstable/config.cache.sparc-linux +++ /dev/null @@ -1,13 +0,0 @@ -# 24 Spe 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the sparc-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresuid=${samba_cv_have_setresuid=no} -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-unstable/config.cache.sparc-linux-gnu b/packaging/Debian/debian-unstable/config.cache.sparc-linux-gnu deleted file mode 100644 index a2a21b1d3a..0000000000 --- a/packaging/Debian/debian-unstable/config.cache.sparc-linux-gnu +++ /dev/null @@ -1,13 +0,0 @@ -# 24 Spe 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the sparc-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresuid=${samba_cv_have_setresuid=no} -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-unstable/control b/packaging/Debian/debian-unstable/control deleted file mode 100644 index 1ac2b3bd76..0000000000 --- a/packaging/Debian/debian-unstable/control +++ /dev/null @@ -1,203 +0,0 @@ -Source: samba -Section: net -Priority: optional -Maintainer: Eloy A. Paris <peloy@debian.org> -Uploaders: Steve Langasek <vorlon@debian.org>, Christian Perrier <bubulle@debian.org> -Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline5-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [i386 ia64 alpha amd64 arm hppa m32r m68k mips mipsel powerpc ppc64 s390 s390x sh3 sh3eb sh4 sh4eb sparc], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1), libpopt-dev, dpkg-dev (>= 1.13.9) -Standards-Version: 3.6.2 - -Package: samba -Architecture: any -Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules, lsb-base (>= 3.0-6) -Replaces: samba-common (<= 2.0.5a-2) -Suggests: samba-doc -Description: a LanManager-like file and printer server for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the components necessary to turn your - Debian GNU/Linux box into a powerful file and printer server. - . - Currently, the Samba Debian packages consist of the following: - . - samba - LanManager-like file and printer server for Unix. - samba-common - Samba common files used by both the server and the client. - smbclient - LanManager-like simple client for Unix. - swat - Samba Web Administration Tool - samba-doc - Samba documentation. - smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). - libpam-smbpass - pluggable authentication module for SMB password database - libsmbclient - Shared library that allows applications to talk to SMB servers - libsmbclient-dev - libsmbclient shared libraries - winbind: Service to resolve user and group information from Windows NT servers - python2.3-samba: Python bindings that allow access to various aspects of Samba - . - It is possible to install a subset of these packages depending on - your particular needs. For example, to access other SMB servers you - should only need the smbclient and samba-common packages. - . - http://www.samba.org/ - -Package: samba-common -Architecture: any -Depends: libpam-modules, ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<< 3.0.20b-1) -Description: Samba common files used by both the server and the client - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the common files that are used by both the server - (provided in the samba package) and the client (provided in the smbclient - package). - -Package: smbclient -Architecture: any -Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Provides: samba-client -Suggests: smbfs -Description: a LanManager-like simple client for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains some client components of the Samba suite. In - particular it includes the command line utilities smbclient, smbtar, - and smbspool. If you want to mount shares exported from Microsoft - Windows machines or a Samba server you must install the smbfs package. - -Package: swat -Architecture: any -Depends: samba (= ${Source-Version}), ${shlibs:Depends}, ${misc:Depends} -Recommends: samba-doc -Description: Samba Web Administration Tool - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the components of the Samba suite that are needed - for Web administration of the Samba server. - . - Note: if you want to use the on-line documentation that is accesible - through the Swat front-end you must install the samba-doc package. - -Package: samba-doc -Section: doc -Architecture: all -Description: Samba documentation - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the documentation that comes in the original - tarball. - -Package: smbfs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Suggests: smbclient -Replaces: smbfsx -Conflicts: smbfsx, suidmanager (<< 0.50) -Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) - Smbfs is a filesystem which understands the SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - . - If you want to use command-line utilities like smbclient, smbtar - and/or smbspool you just need to install the smbclient package. - . - Starting with the Debian Samba packages version 2.2.0-1, the old smbfs - utilities for 2.0.x have been removed. There are no wrapper scripts - that call a specific smbmount/smbumount depending on the kernel - version. If you are using a 2.0.x kernel please upgrade or use the - latest Samba 2.0.7 Debian package. - -Package: libpam-smbpass -Section: admin -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Suggests: samba -Description: pluggable authentication module for SMB password database - This is a stackable PAM module that allows a system administrator to easily - migrate to using encrypted passwords for Samba and to keep smb passwords in - sync with unix passwords. Unlike other solutions, it does this without - requiring users to change their existing passwords or login to Samba using - cleartext passwords. - -Package: libsmbclient -Section: libs -Priority: optional -Architecture: any -Depends: ${shlibs:Depends} -Description: shared library that allows applications to talk to SMB servers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient shared library. - -Package: libsmbclient-dev -Section: libdevel -Priority: extra -Architecture: any -Depends: libsmbclient (= ${Source-Version}) -Description: libsmbclient static libraries and headers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient static libraries and headers - needed to build applications that use SMB services. - -Package: winbind -Section: net -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<= 2.2.3-2) -Description: service to resolve user and group information from Windows NT servers - This package provides the winbindd daemon, which provides a - service for the Name Service Switch capability that is present - in most modern C libraries (like the GNU C Library - glibc.) - . - The service provided by winbindd is called `winbind' and - can be used to resolve user and group information from a - Windows NT server. The service can also provide authentication - services via an associated PAM module. - -Package: python2.3-samba -Section: python -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, python2.3 -Description: Python bindings that allow access to various aspects of Samba - The Samba Python bindings allow you to access various aspects of Samba. - At the moment their status is "experimental" but they have been reported - to work well. - . - See /usr/share/doc/python2.3-samba/examples for a couple of examples. - -Package: samba-dbg -Section: devel -Architecture: any -Depends: samba (= ${Source-Version}) -Description: Samba debugging symbols - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains debugging symbols for the programs included in - the samba and smbclient packages. diff --git a/packaging/Debian/debian-unstable/control.in b/packaging/Debian/debian-unstable/control.in deleted file mode 100644 index 1beeb70250..0000000000 --- a/packaging/Debian/debian-unstable/control.in +++ /dev/null @@ -1,203 +0,0 @@ -Source: samba -Section: net -Priority: optional -Maintainer: Eloy A. Paris <peloy@debian.org> -Uploaders: Steve Langasek <vorlon@debian.org>, Christian Perrier <bubulle@debian.org> -Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline5-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [@libacl@], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1), libpopt-dev, dpkg-dev (>= 1.13.9) -Standards-Version: 3.6.2 - -Package: samba -Architecture: any -Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules, lsb-base (>= 3.0-6) -Replaces: samba-common (<= 2.0.5a-2) -Suggests: samba-doc -Description: a LanManager-like file and printer server for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the components necessary to turn your - Debian GNU/Linux box into a powerful file and printer server. - . - Currently, the Samba Debian packages consist of the following: - . - samba - LanManager-like file and printer server for Unix. - samba-common - Samba common files used by both the server and the client. - smbclient - LanManager-like simple client for Unix. - swat - Samba Web Administration Tool - samba-doc - Samba documentation. - smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). - libpam-smbpass - pluggable authentication module for SMB password database - libsmbclient - Shared library that allows applications to talk to SMB servers - libsmbclient-dev - libsmbclient shared libraries - winbind: Service to resolve user and group information from Windows NT servers - python2.3-samba: Python bindings that allow access to various aspects of Samba - . - It is possible to install a subset of these packages depending on - your particular needs. For example, to access other SMB servers you - should only need the smbclient and samba-common packages. - . - http://www.samba.org/ - -Package: samba-common -Architecture: any -Depends: libpam-modules, ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<< 3.0.20b-1) -Description: Samba common files used by both the server and the client - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the common files that are used by both the server - (provided in the samba package) and the client (provided in the smbclient - package). - -Package: smbclient -Architecture: any -Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} -Replaces: samba (<< 2.999+3.0.alpha21-4) -Provides: samba-client -Suggests: smbfs -Description: a LanManager-like simple client for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains some client components of the Samba suite. In - particular it includes the command line utilities smbclient, smbtar, - and smbspool. If you want to mount shares exported from Microsoft - Windows machines or a Samba server you must install the smbfs package. - -Package: swat -Architecture: any -Depends: samba (= ${Source-Version}), ${shlibs:Depends}, ${misc:Depends} -Recommends: samba-doc -Description: Samba Web Administration Tool - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the components of the Samba suite that are needed - for Web administration of the Samba server. - . - Note: if you want to use the on-line documentation that is accesible - through the Swat front-end you must install the samba-doc package. - -Package: samba-doc -Section: doc -Architecture: all -Description: Samba documentation - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the documentation that comes in the original - tarball. - -Package: smbfs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Suggests: smbclient -Replaces: smbfsx -Conflicts: smbfsx, suidmanager (<< 0.50) -Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) - Smbfs is a filesystem which understands the SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - . - If you want to use command-line utilities like smbclient, smbtar - and/or smbspool you just need to install the smbclient package. - . - Starting with the Debian Samba packages version 2.2.0-1, the old smbfs - utilities for 2.0.x have been removed. There are no wrapper scripts - that call a specific smbmount/smbumount depending on the kernel - version. If you are using a 2.0.x kernel please upgrade or use the - latest Samba 2.0.7 Debian package. - -Package: libpam-smbpass -Section: admin -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Suggests: samba -Description: pluggable authentication module for SMB password database - This is a stackable PAM module that allows a system administrator to easily - migrate to using encrypted passwords for Samba and to keep smb passwords in - sync with unix passwords. Unlike other solutions, it does this without - requiring users to change their existing passwords or login to Samba using - cleartext passwords. - -Package: libsmbclient -Section: libs -Priority: optional -Architecture: any -Depends: ${shlibs:Depends} -Description: shared library that allows applications to talk to SMB servers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient shared library. - -Package: libsmbclient-dev -Section: libdevel -Priority: extra -Architecture: any -Depends: libsmbclient (= ${Source-Version}) -Description: libsmbclient static libraries and headers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient static libraries and headers - needed to build applications that use SMB services. - -Package: winbind -Section: net -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<= 2.2.3-2) -Description: service to resolve user and group information from Windows NT servers - This package provides the winbindd daemon, which provides a - service for the Name Service Switch capability that is present - in most modern C libraries (like the GNU C Library - glibc.) - . - The service provided by winbindd is called `winbind' and - can be used to resolve user and group information from a - Windows NT server. The service can also provide authentication - services via an associated PAM module. - -Package: python2.3-samba -Section: python -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, python2.3 -Description: Python bindings that allow access to various aspects of Samba - The Samba Python bindings allow you to access various aspects of Samba. - At the moment their status is "experimental" but they have been reported - to work well. - . - See /usr/share/doc/python2.3-samba/examples for a couple of examples. - -Package: samba-dbg -Section: devel -Architecture: any -Depends: samba (= ${Source-Version}) -Description: Samba debugging symbols - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains debugging symbols for the programs included in - the samba and smbclient packages. diff --git a/packaging/Debian/debian-unstable/copyright b/packaging/Debian/debian-unstable/copyright deleted file mode 100644 index 35056e2bb3..0000000000 --- a/packaging/Debian/debian-unstable/copyright +++ /dev/null @@ -1,28 +0,0 @@ -This is the Debian Linux prepackaged version of the Samba SMB -(LAN-Manager) server. Samba was written by Andrew Tridgell -<Andrew.Tridgell@anu.edu.au> and many others. - -This package was put together by Eloy Paris <peloy@debian.org>, -Steve Langasek <vorlon@debian.org>, and VÃctor Pérez Pereira -<vperez@debianvenezuela.org> based on previous work by Klee Dienes -<klee@debian.org>, Andrew Howell <andrew@it.com.au> and Bruce Perens -<bruce@pixar.com> from sources found at -<URL:ftp://ftp.samba.org/pub/samba>. - -Copyright: - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -On Debian GNU/Linux systems, the complete text of the GNU General -Public License can be found in `/usr/share/common-licenses/GPL'. diff --git a/packaging/Debian/debian-unstable/gdbcommands b/packaging/Debian/debian-unstable/gdbcommands deleted file mode 100644 index 5774b9ae31..0000000000 --- a/packaging/Debian/debian-unstable/gdbcommands +++ /dev/null @@ -1,2 +0,0 @@ -bt -quit diff --git a/packaging/Debian/debian-unstable/libpam-smbpass.docs b/packaging/Debian/debian-unstable/libpam-smbpass.docs deleted file mode 100644 index 89fbbf9042..0000000000 --- a/packaging/Debian/debian-unstable/libpam-smbpass.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/pam_smbpass/README -source/pam_smbpass/TODO diff --git a/packaging/Debian/debian-unstable/libpam-smbpass.examples b/packaging/Debian/debian-unstable/libpam-smbpass.examples deleted file mode 100644 index 48d841b2c1..0000000000 --- a/packaging/Debian/debian-unstable/libpam-smbpass.examples +++ /dev/null @@ -1,5 +0,0 @@ -source/pam_smbpass/samples/README -source/pam_smbpass/samples/kdc-pdc -source/pam_smbpass/samples/password-mature -source/pam_smbpass/samples/password-migration -source/pam_smbpass/samples/password-sync diff --git a/packaging/Debian/debian-unstable/libpam-smbpass.files b/packaging/Debian/debian-unstable/libpam-smbpass.files deleted file mode 100644 index 4263df5c0f..0000000000 --- a/packaging/Debian/debian-unstable/libpam-smbpass.files +++ /dev/null @@ -1 +0,0 @@ -lib/security/pam_smbpass.so diff --git a/packaging/Debian/debian-unstable/libsmbclient-dev.examples b/packaging/Debian/debian-unstable/libsmbclient-dev.examples deleted file mode 100644 index 2094c40b55..0000000000 --- a/packaging/Debian/debian-unstable/libsmbclient-dev.examples +++ /dev/null @@ -1 +0,0 @@ -examples/libsmbclient/ diff --git a/packaging/Debian/debian-unstable/libsmbclient-dev.files b/packaging/Debian/debian-unstable/libsmbclient-dev.files deleted file mode 100644 index a52c17cfc5..0000000000 --- a/packaging/Debian/debian-unstable/libsmbclient-dev.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/lib/libsmbclient.a -usr/lib/libsmbclient.so -usr/include/libsmbclient.h diff --git a/packaging/Debian/debian-unstable/libsmbclient.files b/packaging/Debian/debian-unstable/libsmbclient.files deleted file mode 100644 index 18b7f3b165..0000000000 --- a/packaging/Debian/debian-unstable/libsmbclient.files +++ /dev/null @@ -1,2 +0,0 @@ -usr/lib/libsmbclient.so.0.1 -usr/lib/libsmbclient.so.0 diff --git a/packaging/Debian/debian-unstable/libsmbclient.shlibs b/packaging/Debian/debian-unstable/libsmbclient.shlibs deleted file mode 100644 index 532b5de4d1..0000000000 --- a/packaging/Debian/debian-unstable/libsmbclient.shlibs +++ /dev/null @@ -1 +0,0 @@ -libsmbclient 0 libsmbclient (>= 3.0.2a-1) diff --git a/packaging/Debian/debian-unstable/mksmbpasswd.8 b/packaging/Debian/debian-unstable/mksmbpasswd.8 deleted file mode 100644 index 0a500102e8..0000000000 --- a/packaging/Debian/debian-unstable/mksmbpasswd.8 +++ /dev/null @@ -1,28 +0,0 @@ -.TH MKSMBPASSWD 8 12-Apr-1998 -.SH NAME -mksmbpasswd \- formats a /etc/passwd entry for a smbpasswd file -.SH SYNOPSIS -mksmbpasswd cat /etc/passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd -.SH DESCRIPTION -.B mksmbpasswd -should be used only once, the first time Samba is installed. The idea -is to ease accounts creation by transferring all user accounts from -/etc/passwd to /etc/samba/smbpasswd. -.PP -Please note that passwords are not transferred automatically from -/etc/passwd to the new /etc/samba/smbpasswd file. After running -.B mksmbpasswd -all accounts are disabled so the system administrator must run -smbpasswd for each account that needs to be enable. -.SH FILES -.TP -/etc/passwd -System wide accounts file -.TP -/etc/samba/smbpasswd -Encrypted passwords file for the Samba daemons -.SH SEE ALSO -samba(7), nmbd(8), smbd(8) -.SH AUTHOR -Eloy A. Paris <peloy@debian.org> (man page based on sendmailconfig's man page -by Robert Leslie <rob@mars.org>) diff --git a/packaging/Debian/debian-unstable/mksmbpasswd.awk b/packaging/Debian/debian-unstable/mksmbpasswd.awk deleted file mode 100644 index a7b41a725d..0000000000 --- a/packaging/Debian/debian-unstable/mksmbpasswd.awk +++ /dev/null @@ -1,5 +0,0 @@ -#!/usr/bin/awk -f -BEGIN {FS=":" - printf("#\n# SMB password file.\n#\n") - } -{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U ]:LCT-00000000:%s\n", $1, $3, $5) } diff --git a/packaging/Debian/debian-unstable/panic-action b/packaging/Debian/debian-unstable/panic-action deleted file mode 100644 index 13f773c1ef..0000000000 --- a/packaging/Debian/debian-unstable/panic-action +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh - -# Redirect all output to our mail command -( - # We must be given a pid to look at - if [ -z "$1" ]; then - echo "$0 called with no arguments." - exit 1 - fi - - if [ ! -d "/proc/$1" ]; then - echo "$0: No such process: $1" - exit 1 - fi - - # Find out what binary we're debugging - BINARYNAME=`readlink "/proc/$1/exe"` - - # Generic header for our email - echo "The Samba 'panic action' script, $0," - echo "was called for pid $1 ($BINARYNAME)." - echo - - if [ -z "$BINARYNAME" ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, the executable could not be found for process $1." - echo "It may have died unexpectedly, or you may not have permission to" - echo "debug the process." - exit 1 - fi - - # No debugger - if [ ! -x /usr/bin/gdb ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, gdb was not found on your system, so the error could not be" - echo "debugged. Please install the gdb package so that debugging information is" - echo "available the next time such a problem occurs." - exit 1 - fi - - echo "Below is a backtrace for this process generated with gdb, which shows" - echo "the state of the program at the time the error occured. You are" - echo "encouraged to submit this information as a bug report to Debian. For" - echo "information about the procedure for submitting bug reports , please see" - echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage." - echo - gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1" -) | mail -s "Segfault in Samba" root diff --git a/packaging/Debian/debian-unstable/patches/VERSION.patch b/packaging/Debian/debian-unstable/patches/VERSION.patch deleted file mode 100644 index efa7d85d4d..0000000000 --- a/packaging/Debian/debian-unstable/patches/VERSION.patch +++ /dev/null @@ -1,8 +0,0 @@ ---- samba-3.0.0rc2/source/VERSION.orig 2003-09-02 21:56:11.000000000 -0400 -+++ samba-3.0.0rc2/source/VERSION 2003-09-02 21:56:30.000000000 -0400 -@@ -78,4 +78,4 @@ - # e.g. SAMBA_VERSION_VENDOR_SUFFIX=vendor_version() # - # -> "CVS 3.0.0rc2-VendorVersion" # - ######################################################## --SAMBA_VERSION_VENDOR_SUFFIX= -+SAMBA_VERSION_VENDOR_SUFFIX="Debian" diff --git a/packaging/Debian/debian-unstable/patches/cups.patch b/packaging/Debian/debian-unstable/patches/cups.patch deleted file mode 100644 index 8b1b8653d9..0000000000 --- a/packaging/Debian/debian-unstable/patches/cups.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- samba-3.0.10.orig/source/include/includes.h -+++ samba-3.0.10/source/include/includes.h -@@ -940,10 +940,7 @@ - #endif - - #ifndef DEFAULT_PRINTING --#ifdef HAVE_CUPS --#define DEFAULT_PRINTING PRINT_CUPS --#define PRINTCAP_NAME "cups" --#elif defined(SYSV) -+#if defined(SYSV) - #define DEFAULT_PRINTING PRINT_SYSV - #define PRINTCAP_NAME "lpstat" - #else diff --git a/packaging/Debian/debian-unstable/patches/documentation.patch b/packaging/Debian/debian-unstable/patches/documentation.patch deleted file mode 100644 index 505a53c51b..0000000000 --- a/packaging/Debian/debian-unstable/patches/documentation.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- samba-3.0.4/docs/manpages/swat.8.orig 2004-05-05 10:22:50.000000000 -0400 -+++ samba-3.0.4/docs/manpages/swat.8 2004-05-10 13:25:53.000000000 -0400 -@@ -80,6 +80,13 @@ - .SH "INSTALLATION" - - .PP -+\fBDebian-specific Note\fR: all these steps have already been done for -+you. However, by default, swat is not enabled. This has been done for -+security reasons. To enable swat you need to edit /etc/inetd.conf, -+uncomment the swat entry (usually at the end of the file), and then -+restart inetd. -+ -+.PP - Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&. - - .PP -@@ -87,13 +94,13 @@ - - .TP 3 - \(bu --/usr/local/samba/sbin/swat -+/usr/sbin/swat - .TP - \(bu --/usr/local/samba/swat/images/* -+/usr/share/samba/swat/images/* - .TP - \(bu --/usr/local/samba/swat/help/* -+/usr/share/samba/swat/help/* - .LP - - .SS "Inetd Installation" -@@ -102,7 +109,7 @@ - You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&. - - .PP --In \fI/etc/services\fR you need to add a line like this: -+In \fI/etc/services\fR you need to add a line like this (not needed for Debian): - - .PP - \fBswat 901/tcp\fR -@@ -114,10 +121,10 @@ - the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&. - - .PP --In \fI/etc/inetd\&.conf\fR you should add a line like this: -+In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it automatically. You need to uncomment the line, though, because it is added commented out for security reasons): - - .PP --\fBswat stream tcp nowait\&.400 root /usr/local/samba/sbin/swat swat\fR -+\fBswat stream tcp nowait\&.400 root /usr/sbin/swat swat\fR - - .PP - Once you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill \-1 PID \fR where PID is the process ID of the inetd daemon\&. -@@ -141,8 +148,8 @@ - This file must contain a mapping of service name (e\&.g\&., swat) to service port (e\&.g\&., 901) and protocol type (e\&.g\&., tcp)\&. - - .TP --\fI/usr/local/samba/lib/smb\&.conf\fR --This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&. -+\fI/etc/samba/smb\&.conf\fR -+This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&. - - .SH "WARNINGS" - diff --git a/packaging/Debian/debian-unstable/patches/fhs.patch b/packaging/Debian/debian-unstable/patches/fhs.patch deleted file mode 100644 index a3cc7f3826..0000000000 --- a/packaging/Debian/debian-unstable/patches/fhs.patch +++ /dev/null @@ -1,578 +0,0 @@ -diff -uNr samba-3.0.10.orig/source/Makefile.in samba-3.0.10/source/Makefile.in ---- samba-3.0.10.orig/source/Makefile.in 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/Makefile.in 2004-12-17 03:55:29.000000000 -0800 -@@ -90,6 +90,13 @@ - # the directory where lock files go - LOCKDIR = @lockdir@ - -+# FHS directories; equal to LOCKDIR if not using --with-fhs -+CACHEDIR = @cachedir@ -+STATEDIR = @statedir@ -+ -+# Where to look for (and install) codepage databases. -+CODEPAGEDIR = @codepagedir@ -+ - # the directory where pid files go - PIDDIR = @piddir@ - # man pages language(s) -@@ -114,7 +121,7 @@ - PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\" - PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \ - -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\" --PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -+PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\" -DCACHEDIR=\"$(CACHEDIR)\" -DSTATEDIR=\"$(STATEDIR)\" - PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS) - - # Note that all executable programs now provide for an optional executable suffix. -@@ -1319,7 +1326,7 @@ - @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS) - - installdat: installdirs -- @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir) -+ @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(CODEPAGEDIR) $(srcdir) - - installmsg: installdirs - @$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR)$(LIBDIR) $(srcdir) -diff -uNr samba-3.0.10.orig/source/configure.in samba-3.0.10/source/configure.in ---- samba-3.0.10.orig/source/configure.in 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/configure.in 2004-12-17 03:55:29.000000000 -0800 -@@ -35,7 +35,7 @@ - [ --with-fhs Use FHS-compliant paths (default=no)], - [ case "$withval" in - yes) -- lockdir="\${VARDIR}/lib/samba" -+ lockdir="\${VARDIR}/run/samba" - piddir="\${VARDIR}/run" - mandir="\${prefix}/share/man" - logfilebase="\${VARDIR}/log/samba" -@@ -43,6 +43,10 @@ - libdir="\${prefix}/lib/samba" - configdir="${sysconfdir}/samba" - swatdir="\${DATADIR}/samba/swat" -+ codepagedir="\${DATADIR}/samba" -+ statedir="\${VARDIR}/lib/samba" -+ cachedir="\${VARDIR}/cache/samba" -+ AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths]) - ;; - esac]) - -@@ -201,6 +205,9 @@ - AC_SUBST(swatdir) - AC_SUBST(bindir) - AC_SUBST(sbindir) -+AC_SUBST(codepagedir) -+AC_SUBST(statedir) -+AC_SUBST(cachedir) - - dnl Unique-to-Samba variables we'll be playing with. - AC_SUBST(SHELL) -diff -uNr samba-3.0.10.orig/source/dynconfig.c samba-3.0.10/source/dynconfig.c ---- samba-3.0.10.orig/source/dynconfig.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/dynconfig.c 2004-12-17 03:55:29.000000000 -0800 -@@ -53,6 +53,13 @@ - pstring dyn_LMHOSTSFILE = LMHOSTSFILE; - - /** -+ * @brief Samba data directory. -+ * -+ * @sa data_path() to get the path to a file inside the CODEPAGEDIR. -+ **/ -+pstring dyn_CODEPAGEDIR = CODEPAGEDIR; -+ -+/** - * @brief Samba library directory. - * - * @sa lib_path() to get the path to a file inside the LIBDIR. -@@ -70,3 +77,27 @@ - - const pstring dyn_SMB_PASSWD_FILE = SMB_PASSWD_FILE; - const pstring dyn_PRIVATE_DIR = PRIVATE_DIR; -+ -+ -+/* In non-FHS mode, these should be configurable using 'lock dir ='; -+ but in FHS mode, they are their own directory. Implement as wrapper -+ functions so that everything can still be kept in dynconfig.c. -+ */ -+ -+char *dyn_STATEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return STATEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -+ -+char *dyn_CACHEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return CACHEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -diff -uNr samba-3.0.10.orig/source/groupdb/mapping.c samba-3.0.10/source/groupdb/mapping.c ---- samba-3.0.10.orig/source/groupdb/mapping.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/groupdb/mapping.c 2004-12-17 03:55:29.000000000 -0800 -@@ -140,7 +140,7 @@ - - if (tdb) - return True; -- tdb = tdb_open_log(lock_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open group mapping database\n")); - return False; -diff -uNr samba-3.0.10.orig/source/include/dynconfig.h samba-3.0.10/source/include/dynconfig.h ---- samba-3.0.10.orig/source/include/dynconfig.h 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/include/dynconfig.h 2004-12-17 03:55:29.000000000 -0800 -@@ -31,8 +31,12 @@ - extern pstring dyn_CONFIGFILE; - extern pstring dyn_LOGFILEBASE, dyn_LMHOSTSFILE; - extern pstring dyn_LIBDIR; -+extern pstring dyn_CODEPAGEDIR; - extern const fstring dyn_SHLIBEXT; - extern const pstring dyn_LOCKDIR; - extern const pstring dyn_PIDDIR; - extern const pstring dyn_SMB_PASSWD_FILE; - extern const pstring dyn_PRIVATE_DIR; -+ -+char *dyn_STATEDIR(void); -+char *dyn_CACHEDIR(void); -diff -uNr samba-3.0.10.orig/source/intl/lang_tdb.c samba-3.0.10/source/intl/lang_tdb.c ---- samba-3.0.10.orig/source/intl/lang_tdb.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/intl/lang_tdb.c 2004-12-17 03:55:29.000000000 -0800 -@@ -128,7 +128,7 @@ - if (!lang) - return True; - -- asprintf(&msg_path, "%s.msg", lib_path((const char *)lang)); -+ asprintf(&msg_path, "%s.msg", data_path((const char *)lang)); - if (stat(msg_path, &st) != 0) { - /* the msg file isn't available */ - DEBUG(10, ("lang_tdb_init: %s: %s\n", msg_path, -diff -uNr samba-3.0.10.orig/source/lib/account_pol.c samba-3.0.10/source/lib/account_pol.c ---- samba-3.0.10.orig/source/lib/account_pol.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/lib/account_pol.c 2004-12-17 03:55:29.000000000 -0800 -@@ -35,7 +35,7 @@ - - if (tdb) - return True; -- tdb = tdb_open_log(lock_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open account policy database\n")); - return False; -diff -uNr samba-3.0.10.orig/source/lib/util.c samba-3.0.10/source/lib/util.c ---- samba-3.0.10.orig/source/lib/util.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/lib/util.c 2004-12-17 03:55:29.000000000 -0800 -@@ -2362,6 +2362,61 @@ - } - - /** -+ * @brief Returns an absolute path to a file in the Samba data directory. -+ * -+ * @param name File to find, relative to CODEPAGEDIR. -+ * -+ * @retval Pointer to a static #pstring containing the full path. -+ **/ -+ -+char *data_path(const char *name) -+{ -+ static pstring fname; -+ snprintf(fname, sizeof(fname), "%s/%s", dyn_CODEPAGEDIR, name); -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba state directory -+ *****************************************************************/ -+char *state_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_STATEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba cache directory -+ *****************************************************************/ -+char *cache_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_CACHEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/** - * @brief Returns the platform specific shared library extension. - * - * @retval Pointer to a static #fstring containing the extension. -diff -uNr samba-3.0.10.orig/source/lib/util_unistr.c samba-3.0.10/source/lib/util_unistr.c ---- samba-3.0.10.orig/source/lib/util_unistr.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/lib/util_unistr.c 2004-12-17 03:55:29.000000000 -0800 -@@ -54,8 +54,8 @@ - if (initialised) return; - initialised = 1; - -- upcase_table = map_file(lib_path("upcase.dat"), 0x20000); -- lowcase_table = map_file(lib_path("lowcase.dat"), 0x20000); -+ upcase_table = map_file(data_path("upcase.dat"), 0x20000); -+ lowcase_table = map_file(data_path("lowcase.dat"), 0x20000); - - /* we would like Samba to limp along even if these tables are - not available */ -@@ -161,7 +161,7 @@ - return; - } - -- valid_file = map_file(lib_path("valid.dat"), 0x10000); -+ valid_file = map_file(data_path("valid.dat"), 0x10000); - if (valid_file) { - valid_table = valid_file; - mapped_file = 1; -diff -uNr samba-3.0.10.orig/source/libsmb/samlogon_cache.c samba-3.0.10/source/libsmb/samlogon_cache.c ---- samba-3.0.10.orig/source/libsmb/samlogon_cache.c 2004-12-17 03:50:08.000000000 -0800 -+++ samba-3.0.10/source/libsmb/samlogon_cache.c 2004-12-17 03:55:29.000000000 -0800 -@@ -34,7 +34,7 @@ - BOOL netsamlogon_cache_init(void) - { - if (!netsamlogon_tdb) { -- netsamlogon_tdb = tdb_open_log(lock_path(NETSAMLOGON_TDB), 0, -+ netsamlogon_tdb = tdb_open_log(cache_path(NETSAMLOGON_TDB), 0, - TDB_DEFAULT, O_RDWR | O_CREAT, 0600); - } - -@@ -67,7 +67,7 @@ - winbindd_cache.tdb open. Open the tdb if a NULL is passed. */ - - if (!tdb) { -- tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_DEFAULT, O_RDWR, 0600); - if (!tdb) { - DEBUG(5, ("netsamlogon_clear_cached_user: failed to open cache\n")); -diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c samba-3.0.10/source/nmbd/nmbd_serverlistdb.c ---- samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:55:29.000000000 -0800 -@@ -327,7 +327,7 @@ - - updatecount++; - -- pstrcpy(fname,lp_lockdir()); -+ pstrcpy(fname,dyn_CACHEDIR()); - trim_char(fname,'\0' ,'/'); - pstrcat(fname,"/"); - pstrcat(fname,SERVER_LIST); -diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c samba-3.0.10/source/nmbd/nmbd_winsserver.c ---- samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nmbd/nmbd_winsserver.c 2004-12-17 03:55:30.000000000 -0800 -@@ -234,7 +234,7 @@ - - add_samba_names_to_subnet(wins_server_subnet); - -- if((fp = x_fopen(lock_path(WINS_LIST),O_RDONLY,0)) == NULL) { -+ if((fp = x_fopen(state_path(WINS_LIST),O_RDONLY,0)) == NULL) { - DEBUG(2,("initialise_wins: Can't open wins database file %s. Error was %s\n", - WINS_LIST, strerror(errno) )); - return True; -@@ -1810,7 +1810,7 @@ - } - } - -- slprintf(fname,sizeof(fname)-1,"%s/%s", lp_lockdir(), WINS_LIST); -+ slprintf(fname,sizeof(fname)-1,"%s/%s", dyn_STATEDIR(), WINS_LIST); - all_string_sub(fname,"//", "/", 0); - slprintf(fnamenew,sizeof(fnamenew)-1,"%s.%u", fname, (unsigned int)sys_getpid()); - -diff -uNr samba-3.0.20b.orig/source/passdb/login_cache.c samba-3.0.20b/source/passdb/login_cache.c ---- samba-3.0.20b.orig/source/passdb/login_cache.c -+++ samba-3.0.20b/source/passdb/login_cache.c -@@ -36,7 +36,7 @@ - /* skip file open if it's already opened */ - if (cache) return True; - -- asprintf(&cache_fname, "%s/%s", lp_lockdir(), LOGIN_CACHE_FILE); -+ asprintf(&cache_fname, "%s/%s", dyn_CACHEDIR(), LOGIN_CACHE_FILE); - if (cache_fname) - DEBUG(5, ("Opening cache file at %s\n", cache_fname)); - else { -diff -uNr samba-3.0.20b.orig/source/nsswitch/winbindd_cache.c samba-3.0.20b/source/nsswitch/winbindd_cache.c ---- samba-3.0.20b.orig/source/nsswitch/winbindd_cache.c -+++ samba-3.0.20b/source/nsswitch/winbindd_cache.c -@@ -57,7 +57,7 @@ - if (opt_nocache) - return; - -- wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_CLEAR_IF_FIRST, O_RDWR|O_CREAT, 0600); - - if (!wcache->tdb) { -@@ -1471,7 +1471,7 @@ - if (wcache->tdb != NULL) - return True; - -- wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_CLEAR_IF_FIRST, O_RDWR|O_CREAT, 0600); - - if (wcache->tdb == NULL) { -diff -uNr samba-3.0.10.orig/source/nsswitch/winbindd_util.c samba-3.0.10/source/nsswitch/winbindd_util.c ---- samba-3.0.10.orig/source/nsswitch/winbindd_util.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/nsswitch/winbindd_util.c 2004-12-17 03:55:30.000000000 -0800 -@@ -957,7 +957,7 @@ - SMB_STRUCT_STAT stbuf; - TDB_CONTEXT *idmap_tdb; - -- pstrcpy(idmap_name, lock_path("winbindd_idmap.tdb")); -+ pstrcpy(idmap_name, state_path("winbindd_idmap.tdb")); - - if (!file_exist(idmap_name, &stbuf)) { - /* nothing to convert return */ -diff -uNr samba-3.0.10.orig/source/param/loadparm.c samba-3.0.10/source/param/loadparm.c ---- samba-3.0.10.orig/source/param/loadparm.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/param/loadparm.c 2004-12-17 03:55:30.000000000 -0800 -@@ -104,6 +104,9 @@ - char *szAddPrinterCommand; - char *szDeletePrinterCommand; - char *szOs2DriverMap; -+#ifdef FHS_COMPATIBLE -+ char *szLockDirStub; -+#endif - char *szLockDir; - char *szPidDir; - char *szRootdir; -@@ -1105,8 +1108,13 @@ - {"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE}, - {"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, - {"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, -+#ifdef FHS_COMPATIBLE -+ {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+ {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+#else - {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_ADVANCED}, - {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_HIDE}, -+#endif - {"pid directory", P_STRING, P_GLOBAL, &Globals.szPidDir, NULL, NULL, FLAG_ADVANCED}, - #ifdef WITH_UTMP - {"utmp directory", P_STRING, P_GLOBAL, &Globals.szUtmpDir, NULL, NULL, FLAG_ADVANCED}, -diff -uNr samba-3.0.10.orig/source/passdb/pdb_tdb.c samba-3.0.10/source/passdb/pdb_tdb.c ---- samba-3.0.10.orig/source/passdb/pdb_tdb.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/passdb/pdb_tdb.c 2004-12-17 03:55:30.000000000 -0800 -@@ -734,10 +734,7 @@ - if (location) { - tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, location); - } else { -- pstring tdbfile; -- get_private_directory(tdbfile); -- pstrcat(tdbfile, "/"); -- pstrcat(tdbfile, PASSDB_FILE_NAME); -+ char *tdbfile = state_path(PASSDB_FILE_NAME); - tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, tdbfile); - } - -diff -uNr samba-3.0.10.orig/source/passdb/secrets.c samba-3.0.10/source/passdb/secrets.c ---- samba-3.0.10.orig/source/passdb/secrets.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/passdb/secrets.c 2004-12-17 03:55:30.000000000 -0800 -@@ -55,8 +55,7 @@ - if (tdb) - return True; - -- pstrcpy(fname, lp_private_dir()); -- pstrcat(fname,"/secrets.tdb"); -+ pstrcpy(fname, state_path("secrets.tdb")); - - tdb = tdb_open_log(fname, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - -diff -uNr samba-3.0.10.orig/source/printing/nt_printing.c samba-3.0.10/source/printing/nt_printing.c ---- samba-3.0.10.orig/source/printing/nt_printing.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/nt_printing.c 2004-12-17 03:55:31.000000000 -0800 -@@ -298,28 +298,28 @@ - - if (tdb_drivers) - tdb_close(tdb_drivers); -- tdb_drivers = tdb_open_log(lock_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_drivers = tdb_open_log(state_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_drivers) { - DEBUG(0,("nt_printing_init: Failed to open nt drivers database %s (%s)\n", -- lock_path("ntdrivers.tdb"), strerror(errno) )); -+ state_path("ntdrivers.tdb"), strerror(errno) )); - return False; - } - - if (tdb_printers) - tdb_close(tdb_printers); -- tdb_printers = tdb_open_log(lock_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_printers = tdb_open_log(state_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_printers) { - DEBUG(0,("nt_printing_init: Failed to open nt printers database %s (%s)\n", -- lock_path("ntprinters.tdb"), strerror(errno) )); -+ state_path("ntprinters.tdb"), strerror(errno) )); - return False; - } - - if (tdb_forms) - tdb_close(tdb_forms); -- tdb_forms = tdb_open_log(lock_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_forms = tdb_open_log(state_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_forms) { - DEBUG(0,("nt_printing_init: Failed to open nt forms database %s (%s)\n", -- lock_path("ntforms.tdb"), strerror(errno) )); -+ state_path("ntforms.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.10.orig/source/printing/printing.c samba-3.0.10/source/printing/printing.c ---- samba-3.0.10.orig/source/printing/printing.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/printing.c 2004-12-17 03:55:31.000000000 -0800 -@@ -177,8 +177,8 @@ - int services = lp_numservices(); - int snum; - -- unlink(lock_path("printing.tdb")); -- pstrcpy(printing_path,lock_path("printing")); -+ unlink(cache_path("printing.tdb")); -+ pstrcpy(printing_path,cache_path("printing")); - mkdir(printing_path,0755); - - /* handle a Samba upgrade */ -diff -uNr samba-3.0.10.orig/source/printing/printing_db.c samba-3.0.10/source/printing/printing_db.c ---- samba-3.0.10.orig/source/printing/printing_db.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/printing/printing_db.c 2004-12-17 03:55:31.000000000 -0800 -@@ -89,7 +89,7 @@ - DLIST_ADD(print_db_head, p); - } - -- pstrcpy(printdb_path, lock_path("printing/")); -+ pstrcpy(printdb_path, cache_path("printing/")); - pstrcat(printdb_path, printername); - pstrcat(printdb_path, ".tdb"); - -diff -uNr samba-3.0.10.orig/source/registry/reg_db.c samba-3.0.10/source/registry/reg_db.c ---- samba-3.0.10.orig/source/registry/reg_db.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/registry/reg_db.c 2004-12-17 03:55:31.000000000 -0800 -@@ -198,12 +198,12 @@ - if ( tdb_reg ) - return True; - -- if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) -+ if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) - { -- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if ( !tdb_reg ) { - DEBUG(0,("init_registry: Failed to open registry %s (%s)\n", -- lock_path("registry.tdb"), strerror(errno) )); -+ state_path("registry.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.10.orig/source/rpc_server/srv_srvsvc_nt.c samba-3.0.10/source/rpc_server/srv_srvsvc_nt.c ---- samba-3.0.10.orig/source/rpc_server/srv_srvsvc_nt.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/rpc_server/srv_srvsvc_nt.c 2004-12-17 03:55:31.000000000 -0800 -@@ -133,10 +133,10 @@ - - if (share_tdb && local_pid == sys_getpid()) - return True; -- share_tdb = tdb_open_log(lock_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ share_tdb = tdb_open_log(state_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!share_tdb) { - DEBUG(0,("Failed to open share info database %s (%s)\n", -- lock_path("share_info.tdb"), strerror(errno) )); -+ state_path("share_info.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.10.orig/source/sam/idmap_tdb.c samba-3.0.10/source/sam/idmap_tdb.c ---- samba-3.0.10.orig/source/sam/idmap_tdb.c 2004-12-17 03:50:09.000000000 -0800 -+++ samba-3.0.10/source/sam/idmap_tdb.c 2004-12-17 03:55:31.000000000 -0800 -@@ -487,7 +487,7 @@ - BOOL tdb_is_new = False; - - /* use the old database if present */ -- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); -+ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); - if (!tdbfile) { - DEBUG(0, ("idmap_init: out of memory!\n")); - return NT_STATUS_NO_MEMORY; -diff -uNr samba-3.0.10.orig/source/smbd/lanman.c samba-3.0.10/source/smbd/lanman.c ---- samba-3.0.10.orig/source/smbd/lanman.c 2004-12-17 03:50:10.000000000 -0800 -+++ samba-3.0.10/source/smbd/lanman.c 2004-12-17 03:55:31.000000000 -0800 -@@ -969,9 +969,9 @@ - BOOL local_list_only; - int i; - -- lines = file_lines_load(lock_path(SERVER_LIST), NULL); -+ lines = file_lines_load(cache_path(SERVER_LIST), NULL); - if (!lines) { -- DEBUG(4,("Can't open %s - %s\n",lock_path(SERVER_LIST),strerror(errno))); -+ DEBUG(4,("Can't open %s - %s\n",cache_path(SERVER_LIST),strerror(errno))); - return(0); - } - -diff -uNr samba-3.0.10.orig/source/utils/net_idmap.c samba-3.0.10/source/utils/net_idmap.c ---- samba-3.0.10.orig/source/utils/net_idmap.c 2004-12-17 03:50:10.000000000 -0800 -+++ samba-3.0.10/source/utils/net_idmap.c 2004-12-17 03:55:32.000000000 -0800 -@@ -126,7 +126,7 @@ - return NT_STATUS_UNSUCCESSFUL; - } - -- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); -+ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); - if (!tdbfile) { - DEBUG(0, ("idmap_init: out of memory!\n")); - return NT_STATUS_NO_MEMORY; -diff -uNr samba-3.0.10.orig/source/wrepld/process.c samba-3.0.10/source/wrepld/process.c ---- samba-3.0.10.orig/source/wrepld/process.c 2004-12-17 03:50:10.000000000 -0800 -+++ samba-3.0.10/source/wrepld/process.c 2004-12-17 03:55:32.000000000 -0800 -@@ -197,7 +197,7 @@ - { - TDB_CONTEXT *tdb; - -- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); -+ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); - if (!tdb) { - DEBUG(2,("get_our_last_id: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); - return; -@@ -489,7 +489,7 @@ - } - - -- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); -+ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); - if (!tdb) { - DEBUG(2,("send_entry_request: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); - return; -diff -uNr samba-3.0.11.orig/source/printing/nt_printing.c samba-3.0.11/source/printing/nt_printing.c ---- samba-3.0.11.orig/source/printing/nt_printing.c 2005-03-23 02:51:08.000000000 -0800 -+++ samba-3.0.11/source/printing/nt_printing.c 2005-03-23 02:54:33.000000000 -0800 -@@ -2065,7 +2065,7 @@ - close_all_print_db(); - - if (geteuid() == 0) { -- pstrcpy(printdb_path, lock_path("printing/")); -+ pstrcpy(printdb_path, cache_path("printing/")); - pstrcat(printdb_path, sharename); - pstrcat(printdb_path, ".tdb"); - diff --git a/packaging/Debian/debian-unstable/patches/installswat.sh.patch b/packaging/Debian/debian-unstable/patches/installswat.sh.patch deleted file mode 100644 index 81e3dcd444..0000000000 --- a/packaging/Debian/debian-unstable/patches/installswat.sh.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- samba-3.0.1/source/script/installswat.sh.orig 2004-01-13 13:43:42.000000000 -0500 -+++ samba-3.0.1/source/script/installswat.sh 2004-01-13 12:56:49.000000000 -0500 -@@ -114,7 +114,11 @@ - - # Install Using Samba book (but only if it is there) - --if [ "x$BOOKDIR" != "x" -a -f $SRCDIR../docs/htmldocs/using_samba/toc.html ]; then -+# Under Debian we don't actually install the book. The book is part of -+# the samba-doc package, so we just provide a symlink that points to -+# where the book is actually installed. The symlink is created in -+# debian/rules. -+if /bin/false; then - - # Create directories - diff --git a/packaging/Debian/debian-unstable/patches/make-distclean.patch b/packaging/Debian/debian-unstable/patches/make-distclean.patch deleted file mode 100644 index e859575290..0000000000 --- a/packaging/Debian/debian-unstable/patches/make-distclean.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -uNr samba-3.0.7.orig/source/Makefile.in samba-3.0.7/source/Makefile.in ---- samba-3.0.7.orig/source/Makefile.in 2004-10-25 10:06:08.000000000 -0700 -+++ samba-3.0.7/source/Makefile.in 2004-10-25 10:03:31.000000000 -0700 -@@ -1371,6 +1371,7 @@ - - python_clean: - @-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi -+ @-rm -rf build/ - - # revert to the previously installed version - revert: -@@ -1437,6 +1438,7 @@ - @rm -f include/proto.h include/build_env.h include/wrepld_proto.h \ - nsswitch/winbindd_proto.h web/swat_proto.h \ - client/client_proto.h utils/net_proto.h \ -+ utils/ntlm_auth_proto.h \ - smbd/build_options.c - - MKPROTO_SH = $(srcdir)/script/mkproto.sh -@@ -1512,6 +1514,7 @@ - - distclean: realclean - -rm -f include/stamp-h -+ -rm -f script/gen-8bit-gap.sh smbadduser - -rm -f include/config.h Makefile - -rm -f config.status config.cache so_locations - -rm -rf .deps TAGS diff --git a/packaging/Debian/debian-unstable/patches/nmbd-signalling.patch b/packaging/Debian/debian-unstable/patches/nmbd-signalling.patch deleted file mode 100644 index ca04cce3bf..0000000000 --- a/packaging/Debian/debian-unstable/patches/nmbd-signalling.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c ---- samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c 2002-11-26 20:54:19.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c 2002-12-16 23:34:13.000000000 -0600 -@@ -214,12 +214,16 @@ - extern struct in_addr loopback_ip; - - if(num_interfaces == 0) { -+ void (*old_handler)(int); -+ - DEBUG(0,("create_subnets: No local interfaces !\n")); - DEBUG(0,("create_subnets: Waiting for an interface to appear ...\n")); -+ old_handler = CatchSignal( SIGTERM, SIGNAL_CAST SIG_DFL ); - while (iface_count() == 0) { - sleep(5); - load_interfaces(); - } -+ CatchSignal( SIGTERM, SIGNAL_CAST old_handler ); - } - - num_interfaces = iface_count(); diff --git a/packaging/Debian/debian-unstable/patches/non-linux-ports.patch b/packaging/Debian/debian-unstable/patches/non-linux-ports.patch deleted file mode 100644 index bd523d6ba3..0000000000 --- a/packaging/Debian/debian-unstable/patches/non-linux-ports.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -uNr samba-3.0.11.orig/source/configure.in samba-3.0.11/source/configure.in ---- samba-3.0.11.orig/source/configure.in 2005-03-23 02:39:11.000000000 -0800 -+++ samba-3.0.11/source/configure.in 2005-03-23 02:43:01.000000000 -0800 -@@ -573,6 +573,15 @@ - fi - ;; - -+# Systems with LFS support. -+# -+ gnu* | k*bsd*-gnu) -+ CPPFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE $CPPFLAGS" -+ AC_DEFINE(_LARGEFILE64_SOURCE, 1, [Whether to enable large file support]) -+ AC_DEFINE(_FILE_OFFSET_BITS, 64, [File offset bits]) -+ AC_DEFINE(_GNU_SOURCE, 1, [Whether to use GNU libc extensions]) -+ ;; -+ - # Tests for linux LFS support. Need kernel 2.4 and glibc2.2 or greater support. - # - *linux*) -@@ -1040,7 +1049,7 @@ - # - # - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - # glibc <= 2.3.2 has a broken getgrouplist - AC_TRY_RUN([ - #include <unistd.h> -@@ -1172,7 +1181,10 @@ - - # and these are for particular systems - case "$host_os" in -- *linux*) AC_DEFINE(LINUX,1,[Whether the host os is linux]) -+ linux*-gnu* | gnu* | k*bsd*-gnu) -+ case "$host_os" in linux*) -+ AC_DEFINE(LINUX,1,[Whether the host os is linux]) ;; -+ esac - BLDSHARED="true" - if test "${ac_cv_gnu_ld_no_default_allow_shlib_undefined}" = "yes"; then - LDSHFLAGS="-shared -Wl,-Bsymbolic -Wl,--allow-shlib-undefined" -@@ -4044,7 +4056,7 @@ - AC_MSG_RESULT(yes); - - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - AC_CACHE_CHECK([for linux sendfile64 support],samba_cv_HAVE_SENDFILE64,[ - AC_TRY_LINK([#include <sys/sendfile.h>], - [\ -@@ -4722,10 +4722,10 @@ - WINBIND_NSS_LDSHFLAGS=$LDSHFLAGS - - case "$host_os" in -- *linux*) -+ linux*-gnu* | gnu* | k*bsd*-gnu) - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_linux.o" - ;; -- *freebsd[[5-9]]*) -+ freebsd5*|*freebsd[[6-9]]*) - # FreeBSD winbind client is implemented as a wrapper around - # the Linux version. - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_freebsd.o \ diff --git a/packaging/Debian/debian-unstable/patches/nonpic-libsmbclient.patch b/packaging/Debian/debian-unstable/patches/nonpic-libsmbclient.patch deleted file mode 100644 index 55e8be0d15..0000000000 --- a/packaging/Debian/debian-unstable/patches/nonpic-libsmbclient.patch +++ /dev/null @@ -1,26 +0,0 @@ -diff -uNr samba-3.0.14a.orig/source/Makefile.in samba-3.0.14a/source/Makefile.in ---- samba-3.0.14a.orig/source/Makefile.in 2005-06-08 05:53:54.000000000 -0700 -+++ samba-3.0.14a/source/Makefile.in 2005-06-08 05:55:21.000000000 -0700 -@@ -1000,9 +1000,9 @@ - $(KRB5LIBS) $(LDAP_LIBS) \ - @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR) - --bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS) -+bin/libsmbclient.a: $(LIBSMBCLIENT_OBJS) - @echo Linking libsmbclient non-shared library $@ -- @-$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS) -+ @-$(AR) -rc $@ $(LIBSMBCLIENT_OBJS) - - # This is probably wrong for anything other than the GNU linker. - bin/libbigballofmud.@SHLIBEXT@: $(LIBBIGBALLOFMUD_PICOBJS) -@@ -1251,8 +1251,8 @@ - @echo "Linking shared library $@" - @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc $(LDAP_LIBS) $(KRB5LIBS) - --bin/libmsrpc.a: $(LIBMSRPC_PICOBJ) -- @-$(AR) -rc $@ $(LIBMSRPC_PICOBJ) -+bin/libmsrpc.a: $(LIBMSRPC_OBJ) -+ @-$(AR) -rc $@ $(LIBMSRPC_OBJ) - - bin/tdbbackup@EXEEXT@: $(TDBBACKUP_OBJ) bin/.dummy - @echo Linking $@ diff --git a/packaging/Debian/debian-unstable/patches/samba.patch b/packaging/Debian/debian-unstable/patches/samba.patch deleted file mode 100644 index f4c8ca8742..0000000000 --- a/packaging/Debian/debian-unstable/patches/samba.patch +++ /dev/null @@ -1,64 +0,0 @@ -diff -uNr samba-3.0.0beta1.orig/source/client/smbmount.c samba-3.0.0beta1/source/client/smbmount.c ---- samba-3.0.0beta1.orig/source/client/smbmount.c 2003-06-07 12:57:32.000000000 -0500 -+++ samba-3.0.0beta1/source/client/smbmount.c 2003-06-30 20:12:22.000000000 -0500 -@@ -766,7 +766,7 @@ - *lp = 0; - pstrcpy(password,lp+1); - got_pass = True; -- memset(strchr_m(opteq+1,'%')+1,'X',strlen(password)); -+ memset(strchr_m(opteq+1,'%')+1,'\0',strlen(password)); - } - if ((lp=strchr_m(username,'/'))) { - *lp = 0; -@@ -776,7 +776,7 @@ - !strcmp(opts, "password")) { - pstrcpy(password,opteq+1); - got_pass = True; -- memset(opteq+1,'X',strlen(password)); -+ memset(opteq+1,'\0',strlen(password)); - } else if(!strcmp(opts, "credentials")) { - pstrcpy(credentials,opteq+1); - } else if(!strcmp(opts, "netbiosname")) { -@@ -890,7 +902,7 @@ - *p = 0; - pstrcpy(password,p+1); - got_pass = True; -- memset(strchr_m(getenv("USER"),'%')+1,'X',strlen(password)); -+ memset(strchr_m(getenv("USER"),'%')+1,'\0',strlen(password)); - } - strupper_m(username); - } -diff -uNr samba-3.0.0beta1.orig/source/web/diagnose.c samba-3.0.0beta1/source/web/diagnose.c ---- samba-3.0.0beta1.orig/source/web/diagnose.c 2003-06-07 12:57:41.000000000 -0500 -+++ samba-3.0.0beta1/source/web/diagnose.c 2003-06-30 20:12:22.000000000 -0500 -@@ -66,6 +66,7 @@ - static struct cli_state cli; - extern struct in_addr loopback_ip; - -+ loopback_ip.s_addr = htonl((127 << 24) + 1); - if (!cli_initialise(&cli)) - return False; - ---- samba-3.0.1/source/script/installbin.sh.orig 2003-10-10 14:08:36.000000000 -0400 -+++ samba-3.0.1/source/script/installbin.sh 2003-12-17 10:51:45.000000000 -0500 -@@ -24,12 +24,14 @@ - chmod $INSTALLPERMS $BINDIR/$p2 - - # this is a special case, mount needs this in a specific location -- if [ $p2 = smbmount ]; then -- if [ ! -d $DESTDIR/sbin ]; then -- mkdir $DESTDIR/sbin -- fi -- ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs -- fi -+# Commented out for the Debian Samba package. We take care of this -+# important symlink in debian/rules. (peloy@debian.org) -+# if [ $p2 = smbmount ]; then -+# if [ ! -d $DESTDIR/sbin ]; then -+# mkdir $DESTDIR/sbin -+# fi -+# ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs -+# fi - done - - diff --git a/packaging/Debian/debian-unstable/patches/smbclient-pager.patch b/packaging/Debian/debian-unstable/patches/smbclient-pager.patch deleted file mode 100644 index 3ee85d4118..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbclient-pager.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -uNr samba-2.999+3.0cvs20020906.orig/source/include/local.h samba-2.999+3.0cvs20020906/source/include/local.h ---- samba-2.999+3.0cvs20020906.orig/source/include/local.h 2002-09-04 14:13:06.000000000 -0500 -+++ samba-2.999+3.0cvs20020906/source/include/local.h 2002-09-08 14:19:24.000000000 -0500 -@@ -109,7 +109,7 @@ - /* the default pager to use for the client "more" command. Users can - override this with the PAGER environment variable */ - #ifndef PAGER --#define PAGER "more" -+#define PAGER "/usr/bin/pager" - #endif - - /* the size of the uid cache used to reduce valid user checks */ diff --git a/packaging/Debian/debian-unstable/patches/smbclient-tar.patch.unused b/packaging/Debian/debian-unstable/patches/smbclient-tar.patch.unused deleted file mode 100644 index e2a4c3ce2c..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbclient-tar.patch.unused +++ /dev/null @@ -1,43 +0,0 @@ -diff -uNr samba-3.0.0beta2.orig/source/client/client.c samba-3.0.0beta2/source/client/client.c ---- samba-3.0.0beta2.orig/source/client/client.c 2003-07-01 22:36:24.000000000 -0500 -+++ samba-3.0.0beta2/source/client/client.c 2003-07-06 15:17:36.000000000 -0500 -@@ -2773,6 +2773,7 @@ - int opt; - pstring query_host; - BOOL message = False; -+ char* tar_args = NULL; - extern char tar_type; - pstring term_code; - static const char *new_name_resolve_order = NULL; -@@ -2816,7 +2817,7 @@ - max_protocol = interpret_protocol(poptGetOptArg(pc), max_protocol); - break; - case 'T': -- if (!tar_parseargs(argc, argv, poptGetOptArg(pc), optind)) { -+ if (!(tar_args = poptGetOptArg(pc))) { - poptPrintUsage(pc, stderr, 0); - exit(1); - } -@@ -2917,6 +2917,22 @@ - pstrcpy(cmdline_auth_info.password,poptGetArg(pc)); - } - -+ /* The tar command may take a number of string options; pass -+ everything we have left to tar_parseargs(). */ -+ if (tar_args) { -+ const char **argv2 = poptGetArgs(pc); -+ int argc2 = 0; -+ -+ if (argv2) { -+ while (argv2[argc2]) argc2++; -+ } -+ -+ if (!tar_parseargs(argc2, argv2, tar_args, 0)) { -+ poptPrintUsage(pc, stderr, 0); -+ exit(1); -+ } -+ } -+ - init_names(); - - if(new_name_resolve_order) diff --git a/packaging/Debian/debian-unstable/patches/smbmount-mtab-flags.patch b/packaging/Debian/debian-unstable/patches/smbmount-mtab-flags.patch deleted file mode 100644 index dac999dd63..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbmount-mtab-flags.patch +++ /dev/null @@ -1,15 +0,0 @@ -diff -ur samba-2.2.4.orig/source/client/smbmnt.c samba-2.2.4/source/client/smbmnt.c ---- samba-2.2.4.orig/source/client/smbmnt.c Sun Apr 8 15:22:51 2001 -+++ samba-2.2.4/source/client/smbmnt.c Sun May 5 16:42:29 2002 -@@ -259,7 +259,10 @@ - ment.mnt_fsname = share_name ? share_name : "none"; - ment.mnt_dir = mount_point; - ment.mnt_type = "smbfs"; -- ment.mnt_opts = ""; -+ if (mount_ro) -+ ment.mnt_opts = "ro"; -+ else -+ ment.mnt_opts = "rw"; - ment.mnt_freq = 0; - ment.mnt_passno= 0; - diff --git a/packaging/Debian/debian-unstable/patches/smbmount-nomtab.patch b/packaging/Debian/debian-unstable/patches/smbmount-nomtab.patch deleted file mode 100644 index f7e9ce4f69..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbmount-nomtab.patch +++ /dev/null @@ -1,160 +0,0 @@ -diff -uNr samba-3.0alpha22.orig/source/client/smbmnt.c samba-3.0alpha22/source/client/smbmnt.c ---- samba-3.0alpha22.orig/source/client/smbmnt.c 2003-03-15 12:11:39.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmnt.c 2003-03-15 12:11:49.000000000 -0600 -@@ -28,6 +28,7 @@ - static uid_t mount_uid; - static gid_t mount_gid; - static int mount_ro; -+static int no_mtab; - static unsigned mount_fmask; - static unsigned mount_dmask; - static int user_mount; -@@ -40,6 +41,7 @@ - printf("Usage: smbmnt mount-point [options]\n"); - printf("Version %s\n\n",VERSION); - printf("-s share share name on server\n" -+ "-n don't update /etc/mtab\n" - "-r mount read-only\n" - "-u uid mount as uid\n" - "-g gid mount as gid\n" -@@ -54,7 +56,7 @@ - { - int opt; - -- while ((opt = getopt (argc, argv, "s:u:g:rf:d:o:")) != EOF) -+ while ((opt = getopt (argc, argv, "s:u:g:nrf:d:o:")) != EOF) - { - switch (opt) - { -@@ -71,6 +73,9 @@ - mount_gid = strtol(optarg, NULL, 0); - } - break; -+ case 'n': -+ no_mtab = 1; -+ break; - case 'r': - mount_ro = 1; - break; -@@ -274,36 +279,38 @@ - return -1; - } - -- if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -- { -- fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -- return 1; -- } -- close(fd); -+ if (!no_mtab) { -+ if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -+ { -+ fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -+ return 1; -+ } -+ close(fd); - -- if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -- { -- fprintf(stderr, "Can't open " MOUNTED); -- return 1; -- } -+ if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -+ { -+ fprintf(stderr, "Can't open " MOUNTED); -+ return 1; -+ } - -- if (addmntent(mtab, &ment) == 1) -- { -- fprintf(stderr, "Can't write mount entry"); -- return 1; -- } -- if (fchmod(fileno(mtab), 0644) == -1) -- { -- fprintf(stderr, "Can't set perms on "MOUNTED); -- return 1; -- } -- endmntent(mtab); -+ if (addmntent(mtab, &ment) == 1) -+ { -+ fprintf(stderr, "Can't write mount entry"); -+ return 1; -+ } -+ if (fchmod(fileno(mtab), 0644) == -1) -+ { -+ fprintf(stderr, "Can't set perms on "MOUNTED); -+ return 1; -+ } -+ endmntent(mtab); - -- if (unlink(MOUNTED"~") == -1) -- { -- fprintf(stderr, "Can't remove "MOUNTED"~"); -- return 1; -- } -+ if (unlink(MOUNTED"~") == -1) -+ { -+ fprintf(stderr, "Can't remove "MOUNTED"~"); -+ return 1; -+ } -+ } - - return 0; - } -diff -uNr samba-3.0alpha22.orig/source/client/smbmount.c samba-3.0alpha22/source/client/smbmount.c ---- samba-3.0alpha22.orig/source/client/smbmount.c 2003-03-15 12:04:29.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmount.c 2003-03-15 12:15:10.000000000 -0600 -@@ -48,6 +48,7 @@ - static int mount_ro; - static unsigned mount_fmask; - static unsigned mount_dmask; -+static BOOL no_mtab = False; - static BOOL use_kerberos; - /* TODO: Add code to detect smbfs version in kernel */ - static BOOL status32_smbfs = False; -@@ -273,6 +274,9 @@ - return; - } - -+ if (no_mtab) -+ return; -+ - if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) { - DEBUG(0,("%d: Can't get "MOUNTED"~ lock file", sys_getpid())); - return; -@@ -467,6 +471,9 @@ - args[i++] = "-s"; - args[i++] = svc2; - -+ if (no_mtab) { -+ args[i++] = "-n"; -+ } - if (mount_ro) { - args[i++] = "-r"; - } -@@ -662,7 +669,7 @@ - ****************************************************************************/ - static void usage(void) - { -- printf("Usage: mount.smbfs service mountpoint [-o options,...]\n"); -+ printf("Usage: mount.smbfs service mountpoint [-n] [-o options,...]\n"); - - printf("Version %s\n\n",VERSION); - -@@ -740,8 +747,13 @@ - argc -= 2; - argv += 2; - -- opt = getopt(argc, argv, "o:"); -- if(opt != 'o') { -+ opt = getopt(argc, argv, "no:"); -+ if (opt == 'n') { -+ DEBUG(3,("No mtab!\n")); -+ no_mtab = True; -+ opt = getopt(argc, argv, "o:"); -+ } -+ if (opt != 'o') { - return; - } - diff --git a/packaging/Debian/debian-unstable/patches/smbmount-unix-caps.patch b/packaging/Debian/debian-unstable/patches/smbmount-unix-caps.patch deleted file mode 100644 index 0c81327987..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbmount-unix-caps.patch +++ /dev/null @@ -1,14 +0,0 @@ -diff -uNr samba-3.0.14a.orig/source/client/smbmount.c samba-3.0.14a/source/client/smbmount.c ---- samba-3.0.14a.orig/source/client/smbmount.c 2005-06-02 06:49:31.000000000 -0700 -+++ samba-3.0.14a/source/client/smbmount.c 2005-06-02 06:59:41.000000000 -0700 -@@ -213,6 +213,10 @@ - c->capabilities &= ~CAP_STATUS32; - c->force_dos_errors = True; - } -+ /* For now, respect requests for uid-flattening mount options -+ by disabling Unix permissions handling in the kernel driver */ -+ if (mount_uid || mount_gid || mount_fmask || mount_dmask) -+ c->capabilities &= ~CAP_UNIX; - - if (!cli_session_setup(c, username, - password, strlen(password), diff --git a/packaging/Debian/debian-unstable/patches/smbstatus-locking.patch b/packaging/Debian/debian-unstable/patches/smbstatus-locking.patch deleted file mode 100644 index db7fccc68b..0000000000 --- a/packaging/Debian/debian-unstable/patches/smbstatus-locking.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/utils/status.c samba-2.999+3.0.alpha21/source/utils/status.c ---- samba-2.999+3.0.alpha21.orig/source/utils/status.c 2002-11-26 20:54:22.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/utils/status.c 2002-12-16 23:37:14.000000000 -0600 -@@ -686,6 +686,16 @@ - if (!shares_only) { - int ret; - -+ tdb = tdb_open_log(lock_path("locking.tdb"), 0, TDB_DEFAULT, O_RDONLY, 0); -+ -+ if (!tdb) { -+ d_printf("%s not initialised\n", lock_path("locking.tdb")); -+ d_printf("This is normal if an SMB client has never connected to your server.\n"); -+ exit(0); -+ } else { -+ tdb_close(tdb); -+ } -+ - if (!locking_init(1)) { - d_printf("Can't initialise locking module - exiting\n"); - exit(1); diff --git a/packaging/Debian/debian-unstable/patches/undefined-symbols.patch b/packaging/Debian/debian-unstable/patches/undefined-symbols.patch deleted file mode 100644 index e9a376ea9b..0000000000 --- a/packaging/Debian/debian-unstable/patches/undefined-symbols.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff -uNr samba-3.0.11.orig/source/Makefile.in samba-3.0.11/source/Makefile.in ---- samba-3.0.11.orig/source/Makefile.in 2005-03-23 02:40:40.000000000 -0800 -+++ samba-3.0.11/source/Makefile.in 2005-03-23 02:48:59.000000000 -0800 -@@ -631,7 +631,8 @@ - $(RPC_ECHO_OBJ) $(SMBLDAP_OBJ) $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) - - WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \ -- $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) -+ $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) \ -+ $(SECRETS_OBJ) - - WINBIND_WINS_NSS_PICOBJS = $(WINBIND_WINS_NSS_OBJ:.o=.@PICSUFFIX@) - -@@ -997,7 +998,7 @@ - - bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS) - @echo Linking libsmbclient shared library $@ -- @$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ -+ @$(SHLD) $(LDSHFLAGS) -Wl,-z,defs -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ - $(KRB5LIBS) $(LDAP_LIBS) \ - @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR) - diff --git a/packaging/Debian/debian-unstable/po/POTFILES.in b/packaging/Debian/debian-unstable/po/POTFILES.in deleted file mode 100644 index 95a7ea8150..0000000000 --- a/packaging/Debian/debian-unstable/po/POTFILES.in +++ /dev/null @@ -1,3 +0,0 @@ -[type: gettext/rfc822deb] samba-common.templates -[type: gettext/rfc822deb] samba.templates -[type: gettext/rfc822deb] swat.templates diff --git a/packaging/Debian/debian-unstable/po/ca.po b/packaging/Debian/debian-unstable/po/ca.po deleted file mode 100644 index 7489613d2d..0000000000 --- a/packaging/Debian/debian-unstable/po/ca.po +++ /dev/null @@ -1,320 +0,0 @@ -# samba (debconf) translation to Catalan. -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -# Aleix Badia i Bosch <abadia@ica.es> 2004 -# -msgid "" -msgstr "" -"Project-Id-Version: samba_3.0.0beta2-1_templates\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2004-03-13 21:32-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Debian L10n Catalan <debian-l10n-catalan@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Joc de caràcters pel sistema de fitxers de Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"El fitxer smb.conf actual té configurat un \"character set\". En la versió " -"3.0 de Samba, aquesta opció es reemplaça per l'opció \"unix charset\". " -"Especifiqueu el joc de caràcters que voleu utilitzar per a aquesta nova " -"opció que controla el mode que el Samba interpreta els noms de fitxers del " -"sistema de fitxers." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Si deixeu aquesta opció en blanc no es modificarà el smb.conf." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Joc de caràcters pels clients DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"El fitxer smb.conf actual té configurat un \"client code page\". En la " -"versió 3.0 de Samba, aquesta opció es reemplaça per l'opció \"dos charset\". " -"L'opció per defecte és suficient en la majoria del casos. Recordeu que " -"aquesta opció no és necessària pel suport dels clients de Windows, només és " -"pels clients de DOS. Si deixeu aquesta opció en blanc no es canviarà el smb." -"conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"Voleu modificar el smb.conf perquè utilitza els paràmetres de configuració " -"del WINS del DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si el vostre ordinador obté la informació referent a la IP a través d'un " -"servidor de DHCP, aquest també li donarà informació sobre els servidors de " -"WINS (\"servidors de nom de NetBIOS\") presents a la xarxa. Aquesta opció " -"precisa d'una modificació del fitxer smb.conf per tal que els paràmetres de " -"WINS obtinguts a través del DHCP s'obtinguin a través de la lectura de /etc/" -"samba/dhcp.conf" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Per beneficiar-vos d'aquesta característica cal que tingueu instal·lat el " -"paquet dhcp3-client." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Voleu configurar el smb.conf a través del debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"La resta de la configuració del Samba tracta amb qüestions que afecten els " -"paràmetres del fitxer de configuració els programes de Samba /etc/samba/smb." -"conf. La versió actual del smb.conf conté una línia 'include' o una opció " -"que abarca múltiples línies que podria confondre al debconf i precisa de la " -"seva edició manual per poder-lo fer funcionar de nou." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si no utilitzeu el debconf per configurar el smb.conf, haureu de gestionar " -"manualment qualsevol canvi de la configuració, i no us podreu beneficiar de " -"les millores. La seva utilització és recomenable en cas que sigui possible." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Grup de treball/nom del domini?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Aquesta opció defineix en quin grup de treball apareixerà el vostre servidor " -"quan ho consultin els clients. Recordeu que aquest paràmetre també controla " -"el nom de domini utilitzat pel paràmetre de configuració security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Voleu utilitzar l'encriptació de contrasenyes?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Els clients de Windows més recents es comuniquen amb els servidors de Samba " -"utilitzant contrasenyes encriptades. Si voleu utilitzar contrasenyes amb " -"text pla, haureu de modificar el vostre registre de Windows. És recomanable " -"utilitzar contrasenyes encriptades. Si ho feu, assegureu-vos de tenir un " -"fitxer /etc/samba/smbpasswd vàlid i que hi especifiqueu la contrasenya de " -"cada usuari utilitzant l'ordre smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" -"Es crea la base de dades de contrasenyes de Samba, /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"El Samba s'ha de configurar perquè utilitzi contrasenyes encriptades per tal " -"que sigui compatible amb la majoria de versions de Windows per defecte. Això " -"implica que les contrasenyes d'usuari s'emmagatzemin a un fitxer diferent " -"del /etc/passwd. Aquest fitxer es pot crear automàticament, però les " -"contrasenyes s'han d'afegir manualment (per vós o per l'usuari) executant " -"l'ordre smbpasswd i cal que us organitzeu per tenir-lo actualitzat en un " -"futur. Si no el creeu, haureu de reconfigurar el Samba (i probablement els " -"vostres ordinadors clients) per tal que utilitzin contrasenyes de text pla. " -"Per més informació feu una ullada a /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html del paquet samba-doc." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "S'han desplaçat els fitxers de registre de Samba." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Els fitxers de registre dels dos dimonis de Samba (nmbd i smbd) es desen a /" -"var/log/samba des de la primera versió dels paquets de Samba 2.2 per Debian. " -"Els noms dels fitxers són, respectivament, log.nmbd i log.smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Els fitxers de registre antics que estaven a /var/log/ es desplacen a la " -"nova ubicació." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'execució del nmbd a través del inetd ja no estarà suportada." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"El vostre sistema estava prèviament configurat perquè inicies el nmbd i el " -"smbd a través del inetd. A partir de la versió 2.999+3.0alpha20-4 el nmbd no " -"es pot iniciar a través del inetd. Si heu modificat la seqüència " -"d'arrencada /etc/init.d/samba, l'haureu de modificar manualment per tal que " -"s'iniciï com a dimoni." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "dimonis, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Com voleu executar el Samba?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"El dimoni de Samba pot executar-se com un dimoni normal o des del inetd. És " -"recomanable executar-lo com un dimoni." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Es desplaça etc/samba/smbpasswd a /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"El Samba 3.0 introdueix una interfície de base de dades de SAM més nova i " -"completa que reemplaça el fitxer /etc/samba/smbpassd. Voleu que es migri el " -"fitxer smbpasswd a /var/lib/samba/passdb.tdb? Si la vostra intenció és " -"utilitzar un altre pdb (ex, LDAP), haurieu de respondre 'no' aquí." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "El vostre smb.conf es reescriurà" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"El SWAT reescriurà el vostre fitxer smb.conf. Reorganitzarà les entrades i " -"suprimirà els comentaris i les opcions include= i copy=. Si teniu un smb." -"conf molt elaborat feu una còpia de seguretat o no utilitzeu el SWAT." diff --git a/packaging/Debian/debian-unstable/po/cs.po b/packaging/Debian/debian-unstable/po/cs.po deleted file mode 100644 index 903606af05..0000000000 --- a/packaging/Debian/debian-unstable/po/cs.po +++ /dev/null @@ -1,318 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2004-03-05 12:04+0100\n" -"Last-Translator: Miroslav Kure <kurem@debian.cz>\n" -"Language-Team: Czech <provoz@debian.cz>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-2\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Znaková sada pro unixový souborový systém" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Momentálnì máte ve svém smb.conf nastavenou volbu \"character set\". V Sambì " -"3.0 je tato volba nahrazena volbou \"unix charset\". Zadejte, prosím, " -"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Tímto nastavíte, jak má " -"Samba interpretovat názvy souborù v souborovém systému." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Pokud nezadáte nic, vá¹ smb.conf se nezmìní." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Znaková sada pro DOSové klienty." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Momentálnì máte ve svém smb.conf nastavenou volbu \"client code page\". V " -"Sambì 3.0 je tato volba nahrazena volbou \"dos charset\". Zadejte, prosím, " -"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Ve vìt¹inì pøípadù " -"postaèuje implicitní hodnota. Tato volba není potøebná pro Windowsové " -"klienty, pouze pro DOSové klienty. Pokud nezadáte nic, vá¹ smb.conf se " -"nezmìní." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Upravit smb.conf, aby pou¾íval WINS nastavení z DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Pokud vá¹ poèítaè získává IP adresu z DHCP serveru, mù¾ete vám tento server " -"nabízet také informace o WINS serverech (jmenných serverech NetBIOSu), které " -"jsou dostupné ve va¹í síti. To vy¾aduje zásah do souboru smb.conf, kde se " -"nastaví, aby se informace o WINS serverech naèítaly ze souboru /etc/samba/" -"dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Pro vyu¾ití této vlastnosti musíte mít nainstalovaný balík dhcp3-client." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Konfigurovat smb.conf pøes debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Zbytek konfigurace Samby se zabývá otázkami, které mìní parametry v /etc/" -"samba/smb.conf, co¾ je soubor pou¾ívaný pro nastavení programù nmbd a smbd " -"(dohromady tvoøí Sambu). Vá¹ stávající smb.conf obsahuje øádek 'include' " -"nebo volbu, která se táhne pøes více øádkù, co¾ mù¾e zmást debconf a mù¾e " -"zpùsobit, ¾e pro znovuzprovoznìní Samby budete muset upravit smb.conf ruènì." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Pokud pro konfiguraci smb.conf nepou¾íváte debconf, budete muset zvládnout " -"v¹echna nastavení sami a nebudete moci vyu¾ívat výhod pravidelných vylep¹ení " -"tohoto souboru. Z tohoto pohledu je pou¾ití debconf doporuèená volba." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Skupina/Doménové jméno?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Zde mù¾ete zadat jméno skupiny, do které má server patøit. Tímto parametrem " -"také nastavíte doménové jméno pou¾ívané s nastavením security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Pou¾ít ¹ifrování hesel?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Souèasní windowsoví klienti pou¾ívají pøi komunikaci se SMB servery " -"za¹ifrovaná hesla. Pokud chcete pou¾ít hesla neza¹ifrovaná, musíte zmìnit " -"jeden parametr v registrech systému Windows. Doporuèujeme pou¾ívat " -"za¹ifrovaná hesla. Hesla mù¾ete jednotlivým u¾ivatelùm pøidat pøíkazem " -"smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Vytvoøit databázi hesel /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Pro dosa¾ení co nejvìt¹í kompatibility s vìt¹inou verzí systému Windows musí " -"být Samba nastavena, aby pou¾ívala ¹ifrovaná hesla. To vy¾aduje, aby byla " -"hesla uchována mimo souboru /etc/passwd. Po¾adovaný soubor mù¾ete nechat " -"vytvoøit automaticky, ale hesla do nìj musí být pøidána ruènì programem " -"smbpasswd (buï vámi, nebo u¾ivatelem) a také jej musíte udr¾ovat " -"aktualizovaný. Pokud jej nevytvoøíte, budete muset nastavit Sambu (a " -"pravdìpodobnì také klienty), aby pou¾ívala ne¹ifrovaná hesla. Podrobnosti " -"naleznete v /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html z balíku samba-" -"doc." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Logovací soubory Samby se pøesunuly." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Od prvních debianích balíèkù Samby verze 2.2 jsou logovací soubory obou " -"serverù (nmbd a smbd) umístìny ve /var/log/samba/. Názvy pøíslu¹ných souborù " -"jsou log.nmbd a log.smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Staré soubory z adresáøe /var/log/ budou pøesunuty na nové místo automaticky." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Spou¹tìní nmbd z inetd ji¾ není podporováno" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Vá¹ systém byl pùvodnì nastaven, aby spou¹tìl nmbd a smbd z inetd. Od verze " -"2.999+3.0.alpha20-4 ji¾ nelze nmbd spou¹tìt z inetd. Pokud jste si upravili " -"startovací skript /etc/init.d/samba, mo¾ná jej nyní budete muset upravit pro " -"korektní start nmbd." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "démoni, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Jak chcete spou¹tìt Sambu?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Server Samby smbd mù¾e bì¾et jako obyèejný démon (doporuèeno), nebo se mù¾e " -"spou¹tìt z inetd." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Pøesunout /etc/samba/smbpasswd do /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 zavedla nové, kompletnìj¹í rozhraní k SAM databázi, je¾ pøekonává " -"pùvodní soubor /etc/samba/smbpasswd. Chcete pøevést stávající soubor " -"smbpasswd na /var/lib/samba/passwd.tdb? Pokud plánujete pou¾ít jinou pdb " -"databázi (tøeba LDAP), mìli byste odponìdìt 'ne'." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Vá¹ smb.conf bude pøepsán!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT pøepí¹e vá¹ soubor smb.conf. Mj. pøeskládá polo¾ky a sma¾e v¹echny " -"komentáøe a volby include= a copy=. Pokud máte pracnì odladìný smb.conf, tak " -"si jej zazálohujte, nebo nepou¾ívejte SWAT!" diff --git a/packaging/Debian/debian-unstable/po/da.po b/packaging/Debian/debian-unstable/po/da.po deleted file mode 100644 index 42d22569b1..0000000000 --- a/packaging/Debian/debian-unstable/po/da.po +++ /dev/null @@ -1,317 +0,0 @@ -# translation of da.po to Danish -# translation of samba Debian debconf template to Danish -# Claus Hindsgaul <claus_h@image.dk>, 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: da\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2004-02-15 17:23+0100\n" -"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n" -"Language-Team: Danish <dansk@klid.dk>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.0.2\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Tegnsæt til Unix-filsystemet" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Du har en \"character set\"-indstilling i din smb.conf. I Samba 3.0 " -"erstattes denne af en ny indstilling, \"unix charset\". Angiv det tegnsæt, " -"du ønsker at bruge i denne nye indstilling, som styrer hvordan Samba tolker " -"filnavne pÃ¥ systemet." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Hvis du ikke skriver noget her, vil din smb.conf ikke blive ændret." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Tegnsæt til DOS-klienter" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Du har en \"client code page\"-indstilling i din smb.conf. I Samba 3.0 " -"erstattes denne af en ny indstilling, \"dos charset\". Angiv det tegnsæt, du " -"ønsker at bruge i denne nye indstilling. I de fleste tilfælde vil det " -"forvalgte være nok. Bemærk at denne indstilling ikke kræves for at " -"understøtte Windows-klienter; den gælder kun DOS-klienter. Hvis du ikke " -"skriver noget her, vil smb.conf ikke blive ændret." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Ret smb.conf, sÃ¥ den benytter WINS-indstillinger fra DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Hvis din computer fÃ¥r IP-adresseoplysninger fra en DHCP-server pÃ¥ netværket, " -"kan DHCP-serveren ogsÃ¥ give oplysninger om WINS-servere (\"NetBIOS " -"navneservere\") pÃ¥ netværket. Dette kræver en ændring i din smb.conf-fil, sÃ¥ " -"WINS-indstillingerne fra DHCP-serveren automatisk indlæses fra /etc/samba/" -"dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Ud skal have pakken dhcp3-client installeret for at kunne udnytte denne " -"funktion." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Sæt smb.conf op med debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Resten af Samba-opsætningen drejer sig om spørgsmÃ¥l om indstillingerne i " -"filen /etc/samba/smb.conf, som benyttes til at sætte Samba-programmerne " -"(nmbd og smbd) op. Din nuværende smb.conf indeholder en 'include'-linje " -"eller en indstilling, der fylder flere linjer, hvilket kan forvirre debconf " -"og kræve at du redigerer din smb.conf selv for at fÃ¥ Samba til at fungere " -"igen." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Hvis du ikke bruger debconf til at sætte smb.conf op, mÃ¥ du selv hÃ¥ndtere " -"ændringer i opsætningen, og vil ikke kunne drage nytte af de løbende " -"forbedringer i opsætningen. Derfor anbefales brugen af debconf, hvis det er " -"muligt." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Navn pÃ¥ arbejdsgruppe/domæne?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Dette styrer hvilken arbejdsgruppe din server til tilhøre, nÃ¥r den bliver " -"spurgt af klienter. Bemærk at dette ogsÃ¥ styrer det domænenavn, der bruges " -"med indstillingen \"security=domain\"." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Kryptér adgangskoder?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Nyere Windows-klienter kommunikerer med SMB-servere med krypterede " -"adgangskoder. Hvis du vil bruge adgangkoder i klar tekst, bliver du nødt til " -"at ændre en indstilling i Windows' registreringsdatabase. Det anbefales at " -"du bruger krypterede adgangskoder. Hvis du gør, sÃ¥ sørg for at du har en " -"gyldig /etc/samba/smbpasswd-fil og at du her angiver adgangskoder for hver " -"bruger med kommandoen smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Opret samba-adgangskodedatabasen /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"For at være kompatibel med standardindstillingerne i de fleste udgaver af " -"Windows, skal Samba være sat op til at benytte krypterede adgangskoder. Det " -"kræver at brugernes adgangskoder gemmes i en anden fil end /etc/passwd. " -"Denne fil kan oprettes automatisk, men adgangskoderne er nødt til at blive " -"tilføjet manuelt (af dig eller af brugeren) ved at køre smbpasswd, og du " -"skal holde den opdateret i fremtiden. Hvis du ikke opretter den, er du nødt " -"til at sætte samba (og sikkert ogsÃ¥ dine klientmaskiner) op til at benytte " -"adgangskoder i klar tekst. Se /usr/share/doc/samba-doc/htmldocs/ENCRYPTION." -"html i pakken samba-doc for flere detaljer." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Sambas logfiler er flyttet." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Fra og med de første Samba 2.2-Debianpakker, bliver begge Samba-dæmonernes " -"(nmbd og smbd) logfiler gemt i /var/log/samba/. Filernes navne er log.nmbd " -"og log.smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De gamle logfiler, der var i /var/log vil blive flyttet til den nye " -"placering for dig." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Kørsel af nmbd fra inetd understøttes ikke længere." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Dit system var tidligere sat op til at starte nmbd og smbd fra inetd. Fra og " -"med version 2.999+3.0.alpha20-4 kan nmbd ikke længere startes med inetd. " -"Hvis du har rettet din opstartsskript /etc/init.d/samba, kan du være nødt " -"til at justere det manuelt nu, sÃ¥ nmbd bliver startet." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "dæmoner, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hvordan skal Samba køres?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba-dæmonen smbd kan køre som en almindelig dæmon eller fra inetd. Det " -"anbefales at køre den som dæmon." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Flyt /etc/samba/smbpasswd til /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 har en nyere og mere komplet SAM-databasegrænseflade, som " -"erstatter filen /etc/samba/smbpasswd. Vil du have din eksisterende smbpasswd-" -"fil overført til /var/lib/samba/passdb.tdb?`Hvis du i stedet planlægger at " -"bruge en anden pdb-hÃ¥ndtering (f.eks. LDAP), bør du afvise dette." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Din smb.conf vil blive omskrevet!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT vil overskrive din smb.conf-fil. Den vil flytte rundt pÃ¥ linjerne og " -"slette alle kommentarer, og linjer med \"include=\" og \"copy=\". Hvis du " -"har brugt tid pÃ¥ at lave din egen smb.conf, sÃ¥ tag en sikkerhedskopi eller " -"undlad at benytte SWAT!" diff --git a/packaging/Debian/debian-unstable/po/de.po b/packaging/Debian/debian-unstable/po/de.po deleted file mode 100644 index 81a9e3c6aa..0000000000 --- a/packaging/Debian/debian-unstable/po/de.po +++ /dev/null @@ -1,350 +0,0 @@ -# translation of samba_3.0.14a-6.de.po to German -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans# -# Developers do not need to manually edit POT or PO files. -# Martin Krüger <mkrueger@mkru.de>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: samba_3.0.14a-6.de\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2005-08-18 08:18+0200\n" -"Last-Translator: Martin Krüger <mkrueger@mkru.de>\n" -"Language-Team: German <debian-l10n-german@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-15\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.11\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Zeichensatz für Unix-Dateisystem" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. " -"In Samba 3.0, this option is replaced by a new option, \"unix charset" -"\". Please specify the character set you wish to use for theis new " -"option, which controls how Samba interprets filenames on the file " -"system." -msgstr "" -"Sie haben zurzeit ein \"character set\" in Ihrer smb.conf angegeben. In " -"Samba 3.0 wurde die Option durch die neue Option \"unix charset\" " -"ersetzt. Bitte geben Sie einen Zeichensatz an, den Sie verwenden " -"wollen. Dieser bestimmt, wie Samba Dateinamen auf dem Dateisystem " -"interpretiert." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Wenn Sie diese Option leer lassen, wird Ihre smb.conf nicht verändert." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Zeichensatz für DOS-Clients" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In " -"Samba 3.0, this option is replaced by the option \"dos charset\". " -"Please specify the character set you wish to use for this new " -"option. In most cases, the default chosen for you will be " -"sufficient. Note that this option is not needed to support Windows " -"clients, it is only for DOS clients. If you leave this option blank, " -"your smb.conf will not be changed." -msgstr "" -"Zurzeit haben Sie \"client code page\" in Ihrer smb.conf angegeben. " -"In Samba 3.0 wird diese Option durch die Option \"dos charset\" " -"ersetzt. Bitte geben Sie den Zeichensatz an, den Sie für die neue " -"Option benutzen wollen. In den meisten Fällen ist der standardmäßig " -"gewählte Zeichensatz ausreichend. Bemerkung: Diese Option ist nur " -"für das Betreiben von DOS-Clients notwendig, nicht für Windows-" -"Clients. Wenn Sie diese Option leer lassen, wird Ihre smb.conf nicht " -"verändert." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"Soll smb.conf so abgeändert werden, dass WINS-Einstellungen von DHCP " -"übernommen werden?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on " -"the network, the DHCP server may also provide information about WINS " -"servers (\"NetBIOS name servers\") present on the network. This " -"requires a change to your smb.conf file so that DHCP-provided WINS " -"settings will automatically be read from /etc/samba/dhcp.conf." -msgstr "" -"Wenn Ihr Computer IP-Adress-Informationen von einem DHCP-Server " -"bezieht, dann kann es sein, dass auch Informationen über WINS-Server " -"zur Verfügung gestellt werden, sollten solche Server im Netzwerk " -"vorhanden sein. Eine automatische Konfiguration von Samba mit diesen " -"ermittelten Werten ist möglich, erfordert aber eine Änderung der smb." -"conf. Damit würden automatisch die WINS-Einstellungen aus der Datei /" -"etc/samba/dhcp.conf übernommen." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of " -"this feature." -msgstr "" -"Sie müssen das Paket dhcp3-client installiert haben, um dieses " -"Feature nutzen zu können." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Soll smb.conf durch debconf konfiguriert werden?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that " -"affect parameters in /etc/samba/smb.conf, which is the file used to " -"configure the Samba programs (nmbd and smbd.) Your current smb.conf " -"contains an 'include' line or an option that spans multiple lines, " -"which could confuse debconf and require you to edit your smb.conf by " -"hand to get it working again." -msgstr "" -"Ihre aktuelle smb.conf enthält mindestens eine 'include'-Zeile oder " -"mindestens eine mehrzeilige Option. Dies kann zu einer fehlerhaft " -"generierten smb.conf-Datei führen. Es kann daher nötig werden, dass " -"Sie Ihre smb.conf manuell korrigieren müssen, um den ordnungsgemäßen " -"Betrieb von Samba zu gewährleisten." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to " -"handle any configuration changes yourself, and will not be able to " -"take advantage of periodic configuration enhancements. Therefore, " -"use of debconf is recommended if possible." -msgstr "" -"Wenn Sie debconf nicht zur Konfiguration der smb.conf benutzen, " -"werden Sie jede Änderung an der Konfiguration manuell vornehmen " -"müssen. Erweiterungen der Konfiguration - in neueren Versionen - " -"werden nicht automatisch in smb.conf einfließen. Daher ist das " -"Benutzen von debconf empfohlen, falls möglich." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Arbeitsgruppe/Domain Name?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when " -"queried by clients. Note that this parameter also controls the Domain " -"name used with the security=domain setting." -msgstr "" -"Diese Einstellung gibt an, in welcher Arbeitsgruppe dieser Server bei " -"Anfragen erscheint. Bemerkung: Dieser Parameter setzt auch den " -"Domain Name, welcher in der Option security=domain verwendet wird." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Verschlüsselte Passwörter verwenden?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to " -"change a parameter in your Windows registry. It is recommended that " -"you use encrypted passwords. If you do, make sure you have a valid /" -"etc/samba/smbpasswd file and that you set passwords in there for each " -"user using the smbpasswd command." -msgstr "" -"Neuere Windows-Versionen kommunizieren mit SMB-Servern und benutzen " -"dabei verschlüsselte Passworte. Wenn Sie Passworte im Klartext " -"verwenden wollen, dann müssen Sie einen bestimmten Parameter in der " -"Windows Registry ändern. Es ist empfohlen verschlüsselte Passwörter " -"zu verwenden. Falls Sie verschlüsselte Passwörter verwenden, stellen " -"Sie sicher, dass Sie eine gültige /etc/samba/smbpasswd-Datei haben " -"und dass die Passworte für jeden User mit dem Samba-Hilfsprogramm " -"smbpasswd gesetzt wurden." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" -"Samba-Passwort-Datenbank in /var/lib/samba/passdb.tdb erstellen?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba " -"must be configured to use encrypted passwords. This requires user " -"passwords to be stored in a file separate from /etc/passwd. This file " -"can be created automatically, but the passwords must be added " -"manually (by you or the user) by running smbpasswd, and you must " -"arrange to keep it up-to-date in the future. If you do not create " -"it, you will have to reconfigure samba (and probably your client " -"machines) to use plaintext passwords. See /usr/share/doc/samba-doc/" -"htmldocs/ENCRYPTION.html from the samba-doc package for more details." -msgstr "" -"Um mit den neusten Versionen von Windows kompatibel zu sein, muss " -"Samba mit verschlüsselten Passwörtern konfiguriert werden. Dies " -"zwingt jedoch dazu, die Benutzer-Passwörter in einer anderen Datei " -"als /etc/passwd zu speichern. Diese andere Datei kann automatisch " -"erzeugt werden, jedoch müssen die Passwörter manuell ergänzt werden " -"(von Ihnen oder dem Benutzer) durch das Ausführen von smbpasswd. " -"Zusätzlich müssen Vorkehrungen getroffen werden, die Passwörter in " -"Zukunft aktuell zu halten. Wenn Sie die Datei nicht erstellen, müssen " -"Sie Samba anders konfigurieren (und möglicherweise die Clients auch), " -"um unverschlüsselte Passwörter zu benutzen. Siehe /usr/share/doc/" -"samba-doc/htmldocs/ENCRYPTION.html des Pakets samba-doc für weitere " -"Details." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Sambas Log-Dateien wurden verschoben." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log " -"files for both Samba daemons (nmbd and smbd) are now stored in /var/" -"log/samba/. The names of the files are log.nmbd and log.smbd, for " -"nmbd and smbd respectively." -msgstr "" -"Beginnend mit den ersten Paketen von Samba 2.2 für Debian befinden " -"sich die Log-Dateien für beide Samba-Prozesse (nmbd und smbd) jetzt " -"in /var/log/samba/. Die Namen der Dateien sind log.nmbd und log.smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new " -"location for you." -msgstr "" -"Die alten Log-Dateien, welche in /var/log/ waren, werden für Sie in " -"das neue Verzeichnis verschoben." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Starten von nmbd über inetd wird nicht mehr unterstützt" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from " -"inetd. As of version 2.999+3.0.alpha20-4, nmbd will no longer be " -"started from inetd. If you have modified your /etc/init.d/samba " -"startup script, you may need to adjust it by hand now so that nmbd " -"will start." -msgstr "" -"Ihr System war zuvor so konfiguriert, dass es nmbd und smbd über " -"inetd startete. Seit Version 2.999+3.0.alpha20-4 wird nmbd nicht " -"länger über inetd gestartet. Sollten Sie Ihr Startup-Skript /etc/init." -"d/samba abgeändert haben, müssen Sie für einen korrekten Start von " -"nmbd möglicherweise manuelle Korrekturen vornehmen." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Wie wollen Sie Samba starten?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. " -"Running as a daemon is the recommended approach." -msgstr "" -"Der Samba-Prozess smbd kann als normaler Hintergrunddienst (Daemon) " -"laufen oder über inetd gestartet werden. Ersteres wird jedoch " -"empfohlen." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" -"Soll /etc/samba/smbpasswd nach /var/lib/samba/passdb.tdb verschoben " -"werden?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface " -"which supersedes the /etc/samba/smbpasswd file. Would you like your " -"existing smbpasswd file to be migrated to /var/lib/samba/passdb.tdb " -"for you? If you plan to use another pdb backend (e.g., LDAP) " -"instead, you should answer 'no' here." -msgstr "" -"Samba 3.0 führt eine neue, komplexere SAM-Datenbank-Schnittstelle ein, " -"welche die Datei /etc/samba/smbpasswd ablöst. Wollen Sie Ihre " -"bestehende smbpasswd-Datei nach /var/lib/samba/passdb.tdb migrieren? " -"Wenn Sie planen ein anderes pdb-Backend (z.B. LDAP) zu verwenden, " -"sollten Sie hier mit 'Nein' antworten." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Ihre smb.conf wird überschrieben!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries " -"and delete all comments, include= and copy= options. If you have a " -"carefully crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT wird Ihre smb.conf überschreiben. Es wird die Einträge " -"umorganisieren und alle Kommentare, sowie die Optionen include= und " -"copy=, löschen. Wenn Sie eine mühsam erstellte smb.conf haben, machen " -"Sie eine Datensicherung oder benutzen Sie SWAT nicht!" diff --git a/packaging/Debian/debian-unstable/po/es.po b/packaging/Debian/debian-unstable/po/es.po deleted file mode 100644 index a34544bed5..0000000000 --- a/packaging/Debian/debian-unstable/po/es.po +++ /dev/null @@ -1,327 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2003-07-02 21:51-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Juego de caracteres para el sistema de ficheros Unix" - -# -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Actualmente hay una opción de \"character set\" en smb.conf. En Samba 3.0 " -"esta opción ha sido reemplazado por una opción nueva: \"unix charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción nueva, " -"que controla cómo Samba interpretará los nombres en el sistema de ficheros." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Si deja en blanco este campo, no se cambiará smb.conf." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Juego de caracteres para los clientes DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Actualmente hay una opción de \"client code page\" en smb.conf. En Samba " -"3.0 esta opción ha sido reemplazado por la opción \"dos charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción " -"nueva. Esta opción no se necesita en absoluto para clientes Windows; es " -"exclusivamente para los clientes DOS. Si deja en blanco este campo, no se " -"cambiará smb.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"¿Modificar smb.conf para usar la configuración WINS que proviene de DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si su sistema recibe la dirección IP desde un servidor DHCP en la red, el " -"servidor DHCP también puede proveerle informaciones sobre los servidores de " -"WINS que haya en la red. Esto requiere un cambio en el fichero smb.conf " -"para que la configuración de WINS proveniente de DHCP se lea automaticamente " -"de /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Hay que instalar el paquete dhcp3-client para aprovechar esta funcionalidad." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "¿Configurar smb.conf mediante debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"El resto de la configuración de Samba trata sobre cuestiones que afectan al " -"contenido de /etc/samba/smb.conf, que es el fichero utilizado para " -"configurar los programas de Samba (nmbd y smbd). Su smb.conf actual contiene " -"una lÃnea 'include' o una opción que atraviesa más de una lÃnea, asà que " -"debconf puede dejarlo con un smb.conf descompuesto, requiriendo que lo " -"arregle a mano." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si no usa debconf para configurar smb.conf, tendrá que cuidar a mano " -"cualquier cambio a la configuración de Samba y no disfrutará de aumentos " -"periódicos de configuración. Por eso se recomienda el uso de debconf cuando " -"sea posible." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nombre del dominio o del grupo de trabajo" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Es el grupo de trabajo en el que aparecerá su servidor cuando se lo " -"pregunten los clientes de la red. Este parámetro también controla el nombre " -"de dominio que se usa con la configuración security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "¿Utilizar contraseñas cifradas?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Los clientes Windows más modernos se comunican con los servidores SMB " -"utilizando contraseñas cifradas. Si quiere usar contraseñas en texto plano, " -"tendrá que cambiar un parámetro en el registro de Windows. Es muy " -"recomendable usar cifrado en las contraseñas. Si elige hacerlo, compruebe " -"que tiene un fichero /etc/samba/smbpasswd válido y que ha puesto las " -"contraseñas con el programa smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "¿Crear el base de dados de contraseñas /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para manterner la compatibilidad con el comportamiento por defecto de la " -"mayoria de los sistemas Windows, hay que configurar Samba para que use " -"contraseñas cifradas, lo cual requiere la creación de un fichero, distinto " -"del /etc/passwd, donde se guarden las contraseñas de los usuarios. El " -"fichero se puede crear automaticamente, aunque es necesario añadir las " -"contraseñas manualmente (por usted o por el usuario) mediante el programa " -"'smbpasswd', y debe encargarse de mantener las contraseñas al dÃa. Si no " -"crea este fichero, es imprescindible configurar Samba (y posiblemente los " -"sistemas Windows) para que use contraseñas no cifradas. Véa /usr/share/doc/" -"samba-doc/htmldocs/ENCRYPTION.html del paquete samba-doc para más " -"información." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Se han cambiado de lugar los ficheros de registro de Samba." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"A partir de los primeros paquetes Debian de Samba 2.2, los ficheros de " -"registro de los dos demonios del Samba (nmbd y smbd) se encuentran en /var/" -"log/samba/. Los nombres de estos ficheros son log.nmbd y log.smbd, para " -"nmbd y smbd respectivamente." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Los ficheros de registro antiguos que habÃa en /var/log se moverán " -"automáticamente a su nueva ubicación." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Ya no se puede ejecutar nmbd desde el inetd" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Su sistema estaba configurado anteriormente para ejectuar nmbd y smbd desde " -"inetd. A partir de la version 2.999+3.0.alpha20-4, nmbd ya no se ejecuta " -"desde inetd. Si ha modificado el script de arranque /etc/init.d/samba, " -"puede que tenga que editarlo ahora para que nmbd se ejecute." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "demonios, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "¿Cómo quiere que se ejecute Samba?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"El servicio Samba smbd puede ejecutarse como demonio normal o desde el " -"inetd. Se recomienda que se ejecute como demonio independiente." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" -"¿Convertir el fichero /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -#, fuzzy -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"La versión 3.0 de Samba introduce un nuevo base de dados \"SAM\" más " -"completo que suplanta al fichero /etc/samba/smbpasswd. ¿Quiere que el " -"fichero corriente smbpasswd sea convertido en /var/lib/samba/passdb.tdb? Si " -"pretende usar otro " - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "¡Se sobrescribirá su configuración smb.conf!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-unstable/po/fr.po b/packaging/Debian/debian-unstable/po/fr.po deleted file mode 100644 index daf4e8c029..0000000000 --- a/packaging/Debian/debian-unstable/po/fr.po +++ /dev/null @@ -1,330 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2003-07-02 21:52-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: French <debian-l10n-french@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-15\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Jeu de caractères pour les systèmes de fichiers Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Une instruction « character set » (jeu de caractères) est utilisée dans " -"votre fichier smb.conf. Avec Samba 3.0, cette option est remplacée par une " -"nouvelle option, « unix charset » (jeu de caractères Unix). Veuillez " -"indiquer le jeu de caractères que vous voulez utiliser avec cette option, " -"qui permet d'interpréter les noms de fichiers sur le système." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Le fichier smb.conf ne sera pas modifié si vous laissez cette option sans " -"réponse." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Jeu de caractères pour les clients DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Votre fichier smb.conf contient une option « client code page » (page de " -"codes du client). Avec Samba 3.0, cette option a été remplacée par l'option " -"« dos charset » (jeu de caractères DOS). Veuillez indiquer le jeu de " -"caractères que vous voulez utiliser avec la nouvelle option. En général le " -"jeu de caractères choisi par défaut est suffisant. Veuillez noter que cette " -"option ne sert pas pour les clients Windows mais seulement pour les clients " -"DOS. Le fichier smb.conf ne sera pas modifié si vous laissez cette option " -"sans réponse. " - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modifier smb.conf pour utiliser les paramètres WINS fournis par DHCP ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si votre ordinateur obtient ses paramètres IP à partir d'un serveur DHCP du " -"réseau, ce serveur peut aussi fournir des informations sur les serveurs WINS " -"(serveurs de noms NetBIOS) présents sur le réseau. Une modification du " -"fichier smb.conf est nécessaire afin que les réglages WINS fournis par le " -"serveur DHCP soient lus dans /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "Pour cela, le paquet dhcp3-client doit être installé." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Voulez-vous configurer smb.conf avec debconf ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"La suite de la configuration de Samba pose des questions sur des paramètres " -"de /etc/samba/smb.conf, le fichier utilisé pour configurer les programmes de " -"Samba (nmbd et smbd). Votre fichier actuel contient une ligne « include » ou " -"une option qui s'étale sur plusieurs lignes : cela peut perturber debconf et " -"il vaut mieux gérer manuellement le contenu de ce fichier." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si vous n'utilisez pas debconf pour configurer smb.conf, vous devrez vous-" -"même gérer les modifications de configuration et vous ne pourrez pas " -"bénéficier des améliorations faites dans la configuration. Si possible, il " -"est conseillé d'utiliser debconf." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Groupe de travail et nom de domaine ?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Ce paramètre indique le groupe de travail où les clients trouveront le " -"serveur. Il indique aussi le nom de domaine utilisé par le paramètre " -"« security=domain »." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Voulez-vous chiffrer les mots de passe ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Des clients Windows récents communiquent avec les serveurs SMB en utilisant " -"des mots de passe chiffrés. Si vous voulez utiliser des mots de passe sans " -"chiffrement, vous devez modifier un paramètre dans le registre de Windows. " -"Il est recommandé d'utiliser des mots de passe chiffrés. Si vous le faites, " -"n'oubliez pas de créer un fichier /etc/samba/smbpasswd et d'y mettre les " -"mots de passe de tous les utilisateurs qui se servent de la commande " -"smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Faut-il créer une base de données /var/lib/samba/passdb.tdb ?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Pour préserver la compatibilité avec le comportement par défaut de la " -"plupart des systèmes Windows, Samba doit utiliser les mots de passe " -"chiffrés. Cela exige la création d'un fichier, distinct du fichier /etc/" -"passwd, pour mettre les mots de passe des utilisateurs. Ce fichier peut être " -"créé automatiquement, mais quelqu'un (vous ou l'utilisateur) devra ajouter " -"les mots de passe manuellement en utilisant la commande smbpasswd ; et vous " -"devrez maintenir à jour ce fichier. Si vous ne voulez pas créer le fichier " -"maintenant, Samba (et peut-être les ordinateurs Windows) devra utiliser des " -"mots de passe non chiffrés. Voyez /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html dans le paquet samba-doc pour plus de détails." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Les fichiers-journaux de Samba ont changé de place." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"À partir des premiers paquets de Samba 2.2 pour Debian, les fichiers-" -"journaux des démons nmbd et smbd se trouvent dans /var/log/samba/. Les noms " -"de ces fichiers sont log.nmbd et log.smbd pour, respectivement, nmbd et smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Les anciens fichiers-journaux dans /var/log/ seront mis au bon endroit." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'utilisation de nmbd à partir d'inetd n'est plus supportée" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Votre système lançait nmbd et smbd à partir d'inetd. Depuis la version 2.999" -"+3.0.alpha20-4, on ne peut plus exécuter nmbd à partir d'inetd. Si vous avez " -"modifié le script de lancement /etc/init.d/samba, vous avez peut-être besoin " -"de le corriger manuellement pour permettre le lancement de nmbd. " - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "démons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Comment voulez-vous lancer Samba ?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Le service de Samba smbd peut s'exécuter en tant que démon classique ou bien " -"être lancé par inetd. L'approche recommandée est qu'il s'exécute en tant que " -"démon." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Faut-il convertir /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb ?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Avec Samba 3.0, une nouvelle interface pour les bases de données SAM, plus " -"complète, vient remplacer le fichier /etc/samba/smbpasswd. Voulez-vous que " -"votre fichier existant soit remplacé par /var/lib/samba/passdb.tdb ? Si vous " -"envisagez d'utiliser une autre interface d'authentification (p.ex. LDAP), " -"refusez la proposition maintenant." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Ré-écriture de votre fichier smb.conf !" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT va modifier votre fichier smb.conf. Les entrées seront réorganisées et " -"les commentaires détruits ainsi que les entrées « include = » et « copy = ». " -"Si votre smb.conf était soigneusement construit, sauvegardez-le ou " -"n'utilisez pas SWAT !" diff --git a/packaging/Debian/debian-unstable/po/it.po b/packaging/Debian/debian-unstable/po/it.po deleted file mode 100644 index 37b206aad0..0000000000 --- a/packaging/Debian/debian-unstable/po/it.po +++ /dev/null @@ -1,314 +0,0 @@ -# samba po-debconf translation to italian
-# Copyright (C) 2004 Software in the Public Interest
-# This file is distributed under the same license as the samba package.
-# Luca Monducci, 2004.
-#
-msgid "" -msgstr "" -"Project-Id-Version: samba 3.0.7 debconf templates\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2004-12-03 21:10+0100\n" -"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n" -"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Set di caratteri per il filesystem Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Attualmente in smb.conf è configurato il «character set», in Samba 3.0, " -"questa opzione è sostituita da una nuova opzione «unix character». " -"Specificare il set di caratteri che si desidera usare per questa opzione che " -"controlla come Samba interpreta i nomi dei file sul file system." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Lasciando vuoto questo valore smb.conf non verrà modificato." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Set di caratteri per i client DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Attualmente in smb.conf è configurato il «client code page», in Samba 3.0, " -"questa opzione è sostituita dall'opzione «dos character». Specificare il set " -"di caratteri che si desidera usare per questa opzione. In molti casi il " -"valore predefinito è sufficiente. Notare che questa opzione non è necessaria " -"per i client Windows, invece è specifica per i client DOS. Lasciando vuoto " -"questo valore smb.conf non verrà modificato." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modificare smb.conf per usare le impostazioni WINS da DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Se il computer prende le informazioni sull'indirizzo IP da un server DHCP " -"allora il server DHCP può fornire anche informazioni sui server WINS (i name " -"server per NetBIOS) presenti nella rete. Questo necessita una modifica al " -"file smb.conf in modo le impostazioni di WINS fornite dal DHCP siano lette " -"automaticamente da /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Deve essere installato il pacchetto dhcp3-client per usare questa " -"funzionalità ." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurare smb.conf usando debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Il resto della configurazione di Samba fa delle domande sui parametri di /" -"etc/samba/smb.conf, il file usato per configurare i programmi di Samba (nmbd " -"e smbd). L'attuale file smb.conf contiene una riga «include» o una opzione " -"che si estende su più righe: questo potrebbe confondere debconf e richiedere " -"una modifica manuale a smb.conf per renderlo nuovamente funzionante." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Se non si vuole usare usare debconf per configurare smb.conf si dovranno " -"gestire tutti i cambiamenti della configurazione da soli e non sarà " -"possibile beneficiare dei miglioramenti periodici della configurazione; se " -"possibile, si consiglia l'uso di debconf." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome del Workgroup/Dominio" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Questo imposta in quale workgroup apparirà il server quando i client " -"tenteranno l'accesso. Notare che questo parametro controlla anche il nome " -"del Dominio usato del parametro «security=domain»." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Usare password cifrate?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"I client Windows recenti comunicano con i server SMB usando password " -"cifrate. Per usare password in chiaro è necessario cambiare un parametro nel " -"registro di Windows. Si raccomanda l'uso di password cifrate. In caso " -"contrario assicurarsi che il file /etc/samba/smbpasswd sia valido e usare il " -"comando smbpasswd per inserirci le password di ciascun utente." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Creare il database delle password samba /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Per essere compatibile con le impostazioni predefinite di molte versioni di " -"Windows, Samba deve essere configurato per usare password cifrate. Questo " -"richiede che le password degli utenti siano memorizzate in un file diverso " -"da /etc/passwd. Questo file può essere creato automaticamente ma qualcuno " -"(l'amministratore o l'utente) dovrà inserire manualmente e poi tenere " -"aggiornate le password usando smbpasswd. Se non si crea questo file sarà " -"necessario riconfigurare samba (e probabilmente anche le macchine client) " -"per usare password in chiaro. Vedere /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html contenuto nel pacchetto samba-doc per ulteriori dettagli." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "I file di log di Samba sono stati spostati." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"A partire dai primi pacchetti Samba 2.2 per Debian i file di log per " -"entrambi i demoni Samba (nmbd e smbd) sono memorizzati in /var/log/samba/. I " -"nomi dei file di log sono log.nmbd e log.smbd rispettivamente per nmbd e " -"smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"I vecchi file di log in /var/log/ verranno spostati nella nuova directory." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'avvio di nmbd da inetd non è più supportato" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Il sistema è configurato per avviare nmbd e smbd da inetd. Dalla versione " -"2.999+3.0.alpha20-4 non è più possibile avviare nmbd da inetd. Se si è " -"modificato lo script di avvio /etc/init.d/samba potrebbe essere necessario " -"correggerlo a mano in modo da permettere l'avvio di nmbd." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "demoni, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Come avviare Samba?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Il demone Samba smbd può essere avviato come un normale demone oppure da " -"inetd. Si raccomanda l'avvio come demone." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Spostare /etc/samba/smbpasswd in /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 introduce una nuova e più completa interfaccia al database SAM che " -"sostituisce il file /etc/samba/smbpasswd. Si vuole che il file smbpasswd sia " -"migrato a /var/lib/samba/passdb.tdb? Se si pensa di usare un backend pdb " -"diverso (p.e. LDAP), si dovrebbe rispondere «no»." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Sovrascrittura di smb.conf!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT sovrascriverà il file smb.conf, verranno riordinate le impostazioni e " -"verranno cancellati tutti i commenti, le opzioni include= e copy=. Se si è " -"personalizzato smb.conf tornare indietro e non usare SWAT." diff --git a/packaging/Debian/debian-unstable/po/ja.po b/packaging/Debian/debian-unstable/po/ja.po deleted file mode 100644 index 1f1f50129b..0000000000 --- a/packaging/Debian/debian-unstable/po/ja.po +++ /dev/null @@ -1,321 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2003-09-09 09:26+0900\n" -"Last-Translator: Kenshi Muto <kmuto@debian.org>\n" -"Language-Team: Japanese <debian-japanese@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=EUC-JP\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Unix ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¸þ¤±¤Îʸ»ú¥»¥Ã¥È" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"character set\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢¤³" -"¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"unix charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£" -"Samba ¤¬¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¥Õ¥¡¥¤¥ë̾¤ò¤É¤Î¤è¤¦¤Ë²ò¼á¤¹¤ë¤«¤òÀ©¸æ¤¹¤ë¤³¤Î¿·¤·" -"¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "DOS ¥¯¥é¥¤¥¢¥ó¥È¸þ¤±¤Îʸ»ú¥»¥Ã¥È" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"client code page\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢" -"¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"dos charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£¤³¤Î" -"¿·¤·¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤Û¤È¤ó¤É¤Î¾ì" -"¹ç¡¢¥Ç¥Õ¥©¥ë¥È¤ÎÁªÂò¤Î¤Þ¤Þ¤Ç½½Ê¬¤Ç¤·¤ç¤¦¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï Windows ¥¯¥é¥¤¥¢¥ó" -"¥È¥µ¥Ý¡¼¥È¤Ë¤ÏɬÍפʤ¯¡¢DOS ¥¯¥é¥¤¥¢¥ó¥È¤Î¤ß¤Î¤¿¤á¤Ç¤¢¤ë¤³¤È¤òÃí°Õ¤·¤Æ¤ª¤¤Þ" -"¤¹¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "DHCP ¤«¤é WINS ÀßÄê¤ò»È¤¦¤è¤¦ smb.conf ¤òÊѹ¹¤·¤Þ¤¹¤«?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤¬¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î DHCP ¥µ¡¼¥Ð¤«¤é IP ¥¢¥É¥ì¥¹¾ðÊó¤ò¼èÆÀ" -"¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢DHCP ¥µ¡¼¥Ð¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ë¤¢¤ë WINS ¥µ¡¼¥Ð (NetBIOS " -"¥Í¡¼¥à¥µ¡¼¥Ð) ¤Ë¤Ä¤¤¤Æ¤Î¾ðÊó¤òÄ󶡤¹¤ë¤³¤È¤â¤Ç¤¤Þ¤¹¡£DHCP ¤ÇÄ󶡤µ¤ì¤ë WINS " -"ÀßÄê¤Ï /etc/samba/dhcp.conf ¤«¤é¼«Æ°Åª¤ËÆɤ߹þ¤Þ¤ì¤ë¤¿¤á¡¢smb.conf ¥Õ¥¡¥¤¥ë¤ò" -"Êѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"¤³¤Îµ¡Ç½¤ò»È¤¦¤¿¤á¤Ë¤Ï¡¢dhcp3-client ¥Ñ¥Ã¥±¡¼¥¸¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ëɬÍפ¬" -"¤¢¤ê¤Þ¤¹¡£" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "debconf ¤òÄ̤·¤Æ smb.conf ¤òÀßÄꤷ¤Þ¤¹¤«?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Samba ¤ÎÀßÄê¤Î»Ä¤ê¤ÎÉôʬ¤Ï¡¢Samba ¥×¥í¥°¥é¥à (nmbd ¤ª¤è¤Ó smbd) ¤òÀßÄꤹ¤ë¤Î" -"¤Ë»È¤¦¥Õ¥¡¥¤¥ë /etc/samba/smb.conf ¤Ë¤¢¤ë¥Ñ¥é¥á¡¼¥¿¤Ë±Æ¶Á¤¹¤ë¼ÁÌä¤Ç¤¹¡£¸½ºß" -"¤Î smb.conf ¤Ï¡¢'include' ¹Ô¤Þ¤¿¤ÏÊ£¿ô¹Ô¤Ë¤Þ¤¿¤¬¤ë¥ª¥×¥·¥ç¥ó¤ò´Þ¤ó¤Ç¤¤¤Þ¤¹¡£" -"¤³¤ì¤Ï debconf ¤òº®Í𤵤»¤ë²ÄǽÀ¤¬¤¢¤ê¡¢ºÆ¤Ó debconf ¤¬ºîÆ°¤¹¤ë¤è¤¦¤Ë¤¹¤Ù¤¯ " -"smb.conf ¤Î¼êÆ°¤Ç¤Î½¤Àµ¤òɬÍפȤ·¤Þ¤¹¡£" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"smb.conf ¤ÎÀßÄê¤Ë debconf ¤ò»È¤ï¤Ê¤¤¾ì¹ç¡¢¤¹¤Ù¤Æ¤ÎÀßÄê¤ÎÊѹ¹¤ò¤¢¤Ê¤¿¼«¿È¤¬ÌÌ" -"Åݤò¸«¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ÏÄê´üŪ¤ÊÀßÄê²þÁ±¤Ë¤Ï¸þ¤¤¤Æ¤¤¤Þ¤»¤ó¡£¤½¤Î¤¿¤á¡¢" -"²Äǽ¤Ê¤é debconf ¤ò»È¤¦¤Î¤¬¤ª´«¤á¤Ç¤¹¡£" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "¥ï¡¼¥¯¥°¥ë¡¼¥×/¥É¥á¥¤¥ó̾¤Ï²¿¤Ç¤¹¤«?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"¤³¤ì¤Ï¥¯¥é¥¤¥¢¥ó¥È¤«¤é¾È²ñ¤µ¤ì¤¿ºÝ¤Ë¤¢¤Ê¤¿¤Î¥µ¡¼¥Ð¤¬¸½¤ì¤ë¥ï¡¼¥¯¥°¥ë¡¼¥×¤òÀ©" -"¸æ¤·¤Þ¤¹¡£¤³¤Î¥Ñ¥é¥á¡¼¥¿¤Ï security=domain ÀßÄ꤬»È¤ï¤ì¤¿¤È¤¤Î¥É¥á¥¤¥ó̾¤âÀ©" -"¸æ¤·¤Þ¤¹¡£" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "¥Ñ¥¹¥ï¡¼¥É¤Î°Å¹æ²½¤ò»È¤¤¤Þ¤¹¤«?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"ºÇ¶á¤Î Windows ¥¯¥é¥¤¥¢¥ó¥È¤Ï°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ SMB ¥µ¡¼¥Ð¤È¤ä¤ê" -"¼è¤ê¤·¤Þ¤¹¡£¥¯¥ê¥¢¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¤¤¿¤¤¾ì¹ç¤Ï¡¢¤¢¤Ê¤¿¤Î Windows ¤Î¥ì¥¸" -"¥¹¥È¥ê¤Î¥Ñ¥é¥á¡¼¥¿¤òÊѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦¤³¤È" -"¤ò¿ä¾©¤·¤Þ¤¹¡£¤³¤¦¤¹¤ë¾ì¹ç¡¢Í¸ú¤Ê /etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤¬¤¢¤ë¤³¤È¤ò" -"³Îǧ¤·¡¢³Æ¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¥³¥Þ¥ó¥É¤ò»È¤Ã¤ÆÀßÄꤷ¤Þ¤¹¡£" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba ¥Ñ¥¹¥ï¡¼¥É¥Ç¡¼¥¿¥Ù¡¼¥¹ /var/lib/samba/passdb.tdb ¤òºîÀ®¤·¤Þ¤¹¤«?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Windows ¤Î¤Û¤È¤ó¤É¤Î¥Ð¡¼¥¸¥ç¥ó¤Î¥Ç¥Õ¥©¥ë¥È¤È¸ß´¹À¤òÊݤĤ¿¤á¡¢Samba ¤Ï°Å¹æ²½" -"¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤ÆÀßÄꤵ¤ì¤Þ¤¹¡£¤³¤ì¤Ï¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤ò /etc/passwd " -"¤È¤ÏÊ̤Υե¡¥¤¥ë¤Ë³ÊǼ¤¹¤ë¤³¤È¤òɬÍפȤ·¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤Ï¼«Æ°Åª¤ËºîÀ®¤¹¤ë" -"¤³¤È¤¬¤Ç¤¤Þ¤¹¤¬¡¢¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¤ò¼Â¹Ô¤·¤Æ¼êÆ°¤Ç (¤¢¤Ê¤¿¤¢¤ë¤¤¤Ï¥æ¡¼" -"¥¶¤¬) Äɲ䷤ʤ±¤ì¤Ð¤Ê¤é¤º¡¢¾Íè¤ËÅϤäƺǿ·¾õÂÖ¤òÊݤÁ³¤±¤ë¤è¤¦À°¤¨¤Æ¤ª¤¯É¬" -"Íפ¬¤¢¤ê¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤òºîÀ®¤·¤Ê¤¤¾ì¹ç¡¢¥×¥ì¥¤¥ó¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦" -"¤è¤¦ Samba (¤ª¤è¤Ó¤ª¤½¤é¤¯¤¢¤Ê¤¿¤Î¥¯¥é¥¤¥¢¥ó¥È¥Þ¥·¥ó) ¤ÎºÆÀßÄ꤬ɬÍפǤ¹¡£¾Ü" -"ºÙ¤Ë¤Ä¤¤¤Æ¤Ï¡¢samba-doc ¥Ñ¥Ã¥±¡¼¥¸¤Ë¤¢¤ë /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html ¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï°ÜÆ°¤µ¤ì¤Þ¤·¤¿¡£" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Debian ¸þ¤±¤Î Samba 2.2 ¤Î½é´ü¥Ñ¥Ã¥±¡¼¥¸¤«¤é¡¢Î¾ Samba ¥Ç¡¼¥â¥ó (nmbd ¤ª¤è¤Ó " -"smbd) ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï /var/log/samba ¤Ë³ÊǼ¤µ¤ì¤ë¤è¤¦¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¥Õ¥¡¥¤" -"¥ë̾¤Ï nmbd ¤È smbd ¤ÇÊ̸Ĥˤʤë¤è¤¦¡¢log.nmbd ¤ª¤è¤Ó log.smbd ¤È¤Ê¤ê¤Þ¤¹¡£" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "/var/log/ ¤Ë¤¢¤Ã¤¿¸Å¤¤¥í¥°¥Õ¥¡¥¤¥ë¤Ï¿·¤·¤¤¾ì½ê¤Ë°ÜÆ°¤µ¤ì¤Þ¤¹¡£" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "inetd ¤«¤é¤Î nmbd ¤Î¼Â¹Ô¤Ï¤â¤¦¥µ¥Ý¡¼¥È¤µ¤ì¤Þ¤»¤ó" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"¤¢¤Ê¤¿¤Î¥·¥¹¥Æ¥à¤Ë¤Ï inetd ¤«¤é nmbd ¤ª¤è¤Ó smbd ¤òµ¯Æ°¤¹¤ë°ÊÁ°¤ÎÀßÄ꤬¤¢¤ê¤Þ" -"¤¹¡£¥Ð¡¼¥¸¥ç¥ó 2.999+3.0.alpha20-4 °Ê¹ß¤Ç¤Ï¡¢nmbd ¤Ï inetd ¤«¤é¤Ï¤â¤¦µ¯Æ°¤·¤Þ" -"¤»¤ó¡£/etc/init.d/samba ¥¹¥¿¡¼¥È¥¢¥Ã¥×¥¹¥¯¥ê¥×¥È¤òÊѹ¹¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢" -"nmbd ¤¬µ¯Æ°¤¹¤ë¤è¤¦¼êÆ°¤ÇÄ´À°¤¹¤ëɬÍפ¬¤¢¤ë¤Ç¤·¤ç¤¦¡£" - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "¥Ç¡¼¥â¥ó, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "¤É¤Î¤è¤¦¤Ë Samba ¤ò¼Â¹Ô¤·¤¿¤¤¤Ç¤¹¤«?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba ¥Ç¡¼¥â¥ó smbd ¤ÏÄ̾ï¤Î¥Ç¡¼¥â¥ó¤È¤·¤Æ¤Î¼Â¹Ô¤Þ¤¿¤Ï inetd ¤«¤é¤Î¼Â¹Ô¤¬¤Ç¤" -"¤Þ¤¹¡£¥Ç¡¼¥â¥ó¤È¤·¤Æ¼Â¹Ô¤¹¤ë¤Î¤¬¤ª´«¤á¤Î¼êÃʤǤ¹¡£" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd ¤ò /var/lib/samba/passdb.tdb ¤Ë°ÜÆ°¤·¤Þ¤¹¤«?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 ¤Ç¤Ï¡¢/etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤ËÂå¤ï¤ë¡¢¤è¤ê¿·¤·¤¤¡¢¤è¤ê´°Á´" -"¤Ê SAM ¥Ç¡¼¥¿¥Ù¡¼¥¹¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹¤¬Æ³Æþ¤µ¤ì¤Æ¤¤¤Þ¤¹¡£´û¸¤Î smbpasswd ¥Õ¥¡" -"¥¤¥ë¤ò /var/lib/samba/passdb.tdb ¤Ë°Ü¹Ô¤·¤Þ¤¹¤«? Ê̤Πpdb ¥Ð¥Ã¥¯¥¨¥ó¥É (LDAP " -"¤Ê¤É) ¤òÂå¤ï¤ê¤Ë·×²è¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¤³¤³¤Ç¤Ï '¤¤¤¤¤¨' ¤ÈÅú¤¨¤ë¤Ù¤¤Ç¤¹¡£" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "¤¢¤Ê¤¿¤Î smb.conf ¤Ï½ñ¤Ä¾¤µ¤ì¤Þ¤¹!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT ¤Ï¤¢¤Ê¤¿¤Î smb.conf ¥Õ¥¡¥¤¥ë¤ò½ñ¤Ä¾¤·¤Þ¤¹¡£SWAT ¤Ï¥¨¥ó¥È¥ê¤òºÆÊÔÀ®¤·¡¢" -"¤¹¤Ù¤Æ¤Î¥³¥á¥ó¥È¤ª¤è¤Ó include= ¤È copy= ¥ª¥×¥·¥ç¥ó¤òºï½ü¤·¤Þ¤¹¡£¿µ½Å¤ËºîÀ®¤µ" -"¤ì¤¿ smb.conf ¤ò»ý¤Ã¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Æ¤ª¤¯¤«¡¢SWAT ¤ò»È¤ï¤Ê¤¤" -"¤Ç¤¯¤À¤µ¤¤!" diff --git a/packaging/Debian/debian-unstable/po/nl.po b/packaging/Debian/debian-unstable/po/nl.po deleted file mode 100644 index 616d3702e3..0000000000 --- a/packaging/Debian/debian-unstable/po/nl.po +++ /dev/null @@ -1,331 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2003-08-30 02:03+0100\n" -"Last-Translator: Bart Cornelis <cobaco@linux.be>\n" -"Language-Team: dutch <debian-l10n-dutch@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Karakterset voor Unix bestandsysteem" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"U heeft momenteel een \"karakterset\" ingesteld in uw smb.conf. In Samba 3.0 " -"werd deze optie vervangen door een nieuwe \"unix karakterset\" optie. " -"Gelieve de karakterset die u voor deze nieuwe optie wil gebruiken aan te " -"geven, deze bepaald hoe Samba de bestandsnamen in het bestandsysteem " -"interpreteerd." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Uw smb.conf bestand wordt niet aangepast indien u deze optie leeg laat." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Karakterset voor DOS-clients" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"U heeft momenteel een \"client code pagina\" ingesteld in uw smb.conf. In " -"Samba 3.0 werd deze optie vervangen door de optie \"dos karakterset\". " -"Gelieve de karakterset die u voor deze nieuwe optie wilt gebruiken aan te " -"geven. In de meeste gevallen zal het standaard ingevulde antwoord voldoen. " -"Merk op dat deze optie niet nodig is voor ondersteuning van Windows-clients, " -"enkel voor DOS-clients. Uw smb.conf wordt niet veranderd wanneer u deze " -"optie blank laat." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "smb.conf aanpassen om de WINS instellingen van DHCP te gebruiken?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Indien uw computer zijn ip-addres informatie van een DHCP-server op het " -"netwerk haalt, voorziet deze mogelijks ook informatie betreffende de op het " -"netwerk aanwezige WINS-servers (\"NetBIOS naam servers\").\" Dit vereist een " -"verandering aan uw smb.conf bestand, opdat de door DHCP doorgegeven WINS " -"instellingen automatisch gelezen worden van /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"U dient het dhcp3-client-pakket geïnstalleert te hebben om van deze optie " -"gebruik te maken." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configuratie in smb.conf met debconf beheren?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"De resterende Samba configuratie beslaat parameters in /etc/samba/smb.conf, " -"het configuratiebestand dat gebruikt wordt voor de Samba programmas (nmbd en " -"smbd). Uw huidige smb.conf bevat een 'include' regel of een optie die " -"meerdere regels beslaat, dit kan debconf mogelijks in verwarring brenngen. " -"Indien debconf in verwarring raakt dient u uw smb.conf handmatig aan te " -"passen om samba terug werkend te krijgen." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Indien u geen gebruik maakt van debconf voor het beheer van smb.conf dient u " -"alle configuratie instellingen zelf te doen, en zult u geen voordeel halen " -"uit de periodieke configuratie verbeteringen. Het gebruik van debconf wordt " -"dan ook aangeraden. " - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Werkgroep/Domeinnaam?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Dit bepaald van welke werkgroep uw server deel zal lijken uit te maken bij " -"het beantwoorden van vragen door clients. Merk op dat deze parameter ook de " -"domeinnaam die gebruikt wordt voor de security=domein instelling bepaald." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Wachtwoord versleuteling gebruiken?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Recente Windows clients maken gebruik van versleutelde wachtwoorden voor de " -"communicatie met SMB-servers. Indien u onversleutelde tekst wachtwoorden " -"wilt gebruiken dient u een parameter te veranderen in de Windows registry. " -"Het gebruik van versleutelde wachtwoorden wordt aangeraden. Indien u dit " -"doet zorg er dan voor dat u een geldig /etc/samba/smbpasswd bestand heeft en " -"dat u de wachtwoorden daar voor elke gebruiker met behulp van smbpasswd " -"insteld. " - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba wachtwoord database, /var/lib/samba/passdb.tdb, aanmaken?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Om compatibel te zijn met de standaard instellingen van de meeste " -"Windowsversies dient Samba gebruik te maken van versleutelde wachtwoorden. " -"Dit vereist dat de gebruikerswachtwoorden opgeslagen worden in een bestand " -"dat verschilt van /etc/passwd. Dit bestand kan automatisch aangemaakt " -"worden, maar de wachtwoorden dienen handmatig (door de gebuiker) toegevoegt " -"te worden met het smbpasswd commando. U dient dit bestand in de toekomst ook " -"aktueel te houden. Indien u dit bestand niet aanmaakt zult u samba (en naar " -"alle waarschijnlijkheid de client machines) moeten herconfigureren zodat " -"deze onversleutelde wachtwoorden gebruiken. Zie /usr/share/doc/samba-doc/" -"htmldocs/ENCRYPTION.html uit het samba-doc pakket voor meer details." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba's log bestanden zijn verhuisd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Vanaf de eerste Debian pakketten vaan Samba versie 2.2 zijn de log bestanden " -"van beide Samba daemons (nmbd en smbd) opgeslagen in /var/log/samba/. De log " -"bestanden voor nmbd en smbd zijn, respectievelijk, log.nmbd en log.smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De oude logbestanden in /var/log worden voor u naar de nieuwe locatie " -"verplaatst." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "nmbd vanuit inetd draaien wordt niet langer ondersteund" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Uw systeem was geconfigureerd om nmbd en smbd vanuit inetd te starten. Vanaf " -"versie 2.999+3.0.alpha20-4 kan nmbd niet langer door inetd gestart worden. " -"Indien u uw /etc/init.d/samba startup-script aangepast had, dient u dit " -"mogelijks aan te passen opdat nmbd zou starten." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hoe wilt u Samba draaien?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"De Samba daemon smbd kan als een normale daemon of via inetd draaien. Als " -"een daemon is de aangeraden aanpak." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd verplaatsen naar /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 introduceert een nieuwe, meer complete SAM databaseinterface die " -"het /etc/samba/smbpasswd bestand overstijgt. \"Wilt u dat ik uw bestaand " -"smbpasswd bestand voor u naar /var/lib/samba/passdb.tdb migreer? Indien u " -"van plan bent om, in plaats hiervan, een ander pdb-backend (e.g. LDAP) te " -"gebruiken dient u hier 'nee' te antwoorden." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Uw smb.conf wordt herschreven!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT zal uw smb.conf bestand herschrijven. Het zal de ingangen anders " -"schikken en alle comments, include= en copy= opties verwijderen. Als u een, " -"met veel zorg, handmatig opgebouwd smb.conf bestand heeft, maak dan een " -"reservekopie of zie van het gebruik van SWAT af! " diff --git a/packaging/Debian/debian-unstable/po/pt.po b/packaging/Debian/debian-unstable/po/pt.po deleted file mode 100644 index 7c77427b39..0000000000 --- a/packaging/Debian/debian-unstable/po/pt.po +++ /dev/null @@ -1,324 +0,0 @@ -# translation of pt.po to Portuguese -# translation of samba Debian debconf template to Portuguese -# Miguel Figueiredo <elmig@debianpt.org>, 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: samba 3.0.9-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2005-01-05 19:25+0000\n" -"Last-Translator: Miguel Figueiredo <elmig@debianpt.org>\n" -"Language-Team: Portuguese <traduz@debianpt.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Conjunto de caracteres para sistema de ficheiros UNIX" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Actualmente tem um \"character set\" configurado no seu smb.conf. No Samba " -"3.0, esta opção é substituÃda por uma nova opção, \"unix charset\". Por " -"favor especifique o conjunto de caracteres para utilizar com esta nova " -"opção, que controla como o Samba interpreta os nomes dos ficheiros no " -"sistema de ficheiros." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Se deixar esta opção vazia, o seu smb.conf não será alterado." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Conjunto de caracteres para clientes DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Actualmente tem um \"client code page\" definido no seu smb.conf. No Samba " -"3.0, esta opção é substituÃda pela opção \"dos charset\". Por favor " -"especifique o conjunto de caracteres que quer utilizar para esta nova opção. " -"Na maioria dos casos, o valor por omissão escolhido para si será suficiente. " -"Note que esta opção não é necessária para suportar clientes em Windows, é " -"apenas para clientes em DOS. Se deixar esta opção vazia, o seu smb.conf não " -"será alterado." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"Modificar o smb.conf para utilizar definições de WINS a partir de DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Se o seu computador obtém a informação do endereço IP a partir de um " -"servidor de DHCP na rede, o servidor de DHCP pode também fornecer informação " -"acerca de servidores de WINS (\"servidor de nomes NetBIOS\") presentes na " -"rede. Isto requer uma alteração no seu ficheiro smb.conf de modo que as " -"definições de WINS fornecidas por DHCP sejam automaticamente lidas a partir " -"de /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Tem de ter o pacote dhcp3-client instalado para tirar vantagem desta " -"caracterÃstica." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurar o smb.conf através de debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"O resto da configuração de Samba trata de questões que afectam parâmetros " -"em /etc/samba/smb.conf, que é o ficheiro utilizado para configurar os " -"programas de Samba (nmbd e smbd). O seu smb.conf actual contém uma linha " -"'include' ou uma opção que se espalha em multiplas linhas, a qual pode " -"confundir o debconf e necessitar que você edite à mão o smb.conf par o ter " -"novamente operacional." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Se não utilizar o debconf para configurar o smb.conf, terá de lidar você " -"mesmo com quaisquer alterações da configuração, e não poderá tirar partido " -"de melhorias de configuração periódicas. Assim sendo, a utilização do " -"debconf é remomendada se possÃvel." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome do Grupo de trabalho/DomÃnio ?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Isto controla qual o grupo de trabalho em que o seu servidor vai aparecer " -"quando questionado pelos clientes. Note que este parâmetro também controla o " -"nome de DomÃnio quando utilizado com a definição security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Utilizar encriptação de passwords?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Os clientes de Windows recentes comunicam com servidores de SMB utilizando " -"passwords encriptadas. Se deseja utilizar passwords de texto puro você vai " -"necessitar alterar um parâmetro no seu registo do Windows. É recomendado que " -"utilize passwords encriptadas. Se o fizer, assegure-se que tem um ficheiro /" -"etc/samba/smbpasswd válido e que defina lá passwords para cada um dos " -"utilizadores utilizando o comando smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Criar base de dados de passwords samba, /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para ser compatÃvel com valores por omissão na maioria das versões do " -"Windows, o Samba tem de ser configurado para utilizar passwords encriptadas. " -"Isto requer que as passwords de utilizador sejam guardadas num ficheiro " -"separado de /etc/passwd. Este ficheiro pode ser criado automaticamente, mas " -"as passwords têm de ser adicionadas manualmente (por si ou pelo utilizador) " -"executando o comando smbpasswd, e você tem de mantê-las actualizadas no " -"futuro. Se não o criar, você terá de reconfigurar o samba (e provavelmente " -"as máquinas clientes) para utilizar passwords de texto puro. Veja /usr/share/" -"doc/samba-doc/htmldocs/ENCRIPTION.html do pacote samba-doc para mais " -"detalhes." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Os ficheiros de log de Samba foram movidos." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Desde os primeiros pacotes para Debian de Samba 2.2 que os ficheiros de log " -"para ambos os daemons de Samba (nmbd e smbd) são agora guardados em /var/log/" -"samba/. Os nomes dos ficheiros são respectivamente log.nmbd e log.smbd, para " -"o nmbd e smbd." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Os ficheiros de log antigos que estavam em /var/log/ vão ser movidos, para " -"si, para a nova localização." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Executar o nmbd a partir de inetd já não é suportado" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"O seu sistema foi previamente configurado para iniciar o nmbd e smbd a " -"partir de inetd. A partir da versão 2.999+3.0.alpha20-4, o nmbd já não " -"inicia a partir do inetd. Se você modificou o seu script de inicialização /" -"etc/init.d/samba, pode ter de o ajustar agora à mão de modo a que o nmbd " -"inicie." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Como deseja correr o Samba?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"O daemon de Samba smbd pode correr como um daemon normal ou a partir de " -"inetd. Executá-lo como um daemon é a aproximação recomendada." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"O Samba 3.0 introduz um novo e mais completo interface com a base de dados " -"SAM, que suplanta o ficheiro /etc/samba/smbpasswd. Deseja que o seu ficheiro " -"existente smbpasswd seja migrado para /var/lib/samba/passdb.tdb para si? Se " -"planeia utilizar em vez disso outro backend pdb (e.g., LDAP), deve responder " -"aqui 'no'." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "A sua configuração smb.conf será re-escrita!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"O SWAT irá reescrever o seu ficheiro smb.conf. Irá reordenar as entradas e " -"apagar todos os comentários, e opções include= e copy=. Se tem um smb.conf " -"cuidadosamente trabalhado faça uma cópia de segurança dele ou não utilize o " -"SWAT!" diff --git a/packaging/Debian/debian-unstable/po/pt_BR.po b/packaging/Debian/debian-unstable/po/pt_BR.po deleted file mode 100644 index 33e136e8b3..0000000000 --- a/packaging/Debian/debian-unstable/po/pt_BR.po +++ /dev/null @@ -1,338 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2005-05-10 14:07-0300\n" -"Last-Translator: André Luís Lopes <andrelop@debian.org>\n" -"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Conjunto de caracteres para sistema de arquivos Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Atualmente existe um \"conjunto de caracteres\" (\"character set\") " -"configurado em seu arquivo smb.conf. No Samba 3.0, esta opção foi " -"substituída por uma nova opção, a opção \"unix charset\". Por favor, " -"especifique o conjunto de caracteres a ser usado para essa nova opção, a " -"qual controla como o Samba interpreta nomes de arquivos no sistema de " -"arquivos." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Caso você deixe esta opção em branco, seu arquivo smb.conf não será " -"modificado." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Conjunto de caracteres para clientes DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Atualmente existe um \"código de página do cliente\" (\"client code page\") " -"definido em seu arquivo smb.conf. No Samba 3.0, essa opção foi substituída " -"pela opção \"dos charset\". Por favor, especifique o conjunto de caracteres " -"que você deseja usar para essa nova opção. Note que essa opção não é " -"necessária para suportar clientes Windows, mas sim válida somente para " -"clientes DOS. Caso você deixe essa opção em branco, seu arquivo smb.conf não " -"será modificado." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modificar smb.conf para usar configurações WINS fornecidas via DHCP ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Caso seu computador obtenha as informações de endereçamento IP de um " -"servidor DHCP na rede, o servidor DHCP poderá também fornecer informações " -"sobre servidor WINS (\"Servidor de Nomes NetBIOS\") presentes na rede. Para " -"que o Samba leia as configurações WINS fornecidas pelo servidor DHCP " -"automaticamente do arquivo /etc/samba/dhcp.conf, é preciso modificar seu " -"arquivo smb.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Você deve possuir o pacote dhcp3-client instalado para poder usar esse " -"recurso." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurar o arquivo smb.conf através do debconf ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"O restante da configuração do Samba lida com questões que afetam parâmetros " -"no arquivo /etc/samba/smb.conf, que é o arquivo usado para configurar os " -"programas Samba (nmbd e smbd). Seu arquivo smb.conf atual contém uma linha " -"'include' ou uma opção que ocupa diversas linhas, o que pode confundir o " -"debconf e requerer que você edite seu arquivo smb.conf manualmente para " -"torná-lo funcional novamente." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Caso você opte por não usar o debconf para configurar o arquivo smb.conf, " -"será necessário que você lide com quaisquer mudanças de configurações " -"manualmente e você não poderá aproveitar os melhoramentos periódicos de " -"configuração. Por esse motivo, é recomendado usar o debconf, caso seja " -"possível." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome de Domínio/Grupo de Trabalho ?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Este parâmetro controla em qual grupo de trabalho (workgroup) seu servidor " -"parecerá estar quando uma pesquisa pelo mesmo for feita por clientes. Note " -"que este parâmetro também controla o nome de Domínio usado com a " -"configuração security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Usar senhas criptografadas ?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Clientes Windows atuais comunicam-se com servidores SMB usando senhas " -"criptografadas. Caso você queira usar senhas em texto puro você precisará " -"modificar um parâmetro no registro de seu Windows. É recomendado que você " -"use senhas criptografadas. Caso as utilize, certifique-se de possuir um " -"arquivo /etc/samba/smbpasswd válido e que você tenha definido senhas no " -"mesmo para cada usuário, utilizando o comando smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Gerar a base de dados para senhas /var/lib/samba/passdb.tdb ?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para compatibilidade com os padrões adotados em todas as versões atuais do " -"Windows, o Samba deve ser configurado para usar senhas criptografadas. Isso " -"requer que as senhas dos usuários sejam armazenadas em um arquivo diferente " -"do arquivo /etc/passwd. Esse arquivo pode ser criado automaticamente, mas as " -"senhas devem ser definidas manualmente (por você ou pelo usuário) executando " -"o utilitário smbpasswd. Você deve certificar-se de manter esse arquivo " -"atualizado futuramente. Caso você não crie esse arquivo, você terá que " -"reconfigurar o Samba (e provavelmente suas máquinas clientes) para " -"utilização de senhas em texto puro. Consulte a documentação do pacote samba-" -"doc em /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html para maiores " -"detalhes." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Arquivos de log do Samba foram movidos." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Desde os primeiros pacotes Debian do Samba 2.2, os arquivos de log para " -"ambos os daemons Samba (nmbd e smbd) são armazenados no diretório /var/log/" -"samba/. Os nomes desses arquivos são log.nmbd e log.smbd, para o nmbd e para " -"o smbd, respectivamente." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Os antigos arquivos de log que estavam no diretório /var/log/ serão movidos " -"para o novo local para você." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "A execução do nmbd a partir do inetd não é mais suportada" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Seu sistema foi previamente configurado para iniciar os daemons nmbd e smbd " -"a partir do inetd. Desde a versão 2.999+3.0.alpha20-4, o nmbd não mais será " -"iniciado a partir do inetd. Caso você tenha modificado seu script de " -"inicialização /etc/init.d/samba, você precisará ajustá-lo manualmente agora " -"para que o nmbd seja iniciado." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Como você deseja que o Samba seja executado ?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"O serviço Samba smbd pode ser executado como daemon normal ou a partir do " -"inetd. Executá-lo como daemon é o método recomendado." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb ?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"O Samba 3.0 introduziu uma nova e mais completa interface de base de dados " -"SAM que substituiu o arquivo /etc/samba/smbpasswd. Você gostaria que o " -"arquivo smbpasswd existente fosse migrado para /var/lib/samba/passdb.tdb " -"para você ? Caso você planeje usar um outro backend (como LDAP, por " -"exemplo), não aceite mover o arquivo smbpasswd." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Seu arquivo smb.conf será reescrito !" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"O SWAT irá reescrever seu arquivo smb.conf. Ele irá rearrumar as entradas e " -"apagar todos os comentários, opções include= e copy=. Caso você possua um " -"arquivo smb.conf cuidadosamente criado e comentado, faça uma cópia de " -"segurança (backup) do mesmo ou não use o SWAT !" diff --git a/packaging/Debian/debian-unstable/po/ru.po b/packaging/Debian/debian-unstable/po/ru.po deleted file mode 100644 index a09e4edcbd..0000000000 --- a/packaging/Debian/debian-unstable/po/ru.po +++ /dev/null @@ -1,315 +0,0 @@ -# translation of samba_3.0.14a-2_ru.po to Russian
-# Yuriy Talakan' <yt@amur.elektra.ru>, 2005.
-msgid "" -msgstr "" -"Project-Id-Version: samba_3.0.14a-2_ru\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2005-05-21 21:43+1000\n" -"Last-Translator: Yuriy Talakan' <yt@amur.elektra.ru>\n" -"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.9.1\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Кодировка Ð´Ð»Ñ Ñ„Ð°Ð¹Ð»Ð¾Ð²Ð¾Ð¹ ÑиÑтемы Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"character set\" в smb.conf. Ð’ Samba 3.0, Ñта Ð¾Ð¿Ñ†Ð¸Ñ " -"заменена на \"unix charset\". Укажите кодировку, которую вы желаете " -"иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Она отвечает за то, как Samba " -"интерпретирует имена файлов в файловой ÑиÑтеме." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "ЕÑли вы оÑтавите опцию пуÑтой, ваш smb.conf не будет изменен." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Кодировка Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"client code page\" в smb.conf. Ð’ Samba 3.0, Ñта " -"Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð°Ð¼ÐµÐ½ÐµÐ½Ð° на \"dos charset\". Укажите кодировку, которую вы желаете " -"иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Ð’ большинÑтве Ñлучаев Ð·Ð½Ð°Ñ‡ÐµÐ½Ð¸Ñ Ð¿Ð¾ " -"умолчанию будет доÑтаточно. Запомните, что Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð½Ðµ нужна Ð´Ð»Ñ Ð¿Ð¾Ð´Ð´ÐµÑ€Ð¶ÐºÐ¸ " -"клиентов Windows, она только Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS. ЕÑли вы оÑтавите опцию " -"пуÑтой, ваш smb.conf не будет изменен." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Изменить smb.conf Ð´Ð»Ñ Ð¸ÑÐ¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ð½Ð¸Ñ Ð½Ð°Ñтроек WINS из DHCP?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"ЕÑли ваш компьютер получает информацию о Ñвоем IP-адреÑе от Ñервера DHCP " -"через Ñеть, то DHCP-Ñервер также может предоÑтавлÑÑ‚ÑŒ информацию о Ñерверах " -"WINS(\"Ñерверы имен NetBIOS\"), приÑутÑтвующих в Ñети. Ðто требует внеÑÐµÐ½Ð¸Ñ " -"изменений в ваш файл smb.conf, чтобы предоÑтавленные через DHCP наÑтройки " -"WINS автоматичеÑки читалиÑÑŒ из /etc/samba/dhcp.conf." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Чтобы воÑпользоватьÑÑ Ñтой возможноÑтью, вы должны уÑтановить пакет dhcp3-" -"client." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "ÐаÑтроить smb.conf через debconf?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"ОÑтавшаÑÑÑ Ñ‡Ð°ÑÑ‚ÑŒ наÑтройки Samba ÑоÑтоит из вопроÑов, которые затрагивают " -"параметры в /etc/samba/smb.conf. Ðтот файл иÑпользуетÑÑ Ð´Ð»Ñ Ð½Ð°Ñтройки " -"программ Samba (nmbd и smbd.) Ваш текущий smb.conf Ñодержит Ñтроку 'include' " -"или опцию, ÐºÐ¾Ñ‚Ð¾Ñ€Ð°Ñ ÑоÑтоит из неÑкольких Ñтрок. Ðто может Ñмутить debconf и " -"потребовать от Ð²Ð°Ñ Ñ€ÑƒÑ‡Ð½Ð¾Ð³Ð¾ Ñ€ÐµÐ´Ð°ÐºÑ‚Ð¸Ñ€Ð¾Ð²Ð°Ð½Ð¸Ñ Ð²Ð°ÑˆÐµÐ³Ð¾ smb.conf Ð´Ð»Ñ Ð²Ð¾ÑÑÑ‚Ð°Ð½Ð¾Ð²Ð»ÐµÐ½Ð¸Ñ " -"работоÑпоÑобноÑти." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"ЕÑли вы не иÑпользуете debconf Ð´Ð»Ñ Ð½Ð°Ñтройки smb.conf, то должны " -"ÑамоÑтоÑтельно позаботитьÑÑ Ð¾Ð±Ð¾ вÑех изменениÑÑ… наÑтроек и не Ñможете " -"воÑпользоватьÑÑ Ð¿Ñ€ÐµÐ¸Ð¼ÑƒÑ‰ÐµÑтвами периодичеÑкого ÑƒÐ»ÑƒÑ‡ÑˆÐµÐ½Ð¸Ñ Ð½Ð°Ñтроек. Таким " -"образом, рекомендуетÑÑ Ð¿Ð¾ возможноÑти иÑпользовать debconf." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Ð˜Ð¼Ñ Ñ€Ð°Ð±Ð¾Ñ‡ÐµÐ¹ группы/домена?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Задает рабочую группу, в которой поÑвитÑÑ Ð²Ð°Ñˆ Ñервер, когда его увидÑÑ‚ " -"клиенты. Обратите внимение, что Ñтот параметр также задает Ð¸Ð¼Ñ Ð´Ð¾Ð¼ÐµÐ½Ð°, " -"которое иÑпользуетÑÑ Ð¿Ñ€Ð¸ security=domain." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "ИÑпользовать шифрацию паролей?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Современные клиенты Windows общаютÑÑ Ñ Ñерверами SMB иÑÐ¿Ð¾Ð»ÑŒÐ·ÑƒÑ ÑˆÐ¸Ñ„Ñ€Ð¾Ð²Ð°Ð½Ð½Ñ‹Ðµ " -"пароли. ЕÑли вы пожелаете иÑпользовать открытые пароли, вам придетÑÑ " -"изменить параметр в рееÑтре Windows. РекомендуетÑÑ Ð¸Ñпользовать шифрованные " -"пароли. Ð’ Ñтом Ñлучае убедитеÑÑŒ, что у Ð²Ð°Ñ Ð¿Ñ€Ð°Ð²Ð¸Ð»ÑŒÐ½Ñ‹Ð¹ файл /etc/samba/" -"smbpasswd и что вы уÑтановили там пароли Ð´Ð»Ñ ÐºÐ°Ð¶Ð´Ð¾Ð³Ð¾ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»Ñ ÐºÐ¾Ð¼Ð°Ð½Ð´Ð¾Ð¹ " -"smbpasswd." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Создать базу данных паролей samba, /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Ð”Ð»Ñ ÑовмеÑтимоÑти Ñо значением по умолчанию в большинÑтве верÑий Windows, " -"Samba должна быть наÑтроена на иÑпользование шифрованных паролей. Ðто " -"требует Ñ…Ñ€Ð°Ð½ÐµÐ½Ð¸Ñ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»ÑŒÑких паролей в файле, отдельном от /etc/passwd. " -"Ðтот файл может быть Ñоздан автоматичеÑки, но пароли должны быть добавлены " -"вручную (вами или пользователем) поÑредÑтвом запуÑка smbpasswd, и вы должны " -"заботитьÑÑ Ð¾ поддержании его в актуальном ÑоÑтоÑнии в будущем. ЕÑли вы не " -"Ñоздадите его, то должны перенаÑтроить samba (и вероÑтно ваши клиентÑкие " -"машины) на иÑпользование открытых паролей. Более подробно Ñмотрите в /usr/" -"share/doc/samba-doc/htmldocs/ENCRYPTION.html из пакета samba-doc." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "log-файлы Samba перемеÑтилиÑÑŒ." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"ÐÐ°Ñ‡Ð¸Ð½Ð°Ñ Ñ Ð¿ÐµÑ€Ð²Ñ‹Ñ… пакетов Samba 2.2 Ð´Ð»Ñ Debian, log-файлы Ð´Ð»Ñ Ð´ÐµÐ¼Ð¾Ð½Ð¾Ð² Samba " -"(nmbd и smbd) хранÑÑ‚ÑÑ Ñ‚ÐµÐ¿ÐµÑ€ÑŒ в /var/log/samba/. Файлы называютÑÑ log.nmbd и " -"log.smbd Ð´Ð»Ñ nmbd и smbd ÑоответÑтвенно." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Старые log-файлы, которые были в /var/log/, будут перемещены в новое Ð´Ð»Ñ Ð²Ð°Ñ " -"меÑто." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "ЗапуÑк nmbd из inetd больше не поддерживаетÑÑ" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Ваша ÑиÑтема была ранее наÑтроена на запуÑк nmbd и smbd из inetd. nmbd Ñ " -"верÑии 2.999+3.0.alpha20-4 больше не запуÑкаетÑÑ Ð¸Ð· inetd. ЕÑли вы изменили " -"ваш Ñтартовый Ñкрипт /etc/init.d/samba, вам необходимо откорректировать его " -"вручную, чтобы nmbd запуÑкалÑÑ." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Как вы желаете запуÑкать Samba?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba-демон smbd может запуÑкатьÑÑ ÐºÐ°Ðº обычный демон или из inetd. " -"Рекомендуем выбрать запуÑк в качеÑтве демона." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "ПеремеÑтить /etc/samba/smbpasswd в /var/lib/samba/passdb.tdb?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 приноÑит новый, более полный Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ Ð±Ð°Ð·Ñ‹ данных SAM, который " -"заменÑет Ñобой файл /etc/samba/smbpasswd. Желаете, чтобы ваш ÑущеÑтвующий " -"файл smbpasswd мигрировал в /var/lib/samba/passdb.tdb? ЕÑли вы планируете " -"вмеÑто него иÑпользовать другой Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ pdb (например, LDAP), вы должны " -"ответить здеÑÑŒ 'нет'." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Ваш smb.conf будет перезапиÑан!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT перепишет ваш файл smb.conf. Он перегруппирует вÑе запиÑи и удалит вÑе " -"комментарии, опции include= и copy=. ЕÑли у Ð²Ð°Ñ Ñ‚Ñ‰Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð¾ Ñозданный smb." -"conf, то Ñохраните его в безопаÑном меÑте или не иÑпользуйте SWAT!" diff --git a/packaging/Debian/debian-unstable/po/sv.po b/packaging/Debian/debian-unstable/po/sv.po deleted file mode 100644 index 452e545776..0000000000 --- a/packaging/Debian/debian-unstable/po/sv.po +++ /dev/null @@ -1,281 +0,0 @@ -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# Developers do not need to manually edit POT or PO files. -# , fuzzy -# -# -msgid "" -msgstr "" -"Project-Id-Version: samba 3.0.14a-6\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2005-10-04 15:48+0200\n" -"Last-Translator: Daniel Nylander <po@danielnylander.se>\n" -"Language-Team: Swedish <sv@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-1\n" -"Content-Transfer-Encoding: 8bit" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Teckenuppsättning för UNIX-filsystem" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Du har för närvarande en teckenuppsättning konfigurerad i din smb.conf " -"I Samba 3.0 är denna funktion utbytt mot en ny funktion \"unix charset\". " -"Specificera den teckenuppsättning du önskar att använda för denna inställning " -"som kontrollerar hur Samba läser av filnamn på filsystemet." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Om du lämnar denna blank kommer din smb.conf inte att ändras." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Teckenuppsättning för DOS-klienter" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Du har för närvarande en \"client code page\" satt i din smb.conf. " -"I Samba 3.0 är denna inställning utbytt mot \"dos charset\". Specificera " -"den teckenuppsättning du önskar använda för denna inställning. " -"I de flesta fall är standard inställningen tillräcklig. Notera att denna inställning " -"inte är för att stödja Windows-klienter utan bara för DOS-klienter. Om du lämnar " -"denna inställning blank kommer din smb.conf inte att ändras." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modifiera smb.conf att använda WINS-inställningar från DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Om din dator får en IP-address och information från en DHCP-server på nätverket " -"kan även DHCP-server också skicka information om WINS-servrar (\"NetBIOS namnservrar\") i ditt nätverk. Detta kräver en ändring i din fil smb.conf så att WINS-inställningar från DHCP-servern automatiskt kan läsas från /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Du måste ha paketet dhcp3-client installerat för att använda denna funktion." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Konfigurera smb.conf genom Debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Resten av konfigurationen av Samba gäller frågor som påverkar parametrar i " -"/etc/samba/smb.conf vilken är filen som används för att konfigurera Samba-programmen (nmbd och smbd). Din nuvarande smb.conf innehåller en 'include'-rad eller en " -"inställning som spänner över flera rader som kan förvirra Debconf och kan innebära " -"att du måste ändra i din smb.conf på egen hand för att få det att fungera igen." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Om du inte använder Debconf för att konfigurera smb.conf måste du hantera " -"alla konfigurationsändringar på egen hand och kan därför inte utnyttja alla " -"förbättringar i de periodiska konfigurationsändringarna. Därför är det rekommenderat " -"att använda Debconf." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Arbetsgrupp/Domännamn?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Denna kontrollerar vilken arbetsgrupp din server ska synas i när klienterna frågar. " -"Notera att denna parameter också kontrollerar domännamnet som används med " -"parametern 'security=domain'." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Använda lösenordskryptering?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Tidigare Windows-klienter kommunicerar med SMB-servrar med krypterade lösenord. " -"Om du vill använda lösenord i klartext behöver du ändra en parameter i Windows registry. Det rekommenderas att du använder krypterade lösenord. Om du gör det, " -"kontrollera att du har en giltig fil /etc/samba/smbpasswd och att du har satt lösenorden " -"där för varje användare med kommandot smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Skapa Samba's lösenordsdatabas, /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"För att vara kompatibel med de standarder i de flesta versioner av Windows måste " -"Samba konfigureras för att använda krypterade lösenord. Detta kräver att " -"användarnas lösenord lagras i en fil som är separerad från /etc/passwd. Denna fil " -"kan skapas automatiskt men lösenorden måste läggas till manuellt (av dig eller användaren) genom att köra kommandot smbpasswd och du måste se till att den blir " -"uppdaterad i framtiden. Om du inte skapar den måste du konfigurera om samba " -"(och antagligen även dina klientmaskiner) för att använda lösenord i klartext. Se " -"/usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html från paketet samba-doc för " -"mer information." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba's loggfiler har flyttats." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"" - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De gamla loggfilerna som fanns i /var/log har flyttats till den nya mappen åt dig." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Köra nmbd från inetd är inte längre supporterad" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Ditt system var tidigare konfigurerat att starta nmbd från inetd. " -"Från och med version 2.999+3.0.alpha20-4 kommer inte nmbd att startas via inetd. " -"Om du har modifierat ditt startskript /etc/init.d/samba måste du kanske justera den " -"för hand nu så att nmbd kan starta." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hur vill du köra Samba?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba-daemonen smbd kan köras som en normal daemon eller från inetd. " -"Köra som en daemon är den rekommenderade metoden." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Flytta /etc/samba/smbpasswd till /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 introducerar en ny, mer komplett SAM-databasinterface som ersätter " -"filen /etc/samba/smbpasswd. Vill du migrera din existerande smbpasswd till /var/lib/samba/passdb.tdb? Om du planerar att använda ett annat pdb-baksystem (till exempel LDAP) instället för detta bör du svara 'nej' här." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Din smb.conf kommer att skrivas om!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SAWT kommer att skriva om din fil smb.conf. Den kommer att arrangera om raderna " -"och radera alla kommentarer, include= och copy= inställningarna. Om du har en " -"känslig och välstrukturerad smb.conf så ta en backup först eller använd inte SWAT!" - diff --git a/packaging/Debian/debian-unstable/po/templates.pot b/packaging/Debian/debian-unstable/po/templates.pot deleted file mode 100644 index 2eeea8efab..0000000000 --- a/packaging/Debian/debian-unstable/po/templates.pot +++ /dev/null @@ -1,262 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" -"Language-Team: LANGUAGE <LL@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=CHARSET\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-unstable/po/tr.po b/packaging/Debian/debian-unstable/po/tr.po deleted file mode 100644 index 180efad3f0..0000000000 --- a/packaging/Debian/debian-unstable/po/tr.po +++ /dev/null @@ -1,322 +0,0 @@ -# Turkish translation of samba. -# This file is distributed under the same license as the samba package. -# Mehmet Türker <mturker@innova.com.tr>, 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2004-06-01 09:42+0300\n" -"Last-Translator: Mehmet Türker <mturker@innova.com.tr>\n" -"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Unix dosya sistemi için karakter seti" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Halihazırda smb.conf yapılandırma dosyanızda \"character set\" ayarı mevcut. " -"Samba 3.0'da bu seçenek yenisiyle: \"unix charset\" ile deÄŸiÅŸtirildi. Lütfen " -"Samba'nın sistemdeki dosya isimlerini çevirirken dikkate aldığı bu yeni " -"seçenekle kullanılmasını istediÄŸiniz karakter setini girin." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Bu seçeneÄŸi boÅŸ bırakırsanız, smb.conf dosyanız deÄŸiÅŸtirilmeyecektir." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "DOS istemcileri için karakter seti" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Halihazırda smb.conf yapılandırma dosyanızda \"client code page\" ayarı " -"mevcut. Samba 3.0'da bu seçenek \"dos charset\" seçeneÄŸiyle deÄŸiÅŸtirildi. " -"Lütfen bu yeni seçenekle beraber kullanmak için bir karakter seti seçin. " -"ÇoÄŸu durumda öntanımlı olarak seçilmiÅŸ bulunan seçenek uygundur. Aklınızda " -"bulunsun bu seçenek Windows istemcilerini desteklemek için gerekli deÄŸildir, " -"sadece DOS istemcileri içindir. EÄŸer bu seçeneÄŸi boÅŸ bırakırsanız smb.conf " -"dosyanız deÄŸiÅŸtirilmeyecektir." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"WINS ayarlarını DHCP'den kullanmak için smb.conf dosyasında deÄŸiÅŸiklik " -"yapılsın mı?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"EÄŸer bilgisayarınız IP adresini ağınızdaki bir DHCP sunucusundan alıyorsa, " -"DHCP sunucusu ayrıca ağınızda bulunan WINS sunucuları (\"NetBIOS alanadı " -"sunucuları\") hakkında da bilgi verebilir. Bu, smb.conf dosyanızda DHCP " -"tarafından sunulan WINS ayarlarının otomatik olarak /etc/samba/dhcp.conf " -"dosyasından okunmasını saÄŸlayan bir deÄŸiÅŸikliÄŸi gerektirir." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Bu özellikten yararlanabilmek için dhcp3-client paketinin kurulmuÅŸ olması " -"gerekir." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "\"smb.conf\" dosyası debconf ile yapılandırılsın mı?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Geri kalan Samba yapılandırması Samba uygulamalarını (nmbd ve smbd) " -"yapılandırmak için kullanılan /etc/samba/smb.conf dosyasındaki parametreleri " -"etkileyen sorularla devam edecektir. Mevcut smb.conf dosyası, debconf'u " -"ÅŸaşırtabilecek ve smb.conf dosyanızı elle deÄŸiÅŸtirilmesi zorunda kılacak bir " -"'include' satırı veya birden fazla satır boyunca devam eden bir seçenek " -"içeriyor." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"EÄŸer smb.conf'u yapılandırmak için debconf'u kullanmıyorsanız bütün " -"yapılandırma deÄŸiÅŸikliklerini kendiniz elle yapmanız gerekir. Bu durumda " -"periyodik olarak sunulan yapılandırma iyileÅŸtirmelerinden de " -"yararlanamayacaksınız. Bu nedenlerle eÄŸer mümkünse debconf kullanımı " -"tavsiye edilir." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Çalışma Grubu/Etki Alanı Ä°smi?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Bu ayar, sunucunuzun istemciler tarafından sorgulandığında hangi Çalışma " -"Grubu içerisinde gözükeceÄŸini kontrol eder. Aklınızda bulunsun, bu parametre " -"ayrıca security=domain ayarı ile beraber kullanılacak Etki Alanını da " -"kontrol eder." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Parola ÅŸifrelenmesi kullanılsın mı?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Yeni Windows istemcileri SBM sunucularıyla ÅŸifrelenmiÅŸ parolalar kullanarak " -"iletiÅŸim kurarlar. EÄŸer düz metin parolaları kullanmak istiyorsanız Windows " -"registry içinde bir parametreyi deÄŸiÅŸtirmelisiniz. EÄŸer bu iÅŸlemi " -"yapmışsanız, geçerli bir /etc/samba/smbpasswd dosyanız olduÄŸundan ve buraya " -"smbpasswd komutu kullanarak bütün kullanıcılar için parola kaydı " -"eklendiÄŸinden emin olun." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba parola veritabanı /var/lib/samba/passwd.tdb yaratılsın mı?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Windows'un çoÄŸu sürümüyle uyumlu olması için, Samba'nın ÅŸifreli parolaları " -"kullanmak üzere yapılandırılması gerekir. Bu iÅŸlem kullanıcı parolalarının /" -"etc/passwd dosyasından farklı bir yerde saklanmasını gerektirir. Bu dosya " -"otomatik olarak yaratılabilir, fakat parolaların (siz veya kullanıcı " -"tarafından) smbpasswd çalıştırılarak elle girilmesi ve gelecekte de güncel " -"tutulması gerekir. EÄŸer bunu yaratmazsanız, düz metin parolalar " -"kullanabilmek için samba'yı (ve muhtemelen istemci makineleri) yeniden " -"yapılandırmanız gerekir. Daha ayrıntılı bilgi için samba-doc paketinden " -"çıkan /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html'ye baÅŸvurun." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba'nın günce dosyaları taşındı." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Samba 2.2'nin ilk paketlerinden itibaren, Samba artalan süreçlerine (nmbd ve " -"smbd) ait Debian günce dosyaları artık /var/log/samba altında saklanıyor. Bu " -"dosyaların isimleri nmbd ve smbd için sırasıyla log.nmbd ve log.smbd'dir." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"/var/log/ içinde bulunan eski günce dosyaları yeni bir konuma taşınacak." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Nmbd'nin inetd'den çalıştırılması artık desteklenmiyor" - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Sisteminiz, nmbd ve smbd'yi inetd üzerinden çalıştıracak ÅŸekilde " -"ayarlanmış. Sürüm 2.999+3.0.alpha20-4'ten sonra artık nmbd inetd'den " -"çalıştırılmıyor. EÄŸer /etc/init.d/samba baÅŸlangıç betiÄŸini kendiniz " -"düzenlediyseniz, nmbd'nin çalışabilmesi için bu dosyayı elle ayarlamak " -"zorunda kalabilirsiniz." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "artalan süreçleri, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Samba'nın nasıl çalışmasını istersiniz?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Samba artalan süreci smbd, normal bir artalan süreci olarak veya inetd'den " -"çalışabilir. Tavsiye edilen yaklaşım artalan süreci olarak çalıştırmaktır." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd /var/lib/samba/passwd.tdb'ye taşınsın mı?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0, /etc/samba/smbpasswd'nin yerini alan yeni ve daha eksiksiz bir " -"SAM veritabanı arayüzü ile birlikte geliyor. Mevcut smbpasswd dosyasının /" -"var/lib/samba/passdb.tbd dosyasına dönüştürülmesini ister misiniz? EÄŸer " -"baÅŸka bir pdb arkayüzü (ör. LDAP) kullanmayı planlıyorsanız, burada 'hayır' " -"cevabını vermelisiniz." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Smb.conf dosyanız tekrar yazılacak!" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT smb.conf dosyanızın üzerine yazacak. Bu iÅŸlem kayıtları tekrar " -"düzenleyecek, bütün yorumları, include= ve copy= seçeneklerini silecek. EÄŸer " -"özel olarak tasarladığınız bir smb.conf dosyanız varsa, bunu yedekleyin veya " -"SWAT kullanmayın!" diff --git a/packaging/Debian/debian-unstable/po/vi.po b/packaging/Debian/debian-unstable/po/vi.po deleted file mode 100644 index bae046c1ee..0000000000 --- a/packaging/Debian/debian-unstable/po/vi.po +++ /dev/null @@ -1,322 +0,0 @@ -# Vietnamese translation for samba. -# Copyright © 2005 Free Software Foundation, Inc. -# Clytie Siddall <clytie@riverland.net.au>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: samba 3.0.14a-6\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-08-13 17:05-0700\n" -"PO-Revision-Date: 2005-07-12 16:17+0930\n" -"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n" -"Language-Team: Vietnamese <gnomevi-list@lists.sourceforge.net>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0\n" -"X-Generator: LocFactoryEditor 1.2.2\n" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Bá»™ ký tá»± cho hệ thống táºp tin Unix" - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Hiện thá»i bạn có cấu hình má»™t «character set» (bá»™ ký tá»±) trong táºp tin «smb." -"conf». Trong Samba phiên bản 3.0, tùy chá»n nà y được thay thế bằng má»™t tùy " -"chá»n má»›i, «unix charset» (bá»™ ký tá»± Unix: 'charset' là viết tắt cho " -"'character set'). Bạn hãy ghi rõ bá»™ ký tá»± nà o bạn muốn sá» dụng cho tùy chá»n " -"má»›i nà y, mà điá»u khiển cách Samba giải thÃch tên táºp tin trong hệ thống táºp " -"tin nà y." - -#. Type: string -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Nếu bạn bá» rá»—ng tùy chá»n nà y thì sẽ không sá»a đổi táºp tin «smb.conf» của bạn." - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Bá»™ ký tá»± cho trình khách DOS" - -#. Type: string -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Hiện thá»i bạn có láºp má»™t «client code page» (trang mã khách) trong táºp tin " -"«smb.conf». Trong Samba phiên bản 3.0, tùy chá»n nà y được thay thế bằng tùy " -"chá»n «dos charset» (bá»™ ký tá»± DOS). Bạn hãy ghi rõ bá»™ ký tá»± nà o bạn muốn sá» " -"dụng cho tùy chá»n má»›i nà y. Trong phần lá»›n trÆ°á»ng hợp, giá trị mặc định là " -"đúng. Hãy ghi chú rằng không cần thiết tùy chá»n nà y để há»— trợ trình khách " -"Windows: chỉ trình khách DOS cần thiết nó. Nếu bạn bá» rá»—ng tùy chá»n nà y thì " -"sẽ không sá»a đổi táºp tin «smb.conf» của bạn." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Sá»a đổi «smb.conf» để dùng thiết láºp WINS từ DHCP không?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Nếu máy tÃnh bạn gá»i thông tin địa chỉ IP từ má»™t trình phục vụ DHCP trên " -"mạng, trình phục vụ DHCP có lẽ cÅ©ng có khả năng cung cấp thông tin vá» trình " -"phục vụ WINS («NetBIOS name servers») có trên mạng. Dịch vụ nà y cần thiết " -"bạn thay đổi táºp tin «smb.conf» mình để cho phép thiết láºp WINS do DHCP cung " -"cấp sẽ tá»± Ä‘á»™ng được Ä‘á»c từ táºp tin «/etc/samba/dhcp.conf»." - -#. Type: boolean -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "Äể nhá»› dịp tÃnh năng nà y, bạn cần phải cà i đặt gói tin «dhcp3-client»." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Cấu hình «smb.conf» bằng debconf không?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"Những phần còn lại của cấu hình Samba Ä‘á» cáºp câu há»i vá» tham số trong táºp " -"tin «/etc/samba/smb.conf», táºp tin được dùng để cấu hình chÆ°Æ¡ng trình Samba " -"(nmbd và smbd). Táºp tin «smb.conf» hiện thá»i của bạn chứa má»™t dòng " -"«include» (gồm) hay má»™t tùy chá»n theo nhiá»u dòng, mà có thể gây ra lá»—i trong " -"trình debconf nên bạn sẽ phải tá»± sá»a đổi táºp tin «smb.conf» mình để hoạt hóa " -"lại nó." - -#. Type: boolean -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Nếu bạn không sá» dụng debconf để cấu hình táºp tin «smb.conf», bạn sẽ phải tá»± " -"quản lý sá»± thay đổi cấu hình nà o, và sẽ không thể nhá»› dịp cấu hình tăng " -"cÆ°á»ng định kỳ. Vì váºy, khuyến khÃch bạn sá» dụng debconf nếu có thể." - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Tên nhóm là m việc hay tên miá»n?" - -#. Type: string -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Tùy chá»n nà y Ä‘iá»u khiển nhóm là m việc (workgroup) nà o hình nhÆ° trình phục vụ " -"bạn có trong, khi trình khách yêu cầu. Hãy ghi chú rằng tham số nà y cÅ©ng " -"Ä‘iá»u khiển tên miá»n được dùng vá»›i thiết láºp «security=domain» (bảo máºt = " -"miá»n)." - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Máºt mã hóa máºt khẩu không?" - -#. Type: boolean -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Trình khách Windows má»›i hÆ¡n có liên lạc vá»›i trình phục vụ SMB dùng máºt khẩu " -"máºt mã. Nếu bạn có muốn sá» dụng máºt khẩu «chữ rõ» (chữ thô, không có máºt mã) " -"thì bạn sẽ cần phải thay đổi má»™t tham số trong sổ đăng ký (registry) Windows " -"mình. Khuyến khÃch bạn sá» dụng máºt khẩu máºt mã. Nếu bạn là m nhÆ° thế, hãy " -"kiểm tra xem có má»™t táºp tin «/etc/samba/smbpasswd» hợp lệ, và bạn đã láºp máºt " -"khẩu trong nó cho má»—i ngÆ°á»i dùng có dùng lệnh «smbpasswd»." - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Tạo cÆ¡ sở dữ liệu máºt khẩu samba «/var/lib/samba/passdb.tdb» không?" - -#. Type: boolean -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Äể tÆ°Æ¡ng thÃch vá»›i những giá trị mặc định trong phần lá»›n phiên bản Windows, " -"trình Samba phải có cấu hình dùng máºt khẩu máºt mã. Là m nhÆ° thế cần thiết các " -"máºt khẩu ngÆ°á»i dùng được lÆ°u và o má»™t táºp tin khác vá»›i «/etc/passwd». Có thể " -"tá»± Ä‘á»™ng tạo táºp tin riêng nà y, nhÆ°ng mà phải tá»± thêm máºt khẩu (bạn hay ngÆ°á»i " -"dùng thêm) bằng cách chạy lệnh «smbpasswd», và bạn phải định bảo quản nó cáºp " -"nháºt. Nếu bạn không tạo táºp tin nà y thì bạn sẽ phải cấu hình lại trình samba " -"(rất có thể cùng vá»›i các máy khách) để dùng máºt khẩu chữ thô. Hãy xem táºp " -"tin «/usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html» từ gói tin «samba-" -"doc» để tìm chi tiết." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Táºp tin bản ghi Samba đã di chuyển rồi." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Từ gói tin thứ nhất của Samba phiên bản 2.2 cho Debian, những táºp tin bản " -"ghi cho cả hai trình ná»n Samba (nmbd và smbd) được lÆ°u và o «/var/log/" -"samba/». Tên của táºp tin nà y là «log.nmbd» và «log.smbd» cho trình nmdb và " -"trình smbd riêng từng cái." - -#. Type: note -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Các táºp tin bản ghi cÅ© đã trong «/var/log/» sẽ được di chuyển sang vị trà " -"má»›i cho bạn dùng." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Không còn há»— trợ lại chạy trình nmbd từ inetd." - -#. Type: note -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"TrÆ°á»›c nà y, hệ thống bạn được cấu hình để khởi chạy trình ná»n nmbd và smbd từ " -"inetd. Từ phiên bản 2.999+3.0.alpha20-4, nmbd sẽ không còn được khởi chạy " -"lại từ inetd. Nếu bạn đã sá»a đổi táºp lệnh khởi chạy «/etc/init.d/samba» thì " -"có lẽ bạn muốn tá»± Ä‘iá»u chỉnh nó, để khởi chạy nmbd trong trÆ°á»ng hợp má»›i nà y." - -#. Type: select -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "trình ná»n, inetd" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Bạn có muốn chạy Samba nhÆ° thế nà o?" - -#. Type: select -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Trình ná»n (dæmon) Samba smbd có thể chạy vá»›i tÆ° cách trình ná»n bình thÆ°á»ng, " -"hoặc từ inetd. Khuyên bạn chạy nó là trình ná»n." - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" -"Di chuyển «/etc/samba/smbpasswd» sang «/var/lib/samba/passdb.tdb» không?" - -#. Type: boolean -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba phiên bản 3.0 giá»›i thiệu má»™t giao diện cÆ¡ sở dữ liệu SAM má»›i hÆ¡n, hoà n " -"thà nh hÆ¡n mà thay thế táºp tin «/etc/samba/smbpasswd». Bạn có muốn trình nà y " -"di chuyển táºp tin «smbpasswd» đã có sang «/var/lib/samba/passdb.tdb» không? " -"Nếu bạn định sá» dụng háºu phÆ°Æ¡ng «pdb» khác (v.d. LDAP) thì bạn nên trả lá»i " -"Không (no) tại đây." - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "• Sẽ ghi lại táºp tin «smb.conf» của bạn. •" - -#. Type: note -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT sẽ ghi lại táºp tin «smb.conf» của bạn. Nó sẽ sắp xếp lại các mục nháºp, " -"và xóa bá» má»i chú thÃch và tùy chon «include=» và «copy=». Nếu bạn không " -"muốn mất táºp tin «smb.conf» mình thì hãy lÆ°u trữ nó, hoặc không sá» dụng SWAT." diff --git a/packaging/Debian/debian-unstable/python2.3-samba.files b/packaging/Debian/debian-unstable/python2.3-samba.files deleted file mode 100644 index 82759d81b8..0000000000 --- a/packaging/Debian/debian-unstable/python2.3-samba.files +++ /dev/null @@ -1 +0,0 @@ -usr/lib/python2.3/site-packages/ diff --git a/packaging/Debian/debian-unstable/rules b/packaging/Debian/debian-unstable/rules deleted file mode 100755 index bfc15255f3..0000000000 --- a/packaging/Debian/debian-unstable/rules +++ /dev/null @@ -1,358 +0,0 @@ -#!/usr/bin/make -f -# -# Important modifications (introduction of a saved config.cache to -# solve build problems) introduced in Samba 2.2.1a-5. These -# modification were made by Steve Langasek <vorlon@netexpress.net>. -# -# - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -# This is the debhelper compatability version to use. -export DH_COMPAT=4 - -# This has to be exported to make some magic below work. -export DH_OPTIONS - -# Set the host and build architectures for use with config.cache loading, -# cross-building, etc. -DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -DEB_HOST_ARCH_OS := $(shell dpkg-architecture -qDEB_HOST_ARCH_OS) - -export DEB_HOST_GNU_TYPE -export DEB_BUILD_GNU_TYPE -export DEB_HOST_ARCH_OS - -# Support the DEB_BUILD_OPTIONS variable -CFLAGS = -g -Wall -INSTALL = install - -ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS += -O0 -else - CFLAGS += -O2 -endif - -ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) - INSTALL += -s -endif - - -DESTDIR=`pwd`/debian/tmp - -conf_args = \ - --cache-file=./config.cache \ - --with-fhs \ - --enable-shared \ - --enable-static \ - --prefix=/usr \ - --sysconfdir=/etc \ - --libdir=/etc/samba \ - --with-privatedir=/etc/samba \ - --with-piddir=/var/run/samba \ - --localstatedir=/var \ - --with-netatalk \ - --with-pam \ - --with-syslog \ - --with-utmp \ - --with-readline \ - --with-pam_smbpass \ - --with-libsmbclient \ - --with-winbind \ - --with-msdfs \ - --with-automount \ - --with-tdbsam \ - --with-ldap \ - --with-python=python2.3 - -ifeq ($(DEB_HOST_ARCH_OS),linux) - conf_args += \ - --with-smbmount \ - --with-acl-support \ - --with-quotas - mount_cifs = yes - smbfs = yes -else - conf_args += --without-quotas - mount_cifs = no - smbfs = no -endif - -ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) - conf_args += --build $(DEB_HOST_GNU_TYPE) -else - conf_args += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) -endif - -patch: patch-stamp -patch-stamp: - dh_testdir - if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi - touch patch-stamp - -unpatch: - dh_testdir - if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi - rm -f patch-stamp - -configure: patch-stamp configure-stamp -configure-stamp: - dh_testdir - - if [ -f debian/config.cache ]; then \ - cp -f debian/config.cache source/config.cache; \ - fi - - [ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure $(conf_args)) - - touch configure-stamp - -build: patch-stamp configure-stamp build-stamp -build-stamp: - dh_testdir - - $(MAKE) -C source headers - $(MAKE) -C source all nsswitch/libnss_wins.so python_ext -ifeq ($(mount_cifs),yes) - $(MAKE) -C source client/mount.cifs -endif - - touch build-stamp - -clean: unpatch - dh_testdir - dh_testroot - rm -f build-stamp configure-stamp - - # Clean first the Samba package -# -$(MAKE) -C source realclean -# -$(MAKE) -C source clean - -$(MAKE) -C source python_clean distclean - - # Delete stuff left after a build that is not deleted by 'make clean' - rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \ - source/bin/libsmbclient.a source/client/mount.cifs \ - source/include/stamp-h - - sed -e "s/@libacl@/`type-handling any linux-gnu`/g" \ - < debian/control.in > debian/control - - dh_clean - -install: DH_OPTIONS= -install: build - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - - mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib/samba \ - $(DESTDIR)/lib/security $(DESTDIR)/sbin \ - $(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \ - $(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \ - $(DESTDIR)/usr/lib/python2.3/site-packages/samba - - # Add here commands to install the package into debian/tmp. - $(MAKE) -C source install DESTDIR=$(DESTDIR) - - # libsmbclient files are not installed by the standard - # 'make install' - do it manually. - $(MAKE) -C source installclientlib DESTDIR=$(DESTDIR) - mv $(DESTDIR)/usr/lib/samba/libsmbclient.so $(DESTDIR)/usr/lib/samba/libsmbclient.so.0.1 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so.0 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so - - # Starting with Samba 3.0.6 libsmbclient.so is installed in - # /usr/lib/samba. We don't want it there since it is not in the - # default library path. Here we move it to /usr/lib/. - mv $(DESTDIR)/usr/lib/samba/libsmbclient* \ - $(DESTDIR)/usr/lib/ - - # Install other stuff not installed by "make install" - install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd - - # Install winbind stuff not installed by 'make install' - install -m 0644 source/nsswitch/libnss_winbind.so \ - $(DESTDIR)/lib/libnss_winbind.so.2 - install -m 0644 source/bin/pam_winbind.so \ - $(DESTDIR)/lib/security/ - - # Install libnss_wins.so, which is not installed by 'make install' either. - install -m 0644 source/nsswitch/libnss_wins.so \ - $(DESTDIR)/lib/libnss_wins.so.2 - - # pam_smbpass.so isn't being installed by 'make install'. - # We'll move it here to $(DESTDIR)/lib/security/ and then - # libpam-smbpass.files will make dh_movefiles move it to the - # right location in the libpam-smbpass package. - install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/ - -ifeq ($(smbfs),yes) - # Create the symlinks that will allow us to do "mount -t smbfs ..." - # and "mount -t smb ...". Note that the source/script/installbin.sh - # tries to create the first symlink, but we have commented - # that code out and do everything here. We also create - # symlinks for the man pages. - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8 - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8 -endif - -ifeq ($(mount_cifs),yes) - # Install mount.cifs and its man page - install -m 04755 source/client/mount.cifs $(DESTDIR)/sbin/ - install -m 0644 docs/manpages/mount.cifs.8 $(DESTDIR)/usr/share/man/man8/ -endif - - # For CUPS to support printing to samba printers, it's necessary - # to make the following symlink (according to - # Erich Schubert <debian@vitavonni.de> in #109509): - ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb - - # Install man pages for files without man pages in the upstream sources - install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8 - - # We don't provide the "Using Samba" book in the swat package. - # It's provided in the samba-doc package so in the swat package - # we just provide a symlink to the real book. - ln -s ../../doc/samba-doc/htmldocs/using_samba \ - $(DESTDIR)/usr/share/samba/swat/using_samba - - # Delete unwanted stuff leftover from "make install" - - # The smbwrapper package is not being generated anymore, so we must - # delete the related man pages. - rm $(DESTDIR)/usr/share/man/man1/smbsh.1 - - # We're not providing findsmb (should we?) so let's remove the man - # pages. - find debian/ -name 'findsmb*' -exec rm -f {} \; - - # Install samba-common's conffiles - they'll get moved later to their - # correct place by dh_movefiles. - cp debian/smb.conf $(DESTDIR)/usr/share/samba/ - install -m755 debian/panic-action $(DESTDIR)/usr/share/samba/ - cp debian/gdbcommands $(DESTDIR)/etc/samba/ - cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba - install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba - - # Install the Python modules - # - # Hmmm... need to figure this out. We have lib.linux-i686-2.2 - # and lib.linux-i686-2.3 directories. Using only the stuff from - # the 2.3 directory for now. peloy.- - #cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/ - cp source/build/lib.*-*-2.3/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ - cp source/python/samba/* $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ - - dh_movefiles - -# Build architecture-independent files here. -# Pass -i to all debhelper commands in this target to reduce clutter. -binary-indep: DH_OPTIONS=-i -binary-indep: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/* -# dh_installmenu -# dh_installemacsen -# dh_installpam -# dh_installinit -# dh_installcron -# dh_installmanpages -# dh_installinfo -# dh_undocumented - dh_installchangelogs - dh_link - dh_compress - dh_fixperms - - # Get rid of those pesky .cvsignore files to make lintian happy - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_perl - dh_gencontrol - dh_md5sums - dh_builddeb - -# Build architecture-dependent files here. -# Pass -a to all debhelper commands in this target to reduce clutter. -ifeq ($(smbfs),no) - DH_EXTRAS=-Nsmbfs -endif - -binary-arch: DH_OPTIONS=-a $(DH_EXTRAS) -binary-arch: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.3-samba source/python/examples/* -# dh_installmenu - # dh_installlogrotate is not available in Debian Potato... - if [ -x /usr/bin/dh_installlogrotate ]; then \ - dh_installlogrotate; \ - else \ - mkdir -p debian/samba/etc/logrotate.d; \ - cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \ - mkdir -p debian/winbind/etc/logrotate.d; \ - cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \ - fi -# dh_installemacsen -# dh_installpam - DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19" - DH_OPTIONS= dh_installinit -pwinbind - dh_installcron -# dh_installmanpages -# dh_installinfo - cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind -# dh_undocumented - dh_installchangelogs -Nlibpam-smbpass - DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG - dh_strip --dbg-package=samba --dbg-package=smbclient - cp -a debian/smbclient-dbg/* debian/samba-dbg - rm -rf debian/smbclient-dbg - dh_link - dh_compress - dh_fixperms - - # Why this is executable, I have NO idea... - chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h - -ifeq ($(smbfs),yes) - # You may want to make some executables suid here. - # The smbmnt and smbumount binaries should be setuid-root. This - # has security implications because these programs haven't had - # a thorough security audit. smbmount _does not_ have to have - # the setuid bit set. In fact, it is a security hole. - chmod u+s debian/smbfs/usr/bin/smbmnt - chmod u+s debian/smbfs/usr/bin/smbumount -endif - - # Set some reasonable default perms for the samba logdir. - chmod 0750 debian/samba/var/log/samba/ - chown root.adm debian/samba/var/log/samba/ - - # Get rid of those pesky .cvsignore files to make lintian happy - # (maybe we only need the "find ... -exec rm -f {} ;" we have - # in the binary-indep target?) peloy.- - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_makeshlibs -# dh_perl - dh_shlibdeps - dh_gencontrol - dh_md5sums - dh_builddeb - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install configure diff --git a/packaging/Debian/debian-unstable/samba-common.config b/packaging/Debian/debian-unstable/samba-common.config deleted file mode 100644 index 766f0ddb7e..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.config +++ /dev/null @@ -1,154 +0,0 @@ -#/bin/sh -e - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -n 1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# We ask the question IFF the config contains complex options that could -# cause us to break the config. -if [ -f "$FILE" ] && grep -v dhcp.conf $FILE \ - | grep -qEi '\\$|^[[:space:]]*include[[:space:]]*=' -then - db_input high samba-common/do_debconf || true - db_go -else - db_set samba-common/do_debconf true -fi - -# If user doesn't want to use debconf to configure Samba the leave... -db_get samba-common/do_debconf || true -if [ "${RET}" = "false" ]; then - exit 0 -fi - -# User wants to use debconf, let's continue... - -# Adjust priority of the question about the workgroup name depending -# on whether a workgroup name has already being specified. -db_get samba-common/workgroup || true -if [ "${RET}" ]; then - WGPRIORITY=medium -else - WGPRIORITY=high -fi - -# Preload any values from the existing smb.conf file -if [ -f $FILE ]; then - WORKGROUP=`smbconf_retr workgroup` - if [ "$WORKGROUP" ]; then - db_set samba-common/workgroup "$WORKGROUP" - fi - - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - elif [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - - db_set samba-common/encrypt_passwords "$ENCRYPT" - fi - - CHARSET=`smbconf_retr "character set"` - CODEPAGE=`smbconf_retr "client code page"` - UNIXCHARSET=`smbconf_retr "unix charset"` - DOSCHARSET=`smbconf_retr "dos charset"` - - # If we're upgrading from an old version and there's no - # 'passdb backend' setting, add one. - if [ "$1" = "configure" -a -n "$2" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 \ - && ! grep -q -i '^[[:space:]]*passdb backend[[:space:]]*=' $FILE - then - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e' - s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)encrypt passwords/\1encrypt passwords/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*encrypt passwords[[:space:]]*=/a \ - passdb backend = smbpasswd guest - }' < $FILE > ${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi -fi - -# Get workgroup name -db_input $WGPRIORITY samba-common/workgroup || true -db_go - -# Use encrypted passwords? -db_input medium samba-common/encrypt_passwords || true -db_go - -# Handle migrating character sets -if [ -n "$CHARSET" -a -z "$UNIXCHARSET" ] -then - UNIXCHARSET=`echo $CHARSET | sed -e's/iso-/ISO/i'` - db_set samba-common/character_set "$UNIXCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/character_set || true - db_go -fi - -if [ -n "$CODEPAGE" -a -z "$DOSCHARSET" ] -then - DOSCHARSET=CP`echo $CODEPAGE | sed -e's/[[:alpha:]]*//g'` - db_set samba-common/codepage "$DOSCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/codepage || true - db_go -fi - -DHCPPRIORITY=medium -#if [ "$DEBCONF_RECONFIGURE" = 1 ] && [ -f /sbin/dhclient3 ] -if [ -f /sbin/dhclient3 ] -then - DHCPPRIORITY=high -# TODO: see if we can detect that dhcp3-client is *going* to be installed, -# even if it isn't yet. -#elif dpkg-query -W --showformat='${Status}\n' dhcp3-client | grep ??? -# unknown ok not-installed ? -# DHCPPRIORITY=high -fi - -if [ ! -f $FILE ] || grep -q -i 'wins server' $FILE -then - # check the values before and after; unset the 'applied' flag - # if they don't match. - db_get samba-common/dhcp || true - OLDDHCP="$RET" - db_input $DHCPPRIORITY samba-common/dhcp || true - db_go - db_get samba-common/dhcp || true - if [ "$OLDDHCP" != "$RET" ]; then - db_fset samba-common/dhcp applied false - fi -fi diff --git a/packaging/Debian/debian-unstable/samba-common.dhcp b/packaging/Debian/debian-unstable/samba-common.dhcp deleted file mode 100644 index c8c4b9e14a..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.dhcp +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/sh - -SAMBA_DHCP_CONF=/etc/samba/dhcp.conf -SAMBA_DHCP_CONF_INFO_FILE="" - -netbios_setup() { - # No need to continue if we're called with an unsupported option - - if [ "$reason" != BOUND ] && [ "$reason" != RENEW ] \ - && [ "$reason" != REBIND ] && [ "$reason" != REBOOT ] \ - && [ "$reason" != EXPIRE ] && [ "$reason" != FAIL ] - then - return - fi - - # Nor should we continue if no settings have changed - if [ "$new_netbios_name_servers" = "$old_netbios_name_servers" ] \ - && [ "$new_netbios_scope" = "$old_netbios_scope" ] \ - && [ -f $SAMBA_DHCP_CONF ] - then - return - fi - - # reparse our own file - local other_servers=`sed -n -e"s/[[:space:]]$interface:[^[:space:]]*//g; \ - s/^[[:space:]]*wins server[[:space:]]*=[[:space:]]*//pi" \ - $SAMBA_DHCP_CONF` - - umask 022 - - local serverlist="$other_servers" - for server in $new_netbios_name_servers - do - serverlist="$serverlist $interface:$server" - done - - echo -n > $SAMBA_DHCP_CONF - test -n "$SAMBA_DHCP_CONF_INFO_FILE" -a -f "$SAMBA_DHCP_CONF_INFO_FILE" && \ - cat "$SAMBA_DHCP_CONF_INFO_FILE" >> $SAMBA_DHCP_CONF - - # If we're updating on failure/expire, AND there are no WINS - # servers for other interfaces, leave the file empty. - if [ -z "$other_servers" ] - then - if [ "$reason" = FAIL ] || [ "$reason" = EXPIRE ] - then - return - fi - fi - - if [ -n "$serverlist" ] - then - echo " wins server =$serverlist" >> $SAMBA_DHCP_CONF - fi - if [ -n "$new_netbios_scope" ] - then - echo " netbios scope = $new_netbios_scope" >> $SAMBA_DHCP_CONF - fi -} - -# Only call netbios_setup if we're not sourced. -case "$0" in - *bin/sh|*bin/bash) : ;; - *) netbios_setup ;; -esac diff --git a/packaging/Debian/debian-unstable/samba-common.dirs b/packaging/Debian/debian-unstable/samba-common.dirs deleted file mode 100644 index c089ad7357..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.dirs +++ /dev/null @@ -1,2 +0,0 @@ -etc/samba -etc/dhcp3/dhclient-enter-hooks.d diff --git a/packaging/Debian/debian-unstable/samba-common.files b/packaging/Debian/debian-unstable/samba-common.files deleted file mode 100644 index aec13dd851..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.files +++ /dev/null @@ -1,20 +0,0 @@ -etc/samba/ -etc/dhcp3/ -etc/pam.d/ -usr/bin/net -usr/bin/nmblookup -usr/bin/smbpasswd -usr/bin/testparm -usr/share/man/man1/nmblookup.1 -usr/share/man/man1/testparm.1 -usr/share/man/man5/lmhosts.5 -usr/share/man/man5/smb.conf.5 -usr/share/man/man5/smbpasswd.5 -usr/share/man/man7/samba.7 -usr/share/man/man8/net.8 -usr/share/man/man8/smbpasswd.8 -usr/share/samba/lowcase.dat -usr/share/samba/panic-action -usr/share/samba/smb.conf -usr/share/samba/upcase.dat -usr/share/samba/valid.dat diff --git a/packaging/Debian/debian-unstable/samba-common.postinst b/packaging/Debian/debian-unstable/samba-common.postinst deleted file mode 100644 index 6c6eb9bf53..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.postinst +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# -# - -set -e - -# Do debconf stuff here -. /usr/share/debconf/confmodule - -# We need a default smb.conf file. If one doesn't exist we put in place -# one that has some basic defaults. -if [ ! -e /etc/samba/smb.conf ]; then - cp -a /usr/share/samba/smb.conf /etc/samba/ -fi - -# Static tempfile location, dpkg-style -TMPFILE=/etc/samba/smb.conf.dpkg-tmp - -# ------------------------- Debconf questions start --------------------- - -# Is the user configuring with debconf, or he/she prefers swat/manual -# config? -db_get samba-common/do_debconf || true -if [ "${RET}" = "true" ]; then - # Get workgroup name - db_get samba-common/workgroup || true - WORKGROUP="${RET}" - - # Oh my GOD, this is ugly. Why would anyone put these - # characters in a workgroup name? Why, Lord, why??? - WORKGROUP=`echo $WORKGROUP | \ - sed -e's/\\\\/\\\\\\\\/g - s#/#\\\\/#g - s/&/\\\&/g - s/\\\$/\\\\\\\$/g'` - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)workgroup[[:space:]]*=.*/\1workgroup = ${WORKGROUP}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Encrypt passwords? - db_get samba-common/encrypt_passwords || true - ENCRYPT_PASSWORDS="${RET}" - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)encrypt passwords[[:space:]]*=.*/\1encrypt passwords = ${ENCRYPT_PASSWORDS}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Install DHCP support - db_get samba-common/dhcp && DHCPVAL="$RET" - db_fget samba-common/dhcp applied || true - if [ "$DHCPVAL" = true ] && [ "$RET" != true ] && \ - ! grep -q dhcp.conf /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /wins server[[:space:]]*=/a \\ -\\ -# If we receive WINS server info from DHCP, override the options above. \\ - include = /etc/samba/dhcp.conf -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - elif [ "$RET" != true ] && grep -q dhcp.conf /etc/samba/smb.conf - then - : - # FIXME: here we /delete/ the lines? - fi - # Once we get here, the config has been applied, whatever - # it is. - if [ "$RET" != true ]; then - db_fset samba-common/dhcp applied true - fi - - # Update charset settings? - if ! grep -q "^[[:space:]]*unix charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/character_set || true - UNIXCHARSET="${RET}" - if [ -n "$UNIXCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)character set/\1character set/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*character set[[:space:]]*=/c \\ - unix charset = $UNIXCHARSET - }" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if grep -qi "^[[:space:]]*passdb backend[[:space:]]*=.*unixsam" /etc/samba/smb.conf - then - sed -e 's/^\([[:space:]]*\)passdb backend/\1passdb backend/i - /^[[:space:]]*passdb backend/ { - s/unixsam/guest/i - }' < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - - if ! grep -q "^[[:space:]]*dos charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/codepage || true - DOSCHARSET="${RET}" - if [ -n "$DOSCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)client code page/\1client code page/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*client code page[[:space:]]*=/c \\ - dos charset = $DOSCHARSET -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4 \ - && ! grep -q "^[[:space:]]*panic action[[:space:]]*=" /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/a \\ -\\ -# Do something sensible when Samba crashes: mail the admin a backtrace\\ - panic action = /usr/share/samba/panic-action %d" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - -fi - -chmod a+r /etc/samba/smb.conf - -# ------------------------- Debconf questions end --------------------- - -db_stop - -#DEBHELPER# diff --git a/packaging/Debian/debian-unstable/samba-common.postrm b/packaging/Debian/debian-unstable/samba-common.postrm deleted file mode 100644 index 8a4b6d3d55..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.postrm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -# -# - -if [ "$1" = purge ]; then - # Remove any files left in /etc/samba/ - rm -Rf /etc/samba/ -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-unstable/samba-common.templates b/packaging/Debian/debian-unstable/samba-common.templates deleted file mode 100644 index e5f7b1ae0c..0000000000 --- a/packaging/Debian/debian-unstable/samba-common.templates +++ /dev/null @@ -1,66 +0,0 @@ -Template: samba-common/character_set -Type: string -_Description: Character Set for Unix filesystem - You currently have a "character set" configured in your smb.conf. In - Samba 3.0, this option is replaced by a new option, "unix charset". - Please specify the character set you wish to use for theis new option, - which controls how Samba interprets filenames on the file system. - . - If you leave this option blank, your smb.conf will not be changed. - -Template: samba-common/codepage -Type: string -_Description: Character Set for DOS clients - You currently have a "client code page" set in your smb.conf. In Samba - 3.0, this option is replaced by the option "dos charset". Please specify - the character set you wish to use for this new option. In most cases, the - default chosen for you will be sufficient. Note that this option is not - needed to support Windows clients, it is only for DOS clients. If you - leave this option blank, your smb.conf will not be changed. - -Template: samba-common/dhcp -Type: boolean -Default: false -_Description: Modify smb.conf to use WINS settings from DHCP? - If your computer gets IP address information from a DHCP server on the - network, the DHCP server may also provide information about WINS servers - ("NetBIOS name servers") present on the network. This requires a - change to your smb.conf file so that DHCP-provided WINS settings will - automatically be read from /etc/samba/dhcp.conf. - . - You must have the dhcp3-client package installed to take advantage of this - feature. - -Template: samba-common/do_debconf -Type: boolean -Default: true -_Description: Configure smb.conf through debconf? - The rest of the configuration of Samba deals with questions that affect - parameters in /etc/samba/smb.conf, which is the file used to configure the - Samba programs (nmbd and smbd.) Your current smb.conf contains an - 'include' line or an option that spans multiple lines, which could confuse - debconf and require you to edit your smb.conf by hand to get it working - again. - . - If you don't use debconf to configure smb.conf, you will have to handle - any configuration changes yourself, and will not be able to take - advantage of periodic configuration enhancements. Therefore, use of - debconf is recommended if possible. - -Template: samba-common/workgroup -Type: string -_Description: Workgroup/Domain Name? - This controls what workgroup your server will appear to be in when queried - by clients. Note that this parameter also controls the Domain name used - with the security=domain setting. - -Template: samba-common/encrypt_passwords -Type: boolean -Default: true -_Description: Use password encryption? - Recent Windows clients communicate with SMB servers using encrypted - passwords. If you want to use clear text passwords you will need to change - a parameter in your Windows registry. It is recommended that you use - encrypted passwords. If you do, make sure you have a valid - /etc/samba/smbpasswd file and that you set passwords in there for each - user using the smbpasswd command. diff --git a/packaging/Debian/debian-unstable/samba-doc.docs b/packaging/Debian/debian-unstable/samba-doc.docs deleted file mode 100644 index 0845082145..0000000000 --- a/packaging/Debian/debian-unstable/samba-doc.docs +++ /dev/null @@ -1,8 +0,0 @@ -README -docs/Samba3-ByExample.pdf -docs/Samba3-Developers-Guide.pdf -docs/Samba3-HOWTO.pdf -docs/THANKS -docs/history -docs/htmldocs/ -docs/registry/ diff --git a/packaging/Debian/debian-unstable/samba-doc.examples b/packaging/Debian/debian-unstable/samba-doc.examples deleted file mode 100644 index e71180364c..0000000000 --- a/packaging/Debian/debian-unstable/samba-doc.examples +++ /dev/null @@ -1,2 +0,0 @@ -debian/wins2dns.awk -source/smbadduser diff --git a/packaging/Debian/debian-unstable/samba.config b/packaging/Debian/debian-unstable/samba.config deleted file mode 100644 index 300b19a2e8..0000000000 --- a/packaging/Debian/debian-unstable/samba.config +++ /dev/null @@ -1,92 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -n 1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# Babysit users who don't read README.Debian -if [ -n "$2" ] && dpkg --compare-versions "$2" lt "2.2" -then - db_input medium samba/log_files_moved || true - db_go -fi - -db_input medium samba/run_mode || true -db_go - - -# Offer to move the password database for existing users -if [ "$1" = "configure" -a -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - FILE=/etc/samba/smb.conf - PASSDB="" - if [ -f "$FILE" ]; then - PASSDB=`smbconf_retr "passdb backend"` - fi - TDBPRIORITY=medium - if echo "$PASSDB" | grep -q ldapsam; then - TDBPRIORITY=low - fi - db_get samba-common/do_debconf || true - if [ "${RET}" = "false" ]; then - TDBPRIORITY=low - fi - - db_input "$TDBPRIORITY" samba/tdbsam || true -fi - -# We vary the priority of the next question depending on whether -# the password database already exists... -if [ -e /etc/samba/smbpasswd -o -e /var/lib/samba/passdb.tdb ]; then - PRIORITY="low" -else - # If 'encrypt passwords' is true in smb.conf, and smbpasswd - # does not exist, default to yes here. - FILE=/etc/samba/smb.conf - if [ -f "$FILE" ]; then - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - fi - if [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - fi - db_set samba/generate_smbpasswd "$ENCRYPT" - fi - PRIORITY="medium" -fi - -db_input $PRIORITY samba/generate_smbpasswd || true -db_go diff --git a/packaging/Debian/debian-unstable/samba.cron.daily b/packaging/Debian/debian-unstable/samba.cron.daily deleted file mode 100644 index 42fc98d8f6..0000000000 --- a/packaging/Debian/debian-unstable/samba.cron.daily +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh -# -# cron script to save a backup copy of /etc/samba/smbpasswd in /var/backups. -# -# Written by Eloy A. Paris <peloy@debian.org> for the Debian project. -# - -BAK=/var/backups - -umask 022 -if cd $BAK; then - # Make sure /etc/samba/smbpasswd exists - if [ -f /etc/samba/smbpasswd ]; then - cmp -s smbpasswd.bak /etc/samba/smbpasswd || cp -p /etc/samba/smbpasswd smbpasswd.bak - fi -fi diff --git a/packaging/Debian/debian-unstable/samba.dirs b/packaging/Debian/debian-unstable/samba.dirs deleted file mode 100644 index a58e4e9892..0000000000 --- a/packaging/Debian/debian-unstable/samba.dirs +++ /dev/null @@ -1,7 +0,0 @@ -usr/bin -usr/sbin -var/log/samba -var/lib/samba/printers/W32X86 -var/lib/samba/printers/WIN40 -var/run/samba -var/cache/samba diff --git a/packaging/Debian/debian-unstable/samba.docs b/packaging/Debian/debian-unstable/samba.docs deleted file mode 100644 index 7949c615b0..0000000000 --- a/packaging/Debian/debian-unstable/samba.docs +++ /dev/null @@ -1,4 +0,0 @@ -README -Roadmap -WHATSNEW.txt -docs/htmldocs/Samba3-HOWTO/diagnosis.html diff --git a/packaging/Debian/debian-unstable/samba.files b/packaging/Debian/debian-unstable/samba.files deleted file mode 100644 index c308ec7715..0000000000 --- a/packaging/Debian/debian-unstable/samba.files +++ /dev/null @@ -1,16 +0,0 @@ -usr/bin/smbstatus -usr/bin/smbcontrol -usr/bin/tdbbackup -usr/bin/pdbedit -usr/sbin/smbd -usr/sbin/nmbd -usr/sbin/mksmbpasswd -usr/lib/samba/vfs -usr/share/man/man1/smbcontrol.1 -usr/share/man/man1/smbstatus.1 -usr/share/man/man8/nmbd.8 -usr/share/man/man8/pdbedit.8 -usr/share/man/man8/smbd.8 -usr/share/man/man8/mksmbpasswd.8 -usr/share/man/man8/tdbbackup.8 - diff --git a/packaging/Debian/debian-unstable/samba.init b/packaging/Debian/debian-unstable/samba.init deleted file mode 100644 index c4e19ee54c..0000000000 --- a/packaging/Debian/debian-unstable/samba.init +++ /dev/null @@ -1,90 +0,0 @@ -#!/bin/sh -# -# Start/stops the Samba daemons (nmbd and smbd). -# -# - -# Defaults -RUN_MODE="daemons" - -# Reads config file (will override defaults above) -[ -r /etc/default/samba ] && . /etc/default/samba - -NMBDPID=/var/run/samba/nmbd.pid -SMBDPID=/var/run/samba/smbd.pid - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemons are there -test -x /usr/sbin/nmbd -a -x /usr/sbin/smbd || exit 0 - -. /lib/lsb/init-functions - -case "$1" in - start) - log_daemon_msg "Starting Samba daemons" "nmbd" - - if ! start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/nmbd -- -D; then - log_end_msg 1 - exit 1 - fi - - if [ "$RUN_MODE" != "inetd" ]; then - log_progress_msg "smbd" - if ! start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/smbd -- -D; then - log_end_msg 1 - exit 1 - fi - fi - - log_end_msg 0 - ;; - stop) - log_daemon_msg "Stopping Samba daemons" "nmbd" - - start-stop-daemon --stop --quiet --pidfile $NMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $NMBDPID ] && ! ps h `cat $NMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by nmbd itself IMHO.) - rm -f $NMBDPID - fi - - if [ "$RUN_MODE" != "inetd" ]; then - log_progress_msg "smbd" - start-stop-daemon --stop --quiet --pidfile $SMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by smbd itself IMHO.) - rm -f $SMBDPID - fi - fi - - log_end_msg 0 - - ;; - reload) - log_daemon_msg "Reloading /etc/samba/smb.conf" "smbd only" - - start-stop-daemon --stop --signal HUP --pidfile $SMBDPID - - log_end_msg 0 - ;; - restart|force-reload) - $0 stop - sleep 1 - $0 start - ;; - *) - echo "Usage: /etc/init.d/samba {start|stop|reload|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 diff --git a/packaging/Debian/debian-unstable/samba.logrotate b/packaging/Debian/debian-unstable/samba.logrotate deleted file mode 100644 index 57f4228a7c..0000000000 --- a/packaging/Debian/debian-unstable/samba.logrotate +++ /dev/null @@ -1,21 +0,0 @@ -/var/log/samba/log.smbd { - weekly - missingok - rotate 7 - postrotate - invoke-rc.d --quiet samba reload > /dev/null - endscript - compress - notifempty -} - -/var/log/samba/log.nmbd { - weekly - missingok - rotate 7 - postrotate - [ ! -f /var/run/samba/nmbd.pid ] || kill -HUP `cat /var/run/samba/nmbd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-unstable/samba.pamd b/packaging/Debian/debian-unstable/samba.pamd deleted file mode 100644 index e2c7a99356..0000000000 --- a/packaging/Debian/debian-unstable/samba.pamd +++ /dev/null @@ -1,3 +0,0 @@ -@include common-auth -@include common-account -@include common-session diff --git a/packaging/Debian/debian-unstable/samba.postinst b/packaging/Debian/debian-unstable/samba.postinst deleted file mode 100644 index 0fb03f8768..0000000000 --- a/packaging/Debian/debian-unstable/samba.postinst +++ /dev/null @@ -1,230 +0,0 @@ -#!/bin/sh -e -# -# Post-installation script for the Samba package for Debian GNU/Linux -# -# - -case "$1" in - configure) - # continue below - ;; - - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - - *) - echo "postinst called with unknown argument \`$1'" >&2 - exit 0 - ;; -esac - -# Handle debconf -. /usr/share/debconf/confmodule - -INITCONFFILE=/etc/default/samba - -# We generate several files during the postinst, and we don't want -# them to be readable only by root. -umask 022 - - -# Generate configuration file if it does not exist, using default values. -[ -r "${INITCONFFILE}" ] || { - echo Generating ${INITCONFFILE}... >&2 - cat >${INITCONFFILE} <<'EOFMAGICNUMBER1234' -# Defaults for samba initscript -# sourced by /etc/init.d/samba -# installed at /etc/default/samba by the maintainer scripts -# - -# -# This is a POSIX shell fragment -# - -# How should Samba (smbd) run? Possible values are "daemons" -# or "inetd". -RUN_MODE="" -EOFMAGICNUMBER1234 -} - -# --- Begin of FHS migration code --- - -# Starting with Samba 2.2.3-4 the WINS database, the browse -# database and other important run-time files are stored in -# FHS-compliant directories. The following code takes care of -# moving the files in the old directories (/var/samba/ and -# /var/state/samba) to the new FHS-compliant directories. - -if [ -d /var/samba/ ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.0.7-4 -then - mv /var/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/samba/ -fi - -# Default for anything we don't know about (see next two 'for' loops) -# is /var/lib/samba -- guaranteed not to accidentally tromp on any -# files the admin thought were safe. -if [ -d /var/state/samba ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.2.3-4 -then - mv /var/state/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/state/samba/ - - # It's not FHS, and it's probably our fault this is here, - # so delete it if we can. - rmdir /var/state/ 2> /dev/null || true -fi - -# All these files are now placed in their respective FHS-compliant -# directories. Separate out the individual files accordingly. -for F in browse.dat printing.tdb winbindd_cache.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/cache/samba/ - fi -done - -for F in brlock.tdb connections.tdb locking.tdb messages.tdb nmbd.pid \ - sessionid.tdb smbd.pid unexpected.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/run/samba/ - fi -done - -# Beginning with Samba 2.2.5-1, we also move the domain secrets file -# to a more suitable location, since no one really edits this by hand. -if [ -e /etc/samba/secrets.tdb -a ! -e /var/lib/samba/secrets.tdb ] -then - mv /etc/samba/secrets.tdb /var/lib/samba/ -fi - -# If upgrading from a previous 2.999 snapshot, move the passdb.tdb -# database into /var/lib. - -if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.999+3.0.alpha23-5 \ - && [ -e /etc/samba/passdb.tdb -a ! -e /var/lib/samba/passdb.tdb ] -then - mv /etc/samba/passdb.tdb /var/lib/samba/ -fi - -# --- End of FHS migration code --- - -# If upgrading from a previous 2.999 snapshot, clear the broken -# registry.tdb file. -if [ -n "$2" ] && dpkg --compare-versions "$2" gt 2.99.cvs.20020713-1 \ - && dpkg --compare-versions "$2" lt 2.999+3.0cvs20020805-1 -then - rm -f /var/lib/samba/registry.tdb -fi - -# ------------------------- Debconf questions start --------------------- - -# Run Samba as daemons or from inetd? -db_get samba/run_mode || true -RUN_MODE="${RET}" - -TMPFILE=/etc/default/samba.dpkg-tmp -sed -e "s/^[[:space:]]*RUN_MODE[[:space:]]*=.*/RUN_MODE=\"${RUN_MODE}\"/" \ - < ${INITCONFFILE} >${TMPFILE} -chmod a+r ${TMPFILE} -mv -f ${TMPFILE} ${INITCONFFILE} - -# Generate a smbpasswd file? -db_get samba/generate_smbpasswd || true -GENERATE_SMBPASSWD="${RET}" - -db_get samba/tdbsam || true -PDB_MIGRATE="${RET}" - -# Done with debconf now. -db_stop - -umask 066 - -# FIXME: disable if ldapsam support is enabled? -# FIXME: we don't want to pass these through the smbpasswd backend, -# some of the faking can cause us problems! -if [ "${GENERATE_SMBPASSWD}" = "true" -a ! -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]; then - getent passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd -fi - -umask 022 - -if [ -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb -a "$PDB_MIGRATE" = "true" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - umask 066 - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd - umask 022 - - # The database has been moved, now make sure we can still find it. - PASSDB=`sed -n -e"s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ \ - s/^[[:space:]]*passdb backend[[:space:]]*=[[:space:]]*//pi" \ - < /etc/samba/smb.conf \ - | tail -n 1` - if echo "$PASSDB" | egrep -q "(^|[[:space:]])smbpasswd"; then - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB=`echo $PASSDB | sed -e's/\(^\|[[:space:]]\)smbpasswd/\1tdbsam/'` - fi - fi - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB="tdbsam $PASSDB" - fi - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)passdb backend[[:space:]]*=.*/\1passdb backend = ${PASSDB}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf -fi - -# ------------------------- Debconf questions end --------------------- - -# Handle removal of nmbd from inetd.conf, which is no longer a supported -# configuration. -if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4; then - update-inetd --remove netbios-ns -fi - -# We want to add these entries to inetd.conf commented out. Otherwise -# UDP traffic could make inetd to start nmbd or smbd right during -# the configuration stage. -if [ -z "$2" ]; then - update-inetd --add "#<off># netbios-ssn stream tcp nowait root /usr/sbin/tcpd /usr/sbin/smbd" -fi - -if [ "$RUN_MODE" = "daemons" ]; then - update-inetd --disable netbios-ssn -else - update-inetd --enable netbios-ssn -fi - -# This check is a safety net: the /etc/samba/smbpasswd file must have -# permissions 600. -if [ -f /etc/samba/smbpasswd ]; then - chmod 600 /etc/samba/smbpasswd -fi - -# Do the same check for /var/backup/smbpasswd.bak, just in case. -if [ -f /var/backups/smbpasswd.bak ]; then - chmod 600 /var/backups/smbpasswd.bak -fi - -# Delete old /etc/samba/debian_config file, which is not used anymore -# now that we are using debconf. -rm -f /etc/samba/debian_config - -# Move old log files to the new location of Samba's log files -mv -f /var/log/nmb* /var/log/samba/ 2> /dev/null || true -mv -f /var/log/smb* /var/log/samba/ 2> /dev/null || true - -#DEBHELPER# - -exit 0 diff --git a/packaging/Debian/debian-unstable/samba.postrm b/packaging/Debian/debian-unstable/samba.postrm deleted file mode 100644 index b79fe1d009..0000000000 --- a/packaging/Debian/debian-unstable/samba.postrm +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh -e -# -# - -if [ "$1" = purge ]; then - - # Remove Samba's state files, both volatile and non-volatile - rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba - - # Remove log files - rm -Rf /var/log/samba/ - - # Remove init.d configuration file - echo Removing configuration file /etc/default/samba... >&2 - rm -f /etc/default/samba - - # Remove NetBIOS entries from /etc/inetd.conf - update-inetd --remove netbios-ssn - -else - # Not purging, do not remove NetBIOS entries from /etc/inetd.conf - update-inetd --disable netbios-ssn - -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-unstable/samba.prerm b/packaging/Debian/debian-unstable/samba.prerm deleted file mode 100644 index ab62c706d8..0000000000 --- a/packaging/Debian/debian-unstable/samba.prerm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -e - -if [ "$1" = upgrade -a -n "$2" ] && dpkg --compare-versions "$2" lt 2.99 \ - && [ -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ] -then - pdbedit -i tdbsam -e smbpasswd - rm -f /var/lib/samba/passdb.tdb -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-unstable/samba.templates b/packaging/Debian/debian-unstable/samba.templates deleted file mode 100644 index ce503aea5c..0000000000 --- a/packaging/Debian/debian-unstable/samba.templates +++ /dev/null @@ -1,50 +0,0 @@ -Template: samba/generate_smbpasswd -Type: boolean -Default: false -_Description: Create samba password database, /var/lib/samba/passdb.tdb? - To be compatible with the defaults in most versions of Windows, Samba must - be configured to use encrypted passwords. This requires user passwords to - be stored in a file separate from /etc/passwd. This file can be created - automatically, but the passwords must be added manually (by you or the - user) by running smbpasswd, and you must arrange to keep it up-to-date in - the future. If you do not create it, you will have to reconfigure samba - (and probably your client machines) to use plaintext passwords. See - /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc - package for more details. - -Template: samba/log_files_moved -Type: note -_Description: Samba's log files have moved. - Starting with the first packages of Samba 2.2 for Debian the log files for - both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The - names of the files are log.nmbd and log.smbd, for nmbd and smbd - respectively. - . - The old log files that were in /var/log/ will be moved to the new location - for you. - -Template: samba/nmbd_from_inetd -Type: note -_Description: Running nmbd from inetd is no longer supported - Your system was previously configured to start nmbd and smbd from inetd. - As of version 2.999+3.0.alpha20-4, nmbd will no longer be started from - inetd. If you have modified your /etc/init.d/samba startup script, you - may need to adjust it by hand now so that nmbd will start. - -Template: samba/run_mode -Type: select -_Choices: daemons, inetd -Default: daemons -_Description: How do you want to run Samba? - The Samba daemon smbd can run as a normal daemon or from inetd. Running as - a daemon is the recommended approach. - -Template: samba/tdbsam -Type: boolean -Default: false -_Description: Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb? - Samba 3.0 introduces a newer, more complete SAM database interface which - supersedes the /etc/samba/smbpasswd file. Would you like your existing - smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you - plan to use another pdb backend (e.g., LDAP) instead, you should answer - 'no' here. diff --git a/packaging/Debian/debian-unstable/scripts/patch-source b/packaging/Debian/debian-unstable/scripts/patch-source deleted file mode 100755 index a8559b4167..0000000000 --- a/packaging/Debian/debian-unstable/scripts/patch-source +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -e -# -# - -for patch in debian/patches/*.patch; do - echo '->'`basename $patch`: - patch -p1 --ignore-whitespace < $patch -done - -# This code is currently not used because it creates a long version -# number string. For now we're sticking to <upstream version>-Debian, -# as in 3.0.0rc2-Debian. peloy@debian.org.- - -# ---- Begin unused code ---- -# Get Debian version number from 1st line of the Debian changelog -#DEBIAN_VERSION=`sed -n -e '1s/^.*(\(.*\)).*$/\1/p' debian/changelog` - -# Insert Debian version number in source/VERSION, which will then be -# used to create source/include/version.h. -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1\"Debian-${DEBIAN_VERSION}\"/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION -# ---- End unused code ---- - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) - -exit 0 diff --git a/packaging/Debian/debian-unstable/scripts/unpatch-source b/packaging/Debian/debian-unstable/scripts/unpatch-source deleted file mode 100755 index 3ded1150ba..0000000000 --- a/packaging/Debian/debian-unstable/scripts/unpatch-source +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh -e -# -# - -# We want to reverse the patches in the opposite order we applied -# them, hence the 'ls|sort -r'. -for patch in `ls debian/patches/*.patch | sort -r`; do - patch -p1 -R --ignore-whitespace < $patch -done - -# Unused code. See comment in the patch-source script. - -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) - -exit 0 diff --git a/packaging/Debian/debian-unstable/smb.conf b/packaging/Debian/debian-unstable/smb.conf deleted file mode 100644 index 3de3e7c506..0000000000 --- a/packaging/Debian/debian-unstable/smb.conf +++ /dev/null @@ -1,237 +0,0 @@ -# -# Sample configuration file for the Samba suite for Debian GNU/Linux. -# -# -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options most of which -# are not shown in this example -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentary and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command -# "testparm" to check that you have not many any basic syntactic -# errors. -# - -#======================= Global Settings ======================= - -[global] - -## Browsing/Identification ### - -# Change this to the workgroup/NT-domain name your Samba server will part of - workgroup = DEBIAN_FANS - -# server string is the equivalent of the NT Description field - server string = %h server (Samba %v) - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable its WINS Server -; wins support = no - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# This will prevent nmbd to search for NetBIOS names through DNS. - dns proxy = no - -# What naming service and in what order should we use to resolve host names -# to IP addresses -; name resolve order = lmhosts host wins bcast - - -#### Debugging/Accounting #### - -# This tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 1000 - -# If you want Samba to only log through syslog then set the following -# parameter to 'yes'. -; syslog only = no - -# We want Samba to log a minimum amount of information to syslog. Everything -# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log -# through syslog you should set the following parameter to something higher. - syslog = 0 - -# Do something sensible when Samba crashes: mail the admin a backtrace - panic action = /usr/share/samba/panic-action %d - - -####### Authentication ####### - -# "security = user" is always a good idea. This will require a Unix account -# in this server for every user accessing the server. See -# /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html -# in the samba-doc package for details. -; security = user - -# You may wish to use password encryption. See the section on -# 'encrypt passwords' in the smb.conf(5) manpage before enabling. - encrypt passwords = no - -# If you are using encrypted passwords, Samba will need to know what -# password database type you are using. - passdb backend = tdbsam - - obey pam restrictions = yes - -; guest account = nobody - invalid users = root - -# This boolean parameter controls whether Samba attempts to sync the Unix -# password with the SMB password when the encrypted SMB password in the -# passdb is changed. -; unix password sync = no - -# For Unix password sync to work on a Debian GNU/Linux system, the following -# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for -# sending the correct chat script for the passwd program in Debian Potato). - passwd program = /usr/bin/passwd %u - passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . - -# This boolean controls whether PAM will be used for password changes -# when requested by an SMB client instead of the program listed in -# 'passwd program'. The default is 'no'. -; pam password change = no - - -########## Printing ########## - -# If you want to automatically load your printer list rather -# than setting them up individually then you'll need this -; load printers = yes - -# lpr(ng) printing. You may wish to override the location of the -# printcap file -; printing = bsd -; printcap name = /etc/printcap - -# CUPS printing. See also the cupsaddsmb(8) manpage in the -# cupsys-client package. -; printing = cups -; printcap name = cups - -# When using [print$], root is implicitly a 'printer admin', but you can -# also give this right to other users to add drivers and set printer -# properties -; printer admin = @ntadmin - - -######## File sharing ######## - -# Name mangling options -; preserve case = yes -; short preserve case = yes - - -############ Misc ############ - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting -; include = /home/samba/etc/smb.conf.%m - -# Most people will find that this option gives better performance. -# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html -# for details -# You may want to add the following on a Linux system: -# SO_RCVBUF=8192 SO_SNDBUF=8192 - socket options = TCP_NODELAY - -# The following parameter is useful only if you have the linpopup package -# installed. The samba maintainer and the linpopup maintainer are -# working to ease installation and configuration of linpopup and samba. -; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & - -# Domain Master specifies Samba to be the Domain Master Browser. If this -# machine will be configured as a BDC (a secondary logon server), you -# must set this to 'no'; otherwise, the default behavior is recommended. -; domain master = auto - -# Some defaults for winbind (make sure you're not using the ranges -# for something else.) -; idmap uid = 10000-20000 -; idmap gid = 10000-20000 -; template shell = /bin/bash - -#======================= Share Definitions ======================= - -[homes] - comment = Home Directories - browseable = no - -# By default, the home directories are exported read-only. Change next -# parameter to 'yes' if you want to be able to write to them. - writable = no - -# File creation mask is set to 0700 for security reasons. If you want to -# create files with group=rw permissions, set next parameter to 0775. - create mask = 0700 - -# Directory creation mask is set to 0700 for security reasons. If you want to -# create dirs. with group=rw permissions, set next parameter to 0775. - directory mask = 0700 - -# Un-comment the following and create the netlogon directory for Domain Logons -# (you need to configure Samba to act as a domain controller too.) -;[netlogon] -; comment = Network Logon Service -; path = /home/samba/netlogon -; guest ok = yes -; writable = no -; share modes = no - -[printers] - comment = All Printers - browseable = no - path = /tmp - printable = yes - public = no - writable = no - create mode = 0700 - -# Windows clients look for this share name as a source of downloadable -# printer drivers -[print$] - comment = Printer Drivers - path = /var/lib/samba/printers - browseable = yes - read only = yes - guest ok = no -# Uncomment to allow remote administration of Windows print drivers. -# Replace 'ntadmin' with the name of the group your admin users are -# members of. -; write list = root, @ntadmin - -# A sample share for sharing your CD-ROM with others. -;[cdrom] -; comment = Samba server's CD-ROM -; writable = no -; locking = no -; path = /cdrom -; public = yes - -# The next two parameters show how to auto-mount a CD-ROM when the -# cdrom share is accesed. For this to work /etc/fstab must contain -# an entry like this: -# -# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 -# -# The CD-ROM gets unmounted automatically after the connection to the -# -# If you don't want to use auto-mounting/unmounting make sure the CD -# is mounted on /cdrom -# -; preexec = /bin/mount /cdrom -; postexec = /bin/umount /cdrom - diff --git a/packaging/Debian/debian-unstable/smbclient.files b/packaging/Debian/debian-unstable/smbclient.files deleted file mode 100644 index 96e8945bf3..0000000000 --- a/packaging/Debian/debian-unstable/smbclient.files +++ /dev/null @@ -1,15 +0,0 @@ -usr/bin/smbclient -usr/bin/smbtar -usr/bin/rpcclient -usr/bin/smbspool -usr/bin/smbtree -usr/bin/smbcacls -usr/bin/smbcquotas -usr/share/man/man1/smbclient.1 -usr/share/man/man1/smbtar.1 -usr/share/man/man1/rpcclient.1 -usr/share/man/man8/smbspool.8 -usr/share/man/man1/smbcacls.1 -usr/share/man/man1/smbcquotas.1 -usr/share/man/man1/smbtree.1 -usr/lib/cups/backend/smb diff --git a/packaging/Debian/debian-unstable/smbfs.files b/packaging/Debian/debian-unstable/smbfs.files deleted file mode 100644 index 359754ebf9..0000000000 --- a/packaging/Debian/debian-unstable/smbfs.files +++ /dev/null @@ -1,12 +0,0 @@ -sbin/mount.smbfs -sbin/mount.smb -sbin/mount.cifs -usr/bin/smbmount -usr/bin/smbumount -usr/bin/smbmnt -usr/share/man/man8/smbmount.8 -usr/share/man/man8/smbumount.8 -usr/share/man/man8/smbmnt.8 -usr/share/man/man8/mount.smb.8 -usr/share/man/man8/mount.smbfs.8 -usr/share/man/man8/mount.cifs.8 diff --git a/packaging/Debian/debian-unstable/smbwrapper.dirs b/packaging/Debian/debian-unstable/smbwrapper.dirs deleted file mode 100644 index fd727bddf0..0000000000 --- a/packaging/Debian/debian-unstable/smbwrapper.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/bin -usr/share/samba diff --git a/packaging/Debian/debian-unstable/smbwrapper.docs b/packaging/Debian/debian-unstable/smbwrapper.docs deleted file mode 100644 index 2924e78734..0000000000 --- a/packaging/Debian/debian-unstable/smbwrapper.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/smbwrapper/README -source/smbwrapper/PORTING diff --git a/packaging/Debian/debian-unstable/smbwrapper.files b/packaging/Debian/debian-unstable/smbwrapper.files deleted file mode 100644 index 08edbead6e..0000000000 --- a/packaging/Debian/debian-unstable/smbwrapper.files +++ /dev/null @@ -1 +0,0 @@ -usr/bin/smbsh diff --git a/packaging/Debian/debian-unstable/swat.config b/packaging/Debian/debian-unstable/swat.config deleted file mode 100644 index e210fae55e..0000000000 --- a/packaging/Debian/debian-unstable/swat.config +++ /dev/null @@ -1,11 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -db_title "Samba Web Administration Tool (SWAT)" - -db_input medium swat/smb_conf_warn || true -db_go diff --git a/packaging/Debian/debian-unstable/swat.dirs b/packaging/Debian/debian-unstable/swat.dirs deleted file mode 100644 index d5df7df4b8..0000000000 --- a/packaging/Debian/debian-unstable/swat.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/sbin -usr/share/samba/swat diff --git a/packaging/Debian/debian-unstable/swat.files b/packaging/Debian/debian-unstable/swat.files deleted file mode 100644 index 82fdf104d3..0000000000 --- a/packaging/Debian/debian-unstable/swat.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin/swat -usr/share/samba/swat -usr/share/man/man8/swat.8 diff --git a/packaging/Debian/debian-unstable/swat.postinst b/packaging/Debian/debian-unstable/swat.postinst deleted file mode 100644 index 338f8a07c2..0000000000 --- a/packaging/Debian/debian-unstable/swat.postinst +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -case "$1" in - configure) - ;; - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - *) - echo "$0: Unknown action \"$1\"" - exit 0 - ;; -esac - -# Set up swat, turned off by default. -update-inetd --group OTHER --add \ - '#<off># swat\t\tstream\ttcp\tnowait.400\troot\t/usr/sbin/tcpd\t/usr/sbin/swat' - -#DEBHELPER# diff --git a/packaging/Debian/debian-unstable/swat.postrm b/packaging/Debian/debian-unstable/swat.postrm deleted file mode 100644 index 6bc5873096..0000000000 --- a/packaging/Debian/debian-unstable/swat.postrm +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# -# - -case "$1" in - purge) - update-inetd --remove '/usr/sbin/swat$' - ;; - remove) - ;; - upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) - ;; - *) - echo "$0: unknown action \"$1\"" - exit 0 - ;; -esac - -#DEBHELPER# - -exit 0 - diff --git a/packaging/Debian/debian-unstable/swat.templates b/packaging/Debian/debian-unstable/swat.templates deleted file mode 100644 index 3407f7efbc..0000000000 --- a/packaging/Debian/debian-unstable/swat.templates +++ /dev/null @@ -1,6 +0,0 @@ -Template: swat/smb_conf_warn -Type: note -_Description: Your smb.conf will be re-written! - SWAT will rewrite your smb.conf file. It will rearrange the entries and - delete all comments, include= and copy= options. If you have a carefully - crafted smb.conf then back it up or don't use SWAT! diff --git a/packaging/Debian/debian-unstable/winbind.dirs b/packaging/Debian/debian-unstable/winbind.dirs deleted file mode 100644 index 1da8fba83a..0000000000 --- a/packaging/Debian/debian-unstable/winbind.dirs +++ /dev/null @@ -1 +0,0 @@ -usr/share/lintian/overrides diff --git a/packaging/Debian/debian-unstable/winbind.files b/packaging/Debian/debian-unstable/winbind.files deleted file mode 100644 index fbb76774d4..0000000000 --- a/packaging/Debian/debian-unstable/winbind.files +++ /dev/null @@ -1,9 +0,0 @@ -usr/sbin/winbindd -usr/bin/wbinfo -usr/bin/ntlm_auth -usr/share/man/man1/wbinfo.1 -usr/share/man/man1/ntlm_auth.1 -usr/share/man/man8/winbindd.8 -lib/security/pam_winbind.so -lib/libnss_winbind.so.2 -lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-unstable/winbind.init b/packaging/Debian/debian-unstable/winbind.init deleted file mode 100644 index 18e342597b..0000000000 --- a/packaging/Debian/debian-unstable/winbind.init +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/sh -# -# Start/stops the winbindd daemon. -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -DAEMON=/usr/sbin/winbindd - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemon is there -test -x $DAEMON || exit 0 - -. /lib/lsb/init-functions - -case "$1" in - start) - log_daemon_msg "Starting the Winbind daemon" "winbind" - - start-stop-daemon --start --quiet --exec $DAEMON - - log_end_msg $? - ;; - - stop) - log_daemon_msg "Stopping the Winbind daemon" "winbind" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - - log_end_msg $? - ;; - - restart|force-reload) - log_daemon_msg "Restarting the Winbind daemon" "winbind" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - sleep 2 - start-stop-daemon --start --quiet --exec $DAEMON - - log_end_msg $? - ;; - *) - echo "Usage: /etc/init.d/winbind {start|stop|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 - diff --git a/packaging/Debian/debian-unstable/winbind.lintian b/packaging/Debian/debian-unstable/winbind.lintian deleted file mode 100644 index fca17d3cca..0000000000 --- a/packaging/Debian/debian-unstable/winbind.lintian +++ /dev/null @@ -1,6 +0,0 @@ -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_winbind.so lib/libnss_winbind.so.2 libnss_winbind.so -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_wins.so lib/libnss_wins.so.2 libnss_wins.so -winbind: no-shlibs-control-file lib/libnss_winbind.so.2 -winbind: no-shlibs-control-file lib/libnss_wins.so.2 -winbind: postinst-must-call-ldconfig lib/libnss_wins.so.2 -winbind: postrm-should-call-ldconfig lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-unstable/winbind.logrotate b/packaging/Debian/debian-unstable/winbind.logrotate deleted file mode 100644 index e36cd1281c..0000000000 --- a/packaging/Debian/debian-unstable/winbind.logrotate +++ /dev/null @@ -1,10 +0,0 @@ -/var/log/samba/log.winbindd { - weekly - missingok - rotate 7 - postrotate - [ -f /var/run/samba/winbindd.pid ] && kill -HUP `cat /var/run/samba/winbindd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-unstable/wins2dns.awk b/packaging/Debian/debian-unstable/wins2dns.awk deleted file mode 100644 index 176868a115..0000000000 --- a/packaging/Debian/debian-unstable/wins2dns.awk +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/awk -f -# -# Date: Wed, 26 Aug 1998 10:37:39 -0600 (MDT) -# From: Jason Gunthorpe <jgg@deltatee.com> -# To: samba@packages.debian.org -# Subject: Nifty samba script -# -# Here is a really nifty script I just wrote for samba, it takes the wins -# database in /var/samba/wins and writes out two dns files for it. In this -# way network wide wins clients can get into the dns for use by unix -# machines. -# -# Perhaps this could be included in /usr/doc/examples or somesuch. -# - -BEGIN { - FS="#|\""; -FORWARD="/tmp/wins.hosts" -REVERSE="/tmp/wins.rev" -DOMAIN="ven.ra.rockwell.com" -} -$3 == "00" { - split($4,a," " ); - split(a[2],b,"."); - while (sub(" ","-",$2)); - $2=tolower($2); - if (b[1] == "255") - next; - if (length($2) >= 8) - print $2"\ta\t"a[2] > FORWARD - else - print $2"\t\ta\t"a[2] > FORWARD - print b[4]"."b[3]"\t\tptr\t"$2"."DOMAIN"." > REVERSE -} -END { - system("echo killall -HUP named"); -} - diff --git a/packaging/Debian/debian-woody/README.build b/packaging/Debian/debian-woody/README.build deleted file mode 100644 index 0a11a1f6ea..0000000000 --- a/packaging/Debian/debian-woody/README.build +++ /dev/null @@ -1,397 +0,0 @@ -From: Steve Langasek <vorlon@netexpress.net> -To: "Eloy A. Paris" <eloy.paris@usa.net> -Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT) -Subject: Re: autobuilder failure on arm for samba-2.2.1a-3 -In-Reply-To: <20010823100906.A1092@antenas> -Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net> -MIME-Version: 1.0 -Content-Type: TEXT/PLAIN; charset=US-ASCII - -On Thu, 23 Aug 2001, Eloy A. Paris wrote: - -> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote: - -> > Hmm. Maybe the thing to do is to focus on getting config.cache (not log, -> > cache) support into the package. Issues like this are frequent enough with -> > Samba, and the configure tests add enough time to the build process, that I -> > think there'd be much benefit in being able to step past a lot of these. - -> Uhhmmm... I don't know, I guess I don't like much the idea of -> maintaining a config.cache. It looks like extra work plus a -> compilation process that is "synthetic" or atificial. What happens if -> the Samba Team adds a new test, or modifies the configure script, will -> the config.cache pick those up? - -> In any case, you are the expert, so if you think that's the way to go, -> and the burden far exceeds the problems we have right now I say let's -> go for it. I am not well versed on autoconf and the configure process, -> that's all... - -Well, I'll attach my work to the bottom of this message and let you judge it -for yourself. - -The config.cache I'm trying to generate here is not equivalent to what -a configure script outputs. The only values I'm including are those which 1) -are no-brainers on any glibc-based platform, 2) are questions we need to force -a particular value for regardless of the kernel being built against, or 3) are -questions about specific bizarre features of proprietary Unices that we'll -always get an answer of 'no' to. - -I've removed all of the config.cache variables related to headers, or to -checks for particular libraries; I think it's pretty safe to assert that glibc -provides basic C functions like select(), setenv(), and waitpid() on all our -build targets, but I think it's less safe to assert that they'll always be -provided by particular header files. - -So the config.cache won't automatically be updated with answers to new -configure tests, but it also doesn't need to in order to be useful. There's -really only a handful of variables in there that we /need/ in order to -guarantee correctly-built packages, and if you want to leave out everything -else, that's perfectly ok too. Everything from the fifth stanza on down is -just a build-time speed-up for some of the slower architectures. Well, it -also has the fringe benefit that the packages will FAIL to build if someone -tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture. I -see that as a plus :), you may disagree, but in any case my next trick would -be to add a global variable developers can set to bypass the provided -config.cache. - - -It is a little artificial, but the whole point of .debs is to be able to build -binaries in a controlled environment. Right now, we don't really have control -over what happens in the autobuilders. We have even /less/ control over what -happens in a stable release: it's been two weeks now since I built binaries -for bug #94380, and they haven't been uploaded to security.d.o yet. I'm -guessing they won't be uploaded until Wichert is back from vacation, either -- -which is fine, but it would be nice if we didn't have to worry about -mis-builds by the security team, or about putting the security team to extra -trouble after the fact to get packages fixed. - -With a pre-loaded config.cache, we can ensure that bugs of this kind don't -happen in woody. We can take the arm autobuilder problem into our own hands, -and not have to worry about quirkiness in the build environment. We can even -close bug #109773, since we no longer have to worry about detecting the -setuid() routines. - - -So to me, it definitely seems worth it. But you're the maintainer, and I -won't ask you to put anything in the package that you're not comfortable with. - - -> By the way, I think I remember someone was able to build 2.2.x succesfully on -> the ARM. If this is the case, could it be that there's something weird -> with Phillip's setup? - -It could be. There are arm packages for 2.2.1a-1, so at /some/ point the -autobuilder was able to pass the locking test. - - -> P.S. How did you know about the ARM build problems? I don't see any -> bugs about this... - -<http://ftp-master.debian.org/testing/>, follow the links for samba... The -exact reference for the arm autobuilder is at -<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>. - -Regards, -Steve Langasek -postmodern programmer - - -diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog ---- samba-2.2.1a-bak/debian/changelog Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/changelog Thu Aug 23 10:28:08 2001 -@@ -1,3 +1,12 @@ -+samba (2.2.1a-4.1) unstable; urgency=low -+ -+ * Fix up the build system to avoid needing to run configure as root to -+ answer questions we already know the answers to. -+ * In the process, make surprising progress towards being able to -+ cross-compile the samba packages. -+ -+ -- Steve Langasek <vorlon@debian.org> Wed, 22 Aug 2001 23:35:00 -0500 -+ - samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. -diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache ---- samba-2.2.1a-bak/debian/config.cache Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,231 @@ -+# -+# 22 August 2001 Steve Langasek <vorlon@debian.org> -+# -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs. It is not useful on other systems. -+# If it contains results you don't want to keep, you may remove or edit it. -+# -+# By default, configure uses ./config.cache as the cache file, -+# creating it if it does not exist already. You can give configure -+# the --cache-file=FILE option to use a different cache file; that is -+# what configure does when it calls configure scripts in -+# subdirectories, so they share the cache. -+# Giving --cache-file=/dev/null disables caching, for debugging configure. -+# config.status only pays attention to the cache file if you give it the -+# --recheck option to rerun configure. -+# -+# -+# This config.cache file contains a list of acceptable autoconf -+# values which can be used in compiling Samba for Debian woody/sid. -+# -+# Autoconf sorts options alphabetically in its output. This file -+# groups options logically. -+ -+ -+# Load any architecture-specific settings -+if [ -n "$DEB_HOST_GNU_TYPE" \ -+ -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then -+ . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -+fi -+ -+ -+# This is at the top because it's most in need of regular tweaking. -+# These are options which are supported on 2.4 kernels, but not on 2.2 -+# kernels. -+ -+samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -+samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -+samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} -+ -+ -+# These are present in 2.2 kernels, but not in 2.0... -+ -+samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -+samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} -+ -+ -+# POSIX ACL support not present in Linux 2.2; not allowed in the -+# Debian packages, even if present on the build machine. -+ -+ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no} -+ -+ -+# Various basic libc/compiler stuff that it's blindingly obvious that -+# Linux supports (now watch me get bitten for saying that) -+ -+ac_cv_c_const=${ac_cv_c_const=yes} -+ac_cv_c_inline=${ac_cv_c_inline=inline} -+samba_cv_volatile=${samba_cv_volatile=yes} -+ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -+ac_cv_func_bzero=${ac_cv_func_bzero=yes} -+ac_cv_func_chmod=${ac_cv_func_chmod=yes} -+ac_cv_func_chown=${ac_cv_func_chown=yes} -+ac_cv_func_chroot=${ac_cv_func_chroot=yes} -+ac_cv_func_connect=${ac_cv_func_connect=yes} -+ac_cv_func_dup2=${ac_cv_func_dup2=yes} -+ac_cv_func_execl=${ac_cv_func_execl=yes} -+ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -+ac_cv_func_fchown=${ac_cv_func_fchown=yes} -+ac_cv_func_fstat=${ac_cv_func_fstat=yes} -+ac_cv_func_fsync=${ac_cv_func_fsync=yes} -+ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -+ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -+ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -+ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -+ac_cv_func_glob=${ac_cv_func_glob=yes} -+ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -+ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -+ac_cv_func_llseek=${ac_cv_func_llseek=yes} -+ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -+ac_cv_func_memmove=${ac_cv_func_memmove=yes} -+ac_cv_func_memset=${ac_cv_func_memset=yes} -+ac_cv_func_mktime=${ac_cv_func_mktime=yes} -+ac_cv_func_pipe=${ac_cv_func_pipe=yes} -+ac_cv_func_poll=${ac_cv_func_poll=yes} -+ac_cv_func_pread=${ac_cv_func_pread=yes} -+ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -+ac_cv_func_rand=${ac_cv_func_rand=yes} -+ac_cv_func_random=${ac_cv_func_random=yes} -+ac_cv_func_readlink=${ac_cv_func_readlink=yes} -+ac_cv_func_rename=${ac_cv_func_rename=yes} -+ac_cv_func_select=${ac_cv_func_select=yes} -+ac_cv_func_setenv=${ac_cv_func_setenv=yes} -+ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -+ac_cv_func_setsid=${ac_cv_func_setsid=yes} -+ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -+ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -+ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -+ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -+ac_cv_func_srand=${ac_cv_func_srand=yes} -+ac_cv_func_srandom=${ac_cv_func_srandom=yes} -+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -+ac_cv_func_strchr=${ac_cv_func_strchr=yes} -+ac_cv_func_strdup=${ac_cv_func_strdup=yes} -+ac_cv_func_strerror=${ac_cv_func_strerror=yes} -+ac_cv_func_strftime=${ac_cv_func_strftime=yes} -+ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -+ac_cv_func_symlink=${ac_cv_func_symlink=yes} -+ac_cv_func_usleep=${ac_cv_func_usleep=yes} -+ac_cv_func_utime=${ac_cv_func_utime=yes} -+ac_cv_func_utimes=${ac_cv_func_utimes=yes} -+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -+ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -+ac_cv_type_size_t=${ac_cv_type_size_t=yes} -+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -+samba_cv_socklen_t=${samba_cv_socklen_t=yes} -+ -+# Yes, we know Linux supports fcntl locking. Just ignore -+# any errors caused by building on an NFS mount. -+samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} -+ -+ -+# smbwrapper doesn't work because the glibc maintainers don't want -+# to support transparent userland VFS. We might as well preempt -+# any checks for shadowed symbols that are only useful for smbwrapper. -+ -+ac_cv_func___acl=${ac_cv_func___acl=no} -+ac_cv_func__acl=${ac_cv_func__acl=no} -+ac_cv_func___chdir=${ac_cv_func___chdir=no} -+ac_cv_func__chdir=${ac_cv_func__chdir=no} -+ac_cv_func___close=${ac_cv_func___close=no} -+ac_cv_func__close=${ac_cv_func__close=no} -+ac_cv_func___closedir=${ac_cv_func___closedir=no} -+ac_cv_func__closedir=${ac_cv_func__closedir=no} -+ac_cv_func___dup=${ac_cv_func___dup=no} -+ac_cv_func__dup=${ac_cv_func__dup=no} -+ac_cv_func___dup2=${ac_cv_func___dup2=no} -+ac_cv_func__dup2=${ac_cv_func__dup2=no} -+ac_cv_func___facl=${ac_cv_func___facl=no} -+ac_cv_func__facl=${ac_cv_func__facl=no} -+ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -+ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -+ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -+ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -+ac_cv_func___fork=${ac_cv_func___fork=no} -+ac_cv_func__fork=${ac_cv_func__fork=no} -+ac_cv_func___fstat=${ac_cv_func___fstat=no} -+ac_cv_func__fstat=${ac_cv_func__fstat=no} -+ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -+ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -+ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -+ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -+ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -+ac_cv_func___getdents=${ac_cv_func___getdents=no} -+ac_cv_func__getdents=${ac_cv_func__getdents=no} -+ac_cv_func___llseek=${ac_cv_func___llseek=no} -+ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -+ac_cv_func__llseek=${ac_cv_func__llseek=no} -+ac_cv_func___lseek=${ac_cv_func___lseek=no} -+ac_cv_func__lseek=${ac_cv_func__lseek=no} -+ac_cv_func___lstat=${ac_cv_func___lstat=no} -+ac_cv_func__lstat=${ac_cv_func__lstat=no} -+ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -+ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -+ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -+ac_cv_func___open=${ac_cv_func___open=no} -+ac_cv_func__open=${ac_cv_func__open=no} -+ac_cv_func___open64=${ac_cv_func___open64=no} -+ac_cv_func__open64=${ac_cv_func__open64=no} -+ac_cv_func___opendir=${ac_cv_func___opendir=no} -+ac_cv_func__opendir=${ac_cv_func__opendir=no} -+ac_cv_func___pread=${ac_cv_func___pread=no} -+ac_cv_func__pread=${ac_cv_func__pread=no} -+ac_cv_func___pread64=${ac_cv_func___pread64=no} -+ac_cv_func__pread64=${ac_cv_func__pread64=no} -+ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -+ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -+ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -+ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -+ac_cv_func___read=${ac_cv_func___read=no} -+ac_cv_func__read=${ac_cv_func__read=no} -+ac_cv_func___readdir=${ac_cv_func___readdir=no} -+ac_cv_func__readdir=${ac_cv_func__readdir=no} -+ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -+ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -+ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -+ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -+ac_cv_func___stat=${ac_cv_func___stat=no} -+ac_cv_func__stat=${ac_cv_func__stat=no} -+ac_cv_func___stat64=${ac_cv_func___stat64=no} -+ac_cv_func__stat64=${ac_cv_func__stat64=no} -+ac_cv_func___telldir=${ac_cv_func___telldir=no} -+ac_cv_func__telldir=${ac_cv_func__telldir=no} -+ac_cv_func___write=${ac_cv_func___write=no} -+ac_cv_func__write=${ac_cv_func__write=no} -+ac_cv_func___xstat=${ac_cv_func___xstat=no} -+ -+ -+ -+# Miscellaneous stuff that isn't, and shouldn't be, available -+# in Debian. Those interested in building debs for other systems may -+# need to remove some of these defines. -+ -+ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -+ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -+ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -+ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -+ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -+ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -+ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -+ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -+ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -+ac_cv_func_setluid=${ac_cv_func_setluid=no} -+ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -+ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -+ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -+ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -+ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -+ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -+ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -+ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -+ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -+ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -+ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -+ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} -diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux ---- samba-2.2.1a-bak/debian/config.cache.alpha-linux Wed Dec 31 18:00:00 1969 -+++ samba-2.2.1a/debian/config.cache.alpha-linux Thu Aug 23 10:28:08 2001 -@@ -0,0 +1,12 @@ -+# 22 Aug 2001 Steve Langasek <vorlon@debian.org> -+ -+# This file contains autoconf settings specific to the alpha-linux -+# platform that should be preloaded when building for this architecture. -+ -+ -+# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -+# Linux 2.4 does. Ensure that packages compiled for woody remain -+# compatible with 2.2 kernels, even if the build machine is running 2.4. -+samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -+samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} -diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules ---- samba-2.2.1a-bak/debian/rules Thu Aug 23 10:27:54 2001 -+++ samba-2.2.1a/debian/rules Thu Aug 23 10:28:08 2001 -@@ -15,6 +15,14 @@ - # This has to be exported to make some magic below work. - export DH_OPTIONS - -+# Set the host and build architectures for use with config.cache loading, -+# cross-building, etc. -+DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -+DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -+ -+export DEB_HOST_GNU_TYPE -+export DEB_BUILD_GNU_TYPE -+ - BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb - - DESTDIR=`pwd`/debian/samba -@@ -48,8 +56,11 @@ - # ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ - # --localstatedir=/var - -+ if [ -f debian/config.cache ]; then \ -+ cp -f debian/config.cache source/config.cache; \ -+ fi - # [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp) -- [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) -+ [ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) - - touch configure-stamp - diff --git a/packaging/Debian/debian-woody/README.build-upstream b/packaging/Debian/debian-woody/README.build-upstream deleted file mode 100644 index 24d2c1c93c..0000000000 --- a/packaging/Debian/debian-woody/README.build-upstream +++ /dev/null @@ -1,78 +0,0 @@ -Building Samba Packages for Debian GNU/Linux --------------------------------------------- - -Building Debian packages is not as hard as some people might think. -The following instructions will allow you to build your own Samba -Debian packages. These instructions and the files in packaging/Debian/ -are current as of Samba 3.0.0, and allow you to build Debian packages -for Debian unstable (so you need some development packages available -only in Debian unstable.) If you are using something newer than 3.0.0 -you might want to try to follow the instructions to see if patches -apply cleanly. If some patches don't apply cleanly please e-mail -samba@packages.debian.org since we might have fixed patches that we have -not yet integrated into upstream Samba. - -We try to maintain as much compatibility with previous releases -of Debian as possible, so it is possible that the files in -packaging/Debian/ can also be used to build Samba Debian packages for -other Debian releases. However, sometimes this is just not possible -because we need to use stuff that is only available on Debian unstable. - -Instructions ------------- - -If you want to build Samba packages for Debian and you just want to use -upstream sources, i.e. you don't want to wait for us to put official -packages out, or you want packages for a Debian version for which we -don't provide deb's, or you don't want to use official packages, or -you want to add --this-cool-switch to configure, or whatever, follow -these instructions: - -0) Make sure you have the following packages installed (in addition -to the normal Debian development packages -- dpkg-dev, libc6-dev, -devscripts, etc.): - - autoconf - debhelper - libpam0g-dev - libreadline4-dev - libcupsys2-dev - acl-dev, libacl1 - libkrb5-dev - libldap2-dev - python2.2-dev - - Notes regarding the packages required to build Samba Debian packages: - - * The libcupsys2-dev is not available in Debian Potato (Debian 2.2). - That's fine; the configure script won't detect CUPS support and the - resulting binaries won't support CUPS. - - * The list above is current as of samba-3.0.0rc2, but it can get - out of date. The best way to check what packages are required to - build the samba packages on Debian is to look for the Build-Depends: - field in the file debian/control. - -1) cd samba[-<version>]. For example, "cd samba-3.0.0rc2". -2) cp -a packaging/Debian/debian/ debian - It's important that you copy instead of symlink because the build - tools in Potato have a problem that prevents the build to work with - a symlink. -3) dch -i (this is completely optional - only do it if you understand - Debian version numbers! Don't complain later if you can't upgrade - to official versions of the Samba packages for Debian.) - - Edit the changelog and make sure the version is right. For example, - for Samba 3.0.0beta3, the version number should something like - 3.0.0beta3-0.1. -4) Run 'debian/rules binary'. - - It is better that you prefix the above command with 'fakeroot'. - If you have problems you might try building as root. -5) That's it. Your new packages should be in ../. Install with dpkg. - -Please e-mail samba@packages.debian.org with comments, questions or -suggestions. Please talk to us and not to the Samba Team. They have -better things to do and know nothing about the Debian packaging system. - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-woody/README.debian b/packaging/Debian/debian-woody/README.debian deleted file mode 100644 index 4afe04f6df..0000000000 --- a/packaging/Debian/debian-woody/README.debian +++ /dev/null @@ -1,183 +0,0 @@ -0. Samba Team Notes: -This package is targeted at the woody release of debian distribution -running on a 2.4.x kernel. -This package has been made by Simo Sorce on behalf of the Samba Team. -Do not use Debian BTS to report bugs, it's not a debian project package. -Thanks to Eloy Paris and Steve "Vorlon" Langasek for the work they've done -and continue to do on debian unstable packages. That made me possible to -build up debian packages for the Team. - - -ATTENTION: This package works correctly only with recent 2.4.x kernels due to -deep optimizations that samba uses when compiled on such kernels. - - -Original README.Debian foolows. ------------------------------------------------------------------------------ - -Samba for Debian ----------------- - -This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek -<vorlon@debian.org>, current maintainers of the Samba packages for Debian, -based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew -Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael -Meskes <meskes@topsystem.de>, all previous maintainers of the packages -samba and sambades (merged together for longer than we can remember.) - -Contents of this README file: - -1. Notes -2. Upgrading from Samba 2.2 -3. Packages Generated from the Samba Sources -4. Support for NT Domains -5. Reporting bugs - - -1. Notes --------- - -- As of Samba 2.0.6-1, the Debian version of Samba is compiled with - Pluggable Authentication Modules (PAM) support. PAM support was - discontinued during the libc5 -> libc6 migration process and I never - brought it back until 2.0.6-1. - -- The smbfs package does not support the 2.0.x Linux kernels anymore. - This has been the case since the very first packages of the CVS sources - that eventually became Samba 2.2. To use the smbfs package you need to - run a 2.2.x kernel or later. - -- Starting with the Debian packages for Samba 2.2, the Samba log files (for - nmbd and smbd) have been moved to a new location: /var/log/samba/. The - files also have new names: log.nmbd and log.smbd. The old files - (/var/log/{nmb,smb} were moved to the new location. - - -2. Upgrading from Samba 2.2 ---------------------------- - -Samba 3.0 provides greatly improved support for modern Windows systems, -including support for Unicode and LDAP. In the process, Samba 3.0 -necessarily also breaks backward compatiblity with past releases. These -issues are documented herein; if you are aware of other problems related -to upgrading from Samba 2.2, please let us know at -<samba@packages.debian.org>. - -Samba and LDAP --------------- -Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with -LDAP support. However, the LDAP schema for Samba 3.0 differs -substantially from the schema used by many sites with Samba 2.2 (not -enabled in the Debian packages). If upgrading from an LDAP-enabled 2.2, -you will need to run the convertSambaAccount script found in -/usr/share/doc/samba-doc/examples/LDAP. A copy of the schema itself can -also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema. - -Character Sets --------------- -Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with -Windows clients. Owing to the close similarity between Windows and Unix -NLS charsets, in the past, many users were able to pass filenames -containing non-ASCII characters between clients and servers without -configuring Samba to know what character set was in use. Now, Samba -must be able to convert Unix filenames to Unicode before sending to the -client, so Samba must know what character set the filenames are being -converted from. If you will be sharing files with non-ASCII names, and -the filenames are not encoded with UTF-8, you will need to tell Samba -which character set to use with the 'unix charset' option. - -If you had previously specified 'character set' and 'client code page' -options under 2.2, these settings should be automatically converted for -you. - - -3. Packages Generated from the Samba Sources --------------------------------------------- - -Currently, the Samba sources produce the following binary packages: - -samba: A LanManager like file and printer server for Unix. -samba-common: Samba common files used by both the server and the client. -smbclient: A LanManager like simple client for Unix. -swat: Samba Web Administration Tool -samba-doc: Samba documentation. -smbfs: Mount and umount commands for the smbfs (works with 2.2.x and - above kernels, not with 2.0.x kernels.) -libpam-smbpass: pluggable authentication module for SMB password - database. -libsmbclient: Shared library that allows applications to talk to SMB servers. -libsmbclient-dev: libsmbclient shared libraries. -winbind: Service to resolve user and group information from a Windows NT - server. -python2.2-samba: Python bindings that allow access to various aspects of - Samba. - -Please note that the package smbwrapper (a shared library that provides -SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4 -does not exist any more. The reason is that starting with Samba 2.0.6-1, that -code does not even compile, and the upstream author (Andrew Tridgell) -recommended to disable the compilation of smbwrapper until some issues -with glibc2.1 get cleared out (the problem is with glibc, not with Samba -itself). - - -4. Support for NT Domains -------------------------- - -Samba 2.2 includes preliminary support for NT domains. A Samba server -can now be part of a Windows NT domain whose Primary Domain Controller -is a Windows NT server. This feature is supposed to be stable although I -haven't tried it myself. Read the documentation in the samba-doc package -for help on how to do this (hint: "security = domain" in the smb.conf -file). - -Samba 2.2 has also experimental support for Primary Domain -Controller. This means that a Samba server can act now as a PDC. There -are no special flags needed to compile Samba with NT domain PDC -support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation -section). - -Please note that NT domain PDC support is far from complete and is still -experimental. - - -5. Reporting Bugs ------------------ - -**** NOTE: This package is distributed by the Samba Team based on Debian - packages, please submit bus to https://bugzilla.samba.org instead **** - -If you believe you have found a bug please make sure the possible bug -also exists in the latest version of Samba that is available for the -unstable Debian distribution. If you are running Debian stable this -means that you will probably have to build your own packages. And if the -problem does not exist in the latest version of Samba we have packaged it -means that you will have to run the version of Samba you built yourself -since it is not easy to upload new packages to the stable distribution, -unless they fix critical security problems. - -If you can reproduce the problem in the latest version of Samba then -it is likely to be a real bug. Your best shot is to search the Samba -mailing lists to see if it is something that has already been reported -and fixed - if it is a simple fix we can add the patch to our packages -without waiting for a new Samba release. - -If you decide that your problem deserves to be submitted to the Debian -Bug Tracking System (BTS) we expect you to be responsive if we request -more information. If we request more information and do not receive -any in a reasonable time frame expect to see your bug closed without -explanation - we can't fix bugs we can't reproduce, and most of the -time we need more information to be able to reproduce them. - -When submitting a bug to the Debian BTS please include the version of -the Debian package you are using as well as the Debian distribution you -are using. Think _twice_ about the severity you assign to the bug: we -are _very_ sensitive about bug severities; the fact that it doesn't -work for you doesn't mean that the severity must be such that it holds -a major Debian release. In fact, that it doesn't work for you it -doesn't mean that it doesn't work for others. So again: think _twice_. - - -Eloy A. Paris <peloy@debian.org> -Steve Langasek <vorlon@debian.org> - diff --git a/packaging/Debian/debian-woody/TODO b/packaging/Debian/debian-woody/TODO deleted file mode 100644 index 5883f72a92..0000000000 --- a/packaging/Debian/debian-woody/TODO +++ /dev/null @@ -1,4 +0,0 @@ -Nothing in our list right now. - -Debian Samba Maintainers.- -Sun Apr 6 01:34:21 EST 2003 diff --git a/packaging/Debian/debian-woody/changelog b/packaging/Debian/debian-woody/changelog deleted file mode 100644 index d05fabac05..0000000000 --- a/packaging/Debian/debian-woody/changelog +++ /dev/null @@ -1,2400 +0,0 @@ -samba (3.0.20b-1woody1) stable; urgency=low - - * samba 3.0.20b release - - -- Simo Sorce <idra@samba.org> Sun, 23 October 2005 19:26:00 +0200 - -samba (3.0.14a-1) stable; urgency=high - - * samba 3.0.14a release - - -- Simo Sorce <idra@samba.org> Thu, 21 April 2005 12:30:00 +0200 - -samba (3.0.13-1) stable; urgency=high - - * samba 3.0.13 release - - -- Simo Sorce <idra@samba.org> Sun, 27 March 2005 21:00:00 +0200 - -samba (3.0.12-1) stable; urgency=low - - * samba 3.0.12 release - - -- Simo Sorce <idra@samba.org> Sun, 20 March 2005 18:38:00 +0100 - -samba (3.0.11-1) stable; urgency=low - - * samba 3.0.11 release - - -- Simo Sorce <idra@samba.org> Mon, 07 February 2005 09:22:00 +0100 - -samba (3.0.10-1) stable; urgency=low - - * samba 3.0.10 release - - -- Simo Sorce <idra@samba.org> Mon, 26 December 2004 13:50:00 +0100 - -samba (3.0.9-1) stable; urgency=low - - * samba 3.0.9 release - * added profiles utility to main .deb - * added mount.cifs .deb - - -- Simo Sorce <idra@samba.org> Mon, 26 November 2004 12:13:00 +0100 - -samba (3.0.8-1) stable; urgency=low - - * samba 3.0.8 release - - -- Simo Sorce <idra@samba.org> Mon, 9 November 2004 11:02:00 +0200 - -samba (3.0.7-2) stable; urgency=low - - * fix a segmentation fault in smbcacls - * fix 2 annoying pdbldap related bugs - - -- Simo Sorce <idra@samba.org> Mon, 11 October 2004 12:22:00 +0200 - -samba (3.0.7-1) stable; urgency=high - - * samba 3.0.7 *Security* release - * See CAN-2004-0807 & CAN-2004-0808 - - -- Simo Sorce <idra@samba.org> Mon, 13 September 2004 14:40:00 +0200 - -samba (3.0.6-1) stable; urgency=low - - * samba 3.0.6 release - - -- Simo Sorce <idra@samba.org> Fri, 20 August 2004 10:19:00 +0200 - -samba (3.0.5-1) stable; urgency=low - - * samba 3.0.5 release - * Security Fix Release - - -- Simo Sorce <idra@samba.org> Tue, 27 July 2004 15:15:00 +0200 - -samba (3.0.4-1) stable; urgency=low - - * samba 3.0.4 release - * some more fixes in packaging - * fixes wrong patch for fhs compatible paths - - -- Simo Sorce <idra@samba.org> Tue, 11 May 2004 11:55:00 +0100 - -samba (3.0.3-1) stable; urgency=low - - * samba 3.0.3 release - * some more fixes in packaging - - -- Simo Sorce <idra@samba.org> Wed, 05 May 2004 03:19:00 +0100 - -samba (3.0.2a-1) stable; urgency=low - - * samba 3.0.2a release - * use original source and patch agains it - - -- Simo Sorce <idra@samba.org> Sun, 15 Feb 2004 18:36:00 +0100 - -samba (3.0.2-1) stable; urgency=low - - * samba 3.0.2 release - * fix piddir in fhs.patch to match the init scripts - - -- Simo Sorce <idra@samba.org> Tue, 10 Feb 2004 16:24:00 +0100 - -samba (3.0.1-3) stable; urgency=low - - * Make sure we install *.dat unicode tables files - * Make sure we have the correct pam file for woody - * Fix interactive menu configuration - - -- Simo Sorce <idra@samba.org> Fri, 19 Dec 2003 13:13:00 +0100 - -samba (3.0.1-2) stable; urgency=low - - * Make sure we distribute also ntlm_auth - - -- Simo Sorce <idra@samba.org> Fri, 19 Dec 2003 13:13:00 +0100 - -samba (3.0.1-1) stable; urgency=low - - * Samba Team Release - * NOTE: this package works correctly only on recent 2.4.x kernels - - -- Simo Sorce <idra@samba.org> Fri, 19 Dec 2003 13:13:00 +0100 - -samba (3.0.0-2) unstable; urgency=low - - * Samba Team Release 2 - * Fixes woody dependencies problem with acl and attr packages - - -- Simo Sorce <idra@samba.org> Thu, 28 Sep 2003 12:42:00 +0200 - -samba (3.0.0-1) unstable; urgency=low - - * Samba Team Release - - -- Simo Sorce <idra@samba.org> Thu, 25 Sep 2003 00:26:00 +0200 - -samba (3.0.0beta2+3.0.0rc4-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Sep 2003 08:47:56 -0400 - -samba (3.0.0beta2+3.0.0rc3-1) unstable; urgency=low - - * New upstream release. Last Release Candidate according to the - Samba Team. Samba 3.0.0 is around the corner, in a week or so. - - Fixes use of non-PIC code in nss shared libraries (closes: #208773) - - 'unix password sync' option now runs the unix password program as - root again (closes: #209739). - * One-line patch to make packages buildable with distcc (closes: #210227) - - -- Eloy A. Paris <peloy@debian.org> Tue, 9 Sep 2003 07:57:16 -0400 - -samba (3.0.0beta2+3.0.0rc2-1) unstable; urgency=low - - * New upstream release. - * Incorporate Dutch debconf translations; thanks to Bart Cornelis - <cobaco@linux.be>. (closes: #207824) - * Link against libgnutls7 instead of libgnutls5. (closes: #208151) - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Sep 2003 21:37:13 -0400 - -samba (3.0.0beta2+3.0.0rc1-1) unstable; urgency=low - - * New upstream version (skipped samba 3.0.0beta3 due to time - constraints.) This ugly version number will go away when the final - Samba 3.0.0 is released. - * Drag new unpackaged tools into the packages: smbcquotas (smbclient), - vfs modules (samba), smbtree(1) manpage (smbclient), tdbbackup(8) - manpage (samba). (closes: #151158) - * Switch to DH_COMPAT level 4: - - no explicit conffile listings needed - - the postinst for libsmbclient is now completely autogenerated - - use the default init script handling (with support for - invoke-rc.d) in debhelper, instead of the currently buggy upgrade - path (closes: #185439) - - add support for ${misc:Depends} in control for those packages with - init scripts - * Add versioned dependency on libpam-runtime and change - /etc/pam.d/samba to use the new common PAM config blocks. - * New python2.3-samba package (old python2.2-samba is no more.) - (closes: #206171) - - -- Eloy A. Paris <peloy@debian.org> Mon, 25 Aug 2003 17:05:14 -0400 - -samba (3.0.0beta2-1) unstable; urgency=low - - * New upstream release - - The smb.conf(5) manpage documents config options again - (closes: #197963). - - Handling of winbind/idmap has been restructured; domain members - should be able to map domain accounts to local accounts again - (closes: #196815). - - Use the locale charset for 'display charset' by default - (closes: #194406). - - Fix for segfault in smbclient when using the -b option - (closes: #196833). - - Handle an empty 'passdb backend' list gracefully (closes: #193946). - * Don't set 'display charset' anymore on upgrade, since this is now - grabbed from the locale by default -- a much better option. - * Removed time.c.patch which is now in the upstream sources. - * Update FHS patch for two new tdb files (netsamlogon_cache.tdb, - privilege.tdb). - * Remove python-linker.patch, since the Kerberos package has been - fixed to no longer use rpath - * Remove configure.patch: the hppa glibc bug this was added for is - long since fixed, and upstream isn't interested in supporting this - kludge. - * Update references to missing documentation in sample smb.conf file - (closes: #187632). - * Fix handling of krb5 link line, building on a patch from Stefan - Metzmacher <metze@metzemix.de>. - * Add patch so smbclient's tar support works with popt - (closes: #194921). - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Jul 2003 20:59:09 -0500 - -samba (3.0.0beta1-2) unstable; urgency=low - - * Update build-deps to libacl1-dev (>= 2.2.11-1), libacl1 (>= 2.2.11-1) - to make sure we get the right shlib dependencies (closes: #193149). - * Update the dhcp config hooks so they're suitable for sourcing (i.e., - don't call "exit") (closes: #196477). - * Bring package into line with current policy by adding support for - the DEB_BUILD_OPTIONS flag, and enabling debugging symbols (-gstabs) - by default - * Make sure libpam-smbpass is a self-contained DSO. - * Fix a typo in samba-common.dhcp that caused us to spuriously rewrite - the server list. - * Fix python install script to ignore -Wl linker flags, as seen in the - output from the latest krb5-config. - * Add LDAP and Unicode information about upgrading from 2.2 to - README.debian. - * Remove dangerous and confusing browse options from the default - smb.conf (closes: #198804). - * Reorder smb.conf options for clearer grouping, and clarify the - comments. - * Add a default [print$] share to the sample smb.conf, and create the - necessary tree under /var/lib/samba/printers. (closes: #168173) - * s/winbind/idmap/ in smb.conf, since the option names have changed. - * Fix the patch for postexec handling, so that we chdir("/") at the - right time. - - -- Steve Langasek <vorlon@debian.org> Thu, 12 Jun 2003 15:02:00 -0500 - -samba (3.0.0beta1-1) unstable; urgency=low - - * New upstream version. - - fix for empty browselist bug (closes: #194553) - - fix for tab completion segfault in smbclient (closes: #194776) - - Samba now works as a domain member again without segfaulting - (closes: #194134, #194394, #194775) - - WinXP machines can join a Samba-controlled domain again - (closes: #195362) - * Build-depend on python-dev >= 2.2 instead of on just python-dev - (without version). - * Added Vorlon'n patch to source/lib/time.c to fix #194075. - (closes: #194075) - - -- Eloy A. Paris <peloy@debian.org> Sun, 8 Jun 2003 22:26:43 -0400 - -samba (2.999+3.0.alpha24-3) unstable; urgency=low - - * Make sure Samba DSOs are compiled with -fPIC. (closes: #194324) - * Rebuild against pristine Kerberos libs, to squelch warnings about - versioned symbols. (closes: #194431, #194396) - - -- Steve Langasek <vorlon@debian.org> Thu, 22 May 2003 15:32:00 -0500 - -samba (2.999+3.0.alpha24-2) unstable; urgency=low - - * Fixed description of the smbfs package. (closes: #194183) - * Negate the sense of the unixsam check when upgrading. (closes: #194234) - - -- Steve Langasek <vorlon@debian.org> Wed, 21 May 2003 12:21:53 -0400 - -samba (2.999+3.0.alpha24-1) unstable; urgency=low - - * New upstream version. (closes: #189354) - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 May 2003 13:55:57 -0400 - -samba (2.999+3.0.alpha23-5) unstable; urgency=low - - * Move the python package from section "net" to section "python". - * Make sure we use PIC code for python on all platforms. - * French translation of an additional debconf template, courtesy of - Christian Perrier <bubulle@debian.org>. (closes: #188832) - * Updated Brazilian Portuguese translation from André LuÃs Lopes - <andrelop@ig.com.br>. - * s/unixsam/guest/ everywhere, since the unixsam backend is now - deprecated. (closes: #190095) - * Create our temp config file as /etc/samba/smb.conf.dpkg-tmp; not - only does using /tmp violate SELinux policies, it introduces the - possibility of data loss during the final copy if /tmp is a separate - filesystem. (closes: #189823) - * Pull in fix for SWAT, so that logins work again - (closes: #188255, #192077). - * Move passdb.tdb into /var/lib/samba, since it's not user-editable. - * Make sure with don't ship any .cvsignore files. - * Don't ship examples for python2.2-samba and samba-doc in an - "examples" directory inside another "examples" directory. - - -- Eloy A. Paris <peloy@debian.org> Tue, 6 May 2003 12:05:46 -0400 - -samba (2.999+3.0.alpha23-4) unstable; urgency=low - - * Instead of s/LPT1:/LPT:/, we need to do s/LPT:/LPT1:/ -- now all - non-RPC printing clients are working again. - * Change shlibs to 0 instead of 0.1. The library already in the - archive is using this soname, and there are no packages depending - on libsmbclient, so skip changing the package name for now. - (closes: #188661) - - -- Steve Langasek <vorlon@debian.org> Fri, 11 Apr 2003 14:42:00 -0500 - -samba (2.999+3.0.alpha23-3) unstable; urgency=low - - * Put the Samba Python modules in /usr/lib/python2.2/site-packages/, - not in /usr/lib/python2.2/lib-dynload/. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Apr 2003 19:49:25 -0400 - -samba (2.999+3.0.alpha23-2) unstable; urgency=low - - * New package python2.2-samba that includes the Python modules - included in the Samba sources. Feedback on these modules and the new - package is welcome, as we (Debian Samba maintainers) don't use them. - (closes: #170731, #173322) - * Move libsmbclient-dev from section "devel" to "libdevel". - * Fix panic action script to give a sensible error message instead of - an empty backtrace when we don't have permission to attach to the - process. (closes: #188164) - * Fix libpam-smbpass so that it really does something. (closes: #178245) - * Apply patch to fix printing-related segfaults. (closes: #188076) - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Apr 2003 21:40:33 -0400 - -samba (2.999+3.0.alpha23-1) unstable; urgency=high - - * new upstream release, includes security fix for DSA-262 - * tweak the debconf templates to avoid references to specific - front-ends (closes: #183718) - - -- Steve Langasek <vorlon@debian.org> Sun, 9 Mar 2003 14:58:00 -0600 - -samba (2.999+3.0.alpha21-5) unstable; urgency=low - - * touch up the package descriptions a little bit (caps, punctuation) - * remove addtosmbpass, which snuck back in when we weren't looking - * reverse the position of the wins server tag, after looking more - closely at the code (closes: #183061) - * fix a glitch in the Spanish .po that rendered it invalid, plus a typo - * updated Brazilian Portuguese templates (closes: #183295) - * fix a typo in upstream manpage (s/shave/share/) (closes: #180546) - * run sed before we run sed, to deal with crazybad special chars - in the workgroup name (!) (closes: #176717) - - -- Steve Langasek <vorlon@debian.org> Sat, 1 Mar 2003 15:14:00 -0600 - -samba (2.999+3.0.alpha21-4) unstable; urgency=low - - * add scripts to samba-common to grab the netbios-name-servers options - if we're running a DHCP client (closes: #38413) - * major rearrangement of build scripts: install target now operates on - debian/tmp, not debian/samba, so we can see when new files are - added and decide where to put them; several files that should have - been in samba-common but were in samba (for the above reason) -- - smbcacls, -- have been moved, with a replaces: added. - * Fix rc script so that whitespace is consistent between inetd and - daemon modes (closes: #174677). - * smbclient -M must always connect to port 139, because port 445 - doesn't support messaging and we can't do the port 135 stuff yet - (closes: #175292, #167859). - * Import the diff from upstream CVS, which has fixed a few bugs - (closes: #178219, #177583, #181467, #181487, #181603, #175864). - Remove a few patches of ours which are now superseded. - * Add po-debconf support to the tree, for better i18n. - * Install the libsmbclient.so symlink in the libsmbclient-dev package, - per policy (closes: #181466). - - -- Steve Langasek <vorlon@debian.org> Fri, 27 Dec 2002 00:37:00 -0600 - -samba (2.999+3.0.alpha21-3) unstable; urgency=low - - * Drop --with-ldapsam from the configure options, since this no longer - means what we thought it did. Revert patch for changing the 'passdb - backend' defaults. - * Add patch from CVS HEAD to fix pdbedit segfault; postinst script - should work better now. (Closes: #173936) - - -- Steve Langasek <vorlon@debian.org> Sun, 22 Dec 2002 13:29:00 -0600 - -samba (2.999+3.0.alpha21-2) unstable; urgency=low - - * add CONFIGDIR to the set of directories exported in the install - target, so we don't try to write to /etc/ on the autobuilders. - * Reset the default 'passdb backend' value to something sensible, so - that we don't unnecessarily break upgrading systems (closes: #173731). - - -- Steve Langasek <vorlon@debian.org> Fri, 20 Dec 2002 09:13:00 -0600 - -samba (2.999+3.0.alpha21-1) unstable; urgency=low - - * new upstream release, many patches now incorporated upstream - - -- Steve Langasek <vorlon@debian.org> Mon, 16 Dec 2002 23:39:00 -0600 - -samba (2.999+3.0.alpha20-4) unstable; urgency=low - - * Remove obsolete comments about non-existant LDAP support in the - Debian Samba packages. (Closes: #165035) - * Apply patch for segfault in pam_smbpass when using the unixsam - backend. - * Drop support for nmbd in inetd, since it's not supported by - upstream and is reported to cause problems (closes: #23243, #137726, - 165037). - * Clarify example printing configs in smb.conf (closes: #168174). - * Make sure nmbd still responds to SIGTERM if it has no interfaces to - listen on (closes: #168079). - * Fix to get samba working again on 64-bit archs, after a - pointer<->int size mismatch bug. Already fixed in upstream CVS. - * Merge fix from CVS for broken libsmbclient.h references to internal - structures (closes: #162956). - * Add a default 'panic action' for Samba that will give us genuinely - useful debugging information after a crash. - * Fixed correct patch to example configurations in the libpam-smbpass - packages (closes: #169350). - * acl-dev is not in sid anymore; Build-Depend on libacl1-dev instead - (closes: #169682). - * Only ask the user for permission to edit if there's a chance of us - damaging something. - - -- Steve Langasek <vorlon@debian.org> Mon, 18 Nov 2002 19:53:00 -0500 - -samba (2.999+3.0.alpha20-3) unstable; urgency=low - - * Make sure smbstatus behavior is sane when Samba *has* been started, - as well as when it has not (closes: #164179). Thank to Robbert Kouprie - <robbert@radium.jvb.tudelft.nl> for this patch. - * Not using 'killall' in any of the maintainer scripts (the last one - remaining was winbind.logrotate.) We now just use 'kill' to send - a SIGHUP to a specific PID (which is stored in a file in - /var/run/samba.) - * Do not depend on procps because we're not using killall anymore. - - -- Eloy A. Paris <peloy@debian.org> Tue, 15 Oct 2002 22:15:57 -0400 - -samba (2.999+3.0.alpha20-2) unstable; urgency=low - - * fix an off-by-one error in smbd/lanman.c, which should shut off the - flood of log messages (closes: #157432) - * add a --config-cache option to the configure invocation, since - autoconf 2.5 doesn't load config.cache by default (closes: #163504) - - -- Steve Langasek <vorlon@debian.org> Sat, 5 Oct 2002 01:40:00 -0500 - -samba (2.999+3.0.alpha20-1) unstable; urgency=low - - * new upstream release - - non-primary groups appear to work again (closes: #161271) - * the official beginning of the upstream 3.0 branch - * exit without error from smbstatus when no connections have - been seen yet (closes: #161489) - - -- Steve Langasek <vorlon@debian.org> Wed, 2 Oct 2002 19:02:00 -0500 - -samba (2.999+3.0cvs20020906-1) unstable; urgency=low - - * CVS update - - domain authentication works again (closes: #158698) - * Factor out common code in samba-common.config - * Handle character set settings in smb.conf on upgrade - (closes: #153913, #158770) - * Don't use killall in logrotate script; there are better ways - (closes: #160076) - * Ignore value of 'hostname lookups' for hosts allow/hosts deny - (closes: #154376) - - -- Steve Langasek <vorlon@debian.org> Sat, 7 Sep 2002 11:46:00 -0500 - -samba (2.999+3.0cvs20020829-1) unstable; urgency=low - - * CVS update. - * Move the smb.conf manpage to the samba-common package (closes: #159572) - - -- Steve Langasek <vorlon@debian.org> Thu, 29 Aug 2002 17:53:25 -0500 - -samba (2.999+3.0cvs20020827-1) unstable; urgency=low - - * CVS update. (Closes: #158508) - * Part 1 of 3 of the library separation patch that Vorlon wrote has - gone upstream - removed the patch from our patches/ directory. - * Debconf note to warn users that their smb.conf will be re-written - and changed if they use Swat to maintain it. (Closes: #158479) - * Fixed typo in samba.prerm. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Aug 2002 15:23:23 -0400 - -samba (2.999+3.0cvs20020825-2) unstable; urgency=low - - * scale back the tdbsam migration support, because of undesirable - side-effects; now always defaults to 'no'. - * strip out hyperactive library dependencies that are only needed by - smbd (closes: #155156). - * nuke any broken registry.tdb files left by previous CVS snapshots. - * support rolling back the smbpasswd->tdbsam conversion on downgrade, - since many people are likely to need to downgrade for a while. - * remove postrm handling of legacy directories, and add handling of - current ones. - - -- Steve Langasek <vorlon@debian.org> Sun, 28 Jul 2002 09:44:24 -0500 - -samba (2.999+3.0cvs20020825-1) unstable; urgency=low - - * CVS update. These packages are based on Samba 3.0alpha19 + any - code commited after 3.0alpha19 was released. - - -- Eloy A. Paris <peloy@debian.org> Sun, 25 Aug 2002 14:56:46 -0400 - -samba (2.999+3.0cvs20020723-1) unstable; urgency=medium - - * remove spurious line from samba.config - * migrate from smbpasswd to tdbsam - * re-add the pdbedit util and manpage - * compile in ldapsam support (closes: #146935) - * add PRIVATEDIR to the list of vars we override for the install - target, so Samba doesn't try to create /etc/samba (closes: #153746). - * fix makefile handling of LOGBASEDIR, so that logs always end up in - the right place (closes: 153727). - * Fixed bug in the FHS migration path that causes nmbd to read its - state from one location, but write it out to another. (closes: #154210) - * Make sure nmbd is always looking for wins.tdb in the same place. - - -- Steve Langasek <vorlon@debian.org> Fri, 19 Jul 2002 21:38:54 -0500 - -samba (2.99.cvs.20020713-1) unstable; urgency=low - - * first attempt for 3.0pre. - * only post a debconf note about moving logfiles if we're upgrading - from a version that had the logfiles in the old location - (closes: #152924). - - -- Steve Langasek <vorlon@debian.org> Sat, 13 Jul 2002 12:54:25 -0500 - -samba (2.2.5-2) unstable; urgency=low - - * No longer ship make_printerdef, which is deprecated. (closes: #63059) - * Clean up some empty directories from the samba package. - * Add call to dh_installinit for winbind rc.x symlinks (closes: #151860). - * Clean up per-package documentation lists, to reduce clutter - (closes: #147638). - * Make sure we don't ship pdbedit's man page since we are still using - smbpasswd passwords. (closes: #152208) - * move libnss_wins.so to libnss_wins.so.2, where glibc expects to find - it (closes: #148586). - * reorder postinst, so that installing samba-common from scratch loads - the debconf answers properly (closes: #151985). - * add lintian overrides for winbind, to eliminate some noise. - * rename pam_smbpass changelog to comply with policy. - - -- Steve Langasek <vorlon@debian.org> Sun, 23 Jun 2002 22:45:04 -0500 - -samba (2.2.5-1) unstable; urgency=low - - * New upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 9 Jun 2002 15:49:21 -0400 - -samba (2.2.4+2.2.5pre1-1) experimental; urgency=low - - * Getting ready for Samba 2.2.5. - * Remove patches/parse_spoolss.patch, now included upstream. - * Fixed thinko WRT POSIX ACL support, which we "half-enabled" in - 2.2.4-1. We don't use POSIX ACL support ourselves, so we'd - appreciate reports from those using this feature so we can - be sure this works. - * Fix the filename-matching algorithm used for smbtar's 'exclude' - functionality. (closes: #131571) - * Look for secrets.tdb in /var/lib/samba, and handle in the postinst. - This is not really a config file, because users don't edit it. - (closes: #147429) - * Doxygen fix for libsmbclient.h, thanks to Tommi Komulainen - <Tommi.Komulainen@iki.fi> for the patch. (closes: #144847) - - -- Eloy A. Paris <peloy@debian.org> Tue, 28 May 2002 11:33:51 -0400 - -samba (2.2.4-1) unstable; urgency=low - - * New upstream release (closes: #144713) - * Building with POSIX ACL support (closes: #137819) - * Include samples, exclude INSTALL from libpam-smbpass (closes: #145055) - * Compile with --with-automount, for NIS homedir support (closes: #123396) - * Add a proper 'flags' field to the mount entry we write to /etc/mtab; - fixes a display bug with mount (closes: #140397) - * Added logic to /etc/init.d/samba so a help message is printed out - when Samba is running from inetd _and_ we are not booting, i.e. the - user called the init script manually. Thanks to Francesco - Potorti <pot@gnu.org> for the suggestion on how to implement this. - (Closes: #139807, #140204) - * samba.postinst: added logic so we don't call /etc/init.d/samba if - we are running from inetd (this prevents the stupid help message - to be printed during package upgrades if we are running from inetd.) - * samba.prerm: idem. - * /etc/init.d/samba: delete stale PID files after nmbd and smbd are - stopped. This prevents start-stop-daemon from printing an ugly - error message when called from '/etc/init.d/samba stop'. I prefer - this than running start-stop-daemon with --oknodo because - start-stop-daemon might print other important error messages that with - --oknodo it would otherwise not print. (Closes: #102187, #109301) - * Patch from jerry@samba.org to fix parsing of spoolss structures. - - -- Eloy A. Paris <peloy@debian.org> Thu, 23 May 2002 23:16:52 -0400 - -samba (2.2.3a-7) unstable; urgency=medium - - * More README.debian updates. - * Neutralize the smb.conf 'lock dir' directive, which doesn't mean - what the FHS says it should, and causes us no end of grief. - (Closes: #122299) - * LPRng-handling patch so that jobs printed to recent versions of - LPRng show up properly as 'done' instead of 'paused' in the Windows - print queue. Thanks to Jaroslav Serdula <serdula_jaroslav@vse.sk> - for this patch. (Closes: #139458) - * Applied patch from Urban Widmark <urban@teststation.com> - (smbfs upstream maintainer) to add a '-n' option to smbmount - that does the same as mount's '-n'. (Closes: #139590) - * Minor tweak to unpatch-source so we unpatch sources in the - reverse order we patched them. - * Don't depend on grep in samba.prerm to determine if Samba was - running before the upgrade starts. - * Tweak the wording of debconf templates. - * Incorporate debconf translations for French, Spanish and Portuguese; - thanks to Carlos Valdivia Yagüe <valyag@hotpop.com> (es), - Andre Luis Lopes <andrelop@ig.com.br> (pt_BR), and Philippe - Batailler and Denis Barbier <barbier@debian.org> (fr). - (closes: #142657, #142659, #141551, #141699, #141682) - * Fixed symlinks in the swat package so the point to /usr/share/doc/ - instead of /usr/doc/. Added note to the description of the - swat packages that says that samba-doc must be installed for - the on-line documentation to work. Thanks to Torne Wuff - <torne@wolfpuppy.org.uk>. (Closes: #95437) - * 'dh_installinit -n' gives us no initscript handling -- we need to - handle all starting and stopping of daemons ourselves, which wasn't - happening in the {pre,post}rm scripts. - * Vary the priority of the debconf question "Do you want to generate - /etc/samba/smbpassd?" depending on whether the file already exists. - File exists -> priority 'medium', file does not exist -> priority - 'low'. Changed priorities of all other questions from 'high' to 'medium'. - - -- Steve Langasek <vorlon@debian.org> Sat, 20 Apr 2002 17:48:27 -0400 - -samba (2.2.3a-6) unstable; urgency=low - - * Call db_stop as soon as we're done with debconf in the postinst, to - avoid hanging bugs (closes: #137813) - * Ony call 'update-inetd --add' on first installation, just as we only - call 'update-inetd --remove' on package purge. - * Bring our shipped smb.conf closer in line with the upstream - defaults: don't twiddle the send/recv buffer sizes, since the Linux - kernel already provides a much better default setting - (closes: #80966, #80934, #137415, #133477) - * Added libnss_wins.so to the winbind package (closes: #137201) - * Updates to README.debian. - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 Mar 2002 10:57:40 -0500 - -samba (2.2.3a-5) unstable; urgency=low - - * Having multiple workgroup lines in your smb.conf, though wacky, is - perfectly valid. Account for this in samba-common.config. - (closes: #137157) - - -- Steve Langasek <vorlon@debian.org> Sun, 10 Mar 2002 21:52:51 -0600 - -samba (2.2.3a-4) unstable; urgency=low - - * Fixed typo in samba.postinst. Cosmetic fixes there as well. - * Fix to improper usage of /usr/bin/tr in samba-common config script - (closes: #137744) - - -- Steve Langasek <vorlon@debian.org> Sat, 9 Mar 2002 14:14:02 -0500 - -samba (2.2.3a-3) unstable; urgency=medium - - * Make sure /etc/init.d/samba is executable before calling it - in the postinst. Quickly checked all other maintainer scripts - to make sure we are not calling an init script if it is not - executable. (closes: #137321) - * Fix up maintainer scripts to detect if samba was not running before - an upgrade. (closes: #33520, #130534) - * Make sure /etc/samba/ is included in the samba-common package. - Closes: #137157 - - -- Steve Langasek <vorlon@debian.org> Fri, 8 Mar 2002 11:13:21 -0500 - -samba (2.2.3a-2) unstable; urgency=low - - * merge in debconf support: - - Moved all smb.conf-related questions to samba-common (smb.conf - is part of the samba-common package, not the samba package.) - - smb.conf is not a samba-common conffile anymore since it is - being managed by debconf. It is ABSOLUTELY necessary to make - sure /etc/samba/smb.conf _NEVER_ gets overwritten by changes - made via debconf. In other words, any changes made by the user - should be honored by the debconf interface. - - samba.postinst now moves old log files from /var/log/ to - /var/log/samba/. There's a Debconf note that informs the user - the log files are stored now in a new location. - - debian/control: - + Make samba depend on debconf. - - New file debian/samba.templates. - - New file debian/samba.config. - - Re-worked debian/samba.postinst. - + Got rid of all /etc/samba/debian_config sillyness. - - remove /usr/sbin/sambaconfig; "dpkg-reconfigure samba" replaces - it. - - Removed debian/samba.prerm. - - Cleaned up /etc/init.d/samba. - + Added infrastructure for debconf. - + Got rid of all /etc/samba/debian_config sillyness. - + Got rid of /etc/samba/smbpasswd conversion stuff for - compatibility with versions of Samba < 2.0.0final-2. - (closes: #127959, #34408, #113594) - * make samba.postinst ignore the absence of /var/log/{s,n}mb*; - makes for a clean upgrade path. - * Building with MSDFS support (closes: #116793) - - -- Steve Langasek <vorlon@debian.org> Tue, 5 Mar 2002 14:14:33 -0600 - -samba (2.2.3a-1) unstable; urgency=low - - * New upstream version (closes: #135001) - * Potato builds were failing because debian/rules was not creating - debian/winbind/etc/logrotate.d/. A user having problems creating - Potato packages brought this to my attention. dh_installlogrotate - takes care of creating the directory for us, that's why we didn't - notice. - * Removed code that converts /etc/samba/smbpasswd from an ancient - format to the new format of Samba 2.0.0 and later. - Closes: #134375 - samba: postinst failed due to missing - /usr/bin/convert_smbpasswd. - * Re-organized FHS migration code in samba.postinst. Make sure we - don't fail when we move files that don't exist. - Closes: #133813 - samba: Install failed. - * Adding docs. to the libpam-smbpass package. - * Remove man pages for findsmb because we are not providing this - script. - Closes: #134181 - findsmb referenced, but not included. - * Removed replace.patch because it is now present upstream. - * Added patch from Jerry Carter to fix a problem when saving - document preferences for printing from NT clients. - * The real winbindd daemon is a forked process so we can't use - --make-pidfile when calling start-stop-daemon. Fixed - /etc/init.d/winbind to work around the issue. Thanks to - Lin Li <linl@xandros.com> for the patience and for reporting - the problems. Hopefully I got it right this time. - - -- Eloy A. Paris <peloy@debian.org> Wed, 20 Feb 2002 18:39:03 -0500 - -samba (2.2.3-6) unstable; urgency=low - - * Make sure there are actual files in /var/state/samba before trying - to move them (Closes: #133534, #133510). - * Fix up the 2.2.3 makefile so that pam_smbpass builds correctly - again. - - -- Steve Langasek <vorlon@debian.org> Tue, 12 Feb 2002 09:19:29 -0600 - -samba (2.2.3-5) unstable; urgency=low - - * Whoops, missed a spot on the samba.postinst -- will fail badly if - /var/state/samba/ no longer exists. Better get this fix into the - next upload. ;) (Closes: #133088) - * Regenerate configure only if it is older than configure.in. - * Fix smbd handling of network neighborhood lists, which was missed - in the FHS conversion (Closes: #133091) - - -- Eloy A. Paris <peloy@debian.org> Sat, 9 Feb 2002 16:37:57 -0500 - -samba (2.2.3-4) unstable; urgency=low - - * FHS cleanup; files in /var are now properly sorted according to - their nature. (Closes: #102101) - * Remove patches to source/configure, since we now call autoconf to - regenerate this file cleanly. - * lintian fixes: - - Create winbind.conffiles and add /etc/logrotate.d/winbind and - /etc/init.d/winbind to it. - - Use a relative symlink for /usr/lib/cups/backend/smb. - - Removal of a .cvsignore file in the samba-doc package. - * winbind.init fixes: - - Corrected name of the pid file (Steve) - - Make start-stop-daemon create a pid file for winbindd since it - does not create one on his own. - * #DEBHELPER# is not needed in samba.postinst because we are adding - manually everything that debhelper adds automatically. In fact, - since we are calling update-rc.d without standard paramaters I - think we can't use #DEBHELPER#. - * Fix fatal syntax error in samba.prerm. - - -- Steve Langasek <vorlon@debian.org> Thu, 7 Feb 2002 13:12:08 -0500 - -samba (2.2.3-3) unstable; urgency=low - - * work on lintian-cleanness in the package (wrong permissions, - maintainer scripts in need of debhelpering) - * /lib/security/pam_smbpass.so is now being included in the - libpam-smbpass package only, and not in both the libpam-smbpass and - samba packages (which was the case prior to 2.2.3-3.) - * Instead of making our patch scripts executable in the rules file - we run them through /bin/sh. - * New 'winbind' package that has all the winbind stuff that was in the - samba package in 2.2.3-2 and before. - * Added replace.patch: patch from Jeremy Allison to fix problems when - replacing or overwriting files in a Samba share. Patch was sent to - the samba mailing list. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Feb 2002 21:12:48 -0500 - -samba (2.2.3-2) unstable; urgency=low - - * add support to debian/scripts/{patch-source,unpatch-source} for - automatic updating and cleaning of <version.h>. This was a request - from the Samba Team: they wanted us to clearly mark our packages - so it is always known a user is running Samba with (possibly) - Debian-specific patches. - * Change init.d killscript link to K19samba, so we stop before autofs - (closes: 117327) - * Make our patch scripts executable in the rules file -- dpkg won't do - this for us (closes: #132415). - - -- Steve Langasek <vorlon@debian.org> Mon, 4 Feb 2002 09:51:00 -0600 - -samba (2.2.3-1) unstable; urgency=low - - * New upstream release (closes: #131228). - * Restructured build system that provides DBS-like separation of - patches - * Fix typo in smbfs description (closes: #116209). - * Use killall -q in logrotate.d script, to avoid spurious cron - emails (closes: #130100). - - -- Steve Langasek <vorlon@debian.org> Sat, 2 Feb 2002 19:56:18 -0500 - -samba (2.2.2-12) unstable; urgency=high - - * (Steve) Patch for source/client/client.c. - Closes: #86438 smbclient: Transfering several GB causes the average - speed to be messed up. - * Uploading with urgency=high to expedite the move from unstable - to testing because of the security problem fixed in -11. - - -- Eloy A. Paris <peloy@debian.org> Fri, 25 Jan 2002 22:31:12 -0500 - -samba (2.2.2-11) unstable; urgency=low - - * Building with --with-libsmbclient. We have created two new - packages: libsmbclient and libsmbclient-dev. Hopefully this - will help some people that want to add the capability of - speaking SMB to their applications. - Closes: #117132 - libsmbclient support library? - * (Steve) Make swat do the right thing when reading (parsing) - the saved preferences in smb.conf. - Closes: #55617 swat mutilates the linpopup message command. - * Updated README.Debian. Updated descriptions in debian/control. - * Remembered to bump up version number in source/include/version.h - (need to automate this or else I'll keep forgetting.) - * (Steve) one liner for source/web/diagnose.c. - Closes: #106976 - smbd/nmbd not running message with swat/linuxconf. - * Added '|| true' to the post-rotate script so logrotate doesn't - fail if either nmbd or smbd is not running. - Closes: #127897 - /etc/logrotate.d/samba fails if there is no smbd process. - * Fixed incorrect file locations in swat's man page and added a - Debian-specific note to /usr/share/doc/swat/README. - Closes: #71586 swat: needs documentation fixes for debian. - * smbmount in the smbfs package does not have the setuid bit set. - Apparently, smbmount uses libsmb without checking the environment. - Thanks to Christian Jaeger <christian.jaeger@sl.ethz.ch> for - finding the local root exploit. - * Applied old patch from Jerry) Carter" <jerry@samba.org> to correct - the following two problems in Samba 2.2.2: - - %U and %G could not be used in services names - in smb.conf. - - %G would fail to be expanded in an "include = ..." - line. - - -- Eloy A. Paris <peloy@debian.org> Sat, 19 Jan 2002 21:35:26 -0500 - -samba (2.2.2-10) unstable; urgency=low - - * (Steve) Add missing manual pages. - Closes: Bug#128928: missing manpages in smbfs. - - -- Eloy A. Paris <peloy@debian.org> Sun, 13 Jan 2002 14:39:55 -0500 - -samba (2.2.2-9) unstable; urgency=low - - * (Steve) Fix broken URL's in HTML docs. - Closes: Bug#17741: bad links in html docs (at last!!!) - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 13:37:07 -0500 - -samba (2.2.2-8) unstable; urgency=low - - * Added "Replaces: samba (<= 2.2.2-5)" to the smbclient section in - debian/control so rpcclient.1, which was in samba-2.2.2-5, does not - cause problems now that it is part of smbclient (>= 2.2.2-6). Closes: - Closes: Bug#128684: error upgrading smbclient in sid. - - -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 11:42:40 -0500 - -samba (2.2.2-7) unstable; urgency=low - - * (Steve) Patch to make behavior honor what the docs. say about "hosts allow" - taking precedence over "hosts deny". - Closes: Bug#49249: swat: error with host deny ?! - - -- Eloy A. Paris <peloy@debian.org> Thu, 10 Jan 2002 12:36:58 -0500 - -samba (2.2.2-6) unstable; urgency=low - - * (Steve) Adds manpage for rpcclient to the proper file, - removes smbtorture from the distro because this tool isn't intended for - widespread consumption. - Closes: #63057 - no manual page for smbtorture. - * (Steve) Removed -gnu from the configure arguments (--build, --host) in - debian/rules so config.sub is able to properly create the host and target - tuples. - - -- Eloy A. Paris <peloy@debian.org> Wed, 9 Jan 2002 14:39:51 -0500 - -samba (2.2.2-5) unstable; urgency=low - - * Fixes from vorlon: - * Use /usr/bin/pager instead of more. - Closes: #125603: smbclient violates pager policy. - * Make /etc/logrotate.d/samba a conffile, send smbd and nmbd - a SIGHUP to have the log files reopened, fixes to - /etc/logrotate.d/samba. - Closes: #127897: log file rotation. - Closes: #118277: /etc/logrotate.d/samba not listed in conffiles. - * s/covert/convert/. - Closes: #121653 probable typo in install message. - - -- Eloy A. Paris <peloy@debian.org> Sun, 6 Jan 2002 03:14:58 -0500 - -samba (2.2.2-4) unstable; urgency=low - - * Applied patch from Steve to work around problem in glibc that affects the - HPPA architecure. The patch detects the error condition at configure time - and compiles without LFS support if necessary. - Closes: Bug#126763: samba completely broken on hppa. - * Including unicode_map.1251. - Closes: Bug#126719: samba-common: unicode_map.1251 missing. - * Updated smbd daemon version to match Debian package version. - Closes: Bug#127199: Package version and smbd daemon version don't match. - - -- Eloy A. Paris <peloy@debian.org> Mon, 31 Dec 2001 14:32:47 -0500 - -samba (2.2.2-3) unstable; urgency=low - - * Added some spaces in package description in debian/control. - Closes: #120730 - missing spaces in package description for nice - alignment. - * Spelling fixes. - Closes: #125328, #125329, #125330, #125367, #125365, #125403. - * Steve Langasek <vorlon@debian.org> is the co-maintainer of the Debian - Samba packages!!! Added him to the uploaders field in debian/control. - - -- Eloy A. Paris <peloy@debian.org> Tue, 18 Dec 2001 00:54:25 -0500 - -samba (2.2.2-2) unstable; urgency=low - - * Backed out changes to source/filename.c per Andrew Tridgell's request. - This changes were introduced in 2.2.1a-7 as an attempt to fix #47493. - Tridge found out that they break smbd. - * Changed version number in source/includes/version.h so it is clear that - this is a version of Samba packaged for Debian. This is another request from - Tridge and will help the Samba Team to get bogus bug reports. - * Added Samba-HOWTO-Collection.pdf and other README files to the - /usr/share/doc/<package>/ directories. - * Installing libnss_winbind.so and pam_winbind.so. - Closes: #116790: nss and pam modules for winbind missing. - * Removed user-emacs-settings from changelog. - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Oct 2001 19:16:26 -0500 - -samba (2.2.2-1) unstable; urgency=low - - * New upstream version. - * Temporary fix for #113763 (Steve Langasek) - * Quick hack to avoid smbmount reveal password length. Please note - that even with this hack there is a small window when password is - completely visible with 'ps aux'. There are other methods that should - be used to automate mounting of SMB shares. - Closes: #112195: smbmount-2.2.x reveals password length. - * Applied patch from Steve Langasek <vorlon@debian.org> to prevent - forcing use of setresuid() in Sparc. - Closes: #112779: samba build forces use of setresuid, which causes - smbd to fail on Sparc. - - -- Eloy A. Paris <peloy@debian.org> Mon, 15 Oct 2001 10:26:10 -0400 - -samba (2.2.1a-9) unstable; urgency=low - - * Replaced $(LD) with $(CC) all the way through source/Makefile. - Closes: #111036: ld shouldn't be used to link shlibs. - * s/\/bin\/mail/\/usr\/bin\/mail/ in smb.conf's man page (HTML and - sgml as well.) - Closes: #110963: smb.conf: mail should be /usr/bin/mail. - * Documented better smbclient's -W behavior. Patch from Steve - Langasek. - Closes: #53672: smbclient: -W flag is interpreted as domain, not - workgroup. - - -- Eloy A. Paris <peloy@debian.org> Tue, 4 Sep 2001 23:10:41 -0400 - -samba (2.2.1a-8) unstable; urgency=low - - * Set some reasonable default perms for the samba logdir (again, - thanks to vorlon :-) - Closes: #72529: insecure permissions on log files. - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 15:40:47 -0400 - -samba (2.2.1a-7) unstable; urgency=low - - * Another attempt at fixing #47493. Patch from Steve Langasek - <vorlon@netexpress.net>. Let's keep our fingers crossed Steve! - - -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 13:37:06 -0400 - -samba (2.2.1a-6) unstable; urgency=low - - * Backed out fix to #47493 introduced in 2.2.1a-4 as it is causing - smbd to die with signal 11 under some unidentified situations. - Closes: #109774: Latest debian version breaks printer driver download. - Closes: #109946: not all files appear in samba-exported directories. - * Another patch from Steve Langasek. This one adds quotes around - printer names for print systems it's reasonable for Debian to - support. Together with the patch in #29957 (see changelog for - 2.2.1a-4), this should take care of the problems with multi-word - printer names in Samba. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 21:12:27 -0400 - -samba (2.2.1a-5) unstable; urgency=low - - * Important changes that affect how Samba is built on Debian - machines are implemented in this release. All of this changes - were suggested by the energetic Steve Langasek <vorlon@debian.org>, - and his arguments were so sound and reasonable that I decided - to implement them. Here's Steve's original changelog: - - * Fix up the build system to avoid needing to run configure - as root to answer questions we already know the answers to. - * In the process, make surprising progress towards being able to - cross-compile the samba packages. - - -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 01:08:06 -0400 - -samba (2.2.1a-4) unstable; urgency=low - - * Fixed typo in smbmount's mount page. - Closes: #109317: smbfs: mistype in smbmount manpage. - * Included symlink to smbspool to better support CUPS printing. - Closes: #109509: include symlink for cups samba support. - * Applied patch from Steve Langasek <vorlon@netexpress.net> to - fix bug #29957. - Closes: #29957: samba strips trailing " from strings in smb.conf. - * First attempt at fixing #47493. Another patch from Steve "I want - a bug-free Samba" Langasek. - Closes: #47493: Samba doesn't handle ':' in dir names right. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Aug 2001 23:26:38 -0400 - -samba (2.2.1a-3) unstable; urgency=low - - * Steve Langasek <vorlon@netexpress.net> has been hard at work in - the last few days looking at the long list of open bugs filed - against the Samba packages. I don't know how to thank him. It's been - a pleasure working with Steve, and all the fixes, patches, etc. in - this release come from him. The bug list is greatly reduced thanks - to Steve's efforts. - * Steve's additions/modifications/patches/etc. are: - - New package that (libpam-smbpass) provides pam_smbpass. Before, this - was provided in another package but now the sources are part of - the Samba sources so we can start providing it from here. - Closes: #107043 - pam_smbpass now present in Samba source, - should be built from there - - Patch to source/smbd/service.c that allows admins to call - /bin/umount from the root postexec of a Samba share. - Closes: #40561 - samba pre/postexec commands do not work. - - Clear TMPDIR before starting smbd in /etc/init.d/samba. - Closes: #51295 - Problems with Samba and TMPDIR. - - Correction to documentation of "guest only". - Closes #38282 - "guest only" share still requires a password. - * Applied patch from Santiago Vila <sanvila@unex.es> to convert - /usr/sbin/mksmbpasswd from a shell script into a real awk script. - Sorry it took so long, Santiago; I hadn't realized you even - provided a patch :-) - Closes: #77891 - mksmbpasswd could be a real awk script. - * Updated description of the smbfs and smbclient packages. Also have - each package recommend the other. - Closes: #108650: Should suggest or recommend smbfs. - - -- Eloy A. Paris <peloy@debian.org> Mon, 13 Aug 2001 22:21:55 -0400 - -samba (2.2.1a-2) unstable; urgency=low - - * Build-depends: depend on debhelper (>=2.0.103). - Closes: #105795: Build-Depends are wrong. - * Run samba's preinst and postinst scripts without -e so failed commands - do not abort installation. - Closes: #106384: postinstall crashes abnormally. (And really closes - #104471.) - - -- Eloy A. Paris <peloy@debian.org> Thu, 26 Jul 2001 00:30:37 -0400 - -samba (2.2.1a-1) unstable; urgency=low - - * New upstream version. - * Make sure samba's postinst script exits with a zero status. - Closes: #104471: Samba postinst problem. - - -- Eloy A. Paris <peloy@debian.org> Thu, 12 Jul 2001 21:55:21 -0400 - -samba (2.2.1-1) unstable; urgency=low - - * New upstream version. - Closes: #103339: config.guess and config.sub update required. - Closes: #98518: Samba 2.2 can't act as PDC for NT4/W2K due to - incompatibility with PAM. - Closes: #97447: nmbd crashes due to bugs in DAVE 2.5.2. - Closes: #95777: Samba 2.2 is unable to join or authenticate against - Samba 2.2 PDC domain. - Closes: #68842: samba should use PAM for password changing (I - haven't personally tried this one, but it's been - advertised this works.) - Closes: #102506: PAM account checking fails. - Closes: #102518: Complains about unknown paramter "obey pam - restrictions" - Closes: #94774: Build failure on PARISC machines. - * Moved away from /etc/cron.weekly/samba for log file rotation. - Now using logrotate. - Closes: #95548: typo in /etc/cron.weekly/samba. - Closes: #74951: nmbd does not rename its log file. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Wed, 11 Jul 2001 00:44:14 -0400 - -samba (2.2.0.final.a-1) unstable; urgency=high - - * New upstream version (contains security fix from DSA-065-1.) - Closes: #97241: samba 2.2.0 fails to process hostnames in - "hosts allow" config line. - * Removed Debian-specific addtosmbpass.8 man page since this script - is not longer provided upstream. Users should use the smbpasswd - program instead. - Closes: #98365: addtosmbpass is missing from 2.2.0.final-2. - * Updated sample /etc/samba/smb.conf to reflect the recent changes - affecting handling of PAM authentication. Also updated - /etc/pam.d/samba. - - -- Eloy A. Paris <peloy@debian.org> Sun, 24 Jun 2001 11:11:59 -0400 - -samba (2.2.0.final-2) unstable; urgency=low - - * Added libcupsys2-dev to Build-Depends. - * Samba depends now (again) on netbase so update-inetd is always - available for the Samba maintainer scripts. - Closes: #86063: Fails to uninstall if inetd is not installed. - * Updated source/config.{sub,guess} so ARM built doesn't fail. - Closes: #94480: config.sub out of date; can't build on arm. - Closes: #85801: config.sub/guess out of date. - * Not using brace expansion, i.e. {foo,bar} in any of the maintainers - scripts nor in debian/rules. - Closes: #88007: samba postrm has is not POSIX sh compliant. - - -- Eloy A. Paris <peloy@debian.org> Sat, 21 Apr 2001 17:27:18 -0400 - -samba (2.2.0.final-1) unstable; urgency=low - - * New upstream release. Lots of new things. See WHATSNEW.txt. - * Goofy version number because of my stupidity when assigning version - numbers to the CVS packages I have been uploading to experimental. - Will be fixed when 2.2.1 is released. I've no doubts a 2.2.1 release - will follow soon. - - -- Eloy A. Paris <peloy@debian.org> Tue, 17 Apr 2001 22:58:14 -0400 - -samba (2.2.0.cvs20010416-1) experimental; urgency=low - - * CVS update. - - -- Eloy A. Paris <peloy@debian.org> Mon, 16 Apr 2001 21:25:15 -0400 - -samba (2.2.0.cvs20010410-1) experimental; urgency=low - - * CVS update. - * Added libreadline4-dev to Build-Depends. - - -- Eloy A. Paris <peloy@debian.org> Tue, 10 Apr 2001 16:53:45 -0400 - -samba (2.2.0.cvs20010407-1) experimental; urgency=low - - * CVS update. Includes what is in 2.2.0alpha3. - - -- Eloy A. Paris <peloy@debian.org> Sat, 7 Apr 2001 16:00:33 -0400 - -samba (2.2.0.cvs20010316-1) experimental; urgency=low - - * Started working on Samba 2.2.0. Using the SAMBA_2_2_0 branch - from Samba CVS. - * Not compiling rpctorture as it has compile errors. Change in - debian/rules. - * Removed Linux kernel 2.0.x and smbfs compatibility baggage. Now - the smbfs does not support 2.0.x kernels; a kernel > 2.2.x is - needed to use smbfs. Updated debian/control, debian/rules and - README.Debian to reflect this change. - * Added to swat a versioned dependency on samba (so a user is forced to - install a new version of swat each time a new version of samba is - installed.) - - -- Eloy A. Paris <peloy@debian.org> Sun, 18 Mar 2001 14:21:14 -0500 - -samba (2.0.7-5) unstable; urgency=medium - - * Transition from suidmanager to dpkg-statoverride. - - -- Eloy A. Paris <peloy@debian.org> Thu, 18 Jan 2001 23:51:56 -0500 - -samba (2.0.7-4) unstable; urgency=medium - - * Applied Urban Widmark <urban@teststation.com> fixes to smbmount. Urban - is the maintainer of the smbfs in the kernel and of the userland - utilities. - * Links to HTML documents are correct now. - Closes: #69439: swat: Broken help file symlinks - Closes: #72615: samba-doc directory changed: removed htmldocs from path - Closes: #75847: swat: Wrong symlink - Closes: #66857: Wrong links to html documents. - Closes: #77912: misplaced documentation symlinks for swat - * Building Samba with CUPS support. For this I reverted the change to - source/configure.in that I did in 2.0.7-3 and re-ran autoconf. - Closes: #59038: samba: not compiled with cups support. - * Fix against previous known/unknown user time difference patch to swat - (make username / password lookups take the same time.) Remove CGI - logging code in Swat. - Closes: #76341 - Security holes in swat - * Updated Build-depends. - * Updated debian/copyright to refer to the correct location of the GPL. - * debian/rules: changed DESTDIR to `pwd`/debian/samba (was - `pwd`/debian/tmp.) - * debian/rules: added '--sourcedir=debian/samba' to dh_movefiles (for some - strange reason dh_installdirs is not creating debian/tmp/ so I needed - to tweak everything to install stuff in debian/samba rather than in - debian/tmp.) - * debian/control: changed section of samba-docs to 'doc' (was 'docs') - * Using relative symlinks in /usr/share/samba/swat/ (changed debian/rules - and source/scripts/installswat.sh.) - * Fixed (by tweaking debian/rules) - /usr/bin/{smbmnt,smbumount-2.*,smbmount-2.*} to be suid. - * Added "Provides: samba-client" to smbclient's section in control. - Closes: #71143: smbclient: Smbclient should provide samba-client. - * Fix for desired_access being zero in map_share_mode() (patch to - source/smbd/nttrans.c.) Thanks to Gary Wilson - <wilsong@sergievsky.cpmc.columbia.edu> for bringing this patch to my - attention. - * Hacked source/lib/util_sec.c so smbd works fine in both 2.0.x and - 2.2.x kernels even when the build is done in a system running - a 2.2.x kernel. - Closes: #78858: samba-common: samba2.0.7 needs kernel 2.2.x but - doesnt depend on it. - Closes: #72758: README.Debian should comment on 2.0.x kernels. - Closes: #56935: Samba 2.0.6 and Kernel 2.0.x. - Closes: #58126: Samba 2.0.6 and Kernel 2.0.x -- more info. - Closes: #60580: samba: failed to set gid. - Closes: #64280: Samba panics, can't set gid. - Closes: #66816: Must deal with brokenness under 2.0.x. - Closes: #67682: potatoe samba 2.0.7-3 out of order, 2.0.5a-1 OK. - Closes: #69735: PANIC: failed to set gid - Closes: #66122: "smbclient -L localhost -U%" returns with "tree - connect failed: code 0". - Closes: #57637: Samba says tree connect error. - Closes: #58015: potato samba wins support is broken. - * Fixed comments in sample smb.conf to point to the correct location. - Closes: #69578: comments in smb.conf points to wrong path. - * Move codepages from /etc/samba/codepages/ to - /usr/share/samba/codepages/. - Closes: #63813: samba; codepages should go in /usr/lib. - * Moved /var/samba/ to /var/state/samba/. - Closes: #49011: samba package not FHS compliant. - * Hacked source/configure.in (and re-ran autoconf) so yp_get_default_domain() - is found. - Closes: #44558: netgroup support missing in samba 2.0.5a-1. - * /etc/init.d/samba was calling start-stop-daemon with both --pidfile and - --exec. Got rid of --exec so --pidfile works. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Jan 2001 00:15:57 -0500 - -samba (2.0.7-3) frozen unstable; urgency=high - - * Release manager: this closes a RC bug. - * Commented out the section in source/configure.in that auto-detects - CUPS support and then ran autoconf to generate a new configure - script. This was done to prevent machines that have libcupsys-dev - installed from detecting CUPS support and adding an unwanted - dependency on libcupsys. This way the whole printing system - won't break on upgrades. CUPS support should be added after - Potato is released. - Closes: #65185: samba-common: Upgrading removes printing system. - Closes: #64496: smbfs: smbfs on powerpc has a dependency on cupsys. - * Updated README.debian. - Closes: #64594: Old README.Debian in /usr/share/doc/samba. - - -- Eloy A. Paris <peloy@debian.org> Tue, 20 Jun 2000 19:16:04 -0400 - -samba (2.0.7-2) frozen unstable; urgency=high - - * Release manager: this closes RC bug #63839 that prevents Samba - to be built from source. - * Fixed a stupid typo in debian/rules that was preventing Samba - to be built from source. - Closes: #63839: samba_2.0.7-1(frozen): build error (SAMBABOOK dir) - * I forgot to mention that O'Reilly's book "Using Samba" was donated - to the Open Source community. The book was included in Samba 2.0.7 - in HTML format and is part of the Debian Samba package since - Samba 2.0.7-1. - * In Samba 2.0.7-1, the "Using Samba" book and a number of HTML help - files were supposed to be provided in both the swat and the samba-doc - packages. This duplication was a waste of space. Starting with - Samba 2.0.7-2, swat recommends samba-doc and the book and the HTML - files are included only in samba-doc, and are accessed via symlinks - from within swat. - Closes: #58810: superfluous files in swat? - * Added a 'echo "."' to /etc/init.d/samba in the reload) section. - Closes: #63394: "echo ." missing in reload section of init.d script - * Fixed typo in docs/htmldocs/using_samba/ch06_05.html. - Closes: #64344: typo "encrypted passwords" - * Cleaned up samba's postrm script so important common files aren't - deleted when samba is purged. Created a samba-common.postrm script. - Closes: #62675: purging samba removes /etc/samba/smb.conf. - Closes: #63386: samba --purge removes /etc/samba dir even though - smbclient/smbfs/samba-common packages are still installed - - -- Eloy A. Paris <peloy@debian.org> Wed, 3 May 2000 02:42:07 -0400 - -samba (2.0.7-1) frozen unstable; urgency=low - - * New upstream version. Dear Release Manager: please allow this - package to go to frozen as it contains fixes to a _lot_ of problems. - You can take a look at all the problems fixed by this release in - the official upstream announcement at - http://us1.samba.org/samba/whatsnew/samba-2.0.7.html. - * Added --with-utmp to add utmp support to smbd (this is new in Samba - 2.0.7) - * Closes: #62148 - samba not rotating filled logs. - * Closes: #56711: Samba doesn't manage well long share name (please note - that it's possible to connect to shares with names longer than - 14 characters but the share will be listed with a name truncated to - 13 characters.) - * Closes: #51752 - NT DOMAIN - NET USE * /HOME not mapping (error 67). - Closes: #50907 - logon path not working. - This is not a bug, it's just Samba doing the same thing an NT server - does. See WHATSNEW.txt and smb.conf's man page for details. - * Closes: #48497 - error executing smbsh in debian-potato. (smbwrapper - is not supported anymore.) - * Closes: #58994 swat: typo in swat description. - * Closes: #45931 - Samba dies with SIGILL on startup. (Hardware - problems, person that reported the bug never came back.) - Closes: #54398 - smbadduser fails, looks for ypcat. - * Fixed swat's man page to include Debian specific installation - instructions. There's not necessary to edit /etc/services or - /etc/inetd.conf. - (Closes: #58616 - incomplete install config && incorrect installation - instructions.) - * s/SBINDIR/\"/usr/sbin\"/g in source/web/startstop.c to prevent swat - to look for smbd and nmbd in the wrong place when requested to start or - stop smbd or nmbd. - (Closes: #55028 - swat can't start samba servers.) - * Closes: #37274: smbclient does not honour pot. (Tested and seems to be - working now.) - * Not confirmed, but should fix #56699, #62185, #56247, #52218, #43492, - #50479, #39818, #54383, #59411. - (please re-open any of this if the problem still exists - I was unable - to confirm any of this because I could never reproduce them.) - Closes: #56699 - Samba's nmbd causes random kernel oops several - times in a row. - Closes: #62185 - nmbd's forking until no more file descriptors are - available. - Closes: #56247 - session setup failed: ERRSRV - ERRbadpw. - Closes: #52218 - Either wins proxy does not work, or I don't understand - it. - Closes: #43492 - intermittent problem changing password. - Closes: #50479 - Can't access windows 2000 shares with samba. - Closes: #39818 - samba-common: Upgrading Samba from the Slink version. - Closes: #54383 - samba-common: Missing /etc/smb.conf. - Closes: #59411 - smbclient: cannot browse Win2k shares. - - -- Eloy A. Paris <peloy@debian.org> Thu, 27 Apr 2000 16:07:45 -0400 - -samba (2.0.6-5) frozen unstable; urgency=low - - * Oppsss! samba-common doesn't depend on libcupsys1 so the binaries - in this package are broken unless libcupsys1 is installed. - samba-common has a "grave" bug because of this. Instead of adding - libcupsys1 to the Depends: list of each package in debian/control - I investigated why dh_shlibs was not picking the dependency - automatically. It turns out that it's probably a bug in libcupsys1 - because the format of its shlibs file is not correct. I fixed that - file (/var/lib/dpkg/info/libcupsys1.shlibs) and now dependencies are - picked correctly. I'll talk to the libcupsys1 maintainer. - - I think the addition of CUPS support to Samba is a big change that - should not go into Frozen. So, I decided to back up the addition - of CUPS support I did in 2.0.6-4 to minimize problems. I'll add - CUPS support again when I start working on Samba for Woody. - (Closes: #59337 - samba-common has a missing dependency) - - -- Eloy A. Paris <peloy@debian.org> Wed, 1 Mar 2000 08:40:02 -0500 - -samba (2.0.6-4) frozen unstable; urgency=low - - * It seems that sometimes nmbd or smbd are not killed when upgrading. - I think it is because in samba's prerm script I was calling - start-stop-daemon with the --pidfile switch and in old versions of - Samba the nmbd and smbd daemons did not store their PIDs in a file in - /var/samba/. I changed debian/samba.prerm so the existence of the - PID files is checked before calling "start-stop-daemon --pidfile ..." - If the PID files do not exist then start-stop-daemon is called - without the --pidfile parameter. - (Closes: #58058 - upgrade from slink went badly) - * Fixed typo in description of swat package in debian/control. - * Installed libcupsys1-dev so the configure script picks up CUPS - and Samba is compiled with CUPS support. Also added libcupsys1 to - the Depends: list of package samba in debian/control. - (Closes: #59038 - samba not compiled with cups support) - * Added a small paragraph to debian/README.debian warning about possible - problems with the WINS code in Samba 2.0.6. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Feb 2000 14:00:42 -0500 - -samba (2.0.6-3) frozen unstable; urgency=low - - * Applied patch posted by Jeremy Allison to the samba mailing list - that should take care of the internal errors reported in bug #52698 - (release-critical). Wichert: please test as I never could reproduce - it here. - (Closes: #52698 - samba gets interbal errors) - * Moved samba-docs to the 'docs' section. - (Closes: #51077 - samba-doc: wrong section) - * Added reload capability to /etc/init.d/samba (only for smbd because - nmbd does not support reloading after receiving a signal). - (Closes: #50954 - patch to add reload support to /etc/init.d/samba) - * Corrected "passwd chat" parameter in sample /etc/samba/smb.conf so - Unix password syncronization works with the passwd program currently - in Potato. Thanks to Augustin Luton <aluton@hybrigenics.fr> for - the correct chat script. - * Stole source/lib/util_sec.c from the CVS tree of what will become - Samba 2.0.7 or whatever so we can use the same binaries under - both 2.0.x and 2.2.x kernels. - (Closes: #51331 - PANIC: failed to set gid) - * smbadduser is now provided as an example and it's customized for Debian. - I am not providing this script in /usr/sbin/ because then I would need - a dependency on csh, something that I don't want to do. - (Closes: #51697, #54052) - * Fixed the short description of the smbfs package in debian/control. - (Closes: 53534 - one-line description out of date). - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Nov 1999 16:32:12 -0500 - -samba (2.0.6-2) unstable; urgency=low - - * samba-common now depends on libpam-modules (not on libpam-pwdb, which - I have been told is obsolete). I modified /etc/pam.d/samba accordingly - to reflect the change. - (Closes: Bug#50722: pam pwdb dependence?). - * The old /etc/pam.d/samba file which had references to pam_pwdb caused - smbd to die with a signal 11. The new /etc/pam.d/samba file fixes - this problem. - (Closes: #50876, #50838, #50698) - * Compiled with syslog support (use at your own risk: syslog support - is still experimental in Samba). I added the parameters "syslog = 0" - and "syslog only = no" to the sample smb.conf to avoid pestering - users that do not want Samba to log through syslog. - (Closes: Bug#50703 - syslog only option doesn't work) - * Removed the stupid code in the smbmount wrapper script that tries - to load the smbfs module if smbfs is not listed in /proc/filesystems. - (Closes: Bug#50759 - Non-root can't run smbmount if SMBFS is compiled - as a module in the kernel) - * Added /bin/mount.smb as a symlink pointing to /usr/bin/smbmount so - 'mount -t smb ...' works just as 'mount -t smbfs ...'. - (Closes: Bug#50763 - 'mount -t smb' doesn't work) - - -- Eloy A. Paris <peloy@debian.org> Sat, 20 Nov 1999 18:53:35 -0500 - -samba (2.0.6-1) unstable; urgency=low - - * Samba 2.0.6 has been released. This is the first try of the Debian - Samba packages. I know for sure that smbd won't work properly on - 2.0.x kernels because the patch that Wichert sent me does not apply - to the new source/lib/util_sec.c in Samba 2.0.6. That file was - completely re-written by Tridge. - * Updated README.Debian. - * A new client utility called smbspool appeared in Samba 2.0.6. I added - this utility to the smbclient package, although I haven't tried it yet. - * Added the symlink /sbin/mount.smbfs that points to /usr/bin/smbmount. - This is to be able to type "mouont -t smbfs ...". This symlink goes - in the smbfs package, of course. - * This new release should close the following bugs (some of these - are fixed for sure in this new upstream release, some others I could - not reproduce but I believe they are fixed if they were real bugs. - As always, please feel free to re-open the bugs if the problem is not - solved). - Closes: Bug#33240: icmp mask needs a bug workaround. - Closes: Bug#37692: samba: Has problems detecting interfaces. - Closes: Bug#38988: samba: Truly bizzare behavour from nmbd. - Closes: Bug#46432: samba-2.0.5a-2: nmbd does not appear to broadcast - properly. - Closes: Bug#44131: smbfs: no longer possible to set file and - directory-modes. - Closes: Bug#46992: smbmount-2.2.x manpage wrong. - Closes: Bug#42335: smbfs: missing options from the new 2.2.x commandline. - Closes: Bug#46605: smbmnt segfaults. - Closes: Bug#48186: smbmount. - Closes: Bug#38040: smbfs: Please add /sbin/mount.smb [included]. - Closes: Bug#47332: smbmount: could -f and -P be added back? - * Samba has been compiled with PAM support (closes: Bug#39512 - samba PAM - module). To succesfully add PAM support, I created /etc/pam.d/samba and - added this file as a conffile for the samba-common package. I also made - samba-common depend on libpam-pwdb. - * Added simple man pages for the wrapper scripts smbmount and smbmount. - (Closes: Bug#44705 - Missing smbmount man page) - * Installed libreadlineg2-dev in my system so smbclient now has a - "history" command and libreadline support :-) - * This time I did add a check to the smbmount wrapper script to see if - the kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. I mentioned in the changelog - for samba-2.0.5a-3 that I did this but I forgot at the end. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Nov 1999 12:08:15 -0500 - -samba (2.0.5a-5) unstable; urgency=low - - * I am sorry to report that the smbwrapper package is gone for the - moment. The reason for this is twofold: first of all, smbwrapper - is completely broken in Samba-2.0.5a (it compiles but it doesn't - run) and in the upcoming Samba-2.0.6 it doesn't even compile. Second, - when I asked Andrew Tridgell (father of Samba) about the state of - smbwrapper he told me that Ulrich Drepper (head of the glibc project) - broke on purpose the glibc stuff in which smbwrapper is based. - Consequently, Tridge recommended me to compile Samba without - support for smbwrapper. When, I have no idea. Sorry folks. Here is - the original message I received from Andrew: - - > 1) 2.0.5a's smbwrapper doesn't work under glibc2.1, and pre-2.0.6's - > smbwrapper doesn't even compile under glibc2.1. - - yep, Ulrich deliberately broke it. It won't get fixed till glibc - allows the sorts of games it plays to work again. I suggest you turn - it off in your build scripts until that gets sorted out. - - * Swat's file are now in /usr/share/samba/ instead of - /usr/lib/samba/ (bug #49011). - * Man pages now in /usr/share/man/ instead of /usr/man/ (bug #49011). - - -- Eloy A. Paris <peloy@debian.org> Tue, 2 Nov 1999 12:59:13 -0500 - -samba (2.0.5a-4) unstable; urgency=low - - * Applied patch from our fearless leader (Wichert) to fix the darn bug - that prevents Samba to work on 2.0.x kernels if it was compiled - in a system running a 2.2.x kernel. This closes #40645 (build uses - setresuid which doesn't work under 2.0.34 (does apparently under - 2.2.x) ). - * Fixed the entry that swat's postinst script adds to /etc/inetd.conf - so it is '#<off># swat\t\tstream\ttcp\tnowait.400 ...' instead of - '#<off>#swat\t\tstream\ttcp\tnowait.400 ...'. The old way caused - 'update-inetd --enable swat' to leave the entry for swat disabled. - Thanks to Dave Burchell <burchell@inetnebr.com> for finding out - this problem. This closes #48762 (swat uses non-standard syntax to - comment out inetd.conf entry). - * /usr/sbin/swat does not think anymore that the smbd daemon lives - in /usr/local/samba/bin/. To fix this I am running now source/configure - with "--prefix=/usr --exec-prefix=/usr". This closes #47716 (samba - 'swat' fails: incorrect hardwired path in the binary). - - -- Eloy A. Paris <peloy@debian.org> Sun, 31 Oct 1999 03:42:38 -0500 - -samba (2.0.5a-3) unstable; urgency=low - - * I am pretty darn busy with my MBA, I apologize for the long time it's - taking to squash bugs in the Samba packages. - * Built with debhelper v2 for FHS compliancy. Changed a couple of - things in debian/rules to accomodate for the new place for the docs. - I also had to change debian/{samba.postinst,samba.prerm,swat.postinst} - to make sure that the symlink from /usr/doc/xxx exists and points to - /usr/share/doc/xxx (the reason for this is that I am not letting - debhelper to create these scripts for me automatically). - * Built with latest libc6. - * smbfs: finally, the nasty bug that causes smbmount to die after - a while is gone thanks to Ben Tilly <Ben_Tilly@trepp.com>. - The problem was just a typo in source/client/smbmount.c. - This closes grave bug #42764 (smbmount dies) and #43341 - (smbfs-2.2.x won't function after a while). - * Fixed the smbmount wrapper script to eliminate a bashism (closes - #45202 - "wrapper scripts use $* instead of "$@") and to recognize - 2.3.x and 2.4.x kernels (closes #47688 - "smbfs: does not recognize - kernel 2.3.x"). - * Added a check to the smbmount wrapper script to see if the - kernel has support for smbfs, as suggested by Jeroen Schaap - <J.Schaap@physiology.medfac.leidenuniv.nl>. - * swat's man page is now part of the swat package, not of the samba - package. This closes #44808 (Samba has a man page for swat, but - the binary is not included). - * The interface program smbrun is not longer needed by smbd because - of the availability of execl() under Linux. Because of this, the - smbrun is not even being compiled. Since there is no need for smbrun - now, the smbrun man page was taken out of the samba package. This - closes #45266 (/usr/bin/smbrun missing). - * smbpasswd is now part of the samba-common package, and not part of - the samba package. This is to let administrators that do not want - to install a full Samba server administer passwords in remote - machines. This closes bug #42624 (smbpasswd should be included in - smbclient). This bug report also suggests that swat becomes part of - the samba package, that smbfs becomes part of the smbclient package, - and that the binary smbpasswd becomes part of the smbclient package. - I moved smbpasswd to the samba-common package but I am reluctant to - do the other things the bug report suggests. - * In order to keep dpkg happy when moving smbpasswd from the samba - package to samba-common, I had to add a "Replaces: samba (<= 2.0.5a-2)" - in the control section of the samba-common package and a - "Replaces: samba-common (<= 2.0.5a-2)" in the control section of the - samba package (in debian.control). - * Samba is now being compiled with the "--with-netatalk" option. This - closes #47480 (Could samba be compiled with the --with-netatalk option). - * All packages that depend on samba-common have a versioned dependency - now. This was accomplished by adding "(= ${Source-Version})" to the - relevant sections of debian/control. Thanks t Antti-Juhani Kaijanaho - <gaia@iki.fi> for the hint. This closes #42985 (samba should probably - have a versioned depends on samba-common). - * Made sure the file docs/textdocs/DIAGNOSIS.txt gets installed in all - the Samba packages. This closes bug #42049 (no DIAGNOSTICS.txt file). - * Added the smbadduser helper script to the samba package. This closes - #44480 (Samba doesn't come with the smbadduser program). - * Applied patch from szasz@triton.sch.bme.hu that prevents smbmount - to leave an entry in /etc/mtab for a share that could not be mounted - because of invalid user of password. The patch also allows smbumount - to unmount the share in the event that something goes wrong with the - smbmount process. This closes bug #48613 (Mount/umount problems + - patch) as well as #44130 (failed mount is still mounted). - * smbmount-2.2.x is now setuid root. This is needed for the patch - applied above to be effective. If smbmount-2.2.x is not setuid root - then an entry will be left in /etc/mtab even when the mount - fails. I had to add "usr/bin/smbmount-2.2.x" to debian/smbfs.suid - for this to work. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Oct 1999 10:36:13 -0400 - -samba (2.0.5a-2) unstable; urgency=low - - * This version is basically the same as 2.0.5a-1 but it was compiled - on a Potato system with glibc2.1. See below the change log for 2.0.5a-1 - for more information. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:25:29 -0400 - -samba (2.0.5a-1) stable; urgency=high - - * I'm back from the Honey Moon. We are pretty busy because we are moving - to Pittsburgh (from Caracas, Venezuela) in aprox. 24 hours and we still - have plenty of things to pack and to do. Samba 2.0.5 was released - while I was in the Honey Moon and it is just now (almost 3 AM) when - I have time to package it. - * Because of the security problems fixed in 2.0.5, this upload goes - to both stable and unstable (the Security Team asked for this). - * This release (2.0.5a-1) was compiled on a Slink system. 2.0.5a-2 will - be compiled on a Potato system. - * Added a "Replaces: samba (<= 1.9.18p10-7)" to the samba-common - section in debian/control (as suggested by Steve Haslam - <araqnid@debian.org>) to fix the problems that appear when upgrading - from the Samba package in Slink. Please test this as I am completely - unable to do so. This should fix bug #39818 (Upgrading Samba from the - Slink version). - * Removed the hacks to the autoconf stuff that I added to 2.0.4b-2 in - order to have defined several socket options when compiling with - Linux 2.2.x kernel headers - the fix is now upstream. - * Finally!!! smbmount was re-written (thanks Tridge :-) to use a command - line syntax similar to the one used by the old smbmount (for 2.0.x - kernels). This means that the wrapper script is no longer necessary - so I removed it. In its place there is a simple wrapper script that - calls smbmount-2.0.x or smbmount-2.2.x depending on the kernel that is - running. - * Because of the wedding, the Honey Moon, and our move to Pittsburgh, - I can't work on fixing other bugs in this release. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:18:51 -0400 - -samba (2.0.4b-3) unstable; urgency=low - - * Stupid mistake: I forgot to add /usr/bin/smbumount to debian/smbfs.files - and because of this /usr/bin/smbumount was part of the samba package - instead of part of the smbfs package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Jul 1999 01:51:24 -0400 - -samba (2.0.4b-2) unstable; urgency=low - - * Dark (and archive maintainers): please remove from Potato the smbfsx - binary package and also the old source package for smbfs. smbfs and - smbfsx have been merged starting with this version. - * Merged the old smbfs package with Samba. Now there is only one package - for the smbfs utilities and is called "smbfs". The package smbfsx - does not exist any more and this new smbfs package must be used - for both 2.0.x and > 2.1.x kernels. - * A wrapper script was added to handle the syntax change in smbmount - in the new smbfs utilities (required for kernels > 2.1.70). The - home page for this script is http://www.wittsend.com/mhw/smbmount.html. - Please _note_ that this will change (for good) in Samba 2.0.5 :-) - * Added debian/smbumount.sh. It's another wrapper that calls smbumount-2.2.x - or smbumount-2.0.x depending on the kernel currently running. - * Not using -t for savelog in cron.weekly script. - * Recompiled without libreadlineg-dev (Samba does not seem to be using - it so unnecessary dependencies are produced). - * glibc2.1 build. - * Removed smbpasswd.8 man page from the debian/ directory because it is - now being provided upstream. - * Got rid of the ugly hack I put in source/lib/util_sock.c to have - IPTOS_LOWDELAY and IPTOS_THROUGHPUT defined. Now I patched the - autoconf stuff to #include <netinet/ip.h>. I've sent the patch to - Jeremy Allison so we have this upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 28 Jun 1999 17:47:19 -0400 - -samba (2.0.4b-1) unstable; urgency=low - - * New upstream release. This release fixes the following Debian bugs: - #33838 (Amanda/ Samba 2.0.2 and backing up large filesystems) and - #33867 (Amanda 2.4.1 and Samba 2.0.2 and large filesystems). Jeremy - Allison released Samba 2.0.4 and found out that there were a couple - of minor bugs so he released 2.0.4a. Then he found out about more - serious bugs and released 2.0.4b. I have built this package several - times between yesterday and today because of this. Now I am releasing - the Debian packages for Samba with what I believe will be the latest - release the Samba Team will make at least in the next 4 days (Jeremy - is taking a short vacation). - * Still compiling against glibc2.0 (sorry about that :-) - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. It looks - now in /usr/lib/samba/ for this file. This fixes #32971, #32989, - #33278, #34911 and #36317. - * Made smbfsx depend on samba-common because smbfsx uses /etc/samba/smb.conf - and /etc/samba/codepages/. This fixes #33128 (smbmount complains about - missing /etc/smb.conf). - * Package swat does not depend on httpd anymore (there's no need to). - This fixes #35795 (swat requires httpd). - * Renamed smbmount-2.1.x and smbumount-2.1.x to smbmount-2.2.x and - smbumount-2.2.x. Same applies to the man pages. - * Changed minor type in smbmount's man page (changed "\"" by "\'"). This - fixes #34070 (wrong quotes in manpage). - * Used Fabrizio Polacco's <fpolacco@icenet.fi> procedure to create the - Debian package for Samba. This closes #35781 (samba has no pristine - source). - * Changes to /etc/cron.weely/samba: rotate /var/log/{nmb,smb}.old only - if the size of either is different than 0. Also, added comments at the - beginning of this script to explain how rotation of log files works in - Samba. Thanks to ujr@physik.phy.tu-dresden.de (Ulf Jaenicke-Roessler) - for the suggestions. This closes #37490 (cron.weekly script rotates not - used [sn]mb.old files). As I side effect, this should also close - #31462 (still trouble with /etc/cron.weekly/samba). - * Check for old /etc/pam.d/samba file which is not provided by this version - of the Debian Samba package but was provided in older versions. If this - file exists we delete it. We check for this in the postinst. This closes - #37356 (samba put stuff in pam.d that pam complains about) and #34312 - (libpam0g: questions during upgrade). - * Make sure the mode of /etc/samba/smbpasswd is set to 600. This is done - in the postinst script. This closes #35730 (Security problem with - /etc/samba/smbpasswd when upgrading from samba 1.9.18p8-2 to 2.0.3-1). - * I have just checked and it looks like #28748 (smbfsx doesn't "return ") - has been fixed. This might have been fixed since a long time ago. - * Long long standing bug #18488 (smbclient: internal tar is broken) is - closed in this release of Samba. The bug might have been closed for a - long long time, but I did not check for this before. - * Temporary fix to the annoying "Unknown socket option IPTOS_LOWDELAY" - message. This fixes #33698 (socket option IPTOS_LOWDELAY no longer works), - #34148 (warnings from smbd) and #35333 (samba warnings). - - -- Eloy A. Paris <peloy@debian.org> Thu, 20 May 1999 00:35:57 -0400 - -samba (2.0.3-1) unstable; urgency=low - - * New upstream version. - * Removed the convert_smbpasswd.pl program I created and put in - /usr/doc/samba/ because there's a convert_smbpasswd script in the - upstream sources that does the same thing. I modified the postinst - script to use this script instead of the one I created. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Feb 1999 01:35:37 -0400 - -samba (2.0.2-2) unstable; urgency=low - - * Updated the README.Debian file. - * Updated the description of the samba package in the control file. - * The binaries smbmnt and smbumount-2.1.x in the smbfsx package are now - installed setuid root as they should be. This was done by doing a - a "chmod u+s" for each binary in debian/rules and by creating the - file debian/smbfsx.suid. - * Minor patch to source/client/smbumount.c to allow normal users - to umount what they have mounted (problem was a kernel vs. libc6 - size mismatch). I sent the patch upstream. - * Created debian/smbwrapper.dirs so the directory /usr/lib/samba/ is - created. - * Modified debian/rules to move smbwrapper.so from debian/tmp/usr/bin/ to - debian/smbwrapper/usr/lib/samba/. - * Hacked source/smbwrapper/smbsh.c to fix the problem - of smbsh not finding the shared library smbwrapper.so. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 18:11:34 -0400 - -samba (2.0.2-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 01:35:51 -0400 - -samba (2.0.1-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Sat, 6 Feb 1999 06:51:18 -0400 - -samba (2.0.0final-4) unstable; urgency=low - - * The samba postinst made an unwarranted assumption that the file - /etc/samba/smbpasswd exists. If the file did not exist (which is - perfectly valid) the postinst will fail. This fixes #32953. - - -- Eloy A. Paris <peloy@debian.org> Fri, 5 Feb 1999 23:32:46 -0400 - -samba (2.0.0final-3) unstable; urgency=low - - * Added to debian/control a "Depends: ${shlibs:Depends}" line for the - samba-common package so dependencies for this package are set - correctly (thanks to Dark for pointing this out). - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Feb 1999 09:45:21 -0400 - -samba (2.0.0final-2) unstable; urgency=low - - * Finally!!! The first upload to unstable. Sorry for the delay folks - but I have been quite busy lately :-) Another reason for the delay - is that I wanted to ease the migration from Samba 1.9.18p10 and - before to Samba 2.0.0. I changed the location of the config. files - from /etc/ to /etc/samba/ and this made things a little bit harder. - * This package needs 2.2 kernel headers to compile (well, this is - true for the smbfsx package, all others compile fine with 2.0 kernel - headers). - * Created a preinst script for the samba package to take care of the - location migration of smb.conf (from /etc/ to /etc/samba/). The - preinst script also takes care of moving /etc/smbpasswd to its new - location (/etc/samba/). - * Created postinst and postrm scripts to add/remove an entry for swat - in /etc/inetd.conf. - * I had forgotten to install the sambaconfig script so I changed - debian/rules to install this script. - * Added a postrm script for the samba package (I had forgotten to add - this script to the new Samba packages after the migration from 1.9.18 - to 2.0.0). - * Created a small Perl script that is called from the samba postinst - to convert the smbpasswd from the old format used in version prior - to 2.0.0 to the new one used in 2.0.0 and beyond. - * The upgrade process should be automatically now. Please let me know - of any problems you encounter. - - -- Eloy A. Paris <peloy@debian.org> Sat, 23 Jan 1999 09:34:10 -0400 - -samba (2.0.0final-1) experimental; urgency=low - - * Finally!!! Samba 2.0.0 is here! I am not uploading to unstable - because I still have to work out the migration from the old - samba packages to the new ones. I also need to work more on the - new swat package. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Jan 1999 22:40:02 -0400 - -samba (2.0.0beta5-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 5 Jan 1999 00:37:57 -0400 - -samba (2.0.0beta4-1) experimental; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Wed, 23 Dec 1998 18:37:45 -0400 - -samba (2.0.0beta3-1) experimental; urgency=low - - * New upstream version. - * I have just realized that the documentation patches (for man pages) - that I used for the 1.9.18 release are not longer necessary because - there was a major re-write of all the Samba documentation that added - the missing bits of information. So, I have just removed these minor - patches. - - -- Eloy A. Paris <peloy@debian.org> Tue, 8 Dec 1998 12:00:30 -0400 - -samba (2.0.0beta2-1) experimental; urgency=low - - * New upstream version. - * This new version fixes the potential security problem that - was posted to debian-private (using the "message command" parameter - to execute arbitrary commands from messages sent from LinPopUp). - * Changed /etc/init.d/samba to use one of the variables stored in - /etc/samba/debian_config to know how Samba is being run (from inetd or - as daemons) instead of grepping /etc/inetd.conf which may not exist - if the user is running xinetd (this fixes bug #29687 - assumes using - vanilla inetd) - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Nov 1998 23:32:03 -0400 - -samba (2.0.0beta1-1) experimental; urgency=low - - * First beta release of the samba-2.0.0 code. Before the beta I was - working with sources downloaded directly from the CVS server. This - package goes into experimental and I plan to release the new - samba to unstable as soon as it gets out of beta. - * Created several packages out of the Samba sources. They are: - samba (nmbd and smbd daemons + related programs), smbclient (FTP - like command line utility to retrieve files from SMB servers), - swat (Samba Web Administration Tool), samba-common (common files - used by samba, smbclient and swat), smbfsx (smbfs utilities for - kernels >= 2.1.70), smbwrapper and samba-doc (Samba documentation). - * Refreshed debian/samba-doc.docs so recently added docs. are - installed in the samba-doc package. New additions include man - pages in the /usr/doc/samba-doc/htmldocs/ directory. - * Deleted Debian specific nmblookup(1) man page as it is now upstream. - * Added smbtorture to smbclient package. - * Moved rpcclient from the samba package to the smbclient package. - * The Samba daemons (nmbd and smbd) now create a PID file so I changed - all calls to start-stop-daemon to use the PID file. - * Fixed debian/rules to install mksmbpasswd (fixes #27655). - * Modified /etc/init.d/samba so nmbd is started without the -a (append - to the log file instead of overwrite) switch. The new behavior of - nmbd is to NOT overwrite log files, so the -a switch can be deleted - safely. - * Moved from debstd to debhelper. - - -- Eloy A. Paris <peloy@debian.org> Thu, 1 Oct 1998 08:37:41 -0400 - -samba (1.9.18p10-5) frozen unstable; urgency=high - - * Oppsss!!! While fixing bug #26884 I introduced a bug even worse than - the one I was trying to fix: in /etc/init.d/samba I got rid of the test - that tells us whether the Samba daemons are running from inetd or as - standalone daemons. I corrected the problem by editing again - /etc/init.d/samba to uncomment the test. - * Wishlist bug #28298 (typos in samba) was fixed. - * Wishlist bug #28309 (typos in smb.conf) was fixed. - - -- Eloy A. Paris <peloy@debian.org> Wed, 28 Oct 1998 09:11:47 -0400 - -samba (1.9.18p10-4) unstable; urgency=low - - * Minor patch to debian/rules to delete *substvars instead of only - substvars when doing a "debian/rules clean" (thanks to Daniel Jacobowitz - <dmj@andrew.cmu.edu> for this). - * Small patch to source/shmem_sysv.c that eases compilation under - glibc-2.1 (thanks to Daniel <dmj@andrew.cmu.edu> for this). - - -- Eloy A. Paris <peloy@debian.org> Thu, 17 Sep 1998 15:33:49 -0400 - -samba (1.9.18p10-3) unstable; urgency=low - - * Patched smbclient again to fix minor formatting problem introduced - by Magosanyi Arpad's smbclient patch. - - -- Eloy A. Paris <peloy@debian.org> Thu, 3 Sep 1998 11:03:23 -0400 - -samba (1.9.18p10-2) unstable; urgency=low - - * Sync'ed include files for the smbfs utilities with the ones in - kernel 2.1.119. - * Added to the /usr/doc/samba/examples/ directory a new script called - wins2dns (courtesy of Jason Gunthorpe <jgg@deltatee.com>) that - generates BIND sonze files for hosts in the WINS database. - * Patched smbclient to include enhancements by Magosanyi Arpad - <mag@bunuel.tii.matav.hu> that make scripting easier. - - -- Eloy A. Paris <peloy@debian.org> Fri, 28 Aug 1998 13:34:54 -0400 - -samba (1.9.18p10-1) stable unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). I built a 1.9.18p9-1 but I - never released it because an obscure bug was found just a couple - of days before the official release, so the Samba Team stopped - the rollover of 1.9.18p9. - * Updated documentation (new files were added to the docs/ directory - that were not installed in /usr/doc/samba/). - * Fixed long standing bug #7695 (smb.conf's man page doesn't document - 'printing=lprng') - I made a couple of changes to the man page to - include references to lprng. - * Fixes bug #24930 (samba needs to suggest psmisc?). I don't think it - is necessary to make samba suggest psmisc just because the postinst - script mentions to call killall. So, I removed all references to - "killall" in the scripts. - * Fixes bug #25999 (Samba does not by default work with unix password - sync): I added the "passwd program" and "passwd chat" parameters to - the sample smb.conf to reflect the Debian environment. - - -- Eloy A. Paris <peloy@debian.org> Fri, 21 Aug 1998 08:59:18 -0400 - -samba (1.9.18p9-1) unstable; urgency=low - - * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a - description of what has changed). - * Removed Jeremy Allison's patch applied to 1.9.18p8-2 because it is - now part of the new upstream version. - * Corrected small typo in addtosmbpass' man page (fixes #25629). - - -- Eloy A. Paris <peloy@debian.org> Tue, 11 Aug 1998 08:53:08 -0400 - -samba (1.9.18p8-2) frozen unstable; urgency=medium - - * Applied patch received from Jeremy Allison (Samba Team) that fixes - "grave" bug #23903 (samba maps username before authenicating with - NT password server). - * Added a "sleep 2" between "start-stop-daemon --stop" and - "start-stop-daemon --start" in /etc/init.d/samba so when this script - is called with the "restart" parameter the Samba daemons are restarted - properly. This fixes bug #24211 (init.d script doesn't restart). - * Sent start-stop-daemon output in /etc/init.d/samba to /dev/null to - avoid annoying warning messages. - * Added perfomance tune parameters to sample /etc/smb.conf (SO_SNDBUF=4096 - and SO_RCVBUF=4096 to "socket options" in /etc/smb.conf). I can't - find who sent this suggestion to me. If you are listening, drop me a - note and I'll put your name here :-) - - -- Eloy A. Paris <peloy@debian.org> Mon, 29 Jun 1998 08:45:01 -0400 - -samba (1.9.18p8-1) frozen unstable; urgency=low - - * New upstream release that fixes _lots_ of "ugly" bugs. The list of - fixed bugs is too long to include here (see /usr/doc/samba/WHATSNEW.txt). - * Fixed postinst to quote arguments to if [ arg .. ] constructs - (fixes #22881). - * Applied Jeremy Allison's patch (posted to the samba-ntdom mailing - list) that solves a problem with username maps (the Samba Team did - not catch this problem before final 1.9.18p8). - * Made /etc/init.d/samba to print out a warning when Samba is running - from inetd and the user runs /etc/init.d/samba to start|stop|restart - Samba (there's no point on doing this because inetd will start the - daemons again when there is traffic on UDP port 137-139). - - -- Eloy A. Paris <peloy@debian.org> Sat, 13 Jun 1998 00:18:25 -0400 - -samba (1.9.18p7-4) frozen unstable; urgency=medium - - * Fixes the serious problem of having the WINS name server - database getting deleted at boot time. That happened because the - WINS database was being stored under /var/lock/samba/ and all files - under /var/lock/ are deleted at boot time. The place where the WINS - database is stored was moved to /var/samba/. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:24:29 -0400 - -samba (1.9.18p7-3) stable; urgency=high - - * Libc5 version for Bo (stable) that fixes the recently reported - security hole. - - -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:19:33 -0400 - -samba (1.9.18p7-2) frozen unstable; urgency=low - - * Added patches from the non-mantainer upload that make us able - to compile Samba on Alpha systems. This fixes bug #22379. - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 20:38:51 -0400 - -samba (1.9.18p7-1) frozen unstable; urgency=low - - * New upstream release (just bug fixes, no new functionality). - - -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 11:47:32 -0400 - -samba (1.9.18p6-2) frozen unstable; urgency=low - - * Uploaded to frozen (I forgot to upload last version to frozen - so it got installed only in unstable). - - -- Eloy A. Paris <peloy@debian.org> Tue, 12 May 1998 18:10:17 -0400 - -samba (1.9.18p6-1.1) unstable; urgency=low - - * non-maintainer upload for Alpha - * patch needed for source/quota.c (_syscall4() confusion) - - -- Paul Slootman <paul@debian.org> Tue, 12 May 1998 20:39:13 +0200 - -samba (1.9.18p6-1) unstable; urgency=low - - * New upstream release that fixes a possible buffer overflow. - This security hole was reported on BugTraq by Drago. The - previous Debian version (1.9.18p5-1) was not released because - 1.9.18p5 and 1.9.18p6 were released very closely. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 20:28:33 -0400 - -samba (1.9.18p5-1) unstable; urgency=low - - * New upstream release (no new funcionality, just bug fixes - see - /usr/doc/samba/WHATSNEW.txt.gz). - * Backed off Debian patches that were added upstream. - - -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 08:43:53 -0400 - -samba (1.9.18p4-2) frozen unstable; urgency=low - - * Patched smbclient(1) man page to not reference the unsopported - -A parameter (fixes #6863). - * Changes to start nmbd with the -a option (in /etc/init.d/samba - and in the entry added to /etc/inetd.conf). - * Fixed typo in sample smb.conf (fixes #21484). - * Fixed yet another typo in sample smb.conf (fixes #21447). - - -- Eloy A. Paris <peloy@debian.org> Fri, 17 Apr 1998 22:19:23 -0400 - -samba (1.9.18p4-1) frozen unstable; urgency=low - - * New upstream version that fixes several bugs. - * New scheme for keeping track of Debian specific configuration. - This new scheme fixes bug #18624 (Samba always asks the user about - configuration options). New scheme stores Debian specific - configuration information in /etc/samba/debian_config. - * Changes to /usr/sbin/sambaconfig, prerm and postinst to support the - new configuration scheme. - * Moved required kernel 2.1.x include files inside the source tree - so I don't have to do very nasty things like creating crazy - symlinks in /usr/include to make this package compile. This - allows non-root users to build the package and fixes bug - #20104. - * Fixed address of the FSF in /usr/doc/samba/copyright (problem - reported by lintian). - * The /etc/init.d/samba script now supports the force-reload - argument, as required by the policy (problem reported by lintian). - * Added a "rm /etc/cron.weekly/samba" at the end of the postinst. - * Now the samba package can be installed even if no nmbd or smbd processes - are running. This fixes the following bugs: #8917, #9334, #10268, - #10411, #11146 and #13387. - * Provides the original README in /usr/doc/samba. This fixes bug #9693. - * Added a --no-reload option to sambaconfig to not reload Samba - after configuration. - * Created man pages for sambaconfig(8), addtosmbpass(8), - mksmbpasswd(8) and nmblookup(1). - * Corrected small typo in sample /etc/smb.conf. - * Added two new parameters to /etc/smb.conf: "preserver case" and - "short preserve case". - * "rm -Rf /var/lock/samba" in postrm when package is being purged. - * Patched upstream source (nmbd.c) to not overwrite log files when - nmbd is called with the -a parameter (fixes #17704: nmbd ignores - -a option). - * /etc/init.d/samba now starts the nmbd daemon with the -a parameter - to not overwrite log files. - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Mar 1998 21:22:03 -0400 - -samba (1.9.18p3-1) unstable; urgency=low - - * New upstream version. - * Oppsss!!! I really screwed it up (actually, debstd did). - 1.9.18p2-2 still contained man pages (smbmount and smbumount) part - of other packages. This version does have this corrected. If not, - I no longer deserve to be a Debian developer! So, this version - fixes bug #18438 and some of the bugs I claimed to fix in - 1.9.18p2-2. Oh, by the way, I fixed the problem by running debstd - with -m in debian/rules (man pages are installed by "make install" - so it's a bad idea to re-install man pages with debstd). - - -- Eloy A. Paris <peloy@debian.org> Mon, 23 Feb 1998 17:32:42 -0400 - -samba (1.9.18p2-2) unstable; urgency=low - - * Fixes bugs #18017, #17999, #17961, #17932: old 1.9.18p2-1 provided - a man page for smbmount, which conflicts with package smbfs. This - was solved by creating a multi-binary package that produces - package samba and new package smbfsx. - * Fixes bug #18000 (typo in postinst). - * Fixes bug #17958 (postinst asks obsolete question). Actually, - the question is still asked, but only if Samba is run as daemons. - * Created a multi-binary package from the Samba sources: package - samba and new package smbfsx which provides SMB mount utilities - for kernels > 2.1.70. - - -- Eloy A. Paris <peloy@debian.org> Mon, 9 Feb 1998 19:47:05 -0400 - -samba (1.9.18p2-1) unstable; urgency=low - - * New upstream version. - * Removed /etc/cron.weekly/samba because Samba does not handle well - rotation of log files (if the log file is rotated Samba will - continue to log to the rotated file, instead of the just created - one). In any case, Samba will rotate log files after an specific - file size. - - -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jan 1998 22:34:27 -0400 - -samba (1.9.18p1-2) unstable; urgency=low - - * Created a multi-binary package out of the Samba sources to provide - packages samba and smbfsx (userland utilities to work with - smbfs with kernels > 2.1.x. - - -- Eloy A. Paris <peloy@debian.org> Sat, 17 Jan 1998 09:23:48 -0400 - -samba (1.9.18p1-1) unstable; urgency=low - - * New upstream version. - * Created /etc/cron.daily/samba to save a copy of /etc/smbpasswd in - /var/backups/smbpasswd.bak. - - -- Eloy A. Paris <peloy@debian.org> Wed, 14 Jan 1998 13:40:56 -0400 - -samba (1.9.18alpha14-1) unstable; urgency=low - - * New upstream version. - * Added a note to the postinst script telling the user that he/she - needs to run smbpasswd manually after creating a new /etc/smbpasswd - from /etc/passwd. - - -- Eloy A. Paris <peloy@debian.org> Tue, 23 Dec 1997 23:44:37 -0400 - -samba (1.9.18alpha13-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Tue, 16 Dec 1997 13:02:32 -0400 - -samba (1.9.18alpha12-1) unstable; urgency=low - - * New upstream version. - * Conflicts with the sambades package because the new Samba 1.9.18 - series do not depend on the DES libraries to support encrypted - passwords. - * Added parameter "encrypt passwords = yes" to /etc/smb.conf. - * Compiled with support for quotas in disk_free(). - * Home directories are now exported read only by default. - * Re-worked debian/rules. - * Re-worked sample smb.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 4 Dec 1997 22:50:34 -0400 - -samba (1.9.17p4-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable by everybody because some Samba utilities - will fail otherwise when run by non-root users. - * Dropped PAM support while the PAM libraries are ported to libc6. - - -- Eloy A. Paris <peloy@debian.org> Tue, 21 Oct 1997 18:08:49 -0400 - -samba (1.9.17p3-1) unstable; urgency=low - - * New upstream version. - * Made /etc/smb.conf readable only by root as suggested by smbd's man page. - - -- Eloy A. Paris <peloy@debian.org> Wed, 15 Oct 1997 09:21:25 -0400 - -samba (1.9.17p2-2) unstable; urgency=low - - * Running Samba as daemons instead of from inetd. - * Removing netbios entries in /etc/inetd.conf. - - -- Eloy A. Paris <peloy@debian.org> Thu, 9 Oct 1997 23:37:25 -0400 - -samba (1.9.17p2-1) unstable; urgency=low - - * New upstream version that fixes a serious security hole. - * Removed Debian patches added in 1.9.17-1 and 1.9.17p1-1 because - these patches are now part of the upstream release. - - -- Eloy A. Paris <peloy@debian.org> Sun, 28 Sep 1997 22:54:33 -0400 - -samba (1.9.17p1-1) unstable; urgency=low - - * New upstream version. - * Defined symbol _LINUX_C_LIB_VERSION_MAJOR as 6 in includes.h to shut up - compiler warnings. - * Included rpcsvc/ypclnt.h in includes.h to shut up compiler warnings. - * Included crypt.h to have function prototype for crypt(). - * Included netinet/tcp.h to have some socket options included. - * Included netinet/ip.h to have some socket options included. - * Linking with libcrypt (LIBM='... -lcrypt'). Without including this - library smbd generates a seg. fault when authenticating users (?). - - -- Eloy A. Paris <debian.org> Wed, 10 Sep 1997 22:09:18 -0400 - -samba (1.9.17-1) unstable; urgency=low - - * New upstream version (called the "Browse Fix Release") - * Added the option --oknodo to the start-stop-daemon invocation in prerm - script. This was because the prerm was failing because start-stop-daemon - was returning an error code if no nmbd or smbd daemons were found - to kill. - * The function yp_get_default_domain(), referenced in three source - files was part of libc5 but with libc6 (glibc2) it has been moved - to libnss_nis. Since the linker was unable to find the function - I had to add LIBSM='-lnss_nis' to debian/rules. - * Added -DNO_ASMSIGNALH and -DGLIBC2 to FLAGSM in debian/rules - because compiling was failing because of conflicts with glibc2. - * Patched source/includes.h to include termios.h if GLIBC2 is defined. - - -- Eloy A. Paris <peloy@debian.org> Wed, 27 Aug 1997 08:39:32 -0400 - -samba (1.9.17alpha5-1) unstable; urgency=low - - * New upstream version. - - -- Eloy A. Paris <peloy@debian.org> Thu, 14 Aug 1997 18:05:02 -0400 - -samba (1.9.16p11-3) unstable; urgency=low - - * Fixed accidental omission of /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 15 Mar 1997 22:31:26 -0500 - -samba (1.9.16p11-2) unstable; urgency=low - - * Recompiled against newer PAM libraries. - * Added /etc/pam.d/samba. - - -- Klee Dienes <klee@debian.org> Sat, 8 Mar 1997 01:16:28 -0500 - -samba (1.9.16p11-1) unstable; urgency=low - - * New upstream release. - * Added PAM support. - - -- Klee Dienes <klee@debian.org> Tue, 25 Feb 1997 18:00:12 -0500 - -samba (1.9.16p9-2) unstable; urgency=low - - * minor packaging changes - - -- Klee Dienes <klee@sauron.sedona.com> Sun, 3 Nov 1996 11:45:37 -0700 - -samba (1.9.16p9-1) unstable; urgency=low - - * upgraded to new upstream version - - -- Klee Dienes <klee@sauron.sedona.com> Sat, 26 Oct 1996 21:38:20 -0700 - -1.9.16alpha10-1: - 960714 - * Removed Package_Revision from control file. - * Removed -m486 compiler option. - * Added Architecture, Section and Priority fields to control file. - * Upgraded to latest upstream version. - * Uses update-inetd now. - * Added shadow passwords support. - * Fixed Bug#1946: nmbd won't browse - -1.9.15p4-1: - 951128 - * Upgraded to latest upstream version. - * Fixed many bugs. - * Adds Master Browsing support. - * Converted to ELF. - * Fixed bug #1825 - nmbd is now killed when removing samba. - -1.9.14-1: - 950926 Andrew Howell <andrew@it.com.au> - * Upgraded to latest version. - * Fixed Bug #1139 - samba won't print - -1.9.14alpha5-1: - * Fixes killing of inetd problem in debian.postint and debian.postrm - -1.9.14alpha5-0: - 950704 Andrew Howell <andrew@it.com.au> - * Taken over samba package from Bruce Perens. - * Upgraded to newest version of samba. - -1.9.02-1: - 9-January-1994 Bruce Perens <Bruce@Pixar.com> - * Added Debian GNU/Linux package maintenance system files, and - configured for Debian systems. diff --git a/packaging/Debian/debian-woody/config.cache b/packaging/Debian/debian-woody/config.cache deleted file mode 100644 index 8872a27b76..0000000000 --- a/packaging/Debian/debian-woody/config.cache +++ /dev/null @@ -1,221 +0,0 @@ -# -# 22 August 2001 Steve Langasek <vorlon@debian.org> -# -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -# -# This config.cache file contains a list of acceptable autoconf -# values which can be used in compiling Samba for Debian woody/sid. -# -# Autoconf sorts options alphabetically in its output. This file -# groups options logically. - - -# Load any architecture-specific settings -if [ -n "$DEB_HOST_GNU_TYPE" \ - -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then - . ../debian/config.cache.${DEB_HOST_GNU_TYPE} -fi - - -# This is at the top because it's most in need of regular tweaking. -# These are options which are supported on 2.4 kernels, but not on 2.2 -# kernels. - -samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} -samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} -samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} - - -# These are present in 2.2 kernels, but not in 2.0... - -samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} -samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} - - -# Various basic libc/compiler stuff that it's blindingly obvious that -# Linux supports (now watch me get bitten for saying that) - -ac_cv_c_const=${ac_cv_c_const=yes} -ac_cv_c_inline=${ac_cv_c_inline=inline} -samba_cv_volatile=${samba_cv_volatile=yes} -ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} -ac_cv_func_bzero=${ac_cv_func_bzero=yes} -ac_cv_func_chmod=${ac_cv_func_chmod=yes} -ac_cv_func_chown=${ac_cv_func_chown=yes} -ac_cv_func_chroot=${ac_cv_func_chroot=yes} -ac_cv_func_connect=${ac_cv_func_connect=yes} -ac_cv_func_dup2=${ac_cv_func_dup2=yes} -ac_cv_func_execl=${ac_cv_func_execl=yes} -ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} -ac_cv_func_fchown=${ac_cv_func_fchown=yes} -ac_cv_func_fstat=${ac_cv_func_fstat=yes} -ac_cv_func_fsync=${ac_cv_func_fsync=yes} -ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} -ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} -ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} -ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} -ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} -ac_cv_func_glob=${ac_cv_func_glob=yes} -ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} -ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} -ac_cv_func_llseek=${ac_cv_func_llseek=yes} -ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} -ac_cv_func_memmove=${ac_cv_func_memmove=yes} -ac_cv_func_memset=${ac_cv_func_memset=yes} -ac_cv_func_mktime=${ac_cv_func_mktime=yes} -ac_cv_func_pipe=${ac_cv_func_pipe=yes} -ac_cv_func_poll=${ac_cv_func_poll=yes} -ac_cv_func_pread=${ac_cv_func_pread=yes} -ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} -ac_cv_func_rand=${ac_cv_func_rand=yes} -ac_cv_func_random=${ac_cv_func_random=yes} -ac_cv_func_readlink=${ac_cv_func_readlink=yes} -ac_cv_func_rename=${ac_cv_func_rename=yes} -ac_cv_func_select=${ac_cv_func_select=yes} -ac_cv_func_setenv=${ac_cv_func_setenv=yes} -ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} -ac_cv_func_setsid=${ac_cv_func_setsid=yes} -ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} -ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} -ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} -ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} -ac_cv_func_srand=${ac_cv_func_srand=yes} -ac_cv_func_srandom=${ac_cv_func_srandom=yes} -ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} -ac_cv_func_strchr=${ac_cv_func_strchr=yes} -ac_cv_func_strdup=${ac_cv_func_strdup=yes} -ac_cv_func_strerror=${ac_cv_func_strerror=yes} -ac_cv_func_strftime=${ac_cv_func_strftime=yes} -ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} -ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} -ac_cv_func_symlink=${ac_cv_func_symlink=yes} -ac_cv_func_usleep=${ac_cv_func_usleep=yes} -ac_cv_func_utime=${ac_cv_func_utime=yes} -ac_cv_func_utimes=${ac_cv_func_utimes=yes} -ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} -ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} -ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} -ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} -ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} -ac_cv_type_size_t=${ac_cv_type_size_t=yes} -ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} -samba_cv_socklen_t=${samba_cv_socklen_t=yes} - -# Yes, we know Linux supports fcntl locking. Just ignore -# any errors caused by building on an NFS mount. -samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} - - -# smbwrapper doesn't work because the glibc maintainers don't want -# to support transparent userland VFS. We might as well preempt -# any checks for shadowed symbols that are only useful for smbwrapper. - -ac_cv_func___chdir=${ac_cv_func___chdir=no} -ac_cv_func__chdir=${ac_cv_func__chdir=no} -ac_cv_func___close=${ac_cv_func___close=no} -ac_cv_func__close=${ac_cv_func__close=no} -ac_cv_func___closedir=${ac_cv_func___closedir=no} -ac_cv_func__closedir=${ac_cv_func__closedir=no} -ac_cv_func___dup=${ac_cv_func___dup=no} -ac_cv_func__dup=${ac_cv_func__dup=no} -ac_cv_func___dup2=${ac_cv_func___dup2=no} -ac_cv_func__dup2=${ac_cv_func__dup2=no} -ac_cv_func___fchdir=${ac_cv_func___fchdir=no} -ac_cv_func__fchdir=${ac_cv_func__fchdir=no} -ac_cv_func___fcntl=${ac_cv_func___fcntl=no} -ac_cv_func__fcntl=${ac_cv_func__fcntl=no} -ac_cv_func___fork=${ac_cv_func___fork=no} -ac_cv_func__fork=${ac_cv_func__fork=no} -ac_cv_func___fstat=${ac_cv_func___fstat=no} -ac_cv_func__fstat=${ac_cv_func__fstat=no} -ac_cv_func___fstat64=${ac_cv_func___fstat64=no} -ac_cv_func__fstat64=${ac_cv_func__fstat64=no} -ac_cv_func___fxstat=${ac_cv_func___fxstat=no} -ac_cv_func___getcwd=${ac_cv_func___getcwd=no} -ac_cv_func__getcwd=${ac_cv_func__getcwd=no} -ac_cv_func___getdents=${ac_cv_func___getdents=no} -ac_cv_func__getdents=${ac_cv_func__getdents=no} -ac_cv_func___llseek=${ac_cv_func___llseek=no} -ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} -ac_cv_func__llseek=${ac_cv_func__llseek=no} -ac_cv_func___lseek=${ac_cv_func___lseek=no} -ac_cv_func__lseek=${ac_cv_func__lseek=no} -ac_cv_func___lstat=${ac_cv_func___lstat=no} -ac_cv_func__lstat=${ac_cv_func__lstat=no} -ac_cv_func___lstat64=${ac_cv_func___lstat64=no} -ac_cv_func__lstat64=${ac_cv_func__lstat64=no} -ac_cv_func___lxstat=${ac_cv_func___lxstat=no} -ac_cv_func___open=${ac_cv_func___open=no} -ac_cv_func__open=${ac_cv_func__open=no} -ac_cv_func___open64=${ac_cv_func___open64=no} -ac_cv_func__open64=${ac_cv_func__open64=no} -ac_cv_func___opendir=${ac_cv_func___opendir=no} -ac_cv_func__opendir=${ac_cv_func__opendir=no} -ac_cv_func___pread=${ac_cv_func___pread=no} -ac_cv_func__pread=${ac_cv_func__pread=no} -ac_cv_func___pread64=${ac_cv_func___pread64=no} -ac_cv_func__pread64=${ac_cv_func__pread64=no} -ac_cv_func___pwrite=${ac_cv_func___pwrite=no} -ac_cv_func__pwrite=${ac_cv_func__pwrite=no} -ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} -ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} -ac_cv_func___read=${ac_cv_func___read=no} -ac_cv_func__read=${ac_cv_func__read=no} -ac_cv_func___readdir=${ac_cv_func___readdir=no} -ac_cv_func__readdir=${ac_cv_func__readdir=no} -ac_cv_func___readdir64=${ac_cv_func___readdir64=no} -ac_cv_func__readdir64=${ac_cv_func__readdir64=no} -ac_cv_func___seekdir=${ac_cv_func___seekdir=no} -ac_cv_func__seekdir=${ac_cv_func__seekdir=no} -ac_cv_func___stat=${ac_cv_func___stat=no} -ac_cv_func__stat=${ac_cv_func__stat=no} -ac_cv_func___stat64=${ac_cv_func___stat64=no} -ac_cv_func__stat64=${ac_cv_func__stat64=no} -ac_cv_func___telldir=${ac_cv_func___telldir=no} -ac_cv_func__telldir=${ac_cv_func__telldir=no} -ac_cv_func___write=${ac_cv_func___write=no} -ac_cv_func__write=${ac_cv_func__write=no} -ac_cv_func___xstat=${ac_cv_func___xstat=no} - - - -# Miscellaneous stuff that isn't, and shouldn't be, available -# in Debian. Those interested in building debs for other systems may -# need to remove some of these defines. - -ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} -ac_cv_func_crypt16=${ac_cv_func_crypt16=no} -ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} -ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} -ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} -ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} -ac_cv_func_rdchk=${ac_cv_func_rdchk=no} -ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} -ac_cv_func_setgidx=${ac_cv_func_setgidx=no} -ac_cv_func_setluid=${ac_cv_func_setluid=no} -ac_cv_func_setpriv=${ac_cv_func_setpriv=no} -ac_cv_func_setuidx=${ac_cv_func_setuidx=no} -ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} -ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} -ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} -ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} -ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} -ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} -ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} -ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} -ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} -ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} diff --git a/packaging/Debian/debian-woody/config.cache.alpha-linux b/packaging/Debian/debian-woody/config.cache.alpha-linux deleted file mode 100644 index 6d17192026..0000000000 --- a/packaging/Debian/debian-woody/config.cache.alpha-linux +++ /dev/null @@ -1,12 +0,0 @@ -# 22 Aug 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the alpha-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-woody/config.cache.sparc-linux b/packaging/Debian/debian-woody/config.cache.sparc-linux deleted file mode 100644 index a2a21b1d3a..0000000000 --- a/packaging/Debian/debian-woody/config.cache.sparc-linux +++ /dev/null @@ -1,13 +0,0 @@ -# 24 Spe 2001 Steve Langasek <vorlon@debian.org> - -# This file contains autoconf settings specific to the sparc-linux -# platform that should be preloaded when building for this architecture. - - -# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but -# Linux 2.4 does. Ensure that packages compiled for woody remain -# compatible with 2.2 kernels, even if the build machine is running 2.4. -samba_cv_have_setresuid=${samba_cv_have_setresuid=no} -samba_cv_have_setresgid=${samba_cv_have_setresgid=no} -samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} -samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-woody/control b/packaging/Debian/debian-woody/control deleted file mode 100644 index 4ef4445695..0000000000 --- a/packaging/Debian/debian-woody/control +++ /dev/null @@ -1,201 +0,0 @@ -Source: samba -Section: net -Priority: optional -Maintainer: Simo Sorce <idra@samba.org> -Uploaders: Simo Sorce <idra@samba.org> -Build-Depends: debhelper (>= 4.0.2), libpam0g-dev, libreadline4-dev, libcupsys2-dev, autoconf, acl-dev (>= 2.0.8-1), libacl1 (>= 2.0.8-1), attr-dev (>= 2.0.7-1), libattr1 (>= 2.0.7-1), libkrb5-dev, libldap2-dev, python2.2-dev -Standards-Version: 3.5.6.1 - -Package: samba -Architecture: any -Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.72-35), libpam-modules -Replaces: samba-common (<= 3.0.0-1) -Suggests: samba-doc -Description: a LanManager-like file and printer server for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the components necessary to turn your - Debian GNU/Linux box into a powerful file and printer server. - . - Currently, the Samba Debian packages consist of the following: - . - samba - LanManager-like file and printer server for Unix. - samba-common - Samba common files used by both the server and the client. - smbclient - LanManager-like simple client for Unix. - swat - Samba Web Administration Tool - samba-doc - Samba documentation. - smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). - mount.cifs - Mount and unmount commnads for cifsvfs (kernels 2.6.x and above). - libpam-smbpass - pluggable authentication module for SMB password database - libsmbclient - Shared library that allows applications to talk to SMB servers - libsmbclient-dev - libsmbclient shared libraries - winbind: Service to resolve user and group information from Windows NT servers - python2.2-samba: Python bindings that allow access to various aspects of Samba - . - It is possible to install a subset of these packages depending on - your particular needs. For example, to access other SMB servers you - should only need the smbclient and samba-common packages. - -Package: samba-common -Architecture: any -Depends: debconf, libpam-modules, ${shlibs:Depends} -Replaces: samba (<< 3.0.0-1) -Description: Samba common files used by both the server and the client - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the common files that are used by both the server - (provided in the samba package) and the client (provided in the smbclient - package). - -Package: smbclient -Architecture: any -Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} -Replaces: samba (<< 3.0.0-1) -Provides: samba-client -Suggests: smbfs -Description: a LanManager-like simple client for Unix - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains some client components of the Samba suite. In - particular it includes the command line utilities smbclient, smbtar, - and smbspool. If you want to mount shares exported from Microsoft - Windows machines or a Samba server you must install the smbfs package. - -Package: swat -Architecture: any -Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends} -Recommends: samba-doc -Description: Samba Web Administration Tool - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains the components of the Samba suite that are needed - for Web administration of the Samba server. - . - Note: if you want to use the on-line documentation that is accesible - through the Swat front-end you must install the samba-doc package. - -Package: samba-doc -Section: doc -Architecture: all -Description: Samba documentation - The Samba software suite is a collection of programs that - implements the SMB protocol for unix systems, allowing you to serve - files and printers to Windows, NT, OS/2 and DOS clients. This protocol - is sometimes also referred to as the LanManager or NetBIOS protocol. - . - This package contains all the documentation that comes in the original - tarball. - -Package: smbfs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Suggests: smbclient -Replaces: smbfsx -Conflicts: smbfsx, suidmanager (<< 0.50) -Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) - Smbfs is a filesystem which understands the SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - . - If you want to use command-line utilities like smbclient, smbtar - and/or smbspool you just need to install the smbclient package. - . - Starting with the Debian Samba packages version 2.2.0-1, the old smbfs - utilities for 2.0.x have been removed. There are no wrapper scripts - that call a specific smbmount/smbumount depending on the kernel - version. If you are using a 2.0.x kernel please upgrade or use the - latest Samba 2.0.7 Debian package. - -Package: mount.cifs -Section: otherosfs -Priority: optional -Architecture: any -Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} -Description: mount and umount commands for the cifsvfs (for kernels >= than 2.6.x) - CIFS-VFS is a filesystem which understands the CIFS/SMB protocol. - This is the protocol Windows for Workgroups, Windows NT or - LAN Manager use to talk to each other. It was inspired by - samba, the program by Andrew Tridgell that turns any unix - site into a file server for DOS or Windows clients. - -Package: libpam-smbpass -Section: admin -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Suggests: samba -Description: pluggable authentication module for SMB password database - This is a stackable PAM module that allows a system administrator to easily - migrate to using encrypted passwords for Samba and to keep smb passwords in - sync with unix passwords. Unlike other solutions, it does this without - requiring users to change their existing passwords or login to Samba using - cleartext passwords. - -Package: libsmbclient -Section: libs -Priority: extra -Architecture: any -Depends: ${shlibs:Depends} -Description: shared library that allows applications to talk to SMB servers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient shared library. - -Package: libsmbclient-dev -Section: libdevel -Priority: extra -Architecture: any -Depends: libsmbclient (= ${Source-Version}) -Description: libsmbclient static libraries and headers - libsmbclient allows to write applications that use the SMB protocol. - This gives applications the ability to talk to Microsoft Windows servers - and Unix servers running Samba. - . - This package contains the libsmbclient static libraries and headers - needed to build applications that use SMB services. - -Package: winbind -Section: net -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Replaces: samba (<= 3.0.0-1) -Description: service to resolve user and group information from Windows NT servers - This package provides the winbindd daemon, which provides a - service for the Name Service Switch capability that is present - in most modern C libraries (like the GNU C Library - glibc.) - . - The service provided by winbindd is called `winbind' and - can be used to resolve user and group information from a - Windows NT server. The service can also provide authentication - services via an associated PAM module. - -Package: python2.2-samba -Section: python -Priority: optional -Architecture: any -Depends: ${shlibs:Depends}, python2.2 -Description: Python bindings that allow access to various aspects of Samba - The Samba Python bindings allow you to access various aspects of Samba. - At the moment their status is "experimental" but they have been reported - to work well. - . - See /usr/share/doc/python2.2-samba/examples for a couple of examples. diff --git a/packaging/Debian/debian-woody/copyright b/packaging/Debian/debian-woody/copyright deleted file mode 100644 index 54d90eb9cc..0000000000 --- a/packaging/Debian/debian-woody/copyright +++ /dev/null @@ -1,27 +0,0 @@ -This is the Debian Linux prepackaged version of the Samba SMB -(LAN-Manager) server. Samba was written by Andrew Tridgell -<Andrew.Tridgell@anu.edu.au> and many others. - -This package was put together by Eloy Paris <peloy@debian.org> -and Steve Langasek <vorlon@debian.org> based on previous work by -Klee Dienes <klee@debian.org>, Andrew Howell <andrew@it.com.au> -and Bruce Perens <bruce@pixar.com> from sources found at -<URL:ftp://ftp.samba.org/pub/samba>. - -Copyright: - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -On Debian GNU/Linux systems, the complete text of the GNU General -Public License can be found in `/usr/share/common-licenses/GPL'. diff --git a/packaging/Debian/debian-woody/gdbcommands b/packaging/Debian/debian-woody/gdbcommands deleted file mode 100644 index 5774b9ae31..0000000000 --- a/packaging/Debian/debian-woody/gdbcommands +++ /dev/null @@ -1,2 +0,0 @@ -bt -quit diff --git a/packaging/Debian/debian-woody/libpam-smbpass.docs b/packaging/Debian/debian-woody/libpam-smbpass.docs deleted file mode 100644 index 89fbbf9042..0000000000 --- a/packaging/Debian/debian-woody/libpam-smbpass.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/pam_smbpass/README -source/pam_smbpass/TODO diff --git a/packaging/Debian/debian-woody/libpam-smbpass.examples b/packaging/Debian/debian-woody/libpam-smbpass.examples deleted file mode 100644 index 48d841b2c1..0000000000 --- a/packaging/Debian/debian-woody/libpam-smbpass.examples +++ /dev/null @@ -1,5 +0,0 @@ -source/pam_smbpass/samples/README -source/pam_smbpass/samples/kdc-pdc -source/pam_smbpass/samples/password-mature -source/pam_smbpass/samples/password-migration -source/pam_smbpass/samples/password-sync diff --git a/packaging/Debian/debian-woody/libpam-smbpass.files b/packaging/Debian/debian-woody/libpam-smbpass.files deleted file mode 100644 index 4263df5c0f..0000000000 --- a/packaging/Debian/debian-woody/libpam-smbpass.files +++ /dev/null @@ -1 +0,0 @@ -lib/security/pam_smbpass.so diff --git a/packaging/Debian/debian-woody/libsmbclient-dev.examples b/packaging/Debian/debian-woody/libsmbclient-dev.examples deleted file mode 100644 index 2094c40b55..0000000000 --- a/packaging/Debian/debian-woody/libsmbclient-dev.examples +++ /dev/null @@ -1 +0,0 @@ -examples/libsmbclient/ diff --git a/packaging/Debian/debian-woody/libsmbclient-dev.files b/packaging/Debian/debian-woody/libsmbclient-dev.files deleted file mode 100644 index a52c17cfc5..0000000000 --- a/packaging/Debian/debian-woody/libsmbclient-dev.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/lib/libsmbclient.a -usr/lib/libsmbclient.so -usr/include/libsmbclient.h diff --git a/packaging/Debian/debian-woody/libsmbclient.files b/packaging/Debian/debian-woody/libsmbclient.files deleted file mode 100644 index 18b7f3b165..0000000000 --- a/packaging/Debian/debian-woody/libsmbclient.files +++ /dev/null @@ -1,2 +0,0 @@ -usr/lib/libsmbclient.so.0.1 -usr/lib/libsmbclient.so.0 diff --git a/packaging/Debian/debian-woody/libsmbclient.shlibs b/packaging/Debian/debian-woody/libsmbclient.shlibs deleted file mode 100644 index 9c6eea200a..0000000000 --- a/packaging/Debian/debian-woody/libsmbclient.shlibs +++ /dev/null @@ -1 +0,0 @@ -libsmbclient 0 libsmbclient (>= 2.2.2-11) diff --git a/packaging/Debian/debian-woody/mksmbpasswd.8 b/packaging/Debian/debian-woody/mksmbpasswd.8 deleted file mode 100644 index 0a500102e8..0000000000 --- a/packaging/Debian/debian-woody/mksmbpasswd.8 +++ /dev/null @@ -1,28 +0,0 @@ -.TH MKSMBPASSWD 8 12-Apr-1998 -.SH NAME -mksmbpasswd \- formats a /etc/passwd entry for a smbpasswd file -.SH SYNOPSIS -mksmbpasswd cat /etc/passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd -.SH DESCRIPTION -.B mksmbpasswd -should be used only once, the first time Samba is installed. The idea -is to ease accounts creation by transferring all user accounts from -/etc/passwd to /etc/samba/smbpasswd. -.PP -Please note that passwords are not transferred automatically from -/etc/passwd to the new /etc/samba/smbpasswd file. After running -.B mksmbpasswd -all accounts are disabled so the system administrator must run -smbpasswd for each account that needs to be enable. -.SH FILES -.TP -/etc/passwd -System wide accounts file -.TP -/etc/samba/smbpasswd -Encrypted passwords file for the Samba daemons -.SH SEE ALSO -samba(7), nmbd(8), smbd(8) -.SH AUTHOR -Eloy A. Paris <peloy@debian.org> (man page based on sendmailconfig's man page -by Robert Leslie <rob@mars.org>) diff --git a/packaging/Debian/debian-woody/mksmbpasswd.awk b/packaging/Debian/debian-woody/mksmbpasswd.awk deleted file mode 100644 index a7b41a725d..0000000000 --- a/packaging/Debian/debian-woody/mksmbpasswd.awk +++ /dev/null @@ -1,5 +0,0 @@ -#!/usr/bin/awk -f -BEGIN {FS=":" - printf("#\n# SMB password file.\n#\n") - } -{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U ]:LCT-00000000:%s\n", $1, $3, $5) } diff --git a/packaging/Debian/debian-woody/mount.cifs.files b/packaging/Debian/debian-woody/mount.cifs.files deleted file mode 100644 index d5bb66ede4..0000000000 --- a/packaging/Debian/debian-woody/mount.cifs.files +++ /dev/null @@ -1,2 +0,0 @@ -sbin/mount.cifs -usr/share/man/man8/mount.cifs.8 diff --git a/packaging/Debian/debian-woody/panic-action b/packaging/Debian/debian-woody/panic-action deleted file mode 100644 index 13f773c1ef..0000000000 --- a/packaging/Debian/debian-woody/panic-action +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh - -# Redirect all output to our mail command -( - # We must be given a pid to look at - if [ -z "$1" ]; then - echo "$0 called with no arguments." - exit 1 - fi - - if [ ! -d "/proc/$1" ]; then - echo "$0: No such process: $1" - exit 1 - fi - - # Find out what binary we're debugging - BINARYNAME=`readlink "/proc/$1/exe"` - - # Generic header for our email - echo "The Samba 'panic action' script, $0," - echo "was called for pid $1 ($BINARYNAME)." - echo - - if [ -z "$BINARYNAME" ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, the executable could not be found for process $1." - echo "It may have died unexpectedly, or you may not have permission to" - echo "debug the process." - exit 1 - fi - - # No debugger - if [ ! -x /usr/bin/gdb ]; then - echo "This means there was a problem with the program, such as a segfault." - echo "However, gdb was not found on your system, so the error could not be" - echo "debugged. Please install the gdb package so that debugging information is" - echo "available the next time such a problem occurs." - exit 1 - fi - - echo "Below is a backtrace for this process generated with gdb, which shows" - echo "the state of the program at the time the error occured. You are" - echo "encouraged to submit this information as a bug report to Debian. For" - echo "information about the procedure for submitting bug reports , please see" - echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage." - echo - gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1" -) | mail -s "Segfault in Samba" root diff --git a/packaging/Debian/debian-woody/patches/documentation.patch b/packaging/Debian/debian-woody/patches/documentation.patch deleted file mode 100644 index ab64790fc9..0000000000 --- a/packaging/Debian/debian-woody/patches/documentation.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- samba_3_0/docs/manpages/swat.8.orig 2003-06-06 16:16:24.000000000 -0400 -+++ samba_3_0/docs/manpages/swat.8 2003-06-06 16:25:13.000000000 -0400 -@@ -89,6 +89,13 @@ - .SH "INSTALLATION" - - .PP -+\fBDebian-specific Note\fR: all these steps have already been done for -+you. However, by default, swat is not enabled. This has been done for -+security reasons. To enable swat you need to edit /etc/inetd.conf, -+uncomment the swat entry (usually at the end of the file), and then -+restart inetd. -+ -+.PP - Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&. - - .PP -@@ -96,13 +103,13 @@ - - .TP 3 - \(bu --/usr/local/samba/sbin/swat -+/usr/sbin/swat - .TP - \(bu --/usr/local/samba/swat/images/* -+/usr/share/samba/swat/images/* - .TP - \(bu --/usr/local/samba/swat/help/* -+/usr/share/samba/swat/help/* - .LP - - .SS "Inetd Installation" -@@ -114,7 +121,7 @@ - You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&. - - .PP --In \fI/etc/services\fR you need to add a line like this: -+In \fI/etc/services\fR you need to add a line like this (not needed for Debian): - - .PP - \fBswat 901/tcp\fR -@@ -126,10 +133,10 @@ - the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&. - - .PP --In \fI/etc/inetd\&.conf\fR you should add a line like this: -+In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it. You need to uncomment the line, though, because it is added commented out for security reasons): - - .PP --\fBswat stream tcp nowait\&.400 root /usr/local/samba/sbin/swat swat\fR -+\fBswat stream tcp nowait.400 root /usr/sbin/swat swat\fR - - .PP - One you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill -1 PID \fR where PID is the process ID of the inetd daemon\&. -@@ -155,8 +162,8 @@ - - - .TP --\fI/usr/local/samba/lib/smb\&.conf\fR --This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&. -+\fI/etc/samba/smb\&.conf\fR -+This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&. - - - .SH "WARNINGS" diff --git a/packaging/Debian/debian-woody/patches/fhs.patch b/packaging/Debian/debian-woody/patches/fhs.patch deleted file mode 100644 index 3fce15de78..0000000000 --- a/packaging/Debian/debian-woody/patches/fhs.patch +++ /dev/null @@ -1,543 +0,0 @@ -diff -uNr samba-3.0.0beta2.orig/source/Makefile.in samba-3.0.0beta2/source/Makefile.in ---- samba-3.0.0beta2.orig/source/Makefile.in 2003-07-02 23:26:46.000000000 -0500 -+++ samba-3.0.0beta2/source/Makefile.in 2003-07-02 23:19:46.000000000 -0500 -@@ -90,6 +91,13 @@ - # the directory where lock files go - LOCKDIR = @lockdir@ - -+# FHS directories; equal to LOCKDIR if not using --with-fhs -+CACHEDIR = @cachedir@ -+STATEDIR = @statedir@ -+ -+# Where to look for (and install) codepage databases. -+CODEPAGEDIR = @codepagedir@ -+ - # the directory where pid files go - PIDDIR = @piddir@ - # man pages language(s) -@@ -114,7 +122,7 @@ - PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\" - PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \ - -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\" --PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -+PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\" -DCACHEDIR=\"$(CACHEDIR)\" -DSTATEDIR=\"$(STATEDIR)\" - PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS) - - # Note that all executable programs now provide for an optional executable suffix. -@@ -1203,7 +1211,7 @@ - @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS) - - installdat: installdirs -- @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir) -+ @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(CODEPAGEDIR) $(srcdir) - - installswat: installdirs - @$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR)$(SWATDIR) $(srcdir) -diff -uNr samba-3.0.0beta2.orig/source/configure.in samba-3.0.0beta2/source/configure.in ---- samba-3.0.0beta2.orig/source/configure.in 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/configure.in 2003-07-02 23:19:02.000000000 -0500 -@@ -17,14 +17,18 @@ - [ --with-fhs Use FHS-compliant paths (default=no)], - [ case "$withval" in - yes) -- lockdir="\${VARDIR}/lib/samba" -+ lockdir="\${VARDIR}/run/samba" -- piddir="\${VARDIR}/run" -+ piddir="\${VARDIR}/run/samba" - mandir="\${prefix}/share/man" - logfilebase="\${VARDIR}/log/samba" - privatedir="\${CONFIGDIR}/private" - libdir="\${prefix}/lib/samba" - configdir="${sysconfdir}/samba" -- swatdir="\${DATADIR}/samba/swat" -+ swatdir="\${DATADIR}/samba/swat" -+ codepagedir="\${DATADIR}/samba" -+ statedir="\${VARDIR}/lib/samba" -+ cachedir="\${VARDIR}/cache/samba" -+ AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths]) - ;; - esac]) - -@@ -134,6 +141,9 @@ - AC_SUBST(swatdir) - AC_SUBST(bindir) - AC_SUBST(sbindir) -+AC_SUBST(codepagedir) -+AC_SUBST(statedir) -+AC_SUBST(cachedir) - - dnl Unique-to-Samba variables we'll be playing with. - AC_SUBST(SHELL) -diff -uNr samba-3.0.0beta2.orig/source/dynconfig.c samba-3.0.0beta2/source/dynconfig.c ---- samba-3.0.0beta2.orig/source/dynconfig.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/dynconfig.c 2003-07-02 23:19:02.000000000 -0500 -@@ -53,6 +53,13 @@ - pstring dyn_LMHOSTSFILE = LMHOSTSFILE; - - /** -+ * @brief Samba data directory. -+ * -+ * @sa data_path() to get the path to a file inside the CODEPAGEDIR. -+ **/ -+pstring dyn_CODEPAGEDIR = CODEPAGEDIR; -+ -+/** - * @brief Samba library directory. - * - * @sa lib_path() to get the path to a file inside the LIBDIR. -@@ -70,3 +77,27 @@ - - const pstring dyn_SMB_PASSWD_FILE = SMB_PASSWD_FILE; - const pstring dyn_PRIVATE_DIR = PRIVATE_DIR; -+ -+ -+/* In non-FHS mode, these should be configurable using 'lock dir ='; -+ but in FHS mode, they are their own directory. Implement as wrapper -+ functions so that everything can still be kept in dynconfig.c. -+ */ -+ -+char *dyn_STATEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return STATEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -+ -+char *dyn_CACHEDIR(void) -+{ -+#ifdef FHS_COMPATIBLE -+ return CACHEDIR; -+#else -+ return lp_lockdir(); -+#endif -+} -diff -uNr samba-3.0.0beta2.orig/source/groupdb/mapping.c samba-3.0.0beta2/source/groupdb/mapping.c ---- samba-3.0.0beta2.orig/source/groupdb/mapping.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/groupdb/mapping.c 2003-07-02 23:19:02.000000000 -0500 -@@ -134,7 +134,7 @@ - - if (tdb && local_pid == sys_getpid()) - return True; -- tdb = tdb_open_log(lock_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open group mapping database\n")); - return False; -diff -uNr samba-3.0.0beta2.orig/source/include/dynconfig.h samba-3.0.0beta2/source/include/dynconfig.h ---- samba-3.0.0beta2.orig/source/include/dynconfig.h 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/include/dynconfig.h 2003-07-02 23:19:02.000000000 -0500 -@@ -31,8 +31,12 @@ - extern pstring dyn_CONFIGFILE; - extern pstring dyn_LOGFILEBASE, dyn_LMHOSTSFILE; - extern pstring dyn_LIBDIR; -+extern pstring dyn_CODEPAGEDIR; - extern const fstring dyn_SHLIBEXT; - extern const pstring dyn_LOCKDIR; - extern const pstring dyn_PIDDIR; - extern const pstring dyn_SMB_PASSWD_FILE; - extern const pstring dyn_PRIVATE_DIR; -+ -+char *dyn_STATEDIR(void); -+char *dyn_CACHEDIR(void); -diff -uNr samba-3.0.0beta2.orig/source/intl/lang_tdb.c samba-3.0.0beta2/source/intl/lang_tdb.c ---- samba-3.0.0beta2.orig/source/intl/lang_tdb.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/intl/lang_tdb.c 2003-07-02 23:19:02.000000000 -0500 -@@ -123,7 +123,7 @@ - /* if no lang then we don't translate */ - if (!lang) return True; - -- asprintf(&msg_path, "%s.msg", lib_path((const char *)lang)); -+ asprintf(&msg_path, "%s.msg", data_path((const char *)lang)); - if (stat(msg_path, &st) != 0) { - /* the msg file isn't available */ - free(msg_path); -@@ -131,7 +131,7 @@ - } - - -- asprintf(&path, "%s%s.tdb", lock_path("lang_"), lang); -+ asprintf(&path, "%s%s.tdb", state_path("lang_"), lang); - - tdb = tdb_open_log(path, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0644); - if (!tdb) { -diff -uNr samba-3.0.0beta2.orig/source/lib/account_pol.c samba-3.0.0beta2/source/lib/account_pol.c ---- samba-3.0.0beta2.orig/source/lib/account_pol.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/lib/account_pol.c 2003-07-02 23:19:02.000000000 -0500 -@@ -36,7 +36,7 @@ - - if (tdb && local_pid == sys_getpid()) - return True; -- tdb = tdb_open_log(lock_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb = tdb_open_log(state_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb) { - DEBUG(0,("Failed to open account policy database\n")); - return False; -diff -uNr samba-3.0.0beta2.orig/source/lib/util.c samba-3.0.0beta2/source/lib/util.c ---- samba-3.0.0beta2.orig/source/lib/util.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/lib/util.c 2003-07-02 23:19:02.000000000 -0500 -@@ -2190,6 +2190,61 @@ - } - - /** -+ * @brief Returns an absolute path to a file in the Samba data directory. -+ * -+ * @param name File to find, relative to CODEPAGEDIR. -+ * -+ * @retval Pointer to a static #pstring containing the full path. -+ **/ -+ -+char *data_path(const char *name) -+{ -+ static pstring fname; -+ snprintf(fname, sizeof(fname), "%s/%s", dyn_CODEPAGEDIR, name); -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba state directory -+ *****************************************************************/ -+char *state_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_STATEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/***************************************************************** -+a useful function for returning a path in the Samba cache directory -+ *****************************************************************/ -+char *cache_path(char *name) -+{ -+ static pstring fname; -+ -+ pstrcpy(fname,dyn_CACHEDIR()); -+ trim_string(fname,"","/"); -+ -+ if (!directory_exist(fname,NULL)) { -+ mkdir(fname,0755); -+ } -+ -+ pstrcat(fname,"/"); -+ pstrcat(fname,name); -+ -+ return fname; -+} -+ -+/** - * @brief Returns the platform specific shared library extension. - * - * @retval Pointer to a static #fstring containing the extension. -diff -uNr samba-3.0.0beta2.orig/source/lib/util_unistr.c samba-3.0.0beta2/source/lib/util_unistr.c ---- samba-3.0.0beta2.orig/source/lib/util_unistr.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/lib/util_unistr.c 2003-07-02 23:19:02.000000000 -0500 -@@ -54,8 +54,8 @@ - if (initialised) return; - initialised = 1; - -- upcase_table = map_file(lib_path("upcase.dat"), 0x20000); -- lowcase_table = map_file(lib_path("lowcase.dat"), 0x20000); -+ upcase_table = map_file(data_path("upcase.dat"), 0x20000); -+ lowcase_table = map_file(data_path("lowcase.dat"), 0x20000); - - /* we would like Samba to limp along even if these tables are - not available */ -@@ -161,7 +161,7 @@ - return; - } - -- valid_file = map_file(lib_path("valid.dat"), 0x10000); -+ valid_file = map_file(data_path("valid.dat"), 0x10000); - if (valid_file) { - valid_table = valid_file; - mapped_file = 1; -diff -uNr samba-3.0.0beta2.orig/source/libsmb/samlogon_cache.c samba-3.0.0beta2/source/libsmb/samlogon_cache.c ---- samba-3.0.0beta2.orig/source/libsmb/samlogon_cache.c 2003-07-01 09:40:37.000000000 -0500 -+++ samba-3.0.0beta2/source/libsmb/samlogon_cache.c 2003-07-02 23:19:02.000000000 -0500 -@@ -34,7 +34,7 @@ - BOOL netsamlogon_cache_init(void) - { - if (!netsamlogon_tdb) { -- netsamlogon_tdb = tdb_open_log(lock_path(NETSAMLOGON_TDB), 0, -+ netsamlogon_tdb = tdb_open_log(cache_path(NETSAMLOGON_TDB), 0, - TDB_DEFAULT, O_RDWR | O_CREAT, 0600); - } - -@@ -67,7 +67,7 @@ - winbindd_cache.tdb open. Open the tdb if a NULL is passed. */ - - if (!tdb) { -- tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_DEFAULT, O_RDWR, 0600); - if (!tdb) { - DEBUG(5, ("netsamlogon_clear_cached_user: failed to open cache\n")); ---- samba_3_0/source/nmbd/nmbd_serverlistdb.c.orig 2003-09-08 10:53:13.000000000 -0400 -+++ samba_3_0/source/nmbd/nmbd_serverlistdb.c 2003-09-08 11:22:03.000000000 -0400 -@@ -327,7 +327,7 @@ - - updatecount++; - -- pstrcpy(fname,lp_lockdir()); -+ pstrcpy(fname,dyn_CACHEDIR()); - trim_char(fname,'\0' ,'/'); - pstrcat(fname,"/"); - pstrcat(fname,SERVER_LIST); ---- samba-3.0.0rc2/source/nmbd/nmbd_winsserver.c.orig 2003-08-28 17:42:44.000000000 -0400 -+++ samba-3.0.0rc2/source/nmbd/nmbd_winsserver.c 2003-08-31 08:09:11.000000000 -0400 -@@ -228,7 +228,7 @@ - - add_samba_names_to_subnet(wins_server_subnet); - -- if((fp = x_fopen(lock_path(WINS_LIST),O_RDONLY,0)) == NULL) { -+ if((fp = x_fopen(state_path(WINS_LIST),O_RDONLY,0)) == NULL) { - DEBUG(2,("initialise_wins: Can't open wins database file %s. Error was %s\n", - WINS_LIST, strerror(errno) )); - return True; -@@ -1759,7 +1759,7 @@ - } - } - -- slprintf(fname,sizeof(fname)-1,"%s/%s", lp_lockdir(), WINS_LIST); -+ slprintf(fname,sizeof(fname)-1,"%s/%s", dyn_STATEDIR(), WINS_LIST); - all_string_sub(fname,"//", "/", 0); - slprintf(fnamenew,sizeof(fnamenew)-1,"%s.%u", fname, (unsigned int)sys_getpid()); - -diff -uNr samba-3.0.0beta2.orig/source/nsswitch/winbindd_cache.c samba-3.0.0beta2/source/nsswitch/winbindd_cache.c ---- samba-3.0.0beta2.orig/source/nsswitch/winbindd_cache.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/nsswitch/winbindd_cache.c 2003-07-02 23:19:02.000000000 -0500 -@@ -56,7 +56,7 @@ - if (opt_nocache) - return; - -- wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, -+ wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, - TDB_CLEAR_IF_FIRST, O_RDWR|O_CREAT, 0600); - - if (!wcache->tdb) { -diff -uNr samba-3.0.0beta2.orig/source/nsswitch/winbindd_util.c samba-3.0.0beta2/source/nsswitch/winbindd_util.c ---- samba-3.0.0beta2.orig/source/nsswitch/winbindd_util.c 2003-07-01 15:44:25.000000000 -0500 -+++ samba-3.0.0beta2/source/nsswitch/winbindd_util.c 2003-07-02 23:19:02.000000000 -0500 -@@ -813,7 +813,7 @@ - SMB_STRUCT_STAT stbuf; - TDB_CONTEXT *idmap_tdb; - -- pstrcpy(idmap_name, lock_path("winbindd_idmap.tdb")); -+ pstrcpy(idmap_name, state_path("winbindd_idmap.tdb")); - - if (!file_exist(idmap_name, &stbuf)) { - /* nothing to convert return */ -diff -uNr samba-3.0.0beta2.orig/source/param/loadparm.c samba-3.0.0beta2/source/param/loadparm.c ---- samba-3.0.0beta2.orig/source/param/loadparm.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/param/loadparm.c 2003-07-02 23:19:02.000000000 -0500 -@@ -104,6 +104,9 @@ - char *szAddPrinterCommand; - char *szDeletePrinterCommand; - char *szOs2DriverMap; -+#ifdef FHS_COMPATIBLE -+ char *szLockDirStub; -+#endif - char *szLockDir; - char *szPidDir; - char *szRootdir; -@@ -1083,8 +1083,13 @@ - {"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE}, - {"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, - {"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, -+#ifdef FHS_COMPATIBLE -+ {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+ {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, -+#else - {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_ADVANCED}, - {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_HIDE}, -+#endif - {"pid directory", P_STRING, P_GLOBAL, &Globals.szPidDir, NULL, NULL, FLAG_ADVANCED}, - #ifdef WITH_UTMP - {"utmp directory", P_STRING, P_GLOBAL, &Globals.szUtmpDir, NULL, NULL, FLAG_ADVANCED}, -diff -uNr samba-3.0.0beta2.orig/source/passdb/pdb_tdb.c samba-3.0.0beta2/source/passdb/pdb_tdb.c ---- samba-3.0.0beta2.orig/source/passdb/pdb_tdb.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/passdb/pdb_tdb.c 2003-07-02 23:19:02.000000000 -0500 -@@ -501,10 +501,7 @@ - if (location) { - tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, location); - } else { -- pstring tdbfile; -- get_private_directory(tdbfile); -- pstrcat(tdbfile, "/"); -- pstrcat(tdbfile, PASSDB_FILE_NAME); -+ char *tdbfile = state_path(PASSDB_FILE_NAME); - tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, tdbfile); - } - -diff -uNr samba-3.0.0beta2.orig/source/passdb/secrets.c samba-3.0.0beta2/source/passdb/secrets.c ---- samba-3.0.0beta2.orig/source/passdb/secrets.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/passdb/secrets.c 2003-07-02 23:19:02.000000000 -0500 -@@ -37,8 +37,7 @@ - if (tdb) - return True; - -- pstrcpy(fname, lp_private_dir()); -- pstrcat(fname,"/secrets.tdb"); -+ pstrcpy(fname, state_path("secrets.tdb")); - - tdb = tdb_open_log(fname, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - -diff -uNr samba-3.0.0beta2.orig/source/printing/nt_printing.c samba-3.0.0beta2/source/printing/nt_printing.c ---- samba-3.0.0beta2.orig/source/printing/nt_printing.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/printing/nt_printing.c 2003-07-02 23:19:02.000000000 -0500 -@@ -293,28 +293,28 @@ - - if (tdb_drivers) - tdb_close(tdb_drivers); -- tdb_drivers = tdb_open_log(lock_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_drivers = tdb_open_log(state_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_drivers) { - DEBUG(0,("nt_printing_init: Failed to open nt drivers database %s (%s)\n", -- lock_path("ntdrivers.tdb"), strerror(errno) )); -+ state_path("ntdrivers.tdb"), strerror(errno) )); - return False; - } - - if (tdb_printers) - tdb_close(tdb_printers); -- tdb_printers = tdb_open_log(lock_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_printers = tdb_open_log(state_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_printers) { - DEBUG(0,("nt_printing_init: Failed to open nt printers database %s (%s)\n", -- lock_path("ntprinters.tdb"), strerror(errno) )); -+ state_path("ntprinters.tdb"), strerror(errno) )); - return False; - } - - if (tdb_forms) - tdb_close(tdb_forms); -- tdb_forms = tdb_open_log(lock_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_forms = tdb_open_log(state_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!tdb_forms) { - DEBUG(0,("nt_printing_init: Failed to open nt forms database %s (%s)\n", -- lock_path("ntforms.tdb"), strerror(errno) )); -+ state_path("ntforms.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.0beta2.orig/source/printing/printing.c samba-3.0.0beta2/source/printing/printing.c ---- samba-3.0.0beta2.orig/source/printing/printing.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/printing/printing.c 2003-07-02 23:19:02.000000000 -0500 -@@ -174,8 +174,8 @@ - if (local_pid == sys_getpid()) - return True; - -- unlink(lock_path("printing.tdb")); -- pstrcpy(printing_path,lock_path("printing")); -+ unlink(cache_path("printing.tdb")); -+ pstrcpy(printing_path,cache_path("printing")); - mkdir(printing_path,0755); - - local_pid = sys_getpid(); -diff -uNr samba-3.0.0beta2.orig/source/printing/printing_db.c samba-3.0.0beta2/source/printing/printing_db.c ---- samba-3.0.0beta2.orig/source/printing/printing_db.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/printing/printing_db.c 2003-07-02 23:19:02.000000000 -0500 -@@ -86,7 +86,7 @@ - DLIST_ADD(print_db_head, p); - } - -- pstrcpy(printdb_path, lock_path("printing/")); -+ pstrcpy(printdb_path, cache_path("printing/")); - pstrcat(printdb_path, printername); - pstrcat(printdb_path, ".tdb"); - -diff -uNr samba-3.0.20b.orig/source/registry/reg_db.c samba-3.0.20b/source/registry/reg_db.c ---- samba-3.0.20b.orig/source/registry/reg_db.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.20b/source/registry/reg_db.c 2003-07-02 23:19:02.000000000 -0500 -@@ -198,13 +198,13 @@ - if ( tdb_reg ) - return True; - -- if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) -+ if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) - { -- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if ( !tdb_reg ) { - DEBUG(0,("init_registry: Failed to open registry %s (%s)\n", -- lock_path("registry.tdb"), strerror(errno) )); -+ state_path("registry.tdb"), strerror(errno) )); - return False; - } - - DEBUG(10,("init_registry: Successfully created registry tdb\n")); -diff -uNr samba-3.0.0beta2.orig/source/rpc_server/srv_srvsvc_nt.c samba-3.0.0beta2/source/rpc_server/srv_srvsvc_nt.c ---- samba-3.0.0beta2.orig/source/rpc_server/srv_srvsvc_nt.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/rpc_server/srv_srvsvc_nt.c 2003-07-02 23:19:02.000000000 -0500 -@@ -133,10 +133,10 @@ - - if (share_tdb && local_pid == sys_getpid()) - return True; -- share_tdb = tdb_open_log(lock_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); -+ share_tdb = tdb_open_log(state_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if (!share_tdb) { - DEBUG(0,("Failed to open share info database %s (%s)\n", -- lock_path("share_info.tdb"), strerror(errno) )); -+ state_path("share_info.tdb"), strerror(errno) )); - return False; - } - -diff -uNr samba-3.0.0beta2.orig/source/sam/idmap_tdb.c samba-3.0.0beta2/source/sam/idmap_tdb.c ---- samba-3.0.0beta2.orig/source/sam/idmap_tdb.c 2003-07-01 15:44:26.000000000 -0500 -+++ samba-3.0.0beta2/source/sam/idmap_tdb.c 2003-07-02 23:19:02.000000000 -0500 -@@ -487,7 +487,7 @@ - BOOL tdb_is_new = False; - - /* use the old database if present */ -- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); -+ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); - if (!tdbfile) { - DEBUG(0, ("idmap_init: out of memory!\n")); - return NT_STATUS_NO_MEMORY; -diff -uNr samba-3.0.0beta2.orig/source/smbd/lanman.c samba-3.0.0beta2/source/smbd/lanman.c ---- samba-3.0.0beta2.orig/source/smbd/lanman.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/smbd/lanman.c 2003-07-02 23:19:02.000000000 -0500 -@@ -966,9 +966,9 @@ - BOOL local_list_only; - int i; - -- lines = file_lines_load(lock_path(SERVER_LIST), NULL); -+ lines = file_lines_load(cache_path(SERVER_LIST), NULL); - if (!lines) { -- DEBUG(4,("Can't open %s - %s\n",lock_path(SERVER_LIST),strerror(errno))); -+ DEBUG(4,("Can't open %s - %s\n",cache_path(SERVER_LIST),strerror(errno))); - return(0); - } - -diff -uNr samba-3.0.0beta2.orig/source/wrepld/process.c samba-3.0.0beta2/source/wrepld/process.c ---- samba-3.0.0beta2.orig/source/wrepld/process.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/wrepld/process.c 2003-07-02 23:19:02.000000000 -0500 -@@ -197,7 +197,7 @@ - { - TDB_CONTEXT *tdb; - -- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); -+ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); - if (!tdb) { - DEBUG(2,("get_our_last_id: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); - return; -@@ -489,7 +489,7 @@ - } - - -- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); -+ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); - if (!tdb) { - DEBUG(2,("send_entry_request: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); - return; diff --git a/packaging/Debian/debian-woody/patches/installswat.sh.patch b/packaging/Debian/debian-woody/patches/installswat.sh.patch deleted file mode 100644 index 8bd120257e..0000000000 --- a/packaging/Debian/debian-woody/patches/installswat.sh.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- samba-3.0.1/source/script/installswat.sh.orig Fri Dec 19 14:49:40 2003 -+++ samba-3.0.1/source/script/installswat.sh Fri Dec 19 14:48:49 2003 -@@ -9,7 +9,7 @@ - echo Installing the Samba Web Administration Tool - - LANGS=". `cd $SRCDIR../swat/; /bin/echo lang/??`" --echo Installing langs are `cd $SRCDIR../swat/lang/; /bin/echo ??` -+echo Installing the following additional langs: `cd $SRCDIR../swat/lang/; /bin/echo ??` - - for ln in $LANGS; do - SWATLANGDIR=$SWATDIR/$ln -@@ -23,11 +23,8 @@ - fi - fi - done --done -- --# Install images --for ln in $LANGS; do - -+ # Install images - for f in $SRCDIR../swat/$ln/images/*.gif; do - if [ ! -f $f ] ; then - continue -@@ -38,8 +35,7 @@ - chmod 0644 $FNAME - done - -- # Install html help -- -+ # Install html hel - for f in $SRCDIR../swat/$ln/help/*.html; do - if [ ! -f $f ] ; then - continue -@@ -58,7 +54,6 @@ - done - - # Install "server-side" includes -- - for f in $SRCDIR../swat/$ln/include/*.html; do - if [ ! -f $f ] ; then - continue -@@ -78,7 +73,7 @@ - for f in $SRCDIR../docs/htmldocs/*.html; do - FNAME=$SWATDIR/help/`basename $f` - echo $FNAME -- cp $f $FNAME || echo Cannot install $FNAME. Does $USER have privileges? -+ ln -s ../../../doc/samba-doc/htmldocs/`basename $f` $FNAME || echo Cannot install $FNAME. Does $USER have privileges? - chmod 0644 $FNAME - done - fi diff --git a/packaging/Debian/debian-woody/patches/nmbd-signalling.patch b/packaging/Debian/debian-woody/patches/nmbd-signalling.patch deleted file mode 100644 index ca04cce3bf..0000000000 --- a/packaging/Debian/debian-woody/patches/nmbd-signalling.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c ---- samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c 2002-11-26 20:54:19.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c 2002-12-16 23:34:13.000000000 -0600 -@@ -214,12 +214,16 @@ - extern struct in_addr loopback_ip; - - if(num_interfaces == 0) { -+ void (*old_handler)(int); -+ - DEBUG(0,("create_subnets: No local interfaces !\n")); - DEBUG(0,("create_subnets: Waiting for an interface to appear ...\n")); -+ old_handler = CatchSignal( SIGTERM, SIGNAL_CAST SIG_DFL ); - while (iface_count() == 0) { - sleep(5); - load_interfaces(); - } -+ CatchSignal( SIGTERM, SIGNAL_CAST old_handler ); - } - - num_interfaces = iface_count(); diff --git a/packaging/Debian/debian-woody/patches/samba.patch b/packaging/Debian/debian-woody/patches/samba.patch deleted file mode 100644 index dd1303ad90..0000000000 --- a/packaging/Debian/debian-woody/patches/samba.patch +++ /dev/null @@ -1,65 +0,0 @@ -diff -uNr samba-3.0.0beta1.orig/source/client/smbmount.c samba-3.0.0beta1/source/client/smbmount.c ---- samba-3.0.0beta1.orig/source/client/smbmount.c 2003-06-07 12:57:32.000000000 -0500 -+++ samba-3.0.0beta1/source/client/smbmount.c 2003-06-30 20:12:22.000000000 -0500 -@@ -765,7 +765,7 @@ - *lp = 0; - pstrcpy(password,lp+1); - got_pass = True; -- memset(strchr_m(opteq+1,'%')+1,'X',strlen(password)); -+ memset(strchr_m(opteq+1,'%')+1,'\0',strlen(password)); - } - if ((lp=strchr_m(username,'/'))) { - *lp = 0; -@@ -775,7 +775,7 @@ - !strcmp(opts, "password")) { - pstrcpy(password,opteq+1); - got_pass = True; -- memset(opteq+1,'X',strlen(password)); -+ memset(opteq+1,'\0',strlen(password)); - } else if(!strcmp(opts, "credentials")) { - pstrcpy(credentials,opteq+1); - } else if(!strcmp(opts, "netbiosname")) { -@@ -889,7 +901,7 @@ - *p = 0; - pstrcpy(password,p+1); - got_pass = True; -- memset(strchr_m(getenv("USER"),'%')+1,'X',strlen(password)); -+ memset(strchr_m(getenv("USER"),'%')+1,'\0',strlen(password)); - } - strupper_m(username); - } -diff -uNr samba-3.0.0beta1.orig/source/script/installbin.sh samba-3.0.0beta1/source/script/installbin.sh ---- samba-3.0.0beta1.orig/source/script/installbin.sh 2002-04-22 13:16:20.000000000 -0500 -+++ samba-3.0.0beta1/source/script/installbin.sh 2003-06-30 20:12:22.000000000 -0500 -@@ -22,12 +22,14 @@ - chmod $INSTALLPERMS $BINDIR/$p2 - - # this is a special case, mount needs this in a specific location -- if [ $p2 = smbmount ]; then -- if [ ! -d $DESTDIR/sbin ]; then -- mkdir $DESTDIR/sbin -- fi -- ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs -- fi -+# Commented out for the Debian Samba package. We take care of this -+# important symlink in debian/rules. (peloy@debian.org) -+# if [ $p2 = smbmount ]; then -+# if [ ! -d $DESTDIR/sbin ]; then -+# mkdir $DESTDIR/sbin -+# fi -+# ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs -+# fi - done - - -diff -uNr samba-3.0.0beta1.orig/source/web/diagnose.c samba-3.0.0beta1/source/web/diagnose.c ---- samba-3.0.0beta1.orig/source/web/diagnose.c 2003-06-07 12:57:41.000000000 -0500 -+++ samba-3.0.0beta1/source/web/diagnose.c 2003-06-30 20:12:22.000000000 -0500 -@@ -70,6 +70,7 @@ - static struct cli_state cli; - extern struct in_addr loopback_ip; - -+ loopback_ip.s_addr = htonl((127 << 24) + 1); - if (!cli_initialise(&cli)) - return False; - diff --git a/packaging/Debian/debian-woody/patches/smbclient-pager.patch b/packaging/Debian/debian-woody/patches/smbclient-pager.patch deleted file mode 100644 index 3ee85d4118..0000000000 --- a/packaging/Debian/debian-woody/patches/smbclient-pager.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -uNr samba-2.999+3.0cvs20020906.orig/source/include/local.h samba-2.999+3.0cvs20020906/source/include/local.h ---- samba-2.999+3.0cvs20020906.orig/source/include/local.h 2002-09-04 14:13:06.000000000 -0500 -+++ samba-2.999+3.0cvs20020906/source/include/local.h 2002-09-08 14:19:24.000000000 -0500 -@@ -109,7 +109,7 @@ - /* the default pager to use for the client "more" command. Users can - override this with the PAGER environment variable */ - #ifndef PAGER --#define PAGER "more" -+#define PAGER "/usr/bin/pager" - #endif - - /* the size of the uid cache used to reduce valid user checks */ diff --git a/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused b/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused deleted file mode 100644 index e2a4c3ce2c..0000000000 --- a/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused +++ /dev/null @@ -1,43 +0,0 @@ -diff -uNr samba-3.0.0beta2.orig/source/client/client.c samba-3.0.0beta2/source/client/client.c ---- samba-3.0.0beta2.orig/source/client/client.c 2003-07-01 22:36:24.000000000 -0500 -+++ samba-3.0.0beta2/source/client/client.c 2003-07-06 15:17:36.000000000 -0500 -@@ -2773,6 +2773,7 @@ - int opt; - pstring query_host; - BOOL message = False; -+ char* tar_args = NULL; - extern char tar_type; - pstring term_code; - static const char *new_name_resolve_order = NULL; -@@ -2816,7 +2817,7 @@ - max_protocol = interpret_protocol(poptGetOptArg(pc), max_protocol); - break; - case 'T': -- if (!tar_parseargs(argc, argv, poptGetOptArg(pc), optind)) { -+ if (!(tar_args = poptGetOptArg(pc))) { - poptPrintUsage(pc, stderr, 0); - exit(1); - } -@@ -2917,6 +2917,22 @@ - pstrcpy(cmdline_auth_info.password,poptGetArg(pc)); - } - -+ /* The tar command may take a number of string options; pass -+ everything we have left to tar_parseargs(). */ -+ if (tar_args) { -+ const char **argv2 = poptGetArgs(pc); -+ int argc2 = 0; -+ -+ if (argv2) { -+ while (argv2[argc2]) argc2++; -+ } -+ -+ if (!tar_parseargs(argc2, argv2, tar_args, 0)) { -+ poptPrintUsage(pc, stderr, 0); -+ exit(1); -+ } -+ } -+ - init_names(); - - if(new_name_resolve_order) diff --git a/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch b/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch deleted file mode 100644 index dac999dd63..0000000000 --- a/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch +++ /dev/null @@ -1,15 +0,0 @@ -diff -ur samba-2.2.4.orig/source/client/smbmnt.c samba-2.2.4/source/client/smbmnt.c ---- samba-2.2.4.orig/source/client/smbmnt.c Sun Apr 8 15:22:51 2001 -+++ samba-2.2.4/source/client/smbmnt.c Sun May 5 16:42:29 2002 -@@ -259,7 +259,10 @@ - ment.mnt_fsname = share_name ? share_name : "none"; - ment.mnt_dir = mount_point; - ment.mnt_type = "smbfs"; -- ment.mnt_opts = ""; -+ if (mount_ro) -+ ment.mnt_opts = "ro"; -+ else -+ ment.mnt_opts = "rw"; - ment.mnt_freq = 0; - ment.mnt_passno= 0; - diff --git a/packaging/Debian/debian-woody/patches/smbmount-nomtab.patch b/packaging/Debian/debian-woody/patches/smbmount-nomtab.patch deleted file mode 100644 index 8807148170..0000000000 --- a/packaging/Debian/debian-woody/patches/smbmount-nomtab.patch +++ /dev/null @@ -1,160 +0,0 @@ -diff -uNr samba-3.0alpha22.orig/source/client/smbmnt.c samba-3.0alpha22/source/client/smbmnt.c ---- samba-3.0alpha22.orig/source/client/smbmnt.c 2003-03-15 12:11:39.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmnt.c 2003-03-15 12:11:49.000000000 -0600 -@@ -28,6 +28,7 @@ - static uid_t mount_uid; - static gid_t mount_gid; - static int mount_ro; -+static int no_mtab; - static unsigned mount_fmask; - static unsigned mount_dmask; - static int user_mount; -@@ -40,6 +41,7 @@ - printf("Usage: smbmnt mount-point [options]\n"); - printf("Version %s\n\n",VERSION); - printf("-s share share name on server\n" -+ "-n don't update /etc/mtab\n" - "-r mount read-only\n" - "-u uid mount as uid\n" - "-g gid mount as gid\n" -@@ -54,7 +56,7 @@ - { - int opt; - -- while ((opt = getopt (argc, argv, "s:u:g:rf:d:o:")) != EOF) -+ while ((opt = getopt (argc, argv, "s:u:g:nrf:d:o:")) != EOF) - { - switch (opt) - { -@@ -71,6 +73,9 @@ - mount_gid = strtol(optarg, NULL, 0); - } - break; -+ case 'n': -+ no_mtab = 1; -+ break; - case 'r': - mount_ro = 1; - break; -@@ -274,36 +279,38 @@ - return -1; - } - -- if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -- { -- fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -- return 1; -- } -- close(fd); -+ if (!no_mtab) { -+ if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) -+ { -+ fprintf(stderr, "Can't get "MOUNTED"~ lock file"); -+ return 1; -+ } -+ close(fd); - -- if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -- { -- fprintf(stderr, "Can't open " MOUNTED); -- return 1; -- } -+ if ((mtab = setmntent(MOUNTED, "a+")) == NULL) -+ { -+ fprintf(stderr, "Can't open " MOUNTED); -+ return 1; -+ } - -- if (addmntent(mtab, &ment) == 1) -- { -- fprintf(stderr, "Can't write mount entry"); -- return 1; -- } -- if (fchmod(fileno(mtab), 0644) == -1) -- { -- fprintf(stderr, "Can't set perms on "MOUNTED); -- return 1; -- } -- endmntent(mtab); -+ if (addmntent(mtab, &ment) == 1) -+ { -+ fprintf(stderr, "Can't write mount entry"); -+ return 1; -+ } -+ if (fchmod(fileno(mtab), 0644) == -1) -+ { -+ fprintf(stderr, "Can't set perms on "MOUNTED); -+ return 1; -+ } -+ endmntent(mtab); - -- if (unlink(MOUNTED"~") == -1) -- { -- fprintf(stderr, "Can't remove "MOUNTED"~"); -- return 1; -- } -+ if (unlink(MOUNTED"~") == -1) -+ { -+ fprintf(stderr, "Can't remove "MOUNTED"~"); -+ return 1; -+ } -+ } - - return 0; - } -diff -uNr samba-3.0alpha22.orig/source/client/smbmount.c samba-3.0alpha22/source/client/smbmount.c ---- samba-3.0alpha22.orig/source/client/smbmount.c 2003-03-15 12:04:29.000000000 -0600 -+++ samba-3.0alpha22/source/client/smbmount.c 2003-03-15 12:15:10.000000000 -0600 -@@ -48,6 +48,7 @@ - static int mount_ro; - static unsigned mount_fmask; - static unsigned mount_dmask; -+static BOOL no_mtab = False; - static BOOL use_kerberos; - /* TODO: Add code to detect smbfs version in kernel */ - static BOOL status32_smbfs = False; -@@ -273,6 +274,9 @@ - return; - } - -+ if (no_mtab) -+ return; -+ - if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) { - DEBUG(0,("%d: Can't get "MOUNTED"~ lock file", sys_getpid())); - return; -@@ -466,6 +470,9 @@ - args[i++] = "-s"; - args[i++] = svc2; - -+ if (no_mtab) { -+ args[i++] = "-n"; -+ } - if (mount_ro) { - args[i++] = "-r"; - } -@@ -661,7 +668,7 @@ - ****************************************************************************/ - static void usage(void) - { -- printf("Usage: mount.smbfs service mountpoint [-o options,...]\n"); -+ printf("Usage: mount.smbfs service mountpoint [-n] [-o options,...]\n"); - - printf("Version %s\n\n",VERSION); - -@@ -739,8 +746,13 @@ - argc -= 2; - argv += 2; - -- opt = getopt(argc, argv, "o:"); -- if(opt != 'o') { -+ opt = getopt(argc, argv, "no:"); -+ if (opt == 'n') { -+ DEBUG(3,("No mtab!\n")); -+ no_mtab = True; -+ opt = getopt(argc, argv, "o:"); -+ } -+ if (opt != 'o') { - return; - } - diff --git a/packaging/Debian/debian-woody/patches/smbstatus-locking.patch b/packaging/Debian/debian-woody/patches/smbstatus-locking.patch deleted file mode 100644 index d37896a369..0000000000 --- a/packaging/Debian/debian-woody/patches/smbstatus-locking.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -uNr samba-2.999+3.0.alpha21.orig/source/utils/status.c samba-2.999+3.0.alpha21/source/utils/status.c ---- samba-2.999+3.0.alpha21.orig/source/utils/status.c 2002-11-26 20:54:22.000000000 -0600 -+++ samba-2.999+3.0.alpha21/source/utils/status.c 2002-12-16 23:37:14.000000000 -0600 -@@ -630,6 +630,16 @@ - if (!shares_only) { - int ret; - -+ tdb = tdb_open_log(lock_path("locking.tdb"), 0, TDB_DEFAULT, O_RDONLY, 0); -+ -+ if (!tdb) { -+ d_printf("%s not initialised\n", lock_path("locking.tdb")); -+ d_printf("This is normal if an SMB client has never connected to your server.\n"); -+ exit(0); -+ } else { -+ tdb_close(tdb); -+ } -+ - if (!locking_init(1)) { - d_printf("Can't initialise locking module - exiting\n"); - exit(1); diff --git a/packaging/Debian/debian-woody/patches/version-fix-vscan.patch b/packaging/Debian/debian-woody/patches/version-fix-vscan.patch deleted file mode 100644 index 0f35598297..0000000000 --- a/packaging/Debian/debian-woody/patches/version-fix-vscan.patch +++ /dev/null @@ -1,37 +0,0 @@ -Author: Lars Mueller <lmuelle at SuSE dot de> -Subject: Non integer SAMBA_VERSION_RELEASE breaks samba-vscan build -Bugzilla: bugzilla.Samba.org #2618 - ---- samba-3.0.20b/source/script/mkversion.sh -+++ samba-3.0.20b/source/script/mkversion.sh 2005-10-22 12:56:30 -@@ -17,6 +17,7 @@ - SAMBA_VERSION_MAJOR=`sed -n 's/^SAMBA_VERSION_MAJOR=//p' $SOURCE_DIR$VERSION_FILE` - SAMBA_VERSION_MINOR=`sed -n 's/^SAMBA_VERSION_MINOR=//p' $SOURCE_DIR$VERSION_FILE` - SAMBA_VERSION_RELEASE=`sed -n 's/^SAMBA_VERSION_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` -+SAMBA_VERSION_RELEASE_SUFFIX=`sed -n 's/^SAMBA_VERSION_RELEASE_SUFFIX=//p' $SOURCE_DIR$VERSION_FILE` - - SAMBA_VERSION_PRE_RELEASE=`sed -n 's/^SAMBA_VERSION_PRE_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` - -@@ -31,9 +32,10 @@ - echo "#define SAMBA_VERSION_MAJOR ${SAMBA_VERSION_MAJOR}" >> $OUTPUT_FILE - echo "#define SAMBA_VERSION_MINOR ${SAMBA_VERSION_MINOR}" >> $OUTPUT_FILE - echo "#define SAMBA_VERSION_RELEASE ${SAMBA_VERSION_RELEASE}" >> $OUTPUT_FILE -+echo "#define SAMBA_VERSION_RELEASE_SUFFIX ${SAMBA_VERSION_RELEASE_SUFFIX}" >> $OUTPUT_FILE - - --SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}" -+SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}${SAMBA_VERSION_RELEASE_SUFFIX}" - - - if test -n "${SAMBA_VERSION_PRE_RELEASE}";then ---- samba-3.0.20b/source/VERSION -+++ samba-3.0.20b/source/VERSION 2005-10-22 12:56:30 -@@ -19,7 +19,8 @@ - ######################################################## - SAMBA_VERSION_MAJOR=3 - SAMBA_VERSION_MINOR=0 - SAMBA_VERSION_RELEASE=20 -+SAMBA_VERSION_RELEASE_SUFFIX=b - - ######################################################## - # For 'pre' releases the version will be # diff --git a/packaging/Debian/debian-woody/po/POTFILES.in b/packaging/Debian/debian-woody/po/POTFILES.in deleted file mode 100644 index 95a7ea8150..0000000000 --- a/packaging/Debian/debian-woody/po/POTFILES.in +++ /dev/null @@ -1,3 +0,0 @@ -[type: gettext/rfc822deb] samba-common.templates -[type: gettext/rfc822deb] samba.templates -[type: gettext/rfc822deb] swat.templates diff --git a/packaging/Debian/debian-woody/po/es.po b/packaging/Debian/debian-woody/po/es.po deleted file mode 100644 index 0d1d1a770d..0000000000 --- a/packaging/Debian/debian-woody/po/es.po +++ /dev/null @@ -1,298 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-07-02 21:51-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Juego de caracteres para el sistema de ficheros Unix" - -# -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Actualmente hay una opción de \"character set\" en smb.conf. En Samba 3.0 " -"esta opción ha sido reemplazado por una opción nueva: \"unix charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción nueva, " -"que controla cómo Samba interpretará los nombres en el sistema de ficheros." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "Si deja en blanco este campo, no se cambiará smb.conf." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Juego de caracteres para los clientes DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Actualmente hay una opción de \"client code page\" en smb.conf. En Samba " -"3.0 esta opción ha sido reemplazado por la opción \"dos charset\". Por " -"favor, indique el juego de caracteres que desea usar para esta opción " -"nueva. Esta opción no se necesita en absoluto para clientes Windows; es " -"exclusivamente para los clientes DOS. Si deja en blanco este campo, no se " -"cambiará smb.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" -"¿Modificar smb.conf para usar la configuración WINS que proviene de DHCP?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si su sistema recibe la dirección IP desde un servidor DHCP en la red, el " -"servidor DHCP también puede proveerle informaciones sobre los servidores de " -"WINS que haya en la red. Esto requiere un cambio en el fichero smb.conf " -"para que la configuración de WINS proveniente de DHCP se lea automaticamente " -"de /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Hay que instalar el paquete dhcp3-client para aprovechar esta funcionalidad." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "¿Configurar smb.conf mediante debconf?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"El resto de la configuración de Samba trata sobre cuestiones que afectan al " -"contenido de /etc/samba/smb.conf, que es el fichero utilizado para " -"configurar los programas de Samba (nmbd y smbd). Su smb.conf actual contiene " -"una lÃnea 'include' o una opción que atraviesa más de una lÃnea, asà que " -"debconf puede dejarlo con un smb.conf descompuesto, requiriendo que lo " -"arregle a mano." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si no usa debconf para configurar smb.conf, tendrá que cuidar a mano " -"cualquier cambio a la configuración de Samba y no disfrutará de aumentos " -"periódicos de configuración. Por eso se recomienda el uso de debconf cuando " -"sea posible." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nombre del dominio o del grupo de trabajo" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Es el grupo de trabajo en el que aparecerá su servidor cuando se lo " -"pregunten los clientes de la red. Este parámetro también controla el nombre " -"de dominio que se usa con la configuración security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "¿Utilizar contraseñas cifradas?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Los clientes Windows más modernos se comunican con los servidores SMB " -"utilizando contraseñas cifradas. Si quiere usar contraseñas en texto plano, " -"tendrá que cambiar un parámetro en el registro de Windows. Es muy " -"recomendable usar cifrado en las contraseñas. Si elige hacerlo, compruebe " -"que tiene un fichero /etc/samba/smbpasswd válido y que ha puesto las " -"contraseñas con el programa smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "¿Crear el base de dados de contraseñas /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para manterner la compatibilidad con el comportamiento por defecto de la " -"mayoria de los sistemas Windows, hay que configurar Samba para que use " -"contraseñas cifradas, lo cual requiere la creación de un fichero, distinto " -"del /etc/passwd, donde se guarden las contraseñas de los usuarios. El " -"fichero se puede crear automaticamente, aunque es necesario añadir las " -"contraseñas manualmente (por usted o por el usuario) mediante el programa " -"'smbpasswd', y debe encargarse de mantener las contraseñas al dÃa. Si no " -"crea este fichero, es imprescindible configurar Samba (y posiblemente los " -"sistemas Windows) para que use contraseñas no cifradas. Véa /usr/share/doc/" -"samba-doc/htmldocs/ENCRYPTION.html del paquete samba-doc para más " -"información." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Se han cambiado de lugar los ficheros de registro de Samba." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"A partir de los primeros paquetes Debian de Samba 2.2, los ficheros de " -"registro de los dos demonios del Samba (nmbd y smbd) se encuentran en /var/" -"log/samba/. Los nombres de estos ficheros son log.nmbd y log.smbd, para " -"nmbd y smbd respectivamente." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Los ficheros de registro antiguos que habÃa en /var/log se moverán " -"automáticamente a su nueva ubicación." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "Ya no se puede ejecutar nmbd desde el inetd" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Su sistema estaba configurado anteriormente para ejectuar nmbd y smbd desde " -"inetd. A partir de la version 2.999+3.0.alpha20-4, nmbd ya no se ejecuta " -"desde inetd. Si ha modificado el script de arranque /etc/init.d/samba, " -"puede que tenga que editarlo ahora para que nmbd se ejecute." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "demonios, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "¿Cómo quiere que se ejecute Samba?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"El servicio Samba smbd puede ejecutarse como demonio normal o desde el " -"inetd. Se recomienda que se ejecute como demonio independiente." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" -"¿Convertir el fichero /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -#, fuzzy -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"La versión 3.0 de Samba introduce un nuevo base de dados \"SAM\" más " -"completo que suplanta al fichero /etc/samba/smbpasswd. ¿Quiere que el " -"fichero corriente smbpasswd sea convertido en /var/lib/samba/passdb.tdb? Si " -"pretende usar otro " - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "¡Se sobrescribirá su configuración smb.conf!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-woody/po/fr.po b/packaging/Debian/debian-woody/po/fr.po deleted file mode 100644 index 6be14c19b4..0000000000 --- a/packaging/Debian/debian-woody/po/fr.po +++ /dev/null @@ -1,301 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-07-02 21:52-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: French <debian-l10n-french@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-15\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Jeu de caractères pour les systèmes de fichiers Unix" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Une instruction « character set » (jeu de caractères) est utilisée dans " -"votre fichier smb.conf. Avec Samba 3.0, cette option est remplacée par une " -"nouvelle option, « unix charset » (jeu de caractères Unix). Veuillez " -"indiquer le jeu de caractères que vous voulez utiliser avec cette option, " -"qui permet d'interpréter les noms de fichiers sur le système." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Le fichier smb.conf ne sera pas modifié si vous laissez cette option sans " -"réponse." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Jeu de caractères pour les clients DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Votre fichier smb.conf contient une option « client code page » (page de " -"codes du client). Avec Samba 3.0, cette option a été remplacée par l'option " -"« dos charset » (jeu de caractères DOS). Veuillez indiquer le jeu de " -"caractères que vous voulez utiliser avec la nouvelle option. En général le " -"jeu de caractères choisi par défaut est suffisant. Veuillez noter que cette " -"option ne sert pas pour les clients Windows mais seulement pour les clients " -"DOS. Le fichier smb.conf ne sera pas modifié si vous laissez cette option " -"sans réponse. " - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modifier smb.conf pour utiliser les paramètres WINS fournis par DHCP ?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Si votre ordinateur obtient ses paramètres IP à partir d'un serveur DHCP du " -"réseau, ce serveur peut aussi fournir des informations sur les serveurs WINS " -"(serveurs de noms NetBIOS) présents sur le réseau. Une modification du " -"fichier smb.conf est nécessaire afin que les réglages WINS fournis par le " -"serveur DHCP soient lus dans /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "Pour cela, le paquet dhcp3-client doit être installé." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Voulez-vous configurer smb.conf avec debconf ?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"La suite de la configuration de Samba pose des questions sur des paramètres " -"de /etc/samba/smb.conf, le fichier utilisé pour configurer les programmes de " -"Samba (nmbd et smbd). Votre fichier actuel contient une ligne « include » ou " -"une option qui s'étale sur plusieurs lignes : cela peut perturber debconf et " -"il vaut mieux gérer manuellement le contenu de ce fichier." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Si vous n'utilisez pas debconf pour configurer smb.conf, vous devrez vous-" -"même gérer les modifications de configuration et vous ne pourrez pas " -"bénéficier des améliorations faites dans la configuration. Si possible, il " -"est conseillé d'utiliser debconf." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Groupe de travail et nom de domaine ?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Ce paramètre indique le groupe de travail où les clients trouveront le " -"serveur. Il indique aussi le nom de domaine utilisé par le paramètre " -"« security=domain »." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Voulez-vous chiffrer les mots de passe ?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Des clients Windows récents communiquent avec les serveurs SMB en utilisant " -"des mots de passe chiffrés. Si vous voulez utiliser des mots de passe sans " -"chiffrement, vous devez modifier un paramètre dans le registre de Windows. " -"Il est recommandé d'utiliser des mots de passe chiffrés. Si vous le faites, " -"n'oubliez pas de créer un fichier /etc/samba/smbpasswd et d'y mettre les " -"mots de passe de tous les utilisateurs qui se servent de la commande " -"smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Faut-il créer une base de données /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Pour préserver la compatibilité avec le comportement par défaut de la " -"plupart des systèmes Windows, Samba doit utiliser les mots de passe " -"chiffrés. Cela exige la création d'un fichier, distinct du fichier /etc/" -"passwd, pour mettre les mots de passe des utilisateurs. Ce fichier peut être " -"créé automatiquement, mais quelqu'un (vous ou l'utilisateur) devra ajouter " -"les mots de passe manuellement en utilisant la commande smbpasswd ; et vous " -"devrez maintenir à jour ce fichier. Si vous ne voulez pas créer le fichier " -"maintenant, Samba (et peut-être les ordinateurs Windows) devra utiliser des " -"mots de passe non chiffrés. Voyez /usr/share/doc/samba-doc/htmldocs/" -"ENCRYPTION.html dans le paquet samba-doc pour plus de détails." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Les fichiers-journaux de Samba ont changé de place." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"À partir des premiers paquets de Samba 2.2 pour Debian, les fichiers-" -"journaux des démons nmbd et smbd se trouvent dans /var/log/samba/. Les noms " -"de ces fichiers sont log.nmbd et log.smbd pour, respectivement, nmbd et smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Les anciens fichiers-journaux dans /var/log/ seront mis au bon endroit." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "L'utilisation de nmbd à partir d'inetd n'est plus supportée" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Votre système lançait nmbd et smbd à partir d'inetd. Depuis la version 2.999" -"+3.0.alpha20-4, on ne peut plus exécuter nmbd à partir d'inetd. Si vous avez " -"modifié le script de lancement /etc/init.d/samba, vous avez peut-être besoin " -"de le corriger manuellement pour permettre le lancement de nmbd. " - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "démons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Comment voulez-vous lancer Samba ?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"Le service de Samba smbd peut s'exécuter en tant que démon classique ou bien " -"être lancé par inetd. L'approche recommandée est qu'il s'exécute en tant que " -"démon." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Faut-il convertir /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Avec Samba 3.0, une nouvelle interface pour les bases de données SAM, plus " -"complète, vient remplacer le fichier /etc/samba/smbpasswd. Voulez-vous que " -"votre fichier existant soit remplacé par /var/lib/samba/passdb.tdb ? Si vous " -"envisagez d'utiliser une autre interface d'authentification (p.ex. LDAP), " -"refusez la proposition maintenant." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Ré-écriture de votre fichier smb.conf !" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT va modifier votre fichier smb.conf. Les entrées seront réorganisées et " -"les commentaires détruits ainsi que les entrées « include = » et « copy = ». " -"Si votre smb.conf était soigneusement construit, sauvegardez-le ou " -"n'utilisez pas SWAT !" diff --git a/packaging/Debian/debian-woody/po/nl.po b/packaging/Debian/debian-woody/po/nl.po deleted file mode 100644 index 61e8742dbb..0000000000 --- a/packaging/Debian/debian-woody/po/nl.po +++ /dev/null @@ -1,302 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-08-30 02:03+0100\n" -"Last-Translator: Bart Cornelis <cobaco@linux.be>\n" -"Language-Team: dutch <debian-l10n-dutch@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Karakterset voor Unix bestandsysteem" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"U heeft momenteel een \"karakterset\" ingesteld in uw smb.conf. In Samba 3.0 " -"werd deze optie vervangen door een nieuwe \"unix karakterset\" optie. " -"Gelieve de karakterset die u voor deze nieuwe optie wil gebruiken aan te " -"geven, deze bepaald hoe Samba de bestandsnamen in het bestandsysteem " -"interpreteerd." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Uw smb.conf bestand wordt niet aangepast indien u deze optie leeg laat." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Karakterset voor DOS-clients" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"U heeft momenteel een \"client code pagina\" ingesteld in uw smb.conf. In " -"Samba 3.0 werd deze optie vervangen door de optie \"dos karakterset\". " -"Gelieve de karakterset die u voor deze nieuwe optie wilt gebruiken aan te " -"geven. In de meeste gevallen zal het standaard ingevulde antwoord voldoen. " -"Merk op dat deze optie niet nodig is voor ondersteuning van Windows-clients, " -"enkel voor DOS-clients. Uw smb.conf wordt niet veranderd wanneer u deze " -"optie blank laat." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "smb.conf aanpassen om de WINS instellingen van DHCP te gebruiken?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Indien uw computer zijn ip-addres informatie van een DHCP-server op het " -"netwerk haalt, voorziet deze mogelijks ook informatie betreffende de op het " -"netwerk aanwezige WINS-servers (\"NetBIOS naam servers\").\" Dit vereist een " -"verandering aan uw smb.conf bestand, opdat de door DHCP doorgegeven WINS " -"instellingen automatisch gelezen worden van /etc/samba/dhcp.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"U dient het dhcp3-client-pakket geïnstalleert te hebben om van deze optie " -"gebruik te maken." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configuratie in smb.conf met debconf beheren?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"De resterende Samba configuratie beslaat parameters in /etc/samba/smb.conf, " -"het configuratiebestand dat gebruikt wordt voor de Samba programmas (nmbd en " -"smbd). Uw huidige smb.conf bevat een 'include' regel of een optie die " -"meerdere regels beslaat, dit kan debconf mogelijks in verwarring brenngen. " -"Indien debconf in verwarring raakt dient u uw smb.conf handmatig aan te " -"passen om samba terug werkend te krijgen." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Indien u geen gebruik maakt van debconf voor het beheer van smb.conf dient u " -"alle configuratie instellingen zelf te doen, en zult u geen voordeel halen " -"uit de periodieke configuratie verbeteringen. Het gebruik van debconf wordt " -"dan ook aangeraden. " - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Werkgroep/Domeinnaam?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Dit bepaald van welke werkgroep uw server deel zal lijken uit te maken bij " -"het beantwoorden van vragen door clients. Merk op dat deze parameter ook de " -"domeinnaam die gebruikt wordt voor de security=domein instelling bepaald." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Wachtwoord versleuteling gebruiken?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Recente Windows clients maken gebruik van versleutelde wachtwoorden voor de " -"communicatie met SMB-servers. Indien u onversleutelde tekst wachtwoorden " -"wilt gebruiken dient u een parameter te veranderen in de Windows registry. " -"Het gebruik van versleutelde wachtwoorden wordt aangeraden. Indien u dit " -"doet zorg er dan voor dat u een geldig /etc/samba/smbpasswd bestand heeft en " -"dat u de wachtwoorden daar voor elke gebruiker met behulp van smbpasswd " -"insteld. " - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Samba wachtwoord database, /var/lib/samba/passdb.tdb, aanmaken?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Om compatibel te zijn met de standaard instellingen van de meeste " -"Windowsversies dient Samba gebruik te maken van versleutelde wachtwoorden. " -"Dit vereist dat de gebruikerswachtwoorden opgeslagen worden in een bestand " -"dat verschilt van /etc/passwd. Dit bestand kan automatisch aangemaakt " -"worden, maar de wachtwoorden dienen handmatig (door de gebuiker) toegevoegt " -"te worden met het smbpasswd commando. U dient dit bestand in de toekomst ook " -"aktueel te houden. Indien u dit bestand niet aanmaakt zult u samba (en naar " -"alle waarschijnlijkheid de client machines) moeten herconfigureren zodat " -"deze onversleutelde wachtwoorden gebruiken. Zie /usr/share/doc/samba-doc/" -"htmldocs/ENCRYPTION.html uit het samba-doc pakket voor meer details." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Samba's log bestanden zijn verhuisd." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Vanaf de eerste Debian pakketten vaan Samba versie 2.2 zijn de log bestanden " -"van beide Samba daemons (nmbd en smbd) opgeslagen in /var/log/samba/. De log " -"bestanden voor nmbd en smbd zijn, respectievelijk, log.nmbd en log.smbd." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"De oude logbestanden in /var/log worden voor u naar de nieuwe locatie " -"verplaatst." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "nmbd vanuit inetd draaien wordt niet langer ondersteund" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Uw systeem was geconfigureerd om nmbd en smbd vanuit inetd te starten. Vanaf " -"versie 2.999+3.0.alpha20-4 kan nmbd niet langer door inetd gestart worden. " -"Indien u uw /etc/init.d/samba startup-script aangepast had, dient u dit " -"mogelijks aan te passen opdat nmbd zou starten." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Hoe wilt u Samba draaien?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"De Samba daemon smbd kan als een normale daemon of via inetd draaien. Als " -"een daemon is de aangeraden aanpak." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "/etc/samba/smbpasswd verplaatsen naar /var/lib/samba/passdb.tdb?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"Samba 3.0 introduceert een nieuwe, meer complete SAM databaseinterface die " -"het /etc/samba/smbpasswd bestand overstijgt. \"Wilt u dat ik uw bestaand " -"smbpasswd bestand voor u naar /var/lib/samba/passdb.tdb migreer? Indien u " -"van plan bent om, in plaats hiervan, een ander pdb-backend (e.g. LDAP) te " -"gebruiken dient u hier 'nee' te antwoorden." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Uw smb.conf wordt herschreven!" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"SWAT zal uw smb.conf bestand herschrijven. Het zal de ingangen anders " -"schikken en alle comments, include= en copy= opties verwijderen. Als u een, " -"met veel zorg, handmatig opgebouwd smb.conf bestand heeft, maak dan een " -"reservekopie of zie van het gebruik van SWAT af! " diff --git a/packaging/Debian/debian-woody/po/pt_BR.po b/packaging/Debian/debian-woody/po/pt_BR.po deleted file mode 100644 index 2af42a562b..0000000000 --- a/packaging/Debian/debian-woody/po/pt_BR.po +++ /dev/null @@ -1,308 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -msgid "" -msgstr "" -"Project-Id-Version: samba_3.0.0beta2-1\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: 2003-07-02 21:56-0500\n" -"Last-Translator: Steve Langasek <vorlon@debian.org>\n" -"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "Conjunto de caracteres para sistema de arquivos Unix" - -#. Description -#: ../samba-common.templates:3 -#, fuzzy -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" -"Atualmente existe um \"conjunto de caracteres\" (\"character set\") " -"configurado em seu arquivo smb.conf. No Samba 3.0, esta opção foi " -"substituída por uma nova opção, \"unix charset\". Por favor especifique o " -"conjunto de caracteres a ser usado para essa nova opção, a qual controla " -"como o Samba interpreta nomes de arquivos no sistema de arquivos." - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" -"Caso você deixe esta opção em branco, seu arquivo smb.conf não será " -"modificado." - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "Conjunto de caracteres para clientes DOS" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" -"Atualmente existe um \"código de página do cliente\" (\"client code page\") " -"definido em seu arquivo smb.conf. No Samba 3.0, essa opção foi substituída " -"pela opção \"dos charset\". Por favor, especifique o conjunto de caracteres " -"que você deseja usar para essa nova opção. Note que essa opção não é " -"necessária para suportar clientes Windows mas sim válida somente para " -"clientes DOS. Caso você deixe essa opção em branco, seu arquivo smb.conf não " -"será modificado." - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "Modificar smb.conf para usar configurações WINS fornecidas via DHCP ?" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" -"Caso seu computador obtenha as informações de endereçamento IP de um " -"servidor DHCP na rede, o servidor DHCP pode também fornecer informações " -"sobre servidor WINS (\"Servidor de Nomes NetBIOS\") presentes na rede. Para " -"o Samba ler as configurações WINS fornecidas pelo servidor DHCP " -"automaticamente do arquivo /etc/samba/dhcp.conf, é preciso modificar seu " -"arquivo smb.conf." - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" -"Você deve possuir o pacote dhcp3-client instalado para poder usar este " -"recurso." - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "Configurar smb.conf através do debconf ?" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" -"O restante da configuração do Samba lida com questões que afetam parâmetros " -"no arquivo /etc/samba/smb.conf, que é o arquivo usado para configurar os " -"programas Samba (nmbd e smbd). Seu arquivo smb.conf atual contém uma linha " -"'include' ou uma opção que ocupa diversas linhas, o que pode confundir o " -"debconf e requerer que você edite seu arquivo smb.conf manualmente para tê-" -"lo funcional novamente." - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" -"Caso você opte por não usar o debconf para configurar o smb.conf, será " -"necessário que você lide com quaisquer mudanças de configurações manualmente " -"e você não poderá aproveitar os melhoramentos periódicos de configuração. " -"Por esse motivo, é recomendado usar o debconf, caso seja possível." - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "Nome de Domínio/Grupo de Trabalho ?" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" -"Este parâmetro controla em qual grupo de trabalho (workgroup) seu servidor " -"parecerá estar quando o mesmo for pesquisado por clientes. Note que este " -"parâmetro também controla o nome de Domínio usado com a configuração " -"security=domain." - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "Usar encriptação de senhas ?" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" -"Clientes Windows atuais comunicam-se com servidores SMB usando senhas " -"encriptadas. Caso você queira usar senhas em texto puro você precisará " -"modificar um parâmetro no registro de seu Windows. É recomendado que você " -"use senhas encriptadas. Se for usá-las, certifique-se de possuir um arquivo /" -"etc/samba/smbpasswd válido e que você tenha definido senhas no mesmo para " -"cada usuário, utilizando o comando smbpasswd." - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "Gerar a base de dados para senhas /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" -"Para compatibilidade com os padrões adotados em todas as versões atuais do " -"Windows o Samba deve ser configurado para usar senhas encriptadas. Isso " -"requer que as senhas dos usuários sejam armazenadas em um arquivo diferente " -"do /etc/passwd. Esse arquivo pode ser criado automaticamente, mas as senhas " -"devem ser definidas manualmente (por você ou pelo usuário) executando o " -"utilitário smbpasswd. Você deve certificar-se de manter esse arquivo " -"atualizado futuramente. Caso você não crie esse arquivo, você terá que " -"reconfigurar o Samba (e provavelmente suas máquinas clientes) para " -"utilização de senhas em texto puro. Consulte a documentação do pacote samba-" -"doc em /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html para maiores " -"detalhes." - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "Arquivos de log do Samba foram movidos." - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" -"Desde os primeiros pacotes Debian do Samba 2.2 os arquivos de log para ambos " -"os daemons Samba (nmbd e smbd) são armazenados no diretório /var/log/samba/. " -"Os nomes desses arquivos são log.nmbd e log.smbd, para o nmbd e para o smbd, " -"respectivamente." - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" -"Os antigos arquivos de log que estavam em /var/log/ serão movidos para a " -"nova localização automaticamente para você." - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "A execução do nmbd a partir do inetd não é mais suportada" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" -"Seu sistema foi previamente configurado para iniciar os daemons nmbd e smbd " -"a partir do inetd. Desde a versão 2.999+3.0.alpha20-4, o nmbd não mais será " -"iniciado a partir do inetd. Caso você tenha modificado seu script de " -"inicialização /etc/init.d/samba, você pode precisar ajustá-lo manualmente " -"agora para que o nmbd seja iniciado." - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "daemons, inetd" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "Como você deseja que o Samba seja executado ?" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" -"O serviço Samba smbd pode ser executado como daemon normal ou a partir do " -"inetd. Executá-lo como daemon é o método recomendado." - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb ?" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" -"O Samba 3.0 introduz uma nova e mais complete interface de base de dados SAM " -"que substitui o arquivo /etc/samba/smbpasswd. Você gostaria que o arquivo " -"smbpasswd existente fosse migrado para /var/lib/samba/passdb.tdb para você ? " -"Caso você planeje usar um outro backend (como LDAP, por exemplo) você deverá " -"escolher 'não' aqui." - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "Seu arquivo smb.conf será reescrito !" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" -"O SWAT irá reescrever seu arquivo smb.conf. Ele irá rearrumar as entradas e " -"apagar todos os comentários, opções include= e copy=. Caso você possua um " -"arquivo smb.conf cuidadosamente criado e comentado, faça uma cópia de " -"segurança (backup) do mesmo ou não use o SWAT !" diff --git a/packaging/Debian/debian-woody/po/templates.pot b/packaging/Debian/debian-woody/po/templates.pot deleted file mode 100644 index 465f4719b0..0000000000 --- a/packaging/Debian/debian-woody/po/templates.pot +++ /dev/null @@ -1,233 +0,0 @@ -# -# Translators, if you are not familiar with the PO format, gettext -# documentation is worth reading, especially sections dedicated to -# this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' -# -# Some information specific to po-debconf are available at -# /usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans -# -# Developers do not need to manually edit POT or PO files. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2003-08-30 19:08-0500\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" -"Language-Team: LANGUAGE <LL@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=CHARSET\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Description -#: ../samba-common.templates:3 -msgid "Character Set for Unix filesystem" -msgstr "" - -#. Description -#: ../samba-common.templates:3 -msgid "" -"You currently have a \"character set\" configured in your smb.conf. In " -"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " -"specify the character set you wish to use for theis new option, which " -"controls how Samba interprets filenames on the file system." -msgstr "" - -#. Description -#: ../samba-common.templates:3 -msgid "If you leave this option blank, your smb.conf will not be changed." -msgstr "" - -#. Description -#: ../samba-common.templates:13 -msgid "Character Set for DOS clients" -msgstr "" - -#. Description -#: ../samba-common.templates:13 -msgid "" -"You currently have a \"client code page\" set in your smb.conf. In Samba " -"3.0, this option is replaced by the option \"dos charset\". Please specify " -"the character set you wish to use for this new option. In most cases, the " -"default chosen for you will be sufficient. Note that this option is not " -"needed to support Windows clients, it is only for DOS clients. If you leave " -"this option blank, your smb.conf will not be changed." -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "Modify smb.conf to use WINS settings from DHCP?" -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"If your computer gets IP address information from a DHCP server on the " -"network, the DHCP server may also provide information about WINS servers " -"(\"NetBIOS name servers\") present on the network. This requires a change " -"to your smb.conf file so that DHCP-provided WINS settings will automatically " -"be read from /etc/samba/dhcp.conf." -msgstr "" - -#. Description -#: ../samba-common.templates:24 -msgid "" -"You must have the dhcp3-client package installed to take advantage of this " -"feature." -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "Configure smb.conf through debconf?" -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"The rest of the configuration of Samba deals with questions that affect " -"parameters in /etc/samba/smb.conf, which is the file used to configure the " -"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " -"line or an option that spans multiple lines, which could confuse debconf and " -"require you to edit your smb.conf by hand to get it working again." -msgstr "" - -#. Description -#: ../samba-common.templates:37 -msgid "" -"If you don't use debconf to configure smb.conf, you will have to handle any " -"configuration changes yourself, and will not be able to take advantage of " -"periodic configuration enhancements. Therefore, use of debconf is " -"recommended if possible." -msgstr "" - -#. Description -#: ../samba-common.templates:52 -msgid "Workgroup/Domain Name?" -msgstr "" - -#. Description -#: ../samba-common.templates:52 -msgid "" -"This controls what workgroup your server will appear to be in when queried " -"by clients. Note that this parameter also controls the Domain name used with " -"the security=domain setting." -msgstr "" - -#. Description -#: ../samba-common.templates:60 -msgid "Use password encryption?" -msgstr "" - -#. Description -#: ../samba-common.templates:60 -msgid "" -"Recent Windows clients communicate with SMB servers using encrypted " -"passwords. If you want to use clear text passwords you will need to change a " -"parameter in your Windows registry. It is recommended that you use encrypted " -"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " -"and that you set passwords in there for each user using the smbpasswd " -"command." -msgstr "" - -#. Description -#: ../samba.templates:4 -msgid "Create samba password database, /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Description -#: ../samba.templates:4 -msgid "" -"To be compatible with the defaults in most versions of Windows, Samba must " -"be configured to use encrypted passwords. This requires user passwords to " -"be stored in a file separate from /etc/passwd. This file can be created " -"automatically, but the passwords must be added manually (by you or the user) " -"by running smbpasswd, and you must arrange to keep it up-to-date in the " -"future. If you do not create it, you will have to reconfigure samba (and " -"probably your client machines) to use plaintext passwords. See /usr/share/" -"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " -"details." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "Samba's log files have moved." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "" -"Starting with the first packages of Samba 2.2 for Debian the log files for " -"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " -"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." -msgstr "" - -#. Description -#: ../samba.templates:17 -msgid "" -"The old log files that were in /var/log/ will be moved to the new location " -"for you." -msgstr "" - -#. Description -#: ../samba.templates:28 -msgid "Running nmbd from inetd is no longer supported" -msgstr "" - -#. Description -#: ../samba.templates:28 -msgid "" -"Your system was previously configured to start nmbd and smbd from inetd. As " -"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " -"If you have modified your /etc/init.d/samba startup script, you may need to " -"adjust it by hand now so that nmbd will start." -msgstr "" - -#. Choices -#: ../samba.templates:36 -msgid "daemons, inetd" -msgstr "" - -#. Description -#: ../samba.templates:38 -msgid "How do you want to run Samba?" -msgstr "" - -#. Description -#: ../samba.templates:38 -msgid "" -"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " -"daemon is the recommended approach." -msgstr "" - -#. Description -#: ../samba.templates:45 -msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" -msgstr "" - -#. Description -#: ../samba.templates:45 -msgid "" -"Samba 3.0 introduces a newer, more complete SAM database interface which " -"supersedes the /etc/samba/smbpasswd file. Would you like your existing " -"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " -"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " -"here." -msgstr "" - -#. Description -#: ../swat.templates:3 -msgid "Your smb.conf will be re-written!" -msgstr "" - -#. Description -#: ../swat.templates:3 -msgid "" -"SWAT will rewrite your smb.conf file. It will rearrange the entries and " -"delete all comments, include= and copy= options. If you have a carefully " -"crafted smb.conf then back it up or don't use SWAT!" -msgstr "" diff --git a/packaging/Debian/debian-woody/python2.2-samba.files b/packaging/Debian/debian-woody/python2.2-samba.files deleted file mode 100644 index a24e2b98c8..0000000000 --- a/packaging/Debian/debian-woody/python2.2-samba.files +++ /dev/null @@ -1 +0,0 @@ -usr/lib/python2.2/site-packages/ diff --git a/packaging/Debian/debian-woody/rules b/packaging/Debian/debian-woody/rules deleted file mode 100755 index d97dc99bce..0000000000 --- a/packaging/Debian/debian-woody/rules +++ /dev/null @@ -1,306 +0,0 @@ -#!/usr/bin/make -f -# -# Important modifications (introduction of a saved config.cache to -# solve build problems) introduced in Samba 2.2.1a-5. These -# modification were made by Steve Langasek <vorlon@netexpress.net>. -# -# config.cache *DISABLED* to solve problems caused incorrect settings -# --SSS -# -# - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -# This is the debhelper compatability version to use. -export DH_COMPAT=4 - -# This has to be exported to make some magic below work. -export DH_OPTIONS - -# Set the host and build architectures for use with config.cache loading, -# cross-building, etc. -DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) - -export DEB_HOST_GNU_TYPE -export DEB_BUILD_GNU_TYPE - - -# Support the DEB_BUILD_OPTIONS variable -CFLAGS = -gstabs -Wall -INSTALL = install - -ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS += -O0 -else - CFLAGS += -O2 -endif - -ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) - INSTALL += -s -endif - - -DESTDIR=`pwd`/debian/tmp - -patch: patch-stamp -patch-stamp: - dh_testdir - if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi - touch patch-stamp - -unpatch: - dh_testdir - if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi - rm -f patch-stamp - -configure: patch-stamp configure-stamp -configure-stamp: - dh_testdir - -# if [ -f debian/config.cache ]; then \ -# cp -f debian/config.cache source/config.cache; \ -# fi - - [ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure \ - --host=$(DEB_HOST_GNU_TYPE) \ - --build=$(DEB_BUILD_GNU_TYPE) \ - --with-fhs \ - --enable-shared \ - --enable-static \ - --prefix=/usr \ - --sysconfdir=/etc \ - --libdir=/etc/samba \ - --with-privatedir=/etc/samba \ - --localstatedir=/var \ - --with-netatalk \ - --with-smbmount \ - --with-pam \ - --with-syslog \ - --with-utmp \ - --with-readline \ - --with-pam_smbpass \ - --with-libsmbclient \ - --with-msdfs \ - --with-automount \ - --with-acl-support \ - --with-quotas \ - --with-ldap \ - --with-python=python2.2) - - touch configure-stamp - -build: patch-stamp configure-stamp build-stamp -build-stamp: - dh_testdir - - $(MAKE) -C source headers - $(MAKE) -C source all nsswitch/libnss_wins.so python_ext - $(MAKE) -C source client/mount.cifs - - touch build-stamp - -clean: unpatch - dh_testdir - dh_testroot - rm -f build-stamp configure-stamp - - # Clean first the Samba package -# -$(MAKE) -C source realclean -# -$(MAKE) -C source clean - -$(MAKE) -C source python_clean distclean - - # Delete stuff left after a build that is not deleted by 'make clean' - rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \ - source/bin/libsmbclient.a source/include/stamp-h - - dh_clean - -install: DH_OPTIONS= -install: build - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - - mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib \ - $(DESTDIR)/lib/security $(DESTDIR)/sbin $(DESTDIR)/etc/samba \ - $(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \ - $(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \ - $(DESTDIR)/usr/lib/python2.2/site-packages - - # Add here commands to install the package into debian/tmp. - $(MAKE) -C source install DESTDIR=$(DESTDIR) - - # libsmbclient files are not installed by the standard - # 'make install' - do it manually. - $(MAKE) -C source installclientlib DESTDIR=$(DESTDIR) - mv $(DESTDIR)/usr/lib/samba/libsmbclient.so $(DESTDIR)/usr/lib/libsmbclient.so.0.1 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/libsmbclient.so.0 - ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/libsmbclient.so - mv $(DESTDIR)/usr/lib/samba/libsmbclient.a $(DESTDIR)/usr/lib/libsmbclient.a - - # Install other stuff not installed by "make install" - install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd - - # Install winbind stuff not installed by 'make install' - install -m 0644 source/nsswitch/libnss_winbind.so \ - $(DESTDIR)/lib/libnss_winbind.so.2 - install -m 0644 source/bin/pam_winbind.so \ - $(DESTDIR)/lib/security/ - - # Install libnss_wins.so, which is not installed by 'make install' either. - install -m 0644 source/nsswitch/libnss_wins.so \ - $(DESTDIR)/lib/libnss_wins.so.2 - - # pam_smbpass.so isn't being installed by 'make install'. - # We'll move it here to $(DESTDIR)/lib/security/ and then - # libpam-smbpass.files will make dh_movefiles move it to the - # right location in the libpam-smbpass package. - install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/ - - # Create the symlink that will allow us to do "mount -t smbfs ...". - # Create also a symlink that will allow "mount -t smb ..." to - # work too. The symlink is created in $(DESTDIR)/sbin/ but - # will be moved by dh_movefiles to the smbfs package later on. - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs - ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8 - ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8 - - # Install mount.cifs and its man page - install -m 0755 source/client/mount.cifs $(DESTDIR)/sbin/ - install -m 0644 docs/manpages/mount.cifs.8 $(DESTDIR)/usr/share/man/man8/ - - # For CUPS to support printing to samba printers, it's necessary - # to make the following symlink (according to - # Erich Schubert <debian@vitavonni.de> in #109509): - ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb - - # Install man pages for files without man pages in the upstream sources - install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8 - - # Delete unwanted stuff leftover from "make install" - - # The smbwrapper package is not being generated anymore, so we must - # delete the related man pages. - rm $(DESTDIR)/usr/share/man/man1/smbsh.1 - - # We're not providing findsmb (should we?) so let's remove the man - # pages. - find debian/ -name 'findsmb*' -exec rm -f {} \; - - # Install samba-common's conffiles - they'll get moved later to their - # correct place by dh_movefiles. - cp debian/smb.conf $(DESTDIR)/etc/samba/ - install -m755 debian/panic-action $(DESTDIR)/etc/samba/ - cp debian/gdbcommands $(DESTDIR)/etc/samba/ - cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba - install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba - - # Install the Python modules - # - #cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.2/site-packages/ - cp source/build/lib.linux-*-2.2/samba/*.so $(DESTDIR)/usr/lib/python2.2/site-packages/ - - dh_movefiles - -# Build architecture-independent files here. -# Pass -i to all debhelper commands in this target to reduce clutter. -binary-indep: DH_OPTIONS=-i -binary-indep: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/* -# dh_installmenu -# dh_installemacsen -# dh_installpam -# dh_installinit -# dh_installcron -# dh_installmanpages -# dh_installinfo -# dh_undocumented - dh_installchangelogs - dh_link - dh_compress - dh_fixperms - - # Get rid of those pesky .cvsignore files to make lintian happy - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_perl - dh_gencontrol - dh_md5sums - dh_builddeb - -# Build architecture-dependent files here. -# Pass -a to all debhelper commands in this target to reduce clutter. -binary-arch: DH_OPTIONS=-a -binary-arch: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdocs -A debian/README.build - # dh_installexamples is not available in Debian Potato... - [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.2-samba source/python/examples/* -# dh_installmenu - # dh_installlogrotate is not available in Debian Potato... - if [ -x /usr/bin/dh_installlogrotate ]; then \ - dh_installlogrotate; \ - else \ - mkdir -p debian/samba/etc/logrotate.d; \ - cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \ - mkdir -p debian/winbind/etc/logrotate.d; \ - cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \ - fi -# dh_installemacsen -# dh_installpam - DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19" - DH_OPTIONS= dh_installinit -pwinbind - dh_installcron -# dh_installmanpages -# dh_installinfo - cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind -# dh_undocumented - dh_installchangelogs -Nlibpam-smbpass - DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG - dh_strip - dh_link - dh_compress - dh_fixperms - - # Why this is executable, I have NO idea... - chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h - - # You may want to make some executables suid here. - # The smbmnt and smbumount binaries should be setuid-root. This - # has security implications because these programs haven't had - # a thorough security audit. smbmount _does not_ have to have - # the setuid bit set. In fact, it is a security hole. - chmod u+s debian/smbfs/usr/bin/smbmnt - chmod u+s debian/smbfs/usr/bin/smbumount - - # Set some reasonable default perms for the samba logdir. - chmod 0750 debian/samba/var/log/samba/ - chown root.adm debian/samba/var/log/samba/ - - # Get rid of those pesky .cvsignore files to make lintian happy - # (maybe we only need the "find ... -exec rm -f {} ;" we have - # in the binary-indep target?) peloy.- - find debian/ -name .cvsignore -exec rm -f {} \; - - dh_installdeb -# dh_makeshlibs -# dh_perl - dh_shlibdeps - dh_gencontrol - dh_md5sums - dh_builddeb - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install configure diff --git a/packaging/Debian/debian-woody/samba-common.config b/packaging/Debian/debian-woody/samba-common.config deleted file mode 100644 index ed76b95cb8..0000000000 --- a/packaging/Debian/debian-woody/samba-common.config +++ /dev/null @@ -1,154 +0,0 @@ -#/bin/sh -e - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# We ask the question IFF the config contains complex options that could -# cause us to break the config. -if [ -f "$FILE" ] && grep -v dhcp.conf $FILE \ - | grep -qEi '\\$|^[[:space:]]*include[[:space:]]*=' -then - db_input high samba-common/do_debconf || true - db_go -else - db_set samba-common/do_debconf true -fi - -# If user doesn't want to use debconf to configure Samba the leave... -db_get samba-common/do_debconf || true -if [ "${RET}" = "false" ]; then - exit 0 -fi - -# User wants to use debconf, let's continue... - -# Adjust priority of the question about the workgroup name depending -# on whether a workgroup name has already being specified. -db_get samba-common/workgroup || true -if [ "${RET}" ]; then - WGPRIORITY=medium -else - WGPRIORITY=high -fi - -# Preload any values from the existing smb.conf file -if [ -f $FILE ]; then - WORKGROUP=`smbconf_retr workgroup` - if [ "$WORKGROUP" ]; then - db_set samba-common/workgroup "$WORKGROUP" - fi - - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - elif [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - - db_set samba-common/encrypt_passwords "$ENCRYPT" - fi - - CHARSET=`smbconf_retr "character set"` - CODEPAGE=`smbconf_retr "client code page"` - UNIXCHARSET=`smbconf_retr "unix charset"` - DOSCHARSET=`smbconf_retr "dos charset"` - - # If we're upgrading from an old version and there's no - # 'passdb backend' setting, add one. - if [ "$1" = "configure" -a -n "$2" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 \ - && ! grep -q -i '^[[:space:]]*passdb backend[[:space:]]*=' $FILE - then - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e' - s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)encrypt passwords/\1encrypt passwords/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*encrypt passwords[[:space:]]*=/a \ - passdb backend = smbpasswd guest - }' < $FILE > ${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi -fi - -# Get workgroup name -db_input $WGPRIORITY samba-common/workgroup || true -db_go - -# Use encrypted passwords? -db_input medium samba-common/encrypt_passwords || true -db_go - -# Handle migrating character sets -if [ -n "$CHARSET" -a -z "$UNIXCHARSET" ] -then - UNIXCHARSET=`echo $CHARSET | sed -e's/iso-/ISO/i'` - db_set samba-common/character_set "$UNIXCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/character_set || true - db_go -fi - -if [ -n "$CODEPAGE" -a -z "$DOSCHARSET" ] -then - DOSCHARSET=CP`echo $CODEPAGE | sed -e's/[[:alpha:]]*//g'` - db_set samba-common/codepage "$DOSCHARSET" - # FIXME: should eventually be low. - db_input medium samba-common/codepage || true - db_go -fi - -DHCPPRIORITY=medium -#if [ "$DEBCONF_RECONFIGURE" = 1 ] && [ -f /sbin/dhclient3 ] -if [ -f /sbin/dhclient3 ] -then - DHCPPRIORITY=high -# TODO: see if we can detect that dhcp3-client is *going* to be installed, -# even if it isn't yet. -#elif dpkg-query -W --showformat='${Status}\n' dhcp3-client | grep ??? -# unknown ok not-installed ? -# DHCPPRIORITY=high -fi - -if [ ! -f $FILE ] || grep -q -i 'wins server' $FILE -then - # check the values before and after; unset the 'applied' flag - # if they don't match. - db_get samba-common/dhcp || true - OLDDHCP="$RET" - db_input $DHCPPRIORITY samba-common/dhcp || true - db_go - db_get samba-common/dhcp || true - if [ "$OLDDHCP" != "$RET" ]; then - db_fset samba-common/dhcp applied false - fi -fi diff --git a/packaging/Debian/debian-woody/samba-common.dhcp b/packaging/Debian/debian-woody/samba-common.dhcp deleted file mode 100644 index 3b2fa4ba19..0000000000 --- a/packaging/Debian/debian-woody/samba-common.dhcp +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh - -netbios_setup() { - # No need to continue if we're called with an unsupported option - - if [ "$reason" != BOUND ] && [ "$reason" != RENEW ] \ - && [ "$reason" != REBIND ] && [ "$reason" != REBOOT ] \ - && [ "$reason" != EXPIRE ] && [ "$reason" != FAIL ] - then - return - fi - - umask 022 - - if [ -z "$new_netbios_name_servers" ] || [ "$reason" = FAIL ] \ - || [ "$reason" = EXPIRE ] - then - # FIXME: add sed magic to only remove wins servers - # associated with this interface - echo -n > /etc/samba/dhcp.conf - elif [ "$new_netbios_name_servers" != "$old_netbios_name_servers" ] - then - local serverlist="" - for server in $new_netbios_name_servers - do - serverlist="$serverlist $interface:$server" - done - # FIXME: add sed magic to only update wins servers - # associated with this interface - echo " wins server =$serverlist" > /etc/samba/dhcp.conf - fi -} - -netbios_setup diff --git a/packaging/Debian/debian-woody/samba-common.dirs b/packaging/Debian/debian-woody/samba-common.dirs deleted file mode 100644 index c089ad7357..0000000000 --- a/packaging/Debian/debian-woody/samba-common.dirs +++ /dev/null @@ -1,2 +0,0 @@ -etc/samba -etc/dhcp3/dhclient-enter-hooks.d diff --git a/packaging/Debian/debian-woody/samba-common.files b/packaging/Debian/debian-woody/samba-common.files deleted file mode 100644 index 0b6baff5f1..0000000000 --- a/packaging/Debian/debian-woody/samba-common.files +++ /dev/null @@ -1,19 +0,0 @@ -etc/samba/gdbcommands -etc/samba/panic-action -etc/samba/smb.conf -etc/dhcp3/ -etc/pam.d/ -usr/bin/net -usr/bin/nmblookup -usr/bin/smbpasswd -usr/bin/testparm -usr/share/man/man1/nmblookup.1 -usr/share/man/man1/testparm.1 -usr/share/man/man5/lmhosts.5 -usr/share/man/man5/smb.conf.5 -usr/share/man/man7/samba.7 -usr/share/man/man8/net.8 -usr/share/man/man8/smbpasswd.8 -usr/share/samba/lowcase.dat -usr/share/samba/upcase.dat -usr/share/samba/valid.dat diff --git a/packaging/Debian/debian-woody/samba-common.postinst b/packaging/Debian/debian-woody/samba-common.postinst deleted file mode 100644 index 6c6eb9bf53..0000000000 --- a/packaging/Debian/debian-woody/samba-common.postinst +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# -# - -set -e - -# Do debconf stuff here -. /usr/share/debconf/confmodule - -# We need a default smb.conf file. If one doesn't exist we put in place -# one that has some basic defaults. -if [ ! -e /etc/samba/smb.conf ]; then - cp -a /usr/share/samba/smb.conf /etc/samba/ -fi - -# Static tempfile location, dpkg-style -TMPFILE=/etc/samba/smb.conf.dpkg-tmp - -# ------------------------- Debconf questions start --------------------- - -# Is the user configuring with debconf, or he/she prefers swat/manual -# config? -db_get samba-common/do_debconf || true -if [ "${RET}" = "true" ]; then - # Get workgroup name - db_get samba-common/workgroup || true - WORKGROUP="${RET}" - - # Oh my GOD, this is ugly. Why would anyone put these - # characters in a workgroup name? Why, Lord, why??? - WORKGROUP=`echo $WORKGROUP | \ - sed -e's/\\\\/\\\\\\\\/g - s#/#\\\\/#g - s/&/\\\&/g - s/\\\$/\\\\\\\$/g'` - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)workgroup[[:space:]]*=.*/\1workgroup = ${WORKGROUP}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Encrypt passwords? - db_get samba-common/encrypt_passwords || true - ENCRYPT_PASSWORDS="${RET}" - - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)encrypt passwords[[:space:]]*=.*/\1encrypt passwords = ${ENCRYPT_PASSWORDS}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - - # Install DHCP support - db_get samba-common/dhcp && DHCPVAL="$RET" - db_fget samba-common/dhcp applied || true - if [ "$DHCPVAL" = true ] && [ "$RET" != true ] && \ - ! grep -q dhcp.conf /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /wins server[[:space:]]*=/a \\ -\\ -# If we receive WINS server info from DHCP, override the options above. \\ - include = /etc/samba/dhcp.conf -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - elif [ "$RET" != true ] && grep -q dhcp.conf /etc/samba/smb.conf - then - : - # FIXME: here we /delete/ the lines? - fi - # Once we get here, the config has been applied, whatever - # it is. - if [ "$RET" != true ]; then - db_fset samba-common/dhcp applied true - fi - - # Update charset settings? - if ! grep -q "^[[:space:]]*unix charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/character_set || true - UNIXCHARSET="${RET}" - if [ -n "$UNIXCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)character set/\1character set/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*character set[[:space:]]*=/c \\ - unix charset = $UNIXCHARSET - }" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if grep -qi "^[[:space:]]*passdb backend[[:space:]]*=.*unixsam" /etc/samba/smb.conf - then - sed -e 's/^\([[:space:]]*\)passdb backend/\1passdb backend/i - /^[[:space:]]*passdb backend/ { - s/unixsam/guest/i - }' < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - - if ! grep -q "^[[:space:]]*dos charset[[:space:]]*=" /etc/samba/smb.conf - then - db_get samba-common/codepage || true - DOSCHARSET="${RET}" - if [ -n "$DOSCHARSET" ] - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - s/^\([[:space:]]*\)client code page/\1client code page/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { - /^[[:space:]]*client code page[[:space:]]*=/c \\ - dos charset = $DOSCHARSET -}" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - fi - - if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4 \ - && ! grep -q "^[[:space:]]*panic action[[:space:]]*=" /etc/samba/smb.conf - then - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/a \\ -\\ -# Do something sensible when Samba crashes: mail the admin a backtrace\\ - panic action = /usr/share/samba/panic-action %d" < /etc/samba/smb.conf > ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf - fi - -fi - -chmod a+r /etc/samba/smb.conf - -# ------------------------- Debconf questions end --------------------- - -db_stop - -#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba-common.postrm b/packaging/Debian/debian-woody/samba-common.postrm deleted file mode 100644 index 8a4b6d3d55..0000000000 --- a/packaging/Debian/debian-woody/samba-common.postrm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -# -# - -if [ "$1" = purge ]; then - # Remove any files left in /etc/samba/ - rm -Rf /etc/samba/ -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba-common.templates b/packaging/Debian/debian-woody/samba-common.templates deleted file mode 100644 index 9eb0676e93..0000000000 --- a/packaging/Debian/debian-woody/samba-common.templates +++ /dev/null @@ -1,66 +0,0 @@ -Template: samba-common/character_set -Type: string -Description: Character Set for Unix filesystem - You currently have a "character set" configured in your smb.conf. In - Samba 3.0, this option is replaced by a new option, "unix charset". - Please specify the character set you wish to use for theis new option, - which controls how Samba interprets filenames on the file system. - . - If you leave this option blank, your smb.conf will not be changed. - -Template: samba-common/codepage -Type: string -Description: Character Set for DOS clients - You currently have a "client code page" set in your smb.conf. In Samba - 3.0, this option is replaced by the option "dos charset". Please specify - the character set you wish to use for this new option. In most cases, the - default chosen for you will be sufficient. Note that this option is not - needed to support Windows clients, it is only for DOS clients. If you - leave this option blank, your smb.conf will not be changed. - -Template: samba-common/dhcp -Type: boolean -Default: false -Description: Modify smb.conf to use WINS settings from DHCP? - If your computer gets IP address information from a DHCP server on the - network, the DHCP server may also provide information about WINS servers - ("NetBIOS name servers") present on the network. This requires a - change to your smb.conf file so that DHCP-provided WINS settings will - automatically be read from /etc/samba/dhcp.conf. - . - You must have the dhcp3-client package installed to take advantage of this - feature. - -Template: samba-common/do_debconf -Type: boolean -Default: true -Description: Configure smb.conf through debconf? - The rest of the configuration of Samba deals with questions that affect - parameters in /etc/samba/smb.conf, which is the file used to configure the - Samba programs (nmbd and smbd.) Your current smb.conf contains an - 'include' line or an option that spans multiple lines, which could confuse - debconf and require you to edit your smb.conf by hand to get it working - again. - . - If you don't use debconf to configure smb.conf, you will have to handle - any configuration changes yourself, and will not be able to take - advantage of periodic configuration enhancements. Therefore, use of - debconf is recommended if possible. - -Template: samba-common/workgroup -Type: string -Description: Workgroup/Domain Name? - This controls what workgroup your server will appear to be in when queried - by clients. Note that this parameter also controls the Domain name used - with the security=domain setting. - -Template: samba-common/encrypt_passwords -Type: boolean -Default: true -Description: Use password encryption? - Recent Windows clients communicate with SMB servers using encrypted - passwords. If you want to use clear text passwords you will need to change - a parameter in your Windows registry. It is recommended that you use - encrypted passwords. If you do, make sure you have a valid - /etc/samba/smbpasswd file and that you set passwords in there for each - user using the smbpasswd command. diff --git a/packaging/Debian/debian-woody/samba-doc.docs b/packaging/Debian/debian-woody/samba-doc.docs deleted file mode 100644 index d9f0aa1d0a..0000000000 --- a/packaging/Debian/debian-woody/samba-doc.docs +++ /dev/null @@ -1,8 +0,0 @@ -docs/Samba3-HOWTO.pdf -docs/Samba3-ByExample.pdf -docs/Samba3-Developers-Guide.pdf -docs/REVISION -docs/THANKS -docs/history -docs/htmldocs/ -docs/registry/ diff --git a/packaging/Debian/debian-woody/samba-doc.examples b/packaging/Debian/debian-woody/samba-doc.examples deleted file mode 100644 index e71180364c..0000000000 --- a/packaging/Debian/debian-woody/samba-doc.examples +++ /dev/null @@ -1,2 +0,0 @@ -debian/wins2dns.awk -source/smbadduser diff --git a/packaging/Debian/debian-woody/samba.config b/packaging/Debian/debian-woody/samba.config deleted file mode 100644 index 89792d436e..0000000000 --- a/packaging/Debian/debian-woody/samba.config +++ /dev/null @@ -1,92 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -# Function for grabbing a parameter from an smb.conf file -smbconf_retr() { - if [ -z "$1" ]; then - return - fi - - if [ -n "$2" ]; then - local FILE="$2" - fi - - if [ -z "$FILE" ]; then - return - fi - - sed -n -e" - s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ { - s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi - }" $FILE \ - | tail -1 -} - -FILE=/etc/samba/smb.conf - -db_title "Samba Server" - -# Babysit users who don't read README.Debian -if [ -n "$2" ] && dpkg --compare-versions "$2" lt "2.2" -then - db_input medium samba/log_files_moved || true - db_go -fi - -db_input medium samba/run_mode || true -db_go - - -# Offer to move the password database for existing users -if [ "$1" = "configure" -a -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - FILE=/etc/samba/smb.conf - PASSDB="" - if [ -f "$FILE" ]; then - PASSDB=`smbconf_retr "passdb backend"` - fi - TDBPRIORITY=medium - if echo "$PASSDB" | grep -q ldapsam; then - TDBPRIORITY=low - fi - db_get samba-common/do_debconf || true - if [ "${RET}" = "false" ]; then - TDBPRIORITY=low - fi - - db_input "$TDBPRIORITY" samba/tdbsam || true -fi - -# We vary the priority of the next question depending on whether -# the password database already exists... -if [ -e /etc/samba/smbpasswd -o -e /var/lib/samba/passdb.tdb ]; then - PRIORITY="low" -else - # If 'encrypt passwords' is true in smb.conf, and smbpasswd - # does not exist, default to yes here. - FILE=/etc/samba/smb.conf - if [ -f "$FILE" ]; then - ENCRYPT=`smbconf_retr "encrypt passwords"` - if [ "$ENCRYPT" ]; then - ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` - if [ "$ENCRYPT" = "yes" ]; then - ENCRYPT=true - fi - if [ "$ENCRYPT" = "no" ]; then - ENCRYPT=false - fi - fi - db_set samba/generate_smbpasswd "$ENCRYPT" - fi - PRIORITY="medium" -fi - -db_input $PRIORITY samba/generate_smbpasswd || true -db_go diff --git a/packaging/Debian/debian-woody/samba.cron.daily b/packaging/Debian/debian-woody/samba.cron.daily deleted file mode 100644 index 42fc98d8f6..0000000000 --- a/packaging/Debian/debian-woody/samba.cron.daily +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh -# -# cron script to save a backup copy of /etc/samba/smbpasswd in /var/backups. -# -# Written by Eloy A. Paris <peloy@debian.org> for the Debian project. -# - -BAK=/var/backups - -umask 022 -if cd $BAK; then - # Make sure /etc/samba/smbpasswd exists - if [ -f /etc/samba/smbpasswd ]; then - cmp -s smbpasswd.bak /etc/samba/smbpasswd || cp -p /etc/samba/smbpasswd smbpasswd.bak - fi -fi diff --git a/packaging/Debian/debian-woody/samba.dirs b/packaging/Debian/debian-woody/samba.dirs deleted file mode 100644 index 33178f42d2..0000000000 --- a/packaging/Debian/debian-woody/samba.dirs +++ /dev/null @@ -1,9 +0,0 @@ -etc/samba -usr/bin -usr/sbin -usr/lib/samba -var/log/samba -var/lib/samba/printers/W32X86 -var/lib/samba/printers/WIN40 -var/run/samba -var/cache/samba diff --git a/packaging/Debian/debian-woody/samba.docs b/packaging/Debian/debian-woody/samba.docs deleted file mode 100644 index 9a5a9fc6bf..0000000000 --- a/packaging/Debian/debian-woody/samba.docs +++ /dev/null @@ -1,3 +0,0 @@ -Manifest -README -WHATSNEW.txt diff --git a/packaging/Debian/debian-woody/samba.files b/packaging/Debian/debian-woody/samba.files deleted file mode 100644 index cbca5d8e86..0000000000 --- a/packaging/Debian/debian-woody/samba.files +++ /dev/null @@ -1,18 +0,0 @@ -usr/bin/smbstatus -usr/bin/smbcontrol -usr/bin/tdbbackup -usr/bin/pdbedit -usr/bin/profiles -usr/sbin/smbd -usr/sbin/nmbd -usr/sbin/mksmbpasswd -usr/lib/samba/vfs -usr/share/man/man1/smbcontrol.1 -usr/share/man/man1/smbstatus.1 -usr/share/man/man1/profiles.1 -usr/share/man/man5/smbpasswd.5 -usr/share/man/man8/nmbd.8 -usr/share/man/man8/pdbedit.8 -usr/share/man/man8/smbd.8 -usr/share/man/man8/mksmbpasswd.8 -usr/share/man/man8/tdbbackup.8 diff --git a/packaging/Debian/debian-woody/samba.init b/packaging/Debian/debian-woody/samba.init deleted file mode 100644 index 5d0f4671a0..0000000000 --- a/packaging/Debian/debian-woody/samba.init +++ /dev/null @@ -1,83 +0,0 @@ -#!/bin/sh -# -# Start/stops the Samba daemons (nmbd and smbd). -# -# - -# Defaults -RUN_MODE="daemons" - -# Reads config file (will override defaults above) -[ -r /etc/default/samba ] && . /etc/default/samba - -NMBDPID=/var/run/samba/nmbd.pid -SMBDPID=/var/run/samba/smbd.pid - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemons are there -test -x /usr/sbin/nmbd -a -x /usr/sbin/smbd || exit 0 - -case "$1" in - start) - echo -n "Starting Samba daemons:" - - echo -n " nmbd" - start-stop-daemon --start --quiet --exec /usr/sbin/nmbd -- -D - - if [ "$RUN_MODE" != "inetd" ]; then - echo -n " smbd" - start-stop-daemon --start --quiet --exec /usr/sbin/smbd -- -D - fi - - echo "." - ;; - stop) - echo -n "Stopping Samba daemons: " - - start-stop-daemon --stop --quiet --pidfile $NMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $NMBDPID ] && ! ps h `cat $NMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by nmbd itself IMHO.) - rm -f $NMBDPID - fi - echo -n "nmbd" - - if [ "$RUN_MODE" != "inetd" ]; then - start-stop-daemon --stop --quiet --pidfile $SMBDPID - # Wait a little and remove stale PID file - sleep 1 - if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null - then - # Stale PID file (nmbd was succesfully stopped), - # remove it (should be removed by smbd itself IMHO.) - rm -f $SMBDPID - fi - echo -n " smbd" - fi - - echo "." - - ;; - reload) - echo -n "Reloading /etc/samba/smb.conf (smbd only)" - start-stop-daemon --stop --signal HUP --pidfile $SMBDPID - - echo "." - ;; - restart|force-reload) - $0 stop - sleep 1 - $0 start - ;; - *) - echo "Usage: /etc/init.d/samba {start|stop|reload|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 diff --git a/packaging/Debian/debian-woody/samba.logrotate b/packaging/Debian/debian-woody/samba.logrotate deleted file mode 100644 index f90437bf2a..0000000000 --- a/packaging/Debian/debian-woody/samba.logrotate +++ /dev/null @@ -1,21 +0,0 @@ -/var/log/samba/log.smbd { - weekly - missingok - rotate 7 - postrotate - invoke-rc.d --quiet samba reload > /dev/null - endscript - compress - notifempty -} - -/var/log/samba/log.nmbd { - weekly - missingok - rotate 7 - postrotate - [ -f /var/run/samba/nmbd.pid ] && kill -HUP `cat /var/run/samba/nmbd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-woody/samba.pamd b/packaging/Debian/debian-woody/samba.pamd deleted file mode 100644 index 5db2bbd31f..0000000000 --- a/packaging/Debian/debian-woody/samba.pamd +++ /dev/null @@ -1,3 +0,0 @@ -auth required pam_unix.so -account required pam_unix.so -session required pam_unix.so diff --git a/packaging/Debian/debian-woody/samba.postinst b/packaging/Debian/debian-woody/samba.postinst deleted file mode 100644 index 7b0bdd92ad..0000000000 --- a/packaging/Debian/debian-woody/samba.postinst +++ /dev/null @@ -1,228 +0,0 @@ -#!/bin/sh -e -# -# Post-installation script for the Samba package for Debian GNU/Linux -# -# - -case "$1" in - configure) - # continue below - ;; - - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - - *) - echo "postinst called with unknown argument \`$1'" >&2 - exit 0 - ;; -esac - -# Handle debconf -. /usr/share/debconf/confmodule - -INITCONFFILE=/etc/default/samba - -# We generate several files during the postinst, and we don't want -# them to be readable only by root. -umask 022 - - -# Generate configuration file if it does not exist, using default values. -[ -r "${INITCONFFILE}" ] || { - echo Generating ${INITCONFFILE}... >&2 - cat >${INITCONFFILE} <<'EOFMAGICNUMBER1234' -# Defaults for samba initscript -# sourced by /etc/init.d/samba -# installed at /etc/default/samba by the maintainer scripts -# - -# -# This is a POSIX shell fragment -# - -# How should Samba (smbd) run? Possible values are "daemons" -# or "inetd". -RUN_MODE="" -EOFMAGICNUMBER1234 -} - -# --- Begin of FHS migration code --- - -# Starting with Samba 2.2.3-4 the WINS database, the browse -# database and other important run-time files are stored in -# FHS-compliant directories. The following code takes care of -# moving the files in the old directories (/var/samba/ and -# /var/state/samba) to the new FHS-compliant directories. - -if [ -d /var/samba/ ]; then - mv /var/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/samba/ -fi - -# Default for anything we don't know about (see next two 'for' loops) -# is /var/lib/samba -- guaranteed not to accidentally tromp on any -# files the admin thought were safe. -if [ -d /var/state/samba ]; then - mv /var/state/samba/* /var/lib/samba/ 2>/dev/null || true - rmdir /var/state/samba/ - - # It's not FHS, and it's probably our fault this is here, - # so delete it if we can. - rmdir /var/state/ 2> /dev/null || true -fi - -# All these files are now placed in their respective FHS-compliant -# directories. Separate out the individual files accordingly. -for F in browse.dat printing.tdb winbindd_cache.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/cache/samba/ - fi -done - -for F in brlock.tdb connections.tdb locking.tdb messages.tdb nmbd.pid \ - sessionid.tdb smbd.pid unexpected.tdb -do - if [ -e /var/lib/samba/"$F" ]; then - mv /var/lib/samba/"$F" /var/run/samba/ - fi -done - -# Beginning with Samba 2.2.5-1, we also move the domain secrets file -# to a more suitable location, since no one really edits this by hand. -if [ -e /etc/samba/secrets.tdb -a ! -e /var/lib/samba/secrets.tdb ] -then - mv /etc/samba/secrets.tdb /var/lib/samba/ -fi - -# If upgrading from a previous 2.999 snapshot, move the passdb.tdb -# database into /var/lib. - -if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.999+3.0.alpha23-5 \ - && [ -e /etc/samba/passdb.tdb -a ! -e /var/lib/samba/passdb.tdb ] -then - mv /etc/samba/passdb.tdb /var/lib/samba/ -fi - -# --- End of FHS migration code --- - -# If upgrading from a previous 2.999 snapshot, clear the broken -# registry.tdb file. -if [ -n "$2" ] && dpkg --compare-versions "$2" gt 2.99.cvs.20020713-1 \ - && dpkg --compare-versions "$2" lt 2.999+3.0cvs20020805-1 -then - rm -f /var/lib/samba/registry.tdb -fi - -# ------------------------- Debconf questions start --------------------- - -# Run Samba as daemons or from inetd? -db_get samba/run_mode || true -RUN_MODE="${RET}" - -TMPFILE=/etc/default/samba.dpkg-tmp -sed -e "s/^[[:space:]]*RUN_MODE[[:space:]]*=.*/RUN_MODE=\"${RUN_MODE}\"/" \ - < ${INITCONFFILE} >${TMPFILE} -chmod a+r ${TMPFILE} -mv -f ${TMPFILE} ${INITCONFFILE} - -# Generate a smbpasswd file? -db_get samba/generate_smbpasswd || true -GENERATE_SMBPASSWD="${RET}" - -db_get samba/tdbsam || true -PDB_MIGRATE="${RET}" - -# Done with debconf now. -db_stop - -umask 066 - -# FIXME: disable if ldapsam support is enabled? -# FIXME: we don't want to pass these through the smbpasswd backend, -# some of the faking can cause us problems! -if [ "${GENERATE_SMBPASSWD}" = "true" -a ! -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]; then - getent passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd -fi - -umask 022 - -if [ -n "$2" -a -e /etc/samba/smbpasswd \ - -a ! -e /var/lib/samba/passdb.tdb -a "$PDB_MIGRATE" = "true" ] \ - && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 -then - umask 066 - pdbedit -i smbpasswd -e tdbsam - rm /etc/samba/smbpasswd - umask 022 - - # The database has been moved, now make sure we can still find it. - PASSDB=`sed -n -e"s/^[[:space:]]*\[global\]/\[global\]/i - /^\[global\]/,/^[[:space:]]*\[/ \ - s/^[[:space:]]*passdb backend[[:space:]]*=[[:space:]]*//pi" \ - < /etc/samba/smb.conf \ - | tail -n 1` - if echo "$PASSDB" | egrep -q "(^|[[:space:]])smbpasswd"; then - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB=`echo $PASSDB | sed -e's/\(^\|[[:space:]]\)smbpasswd/\1tdbsam/'` - fi - fi - if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then - PASSDB="tdbsam $PASSDB" - fi - TMPFILE=/etc/samba/smb.conf.dpkg-tmp - sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i - /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ - s/^\([[:space:]]*\)passdb backend[[:space:]]*=.*/\1passdb backend = ${PASSDB}/i" \ - < /etc/samba/smb.conf >${TMPFILE} - chmod a+r ${TMPFILE} - mv -f ${TMPFILE} /etc/samba/smb.conf -fi - -# ------------------------- Debconf questions end --------------------- - -# Handle removal of nmbd from inetd.conf, which is no longer a supported -# configuration. -if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4; then - update-inetd --remove netbios-ns -fi - -# We want to add these entries to inetd.conf commented out. Otherwise -# UDP traffic could make inetd to start nmbd or smbd right during -# the configuration stage. -if [ -z "$2" ]; then - update-inetd --add "#<off># netbios-ssn stream tcp nowait root /usr/sbin/tcpd /usr/sbin/smbd" -fi - -if [ "$RUN_MODE" = "daemons" ]; then - update-inetd --disable netbios-ssn -else - update-inetd --enable netbios-ssn -fi - -# This check is a safety net: the /etc/samba/smbpasswd file must have -# permissions 600. -if [ -f /etc/samba/smbpasswd ]; then - chmod 600 /etc/samba/smbpasswd -fi - -# Do the same check for /var/backup/smbpasswd.bak, just in case. -if [ -f /var/backups/smbpasswd.bak ]; then - chmod 600 /var/backups/smbpasswd.bak -fi - -# Delete old /etc/samba/debian_config file, which is not used anymore -# now that we are using debconf. -rm -f /etc/samba/debian_config - -# Move old log files to the new location of Samba's log files -mv -f /var/log/nmb* /var/log/samba/ 2> /dev/null || true -mv -f /var/log/smb* /var/log/samba/ 2> /dev/null || true - -#DEBHELPER# - -exit 0 diff --git a/packaging/Debian/debian-woody/samba.postrm b/packaging/Debian/debian-woody/samba.postrm deleted file mode 100644 index b79fe1d009..0000000000 --- a/packaging/Debian/debian-woody/samba.postrm +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh -e -# -# - -if [ "$1" = purge ]; then - - # Remove Samba's state files, both volatile and non-volatile - rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba - - # Remove log files - rm -Rf /var/log/samba/ - - # Remove init.d configuration file - echo Removing configuration file /etc/default/samba... >&2 - rm -f /etc/default/samba - - # Remove NetBIOS entries from /etc/inetd.conf - update-inetd --remove netbios-ssn - -else - # Not purging, do not remove NetBIOS entries from /etc/inetd.conf - update-inetd --disable netbios-ssn - -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba.prerm b/packaging/Debian/debian-woody/samba.prerm deleted file mode 100644 index ab62c706d8..0000000000 --- a/packaging/Debian/debian-woody/samba.prerm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh -e - -if [ "$1" = upgrade -a -n "$2" ] && dpkg --compare-versions "$2" lt 2.99 \ - && [ -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ] -then - pdbedit -i tdbsam -e smbpasswd - rm -f /var/lib/samba/passdb.tdb -fi - -#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba.templates b/packaging/Debian/debian-woody/samba.templates deleted file mode 100644 index e7fcd1d4cc..0000000000 --- a/packaging/Debian/debian-woody/samba.templates +++ /dev/null @@ -1,50 +0,0 @@ -Template: samba/generate_smbpasswd -Type: boolean -Default: false -Description: Create samba password database, /var/lib/samba/passdb.tdb? - To be compatible with the defaults in most versions of Windows, Samba must - be configured to use encrypted passwords. This requires user passwords to - be stored in a file separate from /etc/passwd. This file can be created - automatically, but the passwords must be added manually (by you or the - user) by running smbpasswd, and you must arrange to keep it up-to-date in - the future. If you do not create it, you will have to reconfigure samba - (and probably your client machines) to use plaintext passwords. See - /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc - package for more details. - -Template: samba/log_files_moved -Type: note -Description: Samba's log files have moved. - Starting with the first packages of Samba 2.2 for Debian the log files for - both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The - names of the files are log.nmbd and log.smbd, for nmbd and smbd - respectively. - . - The old log files that were in /var/log/ will be moved to the new location - for you. - -Template: samba/nmbd_from_inetd -Type: note -Description: Running nmbd from inetd is no longer supported - Your system was previously configured to start nmbd and smbd from inetd. - As of version 2.999+3.0.alpha20-4, nmbd will no longer be started from - inetd. If you have modified your /etc/init.d/samba startup script, you - may need to adjust it by hand now so that nmbd will start. - -Template: samba/run_mode -Type: select -Choices: daemons, inetd -Default: daemons -Description: How do you want to run Samba? - The Samba daemon smbd can run as a normal daemon or from inetd. Running as - a daemon is the recommended approach. - -Template: samba/tdbsam -Type: boolean -Default: false -Description: Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb? - Samba 3.0 introduces a newer, more complete SAM database interface which - supersedes the /etc/samba/smbpasswd file. Would you like your existing - smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you - plan to use another pdb backend (e.g., LDAP) instead, you should answer - 'no' here. diff --git a/packaging/Debian/debian-woody/scripts/patch-source b/packaging/Debian/debian-woody/scripts/patch-source deleted file mode 100755 index a8559b4167..0000000000 --- a/packaging/Debian/debian-woody/scripts/patch-source +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -e -# -# - -for patch in debian/patches/*.patch; do - echo '->'`basename $patch`: - patch -p1 --ignore-whitespace < $patch -done - -# This code is currently not used because it creates a long version -# number string. For now we're sticking to <upstream version>-Debian, -# as in 3.0.0rc2-Debian. peloy@debian.org.- - -# ---- Begin unused code ---- -# Get Debian version number from 1st line of the Debian changelog -#DEBIAN_VERSION=`sed -n -e '1s/^.*(\(.*\)).*$/\1/p' debian/changelog` - -# Insert Debian version number in source/VERSION, which will then be -# used to create source/include/version.h. -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1\"Debian-${DEBIAN_VERSION}\"/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION -# ---- End unused code ---- - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) - -exit 0 diff --git a/packaging/Debian/debian-woody/scripts/unpatch-source b/packaging/Debian/debian-woody/scripts/unpatch-source deleted file mode 100755 index d3681cfa50..0000000000 --- a/packaging/Debian/debian-woody/scripts/unpatch-source +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh -e -# -# - -# We want to reverse the patches in the opposite order we applied -# them, hence the 'ls|sort -r'. -for patch in `ls debian/patches/*.patch | sort -r`; do - patch -p1 -R --ignore-whitespace < $patch -done - -# Unused code. See comment in the patch-source script. - -#TMPFILE=source/VERSION.debian -#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1/" source/VERSION > ${TMPFILE} -#mv -f ${TMPFILE} source/VERSION - -# Regenerate configure only if it is older than configure.in -[ source/configure -ot source/configure.in ] && (cd source && autoheader && autoconf) - -exit 0 diff --git a/packaging/Debian/debian-woody/smb.conf b/packaging/Debian/debian-woody/smb.conf deleted file mode 100644 index 18f55f3a71..0000000000 --- a/packaging/Debian/debian-woody/smb.conf +++ /dev/null @@ -1,237 +0,0 @@ -# -# Sample configuration file for the Samba suite for Debian GNU/Linux. -# -# -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options most of which -# are not shown in this example -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentary and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command -# "testparm" to check that you have not many any basic syntactic -# errors. -# - -#======================= Global Settings ======================= - -[global] - -## Browsing/Identification ### - -# Change this to the workgroup/NT-domain name your Samba server will part of - workgroup = DEBIAN_FANS - -# server string is the equivalent of the NT Description field - server string = %h server (Samba %v) - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable its WINS Server -; wins support = no - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# This will prevent nmbd to search for NetBIOS names through DNS. - dns proxy = no - -# What naming service and in what order should we use to resolve host names -# to IP addresses -; name resolve order = lmhosts host wins bcast - - -#### Debugging/Accounting #### - -# This tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 1000 - -# If you want Samba to only log through syslog then set the following -# parameter to 'yes'. -; syslog only = no - -# We want Samba to log a minimum amount of information to syslog. Everything -# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log -# through syslog you should set the following parameter to something higher. - syslog = 0 - -# Do something sensible when Samba crashes: mail the admin a backtrace - panic action = /usr/share/samba/panic-action %d - - -####### Authentication ####### - -# "security = user" is always a good idea. This will require a Unix account -# in this server for every user accessing the server. See -# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc -# package for details. -; security = user - -# You may wish to use password encryption. See the section on -# 'encrypt passwords' in the smb.conf(5) manpage before enabling. - encrypt passwords = no - -# If you are using encrypted passwords, Samba will need to know what -# password database type you are using. - passdb backend = tdbsam - - obey pam restrictions = yes - -; guest account = nobody - invalid users = root - -# This boolean parameter controls whether Samba attempts to sync the Unix -# password with the SMB password when the encrypted SMB password in the -# passdb is changed. -; unix password sync = no - -# For Unix password sync to work on a Debian GNU/Linux system, the following -# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for -# sending the correct chat script for the passwd program in Debian Potato). - passwd program = /usr/bin/passwd %u - passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . - -# This boolean controls whether PAM will be used for password changes -# when requested by an SMB client instead of the program listed in -# 'passwd program'. The default is 'no'. -; pam password change = no - - -########## Printing ########## - -# If you want to automatically load your printer list rather -# than setting them up individually then you'll need this -; load printers = yes - -# lpr(ng) printing. You may wish to override the location of the -# printcap file -; printing = bsd -; printcap name = /etc/printcap - -# CUPS printing. See also the cupsaddsmb(8) manpage in the -# cupsys-client package. -; printing = cups -; printcap name = cups - -# When using [print$], root is implicitly a 'printer admin', but you can -# also give this right to other users to add drivers and set printer -# properties -; printer admin = @ntadmin - - -######## File sharing ######## - -# Name mangling options -; preserve case = yes -; short preserve case = yes - - -############ Misc ############ - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting -; include = /home/samba/etc/smb.conf.%m - -# Most people will find that this option gives better performance. -# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html -# for details -# You may want to add the following on a Linux system: -# SO_RCVBUF=8192 SO_SNDBUF=8192 - socket options = TCP_NODELAY - -# The following parameter is useful only if you have the linpopup package -# installed. The samba maintainer and the linpopup maintainer are -# working to ease installation and configuration of linpopup and samba. -; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & - -# Domain Master specifies Samba to be the Domain Master Browser. If this -# machine will be configured as a BDC (a secondary logon server), you -# must set this to 'no'; otherwise, the default behavior is recommended. -; domain master = auto - -# Some defaults for winbind (make sure you're not using the ranges -# for something else.) -; idmap uid = 10000-20000 -; idmap gid = 10000-20000 -; template shell = /bin/bash - -#======================= Share Definitions ======================= - -[homes] - comment = Home Directories - browseable = no - -# By default, the home directories are exported read-only. Change next -# parameter to 'yes' if you want to be able to write to them. - writable = no - -# File creation mask is set to 0700 for security reasons. If you want to -# create files with group=rw permissions, set next parameter to 0775. - create mask = 0700 - -# Directory creation mask is set to 0700 for security reasons. If you want to -# create dirs. with group=rw permissions, set next parameter to 0775. - directory mask = 0700 - -# Un-comment the following and create the netlogon directory for Domain Logons -# (you need to configure Samba to act as a domain controller too.) -;[netlogon] -; comment = Network Logon Service -; path = /home/samba/netlogon -; guest ok = yes -; writable = no -; share modes = no - -[printers] - comment = All Printers - browseable = no - path = /tmp - printable = yes - public = no - writable = no - create mode = 0700 - -# Windows clients look for this share name as a source of downloadable -# printer drivers -[print$] - comment = Printer Drivers - path = /var/lib/samba/printers - browseable = yes - read only = yes - guest ok = no -# Uncomment to allow remote administration of Windows print drivers. -# Replace 'ntadmin' with the name of the group your admin users are -# members of. -; write list = root, @ntadmin - -# A sample share for sharing your CD-ROM with others. -;[cdrom] -; comment = Samba server's CD-ROM -; writable = no -; locking = no -; path = /cdrom -; public = yes - -# The next two parameters show how to auto-mount a CD-ROM when the -# cdrom share is accesed. For this to work /etc/fstab must contain -# an entry like this: -# -# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 -# -# The CD-ROM gets unmounted automatically after the connection to the -# -# If you don't want to use auto-mounting/unmounting make sure the CD -# is mounted on /cdrom -# -; preexec = /bin/mount /cdrom -; postexec = /bin/umount /cdrom - diff --git a/packaging/Debian/debian-woody/smbclient.files b/packaging/Debian/debian-woody/smbclient.files deleted file mode 100644 index 96e8945bf3..0000000000 --- a/packaging/Debian/debian-woody/smbclient.files +++ /dev/null @@ -1,15 +0,0 @@ -usr/bin/smbclient -usr/bin/smbtar -usr/bin/rpcclient -usr/bin/smbspool -usr/bin/smbtree -usr/bin/smbcacls -usr/bin/smbcquotas -usr/share/man/man1/smbclient.1 -usr/share/man/man1/smbtar.1 -usr/share/man/man1/rpcclient.1 -usr/share/man/man8/smbspool.8 -usr/share/man/man1/smbcacls.1 -usr/share/man/man1/smbcquotas.1 -usr/share/man/man1/smbtree.1 -usr/lib/cups/backend/smb diff --git a/packaging/Debian/debian-woody/smbfs.files b/packaging/Debian/debian-woody/smbfs.files deleted file mode 100644 index 870db7d645..0000000000 --- a/packaging/Debian/debian-woody/smbfs.files +++ /dev/null @@ -1,10 +0,0 @@ -sbin/mount.smbfs -sbin/mount.smb -usr/bin/smbmount -usr/bin/smbumount -usr/bin/smbmnt -usr/share/man/man8/smbmount.8 -usr/share/man/man8/smbumount.8 -usr/share/man/man8/smbmnt.8 -usr/share/man/man8/mount.smb.8 -usr/share/man/man8/mount.smbfs.8 diff --git a/packaging/Debian/debian-woody/smbwrapper.dirs b/packaging/Debian/debian-woody/smbwrapper.dirs deleted file mode 100644 index fd727bddf0..0000000000 --- a/packaging/Debian/debian-woody/smbwrapper.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/bin -usr/share/samba diff --git a/packaging/Debian/debian-woody/smbwrapper.docs b/packaging/Debian/debian-woody/smbwrapper.docs deleted file mode 100644 index 2924e78734..0000000000 --- a/packaging/Debian/debian-woody/smbwrapper.docs +++ /dev/null @@ -1,2 +0,0 @@ -source/smbwrapper/README -source/smbwrapper/PORTING diff --git a/packaging/Debian/debian-woody/smbwrapper.files b/packaging/Debian/debian-woody/smbwrapper.files deleted file mode 100644 index 08edbead6e..0000000000 --- a/packaging/Debian/debian-woody/smbwrapper.files +++ /dev/null @@ -1 +0,0 @@ -usr/bin/smbsh diff --git a/packaging/Debian/debian-woody/swat.config b/packaging/Debian/debian-woody/swat.config deleted file mode 100644 index e210fae55e..0000000000 --- a/packaging/Debian/debian-woody/swat.config +++ /dev/null @@ -1,11 +0,0 @@ -#/bin/sh -e -# -# - -# Source debconf library. -. /usr/share/debconf/confmodule - -db_title "Samba Web Administration Tool (SWAT)" - -db_input medium swat/smb_conf_warn || true -db_go diff --git a/packaging/Debian/debian-woody/swat.dirs b/packaging/Debian/debian-woody/swat.dirs deleted file mode 100644 index d5df7df4b8..0000000000 --- a/packaging/Debian/debian-woody/swat.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/sbin -usr/share/samba/swat diff --git a/packaging/Debian/debian-woody/swat.files b/packaging/Debian/debian-woody/swat.files deleted file mode 100644 index 82fdf104d3..0000000000 --- a/packaging/Debian/debian-woody/swat.files +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin/swat -usr/share/samba/swat -usr/share/man/man8/swat.8 diff --git a/packaging/Debian/debian-woody/swat.postinst b/packaging/Debian/debian-woody/swat.postinst deleted file mode 100644 index 338f8a07c2..0000000000 --- a/packaging/Debian/debian-woody/swat.postinst +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -case "$1" in - configure) - ;; - abort-upgrade|abort-remove|abort-deconfigure) - exit 0 - ;; - *) - echo "$0: Unknown action \"$1\"" - exit 0 - ;; -esac - -# Set up swat, turned off by default. -update-inetd --group OTHER --add \ - '#<off># swat\t\tstream\ttcp\tnowait.400\troot\t/usr/sbin/tcpd\t/usr/sbin/swat' - -#DEBHELPER# diff --git a/packaging/Debian/debian-woody/swat.postrm b/packaging/Debian/debian-woody/swat.postrm deleted file mode 100644 index 6bc5873096..0000000000 --- a/packaging/Debian/debian-woody/swat.postrm +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# -# - -case "$1" in - purge) - update-inetd --remove '/usr/sbin/swat$' - ;; - remove) - ;; - upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) - ;; - *) - echo "$0: unknown action \"$1\"" - exit 0 - ;; -esac - -#DEBHELPER# - -exit 0 - diff --git a/packaging/Debian/debian-woody/swat.templates b/packaging/Debian/debian-woody/swat.templates deleted file mode 100644 index 0e6ac9f106..0000000000 --- a/packaging/Debian/debian-woody/swat.templates +++ /dev/null @@ -1,6 +0,0 @@ -Template: swat/smb_conf_warn -Type: note -Description: Your smb.conf will be re-written! - SWAT will rewrite your smb.conf file. It will rearrange the entries and - delete all comments, include= and copy= options. If you have a carefully - crafted smb.conf then back it up or don't use SWAT! diff --git a/packaging/Debian/debian-woody/winbind.dirs b/packaging/Debian/debian-woody/winbind.dirs deleted file mode 100644 index 1da8fba83a..0000000000 --- a/packaging/Debian/debian-woody/winbind.dirs +++ /dev/null @@ -1 +0,0 @@ -usr/share/lintian/overrides diff --git a/packaging/Debian/debian-woody/winbind.files b/packaging/Debian/debian-woody/winbind.files deleted file mode 100644 index fbb76774d4..0000000000 --- a/packaging/Debian/debian-woody/winbind.files +++ /dev/null @@ -1,9 +0,0 @@ -usr/sbin/winbindd -usr/bin/wbinfo -usr/bin/ntlm_auth -usr/share/man/man1/wbinfo.1 -usr/share/man/man1/ntlm_auth.1 -usr/share/man/man8/winbindd.8 -lib/security/pam_winbind.so -lib/libnss_winbind.so.2 -lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-woody/winbind.init b/packaging/Debian/debian-woody/winbind.init deleted file mode 100644 index 2dfdf3b835..0000000000 --- a/packaging/Debian/debian-woody/winbind.init +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -# -# Start/stops the winbindd daemon. -# -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -DAEMON=/usr/sbin/winbindd - -# clear conflicting settings from the environment -unset TMPDIR - -# See if the daemon is there -test -x $DAEMON || exit 0 - -case "$1" in - start) - echo -n "Starting the Winbind daemon: winbindd" - - start-stop-daemon --start --quiet --exec $DAEMON - - echo "." - ;; - stop) - echo -n "Stopping the Winbind daemon: winbindd" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - - echo "." - ;; - restart|force-reload) - echo -n "Restarting the Winbind daemon: winbindd" - - start-stop-daemon --stop --quiet --oknodo --exec $DAEMON - sleep 2 - start-stop-daemon --start --quiet --exec $DAEMON - - echo "." - ;; - *) - echo "Usage: /etc/init.d/winbind {start|stop|restart|force-reload}" - exit 1 - ;; -esac - -exit 0 - diff --git a/packaging/Debian/debian-woody/winbind.lintian b/packaging/Debian/debian-woody/winbind.lintian deleted file mode 100644 index fca17d3cca..0000000000 --- a/packaging/Debian/debian-woody/winbind.lintian +++ /dev/null @@ -1,6 +0,0 @@ -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_winbind.so lib/libnss_winbind.so.2 libnss_winbind.so -winbind: ldconfig-symlink-missing-for-shlib lib/libnss_wins.so lib/libnss_wins.so.2 libnss_wins.so -winbind: no-shlibs-control-file lib/libnss_winbind.so.2 -winbind: no-shlibs-control-file lib/libnss_wins.so.2 -winbind: postinst-must-call-ldconfig lib/libnss_wins.so.2 -winbind: postrm-should-call-ldconfig lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-woody/winbind.logrotate b/packaging/Debian/debian-woody/winbind.logrotate deleted file mode 100644 index e36cd1281c..0000000000 --- a/packaging/Debian/debian-woody/winbind.logrotate +++ /dev/null @@ -1,10 +0,0 @@ -/var/log/samba/log.winbindd { - weekly - missingok - rotate 7 - postrotate - [ -f /var/run/samba/winbindd.pid ] && kill -HUP `cat /var/run/samba/winbindd.pid` - endscript - compress - notifempty -} diff --git a/packaging/Debian/debian-woody/wins2dns.awk b/packaging/Debian/debian-woody/wins2dns.awk deleted file mode 100644 index 176868a115..0000000000 --- a/packaging/Debian/debian-woody/wins2dns.awk +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/awk -f -# -# Date: Wed, 26 Aug 1998 10:37:39 -0600 (MDT) -# From: Jason Gunthorpe <jgg@deltatee.com> -# To: samba@packages.debian.org -# Subject: Nifty samba script -# -# Here is a really nifty script I just wrote for samba, it takes the wins -# database in /var/samba/wins and writes out two dns files for it. In this -# way network wide wins clients can get into the dns for use by unix -# machines. -# -# Perhaps this could be included in /usr/doc/examples or somesuch. -# - -BEGIN { - FS="#|\""; -FORWARD="/tmp/wins.hosts" -REVERSE="/tmp/wins.rev" -DOMAIN="ven.ra.rockwell.com" -} -$3 == "00" { - split($4,a," " ); - split(a[2],b,"."); - while (sub(" ","-",$2)); - $2=tolower($2); - if (b[1] == "255") - next; - if (length($2) >= 8) - print $2"\ta\t"a[2] > FORWARD - else - print $2"\t\ta\t"a[2] > FORWARD - print b[4]"."b[3]"\t\tptr\t"$2"."DOMAIN"." > REVERSE -} -END { - system("echo killall -HUP named"); -} - |